Rheem Residential
pocket guide
G A S , E L E C T R I C & S O L A R TA N K T Y P E
❘
TA N K L E S S
❘
ON-LINE PRODUCT GUIDE: RHEEM.COM
Rheem National Customer Service 334-260-1500 CUSTOMER SERVICE, WARRANTY, PARTS ___ 1-800-621-5622 FAX __________________________________ 1-800-535-9538 TECHNICAL SERVICE (1-800-432-8373) _____ 1-800-HEATER3 WEBSITE ______________________________ rheem.com DIVISION OFFICE _______________________
Rheem Water Heating 101 Bell Road Montgomery Alabama 36117-4305 In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
Printed in U.S.A.
Form No. 105-61 Rev. 18
05/06 WP
Table of Contents GAS • Tankless 7.4...............................2-3 • Tankless 4.2...............................4-5 • Professional GUARDIAN SYSTEM ...........6-7 • Professional Heavy Duty ...........8-9 • Fury GUARDIAN SYSTEM ...................10-11 • Fury Heavy Duty....................12-13 • PowerVent GUARDIAN SYSTEM .........14-15 • PowerVent HIGH EFFICIENCY ...........16-17 • Fury Direct Vent .....................18-19 • Warrior MANUFACTURED HOUSING ...........20-21 • Warrior DV MANUFACTURED HOUSING .....22-23 • Warrior DVX MANUFACTURED HOUSING ..24-25
ELECTRIC • Professional ...........................26-27 • Marathon................................28-29 • Fury........................................30-31 • Warrior MANUFACTURED HOUSING ...........32-33 • Marathon Point-of-Use...........34-35 • Point-of-Use ...........................36-37 • Table Top................................38-38 SOLAR • Solaraide................................40-41 • Solaraide HE..........................42-43
MISCELLANEOUS • ProtectionPlus .............................44 • Lifeguard Electric Element..........45 • EverKleen....................................46 • Accessories.................................47 • Therm-X-Guard...........................48
RHEEM NATIONAL CUSTOMER SERVICE SEE BACK COVER
1
High Volume Tankless Gas Water Heater – 7.4 Gallons Per Minute Indoor and Outdoor Models Available 10-Year Limited Warranty on Heat Exchanger* 3-Year Limited Warranty on Parts*
• Continuous hot water – 7.4 gallons per minute at a 45° F rise • Energy saving design • Compact, space saving design • Intelligent electronic controls designed to increase energy efficiency and safety • Self diagnostic program • Digital display shows temperature setting and maintenance codes on remote control • Exclusive oxygen depletion sensor • Exclusive film wrap overheat limiter • Built-in electric blower • Indoor units use 4" Category III stainless steel vents and vent horizontally or vertically • Maximum horizontal or vertical vent run is 47
Qualifies for up to a $300 Energy Tax Credit!
feet 6 inches including one 90 degree elbow
DESCRIPTION
FEATURES
1121 requirements (pending certification)
* See Residential Warranty Information Brochure for complete warranty information. Energy Factor and Average Annual Operating Costs based on D.O.E. (Department of Energy) test procedures. D.O.E. national average fuel rate natural gas 91¢/therm; LP $1.23/gallon.
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
MODEL NUMBER
GAS INPUT BTU/HR.
RTG-74PVN (NAT. GAS)
19,000 199,900
Indoor
100° to 140° F
4.2
7.4
3/4
RTG-74PVP (LP GAS)
19,000 199,900
Indoor
100° to 140° F
4.2
7.4
RTG-74XN (NAT. GAS)
19,000 199,900 Outdoor
100° to 140° F
4.2
RTG-74XP (LP GAS)
19,000 199,900 Outdoor
100° to 140° F
4.2
TYPE
• Indoor models supplied with a 120 volt power cord • Supplied remote control (USC1-117) allows temp. settings up to 120˚ F • Optional remote control (UMC-117) allows temp. settings up to 140˚ F • Indoor and outdoor models feature freeze protection to -30° F • Low NOx emissions meet SCAQMD rule
WATER FLOW RATE TEMP. GPM @ 77° GPM @ 45° RANGE* RISE MAX. RISE MAX.
®
ENERGY INFO.
HEIGHT
WIDTH
DEPTH
VENT
SHIP. WEIGHT (LBS.)
3/4
25-3/8
14-7/8
11-1/8
4
55
.82
$167
3/4
3/4
25-3/8
14-7/8
11-1/8
4
55
.82
$246
7.4
3/4
3/4
25-3/8
14-7/8
11-1/8
N/A
55
.82
$167
7.4
3/4
3/4
25-3/8
14-7/8
11-1/8
N/A
55
.82
$246
CONNECTION WATER GAS
Factory set maximum temperature is 120° F with supplied USC1-117 remote control. For temperatures up to 140˚ F, remote control (UMC-117) is required – sold separately. • For installations above 3,280 feet a high altitude chip is required. Refer to Rheem price list or consult factory for details. • Consult factory for information on sizing the application *
Maximum Hot Water Flow Rate and Temperature Rise Temp. Rise (°F)
45
50
60
70
80
90
100
Water Flow (GPM)
7.4
6.7
5.6
4.8
4.2
3.7
3.3
ENERGY FACTOR
EST. ANN. OPERATING COST
Indoor models vent horizontally or vertically This water heater has a built-in electric blower to force exhaust gas to the outside. Category III stainless steel vent (UL1738 certified) is required in order to avoid damage from possible condensation. Side-wall Type “B” vents are not Side-wall permitted.
Minimum flow rate required to initiate heating cycle .66 gpm. 3
Tankless Gas Water Heater – 4.2 Gallons Per Minute Indoor Models 10-Year Limited Warranty on Heat Exchanger* 3-Year Limited Warranty on Parts*
• Continuous hot water – 4.2 gallons
Qualifies for up to a $300 Energy Tax Credit!
DESCRIPTION
FEATURES
inches including one 90 degree elbow • Uses 3" Category III stainless steel vent • Supplied with a 120 volt power cord • Low NOx emissions meet SCAQMD rule 1121 requirements * See Residential Warranty Information Brochure for complete warranty information. Energy Factor and Average Annual Operating Costs based on D.O.E. (Department of Energy) test procedures. D.O.E. national average fuel rate natural gas 91¢/therm; LP $1.23/gallon.
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
MODEL NUMBER
GAS INPUT BTU/HR.
RTG-42PVN (NAT. GAS)
31,500 118,000
Indoor
100° to 140° F
2.4
4.2
3/4
RTG-42PVP (LP GAS)
31,500 118,000
Indoor
100° to 140° F
2.4
4.2
3/4
TYPE
• Vents horizontally or vertically • Maximum vent run is 36 feet 2
per minute at a 45° F rise • Energy saving design • Compact, space saving design • Intelligent electronic controls designed to increase energy efficiency and safety • Self diagnostic program • Digital display shows temperature setting and maintenance codes • Exclusive oxygen depletion sensor • Exclusive film wrap overheat limiter • Built-in electric blower
WATER FLOW RATE TEMP. GPM @ 77° GPM @ 45° RANGE* RISE MAX. RISE MAX.
HEIGHT
WIDTH
DEPTH
VENT
1/2
22-1/4
13-3/4
5-1/8
3
35
.81
$168
1/2
22-1/4
13-3/4
5-1/8
3
35
.81
$250
ENERGY FACTOR
EST. ANN. OPERATING COST
Venting
Maximum Hot Water Flow Rate and Temperature Rise Temp. Rise (°F)
45
50
60
70
80
90
100
Water Flow (GPM)
4.2
3.8
3.2
2.7
2.4
2.1
1.9
Minimum flow rate required to initiate heating cycle .92 gpm.
ENERGY INFO. SHIP. WEIGHT (LBS.)
CONNECTION WATER GAS
* Factory set maximum temperature is 120° F. • For installations above 3,280 feet a high altitude chip is required. Refer to Rheem price list or consult factory for details. • Consult factory for information on sizing the application
®
This water heater has a built-in electric blower to force the exhaust gas to the outside. 3" Category III stainless steel vent (UL1738 certified) is required in order to avoid damage from possible condensation. A RTG20000BM vent adapter or equivalent approved vent adapter is required for vent connection. Contact distributor or factory for price and availability.
5
Professional™ Now with the Guardian System
™
Available in 40 and 50 Gallon Tall – 40 Gallon Short Gas Models 8-Year* Limited Tank and Parts Warranty with a Professional Installation. With ProtectionPlus™ the 8-Year Limited Tank Warranty Becomes 12 Years! SEE PAGE 44.
Get
4 MORE YEARS with ProtectionPlus™
Guardian System™ • One-of-a-kind air/fuel shut-off device offers double protection • Maintenance free – no filter to clean • Standard replacement parts Environmentally Friendly Burner • Low NOx design for low nitrous oxide emissions Self-Cleaning • EverKleen™ patented system fights sediment build-up • Reduces fuel costs • Provides more hot water Easy to Light • No matches required Energy Efficient • More hot water at low operating cost
DESCRIPTION T Y P E
T A L L
SHORT
GAL. CAP.
MODEL NUMBER
FEATURES GAS INPUT IN THOUS. BTU/HR. NAT. LP
RECOVERY IN G.P.H. 90° RISE NAT. LP
High Altitude Compliant • All models are certified for applications up to 6,000 feet above sea level. Some models are certified up to 10,200 feet above sea level. Check factory for listing Longer Life • Patented magnesium anode rod design incorporates a special resistor that protects the tank from rust Plus… • Brass drain valve and temperature and pressure relief valve are included • Meets or exceeds National Appliance Energy Conservation Act (NAECA) requirements * See Residential Warranty Information Brochure for complete warranty information. ®
Energy Factor and Average Annual Operating Costs based on D.O.E. (Department of Energy) test procedures. D.O.E. national average fuel rate natural gas 91¢/therm; LP $1.23/gallon.
ROUGHING IN DIMENSIONS (SHOWN IN INCHES) FIRST HOUR DEL. G.P.H. NAT.
HT. TO VENT
TANK HT.
DIAM.
HT. TO GAS CONN.
VENT SIZE
WATER CONN. CNTR.
HT. TO SIDE T&P
ENERGY INFO. WATER CONN.
SHIP. WT. (LBS)
ENERGY FACTOR NAT.
AVG. ANN. OPER. COST NAT.
40
22V40 PROF
38
–
38.4
–
73
61-3/4
58-3/8
18-1/8
14-1/2
3
8
52-1/4
3/4
120
0.59
$231
38
42V40 PROF
40
34
40.4
34.3
68
61-1/2
57-3/4
19-3/4
14-1/2
3
8
52-1/4
3/4
125
0.60
$227
40
RHG PRO40-40F
40
34
40.4
34.3
68
63-1/4
59-3/4
21
14-1/2
3
8
53-1/2
3/4
135
0.62
$220
50
22V50 PROF
38
–
38.4
–
90
61-1/2
58-1/4
20-1/8
14-1/2
3
8
51-3/8
3/4
130
0.58
$235
50
42V50-40 PROF
40
36
40.4
36.4
83
61-1/2
58
21-3/4
14-1/2
3
8
52-1/2
3/4
150
0.58
$235
50
RHG PRO50-40F
40
36
40.4
36.4
83
62-1/4
58-3/4
23
14-1/2
3
8
52-1/2
3/4
165
0.62
$220
50
RHG PRO50-50F
50
–
50.5
–
83
62
58
21-3/4
14-1/2
4
8
52-1/2
3/4
150
0.58
$235
40
42V40SPROF
40
36
40.4
36.4
72
53-7/8
50-1/2
20-1/8
14-1/2
3
8
44
3/4
130
0.59
$231
50
42V50SPROF
40
36
40.4
36.4
84
54-1/4
49-3/4
22-1/4
14-1/2
3
8
44
3/4
158
0.59
$231
SPECIFY LP GAS WHEN ORDERING. Add “P” suffix to the model number. Example: RHG PRO40-40PF. • For SCAQMD rule 1121 compliance models (California only), add “SQ” suffix to the model number. Example: 22V40 PROFSQ.
Rheem Guardian System Features…
Exclusive Combustion Shut-off System
Flame Arrestor Plate
Maintenance Free
Should a spill incident occur, the Guardian System shuts off the gas supply and the air supply preventing a sustained vapor burn in the combustion chamber.
A specially-designed flame arrestor prevents ignition of vapors outside the combustion chamber.
Superior air filtration prevents the flame arrestor from becoming clogged by lint, dust and oil.
7
Professional™ Heavy Duty Gas Water Heaters Available in 60, 75 and 100 Gallon Tall Gas Models 8-Year* Limited Tank and Parts Warranty with a Professional Installation. With ProtectionPlus™ the 8-Year Limited Tank Warranty Becomes 12 Years! SEE PAGE 44.
Get
4 MORE YEARS with ProtectionPlus™
• Designed for high volume applications • High BTU input for fast recovery • Extra durable brass drain valve • Heat saving flue baffle design • Temperature and pressure relief valve
T A L L
GAL. CAP.
Energy Conservation Act (NAECA) requirements
* See Residential Warranty Information Brochure for complete warranty information.
included • Extra durable high temperature dip tube to meet the most stringent plumbing codes
DESCRIPTION T Y P E
• Meets or exceeds National Appliance
MODEL NUMBER
FEATURES GAS INPUT IN THOUS. BTU/HR. NAT. LP
RECOVERY IN G.P.H. 90° RISE NAT. LP
®
Energy Factor and Average Annual Operating Costs based on D.O.E. (Department of Energy) test procedures. D.O.E. national average fuel rate natural gas 91¢/therm; LP $1.23/gallon.
ROUGHING IN DIMENSIONS (SHOWN IN INCHES) FIRST HOUR DEL. G.P.H. NAT. LP
HT. TO VENT
TANK HT.
DIAM.
HT. TO GAS CONN.
VENT SIZE
WATER CONN. CNTR.
ENERGY INFO.
HT. TO SIDE T&P
WATER CONN.
SHIP. WT. (LBS)
ENERGY FACTOR NAT.
AVG. ANN. OPER. COSTS NAT.
60
RHG PRO60-50NT*
50
50
50.5
50.5
106
106
60
56
23
13-1/4
4
8
48-1/2
3/4
180
0.56
$244
75
RHG PRO75-70N*
70
69
70.7
69.7
109
109
64-1/2
60-1/2
26-1/4
14-3/4
4
11
54-1/2
1
320
0.53
$257
100
RHG PRO100-75
75
69
75.8
69.7
135
135
68
64
26-1/4
14-3/4
4
11
58
1
350
0.48
$284
100
RHG PRO100-73N*
73
–
73.7
–
116
–
68
64
26-1/4
14-3/4
4
11
58
1
350
0.48
$284
* SCAQMD rule 1121 compliance models. • Specify LP gas when ordering. Add “P” suffix to the model number: Example: RHG PRO75-70P.
Exclusive Professional Installation Warranty When this Rheem PROFESSIONAL water heater is installed by a licensed contractor, the consumer can upgrade his limited tank and parts warranty from 6 to 8 years by returning to Rheem the warranty registration card and a copy of the contractor’s invoice. This Rheem exclusive warranty upgrade feature enhances your value as a plumbing professional. A professional installation is a better installation. Refer to the warranty certificate enclosed with each heater for specific details. 9
Fury Now with the Guardian System
™
Available in 30, 40, 50 Gallon Tall – 30 and 40 Gallon Short Models 6-Year Limited Tank and Parts Warranty* With ProtectionPlus™ the 6-Year Limited Tank Warranty Becomes 10 Years! SEE PAGE 44.
Get
4 MORE YEARS with ProtectionPlus™
Guardian System™ • One-of-a-kind air/fuel shut-off device offers double protection • Maintenance free – no filter to clean • Standard replacement parts Environmentally Friendly Burner • Low NOx design for low nitrous oxide emissions Self-Cleaning • EverKleen™ patented system fights sediment build-up • Reduces fuel costs • Provides more hot water Easy to Light • No matches required Energy Efficient • More hot water at low operating cost Longer Life • Patented magnesium anode rod design incorporates a special resistor that protects the tank from rust
DESCRIPTION T Y P E
H E
TALL
T A L L
S H O R T
GAL. CAP.
40 50 29 40 40 38 50 50 50 30 40 40 50
MODEL NUMBER
42VR40-40F 42VR50-40F 22V30F 22V40-36F1 22V40F1 42V40F 22V50F1 42V50-40F 42V50-50F 22V30S-30F 22V40SF 42V40SF 42V50SF
FEATURES GAS INPUT IN THOUS. BTU/HR. NAT. LP
RECOVERY IN G.P.H. 90° RISE NAT. LP
40 40 32 36 38 40 38 40 50 30 36 40 40
40.4 40.4 32.3 36.4 38.4 40.4 38.4 40.4 50.5 30.3 36.4 40.4 40.4
34 36 30 – – 34 – 36 – – 34 36 36
34.3 36.4 30.3 – – 34.3 – 36.4 – – 34.3 36.4 36.4
High Altitude Compliant • All models are certified for applications up to 6,000 feet above sea level. Some models are certified up to 10,200 feet above sea level. Check factory for listing Plus… • Brass drain valve and temperature and pressure relief valve are included • Meets or exceeds National Appliance Energy Conservation Act (NAECA) requirements H E
HIGH EFFICIENCY MODELS FEATURE: • High performance and lower operating cost • Compliant with many gas utility incentive programs * See Residential Warranty Information Brochure for complete warranty information. ®
Energy Factor and Average Annual Operating Costs based on D.O.E. (Department of Energy) test procedures. D.O.E. national average fuel rate natural gas 91¢/therm; LP $1.23/gallon.
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
ENERGY INFO.
FIRST HOUR DEL. G.P.H. NAT.
HT. TO VENT
TANK HT.
DIAM.
HT. TO GAS CONN.
VENT SIZE
WATER CONN. CNTR.
HT. TO SIDE T&P
WATER CONN.
SHIP. WT. (LBS)
ENERGY FACTOR NAT.
AVG. ANN. OPER. COST NAT.
68 83 50 67 73 68 90 83 83 50 72 72 84
63-1/4 62-1/4 59-3/4 61-1/2 61-3/4 61-1/2 61-1/2 61-1/2 62 49-3/4 52-3/4 53-7/8 54-1/4
59-3/4 58-3/4 56-3/8 58 58-3/8 57-3/4 58-1/4 58 58 46-1/4 49-3/8 50-1/2 49-3/4
21 23 16-1/8 17-3/4 18-1/8 19-3/4 20-1/8 21-3/4 21-3/4 19-3/4 20-1/8 20-1/8 22-1/4
14-1/2 14-1/2 14-1/2 14-1/2 14-1/2 14-1/2 14-1/2 14-1/2 14-1/2 14-1/2 14-1/2 14-1/2 14-1/2
3 3 3 3 3 3 3 3 4 3 3 3 3
8 8 8 8 8 8 8 8 8 8 8 8 8
53-1/2 52-1/2 50-3/4 53 52-1/4 52-1/4 51-3/8 52-1/2 52-1/2 40-1/4 42-3/4 44 44
3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4
135 165 100 120 120 125 130 150 150 98 130 130 158
0.62 0.62 0.62 0.59 0.59 0.60 0.58 0.58 0.58 0.61 0.59 0.59 0.59
$220 $220 $220 $231 $231 $227 $235 $235 $235 $224 $231 $231 $231
SPECIFY LP GAS WHEN ORDERING. Add “P” suffix to the model number. Example: 42VR40-40PF. • For SCAQMD rule 1121 compliance models (California only), add “SQ” suffix to the model number. Example: 42VR40-40FSQ.
Rheem Guardian System Features… Exclusive Combustion Shut-off System
Flame Arrestor Plate
Maintenance Free
Should a spill incident occur, the Guardian System shuts off the gas supply and the air supply preventing a sustained vapor burn in the combustion chamber.
A specially-designed flame arrestor prevents ignition of vapors outside the combustion chamber.
Superior air filtration prevents the flame arrestor from becoming clogged by lint, dust and oil.
11
Fury Heavy Duty Gas Water Heaters Available in 60, 75 and 100 Gallon Tall Gas Models 6-Year Limited Tank and Parts Warranty* With ProtectionPlus™ the 6-Year Limited Tank Warranty Becomes 10 Years! SEE PAGE 44.
Get
4 MORE YEARS with ProtectionPlus™
• Designed for high volume applications • High BTU input for fast recovery • Extra durable brass drain valve • Heat saving flue baffle design • Temperature and pressure relief valve
T A L L
GAL. CAP.
Energy Conservation Act (NAECA) requirements
* See Residential Warranty Information Brochure for complete warranty information.
included • Extra durable high temperature dip tube to meet the most stringent plumbing codes
DESCRIPTION T Y P E
• Meets or exceeds National Appliance
MODEL NUMBER
FEATURES GAS INPUT IN THOUS. BTU/HR. NAT. LP
RECOVERY IN G.P.H. 90° RISE NAT. LP
®
Energy Factor and Average Annual Operating Costs based on D.O.E. (Department of Energy) test procedures. D.O.E. national average fuel rate natural gas 91¢/therm; LP $1.23/gallon.
ROUGHING IN DIMENSIONS (SHOWN IN INCHES) FIRST HOUR DEL. G.P.H. NAT. LP
HT. TO VENT
TANK HT.
56
DIAM.
HT. TO GAS CONN.
VENT SIZE
ENERGY INFO.
WATER CONN. CNTR.
HT. TO SIDE T&P
WATER CONN.
SHIP. WT. (LBS)
ENERGY FACTOR NAT.
AVG. ANN. OPER. COSTS NAT.
60
42V60-50NT*
50
50
50.5
50.5
107
107
60
23
13-1/4
4
8
48-1/2
3/4
180
0.56
$244
75
22VR75-70N*
70
69
70.7
69.7
109
109
64-1/2 60-1/2
26-1/4
14-3/4
4
11
54-1/2
1
320
0.53
$257
100
21V100
75
69
75.8
69.7
135
135
68
64
26-1/4
14-3/4
4
11
58
1
350
0.48
$284
100
21V100N*
73
–
73.7
–
116
–
68
64
26-1/4
14-3/4
4
11
58
1
350
0.48
$284
* SCAQMD rule 1121 compliance models. • Specify LP gas when ordering. Add “P” suffix to the model number: Example: 21V100P.
13
PowerVent Induced Draft Gas Water Heater with the Guardian System
™
Available in 40 and 50 Gallon Models 6-Year Limited Tank and Parts Warranty* With ProtectionPlus™ the 6-Year Limited Tank Warranty Becomes 10 Years!** SEE PG. 44.
• Self-Cleaning – EverKleen patented system fights sediment build-up • Reduces fuel costs and provides more hot water • Patented magnesium anode rod design
Guardian System™
™
• Air/fuel shut-off system offers double protection • Maintenance free –no filter to clean Flammable Vapor Detection Sensor
incorporates a special resistor that protects the tank from corrosion for longer life • Electronic ignition system • Standard 110 volt electrical connection • Exceeds National Appliance Energy Conservation Act (NAECA) and ASHRAE requirements
• Protective control system that disables the heater
Get
in the presence of flammable vapor accumulation
4 MORE YEARS
Flexible Venting Options
with ProtectionPlus™
• Long venting lengths up to 100 feet • PVC, ABS, or CPVC vent pipe options • Vertical or horizontal termination
* See Residential Warranty Information Brochure for complete warranty information.
Plus…
• New Quiet Blower • Self-Diagnostic System • Environmentally Friendly Low NOx Burner • High Altitude Compliant – Tall models are certified for applications up to 7,700 feet and short models up to 6,000 feet
DESCRIPTION T Y P E
GAL. CAP.
TALL
SHORT
MODEL NUMBER
FEATURES GAS INPUT IN THOUS. BTU/HR. NAT. LP
RECOVERY IN G.P.H. 90° RISE NAT. LP
Energy Factor and Average Annual Operating Costs based on D.O.E. (Department of Energy) test procedures. D.O.E. national average fuel rate natural gas 91¢/therm; LP $1.23/gallon.
®
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
ENERGY INFO.
FIRST HOUR DEL. G.P.H. NAT.
HT. TO TOP OF ASSEMBLY
TANK HT.
DIAM.
HT. TO GAS CONN.
WATER CONN. CNTR.
HT. TO SIDE T&P VALVE
WATER CONN. SIZE
SHIP. WT. (LBS)
ENERGY FACTOR NAT.
AVG. ANN. OPER. COSTS NAT. GAS
40
42VP40F
40
40
40.4
40.4
68
69-1/4
59
19-3/4
14
8
53-1/2
3/4
140
0.64
$213
50
42VP50F
42
42
42.4
42.4
87
68-1/4
58
21-3/4
14
8
52-1/2
3/4
170
0.64
$213
40
42VP40SF
36
34
36.4
34.3
71
61-1/2
50-1/2
20-1/4
14
8
44
3/4
152
0.64
$213
50
42VP50SF
36
34
36.4
34.3
85
61-1/2
50-1/2
22-1/4
14
8
44
3/4
176
0.62
$220
• Specify LP gas when ordering. Add “PF” suffix to the model number. Example 42VP40PF.
VENTING INFORMATION FOR 2" VENTS NUMBER OF 90° ELBOWS WITH VENT TERMINAL
VENTING INFORMATION FOR 3" VENTS
NUMBER OF 45° ELBOWS
MINIMUM PIPE LENGTH REQ. (FT.)
MAXIMUM PIPE LENGTH (FT.)
NUMBER OF 90° ELBOWS WITH VENT TERMINAL
NUMBER OF 45° ELBOWS
MINIMUM PIPE LENGTH REQ. (FT.)
MAXIMUM PIPE LENGTH (FT.)
One (1)
None
4.0
44.0
One (1)
One (1)
4.0
41.0
One (1)
None
5.0
95.0
One (1)
One (1)
5.0
Two (2)
None
4.0
92.5
38.0
Two (2)
None
5.0
Two (2)
One (1)
90.0
4.0
35.0
Two (2)
One (1)
5.0
Three (3)
None
87.5
4.0
32.0
Three (3)
None
5.0
85.0
Three (3)
One (1)
5.0
82.5
Four (4)
None
5.0
80.0
Four (4)
One (1)
5.0
77.5
Five (5)
None
5.0
75.0
For the 2" vent, one 90° elbow is approximately equal to 6 feet of pipe. One 45° elbow is approximately equal to 3 feet of pipe.
For the 3" vent, one 90° elbow is approximately equal to 5 feet of pipe. One 45° elbow is approximately equal to 2.5 feet of pipe.
15
PowerVent High Efficiency, Induced Draft Gas Water Heater Available in 75 Gallon Model 6-Year Limited Tank and Parts Warranty*
• Flexible venting options available
in PVC, ABC and CPVC, see chart below • Rated for installations up to 7,700 feet • Electronic ignition system • Allows vertical or horizontal termination • NEW! Quiet blower operation • Heat traps included • T&P valve provided • Brass drain valve • Natural gas models meet low NOx requirements
DESCRIPTION T Y P E
GAL. CAP.
TALL
75
FEATURES GAS INPUT IN THOUS. BTU/HR. NAT. LP
MODEL NUMBER
22VRP75
75
75
connection • Exceeds National Appliance Energy Conservation Act (NAECA) and ASHRAE requirements Integrated self-diagnostic system control, thermostat and gas valve * See Residential Warranty Information Brochure for complete warranty information. Energy Factor and Average Annual Operating Costs based on D.O.E. (Department of Energy) test procedures. D.O.E. national average fuel rate natural gas 91¢/therm; LP $1.23/gallon.
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
RECOVERY IN G.P.H. 90° RISE NAT. LP
FIRST HOUR DEL. G.P.H. NAT. LP
75.8
130
75.8
• Standard 110 volt electrical
130
®
ENERGY INFORMATION
HT. TO TOP OF ASSEMBLY
TANK HT.
DIAM.
HT. TO GAS CONN.
WATER CONN. CNTR.
HT. TO SIDE T&P VALVE
WATER CONN. SIZE
SHIP. WT. (LBS)
ENERGY FACTOR NAT.
AVG. ANN. OPER. COSTS NAT.
69-1/2
60-1/2
26-1/4
14-3/4
11
54-1/2
1
325
0.53
$257
• Specify LP gas when ordering. Add “P” suffix to the model number; Example 22VRP75-P.
75 GALLON MODEL MAXIMUM AND MINIMUM VENT LENGTHS SEA LEVEL (0-2,000 FT.): 3" VENT*
NUMBER OF 90° ELBOWS WITH VENT TERMINAL
NUMBER OF 45° ELBOWS
MINIMUM PIPE LENGTH REQ. (FT.)
HIGH ALTITUDE (2,000-7,700 FT.): 3" VENT*
MAXIMUM PIPE LENGTH (FT.)
NUMBER OF 90° ELBOWS WITH VENT TERMINAL
NUMBER OF 45° ELBOWS
MINIMUM PIPE LENGTH REQ. (FT.)
SEA LEVEL TO HIGH ALTITUDE (0-7,700 FT.): 4" VENT*
MAXIMUM PIPE LENGTH (FT.)
NUMBER OF 90° ELBOWS WITH VENT TERMINAL
NUMBER OF 45° ELBOWS
MINIMUM PIPE LENGTH REQ. (FT.)
MAXIMUM PIPE LENGTH (FT.)
One (1)
None
–
40.00
One (1)
None
–
35.00
One (1)
None
–
55.00
One (1)
One (1)
5.00
37.50
One (1)
One (1)
5.00
32.50
One (1)
One (1)
5.00
52.50
Two (2)
None
–
35.00
Two (2)
None
–
30.00
Two (2)
None
–
50.00
Two (2)
One (1)
–
32.50
Two (2)
One (1)
–
27.50
Two (2)
One (1)
–
47.50
Three (3)
None
–
30.00
Three (3)
None
–
25.00
Three (3)
None
–
45.00
Three (3)
One (1)
–
22.50
Three (3)
One (1)
–
42.50
* For the 3" and 4" vent, one 90° elbow is approximately equal to 5 feet of pipe. One 45° elbow is approximately equal to 2.5 feet of pipe.
17
Fury DV Rheemglas
®
Energy Miser® Direct Vent Gas Water Heater
NEW LONGER VENTING** Available in 40 and 50 Gallon Models 6-Year Limited Tank and Parts Warranty* With ProtectionPlus™ the 6-Year Limited Tank Warranty Becomes 10 Years! SEE PG. 44.
• Adjustable coaxial vent allows flexibility Get
4 MORE YEARS with ProtectionPlus™
DESCRIPTION T Y P E
TALL SHORT
• Anode rod equalizes aggressive water action • Relief valve opening – side connect for fast economical installation • Durable plastic formula dip tube • Meets or exceeds National Appliance
of installation – uses outside air for combustion and requires no electrical power • Aluminum vent and cap base to prevent staining of building exterior • Heat saving flue baffle design • Brass drain valve • Temperature and pressure relief valve included • Exclusive Rheemglas® tank lining resists corrosion and prolongs tank life • Gas control and combination thermostat
FEATURES
GAL. CAP.
MODEL NUMBER
GAS INPUT IN THOUS. BTU/HR. NAT.
50 50 40
22DV50-40N* 22DV50-38 22DV40S-36N*
40 38 36
Energy Conservation Act (NAECA) requirements
* See Residential Warranty Information Brochure for complete warranty information. Energy Factor and Average Annual Operating Costs based on D.O.E. (Department of Energy) test procedures. D.O.E. national average fuel rate natural gas 91¢/therm; LP $1.23/gallon.
®
DIMENSIONS
RECOVERY IN G.P.H. 90° RISE NAT.
FIRST HOUR DEL. G.P.H. NAT.
HT. TO VENT A
TANK HT. B
40.4 38.4 36.4
85 85 65
68 72-107† 63-98†
57-1/4 57-1/4 48-1/4
ENERGY INFO.
DIAMETER C
HT. TO GAS CONN. D
VENT SIZE E
HT. TO SIDE T&P F
SHIP. WT. (LBS)
ENERGY FACTOR NAT.
AVG. ANN. OPER. COSTS NAT.
21-3/4 21-3/4 21-3/4
14-1/4 14-1/4 14-1/4
5 6 6
51-1/4 51-1/4 43
164 164 152
0.58 0.58 0.59
$235 $235 $231
* For SCAQMD rule 1121 compliance. † With vertical Vent Kit #SP20061. Venting dimensions are approximate. • If side wall is combustible material, 1" clearance must be included in adjustment range. NOTE: Maximum adjustment range for vent system is 10" for 22DV50-40N; 40" for 22DV40S-36N and 22DV50-38. Review installation manual before installation.
UPPER INLET BOX ASSEMBLY
COLD WATER CONNECTION
HOT WATER CONNECTION
VENTING – ROUGHING IN DIMENSIONS (INCHES) TYPE
TALL TALL SHORT
MODEL NUMBER
22DV50-40N 22DV50-38 22DV40S-36N
4 FEET VENTING AVAILABLE
N/A Horizontal & Vertical
SIDE VENTING (G) MIN.
MAX.
8-1/8 8-1/8 8-1/8
18-1/8 48 48
REAR VENTING (H) MIN.
3-1/8 3-1/8 3-1/8
MAX.
OPTIONAL HEIGHT (A) WITH VENT KIT #SP20061
13-1/8 43 43
E G
N/A 72-107† 63-98†
RANGE OF ADJUSTMENT)
3/4" N.P.T. RELIEF VALVE OPENING
Up to 4 feet above the water heater and 4 feet from an outside wall with 22DV50-38 and 22DV40S-36N. Water heater equipped for venting up to 4 feet horiz. Optional venting up to 4 feet vertical – order kit #SP20061.
Rheem Exclusive Adjustable Coaxial Vent Allows Flexibility of Installation… You may orient the Fury DV for easiest service access, because the adjustable coaxial vent can swivel 360 degrees.
H (H: REAR VENTING
C
**NEW LONGER VENTING!
10"
(G: SIDE VENTING
A B
RANGE OF ADJUSTMENT)
24-3/4"
F 1/2"
D 2"
EXTERIOR WALL
19
Warrior Gas Water Heater Specifically Designed for Manufactured Housing Available in 30 and 40 Gallon Models 5-Year Limited Tank Warranty* 1-Year Limited Parts Warranty*
• Optional air inlet and leg enclosure allows
outside air to be supplied to the water heater without exposing the home to cold air • Two hole top for anode rod and hot water outlet • Factory installed temperature and pressure relief valve – side location • Exclusive Rheemglas® tank lining resists corrosion and prolongs tank life • Anode rod equalizes aggressive water action • Piezo ignitor – easy light pilot • Field convertable controls for natural gas or LP operation
DESCRIPTION T Y P E
TALL
GAL. CAP.
30 40
FEATURES
MODEL NUMBER
21VR30T 21VR40T
• Meets or exceeds National Appliance
Energy Conservation Act (NAECA) requirements • Anode rod equalizes aggressive water action • Cold water inlet – side connection allows for quick, economical hook-up * See Residential Warranty Information Brochure for complete warranty information.
®
Energy Factor and Average Annual Operating Costs based on D.O.E. (Department of Energy) test procedures. D.O.E. national average fuel rate natural gas 91¢/therm; LP $1.23/gallon.
DIMENSIONS
GAS INPUT IN THOUS. BTU/HR. NAT.
RECOVERY IN G.P.H. 90° RISE NAT.
FIRST HOUR DEL. G.P.H. NAT.
34 34
34.3 34.3
49 64
DIAM. (IN.)
17-3/4 19-3/4
The Warrior is CSA certified for manufactured home use, meets ANSI Standards for modular home construction and complies with HUD safety and construction standards.
PART NUMBERS 30 Gallon
40 Gallon
Air Inlet
AP11596
AP11596
Leg Enclosure
AE24609C
AE24609D
ENERGY INFO.
HT. TO VENT (IN.)
TANK HT. (IN.)
VENT SIZE
WATER CONN. CNTR.
60-1/4 60-3/4
57 57-1/2
3 3
8 8
HT. TO SIDE T&P
SHIP. WT. (LBS)
51-1/2 110 51-1/2 125
ENERGY FACTOR NAT.
0.61 0.59
AVG. ANN. OPER. COSTS NAT.
$224 $231
Draft Diverter New improved design provides efficient heating with down-draft protection. Optional Air Inlet and Leg Enclosure Galvanized wrap-around leg enclosure and metal tabular air inlet are affixed to the base. Inlet is equipped with a 1/2" screen for protection against rodents.
21
Warrior DV The Direct Vent Gas Water Heater for Manufactured Housing Available in 30, 40 and 50 Gallon Models 5-Year Limited Tank Warranty* 1-Year Limited Parts Warranty*
* See Residential Warranty Information Brochure for complete warranty information.
®
DENT LAB EN OR EP
UL
TE
®
ST
I
N
DESCRIPTION T Y P E
T A L L
GAL. CAP.
MODEL NUMBER
FEATURES
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
GAS INPUT IN THOUS. BTU/HR. NAT/ LP
RECOVERY IN G.P.H. 90° RISE NAT./LP
FIRST HOUR DEL. G.P.H. NAT./ LP
HT. TO VENT
TANK HT.
57
DIAM.
HT. TO GAS CONN.
ROOF VENT JACK SIZE VENT SZ.
G
FO
R P U B LI C
TY
Energy Factor and Average Annual Operating Costs based on D.O.E. (Department of Energy) test procedures. D.O.E. national average fuel rate natural gas 91¢/therm; LP $1.23¢/gallon.
Y OR AT
Energy Conservation Act (NAECA) requirements
for fast, economical hook-up
FE
®
• Piezo ignitor – easy light pilot • Certified for manufactured (HUD) and modular construction • Anode rod equalizes aggressive water action • Cold water inlet – side connection allows
AN IN D
• No external vented door is required • All combustion air comes from outside the home • Provides maximum design freedom since it can be placed anywhere within the home • Hot water outlet located at top • Factory installed temperature and pressure relief valve – side location. • Exclusive Rheemglas tank lining resists corrosion and prolongs tank life • Field convertable controls for natural gas or LP operation • Meets or exceeds National Appliance
SA
ENERGY INFORMATION
HT. TO SIDE T&P
WATER CONN.
SHIP. WT. (LBS)
ENERGY FACTOR NAT./LP
AVG. ANN. OPER. COSTS NAT. LP
30
21VR30DV
30
30.3
51
57
17-3/4
14-1/2
3
5
51-1/2
20
110
0.61
$224
40
21VR40DV
30
30.3
60
57-1/2 57-1/2
19-3/4
14-1/2
3
5
51-1/2
20
125
0.59
$231
$342
50
21VR50DV
32
32.3
67
57
21-3/4
14-1/2
3
5
51-1/2
20
150
0.58
$235
$348
57
THE WARRIOR DV IS U.L. CERTIFIED FOR MANUFACTURED HOME USE, MEETS ANSI STANDARDS FOR MODULAR HOME CONSTRUCTION, AND COMPLIES WITH HUD SAFETY AND CONSTRUCTION STANDARDS.
ROOF JACKS 12" Non Adjustable & Air Inlet 15-32" Adjustable & Air Inlet 30-60" Adjustable & Air Inlet 48-95" Adjustable & Air Inlet
AP12032E AP12032B AP12032C AP12032D
AIR INLETS 6" Non Adjustable 11-22" Adjustable
AP12019B AP12017B
EXTENSION PIPE KIT Roof Jack Extension Pipe Kit
AP12021
• Roof jack and air inlet must be ordered separately with 30, 40 and 50 gallon direct vent models and must be in accordance with instructions furnished with the heater. No other roof jack or air inlet assemblies are approved for installation with this heater. Clamps and secure strapping are packed in water heater carton.
$331
Adjustable Roof Jack Vent New design allows adjustment to roof pitches of up to 5/12". Four roof jacks available to accommodate roof thickness of 12" up to 95". Direct Combustion Air Inlet Air is drawn directly into combustion chamber through air inlet fixed to base; 1/2" screen for rodent protection. 23
Warrior DVX The Vertical Co-Axial Direct Vent Gas Water Heater for Manufactured Housing Available in 40 and 50 Gallon Models 5-Year Limited Tank Warranty* 1-Year Limited Parts Warranty*
• Installed side mounted T&P valve • No external vented door required • Can be placed anywhere in the home • Field convertible controls for natural gas
• Certified for manufactured (HUD) and modular construction
* See Residential Warranty Information Brochure for complete warranty information.
DIAM.
TANK HEIGHT
VENT SIZE
A
B
C
AN IN D
FO
R P U B LI C
FE
G
TY
®
N
I
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
UL
ST
FEATURES
DENT LAB EN OR EP
TE
DESCRIPTION
®
Energy Factor and Average Annual Operating Costs based on D.O.E. (Department of Energy) test procedures. D.O.E. national average fuel rate natural gas 91¢/therm; LP $1.23¢/gallon.
Y OR AT
or LP operation • 3/4" top connections for hot and cold • Meets or exceeds National Appliance Energy Conservation Act (NAECA) requirements Venting system eliminates the need to • cut a hole in the floor • Piezo ignitor – easy light pilot
SA
ENERGY INFORMATION
T Y P E
GAL. CAP.
TALL
50
22V50DVX
38
38.4
67
21-3/4
57
5
3/4
164
0.58
$235
$348
SHORT
40
22V40SDVX
36
36.4
62
21-3/4
48-1/4
5
3/4
152
0.59
$231
$342
MODEL NUMBER
GAS INPUT IN THOUS. BTU/HR. NAT/ LP
RECOVERY IN G.P.H. 90° RISE NAT./LP
FIRST HOUR DEL. G.P.H. NAT./ LP
THE WARRIOR DVX IS ANSI AND U.L. CERTIFIED FOR USE IN MODULAR HOME CONSTRUCTION AND MANUFACTURED HOME USE. THIS UNIT COMPLIES WITH HUD SAFETY AND CONSTRUCTION STANDARDS.
29-1/4" HOT WATER CONNECTION
SHIP. WT. (LBS)
ENERGY FACTOR NAT./LP
AVG. ANN. OPER. COSTS NAT. LP
C
ROOF JACK VERTICAL VENT KITS 24-37" Adjustable 33-68" Adjustable 45-97" Adjustable 55-132" Adjustable 65-164" Adjustable
UPPER INLET BOX ASSEMBLY
WATER CONNECTION
SEE CHART FOR ROOF JACKS
AP13335A AP13335B AP13335C AP13335D AP13335E
Roof Jacks must be ordered separately with this direct vent water heater and installed in accordance with the instructions furnished with the heater. No other roof jack or vertical vent kit is approved for installation with this heater.
A B
COLD WATER CONNECTION
25
Professional™ Sold and Installed Only by Plumbing Professionals Available in 30, 40, 50, 65 and 80 Gallon Electric Models 8-Year* Limited Tank and Parts Warranty with a Professional Installation. With ProtectionPlus™ the 8-Year Limited Tank Warranty Becomes 12 Years! SEE PAGE 44.
Get
• Brass drain valve • Stainless steel lower heating element • EverKleen™ self cleaning device • Premium grade anode rod • Temperature and pressure relief valve included • Exclusive Rheemglas tank lining resists
UL
Y OR AT
• • • •
DIMENSIONS
DENT LAB EN OR EP
FO
R P U B LI C
FE
G
TY
®
N
I
S H O R T
RHE PRO40-2 RHEH PRO40-2 RHE PRO52-2 RHE PRO66-2 RHE PRO80-2 RHEM PRO30-2 RHEM PRO52-2 RHES PRO30-2 RHES PRO40-2 RHES PRO50-2
®
Energy Factor and Average Annual Operating Costs based on D.O.E. (Department of Energy) test procedures. D.O.E. national average fuel rate electricity 8.6¢/KWH.
ST
MED.
40 40 50 65 80 30 50 30 38 47
MODEL NUMBER
FEATURES
* See Residential Warranty Information Brochure for complete warranty information.
TE
corrosion and prolongs tank life • Isolated tank design reduces conductive heat loss • Electric junction box located above heating elements for easy installation • Over-temperature protector cuts off power in excess temperature situations • Automatic thermostat keeps water at desired temperature
DESCRIPTION
T A L L
Conservation Act (NAECA) and C.E.C. requirements
AN IN D
with ProtectionPlus™
GAL. CAP.
programs
• Meets or exceeds National Appliance Energy
®
4 MORE YEARS
T Y P E
• Compliant with many electric utility incentive
SA
ENERGY INFORMATION
FIRST HOUR RATING G.P.H.
RECOVERY IN G.P.H. @ 90° RISE
HEIGHT (IN)
HEIGHT TO WATER CONN.
DIAMETER (IN.)
APPROX. SHIP WT. (LBS.)
56 57 67 71 88 44 62 42 46 55
21 21 21 21 21 21 21 21 21 21
46-3/4 59-1/4 57 58-3/4 59 36 46 30 31-1/2 32
46-3/4 59-1/4 57 58-3/4 59 36 46 30 31-1/2 32
22-1/4 17-3/4 22-1/4 23 24-1/2 19-3/4 24-1/4 22-1/4 23 26-1/4
104 96 123 160 181 80 128 83 108 149
ENERGY FACTOR
0.94 0.92 0.94 0.92 0.92 0.93 0.93 0.93 0.92 0.91
AVERAGE ANNUAL OPER. COST
$402 $411 $402 $411 $411 $406 $406 $406 $411 $415
Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 4500 watt upper and lower heating elements. If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested. Special Wiring Options – A limited number of special wiring options are available. Consult factory for price and availability. All models equipped with heat traps.
Recovery = wattage/2.42 x temp. rise °F. 4500W = 21 GPH Example: 2.42 x 90°
27
Marathon™ …Shaping The Future Available in 40, 50, 85 and 105 Gallon Electric Models Lifetime Limited Tank Warranty* 6-Year Limited Parts Warranty*
MR40245 MR50245 MR85245 MR105245 MSR50245
FIRST HOUR RATING G.P.H.
HEIGHT (IN)
HEIGHT TO WATER CONN.
52 61 91 104 54
21 21 21 21 21
61-1/2 62-3/4 66-1/4 66-3/4 47-1/4
62-1/2 63-3/4 67-1/4 67-3/4 48-1/4
• 240 volt AC single phase standard • For height to top of T&P and heat traps add 3-1/2" to the height to water connection. Maximum test pressure: 300 PSI Maximum working pressure: 150PSI Recovery = wattage/2.42 x temp. rise °F. 4500W = 21 GPH Example: 2.42 x 90°
DIMENSIONS RECOVERY IN G.P.H. @ 90° RISE
DENT LAB EN OR EP
UL
Y OR AT
40 50 85 105 SHORT 50 T A L L
MODEL NUMBER
®
G
FO
R P U B LI C
TY
®
N
FE
Energy Factor and Average Annual Operating Costs based on D.O.E. (Department of Energy) test procedures. D.O.E. national average fuel rate electricity 8.6¢/KWH.
I
GAL. CAP.
FEATURES
* See Residential Warranty Information Brochure for complete warranty information.
ST
DESCRIPTION T Y P E
protection against “dry-firing” – stainless steel incoloy lower element for resistance to lime build-up • Factory installed conduit between element control boxes • All plastic tank eliminates the need for an anode rod • Factory installed temperature and pressure relief valve • Factory installed vacuum relief valve
AN IN D
™
• Thermally fused upper element provides
TE
• Seamless, blow-molded, polybutylene tank – impervious to rust and corrosion • Multiple layers of filament wound fiberglass give the tank unmatched strength • Polyurethane Envirofoam insulation helps reduce energy consumption • The highest energy factors (EF) available! • Pipe wrap energy saving kit included to achieve maximum energy savings • Recessed drain valve is out of the way of brooms and scrubbers • Tough molded polyethylene outer shell resists dents and scratches • Bowl shaped bottom allows complete sediment draining • High temperature polysulfone dip tubes
SA
ENERGY INFORMATION DIAMETER (IN.)
APPROX. SHIP WT. (LBS.)
ENERGY FACTOR
21-3/4 23-1/2 28-1/4 30-1/4 28-1/4
91 103 139 152 101
0.94 0.94 0.92 0.91 0.94
AVERAGE ANNUAL OPER. COST
$402 $402 $411 $415 $402
Your Marathon is warranted not to leak for as long as you own your home*… The Marathon offers this no-leak promise because of its superior, non-metallic PermaGuard tank construction…A seamless blow molded polybutylene inner tank with a filament wound fiberglass outer tank for maximum strength. Superior performance, highefficiency and low operating cost…for a lifetime*! * See Residential Warranty Information Brochure at your dealer for complete warranty information.
29
Fury Rheemglas
®
Energy Miser® Electric Water Heater
Available in 30, 40, 50, 65, 80 and 120 Gallon Tall – 30 and 50 Gallon Medium – 20, 30, 38 and 47 Gallon Short Models 6-Year Limited Tank and Parts Warranty* With ProtectionPlus™ the 6-Year Limited Tank Warranty Becomes 10 Years! SEE PAGE 44.
• EverKleen™ self cleaning device • Brass drain valve • Temperature and pressure relief valve included • Isolated tank design reduces conductive heat loss Get efficiency resistored heating elements 4 MORE YEARS • High • Anode rod equalizes aggressive water action with ProtectionPlus • Electric junction box located above heating
H E
HIGH EFFICIENCY MODELS FEATURE: • High performance and lower operating cost • Compliant with many electric utility incentive programs
™
elements for easy installation
* See Residential Warranty Information Brochure for complete warranty information.
• Over-temperature protector cuts off power in excess temperature situations
• Automatic thermostat keeps water at desired
• • • • •
83VR40-2 83VR52-2 83VR66-2 83VR80-2 83MVR52-2 82V30-2 82V40-2 82VH40-2 82V52-2 82V66-2 82V80-2 82V120-2 82MV30-2 82MV52-2 82SV20-2 82SV30-2 82SV40-2 82SV50-2
FIRST HOUR RATING G.P.H.
56 67 71 88 62 48 53 57 58 71 88 99 44 62 – 42 45 55
21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21
TANK HEIGHT
46-3/4 57 58-3/4 59 46 45-3/4 46-1/2 59-1/4 57 58-1/2 59 62-1/2 36 46 31-1/2 30 31-1/2 32
HEIGHT TO WATER CONN.
46-3/4 57 58-3/4 59 46 45-3/4 46-1/2 59-1/4 57 58-1/2 59 62-1/2 36 46 31-1/2 30 31-1/2 32
DIAMETER
22-1/4 22-1/4 23 24-1/2 24-1/4 17-3/4 19-3/4 17-3/4 19 21 23 28-1/4 19-3/4 21-3/4 17 22-1/4 23 26-1/4
APPROX. SHIP WT. (LBS.)
104 123 160 181 128 80 95 96 107 150 177 324 80 117 62 83 108 149
AN IN D
Y OR AT
40 50 65 80 MED. 50 30 40 T 40 A 50 L L 65 80 120 30 MED. 50 20 S H 30 O 38 R T 47 T A L L
MODEL NUMBER
ROUGHING IN DIMENSIONS (SHOWN IN INCHES) RECOVERY IN G.P.H. @ 90° RISE
UL FO
R P U B LI C
FE
G
TY
®
N
I
H E
GAL. CAP.
FEATURES
DENT LAB EN OR EP
ST
DESCRIPTION T Y P E
®
Energy Factor and Average Annual Operating Costs based on D.O.E. (Department of Energy) test procedures. D.O.E. national average fuel rate electricity 8.6¢/KWH.
TE
temperature • Meets or exceeds requirements of the National Appliance Energy Conservation Act (NAECA)
SA
ENERGY INFORMATION ENERGY FACTOR
0.94 0.94 0.92 0.92 0.93 0.93 0.92 0.92 0.91 0.89 0.86 0.85 0.93 0.90 N/A 0.93 0.92 0.91
AVERAGE ANNUAL OPER. COST
$402 $402 $411 $411 $406 $406 $411 $411 $415 $425 $439 $444 $406 $420 N/A $406 $411 $415
Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 4500 watt upper and lower heating elements. If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested. Recovery = wattage/2.42 x temp. rise °F. Single element models available on special order (6000W max.). Substitute “-1” for “-2” in model number. 4500W = 21 GPH Example: Special Wiring Options – A limited number of special wiring options are available. Consult factory for price and availability. 2.42 x 90° All models equipped with heat traps.
31
Warrior Rheemglas
®
Electric Water Heater for Manufactured Housing
Available in 20, 30, 40 and 50 Gallon Side Connect Models 5-Year Limited Tank Warranty* 1-Year Limited Parts Warranty*
• Lifeguard stainless steel element** • Meets H.U.D. Safety and Construction Standards, ASHRAE 90A-80 and • Isolated tank design reduces heat loss National Appliance Energy Conservation • High efficiency heating elements Act (NAECA) requirements • Exclusive Rheemglas tank lining resists corrosion and prolongs tank life Design evaluated in accordance with Part 3280.707(d)(1) (2) of HUD Mobile Home Construction and Safety • Anode rod equalizes aggressive water action orStandards for Energy Efficiency. • Automatic temperature control thermostat * See Residential Warranty Information Brochure for complete • Over-temperature protector automatically warranty information. ™
®
TANK HEIGHT
HEIGHT TO WATER CONN.
DIAMETER
APPROX. SHIP WT. (LBS.)
AN IN D
UL
Y OR AT
MODEL NUMBER
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
RECOVERY IN G.P.H. @ 90° RISE 3500 WATTS 4500 WATTS
DENT LAB EN OR EP
FO
R P U B LI C
FE
G
TY
®
N
I
GAL. CAP.
FEATURES FIRST HOUR RATING G.P.H. 3500 WATTS 4500 WATTS
®
Energy Factor and Average Annual Operating Costs based on D.O.E. (Department of Energy) test procedures. D.O.E. national average fuel rate electricity 8.6¢/KWH.
ST
DESCRIPTION T Y P E
** Double element models upper element only.
TE
cuts off power in excess temperature situations • Electrical junction box (for 1/2" and 3/4" conduit) placed above heating elements for easy installation
SA
ENERGY INFORMATION ENERGY FACTOR
AVERAGE ANNUAL OPER. COST
SIDE CONNECT T A L L
20 30 40 50
72V20-1 72V30-2 72V40-2 72V52-2
– 41 47 51
– 46 51 56
– 16 16 16
– 21 21 21
31-1/2 45-1/2 46-3/4 57
25-1/2 39-3/4 40-1/4 50-3/4
17-3/4 17-3/4 19-3/4 19-3/4
62 70 94 108
N/A 0.93 0.92 0.91
N/A $406 $411 $415
• If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested. • Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 3500 watt or 4500 watt heating elements. 71-20 furnished with standard 120 volt AC, single phase, 2000 watt heating element. • Special Wiring Options – A limited number of special wiring options are available. Consult factory for price and availability. • For single element, substitute “-1” suffix for “-2”. Recovery = wattage/2.42 x temp. rise °F. 4500W = 21 GPH Example: 2.42 x 90°
33
Marathon™ Point-of-Use…With The All Plastic Tank That Can’t Corrode Available in 15 and 20 Gallon Electric Models Residential Use: Lifetime Limited Tank Warranty, 6-Year Limited Parts Warranty* Light Duty Commercial Use: 10-Year Limited Tank Warranty, 1-Year Limited Parts Warranty*
MR15120 MR20120 MR20230
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
ELEMENT WATTAGE
VOLTAGE
TANK HEIGHT
2000 2000 3000
120 120 240
31-3/4 30-1/2 30-1/2
Marathon Point-of-Use water heaters are built to the same specifications as our fullsize Marathons. These point-of-use water heaters are great for applications where the larger water heaters won’t fit, or for special uses such as: • Apartments and condo’s • Restrooms in offices and commercial buildings • Cabins, camps and recreational property • Lavatories in large homes away from central water heating system
®
HEIGHT TO WATER CONN.
35-3/4 34-1/2 34-1/2
DENT LAB EN OR EP
UL G
FO
R P U B LI C
TY
®
N
FE
* See Residential Warranty Information Brochure for complete warranty information.
Y OR AT
15 20 20
MODEL NUMBER
against “dry-fire”; low watt, density for long life • Factory installed temperature and pressure relief valve • Factory installed vacuum relief valve • Inlet and outlet connections are 3/4" NPT • Water tight grommets keep out overhead moisture and condensation
I
GAL. CAP.
FEATURES
anode rod
• Thermally fused element to protect tank
ST
DESCRIPTION
• All plastic tank eliminates the need for an
TE
tank – impervious to rust and corrosion • Multiple layers of filament wound fiberglass give the tank unmatched strength • Polyurethane Envirofoam™ insulation helps reduce energy consumption • The most energy efficient in its class • Recessed brass drain valve is out of the way of brooms and scrubbers • Tough molded polyethylene outer shell resists dents and scratches • Bowl shaped bottom allows complete sediment draining • High temperature polysulfone dip tubes
AN IN D
• Seamless, blow-molded, polybutylene
SA
ENERGY INFORMATION
TANK DIAMETER
APPROX. SHIP WT. (LBS.)
ENERGY FACTOR
AVERAGE ANNUAL OPER. COST
21-3/4 23-3/4 23-3/4
46 51 51
N/A N/A N/A
N/A N/A N/A
The Marathon Point-of-Use Water Heater Warranty RESIDENTIAL USE
LIFETIME / 6 YEARS* Privately owned, single family dwellings – the tank is warranted not to leak “for as long as you own your home”. If the home is sold, the warranty reverts to fifteen years from the date of the installation and the second owner receives coverage for the time remaining. Parts are warranted for 6 years from the date of manufacture or 5 years from the effective date, whichever is greater. LIGHT DUTY COMMERCIAL USE
10 YEARS /1 YEAR* Apartments, condominiums, restrooms in office and commercial buildings, multifamily housing or any light duty commercial/industrial use – the tank is warranted for 10 years from the date of installation. Parts are warranted for 1 year from the date of manufacture. * See Marathon Point-of-Use Warranty Information Brochure at your dealer for complete warranty information.
35
Point-of-Use Rheemglas
®
Energy Miser® Electric Water Heaters
Available in 2-1/2, 6, 10, 15, 20 and 30 Gallon Models 6-Year Limited Tank and Parts Warranty*
2-1/2 Gallon
2-1/2 gallon model features: • 120 volt model with 3 prong cord set… simply plug it in! 240 volt model includes a junction box for easy installation of 1/2" or 3/4" conduit • Wall bracket for easy wall mount installations • Corrosion resistant 1/4 turn drain valve
• Space-saving design for installation in limited spaces • High efficiency heating element • Temperature and pressure relief valve included • Over-temperature protector cuts off power in excess temperature situations • Automatic thermostat keeps water at desired temperature • Meets or exceeds National Appliance
* See Residential Warranty Information Brochure for complete warranty information.
Energy Conservation Act (NAECA) requirements
14 15-1/4 23 24-1/4 25-1/4 30
HT. TO HOT WATER OUTLET
14 12-1/2 20-1/2 22 22-3/4 23
DIAMETER
HT. TO SIDE T&P
9-3/4 15-3/4 15-3/4 17-3/4 19-3/4 21-3/4
– 11-1/2 19-1/2 21 21-3/4 23
HT. TO COLD WATER INLET
– 4-1/4 4-1/4 4-1/2 5 2-3/4
Y OR AT
81VP2S 81VP6S 81VP10S 81VP15S 81VP20S 82VP30-1*
HEIGHT
FO
R P U B LI C
FE
G
TY
®
N
I
2.5 6 10 15 20 30
MODEL NUMBER
ROUGHING IN DIMENSIONS (SHOWN IN INCHES)
UL
ST
DESCRIPTION
DENT LAB EN OR EP
TE
6, 10, 15, 20 and 30 Gallon
GAL. CAP.
AN IN D
®
Energy Factor and Average Annual Operating Costs based on D.O.E. (Department of Energy) test procedures. D.O.E. national average fuel rate electricity 8.6¢/KWH.
SA
ENERGY INFORMATION APPROX. SHIP WT. (LBS.)
ENERGY FACTOR
22 36 46 54 69 91
N/A N/A N/A N/A N/A 0.93
AVERAGE ANNUAL OPER. COST
N/A N/A N/A N/A N/A $406
* For double element, substitute “-2” suffix for “-1”. Not available in 120 volt. Available with 2-wire (single phase) outlet only. (6000 watt max.). • 2.5 gallon model: 1⁄2" N.P.T. inlet and outlet. Relief valve connection 3⁄4". Available with 120 or 240 volt AC single phase only, 120v (1440w) 240v (1500w) Power cord supplied with 120 volt models only. Optional 14" diameter safety catch pan with 1" side drain outlet available (Part No. AS-21990A-G). • 6 through 30 gallon models: 3⁄4" N.P.T. outlet, inlet, anode rod. T & P valve connections. Not available with 3 phase wiring. Water heaters furnished standard with 120 volt AC, 2000 watt single element. Special wiring options – a limited number of wiring options are available. Consult factory for price and availability. CONSTRUCTION DETAILS: The cold water enters the tank a few inches from the bottom. Both hot and cold water lines may be connected directly to the water heater without special nipples or tees. The relief valve simply screws into the opening provided.
37
Table Top Rheemglas
®
Energy Miser® Electric Water Heaters
Available in 40 Gallon Model 6-Year Limited Tank and Parts Warranty*
88H-40D
DIMENSIONS
FIRST HOUR RATING G.P.H.
RECOVERY IN G.P.H. @ 90° RISE
WIDTH (IN.)
HEIGHT (IN)
45
21
25
36
®
DENT LAB EN OR EP
UL G
FO
R P U B LI C
TY
®
N
FE
Energy Factor and Average Annual Operating Costs based on D.O.E. (Department of Energy) test procedures. D.O.E. national average fuel rate electricity 8.6¢/KWH.
Y OR AT
40
MODEL NUMBER
* See Residential Warranty Information Brochure for complete warranty information.
I
GAL. CAP.
FEATURES
elements are completely immersed all the heat goes into the water • Extra thick fiberglass insulation • Automatic thermostat keeps water at desired temperature • Meets or exceeds National Appliance Energy Conservation Act (NAECA) requirements
ST
DESCRIPTION T Y P E
®
TE
panel permit water heater to fit snugly against wall • Cold water inlet, hot water outlet, relief valve and electrical connections at top of tank for easy access and fast economical installation
• Rheemglas tank lining resists corrosion and prolongs tank life • Direct immersion resistored heating
AN IN D
• Brass drain valve • 36" high top features a four inch high integral back splash • Baked enamel top is acid and heat resistant • High efficiency screw-in type heating elements • Temperature and pressure relief valve included • Recessed base and channel in back
SA
ENERGY INFORMATION
HEIGHT TO WATER CONN.
33
APPROX. SHIP WT. (LBS.)
ENERGY FACTOR
AVERAGE ANNUAL OPER. COST
156
0.88
$429
• Heaters furnished with standard 240 volt AC, single phase non-simultaneous wiring, and 4500 watt upper and lower heating elements. • If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested. • Special Wiring Options – A limited number of special wiring options are available. Consult factory for price and availability. Recovery = wattage/2.42 x temp. rise °F. 4500W = 21 GPH 2.42 x 90°
Example:
39
Solaraide™ Storage Tank and Electric Storage Water Heaters for Solar Applications Available in 80 and 120 Gallon Side Connect and Top Connect Models 6-Year Limited Tank and Parts Warranty*
tank bottom to prevent mixing with heated water • Anode rod equalizes aggressive water action for prolonged tank life • Cold water inlet, hot water outlet, relief valve and anode rod at top of tank for easy access and fast, economical installation • Automatic temperature control • Over temperature protector * See Residential Warranty Information Brochure for complete warranty information. ®
MODEL NUMBER
SIDE CONNECT 80 81VR80-1 T 120 81VR120-1 A L 80 81VR80-T L 120 81VR120-T TOP CONNECT 80 81VR80TC-1 T 120 81VR120TC-1 A L 80 81VR80TC-T L 120 81VR120TC-T • All units furnished standard 240 volt AC. • Units are shipped with a 4500 watt element. If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested. • Solaraide models meet all current requirements for solar storage tanks. • The tanks are Rheemglas lined and are designed to operate up to 150 PSI.
G
FO
R P U B LI C
TY
FE
I
GAL. CAP.
Y OR AT
®
N
DIMENSIONS MAXIMUM WATTAGE UPPER
UL
ST
DESCRIPTION T Y P E
DENT LAB EN OR EP
TE
single element water heater, both specially equipped for installation with residential direct solar systems • Special threaded stud located near the outlet for attachment of tank sensors • Temperature and pressure relief valve included • Collector feed and return fittings located at front of tank for convenient installation • Isolated tank design for better heat retention heating element • High efficiency • Rheemglas® tank lining resists corrosion and prolongs tank life
• Cold water inlet brings cold water to
AN IN D
• Brass drain valve • Choice of two models…storage tank or
SA
ENERGY INFORMATION
HEIGHT (IN)
6000 W 6000 W Storage Only Storage Only
24-1/2 28-1/4 24-1/2 28-1/4
58-3/4 62 58-3/4 62
7 7 7 7
37 37 37 37
192 336 192 336
R-17.3 R-16.7 R-17.3 R-16.7
6000 W 6000 W Storage Only Storage Only
24-1/2 28-1/4 24-1/2 28-1/4
58-3/4 62 58-3/4 62
– – – –
– – – –
192 336 192 336
R-17.3 R-16.7 R-17.3 R-16.7
SIDE CONNECT Raised 7" from the bottom, the outlet to the solar collector panel helps prevent scale and sediment from entering the circulating through the solar system.
HEIGHT TO COLLECTOR RETURN (IN)
APPROX. SHIP WT. (LBS.)
APPROX. RFACTOR
DIAMETER (IN.)
HEIGHT TO COLLECTOR FEED (IN)
TOP CONNECT A special threaded stud is also welded to the tank behind the lower cavity opening. Low voltage sensor wire is run from this point inside the jacket and out the top for easy control connection.
A special threaded stud is also welded to the tank near the outlet for attachment of tank sensors.
41
Solaraide™ HE Solar Heat Exchanger, Solar Tank, or Electric Storage Water Heater Available in 80 Gallon Models 6-Year Limited Tank and Parts Warranty*
bottom to prevent mixing with heated water • Anode rod equalizes aggressive water action for prolonged tank life • Cold water inlet, hot water outlet, relief valve and anode rod at top of tank for easy access and fast, economical installation • Automatic temperature control • Over temperature protector * See Residential Warranty Information Brochure for complete warranty information. ®
DENT LAB EN OR EP
UL
ST
I
DESCRIPTION
TALL
GAL. CAP.
80 80
MODEL NUMBER
81V80HE-1 81V80HE-T
DIMENSIONS MAXIMUM WATTAGE UPPER
6000 W Storage only
DIAMETER (IN.)
HEIGHT (IN)
HEIGHT TO COLLECTOR FEED (IN)
24-1/2 24-1/2
58-3/4 58-3/4
6 6
• Heaters furnished standard 240 volt AC. • Units are shipped with a 4500 watt element. If heating elements of different wattages than those shown are demanded by zone requirements, they must be specifically requested. • To prevent corrosion, proper pH levels in transfer fluid must be maintained. • Solaraide models meet all current state requirements for solar storage tanks. • The tanks are Rheemglas lined and are designed to operate up to 150 PSI.
A special 1/2" NPT opening is provided for installation of a “probe type” thermostat.
G
FO
R P U B LI C
TY
TE
®
N
T Y P E
Y OR AT
AN IN D
single element water heater, both specially equipped for installation with residential direct solar systems • Temperature and pressure relief valve included • Collector feed and return fittings located at front of tank for convenient installation • Isolated tank design for better heat retention heating element • High efficiency • Rheemglas® tank lining resists corrosion and prolongs tank life
• Cold water inlet brings cold water to tank
FE
• Brass drain valve • Choice of two models…storage tank or
SA
ENERGY INFORMATION HEIGHT TO COLLECTOR RETURN (IN)
APPROX. SHIP WT. (LBS.)
30 30
192 192
APPROX. RFACTOR
R-17.3 R-17.3
COPPER COIL DATA (Type L Copper) Maximum pressure = 150 psi Maximum temperature = 185°F. Tube I.D. = 5/8" Solaraide HE Tank Capacity 80 Gallons
Coil Capacity Gallons 2.2
Length of Tubing Around Tank (Ft) 120
PRESSURE DROP THROUGH COIL (Feet of H20) Head Loss (Feet) Flow Rate 80 Gallon 1 GPM 1.3 2 GPM 4.8 3 GPM 10.0
43
ProtectionPlus™ 4 Year Limited Warranty Extension Kit The best water heater warranty in the industry comes in the smallest box! Part Number: SP20079 (Sold only in 6 package quantity) For use on Rheem® Residential Fury, Professional, PowerVent and Direct Vent models*
•
Kit contains: High quality magnesium anode rod with plastic lined nipple (hot side) Plastic lined nipple (cold side) Warranty certificate with installation instructions ProtectionPlus label for heater Provides up to 135% additional anodic protection With just two water heaters, you have the option of Y E A R L I M I T E D TA N K W A R R A N T Y selling four warranty periods BECOMES Effectively have four water heaters in little more space than two Y E A R L I M I T E D ™
• • •
* Not for use on: Warrior, Warrior DV, Marathon, Point-of-Use, or Table Top models.
6 8
TA N K
W A R R A N T Y
BECOMES
10 12 44
Lifeguard™ Electric Element High density nichrome wire electric heating filament; best grade A, 80/20 nichrome wire made…for top performance and long-life operation.
High-grade magnesium oxide packing moves the heat quickly to the element’s surface, protecting the nichrome wire filament and boosting efficiency.
Designed for the future, the LIFEGUARD™ electric water heater element is as close to a lifetime element as space-age technology can produce*. Patented resistor design** helps prolong anode rod and tank life… A Rheem Exclusive! * See Residential Warranty Information Brochure for complete warranty information. ** Registered trade-mark of International Nickel Co.
Steel screw-in head provides solid construction and ease of maintenance. INCOLOY® 840 stainless steel sheath, resists water chemical corrosion and burn-out even in air or sediment for long element life, long life performance.
Low watt density design delivers full watt-rated heating power to a larger surface area, eliminating high heat concentrations and prolonging element life.
45
EverKleen™ • Fights Sediment Build-Up • Helps Preserve Operating Efficiency • Helps Improve Tank Life • Provides Increased Deliverability Sediment build-up in a water heater creates layers of non-conducting material between the water and the energy that heats the water. This causes a reduction of heat transfer which increases tank bottom temperatures and decreases water temperatures. When this occurs, the results are decreased water heater efficiency and decreased tank life. The EverKleen™ system helps to dislodge this sediment by channeling water through a specially developed inlet tube. This tube creates a high-velocity spiraling water stream which strikes the bottom of the water heater tank with sediment “busting” force. The spiraling effect also creates better mixing throughout the water heater tank which reduces the effects of stacking. Stacking occurs when frequent small draws of water create different temperatures throughout the tank resulting in increased peak temperatures at the top of the tank. The EverKleen™ system greatly reduces peak temperatures, thus increases first hour deliverability.
Included at no extra charge on all Rheem Fury and Professional ™ models. 46
Accessories CATCH PAN KIT
WALL MOUNTING KIT
Available in 5 sizes to help protect any installation area from possible water damage. Each 2" deep drain pan is manufactured of aluminum and fitted with a 1" drain outlet. Provides that extra level of “protection assurance” that many homeowners and apartment dwellers are looking for. Available in 18", 20", 22", 24", and 261⁄2 " diameters. Our specially designed, tapered side wall allows for “oneinside-the-other” stacking and minimal storage area. Available with side drain outlet.
For Point-of-Use Electric Water Heaters
This wall mounting kit for point-of-use electric water heater installations provides an easy way to mount the unit off the floor, out of the way for more usable floor space in a small area. It’s been designed for use with 6, 10, 15, and 20 gallon models (AS-36111) and all walls with 16 " stud centers. All necessary parts are included in this easy to install, time-and-money saving kit.
Catch pan must conform to local codes. 47
Therm-X-Guard Thermal Expansion Tanks Eliminates problems associated with thermal expansion in closed loop systems.
B
• 5 year limited tank warranty • Suitable for water heaters up to
B
120 gallon capacity and supply pressure to 80 PSI.
MODELS: RRT-5, RRT-12 Maximum Operating Conditions (Vt) Total Volume Diameter Height Operating Working Model (A) (B) Number* Temperature Pressure (PSIG) (Gallons) RRT-50 RRT-12 RRT-25
200°F (93°C) 150 (10.5 kg/cm2) 200°F (93°C) 150 (10.5 kg/cm2) 200°F (93°C) 150 (10.5 kg/cm2)
2.0 4.4 10.3
08" 11" 153⁄8"
12 5⁄8" 15" 151⁄4"
System Connection
MODEL: RRT-25 Standard Factory Pre-charge
Diaphragm Material
Liner Material
⁄4" NPTM – BRASS 40 PSIG (2.8 kg/cm2) Butyl Rubber Polypropylene 3 ⁄4" NPTM – BRASS 40 PSIG (2.8 kg/cm2) Butyl Rubber Polypropylene 3
1" NPTF – BRASS 40 PSIG (2.8 kg/cm2) Butyl Rubber Polypropylene 48