PNEUMATIC AND HYDRAULIC AUTOMATION PRODUCTS Space Saving Engineered Solutions
LC SERIES
L SERIES PNEUMATIC CYLINDERS
TABLE OF CONTENTS
Features 7 How to Order 9 Engineering Data 10 12mm Bore 11 20mm Bore 15 25mm Bore 19 28.5mm Bore 23 32mm Bore 27 40mm Bore 31 50mm Bore 35 63mm Bore 39 76mm Bore 43 101mm Bore 47 127mm Bore 49 152mm Bore 51
NON-ROTATING LOAD CARRYING CYLINDERS Features 63 How to Order 64 Engineering Data 65 12mm Bore 66 20mm Bore 67 25mm Bore 68 28.5mm Bore 69 32mm Bore 70 40mm Bore 71 50mm Bore 72 63mm Bore 73
NEW
BORE SIZE
ACCESSORIES
SC SERIES
CYLINDERS Solid State Limit Sensors Sensor Low Profile Sensor Receptacle Alignment Couplers Flange Mountings Pivot Mountings Rod End Options Urethane Shock Pads
STOPPER CYLINDERS 54 55 56 57 58 60 61 62
Features 74 How to Order 75 Engineering Data 76 20mm Bore 77 25mm Bore 80 32mm Bore 83 40mm Bore 86 50mm Bore 89 Rod End Styles 92 Flange Mount 93
NEW
NEW
BORE SIZE
L 15 SERIES HYDRAULIC CYLINDERS Features 94 How to Order 95 Engineering Data 96 20mm Bore 97 25mm Bore 99 32mm Bore 101 40mm Bore 103 50mm Bore 105
PRODUCT
L 30 SERIES HYDRAULIC CYLINDERS Features 119 How to Order 120 Engineering Data 121 25mm Bore 122 32mm Bore 123 40mm Bore 124 50mm Bore 125 63mm Bore 126 76mm Bore 127 Rod End Options 128 Rod Extensions 129
NEW
PRODUCT
L 20 SERIES HYDRAULIC CYLINDERS Features 107 How to Order 108 Engineering Data 109 25mm Bore 110 32mm Bore 111 40mm Bore 112 50mm Bore 113 63mm Bore 114 76mm Bore 115 101mm Bore 116 Rod End Options 117 Rod Extensions 118
CUSTOM CYLINDERS Custom Products
130
NEW THINKING for better solutions
For more than 6 decades Nason has provided pneumatic and hydraulic pressure devices to the industrial, military, and mobile hydraulics fields. Over a decade ago, Nason took the knowledge gained from designing and manufacturing custom devices for harsh environments, limited space requirements, and quality, long life products and applied it to our newest product offerings, Pneumatic and Hydraulic Automation Products. We knew it would take the same commitments to quality that make our Pressure, Vacuum, and Temperature devices the standard bearer in the industry: quality people, quality materials, and quality designs. Privately owned and operated, Nason is located on 40 acres in Upstate South Carolina. Nason’s 50,000 square foot manufacturing facility features state of the art CNC manufacturing equipment as well as a fully staffed manual machinery department which allows Nason to react quickly to customer requirements. Nason’s cylinder line is designed around 15 custom extrusions, of which over 6,000 feet is kept in raw stock ensure quick reaction to custom design and delivery requests. All cataloged product is kept in stock, in component form, for quick assembly and delivery. Nason’s Engineering Department is staffed with over 75 years of experience in the Pneumatic and Hydraulic fields. Utilizing the latest 3D CAD software, Nason is fully staffed to meet your most demanding design requirements. 3D models as well as 2D prints of all Nason product lines are available for download from our website. Custom designs can be modeled and delivered quickly for insertion into your assembly models. Contact Nason for your next Automation need. Let us show you why we are the space saving engineered solutions leader.
SMALLER for greater savings Nason cylinders are small for more effective use of space but their compact package delivers the same power as larger competitive products. That means you can downsize without compromising
NASON Cylinders at a Glance
power capacity.
STRONGER for longer life Our cylinders provide significantly more cycles of productive service. We use aluminum or stainless-steel bar stock and we hone the bore until it has a mirror finish. This assures you longer seal and cylinder life, and better performance.
SMARTER for more flexibility Unlike some manufacturers who buy extruded stock with pre-drilled holes, we custom drill our cylinders. That way we can accommodate your design specifications for drilling patterns, hole/contour geometry, ports, and mountings. Plus, smarter means being flexible; small or large quantities, any specification, prototype availabily, and custom products and service. We believe there is a smarter way to assure quality as well. All Nason cylinders are made in America in our own manufacturing plant. No products or components are produced offshore.
Compact design—more power in a smaller package Customized to your specifications Low breakaway and running friction 100% precision-machined design Field rebuildable
Low-friction Nitrile seals, factory lubricated with PTFE impregnated grease
Hardened, double-wound 302 stainless-steel retaining wires
Self-lubricating sintered bronze bearings Smooth exterior (no bolt together or retaining wire hole access)
Low-friction cupseal with integral wiper (on specified models)
Chrome-plated (303, 1045/1050 stainless-steel rods Inch or metric mounting and porting (direct)
Thick-walled, anodized aluminum caps and housings (machined bore)
L SERIES PNEUMATIC CYLINDERS
Compact Size / Clean Design Nason L series cylinders were designed with today’s automation equipment in mind. They offer more power in a smaller package than comparable pancake or compact type cylinders. The smooth exterior of the cylinder body (no bolt together or retaining wire hole access) means no dirt or grease traps.
Rugged Construction The L series incorporates thick walled, anodized aluminum housings and caps. Rods are chrome plated 303 stainless steel riding in self-lubricating bronze bearings and hardened 302 stainless steel retaining wires are used for assembly. Rebuildable All L series cylinders are field rebuildable. Versatile Design The L series cylinders are metric in design (bore and rod sizes). They are offered in inch or metric mounting and porting. Due to their 100% machined design they are easily customized by Nason.
L SERIES
Low Breakaway and Running Friction / Long Life Designed for low start up and running friction, the L series contains low friction Nitrile seals and is lubricated at the factory with PTFE impregnated grease. Precision machined components and self-lubricating bearings ensure long life and continued low friction operation.
Individual Features
Individual Features Double Acting, Single Rod
Type “D” - Double Acting, Double Rod
Type “R” - Single Acting, Spring Extend
Type “S” - Single Acting, Spring Retract
Model LS
• Most compact of 3 models
Double Acting, Single Rod
Model LE
• Extended internal rod bearing for additional load support • Integral seal and rod wiper
Double Acting, Single Rod
Model LH
• Extended internal rod bearing for additional load support • Integral seal and rod wiper • Wear band added to piston for additional load support
8
Type “D” - Double Acting, Double Rod
How to Order
How to Order Example: Part Number: LH-32X50MB-EM-HSRS LH
32
MODEL
BORE
x
MB
50
MOUNTING
STROKE TYPE
MODEL
EM
HS
RS
OPTIONS
MAGNETIC
MOUNTING
LS - Low Friction Standard Duty Cylinder
MF - Threads on Front Face (Rod End)
LE - Low Friction Medium Duty Cylinder
MR - Threads on Rear Face (Opposite Rod)
LH - Low Friction Heavy Duty Cylinder
MB - Threads on Both Faces MT - Drilled Through and Counterbored for Bolt Clearance (See product pages for stroke availability)
BORE 12 - 12mm (.47")
MS - Threads on Side of Cylinder Body FF - Flange on Front Face (Rod End)
20 - 20mm (.79")
FR - Flange on Rear Face (Opposite Rod)
25 - 25mm (.98")
FS - Flange on Side of Cylinder Body
28.5 - 28.5mm (1.13")
PR - Pivot on Rear Face
32 - 32mm (1.26")
PL - Long Pivot
40 - 40mm (1.58") 50 - 50mm (1.97") 63 - 63mm (2.48") 76 - 76mm (3.00") 101 - 101mm (4.00")
MAGNETIC BLANK (No Code) - Standard "NO MAGNET" Piston M - Magnetic Piston and Sensor Mounting
127 - 127mm (5.00") 152 - 152mm (6.00")
OPTIONS EM - InchThreads (Mounting and Ports) (See product pages for sizes)
STROKE
HS - High Temperature Seals -10∞C to 150∞C (0∞F to 302∞F) (Available on ì LEî and ì LHî Models Only)
See Stroke Table
RE - Rod Eye RS - Male Stud for Rod End (Length - 2 x Thread Diameter) RF - 5mm (.197") Rod Extension RT - 10mm (.394") Rod Extension
TYPE BLANK (No Code) - Double Acting, Single Rod D - Double Acting, Double Rod S - Single Acting, Spring Retract R - Single Acting, Spring Extend
RV - 25mm (.984") Rod Extension SH - Hydraulic Option (35 Bar 500 PSI) Hydraulic Service (Not available on 12, 101, 127 and 152mm Bores) PE - Enlarged Ports (Available on 50, 63, 76, 101, 127 and 152mm Bores) UB - Urethane Shock Pads Both Ends (20 thru 76mm Bores) UF - Urethane Shock Pad Front (Rod End) (20 thru 76mm Bores) UR - Urethane Shock Pad Rear (Opposite Rod) (20 thru 76mm Bores)
9
Engineering Data
Piston Area Chart Maximum Pressure Ratings
Push (Rod Extend)
Pull (Rod Extend)
Standard Pnuematic
Hydraulic (SH Option)
Magnetic (SH Option)
12
1,13 cm (.18 in )
0,85 cm (.14 in )
150 PSI (10 Bar)
NA
NA
20
3,14 cm (.48 in )
2,64 cm (.40 in )
250 PSI (17 Bar)
500 PSI (34.5 Bar)
250 PSI (17 Bar)
25
4,91 cm (.76 in )
4,12 cm (.64 in )
250 PSI (17 Bar)
500 PSI (34.5 Bar)
250 PSI (17 Bar)
28.5
6,41 cm2 (1.0 in2)
5.28 cm2 (.82 in2)
250 PSI (17 Bar)
500 PSI (34.5 Bar)
250 PSI (17 Bar)
32
8,04 cm2 (1.25 in2)
6,91 cm2 (1.07 in2)
250 PSI (17 Bar)
500 PSI (34.5 Bar)
250 PSI (17 Bar)
40
12,56 cm2 (1.95 in2)
10,55 cm2 (1.64 in2)
250 PSI (17 Bar)
500 PSI (34.5 Bar)
250 PSI (17 Bar)
50
19,63 cm (3.04 in )
17,62 cm (2.73 in )
250 PSI (17 Bar)
500 PSI (34.5 Bar)
250 PSI (17 Bar)
63
31,17 cm (4.83 in )
28,03 cm (4.34 in )
250 PSI (17 Bar)
500 PSI (34.5 Bar)
250 PSI (17 Bar)
76
45,6 cm (7.07 in )
42,46 cm (6.59 in )
250 PSI (17 Bar)
500 PSI (34.5 Bar)
250 PSI (17 Bar)
101
81,07 cm (12.57 in )
77,93 cm (12.09 in )
200 PSI (14 Bar)
NA
NA
127
126,7 cm (19.6 in )
123,5 cm (19.1 in )
200 PSI (14 Bar)
NA
NA
152
181,46 cm (28.2 in )
176,55 cm (27.45 in )
200 PSI (14 Bar)
NA
NA
Bore
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2 2
2 2 2
2
2
2
2
2
2
2
2
2
Spring Forces (Type S,R) Bore Type Compressed Spring Force
Spring Rate
Cylinder Output Force Formula Piston Area x Pressure = Output Force
12
S,R
26.7 N (6 lbs)
0,6 N/mm (3.6 lbs/in)
Piston Area (in2) x Pressure (PSI) = lbf (Pounds Force)
20
S,R
40 N (9 lbs)
0,9 N/mm (5.5 lbs/in)
Piston Area (cm2) x Pressure (kg/cm2) = kgf (Kilograms Force)
25
S,R
29.8 N (6.7 lbs)
0,6 N/mm (3.51 lbs/in)
Piston Area (cm2) x Pressure (kg/cm2) x 9.8 = Newtons
28.5
S,R
57.8 N (13.0 lbs)
1,31 N/mm (7.53 lbs/in)
Piston Area (cm2) x Pressure (Bar) x 10 = Newtons
32
S,R
55.6 N (12.5 lbs)
1,31 N/mm (7.53 lbs/in)
Piston Area (cm2) x Pressure (Bar) x 1.02 = kgf (Kilograms Force)
Available Strokes Model LS - 10mm through 100mm in 5mm increments Model LS with Magnetic Piston - 5mm through 100mm in 5mm increments Models LE & LH (Standard and Magnetic Piston) - 5mm through 100mm in 5mm increments 28.5mm Bore (Standard and Magnetic Piston) - Model LS, LE & LH - 6.35mm through 101.6mm in 6.35mm increments Model LS, Type S and R - 5mm through 25mm in 5mm increments 28.5mm Bore (Model LS, Type S and R) - 6.35mm through 25.4mm in 6.35mm increments
Stroke Tolerance:
+1mm/-0mm (+.04"/-0")
Standard Lubrication:
Non-soap elastomer/PTFE thickener
Note: Stroke lengths are in millimeters. Enter stroke code above in appropriate place in part number. 5mm stroke not available as standard in LS model due to fitting interference. Contact the factory if a 5mm stroke is required in the LS model as this can be accomplished by special port locations. Other strokes available upon special order.
10
12mm (1/2") Bore
Non Magnetic Front Mount Cylinder "MF" MODEL LS LE LH LS
TYPE STANDARD STROKES 10mm - 50mm 5mm - 50mm 5mm - 50mm 5mm - 25mm S,R
"A" 16,0(0.63") 21,0(0.83") 26,0(1.03") 31,0(1.22")
Standard Threads "EM" Option M5X0,8 #10-32 M4X0,7 #8-32 M4X0,7 #8-32
PISTON AREA "B" "C" "D"
PUSH 1,13 cm² (0.18 in² ) PULL 0,85 cm² (0.14 in² )
20,0 SQ.(.787") 2,5(.098")
"A" + STROKE
13,5(.531")
6,4(.25") (2 PLACES)
3,25(.128") 3,0(.118") 3,25(.128")
Rear Mount Cylinder "MR"
4,1(.16")
W
W
X
13,5(.531")
Z
X
Z
Y
Mount Both End Cylinder "MB"
6,0(Ø.236") ROD "C" TAP
Y
W
"B" PORT (2 PLACES)
X
Z
"D" TAP X 10,2(.40") DP (2 PLACES)
Y
Non Magnetic Thru Mount Cylinder "MT" MODEL LS LE LH LS
TYPE STANDARD STROKES 10mm - 20mm 5mm - 15mm 5mm - 10mm 5mm S,R
"A" 16,0(0.63") 21,0(0.83") 26,0(1.03") 31,0(1.22")
PISTON AREA "B" "C"
PUSH 1,13 cm² (0.18 in² )
Standard Threads "EM" Option M5X0,8 #10-32 M4X0,7 #8-32
PULL 0,85 cm² (0.14 in² )
20,0 SQ.(.787") 2,5(.098")
"A" + STROKE
13,5(.531")
6,4(.25") (2 PLACES)
3,25(.128") 3,0(.118") 3,25(.128")
13,5(.531")
4,1(.16")
W
X
Z
6,0(Ø.236) ROD "C" TAP
Y
"B" PORT (2 PLACES)
3,5 DIA.(Ø.136") DRILL THRU (2 PLACES) 5,6 DIA.(Ø.22") C'BORE X 5,0(.20") DP (4 PLACES, 2 PER FACE)
12 MODEL
BORE
x STROKE
TYPE
MOUNTING
LS LE LH 5mm - 50mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD S - SINGLE ACTING, SPRING RETRACT R - SINGLE ACTING, SPRING EXTEND MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58) PR - REAR PIVOT (FOR PIVOT SEE PAGE 60)
OPTIONS
EM - INCH THREADS & PORT OPTIONS HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61)
11
12mm (1/2") Bore Magnetic Front Mount Cylinder "MF" TYPE STANDARD STROKES 10mm - 50mm 5mm - 50mm 5mm - 50mm 5mm - 25mm S,R
MODEL LS LE LH LS
20,0 SQ.(.787")
"A" 26,0(1.03") 31,0(1.23") 36,0(1.42") 41,0(1.62")
PISTON AREA
PULL 0,85 cm² (0.14 in² )
2,5(.098")
Standard Threads "EM" Option M5X0,8 #10-32 M4X0,7 #8-32 M4X0,7 #8-32
"B" "C" "D"
PUSH 1,13 cm² (0.18 in² )
"A" + STROKE
13,5(.531") 3,25(.128") 3,25(.128")
W
13,5(.531")
6,4(.25") (2 PLACES)
3,0(.118")
X
Z
W
X
Z
Y
Mount Both End Cylinder "MB"
6,0(Ø.236") ROD "C" TAP
Y
Rear Mount Cylinder "MR"
4,1(.16")
SENSOR MOUNTING TRACK (2 PLACES)
W
"B" PORT (2 PLACES)
X
Z
"D" TAP X 10,2(.40") DP (2 PLACES)
Y
Magnetic Thru Mount Cylinder "MT" TYPE STANDARD STROKES
MODEL
"A"
PISTON AREA
LS
-
10mm
26,0(1.03")
PUSH 1,13 cm² (0.18 in² )
LE
-
5mm
31,0(1.23")
PULL 0,85 cm² (0.14 in² )
20,0 SQ.(.787")
"B" "C"
2,5(.098")
Standard Threads "EM" Option M5X0,8 #10-32 M4X0,7 #8-32
"A" + STROKE
13,5(.531")
6,4(.25") (2 PLACES)
3,25(.128") 3,0(.118")
3,25(.128")
SENSOR MOUNTING TRACK (2 PLACES)
W
13,5(.531")
4,1(.16")
X
Z
6,0(Ø.236) ROD "C" TAP
Y
"B" PORT (2 PLACES)
3,5 DIA.(Ø.136") DRILL THRU (2 PLACES) 5,6 DIA.(Ø.22") C'BORE X 5,0(.20") DP (4 PLACES, 2 PER FACE)
12 MODEL
BORE
x
M STROKE
LS LE LH 5mm - 50mm STROKE (SEE STROKE RANGE)
TYPE
MOUNTING MAGNETIC
BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD S - SINGLE ACTING, SPRING RETRACT R - SINGLE ACTING, SPRING EXTEND MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58) PR - REAR PIVOT (FOR PIVOT SEE PAGE 60)
12
OPTIONS
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54)
EM - INCH THREADS & PORT OPTIONS HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61)
12mm (1/2") Bore Magnetic Side Mount Cylinder "MS" MODEL
TYPE STANDARD STROKES
PISTON AREA
"A"
LS
-
10mm
26,0(1.03")
PUSH 1,13 cm² (0.18 in² )
LE
-
5mm
31,0(1.23")
PULL 0,85 cm² (0.14 in² )
"A" + STROKE
3,0(.118")
20,0 SQ. (.787")
6,4(.25") (2 PLACES)
8,0(.315")
2,5(.098")
3,0(.118")
SENSOR MOUNTING TRACK (2 PLACES)
Y
X
4,1(.16")
Standard Threads "EM" Option M5X0,8 #10-32 M4X0,7 #8-32 M3X0,5 #4-40
"B" "C" "D"
14,0(.551")
Z
W
"B" PORT (2 PLACES)
"D" TAP X 4,5(.18") DP (2 PLACES)
6,0(Ø.236") ROD "C" TAP
Magnetic Side Mount Cylinder "MS" MODEL LS LE LH LS
TYPE STANDARD STROKES 15mm - 50mm 10mm - 50mm 5mm - 50mm S,R 5mm - 25mm
"A" 26,0(1.03") 31,0(1.23") 36,0(1.42") 41,0(1.62")
PISTON AREA
"B" "C" "D"
PUSH 1,13 cm² (0.18 in² ) PULL 0,85 cm² (0.14 in² )
Standard Threads "EM" Option M5X0,8 #10-32 M4X0,7 #8-32 M3X0,5 #4-40
"A" + STROKE 3,0(.118")
20,0 SQ. (.787")
6,4(.25") (2 PLACES)
8,0(.315")
2,5(.098")
3,0(.118")
Y
X
4,1(.16")
Z
W
"B" PORT (2 PLACES)
6,0(Ø.236") ROD "C" TAP
12 MODEL
LS LE LH
BORE
x
14,0(.551")
SENSOR MOUNTING TRACK (2 PLACES)
M STROKE
TYPE
5mm - 50mm STROKE (SEE STROKE RANGE)
BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD S - SINGLE ACTING, SPRING RETRACT R - SINGLE ACTING, SPRING EXTEND MS - SIDE MOUNT FE - FLANGE ON END FS - FLANGE ON SIDE (SEE PAGE 59)
8,0(.315")
MOUNTING MAGNETIC
OPTIONS
"D" TAP X 4,5(.18") DP (4 PLACES)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54)
EM - INCH THREADS & PORT OPTIONS HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61)
13
12mm (1/2") Bore
Non Magnetic Side Mount Cylinder "MS" MODEL LS LE LH LS
TYPE STANDARD STROKES 10mm - 20mm 5mm - 15mm 5mm - 10mm 5mm S,R
"A" 16,0(0.63") 21,0(0.83") 26,0(1.03") 31,0(1.22")
PISTON AREA "B" "C" "D"
PUSH 1,13 cm² (0.18 in² ) PULL 0,85 cm² (0.14 in² )
"A" + STROKE
3,0(.118")
20,0 SQ. (.787")
6,4(.25")
8,0(.315")
2,5(.098")
3,0(.118")
Y
X
4,1(.16")
Standard Threads "EM" Option M5X0,8 #10-32 M4X0,7 #8-32 M3X0,5 #4-40
14,0(.551")
Z
W
"B" PORT (2 PLACES)
"D" TAP X 4,5 DP (2 PLACES)
6,0(Ø.236") ROD "C" TAP
Non Magnetic Side Mount Cylinder "MS" MODEL LS LE LH LS
TYPE STANDARD STROKES 25mm - 50mm 20mm - 50mm 15mm - 50mm 10mm - 25mm S,R
PISTON AREA
"A" 16,0(0.63") 21,0(0.83") 26,0(1.03") 31,0(1.22")
"B" "C" "D"
PUSH 1,13 cm² (0.18 in² ) PULL 0,85 cm² (0.14 in² )
Standard Threads "EM" Option #10-32 M5X0,8 M4X0,7 #8-32 M3X0,5 #4-40
"A" + STROKE 3,0(.118")
20,0 SQ. (.787") 6,4(.25") (2 PLACES)
8,0(.315")
2,5(.098")
3,0(.118")
Y
X
4,1(.16")
"D" TAP X 4,5(.18") DP (4 PLACES)
6,0(Ø.236") ROD "C" TAP
x
BORE
STROKE
TYPE
LS LE LH
MOUNTING
OPTIONS
EM - INCH THREADS & PORT OPTIONS
5mm - 50mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD S - SINGLE ACTING, SPRING RETRACT R - SINGLE ACTING, SPRING EXTEND MS - SIDE MOUNT FE - FLANGE ON END FS - FLANGE ON SIDE (SEE PAGE 59)
14
14,0(.551")
Z
W
"B" PORT (2 PLACES)
12 MODEL
8,0(.315")
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61)
20mm (3/4") Bore
Non Magnetic Front Mount Cylinder "MF" MODEL LS LE LH LS
TYPE STANDARD STROKES _,D 10mm - 50mm 5mm - 100mm _,D 5mm - 100mm 5mm - 25mm S,R
"A" 18,5(0.73") 23,5(0.93") 28,5(1.12") 33,5(1.32")
PULL 2,64 cm² (0.40 in² ) 3,0(.118")
21,0 (.827")
4,5(.177")
"B" "C" "D"
PUSH 3,14 cm² (0.48 in² )
30,0(1.181") SQ.
4,5(.177")
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32 M5X0,8 #10-32
PISTON AREA
TYPE D 3,0(.118") + STROKE
"A" + STROKE
6,9(.272") (2 PLACES)
W
21,0(.827")
5,6(.220")
X
Z
"D" TAP X 12,7(.50") DP (2 PLACES)
Y
"B" PORT (2 PLACES)
8,0(Ø.315) ROD "C" TAP
Rear Mount Cylinder "MR"
Mount Both End Cylinder "MB"
W
X
W
Z
X
Z
Y
Y
Non Magnetic Thru Mount Cylinder "MT" MODEL LS LE LH LS
TYPE STANDARD STROKES _,D 10mm - 25mm 5mm - 20mm _,D 5mm - 15mm 5mm - 10mm S,R
"A" 18,5(0.73") 23,5(0.93") 28,5(1.12") 33,5(1.32")
"B" "C"
PULL 2,64 cm² (0.40 in² )
30,0(1.181") SQ.
3,0(.118")
21,0 (.827")
"A" + STROKE
TYPE D 3,0(.118") + STROKE
6,9(.272") (2 PLACES)
4,5(.177") 4,5(.177")
Standard Threads "EM" Option #10-32 M5X0,8 M5X0,8 #10-32
PISTON AREA PUSH 3,14 cm² (0.48 in² )
W
21,0(.827")
Y 8,0(Ø.315) ROD "C" TAP
20 MODEL
5,6(.220")
X
Z
BORE
4,2(Ø.165") DRILL THRU (2 PLACES) 7,6(Ø.300) C'BORE X 4,5(.177") DP. (4 PLACES, 2 PER FACE)
"B" PORT (2 PLACES)
x STROKE
TYPE
MOUNTING
LS LE LH 5mm - 100mm STROKE (SEE STROKE RANGE)
BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD S - SINGLE ACTING, SPRING RETRACT R - SINGLE ACTING, SPRING EXTEND MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58) PR - REAR PIVOT PL - LONG PIVOT (FOR PIVOTS SEE PAGE 60)
OPTIONS
EM - INCH THREADS & PORT OPTIONS HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
15
20mm (3/4") Bore Magnetic Front Mount Cylinder "MF" MODEL LS LE LH LS
TYPE STANDARD STROKES _,D 10mm - 50mm _ 5mm - 100mm _,D 5mm - 100mm 5mm - 25mm S,R
PISTON AREA "A" 23,5(0.93") PUSH 3,14 cm² (0.48 in² ) 28,5(1.12") 33,5(1.32") PULL 2,64 cm² (0.40 in² ) 38,5(1.52")
30,0(1.181") SQ.
3,0(.118")
21,0 (.827")
SENSOR MOUNTING TRACK (2 PLACES)
W
21,0(.827")
TYPE D 3,0(.118") + STROKE
"A" + STROKE
6,9(.272") (2 PLACES)
4,5(.177") 4,5(.177")
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32 M5X0,8 #10-32
"B" "C" "D"
5,6(.220")
X
Z
"D" TAP X 12,7(.50") DP (2 PLACES)
Y
"B" PORT (2 PLACES)
8,0(Ø.315) ROD "C" TAP
Rear Mount Cylinder "MR"
Mount Both End Cylinder "MB"
W
X
W
Z
X
Z
Y
Y
Magnetic Thru Mount Cylinder "MT" MODEL LS LE LH LS
TYPE STANDARD STROKES 10mm - 20mm _,D _ 5mm - 15mm _,D 5mm - 10mm 5mm S,R
"A" 23,5(0.93") 28,5(1.12") 33,5(1.32") 38,5(1.52")
PISTON AREA
PULL 2,64 cm² (0.40 in² )
30,0(1.181") SQ.
3,0(.118")
21,0 (.827")
4,5(.177") 4,5(.177")
8,0(Ø.315) ROD "C" TAP
BORE
4,2(Ø.165") DRILL THRU (2 PLACES) 7,6(Ø.300) C'BORE X 4,5(.177") DP. (4 PLACES, 2 PER FACE)
x
"B" PORT (2 PLACES) SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54)
M STROKE
TYPE
LS LE LH 5mm - 100mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD S - SINGLE ACTING, SPRING RETRACT R - SINGLE ACTING, SPRING EXTEND
16
5,6(.220")
X
Y
MODEL
TYPE D 3,0(.118") + STROKE
SENSOR MOUNTING TRACK (2 PLACES)
Z
20
"A" + STROKE
6,9(.272") (2 PLACES)
W
21,0(.827")
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32
"B" "C"
PUSH 3,14 cm² (0.48 in² )
MOUNTING
MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58) PR - REAR PIVOT PL - LONG PIVOT (FOR PIVOTS SEE PAGE 60)
MAGNETIC
OPTIONS
EM - INCH THREADS & PORT OPTIONS HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
20mm (3/4") Bore Magnetic Side Mount Cylinder "MS" MODEL LS LE LH
TYPE STANDARD STROKES "A" _,D 23,5(0.93") 10mm - 15mm 28,5(1.12") _ 5mm - 10mm _,D 33,5(1.32") 5mm
TYPE D 3,0(.118") + STROKE
PISTON AREA
PULL 2,64 cm² (0.40 in² )
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32 M4X0,7 #8-32
30,0(1.181") SQ.
"A" + STROKE
3,0(.118")
10,0(.394") 4,5(.177")
Y
X
21,0(.827")
Z
W
5,6(.220") "B" PORT (2 PLACES)
6,9(.272") (2 PLACES)
"B" "C" "D"
PUSH 3,14 cm² (0.48 in² )
SENSOR MOUNTING TRACK (2 PLACES)
8,0(Ø.315) ROD "C" TAP
"D" TAP X 6,0(.24") DP. (2 PLACES)
Magnetic Side Mount Cylinder "MS" MODEL LS LE LH LS
TYPE STANDARD STROKES _,D 20mm - 50mm _ 15mm - 100mm _,D 10mm - 100mm 5mm - 25mm S,R
TYPE D 3,0(.118") + STK.
"A" + STROKE
"A" 23,5(0.93") 28,5(1.12") 33,5(1.32") 38,5(1.52")
PISTON AREA PULL 2,64 cm² (0.40 in² )
3,0(.118")
10,0(.394")
X
W "B" PORT (2 PLACES)
21,0(.827")
SENSOR MOUNTING TRACK (2 PLACES)
"D" TAP X 6,0(.24") DP. (4 PLACES)
8,0(Ø.315) ROD "C" TAP
20 LS LE LH
10,0(.394")
4,5(.177")
Z
5,6(.220")
MODEL
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32 M4X0,7 #8-32
30,0(1.181") SQ.
Y
6,9(.272") (2 PLACES)
"B" "C" "D"
PUSH 3,14 cm² (0.48 in² )
BORE
x
M STROKE
TYPE
MOUNTING
MAGNETIC
OPTIONS
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54)
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD S - SINGLE ACTING, SPRING RETRACT R - SINGLE ACTING, SPRING EXTEND MS - SIDE MOUNT FE - FLANGE ON END FS - FLANGE ON SIDE (SEE PAGE 59)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
17
20mm (3/4") Bore Non Magnetic Side Mount Cylinder "MS" TYPE STANDARD STROKES _,D 10mm - 20mm _ 5mm - 15mm _,D 5mm - 10mm 5mm S,R
MODEL LS LE LH LS
TYPE D 3,0(.118") + STROKE
PISTON AREA "A" 18,5(0.73") PUSH 3,14 cm² (0.48 in² ) 23,5(0.93") 28,5(1.12") PULL 2,64 cm² (0.40 in² ) 33,5(1.32")
"B" "C" "D"
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32 M4X0,7 #8-32
30,0(1.181") SQ.
"A" + STROKE
3,0(.118")
10,0(.394") 4,5(.177")
Y
X
21,0(.827")
Z
5,6(.220")
W "B" PORT (2 PLACES)
6,9(.272") (2 PLACES)
"D" TAP X 6,0(.24") DP. (2 PLACES)
8,0(Ø.315) ROD "C" TAP
Non Magnetic Side Mount Cylinder "MS" TYPE STANDARD STROKES 25mm - 50mm _,D _ 20mm - 100mm _,D 15mm - 100mm S,R 10mm - 25mm
MODEL LS LE LH LS
TYPE D 3,0(.118") + STK.
"A" + STROKE
"A" 18,5(0.73") 23,5(0.93") 28,5(1.12") 33,5(1.32")
PISTON AREA
PULL 2,64 cm² (0.40 in² )
Standard Threads "EM" Option #10-32 M5X0,8 M5X0,8 #10-32 M4X0,7 #8-32
30,0(1.181") SQ.
3,0(.118")
10,0(.394")
10,0(.394")
4,5(.177")
Y
X
Z
21,0(.827")
W
5,6(.220") "B" PORT (2 PLACES)
6,9(.272") (2 PLACES)
20 MODEL
LS LE LH
BORE
"D" TAP X 6,0(.24") DP. (4 PLACES)
8,0(Ø.315) ROD "C" TAP
x STROKE
TYPE
MOUNTING
OPTIONS
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE)
BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD S - SINGLE ACTING, SPRING RETRACT R - SINGLE ACTING, SPRING EXTEND MS - SIDE MOUNT FE - FLANGE ON END FS - FLANGE ON SIDE (SEE PAGE 59)
18
"B" "C" "D"
PUSH 3,14 cm² (0.48 in² )
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
25mm (1.0") Bore
Non Magnetic Front Mount Cylinder "MF" TYPE STANDARD STROKES _,D 10mm - 50mm _ 5mm - 100mm _,D 5mm - 100mm 5mm - 25mm S,R
MODEL LS LE LH LS
"A" 19,0(0.75") 24,0(0.95") 29,0(1.14") 34,0(1.34")
PISTON AREA "B" "C" "D"
PUSH 4,91 cm² (0.76 in² ) PULL 4,12 cm² (0.64 in² )
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32 M5X0,8 #10-32 TYPE D 5,0(.197") + STK.
"A" + STROKE
35,0(1.378") SQ. 5,0(.197")
25,4 (1.00")
Rear Mount Cylinder "MR"
W
6,9(.272") (2 PLACES)
4,75(.187")
W
4,75(.187")
X
6,1(.240") 25.4 (1.00")
Z
Y
Mount Both End Cylinder "MB"
X
W
Z
Y
10,0(Ø.394") ROD "C" TAP
Z
"D" TAP X 12,7(.50") DP (2 PLACES)
X
"B" PORT (2 PLACES) Y
Non Magnetic Thru Mount Cylinder "MT" MODEL LS LE LH LS
TYPE STANDARD STROKES 10mm - 25mm _,D _ 5mm - 20mm _,D 5mm - 15mm S,R 5mm - 10mm
"A" 19,0(0.75") 24,0(0.95") 29,0(1.14") 34,0(1.34")
PISTON AREA
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32
PULL 4,12 cm² (0.64 in² )
35,0(1.378") SQ.
"A" + STROKE
5,0(.197")
25,4 (1.00")
4,75(.187")
"B" "C"
PUSH 4,91 cm² (0.76 in² )
TYPE D 5,0(.197") + STK.
6,9(.272") (2 PLACES)
W
4,75(.187")
6,1(.240") 25.4 (1.00")
Z
X
4,2(Ø.165") DRILL THRU (2 PLACES) 7,6(Ø.300) C'BORE X 4,5(.177") DP. (4 PLACES, 2 PER FACE)
25 MODEL
BORE
Y
"B" PORT (2 PLACES)
10,0(Ø.394") ROD "C" TAP
x STROKE
TYPE
MOUNTING
LS LE LH
OPTIONS
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE)
BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD S - SINGLE ACTING, SPRING RETRACT R - SINGLE ACTING, SPRING EXTEND MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58) PR - REAR PIVOT PL - LONG PIVOT (FOR PIVOTS SEE PAGE 60)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/8-27 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
19
25mm (1.0") Bore Magnetic Front Mount Cylinder "MF" MODEL LS LE LH LS
TYPE STANDARD STROKES _,D 10mm - 50mm _ 5mm - 100mm _,D 5mm - 100mm 5mm - 25mm S,R
"A" 24,0(0.95") 29,0(1.14") 34,0(1.34") 39,0(1.54")
PISTON AREA
PULL 4,12 cm² (0.64 in² )
35,0(1.378") SQ.
SENSOR MOUNTING TRACK (2 PLACES) 4,75(.187")
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32 M5X0,8 #10-32 TYPE D 5,0(.197") + STK.
"A" + STROKE
5,0(.197")
25,4 (1.00")
"B" "C" "D"
PUSH 4,91 cm² (0.76 in² )
Rear Mount Cylinder "MR"W
6,9(.272") (2 PLACES)
W
4,75(.187")
X
25.4 (1.00")
6,1(.240")
Z
Y
X
Mount Both End Cylinder "MB" W
Y
10,0(Ø.394") ROD "C" TAP
Z
Z
"D" TAP X 12,7(.50") DP (2 PLACES)
X
"B" PORT (2 PLACES) Y
Magnetic Thru Mount Cylinder "MT" MODEL LS LE LH LS
TYPE STANDARD STROKES 10mm - 20mm _,D _ 5mm - 15mm _,D 5mm - 10mm S,R 5mm
"A" 24,0(0.95") 29,0(1.14") 34,0(1.34") 39,0(1.54")
PISTON AREA PUSH 4,91 cm² (0.76 in² )
5,0(.197")
25,4 (1.00")
6,1(.240")
25.4 (1.00")
Z
X
Y
4,2(Ø.165") DRILL THRU (2 PLACES) 7,6(Ø.300) C'BORE X 4,5(.177") DP. (4 PLACES, 2 PER FACE)
LS LE LH
BORE
"B" PORT (2 PLACES)
10,0(Ø.394") ROD "C" TAP
x
M STROKE
TYPE
MOUNTING
MAGNETIC
OPTIONS
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54)
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE)
BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD S - SINGLE ACTING, SPRING RETRACT R - SINGLE ACTING, SPRING EXTEND MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58)
20
TYPE D 5,0(.197") + STK.
W
4,75(.187")
MODEL
"A" + STROKE
6,9(.272") (2 PLACES)
4,75(.187")
25
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32
PULL 4,12 cm² (0.64 in² )
35,0(1.378") SQ.
SENSOR MOUNTING TRACK (2 PLACES)
"B" "C"
PR - REAR PIVOT PL - LONG PIVOT (FOR PIVOTS SEE PAGE 60)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/8-27 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
25mm (1.0") Bore Magnetic Side Mount Cylinder "MS" PISTON AREA TYPE STANDARD STROKES "A" _,D 24,0(0.95") 10mm - 15mm PUSH 4,91 cm² (0.76 in² ) 29,0(1.14") _ 5mm - 10mm ² ² 34,0(1.34") PULL 4,12 cm (0.64 in ) 5mm _,D
MODEL LS LE LH TYPE D 5,0(.197") + STK.
35,0(1.378") SQ.
"A" + STROKE
5,0(.197")
10,0(.394")
Y
4,75(.187")
X
25,4(1.00")
Z
6,1(.240")
W "B" PORT (2 PLACES)
6,9(.272") (2 PLACES)
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32 M5X0,8 #10-32
"B" "C" "D"
10,0(Ø.394") ROD "C" TAP
SENSOR MOUNTING TRACK (2 PLACES)
"D" TAP X 7,5(.30") DP. (2 PLACES)
Magnetic Side Mount Cylinder "MS" MODEL LS LE LH LS
TYPE STANDARD STROKES 20mm - 50mm _,D _ 15mm - 100mm _,D 10mm - 100mm S,R 5mm - 25mm
TYPE D 5,0(.197") + STK.
"A" 24,0(0.95") 29,0(1.14") 34,0(1.34") 39,0(1.54")
PISTON AREA
PULL 4,12 cm² (0.64 in² )
35,0(1.378") SQ.
5,0 (.197")
"A" + STROKE
6,1(.240")
4,75 (.187")
6,9(.272") (2 PLACES)
25 MODEL
LS LE LH
BORE
Z
W
"B" PORT (2 PLACES)
25,4(1.00")
SENSOR MOUNTING TRACK (2 PLACES)
10,0(Ø.394") ROD "C" TAP
x
M STROKE
TYPE
MOUNTING
MAGNETIC
10,0 (.394")
10,0 (.394")
Y
X
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32 M5X0,8 #10-32
"B" "C" "D"
PUSH 4,91 cm² (0.76 in² )
OPTIONS
"D" TAP X 7,5(.30") DP. (4 PLACES)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54)
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD S - SINGLE ACTING, SPRING RETRACT R - SINGLE ACTING, SPRING EXTEND MS - SIDE MOUNT FE - FLANGE ON END FS - FLANGE ON SIDE (SEE PAGE 59)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/8-27 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
21
25mm (1.0") Bore Non Magnetic Side Mount Cylinder "MS" TYPE STANDARD STROKES _,D 10mm - 20mm _ 5mm - 15mm _,D 5mm - 10mm 5mm S,R
MODEL LS LE LH LS TYPE D 5,0(.197") + STK.
"A" 19,0(0.75") 24,0(0.95") 29,0(1.14") 34,0(1.34")
"A" + STROKE
PISTON AREA
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32 M5X0,8 #10-32
"B" "C" "D"
PUSH 4,91 cm² (0.76 in² ) PULL 4,12 cm² (0.64 in² ) 35,0(1.378") SQ.
5,0(.197")
10,0(.394")
Y
4,75(.187")
X
25,4(1.00")
Z
6,1(.240")
W "B" PORT (2 PLACES)
6,9(.272") (2 PLACES)
"D" TAP X 7,5(.30") DP. (2 PLACES)
10,0(Ø.394") ROD "C" TAP
Non Magnetic Side Mount Cylinder "MS" MODEL LS LE LH LS
TYPE STANDARD STROKES 25mm - 50mm _,D _ 20mm - 100mm _,D 15mm - 100mm S,R 10mm - 25mm
TYPE D 5,0(.197") + STK.
PISTON AREA "A" 19,0(0.75") ² ² 24,0(0.95") PUSH 4,91 cm (0.76 in ) 29,0(1.14") PULL 4,12 cm² (0.64 in² ) 34,0(1.34") 35,0(1.378") SQ.
5,0 (.197")
"A" + STROKE
4,75 (.187")
X
6,9(.272") (2 PLACES)
25 MODEL
LS LE LH
BORE
25,4(1.00")
"D" TAP X 7,5(.30") DP. (4 PLACES)
10,0(Ø.394") ROD "C" TAP
x STROKE
TYPE
MOUNTING
OPTIONS
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD S - SINGLE ACTING, SPRING RETRACT R - SINGLE ACTING, SPRING EXTEND MS - SIDE MOUNT FE - FLANGE ON END FS - FLANGE ON SIDE (SEE PAGE 59)
22
Z
W
"B" PORT (2 PLACES)
10,0 (.394")
10,0 (.394")
Y
6,1(.240")
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32 M5X0,8 #10-32
"B" "C" "D"
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/8-27 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
28,5mm (1-1/8") Bore
Non Magnetic Front Mount Cylinder "MF" MODEL LS LE LH LS
PISTON AREA TYPE STANDARD STROKES "A" _,D 6,35mm - 101,6mm 19,05(.75") PUSH 6,41 cm² (1.0 in² ) _ 6,35mm - 101,6mm 25,4(1.00") _,D 6,35mm - 101,6mm 31,75(1.25") PULL 5,28 cm² (0.82 in² ) S,R 6,35mm - 25,4mm 31,75(1.25") 38,1(1.500") SQ.
3,2 (.125")
28,6 (1.125")
Rear Mount Cylinder "MR"
7,1(.280") (2 PLACES)
4,75(.187") 4,75(.187")
TYPE D 3,2(.125") + STK.
"A" + STROKE
W
X
6,4(.250") 28,6(1.125")
Z
Y
W
Z
1/4-20 TAP X .63 DP (2 PLACES)
Y
Z
Mount Both End Cylinder "MB"
X
12,0(Ø.472") ROD 5/16-18 TAP
W
1/8-27 PORT (2 PLACES)
X
Y
Non Magnetic Thru Mount Cylinder "MT" MODEL LS LE LH LS
TYPE STANDARD STROKES _,D 6,35mm - 25,4mm _ 6,35mm - 19,05mm _,D 6,35mm - 12,7mm S,R 6,35mm - 12,7mm
PISTON AREA "A" 19,05(.75") PUSH 6,41 cm² (1.0 in² ) 25,4(1.00") 31,75(1.25") PULL 5,28 cm² (0.82 in² ) 31,75(1.25")
38,1(1.500") SQ.
3,2 (.125")
28,6 (1.125")
7,1(.280") (2 PLACES)
4,75(.187") 4,75(.187")
TYPE D 3,2(.125") + STK.
"A" + STROKE
W
6,4(.250") 28,6(1.125")
Z
X
Y
12,0(Ø.472") ROD 5/16-18 TAP
28,5 MODEL
BORE
5,2(Ø.204") DRILL THRU (2 PLACES) 8,5(Ø.334") C'BORE X 5,3(.210") DP (4 PLACES, 2 PER FACE)
1/8-27 PORT (2 PLACES)
x STROKE
TYPE
LS LE LH
MOUNTING
OPTIONS
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62)
6,35mm - 101,6mm STROKE (SEE STROKE RANGE)
RE - ROD EYE (SEE PAGE 61)
BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD S - SINGLE ACTING, SPRING RETRACT R - SINGLE ACTING, SPRING EXTEND
RS - MALE STUD FOR ROD END (SEE PAGE 61)
MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58) PR - REAR PIVOT PL - LONG PIVOT (FOR PIVOTS SEE PAGE 60)
RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
23
28,5mm (1-1/8") Bore Magnetic Front Mount Cylinder "MF" MODEL LS LE LH LS
TYPE STANDARD STROKES _,D 6,35mm - 101,6mm _ 6,35mm - 101,6mm _,D 6,35mm - 101,6mm S,R 6,35mm - 25,4mm
PISTON AREA "A" 25,4(1.00") PUSH 6,41 cm² (1.0 in² ) 31,75(1.25") 38,1(1.50") PULL 5,28 cm² (0.82 in² ) 38,1(1.50")
38,1(1.500") SQ.
3,2 (.125")
28,6 (1.125")
TYPE D 3,2(.125") + STK.
"A" + STROKE
7,1(.280") (2 PLACES)
4,75(.187")
Rear Mount Cylinder "MR"
W
W
4,75(.187")
Z
X
6,4(.250") 28,6(1.125")
X
Z
Y
12,0(Ø.472") ROD 5/16-18 TAP
Y
Mount Both End Cylinder "MB"
SENSOR MOUNTING TRACK (2 PLACES)
W
1/8-27 PORT (2 PLACES)
1/4-20 TAP X .63 DP (2 PLACES)
Z
X
Y
Magnetic Thru Mount Cylinder "MT" MODEL LS LE LH LS
PISTON AREA TYPE STANDARD STROKES "A" _,D 6,35mm - 19,05mm 25,4(1.00") PUSH 6,41 cm² (1.0 in² ) 31,75(1.25") _ 6,35mm - 12,7mm 38,1(1.50") _,D 6,35mm PULL 5,28 cm² (0.82 in² ) 38,1(1.50") S,R 6,35mm 38,1(1.500") SQ.
3,2 (.125")
28,6 (1.125")
7,1(.280") (2 PLACES)
4,75(.187")
W
4,75(.187")
28,6(1.125")
Z
X
Y
12,0(Ø.472") ROD 5/16-18 TAP
28,5 MODEL
LS LE LH
BORE
SENSOR MOUNTING TRACK (2 PLACES)
6,4(.250")
5,2(Ø.204") DRILL THRU (2 PLACES) 8,5(Ø.334") C'BORE X 5,3(.210") DP (4 PLACES, 2 PER FACE)
x
M STROKE
TYPE
6,35mm - 101,6mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD S - SINGLE ACTING, SPRING RETRACT R - SINGLE ACTING, SPRING EXTEND MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58)
24
TYPE D 3,2(.125") + STK.
"A" + STROKE
PR - REAR PIVOT PL - LONG PIVOT (FOR PIVOTS SEE PAGE 60)
MOUNTING
MAGNETIC
OPTIONS
1/8-27 PORT (2 PLACES)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54) HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
28,5mm (1-1/8") Bore Magnetic Side Mount Cylinder "MS" PISTON AREA TYPE STANDARD STROKES "A" 25,4(1.00") PUSH 6,41 cm² (1.0 in² ) 6,35mm - 12,7mm _,D 31,75(1.25") PULL 5,28 cm² (0.82 in² ) _ 6,35mm
MODEL LS LE
TYPE D 3,2(.125") + STK.
"A" + STROKE
38,1(1.500") SQ.
3,2 (.125")
9,5(.375") 4,75 (.187")
Y
X
6,4(.250")
W
1/8-27 PORT (2 PLACES)
7,1(.280") (2 PLACES)
28,6(1.125")
Z
12,0(Ø.472") ROD 5/16-18 TAP
SENSOR MOUNTING TRACK (2 PLACES)
#10-24 TAP X .31 DP (2 PLACES)
Magnetic Side Mount Cylinder "MS" PISTON AREA TYPE STANDARD STROKES "A" _,D 19,05mm - 101,6mm 25.4(1.00") PUSH 6,41 cm² (1.0 in² ) _ 12,7mm - 101,6mm 31,75(1.25") _,D 6,35mm - 101,6mm 38,1(1.50") PULL 5,28 cm² (0.82 in² ) S,R 6,35mm - 25,4mm 38,1(1.50")
MODEL LS LE LH LS
TYPE D 3,2(.125") + STK.
"A" + STROKE
9,5(.375")
3,2 (.125)
9,5(.375")
38,1(1.500") SQ.
4,75 (.187")
Y
X
6,4(.250")
12,0(Ø.472") ROD 5/16-18 TAP
28.5 MODEL
LS LE LH
BORE
28,6(1.125")
W
1/8-27 PORT (2 PLACES)
7,1(.280") (2 PLACES)
Z
x
M STROKE
TYPE
6.35mm - 101.6mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD S - SINGLE ACTING, SPRING RETRACT R - SINGLE ACTING, SPRING EXTEND MS - SIDE MOUNT FE - FLANGE ON END FS - FLANGE ON SIDE (SEE PAGE 59)
MOUNTING MAGNETIC
#10-24 TAP X .31 DP (4 PLACES)
SENSOR MOUNTING TRACK (2 PLACES)
OPTIONS
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
25
28,5mm (1-1/8") Bore
Non Magnetic Side Mount Cylinder "MS" MODEL LS LE LH
PISTON AREA TYPE STANDARD STROKES "A" 6,35mm - 19,05mm 19,05(0.75") _,D PUSH 6,41 cm² (1.0 in² ) _ 6,35mm - 12,7mm 25,4(1.00") ² ² 6,35mm 31,75(1.25") PULL 5,28 cm (0.82 in ) _,D
TYPE D 3,2(.125") + STK.
"A" + STROKE
9,5(.375")
38,1(1.500") SQ.
3,2 (.125")
4,75 (.187")
Y
X
6,4(.250")
W
1/8-27 PORT (2 PLACES)
7,1(.280") (2 PLACES)
28,6(1.125")
Z
#10-24 TAP X .31 DP (2 PLACES)
12,0(Ø.472") ROD 5/16-18 TAP
Non Magnetic Side Mount Cylinder "MS" MODEL LS LE LH LS
PISTON AREA TYPE STANDARD STROKES "A" _,D 25,4mm - 101,6mm 19,05(0.75") PUSH 6,41 cm² (1.0 in² ) _ 19,05mm - 101,6mm 25,4(1.00") _,D 12,7mm - 101,6mm 31,75(1.25") PULL 5,28 cm² (0.82 in² ) S,R 6,35mm - 25,4mm 31,75(1.25")
TYPE D 3,2(.125") + STK.
9,5(.375")
3,2 (.125)
"A" + STROKE
38,1(1.500") SQ.
9,5(.375") 4,75 (.187")
Y
X
6,4(.250")
28,5 MODEL
BORE
#10-24 TAP X .31 DP (4 PLACES)
12,0(Ø.472") ROD 5/16-18 TAP
x STROKE
TYPE
LS LE LH
MOUNTING
OPTIONS
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62)
6,35mm - 101,6mm STROKE (SEE STROKE RANGE)
BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD S - SINGLE ACTING, SPRING RETRACT R - SINGLE ACTING, SPRING EXTEND MS - SIDE MOUNT FE - FLANGE ON END FS - FLANGE ON SIDE (SEE PAGE 59)
26
28,6(1.125")
W
1/8-27 PORT (2 PLACES)
7,1(.280") (2 PLACES)
Z
RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
32mm (1-1/4") Bore
Non Magnetic Front Mount Cylinder "MF" TYPE STANDARD STROKES _,D 10mm - 100mm _ 5mm - 100mm 5mm - 100mm _,D 5mm - 25mm S,R
MODEL LS LE LH LS
42,0(1.654") SQ.
"B" "C" "D"
PUSH 8,04 cm² (1.25 in² ) PULL 6,91 cm² (1.07 in² )
4,4 (.173")
31,5 (1.240")
Standard Threads "EM" Option G1/8 PORT 1/8-27 M6X1,0 1/4-20 M6X1,0 1/4-20
PISTON AREA
"A" 22,5(0.89") 27,5(1.08") 32,5(1.28") 37,5(1.48")
5,0 (.197")
5,25(.207")
TYPE D 5,0(.197") + STK.
"A" + STROKE
Rear Mount Cylinder "MR"W
8,4(.331") (2 PLACES)
5,25(.207")
Y
7,1(.280") 31,5(1.240")
Z
X
W
Z
Mount Both End Cylinder "MB"
X
W
Z
Y
12,0(Ø.472") ROD "C" TAP
X
"B" PORT (2 PLACES)
"D" TAP X 15,2(.60") DP (2 PLACES)
Y
Non Magnetic Thru Mount Cylinder "MT" MODEL LS LE LH LS
TYPE STANDARD STROKES 10mm - 25mm _,D _ 5mm - 20mm _,D 5mm - 15mm S,R 5mm - 10mm
"A" 22,5(0.89") 27,5(1.08") 32,5(1.28") 37,5(1.48")
42,0(1.654") SQ.
PISTON AREA "B" "C"
PUSH 8,04 cm² (1.25 in² ) PULL 6,91 cm² (1.07 in² )
4,4 (.173")
31,5 (1.240")
5,0 (.197")
"A" + STROKE
TYPE D 5,0(.197") + STK.
8,4(.331") (2 PLACES)
5,25(.207") 5,25(.207")
Standard Threads "EM" Option G1/8 PORT 1/8-27 M6X1,0 1/4-20
W
7,1(.280") 31,5(1.240")
Z
X
5,2(Ø.204") DRILL THRU (2 PLACES) 8,7(Ø.343") C'BORE X 5,5(.217") DP (4 PLACES, 2 PER FACE)
Y
12,0(Ø.472") ROD "C" TAP
32 MODEL
BORE
"B" PORT (2 PLACES)
x STROKE
TYPE
MOUNTING
LS LE LH
OPTIONS
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD S - SINGLE ACTING, SPRING RETRACT R - SINGLE ACTING, SPRING EXTEND MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58) PR - REAR PIVOT PL - LONG PIVOT (FOR PIVOTS SEE PAGE 60)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
27
32mm (1-1/4") Bore Magnetic Front Mount Cylinder "MF" TYPE STANDARD STROKES _,D 10mm - 100mm _ 5mm - 100mm _,D 5mm - 100mm 5mm - 25mm S,R
MODEL LS LE LH LS
"A" 27,5(1.08") 32,5(1.28") 37,5(1.48") 42,5(1.68")
42,0(1.654") SQ.
5,25(.207")
"B" "C" "D"
PUSH 8,04 cm² (1.25 in² ) PULL 6,91 cm² (1.07 in² )
4,4 (.173")
31,5 (1.240")
5,25(.207")
PISTON AREA
TYPE D 5,0(.197") + STK.
"A" + STROKE
5,0 (.197")
Standard Threads "EM" Option G1/8 PORT 1/8-27 M6X1,0 1/4-20 M6X1,0 1/4-20
Rear Mount Cylinder "MR"W
8,4(.331") (2 PLACES)
31,5(1.240")
Y
7,1(.280") X
Z
Y
12,0(Ø.472") ROD "C" TAP
Z
X
W
Mount Both End Cylinder "MB" W
SENSOR MOUNTING TRACK (2 PLACES)
Z
"B" PORT (2 PLACES)
"D" TAP X 15,2(.60") DP (2 PLACES)
X
Y
Magnetic Thru Mount Cylinder "MT" TYPE STANDARD STROKES _,D 10mm - 20mm _ 5mm - 15mm _,D 5mm - 10mm 5mm S,R
MODEL LS LE LH LS
"A" 27,5(1.08") 32,5(1.28") 37,5(1.48") 42,5(1.68")
42,0(1.654") SQ.
5,25(.207")
32
X
5,0 (.197")
BORE
SENSOR MOUNTING TRACK (2 PLACES)
"A" + STROKE
TYPE D 5,0(.197") + STK.
7,1(.280")
5,2(Ø.204") DRILL THRU (2 PLACES) 8,7(Ø.343") C'BORE X 5,5(.217") DP (4 PLACES, 2 PER FACE)
Y
x
M STROKE
TYPE
MOUNTING
MAGNETIC
OPTIONS
"B" PORT (2 PLACES)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54)
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE)
BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD S - SINGLE ACTING, SPRING RETRACT R - SINGLE ACTING, SPRING EXTEND MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58)
28
PULL 6,91 cm² (1.07 in² )
8,4(.331") (2 PLACES)
Z
12,0(Ø.472") ROD "C" TAP
LS LE LH
Standard Threads "EM" Option G1/8 PORT 1/8-27 M6X1,0 1/4-20
W
31,5(1.240")
MODEL
"B" "C"
PUSH 8,04 cm² (1.25 in² )
4,4 (.173")
31,5 (1.240")
5,25(.207")
PISTON AREA
PR - REAR PIVOT PL - LONG PIVOT (FOR PIVOTS SEE PAGE 60)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
32mm (1-1/4") Bore
Magnetic Side Mount Cylinder "MS" MODEL LS LE LH
TYPE STANDARD STROKES "A" _,D 27,5(1.08") 10mm - 15mm 32,5(1.28") _ 5mm - 10mm 37,5(1.48") _,D 5mm
TYPE D 5,0(.197") + STK.
"A" + STROKE
5,0 (.197")
PISTON AREA
PULL 6,91 cm² (1.07 in² )
12,0(.472") 5,25(.207")
Y
X
31,5 (1.240")
Z
W
"B" PORT (2 PLACES)
8,4(.331") (2 PLACES)
Standard Threads "EM" Option G1/8 PORT 1/8-27 M6X1,0 1/4-20 M5X0,8 #10-32
42,0(1.654") SQ.
4,4 (.173")
SENSOR MOUNTING TRACK (2 PLACES)
7,1(.280")
"B" "C" "D"
PUSH 8,04 cm² (1.25 in² )
"D" TAP X 8,5(.33") DP (2 PLACES)
12,0(Ø.472") ROD "C" TAP
Magnetic Side Mount Cylinder "MS" MODEL LS LE LH LS
TYPE STANDARD STROKES 20mm - 100mm _,D _ 15mm - 100mm _,D 10mm - 100mm S,R 5mm - 25mm
TYPE D 5,0 (.197") + STK.
"A" 27,5(1.08") 32,5(1.28") 37,5(1.48") 42,5(1.68")
PISTON AREA
PULL 6,91 cm² (1.07 in² )
12,0(.472")
42,0(1.654") SQ.
4,4 (.173")
12,0(.472") 5,25(.207")
Y
X
32 MODEL
LS LE LH
BORE
12,0(Ø.472") ROD "C" TAP
x
31,5(1.240")
Z
W
"B" PORT (2 PLACES)
8,4(.331") (2 PLACES)
SENSOR MOUNTING TRACK (2 PLACES)
M STROKE
Standard Threads "EM" Option G1/8 PORT 1/8-27 M6X1,0 1/4-20 M5X0,8 #10-32
5,0 (.197")
"A" + STROKE
7,1(.280")
"B" "C" "D"
PUSH 8,04 cm² (1.25 in² )
TYPE
MOUNTING
MAGNETIC
OPTIONS
"D" TAP X 8,5(.33") DP (4 PLACES)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54)
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE)
BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD S - SINGLE ACTING, SPRING RETRACT R - SINGLE ACTING, SPRING EXTEND MS - SIDE MOUNT FE - FLANGE ON END FS - FLANGE ON SIDE (SEE PAGE 59)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
29
32mm (1-1/4") Bore
Non Magnetic Side Mount Cylinder "MS" TYPE STANDARD STROKES _,D 10mm - 20mm _ 5mm - 15mm _,D 5mm - 10mm 5mm S,R
MODEL LS LE LH LS TYPE D 5,0(.197") + STK.
"A" + STROKE
"A" 22,5(0.89") 27,5(1.08") 32,5(1.28") 37,5(1.48")
5,0 (.197")
"B" "C" "D"
PUSH 8,04 cm² (1.25 in² ) PULL 6,91 cm² (1.07 in² )
12,0(.472")
42,0(1.654") SQ.
4,4 (.173")
5,25 (.207")
Y
X
7,1(.280")
31,5 (1.240")
Z
W
"B" PORT (2 PLACES)
8,4(.331") (2 PLACES)
Standard Threads "EM" Option G1/8 PORT 1/8-27 M6X1,0 1/4-20 M5X0,8 #10-32
PISTON AREA
"D" TAP X 8,5(.33") DP (2 PLACES)
12,0(Ø.472") ROD "C" TAP
Non Magnetic Side Mount Cylinder "MS" MODEL LS LE LH LS
TYPE STANDARD STROKES 25mm - 100mm _,D _ 20mm - 100mm _,D 15mm - 100mm S,R 10mm - 25mm
TYPE D 5,0 (.197") + STK.
"A" 22,5(0.89") 27,5(1.08") 32,5(1.28") 37,5(1.48")
"A" + STROKE
PISTON AREA
PULL 6,91 cm² (1.07 in² )
12,0(.472")
42,0(1.654") SQ.
12,0(.472") 5,25(.207")
Y
X
32 MODEL
31,5(1.240")
"D" TAP X 8,5(.33") DP (4 PLACES)
12,0(Ø.472") ROD "C" TAP
x
BORE
STROKE
TYPE
LS LE LH
MOUNTING
OPTIONS
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD S - SINGLE ACTING, SPRING RETRACT R - SINGLE ACTING, SPRING EXTEND MS - SIDE MOUNT FE - FLANGE ON END FS - FLANGE ON SIDE (SEE PAGE 59)
30
Z
W
"B" PORT (2 PLACES)
8,4(.331") (2 PLACES)
Standard Threads "EM" Option G1/8 PORT 1/8-27 M6X1,0 1/4-20 M5X0,8 #10-32
5,0 (.197") 4,4 (.173")
7,1(.280")
"B" "C" "D"
PUSH 8,04 cm² (1.25 in² )
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
40mm (1-1/2") Bore
Non Magnetic Front Mount Cylinder "MF" MODEL LS LE LH LH
TYPE STANDARD STROKES 10mm - 100mm _,D _ 5mm - 100mm _ 5mm - 100mm D 5mm - 100mm
PISTON AREA "A" 25,0(0.98") ² ² 35,0(1.38") PUSH 12,56 cm (1.95 in ) 40,0(1.58") PULL 10,55 cm² (1.64 in² ) 45,0(1.78")
50,0(1.969") SQ.
3,6 (.142")
38,0 (1.496")
Standard Threads "EM" Option G1/8 PORT 1/8-27 M8X1,25 5/16-18 M6X1,0 1/4-20 TYPE D 5,0(.197") + STK.
"A" + STROKE
Rear Mount Cylinder "MR" W
9,9(.390") (2 PLACES)
6,0(.236") 6,0(.236")
5,0 (.197")
"B" "C" "D"
Y
8,7(.343") 38,0(1.496")
Z
X
W
Z
Mount Both End Cylinder "MB"
X
W
Z
"D" TAP X 15,2(.60") DP (2 PLACES)
Y
16,0(Ø.630") ROD "C" TAP
"B" PORTS (2 PLACES)
X
Y
Non Magnetic Thru Mount Cylinder "MT" MODEL LS LE LH LH
TYPE STANDARD STROKES 10mm - 25mm _,D _ 5mm - 15mm _ 5mm - 10mm D 5mm
PISTON AREA "A" 25,0(0.98") ² ² 35,0(1.38") PUSH 12,56 cm (1.95 in ) 40,0(1.58") PULL 10,55 cm² (1.64 in² ) 45,0(1.78")
50,0(1.969") SQ.
3,6 (.142")
38,0 (1.496")
5,0 (.197")
Standard Threads "EM" Option G1/8 PORT 1/8-27 M8X1,25 5/16-18
"A" + STROKE
TYPE D 5,0(.197") + STK.
9,9(.390") (2 PLACES)
6,0(.236") 6,0(.236")
"B" "C"
W
8,7(.343") 38,0(1.496")
Z
X
Y
5,2(Ø.204") DRILL THRU (2 PLACES) 8,7(Ø.343") C'BORE X 5,5(.217") DP (4 PLACES, 2 PER FACE)
16,0(Ø.630") ROD "C" TAP
40 MODEL
BORE
"B" PORTS (2 PLACES)
x STROKE
TYPE
MOUNTING
LS LE LH
OPTIONS
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE)
BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58) PR - REAR PIVOT PL - LONG PIVOT (FOR PIVOTS SEE PAGE 60)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
31
40mm (1-1/2") Bore Magnetic Front Mount Cylinder "MF" TYPE STANDARD STROKES 10mm - 100mm _,D _ 5mm - 100mm _ 5mm - 100mm D 5mm - 100mm
MODEL LS LE LH LH
PISTON AREA "A" 30,0(1.18") ² ² 40,0(1.58") PUSH 12,56 cm (1.95 in ) 45,0(1.78") PULL 10,55 cm² (1.64 in² ) 50,0(1.98")
50,0(1.969") SQ.
3,6 (.142")
38,0 (1.496")
6,0(.236") 6,0(.236")
5,0 (.197")
"B" "C" "D"
Standard Threads "EM" Option G1/8 PORT 1/8-27 M8X1,25 5/16-18 M6X1,0 1/4-20 TYPE D 5,0(.197") + STK.
"A" + STROKE
Rear Mount Cylinder "MR" W
9,9(.390") (2 PLACES)
Y
8,7(.343") 38,0(1.496")
Z
X
Y
16,0(Ø.630") ROD "C" TAP
Z
X
W
Mount Both End Cylinder "MB" W
SENSOR MOUNTING TRACK (2 PLACES)
Z
"B" PORTS (2 PLACES)
"D" TAP X 15,2(.60") DP (2 PLACES)
X
Y
Magnetic Thru Mount Cylinder "MT" MODEL LS LE LH
PISTON AREA TYPE STANDARD STROKES "A" 30,0(1.18") PUSH 12,56 cm² (1.95 in² ) 10mm - 20mm _,D 40,0(1.58") _ 5mm - 10mm ² ² 45,0(1.78") PULL 10,55 cm (1.64 in ) _ 5mm 50,0(1.969") SQ.
6,0(.236") 6,0(.236")
40 BORE
X
Y
SENSOR MOUNTING TRACK (2 PLACES)
TYPE D 5,0(.197") + STK.
8,7(.343")
5,2(Ø.204") DRILL THRU (2 PLACES) 8,7(Ø.343") C'BORE X 5,5(.217") DP (4 PLACES, 2 PER FACE)
x
M STROKE
TYPE
MOUNTING
MAGNETIC
OPTIONS
"B" PORTS (2 PLACES)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54)
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE)
BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58)
32
"A" + STROKE
9,9(.390") (2 PLACES)
Z
16,0(Ø.630") ROD "C" TAP
LS LE LH
Standard Threads "EM" Option G1/8 PORT 1/8-27 M8X1,25 5/16-18
W
38,0(1.496")
MODEL
5,0 (.197")
3,6 (.142")
38,0 (1.496")
"B" "C"
PR - REAR PIVOT PL - LONG PIVOT (FOR PIVOTS SEE PAGE 60)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
40mm (1-1/2") Bore Magnetic Side Mount Cylinder "MS" MODEL LS LE
TYPE STANDARD STROKES "A" 30,0(1.18") _,D 10mm - 15mm 40,0(1.58") _ 5mm
TYPE D 5,0(.197") + STK.
3,6 (.142")
"A" + STROKE
Standard Threads "EM" Option G1/8 PORT 1/8-27 M8X1,25 5/16-18 M6X1,0 1/4-20
12,0(.472") 6,0 (.236")
Y
X
38,0(1.496")
Z
W
"B" PORT (2 PLACES)
9,9(.390) (2 PLACES)
"B" "C" "D"
50,0(1.969") SQ.
5,0 (.197") SENSOR MOUNTING TRACK (2 PLACES)
8,7(.343")
PISTON AREA
PUSH 12,56 cm² (1.95 in² ) PULL 10,55 cm² (1.64 in² )
16,0(Ø.630") ROD "C" TAP
"D" TAP X 9,5(.37") DP (2 PLACES)
Magnetic Side Mount Cylinder "MS" MODEL LS LE LH LH
TYPE STANDARD STROKES 20mm - 100mm _,D _ 5mm - 100mm _ 5mm - 100mm D 5mm - 100mm
PISTON AREA "A" 30,0(1.18") ² ² 40,0(1.58") PUSH 12,56 cm (1.95 in ) 45,0(1.78") PULL 10,55 cm² (1.64 in² ) 50,0(1.98") 3,6 (.142")
TYPE D 5,0 (.197") + STK.
X
MODEL
LS LE LH
6,0(.236")
BORE
Z
W
"B" PORT (2 PLACES)
40
16,0(Ø.630") ROD "C" TAP
x
38,0(1.496")
SENSOR MOUNTING TRACK (2 PLACES)
TYPE
MOUNTING
MAGNETIC
"D" TAP X 9,5(.37") DP (4 PLACES)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54)
M STROKE
12,0(.472")
12,0(.472") Y
9,9(.390) (2 PLACES)
Standard Threads "EM" Option G1/8 PORT 1/8-27 M8X1,25 5/16-18 M6X1,0 1/4-20
50,0(1.969") SQ.
5,0 (.197")
"A" + STROKE
8,7(.343")
"B" "C" "D"
OPTIONS
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE)
BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MS - SIDE MOUNT FE - FLANGE ON END FS - FLANGE ON SIDE (SEE PAGE 59)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
33
40mm (1-1/2") Bore Non Magnetic Side Mount Cylinder "MS" PISTON AREA TYPE STANDARD STROKES "A" _,D 10mm - 20mm 25,0(0.98") PUSH 12,56 cm² (1.95 in² ) 35,0(1.38") _ 5mm - 10mm 40,0(1.58") PULL 10,55 cm² (1.64 in² ) _ 5mm
MODEL LS LE LH TYPE D 5,0(.197") + STK.
3,6 (.142")
"A" + STROKE
"B" "C" "D"
50,0(1.969") SQ.
5,0 (.197")
12,0(.472") 6,0(.236")
Y
X
8,7(.343")
38,0(1.496")
Z
W
"B" PORT (2 PLACES)
9,9(.390)
Standard Threads "EM" Option G1/8 PORT 1/8-27 M8X1,25 5/16-18 M6X1,0 1/4-20
16,0(Ø.630") ROD "C" TAP
"D" TAP X 9,5(.37") DP (2 PLACES)
Non Magnetic Side Mount Cylinder "MS" MODEL LS LE LH LH
TYPE STANDARD STROKES 25mm - 100mm _,D _ 15mm - 100mm _ 10mm - 100mm D 5mm - 100mm
TYPE D 5,0 (.197") + STK.
PISTON AREA "A" 25,0(0.98") ² ² 35,0(1.38") PUSH 12,56 cm (1.95 in ) 40,0(1.58") PULL 10,55 cm² (1.64 in² ) 45,0(1.78") 3,6 (.142")
6,0(.236")
X
40 MODEL
LS LE LH
38,0(1.496")
"D" TAP X 9,5(.37") DP (4 PLACES)
16,0(Ø.630") ROD "C" TAP
x
BORE
STROKE
TYPE
MOUNTING
OPTIONS
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MS - SIDE MOUNT FE - FLANGE ON END FS - FLANGE ON SIDE (SEE PAGE 59)
34
Z
W
"B" PORT (2 PLACES)
12,0(.472")
12,0(.472") Y
9,9(.390) (2 PLACES)
Standard Threads "EM" Option G1/8 PORT 1/8-27 M8X1,25 5/16-18 M6X1,0 1/4-20
50,0(1.969") SQ.
5,0 (.197")
"A" + STROKE
8,7(.343")
"B" "C" "D"
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
50mm (2.0") Bore
Non Magnetic Front Mount Cylinder "MF" MODEL LS LE LH LH
TYPE STANDARD STROKES _,D 10mm - 100mm _ 5mm - 100mm _ 5mm - 100mm D 5mm - 100mm
PISTON AREA "A" 28,5(1.12") ² ² 38,5(1.52") PUSH 19,63 cm (3.04 in ) 43,5(1.72") PULL 17,62 cm² (2.73 in² ) 48,5(1.91")
63,0(2.48") SQ. 5,0 (.197")
50,0 (1.968")
Standard Threads "EM" Option G1/8 PORT 1/8-27 M10X1,5 3/8-24 M8X1,25 5/16-18 TYPE D 5,0(.197") + STK.
"A" + STROKE
Rear Mount Cylinder "MR"
10,9(.430") (2 PLACES)
6,5(.256") 6,5(.256")
"B" "C" "D"
W
Z
Y
Mount Both End Cylinder "MB"
X
W
Z
16,0(Ø.630") ROD "C" TAP
Z
X
8,7(.343") 50,0(1.968")
W
Y
"D" TAP X 20,3(.80") DP (2 PLACES)
X
"B" PORTS (2 PLACES)
Y
Non Magnetic Thru Mount Cylinder "MT" MODEL LS LE LH LH
TYPE STANDARD STROKES 10mm - 40mm _,D _ 5mm - 30mm _ 5mm - 25mm D 5mm - 20mm
PISTON AREA "A" 28,5(1.12") PUSH 19,63 cm² (3.04 in² ) 38,5(1.52") 43,5(1.72") PULL 17,62 cm² (2.73 in² ) 48,5(1.91")
"B" "C"
63,0(2.48") SQ. 5,0 (.197")
50,0 (1.968")
"A" + STROKE
TYPE D 5,0(.197") + STK.
10,9(.430") (2 PLACES)
6,5(.256") 6,5(.256")
Standard Threads "EM" Option G1/8 PORT 1/8-27 M10X1,5 3/8-24
W
8,7(.343") 50,0(1.968")
Z
X
50 MODEL
BORE
6,8(Ø.268") DRILL THRU (2 PLACES) 10,3(Ø.406") C'BORE X 6,9(.27") DP (4 PLACES, 2 PER FACE)
Y
16,0(Ø.630") ROD "C" TAP
"B" PORTS (2 PLACES)
x STROKE
TYPE
MOUNTING
LS LE LH
OPTIONS
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58) PR - REAR PIVOT PL - LONG PIVOT (FOR PIVOTS SEE PAGE 60)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
35
50mm (2.0") Bore Magnetic Front Mount Cylinder "MF" TYPE STANDARD STROKES _,D 10mm - 100mm _ 5mm - 100mm _ 5mm - 100mm D 5mm - 100mm
MODEL LS LE LH LH
PISTON AREA "A" 33,5(1.32") PUSH 19,63 cm² (3.04 in² ) 43,5(1.72") 48,5(1.91") PULL 17,62 cm² (2.73 in² ) 53,5(2.11")
63,0(2.48") SQ.
5,0 (.197")
50,0 (1.968")
6,5(.256") 6,5(.256")
"B" "C" "D"
Standard Threads "EM" Option G1/8 PORT 1/8-27 M10X1,5 3/8-24 M8X1,25 5/16-18 TYPE D 5,0(.197") + STK.
"A" + STROKE
Rear Mount Cylinder "MR"
10,9(.430") (2 PLACES)
W
Z
X
Y
Mount Both End Cylinder "MB" W
SENSOR MOUNTING TRACK (2 PLACES)
Y
16,0(Ø.630") ROD "C" TAP
Z
"B" PORTS (2 PLACES)
"D" TAP X 20,3(.80") DP (2 PLACES)
Magnetic Thru Mount Cylinder "MT" TYPE STANDARD STROKES _,D 10mm - 35mm _ 5mm - 25mm _ 5mm - 20mm D 5mm - 15mm
MODEL LS LE LH LH
PISTON AREA "A" 33,5(1.32") ² ² 43,5(1.72") PUSH 19,63 cm (3.04 in ) 48,5(1.91") PULL 17,62 cm² (2.73 in² ) 53,5(2.11")
63,0(2.48") SQ.
6,5(.256")
"B" "C"
5,0 (.197")
50,0 (1.968")
6,5(.256")
Z
X
8,7(.343") 50,0(1.968")
W
SENSOR MOUNTING TRACK (2 PLACES)
W
X
Y
Standard Threads "EM" Option G1/8 PORT 1/8-27 M10X1,5 3/8-24 "A" + STROKE
TYPE D 5,0(.197") + STK.
10,9(.430") (2 PLACES)
8,7(.343") 50,0(1.968")
Z
X
16,0(Ø.630") ROD "C" TAP
50 MODEL
LS LE LH
BORE
6,8(Ø.268") DRILL THRU (2 PLACES) 10,3(Ø.406") C'BORE X 6,9(.27") DP (4 PLACES, 2 PER FACE)
Y
x
M STROKE
TYPE
MOUNTING
OPTIONS
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54)
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE)
BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58) PR - REAR PIVOT PL - LONG PIVOT (FOR PIVOTS SEE PAGE 60)
36
MAGNETIC
"B" PORTS (2 PLACES)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
50mm (2.0") Bore Magnetic Side Mount Cylinder "MS" MODEL LS
PISTON AREA TYPE STANDARD STROKES "A" 10mm - 15mm _,D 33,5(1.32") PUSH 19,63 cm² (3.04 in² )
LE
_
"B" "C" "D"
43,5(1.72") PULL 17,62 cm² (2.73 in² )
5mm
TYPE D 5,0(.197") + STK.
Standard Threads "EM" Option G1/8 PORT 1/8-27 M10X1,5 3/8-24 M8X1,25 5/16-18
"A" + STROKE 5,0 (.197")
12,0(.472")
63,0(2.48") SQ.
6,5(.256")
Y
SENSOR MOUNTING TRACK (2 PLACES)
X
50,0 (1.968")
Z
W
8,7(.343")
"B" PORT (2 PLACES)
10,9(.430") (2 PLACES)
16,0(Ø.630") ROD "C" TAP
"D" TAP X 12,0(.47") DP (4 PLACES)
Magnetic Side Mount Cylinder "MS" MODEL LS LE LH LH
TYPE STANDARD STROKES _,D 20mm - 100mm _ 10mm - 100mm _ 5mm - 100mm D 5mm - 100mm
TYPE D 5,0(.197") + STK.
PISTON AREA "A" 33,5(1.32") PUSH 19,63 cm² (3.04 in² ) 43,5(1.72") 48,5(1.91") PULL 17,62 cm² (2.73 in² ) 53,5(2.11")
"B" "C" "D"
"A" + STROKE
12,0(.472") 5,0 (.197")
12,0(.472")
63,0(2.48") SQ.
6,5(.256")
Y
SENSOR MOUNTING TRACK (2 PLACES)
8,7(.343")
50 LS LE LH
X
BORE
Z
16,0(Ø.630") ROD "C" TAP
x
M STROKE
TYPE
50,0 (1.968")
W
"B" PORT (2 PLACES)
10,9(.430") (2 PLACES)
MODEL
Standard Threads "EM" Option G1/8 PORT 1/8-27 M10X1,5 3/8-24 M8X1,25 5/16-18
MOUNTING
MAGNETIC
OPTIONS
"D" TAP X 12,0(.47") DP (4 PLACES)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54)
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE)
BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MS - SIDE MOUNT FE - FLANGE ON END FS - FLANGE ON SIDE (SEE PAGE 59)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
37
50mm (2.0") Bore Non Magnetic Side Mount Cylinder "MS" MODEL LS LE LH
PISTON AREA TYPE STANDARD STROKES "A" _,D 10mm - 20mm 28,5(1.12") PUSH 19,63 cm² (3.04 in² ) 38,5(1.52") _ 5mm - 10mm ² ² 43,5(1.72") PULL 17,62 cm (2.73 in ) _ 5mm
TYPE D 5,0(.197") + STK.
"B" "C" "D"
Standard Threads "EM" Option G1/8 PORT 1/8-27 M10X1,5 3/8-24 M8X1,25 5/16-18
"A" + STROKE 5,0 (.197")
12,0(.472")
63,0(2.48") SQ.
6,5(.256")
Y
X
8,7(.343")
W
"B" PORT (2 PLACES)
10,9(.430") (2 PLACES)
50,0 (1.968")
Z
16,0(Ø.630") ROD "C" TAP
"D" TAP X 12,0(.47") DP (2 PLACES)
Non Magnetic Side Mount Cylinder "MS" MODEL LS LE LH LH
TYPE STANDARD STROKES _,D 25mm - 100mm _ 15mm - 100mm _ 10mm - 100mm 5mm - 100mm D
TYPE D 5,0(.197") + STK.
PISTON AREA "A" 28,5(1.12") ² ² 38,5(1.52") PUSH 19,63 cm (3.04 in ) 43,5(1.72") PULL 17,62 cm² (2.73 in² ) 48,5(1.91")
"A" + STROKE
5,0 (.197")
X
"B" PORT (2 PLACES)
10,9(.430") (2 PLACES)
50
6,5(.256")
Z
50,0 (1.968")
16,0(Ø.630") ROD "C" TAP
"D" TAP X 12,0(.47") DP (4 PLACES)
x
BORE
STROKE
TYPE
MOUNTING
OPTIONS
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MS - SIDE MOUNT FE - FLANGE ON END FS - FLANGE ON SIDE (SEE PAGE 59)
38
12,0(.472")
W
8,7(.343")
LS LE LH
Standard Threads "EM" Option 1/8-27 G1/8 PORT M10X1,5 3/8-24 M8X1,25 5/16-18
12,0(.472")
63,0(2.48") SQ. Y
MODEL
"B" "C" "D"
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
63mm (2-1/2") Bore
Non Magnetic Front Mount Cylinder "MF" MODEL LS LE LH
PISTON AREA TYPE STANDARD STROKES "A" _,D 10mm - 100mm 32,0(1.26") PUSH 31,17 cm² (4.83 in² ) 42,0(1.66") _ 5mm - 100mm 52,0(2.05") PULL 28,03 cm² (4.34 in² ) _,D 5mm - 100mm 76,0(2.992") SQ.
8,0(.315")
Rear Mount Cylinder "MR" W
11,7(.46")
W
22,0 (.866")
20,6(.81") 60,0 (2.362")
TYPE D 5,0(.197") + STK.
12,7(.50") (2 PLACES)
60,0 (2.362")
8,0(.315")
Standard Threads "EM" Option G1/8 PORT 1/8-27 M12X1,75 1/2-13 M10X1,5 3/8-24
"A" + STROKE
5,0 (.197")
6,0(.236")
"B" "C" "D"
Z
X
Y
Z
X
Mount Both End Cylinder "MB" W
Z
Y
20,0(Ø.787") ROD "C" TAP
"D" TAP X 23,9(.94") DP (4 PLACES)
X
"B" PORTS (2 PLACES) Y
Non Magnetic Thru Mount Cylinder "MT" MODEL LS LE LH
PISTON AREA TYPE STANDARD STROKES "A" _,D 10mm - 40mm 32,0(1.26") PUSH 31,17 cm² (4.83 in² ) 42,0(1.66") _ 5mm - 30mm 52,0(2.05") PULL 28,03 cm² (4.34 in² ) _,D 5mm - 20mm 76,0(2.992") SQ.
8,0(.315")
6,0(.236")
Z
22,0 (.866")
X
Y
20,0(Ø.787") ROD "C" TAP
63 BORE
TYPE D 5,0(.197") + STK.
11,7(.46")
20,6(.81")
MODEL
"A" + STROKE
12,7(.50") (2 PLACES)
W
60,0 (2.362")
Standard Threads "EM" Option 1/8-27 G1/8 PORT M12X1,75 1/2-13
5,0 (.197")
60,0 (2.362")
8,0(.315")
"B" "C"
8,5(Ø.335") DRILL THRU (4 PLACES) 13,5(Ø.53") C'BORE X 8,4(.33") DP (8 PLACES, 4 PER FACE)
"B" PORTS (2 PLACES)
x STROKE
TYPE
LS LE LH
MOUNTING
OPTIONS
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58) PR - REAR PIVOT PL - LONG PIVOT (FOR PIVOTS SEE PAGE 60)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
39
63mm (2-1/2") Bore Magnetic Front Mount Cylinder "MF" MODEL LS LE LH
PISTON AREA TYPE STANDARD STROKES "A" _,D 10mm - 100mm 37,0(1.46") PUSH 31,17 cm² (4.83 in² ) 47,0(1.85") _ 5mm - 100mm 57,0(2.25") PULL 28,03 cm² (4.34 in² ) _,D 5mm - 100mm 76,0(2.992") SQ. 60,0 (2.362")
8,0(.315") 8,0(.315")
Z
Rear Mount Cylinder "MR" W
22,0 (.866")
20,6(.81") 60,0 (2.362")
TYPE D 5,0(.197") + STK.
12,7(.50") (2 PLACES)
11,7 (.46")
W
Standard Threads "EM" Option G1/8 PORT 1/8-27 M12X1,75 1/2-13 M10X1,5 3/8-24
"A" + STROKE
5,0 (.197")
6,0(.236")
"B" "C" "D"
Y
X
Mount Both End Cylinder "MB" W
SENSOR TRACK (2 PLACES) 20,0(Ø.787") ROD "C" TAP
Z
"D" TAP X 23,9(.94") DP (4 PLACES)
Y
Y
PISTON AREA TYPE STANDARD STROKES "A" 37,0(1.46") PUSH 31,17 cm² (4.83 in² ) _,D 10mm - 35mm 47,0(1.85") _ 5mm - 25mm 57,0(2.25") PULL 28,03 cm² (4.34 in² ) _,D 5mm - 15mm 76,0(2.992") SQ.
8,0(.315")
6,0(.236")
Standard Threads "EM" Option 1/8-27 G1/8 PORT M12X1,75 1/2-13 "A" + STROKE
12,7(.50") (2 PLACES)
TYPE D 5,0(.197") + STK.
11,7(.46")
W
22,0 (.866")
20,6(.81") 60,0 (2.362")
"B" "C"
5,0 (.197")
60,0 (2.362")
8,0(.315")
X
"B" PORTS (2 PLACES)
Magnetic Thru Mount Cylinder "MT" MODEL LS LE LH
Z
X
Z
X
SENSOR TRACK (2 PLACES) 20,0(Ø.787") ROD "C" TAP
63 MODEL
LS LE LH
BORE
8,5(Ø.335") DRILL THRU (4 PLACES) 13,5(Ø.53") C'BORE X 8,4(.33") DP (8 PLACES, 4 PER FACE)
Y
x
M STROKE
TYPE
MOUNTING
OPTIONS
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54)
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE)
BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58) PR - REAR PIVOT PL - LONG PIVOT (FOR PIVOTS SEE PAGE 60)
40
MAGNETIC
"B" PORTS (2 PLACES)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
63mm (2-1/2") Bore Magnetic Side Mount Cylinder "MS" PISTON AREA TYPE STANDARD STROKES "A" _,D 37,0(1.46") PUSH 31,17 cm² (4.83 in² ) 10mm - 15mm
MODEL LS LE
_
47,0(1.85") PULL 28,03 cm² (4.34 in² )
5mm
Standard Threads "EM" Option G1/8 PORT 1/8-27 M12X1,75 1/2-13 M8X1,25 5/16-18
"B" "C" "D"
"A" + STROKE
TYPE D 5,0(.197") + STK.
5,0 (.197")
12,0(.472")
76,0(2.992") SQ.
6,0(.236")
8,0 (.315")
Y
SENSOR TRACK (2 PLACES) X
60,0 (2.362")
Z
20,6(.81") 22,0(.866")
12,7(.50") (2 PLACES)
W
11,7(.46")
"B" PORT (2 PLACES)
20,0(Ø.787") ROD "C" TAP
"D" TAP 15,0(.59") DP (2 PLACES)
Magnetic Side Mount Cylinder "MS" MODEL LS LE LH
PISTON AREA TYPE STANDARD STROKES "A" 37,0(1.46") PUSH 31,17 cm² (4.83 in² ) _,D 20mm - 100mm 47,0(1.85") _ 10mm - 100mm 57,0(2.25") PULL 28,03 cm² (4.34 in² ) _,D 5mm - 100mm
"B" "C" "D"
Standard Threads "EM" Option G1/8 PORT 1/8-27 M12X1,75 1/2-13 M8X1,25 5/16-18
"A" + STROKE
TYPE D 5,0(.197") + STK.
6,0 (.236")
5,0 (.197")
12,0(.472")
12,0(.472")
76,0(2.992") SQ.
8,0 (.315")
Y
SENSOR TRACK (2 PLACES) X
Z
60,0 (2.362")
20,6(.81") 22,0(.866")
"B" PORT (2 PLACES)
12,7(.50") (2 PLACES)
63 MODEL
LS LE LH
BORE
W
11,7(.46")
x
20,0(Ø.787") ROD "C" TAP
M STROKE
TYPE
MOUNTING
MAGNETIC
OPTIONS
"D" TAP X 15,0(.59") DP (4 PLACES)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54)
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MS - SIDE MOUNT FE - FLANGE ON END FS - FLANGE ON SIDE (SEE PAGE 59)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
41
63mm (2-1/2") Bore
Non Magnetic Side Mount Cylinder "MS" MODEL LS
PISTON AREA TYPE STANDARD STROKES "A" _,D 32,0(1.26") PUSH 31,17 cm² (4.83 in² ) 10mm - 20mm
LE
_
5mm - 10mm
42,0(1.66") PULL 28,03 cm² (4.34 in² )
"B" "C" "D"
Standard Threads "EM" Option G1/8 PORT 1/8-27 M12X1,75 1/2-13 M8X1,25 5/16-18
"A" + STROKE
TYPE D 5,0(.197") + STK.
5,0 (.197")
12,0(.472")
76,0(2.992") SQ.
6,0(.236")
8,0 (.315")
Y
X
60,0 (2.362")
Z
20,6(.81") 22,0(.866")
12,7(.50") (2 PLACES)
W
11,7(.46")
"B" PORT (2 PLACES)
20,0(Ø.787") ROD "C" TAP
"D" TAP X 15,0(.59") DP (2 PLACES)
Non Magnetic Side Mount Cylinder "MS" MODEL LS LE LH
PISTON AREA TYPE STANDARD STROKES "A" _,D 32,0(1.26") 25mm - 100mm PUSH 31,17 cm² (4.83 in² ) 42,0(1.66") _ 15mm - 100mm 52,0(2.05") PULL 28,03 cm² (4.34 in² ) _,D 5mm - 100mm
"B" "C" "D"
Standard Threads "EM" Option 1/8-27 G1/8 PORT M12X1,75 1/2-13 M8X1,25 5/16-18
"A" + STROKE
TYPE D 5,0(.197") + STK.
12,0(.472") 6,0 (.236")
5,0 (.197")
12,0(.472")
76,0(2.992") SQ.
8,0 (.315")
Y
X
Z
60,0 (2.362")
20,6(.81") 22,0(.866")
"B" PORT (2 PLACES)
12,7(.50") (2 PLACES)
63 MODEL
11,7(.46")
"D" TAP X 15,0(.59") DP (4 PLACES)
x
BORE
STROKE
TYPE
LS LE LH
MOUNTING
OPTIONS
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MS - SIDE MOUNT FE - FLANGE ON END FS - FLANGE ON SIDE (SEE PAGE 59)
42
W
20,0(Ø.787") ROD "C" TAP
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
76mm (3.0") Bore Non Magnetic Front Mount Cylinder "MF" PISTON AREA TYPE STANDARD STROKES "A" _,D 10mm - 100mm 38,0(1.50") PUSH 45,6 cm² (7.07 in² ) 48,0(1.89") _ 5mm - 100mm 58,0(2.28") PULL 42,46 cm² (6.59 in² ) _,D 5mm - 100mm
MODEL LS LE LH
89,0(3.504") SQ.
5,0 (.197")
73,0 (2.874")
8,0(.315") 8,0(.315")
"B" "C" "D"
"A" + STROKE
Standard Threads "EM" Option G1/8 PORT 1/8-27 M12X1,75 1/2-13 M10X1,5 3/8-24
TYPE D 5,0(.197") + STK.
Rear Mount Cylinder "MR" W
14,2(.56") (2 PLACES)
W
Z
X
20,6(.81") Y
73,0 (2.874")
Mount Both End Cylinder "MB"
X
Z
W
X
Z Y
20,0(Ø.787") ROD "C" TAP
"B" PORTS (2 PLACES)
"D" TAP X 23,9(.94) DP (4 PLACES)
Y
Non Magnetic Thru Mount Cylinder "MT" PISTON AREA TYPE STANDARD STROKES "A" _,D 38,0(1.50") 10mm - 40mm PUSH 45,6 cm² (7.07 in² ) 48,0(1.89") _ 5mm - 30mm 58,0(2.28") PULL 42,46 cm² (6.59 in² ) _,D 5mm - 20mm
MODEL LS LE LH
"B" "C"
89,0(3.504") SQ.
5,0 (.197")
73,0 (2.874")
8,0(.315") 8,0(.315")
Standard Threads "EM" Option G1/8 PORT 1/8-27 M12X1,75 1/2-13 "A" + STROKE
TYPE D 5,0(.197") + STK.
14,2(.56") (2 PLACES)
W
20,6(.81") 73,0 (2.874")
X
Z
76 MODEL
LS LE LH
BORE
8,5(Ø.335") DRILL THRU (4 PLACES) 13,5(Ø.53") C'BORE X 8,4(.33") DP (8 PLACES, 4 PER FACE)
Y
20,0(Ø.787") ROD "C" TAP
"B" PORTS (2 PLACES)
x STROKE
TYPE
MOUNTING
OPTIONS
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58) PR - REAR PIVOT PL - LONG PIVOT (FOR PIVOTS SEE PAGE 60)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
43
76mm (3.0") Bore Magnetic Front Mount Cylinder "MF" PISTON AREA TYPE STANDARD STROKES "A" _,D 10mm - 100mm 43,0(1.69") PUSH 45,6 cm² (7.07 in² ) 53,0(2.09") _ 5mm - 100mm 63,0(2.48") PULL 42,46 cm² (6.59 in² ) _,D 5mm - 100mm
MODEL LS LE LH
89,0(3.504") SQ.
8,0(.315")
"A" + STROKE
5,0 (.197")
73,0 (2.874")
8,0(.315")
"B" "C" "D"
Standard Threads "EM" Option G1/8 PORT 1/8-27 M12X1,75 1/2-13 M10X1,5 3/8-24
TYPE D 5,0(.197") + STK.
Rear Mount Cylinder "MR" W
14,2(.56") (2 PLACES)
W
Z
X
20,6(.81") Y
73,0 (2.874")
X
Z
Mount Both End Cylinder "MB"
SENSOR MOUNTING TRACK (2 PLACES)
W
X
Z Y
20,0(Ø.787) ROD "C" TAP
"B" PORTS (2 PLACES)
"D" TAP X 23,9(.94) DP (4 PLACES)
Y
Magnetic Thru Mount Cylinder "MT" PISTON AREA TYPE STANDARD STROKES "A" _,D 43,0(1.69") 10mm - 35mm PUSH 45,6 cm² (7.07 in² ) 53,0(2.09") _ 5mm - 25mm 63,0(2.48") PULL 42,46 cm² (6.59 in² ) _,D 5mm - 15mm
MODEL LS LE LH
"B" "C"
89,0(3.504") SQ. 73,0 (2.874")
8,0(.315") 8,0(.315")
73,0 (2.874")
14,2(.56") (2 PLACES) SENSOR MOUNTING TRACK (2 PLACES)
BORE
20,6(.81")
8,5(Ø.335") DRILL THRU (4 PLACES) 13,5(Ø.53") C'BORE X 8,4(.33") DP (8 PLACES, 4 PER FACE)
Y
x
M STROKE
TYPE
MOUNTING
MAGNETIC
OPTIONS
"B" PORTS (2 PLACES) SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54)
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE)
BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58)
44
TYPE D 5,0(.197") + STK.
X
Z
76 LS LE LH
"A" + STROKE
W
20,0(Ø.787") ROD "C" TAP
MODEL
5,0 (.197")
Standard Threads "EM" Option G1/8 PORT 1/8-27 M12X1,75 1/2-13
PR - REAR PIVOT PL - LONG PIVOT (FOR PIVOTS SEE PAGE 60)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
76mm (3.0") Bore Magnetic Side Mount Cylinder "MS" MODEL LS LE
PISTON AREA TYPE STANDARD STROKES "A" _,D 10mm - 15mm 43,0(1.69") PUSH 45,6 cm² (7.07 in² ) _ 5mm 53,0(2.09") PULL 42,46 cm² (6.59 in² )
"B" "C" "D"
Standard Threads "EM" Option G1/8 PORT 1/8-27 M12X1,75 1/2-13 M10X1,5 3/8-24
"A" + STROKE
TYPE D 5,0(.197") + STK.
16,0(.630")
89,0(3.504") SQ.
5,0 (.197")
8,0 (.315")
Y
SENSOR MOUNTING TRACK (2 PLACES) X
73,0 (2.874")
Z
20,6(.81") W
"B" PORT (2 PLACES)
14,2(.56") (2 PLACES)
20,0(Ø.787") ROD "C" TAP
"D" TAP X 19,0(.75") DP (2 PLACES)
Magnetic Side Mount Cylinder "MS" MODEL LS LE LH
PISTON AREA TYPE STANDARD STROKES "A" _,D 43,0(1.69") 20mm - 100mm PUSH 45,6 cm² (7.07 in² ) 53,0(2.09") _ 10mm - 100mm 63,0(2.48") PULL 42,46 cm² (6.59 in² ) _,D 5mm - 100mm
TYPE D 5,0(.197") + STK.
"B" "C" "D"
Standard Threads "EM" Option 1/8-27 G1/8 PORT M12X1,75 1/2-13 M10X1,5 3/8-24
"A" + STROKE 5,0 (.197")
8,0(.315")
Y
SENSOR MOUNTING TRACK (2 PLACES)
16,0(.630")
16,0(.630")
89,0(3.504") SQ.
X
Z
73,0 (2.874")
20,6(.81") W
"B" PORT (2 PLACES)
14,2(.56") (2 PLACES)
76 MODEL
LS LE LH
BORE
20,0(Ø.787") ROD "C" TAP
x
M STROKE
TYPE
MOUNTING
MAGNETIC
OPTIONS
"D" TAP X 19,0(.75") DP (4 PLACES)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54)
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE)
BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MS - SIDE MOUNT FE - FLANGE ON END FS - FLANGE ON SIDE (SEE PAGE 59)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62) UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
45
76mm (3.0") Bore
Non Magnetic Side Mount Cylinder "MS" MODEL LS LE
PISTON AREA TYPE STANDARD STROKES "A" _,D 10mm - 20mm 38,0(1.50") PUSH 45,6 cm² (7.07 in² ) _ 48,0(1.89") PULL 42,46 cm² (6.59 in² ) 5mm - 10mm
"B" "C" "D"
Standard Threads "EM" Option G1/8 PORT 1/8-27 M12X1,75 1/2-13 M10X1,5 3/8-24
"A" + STROKE
TYPE D 5,0(.197") + STK.
16,0(.630")
89,0(3.504") SQ.
5,0 (.197")
8,0 (.315")
Y
X
73,0 (2.874")
Z
20,6(.81") W
"B" PORT (2 PLACES)
14,2(.56") (2 PLACES)
20,0(Ø.787") ROD "C" TAP
"D" TAP 19,0(.75") DP (2 PLACES)
Non Magnetic Side Mount Cylinder "MS" MODEL LS LE LH
PISTON AREA TYPE STANDARD STROKES "A" 38,0(1.50") _,D 25mm - 100mm PUSH 45,6 cm² (7.07 in² ) 48,0(1.89") _ 15mm - 100mm 58,0(2.28") PULL 42,46 cm² (6.59 in² ) _,D 5mm - 100mm
"B" "C" "D"
Standard Threads "EM" Option 1/8-27 G1/8 PORT M12X1,75 1/2-13 M10X1,5 3/8-24
"A" + STROKE
TYPE D 5,0(.197") + STK.
16,0(.630") 16,0(.630")
89,0(3.504") SQ.
5,0 (.197")
8,0(.315")
Y
X
Z
73,0 (2.874")
20,6(.81") W
"B" PORT (2 PLACES)
14,2(.56") (2 PLACES)
76 MODEL
20,0(Ø.787") ROD "C" TAP
"D" TAP X 19,0(.75") DP (4 PLACES)
x
BORE
STROKE
TYPE
LS LE LH
MOUNTING
OPTIONS
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MS - SIDE MOUNT FE - FLANGE ON END FS - FLANGE ON SIDE (SEE PAGE 59)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61) SH - HYDRAULIC OPTION (35 BAR 500 PSI) (SEE PAGE 62)
46
UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE PAGE 62)
101mm (4.0") Bore
Non Magnetic Front Mount Cylinder "MF" MODEL LS LE LH
PISTON AREA TYPE STANDARD STROKES "A" 41,5(1.63") _,D 10mm - 100mm PUSH 81,07 cm² (12.57 in² ) 51,5(2.03") _ 5mm - 100mm 61,5(2.42") PULL 77,93 cm² (12.09 in² ) 5mm - 100mm _,D 127,0(5.0") 5,0 (.197")
80,8(3.182") 40,4 (1.591")
"B" "C" "D"
Standard Threads "EM" Option G1/8 PORT 1/8-27 M12X1,75 1/2-13 M8X1,25 5/16-18
"A" + STROKE
TYPE D 5,0(.197") + STK.
16,5(.65") (2 PLACES)
Rear Mount Cylinder "MR" W
W Z
X
80,8 (3.182")
40,4 (1.591")
Y
X
Z
Mount Both End Cylinder "MB" W
Z
Y
20,0(Ø.787") ROD "C" TAP
"D" TAP X 19.8(.78") DP (4 PLACES)
"B" PORT (2 PLACES)
X
Y
Non Magnetic Thru Mount Cylinder "MT" MODEL LS LE LH
PISTON AREA TYPE STANDARD STROKES "A" _,D 10mm - 50mm 41,5(1.63") PUSH 81,07 cm² (12.57 in² ) 51,5(2.03") _ 5mm - 40mm 61,5(2.42") PULL 77,93 cm² (12.09 in² ) _,D 5mm - 30mm
"B" "C"
127,0(5.0") 5,0 (.197")
80,8(3.182") 40,4 (1.591")
Standard Threads "EM" Option 1/8-27 G1/8 PORT M12X1,75 1/2-13 "A" + STROKE
TYPE D 5,0(.197") + STK.
16,5(.65") (2 PLACES)
W
80,8 (3.182")
40,4 (1.591") X
Z
101 MODEL
8,5(Ø.335") DRILL THRU (4 PLACES)
Y
20,0(Ø.787") ROD "C" TAP
"B" PORT (2 PLACES)
x
BORE
STROKE
TYPE
MOUNTING
LS LE LH
OPTIONS
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61)
47
101mm (4.0") Bore Magnetic Front Mount Cylinder "MF" PISTON AREA TYPE STANDARD STROKES "A" _,D 10mm - 100mm 51,5(2.03") PUSH 81,07 cm² (12.57 in² ) 61,5(2.42") _ 5mm - 100mm 71,5(2.82") PULL 77,93 cm² (12.09 in² ) 5mm - 100mm _,D
MODEL LS LE LH
127,0(5.0") 5,0 (.197")
80,8(3.182") 40,4 (1.591")
SENSOR MOUNTING TRACK
"B" "C" "D"
Standard Threads "EM" Option 1/8-27 G1/8 PORT M12X1,75 1/2-13 M8X1,25 5/16-18
"A" + STROKE
TYPE D 5,0(.197") + STK.
Rear Mount Cylinder "MR"
16,5(.65") (2 PLACES)
W
W
Z
X
80,8 (3.182")
40,4 (1.591")
Y
X
Z
Mount Both End Cylinder "MB" W
Z
Y
20,0(Ø.787") ROD "C" TAP
"D" TAP X 19.8(.78") DP (4 PLACES)
"B" PORT (2 PLACES)
X
Y
Magnetic Thru Mount Cylinder "MT" MODEL LS LE LH
PISTON AREA TYPE STANDARD STROKES "A" _,D 51,5(2.03") 10mm - 40mm PUSH 81,07 cm² (12.57 in² ) 61,5(2.42") _ 5mm - 30mm 71,5(2.82") PULL 77,93 cm² (12.09 in² ) 5mm - 20mm _,D
"B" "C"
127,0(5.0") 5,0 (.197")
80,8(3.182") 40,4 (1.591")
SENSOR MOUNTING TRACK
80,8 (3.182")
X
Z
BORE
8,5(Ø.335") DRILL THRU (4 PLACES)
Y
x
M STROKE
TYPE
MOUNTING
MAGNETIC
OPTIONS
"B" PORT (2 PLACES)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54)
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE)
BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58)
48
TYPE D 5,0(.197") + STK.
40,4 (1.591")
101 LS LE LH
"A" + STROKE
16,5(.65") (2 PLACES)
W
20,0(Ø.787") ROD "C" TAP
MODEL
Standard Threads "EM" Option G1/8 PORT 1/8-27 M12X1,75 1/2-13
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61)
127mm (5.0") Bore
Non Magnetic Front Mount Cylinder "MF" MODEL LS LE LH
PISTON AREA TYPE STANDARD STROKES "A" _,D 10mm - 100mm 44,5(1.75") PUSH 126,7 cm² (19.6 in² ) 54,5(2.15") _ 5mm - 100mm 64,5(2.54") PULL 123,5 cm² (19.1 in² ) _,D 5mm - 100mm 152,0(5.98") 5,0 (.197")
98,8(3.889") 49,4 (1.945")
"B" "C" "D"
Standard Threads "EM" Option G1/8 PORT 1/8-27 M12X1,75 1/2-13 M8X1,25 5/16-18
"A" + STROKE
TYPE D 5,0(.197") + STK.
17,0(.67") (2 PLACES)
Rear Mount Cylinder "MR" W
W X
98,8 (3.889")
Z
49,4 (1.945") Y
X
Z
Mount Both End Cylinder "MB" W
Z
Y
20,0(Ø.787") ROD "C" TAP
"B" PORT (2 PLACES)
"D" TAP X 19,8(.78") DP (4 PLACES)
X
Y
Non Magnetic Thru Mount Cylinder "MT" MODEL LS LE LH
PISTON AREA TYPE STANDARD STROKES "A" _,D 44,5(1.75") 10mm - 45mm PUSH 126,7 cm² (19.6 in² ) 54,5(2.15") _ 5mm - 35mm 64,5(2.54") PULL 123,5 cm² (19.1 in² ) _,D 5mm - 25mm
"B" "C"
152,0(5.98") 5,0 (.197")
98,8(3.889") 49,4 (1.945")
Standard Threads "EM" Option 1/8-27 G1/8 PORT M12X1,75 1/2-13 "A" + STROKE
TYPE D 5,0(.197") + STK.
17,0(.67") (2 PLACES)
W
98,8 (3.889")
49,4 (1.945") X
Z
127 MODEL
8,5(Ø.335") DRILL THRU (4 PLACES)
Y
20,0(Ø.787") ROD "C" TAP
"B" PORT (2 PLACES)
x
BORE
STROKE
TYPE
MOUNTING
LS LE LH
OPTIONS
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61)
49
127mm (5.0") Bore Magnetic Front Mount Cylinder "MF" MODEL LS LE LH
PISTON AREA TYPE STANDARD STROKES "A" _,D 10mm - 100mm 54,5(2.15") PUSH 126,7 cm² (19.6 in² ) 64,5(2.54") _ 5mm - 100mm ² ² 74,5(2.93") PULL 123,5 cm (19.1 in ) _,D 5mm - 100mm 152,0(5.98") 5,0 (.197")
98,8(3.889") 49,4 (1.945")
SENSOR MOUNTING TRACK
"B" "C" "D"
Standard Threads "EM" Option G1/8 PORT 1/8-27 M12X1,75 1/2-13 M8X1,25 5/16-18
"A" + STROKE
TYPE D 5,0(.197") + STK.
17,0(.67") (2 PLACES)
Rear Mount Cylinder "MR" W
W X
98,8 (3.889")
49,4 (1.945")
Y
X
Z
Z
Mount Both End Cylinder "MB" W
Z
Y
20,0(Ø.787") ROD "C" TAP
"B" PORT (2 PLACES)
"D" TAP X 19,8(.78") DP (4 PLACES)
X
Y
Magnetic Thru Mount Cylinder "MT" MODEL LS LE LH
PISTON AREA TYPE STANDARD STROKES "A" _,D 54,5(2.15") 10mm - 35mm PUSH 126,7 cm² (19.6 in² ) 64,5(2.54") _ 5mm - 25mm 74,5(2.93") PULL 123,5 cm² (19.1 in² ) _,D 5mm - 15mm
"B" "C"
152,0(5.98") 5,0 (.197")
98,8(3.889") 49,4 (1.945")
SENSOR MOUNTING TRACK
98,8 (3.889")
17,0(.67") (2 PLACES)
X
Z
BORE
8,5(Ø.335") DRILL THRU (4 PLACES)
Y
x
M STROKE
TYPE
MOUNTING
MAGNETIC
OPTIONS
"B" PORT (2 PLACES)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54)
EM - INCH THREADS & PORT OPTIONS
5mm - 100mm STROKE (SEE STROKE RANGE)
BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58)
50
TYPE D 5,0(.197") + STK.
49,4 (1.945")
127 LS LE LH
"A" + STROKE
W
20,0(Ø.787) ROD "C" TAP
MODEL
Standard Threads "EM" Option G1/8 PORT 1/8-27 M12X1,75 1/2-13
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61)
152mm (6.0") Bore Non Magnetic Front Mount Cylinder "MF" MODEL LS
TYPE STANDARD STROKES _,D
PISTON AREA PUSH 181,46 cm² (28.2 in² ) 51,0(2.00") PULL 176,55 cm² (27.45 in² ) "A"
10mm - 100mm
"B" "C" "D"
Standard Threads "EM" Option G1/8 PORT 1/8-27 M16X2,0 5/8-18 M8X1,25 5/16-18
"A" + STROKE
177,0(6.97")
TYPE D 5,0(.197") + STK.
5,0(.197")
116,7(4.596")
19,8(.78") (2 PLACES)
58,4 (2.298")
Rear Mount Cylinder "MR" W
W X
116,7 (4.596")
58,4 (2.298")
Y
X
Z
Z
Mount Both End Cylinder "MB" W
Z
Y
25,0(Ø.984") ROD "C" TAP
"D" TAP X 19.8(.78") DP (4 PLACES)
"B" PORT (2 PLACES)
X
Y
Non Magnetic Thru Mount Cylinder "MT" MODEL LS
TYPE STANDARD STROKES _,D
PISTON AREA PUSH 181,46 cm² (28.2 in² ) 51,0(2.00") PULL 176,55 cm² (27.45 in² ) "A"
10mm - 40mm
"B" "C"
Standard Threads "EM" Option 1/8-27 G1/8 PORT M16X2,0 5/8-18 "A" + STROKE
177,0(6.97") 5,0(.197")
116,7(4.596")
19,8(.78") (2 PLACES)
58,4 (2.298")
TYPE D 5,0(.197") + STK.
W
116,7 (4.596")
58,4 (2.298") X
Z
152 MODEL
LS
BORE
8,5(Ø.335") DRILL THRU (4 PLACES)
Y
25,0(Ø.984") ROD "C" TAP
"B" PORT (2 PLACES)
x STROKE
TYPE
MOUNTING
OPTIONS
EM - INCH THREADS & PORT OPTIONS
10mm - 100mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58)
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61)
51
152mm (6.0") Bore Magnetic Front Mount Cylinder "MF" MODEL LS
TYPE STANDARD STROKES _,D
PISTON AREA PUSH 181,46 cm² (28.2 in² ) 61,0(2.40") PULL 176,55 cm² (27.45 in² ) "A"
10mm - 100mm
Standard Threads "EM" Option G1/8 PORT 1/8-27 M16X2,0 5/8-18 M8X1,25 5/16-18
"A" + STROKE
177,0(6.97")
TYPE D 5,0(.197") + STK.
5,0(.197")
116,7(4.596")
19,8(.78") (2 PLACES)
58,4 (2.298")
SENSOR MOUNTING TRACK
"B" "C" "D"
Rear Mount Cylinder "MR" W
W Z
X
116,7 (4.596")
58,4 (2.298")
Y
X
Z
Mount Both End Cylinder "MB" W
Z
Y
25,0(Ø.984") ROD "C" TAP
"D" TAP X 19.8(.78") DP (4 PLACES)
"B" PORT (2 PLACES)
X
Y
Magnetic Thru Mount Cylinder "MT" MODEL LS
TYPE STANDARD STROKES _,D
PISTON AREA PUSH 181,46 cm² (28.2 in² ) 61,0(2.40") PULL 176,55 cm² (27.45 in² ) "A"
10mm - 30mm
"B" "C"
"A" + STROKE
177,0(6.97") 5,0(.197")
116,7(4.596")
116,7 (4.596")
58,4 (2.298") X
Z
152 LS
TYPE D 5,0(.197") + STK.
W
BORE
8,5(Ø.335") DRILL THRU (4 PLACES)
Y
25,0(Ø.984") ROD "C" TAP
MODEL
19,8(.78") (2 PLACES)
58,4 (2.298")
SENSOR MOUNTING TRACK
Standard Threads "EM" Option G1/8 PORT 1/8-27 M16X2,0 5/8-18
x
M STROKE
TYPE
MOUNTING
MAGNETIC
OPTIONS
"B" PORT (2 PLACES)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54)
EM - INCH THREADS & PORT OPTIONS
10mm - 100mm STROKE (SEE STROKE RANGE) BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH END MOUNTS FF - FRONT FLANGE FR - REAR FLANGE (FOR FLANGES SEE PAGE 58)
52
HS - HIGH TEMPERATURE SEALS OPTION: AVAILABLE ON LE AND LH MODELS ONLY (SEE PAGE 62) PE - PORT ENLARGEMENT (AVAILABLE W/ “EM” OPTION ONLY = 1/4-18 NPT PORTS) RE - ROD EYE (SEE PAGE 61) RS - MALE STUD FOR ROD END (SEE PAGE 61) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61)
CYLINDER ACCESSORIES
ACCESSORIES
12mm - 152mm Bore
Solid State Limit Sensors
Solid State Limit Sensors Nason limit sensors are magnetically activated digital output devices. They are on/off devices used to sense piston location on Nason "L" series cylinders. A magnet is added to the piston of the cylinder and a 60∞ dovetail is machined into the cylinder body to allow the sensors to be added. Magnetoresitive technology (similar to Hall Effect) is used to produce the sensors. This results in greater sensitivity and reduced dead-band compared to Hall devices.
Specifications Part Number
SKS, SKP
SCS, SCP
Switch Logic
Solid State Output, Normally Open
Solid State Output, Normally Open
Sensor Type
NPN, Current Sinking
PNP, Current Sourcing
Operating Voltage
5-28 VDC
Switching Current
200mA max.
Voltage Drop
1.0 V max
Switching Power
4.8 Watts max.
LED Indicator: Switch Active
Red
Operating Temperature
-20∞C to 80∞C (-4∞F to 176∞F)
Switching Speed
4 uS operate, 4 uS release
Enclosure Classification
IP67, NEMA 6
Cable
2.6 dia, 3C, 26 AWG, Black PVC
Housing
Glass-filled Polypropylene
Shock
50 G max
Vibration
9 G max
Flying Lead Sensors - Part #: SKS, SCS 11,0 (.43")
19,0 (.75")
6,4 (.25")
2,75 METER (108")
LED
LOCKING SCREW UNDER CABLE
WIRING: BROWN (+) BLACK (O) BLUE (-)
ÿ 2,6mm (.10")
Quick Disconnect Sensors - Part #: SKP, SCP 11,0 (.43")
6,4 (.25")
19,0 (.75")
0,15 METER (6.0")
WIRING: PIN 1 (+) PIN 4 (O) PIN 3 (-)
1
LED
LOCKING SCREW UNDER CABLE
ÿ 2,6mm (.10")
4
3
M8x1 3 PIN MALE CONNECTOR
Mates with Part Number "SR" sensor receptacle. See page 56.
54
Sensor Low Profile
Low Profile Solid State Limit Sensors Specifications
Nason limit sensors are magnetically activated digital output devices. They are on/off devices used to sense piston location on Nason "C" series cylinders. A magnet is added to the piston of the cylinder and a dovetail is machined into the cylinder body to allow the sensors to be added. Magnetoresitive technology (similar to Hall Effect) is used to produce the sensors. This results in greater sensitivity and reduced dead-band compared to Hall devices.
Part Number
NPL, NPP
PNL, PNP
Switch Logic
Solid State Output, Normally Open
Solid State Output, Normally Open
Sensor Type
NPN, Current Sinking
PNP, Current Sourcing
Operating Voltage
5-28 VDC
Current Consumption: On Off
16mA @ 24 VDC
14mA @ 24 VDC
7mA @ 24 VDC
7mA @ 24 VDC
Switching Current
100mA @ 24 VDC, 30mA @ 5 VDC
Voltage Drop
1.5 V max @ 100mA
Response Frequency
1 KHz max
LED Indicators: Power On Switch Active
Green Red
Operating Temperature
-10∞C to 70∞C (14∞F to 158∞F)
Circuit Protection
Reverse Polarity, Surge Suppression
Enclosure Classification
IEC 529 IP67, NEMA 6P
Cable
3.3 dia, 3C, 24 AWG, Black PVC
Housing
Zinc Diecast - Black
Zinc Diecast - Silver
Shock
50 G max
Vibration
9 G max
Flying Lead Sensors - Part #: NPL, PNL LOCKING SCREW
1,0 METER (39.27")
WIRING: BROWN (+) BLACK (O) BLUE (-)
S
6,0 (.24")
P
14,0 (.55")
ÿ 3,3 (.13") 14,2 (.56")
LED INDICATORS
Quick Disconnect Sensors - Part #: NPP, PNP
14,0 (.55")
0,15 METER (6.0")
WIRING: PIN 1 (+) PIN 4 (O) PIN 3 (-)
S
LOCKING SCREW
1
P
6,0 (.24")
ÿ 3,3 (.13") 14,2 (.56")
LED INDICATORS
4
3
M8x1 3 PIN MALE CONNECTOR
Mates with Part Number "SR" sensor receptacle. See page 56.
55
Sensor Receptacle
Sensor Receptacle 8mm female molded locking connector Mates with SCP, SKP, NPP, PNP Sensors
Part #: SR 5,0 METER (196")
WIRING: BROWN, PIN 1 BLACK, PIN 4 BLUE, PIN 3
32,0 (1.26")
3
ÿ 4,5 (.18")
4
(+) (O) (-)
1
ÿ 9,7 (.38") M8x1 3 SOCKET FEMALE CONNECTOR
Sensor Schematics
PNP (Sourcing) output sensors complete a circuit by connecting the load to the supply current. These sensors are typically used on controllers with a single power supply. All sensors will utilize the same supply voltage.
NPN (Sinking) output sensors complete a circuit by connecting the load to ground. These sensors are typically used on controllers with multiple power supplies. All sensors can utilize different supply voltages. The ground is their common factor. +5 to +28 VDC
+5 to +28 VDC
BROWN + SCS, SCP, PNL, PNP SENSORS
BROWN + BLACK O
PNP (SOURCING) OUTPUT (Shown not activated)
LOAD
SKS, SKP, NPL, NPP SENSORS
BLACK O
LOAD
NPN (SINKING) OUTPUT BLUE -
(Shown not activated)
BLUE -
Important Notes - All Nason sensors are magnetically activated devices. Cylinders should be ordered with option "M" for a magnetic piston. - Presence of electromagnetic fields, external magnets, welding fields, etc. may effect operation of Nason sensors. - Temperature ratings for sensors should be observed and will override seal option temperature ratings of the cylinder.
56
Alignment Couplers
"D"
"F" DIA.
"E" "G" DIA
"H" WRENCH FLAT
Features • Hardened Steel Components with Black Oxide Finish
"C" LATERAL ADJUSTMENT (FROM CENTERLINE)
• 0,15mm (.006") Max. Axial Play • Temperature rating -10°C to 204°C (0°F to 400°F)
1° MAX.
"B" FEMALE THREAD
"A" MALE THREAD
"J" HEX FOR MALE THREAD
Load Rating
Bore Part Number AC-M4 AC-M4-C8 AC-C8 AC-C8-M4 AC-M5 AC-M5-F10 AC-M5-C10 AC-F10 AC-F10-M5 AC-F10-C10 AC-C10 AC-C10-M5 AC-C10-F10 AC-M6 AC-M6-C14 AC-M6-F14 AC-C14 AC-C14-M6 AC-C14-F14 AC-F14 AC-F14-M6 AC-F14-C14 AC-M8 AC-M8-C516 AC-M8-F516 AC-C516 AC-C516-M8 AC-C516-F516 AC-F516 AC-F516-M8 AC-F516-C516 AC-M10 AC-M10-F38 AC-M10-C38 AC-F38 AC-F38-M10 AC-F38-C38 AC-C38 AC-C38-M10 AC-C38-F38 AC-M12 AC-M12-C12 AC-M12-F12 AC-C12 AC-C12-M12 AC-C12-F12 AC-F12 AC-F12-M12 AC-F12-C12
A Male Thread M4x0,7 X 6,3mm M4x0,7 X 6,3mm #8-32 X .31" #8-32 X .31" M5x0,8 X 8,4mm M5x0,8 X 8,4mm M5x0,8 X 8,4mm #10-32 X .31" #10-32 X .31" #10-32 X .31" #10-24 X .31" #10-24 X .31" #10-24 X .31" M6x1,0 X 9,5mm M6x1,0 X 9,5mm M6x1,0 X 9,5mm 1/4-20 X .41" 1/4-20 X .41" 1/4-20 X .41" 1/4-28 X .41" 1/4-28 X .41" 1/4-28 X .41" M8x1,25 X 13,7mm M8x1,25 X 13,7mm M8x1,25 X 13,7mm 5/16-18 X .54" 5/16-18 X .54" 5/16-18 X .54" 5/16-24 X .54" 5/16-24 X .54" 5/16-24 X .54" M10X1,5 X 13,7mm M10x1,5 X 13,7mm M10x1,5 X 13,7mm 3/8-24 X .54" 3/8-24 X .54" 3/8-24 X .54" 3/8-16 X .54" 3/8-16 X .54" 3/8-16 X .54" M12x1,75 X 21,8mm M12x1,75 X 21,8mm M12x1,75 X 21,8mm 1/2-13 X .88" 1/2-13 X .88" 1/2-13 X .88" 1/2-20 X .88" 1/2-20 X .88" 1/2-20 X .88"
B Female Thread M4x0,7 X 5,5mm #8-32 X .22" #8-32 X .22" M4x0,7 X 5,5mm M5x0,8 X 8,0mm #10-32 X .31" #10-24 X .31" #10-32 X .31" M5x0,8 X 8,0mm #10-24 X .31" #10-24 X .31" M5x0,8 X 8,0mm #10-32 X .31" M6x1,0 X 11,0mm 1/4-20 X .44" 1/4-28 X .44" 1/4-20 X .44" M6x1,0 X 11,0mm 1/4-28 X .44" 1/4-28 X .44" M6x1,0 X 11,0mm 1/4-20 X .44" M8x1,25 X 12,0mm 5/16-18 X .50" 5/16-24 X .50" 5/16-18 X .50" M8x1,25 X 12,0mm 5/16-24 X .50" 5/16-24 X .50" M8x1,25 X 12,0mm 5/16-18 X .50" M10x1,5 X 14,0mm 3/8-24 X .56" 3/8-16 X .56" 3/8-24 X .56" M10x1,5 X 14,0mm 3/8-16 X .56" 3/8-16 X .56" M10x1,5 X 14,0mm 3/8-24 X .56" M12x1,75 X 22,0mm 1/2-13 X .88" 1/2-20 X .88" 1/2-13 X .88" M12x1,75 X 22,0mm 1/2-20 X .88" 1/2-20 X .88" M12x1,75 X 22,0mm 1/2-13 X .88"
C
D
E
F
G
H
0,5 (.02")
10,3 (.40")
8,7 (.34")
14,0 (.55")
6,0 (.24")
5,0 (.20")
J 2,5 5/64
Max Pull 5 X S.F.
.67 kN (150 lbs.)
3 0,8 (.03")
14,3 (.56")
10,3 (.41")
19,0 (.75")
8,0 (.31")
1.11 kN (250 lbs.)
7,0 (.28") 3/32
4 0,8 (.03")
19,3 (.76")
14,3 (.56")
28,5 (1.13")
12,7 (.50")
3.55 kN (800 lbs.)
11,0 (.43") 1/8
5 0,8 (.03")
21,0 (.83")
16,0 (.63")
28,5 (1.13")
12,7 (.50")
4.66 kN (1050 lbs.)
11,0 (.43") 5/32
6 0,8 (.03")
24,0 (.95")
19,0 (.75")
28,5 (1.13")
16,0 (.63")
7.11 kN (1600 lbs.)
14,0 (.55") 3/16
8 1,5 (.06")
35,0 (1.38")
28,5 (1.13")
38,0 (1.50”)
19,0 (.75")
15.55 kN (3500 lbs.)
17,0 (.67") 1/4
57
Front Flanges Face Flange Mounting - "FF" & "FR" 12mm Thru 76mm Bores "A"
FLANGES CAN BE ROTATED 90°
"F"
"B"
"H" "G"
"C"
"E" (2 PLACES)
"D"
SHOWN AS "FF" FRONT FLANGE USE "FR" FOR REAR FLANGE
Material: Anodized Aluminum Face Flange Mounting - "FF" & "FR" 101mm Thru 152mm Bores "A" SQ. "C"
"B"
"D"
"C"
"F"
"D"
12°(127mm BORE ONLY)
"E" (4 PLACES)
"F" SHOWN AS "FR" USE "FF" FOR FRONT FLANGE
Material: 101mm Bore - Anodized Aluminum 127mm & 152mm Bore - Zinc Plated Steel
58
BORE "A" "B" 6,4 (.25") 12 50,8 (2.0") 20 9,5 (.38") 25 6,4 (.25") 28,5 63,5 (2.5") 32 9,5 (.38") 76,2 (3.0") 40 93,0 (3.66") 12,7 (.50") 50 120,0 (4.72") 19,05 (.75") 63 133,1 (5.24") 76 19,05 (.75") 101 127,0 (5.0") 127 177,8 (7.0") 9,5 (.38") 152
"C"
"D"
5,4 (.21")
40,0 (1.58")
3,9 (.15") 6,4 (.25") 5,75 (.23") 8,1 (.32") 7,5 (.30")
43,0 (1.69") 50,8 (2.00") 52,0 (2.05") 60,0 (2.36") 78,0 (3.07") 102,0 (4.02") 115,1 (4.53") 108,0 (4.25")
"E"
"F"
4,5 (.18")
25,4 (1.0")
5,5 (.22")
31,8 (1.25")
8,64 (.34")
38,1 (1.50") 46,5 (1.83") 59,9 (2.36") 66,5 (2.62") 63,5 (2.50")
12,7 (.50") 152,4 (6.00") 10,5 (.41")
88,9 (3.50")
9,0 (.35") 9,5 (.38")
8,5 (.33") 10,5 (.41")
"G" 22,2 (0.88") 31,8 (1.25")
"H" 11,1 (.44") 15,9 (.63")
38,1 (1.50") 19,05 (.75") 44,5 (1.75") 50,8 (2.00") 63,5 (2.50") 76,2 (3.00") 88,9 (3.50")
22,25 (.88") 25,4 (1.00") 31,8 (1.25") 38,1 (1.50") 44,45 (1.75")
N/A
N/A
Side Flange Mounting
Side Flange Mounting - "FS" 12mm Thru 76mm Bores
"F"
"B"
"E"
"G"
"A"
SEE CYLINDER PAGES FOR SECOND BRACKET REQUIREMENTS
"D"
"C"
Material: Anodized Aluminum Bore 12 20 25 28,5 32 40
"B"
"C"
"D"
44,5 (1.75")
"A"
6,35 (.25")
4,8 (.19")
35 (1.38")
50,8 (2.0")
9,5 (.38")
5,4 (.21")
40 (1.58")
3,9 (.15")
43 (1.69")
6,35 (.25")
50,8 (2.0")
5,75 (.23")
52 (2.05")
8,1 (.32")
60 (2.36")
63,5 (2.5") 76,2 (3")
50
93 (3.66")
63
120 (4.72")
76
133 (5.24")
4,8 (.19") 9,5 (.38") 12,7 (.50") 19 (.75")
7,5 (.30")
78 (3.07") 102 (4.02")
9,0 (.35")
115 (4.53")
"E"
"F"
"G"
16 (.63")
7,9 (.31")
4,5 (.18") 19 (.75")
9,5 (.38")
25,4 (1.00")
12,7 (.50")
5,5 (.22") 5,5 (.22") 8,5 (.33") 10,5 (.41")
End Flange Mounting - "FE" 12mm Thru 76mm Bores
"F"
"B"
SEE CYLINDER PAGES FOR SECOND BRACKET REQUIREMENTS
"G" "E"
"A"
"D"
"C" "H"
Material: Anodized Aluminum "C" "A" "B" 25,4 (1.00") 6,35 (.25") 4,2 (.17") 31,8 (1.25") 4,4 (.17") 9,5 (.38") 38,1 (1.50") 4,05 (.16") 4,8 (.19") 38,1 (1.50") 4,8 (.19")
28,6 (1.13")
32
44,5 (1.75")
5,0 (.20")
34,5 (1.36")
40
50,8 (2.00")
4,9 (.19")
41,0 (1.61")
50
63,5 (2.50") 12,7 (.50")
8,0 (.32")
47,5 (1.87")
63
76,2 (3.00") 88,9 (3.50")
10,1 (.40") 9,95 (.39")
56,0 (2.20")
76
Bore 12 20 25 28,5
9,5 (.38")
19 (.75")
"D" 17,0 (.67") 23,0 (.91")
"E" 4,5 (.18")
30,0 (1.18")
69,0 (2.72")
"F" 24,0 (.95") 27,0 (1.06")
"G"
"H"
4,0 (.16")
8,0 (.32")
5,6 (.22")
28,6 (1.13")
4,8 (.19")
9,7 (.38")
5,5 (.22")
35,4 (1.39")
5,0 (.20")
10,0 (.39")
8,5 (.33")
41,4 (1.63")
8,0 (.32")
16,0 (.63")
10,5 (.41")
45,4 (1.79") 10,0 (.39")
20,0 (.79")
59
Pivot
Long Pivot Mounting Style - "PL" "F" "A"
"G"
"N"
"H" ÿ PIN
"C" ÿ "E"
"D"
"B"
"M"
"J"
"L"
Bore 20
"A" 48,8 (1.92")
25
52,8 (2.08")
28.5
48,3 (1.90")
32
54,9 (2.16")
40 50
58,7 (2.31") 65,8 (2.59")
63
67,8 (2.67")
76
73,7 (2.90")
"B"
6,35 (.25")
"C"
"D"
"E"
"F"
"G"
"H"
"J"
"K"
5,4 (.21")
20 (.79")
31.8 (1.25")
25 (.98")
12,5 (.49")
8,0 (.32")
6,0 (.24")
13 (.51")
38,1 (1.50") 25,4 (1.0") 12,7 (.50")
7,9 (.31")
5,5 (.22") 27 (1.06") 6,8 (.27")
9,53 (.38")
"K"
8,7 (.34")
22 (.87")
31.8 (1.25")
27 (1.06")
38,1 (1.50")
34 (1.34")
50,8 (2.00") 35 (1.38")
46 (1.81")
12,5 (.49")
25 (.98")
17,5 (.69")
63,5 (2.50") 40 (1.58")
20,0 (.79")
8,0 (.32")
19 (.75") 36,0 (1.42") 13,0 (.51")
10,0 (.39") 20 (.79") 40,0 (1.58") 16,0 (.63")
"A" "H" "B"
"E"
ÿ "F" DIA.
"G" RADIUS
Bore
"A"
"B"
"C"
"D"
"E"
"F"
"G"
"H"
12
20 (.79")
5,9 (.23")
6 (.24")
12 (.47")
6 (.24")
5 (.20")
13,9 (.55")
10,9 (.43")
22 (.87")
11 (.43")
8 (.32")
20 25 28.5 32
12 (.47")
23 (.91") 12 (.47") 25 (.98")
16 (.63")
63 76
60
40 (1.58")
14 (.55")
12,5 (.49")
7,9 (.31") 25 (.98 ")
12,5(.49")
19 (.75")
35 (1.38")
17,5 (.69")
25 (.98")
40 (1.58")
20 (.79")
40 50
14 (.55") 15,5 (.61")
8 (.32")
16 (.63")
12 (.47") 23 (.91")
10 (.39")
25 (.98")
21 (.83")
- REAR PIVOT CAN BE ROTATED 90∞ - REAR PIVOT OPTION IS ONLY AVAILABLE ON SINGLE END MODELS ONLY - REAR PIVOTS ARE ANODIZED ALUMINUM WITH A SINTERED BRONZE BEARING
28,0(1.10") 9,0 (.35") 30,0 (1.18")
13 (.51")
Pivot on Rear Face Mounting Style - "PR"
ÿ "D"
"N"
25,0 (.98") 7,0 (.28") 23,0 (.91")
6,0 (.24")
- LONG PIVOTS ALLOW FOR A MINIMUM 180∞ OF MOVEMENT - LONG PIVOTS ARE ANODIZED ALUMINUM WITH SINTERED BRONZE BEARINGS - PIVOT PINS ARE STEEL WITH STEEL COTTER PIN, INCLUDED
"C"
"M"
6,35 (.25") 12,7 (.50") 25,4 (1.0") 9,7 (.38")
8,0 (.32")
10,0 (.39")
"L"
25,0 (.98")
40,0 (1.58")
Rod End Options
Rod Eye Option - "RE" "B" "A" SQ.
"C" SEE CYLINDER PAGES FOR THREAD SIZE
"D"
"F" RADIUS
Bore 12 20 25 28,5 32 40 50 63 76
"A" 7,9(.31") 12,7 (.50") 16 (.63") 19 (.75")
"B" 8,0(.32")
"C" 4,0(.16")
12 (.47")
6 (.24")
12,7(.50")
6,35(.25")
20 (.79")
10 (.39")
25 (.98")
12,5 (.49")
"D" 3,96(.156")
"E" 3,0(.119")
"F" 5,0(.20")
5 (.20")
8 (.32")
6,35 (.25") 8 (.32") 9,5 (.38")
6,35(.25")
7,6(.30")
8 (.32")
12 (.47")
10 (.39")
14 (.55")
"E"
12,7 (.50")
25,4 (1.00")
Rod Extensions Option - See Chart Below "EXTENSION" STD. EX. TYPE "D" CYLINDER
Extension
"RF"
"RT"
"RN"
"RY"
Length
5 (.20")
10 (.39")
15 (.59")
20 (.79")
"RV"
"RH"
25 (.98") 35 (1.38")
For standard extension, see catalog pages. If cylinder is double ended, extension will be on both ends. Consult factory for single ended extension on a double ended cylinder.
STD. EX. + STROKE "EXTENSION"
Rod Stud Option - "RS" THREAD LENGTH (2 X THD. DIAMETER) STD. EXT.
THREAD SIZES STANDARD PER CATALOG PAGES
Bore 12 20 25 28,5 32 40 50 63 76
Std. Ext. 3 (.12") 3 (.12") 5 (.20") 3,2(.13") 5 (.20") 5 (.20") 5 (.20") 5 (.20") 5 (.20")
Thread Length 8 (.32") 10 (.39") 10 (.39") 16(.63") 12 (.47") 16 (.63") 20 (.79") 24 (.95") 24 (.95")
61
Urethane Shock Pads
Urethane Shock Pads Option - "UF", "UR", "UB" UF (URETHANE SHOCK PAD ON FRONT)
UR (URETHANE SHOCK PAD ON REAR)
UB (URETHANE SHOCK PADS ON BOTH ENDS) - Urethane shock pads available on 20mm thru 76mm Bores in models LS, LE, LH, and LC. - Pneumatic service only. - Temperature rating: -18∞C to 82∞C (0∞F -180∞F). - Use for increased noise reduction, minor piston impact, or high cycle rates. - Does not increase cylinder length. - Shock pads mechanically retained in cap and head. - Shock pads are replaceable. - Shock pads are NOT suitable replacements in applications requiring shock absorbers.
Seal Options
OPTION BLANK (NO CODE) HS SH
MATERIAL
MODEL
BORE SIZE
12mm LS, LE, LH 20mm thru 76mm 101mm thru 152mm 12mm FLUOROCARBON LE, LH 20mm thru 76mm 101mm thru 152mm NITRILE
NITRILE
LS, LE, LH 20mm thru 76mm
PRESSURE TEMPERATURE RATING RATING 10 BAR (150 PSI) 17 BAR (250 PSI) 14 BAR (200 PSI) 10 BAR (150 PSI) 17 BAR (250 PSI) 14 BAR (200 PSI) 35 BAR (500 PSI)
-18∞C to 95∞C (0∞F to 200∞F) -18∞C to 150∞C (0∞F to 302∞F) -10∞C t0 70∞C (14∞F to 158∞F)
MEDIA Air (Clean, Dry or Lubricated) Air (Clean, Dry or Lubricated) Hydraulic Fluid (Mineral Oil, Water Polyglycal Solutions Water-in-Oil Emulsions)
- Temperature and pressure ratings are based on a combination of seal materials, lubrication, and cylinder design. - For higher or lower temperature and/or pressure ratings, consult Nason for a custom solution. Nason has successfully designed cylinders to operate at temperature extremes of -40∞F and +500∞F respectively, as well pressures as low as 5 PSI and as high as 3000 PSI.
62
Chrome plated guide rods
Sintered bronze bearing with non-migrating lubricant
Fabric reinforced phenol resin wear strip
Machine bore anodized aluminum housing Anodized aluminum tooling plate
Low friction figure 8 piston seal
Low friction cupseal-integral rod wiper
Double wound 302 SS retaining wire
Magnet for position sensing
LC SERIES NON-ROTATING LOAD CARRYING CYLINDERS
Actuator The LC series guided cylinder actuator is based on Nason’s LH cylinder. Extended internal rod bearing, wear banded piston, and integral rod wiper are all standard. Precision machined components, self-lubricating bearings, and PTFE impregnated lubricant ensure long life and continued low friction operation. Guiding Mechanism Oversized, chrome plated guide rods riding in specially formulated sintered bronze bearings provide rigid load carrying capability. Guide rods
are located externally of the sealed cylinder chamber but inside the overall envelope of the cylinder. The guide rods are extended past the cylinder housing to ensure no finger trap exists. The guide rods are piloted into the tooling plate to provide more rigidity and ease of disassembly for modification. Tooling Plate Tooling plates are thick, anodized aluminum and are provided with tapped through holes for direct mounting, or through mounting, into your part. Magnetic Piston Sensing Magnetic piston and sensor mounting tracks are included as standard. See the sensor section for Nason’s solid state sensor selection (sold separately). Rebuildable All LC series cylinders are field rebuildable.
LC SERIES
Common Features Nason’s LC series of pneumatic guided load actuators were designed to be compact, long lasting, load carrying devices for today’s demanding design requirements. They are offered in various mounting styles, bores, and strokes to fill the need of today’s design engineers.
How to Order
How to Order Example: Part Number: LC-20X40MR-EMHS LC
20
MODEL
BORE
x
MR
40 STROKE
MODEL LC - Non-Rotating, Guided Load cylinder
TYPE
EM
MOUNTING
HS OPTIONS
MOUNTING MR - Threads on Rear Face (Opposite Rod) MS - Threads on Side of Cylinder Body FR - Flange on Rear Face (Opposite Rod)
BORE
PR - Pivot on Rear Face
12 - 12mm (.47") 20 - 20mm (.79") 25 - 25mm (.98") 28.5 - 28.5mm (1.13") 32 - 32mm (1.26") 40 - 40mm (1.58") 50 - 50mm (1.97")
EM - InchThreads (Mounting, Ports, and Tooling Plate) (See product pages for sizes) HS - High Temperature Seals -10∞C to 150∞C (0∞F to 302∞F) (Available on ì LEî and ì LHî Models Only)
63 - 63mm (2.48")
BP - Blank Tooling Plate (No Holes)
STROKE
UB - Urethane Shock Pads Both Ends (20 thru 63mm Bores)
See Stroke Table
TYPE Blank (No Code) - Double Acting, Single Rod D - Double Acting, Double Rod
64
OPTIONS
PE - 1/4 Ports (Available on 50 and 63mm Bores) With EM Option
UF - Urethane Shock Pad Front (Rod End) (20 thru 63mm Bores) UR - Urethane Shock Pad Rear (Opposite Rod) (20 thru 63mm Bores)
Engineering Data
Load Chart Operating Media:
Air (Clean, Dry or Lubricated)
Operating Temperature:
-10∞C to 9 5∞C (0∞F to 200∞F)
Packing:
Buna N
1. Loads based on .08mm (.003") deflection up to 25mm stroke and .16mm (.006") deflection over 25mm stroke and maximum life.
Lubrication:
PTFE impregnated grease
2. Rotational tolerance = +/ñ .5 degree
Stroke Tolerance:
+0,75mm/-0mm (+0.03"/-0")
3. Speed controls or external shock absorbers are recommended to reduce impact and extend cylinder life.
Maximum Operating Pressure: 17 Bar (250 PSI)
Piston Area Chart
10.89 (24)
Bore
Push (Rod Extend)
12
1,13 cm (.18 in )
0,85 cm (.14 in )
20
3,14 cm2 (.48 in2)
2,64 cm2 (.40 in2)
25
4,91 cm2 (.76 in2)
4,12 cm2 (.64 in2)
28.5 6,41 cm2 (1.0 in2)
5,28 cm2 (.82 in2)
2
2
10.43 (23) 9.98 (22)
8,04 cm2 (1.25 in2)
6,91 cm2 (1.07 in2)
40 12,56 cm2 (1.95 in2)
10,55 cm2 (1.64 in2)
50 19,63 cm2 (3.04 in2)
17,62 cm2 (2.73 in2)
63 31,17 cm2 (4.83 in2)
9.53 (21)
2
28,03 cm2 (4.34 in2)
9.07 (20) 8.62 (19) 8.16 (18) 7.71 (17) 7.25 (16) 6.80 (15) 6.35 (14)
LOAD kg (lbs)
32
2
Pull (Rod Retract)
5.90 (13) 5.44 (12)
LC-63
4.99 (11) 4.54 (10) 4.08 (9) 3.63 (8)
Stock Stroke Table Bore 12 20 25 28.5 32 40 50 63
Standard Stroke Lengths 15, 25, 40
LC-50
3.18 (7)
LC-40
2.72 (6)
LC-28.5
2.27 (5)
LC-32
1.81 (4) 1.36 (3)
LC-25
LC-20
.91 (2) .45 (1)
15, 25, 40, 50
.34 (.75) .23 (.50)
LC-12
.11 (.25)
12.7, 25.4, 38.1, 50.8
0
15, 25, 40, 50
5 (.20)
15 (.59)
25 (.98)
40 (1.57)
50 (1.97)
75 (2.95)
STROKE mm (in)
15, 25, 40, 50, 75
Cylinder Output Force Formula Piston Area x Pressure = Output Force Piston Area (in2) x Pressure (PSI) = lbf (Pounds Force) Piston Area (cm2) x Pressure (kg/cm2) = kgf (Kilograms Force) Piston Area (cm2) x Pressure (kg/cm2) x 9.8 = Newtons Piston Area (cm2) x Pressure (Bar) x 10 = Newtons Piston Area (cm2) x Pressure (Bar) x 1.02 = kgf (Kilograms Force)
65
LC 12mm (1/2") Bore Rear Mount Cylinder "MR" PISTON AREA MODEL STANDARD STROKES "A" 15mm PUSH 1,13 cm² (0.18 in² ) 36,0(1.42") 25mm LC PULL 0,85 cm² (0.14 in² ) 40mm "A" + STK.
19,0 SQ. (.75")
6,4(.25") (2 PLACES)
7,6(.30")
6,0(.24") 6,0(.24")
W X
Standard Threads "EM" Option M4X0,7 #8-32 M5X0,8 #10-32 M4X0,7 #8-32
2,5(.10")
8,0(.32")
12,0(.47")
Z
"B" "C" "D"
13,5(.53")
20,0 SQ. (.79") 3,3(.13") 3,3(.13")
4,1(.17")
12,0(.47")
Y
13,5(.53")
8,0(Ø.315") X 2,5(.10") DP
"B" TAP THRU (2 PLACES)
"C" PORT (2 PLACES)
"D" TAP X 10,4(.41") DP (2 PLACES)
SENSOR TRACK (2 PLACES, 180° APART)
Side Mount Cylinder "MS" MODEL STANDARD STROKES "A" 15mm 36,0(1.42") 25mm LC 40mm
PISTON AREA PUSH 1,13 cm² (0.18 in² ) PULL 0,85 cm² (0.14 in² )
12,0(.47")
8,0(Ø.315") X 2,5(.10") DP
9,0(.35")
X
Z Y
"D" TAP X 4,5(.18") DP (2 PLACES)
4,1(.17")
12,0(.47")
SENSOR TRACK (2 PLACES, 180° APART)
"C" PORT (2 PLACES)
"B" TAP THRU (2 PLACES)
LC
12
MODEL
BORE
x STROKE
MOUNTING
15mm - 40mm STROKE (SEE CHART ABOVE)
MR - REAR MOUNT MS - SIDE MOUNT FR - REAR FLANGE PR - PIVOT REAR (SEE PAGE 58-60 FOR DETAILS)
66
6,4(.25") (2 PLACES)
7,6(.30")
6,0(.24")
W
4,0(.16")
"A" + STK.
6,0(.24")
7,0(.28")
10,0(.39")
Standard Threads "EM" Option #8-32 M4X0,7 M5X0,8 #10-32 M3X0,5 #4-40
8,0(.32")
19,0 SQ. (.75")
8,0(Ø.315") X 1,5(.06") DP
8,0 (.31")
"B" "C" "D"
OPTIONS
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE CATALOG PAGE 54 FOR DETAILS)
EM - INCH THREADS & PORT OPTIONS: HS - HIGH TEMPERATURE SEALS OPTION: (SEE CATALOG PAGE 62 FOR DETAILS) BP - BLANK TOOLING PLATE
LC 20mm (3/4") Bore Rear Mount Cylinder "MR" MODEL LC
TYPE STANDARD STROKES "A" 15mm 25mm 33,5(1.32") _,D 40mm 50mm
TYPE D 13,0(.51") + STK 21,0 (.83")
6,75(.27")
X
Y
5,37(.21")
6,9(.27") (2 PLACES)
6,75(.27")
Z
31,75(1.25") SQ.
13,0(.51")
9,15(.36")
W
Standard Threads "EM" Option #8-32 M4X0,7 M5X0,8 #10-32 M5X0,8 #10-32
"B" "C" "D"
PULL 2,64 cm² (0.40 in² ) "A" + STK.
30,25(1.19") SQ. 13,5 (.53")
PISTON AREA PUSH 3,14 cm² (0.48 in² )
5,37 (.21")
6,4(.25")
21,0 (.83")
13,5(.53")
10,0(Ø.394) X 2,5(.10") DP
SENSOR TRACK (2 PLACES, 90° APART)
"C" PORT (2 PLACES)
"B" TAP THRU (2 PLACES)
"D" TAP X 11,2(.44") DP (2 PLACES)
Side Mount Cylinder "MS" MODEL LC
TYPE STANDARD STROKES "A" 15mm 25mm 33,5(1.32") _,D 40mm 50mm
PISTON AREA
"B" "C" "D"
PUSH 3,14 cm² (0.48 in² ) PULL 2,64 cm² (0.40 in² )
Standard Threads "EM" Option M4X0,7 #8-32 M5X0,8 #10-32 M4X0,7 #8-32 "A" + STK.
30,25(1.19") SQ.
13,0(.51")
13,5 (.53")
8,0(Ø.315") X 2,5(.10") DP 10,0(.39")
TYPE D 13,0(.51") + STK
9,15(.36") 6,9(.27") (2 PLACES)
6,75(.27")
10,0(Ø.394") X 2,5(.10") DP 8,0(.32")
X
Z
6,4 (.25")
6,75(.27")
W
13,5(.53")
13,0(.51") Y "D" TAP X 5,8(.23") DP (2 PLACES) 5,0(.20")
SENSOR TRACK (2 PLACES, 90° APART)
"B" TAP THRU (2 PLACES)
10,0(.39")
LC
20
MODEL
BORE
x STROKE
TYPE
MOUNTING
15mm - 50mm STROKE (SEE CHART ABOVE)
OPTIONS
"C" PORT (2 PLACES)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE CATALOG PAGE 54 FOR DETAILS)
EM - INCH THREADS & PORT OPTIONS:
BLANK - NO CODE D - DOUBLE ROD (SEE PAGE 64 FOR DETAILS) MR - REAR MOUNT MS - SIDE MOUNT FR - REAR FLANGE PR - PIVOT REAR (SEE PAGE 58-60 FOR DETAILS)
HS - HIGH TEMPERATURE SEALS OPTION: (SEE CATALOG PAGE 62 FOR DETAILS) BP - BLANK TOOLING PLATE UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE CATALOG PAGE 62 FOR DETAILS)
67
LC 25mm (1.0") Bore Rear Mount Cylinder "MR" MODEL LC
TYPE STANDARD STROKES "A" 15mm 25mm 34,0(1.34") _,D 40mm 50mm
PISTON AREA
PULL 4,12 cm² (0.64 in² ) 15,0 (.59")
33,5(1.32") SQ.
21,0 (.83")
"B" "C" "D" "E"
PUSH 4,91 cm² (0.76 in² )
"A" + STK.
13,5(.53")
X
Z
25,5 (1.00")
SENSOR TRACK (2 PLACES, 90° APART)
"E" TAP THRU (2 PLACES)
4,75 (.19")
21,0(.83")
Y
6,75(.27")
4,75(.19")
6,1(.24")
10,5(.41")
W
25,5 (1.00")
6,9(.27") (2 PLACES)
10,0(Ø.394") X 2,5(.10") DP
"B" TAP THRU (2 PLACES)
35,0(1.38") SQ.
TYPE D 15,0(.59") + STK
9,15 (.36")
10,5(.41")
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32 M5X0,8 #10-32 M6X1,0 1/4-20
"C" PORT (2 PLACES)
"D" TAP X 11,2(.44") DP (2 PLACES)
6,75(.27")
13,5(.53")
Side Mount Cylinder "MS" MODEL LC
TYPE STANDARD STROKES "A" 15mm 25mm 34,0(1.34") _,D 40mm 50mm
PISTON AREA
"B" "C" "D" "E"
PUSH 4,91 cm² (0.76 in² ) PULL 4,12 cm² (0.64 in² ) 15,0 (.59")
33,5(1.32") SQ. 21,0 (.83")
8,0(Ø.315") X 2,5(.10") DP 12,0(.47") 9,5 (.37")
13,5(.53")
6,9(.27") (2 PLACES)
10,5(.41")
6,1(.24")
X
Z Y
6,75(.27")
6,0 (.24")
"E" TAP THRU (2 PLACES)
12,0 (.47") "D" TAP X 5,8(.23") DP (2 PLACES)
21,0(.83")
SENSOR TRACK (2 PLACES, 90° APART)
"C" PORT (2 PLACES)
6,75(.27")
13,5(.53")
LC
25
MODEL
BORE
x STROKE
TYPE
MOUNTING
15mm - 50mm STROKE (SEE CHART ABOVE)
OPTIONS
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE CATALOG PAGE 54 FOR DETAILS)
EM - INCH THREADS & PORT OPTIONS:
BLANK - NO CODE D - DOUBLE ROD (SEE PAGE 64 FOR DETAILS)
68
TYPE D 15,0(.59") + STK
10,0(Ø.394") X 2,5(.10") DP W
14,0(.55")
"A" + STK.
9,15 (.36")
10,5(.41")
"B" TAP THRU (2 PLACES)
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32 M4X0,7 #8-32 M6X1,0 1/4-20
MR - REAR MOUNT MS - SIDE MOUNT FR - REAR FLANGE PR - PIVOT REAR (SEE PAGE 58-60 FOR DETAILS)
HS - HIGH TEMPERATURE SEALS OPTION: (SEE CATALOG PAGE 62 FOR DETAILS) BP - BLANK TOOLING PLATE UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE CATALOG PAGE 62 FOR DETAILS)
LC 28,5mm (1-1/8") Bore Rear Mount Cylinder "MR" MODEL LC
PISTON AREA TYPE STANDARD STROKES "A" 12,7(.50") PUSH 6,41 cm² (0.99 in² ) 25,4(1.00") 38,1(1.50") _,D 38,1(1.50") PULL 5,28 cm² (0.82 in² ) 50,8(2.00") "A" + STK.
36,6(1.44") SQ.
16,0(.63")
20,2(.80")
9,15 (.36")
10,1(.40")
28,6 (1.13")
7,1(.28") (2 PLACES)
12,7(Ø.500") X 3.0(.12") DP
4,06(.16") DRILL THRU (2 PLACES)
38,1(1.50") SQ.
TYPE D 16,0(.63") + STK
4,8(.19")
6,4(.25")
10,1(.40")
.19"(4,8)
W
11,9(.47")
X
Z
28,6 (1.13")
20,2(.80")
Y
5,8(.23")
1/8-27 PORT (2 PLACES)
SENSOR TRACK
5,5(.22) DRILL THRU (2 PLACES)
3,3(.13")
1/4-20 TAP X 16,0(.63") DP (2 PLACES)
9,1(.36")
28,6 (1.13")
18,3(.72")
3,2(Ø.13") X 6,4(.25") DP (PIN LOCATOR)
Side Mount Cylinder "MS" MODEL LC
PISTON AREA TYPE STANDARD STROKES "A" 12,7(.50") PUSH 6,41 cm² (0.99 in² ) 25,4(1.00") 38,1(1.50") _,D 38,1(1.50") PULL 5,28 cm² (0.82 in² ) 50,8(2.00") 36,6(1.44") SQ. 20,2(.80")
#6-32 TAP X 3,8(.15") DP (2 PLACES)
11,2(.44")
5,8(.23")
7,1(.28")
16,7 (.66")
10,4 (.41")
LC
28,5
MODEL
BORE
X
6,4 (.25")
20,2(.80")
Y
5,5(.22") DRILL THRU (2 PLACES)
12,7(Ø.500") X 2,3(.09") DP
7,1(.28") (2 PLACES)
10,1(.40")
W Z
TYPE D 16,0(.63") + STK
9,15 (.36")
12,7(Ø.500") X 3,0(.12") DP
11,2 (.44")
11,9(.47")
16,0(.63")
10,1(.40")
4,0(.16") DRILL THRU (2 PLACES)
22,4(.88")
"A" + STK.
SENSOR TRACK
1/8-27 PORT (2 PLACES)
9,1(.36")
18,3(.72")
x STROKE
TYPE
MOUNTING
12,7(.50") - 50,8(2.00") STROKE (SEE CHART ABOVE) BLANK - NO CODE D - DOUBLE ROD (SEE PAGE 64 FOR DETAILS) MR - REAR MOUNT MS - SIDE MOUNT FR - REAR FLANGE PR - PIVOT REAR (SEE PAGE 58-60 FOR DETAILS)
OPTIONS
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE CATALOG PAGE 54 FOR DETAILS)
HS - HIGH TEMPERATURE SEALS OPTION: (SEE CATALOG PAGE 62 FOR DETAILS) BP - BLANK TOOLING PLATE UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE CATALOG PAGE 62 FOR DETAILS)
69
LC 32mm (1-1/4") Bore Rear Mount Cylinder "MR" TYPE STANDARD STROKES "A" 15mm 25mm 37,5(1.48") _,D 40mm 50mm
MODEL LC
PISTON AREA
"B" "C" "D" "E"
PUSH 8,04 cm² (1.25 in² ) PULL 6,91 cm² (1.07 in² )
TYPE D 15,0(.59") + STK
"A" + STK.
40,0(1.58") SQ.
15,0 (.59")
21,0 (.83")
42,0(1.65") SQ.
31,5 (1.24")
9,15 (.36")
10,5(.41")
Standard Threads "EM" Option M5X0,8 #10-32 G1/8 PORT 1/8-27 M6X1,0 1/4-20 M6X1,0 1/4-20
8,4(.33") (2 PLACES)
5,25(.21")
12,0(Ø.473") X 2,5(.10") DP
"B" TAP THRU (2 PLACES)
X
Z
13,5(.53")
Y
6,75(.27")
7,1(.28")
10,5(.41")
W
31,5 (1.24")
21,0(.83")
SENSOR TRACK (2 PLACES, 90° APART)
"E" TAP THRU (2 PLACES)
5,25 (.21")
"C" PORT (2 PLACES)
"D" TAP X 16,0(.63") DP (2 PLACES)
6,75(.27") 13,5(.53")
Side Mount Cylinder "MS" MODEL LC
TYPE STANDARD STROKES "A" 15mm 25mm 37,5(1.48") _,D 40mm 50mm
PISTON AREA
"B" "C" "D" "E"
PUSH 8,04 cm² (1.25 in² ) PULL 6,91 cm² (1.07 in² ) 40,0(1.58") SQ.
"B" TAP THRU (2 PLACES)
12,0(Ø.473") X 2,5(.10") DP
12,5(.49")
10,5 (.41")
W X
Z
13,5(.53")
25,0(.98")
18,2 (.72")
Y
6,75(.27") "E" TAP THRU (2 PLACES)
12,0(.47") "D" TAP X 5,8(.18") DP (4 PLACES)
8,4(.33") (2 PLACES)
9,15 (.36")
7,1(.28")
21,0(.83")
SENSOR TRACK (2 PLACES, 90° APART)
6,0(.24")
"C" PORT (2 PLACES)
6,75(.27")
13,5 (.53")
LC
32
MODEL
BORE
x STROKE
TYPE
MOUNTING
15mm - 50mm STROKE (SEE CHART ABOVE)
OPTIONS
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE CATALOG PAGE 54 FOR DETAILS)
EM - INCH THREADS & PORT OPTIONS:
BLANK - NO CODE D - DOUBLE ROD (SEE PAGE 64 FOR DETAILS)
70
15,0 (.59")
10,5(.41") 12,0 (.47")
TYPE D 15,0(.59") + STK
"A" + STK.
21,0 (.83")
10,0(Ø.394") X 2,5(.10") DP
Standard Threads "EM" Option M5X0,8 #10-32 G1/8 PORT 1/8-27 M4X0,7 #8-32 M6X1,0 1/4-20
MR - REAR MOUNT MS - SIDE MOUNT FR - REAR FLANGE PR - PIVOT REAR (SEE PAGE 58-60 FOR DETAILS)
HS - HIGH TEMPERATURE SEALS OPTION: (SEE CATALOG PAGE 62 FOR DETAILS) BP - BLANK TOOLING PLATE UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE CATALOG PAGE 62 FOR DETAILS)
LC 40mm (1-1/2") Bore Rear Mount Cylinder "MR" TYPE STANDARD STROKES "A" 15mm 25mm 45 (1.78") _,D 40mm 50mm
MODEL LC
PISTON AREA
"B" "C" "D"
PUSH 12,56 cm² (1.95 in² ) PULL 10,55 cm² (1.64 in² ) TYPE D 15,0 (.59") + STK
"A" + STK.
48,0 (1.89") SQ.
Standard Threads "EM" Option M6X1,0 1/4-20 G1/8 PORT 1/8-27 M6X1,0 1/4-20
50,0 (1.98") SQ.
15,0 (.59")
25,5 (1.00")
38,0 (1.50")
12,45 (.49")
12,75 (.50")
9,9 (.39") (2 PLACES)
6,0 (.24")
12,5 (Ø.492") X 2,5 (.10") DP
X
Z
21,0 (.83")
38,0 (1.50")
25,5 (1.00")
Y
10,5 (.41")
8,7 (.34")
12,75 (.50")
W
6,0 (.24")
SENSOR TRACK (2 PLACES, 90° APART)
"B" TAP THRU (4 PLACES)
"C" PORT (2 PLACES)
"D" TAP X 16,0 (.63") DP (2 PLACES)
10,5 (.41") 21,0 (.83")
Side Mount Cylinder "MS" MODEL LC
PISTON AREA TYPE STANDARD STROKES "A" 15mm PUSH 12,56 cm² (1.95 in² ) 25mm 45 (1.78") _,D 40mm PULL 10,55 cm² (1.64 in² ) 50mm
"B" "C" "D"
15,0 (.59")
25,5 (1.00")
9,9 (.39") (2 PLACES)
12,75 (.50") 12,0 (.47")
12,5 (Ø.492") X 2,5 (.10") DP
12,45 (.49")
15,0 (.59")
30,0 (1.18")
22,0 (.87")
"B" TAP THRU (4 PLACES)
12,0 (.47") "D" TAP X 5,8 (.20") DP (4 PLACES)
LC
40
MODEL
BORE
Y
10,5 (.41")
6,0 (.24")
X
Z
8,7 (.34")
12,75 (.50")
W 21,0 (.83")
TYPE D 15,0 (.59") + STK
"A" + STK.
48,0 (1.89") SQ. 12,0 (Ø.473") X 2,5 (.10") DP
Standard Threads "EM" Option M6X1,0 1/4-20 G1/8 PORT 1/8-27 M4X0,7 #8-32
25,5 (1.00")
SENSOR TRACK (2 PLACES, 90° APART)
"C" PORT (2 PLACES)
10,5 (.41")
21,0 (.83")
x STROKE
TYPE
MOUNTING
15mm - 50mm STROKE (SEE CHART ABOVE)
OPTIONS
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE CATALOG PAGE 54 FOR DETAILS)
EM - INCH THREADS & PORT OPTIONS:
BLANK - NO CODE D - DOUBLE ROD (SEE PAGE 64 FOR DETAILS) MR - REAR MOUNT MS - SIDE MOUNT FR - REAR FLANGE PR - PIVOT REAR (SEE PAGE 58-60 FOR DETAILS)
HS - HIGH TEMPERATURE SEALS OPTION: (SEE CATALOG PAGE 62 FOR DETAILS) BP - BLANK TOOLING PLATE UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE CATALOG PAGE 62 FOR DETAILS)
71
LC 50mm (2.0") Bore Rear Mount Cylinder "MR" PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm PUSH 19,63 cm² (3.04 in² ) 48,5(1.91") _,D 40mm PULL 17,62 cm² (2.73 in² ) 50mm 75mm
MODEL LC
"A" + STK.
61,0(2.40") SQ.
TYPE D 15,0(.59") + STK
15,0 (.59")
31,5 (1.24")
6,5(.26")
X
Z
50,0 (1.97")
31,5(1.24")
Y
12,75(.50")
6,5 (.26")
8,7(.34")
15,75(.62")
W
50,0 (1.97")
10,9(.43") (2 PLACES)
16,0(Ø.631") X 2,5(.10") DP
"B" TAP THRU (2 PLACES)
Standard Threads "EM" Option M6X1,0 1/4-20 G1/8 PORT 1/8-27 M8X1,25 5/16-18 M8X1,25 5/16-18
63,0(2.48") SQ.
12,45 (.49")
15,75(.62")
25,5(1.00")
"B" "C" "D" "E"
SENSOR TRACK (2 PLACES, 90° APART)
"E" TAP THRU (2 PLACES)
"C" PORT (2 PLACES)
"D" TAP X 20,1(.79") DP (2 PLACES)
12,75(.50") 25,5(1.00")
Side Mount Cylinder "MS" MODEL LC
PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm PUSH 19,63 cm² (3.04 in² ) 48,5(1.91") _,D 40mm PULL 17,62 cm² (2.73 in² ) 50mm 75mm
"B" "C" "D" "E"
61,0(2.40") SQ. 31,5 (1.24")
16,0(Ø.631") X 3,0(.12") DP
"B" TAP THRU (2 PLACES)
25,5 (1.00")
Y
12,75(.50")
8,0 (.32")
X
Z
"E" TAP THRU (2 PLACES)
16,0 (.63")
8,7(.34")
15,75(.62")
W
32,0 (1.26")
TYPE D 15,0(.59") + STK
10,9(.43") (2 PLACES)
16,0(Ø.630") X 2,5(.10") DP
16,0(.63")
30,0 (1.18")
"A" + STK.
12,45 (.49")
15,75(.62") 18,0 (.71")
31,5 (1.24")
SENSOR TRACK (2 PLACES, 90° APART)
"C" PORT (2 PLACES)
12,75(.50")
"D" TAP X 7,1(.28") DP (4 PLACES)
25,5(1.00")
LC
50
MODEL
BORE
x STROKE
TYPE
MOUNTING
15mm - 75mm STROKE (SEE CHART ABOVE)
OPTIONS
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE CATALOG PAGE 54 FOR DETAILS)
EM - INCH THREADS & PORT OPTIONS:
BLANK - NO CODE D - DOUBLE ROD (SEE PAGE 64 FOR DETAILS)
72
15,0 (.59")
Standard Threads "EM" Option M6X1,0 1/4-20 G1/8 PORT 1/8-27 M5X0,8 #10-32 M8X1,25 5/16-18
MR - REAR MOUNT MS - SIDE MOUNT FR - REAR FLANGE PR - PIVOT REAR (SEE PAGE 58-60 FOR DETAILS)
HS - HIGH TEMPERATURE SEALS OPTION: (SEE CATALOG PAGE 62 FOR DETAILS) BP - BLANK TOOLING PLATE UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE CATALOG PAGE 62 FOR DETAILS)
LC 63mm (2-1/2") Bore Rear Mount Cylinder "MR" PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm PUSH 31,17 cm² (4.83 in² ) 57,0(2.25") _,D 40mm PULL 28,03 cm² (4.34 in² ) 50mm 75mm
MODEL LC
"B" "C" "D"
"A" + STK.
74,0(2.91") SQ.
TYPE D 15,0(.59") + STK
15,0 (.59")
38,0 (1.50")
12,45 (.49")
19,0(.75")
X
60,0 (2.36") 8,0 (.32") 8,0 (.32")
60,0 (2.36")
38,0(1.50")
Y
15,75(.62")
76,0(2.99") SQ.
22,0(.87")
19,0(.75")
Z
31,5(1.24")
6,0 (.24")
12,7(.50") (2 PLACES)
22,0(Ø.866") X 2,5(.10") DP
W
Standard Threads "EM" Option M8X1,25 5/16-18 G1/8 PORT 1/8-27 M10X1,5 3/8-24
SENSOR TRACK (2 PLACES, 90° APART)
"B" TAP THRU (4 PLACES)
"C" PORT (2 PLACES) "D" TAP X 23,9(.94") DP (2 PLACES)
15,75(.62") 31,5(1.24")
Side Mount Cylinder "MS" MODEL LC
PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm PUSH 31,17 cm² (4.83 in² ) 57,0(2.25") _,D 40mm PULL 28,03 cm² (4.34 in² ) 50mm 75mm
"B" "C" "D"
Standard Threads "EM" Option M8X1,25 5/16-18 G1/8 PORT 1/8-27 M5X0,8 #10-32
"A" + STK. 74,0(2.91") SQ. 38,0 (1.50")
20,0(Ø.788") X 3,0(.12") DP
12,45 (.49")
19,0(.75") 25,0 (.98")
TYPE D 15,0(.59") + STK
15,0 (.59")
12,7(.50") (2 PLACES)
22,0(Ø.866") X 2,5(.10") DP 20,0(.79")
40,0 (1.57")
38,0 (1.50")
31,5 (1.24")
Y
15,75(.62")
12,5 (.49")
"B" TAP THRU (4 PLACES)
25,0 (.98")
38,0 (1.50")
X
Z
22,0(.87")
19,0(.75")
W
SENSOR TRACK (2 PLACES, 90° APART)
"C" PORT (2 PLACES)
15,75(.62")
"D" TAP X 8,6(.34") DP (4 PLACES)
31,5(1.24")
LC
63
MODEL
BORE
x STROKE
TYPE
MOUNTING
15mm - 75mm STROKE (SEE CHART ABOVE)
OPTIONS
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE CATALOG PAGE 54 FOR DETAILS)
EM - INCH THREADS & PORT OPTIONS:
BLANK - NO CODE D - DOUBLE ROD (SEE PAGE 64 FOR DETAILS) MR - REAR MOUNT MS - SIDE MOUNT FR - REAR FLANGE PR - PIVOT REAR (SEE PAGE 58-60 FOR DETAILS)
HS - HIGH TEMPERATURE SEALS OPTION: (SEE CATALOG PAGE 62 FOR DETAILS) BP - BLANK TOOLING PLATE UB, UF, UR - URETHANE SHOCK PAD OPTION (SEE CATALOG PAGE 62 FOR DETAILS)
73
High strength threaded connection
Low friction cup sealintegral rod wiper
Double wound 302 SS retaining wire
Low friction figure 8 piston seal
60,000 PSI tensile strength electro-less nickel rod bearing
Magnetic piston, available
Hard chrome plated 100,000 PSI yield strength rod
Machined bore anodized aluminum housing
Zinc plated dust cover
SC SERIES STOPPER CYLINDERS
SC SERIES
Common Features Nason’s SC series stopper cylinders were designed for today’s demanding conveyor systems. With more power in a smaller package, the SC series stopper cylinder is offered in seven different mounting styles with three different rod end configurations to fit into almost any design situation. Compact Size Nason’s SC series cylinders were designed with todays conveyor systems in mind. Five bore sizes with a variety of strokes and rod end options ensure a perfect fit for each application. Nason is able to fit a larger bore size into the same package as comparable competitive products.
Rugged Construction The SC series incorporates 60,000 PSI tensile strength bearings with an oversized 100,000 PSI yield strength rod for maximum stopping power. Versatile Design The SC series stopper cylinders are metric in design (bore & rod size). They are offered in inch or metric mounting and porting. Five different threaded mounting options and two different flange mounting options ensure an exact fit into today’s tight space requirements. Due to their 100% machined design they are easily customized by Nason. Rebuildable All SC series cylinders are field rebuidable.
How to Order
How to Order Example: Part Number:SC-32X15WFS-EMHS SC
32
MODEL
BORE
x
FS
W
15 STROKE
EM
MOUNTING
ROD STYLE
HS OPTIONS
MAGNETIC
MOUNTING
MODEL
SC - Stopper Cylinder
MF - Threads on Front Face (Rod End) MR - Threads on Rear Face (Opposite Rod) MB - Threads on Both Faces
BORE 20 - 20mm (.79") 25 - 25mm (.98")
MT - Drilled Through and Counterbored for Bolt Clearance MS - Threads on Side of Cylinder Body
32 - 32mm (1.26")
FR - Flange on Rear Face (Opposite Rod)
40 - 40mm (1.58")
FS - Flange on Side of Cylinder Body
50 - 50mm (1.97")
STROKE 20mm Bore 25mm Bore
32mm Bore 40mm Bore
50mm Bore
MAGNETIC 10 - 10mm Stroke
BLANK (No Code) - Standard "NO MAGNET" Piston
15 - 15mm Stroke
M - Magnetic Piston and Sensor Mounting
10 - 10mm Stroke 15 - 15mm Stroke 20 - 20mm Stroke 10 - 10mm Stroke 15 - 15mm Stroke 20 - 20mm Stroke 20 - 20mm Stroke 25 - 25mm Stroke 30 - 30mm Stroke 20 - 20mm Stroke 25 - 25mm Stroke 30 - 30mm Stroke
OPTIONS
EM - InchThreads (Mounting and Ports)
HS - High Temperature Seals -10°C to 150°C (0°F to 302°F) UR - Urethane Shock Pad Rear (Opposite Rod)
ROD STYLE BLANK (No Code) - Round Rod F - Flat Rod W - Flat Rod with Roller
75
Engineering Data
Operating Media:
Air (Clean, Dry or Lubricated)
Maximum Operating Pressure:
17 Bar (250 PSI)
Operating Temperature:
-10∞C to 95∞C (0∞F to 200∞F)
Packing:
Buna N
Lubrication:
PTFE impregnated grease
Stroke Tolerance:
+1,0mm/-0mm (+0.04"/-0")
Unit Weights kg (lbs) BORE 20 25 32
STROKE 10
15
20
0.15
0.16
(.34)
(.36)
0.21
0.23
0.24
(.47)
(.50)
(.53)
0.43
0.45
0.48
(.94)
(1.0)
(1.06)
0.74
40
(1.67)
50
25
0.79 (1.75)
30
0.83
(1.83)
1.10
1.15
1.19
(2.43)
(2.53)
(2.63)
Operating Ranges
Minimum Operating Pressure for Load 10 (145)
10 (22)
2 SC
-3
-20
SC-25 SC-20
5 (11) 4 (8.8)
5
7 (101.5)
0
-4
-2
20 (44) 15 (33)
SC
8 (116) SC-32
SC
SC
30 (66) 25 (55)
9 (130.5)
SC-40
Pressure - Bar (PSI)
Weight - kilograms (pounds)
55 (121) 45 (99)
SC-50
6 (87) 5 (72.5)
-50
SC
4 (58) 3 (43.5)
3 (6.6) 2 (29)
2 (4.4)
1 (14.5) 1 (2.2)
1 (3.3)
5 (16.5)
10 15 20 (33) (49.5) (66)
Speed - meters/minute (feet/minute)
76
0
10 (22)
20 (44)
30 (66)
40 (88)
50 (110)
60 (132)
Lateral load - kilograms (pounds)
70 (154)
80 (176)
SC 20mm (3/4") Bore
Non Magnetic Front Mount Cylinder "MF" PISTON AREA MODEL STANDARD STROKES "A" 2 2 10mm PUSH 3,14 cm (0.48 in ) SC 38,0 (1.50") 2 2 15mm PULL 2,32 cm (0.36 in )
18,0 (.71")
30,0 SQ. (1.181")
4,5 (.18")
"A" + STROKE 21,0 (.83")
21,0 (.83")
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32
"B" "C"
6,9 (.27") 5,6 (.22")
4,5 (.18")
Rear Mount Cylinder "MR"
W
21,0 (.83")
Z
Z
X
ÿ 20,0 (.79")
X
W
Y
Mount Both End Cylinder "MB" W
Y
"C" TAP X 11 (.44") DP (2 PLACES)
"B" PORT (2 PLACES)
10,0 (ÿ .394) ROD (ROD FLUSH WITH FACE)
Z
X
Y
Non Magnetic Thru Mount Cylinder "MT" PISTON AREA MODEL STANDARD STROKES "A" 2 2 10mm PUSH 3,14 cm (0.48 in ) SC 38,0 (1.50") 2 2 15mm PULL 2,32 cm (0.36 in ) 30,0 SQ. (1.181")
18,0 (.71")
21,0 (.83")
4,5 (.18") 4,5 (.18")
"B"
Standard Threads "EM" Option M5X0,8 #10-32
"A" + STROKE 21,0 (.83")
6,9 (.27") 5,6 (.22")
W
21,0 (.83")
Z
ÿ 20,0 (.79")
X
10,0 (ÿ .394) ROD (ROD FLUSH WITH FACE)
Y
SC
20
MODEL
BORE
4,2 (ÿ .165") DRILL THRU 7,6 (ÿ .30") C'BORE X 4,5 (.18") DP (2 PLACES, OPPOSITE FACE)
"B" PORT (2 PLACES)
x STROKE
ROD STYLE
10 - 10mm STROKE 15 - 15mm STROKE
MOUNTING
OPTIONS
EM - INCH THREADS & PORTS HS - HIGH TEMP SEALS (SEE PAGE 62) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
BLANK (NO CODE) - ROUND ROD (SHOWN) F - FLAT ROD (SEE PAGE 92) W - FLAT ROD WITH ROLLER (SEE PAGE 92) MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93)
77
SC 20mm (3/4") Bore Magnetic Front Mount Cylinder "MF" PISTON AREA MODEL STANDARD STROKES "A" 2 2 10mm PUSH 3,14 cm (0.48 in ) SC 38,0 (1.50") 2 2 15mm PULL 2,32 cm (0.36 in ) 18,0 (.71")
30,0 SQ. (1.181") 21,0 (.83")
4,5 (.18")
4,5 (.18")
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32
"B" "C"
"A" + STROKE 21,0 (.83")
SENSOR SLOT (2 PLACES, 180° APART)
6,9 (.27") 5,6 (.22")
Rear Mount Cylinder "MR"
W
21,0 (.83")
Z
Z
X
Ø20,0 (.79")
X
W
Mount Both End Cylinder "MB"
Y
W
Y
"C" TAP X 12,7 (.50") DP (2 PLACES)
"B" PORT (2 PLACES)
10,0 (Ø.394) ROD (ROD FLUSH WITH FACE)
Z
X
Y
Magnetic Thru Mount Cylinder "MT"
PISTON AREA MODEL STANDARD STROKES "A" 2 2 10mm PUSH 3,14 cm (0.48 in ) SC 38,0 (1.50") 2 2 15mm PULL 2,32 cm (0.36 in ) 30,0 SQ. (1.181")
18,0 (.71")
21,0 (.83")
4,5 (.18")
4,5 (.18")
Standard Threads "EM" Option M5X0,8 #10-32
"A" + STROKE 21,0 (.83")
SENSOR SLOT (2 PLACES, 180° APART
6,9 (.27") 5,6 (.22")
W
21,0 (.83")
Z
Ø20,0 (.79")
X
10,0 (Ø.394) ROD (ROD FLUSH WITH FACE)
Y
SC
20
MODEL
BORE
4,2 (Ø.165") DRILL THRU 7,6 (Ø.30") C'BORE X 4,5(.18") DP (2 PLACES, OPPOSITE FACE)
x
"B" PORT (2 PLACES)
M STROKE
ROD STYLE
10 - 10mm STROKE 15 - 15mm STROKE
BLANK (NO CODE) - ROUND ROD (SHOWN) F - FLAT ROD (SEE PAGE 92) W - FLAT ROD WITH ROLLER (SEE PAGE 92)
78
"B"
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS)
MOUNTING MAGNETIC
OPTIONS
EM - INCH THREADS & PORTS HS - HIGH TEMP SEALS (SEE PAGE 62) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93)
SC 20mm (3/4") Bore Non Magnetic Side Mount Cylinder "MS"
PISTON AREA MODEL STANDARD STROKES "A" 2 2 10mm PUSH 3,14 cm (0.48 in ) SC 38,0 (1.50") 2 2 15mm PULL 2,32 cm (0.36 in )
10,0 (.39")
"B" "C" 18,0 (.71")
30,0 SQ. (1.181")
20,0 (.79)
4,5 (.18")
Standard Threads "EM" Option M5X0,8 #10-32 M4X0,7 #8-32 "A" + STROKE 21,0 (.83")
6,9 (.27") 5,6 (.22")
W
21,0 (.83")
Z
X
Ø20,0 (.79")
Y "C" TAP X 6,1 (.24") DP. (4 PLACES)
"B" PORT (2 PLACES)
10,0 (Ø.394) ROD (ROD FLUSH WITH FACE)
Magnetic Side Mount Cylinder "MS" PISTON AREA MODEL STANDARD STROKES "A" 2 2 10mm PUSH 3,14 cm (0.48 in ) SC 38,0 (1.50") 2 2 15mm PULL 2,32 cm (0.36 in )
SENSOR SLOT (2 PLACES, 180° APART) 10,0 (.39")
"B" "C"
18,0 (.71")
30,0 SQ. (1.181")
20,0 (.79)
4,5 (.18")
Standard Threads "EM" Option #10-32 M5X0,8 M4X0,7 #8-32
"A" + STROKE 21,0 (.83")
6,9 (.27") 5,6 (.22")
W
21,0 (.83")
Z
X
Y "C" TAP X 6,1 (.24") DP. (4 PLACES)
SC
20
MODEL
BORE
Ø20,0 (.79")
"B" PORT (2 PLACES)
10,0 (Ø.394) ROD (ROD FLUSH WITH FACE)
x STROKE
ROD STYLE
10 - 10mm STROKE 15 - 15mm STROKE
MS - SIDE THREADS FS - SIDE FLANGES (SEE PAGE 93)
BLANK (NO CODE) - ROUND ROD (SHOWN) F - FLAT ROD (SEE PAGE 92) W - FLAT ROD WITH ROLLER (SEE PAGE 92)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS)
MOUNTING MAGNETIC
OPTIONS
EM - INCH THREADS & PORTS HS - HIGH TEMP SEALS (SEE PAGE 62) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
BLANK (NO CODE) - STANDARD "NO MAGNET" PISTON M - MAGNETIC PISTON AND SENSOR MOUNTING SLOTS
79
SC 25mm (1.0") Bore Non Magnetic Front Mount Cylinder "MF" PISTON AREA MODEL STANDARD STROKES "A" 2 2 10mm PUSH 4,91 cm (0.76 in ) SC 15mm 38,0 (1.50") 2 2 PULL 3,81 cm (0.59 in ) 20mm 22,0 (.87")
35,0 SQ. (1.378")
4,75 (.19")
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32
"A" + STROKE
25,4 (1.00")
4,75 (.19")
"B" "C"
20,8 (.82")
6,9 (.27") 6,1 (.24")
W
Rear Mount Cylinder "MR"
25,4 (1.00")
Z
X
Ø24,0 (.95")
W
Z
X
Y
Mount Both End Cylinder "MB"
Y
12,0 (Ø.472) ROD (ROD FLUSH WITH FACE)
W
"B" PORT (2 PLACES)
"C" TAP X 12,7 (.50") DP (2 PLACES)
Z
X
Y
Non Magnetic Thru Mount Cylinder "MT" PISTON AREA MODEL STANDARD STROKES "A" 2 2 10mm PUSH 4,91 cm (.76 in ) 15mm SC 38,0 (1.50") 2 2 PULL 3,81 cm (.59 in ) 20mm 35,0 SQ. (1.378")
"B"
22,0 (.87")
25,4 (1.00")
4,75 (.19") 4,75 (.19")
Standard Threads "EM" Option M5X0,8 #10-32
"A" + STROKE 20,8 (.82")
6,9 (.27") 6,1 (.24")
W
25,4 (1.00")
Z
X
12,0 (Ø.472) ROD (ROD FLUSH WITH FACE)
SC
25
MODEL
BORE
Ø24,0 (.95")
Y
"B" PORT (2 PLACES)
4,2 (Ø.165") DRILL THRU 7,6 (Ø.30") C'BORE X 4,5 (.18") DP (2 PLACES, OPPOSITE FACE)
x STROKE
ROD STYLE
10 - 10mm STROKE 15 - 15mm STROKE 20 - 20mm STROKE
MOUNTING
OPTIONS
EM - INCH THREADS & PORTS HS - HIGH TEMP SEALS (SEE PAGE 62) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
BLANK (NO CODE) - ROUND ROD (SHOWN) F - FLAT ROD (SEE PAGE 92) W - FLAT ROD WITH ROLLER (SEE PAGE 92)
80
MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93)
SC 25mm (1.0") Bore Magnetic Front Mount Cylinder "MF" PISTON AREA MODEL STANDARD STROKES "A" 2 2 10mm PUSH 4,91 cm (0.76 in ) SC 15mm 38,0 (1.50") 2 2 PULL 3,81 cm (0.59 in ) 20mm 22,0 (.87")
35,0 SQ. (1.378")
4,75 (.19")
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32
"A" + STROKE
25,4 (1.00")
4,75 (.19")
"B" "C"
20,7 (.82")
6,9 (.27") 6,1 (.24")
W
Rear Mount Cylinder "MR"
25,4 (1.00")
Z
Ø24 (.95")
X
W
Z
X
Y
12,0 (Ø.472) ROD (ROD FLUSH WITH FACE)
Mount Both End Cylinder "MB"
Y
"C" TAP X 12,7 (.50") DP (2 PLACES)
W
"B" PORT (2 PLACES) Z
SENSOR SLOT (2 PLACES, 180° APART)
X
Y
Magnetic Thru Mount Cylinder "MT" PISTON AREA MODEL STANDARD STROKES "A" 2 2 10mm PUSH 4,91 cm (.76 in ) 15mm SC 38,0 (1.50") 2 2 PULL 3,81 cm (.59 in ) 20mm
"B"
22,0 (.87")
35,0 SQ. (1.378") 25,4 (1.00")
4,75 (.19")
4,75 (.19")
Z
"A" + STROKE 20,7 (.82")
SENSOR SLOT (2 PLACES, 180° APART)
W
25,4 (1.00")
Standard Threads "EM" Option M5X0,8 #10-32
6,1 (.24")
Ø24,0 (.95")
X
Y
12,0 (Ø.472) ROD (ROD FLUSH WITH FACE)
"B" PORT (2 PLACES)
4,2 (Ø.165") DRILL THRU 7,6 (Ø.30") C'BORE X 4,5(.18") DP (2 PLACES, OPPOSITE FACE)
SC
25
MODEL
BORE
6,9 (.27")
x
M STROKE
ROD STYLE
10 - 10mm STROKE 15 - 15mm STROKE 20 - 20mm STROKE BLANK (NO CODE) - ROUND ROD (SHOWN) F - FLAT ROD (SEE PAGE 92) W - FLAT ROD WITH ROLLER (SEE PAGE 92)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS)
MOUNTING MAGNETIC
OPTIONS
EM - INCH THREADS & PORTS HS - HIGH TEMP SEALS (SEE PAGE 62) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93)
81
SC 25mm (1.0") Bore
Non Magnetic Side Mount Cylinder "MS" PISTON AREA MODEL STANDARD STROKES "A" 2 2 10mm PUSH 4,91 cm (0.76 in ) SC 15mm 38,0 (1.50") 2 2 PULL 3,81 cm (0.59 in ) 20mm
10,0 (.39")
"B" "C" 22,0 (.87")
35,0 SQ. (1.378")
20,0 (.79")
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32 "A" + STROKE 6,9 (.27")
20,8 (.82")
6,1 (.24")
W
4,75 (.19")
25,4 (1.00")
Z
X
Ø24,0 (.95")
Y
"B" PORT (2 PLACES)
12,0 (Ø.472) ROD (ROD FLUSH WITH FACE)
"C" TAP X 7,6 (.30") DP (4 PLACES)
Magnetic Side Mount Cylinder "MS" PISTON AREA MODEL STANDARD STROKES "A" 2 2 10mm PUSH 4,91 cm (0.76 in ) SC 15mm 38,0 (1.50") 2 2 PULL 3,81 cm (0.59 in ) 20mm
10,0 (.39")
"B" "C" 22,0 (.87")
35,0 SQ. (1.378")
20,0 (.79")
Standard Threads "EM" Option M5X0,8 #10-32 M5X0,8 #10-32 "A" + STROKE 6,9 (.27")
20,8 (.82")
6,1 (.24")
W
4,75 (.19")
25,5 (1.00")
Z
X
Ø24,0(.95")
Y "C" TAP X 7,6 (.30") DP (4 PLACES)
"B" PORT (2 PLACES)
SENSOR SLOT (2 PLACES, 180° APART) 12,0 (Ø.472) ROD (ROD FLUSH WITH FACE)
SC
25
MODEL
BORE
x STROKE
ROD STYLE
10 - 10mm STROKE 15 - 15mm STROKE 20 - 20mm STROKE
MS - SIDE THREADS FS - SIDE FLANGES (SEE PAGE 93)
BLANK (NO CODE) - ROUND ROD (SHOWN) F - FLAT ROD (SEE PAGE 92) W - FLAT ROD WITH ROLLER (SEE PAGE 92)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS)
82
MOUNTING MAGNETIC
OPTIONS
EM - INCH THREADS & PORTS HS - HIGH TEMP SEALS (SEE PAGE 62) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
BLANK (NO CODE) - STANDARD "NO MAGNET" PISTON M - MAGNETIC PISTON AND SENSOR MOUNTING SLOTS
SC 32mm (1-1/4") Bore
Non Magnetic Front Mount Cylinder "MF" PISTON AREA MODEL STANDARD STROKES "A" 2 2 10mm PUSH 8,04 cm (1.25 in ) SC 15mm 44,0 (1.73") 2 2 PULL 4,91 cm (0.76 in ) 20mm 20,0 (.79")
42,0 SQ. (1.654")
4,4 (.17")
31,5 (1.24")
5,3 (.21")
5,3 (.21")
"B" "C"
Standard Threads "EM" Option G 1/8 PORT 1/8-27 M6X1,0 1/4-20
"A" + STROKE 25,1 (.99")
8,4 (.33") 7,1 (.28")
W
Rear Mount Cylinder "MR" 31,5 (1.24")
ÿ 36,0 (1.42")
X
Z
W
X
Z
Y
Y
Mount Both End Cylinder "MB"
"C" TAP X 16,0 (.63") DP (2 PLACES)
20,0 (ÿ .787) ROD (ROD FLUSH WITH FACE)
W
"B" PORT (2 PLACES)
X
Z
Y
Non Magnetic Thru Mount Cylinder "MT" PISTON AREA MODEL STANDARD STROKES "A" 2 2 10mm PUSH 8,04 cm (1.25 in ) SC 15mm 44,0 (1.73") 2 2 PULL 4,91 cm (0.76 in ) 20mm 42,0 SQ. (1.654")
5,3 (.21")
31,5 (1.24")
Standard Threads "EM" Option G 1/8 PORT 1/8-27
20,0 (.79")
4,4 (.17")
31,5 (1.24")
5,3 (.21")
"B"
"A" + STROKE 25,1 (.99")
8,4 (.33") 7,1 (.28")
W
ÿ 36,0 (1.42")
X
Z
Y
SC
32
MODEL
BORE
"B" PORT (2 PLACES)
5,2 (ÿ .204") DRILL THRU 8,6 (ÿ .34") C'BORE X 5,6 (.22") DP (2 PLACES, OPPOSITE FACE)
20,0 (ÿ .787) ROD (ROD FLUSH WITH FACE)
x STROKE
ROD STYLE
10 - 10mm STROKE 15 - 15mm STROKE 20 - 20mm STROKE
MOUNTING
OPTIONS
EM - INCH THREADS & PORTS HS - HIGH TEMP SEALS (SEE PAGE 62) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
BLANK (NO CODE) - ROUND ROD (SHOWN) F - FLAT ROD (SEE PAGE 92) W - FLAT ROD WITH ROLLER (SEE PAGE 92) MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93)
83
SC 32mm (1-1/4") Bore Magnetic Front Mount Cylinder "MF" PISTON AREA MODEL STANDARD STROKES "A" 2 2 10mm PUSH 8,04 cm (1.25 in ) SC 15mm 44,0 (1.73") 2 2 PULL 4,91 cm (0.76 in ) 20mm 42,0 SQ. (1.654")
20,0 (.79") 4,4 (.17")
31,5 (1.24")
5,3 (.21")
5,3 (.21")
"B" "C"
Standard Threads "EM" Option G 1/8 PORT 1/8-27 M6X1,0 1/4-20
"A" + STROKE 25,1 (.99")
8,4 (.33") 7,1 (.28")
W
Rear Mount Cylinder "MR"
31,5 (1.24")
Ø36,0 (1.42")
X
Z
W
X
Z
Y
Y
Mount Both End Cylinder "MB"
"C" TAP X 16,0 (.63") DP (2 PLACES)
20,0 (Ø.787) ROD (ROD FLUSH WITH FACE)
W
"B" PORT (2 PLACES)
SENSOR SLOT (2 PLACES. 180° APART)
X
Z
Y
Magnetic Thru Mount Cylinder "MT" PISTON AREA MODEL STANDARD STROKES "A" 2 2 10mm PUSH 8,04 cm (1.25 in ) SC 15mm 44,0 (1.73) 2 2 PULL 4,91 cm (0.76 in ) 20mm 42,0 (1.654") SQ.
5,3 (.21")
31,5 (1.24")
8,4 (.33") 7,1 (.28")
Ø36,0 (1.42")
X
Z
"A" + STROKE 25,1 (.99")
SENSOR SLOT (2 PLACES. 180° APART)
W
Standard Threads "EM" Option G 1/8 PORT 1/8-27
20,0 (.79")
4,4 (.17")
31,5 (1.24")
5,3 (.21")
"B"
Y 5,2 (Ø.204") DRILL THRU 8,6 (Ø.34") C'BORE X 5,6 (.22") DP (2 PLACES, OPPOSITE FACE)
20,0 (Ø.787) ROD (ROD FLUSH WITH FACE)
SC
32
MODEL
BORE
x
M STROKE
ROD STYLE
10 - 10mm STROKE 15 - 15mm STROKE 20 - 20mm STROKE BLANK (NO CODE) - ROUND ROD (SHOWN) F - FLAT ROD (SEE PAGE 92) W - FLAT ROD WITH ROLLER (SEE PAGE 92)
84
"B" PORT (2 PLACES)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS)
MOUNTING MAGNETIC
OPTIONS
EM - INCH THREADS & PORTS HS - HIGH TEMP SEALS (SEE PAGE 62) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93)
SC 32mm (1-1/4") Bore Non Magnetic Side Mount Cylinder "MS" PISTON AREA MODEL STANDARD STROKES "A" 2 2 10mm PUSH 8,04 cm (1.25 in ) SC 15mm 44,0 (1.73") 2 2 PULL 4,91 cm (0.76 in ) 20mm
"B" "C"
Standard Threads "EM" Option G 1/8 PORT 1/8-27 M5X0,8 #10-32
20,0 (.79") 12,0 (.47")
15,5 (.61")
42,0 SQ. (1.654") 5,3 (.21")
31,5 (1.24")
"A" + STROKE 25,1 (.99")
4,4 (.17")
8,4 (.33") 7,1 (.28")
W
Ø36,0 (1.42")
X
Z
Y "C" TAP X 8,0 (.32") DP (4 PLACES)
"B" PORT (2 PLACES)
20,0 (Ø.787) ROD (ROD FLUSH WITH FACE)
Magnetic Side Mount Cylinder "MS" PISTON AREA MODEL STANDARD STROKES "A" 2 2 10mm PUSH 8,04 cm (1.25 in ) SC 15mm 44,0 (1.73") 2 2 PULL 4,91 cm (0.76 in ) 20mm
12,0 (.47")
15,5 (.61")
"B" "C" 20,0 (.79")
42,0 SQ. (1.654") 5,3 (.21")
31,5 (1.24")
Standard Threads "EM" Option G 1/8 PORT 1/8-27 M5X0,8 #10-32 "A" + STROKE 25,1 (.99")
4,4 (.17")
8,4 (.33") 7,1 (.28")
W
X
Z
Ø36,0 (1.42")
Y "C" TAP X 8,0 (.32") DP (4 PLACES)
SC
32
MODEL
BORE
20,0 (Ø.787) ROD (ROD FLUSH WITH FACE)
SENSOR SLOT (2 PLACES. 180° APART)
"B" PORT (2 PLACES)
x STROKE
ROD STYLE
10 - 10mm STROKE 15 - 15mm STROKE 20 - 20mm STROKE
MS - SIDE THREADS FS - SIDE FLANGES (SEE PAGE 93)
BLANK (NO CODE) - ROUND ROD (SHOWN) F - FLAT ROD (SEE PAGE 92) W - FLAT ROD WITH ROLLER (SEE PAGE 92)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS)
MOUNTING MAGNETIC
OPTIONS
EM - INCH THREADS & PORTS HS - HIGH TEMP SEALS (SEE PAGE 62) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
BLANK (NO CODE) - STANDARD "NO MAGNET" PISTON M - MAGNETIC PISTON AND SENSOR MOUNTING SLOTS
85
SC 40mm (1-1/2") Bore Non Magnetic Front Mount Cylinder "MF" PISTON AREA MODEL STANDARD STROKES "A" 2 2 20mm PUSH 12,56 cm (1.95 in ) SC 25mm 47,0 (1.85") 2 2 PULL 9,42 cm (1.46 in ) 30mm
28,0 (1.10")
50,0 SQ. (1.968")
3,6 (.14")
38,0 (1.50")
6,0 (.24")
"B" "C"
"A" + STROKE 26,4 (1.04")
9,9 (.39") 8,7 (.34")
6,0 (.24")
W
38,0 (1.50")
Standard Threads "EM" Option G 1/8 PORT 1/8-27 M6X1,0 1/4-20
Rear Mount Cylinder "MR"
X
Ø44,0 (1.73")
X
Z
W
Z
Y
Mount Both End Cylinder "MB"
Y
W
"C" TAP X 15,2(.60") DP (2 PLACES)
25.0(Ø.984") ROD (ROD FLUSH WITH FACE)
"B" PORT (2 PLACES) X
Z
Y
Non Magnetic Thru Mount Cylinder "MT" PISTON AREA MODEL STANDARD STROKES "A" 2 2 20mm PUSH 12,56 cm (1.95 in ) SC 25mm 47,0 (1.85") 2 2 PULL 9,42 cm (1.46 in ) 30mm 50,0 SQ. (1.968")
6,0 (.24")
6,0 (.24")
28,0 (1.10")
3,6 (.14")
38,0 (1.50")
"B"
Standard Threads "EM" Option G 1/8 PORT 1/8-27
"A" + STROKE 26,4 (1.04")
9,9 (.39") 8,7 (.34")
W
38,0 (1.50")
Ø44,0 (1.73")
X
Z
Y
5,2 (Ø.204") DRILL THRU 8,6 (Ø.34") C'BORE X 5,6(.22") DP (2 PLACES, OPPOSITE FACE)
25.0 (Ø.984") ROD (ROD FLUSH WITH FACE)
SC
40
MODEL
BORE
"B" PORT (2 PLACES)
x STROKE
ROD STYLE
20 - 20mm STROKE 25 - 25mm STROKE 30 - 30mm STROKE
MOUNTING
OPTIONS
EM - INCH THREADS & PORTS HS - HIGH TEMP SEALS (SEE PAGE 62) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
BLANK (NO CODE) - ROUND ROD (SHOWN) F - FLAT ROD (SEE PAGE 92) W - FLAT ROD WITH ROLLER (SEE PAGE 92)
86
MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93)
SC 40mm (1-1/2") Bore Magnetic Front Mount Cylinder "MF" PISTON AREA MODEL STANDARD STROKES "A" 2 2 20mm PUSH 12,56 cm (1.95 in ) SC 25mm 47,0 (1.85") 2 2 PULL 9,42 cm (1.46 in ) 30mm 28,0 (1.10")
50,0 SQ. (1.968")
3,6 (.14")
38,1 (1.50")
6,0 (.24")
6,0 (.24")
"A" + STROKE 26,4 (1.04")
9,9 (.39") 8,7 (.34")
W
38,0 (1.50")
Standard Threads "EM" Option G 1/8 PORT 1/8-27 M6X1,0 1/4-20
"B" "C"
Rear Mount Cylinder "MR" Ø44,0 (1.73")
X
Z
W
X
Z
Y
Y
Mount Both End Cylinder "MB"
"C" TAP X 15,2 (.60") DP (2 PLACES)
25.0 (Ø.984") ROD (ROD FLUSH WITH FACE)
W
"B" PORT (2 PLACES)
SENSOR SLOT (2 PLACES. 180° APART)
X
Z
Y
Magnetic Thru Mount Cylinder "MT" PISTON AREA MODEL STANDARD STROKES "A" 2 2 20mm PUSH 12,56 cm (1.95 in ) SC 25mm 47,0 (1.85") 2 2 PULL 9,42 cm (1.46 in ) 30mm 3,6 (.14")
38,0 (1.50")
6,0 (.24")
Standard Threads "EM" Option G 1/8 PORT 1/8-27
28,0 (1.10")
50,0 SQ. (1.968")
6,0 (.24")
"B"
"A" + STROKE 26,4 (1.04")
9,9 (.39")
SENSOR SLOT (2 PLACES. 180° APART)
8,7 (.34")
W
38,0 (1.50")
Ø44,0 (1.73")
X
Z
Y
5,2 (Ø.204") DRILL THRU 8,6 (Ø.34") C'BORE X 5,6 (.22") DP (2 PLACES, OPPOSITE FACE)
25.0 (Ø.984") ROD (ROD FLUSH WITH FACE)
SC
40
MODEL
BORE
x
"B" PORT (2 PLACES)
M STROKE
ROD STYLE
20 - 20mm STROKE 25 - 25mm STROKE 30 - 30mm STROKE BLANK (NO CODE) - ROUND ROD (SHOWN) F - FLAT ROD (SEE PAGE 92) W - FLAT ROD WITH ROLLER (SEE PAGE 92)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS)
MOUNTING MAGNETIC
OPTIONS
EM - INCH THREADS & PORTS HS - HIGH TEMP SEALS (SEE PAGE 62) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93)
87
SC 40mm (1-1/2") Bore Non Magnetic Side Mount Cylinder "MS" PISTON AREA MODEL STANDARD STROKES "A" 2 2 20mm PUSH 12,56 cm (1.95 in ) SC 25mm 47,0 (1.85") 2 2 PULL 9,42 cm (1.46 in ) 30mm
"B" "C" 28,0 (1.10")
50,0 SQ. (1.968") 12,0 (.47")
25,0 (.98")
"A" + STROKE 26,4 (1.04")
3,6 (.14")
6,0 (.24")
38,0 (1.50")
Standard Threads "EM" Option G 1/8 PORT 1/8-27 M6X1,0 1/4-20
9,9 (.39") 8,7 (.34")
W
Ø44,0 (1.73")
X
Z
Y "C" TAP X 9,7 (.38") DP (4 PLACES)
"B" PORT (2 PLACES)
25.0 (Ø.984") ROD (ROD FLUSH WITH FACE)
Magnetic Side Mount Cylinder "MS" PISTON AREA MODEL STANDARD STROKES "A" 2 2 20mm PUSH 12,56 cm (1.95 in ) SC 25mm 47,0 (1.85") 2 2 PULL 9,42 cm (1.46 in ) 30mm
"B" "C"
Standard Threads "EM" Option G 1/8 PORT 1/8-27 M6X1,0 1/4-20
28,0 (1.10") 12,0 (.47")
50,0 SQ. (1.968")
25,0 (.98") 6,0 (.24")
38,0 (1.50")
"A" + STROKE 26,4 (1.04")
3,6 (.14")
9,9 (.39") 8,7 (.34")
W
X
Z
Ø44,0 (1.73")
Y SENSOR SLOT (2 PLACES. 180° APART)
"C" TAP X 9,7 (.38") DP (4 PLACES)
"B" PORT (2 PLACES)
25.0 (Ø.984") ROD (ROD FLUSH WITH FACE)
SC
40
MODEL
BORE
x STROKE
ROD STYLE
20 - 20mm STROKE 25 - 25mm STROKE 30 - 30mm STROKE
MS - SIDE THREADS FS - SIDE FLANGES (SEE PAGE 93)
BLANK (NO CODE) - ROUND ROD (SHOWN) F - FLAT ROD (SEE PAGE 92) W - FLAT ROD WITH ROLLER (SEE PAGE 92)
88
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS)
MOUNTING MAGNETIC
OPTIONS
EM - INCH THREADS & PORTS HS - HIGH TEMP SEALS (SEE PAGE 62) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
BLANK (NO CODE) - STANDARD "NO MAGNET" PISTON M - MAGNETIC PISTON AND SENSOR MOUNTING SLOTS
SC 50mm (2.0") Bore Non Magnetic Front Mount Cylinder "MF" PISTON AREA MODEL STANDARD STROKES "A" 2 2 20mm PUSH 19,63 cm (3.04 in ) SC 25mm 49,5 (1.95") 2 2 PULL 14,72 cm (2.28 in ) 30mm 28,0 (1.10")
63,0 (2.48") SQ.
"B" "C"
"A" + STROKE
26,9 (1.06")
50,0 (1.97")
10,9 (.43") 8,7 (.34")
6,5 (.26")
6,5 (.26")
Standard Threads "EM" Option G 1/8 PORT 1/8-27 M8X1,25 5/16-18
Rear Mount Cylinder "MR"
W
W
X
50,0 (1.97")
Ø56,0 (2.21")
X
Z
Z
Y
Mount Both End Cylinder "MB" W
Y
"B" PORT (2 PLACES)
"C" TAP X 20,3 (.80") DP (2 PLACES)
25,0 (Ø.984) ROD (ROD FLUSH WITH FACE)
X
Z
Y
Non Magnetic Thru Mount Cylinder "MT" PISTON AREA MODEL STANDARD STROKES "A" 2 2 20mm PUSH 19,63 cm (3.04 in ) SC 25mm 49,5 (1.95") 2 2 PULL 14,72 cm (2.28 in ) 30mm 63,0 (2.48") SQ.
28,0 (1.10")
50,0 (1.97")
6,5 (.26")
6,5 (.26")
"B"
Standard Threads "EM" Option G 1/8 PORT 1/8-27
"A" + STROKE
26,9 (1.06")
10,9 (.43") 8,7 (.34")
W
50,0 (1.97")
Ø56,0 (2.21")
X
Z
Y
SC
50
MODEL
BORE
"B" PORT (2 PLACES)
6,8 (Ø.268") DRILL THRU 10,4 (Ø.41") C'BORE X 6,9 (.27") DP (2 PLACES, OPPOSITE FACE)
25,0 (Ø.984) ROD (ROD FLUSH WITH FACE)
x STROKE
ROD STYLE
20 - 20mm STROKE 25 - 25mm STROKE 30 - 30mm STROKE
MOUNTING
OPTIONS
EM - INCH THREADS & PORTS HS - HIGH TEMP SEALS (SEE PAGE 62) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
BLANK (NO CODE) - ROUND ROD (SHOWN) F - FLAT ROD (SEE PAGE 92) W - FLAT ROD WITH ROLLER (SEE PAGE 92) MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93)
89
SC 50mm (2.0") Bore Magnetic Front Mount Cylinder "MF" PISTON AREA MODEL STANDARD STROKES "A" 2 2 20mm PUSH 19,63 cm (3.04 in ) SC 25mm 49,5 (1.95") 2 2 PULL 14,72 cm (2.28 in ) 30mm 28,0 (1.10")
63,0 SQ. (2.48")
6,5 (.26")
10,9 (.43") 8,7 (.34")
W
50,0 (1.97")
Standard Threads "EM" Option G 1/8 PORT 1/8-27 M8X1,25 5/16-18
"A" + STROKE
26,9 (1.06")
50,0 (1.97")
6,5 (.26")
"B" "C"
Rear Mount Cylinder "MR"
X
Ø56,0 (2.21")
X
Z
W
Z
Y
Mount Both End Cylinder "MB"
Y
"C" TAP X 20,3(.80") DP (2 PLACES)
25,0 (Ø.984) ROD (ROD FLUSH WITH FACE)
W
"B" PORT (2 PLACES)
X
Z
SENSOR SLOT (2 PLACES. 180° APART)
Y
Magnetic Thru Mount Cylinder "MT" PISTON AREA MODEL STANDARD STROKES "A" 2 2 20mm PUSH 19,63 cm (3.04 in ) SC 25mm 49,5 (1.95") 2 2 PULL 14,72 cm (2.28 in ) 30mm
"B"
28,0 (1.10")
63,0 SQ. (2.48") 50,0 (1.97")
6,5 (.26")
6,5 (.26")
50,0 (1.97")
10,9 (.43") 8,7 (.34")
Ø56,0 (2.21")
X
Z
"A" + STROKE
26,9 (1.06")
SENSOR SLOT (2 PLACES. 180° APART)
W
Standard Threads "EM" Option G 1/8 PORT 1/8-27
Y
SC
50
MODEL
BORE
x
M STROKE
ROD STYLE
20 - 20mm STROKE 25 - 25mm STROKE 30 - 30mm STROKE BLANK (NO CODE) - ROUND ROD (SHOWN) F - FLAT ROD (SEE PAGE 92) W - FLAT ROD WITH ROLLER (SEE PAGE 92)
90
"B" PORT (2 PLACES)
6,8 (Ø.268") DRILL THRU 10,4 (Ø.41") C'BORE X 6,9 (.27") DP (2 PLACES, OPPOSITE FACE)
25,0 (Ø.984) ROD (ROD FLUSH WITH FACE)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS)
MOUNTING MAGNETIC
OPTIONS
EM - INCH THREADS & PORTS HS - HIGH TEMP SEALS (SEE PAGE 62) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
MB - BOTH END MOUNTS MF - FRONT MOUNT MR - REAR MOUNT MT - THRU MOUNT FR - FLANGE ON REAR FACE (SEE PAGE 93)
SC 50mm (2.0") Bore Non Magnetic Side Mount Cylinder "MS" PISTON AREA MODEL STANDARD STROKES "A" 2 2 20mm PUSH 19,63 cm (3.04 in ) SC 25mm 49,5 (1.95") 2 2 PULL 14,72 cm (2.28 in ) 30mm
"B" "C" 28,0 (1.10")
63,0 SQ. (2.48") 12,0 (.47")
50,0 (1.97")
"A" + STROKE
26,9 (1.06")
25,0 (.98") 6,5 (.26")
Standard Threads "EM" Option G 1/8 PORT 1/8-27 M8X1,25 5/16-18
10,9 (.43") 8,7 (.34")
W
X
Z
Ø56,0 (2.21")
Y "C" TAP X 12,0 (.47") DP (4 PLACES)
"B" PORT (2 PLACES)
25,0 (Ø.984) ROD (ROD FLUSH WITH FACE)
Magnetic Side Mount Cylinder "MS" PISTON AREA MODEL STANDARD STROKES "A" 2 2 20mm PUSH 19,63 cm (3.04 in ) SC 25mm 49,5 (1.95") 2 2 PULL 14,72 cm (2.28 in ) 30mm
12,0 (.47")
"B" "C" 28,0 (1.10")
63,0 SQ. (2.48")
25,0 (.98") 6,5 (.26")
50,0 (1.97")
Standard Threads "EM" Option 1/8-27 G 1/8 PORT M8X1,25 5/16-18
8,7 (.34")
W
X
Z
Ø56,0 (2.21")
SENSOR SLOT (2 PLACES. 180° APART)
"C" TAP X 12,0 (.47") DP (4 PLACES)
50
MODEL
BORE
10,9 (.43")
26,9 (1.06")
Y
SC
"A" + STROKE
"B" PORT (2 PLACES)
25,0 (Ø.984) ROD (ROD FLUSH WITH FACE)
x STROKE
ROD STYLE
20 - 20mm STROKE 25 - 25mm STROKE 30 - 30mm STROKE
MS - SIDE THREADS FS - SIDE FLANGES (SEE PAGE 93)
BLANK (NO CODE) - ROUND ROD (SHOWN) F - FLAT ROD (SEE PAGE 92) W - FLAT ROD WITH ROLLER (SEE PAGE 92)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS)
MOUNTING MAGNETIC
OPTIONS
EM - INCH THREADS & PORTS HS - HIGH TEMP SEALS (SEE PAGE 62) UR - URETHANE SHOCK PAD REAR (SEE PAGE 62)
BLANK (NO CODE) - STANDARD "NO MAGNET" PISTON M - MAGNETIC PISTON AND SENSOR MOUNTING SLOTS
91
Rod End Styles
Round Rod - Rod Code Blank (No Code) SHOWN EXTENDED STROKE (RETRACTS FLUSH)
W
X
Z
Y "A" DIA. (SHOWN EXTENDED)
WORKPIECE TRANSFER DIRECTION
Flat Rod - Rod Code"F"
W
X
Z
"B"
SHOWN EXTENDED
STROKE (RETRACTS FLUSH)
"A" DIA. (SHOWN EXTENDED)
Y
Standard orientation for flat is side "W". Flat can be reoriented to any position.
Flat Rod With Roller - Rod Code - "W" W
WORKPIECE TRANSFER DIRECTION
SHOWN RETRACTED "C"
X
Z
"B"
Y
"E"
"A" DIA.
"F" DIA.
Standard orientation for flat is side "W". Flat can be reoriented to any position.
Bore 20 25 32 40 50
92
"A"
"B"
"C"
"F"
"D"
"E"
10,0(0.394") 8,0(0.315") 3,5 (.14") 12,0(0.472") 10,0(0.394") 4,0(.16") 20,0(0.787") 18,0(0.709") 8,0 (.32")
6,35(0.25")
8,5 (0.33")
8,0 (0.32")
8,6(0.34")
11,0 (.43")
10,0 (0.39")
17,0(0.67")
19,0 (.75")
18,0 (0.71")
25,0(0.984") 22,5(0.886") 9,0 (.35") 25,0(0.984") 22,5(0.886") 9,0 (.35")
20,6(0.81")
25,0 (.98")
24,0 (0.95")
20,6(0.81")
25,0 (.98")
24,0 (0.95")
- Rod shown extended on Round Rod and Flat Rod Styles - Roller material: Plastic
Rear Face Flange Mount Rear Face Flange Mount - "FR" FLANGE CAN BE ROTATED 90°
"G" "H"
"B" SEE INDIVIDUAL PRODUCT PAGE FOR CYLINDER DIMENSIONS
"C"
"D"
"A"
"F"
"E" (2 PLACES)
Bore 20 25 32 40 50
"A"
"B"
50,8 (2.0")
9,5 (.38")
63,5 (2.5") 76,2 (3.0") 93,0 (3.66")
9,5 (.38") 12,7 (.50")
Material: Anodized Aluminum
"C" 5,4 (.21") 3,9 (.15") 5,75 (.23") 8,1 (.32") 7,5 (.30")
"D" 40,0 (1.58") 43,0 (1.69") 52,0 (2.05") 60,0 (2.36") 78,0 (3.07")
"E"
"F"
4,5 (.18")
25,4 (1.0") 31,8 (1.25") 38,1 (1.50") 46,5 (1.83")
5,5 (.22") 8,5 (.33")
Side Flange Mount - "FS"
"G" 31,8 (1.25") 38,1 (1.50") 44,5 (1.75") 50,8 (2.00") 63,5 (2.50")
"F"
"B"
"F"
"G"
SEE INDIVIDUAL PRODUCT PAGE FOR CYLINDER DIMENSIONS
"H" 15,9 (.63") 19,05 (.75") 22,25 (.88") 25,4 (1.00") 31,8 (1.25")
"G"
"D"
"A"
"J"
"C" "H" "E" (4 PLACES)
Material: Anodized Aluminum Bore 20 25
"A"
"B"
50,8 (2.00")
9,5 (.38")
32
63,5 (2.50")
40
76,2 (3.00")
50
93 (3.66")
9,5 (.38") 12,7 (.50")
"C"
"D"
5,4 (.21")
40 (1.58")
3,9 (.15")
43 (1.69")
5,75 (.23")
52 (2.05")
8,1 (.32")
60 (2.36")
7,5 (.30")
78 (3.07")
"E" 4,5 (.18") 5,5 (.22") 8,5 (.33")
"F" 19 (.75")
"G"
"H"
"J"
9,5 (.38")
20,0 (.79")
25,4 (1.0")
25,4 (1.00") 12,7 (.50")
16,25 (.64") 31,8 (1.25") 38,1 (1.50") 25,75 (1.01") 46,5 (1.83")
93
Hard chrome plated steel rod
Figure 8 hydraulic piston seal
Fabric reinforced phenol resin wear strip
Long bronze rod bearing
Rod wiper
Machined bore anodized aluminum housing
Bolt-on anodized aluminum heads
L 15 SERIES
L15 SERIES 1500PSI HYDRAULIC CYLINDERS Common Features Nason’s L15 series hydraulic actuators were designed to be compact, low friction, long lasting devices for today’s demanding design requirements. They are offered in single and double rod configurations with inch or metric mounting and ports.
Rugged Construction The L15 series incorporates thick walled, anodized aluminum housings and caps. Rods are chrome plated 1045/1050 steel riding in selflubricating bronze bearings. Hardened fasteners are used for assembly. Steel pistons with wear rings and rod wipers are standard on all models.
Low Breakaway and Running Friction / Long Life Designed for low start up and running friction, the L15 series contains low friction Nitrile seals and are lubricated at the factory with PTFE impregnated grease. Precision machined components and self-lubricating bearings ensure long life and continued low friction operation.
Versatile Design The L15 series cylinders are metric in design (bore and rod sizes). They are offered in inch or metric mounting and porting. Due to their 100% machined design, they are easily customized by Nason.
Compact Size Nason L15 cylinders were designed with today’s automation equipment in mind. They offer more power in a smaller package than comparable 1500 PSI hydraulic cylinders.
Rebuildable All L15 series cylinders are field rebuildable.
How to Order
How to Order Example: Part Number: L15-32X25MS-EMRVRS L15
32
MODEL
BORE
x
MS
25
EM
MOUNTING MAGNETIC
STROKE
RV
RS
OPTIONS
TYPE
MODEL L15 - 1500 PSI Hydraulic Cylinder
MOUNTING MF - Threads on Front Face (Rod End) MR - Threads on Rear Face (Opposite Rod) MB - Threads on Both Faces MS - Threads on Side of Cylinder Body
BORE 20 - 20mm (.79")
MAGNETIC
25 - 25mm (.98")
BLANK (No Code) - Standard No Magnet
32 - 32mm (1.26")
M - Magnetic Piston and Sensor Mounting
40 - 40mm (1.58") 50 - 50mm (1.97")
OPTIONS 15 - 15mm (.59")
EM - InchThreads (Mounting and Ports) (See product pages for sizes) RS - Male Stud for Rod End (Length - 2 x Thread Diameter)
25 - 25mm (.98")
RF - 5mm (.197") Rod Extension
40 - 40mm (1.58")
RT - 10mm (.394") Rod Extension
50 - 50mm (1.97")
RV - 25mm (.984") Rod Extension
STROKE
65 - 65mm (2.56") 75 - 75mm (2.95")
TYPE BLANK (No Code) - Double Acting, Single Rod D - Double Acting, Double Rod
95
Engineering Data
Operating Media:
Mineral oil, water polyglycal solutions, water-in-oil emulsions
Maximum Operating Pressure: 103 Bar (1500 PSI) 50mm Bore Magnetic Piston—69 Bar (1,000 PSI) Operating Temperature:
-10˚C to 70˚C (0˚F to 158˚F)
Packing:
Buna N
Lubrication:
PTFE impregnated grease
Stroke Tolerance:
+0,75mm/-0mm (+0.03"/-0")
Cylinder Output Force Formula
Piston Area Chart Bore
96
Push (Rod Extend)
Pull (Rod Retract)
20
3,14 cm2 (.48 in2)
2,64 cm2 (.40 in2)
25
4,91 cm2 (.76 in2)
4,12 cm2 (.64 in2)
32
8,04 cm2 (1.25 in2)
6,91 cm2 (1.07 in2)
40
12,56 cm2 (1.95 in2)
10,55 cm2 (1.64 in2)
50
19,63 cm2 (3.04 in2)
16,49 cm2 (2.56 in2)
Piston Area x Pressure = Output Force Piston Area (in2) x Pressure (PSI) = lbf (Pounds Force) Piston Area (cm2) x Pressure (kg/cm2) = kgf (Kilograms Force) Piston Area (cm2) x Pressure (kg/cm2) x 9.8 = Newtons Piston Area (cm2) x Pressure (Bar) x 10 = Newtons Piston Area (cm2) x Pressure (Bar) x 10 = Newtons Piston Area (cm2) x Pressure (Bar) x 1.02 = kgf (Kilograms Force)
L15 20mm (3/4") Bore Non Magnetic Front Mount Cylinder "MF" MODEL
L15
PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm 2 2 PUSH 3,14 cm (0.48 in ) 40mm 47,0 (1.85") _,D 2 2 50mm PULL 2,64 cm (0.40 in ) 65mm 75mm 5,0 (.20")
31,8 (1.25") SQ.
18,5 (.73") (2 PLACES)
4,0 (.16")
Standard Threads "EM" Option R 1/8 (1/8-28 BSPT) 1/8-27 M5X0,8 #10-32 M4X0,7 #8-32
5,0 (.20") + STROKE TYPE D
"A" + STROKE
23,8 (.94")
4,0 (.16")
"B" "C" "D"
6,4 (.25")
Rear Mount Cylinder "MR"
W
W Z X
23,8 (.94")
X
Z
Y
15,9 (.63")
8,0 (Ø.315) ROD "C" TAP
Mount Both End Cylinder "MB" W
Y 15,9 (.63")
"B" PORT (2 PLACES)
"D" TAP X 8,0 (.31") DP (4 PLACES)
X
Z Y
Non Magnetic Side Mount Cylinder "MS" MODEL
L15
PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm 2 2 PUSH 3,14 cm (0.48 in ) 40mm 47,0 (1.85") _,D 2 2 50mm PULL 2,64 cm (0.40 in ) 65mm 75mm 5,0 (.20") 4,8 (.19") (2 PLACES)
8,5 (.33")
Standard Threads "EM" Option R 1/8 (1/8-28 BSPT) 1/8-27 M5X0,8 #10-32 M4X0,7 #8-32
"A" + STROKE
5,0 (.2 0") + STROKE TYPE D
18,5 (.73") (2 PLACES)
31,8 (1.25") SQ.
11,6 (.46")
"B" "C" "D"
6,4(.25")
W
Z
X
Y
"D" TAP X 6,0 (.24") DP (4 PLACES)
"B" PORT (2 PLACES)
8,0 (Ø.315) ROD "C" TAP
x
L15
20
MODEL
BORE
STROKE
TYPE
MOUNTING
15mm - 75mm STROKE (SEE STROKE RANGE) BLANK - NO CODE D - DOUBLE ROD MB - BOTH END MOUNT MF - FRONT MOUNT MR - REAR MOUNT MS - SIDE MOUNT
OPTIONS
EM - INCH THREADS & PORT OPTIONS: RS - MALE STUD FOR ROD END (SEE PAGE 61 FOR DETAILS) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61 FOR DETAILS)
97
L15 20mm (3/4") Bore Magnetic Front Mount Cylinder "MF" MODEL
L15
PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm 2 2 PUSH 3,14 cm (0.48 in ) 40mm 62,0 (2.44") _,D 2 2 50mm PULL 2,64 cm (0.40 in ) 65mm 75mm 5,0 (.20")
31,8 (1.25") SQ.
18,5(.73") (2 PLACES)
4,0 (.16")
Standard Threads "EM" Option R 1/8 (1/8-28 BSPT) 1/8-27 M5X0,8 #10-32 M4X0,7 #8-32
5,0 (.20") + STROKE TYPE D
"A" + STROKE
23,8 (.94")
4,0 (.16")
"B" "C" "D"
6,4 (.25")
Rear Mount Cylinder "MR"
W
W Z
X
23,8 (.94")
8,0 (Ø.315) ROD "C" TAP
X
Z
Y
15,9 (.63")
Mount Both End Cylinder "MB" W
Y
"B" PORT (2 PLACES)
"D" TAP X 8,0 (.31") DP (4 PLACES)
15,9 (.63")
SENSOR TRACK (2 PLACES, 90° APART)
X
Z Y
Magnetic Side Mount Cylinder "MS" MODEL
L15
PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm 2 2 PUSH 3,14 cm (0.48 in ) 40mm 62,0 (2.44") _,D 2 2 50mm PULL 2,64 cm (0.40 in ) 65mm 75mm
"B" "C" "D"
5,0 (.20") 4,8 (.1 9") (2 PLACES)
6,4 (.25")
Z
X
Y
"D" TAP X 6,0 (.24") DP (4 PLACES)
SENSOR TRACK (2 PLACES, 90° APART)
8,0 (Ø.315) ROD "C" TAP
20
MODEL
BORE
x
"B" PORT (2 PLACES)
M STROKE
TYPE
MOUNTING MAGNETIC
15mm - 75mm STROKE (SEE STROKE RANGE) BLANK - NO CODE D - DOUBLE ROD
98
18,5 (.73") (2 PLACES)
W
8,5 (.33")
L15
5,0 (.20") + STROKE TYPE D
"A" + STROKE
31,8 (1.25") SQ.
11,6 (.46")
Standard Threads "EM" Option R 1/8 (1/8-28 BSPT) 1/8-27 M5X0,8 #10-32 M4X0,7 #8-32
MB - BOTH END MOUNT MF - FRONT MOUNT MR - REAR MOUNT MS - SIDE MOUNT
OPTIONS
EM - INCH THREADS & PORT OPTIONS: RS - MALE STUD FOR ROD END (SEE PAGE 61 FOR DETAILS) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61 FOR DETAILS)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS)
L15 25mm (1.0") Bore
Non Magnetic Front Mount Cylinder "MF" MODEL
L15
PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm 2 2 PUSH 4,91 cm (0.76 in ) 40mm 53,0 (2.09") _,D 2 2 50mm PULL 4,12 cm (0.64 in ) 65mm 75mm 5,0 (.20")
35,0 (1.38") SQ.
"B" "C" "D"
5,0 (.20") + STROKE TYPE D
"A" + STROKE
25,0 (.98")
21,0 (.83") (2 PLACES)
5,0 (.20")
6,4 (.25")
5,0 (.20")
W
25,0 (.98")
10,0 (ÿ .394") ROD "C" TAP
Standard Threads "EM" Option R 1/8 (1/8-28 BSPT) 1/8-27 M6X1,0 1/4-20 M5X0,8 #10-32
Rear Mount Cylinder "MR"
Z
X
X
Z
W
17,5 (.69")
Y
Mount Both End Cylinder "MB" W
Y 17,5 (.69")
"B" PORT (2 PLACES)
"D" TAP X 10,0( .39") DP (4 PLACES)
X
Z
Y
Non Magnetic Side Mount Cylinder "MS" MODEL
L15
PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm 2 2 PUSH 4,91 cm (0.76 in ) 40mm 53,0 (2.09") _,D 2 2 50mm PULL 4,12 cm (0.64 in ) 65mm 75mm 5,0 (.20") 6,0 (.24") (2 PLACES)
"B" "C" "D"
Standard Threads "EM" Option R 1/8 (1/8-28 BSPT) 1/8-27 M6X1,0 1/4-20 M5X0,8 #10-32
"A" + STROKE
5,0 (.20") + STROKE TYPE D
21,0 (.83") (2 PLACES)
35,0(1.38") SQ.
6,4 (.25") 12,5 (.49")
W
Z
X
10,0 (.39")
Y
"B" PORT (2 PLACES)
10,0 (�.394") ROD "C" TAP
"D" TAP X 7,5 (.30") DP (4 PLACES)
x
L15
25
MODEL
BORE
STROKE
TYPE
MOUNTING
15mm - 75mm STROKE (SEE STROKE RANGE) BLANK - NO CODE D - DOUBLE ROD MB - BOTH END MOUNT MF - FRONT MOUNT MR - REAR MOUNT MS - SIDE MOUNT
OPTIONS
EM - INCH THREADS & PORT OPTIONS: RS - MALE STUD FOR ROD END (SEE PAGE 61 FOR DETAILS) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61 FOR DETAILS)
99
L15 25mm (1.0") Bore Magnetic Front Mount Cylinder "MF" MODEL
L15
PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm 2 2 PUSH 4,91 cm (0.76 in ) 40mm 68,0 (2.68") _,D 2 2 50mm PULL 4,12 cm (0.64 in ) 65mm 75mm 5,0 (.20")
35,0 (1.38") SQ.
Standard Threads "EM" Option R 1/8 (1/8-28 BSPT) 1/8-27 M6X1,0 1/4-20 M5X0,8 #10-32
5,0 (.20") + STROKE TYPE D
"A" + STROKE
25,0 (.98")
21,0 (.83") (2 PLACES)
5,0 (.20")
5,0 (.20")
"B" "C" "D"
6,4 (.25")
W
25,0 (.98")
10,0 (Ø.394") ROD "C" TAP
Rear Mount Cylinder "MR"
Z
X
X
Z
W
17,5 (.69")
Mount Both End Cylinder "MB"
Y
W
Y 17,5 (.69")
"B" PORT (2 PLACES) SENSOR TRACK (2 PLACES, 90° APART)
"D" TAP X 10,0 (.39") DP (4 PLACES)
X
Z
Y
Magnetic Side Mount Cylinder "MS" MODEL
L15
PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm 2 2 PUSH 4,91 cm (0.76 in ) 40mm 68,0 (2.68") _,D 2 2 50mm PULL 4,12 cm (0.64 in ) 65mm 75mm
"B" "C" "D"
5,0 (.20") 6,0 (.24") (2 PLACES)
5,0 (.20") + STROKE TYPE D
"A" + STROKE
21,0 (.83") (2 PLACES)
35,0(1.38") SQ.
12,5 (.49")
Standard Threads "EM" Option R 1/8 (1/8-28 BSPT) 1/8-27 M6X1,0 1/4-20 M5X0,8 #10-32
6,4 (.25")
W
Z
X
10,0 (.39")
Y 10,0 (�.394") ROD "C" TAP
"D" TAP X 7,5 (.30") DP (4 PLACES)
L15
25
MODEL
BORE
x
"B" PORT (2 PLACES)
M STROKE
TYPE
MOUNTING MAGNETIC
15mm - 75mm STROKE (SEE STROKE RANGE) BLANK - NO CODE D - DOUBLE ROD
100
SENSOR TRACK (2 PLACES, 90° APART)
MB - BOTH END MOUNT MF - FRONT MOUNT MR - REAR MOUNT MS - SIDE MOUNT
OPTIONS
EM - INCH THREADS & PORT OPTIONS: RS - MALE STUD FOR ROD END (SEE PAGE 61 FOR DETAILS) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61 FOR DETAILS)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS)
L15 32mm (1-1/4") Bore
Non Magnetic Front Mount Cylinder "MF" MODEL
L15
PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm 2 2 PUSH 8,04 cm (1.25 in ) 40mm 60,0 (2.36") _,D 2 2 50mm PULL 6,91 cm (1.07 in ) 65mm 75mm
6,0 (.24")
42,0 (1.65") SQ.
"B" "C" "D"
6,0 (.24") + STROKE TYPE D
"A" + STROKE
4,4 (.17")
23,7 (.93") (2 PLACES)
30,0 (1.18")
Standard Threads "EM" Option R 1/8 (1/8-28 BSPT) 1/8-27 M8X1,25 5/16-18 M6X1,0 1/4-20
7,1 (.28")
6,0 (.24")
Rear Mount Cylinder "MR"
6,0(.24")
W
W Z
X 30,0 (1.18")
Z
12,0 (ÿ .472") ROD "C" TAP
X
Y 21,0 (.83")
Mount Both End Cylinder "MB" W
Y 21,0 (.83")
"B" PORT (2 PLACES)
"D" TAP X 12,0 (.47") DP (4 PLACES)
Z
X Y
Non Magnetic Side Mount Cylinder "MS" MODEL
L15
PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm 2 2 PUSH 8,04 cm (1.25 in ) 40mm 60,0 (2.36") _,D 2 2 50mm PULL 6,91 cm (1.07 in ) 65mm 75mm
"B" "C" "D"
6,0 (.24")
7,0 (.28") (2 PLACES)
Standard Threads "EM" Option R 1/8 (1/8-28 BSPT) 1/8-27 M8X1,25 5/16-18 M6X1,0 1/4-20
"A" + STROKE
6,0 (.24") + STROKE TYPE D
23,7 (.93") (2 PLACES)
42,0 (1.65") SQ. 4,4 (.17")
14,0 (.55")
7,1 (.28")
W
Z
X
14,0 (.55")
Y "B" PORT (2 PLACES)
12,0 (�.472") ROD "C" TAP
"D" TAP X 9,0 (.35") DP (4 PLACES)
x
L15
32
MODEL
BORE
STROKE
TYPE
MOUNTING
15mm - 75mm STROKE (SEE STROKE RANGE) BLANK - NO CODE D - DOUBLE ROD MB - BOTH END MOUNT MF - FRONT MOUNT MR - REAR MOUNT MS - SIDE MOUNT
OPTIONS
EM - INCH THREADS & PORT OPTIONS: RS - MALE STUD FOR ROD END (SEE PAGE 61 FOR DETAILS) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61 FOR DETAILS)
101
L15 32mm (1-1/4") Bore Magnetic Front Mount Cylinder "MF" TYPE STANDARD STROKES
MODEL L15
_,D
PISTON AREA
"A"
2
75,0 (2.95")
15mm - 75mm
Standard Threads "EM" Option R 1/8 (1/8-28 BSPT) 1/8-27 M8X1,25 5/16-18 M6X1,0 1/4-20 TYPE D 6,0 (.24") + STROKE
"A" + STROKE
4,4(.17")
30,0 (1.18")
2
2
PULL 6,91 cm (1.07 in )
6,0 (.24")
42,0 (1.65") SQ.
"B" "C" "D"
2
PUSH 8,04 cm (1.25 in )
23,7 (.93") (2 PLACES)
7,1 (.28")
6,0 (.24") 6,0 (.24")
Rear Mount Cylinder "MR"
W
30,0 (1.18")
12,0 (Ø.472") ROD "C" TAP
W Z
X Z
X
Y
21,0 (.83")
Mount Both End Cylinder "MB" W
Y 21,0 (.83")
"D" TAP X 12,0 (.47") DP (4 PLACES)
"B" PORT (2 PLACES)
SENSOR TRACK (2 PLACES, 90° APART)
Z
X Y
Magnetic Side Mount Cylinder "MS" MODEL
TYPE STANDARD STROKES
L15
15mm - 75mm
_,D
PISTON AREA
"A"
2
75,0 (2.95")
"B" "C" "D"
2
PUSH 8,04 cm (1.25 in ) 2
2
PULL 6,91 cm (1.07 in )
6,0 (.24")
7,0 (.28") (2 PLACES)
Standard Threads "EM" Option R 1/8 (1/8-28 BSPT) 1/8-27 M8X1,25 5/16-18 M6X1,0 1/4-20 TYPE D 6,0 (.24") + STROKE
"A" + STROKE
23,7 (.93") (2 PLACES)
42,0 (1.65") SQ. 4,4 (.17")
14,0 (.55 ")
7,1 (.28")
W
Z
X
14,0(.55")
Y 12,0 (�.472") ROD "C" TAP
"D" TAP X 9,0 (.35") DP (4 PLACES)
L15
32
MODEL
BORE
x
"B" PORT (2 PLACES)
M STROKE
TYPE
MOUNTING MAGNETIC
15mm - 75mm STROKE (SEE STROKE RANGE) BLANK - NO CODE D - DOUBLE ROD
102
SENSOR TRACK (2 PLACES, 90° APART)
MB - BOTH END MOUNT MF - FRONT MOUNT MR - REAR MOUNT MS - SIDE MOUNT
OPTIONS
EM - INCH THREADS & PORT OPTIONS: RS - MALE STUD FOR ROD END (SEE PAGE 61 FOR DETAILS) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61 FOR DETAILS)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS)
L15 40mm (1-1/2") Bore
Non Magnetic Front Mount Cylinder "MF" MODEL
L15
PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm 2 2 PUSH 12,56 cm (1.95 in ) 40mm 76,5 (3.01") _,D 2 2 50mm PULL 10,55 cm (1.64 in ) 65mm 75mm 6,0 (.24")
50,0 (1.97") SQ.
"B" "C" "D"
6,0 (.24") + STROKE TYPE D
"A" + STROKE
3,6 (.14")
31,3 (1.23") (2 PLACES)
38,0 (1.50")
Standard Threads "EM" Option R 1/8 (1/8-28 BSPT) 1/8-27 M10X1,5 3/8-24 M6X1,0 1/4-20
8,7 (.34")
Rear Mount Cylinder "MR"
W
6,0 (.24")
6,0 (.24")
W
38,0 (1.50")
Y
Z
16,0 (ÿ .630") ROD "C" TAP
Z
X
X
Mount Both End Cylinder "MB"
25,0 (.98")
W
Y
Z
25,0 (.98")
X
"B" PORT (2 PLACES)
"D" TAP X 15,0 (.59") DP (4 PLACES)
Y
Non Magnetic Side Mount Cylinder "MS" MODEL
L15
PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm 2 2 PUSH 12,56 cm (1.95 in ) 40mm 76,5 (3.01") _,D 2 2 50mm PULL 10,55 cm (1.64 in ) 65mm 75mm 6,0 (.24")
Standard Threads "EM" Option R 1/8 (1/8-28 BSPT) 1/8-27 M10X1,5 3/8-24 M8X1,25 5/16-18
"A" + STROKE
6,0 (.24") + STROKE TYPE D
31,3 (1.23") (2 PLACES)
50,0 (1.97") SQ.
10,0 (.39") (2 PLACES)
"B" "C" "D"
3,6 (.14")
15,0(.59")
8,7 (.34")
W
Z
X
20,0 (.79")
Y "D" TAP X 12,0 (.47") DP (4 PLACES)
"B" PORT (2 PLACES)
16,0 (ÿ .630) ROD "C" TAP
x
L15
40
MODEL
BORE
STROKE
TYPE
MOUNTING
15mm - 75mm STROKE (SEE STROKE RANGE) BLANK - NO CODE D - DOUBLE ROD MB - BOTH END MOUNT MF - FRONT MOUNT MR - REAR MOUNT MS - SIDE MOUNT
OPTIONS
EM - INCH THREADS & PORT OPTIONS: RS - MALE STUD FOR ROD END (SEE PAGE 61 FOR DETAILS) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61 FOR DETAILS)
103
L15 40mm (1-1/2") Bore Magnetic Front Mount Cylinder "MF" MODEL
L15
PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm 2 2 PUSH 12,56 cm (1.95 in ) 40mm 91,5 (3.60") _,D 2 2 50mm PULL 10,55 cm (1.64 in ) 65mm 75mm 6,0 (.24")
50,0 (1.97") SQ.
6,0 (.24")
6,0 (.24")
Standard Threads "EM" Option R 1/8 (1/8-28 BSPT) 1/8-27 M10X1,5 3/8-24 M6X1,0 1/4-20
6,0 (.24") + STROKE TYPE D
"A" + STROKE
3,6 (.14")
38,0 (1.50")
"B" "C" "D"
31,3 (1.23") (2 PLACES)
8,7 (.34")
Rear Mount Cylinder "MR"
W
38,0 (1.50")
16,0 (Ø.630") ROD "C" TAP
W Z
X Y
Z
X
Mount Both End Cylinder "MB"
25,0 (.98")
W
Y 25,0 (.98")
"D" TAP X 15,0 (.59") DP (4 PLACES)
SENSOR TRACK (2 PLACES, 90° APART)
"B" PORT (2 PLACES)
Z
X Y
Magnetic Side Mount Cylinder "MS" MODEL
L15
PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm 2 2 PUSH 12,56 cm (1.95 in ) 40mm 91,5 (3.60") _,D 2 2 50mm PULL 10,55 cm (1.64 in ) 65mm 75mm
"B" "C" "D"
6,0 (.24") 50,0 (1.97") SQ.
10,0 (.39") (2 PLACES)
15,0 (.59")
Standard Threads "EM" Option R 1/8 (1/8-28 BSPT) 1/8-27 M10X1,5 3/8-24 M8X1,25 5/16-18
6,0 (.24") + STROKE TYPE D
"A" + STROKE 31,3 (1.23") (2 PLACES)
3,6 (.14")
8,7 (.34")
W
Z
X
20,0 (.79")
Y "D" TAP X 12,0 (.47") DP (4 PLACES)
L15
40
MODEL
BORE
16,0 (Ø.630) ROD "C" TAP
x
"B" PORT (2 PLACES)
M STROKE
TYPE
MOUNTING MAGNETIC
15mm - 75mm STROKE (SEE STROKE RANGE) BLANK - NO CODE D - DOUBLE ROD
104
SENSOR TRACK (2 PLACES, 90° APART)
MB - BOTH END MOUNT MF - FRONT MOUNT MR - REAR MOUNT MS - SIDE MOUNT
OPTIONS
EM - INCH THREADS & PORT OPTIONS: RS - MALE STUD FOR ROD END (SEE PAGE 61 FOR DETAILS) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61 FOR DETAILS)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS)
L15 50mm (2.0") Bore
Non Magnetic Front Mount Cylinder "MF" MODEL
L15
PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm 2 2 PUSH 19,63 cm (3.04 in ) 40mm 80,0 (3.15") _,D 2 2 50mm PULL 17,62 cm (2.73 in ) 65mm 75mm 63,0 (2.48") SQ.
6,0 (.24")
Standard Threads "EM" Option R 1/8 (1/8-28 BSPT) 1/8-27 M12X1,75 1/2-13 M8X1,25 5/16-18
6,0 (.24") + STROKE TYPE D
"A" + STROKE
50,0 (1.97")
6,6 (.26")
"B" "C" "D"
31,3 (1.23") (2 PLACES) 17,5 (.69")
6,6 (.26")
W
50,0 (1.97")
Rear Mount Cylinder "MR"
Z
X
X
Z
W
31,5 (1.24")
Y
Mount Both End Cylinder "MB"
Y
20,0 (ÿ .787") ROD "C" TAP
"B" PORT (2 PLACES)
31,5 (1.24")
W
Z
"D" TAP X 15,7 (.62") DP (4 PLACES)
X
Y
Non Magnetic Side Mount Cylinder "MS" MODEL
L15
PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm 2 2 PUSH 19,63 cm (3.04 in ) 40mm 80,0 (3.15") _,D 2 2 50mm PULL 17,62 cm (2.73 in ) 65mm 75mm
"B" "C" "D"
6,0 (.24") 10,0 (.39") (2 PLACES)
Standard Threads "EM" Option R 1/8 (1/8-28 BSPT) 1/8-27 M12X1,75 1/2-13 M8X1,25 5/16-18
"A" + STROKE
TYPE D 6,0 (.24") + STROKE
31,3 (1.23") (2 PLACES)
63,0 (2.48") SQ.
17,5 (.69")
W
20,0 (.79") X
Z
23,0 (.91") Y
"D" TAP X 15,0 (.59") DP (4 PLACES)
20mm (ÿ .787") ROD "C" TAP
"B" PORT (2 PLACES)
x
L15
50
MODEL
BORE
STROKE
TYPE
MOUNTING
15mm - 75mm STROKE (SEE STROKE RANGE)
BLANK - NO CODE D - DOUBLE ROD MB - BOTH END MOUNT MF - FRONT MOUNT MR - REAR MOUNT MS - SIDE MOUNT
OPTIONS
EM - INCH THREADS & PORT OPTIONS: RS - MALE STUD FOR ROD END (SEE PAGE 61 FOR DETAILS) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61 FOR DETAILS)
105
L15 50mm (2.0") Bore Magnetic Front Mount Cylinder "MF" MODEL
L15
PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm 2 2 PUSH 19,63 cm (3.04 in ) 40mm 95,0 (3.74") _,D 2 2 50mm PULL 17,62 cm (2.73 in ) 65mm 75mm 6,0 (.24")
63,0 (2.48") SQ.
6,6 (.26")
6,0 (.24") + STROKE TYPE D
"A" + STROKE 31,3 (1.23") (2 PLACES)
50,0 (1.97")
6,6 (.26")
Standard Threads "EM" Option R 1/8 (1/8-28 BSPT) 1/8-27 M12X1,75 1/2-13 M8X1,25 5/16-18
"B" "C" "D"
17,5 (.69")
W
50,0 (1.97")
Rear Mount Cylinder "MR"
31,5 (1.24")
Y
Mount Both End Cylinder "MB"
Y
20,0 (Ø.787") ROD "C" TAP
31,5 (1.24")
W
"B" PORT (2 PLACES)
SENSOR TRACK (2 PLACES, 180° APART)
"D" TAP X 15,7 (.62") DP (4 PLACES)
Z
L15
X
Y
Magnetic Side Mount Cylinder "MS" MODEL
Z
X
X
Z
W
PISTON AREA TYPE STANDARD STROKES "A" 15mm 25mm 2 2 PUSH 19,63 cm (3.04 in ) 40mm 95,0 (3.74") _,D 2 2 50mm PULL 17,62 cm (2.73 in ) 65mm 75mm
"B" "C" "D"
6,0 (.24") 10,0 (.39") (2 PLACES)
Standard Threads "EM" Option R 1/8 (1/8-28 BSPT) 1/8-27 M12X1,75 1/2-13 M8X1,25 5/16-18
TYPE D 6,0 (.24") + STROKE
"A" + STROKE 31,3 (1.23") (2 PLACES)
63,0 (2.48") SQ.
17,5 (.69")
W
20,0 (.79") X
Z
23,0 (.91") Y
"D" TAP X 15,0 (.59") DP (4 PLACES)
L15
50
MODEL
BORE
x
"B" PORT (2 PLACES)
M STROKE
TYPE
MOUNTING MAGNETIC
15mm - 75mm STROKE (SEE STROKE RANGE) BLANK - NO CODE D - DOUBLE ROD
106
SENSOR TRACK (2 PLACES, 180° APART)
20mm (Ø.787") ROD "C" TAP
MB - BOTH END MOUNT MF - FRONT MOUNT MR - REAR MOUNT MS - SIDE MOUNT
OPTIONS
EM - INCH THREADS & PORT OPTIONS: RS - MALE STUD FOR ROD END (SEE PAGE 61 FOR DETAILS) RF, RH, RN, RT, RV, RY - ROD EXTENSIONS (SEE PAGE 61 FOR DETAILS)
SENSORS SOLD SEPARATELY SKS, SKP, SCS, SCP - SOLID STATE LIMIT SENSORS (SEE PAGE 54 FOR DETAILS)
Electroless nickel ductile cast iron piston (standard) or high-strength aluminum (magnetic option)
Magnetic sensor option or smooth exterior Inch or metric mounting and porting
Polyurethane piston seal with NBR energizer factory lubricated with PTFE impregnated grease
Electroless nickel ductile cast iron caps
Chrome-plated 1050 steel rod Optional magnetic piston or standard high compression wear strip
Anodized aluminum housing
Polyurethane or NBR cup seal (depending on bore size)
Common Features Nason’s L20 series hydraulic actuators were designed to be compact, long-lasting devices for today’s demanding design requirements. They are offered in single and double rod configurations with inch or metric mounting and ports.
chrome-plated 1050 steel riding in electroless nickel-plated ductile cast iron rod bearings. The piston on non-magnetic models is ductile cast iron with wear rings standard. The optional magnetic piston is manufactured from a high-strength aluminum. Rod wipers are standard on all models.
Compact Size Nason L20 series cylinders were designed with today’s automation equipment in mind. They offer more power in a smaller package than comparable NFPA style hydraulic cylinders without sacrificing performance.
Versatile Design The L20 series cylinders are metric in design (bore and rod sizes). They are offered in inch or metric mounting and porting. Due to their 100% machined design, they are easily customized by Nason.
Rugged Construction The L20 series incorporates thick-walled, anodized aluminum housing. The rods are
Rebuildable All L20 series cylinders are field-rebuildable.
L20 SERIES
L20 SERIES HYDRAULIC CYLINDERS
107
How to Order How to Order Example: Part Number: L20-25X50MB-EMRM
L20
-
MODEL
25
X
BORE
50 STROKE
MODEL L20 - Medium Pressure Cylinder
MB TYPE
-
EM
MOUNTING MAGNETIC
RM OPTIONS
MOUNTING MF - Threads on Front Face (Rod End) MR - Threads on Rear Face (Opposite Rod)
BORE
MB - Threads on Both Faces MT - Drilled Through and Counter bored for Bolt Clearance
25 - 25mm (.98") 32 - 32mm (1.26") 40 - 40mm (1.58") 50 - 50mm (1.97") 63 - 63mm (2.48")
MAGNETIC Blank (No Code) - Standard "NO MAGNET" Piston M - Magnetic Piston and Sensor Mounting
76 - 76mm (3.00") 101 - 101mm (4.00")
STROKE See Stroke Table
OPTIONS EM - Inch Threads (Mounting, Ports and Rods) RM - Rod Male Threads RF - 5mm (.197") Rod Extension RT - 10mm (.394") Rod Extension
TYPE Blank (NO CODE) - Double Acting, Single Rod D - Double Acting, Double Rod
108
RN - 15mm (.591") Rod Extension RY - 20mm (.787") Rod Extension RV - 25mm (.984") Rod Extension RH - 35mm (1.38") Rod Extension
Engineering Data
Packing:
Urethane and Buna N
Lubrication:
PTFE impregnated grease
Stroke Tolerance:
+1,0mm/-0mm (+0.04"/-0")
Piston Area Chart Bore
Stock Strokes PULL (ROD RETRACT)
PUSH (ROD EXTEND)
Bore
25
4,91cm (.76in2 )
3,37cm2 (.52in 2 )
25
32
2
5,50cm (.85in )
32
2
2
8,04cm (1.25in )
2
2
40
12,57cm (1.95in )
8,77cm (1.36in )
40
50
19,63cm (3.04in 2 )
13,48cm 2 (2.09in2 )
50
63
31,17cm (4.83in )
20,99cm (3.25in )
63
76
45,60cm2 (7.07in 2 )
29,70cm 2 (4.60in2 )
76
101
81,07cm (12.57in ) 56,44cm (8.75in )
2
2
2
2
2
2
2
2
2
2
2
2
2
Stroke
25mm, 50mm, 75mm, 100mm (.98", 1.96", 2.95", 3.93")
101 5mm increments available with additional lead time
Cylinder Output Force Formula Piston Area x Pressure = Output Force Piston Area(in2 ) x Pressure(PSI) = lbf (Pounds Force) Piston Area(cm2) x Pressure(kg/cm2 ) = kgf (Kilograms Force) Piston Area(cm2 ) x Pressure(kg/cm2 ) x 9.8 = Newtons Piston Area(cm2 ) x Pressure(Bar) x 10 = Newtons Piston Area(cm2 ) x Pressure(Bar) x 1.02 = kgf (Kilograms Force)
Cylinder Ratings Bore
Pressure
25
140 BAR (2030 PSI)
-10˚ C to 80˚ C (14˚ F to 176˚ F)
32
140 BAR (2030 PSI)
-10˚ C to 80˚ C (14˚ F to 176˚ F)
40
140 BAR (2030 PSI)
-23˚ C to 100˚ C (-10˚ F to 212˚ F)
Temperature
50
120 BAR (1740 PSI)
-23˚ C to 100˚ C (-10˚ F to 212˚ F)
63
100 BAR (1450 PSI)
-23˚ C to 100˚ C (-10˚ F to 212˚ F)
76
100 BAR (1450 PSI)
-23˚ C to 100˚ C (-10˚ F to 212˚ F)
101
100 BAR (1450 PSI)
-23˚ C to 100˚ C (-10˚ F to 212˚ F)
109
L20 25mm Bore Front Mount Cylinder "MF" MODEL TYPE
STANDARD STROKES
_,D
L20
"A"
25mm, 50mm, 75mm, 100mm 45,0(1.77")
50,8(2.000") SQ.
PISTON AREA PUSH 4,91 cm2 (0.76 in2 ) PULL 3,37 cm 2 (0.52 in 2 )
8,0(.315")
Standard Threads "EM" Option G1/8 #2 SAE M10X1,5 3/8-24 #10-32 M5X0,8
"B" "C" "D"
TYPE D 8,0(.315") + STK.
"A" + STROKE
36,0(1.417")
(See page 118 for restrictions on minimum double rod lengths.)
7,4(.291") 7,4(.291")
36,0(1.417")
SENSOR MOUNTING TRACK (2 PLACES, MAGNETIC CODE "M")
W
Rear Mount Cylinder "MR"
X
Z
Mount Both End Cylinder "MB"
8,0(.315") (TYP) Y
14,0(Ø.551") ROD W/ "C" TAP
"D" TAP X 10,5(.41") DP. (4 PLACES)
17,5(.689") (TYP)
"B" PORTS (2 PLACES)
Thru Mount Cylinder "MT" MODEL TYPE
STANDARD STROKES
_,D
L20
"A"
25mm, 50mm, 75mm, 100mm
45,0(1.77")
PISTON AREA PUSH 4,91 cm 2 (0.76 in 2 ) PULL 3,37 cm 2 (0.52 in 2 )
50,8(2.000") SQ.
7,4(.291") (TYP)
Standard Threads G1/8 M10X1,5
"A" + STROKE
36,0(1.417") (TYP)
7,4(.291") (TYP)
36,0(1.417") (TYP)
8,0(.315")
"B" "C"
TYPE D 8,0(.315") + STK.
"EM" Option #2 SAE 3/8-24
(See page 118 for restrictions on minimum double rod lengths.)
SENSOR MOUNTING TRACK (2 PLACES, MAGNETIC CODE "M")
W
Z
X
8,0(.315") (TYP)
L20 MODEL
-
25 BORE
5,5(Ø.22") DRILL THRU (4 PLACES) 9,5(Ø.37") C'BORE X 5,4(.21") DP. (8 PLACES, 4 PER END)
Y
14,0(Ø.551") ROD W/ "C" TAP
"B" PORTS (2 PLACES)
X
STROKE
TYPE
MOUNTING
25mm, 50mm, 75mm, 100mm BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD (See page 118 for restrictions on minimum double rod lengths.) MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH MOUNT
110
17,5(.689") (TYP)
MAGNETIC
OPTIONS
EM - INCH THREADS & PORT OPTIONS RM - ROD MALE THREADS RF, RT, RN, RY, RV, RH - ROD EXTENSIONS (SEE PAGE 118) BLANK - NO CODE, NON-MAGNETIC M - MAGNETIC PISTON
L20 32mm Bore Front Mount Cylinder "MF" MODEL TYPE _,D
L20
STANDARD STROKES
"A"
25mm, 50mm, 75mm, 100mm
51,0(2.01")
10,0(.394")
63,5(2.500") SQ. 8,25(.325")
"A" + STROKE
Standard Threads G1/4 M12X1,75 M6X1
"B" "C" "D"
TYPE D 10,0(.394") + STK.
"EM" Option #4 SAE 7/16-20 1/4-28
(See page 118 for restrictions on minimum double rod lengths.)
47,0(1.850")
8,25 (.325")
47,0 (1.850")
PISTON AREA PUSH 8,04 cm2 (1.25 in2 ) PULL 5,50 cm2 (0.85 in2 )
SENSOR MOUNTING TRACK (2 PLACES, MAGNETIC CODE "M")
W
Z
Rear Mount Cylinder "MR"
X
Mount Both End Cylinder "MB"
11,0(.433") (TYP) Y
18,0(Ø.709") ROD "C" TAP
20,5(.807") (TYP)
"D" TAP X 12,5(.49") DP. (4 PLACES)
"B" PORTS (2 PLACES)
Thru Mount Cylinder "MT" MODEL TYPE L20
_,D
STANDARD STROKES
"A"
25mm, 50mm, 75mm, 100mm
51,0(2.01")
PISTON AREA PUSH 8,04 cm 2 (1.25 in 2) PULL 5,50 cm 2 (0.85 in2 )
10,0(.394")
63,5(2.500") SQ. 8,25(.325") (TYP)
47,0(1.850") (TYP)
"A" + STROKE
47,0(1.850") (TYP)
8,25 (.325") (TYP)
"B" "C"
Standard Threads G1/4 M12X1,75 TYPE D 10,0(.394") + STK.
"EM" Option #4 SAE 7/16-20
(See page 118 for restrictions on minimum double rod lengths.)
SENSOR MOUNTING TRACK (2 PLACES, MAGNETIC CODE "M")
W
Z
X 11,0(.433") (TYP) Y
18,0(Ø.709") ROD "C" TAP
L20 MODEL
-
32 BORE
7,0(Ø.28") DRILL THRU (4 PLACES) 11,0(Ø.43") C'BORE X 6,5(.26") DP. (8 PLACES, 4 PER END)
20,5(.807") (TYP)
"B" PORTS (2 PLACES)
X
STROKE
TYPE
MOUNTING
MAGNETIC
OPTIONS
EM - INCH THREADS & PORT OPTIONS
25mm, 50mm, 75mm, 100mm BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD (See page 118 for restrictions on minimum double rod lengths.) MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH MOUNT
RM - ROD MALE THREADS RF, RT, RN, RY, RV, RH - ROD EXTENSIONS (SEE PAGE 118) BLANK - NO CODE, NON-MAGNETIC M - MAGNETIC PISTON
111
L20 40mm Bore Front Mount Cylinder "MF" MODEL TYPE _,D
L20
STANDARD STROKES
"A"
25mm, 50mm, 75mm, 100mm
69,85(2.750") SQ. 8,9(.351")
PISTON AREA PUSH 12,57 cm2 (1.95 in2 ) PULL 8,77 cm2 (1.36 in2 )
55,0(2.17")
"A" + STROKE
10,0(.394")
52,0(2.047")
Standard Threads G1/4 M16X2 M8X1.25
TYPE D 10,0(Ø.394") + STK.
"EM" Option #4 SAE 5/8-18 5/16-24
(See page 118 for restrictions on minimum double rod lengths.)
SENSOR MOUNTING TRACK (2 PLACES, MAGNETIC CODE "M")
W
8,9(.351")
"B" "C" "D"
Rear Mount Cylinder "MR"
52,0(2.047")
Z
X
Mount Both End Cylinder "MB"
12,0(.472") (TYP) Y
22,0(Ø.866") ROD "C" TAP
"B" PORTS (2 PLACES)
21,0(.827") (TYP)
"D" TAP X 16,6(.65") DP. (4 PLACES)
Thru Mount Cylinder "MT" MODEL TYPE L20
_,D
STANDARD STROKES 25mm, 50mm, 75mm, 100mm
"A" 55,0(2.17")
Standard Threads G1/4 M16X2 TYPE D 10,0(Ø.394") + STK.
"EM" Option #4 SAE 5/8-18
(See page 118 for restrictions on minimum double rod lengths.)
52,0(2.047") (TYP)
8,9(.351") (TYP)
52,0(2.047") (TYP)
"B" "C"
"A" + STROKE
10,0(.394")
69,85(2.750") SQ. 8,9(.351") (TYP)
PISTON AREA PUSH 12,57 cm 2 (1.95 in2 ) PULL 8,77 cm2 (1.36 in2 )
W
Z
SENSOR MOUNTING TRACK (2 PLACES, MAGNETIC CODE "M")
X 12,0(.472") (TYP) Y
22,0(Ø.866") ROD "C" TAP
L20 MODEL
-
40 BORE
21,0(.827") 9,0(Ø.35") DRILL THRU (TYP) (4 PLACES) 14,0(Ø.55") C'BORE X 8,6(.34") DP. (8 PLACES, 4 PER END)
X
STROKE
TYPE
MOUNTING
MAGNETIC
OPTIONS
EM - INCH THREADS & PORT OPTIONS
25mm, 50mm, 75mm, 100mm BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD (See page 118 for restrictions on minimum double rod lengths.)
112
"B" PORTS (2 PLACES)
MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH MOUNT
RM - ROD MALE THREADS RF, RT, RN, RY, RV, RH - ROD EXTENSIONS (SEE PAGE 118)
BLANK - NO CODE, NON-MAGNETIC M - MAGNETIC PISTON
L20 50mm Bore Front Mount Cylinder "MF" MODEL TYPE _,D
L20
STANDARD STROKES
"A"
25mm, 50mm, 75mm, 100mm
60,0(2.36")
"A" + STROKE
11,0(.433")
82,55(3.250") SQ. 12,3(.483")
PISTON AREA PUSH 19,63 cm2 (3.04 in2 ) PULL 13,48 cm2 (2.09 in2 )
Standard Threads G1/4 M20X2.5 M10X1.5
"B" "C" "D" TYPE D 11,0(.433") + STK.
"EM" Option #4 SAE 3/4-16 3/8-24
(See page 118 for restrictions on minimum double rod lengths.)
58,0(2.283") W
12,3(.483")
SENSOR MOUNTING TRACK (2 PLACES, MAGNETIC CODE "M")
58,0(2.283") Z
X
Rear Mount Cylinder "MR"
Mount Both End Cylinder "MB"
14,0(.551") (TYP)
Y
28,0(Ø1.102") ROD "C" TAP
22,5(.886") (TYP)
"D" TAP X 20,8(.82") DP. (4 PLACES)
"B" PORTS (2 PLACES)
Thru Mount Cylinder "MT" MODEL TYPE _,D
L20
STANDARD STROKES
"A"
25mm, 50mm, 75mm, 100mm
60,0(2.36")
11,0(.433")
82,55(3.250") SQ. 12,3(.483") (TYP)
"B" "C"
"A" + STROKE
Standard Threads G1/4 M20X2.5
TYPE D 11,0(.433") + STK.
"EM" Option #4 SAE 3/4-16
(See page 118 for restrictions on minimum double rod lengths.)
58,0(2.283") (TYP)
12,3(.483") (TYP)
58,0(2.283") (TYP)
PISTON AREA PUSH 19,63 cm2 (3.04 in2 ) PULL 13,48 cm2 (2.09 in2 )
SENSOR MOUNTING TRACK (2 PLACES, MAGNETIC CODE "M")
W
Z
X 14,0(.551") (TYP)
28,0(Ø1.102") ROD "C" TAP
L20 MODEL
-
50 BORE
Y
22,5(.886") 11,0(Ø.43") DRILL THRU (TYP) (4 PLACES) 17,5(Ø.69") C'BORE X 10,8(.43") DP. (8 PLACES, 4 PER END)
"B" PORTS (2 PLACES)
X
STROKE
TYPE
MOUNTING
MAGNETIC
OPTIONS
EM - INCH THREADS & PORT OPTIONS
25mm, 50mm, 75mm, 100mm BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD (See page 118 for restrictions on minimum double rod lengths.) MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH MOUNT
RM - ROD MALE THREADS RF, RT, RN, RY, RV, RH - ROD EXTENSIONS (SEE PAGE 118) BLANK - NO CODE, NON-MAGNETIC M - MAGNETIC PISTON
113
L20 63mm Bore Front Mount Cylinder "MF" MODEL TYPE
"A"
STANDARD STROKES
_,D
L20
25mm, 50mm, 75mm, 100mm
67,0(2.64")
95,25(3.750") SQ. 13,1(.517")
PISTON AREA PUSH 31,17 cm2 (4.83 in2 ) PULL 20,99 cm2 (3.25 in2 )
13,0(.512")
"B" "C" "D"
TYPE D 13,0(.512") + STK.
"A" + STROKE
Standard Threads G1/4 M27X3 M12X1.75
"EM" Option #4 SAE 1-14 1/2-20
(See page 118 for restrictions on minimum double rod lengths.)
69,0(2.717") W
13,1(.517")
SENSOR MOUNTING TRACK (2 PLACES, MAGNETIC CODE "M")
69,0(2.717") Z
X
Rear Mount Cylinder "MR"
17,0(.669") (TYP) Y
36,0(Ø1.417") ROD "C" TAP
"D" TAP X 24,9(.98") DP. (4 PLACES)
Mount Both End Cylinder "MB"
26,0(1.024") (TYP)
"B" PORTS (2 PLACES)
Thru Mount Cylinder "MT" MODEL TYPE _,D
L20
"A"
STANDARD STROKES 25mm, 50mm, 75mm, 100mm
67,0(2.64")
95,25(3.750") SQ. 13,1(.517") (TYP)
13,0(.512")
"B" "C"
"A" + STROKE
Standard Threads G1/4 M27X3 TYPE D 13,0(.512") + STK.
"EM" Option #4 SAE 1-14
(See page 118 for restrictions on minimum double rod lengths.)
69,0(2.717") (TYP)
13,1(.517") (TYP)
69,0(2.717") (TYP)
PISTON AREA PUSH 31,17 cm2 (4.83 in2 ) PULL 20,99 cm2 (3.25 in2 )
W
Z
SENSOR MOUNTING TRACK (2 PLACES, MAGNETIC CODE "M")
X 17,0(.669") (TYP)
Y
36,0(Ø1.417") ROD "C" TAP
L20 MODEL
-
63 BORE
26,0(1.024") 13,5(Ø.53") DRILL THRU (TYP) (4 PLACES) 20,0(Ø.79") C'BORE X 13,0(.51") DP. (8 PLACES, 4 PER END)
X
STROKE
TYPE
MOUNTING
MAGNETIC
OPTIONS
EM - INCH THREADS & PORT OPTIONS
25mm, 50mm, 75mm, 100mm BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD (See page 118 for restrictions on minimum double rod lengths.) MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH MOUNT
114
"B" PORTS (2 PLACES)
RM - ROD MALE THREADS RF, RT, RN, RY, RV, RH - ROD EXTENSIONS (SEE PAGE 118) BLANK - NO CODE, NON-MAGNETIC M - MAGNETIC PISTON
L20 76mm Bore Front Mount Cylinder "MF" MODEL TYPE _,D
L20
"A"
STANDARD STROKES 25mm, 50mm, 75mm, 100mm
78,0(3.07")
"B" "C" "D"
TYPE D 17,0(.669") + STK.
"A" + STROKE
17,0(.669")
114,3(4.500") SQ. 14,2(.557")
PISTON AREA PUSH 45,60 cm2 (7.07 in2 ) PULL 29,70 cm2 (4.60 in2 )
86,0(3.386")
SENSOR MOUNTING TRACK (2 PLACES, MAGNETIC CODE "M")
W 14,2(.557")
86,0(3.386") Z
Standard Threads G3/8 M33X3.5 M14X2
"EM" Option #6 SAE 1 1/4-12 5/8-18
(See page 118 for restrictions on minimum double rod lengths.)
Rear Mount Cylinder "MR"
X
Mount Both End Cylinder "MB"
20,0(.787") (TYP) Y
45,0(Ø1.772") ROD "C" TAP
"D" TAP X 29,0(1.14") DP. (4 PLACES)
"B" PORTS (2 PLACES)
29,5(1.161") (TYP)
Thru Mount Cylinder "MT" MODEL TYPE L20
_,D
STANDARD STROKES 25mm, 50mm, 75mm, 100mm
"A"
PISTON AREA PUSH 45,60 cm2 (7.07 in2) PULL 29,70 cm2 (4.60 in2)
78,0(3.07")
14,2(.557") (TYP)
86,0(3.386") (TYP)
14,2(.557") (TYP)
86,0(3.386") (TYP)
"A" + STROKE
17,0(.669")
114,3(4.500") SQ.
W
"B" "C"
Standard Threads "EM" Option G3/8 #6 SAE M33X3.5 1 1/4-12 TYPE D 17,0(.669") + STK.
(See page 118 for restrictions on minimum double rod lengths.)
SENSOR MOUNTING TRACK (2 PLACES, MAGNETIC CODE "M")
Z
X 20,0(.787") (TYP) Y
45,0(Ø1.772") ROD "C" TAP
L20 MODEL
-
76 BORE
29,5(1.161") (TYP) 16,0(Ø.63") DRILL THRU (4 PLACES) 23,0(Ø.91") C'BORE X 15,2(.60") DP. (8 PLACES, 4 PER END)
"B" PORTS (2 PLACES)
X
STROKE
TYPE
MOUNTING
MAGNETIC
OPTIONS EM - INCH THREADS & PORT OPTIONS
25mm, 50mm, 75mm, 100mm BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD (See page 118 for restrictions on minimum double rod lengths.) MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH MOUNT
RM - ROD MALE THREADS RF, RT, RN, RY, RV, RH - ROD EXTENSIONS (SEE PAGE 118)
BLANK - NO CODE, NON-MAGNETIC M - MAGNETIC PISTON
115
L20 101mm Bore Front Mount Cylinder "MF" MODEL TYPE
STANDARD STROKES
_,D
L20
"A"
25mm, 50mm, 75mm, 100mm
PISTON AREA PUSH 81,07 cm 2 (12.57 in 2 ) PULL 56,44 cm 2 (8.75 in2 )
96,0(3.78")
26,0(1.024")
139,7(5.500") SQ.
"B" "C" "D"
TYPE D 26,0(1.024") + STK.
"A" + STROKE
Standard Threads "EM" Option G3/8 #6 SAE 1 1/2-12 M42X4.5 M16X2 5/8-18 (See page 118 for restrictions on minimum double rod lengths.)
106,0(4.173")
16,9(.663")
W
SENSOR MOUNTING TRACK (2 PLACES, MAGNETIC CODE "M")
16,9(.663")
106,0(4.173") Z
Rear Mount Cylinder "MR"
X
Mount Both End Cylinder "MB"
25,0(.984") (TYP) Y
56,0(Ø2.205") ROD "C" TAP
"D" TAP X 39,0(1.54") DP. (4 PLACES)
35,0(1.378") (TYP)
"B" PORTS (2 PLACES)
Thru Mount Cylinder "MT" MODEL TYPE L20
STANDARD STROKES
_,D
"A"
25mm, 50mm, 75mm, 100mm
16,9(.663") (TYP)
96,0(3.78")
PISTON AREA PUSH 81,07 cm 2 (12.57 in2 ) PULL 56,44 cm 2 (8.75 in2 )
139,7(5.500") SQ.
26,0(1.024")
106,0(4.173") (TYP)
35,0(1.378") (TYP)
16,9(.663") (TYP)
W
"B" "C"
"A" + STROKE
Standard Threads G3/8 M42X4.5 TYPE D 26,0(1.024") + STK.
"EM" Option #6 SAE 1 1/2-12
(See page 118 for restrictions on minimum double for lengths)
SENSOR MOUNTING TRACK (2 PLACES, MAGNETIC CODE "M")
106,0(4.173") Z (TYP)
X 25,0(.984") (TYP) Y
56,0(Ø2.205") ROD "C" TAP
L20 MODEL
-
101
18,0(Ø.71") DRILL THRU (4 PLACES) 26,0(Ø1.02") C'BORE X 17,5(.69") DP. (8 PLACES, 4 PER END)
X
BORE
STROKE
TYPE
MOUNTING
25mm, 50mm, 75mm, 100mm BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD (See page 118 for restrictions on minimum double rod lengths.) MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH MOUNT
116
"B" PORTS (2 PLACES)
35,0(1.378") (TYP)
MAGNETIC
OPTIONS
EM - INCH THREADS & PORT OPTIONS RM - ROD MALE THREADS RF, RT, RN, RY, RV, RH - ROD EXTENSIONS (SEE PAGE 118) BLANK - NO CODE, NON-MAGNETIC M - MAGNETIC PISTON
Rod End Options Male Thread Option - "RM" Bore 25 32 40 50 63 76 101
"A" M10X1.25 M12X1.25 M16X1.5 M20X1.5 M27X2 M33X2 M42X2
"B" 16 (.63") 18 (.71") 22 (.87") 28 (1.10") 36 (1.42") 45 (1.77") 56 (2.20")
"EM" Option 1/2-20 9/16-18 3/4-16 7/8-14 1 1/4-12 1 1/2-12 1 3/4-12
"B" 18 (.71") 25 (.98") 30 (1.18") 35 (1.38") 45 (1.77") 56 (2.20") 70 (2.76")
"B"
Dimensions above are the same for double rod cylinders.
"A" MALE THREAD (ALSO AVAILABLE WITH "EM" OPTION)
Rod End Detail See Chart Below Bore 25 32 40 50 63 76 101
Ø"A" 13 (.51") 17 (.67") 21 (.83") 27 (1.06") 35 (1.38") 43 (1.69") 54 (2.13")
"B" 6 (.24") 8 (.31") 8 (.31") 9 (.35") 11 (.43") 13 (.51") 22 (.87")
STD. EXTENSION
"C" 12 (.47") 15 (.59") 19 (.75") 24 (.94") 32 (1.26") 39 (1.54") 48 (1.89")
"B"
Dimensions above are the same for double rod cylinders.
Ø"A" "C" WRENCH FLATS
117
Rod Extensions Rod Extensions Option - See Chart Below Extensions
"RF"
"RT"
"RN"
Length
5 (.20")
10 (.39")
15 (.59")
"RY"
"RV"
"RH"
20 (.79")
25 (.98")
35 (1.38")
For standard extension, see catalog pages. If cylinder is double ended, extension will be on both ends. Consult factory for single ended extension on a double ended cylinder.
STD. EX.
"EXTENSION"
STD. EX. + STROKE "EXTENSION" TYPE "D" CYLINDER
Minimum Rod Extension for Double Rod Option (Type "D") - See Chart Below Standard double rod cylinders must have "X" dimensions greater than or equal to those listed in the table below. Corresponding rod extensions will be added to cylinders which do not meet this minimum length, so that standard extension plus stroke adds up to "X" MIN. This applies only to rear rod. Bore 25 32 40 50 63 76 101
STD. Ex. 8 (.31") 10 (.39") 10 (.39") 11 (.43") 13 (.51") 17 (.67") 26 (1.02")
"X" MIN 23 (.91") 25 (.98") 30 (1.18") 31 (1.22") 38 (1.50") 42 (1.65") 51 (2.00")
STD. EX.
TYPE "D" CYLINDER
For Strokes Less Than 15 (.59") 15 (.59") 20 (.79") 20 (.79") 25 (.98") 25 (.98") 25 (.98")
*Single rod cylinders and cylinders with "RM" rod male thread option do not have this restriction. "X" MIN
118
Polyurethane piston seal with NBR energizer factory lubricated with PTFE impregnated grease Electroless nickel ductile cast iron piston Inch or metric mounting and porting
High compression wear strip
Electroless nickel ductile cast iron caps
Chrome-plated 1050 steel rod Black oxide steel housing
Polyurethane or NBR cup seal (depending on bore size)
Common Features Nason’s L30 series hydraulic actuators were designed to be compact, long-lasting devices for today’s demanding design requirements. They are offered in single and double rod configurations with inch or metric mounting and ports. Compact Size Nason L30 series cylinders were designed with today’s automation equipment in mind. They offer more power in a smaller package than comparable NFPA style hydraulic cylinders without sacrificing performance. Rugged Construction The L30 series incorporates thick-walled
steel housing. The rods are chrome-plated 1050 steel riding in electroless nickelplated ductile cast iron rod bearings. The piston is ductile cast iron with wear rings standard. Rod wipers are standard on all models. Versatile Design The L30 series cylinders are metric in design (bore and rod sizes). They are offered in inch or metric mounting and porting. Due to their 100% machined design, they are easily customized by Nason. Rebuildable All L30 series cylinders are field-rebuildable.
L30 SERIES
L30 SERIES HYDRAULIC CYLINDERS
119
How to Order How to Order Example: Part Number: L30-25X50MB-EMRM
L30
-
MODEL
25
X
BORE
50 STROKE
MODEL
L30 - High Pressure Cylinder
MB TYPE
-
MOUNTING
EM
RM OPTIONS
MOUNTING
MF - Threads on Front Face (Rod End)
MR - Threads on Rear Face (Opposite Rod)
BORE
MB - Threads on Both Faces MT - Drilled Through and Counter bored for Bolt Clearance
25 - 25mm (.98")
32 - 32mm (1.26") 40 - 40mm (1.58") 50 - 50mm (1.97")
OPTIONS
63 - 63mm (2.48")
EM - Inch Threads (Mounting, Ports and Rods) RM - Rod Male Threads
76 - 76mm (3.00")
RF - 5mm (.197") Rod Extension RT - 10mm (.394") Rod Extension
STROKE
See Stroke Table
TYPE Blank (NO CODE) - Double Acting, Single Rod D - Double Acting, Double Rod
120
RN - 15mm (.591") Rod Extension RY - 20mm (.787") Rod Extension RV - 25mm (.984") Rod Extension RH - 35mm (1.38") Rod Extension
Engineering Data
Packing:
Urethane and Buna N
Lubrication:
PTFE impregnated grease
Stroke Tolerance:
+0,75mm/-0mm (+0.03"/-0")
Piston Area Chart Bore
PUSH (ROD EXTEND)
Stock Strokes PULL (ROD RETRACT)
Bore
25
4,91cm (.76in2 )
3,37cm2 (.52in2 )
25
2
5,50cm (.85in )
32
2
2
32
8,04cm (1.25in )
40
12,57cm (1.95in 2 )
50
2
2
2
8,77cm2 (1.36in2 )
40
19,63cm (3.04in )
13,48cm (2.09in )
50
63
31,17cm2 (4.83in2 )
20,99cm2 (3.25in2 )
63
76
45,60cm2 (7.07in2 )
29,70cm2 (4.60in2 )
76
2
2
2
2
Stroke
25mm, 50mm, 75mm, 100mm (.98", 1.96", 2.95", 3.93")
5mm increments available with additional lead time
Cylinder Output Force Formula Piston Area x Pressure = Output Force Piston Area(in2 ) x Pressure(PSI) = lbf (Pounds Force) Piston Area(cm2 ) x Pressure(kg/cm2 ) = kgf (Kilograms Force) Piston Area(cm2 ) x Pressure(kg/cm2 ) x 9.8 = Newtons Piston Area(cm2 ) x Pressure(Bar) x 10 = Newtons Piston Area(cm2 ) x Pressure(Bar) x 1.02 = kgf (Kilograms Force)
Cylinder Ratings Bore
Pressure
Temperature
25
206 BAR (3000 PSI)
-10˚ C to 80˚ C (14˚ F to 176˚ F)
32
206 BAR (3000 PSI)
-10˚ C to 80˚ C (14˚ F to 176˚ F)
40
206 BAR (3000 PSI)
-23˚ C to 100˚ C (-10˚ F to 212˚ F)
50
206 BAR (3000 PSI)
-23˚ C to 100˚ C (-10˚ F to 212˚ F)
63
206 BAR (3000 PSI)
-23˚ C to 100˚ C (-10˚ F to 212˚ F)
76
206 BAR (3000 PSI)
-23˚ C to 100˚ C (-10˚ F to 212˚ F)
121
Front Mount Cylinder "MF" MODEL TYPE
STANDARD STROKES
_,D
L30
25mm, 50mm, 75mm, 100mm
50,8(2.000") SQ.
"A"
PISTON AREA PUSH 4,91 cm2 (0.76 in2 ) PULL 3,37 cm 2 (0.52 in2 )
45,0(1.77")
8,0(.315")
"A" + STROKE
36,0(1.417")
Standard Threads G1/8 M10X1,5 M5X0,8
"B" "C" "D"
TYPE D 8,0(.315") + STK.
"EM" Option #2 SAE 3/8-24 #10-32
(See page 129 for restrictions on minimum double rod lengths.)
7,4(.291") 7,4(.291")
36,0(1.417")
Rear Mount Cylinder "MR"
W
Z
X
Mount Both End Cylinder "MB"
8,0(.315") (TYP) Y
14,0(Ø.551") ROD W/ "C" TAP
"D" TAP X 10,5(.41") DP. (4 PLACES)
17,5(.689") (TYP)
"B" PORTS (2 PLACES)
Thru Mount Cylinder "MT" MODEL TYPE _,D
L30
STANDARD STROKES
"A"
25mm, 50mm, 75mm, 100mm
45,0(1.77")
PISTON AREA PUSH 4,91 cm2 (0.76 in2 ) PULL 3,37 cm2 (0.52 in2 )
50,8(2.000") SQ.
"A" + STROKE
36,0(1.417") (TYP)
7,4(.291") (TYP) 7,4(.291") (TYP)
36,0(1.417") (TYP)
8,0(.315")
"B" "C"
Standard Threads G1/8 M10X1,5
TYPE D 8,0(.315") + STK.
(See page 129 for restrictions on minimum double rod lengths.)
W
Z
X 8,0(.315") (TYP)
14,0(Ø.551") ROD W/ "C" TAP
L30 MODEL
-
25 BORE
5,5(Ø.22") DRILL THRU (4 PLACES) 9,5(Ø.37") C'BORE X 5,4(.21") DP. (8 PLACES, 4 PER END)
Y
X
"B" PORTS (2 PLACES)
STROKE
TYPE
MOUNTING
OPTIONS
EM - INCH THREADS & PORT OPTIONS
25mm, 50mm, 75mm, 100mm BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD (See page 129 for restrictions on minimum double rod lengths.) MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH MOUNT
122
17,5(.689") (TYP)
"EM" Option #2 SAE 3/8-24
RM - ROD MALE THREADS RF, RT, RN, RY, RV, RH - ROD EXTENSIONS (SEE PAGE 129)
Front Mount Cylinder "MF" MODEL TYPE _,D
L30
STANDARD STROKES
"A"
25mm, 50mm, 75mm, 100mm
51,0(2.01")
Standard Threads G1/4 M12X1,75 M6X1
"B" "C" "D" TYPE D 10,0(.394") + STK.
"A" + STROKE
10,0(.394")
63,5(2.500") SQ.
"EM" Option #4 SAE 7/16-20 1/4-28
(See page 129 for restrictions on minimum double rod lengths.)
47,0(1.850")
8,25(.325") 8,25 (.325")
47,0 (1.850")
PISTON AREA PUSH 8,04 cm 2 (1.25 in2 ) PULL 5,50 cm 2 (0.85 in2 )
W
Rear Mount Cylinder "MR"
Z
X
Mount Both End Cylinder "MB"
11,0(.433") (TYP)
18,0(Ø.709") ROD "C" TAP
Y
"D" TAP X 12,5(.49") DP. (4 PLACES)
20,5(.807") (TYP)
"B" PORTS (2 PLACES)
Thru Mount Cylinder "MT" MODEL TYPE _,D
L30
STANDARD STROKES
"A"
25mm, 50mm, 75mm, 100mm
51,0(2.01")
Standard Threads G1/4 M12X1,75
TYPE D 10,0(.394") + STK.
47,0(1.850") (TYP)
8,25 (.325") (TYP)
47,0(1.850") (TYP)
"B" "C"
"A" + STROKE
10,0(.394")
63,5(2.500") SQ. 8,25(.325") (TYP)
PISTON AREA PUSH 8,04 cm 2 (1.25 in2 ) PULL 5,50 cm 2 (0.85 in2 )
"EM" Option #4 SAE 7/16-20
(See page 129 for restrictions on minimum double rod lengths.)
W
Z
X 11,0(.433") (TYP)
18,0(Ø.709") ROD "C" TAP
L30 MODEL
-
32 BORE
Y
20,5(.807") 7,0(Ø.28") DRILL THRU (TYP) (4 PLACES) 11,0(Ø.43") C'BORE X 6,5(.26") DP. (8 PLACES, 4 PER END)
X
"B" PORTS (2 PLACES)
STROKE
TYPE
MOUNTING
OPTIONS
EM - INCH THREADS & PORT OPTIONS
25mm, 50mm, 75mm, 100mm BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD (See page 129 for restrictions on minimum double rod lengths.) MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH MOUNT
RM - ROD MALE THREADS RF, RT, RN, RY, RV, RH - ROD EXTENSIONS (SEE PAGE 129)
123
Front Mount Cylinder "MF" MODEL TYPE _,D
L30
STANDARD STROKES
"A"
25mm, 50mm, 75mm, 100mm
55,0(2.17")
69,85(2.750") SQ. 8,9(.351")
PISTON AREA PUSH 12,57 cm 2 (1.95 in2 ) PULL 8,77 cm2 (1.36 in2 )
"A" + STROKE
10,0(.394")
52,0(2.047")
"B" "C" "D"
Standard Threads "EM" Option G1/4 #4 SAE M16X2 5/8-18 M8X1.25 5/16-24
TYPE D 10,0(Ø.394") + STK.
(See page 129 for restrictions on minimum double rod lengths.)
W
8,9(.351")
Rear Mount Cylinder "MR"
Z
52,0(2.047")
X
Mount Both End Cylinder "MB"
12,0(.472") (TYP) Y
22,0(.866") ROD "C" TAP
"D" TAP X 16,6(.65") DP. (4 PLACES)
"B" PORTS (2 PLACES)
21,0(.827") (TYP)
Thru Mount Cylinder "MT" MODEL TYPE _,D
L30
STANDARD STROKES
"A"
25mm, 50mm, 75mm, 100mm
55,0(2.17")
"B" "C"
"A" + STROKE
10,0(.394")
69,85(2.750") SQ.
Standard Threads "EM" Option G1/4 #4 SAE M16X2 5/8-18 TYPE D 10,0(Ø.394") + STK.
(See page 129 for restrictions on minimum double rod lengths.)
52,0(2.047") (TYP)
8,9(.351") (TYP) 8,9(.351") (TYP)
52,0(2.047") (TYP)
PISTON AREA PUSH 12,57 cm2 (1.95 in 2) PULL 8,77 cm2 (1.36 in2 )
W
Z
X
12,0(.472") (TYP) Y
22,0(.866") ROD "C" TAP
L30 MODEL
-
40 BORE
9,0(Ø.35") DRILL THRU 21,0(.827") (4 PLACES) (TYP) 14,0(Ø.55") C'BORE X 8,6(.34") DP. (8 PLACES, 4 PER END)
X
STROKE
TYPE
MOUNTING
OPTIONS
EM - INCH THREADS & PORT OPTIONS
25mm, 50mm, 75mm, 100mm BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD (See page 129 for restrictions on minimum double rod lengths.) MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH MOUNT
124
"B" PORTS (2 PLACES)
RM - ROD MALE THREADS RF, RT, RN, RY, RV, RH - ROD EXTENSIONS (SEE PAGE 129)
Front Mount Cylinder "MF" MODEL TYPE L30
_,D
STANDARD STROKES 25mm, 50mm, 75mm, 100mm
PISTON AREA PUSH 19,63 cm2 (3.04 in2 ) PULL 13,48 cm 2 (2.09 in2 )
11,0(.433")
82,55(3.250") SQ. 12,3(.483")
"A" 60,0(2.36")
"A" + STROKE
"B" "C" "D"
Standard Threads "EM" Option G1/4 #4 SAE M20X2.5 3/4-16 M10X1.5 3/8-24
TYPE D 11,0(.433") + STK.
(See page 129 for restrictions on minimum double rod lengths.)
58,0(2.283")
Rear Mount Cylinder "MR"
12,3(.483")
58,0(2.283") 14,0(.551") (TYP)
28,0(Ø1.102") ROD "C" TAP
"D" TAP X 20,8(.82") DP. (4 PLACES)
Mount Both End Cylinder "MB"
22,5(.886") (TYP)
"B" PORTS (2 PLACES)
Thru Mount Cylinder "MT" MODEL TYPE L30
_,D
STANDARD STROKES 25mm, 50mm, 75mm, 100mm
"A"
PISTON AREA PUSH 19,63 cm2 (3.04 in2 ) PULL 13,48 cm 2 (2.09 in2 )
60,0(2.36")
12,3(.483") (TYP)
"A" + STROKE
11,0(.433")
82,55(3.250") SQ.
"B" "C"
Standard Threads G1/4 M20X2.5 TYPE D 11,0(.433") + STK.
"EM" Option #4 SAE 3/4-16
(See page 129 for restrictions on minimum double rod lengths.)
58,0(2.283") (TYP)
12,3(.483") (TYP)
58,0(2.283") (TYP) 14,0(.551") (TYP)
22,5(.886") 11,0(Ø.43") DRILL THRU (TYP) (4 PLACES) 17,5(Ø.69") C'BORE X 10,8(.43") DP. (8 PLACES, 4 PER END)
28,0(Ø1.102") ROD "C" TAP
L30 MODEL
-
50 BORE
X
"B" PORTS (2 PLACES)
STROKE
TYPE
MOUNTING
OPTIONS
EM - INCH THREADS & PORT OPTIONS
25mm, 50mm, 75mm, 100mm BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD (See page 129 for restrictions on minimum double rod lengths.) MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH MOUNT
RM - ROD MALE THREADS RF, RT, RN, RY, RV, RH - ROD EXTENSIONS (SEE PAGE 129)
125
L30 63mm Bore Front Mount Cylinder "MF" MODEL TYPE _,D
L30
STANDARD STROKES
"A"
25mm, 50mm, 75mm, 100mm
67,0(2.64")
95,25(3.750") SQ. 13,1(.517")
PISTON AREA PUSH 31,17 cm2 (4.83 in2 ) PULL 20,99 cm 2 (3.25 in2 )
TYPE D 13,0(.512") + STK.
"A" + STROKE
13,0(.512")
"B" "C" "D"
Standard Threads "EM" Option G1/4 #4 SAE M27X3 1-14 M12X1.75 1/2-20 (See page 129 for restrictions on minimum double rod lengths.)
69,0(2.717") W
Rear Mount Cylinder "MR"
13,1(.517")
69,0(2.717") Z
X 17,0(.669") (TYP) Y
36,0(Ø1.417") ROD "C" TAP
"D" TAP X 24,9(.98") DP. (4 PLACES)
Mount Both End Cylinder "MB"
26,0(1.024") (TYP)
"B" PORTS (2 PLACES)
Thru Mount Cylinder "MT" MODEL TYPE
STANDARD STROKES
_,D
L30
"A"
25mm, 50mm, 75mm, 100mm
67,0(2.64")
PISTON AREA PUSH 31,17 cm2 (4.83 in2 ) PULL 20,99 cm 2 (3.25 in2 ) 13,0(.512")
95,25(3.750") SQ. 13,1(.517") (TYP)
Standard Threads "EM" Option G1/4 #4 SAE M27X3 1-14 TYPE D 13,0(.512") + STK.
"A" + STROKE
(See page 129 for restrictions on minimum double rod lengths.)
69,0(2.717") (TYP)
13,1(.517") (TYP)
69,0(2.717") (TYP)
"B" "C"
W
Z
X
17,0(.669") (TYP)
L30 MODEL
-
26,0(1.024") 13,5(Ø.53") DRILL THRU (TYP) (4 PLACES) 20,0(Ø.79") C'BORE X 13,0(.51") DP. (8 PLACES, 4 PER END)
Y
36,0(Ø1.417") ROD "C" TAP
63 BORE
X
STROKE
TYPE
MOUNTING
OPTIONS EM - INCH THREADS & PORT OPTIONS
25mm, 50mm, 75mm, 100mm BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD (See page 129 for restrictions on minimum double rod lengths.) MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH MOUNT
126
"B" PORTS (2 PLACES)
RM - ROD MALE THREADS RF, RT, RN, RY, RV, RH - ROD EXTENSIONS (SEE PAGE 129)
L30 76mm Bore Front Mount Cylinder "MF" MODEL TYPE L30
STANDARD STROKES
_,D
"A"
25mm, 50mm, 75mm, 100mm
"A" + STROKE
17,0(.669")
114,3(4.500") SQ. 14,2(.557")
PISTON AREA PUSH 45,60 cm2 (7.07 in2 ) PULL 29,70 cm2 (4.60 in2 )
78,0(3.07")
86,0(3.386")
"B" "C" "D"
Standard Threads G3/8 M33X3.5 M14X2
TYPE D 17,0(.669") + STK.
"EM" Option #6 SAE 1 1/4-12 5/8-18
(See page 129 for restrictions on minimum double rod lengths.)
W 14,2(.557")
Rear Mount Cylinder "MR"
86,0(3.386") Z
X 20,0(.787") (TYP) Y
45,0(Ø1.772") ROD "C" TAP
Mount Both End Cylinder "MB"
29,5(1.161") (TYP)
"D" TAP X 29,0(1.14") DP. (4 PLACES)
"B" PORTS (2 PLACES)
Thru Mount Cylinder "MT" MODEL TYPE L30
_,D
STANDARD STROKES 25mm, 50mm, 75mm, 100mm
"A"
PISTON AREA PUSH 45,60 cm2 (7.07 in2 ) PULL 29,70 cm2 (4.60 in2 )
78,0(3.07")
17,0(.669")
114,3(4.500") SQ.
14,2(.557") (TYP)
86,0(3.386") (TYP)
"A" + STROKE
86,0(3.386") (TYP)
14,2(.557") (TYP)
"B" "C"
Standard Threads "EM" Option G3/8 #6 SAE M33X3.5 1 1/4-12
TYPE D 17,0(.669") + STK.
(See page 129 for restrictions on minimum double rod lengths.)
W
Z
X 20,0(.787") (TYP) Y
45,0(Ø1.772") ROD "C" TAP
L30 MODEL
-
76 BORE
29,5(1.161") (TYP) 16,0(Ø.63") DRILL THRU (4 PLACES) 23,0(Ø.91") C'BORE X 15,2(.60") DP. (8 PLACES, 4 PER END)
X
"B" PORTS (2 PLACES)
STROKE
TYPE
MOUNTING
OPTIONS EM - INCH THREADS & PORT OPTIONS
25mm, 50mm, 75mm, 100mm BLANK - NO CODE, DOUBLE ACTING, SINGLE ROD D - DOUBLE ACTING, DOUBLE ROD (See page 129 for restrictions on minimum double rod lengths.)
RM - ROD MALE THREADS RF, RT, RN, RY, RV, RH - ROD EXTENSIONS (SEE PAGE 129)
MT - THRU MOUNT MF - FRONT MOUNT MR - REAR MOUNT MB - BOTH MOUNT
127
Rod End Options
Male Thread Option - "RM" Bore 25 32 40 50 63 76
"B" 18 (.71")
"A" M10X1.25
"B" 16 (.63")
"EM" Option 1/2-20
M12X1.25
18 (.71")
9/16-18
25 (.98")
M16X1.5
22 (.87")
3/4-16
30 (1.18")
M20X1.5
28 (1.10")
7/8-14
35 (1.38")
M27X2
36 (1.42")
1 1/4-12
45 (1.77")
M33X2
45 (1.77")
1 1/2-12
56 (2.20")
"B"
Dimensions above are the same for double rod cylinders.
"A" MALE THREAD (ALSO AVAILABLE WITH "EM" OPTION)
Rod End Detail See Chart Below Bore 25 32 40 50 63 76
Ø"A" 13 (.51")
"B" 6 (.24")
"C" 12 (.47")
17 (.67")
8 (.31")
15 (.59")
21 (.83")
8 (.31")
19 (.75")
27 (1.06")
9 (.35")
24 (.94")
35 (1.38")
11 (.43")
32 (1.26")
43 (1.69")
13 (.51")
39 (1.54")
STD. EXTENSION
"B"
Dimensions above are the same for double rod cylinders.
Ø"A"
"C" WRENCH FLATS
128
Rod Extensions Rod Extensions Option - See Chart Below Extensions Length
"RF"
"RT"
"RN"
"RY"
"RV"
5 (.20")
10 (.39")
15 (.59")
20 (.79")
25 (.98")
"RH" 35 (1.38")
For standard extension, see catalog pages. If cylinder is double ended, extension will be on both ends. Consult factory for single ended extension on a double ended cylinder.
STD. EX.
"EXTENSION"
STD. EX. + STROKE "EXTENSION"
TYPE "D" CYLINDER
Minimum Rod Extension for Double Rod Option (Type "D") - See Chart Below Standard double rod cylinders must have "X" dimensions greater than or equal to those listed in the table below. Corresponding rod extensions will be added to cylinders which do not meet this minimum length, so that standard extension plus stroke adds up to "X" MIN. This applies only to rear rod. Bore 25 32 40 50 63 76
STD. Ex. 8 (.31") 10 (.39") 10 (.39") 11 (.43") 13 (.51") 17 (.67")
"X" MIN 23 (.91") 25 (.98") 30 (1.18") 31 (1.22") 38 (1.50") 42 (1.65")
STD. EX.
TYPE "D" CYLINDER
For Strokes Less Than 15 (.59") 15 (.59") 20 (.79") 20 (.79") 25 (.98") 25 (.98")
*Single rod cylinders and cylinders with "RM" rod male thread option do not have this restriction. "X" MIN
129
ENGINEERED SOLUTIONS FOR YOUR APPLICATION... Stop working around everyone else’s standard cylinder. Your machine is unique
Custom Products
so why not have Nason design a unique custom cylinder for your specific application. Just show us what you want and we can provide a prototype for your approval. On the following pages are some examples of solutions we have provided other customers. Each one was unique in its design parameters. Some are made from specific materials or have unique coatings for harsh or clean room environments, some are made for high output in a small package, and some are just plain unusual. Talk to Nason about your next design need and you will be pleasantly surprised.
Nason Custom Products
SPECIALTY SLIDES
“All stainless steel” slide designed for heavy wash down application in the food packaging industry.
Powerful “1500 PSI hydraulic” slide in a compact package.
A low cost simple slide.
A heavy duty load carrying cylinder, made from plastic, for a highly corrosive environment.
Need a direct replacement
of a competitor’s product? Nason can help.
SPECIAL MATERIALS AND COATINGS
Food Grade
Plastic cylinders up to 2 1⁄2” bore. Great for wash down environments.
CUSTOM PROJECTS Z Compliance
Special compliance devices that will meet your special
needs are available. When
you can’t find what you need in the marketplace just give us a call.
All Steel
Great for heavy duty
applications. 3000 psi
hydraulic cylinders available in up to 3” bores.
Locking Cylinders
Custom mechanical locking
cylinders designed for a true locking application.
Multi-bore Cylinders Multiple cylinders in a
common housing. This
allows for multiple cylinders Hard Coat Anodized with Teflon
to fit in tight spaces and hold tight tolerances.
For those applications that
require extremely low friction at very high speeds.
Valve Manifold Cylinder With the valve mounting directly to the cylinder,
response times are very quick. Hard Coat Anodizing
We can hard coat anodize any aluminum cylinder
manufactured by Nason
to help prevent corrosion.
Adjustable Stroke
Dial in your stroke with our adjustable extend stroke cylinder.
All Stainless Steel
We can manufacture most of our product line out of 303 stainless steel.
Air to Oil booster
From 4:1 intensification
up to 50:1 and hydraulic outputs up to 5000 PSI.
Also Available Our new, expanded Nason switch catalog. At Nason, we are fanatical about responding to our customer’s exact requests. It’s what sets us apart from the competition. So for most design engineers, our catalog is not just our product listing... it’s our starting point. When it comes to switches, Nason has the industry’s widest range of options including set points, fluid and electrical connections, switch circuitry, current ratings, severe duty service and more. And our manufacturing strategy means we are able to deliver you switches quickly, economically even with prototype assignments. So, when it comes to making switches that meet your exact needs, we deliver. At Nason, we don’t think of that as custom work...we think of it as customer service. That’s what Nason’s New Thinking is all about.
1307 S Highway 11 • Walhalla SC 29691 800.229.4955 • Phone: 864.638.9521 Fax: 864.638.7903 • Orders: 800.229.4955 www.nasonptc.com WARRANTY: It is the sole responsibility of the user to determine the suitability of any product or information supplied by Nason for any application or use by the user. THE FOLLOWING IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. The Nason Company warrants each product to be free from defects in material and workmanship under normal use and service. Nason’s obligation under this warranty is limited to repairing of or supplying, at our option, a part or parts to replace any defective part(s) within one (1) year from the date of original sale. Wear components including but not limited to seals, wear bands, and bearings are excluded from this warranty. No product will be returned without prior authorized approval. If authorized, the transportation charges are to be prepaid to The Nason Company, Walhalla, SC. Unauthorized returns will be returned freight collect. The provisions of this warranty will not apply to any part(s) which have been subject to misuse, negligence, or accident, or which have been repaired or altered outside of The Nason Company service department in any way so as in the judgement of Nason to adversely affect its performance, stability, or reliability. The Nason Company neither assumes nor authorizes anyone to assume for it any other obligation or liability for any loss or damage either direct, incidental or consequential resulting from or arising out of or in connection with any of its defective part(s). Nason will not be responsible for any labor or other charges in connection with the removal of a product deemed to be defective or for installation or replacement of a defective or repaired product. Buyer’s sole remedies are as provided herein. In no event shall Nason be liable for any cost of Buyer’s cover, or for any indirect, special, consequential, incidental, or punitive damages of any sort, whether based on tort or breach of contract and/or warranty.
NAS-CYL 2/16
Request Nason’s catalog of custom engineered switches by calling toll free 800-229-4955 or visit our website at www.nasonptc.com
NASON Automation Products
SPINE
135
