AH-64 Apache Helicoptor R&D Team
PENETRATING LUBRICANT Only non-flammable Nano penetrating oil on the market. • Protects against corrosion and rust at the Nano level. • Prolongs equipment life far better than traditional lubricants. • Reduces friction to extraordinarily low levels to reduce wear and improve efficiency. • Penetrates deeply to break friction welds. • Lubricates to reduce maintenance time and extends repair cycles. • Resistant to moisture and chemicals. • Cuts through grease. • Quickly penetrates corrosion. • Foaming action for 100% coverage. • Excellent penetration and creep properties. Works great on locks, rusted nuts, bolts, and sliding mechanisms. Perfect for use on Aviation, Auto, Industrial, Marine and Other Mechanical Equipment.
18
Conor Daly Nano Racing Team Indycar Series
NANO ProMT Penetrating Lubricant is an innovative formula with universal capabilities. Developed to lubricate deeply into the spaces between rusted, metal-to-metal parts. It speeds maintenance activities and provides a barrier to future corrosion and rust. Foaming action and excellent creep properties allow the nano particles to achieve 100% coverage for fast removal of friction welded components.
DESCRIPTION
NANO PENETRATING LUBRICANT
PART#
NDT11P
UPC CODE
8 53770 00408 8
SCC CODE
1 08 53770 00408 5
HARMONIC CODE
2710.19.30
PACKAGE CONTENTS
11 oz
SELLING UNIT WEIGHT
0.85 pounds
SELLING UNIT DIMENSION
2.6” x 2.6” x 7.9”
SELLING UNIT CUBE
0.030 cubic feet
CASE PACK
12
CASE WEIGHT
12 pounds
CASE DIMENSION
10.9” x 8.4” x 8.8”
CASE CUBE
0.46 cubic feet
CASES PER PALLET
108
CASES/LAYER
18
LAYERS/PALLET
6
WEIGHT/PALLET
1,134 + 40 (total weight 1,174 lbs)
NANO ProMT • 7427 Matthews Mint Hill Rd • Ste 201 Mint Hill • NC 28227 • www.nanopromt.com • Made in USA ©2016 NanoProMT™
08-2016
SAFETY DATA SHEET
1. Identification Product identifier
Nano All-In-One Universal Penetrating Lubricant
Other means of identification SDS number
NDT11P
Part No.
NDT11P
Tariff code
3403.19.5000
Recommended use
Lubricant
Recommended restrictions
None known.
Manufacturer/Importer/Supplier/Distributor information Manufacturer Company name Address Telephone E-mail Contact person Emergency phone number
Nano ProMT LLC 7427 Matthews Mint Hill Road, Suite 201 Mint Hill, NC 28227 Not available. Not available. Chris Hunter Not available.
2. Hazard(s) identification Physical hazards
Flammable aerosols
Classification not possible
Health hazards
Skin corrosion/irritation
Category 2
Serious eye damage/eye irritation
Category 2A
Hazardous to the aquatic environment, acute hazard
Category 2
Hazardous to the aquatic environment, long-term hazard
Category 2
Environmental hazards
OSHA defined hazards
Not classified.
Label elements
Signal word
Warning
Hazard statement
Toxic to aquatic life. Toxic to aquatic life with long lasting effects. Causes serious eye irritation. Causes skin irritation.
Precautionary statement Prevention
Avoid release to the environment. Wear protective gloves. Wash thoroughly after handling. Wear eye protection/face protection.
Response
Collect spillage. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. If on skin: Wash with plenty of water. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Storage
Not available.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazard(s) not otherwise classified (HNOC)
None known.
Supplemental information
56.08% of the mixture consists of component(s) of unknown acute hazards to the aquatic environment. 56.08% of the mixture consists of component(s) of unknown long-term hazards to the aquatic environment.
Material name: Nano All-In-One Universal Penetrating Lubricant NDT11P Version #: 01 Issue date: 08-09-2016
SDS US
1/9
3. Composition/information on ingredients Mixtures Chemical name
CAS number
%
Dioctyl Adipate
Common name and synonyms
103-23-1
25.22
Carbon Dioxide
124-38-9
2.22
Bht (butylated Hydroxytoluene)
128-37-0
1.96
141808-04-0
1.66
471-34-1
56000 mg/l, 96 hours
Dioctyl Adipate (CAS 103-23-1) Aquatic Fish
LC50
Bluegill (Lepomis macrochirus)
0.48 - 0.85 mg/l, 96 hours
* Estimates for product may be based on additional component data not shown. Not available.
Persistence and degradability Bioaccumulative potential
Not available.
Mobility in soil
Not available.
Other adverse effects
Not available.
Material name: Nano All-In-One Universal Penetrating Lubricant NDT11P Version #: 01 Issue date: 08-09-2016
SDS US
6/9
13. Disposal considerations Disposal instructions
Local disposal regulations Hazardous waste code Waste from residues / unused products Contaminated packaging
Do not allow this material to drain into sewers/water supplies. Dispose of contents/container in accordance with local/regional/national/international regulations. Do not contaminate ponds, waterways or ditches with chemical or used container. Contents under pressure. Do not puncture, incinerate or crush. Dispose in accordance with all applicable regulations. Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Dispose in accordance with all applicable regulations. The waste code should be assigned in discussion between the user, the producer and the waste disposal company. Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions). Do not re-use empty containers. Empty containers should be taken to an approved waste handling site for recycling or disposal. Since emptied containers may retain product residue, follow label warnings even after container is emptied.
14. Transport information DOT UN number UN proper shipping name Transport hazard class(es) Class Subsidiary risk Packing group Special precautions for user IATA UN number UN proper shipping name Transport hazard class(es) Class Subsidiary risk Packing group Environmental hazards Special precautions for user IMDG UN number UN proper shipping name Transport hazard class(es) Class Subsidiary risk Packing group Environmental hazards Marine pollutant EmS Special precautions for user Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not available. Consumer Commodity ORM-D Not applicable. Read safety instructions, SDS and emergency procedures before handling. UN1950 Aerosol, non-flammable 2.2 Not applicable. Yes Read safety instructions, SDS and emergency procedures before handling. UN1950 Aerosols, MARINE POLLUTANT 2.2 Not applicable. Yes F-D, S-U Read safety instructions, SDS and emergency procedures before handling. Not available.
Marine pollutant
Material name: Nano All-In-One Universal Penetrating Lubricant NDT11P Version #: 01 Issue date: 08-09-2016
SDS US
7/9
15. Regulatory information US federal regulations
This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D) Not regulated. CERCLA Hazardous Substance List (40 CFR 302.4) Not listed. SARA 304 Emergency release notification Not regulated. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050) Not regulated. Superfund Amendments and Reauthorization Act of 1986 (SARA) Immediate Hazard - Yes Hazard categories Delayed Hazard - No Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No SARA 302 Extremely hazardous substance Not listed. SARA 311/312 Hazardous chemical
No
SARA 313 (TRI reporting) Not regulated. Other federal regulations Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List Not regulated. Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130) Not regulated. Not regulated. Safe Drinking Water Act (SDWA) US state regulations US. California Controlled Substances. CA Department of Justice (California Health and Safety Code Section 11100) Not listed. US. California. Candidate Chemicals List. Safer Consumer Products Regulations (Cal. Code Regs, tit. 22, 69502.3, subd. (a)) Dioctyl Adipate (CAS 103-23-1) Paraffin Oils (petroleum), Catalytic Dewaxed Heavy (CAS 64742-70-7) US. Massachusetts RTK - Substance List Bht (butylated Hydroxytoluene) (CAS 128-37-0) Calcium Carbonate (CAS 471-34-1) Carbon Dioxide (CAS 124-38-9) Dioctyl Adipate (CAS 103-23-1) Paraffin Oils (petroleum), Catalytic Dewaxed Heavy (CAS 64742-70-7) US. New Jersey Worker and Community Right-to-Know Act Bht (butylated Hydroxytoluene) (CAS 128-37-0) Calcium Carbonate (CAS 471-34-1) Carbon Dioxide (CAS 124-38-9) Dioctyl Adipate (CAS 103-23-1) US. Pennsylvania Worker and Community Right-to-Know Law Bht (butylated Hydroxytoluene) (CAS 128-37-0) Calcium Carbonate (CAS 471-34-1) Carbon Dioxide (CAS 124-38-9) Dioctyl Adipate (CAS 103-23-1) Paraffin Oils (petroleum), Catalytic Dewaxed Heavy (CAS 64742-70-7) US. Rhode Island RTK Not regulated.
Material name: Nano All-In-One Universal Penetrating Lubricant NDT11P Version #: 01 Issue date: 08-09-2016
SDS US
8/9
US. California Proposition 65 California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to contain any chemicals currently listed as carcinogens or reproductive toxins. International Inventories Country(s) or region Australia
Inventory name Australian Inventory of Chemical Substances (AICS)
On inventory (yes/no)* No
Canada
Domestic Substances List (DSL)
Canada
Non-Domestic Substances List (NDSL)
No
China
Inventory of Existing Chemical Substances in China (IECSC)
No
Europe
European Inventory of Existing Commercial Chemical Substances (EINECS)
No
Europe
European List of Notified Chemical Substances (ELINCS)
No
Japan
Inventory of Existing and New Chemical Substances (ENCS)
No
Korea
Existing Chemicals List (ECL)
No
New Zealand
New Zealand Inventory
No
Philippines
Philippine Inventory of Chemicals and Chemical Substances (PICCS)
No
United States & Puerto Rico
Toxic Substances Control Act (TSCA) Inventory
Yes
Yes
*A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s) A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing country(s).
16. Other information, including date of preparation or last revision Issue date
08-09-2016
Version #
01 Health: 2 Flammability: 0 Physical hazard: 0 Health: 2 Flammability: 0 Instability: 0
HMIS® ratings
NFPA ratings
NFPA ratings
0 2
Disclaimer
0
Nano ProMT LLC cannot anticipate all conditions under which this information and its product, or the products of other manufacturers in combination with its product, may be used. It is the user’s responsibility to ensure safe conditions for handling, storage and disposal of the product, and to assume liability for loss, injury, damage or expense due to improper use. The information in the sheet was written based on the best knowledge and experience currently available.
Material name: Nano All-In-One Universal Penetrating Lubricant NDT11P Version #: 01 Issue date: 08-09-2016
SDS US
9/9
AH-64 Apache Helicoptor R&D Team
DRY LUBRICANT • Prolongs equipment life far better than traditional lubricants. • No oily residue. Nonstick. • Moisture-displacing film leaves white powder. • Dries fast to prevent the collection of dirt and dust. • Ozone friendly - CFC and Tricholethane free. • Perfect for polymers and ceramics. • Protects against corrosion and rust at the Nano level. • Reduces friction to extraordinarily low levels to reduce wear and improve efficiency. • Penetrates deeply to break friction welds. • Lubricates to reduce maintenance time and extends repair cycles. Works great on Garage Doors, RV Slide-outs, Hinges, Gears, Chains, Ignition, Motors, Firearms, Reciprocating Sliding Mechanisms and Window Tracks. Perfect for use on Aviation, Auto, Industrial, Marine and Other Mechanical Equipment.
18
Conor Daly Nano Racing Team Indycar Series
NANO ProMT Dry Lubricant is a highly engineered mixture of Dry Lube with CERFLON and NANO materials suspended in lubricating oil. It stays put, without squeezing out like liquid lubricants, making NDT11D ideal for reciprocating motions applications such as gear and chain lubrication. Superior nano materials lubricate to reduce friction and wear, preventing fretting and galling even in extreme pressure and high temperature applications. The CFC and 1,1,1-Trichloroethane free aerosol dries fast and clean, with no oily residue, providing instant, long lasting protection.
DESCRIPTION
DRY LUBRICANT
PART#
NDT11D
UPC CODE
8 53770 00407 1
SCC CODE
1 08 53770 00407 8
HARMONIC CODE
2710.19.30
PACKAGE CONTENTS
11 oz
SELLING UNIT WEIGHT
0.96 pounds
SELLING UNIT DIMENSION
2.6” x 2.6” x 7.9”
SELLING UNIT CUBE
.030 cubic feet
CASE PACK
12
CASE WEIGHT
12 pounds
CASE DIMENSION
10.9” x 8.4” x 8.8”
CASE CUBE
0.46 cubic feet
CASES PER PALLET
108
CASES/LAYER
18
LAYERS/PALLET
6
WEIGHT/PALLET
1,296 / 40 (total weight 1,336 lbs.) NANO ProMT • 7427 Matthews Mint Hill Rd • Ste 201 Mint Hill • NC 28227 • www.nanopromt.com • Made in USA ©2016 NanoProMT™
08-2016
AH-64 Apache Helicoptor R&D Team
DRY LUBRICANT • Prolongs equipment life far better than traditional lubricants. • No oily residue. Nonstick. • Moisture-displacing film leaves white powder. • Dries fast to prevent the collection of dirt and dust. • Ozone friendly - CFC and Tricholethane free. • Perfect for polymers and ceramics. • Protects against corrosion and rust at the Nano level. • Reduces friction to extraordinarily low levels to reduce wear and improve efficiency. • Penetrates deeply to break friction welds. • Lubricates to reduce maintenance time and extends repair cycles. Works great on Garage Doors, RV Slide-outs, Hinges, Gears, Chains, Ignition, Motors, Firearms, Reciprocating Sliding Mechanisms and Window Tracks. Perfect for use on Aviation, Auto, Industrial, Marine and Other Mechanical Equipment.
18
Conor Daly Nano Racing Team Indycar Series
NANO ProMT Dry Lubricant is a highly engineered mixture of Dry Lube with CERFLON and NANO materials suspended in lubricating oil. It stays put, without squeezing out like liquid lubricants, making NDT11D ideal for reciprocating motions applications such as gear and chain lubrication. Superior nano materials lubricate to reduce friction and wear, preventing fretting and galling even in extreme pressure and high temperature applications. The CFC and 1,1,1-Trichloroethane free aerosol dries fast and clean, with no oily residue, providing instant, long lasting protection.
DESCRIPTION
DRY LUBRICANT (CA ONLY)
PART#
NDT11DCA
UPC CODE
8 53770 00430 9
SCC CODE
1 08 53770 00430 6
HARMONIC CODE
2710.19.30
PACKAGE CONTENTS
11 oz
SELLING UNIT WEIGHT
0.96 pounds
SELLING UNIT DIMENSION
2.6” x 2.6” x 7.9”
SELLING UNIT CUBE
.030 cubic feet
CASE PACK
12
CASE WEIGHT
12 pounds
CASE DIMENSION
10.9” x 8.4” x 8.8”
CASE CUBE
0.46 cubic feet
CASES PER PALLET
108
CASES/LAYER
18
LAYERS/PALLET
6
WEIGHT/PALLET
1,296 / 40 (total weight 1,336 lbs.) NANO ProMT • 7427 Matthews Mint Hill Rd • Ste 201 Mint Hill • NC 28227 • www.nanopromt.com • Made in USA ©2016 NanoProMT™
08-2016
SAFETY DATA SHEET
1. Identification Product identifier
Nano Dry Lubricant
Other means of identification SDS number
NDT11D
Part No.
NDT11D
Tariff code
2905.120050
Recommended use
Lubricant
Recommended restrictions
None known.
Manufacturer/Importer/Supplier/Distributor information Manufacturer Company name Address Telephone E-mail Contact person Emergency phone number
Nano ProMT LLC 7427 Matthews Mint Hill Road, Suite 201 Mint Hill, NC 28227 Not available. Not available. Chris Hunter Not available.
2. Hazard(s) identification Physical hazards
Flammable aerosols
Category 1
Health hazards
Skin corrosion/irritation
Category 2
Serious eye damage/eye irritation
Category 2A
Specific target organ toxicity, single exposure Category 3 narcotic effects Environmental hazards
OSHA defined hazards
Aspiration hazard
Category 1
Hazardous to the aquatic environment, acute hazard
Category 2
Hazardous to the aquatic environment, long-term hazard
Category 2
Not classified.
Label elements
Signal word
Danger
Hazard statement
Extremely flammable aerosol. May be fatal if swallowed and enters airways. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. Toxic to aquatic life. Toxic to aquatic life with long lasting effects.
Precautionary statement Prevention
Response
Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not spray on an open flame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Avoid breathing mist or vapor. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Wear eye protection/face protection. Wear protective gloves. If swallowed: Immediately call a poison center/doctor. Do NOT induce vomiting. If on skin: Wash with plenty of water. If inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a poison center/doctor if you feel unwell. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash before reuse. Collect spillage.
Material name: Nano Dry Lubricant NDT11D Version #: 03 Revision date: 06-30-2016
SDS US
Issue date: 04-16-2015
1 / 10
Storage
Store in a well-ventilated place. Keep container tightly closed. Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazard(s) not otherwise classified (HNOC)
Static accumulating flammable liquid can become electrostatically charged even in bonded and grounded equipment. Sparks may ignite liquid and vapor. May cause flash fire or explosion.
Supplemental information
77.31% of the mixture consists of component(s) of unknown acute hazards to the aquatic environment. 77.31% of the mixture consists of component(s) of unknown long-term hazards to the aquatic environment.
3. Composition/information on ingredients Mixtures Chemical name
Common name and synonyms
CAS number
%
Isopropyl Alcohol
67-63-0
44
Heptane
142-82-5
20
Other components below reportable levels *Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret.
36
4. First-aid measures Inhalation Skin contact Eye contact Ingestion Most important symptoms/effects, acute and delayed
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell. Remove contaminated clothing. Wash with plenty of soap and water. If skin irritation occurs: Get medical advice/attention. Wash contaminated clothing before reuse. Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists. Call a physician or poison control center immediately. Rinse mouth. Do not induce vomiting. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. Aspiration may cause pulmonary edema and pneumonitis. May cause drowsiness and dizziness. Headache. Nausea, vomiting. Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Skin irritation. May cause redness and pain.
Indication of immediate medical attention and special treatment needed
Provide general supportive measures and treat symptomatically. Keep victim under observation. Symptoms may be delayed.
General information
Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves.
5. Fire-fighting measures Suitable extinguishing media Unsuitable extinguishing media Specific hazards arising from the chemical
Special protective equipment and precautions for firefighters Fire fighting equipment/instructions Specific methods
General fire hazards
Water fog. Alcohol resistant foam. Carbon dioxide (CO2). Dry chemical powder, carbon dioxide, sand or earth may be used for small fires only. Do not use water jet as an extinguisher, as this will spread the fire. Contents under pressure. Pressurized container may explode when exposed to heat or flame. This product is a poor conductor of electricity and can become electrostatically charged. If sufficient charge is accumulated, ignition of flammable mixtures can occur. To reduce potential for static discharge, use proper bonding and grounding procedures. This liquid may accumulate static electricity when filling properly grounded containers. Static electricity accumulation may be significantly increased by the presence of small quantities of water or other contaminants. Material will float and may ignite on surface of water. During fire, gases hazardous to health may be formed. Firefighters must use standard protective equipment including flame retardant coat, helmet with face shield, gloves, rubber boots, and in enclosed spaces, SCBA. Move containers from fire area if you can do so without risk. Containers should be cooled with water to prevent vapor pressure build up. For massive fire in cargo area, use unmanned hose holder or monitor nozzles, if possible. If not, withdraw and let fire burn out. Use standard firefighting procedures and consider the hazards of other involved materials. Move containers from fire area if you can do so without risk. In the event of fire and/or explosion do not breathe fumes. Extremely flammable aerosol.
Material name: Nano Dry Lubricant NDT11D Version #: 03 Revision date: 06-30-2016
SDS US
Issue date: 04-16-2015
2 / 10
6. Accidental release measures Personal precautions, protective equipment and emergency procedures
Methods and materials for containment and cleaning up
Environmental precautions
Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Remove all possible sources of ignition in the surrounding area. Wear appropriate protective equipment and clothing during clean-up. Avoid breathing mist or vapor. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ventilate closed spaces before entering them. Use appropriate containment to avoid environmental contamination. Transfer by mechanical means such as vacuum truck to a salvage tank or other suitable container for recovery or safe disposal. Local authorities should be advised if significant spillages cannot be contained. For personal protection, see section 8 of the SDS. Refer to attached safety data sheets and/or instructions for use. Stop leak if you can do so without risk. Move the cylinder to a safe and open area if the leak is irreparable. Keep combustibles (wood, paper, oil, etc.) away from spilled material. Prevent product from entering drains. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water. Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination. For waste disposal, see section 13 of the SDS. Avoid release to the environment. Inform appropriate managerial or supervisory personnel of all environmental releases. Prevent further leakage or spillage if safe to do so. Avoid discharge into drains, water courses or onto the ground. Use appropriate containment to avoid environmental contamination.
7. Handling and storage Precautions for safe handling
Minimize fire risks from flammable and combustible materials (including combustible dust and static accumulating liquids) or dangerous reactions with incompatible materials. Handling operations that can promote accumulation of static charges include but are not limited to: mixing, filtering, pumping at high flow rates, splash filling, creating mists or sprays, tank and container filling, tank cleaning, sampling, gauging, switch loading, vacuum truck operations. Pressurized container: Do not pierce or burn, even after use. Do not use if spray button is missing or defective. Do not spray on a naked flame or any other incandescent material. Do not smoke while using or until sprayed surface is thoroughly dry. Do not cut, weld, solder, drill, grind, or expose containers to heat, flame, sparks, or other sources of ignition. All equipment used when handling the product must be grounded. Do not re-use empty containers. Avoid breathing mist or vapor. Avoid contact with eyes, skin, and clothing. Avoid prolonged exposure. Use only in well-ventilated areas. Wear appropriate personal protective equipment. Wash hands thoroughly after handling. Avoid release to the environment. Observe good industrial hygiene practices. For additional information on equipment bonding and grounding, refer to the Canadian Electrical Code in Canada, (CSA C22.1), or the American Petroleum Institute (API) Recommended Practice 2003, "Protection Against Ignitions Arising out of Static, Lightning, and Stray Currents" or National Fire Protection Association (NFPA) 77, "Recommended Practice on Static Electricity" or National Fire Protection Association (NFPA) 70, "National Electrical Code".
Conditions for safe storage, including any incompatibilities
Level 2 Aerosol. Store locked up. Pressurized container. Protect from sunlight and do not expose to temperatures exceeding 50°C/122 °F. Do not puncture, incinerate or crush. Do not handle or store near an open flame, heat or other sources of ignition. This material can accumulate static charge which may cause spark and become an ignition source. Avoid spark promoters. Ground/bond container and equipment. These alone may be insufficient to remove static electricity. Keep out of the reach of children. Store away from incompatible materials (see Section 10 of the SDS).
8. Exposure controls/personal protection Occupational exposure limits US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) Components Type Heptane (CAS 142-82-5)
PEL
Isopropyl Alcohol (CAS 67-63-0)
PEL
Value 2000 mg/m3 500 ppm 980 mg/m3 400 ppm
US. ACGIH Threshold Limit Values Components
Type
Value
Heptane (CAS 142-82-5)
STEL
500 ppm
Material name: Nano Dry Lubricant NDT11D Version #: 03 Revision date: 06-30-2016
SDS US
Issue date: 04-16-2015
3 / 10
US. ACGIH Threshold Limit Values Components Isopropyl Alcohol (CAS 67-63-0)
Type
Value
TWA STEL
400 ppm 400 ppm
TWA
200 ppm
US. NIOSH: Pocket Guide to Chemical Hazards Components Type Heptane (CAS 142-82-5)
Value
Ceiling
1800 mg/m3 440 ppm 350 mg/m3 85 ppm 1225 mg/m3
TWA Isopropyl Alcohol (CAS 67-63-0)
STEL
500 ppm 980 mg/m3 400 ppm
TWA Biological limit values ACGIH Biological Exposure Indices Components Value
Determinant
Specimen
Sampling Time
Isopropyl Alcohol (CAS 40 mg/l Acetone Urine * 67-63-0) * - For sampling details, please see the source document. Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates Appropriate engineering should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, controls or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level. Eye wash facilities and emergency shower must be available when handling this product. Individual protection measures, such as personal protective equipment Wear safety glasses with side shields, goggles or full facepiece. Eye/face protection Skin protection Hand protection Other
Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove supplier. Wear appropriate chemical resistant clothing.
Respiratory protection
Chemical respirator with organic vapor cartridge and full facepiece. Chemical respirator with organic vapor cartridge and full facepiece if threshold limits are exceeded.
Thermal hazards
Wear appropriate thermal protective clothing, when necessary.
General hygiene considerations
When using do not smoke. Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants.
9. Physical and chemical properties Appearance
Opaque
Physical state
Liquid.
Form
Aerosol.
Color
Dark grey
Odor
Hydrocarbon like
Odor threshold
Not available.
pH
Not available.
Melting point/freezing point
-131.08 °F (-90.6 °C) estimated
Initial boiling point and boiling range
180.5 °F (82.5 °C) estimated
Flash point
24.8 °F (-4.0 °C) Tag Closed Cup
Evaporation rate
Not available.
Flammability (solid, gas)
Not applicable.
Material name: Nano Dry Lubricant NDT11D Version #: 03 Revision date: 06-30-2016
SDS US
Issue date: 04-16-2015
4 / 10
Upper/lower flammability or explosive limits 2.5 % estimated Flammability limit - lower (%) Flammability limit - upper (%)
12 % estimated
Explosive limit - lower (%)
Not available.
Explosive limit - upper (%)
Not available.
Vapor pressure
60.78 hPa estimated
Vapor density
Not available.
Relative density
Not available.
Solubility(ies) Solubility (water)
Not available.
Partition coefficient (n-octanol/water)
Not available.
Auto-ignition temperature
750.2 °F (399 °C) estimated
Decomposition temperature
Not available.
Viscosity
Not available.
Other information Density
6.32 lbs/gal estimated
Explosive properties
Not explosive.
Flame extension
> 17 in
Flammability (flash back)
No
Flammability class
Flammable IB estimated
Heat of combustion (NFPA 30B)
20.26 kJ/g estimated
Oxidizing properties
Not oxidizing.
Percent volatile
44 % estimated
Specific gravity
0.76 estimated
VOC
> 96 % estimated
10. Stability and reactivity Reactivity
The product is stable and non-reactive under normal conditions of use, storage and transport.
Chemical stability
Material is stable under normal conditions.
Possibility of hazardous reactions
No dangerous reaction known under conditions of normal use.
Conditions to avoid
Avoid temperatures exceeding the flash point. Contact with incompatible materials.
Incompatible materials
Acids. Strong oxidizing agents. Isocyanates. Chlorine.
Hazardous decomposition products
No hazardous decomposition products are known.
11. Toxicological information Information on likely routes of exposure May cause drowsiness and dizziness. Headache. Nausea, vomiting. Prolonged inhalation may be Inhalation harmful. Skin contact
Causes skin irritation.
Eye contact
Causes serious eye irritation.
Ingestion
Droplets of the product aspirated into the lungs through ingestion or vomiting may cause a serious chemical pneumonia.
Symptoms related to the physical, chemical and toxicological characteristics
Aspiration may cause pulmonary edema and pneumonitis. May cause drowsiness and dizziness. Headache. Nausea, vomiting. Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Skin irritation. May cause redness and pain.
Information on toxicological effects Material name: Nano Dry Lubricant NDT11D Version #: 03 Revision date: 06-30-2016
SDS US
Issue date: 04-16-2015
5 / 10
May be fatal if swallowed and enters airways. Narcotic effects.
Acute toxicity Components
Species
Test Results
Inhalation LC50
Rat
103 mg/l, 4 Hours
LD50
Mouse
75 mg/l, 2 Hours
Dermal LD50
Rabbit
12800 mg/kg
Oral LD50
Dog
4797 mg/kg
Mouse
3600 mg/kg
Rabbit
5.03 g/kg
Rat
4.7 g/kg
Heptane (CAS 142-82-5) Acute
Isopropyl Alcohol (CAS 67-63-0) Acute
* Estimates for product may be based on additional component data not shown. Causes skin irritation.
Skin corrosion/irritation
Causes serious eye irritation.
Serious eye damage/eye irritation
Respiratory or skin sensitization Not a respiratory sensitizer. Respiratory sensitization This product is not expected to cause skin sensitization.
Skin sensitization
No data available to indicate product or any components present at greater than 0.1% are mutagenic or genotoxic.
Germ cell mutagenicity
This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA.
Carcinogenicity
IARC Monographs. Overall Evaluation of Carcinogenicity Not listed. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050) Not regulated. US. National Toxicology Program (NTP) Report on Carcinogens Not listed. This product is not expected to cause reproductive or developmental effects. Reproductive toxicity Specific target organ toxicity - single exposure
May cause drowsiness and dizziness.
Specific target organ toxicity - repeated exposure
Not classified.
Aspiration hazard
May be fatal if swallowed and enters airways.
Chronic effects
Prolonged inhalation may be harmful.
12. Ecological information Ecotoxicity
Toxic to aquatic life with long lasting effects.
Components
Species
Test Results
Mozambique tilapia (Tilapia mossambica)
375 mg/l, 96 hours
Heptane (CAS 142-82-5) Aquatic Fish
LC50
Material name: Nano Dry Lubricant NDT11D Version #: 03 Revision date: 06-30-2016
SDS US
Issue date: 04-16-2015
6 / 10
Components
Species
Test Results
Bluegill (Lepomis macrochirus)
> 1400 mg/l, 96 hours
Isopropyl Alcohol (CAS 67-63-0) Aquatic Fish
LC50
* Estimates for product may be based on additional component data not shown. No data is available on the degradability of this product. Persistence and degradability Bioaccumulative potential Partition coefficient n-octanol / water (log Kow) Heptane Isopropyl Alcohol No data available. Mobility in soil Other adverse effects
4.66 0.05
No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component.
13. Disposal considerations Disposal instructions
Local disposal regulations Hazardous waste code Waste from residues / unused products Contaminated packaging
Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Contents under pressure. Do not puncture, incinerate or crush. Do not allow this material to drain into sewers/water supplies. Do not contaminate ponds, waterways or ditches with chemical or used container. Dispose of contents/container in accordance with local/regional/national/international regulations. Dispose in accordance with all applicable regulations. The waste code should be assigned in discussion between the user, the producer and the waste disposal company. Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions). Since emptied containers may retain product residue, follow label warnings even after container is emptied. Empty containers should be taken to an approved waste handling site for recycling or disposal. Do not re-use empty containers.
14. Transport information DOT UN number UN proper shipping name Transport hazard class(es) Class Subsidiary risk Label(s) Packing group Special precautions for user Packaging exceptions Packaging non bulk Packaging bulk IATA UN number UN proper shipping name Transport hazard class(es) Class Subsidiary risk Packing group Environmental hazards ERG Code Special precautions for user Other information Passenger and cargo aircraft Cargo aircraft only IMDG UN number
Not available. Consumer commodity ORM-D None Not applicable. Read safety instructions, SDS and emergency procedures before handling. 156, 306 156, 306 None UN1950 Aerosol, Flammable 2.1 Not applicable. Yes 9L Read safety instructions, SDS and emergency procedures before handling. Allowed with restrictions. Allowed with restrictions. UN1950
Material name: Nano Dry Lubricant NDT11D Version #: 03 Revision date: 06-30-2016
SDS US
Issue date: 04-16-2015
7 / 10
UN proper shipping name Transport hazard class(es) Class Subsidiary risk Packing group Environmental hazards Marine pollutant EmS Special precautions for user Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Aerosols (Isopropyl Alcohol), MARINE POLLUTANT 2.1 Not applicable. Yes F-E, S̲-E̲ Read safety instructions, SDS and emergency procedures before handling. Not established.
IATA; IMDG
Marine pollutant
General information
IMDG Regulated Marine Pollutant.
15. Regulatory information US federal regulations
This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D) Not regulated. CERCLA Hazardous Substance List (40 CFR 302.4) Heptane (CAS 142-82-5) Listed. Isopropyl Alcohol (CAS 67-63-0) Listed. SARA 304 Emergency release notification Not regulated. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050) Not regulated. Superfund Amendments and Reauthorization Act of 1986 (SARA) Immediate Hazard - Yes Hazard categories Delayed Hazard - No Fire Hazard - Yes Pressure Hazard - No Reactivity Hazard - No SARA 302 Extremely hazardous substance Not listed. SARA 311/312 Hazardous chemical
No
Material name: Nano Dry Lubricant NDT11D Version #: 03 Revision date: 06-30-2016
SDS US
Issue date: 04-16-2015
8 / 10
SARA 313 (TRI reporting) Chemical name Isopropyl Alcohol
CAS number
% by wt.
67-63-0
44
Other federal regulations Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List Not regulated. Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130) Not regulated. Not regulated. Safe Drinking Water Act (SDWA) FEMA Priority Substances Respiratory Health and Safety in the Flavor Manufacturing Workplace Isopropyl Alcohol (CAS 67-63-0) Low priority US state regulations US. California Controlled Substances. CA Department of Justice (California Health and Safety Code Section 11100) Not listed. US. California. Candidate Chemicals List. Safer Consumer Products Regulations (Cal. Code Regs, tit. 22, 69502.3, subd. (a)) Isopropyl Alcohol (CAS 67-63-0) US. Massachusetts RTK - Substance List Heptane (CAS 142-82-5) Isopropyl Alcohol (CAS 67-63-0) US. New Jersey Worker and Community Right-to-Know Act Heptane (CAS 142-82-5) Isopropyl Alcohol (CAS 67-63-0) US. Pennsylvania Worker and Community Right-to-Know Law Heptane (CAS 142-82-5) Isopropyl Alcohol (CAS 67-63-0) US. Rhode Island RTK Isopropyl Alcohol (CAS 67-63-0) US. California Proposition 65 California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to contain any chemicals currently listed as carcinogens or reproductive toxins. International Inventories Country(s) or region Australia
Inventory name Australian Inventory of Chemical Substances (AICS)
On inventory (yes/no)* No
Canada
Domestic Substances List (DSL)
No
Canada
Non-Domestic Substances List (NDSL)
No
China
Inventory of Existing Chemical Substances in China (IECSC)
No
Europe
European Inventory of Existing Commercial Chemical Substances (EINECS)
No
Europe
European List of Notified Chemical Substances (ELINCS)
No
Japan
Inventory of Existing and New Chemical Substances (ENCS)
No
Korea
Existing Chemicals List (ECL)
No
New Zealand
New Zealand Inventory
No
Philippines
Philippine Inventory of Chemicals and Chemical Substances (PICCS)
No
United States & Puerto Rico
Toxic Substances Control Act (TSCA) Inventory
Yes
*A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s) A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing country(s).
16. Other information, including date of preparation or last revision Issue date
04-16-2015
Revision date
06-30-2016
Version #
03
Material name: Nano Dry Lubricant NDT11D Version #: 03 Revision date: 06-30-2016
SDS US
Issue date: 04-16-2015
9 / 10
HMIS® ratings
NFPA ratings
Health: 3 Flammability: 4 Physical hazard: 0 Health: 2 Flammability: 4 Instability: 0
NFPA ratings
4 2
Disclaimer
Revision information
0
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. This document has undergone significant changes and should be reviewed in its entirety.
Material name: Nano Dry Lubricant NDT11D Version #: 03 Revision date: 06-30-2016
SDS US
Issue date: 04-16-2015
10 / 10
AH-64 Apache Helicoptor R&D Team
OIL STABILIZER • Extends oil life up to 100%. • Improves horsepower. • Protects against friction and engine wear. • Protects against viscosity breakdown. • Improves oil pressure and reduces temperature. • Reduces dry starts. • Reduces knocking. • Compatible with synthetics. • Up to 40% reduction in scarring in the 4-Ball Wear Test. • Up to 68% reduction in wear metals. • Up to 60% faster in reducing oil temperatures. • Anti-foaming qualities to increase performance. Works great and field-tested on Race Cars, Conventional Cars, SUV’s & Trucks, Marine Engines, RV, Industrial Motors, Class 1-8 Trucks and Buses.
18
Conor Daly Nano Racing Team Indycar Series
NANO ProMT Oil Stabilizer is a Military Tough/Race Ready, extreme pressure Oil Stabilizer engineered to protect vital engine components against friction and engine wear. Using NANO ProMT Oil Stabilizer reduces oil temperatures up to 60% faster than standard lubricants, it reduces dry starts and viscosity breakdown for improved horsepower and oil pressure. All of which extends oil life up to 100%.
DESCRIPTION
SYNTHETIC OIL STABILIZER
PART#
NDT32OS
UPC CODE
853770004149
SCC CODE
10853770004146
HARMONIC CODE
3811.21.00
PACKAGE CONTENTS
32 oz
SELLING UNIT WEIGHT
2.0833 pounds
SELLING UNIT DIMENSION
3.43” x 3.43” x 11.75”
SELLING UNIT CUBE
.077 cubic feet
CASE PACK
12
CASE WEIGHT
25 pounds
CASE DIMENSION
14” x 10.75” x 12.5”
CASE CUBE
1.09 cubic feet
CASES PER PALLET
11
CASES/LAYER
4
LAYERS/PALLET
44
WEIGHT/PALLET
1,150 + 40 (total weight 1,190 lbs.)
NANO ProMT • 7427 Matthews Mint Hill Rd • Ste 201 Mint Hill • NC 28227 • www.nanopromt.com • Made in USA ©2016 NanoProMT™
08-2016
SAFETY DATA SHEET
1. Identification Product identifier
Nano Oil Stabilizer
Other means of identification SDS number
NDT32OS
Part No.
NDT32OS
Recommended use
Not available.
Recommended restrictions
None known.
Manufacturer/Importer/Supplier/Distributor information Manufacturer Company name Address Telephone E-mail Contact person Emergency phone number
Nano ProMT LLC 7427 Matthews Mint Hill Road, Suite 201 Mint Hill, NC 28227 Not available. Not available. Chris Hunter Not available.
2. Hazard(s) identification Physical hazards
Not classified.
Health hazards
Carcinogenicity
Category 1B
Specific target organ toxicity, single exposure Category 3 narcotic effects Environmental hazards
Not classified.
OSHA defined hazards
Not classified.
Label elements
Signal word
Danger
Hazard statement
May cause drowsiness or dizziness. May cause cancer.
Precautionary statement Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid breathing mist or vapor. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection/face protection.
Response
If inhaled: Remove person to fresh air and keep comfortable for breathing. If exposed or concerned: Get medical advice/attention. Call a poison center/doctor if you feel unwell.
Storage
Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazard(s) not otherwise classified (HNOC)
None known.
Supplemental information
None.
3. Composition/information on ingredients Mixtures Chemical name
Common name and synonyms
Distillates (petroleum), Hydrotreated Heavy Paraffinic
Material name: Nano Oil Stabilizer NDT32OS Version #: 02 Revision date: 04-15-2016
CAS number
%
64742-54-7
40 - < 50
SDS US
Issue date: 04-13-2016
1/7
Chemical name
Common name and synonyms
CAS number
%
Distillates (petroleum), 64741-88-4 40 - < 50 Solvent-refined Heavy Paraffinic Other components below reportable levels 3-
