International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered Period from 01 August to 31 August 2015 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat.
TC 12
Quantities and units
ISO/CD 800009
Quantities and units — Part 9: Physical chemistry and molecular physics
TC 22
Road vehicles
ISO/CD 7637-4
Road Vehicles — Electrical disturbance by conduction and coupling — Part 4: Electrical transient conduction along shielded high voltage supply lines only
ISO/CD 3888-1
Passenger cars — Test track for a severe lane-change manoeuvre — Part 1: Double lane-change
ISO/CD 7975
Passenger cars — Braking in a turn — Open-loop test method
ISO/CD 9816
Passenger cars — Power-off reaction of a vehicle in a turn — Open-loop test method
ISO/DTR 17950
Impact test procedures for road vehicles — Seating and positioning procedures for anthropomorphic test devices
TC 28
Petroleum products and related products of synthetic or biological origin
ISO/CD 6246
Petroleum products — Gum content of light and middle distillate fuels — Jet evaporation method
TC 30
Measurement of fluid flow in closed conduits
ISO/CD 20456
Measurement of fluid flow in closed conduits — Guidance for the use of electromagnetic flowmeters for liquids
TC 31
Tyres, rims and valves
ISO/CD 16992
Passenger car tyres — Spare unit substitutive equipment (SUSE)
ISO/CD 19940
Tyre Stiffness Index testing procedure for Passenger Extended Mobility tyres
TC 39
Machine tools
ISO/CD 130411
Test conditions for numerically controlled turning machines and turning centres — Part 1: Geometric tests for machines with a horizontal workholding spindle
ISO/CD TR 17243-2
Machine tool spindles — Evaluation of spindle vibrations by measurements on non-rotating parts — Part 2: Direct driven spindles and belt driven spindles with rolling element bearings operating at speeds between 600 min-1 and 30 000 min-1
TC 45
Rubber and rubber products
ISO/DTS 289-4
Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 4: Determination of the Mooney stressrelaxation rate
TC 61
Plastics
ISO/CD 220071
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles
TC 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/CD 35106
Petroleum and natural gas industries — Arctic operations — Arctic metocean, ice and seabed data
TC 69
Applications of statistical methods
ISO/CD TR 16355-8
Application of statistical and related methods to new technology and product development process — Part 8: Guidelines for commercialization and life cycle
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO/CD 194611
Radiological protection — Measurement for the clearance of waste contaminated with radioisotopes for medical application — Part 1: Measurement of radioactivity
ISO/CD 22875
Nuclear energy — Determination of chlorine and fluorine in uranium dioxide powder and sintered pellets
TC 121
Anaesthetic and respiratory equipment
ISO/CD 11195
Gas mixers for medical use — Stand-alone gas mixers
TC 127
Earth-moving machinery
ISO/CD 109872
Earth-moving machinery — Sustainability — Terminology, sustainability factors and reporting — Part 2: Remanufacturing
ISO/CD 109873
Earth-moving machinery — Sustainability — Terminology, sustainability factors and reporting — Part 3: Used machines
ISO/DTR 19948
Conformity Assessment and Certification Process for Earth-moving Machinery
TC 130
Graphic technology
ISO/DTS 15311-2
Graphic technology — Requirements for printed matter for commercial and industrial production — Part 2: Commercial production printing
ISO/CD 16762
Graphic technology — Requirements for postpress — General
ISO/CD 20690
Power consumption of digital printing devices
TC 131
Fluid power systems
ISO/CD 6162-2
Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
ISO/DTS 11686
Connectors for fluid power and general use – Assembly instructions for connectors with adjustable stud ends and O-ring sealing
ISO/CD 5782-1
Pneumatic fluid power — Compressed-air filters — Part 1: Main characteristics to be included in suppliers' literature and product marking requirements
ISO/CD 20145
Pneumatic fluid power — Test method for measuring acoustic emission pressure level of exhaust silencers.
TC 146
Air quality
ISO/CD 19087
Workplace air — Measurement of respirable crystalline silica by infrared spectrometry
TC 147
Water quality
ISO/CD 20596
Water quality — Determination of cyclic volatile methylsiloxanes in water — Method using gas chromatography-mass spectrometry (GC-MS)
TC 171
Document management applications
ISO/CD 142892
Document management applications — Electronic document file format enhancement for accessibility — Part 2: Use of ISO 32000-2 (PDF/UA-2)
TC 190
Soil quality
ISO/CD 20295
Soil quality — Determination of perchlorate in soil using ion chromatography
TC 195
Building construction machinery and equipment
ISO/CD 197201
Building construction machinery and equipment — Plants for the preparation of concrete and mortar — Part 1: Terminology and commercial specifications
TC 197
Hydrogen technologies
ISO/DTR 19880-1
Gaseous hydrogen — Fueling stations — Part 1: General requirements
ISO/CD 19881
Gaseous Hydrogen — Land Vehicle Fuel Tanks
TC 199
Safety of machinery
ISO/CD 17305
Safety of machinery — Safety functions of control systems
TC 204
Intelligent transport systems
ISO/DTS 21219-14
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 14: Parking information application (TPEG2-PKI)
ISO/DTS 21219-15
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 15: Traffic event compact (TPEG2-TEC)
ISO/DTS 21219-16
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol expert group, generation 2 (TPEG2) — Part 16: Fuel price information application (TPEG2-FPI)
TC 220
Cryogenic vessels
ISO/CD 23208
Cryogenic vessels — Cleanliness for cryogenic service
TC 238
Solid biofuels
ISO/CD 19743
Solid biofuels — Determination of content of heavy extraneous materials large than 3,15 mm
TC 249
Traditional chinese medicine
ISO/CD 20408
Traditional Chinese Medicine-Panax Notoginseng Seeds and Seedlings
TC 268
Sustainable development in communities
ISO/DTR 37121
Inventory and review of existing indicators on sustainable development and resilience in cities
CASCO
Committee on conformity assessment
ISO/IEC CD 17011
Conformity assessment — Requirements for accreditation bodies accrediting conformity assessment bodies
JTC 1
Information technology
ISO/IEC/IEEE PDTS 24748-6
Systems and software engineering — Life cycle management — Part 6: Guide to system integration engineering
ISO/IEC PDTR 29110-5-1-3
Systems and software engineering - Lifecycle profiles for Very Small Entities (VSE) — Part 5-1-3: Software engineering Management and engineering guide: Generic profile group - Intermediate profile
ISO/IEC CD 10118-1
Information technology — Security techniques — Hash-functions — Part 1: General
ISO/IEC CD 19592-1
Information technology — Security techniques — Secret Sharing — Part 1: General
ISO/IEC 1449610:2014/PDAM 3
Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding — Amendment 3: Additional Supplemental Enhancement Information
ISO/IEC CD 14496-33
Information technology — Coding of audio-visual objects — Part 33: Internet Video Coding
ISO/IEC CD 15938-14
Information technology — Multimedia content description interface — Part 14: Reference software, conformance and usage guidelines for Compact Descriptors for Visual Search (CDVS)
ISO/IEC CD 30107-3
Information technology — Biometric presentation attack detection — Part 3: Testing and reporting
ISO/IEC CD 20000-6
Information Technology — Service Management — Part 6: Requirements for bodies providing audit and certification of service management systems
DIS circulated Period from 01 August to 31 August 2015 These documents have obtained substantial support within the appropriate ISO technical committee. They have been submitted to the ISO member bodies for voting by the date shown. * Available in English only
Vote terminates
PC 252
Natural gas fuelling stations for vehicles
ISO/DIS 16923.2
*
ISO/DIS 16924.2
*
2015-10-18
Natural gas fuelling stations — LNG stations for fuelling vehicles 2015-10-18
TC 6 ISO/DIS
Natural gas fuelling stations — CNG stations for fuelling vehicles
Paper, board and pulps *
Paper and board — Determination of internal bond strength
16260.2
2015-10-28
TC 17 ISO/DIS 4885
Steel *
Ferrous products — Heat treatments — Vocabulary 2015-11-07 (Revision of ISO 4885:1996)
ISO/DIS 14590
*
Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
2015-11-11
(Revision of ISO 14590:2005)
TC 21 ISO/DIS 61826
Equipment for fire protection and fire fighting *
Fire protection — Automatic sprinkler systems — Part 6: Requirements and test methods for check valves
2015-11-04
(Revision of ISO 6182-6:2006) ISO/DIS 61827
*
Fire protection — Automatic sprinkler systems — Part 7: Requirements and test methods for early suppression fast response (ESFR) sprinklers
2015-11-18
(Revision of ISO 6182-7:2004) ISO/DIS 618213
*
TC 22
Fire protection — Automatic sprinkler systems — Part 13: Requirements and test methods for extended-coverage sprinklers
2015-11-18
Road vehicles
ISO/DIS 18541-6
*
ISO/DIS 3536
*
Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 6: L-Category vehicle specific RMI use cases and requirements
2015-11-07
Road vehicles — Safety glazing materials — Vocabulary 2015-11-04 (Revision of ISO 3536:1999)
ISO/DIS 15500-2
*
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 2: Performance and general test methods
2015-11-20
(Revision of ISO 15500-2:2012) ISO 155003:2012/DAmd 1
*
ISO 155004:2012/DAmd 1
*
ISO 155005:2012/DAmd 1
*
ISO 155006:2012/DAmd 1
*
ISO 155009:2012/DAmd 1
*
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 3: Check valve — Amendment 1
2015-11-20
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 4: Manual valve — Amendment 1
2015-11-20
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 5: Manual cylinder valve — Amendment 1
2015-11-20
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 6: Automatic valve — Amendment 1
2015-11-20
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 9: Pressure regulator — Amendment 1
2015-11-20
ISO 1550013:2012/DAmd 1
*
ISO 1550014:2012/DAmd 1
*
ISO 1550016:2012/DAmd 1
*
ISO 1550017:2012/DAmd 1
*
ISO 1550018:2012/DAmd 1
*
ISO 1550019:2012/DAmd 1
*
TC 23 *
ISO 53953:2013/DAmd 1
*
ISO 158863:2012/DAmd 1
*
TC 33
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 14: Excess flow valve — Amendment 1
2015-11-20
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 16: Rigid fuel line in stainless steel — Amendment 1
2015-11-20
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 17: Flexible fuel line — Amendment 1
2015-11-20
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 18: Filter — Amendment 1
2015-11-20
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 19: Fittings — Amendment 1
2015-11-20
Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 2: Pedestrian-controlled lawnmowers — Amendment 1: OPC, Cutting means acceptance criteria — Pressurized hoses of hydraulic systems Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator — Amendment 1: OPC, Parking brake, ROPS, Pressurized hoses of hydraulic systems, Cutting means acceptance criteria, Clause A.2.7, Annex B Figure 4 Agricultural irrigation equipment — Sprinklers — Part 3: Characterization of distribution and test methods — Amendment 1
2015-11-07
2015-11-07
2015-11-18
Refractories *
TC 34 ISO/DIS 10273
2015-11-20
Tractors and machinery for agriculture and forestry
ISO 53952:2013/DAmd 1
ISO/DIS 18886
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 13: Pressure relief device (PRD) — Amendment 1
Refractory test-piece preparation — Gunning refractory panels by wet gunning techniques
2015-11-18
Food products *
Microbiology of the food chain — Horizontal method for the detection of pathogenic Yersinia enterocolitica
2015-11-07
(Revision of ISO 10273:2003) ISO/DIS 15216-1
*
Microbiology of the food chain — Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR — Part 1: Method for quantification
2015-11-07
(Revision of ISO/TS 15216-1:2013)
TC 38 ISO/DIS 12947-2.2
Textiles *
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown
2015-10-14
(Revision of ISO 12947-2:1998, ISO 12947-2:1998/Cor 1:2002)
TC 44 ISO/DIS 22829
Welding and allied processes *
Resistance welding — Transformer-rectifier for welding guns with integrated transformers — Transformer-rectifier units operating at 1000 Hz frequency
2015-11-14
(Revision of ISO 22829:2007) ISO/DIS 15618-1
*
Qualification testing of welders for underwater welding — Part 1: Diver-welders for hyperbaric wet welding
2015-11-07
(Revision of ISO 15618-1:2001)
TC 45 ISO/DIS 8789
Rubber and rubber products *
Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles — Specification
2015-11-12
(Revision of ISO 8789:2009) ISO/DIS 1434.2
*
Natural rubber in bales — Amount of bale coating — Determination 2015-10-12 (Revision of ISO 1434:1995)
TC 61 ISO/DIS 10433
Plastics *
Plastics — Symbols and abbreviated terms — Part 3: Plasticizers 2015-11-07 (Revision of ISO 1043-3:1996)
ISO/DIS 11469
*
Plastics — Generic identification and marking of plastics products 2015-11-14 (Revision of ISO 11469:2000)
TC 67
ISO/DIS 14692-1
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries *
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1: Vocabulary, symbols, applications and materials
2015-11-07
(Revision of ISO 14692-1:2002) ISO/DIS 14692-2
*
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture
2015-11-14
(Revision of ISO 14692-2:2002, ISO 14692-2:2002/Cor 1:2005) ISO/DIS 14692-3
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design
2015-11-07
(Revision of ISO 14692-3:2002, ISO 14692-3:2002/Cor 1:2005) ISO/DIS 14692-4
*
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation
2015-11-14
(Revision of ISO 14692-4:2002, ISO 14692-4:2002/Cor 1:2006) ISO/DIS 19901-2
*
Petroleum and natural gas industries — Specific requirements for offshore structures — Part 2: Seismic design procedures and criteria (Revision of ISO 19901-2:2004)
TC 83 ISO/DIS 8936
Sports and other recreational facilities and equipment *
Awnings for leisure accommodation vehicles — Requirements and test methods
2015-11-14
2015-11-14 (Revision of ISO 8936:2007) ISO/DIS 20957-4
*
Stationary training equipment — Part 4: Strength training benches, additional specific safety requirements and test methods
2016-01-29
(Revision of ISO 20957-4:2005) ISO/DIS 20957-5
*
Stationary training equipment — Part 5: Pedal crank training equipment, additional specific safety requirements and test methods
2016-01-22
(Revision of ISO 20957-5:2005)
TC 85
Nuclear energy, nuclear technologies, and radiological protection
ISO/DIS 11665-10.2
Measurement of radioactivity in the environment — Air: radon-222 — Part 10: Determination of diffusion coefficient in waterproof materials using activity concentration measurement
TC 92
Fire safety
ISO/DIS 12828-2
*
Personal safety -- Protective clothing and equipment *
TC 96 ISO/DIS 43063.2
Validation methods for fire gas analyses — Part 2: Validation of quantification method 2015-11-25
TC 94 ISO/DIS 16975-1.3
2015-10-26
Respiratory protective devices — Selection, use and maintenance — Part 1: Establishing and implementing a respiratory protective device programme
2015-10-29
Cranes *
Cranes — Vocabulary — Part 3: Tower cranes 2015-10-18 (Revision of ISO 4306-3:2003, ISO 4306-3:2003/Amd 1:2011)
TC 107 ISO/DIS 19487
Metallic and other inorganic coatings *
TC 108 ISO/DIS 16063-17
Metallic and other inorganic coatings — Electrodeposited nickel-ceramics composite coating
2015-11-04
Mechanical vibration, shock and condition monitoring *
Methods for the calibration of vibration and shock transducers — Part 17: Primary calibration by centrifuge
2015-11-25
(Revision of ISO 5347-7:1993) ISO/DIS 10326-1
*
Mechanical vibration — Laboratory method for evaluating vehicle seat vibration — Part 1: Basic requirements
2015-11-14
(Revision of ISO 10326-1:1992, ISO 10326-1:1992/Amd 1:2007, ISO 103261:1992/Amd 2:2011)
TC 110 ISO/DIS 18063-1
Industrial trucks *
Rough-terrain trucks — Visibility — Test methods and their verification — Part 1: Variable-reach trucks (Revision of ISO/CD 18063)
TC 121
Anaesthetic and respiratory equipment
2015-11-06
ISO/DIS 5366
*
Anaesthetic and respiratory equipment — Tracheostomy tubes 2015-11-14 (Revision of ISO/DIS 5366-1, ISO/DIS 5366-3)
TC 123 ISO/DIS 19349
Plain bearings *
Plain bearings — Lubrication and control 2015-11-18
TC 130 ISO/DIS 12634
Graphic technology *
Graphic technology — Determination of tack of paste inks and vehicles by a rotary tackmeter
2015-11-18
(Revision of ISO 12634:1996)
TC 150 ISO/DIS 14708-3
Implants for surgery *
Implants for surgery — Active implantable medical devices — Part 3: Implantable neurostimulators
2015-11-14
(Revision of ISO 14708-3:2008)
TC 156 ISO/DIS 65092.2
Corrosion of metals and alloys *
Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 2: Assessment criteria
2015-10-18
(Revision of ISO 6509:1981) ISO/DIS 9227
*
Corrosion tests in artificial atmospheres — Salt spray tests 2015-11-14 (Revision of ISO 9227:2012)
TC 157 ISO/DIS 25841
Non-systemic contraceptives and STI barrier prophylactics *
Female condoms — Requirements and test methods 2015-11-04 (Revision of ISO 25841:2014)
TC 159 ISO/DIS 9241960
Ergonomics *
TC 163
Ergonomics of human-system interaction — Part 960: Framework and guidance for gesture interactions
2015-11-07
Thermal performance and energy use in the built environment
ISO/DIS 52000-1
*
ISO/DIS 52003-1
*
Energy performance of buildings — Overarching EPB assessment — Part 1: General framework and procedures
2015-11-28
Energy performance of buildings — Indicators, requirements and certification — Part 1: General aspects and application to the overall energy performance
2015-11-07
(Revision of ISO 16343:2013) ISO/DIS 16957
TC 164
*
Measurement of apparent thermal conductivity of wet porous building materials by a periodic method
Mechanical testing of metals
2015-11-12
ISO/DIS 148-1
*
Metallic materials — Charpy pendulum impact test — Part 1: Test method 2016-01-22 (Revision of ISO 148-1:2009)
ISO/DIS 148-2
*
Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
2015-11-07
(Revision of ISO 148-2:2008) ISO/DIS 148-3
*
Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
2015-11-07
(Revision of ISO 148-3:2008)
TC 165
Timber structures
ISO/DIS 12122-3
*
ISO/DIS 12122-4
*
TC 172 ISO/DIS 18189
Timber structures — Determination of characteristic values — Part 3: Glued laminated timber
2015-11-18
Timber structures — Determination of characteristic values — Part 4: Engineered wood products
2015-11-16
Optics and photonics *
Ophthalmic optics — Contact lenses and contact lens care products — Cytotoxicity testing of contact lenses and contact lens care solutions
TC 184
Automation systems and integration
IEC/DIS 62264-3
Enterprise-control system integration — Part 3: Activity models of manufacturing operations management
2015-11-18
2015-11-08
(Revision of IEC 62264-3:2007) IEC/DIS 62264-5
Enterprise-control system integration — Part 5: Business to manufacturing transactions
TC 204
Intelligent transport systems
ISO/DIS 18495-1.2
2015-11-08
*
TC 210
ISO/DIS 15223-1
Intelligent transport systems — Commercial freight — Automotive visibility in the distribution supply chain — Part 1: Architecture and data definitions
2015-10-18
Quality management and corresponding general aspects for medical devices *
Medical devices — Symbols to be used with medical device labels, labelling and information to be supplied — Part 1: General requirements
2015-11-07
(Revision of ISO 15223-1:2012)
TC 211 ISO/DIS 19104
Geographic information/Geomatics *
Geographic information — Terminology 2015-11-18 (Revision of ISO/TS 19104:2008)
TC 216 ISO/DIS 17708
Footwear *
Footwear — Test methods for whole shoe — Upper sole adhesion
2016-01-29 (Revision of ISO 17708:2003)
TC 217 ISO/DIS 16128-2
Cosmetics *
TC 218 ISO/DIS 13061-5
Guidelines on technical definitions and criteria for natural & organic cosmetic ingredients and products — Part 2: Criteria for ingredients and products
2015-11-29
Timber *
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 5: Determination of strength in compression perpendicular to grain
2015-11-04
(Revision of ISO 3132:1975) ISO/DIS 13061-10
*
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 10: Determination of impact bending strength
2015-11-04
(Revision of ISO 3348:1975) ISO/DIS 13061-12
*
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 12: Determination of static hardness
2015-11-04
(Revision of ISO 3350:1975) ISO/DIS 13061-13
*
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 13: Determination of radial and tangential shrinkage
2015-11-04
(Revision of ISO 4469:1981) ISO/DIS 13061-14
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 14: Determination of volumetric shrinkage
2015-11-04
(Revision of ISO 4858:1982) ISO/DIS 13061-17
*
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 17: Determination of ultimate stress in compression parallel to grain
2015-11-04
(Revision of ISO 3787:1976)
TC 219 ISO/DIS 10582
Floor coverings *
Resilient floor coverings — Specification for heterogeneous vinyl flooring to include luxury vinyl tile requirements
2015-11-14
(Revision of ISO 10582:2010)
TC 260 ISO/DIS 30400
Human resource management *
Human resource management — Terminology 2015-11-18
ISO/DIS 30408
*
Human resource management — Guidelines on human governance 2015-11-04
TC 292 ISO/DIS 22325
Security and resilience *
Societal security — Emergency management — Guidelines for emergency management capability assessment
2015-11-13
JTC 1 ISO/IEC DIS 16512-1
Information technology *
Information technology — Relayed Multicast Control Protocol (RMCP) — Framework — Part 1:
2015-11-12
(Revision of ISO/IEC 16512-1:2005) ISO/IEC DIS 16512-2
*
Information technology — Relayed multicast protocol: Specification for simplex group applications — Part 2:
2015-11-12
(Revision of ISO/IEC 16512-2:2011) ISO/IEC DIS 25022.2
*
Systems and software engineering — Systems and software quality requirements and evaluation (SQuaRE) — Measurement of quality in use
2015-10-04
(Revision of ISO/IEC TR 9126-4:2004) ISO/IEC DIS 25023.2
*
Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Measurement of system and software product quality
2015-10-07
(Revision of ISO/IEC TR 9126-2:2003, ISO/IEC TR 9126-3:2003) ISO/IEC DIS 26557
*
ISO/IEC 180133:2009/DAmd 3
*
ISO/IEC DIS 18041-4
*
Software and systems engineering — methods and tools for variability mechanisms in software and systems product line
2015-11-11
Information technology — Personal identification — ISO-compliant driving licence — Part 3: Access control, authentication and integrity validation — Amendment 3: PACE
2015-11-18
Information technology — Computer graphics, image processing and environmental data representation — Environmental Data Coding Specification (EDCS) language bindings — Part 4: C
2015-11-14
(Revision of ISO/IEC 18041-4:2007) ISO/IEC DIS 10116
*
Information technology — Security techniques — Modes of operation for an n-bit block cipher
2015-11-18
(Revision of ISO/IEC 10116:2006, ISO/IEC 10116:2006/Cor 1:2008) ISO/IEC DIS 27009
*
ISO/IEC 230088:2015/DAmd 1
*
ISO/IEC DIS 18000-4
*
Information technology — Security techniques — Sector-specific application of ISO/IEC 27001 — Requirements
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 8: Conformance Specification for HEVC — Amendment 1: Conformance testing for Multiview Main and 3D Main Profiles of HEVC
Information technology — Radio frequency identification for item management — Part 4: Parameters for air interface communications at 2,45 GHz
2015-10-27
2015-11-26
2015-11-12
(Revision of ISO/IEC 18000-4:2015) ISO/IEC DIS 30134-1.2
*
ISO/IEC DIS 30134-2.2
*
ISO/IEC DIS 30134-3.2
*
Information Technology — Data Centres — Key performance indicators — Part 1: Overview and general requirements
2015-10-04
Information Technology — Data Centres — Key performance indicators — Part 2: Power usage effectiveness (PUE)
2015-10-04
Information Technology — Data Centres — Key Performance Indicators — Part 3: Renewable Energy Factor (REF)
2015-10-04
FDIS circulated Period from 01 August to 31 August 2015 These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown * Available in English only
Vote terminates
TC 4 ISO/FDIS 21107
Rolling bearings *
Rolling bearings and spherical plain bearings — Search structure for electronic media — Characteristics and performance criteria identified by property vocabulary
2015-10-18
(Revision of ISO 21107:2004)
TC 17 ISO/FDIS 4829-2
Steel *
Steels — Determination of total silicon contents — Reduced molybdosilicate spectrophotometric method — Part 2: Silicon contents between 0,01 % and 0,05 %
2015-10-21
(Revision of ISO 4829-2:1988) ISO/FDIS 4938
*
Steel and irons — Determination of nickel content — Gravimetric or titrimetric method 2015-10-21 (Revision of ISO 4938:1988)
ISO/FDIS 4939
*
Steel and cast iron — Determination of nickel content — Dimethylglyoxime spectrophotometric method
2015-10-21
(Revision of ISO 4939:1984) ISO/FDIS 4946
*
Steel and cast iron — Determination of copper content — 2,2'-Diquinolyl spectrophotometric method
2015-10-21
(Revision of ISO 4946:1984) ISO/FDIS 4991.2
*
Steel castings for pressure purposes 2015-10-13 (Revision of ISO 4991:2005)
ISO/FDIS 14737.2
*
Cast carbon and low alloy steels for general applications 2015-10-13 (Revision of ISO 3755:1991, ISO 14737:2003)
TC 23
Tractors and machinery for agriculture and forestry
ISO/FDIS 17989-1
*
TC 28
ISO/FDIS 10976
Tractors and machinery for agriculture and forestry — Sustainability — Part 1: Principles
2015-10-21
Petroleum products and related products of synthetic or biological origin *
Refrigerated light hydrocarbon fluids — Measurement of cargoes on board LNG carriers 2015-10-14 (Revision of ISO 10976:2012)
TC 31 ISO/FDIS 5775-2
Tyres, rims and valves *
Bicycle tyres and rims — Part 2: Rims 2015-10-26 (Revision of ISO 5775-2:1996, ISO 5775-2:1996/Amd 1:2001)
TC 38
Textiles
ISO/FDIS 18080-1
*
ISO/FDIS 18080-2
*
ISO/FDIS 18080-3
*
ISO/FDIS 18080-4
*
TC 44 ISO/FDIS 9015-2
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 1: Test method using corona charging
2015-10-15
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 2: Test method using rotary mechanical friction
2015-10-15
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 3: Test method using manual friction
2015-10-15
Textiles — Test methods for evaluating the electrostatic propensity of fabrics — Part 4: Test method using horizontal mechanical friction
2015-10-15
Welding and allied processes *
Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints
2015-10-21
(Revision of ISO 9015-2:2003) ISO/FDIS 8430-1
*
Resistance spot welding — Electrode holders — Part 1: Taper fixing 1:10 2015-10-28 (Revision of ISO 8430-1:1988)
ISO/FDIS 8430-2
*
Resistance spot welding — Electrode holders — Part 2: Morse taper fixing 2015-10-28 (Revision of ISO 8430-2:1988)
ISO/FDIS 8430-3
*
Resistance spot welding — Electrode holders — Part 3: Parallel shank fixing for end thrust
2015-10-28
(Revision of ISO 8430-3:1988, ISO 8430-3:1988/Cor 1:1990) ISO/FDIS 18278-2
*
Resistance welding — Weldability — Part 2: Evaluation procedures for weldability in spot welding (Revision of ISO 18278-2:2004)
TC 45
Rubber and rubber products
2015-10-28
ISO/FDIS 4642-1
*
Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 1: Semi-rigid hoses for fixed systems
2015-10-18
(Revision of ISO 4642-1:2009) ISO/FDIS 4642-2
*
Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles
2015-10-18
(Revision of ISO 4642-2:2009) ISO/FDIS 5774
*
Plastics hoses — Textile-reinforced types for compressed-air applications — Specification
2015-10-21
(Revision of ISO 5774:2006) ISO/FDIS 11235
*
Rubber compounding ingredients — Sulfenamide accelerators — Test methods 2015-10-28 (Revision of ISO 11235:1999)
ISO/FDIS 6123-2
*
Rubber or plastics covered rollers — Specifications — Part 2: Surface characteristics 2015-10-19 (Revision of ISO 6123-2:1988)
TC 48 ISO/FDIS 384
Laboratory equipment *
Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments
2015-10-14
(Revision of ISO 384:1978)
TC 58 ISO/FDIS 16148
Gas cylinders *
Gas cylinders — Refillable seamless steel gas cylinders and tubes — Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing
2015-10-28
(Revision of ISO 16148:2006)
TC 92 ISO/FDIS 13344
Fire safety *
Estimation of the lethal toxic potency of fire effluents
(Revision of ISO 13344:2004)
TC 107 ISO/FDIS 28706-4
Metallic and other inorganic coatings *
Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
2015-10-07
(Revision of ISO 28706-4:2008)
TC 110
Industrial trucks
ISO/FDIS 3691-2
*
ISO/FDIS 22915-1
*
Industrial trucks — Safety requirements and verification — Part 2: Self-propelled variable-reach trucks
2015-10-21
Industrial trucks — Verification of stability — Part 1: General 2015-10-18 (Revision of ISO 22915-1:2008)
TC 111 ISO 3266:2010/FD Amd 1
Round steel link chains, chain slings, components and accessories *
2015-10-14
TC 118 ISO 289278:2009/FDAmd 1.2
Compressors and pneumatic tools, machines and equipment *
TC 121 ISO/FDIS 5360
Forged steel eyebolts grade 4 for general lifting purposes — Amendment 1
Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action — Amendment 1: Polishing machines, modified feed forces
2015-10-21
Anaesthetic and respiratory equipment *
Anaesthetic vaporizers — Agent-specific filling systems 2015-10-07 (Revision of ISO 5360:2012)
ISO/FDIS 7396-1
*
Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum
2015-10-07
(Revision of ISO 7396-1:2007, ISO 7396-1:2007/Amd 1:2010, ISO 7396-1:2007/Amd 2:2010)
TC 122 ISO/FDIS 780
Packaging *
Packaging — Distribution packaging — Graphical symbols for handling and storage of packages
2015-10-21
(Revision of ISO 780:1997)
TC 135 ISO/FDIS 18563-3
Non-destructive testing *
TC 138 ISO/FDIS 9967
Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 3: Combined systems
2015-10-21
Plastics pipes, fittings and valves for the transport of fluids *
Thermoplastics pipes — Determination of creep ratio 2015-10-07 (Revision of ISO 9967:2007)
ISO/FDIS 9969
*
Thermoplastics pipes — Determination of ring stiffness 2015-10-07 (Revision of ISO 9969:2007)
TC 142 ISO/FDIS 16891
Cleaning equipment for air and other gases *
2015-10-07
TC 146 ISO/FDIS 18158
Air quality *
Workplace air — Terminology 2015-10-19
TC 153 ISO/FDIS 17292
Test methods for evaluating degradation of properties of cleanable filter media
Valves *
Metal ball valves for petroleum, petrochemical and allied industries 2015-10-07
(Revision of ISO 17292:2004)
TC 164 ISO/FDIS 7500-1
Mechanical testing of metals *
Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
2015-10-21
(Revision of ISO 7500-1:2004, ISO 7500-1:2004/Cor 1:2008) ISO/FDIS 7438
*
Metallic materials — Bend test 2015-10-21 (Revision of ISO 7438:2005)
TC 174 ISO/FDIS 8653
Jewellery *
Jewellery — Ring-sizes — Definition, measurement and designation 2015-10-12 (Revision of ISO 8653:1986)
TC 192 ISO/FDIS 19859
Gas turbines *
2015-10-18
TC 201 ISO/FDIS 14606
Gas turbine applications — Requirements for power generation
Surface chemical analysis *
Surface chemical analysis — Sputter depth profiling — Optimization using layered systems as reference materials
2015-10-26
(Revision of ISO 14606:2000)
TC 204 ISO/FDIS 12855
Intelligent transport systems *
Electronic fee collection — Information exchange between service provision and toll charging
2015-10-07
(Revision of ISO 12855:2012, ISO 12855:2012/Cor 1:2013)
TC 207 ISO/FDIS 14021
Environmental management *
Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling)
2015-10-28
(Revision of ISO 14021:1999, ISO 14021:1999/Amd 1:2011)
TC 209 ISO/FDIS 14644-1
Cleanrooms and associated controlled environments *
Cleanrooms and associated controlled environments — Part 1: Classification of air cleanliness by particle concentration
2015-10-28
(Revision of ISO 14644-1:1999) ISO/FDIS 14644-2
*
Cleanrooms and associated controlled environments — Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration (Revision of ISO 14644-2:2000)
TC 211 ISO/FDIS
Geographic information/Geomatics *
Geographic information — Rules for application schema
2015-10-28
19109
2015-10-21 (Revision of ISO 19109:2005)
TC 213 ISO/FDIS 16610-32
Dimensional and geometrical product specifications and verification *
Geometrical product specifications (GPS) — Filtration — Part 32: Robust profile filters: Spline filters
2015-10-07
(Revision of ISO/TS 16610-32:2009)
TC 215
Health informatics
ISO/IEEE FDIS 11073-10424
*
ISO/IEEE FDIS 11073-10425
*
ISO/IEEE FDIS 11073-20601
*
Health informatics — Personal health device communication — Part 10424: Device Specialization— — Sleep Apnoea Breathing Therapy Equipment (SABTE)
2016-01-21
Health informatics — Personal health device communication — Part 10425: Device specialization — Continuous glucose monitor (CGM)
2016-01-21
Health informatics — Personal health device communication — Part 20601: Application profile — Optimized exchange protocol
2016-01-21
(Revision of ISO/IEEE 11073-20601:2010, ISO/IEEE 11073-20601:2010/Amd 1:2015)
TC 221 ISO/FDIS 18325
Geosynthetics *
TC 238 ISO/FDIS 17831-2
Geosynthetics — Test method for the determination of water discharge capacity for prefabricated vertical drains
2015-10-18
Solid biofuels *
JTC 1
Solid biofuels — Determination of mechanical durability of pellets and briquettes — Part 2: Briquettes
2015-10-28
Information technology
ISO/IEC FDIS 25185-1
*
ISO/IEC/IEEE FDIS 8802-1Q
*
ISO/IEC FDIS 15026-3
*
Identification cards — Integrated circuit card authentication protocols — Part 1: Protocol for Lightweight Authentication of Identity
Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1Q: Bridges and Bridged Networks Systems and software engineering — Systems and software assurance — Part 3: System integrity levels
2015-10-13
2016-01-29
2015-10-19
(Revision of ISO/IEC 15026-3:2011) ISO/IEC FDIS 26550
*
Software and systems engineering — Reference model for product line engineering and management
2015-10-18
(Revision of ISO/IEC 26550:2013) ISO/IEC FDIS 26555
*
Software and systems engineering — Tools and methods for product line technical management
2015-10-18
(Revision of ISO/IEC 26555:2013) ISO/IEC FDIS 27013
*
Information technology — Security techniques — Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1
2015-10-05
(Revision of ISO/IEC 27013:2012) ISO/IEC 144964:2004/FDAmd 43
*
ISO/IEC 144965:2001/FDAmd 36
*
ISO/IEC 144965:2001/FDAmd 37
*
Information technology — Coding of audio-visual objects — Part 4: Conformance testing — Amendment 43: 3D-AVC conformance testing
2015-10-18
Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 36: Pattern-based 3D mesh coding reference software
2015-10-12
Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 37: New Levels for the AAC Profiles, uniDRC support, AAC block length parameter corrections
2015-10-18