List of Tables Table 1-1: Supplementary codes and standards
PROJECT DESIGN CODES AND STANDARDS MAY 2002 -2-
3
SCP ESIA AZERBAIJAN DRAFT FOR DISCLOSURE
1.
PROJECT DESIGN CODES AND STANDARDS
1.1
PRIMARY CODES
The primary codes for the design and construction of the SCP pipeline are: •
ASME B31.8
Gas Transmission and distribution pipeline systems (1999 Edition).
Generally the API / ASME & BSI codes will be utilized..
1.2
SUPPLEMENTARY CODES
The principal supplementary codes and standards upon which the engineering phase has been based are listed below in terms of: a) the principal codes/standards being used for design b) the principal national standard from where additional codes/standards may be obtained Table 1-1: Supplementary codes and standards
Mechanical American Society of Mechanical Engineers (ASME) • ASME VIII Latest Edition American Petroleum Institute (API) Supplemented by the following where appropriate: • National Fire Protection Association (NFPA) • NFPA 20 • National Association of Corrosion Engineers (NACE) • American Society of Testing of Materials (ASTM) • International Standards Organisation (ISO) • ISO 3046 Diesel Engines • British Standards Institute (BSI) • Chartered Institution of Building Services Engineers (CIBSE)
Loss Prevention Institute of Petroleum (IP) National Fire Protection Association (NFPA) British Standards Institute (BSI) Underwriters Laboratory (UL) Factory Mutual (FM) Industrial Risk Insurers (IRI) American Petroleum Institute (API)
MET (Material Engineering Technology) The design codes used by during the engineering design programme to date are as follows: PROJECT DESIGN CODES AND STANDARDS MAY 2002 -3-
SCP ESIA AZERBAIJAN DRAFT FOR DISCLOSURE
Table 1-1: Supplementary codes and standards • •
API 5L: Specification for Line Pipe – 42nd Edition Jan 2000 ISO 12094: Welded Steel Tubes for Pressure Purposes – Ultrasonic Testing for the Detection of Laminar Imperfections in Strips/Plates used in the Manufacture of Welded Tubes. • SNT-TC-1A: American Society of Non-Destructive testing, Standard for Qualification and Certification of Non-Destructive Testing Personnel Principal National Body American Petroleum Institute (API) Supplemented by the following where appropriate: • American National Standards Institute (ANSI) • American Society of Mechanical Engineers (ASME) • American Society of Non-Destructive Testing (ASNT) • American Society of Testing and Materials (ASTM) • International Standards Organisation (ISO) • Manufacturers Standardisation Society (MSS) • National Association of Corrosion Engineers (NACE) • Steel Structures Painting Council (SSPC)
Process / Hydraulics American National Standards Institute (ANSI) Piping •
Institute of Petroleum, Model Code of Safe Practice, Part 19, Fire Precautions at Petroleum Refineries and Bulk Storage Installations • IM 2.5.2 June 3 1996 Hazard Classification of Process Operations for Spacing Requirements Supplemented by the following where appropriate: • American National Standards Institute (ANSI) • American Petroleum Institute (API) • American Society of Testing and Materials (ASTM)
Control Systems American Petroleum Institute (API) Hardware Installation International Electrotechnical Commission (IEC) Electrical Installation & certification National Fire Protection Association (NFPA) • IEC 61508 Supplemented by the following where appropriate: • American Society of Testing and Materials (ASTM) • American Society of Mechanical Engineers (ASME) • British Standards Institute (BSI) • European Economic Community (EEC) • Instrument Society of America (ISA) • International Standards Organisation (ISO)
Electrical IP 15 IEC BSI when above are not applicable PROJECT DESIGN CODES AND STANDARDS MAY 2002 -4-
SCP ESIA AZERBAIJAN DRAFT FOR DISCLOSURE
Table 1-1: Supplementary codes and standards
Telecommunications International Telecomms Union (ITU) • ITU -T ReC G707: Synchronous Digital Hierarchy • ITU -T G705: Characteristics Required to Terminate Digital Links on a Digital Exchange • ITU -T G703: Physical / Electrical Characteristics of Hierarchical Digital Interfaces • ITU -T G652: Characteristics of Surface Mode Simple Mode Official Fibre Cable Supplemented by the following where appropriate: • International Electrotechnical Commission (IEC) • International Standards Organisation (ISO) • European Telecommunications Standards Institute (ETSI) • Normalised Standards of the European Union (Euronorms) (EN) • British Standards Institute (BSI) • American National Standards Institute (ANSI) • Institute of Electrical and Electronic Engineers (IEEE) • Electronic Industries Association (EIA) • Telecommunication Industries Association (TIA)
