CW Product Submittal Sheet Tech Support: 888-437-3244 Design Services: 877-832-3206
Sales: 800-543-7140 clarkwestern.com
09.22.36 (Metal Lath)
Flat Diamond Mesh Lath Metal Lath
A Galvanized Expanded Steel Plaster/Stucco Base A superior multi-purpose expanded steel base widely used for interior and exterior plaster and stucco reinforcement. The flat surface is easily cut and formed for use with flat or contoured surfaces. It is an excellent base for stone, spray on structural fireproofing, ornamental work, and under ceramic tile. Expanded metal lath is formed from sheet steel that has been slit and expanded to form thousands of plaster “keys” per square yard. Its time proven exceptional strength and flexibility makes it the preferred metal base requested by quality oriented contractors and design professionals.
Product Data & Ordering Information:
x Strength of Steel x Multiple Application Uses x Proven Historical Success
Material: G-60 Galvanized Steel, Packaged: 50 bundles or 500 pieces per pallet
Finish
Wt. per Sq Yd.
Sheet Size
Pcs./Bdl.
Yds./Bdl.
Yds./Pallet
Galv.
1.75 lbs.
27” x 96”
10
20
1000
Galv.
2.5 lbs.
27” x 96”
10
20
1000
Galv.
3.4 lbs.
27” x 96”
10
20
1000
ASTM & Code Standards: x ASTM C841 (interior), C1063 (exterior), C847, CE 240.01 and ML/SFA-920. x All ClarkWestern Expanded Metal Lath is fabricated from prime galvanized steel, G60 zinc coating by the hot dipped method, conforming to Specification ASTM A-653/A-653M. x MSDS & Product Certification Information is available @ clarkwestern.com x For installation and placement instruction refer to ASTM C1063 and C841.
Storage: All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level platform, and protected from the weather and surface contamination. Per ASTM C-1063.
Limitations: Galvanized steel products should not be used with magnesium oxychloride cement stucco or Portland cement stucco containing calcium chloride additives.
Related Products: x Diamond Mesh Self Furring Metal Lath x Asphalt Paper-backed Metal Lath x 3/8” High Rib Metal Lath
Full sized lath panel GREEN Benefits and Recycled Content: LEED Credit MR 2 - ClarkWestern products are manufactured from cold-formed steel. Steel is 100% recyclable, which helps divert debris from the waste stream. The contribution to LEED must be calculated by the contractor based on weight or volume. LEED Credit MR 4 - ClarkWestern's steel products have a minimum of 25.5% post-consumer recycled content, and 6.8% pre-consumer. If you wish to report a higher number for your project or seek Credit MR 5 please contact Tech Support at 888-437-3244 or visit www.clarkwestern.com. CW-Lath-DML © 09/08 ClarkWestern Building Systems, Inc.
Project Information
Contractor Information
Architect Information
Name: Address:
Name: Contact: Phone: Fax:
Name: Contact: Phone: Fax:
CW Product Submittal Sheet Tech Support: 888-437-3244 Design Services: 877-832-3206
Sales: 800-543-7140 clarkwestern.com
09.22.36 (Metal Lath)
Dimple Self Furring Lath
Metal Lath
A Galvanized Expanded Steel Plaster/Stucco Base A self furring expanded dimpled metal lath ideal for interior and exterior use over sheathing, masonry and other solid surfaces as required per ASTM C1063. The dimple self-furring plaster base is manufactured with evenly spaced indentations that hold the metal lath ¼” away from the surface to be plastered. Self-furring metal lath is available with or without a Grade D asphalt paper-backing, breather sheet.
Product Data & Ordering Information: Material: G-60 Galvanized Steel Packaged: 25 bundles or 250 pieces per pallet
Finish
Wt. per Sq Yd.
Sheet Size
Galv.
1.75 lbs.
27” x 96”
10
20
500
Galv.
2.5 lbs.
27” x 96”
10
20
500
Galv.
3.4 lbs.
27” x 96”
10
20
500
Pcs./Bdl.
Yds./Bdl.
Yds./Pallet
x Complete embedment of stucco or plaster x No need to use furring nails x Maintains consistent plaster depths
ASTM & Code Standards: x ASTM C841 (interior), C1063 (exterior), C847, CE 240.01 and ML/SFA-920 x All Expanded Metal Lath is fabricated from prime galvanized steel, G60 zinc coating by the hot dipped method, conforming to Specification ASTM A-653/A-653M. x MSDS & Product Certification Information is available @ clarkwestern.com. x For installation and placement instruction refer to ASTM C1063 and C841.
Storage: All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level platform, and protected from the weather and surface contamination. Per ASTM C-1063
Limitations: Galvanized steel products should not be used with magnesium oxychloride cement stucco or Portland cement stucco containing calcium chloride additives.
Related Products: x Diamond Mesh V-Groove Self Furring Metal Lath x Diamond Mesh Asphalt Paper-Backed Grade D Diamond Mesh Metal Lath x 3/8” High Rib Metal Lath
GREEN Benefits and Recycled Content: LEED Credit MR 2 - ClarkWestern products are manufactured from cold-formed steel. Steel is 100% recyclable, which helps divert debris from the waste stream. The contribution to LEED must be calculated by the contractor based on weight or volume. LEED Credit MR 4 - ClarkWestern's steel products have a minimum of 25.5% post-consumer recycled content, and 6.8% pre-consumer. If you wish to report a higher number for your project or seek Credit MR 5 please contact Tech Support at 888-437-3244 or visit www.clarkwestern.com.
Full sized lath panel
CW-Lath-SFDL © 09/08 ClarkWestern Building Systems, Inc.
Project Information
Contractor Information
Architect Information
Name: Address:
Name: Contact: Phone: Fax:
Name: Contact: Phone: Fax:
CW Product Submittal Sheet Tech Support: 888-437-3244 Design Services: 877-832-3206
Sales: 800-543-7140 clarkwestern.com
09.22.36 (Metal Lath)
V-Groove Self Furring Lath Metal Lath
A Galvanized Expanded Steel Plaster/Stucco Base A self furring expanded V-grooved metal lath, ideal for interior and exterior use over sheathing, masonry and other solid surfaces as required per ASTM C1063. The V-grooved self-furring plaster base is manufactured with evenly spaced indentations, 6” apart which run the length of the lath sheet holding the metal lath a consistent ¼” away from the surface to be plastered. Self-furring metal lath is available with or without a Grade D asphalt paper-backing, breather sheet.
Product Data & Ordering Information: Material: G-60 Galvanized Steel Packaged: 25 bundles or 250 pieces per pallet
Finish
Wt. per Sq Yd.
Sheet Size
Pcs./Bdl.
Yds./Bdl.
Yds./Pallet
Galv.
1.75 lbs.
27” x 96”
10
20
500
Galv.
2.5 lbs.
27” x 96”
10
20
500
Galv.
3.4 lbs.
27” x 96”
10
20
500
x Allows for complete embedment of plaster x No need to use furring nails
ASTM & Code Standards: x ASTM C1063, C841, C847, CE 240.01 and ML/SFA-920 x All Expanded Metal Lath is fabricated from prime galvanized steel, G60 zinc coating by the hot dipped method, conforming to Specification ASTM A-653/A-653M. x MSDS & Product Certification Information is available @ clarkwestern.com x For installation and placement instruction refer to ASTM C1063 and C841.
Storage: All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level platform, and protected from the weather and surface contamination. Per ASTM C-1063
Limitations: Galvanized steel products should not be used with magnesium oxychloride cement stucco or Portland cement stucco containing calcium chloride additives.
Related Products: x Diamond Mesh Self Furring Metal Lath x Diamond Mesh Grade D Asphalt Paper-Backed Diamond Mesh Metal Lath x 3/8” High Rib Metal Lath GREEN Benefits and Recycled Content: LEED Credit MR 2 - ClarkWestern products are manufactured from cold-formed steel. Steel is 100% recyclable, which helps divert debris from the waste stream. The contribution to LEED must be calculated by the contractor based on weight or volume. LEED Credit MR 4 - ClarkWestern's steel products have a minimum of 25.5% post-consumer recycled content, and 6.8% pre-consumer. If you wish to report a higher number for your project or seek Credit MR 5 please contact Tech Support at 888-437-3244 or visit www.clarkwestern.com.
Full sized lath panel
CW-Lath-SFVGL © 09/08 ClarkWestern Building Systems, Inc.
Project Information
Contractor Information
Architect Information
Name: Address:
Name: Contact: Phone: Fax:
Name: Contact: Phone: Fax:
CW Product Submittal Sheet Tech Support: 888-437-3244 Design Services: 877-832-3206
Sales: 800-543-7140 clarkwestern.com
09.22.36 (Metal Lath)
Paper-Backed Diamond Mesh Lath APB Metal Lath
A Galvanized Expanded Steel Plaster/Stucco Base A superior diamond mesh multi-purpose expanded steel base with an approved Grade-D Breather sheet spot attached. Application of asphalt paper-backed (APB) metal lath is used behind stone, traditional stucco and tile installations as a certified breather sheet and also aids in preventing loss of plaster when applying. It is an excellent base for spray on structural fireproofing, ornamental work, and under ceramic tile. It provides protection against wet areas during stucco curing. The asphalt paper-backed breather sheet meets Federal Specification UUB790A; Type 1, Grade D, Style 2 and is printed on the face of the paper for easy identification. APB is also available with Dimple and V-Groove self furring metal lath.
x Grade D paper available on Flat, Dimple & V-Groove Lath
Product Data & Ordering Information: Material: G-60 Galvanized Steel Packaged: 25 bundles or 250 pieces per pallet
Finish
Wt. per Sq Yd.
Sheet Size
Pcs./Bdl.
Yds./Bdl.
Yds./Pallet
Galv.
1.75 lbs.
27” x 96”
10
20
500
Galv.
2.5 lbs.
27” x 96”
10
20
500
Galv.
3.4 lbs.
27” x 96”
10
20
500
ASTM & Code Standards: x ASTM C1063, C841, C847, CE 240.01 and ML/SFA-920 x All Expanded Metal Lath is fabricated from prime galvanized steel, G60 zinc coating by the hot dipped method, conforming to Specification ASTM A-653/A-653M. x Asphalt paper-backed breather sheet meets Federal Specification UUB790A; Type 1, Grade D, Style 2. x MSDS & Product Certification Information is available @ clarkwestern.com x For installation and placement instructions refer to ASTM C1063, C841 and C926.
Storage: All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level platform, and protected from the weather and surface contamination. Per ASTM C-1063
Limitations: Galvanized steel products should not be used with magnesium oxychloride cement stucco or Portland cement stucco containing calcium chloride additives. GREEN Benefits and Recycled Content: LEED Credit MR 2 - ClarkWestern products are manufactured from cold-formed steel. Steel is 100% recyclable, which helps divert debris from the waste stream. The contribution to LEED must be calculated by the contractor based on weight or volume. LEED Credit MR 4 - ClarkWestern's steel products have a minimum of 25.5% post-consumer recycled content, and 6.8% pre-consumer. If you wish to report a higher number for your project or seek Credit MR 5 please contact Tech Support at 888-437-3244 or visit www.clarkwestern.com.
Full sized lath panel
CW-Lath-DML-APB © 09/08 ClarkWestern Building Systems,
Project Information
Contractor Information
Architect Information
Name: Address:
Name: Contact: Phone: Fax:
Name: Contact: Phone: Fax:
CW Product Submittal Sheet Tech Support: 888-437-3244 Design Services: 877-832-3206
Sales: 800-543-7140 clarkwestern.com
09.22.36 (Metal Lath)
Dimple SF Paper-Backed (APB) Lath APB Metal Lath
A Galvanized Expanded Steel Plaster/Stucco Base A self furring expanded dimpled metal lath with a Grade-D Breather sheet spot attached. The dimple self-furring plaster base is manufactured with evenly spaced indentations that holds 50% of the lath ¼” away from the solid surface. Application of asphalt paper-backed (APB) metal lath is used behind traditional stucco, stone and tile installations. Also provides protection against wet areas during stucco curing. The asphalt paper-backed breather sheet meets Federal Specification UUB790A; Type 1, Grade D, Style 2 and is printed on the face of the paper for easy identification.
Product Data & Ordering Information: Material: G-60 Galvanized Steel Packaged: 25 bundles or 250 pieces per pallet
Finish
Wt. per Sq Yd.
Sheet Size
Pcs./Bdl.
Yds./Bdl.
Yds./Pallet
Galv.
1.75 lbs.
27” x 96”
10
20
500
Galv.
2.5 lbs.
27” x 96”
10
20
500
Galv.
3.4 lbs.
27” x 96”
10
20
500
x Complete embedment of stucco or plaster x No need to use furring nails x Maintains consistent plaster depths
ASTM & Code Standards: x ASTM C1063, C841, C847, CE 240.01 and ML/SFA-920 x All Expanded Metal Lath is fabricated from prime galvanized steel, G60 zinc coating by the hot dipped method, conforming to Specification ASTM A-653/A-653M. x Asphalt paper-backed breather sheet meets Federal Specification UUB790A; Type 1, Grade D, Style 2. x MSDS & Product Certification Information is available @ clarkwestern.com x For installation and placement instructions refer to ASTM C1063, C841 and C926.
Storage: All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level platform, and protected from the weather and surface contamination, per ASTM C-1063
Limitations: Galvanized steel products should not be used with magnesium oxychloride cement stucco or Portland cement stucco containing calcium chloride additives.
GREEN Benefits and Recycled Content: LEED Credit MR 2 - ClarkWestern products are manufactured from cold-formed steel. Steel is 100% recyclable, which helps divert debris from the waste stream. The contribution to LEED must be calculated by the contractor based on weight or volume. LEED Credit MR 4 - ClarkWestern's steel products have a minimum of 25.5% post-consumer recycled content, and 6.8% pre-consumer. If you wish to report a higher number for your project or seek Credit MR 5 please contact Tech Support at 888-437-3244 or visit www.clarkwestern.com. CW-Lath-SFDL-APB © 09/08 ClarkWestern Building Systems,
Project Information
Contractor Information
Architect Information
Name: Address:
Name: Contact: Phone: Fax:
Name: Contact: Phone: Fax:
CW Product Submittal Sheet Tech Support: 888-437-3244 Design Services: 877-832-3206
Sales: 800-543-7140 clarkwestern.com
09.22.36 (Metal Lath)
V-Groove SF Paper-Backed (APB) Lath APB Metal Lath
A Galvanized Expanded Steel Plaster/Stucco Base A self furring expanded V-grooved metal lath with a Grade D Breather sheet spot attached. The V-groove self-furring plaster base is manufactured with evenly spaced indentations, 6” apart which run the length of the lath sheet holding 50% of the metal lath ¼” away from the solid surface Application of asphalt paper-backed (APB) metal lath is used behind traditional stucco, stone and tile installations. Also provides protection against wet areas during stucco curing. The asphalt paper-backed breather sheet meets Federal Specification UUB790A; Type 1, Grade D, Style 2 and is printed on the face of the paper for easy identification.
Product Data & Ordering Information: Material: G-60 Galvanized Steel Packaged: 25 bundles or 250 pieces per pallet
Finish
Wt. per Sq Yd.
Sheet Size
Pcs./Bdl.
Yds./Bdl.
Yds./Pallet
Galv.
1.75 lbs.
27” x 96”
10
20
500
Galv.
2.5 lbs.
27” x 96”
10
20
500
Galv.
3.4 lbs.
27” x 96”
10
20
500
ASTM & Code Standards: x ASTM C1063, C841, C847, CE 240.01 and ML/SFA-920 x All Expanded Metal Lath is fabricated from prime galvanized steel, G60 zinc coating by the hot dipped method, conforming to Specification ASTM A-653/A-653M. x Asphalt paper-backed breather sheet meets Federal Specification UUB790A; Type 1, Grade D, Style 2. x MSDS & Product Certification Information is available @ clarkwestern.com x For installation and placement instructions refer to ASTM C1063, C841 and C926.
Storage: All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level platform, and protected from the weather and surface contamination. Per ASTM C-1063
Limitations: Galvanized steel products should not be used with magnesium oxychloride cement stucco or Porland cement stucco containing calcium chloride additives.
GREEN Benefits and Recycled Content: LEED Credit MR 2 - ClarkWestern products are manufactured from cold-formed steel. Steel is 100% recyclable, which helps divert debris from the waste stream. The contribution to LEED must be calculated by the contractor based on weight or volume. LEED Credit MR 4 - ClarkWestern's steel products have a minimum of 25.5% post-consumer recycled content, and 6.8% pre-consumer. If you wish to report a higher number for your project or seek Credit MR 5 please contact Tech Support at 888-437-3244 or visit www.clarkwestern.com. CW-Lath-SFVGL-APB © 09/08 ClarkWestern Building Systems,
Project Information
Contractor Information
Architect Information
Name: Address:
Name: Contact: Phone: Fax:
Name: Contact: Phone: Fax:
CW Product Submittal Sheet Tech Support: 888-437-3244 Design Services: 877-832-3206
Sales: 800-543-7140 clarkwestern.com
09.22.36 (Metal Lath)
3/8” High-Rib Metal Lath
Metal Lath
A Galvanized Expanded Steel Plaster/Stucco Base A High-Rib Metal Lath with a herringbone mesh pattern and seven deep longitudinal solid steel ribs providing superior strength and exceptional rigidity. The heavy ribs enable use on ceiling or wall spans at 24” compliant to Table 3 of ASTM C1063. This excellent product is also used on 2” stud-less partitions and as reinforcement for concrete floor and roof slabs.
Product Data & Ordering Information: Material: G-60 Galvanized Steel Packaged: 50 bundles or 500 pieces per pallet
Finish
Wt. per Sq Yd.
Sheet Size
Pcs./Bdl.
Yds./Bdl.
Yds./Pallet
Galv.
3.4 lbs.
27” x 96”
10
20
1000
ASTM & Code Standards: x ASTM C1063, C841, C847, CE 240.01 and ML/SFA-920 x All Expanded Metal Lath is fabricated from prime galvanized steel, G60 zinc coating by the hot dipped method, conforming to Specification ASTM A-653/A-653M. x MSDS & Product Certification Information is available @ clarkwestern.com x For installation and placement instructions refer to ASTM C1063, C841 and C926.
Storage: All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level platform, and protected from the weather and surface contamination per ASTM C-1063
Limitations: Galvanized steel products should not be used with magnesium oxychloride cement stucco or Portland cement stucco containing calcium chloride additives.
Related Products: x Diamond Mesh Self Furring Metal Lath x Diamond Mesh Self Furring (APB) Asphalt Paper-backed Metal Lath
Full sized lath panel GREEN Benefits and Recycled Content: LEED Credit MR 2 - ClarkWestern products are manufactured from cold-formed steel. Steel is 100% recyclable, which helps divert debris from the waste stream. The contribution to LEED must be calculated by the contractor based on weight or volume. LEED Credit MR 4 - ClarkWestern's steel products have a minimum of 25.5% post-consumer recycled content, and 6.8% pre-consumer. If you wish to report a higher number for your project or seek Credit MR 5 please contact Tech Support at 888-437-3244 or visit www.clarkwestern.com. CW-Lath-375Rib © 09/08 ClarkWestern Building Systems, Inc.
Project Information
Contractor Information
Architect Information
Name: Address:
Name: Contact: Phone: Fax:
Name: Contact: Phone: Fax:
CW Product Submittal Sheet Tech Support: 888-437-3244 Design Services: 877-832-3206
Sales: 800-543-7140 clarkwestern.com
09.22.36 (Metal Lath)
3/8” Spray-Rib Lath
Metal Lath
A Galvanized Expanded Steel Plaster/Stucco Base A herringbone mesh pattern with seven deep longitudinal solid steel ribs with 3-3/16” wide strips of plain 50lb Kraft paper spot attached with glue between Ribs. Spray Rib-Lath provides the superior strength and exceptional rigidity of regular 3.4 high rib lath while the addition of the strips of Kraft paper limits the loss of plaster when used over open framing or when machine applied. Spray-Rib lath is not a replacement for Grade-D breather sheet moisture retardant paper. (Available West Coast Only)
Product Data & Ordering Information: Material: G-60 Galvanized Steel Packaged: 25 bundles or 250 pieces per pallet
Finish
Wt. per Sq Yd.
Sheet Size
Pcs./Bdl.
Yds./Bdl.
Yds./Pallet
Galv.
3.4 lbs.
27” x 96”
10
20
1000
ASTM & Code Standards: x ASTM C1063, C841, C847, CE 240.01 and ML/SFA-920 x All Expanded Metal Lath is fabricated from prime galvanized steel, G60 zinc coating by the hot dipped method, conforming to Specification ASTM A-653/A-653M. x MSDS & Product Certification Information is available @ clarkwestern.com x For installation and placement instructions refer to ASTM C1063, C841 and C926.
Storage: All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level platform, and protected from the weather and surface contamination per ASTM C-1063
Limitations: Galvanized steel products should not be used with magnesium oxychloride cement stucco or Portland cement stucco containing calcium chloride additives.
Related Products: x Diamond Mesh Metal Lath x Diamond Mesh Self Furring Metal Lath x 3/8” High Rib Metal Lath
GREEN Benefits and Recycled Content: LEED Credit MR 2 - ClarkWestern products are manufactured from cold-formed steel. Steel is 100% recyclable, which helps divert debris from the waste stream. The contribution to LEED must be calculated by the contractor based on weight or volume. LEED Credit MR 4 - ClarkWestern's steel products have a minimum of 25.5% post-consumer recycled content, and 6.8% pre-consumer. If you wish to report a higher number for your project or seek Credit MR 5 please contact Tech Support at 888-437-3244 or visit www.clarkwestern.com. CW-Lath-375SprayHigh-Rib © 09/08 ClarkWestern Building Systems, Inc.
Project Information
Contractor Information
Architect Information
Name: Address:
Name: Contact: Phone: Fax:
Name: Contact: Phone: Fax:
