(800) 872-2511

E132/2017

The #1 Quality Router Bit Made In The USA!

Oscillating Spindle and Belt Sander NEW! One benchtop sander with two functions.

P. 79

Set-up as belt sander

WINTER

SALE

Set-up as spindle sander

See “Winter Sale” throughout catalog

Fast Joint Includes a Step-by-Step Instruction Booklet

n li n

e

o

ide

v

Use a router table and interchangeable templates. Create 20 unique joints! SAVE $61! Create exciting custom joinery with this unique jointing system. Matching templates make cutting joints simple and precise. Insert your bit in the router, insert a guide bushing into your router table insert, set your router bit height, and you're ready to go! Set male and female templates on opposite sides of the jig platform and start cutting. For stock ¼" to ¾" thick (¼" to ⅜" for thru dovetails) and up to 14" wide. The four template system will get you started with Heart, Half-Blind Dovetail, Through Dovetail and Key templates. You can also expand your joint library and choose our 11 or 20 template systems, with up to 16 additional decorative and interesting joint profiles that “spice up” the standard joint. For table mounted routers that accept template guide bushings only. Not compatible with Ryobi or Bosch router tables.

o

Fast Joint Precision Joinery System

PLATE NOT INCLUDED

11 Template Fast Joint System “B” SAVE $40! Includes the Fast Joint Jig 4 template set

FREE! Toy Chest plans @ EagleAmerica.com Each Fast Joint System • One 14˚ CT Dovetail router bit includes: • One spring lock washer • Three toggle clamps for bushing • One Fast Joint • One standard .308" OD Aluminum Jig platform bushing with necessary hardware • One tighter fit .311" OD • Two spring clamps bushing (cont.) • One 3/16" HSS spiral • One dovetail 7/16" OD upcut router bit bushing • One 5mm HSS Spiral • One brass centering pin upcut router bit • One ⅜" x ⅜" brass set-up bar

4 Template Fast Joint System “A” SAVE $61! Includes the Fast Joint Jig and all hardware

listed above, plus: Heart, Half-Blind Dovetail, Key, and 14˚ Thru Dovetail templates. If Sep $230.99 $169.99

415-9411

Heart Key

Through Dovetail Half-Blind Dovetal

(415-9411) plus: Heart Wave, Large Key, Lock, Wave, Lollipop, Arrowhead, and Teddy Bear templates. 415-9422 If Sep $309.99 $269.99 Heart Wave

Lollipop

Large Key

Arrowhead

Lock

20 Template Fast Joint System “C” SAVE $97! Includes Fast Joint Jig (415-9422) plus:

Kings Crown, Top Hat, Bread Box, Hexagon, Wide Arrowhead, Butterfly, Dog Bone, Birds Eye, and 8˚ Through Dovetail templates. 415-9404 If Sep $516.99 $419.99 Kings Crown Top Hat Bread Box

For individual templates go to EagleAmerica.com 2

Teddy Bear

Wave

Hexagon

Wide Arrowhead Butterfly Dog Bone Birds Eye 8º Through Dovetail

See the Eagle America® order form and shipping information on page 81

Picture Framing Magazine.” permission of November 2013 review “Reprinted with pass–in all one in e cutting the full profil True one-pass frame profiles including some prone to nal Making your own frames adds a perso or touch to a prized photo, painting, child's drawing, and Eagle America’s to picture frame router bits make it easy create eye-catching profiles in one pass a on your router table. No need to use ve variety of different-shaped bits to achie the five profiles shown here. And to top it off, these U.S. -made bits cut cleanly–

B

n li n

e

o

E

species I tried, tear-out (figured maple, red oak, and cut hickory). After routing the profile, you a rabbet on the back for the picture and as glass. The five profile bits shown come a set, or sell for $40-$45 apiece.

o

v

ide

SALE $209.99!

A C

SAVE $38.75

Picture Frame “Clamp & Frame” Kits

D

These combo sets include a 5 piece Picture Frame Value Set (¼" or ½" shank), and a Merle Band Clamp (P. 70).

Picture Frame and Mirror Bits

Make beautiful picture and mirror frames as well as chair rails and A window sill casings. All bits two flute, carbide tipped with bearing guides. All ¾" L diameter.

The ¼" shank combo kit includes: Picture Frame Value Set, Merle Clamp, and Hang-O-Matic 199-1653 If Sep $248.74 $209.99 The ½" shank combo kit includes: Picture Frame Value Set, Merle Clamp, and Hang-O-Matic 199-1656 If Sep $248.74 $209.99

B

Miller Stepped Rabbet Bit A framer’s dream come true!

C

D

E

L Shank A 13⁄16” ¼” 165-0102 $44.95 — — A 13⁄16” ½” 165-0105 44.95 — — B ¾” ¼” 165-0202 39.95 — — B ¾” ½” 165-0205 39.95 — — C 17⁄16” ¼” 165-0302 44.95 — — C 17⁄16” ½” 165-0305 44.95 P14-3524 $29.95 D 1” ¼” 165-0402 43.95 — — D 1” ½” 165-0405 43.95 P14-3522 27.95 E 13⁄16” ¼” 165-0502 44.95 P14-3543 29.95 E 13⁄16” ½” 165-0505 44.95 — — Save! 5-Piece Picture Frame Value Sets Include all profiles, A to E. ¼” Shank 199-1652 If Sep. $218.75 $189.99 ½” Shank 199-1655 If Sep. 218.75 189.99

Put a double rabbet on the back of a mirror or large frame. Stepped rabbet bits put both a 3⁄8" x 1⁄8" or ¼" ledge for glass or mirror plus an additional 3⁄8" by up to 11⁄32" ledge for backing masonite or wood in just one pass! Two flute, carbide tipped with ball bearing guide, ½" shank.

A

For 1⁄8” Thick Glass/Mirror

B

17/8” 11/32” L

For ¼” Thick Glass/Mirror



L

3/8” 3/8”

OAL

A 1⁄8” 2½” 150-1505 $54.95 P14-2720 $28.95 B ¼” 25⁄8” 150-1515 56.95 P14-2721 29.95

www.EagleAmerica.com / 1-800-872-2511

3

Router Bits Boxed 70 Piece Master Router Bit Sets



24 Piece Router Bit Set

#1 Quality - American Made!

SAVE $234! FREE

35 Pc. Router Bit Survival Kit (P. 41)

WINTER

SALE

SAVE $109! FREE Brass Setup Bar Set (P. 50),

and Collet Extension (P. 45), with ½" shank set.

Ends 2/28/17. All bits are carbide tipped with anti-kickback design. Wood storage box can be wall mounted. • 7 Standard Straights: ¼", • 2 Keyhole/Picture Hanging: 3⁄8", ½" 5⁄16", 3⁄8", 7⁄16", ½", ¾", 1" • 3 Plywood Dado • 1 Combination Bowl, Straights: 7⁄32", 31⁄64", 23⁄32" Tray & Dish: ¾" • 6 Roundovers: 1⁄8", 3⁄16", • 1 Point Cutting ¼", 5⁄16", 3⁄8", ½" R Roundover: ¼"R • 6 Coves: 1⁄8", 3⁄16", ¼", 5⁄16", • 1 Combination Panel 3⁄8", ½" R Pilot: 3⁄8" • 6 Dovetails: 7°x 5⁄8", 7½°x • 1 Plunge Cove and Bead: ¼", 9°x 3⁄8", 14°x ½", 5⁄8", ¾" 1⁄8"R • 5 V-Grooves: 60° x ½", • 1 French Table Edge: 90° x 3⁄8", ½", 5⁄8", ¾" 5⁄16" R • 4 Chamfering: 15°, 22½°, • 1 Plunge Roundover: ¼" R 30°, 45° • 1 Double Round: 5⁄32" R • 4 Round Nose: ¼", 3⁄8", • 1 Classic Pattern: 5⁄32" R ½", ¾" • 1 Cove and Bead: 5⁄32" R • 2 Slot Cutter Assemblies, • 1 Bottom Cleaning: 1" 3-Wing: 1⁄8", ¼" • 1 Ogee Fillet: 3⁄16" R • 2 Square Edge Beads: • 1 Rabbeting: ½" ¼", 3⁄8" • 2 Roman Ogees: 5⁄32", ¼"R • 1 Triple Bead: ¼" • 1 Face Frame: ½" • 2 Flush Trims: 3⁄8", ½" • 1 Lettering: 60°- 1" • 2 Bevel Trims: 7°, 15° • 2 Hinge Straights: ½", 5⁄8" • Wood Storage Case

70 Piece Set SALE!

400-3025 - ½" Shank Set includes 2½" Brass Setup Bar Set (P. 50), and Router Collet Extension (P. 45). List $333.97 $224.99 P19-7001 - ¼" Shank Set Reg. $289.99 $224.99

4

WINTER

SALE

An outstanding selection based upon the most requested Eagle bits! This ½" shank set is an economical way to buy the finest router bits in the world. With storage case. USA Includes: • 5 Standard Straights: ¼", ⅜", ½", ¾", 1" • 5 Roundover: ⅛", 3⁄16", ¼", ⅜", ½" R • 3 Plywood Dados: 7⁄32", 31⁄64", 23⁄32" • 2 Round Nose: ⅜", ½" • 2 Cove: ⅜", ½" R • 1 Roman Ogee: 5⁄32" R

• 1 Keyhole/Picture Hanging: ⅜" • 1 Chamfering: 45° x ⅝" • 1 Rabbeting: ½" x ½" • 1 Flush Trim: ½" x 1" • 1 V-Groove: 90° x ½" • 1 Dovetail: 14° x ½"

24 Piece Set with FREE 35 Pc. Router Bit Survival Kit

100-2502 ½” Shank List $634 $399.99

Superior Solid Carbide Flush Trim Router Bits

These ½" shank bits are the ultimate template routing solution. Rout in any direction smoothly and tearout-free, thanks to the compression spiral and ball B C bearing design. A Ideal for following a template or when using a router to flush trim matching wood surfaces. The bits work great in a router to produce smoothly trimmed edges. Originally created for CNC routers, these bits bring topquality, industrial grade performance to your own shop. Bits have a 7/8" large diameter and 11/8" cutting length. USA A Flush Trim Bottom Bearing 117-0606 $139.99 B Pattern/Plunge Trim Top Bearing 117-0607 149.99 C Combination Trim Top & Bottom 117-0605 149.99

The PowerLift will change the way you work on the router table.

New! PowerLift Pro®

PowerLift Pro® Router Lift 415-6200 $499.95 PowerLift Pro® plus a 7" Android Tablet

computer controlled router lift.

Works mechanically with a foot pedal, and/or digitally with an Android app The MLCS motorized, heavy duty PowerLift Pro® handles the biggest router motors and router bits! For home use or the shop professional. This is the only router lift sold with a "hands free" Foot Pedal and the FREE MLCS Android App.

• The optional MLCS 7" Android Tablet comes with the PowerLift App pre-installed, but the FREE App can be run from almost any Android device including phones. • The lift can also be run mechanically, without the APP, by using the bi-directional foot pedal. • Memory Positions with Advance Pass Control moves the lift up or down, and stops it automatically at up to SIX preset user selected router bit locations. • Start by raising the top of the bit flush with the table top, then hit "Set Zero" in the app. This provides precise movement within .001". • Use the Foot Pedal to cycle through Advanced Pass Control stored positions for hands free incremental passes. Perfect for mortising! • Preset Movements are preprogrammed by MLCS. Common movements like Max Up and Down, 1/100", 1/64", 1/32", 1/16", 1/8", 1/4" and 1/2" can be selected • The PowerLift Pro® is designed to handle large 31/4 HP 4.2" diameter router motors, but reducer sleeves are available for the most common 3.25" and 3.5" diameter motors • "Max Up" provides over 3" of travel for quick, "above the table" router bit changes • The PowerLift Pro® will fit any MLCS router table with a plate, including: the MLCS Router Table Top and Extension Tops (P. 42), Phenolic Table (P. 44), and Bench Top Table and CastIron Top (P. 45). • The App Speed Control adjusts lift rate. • A heavy duty mounting arm is included to give you the option of mounting your Android device to the router table. • The PowerLift Pro® has sealed bearings with heavy duty steel guide posts. • The plate is 91/32" x 123/32" x 3/8" aluminum and can accept router bits up to 3.5" in diameter. Includes a self-locking reducer ring with a 2" opening, and additional rings are on P. 47 (415-6559).

with the PowerLift Pro App pre-installed 415-6205 $534.95

Accessories: MLCS 7" Android Tablet with PowerLift Pro® App pre-installed. More information online. 415-6201 $49.95 Insert Ring 4 pieces kit 415-6559 $19.95 Replacement Insert Ring Wrench 415-6560 $9.95 Reducer Sleeves for 3.5" diameter motor 415-6555 $27.95 Reducer Sleeves for 3.25" dia. motor 415-6556 $29.95

PowerLift Pro includes: • Foot Switch • Insert Ring with 2” hole • Insert Ring Wrench • Starter Pin • (3) Allen Wrenches • (4) Plate Leveling Screws • Power Supply Cord • USB cable w/ mini USB adapter • Mounting Arm

PowerLiftPro® 3¼ hp Variable Speed Router Motor SAVE $50! BIG 4.2" diameter motor!

Heavy Duty 15 Amp motor handles the largest router bits on the market. Cutting with a 3½" diameter raised panel bit is no problem! The variable speed range is 10,000 to 22,000 RPM, so no external speed control is needed and it will handle all of your routing operations. Included with the motor are ¼" and ½" collets plus 2 collet wrenches. SALE! 415-6561 Reg. $269.95 $219.95

www.EagleAmerica.com / 1-800-872-2511

5

Door Construction

Now a proud distributor of MLCS Router Bits, a provider of quality router bits for 30 years!

Stile and Rail Bit 2-Piece Sets

Making beautiful cabinet doors is easy! For 11⁄16" to 7⁄8" thick stock NEW Mission Style! Make square edge or arch cathedral pattern doors without the need for a fence. Bits can be converted to make beautiful glass door or picture frames from 5⁄8" to 1" thick without the need for additional cutters. Flip stock over to create up to 13⁄8" double passage interior doors. 15/8" Use in router table only. All bits are two 1" ¼" flute, carbide ¼" tipped, with ball bearing guides and cut a standard ¼" x 3⁄8" thick tongue. ½" shank. Instructions included. For easy set-up, order our Kwik Blocks.

A

B

Traditional Ogee

Roman Ogee

C

D

Double Round

Cove and Bead

E

15/8"

F

Round

Bead

H

G 3/8"

15° Shaker Bevel

Bevel

I

J

Miniature Stile and Rail Bit Sets

For 3⁄8" to ¾" stock. Make doors as small as 2" square. Panel groove measures 5⁄32" thick by ¼" deep. ½" shank, two flute and carbide tipped with ball bearing guides.

M

L

Miniature Roman Ogee

Miniature Round

K

Cove

Southwestern

Don’t Forget Kwik Blocks!

Mission Style

Mini

Full Size

Order Kwik Order Kwik Profile Reg. Block Set # Block Set # A Roman Ogee 185-0700 $109.95 486-1857 $10.99 P15-3820 $69.95 486-1825 $10.99 A Roman Ogee * 185-0725 119.95 486-1857 10.99 — — — — B Traditional Ogee 185-0300 109.95 486-1853 10.99 P15-3818 69.95 486-1823 10.99 C Cove & Bead 185-0200 109.95 486-1852 10.99 — — — — D Double Round 185-1000 149.95 486-1862 10.99 P15-3842 69.95 486-1829 10.99 E Round 185-0800 109.95 486-1858 10.99 P15-3821 69.95 486-1826 10.99 E Round *185-0825 119.95 486-1858 10.99 — — — — F Bead 185-0900 109.95 486-1859 10.99 P15-3822 69.95 486-1827 10.99 G Bevel 185-0400 109.95 486-1854 10.99 — — — — H 15° Shaker Bevel 185-0500 139.95 486-1861 10.99 P15-3841 69.95 486-1861 10.99 H 15° Shaker Bevel *185-0525 149.95 486-1861 10.99 — — — — I Cove 185-0600 124.95 486-1831 10.99 — — — — J Southwestern 185-1100 134.95 486-1830 10.99 — — — — K Mission Style NEW! — — — — P15-3844 69.95 — — L Mini Roman Ogee 185-0710 139.95 486-1851 10.99 P15-3823 69.95 486-1851 10.99 M Mini Round 185-0810 139.95 486-1850 10.99 P15-3824 69.95 486-1850 10 .99 * = Plywood Stile and Rail Sets, ready to use sets for ¼” flat plywood panels (7⁄32” or 5.5 mm). Conversion kit not required.

Mitered “Door” Frame Bits Create a dramatic door or mirror frame without complicated joinery!

6

See P. 20

Door Construction • Sled is 6½" x 16" x 3/8"

2-Piece Matched Stile and Rail Entry Door Sets

(thick) and holds stock up to 4¾" wide. “Deluxe” Professional • The 500 lb. capacity hold Coping Sled

For 13⁄8" to 1¾" interior or exterior doors Each set includes both ¼" and ½" slot cutters and 17/8” spacer for making either ¼” ¼" or ½" thick tongues. All bits are two flute, carbide tipped, and ½" shank.

A

B

Roundover

SALE

C 13/8” to 13/4”

Ogee Bead

down clamp has heavy Make every cut perfect! duty adjustable dual pad SAVE $10! Ends 2/28/17. hold downs for maximum Make difficult small or strength and rigidity. narrow cross-grain rail • With dual adjustable fences cuts. Align your material and clear base flush with the outside WINTER edge of the sled and clamp into place with the 500 lb. holding clamp. Non-slip abrasive strips firmly holds the piece in place. Run the sled along the fence until you cut into the replaceable backer block, (eliminating tear out). No need to make the router table fence and mitre slot parallel. Replaceable “backer block” allows use of multiple profiles. Re-position sled handle using predrilled mounting holes on opposite side of base (for shaper and reverse feed operations). Professional “Deluxe” Coping Sled 400-1020 $69.95 Replacement Backer Guide Block 400-1025 24.95

Ogee

Sale A Roundover P15-3701 $189.99 $159.95 B Ogee Bead P15-3700 189.99 159.95 C Ogee P15-3702 189.99 159.95

6 Piece Raised Panel Door - Cabinet Sets

SAVE $55! Each set includes

Combination Arched WINTER Door Template Sets SAVE $10! Ends 2/28/17. Door

½" shank, carbide tipped 3-wing Raised Panel, Stile and Rail set, Glue Joint, drawer Lock, Drawer Pull bits, and a FREE 100 piece bag of space balls. USA

SALE

Includes SIX router bits: Ogee Bead Raised Panel, Roman Ogee Stile and Rail Set, Glue Joint, Drawer Lock and Drawer Pull bits 199-1861 If Sep $379.75 Set $324.99 Includes SIX router bits: Cove Raised Panel, Round Stile and Rail Set, Glue Joint, Drawer Lock and Drawer Pull bits 199-1862 If Sep $379.75 Set $324.99

3 Piece Raised Panel Door Sets

SAVE $20! Each set includes ½" shank, carbide tipped

3-wing Raised Panel bit and Stile & Rail set. USA Includes Ogee Bead Raised Panel bit, Roman Ogee Stile and Rail Set 199-1871 If Sep $219.90 Set $199.99 Includes Cove Raised Panel bit and Round Stile and Rail Set 199-1872 If Sep $219.90 Set $199.99

See Rail & Stile bits on P. 6 and Raised Panel bits on P. 8

Curved Top Only

templates feature both matching rail and panel patterns on the same template. Make 3 types of elegant looking curved doors: doors with curved tops Curved Top & Bottom only, doors with curved tops and bottoms, and doors with half curves. Made from ¼" thick, shatter resistant durable plastic. Guaranteed not to chip, crack, absorb Half Curve moisture or warp. 10-piece Template Sets (Provincial Only) make 10 different A Cathedral Set 401-1202 $59.99 cabinet door sizes from B Country Set 401-1402 59.99 9½" to over 22" in C Provincial Set 401-1502 59.99 width. Instructions D Roman Set 401-1102 59.99 included. USA E Sunset Set 401-1302 59.99

A Cathedral

B

C

D

E

Country

Provincial

Roman

Sunset

Eliminate Panel Movement

Prevent panel cracking and rattle due to expansion Space Balls (A) fill the gap neatly. Place two or three balls in each channel before inserting panel. Balls measure .26" and are made of synthetic rubber. Door Construction Tape (B) A Bag of 100 447-7170 $5.99 is a special self-adhesive foam tape that fits into A Bag of 1,000 447-7171 44.99 channel before assembling your doors. Each B 20 Foot 447-7160 5.99 roll is .24" wide x 1⁄8" thick. USA B 100 Foot 447-7161 23.99

A

B

www.EagleAmerica.com / 1-800-872-2511

7

Now a proud distributor of MLCS Router Bits, a provider of quality router bits for 30 years!

Door Construction Large Safety Raised Panel Bits

o

Note: Use in router table only. All bits carbide tipped and ½" shank.



o

v

Note: Beige area on illustrations denote what you loose with 5⁄8" material or use with Back Cutter.

e

For use with 5⁄8" to 1" material. They also make great drawer fronts! 2 wing and 3 wing horizontal bits. Designed for straight as well as arch pattern and cathedral doors. n li n These bits can also be used to make attractive drawer fronts. Ball ide bearing guide allows you to follow pattern. These carbide tipped bits feature anti-kickback design with bearing guides. Minimum 2 hp variable speed router recommended. Do not exceed 12,000 RPM. Multiple light passes required. Raised panel bits with backcutter. Use for 5⁄8" to 1" stock. Bit includes a 3⁄8" radius back cutter for milling both sides of the panel in the same cut while producing a perfect ¼" spaced tongue. The 2-wing panel raisers feature a 2-wing back cutter whereas 2-Wing the 3-wing panel raisers come with a 3-wing back cutter. All bits carbide tipped, anti-kickback design, bearing guides and ½" shank. Vertical raised panel bits. For straight and square panels only. Raising or lowering the bit in your router can adjust the profile from 1" to 1½" of reveal for 5⁄8" to ¾" stock. Overall length 3". Great with the Horizontal Router Table on page 85.

3-Wing with Backcutter

3-Wing Vertical

B B

3/4” ½”

5/8”

C

¼” ¼”

Ogee

3/8”

Ogee w/Backcutter

Round Ogee

Ogee Bead

Cove

Classic Ogee

Bevel

Rounded Bevel

Vertical

C

2-Wing 2-Wing w/Backcutter 3-Wing 3-Wing w/Backcutter

B =½” See website B =½” B =½” See website See website B =5⁄8” See website C =1½” C =1½” C =13⁄8” C =1¼” C =17⁄16” for router bit for router bit for router bit C =17⁄16” for router bit specifications Dia.=3¼” specifications Dia.=33⁄8” specifications Dia.=33⁄8” specifications Dia.=1” Dia.=1” Dia.=3¼” Ogee — P15-3917 186-5275 P15-3924 186-5775 P15-3938 186-5875 P15-3941 186-6075 — Round Ogee 186-4735 — 186-5215 P15-3928 186-5715 — 186-5815 — 186-6015 — Ogee Bead 186-4745 P15-3916 186-5225 P15-3920 — — 186-5825 — 186-6025 — Cove 186-4705 P15-3913 186-5205 — 186-5705 P15-3937 186-5805 P15-3940 186-6005 P15-3960 Classic Ogee — — 186-5265 — — — 186-5865 — 186-6065 P15-3963 Bevel 186-4765 P15-3915 186-5235 P15-3921 186-5735 P15-3936 186-5835 P15-3944 186-6035 P15-3964 Rounded Bevel 186-4715 — 186-5245 — — — 186-5845 — 186-6045 — Your Your Your Your Your Your Your Your Your Your Choice Choice Choice Choice Choice Choice Choice Choice Choice Choice $59.95 $29.95 $99.95 $39.95 $119.95 $53.95 $109.95 $46.95 $139.95 $69.00

3-Wing Back Cutter Assembly

Puts 1⁄8" radius on the backsides of panel tongues. Includes ½" arbor and 1/8” bearing. Carbide tipped. ½" shank. USA

8

2” 9/16”

1/8” Radius

146-8615 $44.95

Door Construction Raised Panel Bits

Use our bits to make square or arch door patterns. Panel raisers are manufactured with a shear angle to produce optimum cuts both with and across the grain. Bits can also be used to make attractive drawer fronts, table tops, plaques and moldings. All bits two flute, carbide tipped, with bearing guides.

Shaker Style Panel Raiser Bits

Mini: for 3⁄8" to ¾" Stock Overall Length = 2¼" Profile Reveal = 5⁄8" Shank = ½"

7/16” 5/8”

A Ogee

13/4”

Mount raised panel to the interior or exterior face as shown. To reduce cutting depth “C”, use a larger bearing. Two flute, carbide tipped with ball bearing guide, ½" shank. D

A 186-2815 $44.95 B 186-2805 44.95

B Cove

L

B

C

Small: for 5⁄8" to ¾" Stock Overall Length = 27⁄16" Profile Reveal = 13⁄16" Shank = ½"

2”

13/16”

A Ogee B Cove

C Bevel



L Profile A Ogee ½” P15-3905 $27.95 B Cove 7⁄16” P15-3900 25.95 C Bevel ½” — —

Medium: for 5⁄8" to ¾" Stock

Overall Length = 2½" Profile Reveal = 1" L Shank = ½" *Overall length of P15-3912 is 2¾". Note: Beige area on illustrations denotes what is lost with 5⁄8" material or use with backcutter.

D Straight 25° L A 5⁄8” B 5⁄8” C 5⁄8” D 5⁄8” E ½”



B



C

L





Complete 3-Piece Shaker Door Value Sets Include: Shaker Style Panel Raiser Bit (your choice A, B, or C from above); plus 2-Piece Shaker Stile and Rail Set (#185-0500 or #P15-3841, page 6); and Kwik Block Set.

A 15°

1”

5/8”

C Classic Ogee

E Cove

D

A 2” 1⁄8” 5⁄8” 9⁄16” 186-2925 $59.95 — — B 2” ¼” ½” ½” 186-2905 59.95 P15-3911 $30.95 C 2¾” 5⁄8” ½” 5⁄8” 186-2915 64.95 P15-3909 39.95

B 22½°

C 45°

If Sep. Value Set A 199-8640 $209.89 $179.99 B 199-8641 209.89 179.99 C 199-8642 214.89 184.99 B P19-3839 111.89 74.95 C P19-3840 120.89 79.95 3/4”

B Ogee Bead



C 45°

2½”

1”

A Ogee

B 22½°

A 15°

L

186-4015 $64.95 P15-3912* $39.95 186-4075 64.95 P15-3910 39.95 186-4065 64.95 — — 186-4035 64.95 — — 186-4005 64.95 — —

2-Piece Mission Stile & Rail Set Exclusive 3 Wing design! For 5⁄8" - ¾" thick stock. Mission furniture originated in late 1900's California and remains a popular style today. Flat 7⁄32" (5.5mm) plywood panels fit perfectly in the groove. Carbide tipped, ½" shank. See web for value sets. See page 6 for ¼" x 3/8" thick tongue set.



185-0535 $99.95 P15-3843 $69.95

www.EagleAmerica.com / 1-800-872-2511

9

Door Construction

Now a proud distributor of MLCS Router Bits, a provider of quality router bits for 30 years!

Combination Door Edge, Drawer Front, Table Top and Lid Profiles

Specially designed to accommodate European door hinges These profiles also make beautiful table top edges and drawer fronts. All bits are two flute, carbide tipped with bearing guides.

D

A

B

L C

D

C

E

✓ VALUE SET!

✓ VALUE SET! G

F

✓ VALUE SET! I

H

✓ VALUE SET!

J

K

L

M

N

O

C L Shank D — — A 13⁄16” 5⁄16” 3⁄8” ¼” 180-3102 $36.95 A 13⁄16” 5⁄16” 3⁄8” ½” 180-3105 36.95 — — B 2½” 7⁄16” 3⁄8” ½” 174-2015 39.95 P14-3496 $20.00 C 13⁄8” 7⁄16” 3⁄8” ¼” 174-2002 37.95 — — C 13⁄8” 7⁄16” 3⁄8” ½” 174-2005 37.95 P14-3547 20.00 D 1¾” 5⁄8” 3⁄8” ½” 180-3215 41.95 P14-3708 20.00 E 1¾” 5⁄8” 3⁄8” ½” 180-3265 41.95 P14-3713 20.00 F 19⁄16” 17⁄32” 7⁄16” ½” 180-3205 39.95 — — G 1½” ½” 7⁄16” ¼” 180-3212 39.95 — — H 11⁄8” 5⁄16” 3⁄8” ¼” 180-3272 39.95 — — I 1¾” 5⁄8” 3⁄8” ½” 180-3255 41.95 — — J 1¾” 5⁄8” 7⁄16” ½” 180-3325 41.95 — — K 1¾” 5⁄8” 3⁄8” ½” 180-3225 41.95 P14-3711 20.00 L 1¾” 5⁄8” 3⁄8” ½” 180-3235 41.95 — — M 1¾” 5⁄8” 7⁄16” ½” 180-3295 41.95 P14-3725 20.00 — — N 1¾” 5⁄8” 7⁄16” ½” 180-3365 41.95 O 1¾” 5⁄8” 7⁄16” ½” 180-3385 41.95 — — 4-Piece Value Sets ½” Shank. Include: C, D, E and F 199-1815 If Sep. $163.80 Set $134.99

✓

Door and Drawer Pulls

Profiles B, and C, are reversible designs, use them in either direction and still have a functional finger grip. Adjust cutter heights for desired upper bead reveal. All bits two flute, carbide tipped. ½" shank. More door and drawer pulls at www.EagleAmerica.com. Accepts Cup Hinges!

Accepts Cup Hinges!

B

A



C With Bearing

10

D

C

L

A 1½” ½” 7⁄8” 180-2825 $54.95 P14-3714 $29.95 B 15⁄8” 9⁄16” 7⁄8” 180-2805 57.95 — — C ¾” 3⁄16” 7⁄8” 181-1205 52.95 — — With Bearing

C ¾” 3⁄16” 7⁄8” 181-1205B 66.95

—

—

Window and Door Trim Muntin / Mullion Cutters

Matching Divided Glass Door Set See the light!

A

B

Matched ➡Set

➡

D

R

½”

½” 5/16”

C C

D

C ½” C D

The three piece set consists of a specially designed 5⁄16" radius beading bit (A) for the stile profiles, special 5⁄16" radius cove cutter (B) for making the matching rails, and a standard 3⁄8" rabbet bit (C) for cutting the glass recess. Bearing guides allow you to make arched or curved doors. Make the end cuts (rails) first, then the stiles and finally the rabbets. All bits ½" shank, two flute, carbide tipped with bearing guides. USA

C

Shank A 5⁄16” 1¼” ½” 158-0515 $39.95 B 3⁄8” 13⁄8” ½” 179-0515 49.95 C 3⁄8” 1¼” ½” 150-0805 22.95 Save! 3-Piece Set A, B, & C 100-7905 If Sep $112.85 Set $104.99

For a perfect tight fit every time Designed to put a slight 3° bevel trim on the inside of interior doors to allow for a tight fit against the jamb. This is a contractor requested, and contractor tested bit. Two flute, carbide tipped with bearing guide. USA L D OAL Shank 15⁄16” 1½” 3½” ½” 179-6005

D

$59.95

B For 5⁄4" stock

A For ¾" stock L R

D D

D

9/16”

R

9/16”

L C

L

R



C ¼” 3⁄16” 3⁄16” 3⁄16” 3⁄16” 3⁄16” 3⁄16”

D 7⁄8” 7⁄8” 7⁄8” 7⁄8” 7⁄8” 7⁄8” 7⁄8”

R C

C

L R Shank 3⁄8” 45° ½” 179-3315 $38.95 9⁄32” 5⁄32” ½” 179-5815 41.95 9⁄32” 5⁄32” ¼” 179-5832 41.95 9⁄32” 5⁄32” ½” 179-5835 41.95 7⁄16” 3⁄16” ½” 179-5825 41.95 7⁄16” 3⁄16” ¼” 179-5842 41.95 7⁄16” 3⁄16” ½” 179-5845 41.95

Reversible Window Sash and Glass Door Assembly

Make beautiful window sash and glass doors with just one bit! The ½" shank, reversible sash cutter allows you to make both stile and rail cuts with a bearing guide. No fence required. Great for cathedral arch or odd A shaped doors and windows. Two flute, carbide tipped, with bearing guide. Instructions included.

D

Stock

B

OAL

A 1” ½” to ¾” 27⁄8” 179-2225 $79.95 B 11/8” 7⁄8” to 15⁄8” 3¾” 179-2205 99.95 C 13/8” 1” to 1½” 3¾” — — P18-3609 $39.95

D

R

or

B

D L

E

L

Designed for ¾" and 5⁄4" stock. All bits ½" shank, two flute, carbide tipped.

L

+

A

A B C C D E E

Window Sill Edge & Stool Bit

D

C

D

Door Trim Bevel Bit



Make your own wooden snap-together window grills Give your windows that classic divided look. First select our special “V” Groove bit (A). When used with any ¼" diameter straight bit you will be able to produce the matching interlocking joint. Finish off the edges with either of our specially designed colonial accent bits (B or D). Making the entire window? Using our matching rail bit profiles enables you to cope your muntin to the window frame (C or E). All bits are two flute, carbide tipped. Instructions included. USA See “3 Piece Value Sets” at EagleAmerica.com

A 1¼” 13⁄16” 7⁄32” 179-2405 $44.95 P18-3602 $29.95 B 17⁄16” 11⁄8” 3⁄8” 179-2505 54.95 P18-3604 34.95

Two Piece Matched Set 13/8” 1” to 1½” 3¾” — —

P18-3610 69.95

www.EagleAmerica.com / 1-800-872-2511

11

Straight

Now a proud distributor of MLCS Router Bits, a provider of quality router bits for 30 years!

Straight Bits

For fast, clean and efficient cutting! Industrial quality bits built to last feature extra thick micrograin carbide cutters that are radially relieved for smooth and balanced cutting. Positive hook angle and open gullet design ensures durable cutting edges with efficient chip clearance. End of bit relief design allows plunge cutting action. Two flute, carbide tipped.

L

D

L OAL Shank D 1⁄16” 5⁄16” 1½” ¼” u 102-0102 $17.75 P11-1200 $7.45 3⁄32” 5⁄16” 1½” ¼” u 102-0112 17.75 — — 1⁄8” 3⁄8” 1½” ¼” u 102-0212 13.65 P11-1203 7.45 1⁄8” 3⁄8” 2” ¼” u 102-0242 14.65 — — 5⁄32” 5⁄8” 2” ¼” u 102-0232 14.65 — — 3⁄16” 5⁄8” 17⁄8” ¼” u 102-0322 15.75 P11-1205 7.45 7⁄32” ¾” 2” ¼”  102-0332 18.95 — — 7⁄32” ¾” 2¾” ½”  102-0335 20.95 — — ¼” ½” 17⁄8” ¼” 102-0412 13.65 — — ¼” ¾” 2¼” ¼” v 102-0442 13.95 P11-1211 5.95 ¼” ¾” 23⁄8” ½” v 102-0455 16.95 P11-1212 6.95 ¼” ¾” 2½” ½” — —  P11-1301 9.95 ¼” 1” 2½” ¼” 102-0472 16.95 P11-1213 7.95 ¼” 1” 25⁄8” ½” 102-0475 17.95 — — ¼” 1” 3” ¼” 102-0492 17.45 — — ¼” 1” 3¼” ¼” 102-0432 17.95 — — 5⁄16” 1” 2¾” ¼” v 102-0562 16.95 P11-1217 9.95 5⁄16” 1” 25⁄8” ½” v 102-0565 17.95 P11-1219 7.95 3⁄8” ¾” 2” ¼” — —  P11-1305 8.95 3⁄8” 1” 2¼” ¼” v 102-0632 16.95 P11-1222 6.95 3⁄8” 1” 2¼” ¼” — — * P11-1105 8.95 3⁄8” 1” 2½” ½” — — * P11-1106 8.95 3⁄8” 1” 25⁄8” ½” v 102-0645 17.95 P11-1223 6.95 3⁄8” 1” 2¾” ½” — —  P11-1302 9.95 3⁄8” 1¼” 2¾” ¼” 102-0672 17.95 — — 3⁄8” 1¼” 3” ½” 102-0685 18.95 — — 13⁄32” 1” 2½” ½” 102-0715 18.95 — — 7⁄16” 1” 2½” ¼” 102-0702 17.95 P11-1226 7.95 7⁄16” 1¼” 3¼” ½” 102-0725 18.95 P11-1241 7.95 31⁄64” 1” 2¼” ¼”  102-0752 18.95 — — 31⁄64” 1” 2½” ½”  102-0755 19.95  P11-1293 7.95 ½” ¼” 17⁄8” ¼” 102-0802 14.95 — — — ½” 3⁄8” 2½” ¼” 102-0872 15.95 — ½” ¾” 2¼” ¼” 102-0822 16.95 — — ½” 1” 2¼” ¼” — — * P11-1101 8.95 ½” 1” 2½” ¼” v 102-0832 17.95 P11-1237 8.95 ½” 1” 2½” ½” v 102-0845 18.95 P11-1238 7.95 ½” 1” 215⁄16” ½” — —  P11-1303 9.95 ½” 1¼” 27⁄8” ½” 102-0885 19.95 P11-1240 10.95 ½” 1¼” 27⁄8” ½” * 102-0885P 23.95 * P11-1102 11.95 ½” 1½” 2¾” ¼” — — P11-1243 8.95 ½” 1½” 31⁄8” ½” 102-0905 20.95 P11-1242 9.95 ½” 2” 3½” ½” 102-0945 23.95 — — ½” 2” 41⁄8” ½” 102-0955 24.95 P11-1245 12.95 ½” 2½” 43⁄8” ½” 102-0975 30.95 — — ½” 2½” 5½” ½” 102-0965 31.95 — — 9⁄16” ¾” 2¼” ¼” 102-0992 17.95 P11-1250 8.95 9⁄16” 1¼” 3” ½” 102-0995 19.95 — — 19⁄32” ¾” 2¼” ¼”  102-1082 20.95  P11-1298 8.95 19⁄32” ¾” 2¼” ½”  102-1075 21.95  P11-1299 8.95

12

D L OAL Shank 5⁄8” ¾” 21⁄8” ¼” v 102-1032 $17.95 P11-1254 $8.95 5⁄8” 1” 2½” ½” v 102-1035 18.95 P11-1255 10.95 5⁄8” 1” 2½” ½” * 102-1035P 23.95 — — 5⁄8” 1½” 3” ½” 102-1055 20.95 — — 5⁄8” 2” 4” ½” 102-1065 26.95 — — 23⁄32” 1” 2¼” ¼”  102-1192 21.95 P11-1294 8.95 23⁄32” 1” 2½” ½”  102-1195 22.95 P11-1295 9.95 ¾” 1” 2½” ¼” v 102-1222 20.95 P11-1271 9.95 ¾” 1” 2½” ½” v 102-1225 21.95 — — ¾” 1” 2½” ½” * 102-1225P 26.95 * P11-1108 13.95 ¾” 1¼” 2½” ½” 102-1235 22.95 — — ¾” 1½” 3” ½” 102-1255 23.95 P11-1274 11.95 ¾” 2” 35⁄8” ½” 102-1265 28.95 — — 25⁄32” 1¼” 3” ½” 102-1275 22.95 P11-1276 11.95 13⁄16” 1¼” 3” ½” 102-1305 22.95 — — 7⁄8” 1¼” 3” ½” 102-1405 23.95 P11-1280 11.95 1” 1¼” 3” ½” 102-1625 24.95 P11-1283 13.95 1” 1¼” 3” ½” * 102-1625P 30.95 * P11-1111 15.95 11⁄8” 1½” 3” ½” 102-1805 30.95 — — 1¼” 1½” 3” ½” 102-2005 31.95 P11-1286 15.95 13⁄8” 1¼” 2¾” ½” — — P11-1287 17.95 1½” 1¼” 3” ½” 102-2405 35.95 P11-1288 18.95 2” 1¼” 3” ½” 102-3205 52.95 P11-1289 27.95 6-Piece Straight Bit Value Sets With Bearing Kit for Pattern Cutting Shank If Sep Set ¼” v 199-0212 $114.49 $89.99 ½” v 199-0215 126.69 99.99 u = Solid Carbide, * = Extra Carbide Boring Point,  = Down Shear Angle See more straight bits online @ EagleAmerica.com



Plywood Dado Value Sets

With exclusive down shear cutting angle Frustrated using plywood that is not as thick as advertised? That’s why we designed a line of undersized plywood bits to match these dimensions with down shear angles to prevent tear out. We guarantee you’ll get a good tight fit with extra clean edges every time. Bits feature down shear cutting angles that prevent plywood tear out. The 3-piece set includes sizes: ¼" Joint made using undersized (7⁄32" or 5.5mm), ½" (31⁄64") and dado bits. No gap! ¾" (23⁄32"). The 5-piece sets also includes 15⁄64" (6mm) and 5⁄8" (19⁄32"). All bits 2 flute. Shank If Sep. Set 3-Piece ¼” 100-0242 $59.85 $49.99 3-Piece ½” 100-0245 63.85 53.99 5-Piece ¼” 100-0252 102.75 84.99 5-Piece ½” 100-0255 108.75 89.99

Straight Combination Dado, Planer, Hinge Boring and Pattern Cutter Bits

Pattern Bits

Template routing made easy!

Leaves an extremely smooth surface. Bearing guide follows the walls of the dado cut slot while you trim away the high spots on sides and bottoms. Ideal for L cutting out hinges, pattern cutting and making signs. All bits two flute, carbide tipped, with bearing guides.

L

D

D

Place your pattern on top of your work piece and see exactly where you’re cutting. Bearing guides move easily and smoothly around your template. All bits two flute, carbide tipped, with bearing guides.

Hinge Template Door / Jamb L Shank D 31⁄64” 3⁄16” ¼” 102-0792B $20.95 P11-1300B ½” ¼” ¼” 102-0802B 20.95 P11-1304B 19⁄32” 3⁄16” ¼” 102-0902B 21.95 P11-1301B 5⁄8” ¼” ¼” 102-1002B 21.95 P11-1252B 23⁄32” 3⁄16” ¼” 102-1152B 22.95 P11-1267B ¾” ¼” ¼” 102-1202B 22.95 P11-1269B ¾” ¼” ½” 102-1205B 24.95 P11-1264B

$14.95 14.95 14.95 15.95 14.95 16.95 18.95

Bottom Cleaning, Surface Planing and Dado Cutting

Special overlapping center carbide tip design guarantees a smooth clean bottom cut. Ideal for cutting or cleaning out dadoes, cutting stair treads into risers, and putting stress relief on back of moldings. All bits two flute, carbide tipped and ½" shank. L D OAL 23⁄32” 3⁄8” 2¼” 116-1105 $31.95 ¾” 3⁄8” 2¼” 116-1205 31.95 1” 3⁄8” 2¼” 116-1605 34.95 1½” 5⁄8” 25⁄8” 116-2405 37.95 ¾” 3⁄8” 2¼” ▼ 116-1205B 45.95 1” 3⁄8” 2¼” ▼ 116-1605B 51.95 1½” 5⁄8” 25⁄8” ▼ 116-2405B 57.95 ▼ = With Bearing



With Bearing

L D

— — P11-1702 $13.95 P11-1705 14.95 P11-1706 16.95

Hinge Mortising Bits

Cut out hinges and locks Use with templates for milling out butt hinges. The large center With slot allows for quick chip Bearing removal and clearance. All bits two flute, carbide tipped. USA

L

D

D L OAL Shank With Top Bearing ½” ¾” 21⁄8” ¼” 114-0812 $14.95 114-0812B $23.75 ½” ¾” 21⁄8” ½” 114-0815 15.95 — — 5⁄8” ¾” 21⁄8” ¼” 114-1002 15.95 114-1002B 25.25 ¾” ¾” 21⁄8” ¼” 114-1212 16.95 114-1212B 26.75 ¾” 5⁄8” 2¼” ½” 114-1205 17.95 114-1205B 31.95 1¼” ½” 21⁄8” ¼” 114-2002 22.95 — — 1¼” ½” 21⁄8” ½” 114-2005 23.95 114-2005B 43.25

D L Shank 5⁄16” ¾” ¼” ▼ 102-0552B $23.75 — — 5⁄16” 1” ¼” ▼ 102-0562B 25.75 ▼ P11-1217B $13.00 3⁄8” 1” ¼” ✝ 102-0632B 22.25 ✝ P11-1222B 13.00 3⁄8” 1¼” ¼” ✝ 102-0672B 23.25 — — ½” 1⁄8” ¼” 102-0862B 21.95 — — ½” ¼” ¼” 102-0802B 20.95 P11-1229B 13.00 ½” 3⁄8” ¼” 102-0872B 22.55 P11-1244B 13.00 ½” 3⁄8” ¼” ▲ 102-0892B 23.95 — — ½” ½” ¼” 102-0842B 23.95 P11-1247B 13.00 ½” ¾” ¼” 102-0822B 24.95 P11-1236B 13.00 ½” 1” ¼” 102-0832B 25.95 P11-1237B 13.00 9⁄16” ¾” ¼” ▲ 102-0992B 27.25 ▲ P11-1250B 13.00 5⁄8” ¼” ¼” 102-1002B 21.95 — — 5⁄8” ½” ¼” 102-1012B 24.95 — — 5⁄8” ¾” ¼” 102-1032B 25.95 — — 5⁄8” 1” ¼” 102-1042B 26.95 P11-1254B 13.00 ¾” ¼” ¼” 102-1202B 22.95 — — ¾” ¼” ½” 102-1205B 24.95 — — ¾” ½” ½” — — P11-1263B 16.00 ¾” ¾” ¼” 102-1212B 26.95 — — ¾” 1” ¼” 102-1222B 27.95 P11-1271B 14.00 ¾” 1” ½” 102-1225B 30.95 P11-1272B 16.00 ¾” 1” ½” ◆ 102-1225PB 37.95 ◆ P11-1108B 18.00 ¾” 1¼” ½” 102-1235B 33.95 — — ¾” 1½” ½” 102-1255B 34.95 P11-1274B 20.00 ¾” 2” ½” 102-1265B 39.95 P11-1275B 22.00 7⁄8” 1½” ½” 102-1415B 41.95 — — 1” 1” ½” — — P11-1278B 18.00 1” 1¼” ½” 102-1625B 40.95 P11-1283B 19.00 1” 1¼” ½” ◆ 102-1625PB 46.95 ◆ P11-1111B 21.00 1” 2” ½” 102-1645B 49.95 — — 11⁄8” 11⁄8” ½” — — P11-1284B 18.00 11⁄8” 1½” ½” 102-1805B 43.95 P11-1289B 19.00 11⁄8” 2” ½” 102-1825B 46.95 — — 1¼” 1½” ½” 102-2005B 49.95 — — ◆ = Center Plunge Bit, ✝ = Without Collar, ▼ = With ½” Bearing, ▲ = 5⁄8” Bearing for Porter Cable and Keller Jigs See more pattern bits online @ EagleAmerica.com

Squared Corner Chisel

Solid steel, presharpened and ready to use. Cuts a 3⁄8" square corner. Blade removes for resharpening. Save $18! 400-3201 $11.95

SALE $11.95!

SAVE $18

www.EagleAmerica.com / 1-800-872-2511

13

Solid Carbide Non-clogging, quick action, clean cutting See 3 & 7 Piece Value Sets! Solid carbide production quality bits combine effective chip removal with shear cutting action. L D “Up-cut” pulls chips up and out of the work or toward the router. “Down-cut” cuts slower and pushes Up-Cut Down-Cut chips away from the router to eliminate top surface splintering. Bits are 2 flute, except: ▲ = 3 flute. USA. See CNC Router Bit Set on page 23. See “HSS Spiral Bits” at EagleAmerica.com L OAL Shank Up-Cut D Down-Cut 1⁄16” ¼” 1½” 1⁄8” 106-0125 — $16.95 1⁄8” ½” 1½” 1⁄8” 106-0101 106-0151 16.95 1⁄8” ½” 2” ¼” ✓ 106-0202 106-0252 17.95 5⁄32” 9⁄16” 2” ¼” ✢ ✓ 106-0282 106-0292 17.95 ✓ 106-0302 106-0352 18.95 3⁄16” 5⁄8” 2” ¼” 5mm 5⁄8” 2½” ¼” 106-0372 106-0382 18.95 7⁄32” ¾” 2½” ¼” ✲ 106-0342 106-0362 18.95 6mm 7⁄8” 2½” ¼” 106-0392 106-0332 19.95 ¼” ¾” 2½” ¼” 106-0402 106-0452 18.95 ¼” 1” 2½” ¼” ✓ ✓ 106-0412 106-0462 19.95 ¼” 1” 3¼” ½” 106-0415 106-0465 31.95 9⁄32” 1” 3” ½” 106-0475 106-0485 47.95 5⁄16” 1” 3” ½” ✓ 106-0505 106-0555 47.95 8mm 1” 3” ½” 106-0565 — 47.95 3⁄8” ¾” 3” ½” 106-0605 106-0625 43.95 3⁄8” 1¼” 3” ½” ✓ ✓ 106-0615 106-0665 49.95 10mm 11⁄8” 3” ½” 106-0695 — 49.95 7⁄16” 1¼” 3” ½” 106-0715 106-0755 49.95 31⁄64” 1” 3” ½” — 106-0795 49.95 ½” 1” 3” ½” 106-0825 106-0875 49.95 ½” 1¼” 3” ½” 106-0805 106-0855 49.95 ½” 1¼” 3” ½” ▲ 106-0925 106-0935 51.95 ½” 1½” 3” ½” ✓ ✓ 106-0835 106-0885 51.95 ½” 2” 4” ½” 106-0845 106-0895 55.95 ½” 2” 4” ½” ▲ 106-0965 106-0975 59.95 Save! Solid Carbide Spiral Value Sets If Sep. Set 100-0615 $121.85 $99.99 ✓ 3-Piece Up-Cut ✓ 7-Piece Up-Cut 100-0675 $224.65 $189.99 ✢ = For biscuit joining, ✲ = For ¼” plywood dado

Solid Carbide Compression Spiral

D

Stop unwanted tear-out Cuts through stock and gives clean cuts on both top and bottom. No tear out, designed to pull work into the center of the stock. Ideal for double sided veneer plywood, melamine, and laminates. Two flute. USA D L OAL Shank ¼” 7⁄8” 2½” ¼” 107-0402 $29.95 ½” 11⁄8” 3” ½” 107-0815 62.95 ½” 15⁄8” 3½” ½” 107-0825 69.95

14

L

Solid Carbide Spiral Flush Trim Bits

See New Solid L Carbide Superior Flush Trim bits on page 4. Designed to cut both wood based and metal laminate materials. Micrograin carbide delivers superior cutting quality, maximum cutting efficiency and extended tool life. Two flute, solid carbide, with double bearing guides. USA L D OAL Shank Up-Cut Down-Cut 1⁄8” 3⁄8” 2” ¼” * 120-0202 * 120-0212 $34.95 ¼” 1” 2½” ¼” 120-0402 120-0412 39.95 ½” 1¼” 33/4” ½” 120-0805 120-0815 79.95 ½” 2” 43/4” ½” 120-0825 120-0835 94.95 ½” 1½” 4¼” ½” ▲120-0865 99.95 * = Solid Pilot Instead of Bearing, ▲= Up/Down Compression

Face Frame V-Groove Trimmer

Now with down shear angle! This bit is a cabinetmaker’s dream. It removes the excess overhang from the face frame making it flush to the side while cutting a decorative “V” groove, hiding a less than perfect seam where the two pieces join together. All bits two flute, carbide tipped, with bearing guides. USA D

Side

Solid Carbide Spiral Bits

L

Front Face Front

D ½” ½” ½” ½”

L 1” 1” 1” 1”

OAL Shank 3¼” ¼” 117-1002 $20.95 3¼” ¼”  117-1012 25.95 3¼” ½” 117-1005 21.95 3¼” ½”  117-1015 26.95  = with Down Shear Angle

Solid Carbide Trim Bits Solid pilot design eliminates the need for a ball bearing. Use Profile (E) to trim laminates from inside shallow dado cuts. All bits ¼" diameter, ¼" shank. USA

Profile A Flush Trim B Double End, Flush C 7° Bevel Trim D Double End, 7° Bevel E Dado Flush Trim

A

B

C

D

E

L

D

L ¼” ¼” ¼” ¼” ¼”

OAL 1½” 124-0412 $9.95 2” 124-0422 14.95 15⁄8” 124-0452 9.95 2” 124-0472 14.95 19⁄16” 124-0442 11.95

Laminate Trim Mica-File Bits®

You’ll never have to file laminate tops again Bit (A) features a combination angled flush trimmer with a slight beveled edge. Eliminates the need for hand filing. Bit (B) features non-stick Teflon cased square bearing that stops spinning when it touches the piece, eliminating burning. Glue Well design (C) eliminates glue buildup. All bits are ¼" shank, two flute, carbide tipped, with bearing guide.

D

A

L

B

Flush Trim/Pattern Bits The finest, smoothest bits available. We guarantee it! Count on smooth, burn free cutting. Precision ground, L extra thick carbide with a top quality ball bearing pilot for longer tool life. Try our three flute bits for an even far superior finish. All bits carbide tipped with bearing guide.

A

B

C

D

C

Flutes D L Shank A 2 ¼” ½” ¼” 117-0402 $27.95 P12-1801 $9.00 D L OAL A 2 ¼” 1” ¼” 117-0412 28.95 P12-1802 9.50 A ½” 3⁄8” 1¾” 117-2012 $34.95 P12-1781 $17.00 Glue Well A 2 3⁄8” ½” ¼” 117-0602 15.95 P12-1803 8.00 B ¾” 3⁄8” 27⁄8” — — P12-1783 19.00 A 2 3⁄8” 1” ¼” 117-0612 16.95 P12-1804 8.00 C ½” 3⁄8” 2” 117-2022 35.95 — — A 2 3⁄8” 1” ½” 117-0615 17.95 P12-1800 8.50 A 2 ½” ½” ¼” 117-0802 15.95 P12-1806 8.00 Laminate Bits A 2 ½” ½” ½” 117-0805 16.95 — — A 3 ½” ½” ¼” 117-0812 18.95 — — With square bearings A 3 ½” ½” ½” 117-0815 19.95 — — Bearing casing made L A 2 ½” 1” ¼” 117-0822 16.95 P12-1809 9.00 from non-stick A 3 ½” 1” ¼” 117-0832 20.95 — — Teflon, stops spinning when it touches A 2 ½” 1” ½” 117-0825 17.95 P12-1810 9.00 the work piece. Eliminates glue buildup. A 3 ½” 1” ½” 117-0835 21.95 P12-1812 13.00 Won’t mar your work piece. See Euro A 2 ½” 1½” ¼” 117-0702 18.95 — — Square bearings @ EagleAmerica.com D A 2 ½” 1½” ½” 117-0855 19.95 P12-1813 10.00 A 3 ½” 1½” ½” 117-0865 25.95 — — D L OAL Shank A 2 ½” 2” ½” 117-0875 24.95 P12-1815 13.00 ½” ¼” 15⁄8” ¼” 117-2042 $19.95 P12-1786 $16.00 A 3 ½” 2” ½” 117-0885 31.95 P12-1816 16.00 ¾” 5⁄8” 2¼” ¼” 117-2052 27.95 — — A 2 ¾” 1¼” ½” 117-1205 22.95 — — ¾” 5⁄8” 2¼” ½” 117-2045 29.95 — — A 3 ¾” 15/8” ½” — — P12-1824 18.00 D A 3 ¾” 2” ½” ▼ 117-1305 39.95 — — Glue Well™ Flush Trim Bits A 2 7⁄8” 1½” ½” 117-1405 24.95 — — B 2 ½” 1½” ½” 117-1825 34.95 P12-1827 22.00 Eliminates glue buildup on ball bearings L B 3 ½” 1½” ½” 117-1835 40.95 P12-1828 26.00 resulting in a smoother cut and improved — production results. Carbide tipped with Glue Well B 2 ½” 2” ½” 117-1925 39.95 — B 3 ½” 2” ½” 117-1935 46.95 — — bearing guide. All bits ¼" shank. C 2 ½” 1” ¼” 117-0822B 25.75 P12-1809B 18.00 C 3 ½” 1” ¼” 117-0832B 29.75 P12-1811B 22.00 Flute D L OAL C 2 ½” 1” ¼”  117-0842B 29.75  P12-1714B 22.00 2 3⁄8” ½” 2¼” 122-0622 $25.95 P12-1793 $12.00 C 2 ½” 1½” ¼” 117-0702B 27.75 — — 2 ½” ½” 2¼” 122-0822 26.95 P12-1796 13.00 C 2 ¾” 1” ½”  117-1215B 46.95  P12-1726B 25.00 3 ½” ½” 2½” 122-0832 32.95 — — C 2 ¾” 1¼” ½” 117-1205B 36.95 P12-1825B 23.00 C 2 ¾” 1½” ½”  117-1245B 49.95  P12-1728B 25.00 Flush Trim Bits C 2 ¾” 2” ½”  117-1225B 51.95  P12-1729B 26.00 Eliminates tear out D C 3 ¾” 2” ½” 117-1305B 53.95 P12-1826B 30.00 These bits vibrate L C 2 7⁄8” 1½” ½” 117-1405B 40.95 — — less and feature a down or up cutting action which ▼ = for Joinery,  = Down Shear Angle,  = Up Shear Angle virtually eliminates unsightly chipped edges. All bits A two flute, carbide tipped with bearing guides. Bevel Trim D ½” ½” ¾” ¾” ¾” ¾”

L

Shank 1” ¼”  117-0842 $20.95  P12-1714 $12.00 1” ½”  117-0845 21.95  P12-1715 13.00 5⁄8” ¼”  117-1212 23.95 — — 1” ½”  117-1215 32.95 — — 1½” ½”  117-1245 35.95  P12-1728 20.00 2” ½”  117-1225 37.95  P12-1729 22.00  = with Down Shear Angle,  = with Up Shear Angle

Laminate Bits

All bits two flute, carbide tipped with bearing guide. USA A 7° 15° 25°

L

B

B L OAL Shank 7⁄16” 3⁄8” 21⁄8” ¼” 117-0902 $19.95 5⁄16” ¼” 17⁄8” ¼” 117-0912 19.95 9⁄16” ½” 2” ¼” 152-0402 19.95

www.EagleAmerica.com / 1-800-872-2511

15

Now a proud distributor of MLCS Router Bits, a provider of quality router bits for 30 years!

Joinery 2-Piece Edge Banding Bit Sets

Reversible Glue Joint Bits

n li n

o

o

v

A

D

Kwik Blocks

L

Kwik Blocks allow you to make perfect set-ups in ¾" stock. USA

90°

L

L

B A

B

D

1½”

Stronger than dowels and biscuits C Fast, accurate and strong joints. Use for edge-joining door panels, table tops or any other glue-up projects. Reversible pattern allows you to cut both the tongue and groove with just one bit. All MLCS bits two flute, carbide tipped. P16-4019 Instructions included. All bits ½" shank. C

e

Put hardwood edges on your plywood, ide particle board or MDF stock! Make your own hardwood edge banding to finish off plywood or MDF on shelves from ½" to 1" thick. The 90° bits (A) also make horizontal v-grooves or double sided chamfers. The 60° bits (B) feature a tongue and groove design for a larger gluing surface. All bits are ½" shank, two flute, carbide tipped. Eagle® bits also feature bearing guides.

L

60°

Stock Size



L

D

A ¾” 17⁄16” A 1” 1½” B ¾” 13⁄8” B 1” 17⁄16”

190-2065 $89.95 — 190-2055 104.95 P16-4041 190-2075 99.95 — 190-2045 124.95 P16-4043

2-Piece Tongue and Groove Set

L D 15⁄8” 1¼”

— $39.95 — 49.95

L

2-Pc Tongue and Groove / Flooring Sets

D

For ½" to 1¼" stock. Make interlocking tongue and groove for paneling or C cabinet doors. Cuts ¼" high x 3⁄ 8" deep tongue and groove. ½" shank, 2 flute, carbide tipped with bearing guide.

C

A ½”-1” 5⁄16” 1” 190-2615 $52.95 — — A Kwik Block Set 486-1902 10.99 — — B ½”-1¼” 5⁄32” 1¼” 190-2705 54.95 P16-4019 $30.00 B ½”-15⁄8” 5⁄32” 1¾” 190-2715 62.95 — — B Kwik Block 486-1903 10.99 486-1833 10.99

For 3⁄8" to 1¼" stock These sets give you a good strong joint. Profile D features a bottom taper and a 1⁄16" tongue and groove offset to allow for easy assembly, room for expansion and a good tight fit without any visible gaps along the top surface. All bits ½" shank, ¼" tongue, two flute, carbide tipped. With bearing guides, except 190-2345.

L

C

A

D

3⁄8”” P16-4007 $69.95

L T

2-Piece Tongue and Groove Flooring Set with Nail Slot For 5⁄8" to ¾" stock Featuring a nail slot groove with bottom taper and a 1⁄16" tongue and groove offset to allow for easy assembly, room for expansion and a good tight fit without any visible gaps along the top surface. All bits are ½" shank, two flute, carbide tipped with bearing guide. Sold as set only.

C

D

B L

D

T

Extra Long!

Extra Long!

C

½° Taper

Nail Slot

D L C T OAL 1¼” 15⁄16” ¼” ¼” 2½” 190-2555 $99.99 P16-4020 $59.95

16

C





D

L

C

A 1¾” 1” ¼” 190-2405 $119.95 P16-4009 $69.95 B 1¼” 1¼” 5⁄16” 190-2505 104.95 P16-4017 69.95 NEW! B 15⁄8” 1¼” 3⁄8” — — P16-4007 69.95 C 1¼” 1¼” 5⁄16” 190-2345 99.95 P16-4016 59.95 D 1¼” 11⁄8” 5⁄16” — — P16-4038 69.95

Joinery Glue Joint Value Set All bits ½" shank.

A

B

45° Lock Miter Bits C

D

A Reversible Glue Joint B Reversible Drawer Lock C 45° Lock Miter D Finger Joint

190-2705 182-1705 192-2815 191-2215 Save! Glue Joint Value Set If Sep. Set 4-Piece Set 199-9027 $265.80 $199.99

Finger Joint Bits

For stock sizes 5⁄16" to 1¼" Produce professional, D top quality finger joints in a wide range of stock thicknesses. Join wood endto-end or edge-to-edge. L To use, simply align cutters with the center of the stock C and make first cut, face up. Cut the mating piece face down. Both bits are carbide tipped, 2 flute with bearing guides. Use in router table only. ½" shank. D L without C bearing 5⁄16” 13⁄8” 1½” 191-2215 $99.95 P16-4037 $44.95

Reversible Drawer Lock Glue Joints Lock your drawer fronts in place A Produce a strong, durable and efficient joint. Use them for gluing drawer fronts and L sides together. All bits two flute, carbide tipped. D Instructions included.For easy Stock Size set-ups order Kwik Blocks. ½” minimum



D

A L

Front

Shank

Rabbeting Miter Joint Set

A D

Side

B

Front



A ¾” ½” ¼” 182-1702 $34.95 P16-4005* $24.00 A 1” ½” ½” 182-1705 35.95 — — A 2” ½” ½” 182-1715 49.95 P16-4006* 25.00 A Kwik Blocks 486-1910 10.99 486-1832 10.99 B 1” 1” ¼” 182-0812 42.95 — — B 1” 1” ½” 182-0815 43.95 P16-4001* 26.00 B Kwik Blocks 486-1911 10.99 — — *See EagleAmerica.com for MLCS specs

B D

Two piece router bit set makes a 45˚ miter rabbet joint that produces a L larger glue surface area than a simple miter joint, with precise edge alignment. The final joint will show no end grain. Great for plywood. Use for stock from ½" to ⅞" thick for making boxes, cabinet frames, drawers, etc. ½" shank, 2 flute, carbide tipped.

D

L

Two Piece Set List $99.90 P16-4044 $89.95

Kwik Block Stock Size ¼” - 3/4”

D

L Shank D 1½” 9⁄16” ¼” 192-1602 $68.95 — — 1½” 9⁄16” ½” 192-1605 69.95 P16-4028 $36.50 Kwik Block 486-1921 10.99 486-1837 10.99 2” 7⁄8” ¼” 192-2812 73.95 P16-4023 37.50 2” 7⁄8” ½” 192-2815 74.95 P16-4024 38.50 Kwik Block 486-1922 10.99 486-1838 10.99 2¾” 11⁄8” ½” — — P16-4026 47.50 31⁄8” 1¼” ½” 192-4405 99.95 — — Kwik Block 486-1923 10.99 486-1925 10.99

A 13/8” 1” B 2” 7/8”

Side

A

Great for Drawer Slides

B

Lock corners in place Produce extra strong miter joints in boxes, beams, columns, and cabinet face L frame corners. When positioned 45° properly both pieces can be run without moving the bit - one vertically one horizontally. Use to glue up board stock horizontally. Two flute, carbide tipped, with instructions. Use Kwik Blocks for easy set-ups.

486-1839

10.99

Two Piece 22½° Lock Miter Sets

For 3⁄8" to 7⁄8" stock. Our set makes both a horizontal and matching, 45° joint by cutting 22½° miters. Popular on cabinet Make a 45° Joint by Cutting corners or for making Glue Joint 22½° Miters interlocking edge-toedge joints on 8 sided projects such as D planters boxes. Use in router table only. L Both bits two flute, carbide tipped, ½" shank. Set only. L D OAL 1½” 7⁄8” 2¼” 192-4505 $139.95 P16-4045 $49.95

www.EagleAmerica.com / 1-800-872-2511

17

Rabbeting Rabbet “Master-Pro” Value Sets

SAVE

48%

UP TO Now get up to 10 cuts with just one bit! Our rabbet bits with extra thick carbide feature cutting lengths from ½" up to 1" and with up to 10 bearings, you will be able to cut any depth of rabbet and flush trim too! Kits include rabbet bit plus extra bearing guides and allen key for bearing changes. Bearing depth conversion chart included. # of Cut Standard Shank Bearings Length Depth Cut Additional Depth of Cuts: If Sep Set ¼” 4 ½” 3⁄8” 7⁄16”, 5⁄16”, ¼” 100-5142 $40.32 $34.99 ½” 4 ½” 3⁄8” 7⁄16”, 5⁄16”, ¼” 100-5145 40.32 34.99 ¼” 4 ½” ½” 9⁄16”, 7⁄16”, 3⁄8” 100-5242 42.32 36.99 ½” 4 ½” ½” 9⁄16”, 7⁄16”, 3⁄8” 100-5245 42.32 36.99 ½” 4 ¾” 3⁄8” 7⁄16”, 5⁄16”, ¼” 199-5005 44.32 38.99 ½” 4 1” ¾” 5⁄8”, ½”, 3⁄8” 100-5345 74.92 59.99 ¼” 7 ½” 3⁄8” 7⁄16”, 5⁄16”, ¼”, 3⁄16”, 1⁄8”, flush 100-5172 73.79 59.99 ½” 7 ½” 3⁄8” 7⁄16”, 5⁄16”, ¼”, 3⁄16”, 1⁄8”, flush 100-5175 73.79 59.99 ½” 7 ¾” 3⁄8” 7⁄16”, 5⁄16”, ¼”, 3⁄16”, 1⁄8”, flush 100-5185 77.79 63.99 ¼” 8 ½” ½” 9⁄16”, 7⁄16”, 3⁄8”, 5⁄16”, ¼”, 1⁄8”, flush 100-5282 91.58 69.99 ½” 8 ½” ½” 9⁄16”, 7⁄16”, 3⁄8”, 5⁄16”, ¼”, 1⁄8”, flush 100-5285 91.58 69.99 ½” 10 1” ¾” 11⁄16”, 5⁄8”, 9⁄16”, ½”, 7⁄16”, 3⁄8”, 5⁄16”, 3⁄16”, flush 100-5075 141.96 79.99 Combination Rabbet and Slotting Bits

Extra thick carbide for extra long life! Lap Joints • Inlays • Slotting • Drawer Faces • Dados • Tongue & Groove • Inset Cabinet Doors Designed to give you super smooth cuts on all 3 cutting surfaces. Relieved on top and bottom with shear angle for easy chip free D routing. All rabbets come with L a bearing but can be changed to other sizes for a variety of C cutting depths. All bits two flute, carbide tipped with bearing guide. C D Shank L 1⁄8” ¼” 1¼” ½” — — P14-2714 $13.00 1⁄8” 3⁄8” 1¼” ½” 150-0205 $19.95 — — 5⁄32” ½” 1½” ½” 150-0305 20.45 — — 5⁄32” 9⁄16” 15⁄8” ½” — — P14-2704 15.00 5⁄32” 23⁄32” 115⁄16” ½” — — P14-2717 16.00 ¼” 3⁄8” 1¼” ¼” 150-0402 20.95 P14-2705 13.00 ¼” 3⁄8” 1¼” ½” 150-0405 20.95 P14-2706 13.00 3⁄8” 3⁄8” 1¼” ¼” 150-0602 21.95 — — 3⁄8” 3⁄8” 1¼” ½” 150-0605 21.95 P14-2708 14.00 ½” 3⁄8” 1¼” ½” 150-0805 22.95 P14-2710 15.00 ½” ½” 1½” ¼” 150-0812 24.95 P14-2711 17.00 ½” ½” 1½” ½” 150-0815 24.95 P14-2712 17.00 ¾” 3⁄8” 1¼” ½” 150-1205 26.95 — — 1” ¾” 17⁄8” ½” 150-1325 44.95 P14-2715 26.00 See more bits at EagleAmerica.com

Rabbet Biscuit Joining Kit

Cut #0, #10, & #20 slots with one bit Kit comes complete with bit and three bearings for all three biscuit sizes and allen key wrench. Two flute, carbide tipped. USA Shank If Sep. Kit ¼” 100-5052 $36.72 $29.99 ½” 100-5055 36.72 29.99

18

Rabbet Flooring Under Cutter and Floating Lettering Bits Clean out old tongue and groove flooring easily For floor repairs where a bottom mounted bearing makes it impossible to plunge the bit low enough. Use 149-1612B to clean out the old groove fast. Use L C with lettering or other patterns to make them look like they are floating on air. All bits two flute, carbide tipped, ¼" shank.

With Bearing C L D

C L

L C D OAL 1⁄8” ¼” ¾” 17⁄8” 149-1202 $18.95 — — 1⁄8” ½” 1¼” 1¾” 149-2002 19.95 — — ¼” 3⁄8” 1” 2” 149-1612 20.95 — — ¼” 5⁄8” 1½” 2” 149-2402 21.95 — — With Bearing 1⁄8” 1⁄8” ¾” 17⁄8” 149-1202B 26.95 — — 1⁄8” 3⁄8” 1¼” 1¾” 149-2002B 27.95 P14-2699 $17.00 ¼” ¼” 1” 2” 149-1612B 28.95 — — ¼” 3⁄8” 1¼” 2” — — P14-2700 18.00 ¼” ½” 1½” 2” 149-2402B 29.95 — —

Wood Biscuits

Size Quantity #0 250 446-0025 $13.99 #10 250 446-1025 13.99 #11 100 446-3011 16.99 #20 250 446-2025 13.99 #20 1000 446-2100 34.99 #11 H-9 100 446-3009 10.99 FF 175 446-3175 10.99 Biscuits are 5⁄32" thick, except H-9 which is 1⁄8" thick

Biscuits expand when glued for #20 a tight fit. #10

#0 #H-9 #FF

Slot Cutters 10-Piece Slot Cutter and Dado Sets

Most versatile ... best value! Cut dadoes, biscuit slots, tongue and groove, rabbets and slots from 1⁄16" to ¾" with a standard cutting depth of ½". Use individually or in combination. Set includes 9 slot cutter sizes: 1⁄16", 5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ¼", 9⁄32" plus arbor assembly with bearing and spacers. Carbide tipped. Case included. USA Shank ¼” ½” ¼” ½”

Wing If Sep. Set 3 199-4602 $190.50 $139.99 3 199-4605 190.50 139.99 4 199-4612 225.50 159.99 4 199-4615 225.50 159.99

Tongue and Groove and Tenon Assembly Now cut ¾" stock cleanly Cuts both the tongue and 9/32” groove for ¾" and 13⁄16" stock 9/32” cleanly. Cut ¼", ⅜", or ½" 9/32” deep tongue and groove lengths using one of the three furnished bearing guides. Instructions included. USA

D

All slot cutters are 17⁄8" in diameter with a 5⁄16" diameter bore. Cutters are ½” L interchangeable and can be combined and stacked on the same 17/8” arbor giving you a wide variety of cutting possibilities. All cutters carbide tipped. Arbor assemblies sold separately. USA

Box Joints

T-Molding

Tenon Joint

Tongue & Groove L 1⁄16” 5⁄64” 3⁄32” 1⁄8” 5⁄32” (4mm) * 3⁄16” 7⁄32” (5.5mm) 15⁄64” (5.9mm) ¼” 9⁄32” 5⁄16”

*Biscuit Joining Lap Joint

3-Wing 4-Wing 146-0130 $17.95 146-0140 $21.95 146-0330 18.95 146-0340 22.95 146-0430 18.95 146-0440 22.95 146-0630 19.95 146-0640 23.95 146-0830 19.95 146-0840 23.95 146-0930 20.95 146-0940 24.95 146-2230 20.95 146-2240 24.95 146-2330 20.95 146-2340 24.95 146-1030 20.95 146-1040 24.95 146-2830 21.95 146-2840 25.95 146-3130 25.95 — —

Arbor Assembly

Shaker Doors

Wings 3 3 4 4

3 & 4 Wing Slot Cutters

D

Shank 17⁄8” ¼” 193-2832 $69.95 17⁄8” ½” 193-2835 69.95 17⁄8” ¼” 193-2842 79.95 17⁄8” ½” 193-2845 79.95

Box Joint Bit Kits

WINTER

SALE

For stock up to 3⅛" in width SAVE extra $10 Ends 2/28/17. Make perfect fitting box joint cuts. The assembly includes five, three-wing 5⁄32" carbide tipped slot cutters, four precision machined spacers, and four ball bearing guides for cutting ¼", 5⁄16", ⅜" and ½" thick stock. Cuts up to 19⁄16" wide stock in one pass. Instructions included. ½" shank. USA See “MLCS Box Joint Bit” on page 33. If Sep. Kit SAVE extra $10 3-Wing 193-0855 $164.76 $99.99 SAVE extra $10 4-Wing 193-0755 184.76 119.99

Includes 5⁄16" diameter arbor, ⅞" O.D. bearing, spacer and nut.

A Thread Length 13⁄16” ¾” 13⁄16” ¾” 17⁄16” ½” 2¼” ¼” 7⁄8” ½”

A

OAL Shank 211⁄16” ¼” 197-0512 $9.95 211⁄16” ½” 197-0515 9.95 33⁄16” ½” 197-8405 10.95 37⁄8” ½” 193-0835 11.95 4” ½” 197-4625 12.95

Stackable Slot Cutter Set

Versatile, carbide tipped three-wing set cuts a wide variety of grooves. With the included six carbide-tipped slot cutters (1/16", 3/32", ⅛", 5/32", 3/16", and ¼"), shims, and bearing (⅞" OD x 5/16" ID) for ½" cut depth, almost any groove from 1/16" to 11/16" can be created. Individual cutters can also create precisely-sized grooves. Purchase individual bearings to adjust the depth of cut. Storage box included. SAVE $17 P19-2600 Reg. $76.00 $58.95

www.EagleAmerica.com / 1-800-872-2511

19

Router Bits Mitered “Door” Frame Bits

Combo Value Set Saves $40! Includes a

Mitered Door Frame “A” C

“Door” bit, a “Drawer” bit, and a Merle Clamp. These versatile carbide tipped router bits create a dramatic door frame without complicated joinery. Great for L mirror and picture frames, crown moldings, chair rails and other trim. Combine with any raised panel router bit to create very decorative doors, that until now have only been available through expensive cabinet D shops. Use a ¼" slot cutter to create the slot for the raised panel or a rabbeting bit to make glass panel doors, mirrors or picture frames. Stock is mitered at 45º and biscuit joined A to create a sturdy joint. B C D Use in a table mounted ½"router only. All bits are two flute, carbide tipped with bearing guides, anti-kickback designs, and ½" shank. C D L A 7⁄16” 1½” 3” 175-4805 $99.99 P14-3652 $54.95 B ½” 1½” 2½” 175-4807 99.99 P14-3653 49.95 C ½” 1½” 211⁄16” — — P14-3656 49.95 P14-3658 49.95 D ½” 1¾” 213⁄16” — — E ½” 1½” 211⁄16” — — P14-3659 49.95

Combo Value Set!

Mitered “Door” and “Drawer” Frame Bits, plus Merle Clamp! Includes “B” profile Mitered Door Frame bit, “B” profile Mitered Drawer Frame bit plus the Merle Clamp (P. 70).

SAVE $40! Includes Eagle 175-4807, 175-4809 & Merle Clamp. 199-1001 If Sep. $219.93 $179.99 SAVE $40! Includes MLCS P14-3653, P14-3666 & Merle Clamp. P20-2010 If Sep. $119.85 $79.95

4 Piece Flush Trim Router Bit Set SAVE $9.80! The finest, smoothest bits

available. Precision ground, extra thick carbide with a top quality ball bearing pilot for longer tool life. USA. Includes: • 117-0612 (⅜" D x 1" L) • 117-0842 (½" D x 1" L downshear) • 117-0855 (½" D x ½" L) • 117-1225 (¾" D x 2" L downshear)



20

SALE!

117-0411 Reg. $95.80 $85.99

Mitered Door Frame “B”

Mitered Door Frame “C”

Mitered Door Frame “D”

E

Mitered Door Frame “E”

Mitered “Drawer” Frame Bit A smaller version of the Door Frame bit, this 2 flute carbide tipped bit makes matching profile drawer frames or smaller size door frames. For 1½" stock.

A

B

Mitered Drawer Frame "B"

C D L 175-4810 $89.99 P14-3667 $39.95 NEW! A ¼” 1” 1½” B 5⁄16” 13⁄16” 1½” 175-4809 89.99 P14-3666 39.95

2 Piece Solid Carbide Spiral Flush Trim Set

SAVE $10! Cuts both wood based and metal laminate materials. Solid micrograin carbide delivers superior cutting quality, maximum cutting efficiency and tool life. Two flute with double bearing guides. USA. Includes: • 120-0402 (¼" D x 1" L Upcut) • 120-0412 (¼" D x 1" L Downcut)

SALE!

120-0400 Reg. $79.90 $69.99

Now a proud distributor of MLCS Router Bits, a provider of quality router bits for 30 years!

Groove Forming

Picture Hanging or Keyhole Bits

Mount your frames flush to the walls A fast, inexpensive way to hang pictures, plaques, clocks, bracket shelves, etc. flush to your walls. No need for hooks and wires! Creates a small T-slot “shoulder” which S grabs the head of a nail or screw. Carbide tipped. All Eagle America bits single flute. MLCS bits two flute.

A

Bowl, Tray and Lettering Bits

L

3/16” D

Designed to make either raised or recessed letters. Routs (1) straight side, (2) rounded bottom corner and (3) flat bottom all in one pass. Use these bits for routing pockets in serving trays, bowls, plates and special boxes. All bits two flute, carbide tipped.

C

B

1 2

Use for “Stress Relief” in Moldings

3

With Bearing

L

D

S L Shank D A 3⁄8” 3⁄16” ¼” ¼” 142-0602 $15.95 P13-2411 A 3⁄8” 3⁄16” ¼” ½” 142-0605 15.95 P13-2412 B ½” ¼” 5⁄16” ¼” 142-0802 17.95 P13-2413 B ½” ¼” 5⁄16” ½” 142-0805 17.95 P13-2414 C 5⁄8” 3⁄8” ¼” ¼” 142-1002 24.95 — C 5⁄8” 3⁄8” ¼” ½” 142-1005 24.95 —

Beaded Picture Frame Molding Bit

D

Create stunning picture frames for all your artwork. Two flute, carbide tipped. ½" shank. C ½”

$8.00 9.00 9.00 9.50 — —

L

C

L D 13⁄16” 111⁄16” 175-1205 $69.95

Oval Frame / Plaque Set SAVE $10 Ends 2/28/17.

WINTER

SALE

Clear polycarbonate lets you see where you are positioning. The 6-piece set includes templates with 3½" x 5", 5" x 7", 7" x 9", and 9" x 11" inside measurements for picture frames, and 2" x 3" and 3½" x 5" outside measurements for plaques. 400-1916 $39.99 $29.99

L D Shank 7⁄16” ½” ¼” 144-0702 $23.95 — — ¾” 5⁄8” ¼” 144-1202 24.95 — — ¾” 5⁄8” ½” 144-1205 24.95 — — 1” ½” ½” — — P13-2505 $16.00 1¼” ½” ½” 144-2005 29.95 P13-2504 19.00 With Bearing ¾” 5⁄8” ¼” 144-1202B 29.95 P13-2502B 19.00 ¾” 5⁄8” ½” 144-1205B 32.95 P13-2503B 20.00 1¼” ½” ½” 144-2005B 35.95 P13-2504B 24.00

“T” Slat Wall, Channel and Hinge Bits

Great for jigs and fixtures Mill horizontal T-slats that will accept the head of a standard bolt, perfect for use on sliding shop fixtures and jigs. L2 Can also be used for removable hinges. S Our Slat Wall Bit (143-1905) lets you L1 create sturdy and attractive D commercial wall display units at a fraction of the cost of pre-cut panels. Once you have cut your panels reinforce them with our T-Track Extrusion (416-0439) so your slat wall can handle heavier items. All bits two flute, carbide tipped.

B

A C

Solid Carbide Screw Slot Bits

Create #8 screw slots to hold table tops and large panels in place or slide back and A B forth without breaking screws or splitting the wood. Use counterbores (A) for washerhead round screws and countersink (B) for bugle heads. All bits two flute, solid carbide. USA L

A

D

L

D

B

OAL Shank $30.95 30.95 Save! Buy Both A and B 100-4305 If Sep $61.90 Set $55.99

A ½” 15⁄16” 3” ½” 143-0205 B 7⁄16” 15⁄16” 3” ½” 143-0105

For ¼” - 20 Hex-Bolts Use 143-0702

D



D

S

E

3/8”

¼”

Slat Wall Bit

¼”

Aluminum Inserts available below (see 416-0439)

L1 L2 Shank



A 29⁄64” ¼” 3⁄16” 5⁄16” ¼” *143-0702 $24.95 — — B 17⁄32” 11⁄32” 1⁄8” 3⁄8” ¼” *143-0982 25.95 — — C 11⁄16” 3⁄8” 5⁄16” ½” ½” 143-1705 46.95 — — C ¾” 3⁄8” 1⁄8” ½” ¼” — — P13-2405 $12.00 C ¾” 3⁄8” ¼” ½” ¼” — — P13-2406 17.00 C 1” 3⁄8” 3⁄8” ½” ½” — — P13-2407 18.00 D 13⁄16” 3⁄8” ¼” ¼” ½” 143-1905 52.95 P13-2409 29.00 E 4’ Extruded Aluminum Slat Wall Insert 416-0439 $6.49 6+ $5.97 ea 3” Hex Bolts ¼ - 20 (12 Pack) 416-0391 2.99 * Single Flute

www.EagleAmerica.com / 1-800-872-2511

21

Groove Forming and Sign Making 6-Piece Sign Maker’s Set

WINTER

SALE

With extra long shanks! Whether you are using the Router Sign-Pro™ template set or working freehand, you’ll need these ¼" shank, two flute router bits. • ¼", ⅜" 90° V-Groove • ½" 60° V-Groove • ¼", ⅜", ½" Round Nose Bits 100-3212 If Sep. $113.70 Set $79.99 P10-1091 If Sep. $73.00 Set $49.99

Sign Making Holiday Packages SAVE $44! Includes Sign Pro Kit 400-2308 and Eagle

6-Piece Sign Maker's Set 100-3212. Expires 2/28/17.

400-2301 If Sep. $173.69 $129.99 SAVE $33! Includes Sign Pro Kit 400-2308 and MLCS

6-Piece Sign Maker's Set P10-1091. Expires 2/28/17.

P10-2301 If Sep. $132.99

$99.99

Router Sign-Pro™ Sign Making Template Kit

Easy and enjoyable sign making Self-centering templates include numbers, letters and punctuation in 1½" and 2½" sizes. The 7" TurnLock base plate pin fits most popular routers. The metal bushings change easily without tools. Metal rails are easily joined for signs up to 36". Low profile C-clamps allows clamping without obstructing your router’s movement. Includes two carbide core box bits (¼" and 3⁄8"). TM

Vertical The Sign-Pro Kit includes 168-piece horizontal template kit containing 2-sets Numbering

of 10 numbers, 29 letters (2 of A, E, and I), an apostrophe, period and spacer in both 1½" and 2½" heights. PLUS a 40-piece vertical number kit that contains 2-each of 0 thru 9 in 1½" and 2½" heights. Milescraft Sign-Pro Kit 400-2308 $59.99 Extra 42-Piece Horizontal Letter Set - 1½” 400-2310 9.99 Extra 42-Piece Horizontal Letter Set - 2½” 400-2320 9.99

60° Chamfer Lettering Bits

For use with Sign-Pro system. See page 36. USA 133-0802 $23.95

22

V-Grooving & Lettering Bits

The sign maker’s secret Use for routing wheat patterns, drawer fronts, decorative panel L veining, and chamfering. The D 22°, 45°, and 60° V-groove bits With Bearing cut a delicate vein and are used for sign making and wood threading applications. All bits two flute, carbide tipped. See bits with top bearings @ EagleAmerica.com Kwik Check

22° 45°

60°

90°

120°

Deg D L OAL Shank 22° ¼” 5⁄8” 2½” ¼” 132-0422 $24.95 — — 45° ¼” 5⁄8” 2½” ¼” — — P13-2112 $9.00 45° 5⁄8” 7⁄8” 27⁄16” ¼” 132-1022 26.95 P13-2113 16.00 60° ¼” ½” 1½” ¼” 132-0412 14.95 — — 60° ¼” ½” 2” ¼” 132-0432 16.95 — — 60° ½” 5⁄8” 2” ¼” 132-0802 18.95 — — 60° ½” 5⁄8” 23⁄8” ¼” 132-0842 19.95 P13-2125 14.00 60° ½” 5⁄8” 2¼” ½” 132-0805 19.95 P13-2107 14.00 90° ¼” 3⁄8” 2½” ¼” 132-0442 15.95 P13-2122 9.00 90° 3⁄8” 9⁄16” 1¾” ¼” 132-0602 15.95 — — 90° 3⁄8” 9⁄16” 23⁄8” ¼” 132-0622 16.95 P13-2108 10.00 90° ½” ½” 111⁄16” ¼” 132-0822 17.95 P13-2110 11.00 90° ½” ½” 2” ½” 132-0815 19.95 P13-2109 11.00 90° 5⁄8” ½” 21⁄8” ½” 132-1005 34.95 P13-2121 13.00 90° ¾” 9⁄16” 2¼” ½” 132-1205 36.95 P13-2114 14.00 90° 1” ¾” 2¼” ½” 132-1605 44.95 P13-2116 20.00 90° 1½” 15⁄16” 2¾” ½” 132-2405 62.95 — — 120° 1¼” 13⁄16” 23⁄8” ½” — — P13-2133 28.00 120° 1¾” 13⁄16” 23⁄8” ½” 132-2805 64.95 — — More V-Grooving and Lettering bits at EagleAmerica.com

45° / 15° Sign Making/Veining Bit Specially designed for tracing and routing out wood letters in signs and other intricate design work. Ideal for CNC routing. The long cutting length adds visual appeal to your letters. Two Flute. Solid carbide. USA

L

15° 45°

D

L OAL Shank 5⁄8” 2½” ¼” 133-0402 $29.95

60° & 90° Double Ended Bit

Great for production work. Ideal for making signs and wood threading. Solid carbide. USA D L1

Flutes 2 3

L1

1⁄8” 1⁄8”

L2

L2 L OAL Shank 3⁄16” 2” ¼” 132-9002 $26.95 3⁄16” 2” ¼” 132-9012 28.95

Now a proud distributor of MLCS Router Bits, a provider of quality router bits for 30 years!

Groove Forming and Sign Making

Point Cutting Plunge Roundover Bits

Round Nose

For fluting, grooving, edge forming and sign making Also known as core box, reeding or veining bits. High up-shear angle With Bearing lifts the chips out. Most bits two flute, carbide tipped. See Top Mounted Bearing L kits @ EagleAmerica.com

Accent your next project. Adjust the cutting depth and get a variety of eye catching beads, veins, and roundovers. Use for making decorative cabinet panel doors and drawer fronts. Great for sign making. Also available with top mounted bearing for template routing. All bits two flute, carbide tipped. Kwik Check

A

Make Drawer and Tray Pulls

B

C

D With Bearing

E

F

L R



R

L Shank

A 1⁄16” ¼” ¼” ●● 139-0202 $17.95 P13-2307 B 1⁄8” 3⁄8” ¼” ●● 139-0402 18.95 P13-2310 B 1⁄8” 3⁄8” ½” — — P13-2308 C 3⁄16” 3⁄8” ¼” ● 139-0602 19.95 P13-2309 C 3⁄16” 3⁄8” ½” ● 139-0605 20.95 P13-2313 D ¼” 3⁄8” ¼” ● 139-0702 20.95 P13-2311 D ¼” 3⁄8” ½” ● 139-0715 21.95 P13-2315 E 3⁄8” 5⁄8” ¼” ● 139-1202 23.95 P13-2312 E 3⁄8” 5⁄8” ½” ● 139-1205 24.95 P13-2314 F ½” ¾” ½” 139-1605 35.95 P13-2316 With Bearing

$12.50 13.00 13.00 14.50 14.50 16.00 16.00 19.00 19.00 22.00

C 3⁄16” 3⁄8” ¼” * 139-0602B 25.25 * P13-2309B 19.80 D ¼” 3⁄8” ¼” 139-0702B 29.75 P13-2311B 24.80 E 3⁄8” 5⁄8” ¼” 139-1202B 33.75 P13-2312B 28.80 5-Piece Point Cutting Value Sets If Sep. Set ● 199-0322 $101.75 $79.99 ● 199-0325 104.75 82.99 * = Supplied Without Collar More bits @ EagleAmerica.com

o

o

nlin DEMO vi de

e

8 Piece CNC Router Bit Set

Solid carbide and carbide tipped ¼" shank bits for CNC operations. See ½" shank set at Eagleamerica.com

Great for Raised Panels

D

D L OAL Shank 1⁄8” ¼” 2” ¼” ◆ 130-0202 $15.95 S P13-2001 $9.00 3⁄16” 3⁄8” 2” ¼” ◆ 130-0302 15.95 S P13-2002 9.00 ¼” ¼” 1½” ¼” — — P13-2012 10.00 ¼” ¼” 23⁄8” ½” — — P13-2018 10.00 ¼” ½” 2” ¼” ◆ 130-0402 16.95 P13-2006 11.00 3⁄8” 3⁄8” 15⁄8” ¼” — — P13-2015 11.00 3⁄8” ½” 2” ¼” ● 130-0602 19.95 P13-2004 12.00 3⁄8” 3⁄8” 23⁄8” ½” — — P13-2020 11.00 3⁄8” 1” 25⁄8” ½” ● 130-0605 26.95 P13-2005 13.00 ½” 11⁄32” 15⁄8” ¼” — — P13-2016 12.00 ½” 5⁄8” 23⁄8” ¼” ● 130-0802 21.95 P13-2007 13.00 ½” 11⁄32” 23⁄8” ½” — — P13-2021 13.00 ½” 1¼” 27⁄8” ½” ● 130-0805 26.95 P13-2008 14.00 5⁄8” 7⁄16” 2” ¼” ● 130-1002 22.95 P13-2010 14.00 5⁄8” 1¼” 27⁄8” ½” ● 130-1005 28.95 P13-2011 15.00 ¾” 5⁄8” 2” ¼” ● 130-1202 24.95 P13-2013 15.00 ¾” 5⁄8” 2½” ½” — — P13-2023 15.00 ¾” 1¼” 27⁄8” ½” ● 130-1205 31.95 P13-2014 15.00 7/8” 7/8” 25/8” ½” — — P13-2024 17.00 1” ¾” 25/8” ½” — — P13-2025 18.00 1” 1¼” 27⁄8” ½” 130-1605 42.95 P13-2017 20.00 11/8” 1” 27/8” ½” — — P13-2026 20.00 1¼” 1¼” 3” ½” 130-2005 46.95 P13-2019 21.00 1½” 1¼” 3” ½” 130-2405 55.95 P13-2027 25.00 2” 11⁄8” 3” ½” 130-3205 83.95 P13-2030 29.00 4-Piece Round Nose Value Sets Shank If Sep. Set ¼” ●199-3042 $89.80 $69.99 ½” ●199-3045 113.80 89.99 ◆ = Solid Carbide S = Single Flute See more Round Nose bits @ EagleAmerica.com

Spray Ink

D L OAL shank Solid Carbide Router Bits Spiral Up-Cut ¼” 1” 2½” ¼” 106-0412 $19.95 Spiral Down-Cut ¼” 1” 2½” ¼” 106-0462 19.95 Compression Spiral ¼” 7/8” 2½” ¼” 107-0402 29.95 Round Nose 3/16” 3/8” 2” ¼” 130-0302 15.95 Round Nose ¼” ½” 2” ¼” 130-0402 16.95 45°/15° Sign Making/Veining ¼” 5/8” 2½” ¼” 133-0402 29.95 Carbide Tipped Router Bits 60° V-Grooving & Lettering Bit ¼” 5/8” 2” ¼” 132-0802 18.95 90° V-Grooving & Lettering Bit ½” ½” 111/16” ¼” 132-0822 17.95 CNC Value Set! Complete 8 Piece Set 106-1010 If Sep. $169.60 $134.99

Great for sign making! A high quality, waterproof, non epoxy based ink that permanently marks on all surfaces and dries in 1 minute. For raised letters and designs, just layout your templates, spray over, remove the templates and you are ready to free hand route. For recessed letters or designs, route first using your templates, then spray over and sand to remove overspray. 11 oz. USA Mix/Match 2+ea Red 400-1705 $6.99 $6.59 Yellow 400-1707 6.99 6.59 Blue 400-1708 6.99 6.59

Mix/Match 2+ea Orange 400-1709 $6.99 $6.59 Black 400-1710 6.99 6.59 Green 400-1711 6.99 6.59

www.EagleAmerica.com / 1-800-872-2511

23

Now a proud distributor of MLCS Router Bits, a provider of quality router bits for 30 years! n li n

e

o

ide

v

12" Dovetail Jig

o

Dovetails

WINTER

SALE SAVE 5! Ends 2/28/17. Includes 12" steel jig, ½" half blind

aluminum template, a FREE carbide tipped 14˚- ½" dovetail router bit, and instruction manual. Make ½" wide half blind dovetails (regular or rabbeted) spaced 27⁄32" on center for ½" to 1" thick drawer sides and 5⁄8" to 1" front, up to 12" high. Self-spacing edge guides give perfect offset for precise joints. Steel beams secure both pieces, and both sides of the half-blind dovetail joint are cut simultaneously for a perfect fit. 5⁄8" router guide bushing required (see below). With ½” shank dovetail bit 415-8706 $59.99 $54.99 With ¼” shank dovetail bit 415-6406 59.99 54.99 5/8" OD Brass Router Guide Bushing 415-9049 9.99

Pins & Tails Through Mini Dovetail Template

FREE! Two Router Bits and Brass Guide Bushing! For stock up to ⅜" thick. Make through dovetail joints on smaller projects. ¼" tails spaced ½" on center. Adjust router bit to match stock thickness. Includes cast aluminum through dovetail template, a ¼" 8° dovetail bit and a ⅛" diameter straight bit (both with ⅛" dia. shank), a ⅛" to ¼" adapter sleeve (for ¼" router collets), and a 7/32" O.D. brass template guide bushing to fit router bases with a 13/16" stepped center hole. 415-6404 If Sep. $66.99 $49.99

Pins and Tails Through Dovetail Templates

An inexpensive tool for making through dovetails. Made of sturdy cast aluminum and cuts either (A) ¾" wide tails, 1⅛" on center or (B) 1" wide tails, 2" on center. After a one time setup, simply clamp the jig in place on each board, and rout the pins and tails. Dovetail unlimited board length, and by shifting the jig, you can create variable spaced or extra wide dovetails. The FREE 5⁄8" Router Guide Bushing works with any router that has a router baseplate with a 13/16" center hole. Also include two FREE ½" shank router bits. A 15" Small Template Set 415-8712 If Sep. $199.95 $49.99 B 16" Large Template Set 415-8713 If Sep. 199.95 49.99

24

Dovetail Bits

Built for function and production Designed with high radial and axial relief angles to give you extra clean, sharp edges. Use for shelf supports, finger pulls, drawer glue joints, sliding joints for drawers, table and leg extensions, and dividers. All bits two flute, carbide tipped. See more dovetail bits with top bearings plus value saving sets @ www.EagleAmerica.com



Through

Half-Blind

Variably Spaced

A L

D

Drawer Runners

Sliding

D A L OAL Shank ¼” 7½° 5⁄16” 2½” ¼” 134-0402 $19.95 P13-2201 $7.50 ¼” 7½° ¼” 2¼” ½” — — P13-2202 8.00 ¼” 8° ¼” 2¼” ¼” 134-0412 19.95 P13-2203 7.50 5⁄16” 8° 3⁄8” 2¼” ¼” 134-0522 19.95 P13-2206 7.50 5⁄16” 9° 3⁄8” 2¼” ¼” 134-0502 19.95 — — 5⁄16” 9° 3⁄8” 2¼” ½” — — P13-2205 8.00 3⁄8” 8° ½” 23⁄8” ¼” 134-0602 19.95 P13-2207 9.00 3⁄8” 9° 3⁄8” 2” ¼” 134-0612 19.95 P13-2208 7.50 3⁄8” 9° 3⁄8” 2½” ½” 134-0615 20.95 P13-2209 9.50 3⁄8” 14° 3⁄8” 2” ¼” 134-0622 19.95 P13-2211 9.00 3⁄8” 14° 3⁄8” 2¼” ½” — — P13-2200 9.50 7⁄16” 8° 5⁄8” 23⁄8” ¼” 134-0702 20.95 P13-2228 9.50 7⁄16” 8° 5⁄8” 23⁄8” 8mm 134-0703 24.95 — — ½” 8° 13⁄16” 2¾” ¼” 134-0832 21.95 P13-2234 9.50 ½” 8° 13⁄16” 2¾” 8mm 134-0833 25.95 P13-2216 12.00 ½” 8° 13⁄16” 3” ½” — — P13-2215 10.00 ½” 10° 5⁄8” 2½” ¼” 134-0852 20.95 P13-2236 9.50 ½” 10° 5⁄8” 2½” 8mm 134-0853 24.95 P13-2217 12.00 ½” 10° 5⁄8” 25⁄8” ½” 134-0855 21.95 P13-2229 9.50 ½” 14° ½” 2” ¼” 134-0802 19.95 P13-2232 6.50 ½” 14° ½” 23⁄8” ¼” 134-0842 20.95 P13-2235 7.00 ½” 14° ½” 23⁄8” 8mm 134-0843 24.95 P13-2221 12.00 ½” 14° ½” 2½” ½” 134-0805 21.95 P13-2213 7.50 ½” 18° 3⁄8” 2¼” ¼” 134-0812 20.95 P13-2214 9.50 ½” 18° 3⁄8” 2¼” 8mm 134-0813 24.95 P13-2222 12.00 17⁄32” 7° ¾” 29⁄16” ¼” — — P13-2224 9.50 17⁄32” 7° ¾” 2½” ½” * 134-0915 22.95 * P13-2250 10.50 17⁄32” 14° ½” 2” ¼” 134-0902 21.95 P13-2249 9.50 9⁄16” 7° 1” 25⁄8” ¼” — — P13-2226 9.50 5⁄8” 7° 7⁄8” 25⁄8” ½” 134-1005 24.95 P13-2219 10.50 5⁄8” 14° 5⁄8” 23⁄8” ½” — — P13-2231 10.50 11⁄16” 8° 1” 3” ½” 134-1115 24.95 P13-2220 12.00 134-1215 25.95 P13-2238 11.00 ¾” 7° 7⁄8” 25⁄8” ½” ¾” 14° ¾” 23⁄8” ¼” — — P13-2248 9.50 ¾” 14° ¾” 3” ½” 134-1205 24.95 P13-2237 10.00 13⁄16” 8° 1¼” 3¼” ½” 134-1305 25.95 P13-2225 11.00 7⁄8” 7° 7⁄8” 2½” ½” • 134-1405 27.95 — — 1” 14° 7⁄8” 2½” ½” 134-1605 31.95 P13-2227 11.50 1” 45° ¼” 1¾” ¼” 134-1612 24.95 P13-2242 12.00 1” 45° ¼” 2¼” ½” 134-1615 25.95 P13-2243 13.00 *= for Porter Cable Jig, •= for stair treads See more dovetail bits and sets at EagleAmerica.com.

Edge Forming Architectural Molding Bits

See Boxed 10 Piece Molding Set on page 35! Save money by making your own moldings. Great for architectural millwork including: Don't stand stock base and cabinet moldings, window sills, on edge! See the casings, baseboards, chair rail, door casings, Horizontal Table on page 85. panel moldings, and picture frames. Many profiles are reversible and are functional in either direction. All bits two flute, carbide tipped. All profiles shown are full size. All bits ½" shank. More profiles at EagleAmerica.com

✓ VALUE SET! D B L

B

A

C

✓ VALUE SET!

G C

E

D

✓ VALUE SET!

✓ VALUE SET!

F

✓ VALUE SET!

H

✓ VALUE SET!

“FLIP-IT” Shutter Bit

I

K

J



“FLIP-IT” turn the page For Another View

“FLIP-IT”

O

P

SAVE 30% ✓

M

L



L

N

B

C D A 5⁄8” 1¾” 11⁄8” ¼” 174-2805 $69.95 — — B ¼” 1” 1” 5⁄16” 175-1605 41.95 P14-3577 $34.00 C 5⁄16” 11⁄8” 15⁄8” ¼” 175-0305 41.95 P14-3569 34.00 D 3⁄16” 7⁄8” 15⁄8” 5⁄16” 175-0205 41.95 P14-3567 34.00 E ¼” 1” 15⁄8” ¼” 175-0505 46.95 P14-3571 34.00 F 3⁄16” 7⁄8” 17⁄8” ¼” 175-0815 49.95 — — G 9⁄16” 1¾” 13⁄16” ½” 176-1615 62.95 — — H ½” 13⁄8” 15⁄8” ¼” 175-1625 69.95 P14-3565 34.00 I 13⁄32” 15⁄16” 21⁄8” 7⁄16” 175-0135 64.95 P14-3573 42.00 J 7⁄16” 13⁄8” 17⁄8” - 175-0605 64.95 P14-3572 42.00 K ½” 1½” 2” - 175-0735 64.95 P14-3564 42.00 L ½” 1½” 2” - — — P14-3576 42.00 M 9⁄16” 15⁄8” 2” ¼ — — P14-3575 42.00 N ¼” 1” 13⁄8” - — — P14-3570 34.00 O 13⁄16” 2” 1¼” - — — P14-3638 40.00 P 3⁄16” 1” 13⁄8” 5⁄16” — — P14-3566 34.00

6-Piece Value Sets (Includes bits A to F) If Sep. Set 199-7505 Just $33.33 per bit! $292.70 $199.99

www.EagleAmerica.com / 1-800-872-2511

25

Now a proud distributor of MLCS Router Bits, a provider of quality router bits for 30 years!

Edge Forming Table Edge Profiles All bits two flute, carbide tipped with bearing guides.

Handrail Undercut Bits

D L C

D

Save $$$ by making your own handrails Use these bits to form the under-cut portion of a handrail. Finish the top portion with almost any edge forming bit on left. All bits two flute, carbide tipped, with bearing guides, ½" shank. D C

A, B, C

C

L L

F

E

A B

L

C

Case Molding

I

H

¼”R

D L

¼” R

G

“Grab-It” Handrail

¼” R



C

A 7⁄16” A 7⁄16” B 1” C 1” D 1” E 1” F 1” G 7⁄16” H 1” I 7⁄8”

L

D

Shank 3⁄8” 13⁄8” ¼” 174-2002 $37.95 — — 3⁄8” 13⁄8” ½” 174-2005 37.95 P14-3547 $20.00 ¾” 2½” ½” 174-4005 69.95 — — ¾” 2½” ½” 174-4055 69.95 P14-3559 35.00 1” 2½” ½” 174-4085 84.95 — — ¾” 2½” ½” 174-4025 69.95 P14-3557 35.00 ¾” 2½” ½” 174-4045 69.95 P14-3558 35.00 3⁄8” 13⁄8” ½” 174-2015 39.95 P14-3496 20.00 ¾” 2½” ½” 174-4015 69.95 P14-3556 35.00 ¾” 2¼” ½” 174-4035 69.95 — —

Wavy Edge

D

Two flute, carbide tipped with bearing guides. USA

L C

L R D C OAL Shank 3⁄8” ¾” 1⁄8” 1¼” 2¼” ¼” 169-2802 $36.95 3⁄8” ¾” 1⁄8” 1¼” 2½” ½” 169-2805 36.95

Beauty Mold

Two flute, carbide tipped, bearing guide. USA

D

R

L1 L1 L2 L2

D RR D L1 L1 L2 L2 OAL Shank 1⁄8” 11⁄8” 1” ½” 2¾” ½” 164-2105 $49.95

26

C

C

L

D

Wall Mount

D

A 5⁄16” 1½” 1¼” 174-9015 $69.95 P18-3561 $35.00 B 3⁄8” 2” 1¼” 174-9055 74.95 — — C 9⁄16” 21⁄8” 15⁄8” 174-9025 84.95 — — D -- ¾” 1½” 174-9075 59.95 — —

Double Round

All bits two flute, carbide tipped with bearing guides. USA A A B B

R 5⁄32” 5⁄32” 7⁄32” 7⁄32”

D L

A, B

C

R

C L D Shank 5⁄16” ½” 11⁄8” ¼” 169-2702 $36.95 5⁄16” ½” 11⁄8” ½” 169-2705 36.95 7⁄16” 5⁄8” 13⁄8” ¼” 169-2712 39.95 7⁄16” 5⁄8” 13⁄8” ½” 169-2715 39.95

French Traditional Table Edge All bits two flute, L carbide tipped with bearing guides. USA

D

R

C

C L D R Shank 5⁄16” ½” 5⁄8” 1½” ¼” 174-2402 $39.95 5⁄16” ½” 5⁄8” 1½” ½” 174-2405 39.95

Edge Forming Cove and Bead

Roman Ogee

For decorative edges on moldings, signs, plaques, furniture, etc. Two flute, carbide tipped with bearing guides. bearing guides.

Carbide tipped.

D D

L

A, B

A, B, C, D F



R

L

D

Shank

A 1⁄8” 3⁄8” 13⁄16” ¼” 169-0202 $27.95 — B 5⁄32” 9⁄16” 11⁄8” ¼” 169-0302 29.95 P14-3506 B 5⁄32” 9⁄16” 11⁄8” ½” 169-0305 29.95 P14-3507 C ¼” 11⁄16” 1½” ¼” 169-0402 32.95 P14-3508 C ¼” 11⁄16” 1½” ½” 169-0405 32.95 P14-3509 D ½” 5⁄8” 1¾” ½” 169-0805 47.95 — E 3⁄8” 1” 2” ½” 169-0615 52.95 P14-3513 F ½” 1¼” 2½” ½” — — P14-3516

— $16.00 16.00 18.00 18.00 — 26.00 31.00

R

C

L

D

D

C

R

Use to make finger pulls for drawer fronts.

Shank

D L

D

Ogee Fillet

C

L

D

C

Shank

A 1⁄8” 5⁄16” ½” 11⁄8” ¼” 171-1902 $34.95 — — B 5⁄32” 3⁄8” ½” 1¼” ¼” 171-2002 36.95 P14-3531 $20.00 B 5⁄32” 3⁄8” ½” 1¼” ½” 171-2005 36.95 P14-3532 20.00 C 3⁄16” ½” 5⁄8” 1½” ¼” 171-2402 37.95 P14-3528 21.00 C 3⁄16” ½” 5⁄8” 1½” ½” 171-2405 37.95 P14-3529 21.00 D ¼” 9⁄16” ¾” 1½” ¼” 171-2412 38.95 P14-3533 23.00 D ¼” 9⁄16” ¾” 1½” ½” 171-2415 38.95 P14-3534 23.00 Overall Length 17⁄8". Carbide tipped.

D L C

C ½”

L D Shank 5⁄8” 1½” ½” 171-2705

$42.95

Classic Cove Bits

Carbide tipped. With Bearing Kit #196-0611K $5.39

A, B L

R

R

Double Cove and Bead

Shank A 5⁄32” 5⁄16” ½” 11⁄8” ¼” 169-1802 $34.95 A 5⁄32” 5⁄16” ½” 11⁄8” ½” 169-1805 34.95 B ¼” 7⁄16” 9⁄16” 13⁄8” ¼” 169-1902 36.95 B ¼” 7⁄16” 9⁄16” 13⁄8” ½” 169-1905 36.95 C 3⁄16” 3⁄8” 7⁄8” 1¼” ½” 169-2005 35.95 D 5⁄16” 9⁄16” 5⁄8” 15⁄8” ½” 180-2705 41.95

C

C

Carbide tipped.

L

D

C

A, B

R

L

A, B, C, D

The perfect accent edge for drawer fronts. Profile D is ideal for baseboard molding. All bits two flute, carbide tipped with bearing guides. USA



C

R

Classical Pattern

Ogee



R

L

A 1⁄8” ¼” 3⁄8” 11⁄16” ¼” 171-2502 $34.95 B 5⁄32” 5⁄16” ½” 11⁄8” ¼” 171-2512 36.95 B 5⁄32” 5⁄16” ½” 11⁄8” ½” 171-2515 36.95 C ¼” 7⁄16” 5⁄8” 13⁄8” ¼” 171-2602 38.95 C ¼” 7⁄16” 5⁄8” 13⁄8” ½” 171-2605 38.95 D 3⁄8” ¾” 1¼” 2” ½” 178-334 52.95

D

C, E

With Bearing Kit #196-0611K $5.39

R

D

D

R

All bits two flute, carbide tipped with bearing guides. USA

D

A, B

L R

C

Shank A 3⁄16” 7⁄16” 9⁄16” 13⁄8” ¼” 169-2202 $34.95 P14-3630 $19.00 A 3⁄16” 7⁄16” 9⁄16” 13⁄8” ½” 169-2205 34.95 P14-3631 19.00 B ¼” 9⁄16” 11⁄16” 15⁄8” ½” 169-2605 39.95 P14-3632 23.00



R

D

L

Shank

A 5⁄32” 1¼” ½” ¼” 172-1802 $34.95 A 5⁄32” 1¼” ½” ½” 172-1805 34.95 B ¼” 13⁄8” ¾” ¼” 172-2202 36.95 B ¼” 13⁄8” ¾” ½” 172-2205 36.95

www.EagleAmerica.com / 1-800-872-2511

27

Now a proud distributor of MLCS Router Bits, a provider of quality router bits for 30 years!

Edge Forming Roundover and Beading Bits Eagle® roundover bits from 1⁄16" to 1" radius come with a ½" bearing but can be converted to a beading bit with an extra step, simply by changing to a smaller 3⁄8" bearing. Adjust cutter height to vary the upper straight reveal. All bits two flute, carbide tipped, with bearing guides.

Roundover

2-Piece Drop Leaf Table Rule Joint Sets D

L R

Beading

D L Shank R 1⁄16” 5⁄8” ½” ¼” 156-0102 $19.95 P14-3101 $11.00 3⁄32” 11⁄16” ½” ¼” 156-0112 19.95 — — 1⁄8” ¾” ½” ¼” 156-0202 19.95 P14-3102 11.00 1⁄8” ¾” ½” ½” 156-0205 19.95 P14-3103 11.00 5⁄32” 13⁄16” ½” ¼” 156-0212 20.95 — — 3⁄16” 7⁄8” 3⁄8” ¼” 156-0302 20.95 P14-3104 11.00 3⁄16” 1” ½” ½” 156-0305 20.95 P14-3105 12.00 ¼” 1” ½” ¼” 156-0402 20.95 P14-3106 11.00 ¼” 1” ½” ½” 156-0405 20.95 P14-3107 13.00 5⁄16” 11⁄8” ½” ¼” 156-0502 21.95 P14-3108 13.00 5⁄16” 11⁄8” ½” ½” 156-0505 21.95 P14-3109 13.00 3⁄8” 1¼” 5⁄8” ¼” 156-0602 22.95 P14-3110 13.00 3⁄8” 1¼” 5⁄8” ½” 156-0605 22.95 P14-3111 14.00 7⁄16” 13⁄8” 11⁄16” ¼” 156-0702 28.95 P14-3113 14.00 7⁄16” 13⁄8” 11⁄16” ½” 156-0705 28.95 — — ½” 1½” ¾” ¼” 156-0802 29.95 P14-3114 15.00 ½” 1½” ¾” ½” 156-0805 29.95 P14-3115 15.00 9⁄16” 15⁄8” ¾” ½” 156-0905 36.95 — — 5⁄8” 1¾” 7⁄8” ½” 156-1005 44.95 P14-3116 17.00 ¾” 2” 1” ½” 156-1205 47.95 P14-3117 21.00 7⁄8” 2¼” 11⁄8” ½” 156-1405 83.95 — — 1” 2½” 15⁄16” ½” 156-1605 92.95 P14-3119 30.00 11⁄8” 3” 1½” ½” 156-1805 114.95 — — 1¼” 3¼” 1¾” ½” 156-2005 119.95 P14-3121 39.00 13⁄8” 3½” 1¾” ½” 156-2205 134.95 — — 1½” 3¾” 17⁄8” ½” 156-2405 139.95 P14-3123 46.00 Roundover & Beading Value Sets Include Roundover Bits PLUS a 3⁄8” Bearing to Convert to Beading Profile 4 Bits ¼” shank, Includes: 1⁄8”, ¼”, 3⁄8”, ½” Radius 100-5642 If Sep $99.19 Set $84.99 4 Bits ½” shank, Includes: 1⁄8”, ¼”, 3⁄8”, ½” Radius 100-5645 If Sep $99.19 Set $84.99 4 Bits ½” shank, Includes: ¼”, 3⁄8”, ½”, ¾” Radius 100-5625 If Sep $127.19 Set $104.99 6 Bits ¼” shank, Includes: 1⁄8”, 3⁄16”, ¼”, 5⁄16”, 3⁄8”, ½” Radius 100-5662 If Sep $142.09 Set $115.99 6 Bits ½” shank, Includes: 1⁄8”, 3⁄16”, ¼”, 5⁄16”, 3⁄8”, ½” Radius 100-5665 If Sep $142.09 Set $115.99

Beading Conversion Kit

Converts Eagle® roundover bits from 1⁄16" to 1" radius to beading bits. Kit includes 3⁄8" bearing and allen key wrench.

28

For ¾" material. Includes matching ½" radius roundover and cove bits.

196-0611K $5.39

Shank If Sep. Set If Sep. Set ¼” 100-5462 $58.90 $52.99 P10-1021 $30.00 $26.00 ½” 100-5465 58.90 52.99 P10-1022 31.00 26.50

Mini Brass Piloted Bits

For tight spaces! No hand sanding needed. Get a consistently smooth edge every time. Roundover bits from 1⁄16" to 3⁄8" radius. Chamfer style available. All bits are ¼" shank, two flute, carbide tipped and feature L a small 5⁄32" brass R pilot instead of a Brass ball bearing guide. Pilot

D

Roundover Brass Piloted D L R 1⁄16” 13⁄32” 7⁄16” ● 159-0102 $21.95 P14-3196 $16.00 1⁄8” 7⁄16” 3⁄8” ● 159-0202 22.95 P14-3197 16.00 ¼” 11⁄16” ½” ● 159-0402 23.95 P14-3198 17.00 3⁄8” 15⁄16” 5⁄8” 159-0602 24.95 P14-3199 19.00 3-Piece Roundover Brass Piloted Value Sets If Sep. Set ● 100-5903 $68.85 $59.99 Chamfer Brass Piloted Bit D L 11⁄8” ½” P14-3194 $19.00

Eagle “BIG STEP” Beading Bit Kits

More than just a beading bit! Common beading bits cut a shallow 1⁄16" bead. Our “Big Step” bits feature a large diameter that will produce a roundover profile as well as beaded edge up to 3⁄16" deeper. Kits include bit with 3⁄8", ½", 5⁄8", ¾" bearings and hex key wrench. All bits two flute, carbide tipped, bearing guide, ½" shank. USA

¾” Bearing Profiles are shown with ½” radius bit.

5⁄8” Bearing ½” Bearing 1⁄8” Bead 1⁄16” Bead

3⁄8” Bearing 3⁄16” Bead

R If Sep. Set ¼” 100-5845 $49.32 $36.95 R 3⁄8” 100-5865 51.32 39.95 ½” 100-5885 53.32 41.95 3-Piece Value Set Includes all 3 bits w/ all 4 bearings and hex key wrench 100-5895 121.22 99.99

Edge Forming Bull Nose Bits

Cove Bits

Round both sides in one operation Make beautiful stair treads, shelves, or window sill trim. All router bits are two flute, carbide tipped. L To see our Bull Nose Value sets visit EagleAmerica.com

B

D

B L D Shank 3⁄16” ½” ¾” ¼” 160-0302 $28.95 — — 3⁄16” ½” ¾” ½” 160-0305 28.95 — — ¼” 9⁄16” 7⁄8” ¼” 160-0402 29.95 *P14-3203 $13.00 ¼” 5⁄8” 7⁄8” ½” 160-0405 29.95 *P14-3204 14.00 3⁄8” 7⁄8” 1” ¼” 160-0602 32.95 *P14-3205 16.00 3⁄8” 7⁄8” 1” ½” 160-0605 32.95 *P14-3206 16.00 ½” 1” 11⁄8” ¼” 160-0802 39.95 *P14-3207 16.00 ½” 1” 11⁄8” ½” 160-0805 39.95 P14-3208 16.00 5⁄8” 1” 1¼” ½” 160-1005 47.95 P14-3209 17.00 ¾” 1¼” 15⁄8” ¼” — — *P14-3202 18.00 ¾” 1¼” 15⁄8” ½” 160-1205 57.95 *P14-3210 18.00 7⁄8” 1½” 17⁄8” ½” 160-1405 62.95 — — 1” 13⁄8” 115⁄16” ½” 160-1605 66.95 P14-3212 20.00 11⁄8” 15⁄8” 115⁄16” ½” 160-1805 75.95 *P14-3214 28.00 1¼” 1¾” 23⁄16” ½” 160-2005 79.95 P14-3215 30.00 1½” 17⁄8” 27⁄16” ½” 160-2405 119.95 *P14-3216 34.00 * See EagleAmerica.com for specs on these MLCS bits

Double Corner Round Assembly

Round both top and bottom in just one pass! Assembly (A) comes A B 3/16” with a 7⁄8" bearing. Order optional ½" (#196-0820) or 5⁄8" R ¼” (#196-1020) bearing B B for beading effect. Bit (B) allows you to cut either a 3⁄16" or ¼" radius. All bits D 2-flute, carbide D tipped with bearing Cuts both 3⁄16” and ¼” guides, ½" shank. USA

For drawer fronts, cabinet doors, furniture pieces, dropleaf table joints and molding trim. Features an upward shear angle for more efficient and smoother cutting. All bits two flute, L carbide tipped, with bearing guides.

D

R

Make Door or Drawer Pulls

R D L Shank 1⁄8” 5⁄8” ½” ¼” 154-0202 $23.95 P14-2901 $11.00 3⁄16” 7⁄8” ½” ¼” 154-0302 24.95 P14-2902 11.00 ¼” 1” ½” ¼” 154-0402 25.95 P14-2904 13.00 ¼” 1” ½” ½” ●▲154-0405 25.95 P14-2905 13.00 5⁄16” 1” ½” ¼” 154-0502 26.95 P14-2906 14.00 5⁄16” 1” ½” ½” 154-0505 26.95 P14-2907 14.00 3⁄8” 1¼” ½” ¼” 154-0602 27.95 P14-2908 14.00 3⁄8” 1¼” ½” ½” ●▲154-0605 27.95 P14-2909 15.00 ½” 1½” 5⁄8” ¼” 154-0802 28.95 P14-2910 16.00 ½” 1½” 5⁄8” ½” ●▲154-0805 28.95 P14-2911 16.00 5⁄8” 1¾” ¾” ½” ▲154-1005 42.95 P14-2912 21.00 ¾” 2” 7⁄8” ½” ▲154-1205 48.95 P14-2913 26.00 1” 2½” 1” ½” 154-1605 74.95 — — Cove Bit Value Sets 3-Piece Set ½” shank, Includes: ¼”, 3⁄8”, ½” Radius ●100-5425 If Sep. $82.85 Set $69.99 5-Piece Set ½” shank, Includes: ¼”, 3⁄8”, ½”, 5⁄8”, ¾” Radius ▲100-5455 If Sep. $174.75 Set $129.99

Oval Edge or “Fingernail”

Cuts an oval or crescent shape. All bits two flute, carbide tipped, ½" shank.

C

L B

Radius with just one bit!

D

B B Range Minimum With Without R D Bearing Bearing A 1⁄8” 11⁄8” 17⁄32” - 15⁄8” ¼” 157-0245 $46.95 A 3⁄16” 1¼” 21⁄32” - 15⁄8” 3⁄8” 157-0345 47.95 A ¼” 13⁄8” 25⁄32” - 15⁄8” ½” 157-0445 48.95 B 3⁄16” & ¼” 13⁄8” 21⁄32” - 1½” 3⁄8” 157-0605 69.95

B ½” 5⁄8” ¾” 7⁄8” 1” 1½”

C L D 1⁄8” 1” ¾” 161-0805 $29.95 P14-3218 $15.00 13⁄64” 31⁄32” 1” — — P14-3219 16.00 3⁄16” 1¼” 1” 161-1205 37.95 P14-3220 18.00 5⁄32” 1¼” 1¼” 161-1405 40.95 — — 3⁄16” 1¼” 1” 161-1605 44.95 P14-3222 19.00 ¼” 1¾” 1¼” 161-2405 52.95 P14-3223 21.00

www.EagleAmerica.com / 1-800-872-2511

29

Edge Forming

Now a proud distributor of MLCS Router Bits, a provider of quality router bits for 30 years!

Square Edge Beading

V-Groove Face Frame Joining Bit

Also known as a “Quirk” bead. Note: Two passes are required to form a completely rounded corner bead. All square edge beading bits are two flute, carbide tipped with a bearing guide.

Give your cabinet doors a professional look. Join frames from 1¼" and up. Secure with glue, brads or pocket hole screws. Want a more decorative look? Add a beading profile to the edges before glue up for a decorative mitered corner look. Two flute, carbide tipped.

L

B

D L C

C

Double Pass

Single Pass

B C L Shank 1⁄8” 3⁄16” 9⁄16” ¼” 163-0202 $26.95 P14-3304 $15.00 1⁄8” 3⁄16” 9⁄16” ½” ● 163-0205 26.95 P14-3305 16.00 3⁄16” 3⁄16” 9⁄16” ¼” 163-0302 27.95 P14-3316 15.00 3⁄16” 3⁄16” 9⁄16” ½” ● 163-0305 27.95 P14-3317 16.00 ¼” 3⁄16” 9⁄16” ¼” 163-0402 29.95 P14-3306 16.00 ¼” 3⁄16” 9⁄16” ½” ● 163-0405 29.95 P14-3307 17.00 5⁄16” ¼” 5⁄8” ¼” 163-0502 31.95 P14-3308 17.00 5⁄16” ¼” 5⁄8” ½” 163-0505 31.95 P14-3309 17.00 3⁄8” ¼” ¾” ¼” 163-0602 33.95 P14-3310 17.00 3⁄8” ¼” ¾” ½” 163-0605 33.95 P14-3311 20.00 ½” ¼” ¾” ¼” 163-0802 35.95 P14-3312 19.00 ½” ¼” ¾” ½” 163-0805 35.95 P14-3313 21.00 5⁄8” 7⁄16” 1” ½” 163-1005 44.95 — — ¾” ½” 11⁄8” ½” 163-1205 47.95 — — Square Edge Value Set Shank If Sep. Set 3-Piece Set ½” ●100-6305 $84.85 $69.99

Rounded Edge Beading

Features a soft radius shoulder. All bits two flute, carbide tipped with bearing guide. USA

L Shank C D 5⁄8” 13⁄8” 1” ½” — NEW! P18-3636 $42.95 ¾” 15⁄8” 9⁄16” ½” ● 179-3325 $54.95 — — ½” shank Square Edge 3⁄16” Beading Bit (details at left) ● 163-0305 27.95 P14-3317 16.00 Save! Buy Both Bits, 2-Piece Value Set If Sep. Set ● 100-7925 $82.90 $69.99

Full Bead Assembly

Accent round or square legs and moldings. Makes an attractive bead on beams and post railings. All bits two flute, carbide tipped with two bearings D as shown. USA C L

A



L

Shank 164-2022 $34.95 164-2032 36.95 164-2042 41.95 164-2062 47.95

Designed for larger decorative edge beads and edge banding. You’ll also find these bits handy for making tenoning stock which can be inserted into a A mortise made with a standard drill bit. All bits two flute, carbide tipped, with bearing guides.

R

R B D L Shank 1⁄16” 1⁄8” 5⁄8” 7⁄16” ¼” 162-0602 $39.95 1⁄16” 1⁄8” 5⁄8” 7⁄16” ½” ● 162-0605 39.95 1⁄8” ¼” ¾” 9⁄16” ½” ● 162-1305 40.95 5⁄32” 5⁄16” 13⁄16” ¾” ¼” 162-1602 41.95 5⁄32” 5⁄16” 13⁄16” ¾” ½” ● 162-1605 41.95 Save! 3-Piece Rounded Edge Beading Value Set If Sep. Set ½” Shank ●100-6205 $122.85 $99.99

30

D

Multi-Bead Tenoning, Fluting & Reed Bits



A A B C C

R

R

A 1⁄8” 7⁄8” 3⁄8” ¼” B 3⁄16” 1” ½” ¼” C ¼” 11⁄8” 5⁄8” ¼” D 3⁄8” 13⁄8” 7⁄8” ¼”

D L B

B

A

C B

D



B

D

L

D

B

Shank

L

B

A 3⁄16” 13⁄16” ¾” ¼” 164-2902 $39.95 — — B ¼” 7⁄8” 1” ¼” 164-3002 42.95 P14-3414 $25.00 B ¼” 7⁄8” 1” ½” 164-3005 42.95 P14-3415 25.00

Edge Forming Chamfer Bits

For edge forming, laminate trimming, and glue joining The perfect bit to make multi-sided boxes, planters, A columns or beams. All bits two flute carbide tipped, with bearing guides. 11¼° 16 Sides

Colonial Stop / Shoe Mold

D L

B

L C

45° 4 Sides

C

With Optional 3/8” Bearing #196-0611K $5.39

L

30° 6 Sides

D

B

15° 12 Sides

D

22½° 8 Sides

A

Makes an attractive edge molding and door stop. Use to cap off standard square baseboard trim. Also makes the perfect accent edge for small table tops or desks. All bits two flute, carbide tipped with bearing guide.

C

D L

D C

A B L D Shank 7° 7⁄16” 3⁄8” 9⁄16” ¼” 117-0902 $19.95 — — — 11¼° 1” 15⁄16” 7⁄8” ½” 152-1105 32.95 — 15° 5⁄16” ¼” 5⁄8” ¼” 117-0912 19.95 — — 15° 1” 15⁄16” 1” ½” 152-0205 29.95 P14-2817 $21.00 22½° 7⁄8” 13⁄16” 1¼” ½” 152-0305 30.95 P14-2802 21.00 25° 9⁄16” ½” 15⁄16” ¼” 152-0402 19.95 — — 30° 7⁄8” ¾” 17⁄8” ½” 152-0505 31.95 P14-2800 20.00 45° 3⁄8” 9⁄32” 1” ¼” — — P14-2815 12.75 45° 5⁄8” 7⁄16” 13⁄8” ¼” 152-0612 26.95 P14-2806 15.00 45° 5⁄8” 7⁄16” 17⁄16” ½” 152-0625 27.95 P14-2807 16.00 45° 7⁄8” 11⁄16” 1¾” ½” 152-0645 35.95 P14-2809 18.00 45° 11⁄16” 13⁄16” 2” ½” 152-0655 37.95 P14-2811 22.00 45° 13⁄8” 11⁄16” 2½” ½” — — P14-2810 29.00 45° 1½” 11⁄16” 2½” ½” 152-0685 65.95 — — See EagleAmerica.com for more Chamfer router bits

D L C



D

L

Shank 169-2015 $49.95 169-0625 44.95 169-0705 42.95 169-0502 42.95 169-0505 42.95

Decorative Plunge Cutting Bits Accent your next project Great for sign making as well as creating a raised panel look on solid doors. All bits two flute, carbide tipped. USA

Flute and Bead /Canoe Router Bit Sets

Two Piece Sets B 2 flute, carbide tipped, flute and bead router bits are perfect for making cedar strip canoes, hot tubs, planters, etc. Make tight sealed fitting edge joints on curved surfaces. Router bits P13-2341 and P13-2342 are designed for use on ¼" thick slats. P13-2343 is for 5/16" - 3/8" slats.

C

A 5⁄8” 1¾” 11⁄16” ½” B ¾” 2” 5⁄8” ½” C 5⁄8” 1¾” 11⁄16” ½” D 5⁄8” 1¾” ½” ¼” D 5⁄8” 1¾” ½” ½”

D

L R

A

A

B

D

C

E

D B Shank Slat Size 1½” ¼” ¼” ¼” thick slats P13-2341 $29.95 1½” ¼” ½” ¼” thick slats P13-2342 35.95 1½” 3⁄8” ½” 5⁄16”- 3⁄8” thick slats P13-2343 38.95

D

A 3/4” A 13/8” B ½” B 7/8” B 7/8” B 11/8” C 5/8” C 7/8” D 7/8” E 3/4” F 11/8”

D

F

A L R Shank 5/16” 13/32” 7/64” ¼” 139-1802 $29.95 ½” 9/16” 13/64” ½” 139-1825 42.95 1/8” ¼” 1/8” ¼” 138-0802 23.95 3/16” ½” 3/16” ¼” 138-1402 24.95 3/16” ½” 3/16” ½” 138-1405 25.95 3/8” ½” 3/16” ½” 138-1415 29.95 ¼” ½” 1/8” ¼” 139-0922 27.95 3/8” 7/16” 3/16” ¼” 139-0942 30.95 3/8” ½” 3/16” ½” 139-0965 31.95 3/8” ½” 1/8” ¼” 139-0902 28.95 5/8” ½” 3/16” ½” 139-0675 36.95

www.EagleAmerica.com / 1-800-872-2511

31

Box Making Box Side Bits

Here are the bits you’ve been asking for. Perfect for making music, keepsake and jewelry boxes. Just add a foot base to it and your project is complete. Also makes a great molding bit. All bits two flute, carbide tipped with bearing guides, ½" shank. USA

A

Keepsake Box made with Value Set #1

FREE project plans included!

B

Keepsake Box Value Sets Free project plans included. L

L

✓

C

C

D

L

A 5⁄16” 1¼” 23⁄8” B ½” 13⁄8” 2½”

Shank ½" 175-1405 $72.95 ½" 175-1425 84.95

Includes Box Side bit (at left) plus...

...Ogee Bracket Foot Molding bit (lower left, row "C")

Ogee Bracket Foot Molding

Give your boxes a distinctive look Put your jewelry boxes on a pedestal and give them a new sense of stature. After you’ve made a few cutlery boxes with this bit, you’re sure to be getting orders for more! All bits two flute, carbide tipped with bearing guide.

Set #2

Includes Box Side bit (at left) plus...

D



✓

Set #1

C

C

L

...Ogee Bracket Foot Molding bit (lower left, row "C")

Keepsake Box Value Sets #1

Keepsake Box Value Sets #2

✓

✓

Includes bits #175-1405 and #175-1105 (see at left). Save $26! If Sep. $145.88 199-1406 Set $119.99

D

Includes bits #175-1425 and #175-1105 (see at left). Save $28! If Sep. $157.88 199-1426 Set $129.99

Furniture / Box Maker Bit



Shank A ¾” ¾” 1⁄8” ¼” 175-1122 $45.95 P14-3591 $33.95 A ¾” ¾” 1⁄8” ½” 175-1125 46.95 P14-3530 34.95 B 7⁄8” 1” 3⁄16” ½” 175-1135 49.95 P14-3592 35.95 C 11⁄8” 1¼” ¼” ½” 175-1105 59.95 P14-3593 37.95 D 11⁄8” 2” 5⁄16” ½” 175-1115 64.95 P14-3589 41.95

32

D

L

C

Mills the classic oval shape found in many fine furniture arms, legs and boxes. Two flute, carbide L tipped, bearing guide, ½" shank.

L

D

R

D

A R

B C

A ¾” 1” 1¾” 162-2005 $42.95 P14-8591 $20.00 B 1¼” 11⁄8” 3” 162-2015 49.95 P14-8592 23.00 C 1½” 1½” 2½” 162-2025 54.95 — —

Box Making Box Joint Bit

Make perfect and beautiful box joints! Strong, decorative box joints are ideal for jewelry box drawers, humidors and more. The long ½" arbor holds five (5⁄32") three-wing carbide tipped slot cutters, four spacers and a ball bearing guide. The bearing is L designed for ½" depth of cut, but make shallower cuts by adjusting the router fence. For stock up to ½". Use in a router table only. See Eagle Box Joint Bit kits on P. 19.

Plunge Ogee Bracket Foot Mold

D

L D Shank 17⁄8” 17⁄16” ½” P15-7860 List $99.99

Flocking

$49.95

Add that finished touch to your next project Suede-Tex fibers have the appearance and feel of felt without the extra cost. The specially treated fibers A resist fading and are a great way to line jewelry boxes, drawers, or repair worn out lamp C B and vase bottoms. Quick and easy to use! Simply apply undercoat adhesive with a brush or roller, dispense matching color fibers with our Mini Flocker or Air Assisted Flocking Gun and allow to dry. Three ounces of Suede-Tex Fiber and eight ounces of adhesive covers 12-15 sq. ft. Color Size 2+ ea. Fibers Red 3 oz. 497-1741 $12.99 $12.49 Fibers Kelly Green 3 oz. 497-1742 12.99 12.49 Fibers Medium Blue 3 oz. 497-1743 12.99 12.49 Fibers Wine 3 oz. 497-1744 12.99 12.49 Fibers Black 3 oz. 497-1745 12.99 12.49 Fibers Brown 3 oz. 497-1746 12.99 12.49 Adhesive Red 8 oz. 497-1731 12.99 12.49 Adhesive Kelly Green 8 oz. 497-1732 12.99 12.49 Adhesive Medium Blue 8 oz. 497-1733 12.99 12.49 Adhesive Wine 8 oz. 497-1734 12.99 12.49 Adhesive Black 8 oz. 497-1735 12.99 12.49 Adhesive Brown 8 oz. 497-1736 12.99 12.49 A Mini Flocker Gun 497-1710 6.99 B Air Assist Spray Gun 497-1712 69.99 C Air Assist Canister 497-1713 9.99

The perfect accent for larger pieces Want to make really BIG feet with your router? Here’s our answer. Ideal for hope chests, entertainment units, bedroom furniture or any other piece where large foot molds are desired. Simply select a plunge bit below and finish off with any standard matching radius roundover bit. All bits two flute, carbide tipped. USA

D

C R

D R C Shank 5⁄8” 2¼” 5⁄8” ½" 175-1145 $57.95 ¾” 25⁄8” ¾” ½" 175-1155 64.95 7⁄8” 31⁄8” 7⁄8” ½" 175-1185 69.95

Bracket Foot Molding Bit Run length needed and miter corners together. Two flute, carbide tipped, with bearing guide. USA

L

C D

L C D Shank 13⁄8” 2” ½” ½” 175-1165

PSA Backed Felt Sheets Each sheet measures 12" x 36". Felt has a peel and stick backing. Easily cut to fit your needs.

$77.95

SALE $9.99!

each

497-1760 Black 497-1764 Blue 497-1761 Brown 497-1762 Green 497-1765 Red 497-1763 White 497-1766 Wine $9.99 each SALE!

www.EagleAmerica.com / 1-800-872-2511

33

U2U2

U2U2 Crown Molding Wide Crown Molding System

Create your own moldings up to 5½" wide Used in combination you can make trim up to 5½" wide. Mix or match to produce up to 14 different profile designs. All bits two flute, carbide tipped with anti-kickback design, ½" shank.

1

Wall - Wall - Wall - Wall - Wall - Wall

Ceiling - Ceiling - Ceiling - Ceiling - Ceiling -

A

52°

C

B

D

D

D

38°

U1C U1 A B

D

B

F

E

E

D

L3L3

E

E

F E U1 U1

B

F

G

L2

L3L2

L3

F

L1

L1

L

U2 U2

L2L2

U1 U1 U1 U1

E

L2

L3

U2 U2

G

Ceiling - Ceiling - Ceiling - Ceiling - Ceiling -

U1 U1

Reversible Crown Molding Bits

Hung in any direction, they look great! Crafting your own decorative crown moldings is a unique way to stamp your personality on to large furniture pieces or home remodeling projects. B A 2 hp variable speed or greater table mounted Ceiling A router is D recommended. Using a ¾" or greater by 2" board, make multiple passes L adjusting the fence until Ceiling full profile is D achieved. All G flute, U1 bits two U1U1 U1 U2 U2U2 U2 U2 U2 U1 U2 U1 carbide U1L2 U1 L2 tipped, ½" shank.

L3

L3

U2U2

Now a proud distributor of MLCS Router Bits, a provider of quality router bits for 30 years!

L1L1 D

C

G

U2U1

E Reversible Crown Molds

L3 L2 U2 A R3

R3

1 U1

L3 L1 U2 L2 U2

L3 L3 L2 L1 L2 U2B L2 L2U2 U2C R3

R2 L U1 U1 U1 U1

L3

D

L1 L2 UpperL1 L2 L1

L2

U1 U1 U1 U1 U2

L1

L1

U2 U2

U2

L3L2 L1 L3

L2

FL1

L2

E

D

L3 L2 L1 L2 L2

L1

G

L

L2

L3 L3 L2 L1 L1

L2 L1

U1U1 U1 U2 U2 U1

L3 L1 L2 L1

U1 U2 U2U2 U2 U1

L3 D

L

L2

U2U1 U2U2

L2



L2

OAL

A 1¼” 27⁄16” 3¾” 175-2005 $79.95 P14-3578 $39.00 U2 U2 U2 B 1¼” 23⁄8” 4” 175-2045 79.95 P14-3615 39.00 C 1¼” 2½” 4” 175-2055 84.95 — — D 111⁄64” 2¼” 41⁄8” — — P14-3582 39.00 L3 L3 L11¼” L3 2¼” 39.00 L3 L2 L1 L2 L2 L2 L1 L1 L3P14-3579 L3 L1 3¾” L1L2 — L2— L1 L2 EL3

OAL A 2½” 1¼” 4” — — P14-3587 $55.00 B 23⁄8” 1¼” 4” 175-2505 79.95 — — C 2½” 13⁄8” 4” — — P14-3588 55.00 D 3” 15⁄16” 47⁄16” 175-2135 79.95 — — L3 L2 L1 L2 L1 E 3” 1¼” 4½” 175-2145 79.95 — L1 — F 31⁄16” 13⁄8” 49⁄16” 175-2175 84.95 — — G 31⁄16” 13⁄8” 49⁄16” 175-2185 84.95 — —

D

Crown Mold Edge Trim Bit

Perfect installation every time. Features a 38° and 52° bevel cutting edge. Simply adjust your fence to the ball bearing guide and rout the top edge of the molding face down, then flip it over and rout the bottom edge face up. Two flute, carbide tipped, bearing guide. ½" shank. 52°

Router Table -

Router Table -

Router Table

Clips slide over a screw head to support your molding during installation. Package of 4. 471-0541 $5.99 4+ $5.49 ea.

38°

L

D

Crown Molding Clip

34

L2

L2

L2

L1

Lower



L3 L2L1 U2 L2

Router Table -

Router Table -

Router Table

L D OAL 23⁄8” 13⁄8” 213⁄16” 175-2065 $79.95 P14-3670 $59.95

L

Crown and Architectural Molding Horizontal Crown Molding Bits

Chair Rail / Wainscot Bits

D

Make these crown molding trims simply by R pushing the wood over the bit on your router table. Also can be used for fluting large columns and making raised panels. All bits, two flute carbide tipped and ½" shank. Antikickback design. D 1¾” 2¼” 2½” 2¾”

R

13⁄8” 1¾” 2¼” 2¾”

C

5⁄16” 3⁄8” 3⁄8” 3⁄8”

C

L

All bits two flute, carbide tipped and ½" shank. Chair rail and wainscoting bits can make cabinetry trim molding, panel molding, base caps, and L picture frames.

C

A D

C

D

L

D

L

3⁄8” 5⁄8” 5⁄8” 5⁄8”

B

130-2815 $49.95 P14-3625 $24.00 130-3605 62.95 — — 130-4005 69.95 P14-3626 32.00 130-4405 79.95 P14-3627 35.00

C C C L

WINTER

Molding Plane Profile Router Bit Set SAVE $160! Ends 2/28/17. Features 10 classic

SALE

molding plane bits in a wood box. 2 flute, ½" shank carbide tipped, enclosed ball bearing guides. Copied from popular antique molding planes, these bits make architectural millwork, moldings, baseboards, chair rails and picture frames. Combine two or more bits for unlimited profiles. P19-6002 If Sep. $340 $179.95

10 Piece Set includes a Wood Storage Box

L D D

C D L A ½” 1¼” 1” 175-0115 $52.95 — — A ½” 15⁄8” 13/16” — — P14-3594 $34.00 A 9⁄16” 15⁄8” 1¾” 175-0125 57.95 — — B 7⁄16” 1½” 15⁄8” 175-1565 64.95 P14-3603 39.00 C 11⁄16” 17⁄8” 1¾” — — P14-3602 42.00 D 11⁄16” 1¾” 17⁄8” — — P14-3597 42.00

Multi-Form Molding Maker

C

Mill over 40 different profiles Simply by adjusting the cutter height and the fence position, along with two or more passes, the profile possibilities are almost unlimited. Two flute, carbide tipped, ½" shank, with bearing guide. Use with router table only.

L

D

R1

R2

Includes 10 classic molding plane profiles

C D L R1 1 R2 7⁄16” 13⁄8” 1” 1⁄8” 3⁄16” 177-2005 $64.95 — — 7⁄8” 2¼” 17⁄8” ¼” 5⁄16” 177-4005 84.95 P14-3598 $39.95

www.EagleAmerica.com / 1-800-872-2511

35

Specialty Bits Multi-Sided Glue Joints

Train Track Bits

Make interlocking track and form track grooves. Full size track template plans included with complete set. The Double Groover bit (D) with center bearing makes flat straight sections in B C A one pass as well as curved upward sections to create bridges, overpasses or mountains.Two flute, carbide tipped, ½" shank. Detailed “plans and instructions” available at EagleAmerica.com

A

B

C

D

$37.95 23.95 20.95 40.95

14° Butterfly Key Spline

Make strong butterfly spline glue joints, extension table slides and decorative butterfly inlays. Use these bits with our ½” to 1” diameter 14° dovetail bits to cut the splines. Instructions included. All bits two flute, carbide tipped. USA

D

L

B

C A

60° Chamfer Lettering Bits

Create raised and recessed letters These bits will give your signs an attractive, sharp and defined appearance. With Bearing Features a 1⁄8" radius at the flat bottom edge. Two flute, carbide tipped. For D use with SignPro System. ¼" shank. USA L

A

L

A D ½” 1⁄8”

14°

L With Bearing 7⁄16” 133-0802 $23.95 133-0802B $32.75

More? www.EagleAmerica.com

L Spline Size D OAL Shank ½”-11⁄8” ¾” 11⁄8” 2½” ½” 191-1205 $39.95 ½”-2” 1¼” 2” 3½” ½” 191-2005 49.95

Traditional Brick Mold

Use for making larger colonial outer case moldings found around exterior entrances and garage doors. Two flute, carbide tipped. USA

D

Number Max Stock L of Sides Angle Thickness D A 6/12 60°/30° 7⁄8” 17⁄8” 1¼” 190-2865 $41.95 B 8 45°/45° 7⁄8” 1¾” 1” 190-2885 41.95 C 16 67½°/67½° 1” 15⁄8” 1¼” 190-2895 41.95 3-Piece Glue Joints Set 100-9005 If Sep $125.85 Set $114.99

D

A Male Connector Bit P13-2332 B Female Connector Bit P13-2333 C Track Single Groover Bit P13-2334 D Track Double Groover Bit P13-2335

A

A box-makers dream come true Make planters, columns, buckets, bowls, boxes, barrels and other multi-sided Flush projects. Cut stock at the correct angle, for a strong mechanical joint. Cut face up for 6 or 8 sided projects and face Ribbed down for 12 or 16 sided projects. All bits two flute, carbide tipped, ½" shank. USA C B

With Bearing D

Flute Cutter Assembly

Makes column accents Use for column accents, produce fluted chair and table legs, build planters, hot tubs, and canoes. Assembly comes with two B bearings. All bits two flute, carbide B tipped. USA A

A

L2 L1

D 1¼” 1¼”

36

L1 1⁄8” 1⁄8”

L2 OAL Shank Bearing 3⁄8” 21⁄8” ½” No 139-2005 $39.95 3⁄8” 21⁄8” ½” Yes 139-2005B 58.95

A A B B

A B OAL Shank 1⁄8” ¼” 3¼” ¼” 164-1042 $35.95 1⁄8” ¼” 31⁄8” ½” 164-1045 36.95 3⁄16” 3⁄8” 31⁄8” ¼” 164-1062 36.95 3⁄16” 3⁄8” 31⁄8” ½” 164-1065 37.95

Now a proud distributor of MLCS Router Bits, a provider of quality router bits for 30 years!

Chair Making Bits

These uniquely tapered rabbet bits are used to join the arms and legs to the bottoms of elegant rocking chairs and stools. These bits were specially designed to allow you to make the “dovetail” joints. All bits two flute, carbide tipped with bearing guides, A ½" shank. USA

Specialty Bits Wainscoting Router Bit Sets

B D L

C

C

L C Taper D A 5°+ Taper Bit 1” 5⁄8” ¼ 150-1705 $49.95 B 5°- Taper Bit 1” 5⁄8” ¼ 150-1715 49.95 C 0° Taper Bit 1” 5⁄8” ¼ 150-1725 37.95 Save! 3-Piece Set 199-5175 If Sep $137.85 Set $129.99

Wall Bracket Cleat Dovetail

Classical Set

Bracket

Wall

Make cleat brackets to hang heavy mirrors, pictures or quilt racks. Simply cut a 45° support strip the length of the item you wish to hang using a standard 45° chamfer bit and hang it A on the wall. Then, L use this bit to rout D the dovetail cleat recess on the back of the item to be hung. Both bits are two flute and carbide tipped.

Choose “classical” or “ogee” profile ½" shank sets Create a dramatic change to any room, adding style, sophistication, and value to your home with this easy and affordable wainscoting project. Requires only 2 router bits and they’re both included in the sets. Apply directly over existing walls, or over beaded plywood for a more stylish look. These profiles require only a single router bit to create the framing, as the router bit profile will mirror itself when flipped 180°. The Pedestal Molding Bit completes the set, creating an attractive cap rail to transition from the wainscoting to the upper wall. Use with ¾" thick stock. Router bits are ½" shank.

A D L OAL Shank 45° 1” ¼” 1¾” ¼” 134-1612 $24.95 P13-2242 $12.00 45° 1” ¼” 2¼” ½” 134-1615 25.95 P13-2243 13.00

2-Piece Tambour Door Bit Sets

Make beautiful roll top desks, bread boxes and more! Unique interlocking pattern keeps slats aligned. Use for both single and double curve applications. Slats can be mounted over canvas or joined with cable wire. Two flute, carbide tipped, ½"shank. See 15' Door Cable Kit 400-1601 at Eagle America.com.

A

Wainscot Paneling / Beadboard System

For 3⁄8" to 5⁄8" stock Create beautiful wall trim and paneling for backs of bookcases. The 2 piece “V” Tongue and Groove set (A) features a rounded tapered tongue for easy insertion. The extra long 45° Beading Bit (B) allows you to produce a 3⁄16" bead in boards up to 4" wide. All bits, two flute carbide tipped with anti-kickback design, bearing guides, ½" shank. Instructions included.

A

B

L

T

C

45° D

C

A

B

A For 3⁄8” Stock B For 5⁄8” Stock

B

Classical and Pedestal Molding A Save $12.01! P15-8551 If Sep $61.96 Set $49.95 Ogee and Pedestal Molding B Save $8.01! P15-8550 If Sep 55.96 Set 47.95

A



Ogee Set

180-8015 $99.95 — — 180-8005 124.95 P14-3694 $79.95

B

+

D

L

C

T

D

=

OAL

A 1¼” ¾“ 3⁄16” 3⁄32” 2¼” P16-4029 B 1¼” 5⁄8” 3⁄16” - 35⁄8” P16-4046

Save! Set Includes A and B

$59.95 34.95 P10-1631 If Sep $94.90 Set $79.95

www.EagleAmerica.com / 1-800-872-2511

37

SALE!

Shaper Cutters Professional Quality Three Wing Shaper Cutters

• Razor sharp tungsten carbide tipped cutters produce clean, smooth finishes and are suitable for cutting hardwoods, plywood panels, fiberglass or plastics • Features a special coating to prevent rust and resin buildup • Three-wing, anti-kickback safety design • Shaper cutters feature ¾” bores and include ½” bushing adapters to fit both ½” and ¾” spindles • These cutters are designed to be worked under 13,000 RPM

Stile and Rail Cabinet Door Sets

3-Wing Panel Raisers

Anti-kickback safety design. Features 1½"cutting depth and 5⁄8" cutting length, except for 286-8650, which has a ¾" cutting length.

For stock size 11⁄16" to 11⁄8"

A

Our door sets produce; regular stile and rails, glass panel stile and rails, as well as tongue and groove joints. Set includes; stile profile head, rail profile head, ¼" straight, two ½" straights and spacer. Large diameter is 27⁄8". See Eagle America website for optional rub collar.

A

¼”

B

C

3/8”

A Roman Ogee B Round C 15° Shaker Bevel

285-8570 285-8580 285-8590

Regular Sale $199.99 $174.95 199.99 174.95 199.99 179.95

Reversible Combination Stile & Rail Cutter

For stock size 11⁄16" to 7⁄8" An economical way to produce ¼” 3/8” stile and rail cabinet doors. Simply re-arrange the cutters to produce both the stile and rail cuts. For wood thicker than 7/8" rabbet out the bottom of the rail end. Includes reversible profile cutter, groover and rub collar. C ut Length O.D. Regular Sale 15/16” 23/8” 201-8402 $79.99 $69.00 5.2mm Euro Plywood Conversion Kit

38

201-8410 $34.95



A B C D E

B

D

C

E

O.D. Rub Collar Regular Sale 45/8” A 286-8670 $99.99 $71.50 45/8” A 286-8620 99.99 71.50 45/8” A 286-8640 99.99 71.50 45/8” A 286-8660 99.99 71.50 43/8” A 286-8650 99.99 71.50

Stacked Stile and Rail Cutters

For stock size 11⁄16" to ¾" 3 flute, carbide tipped with a 3/4" bore. Supplied with a rub collar. To produce both the stile and the rail cuts, simply raise and lower the Stacked Stile and Rail cutters. Use with the 3-Wing Panel Raisers above to produce raised panel doors.

¼”

A Ogee

¼”

B Shaker

O.D. Cut. Length Regular Sale A Ogee 23/8” 13/8” 201-8404 $109.99 $89.00 B Shaker 23/8” 13/8” 201-8406 109.99 89.00 5.2mm Euro Plywood Conversion Kit

201-8410 $34.95

SALE! Combination Interior / Exterior Entry Door Sets

Edge Banding 2-Piece Set

For stock sizes 1¼" to 1¾". Includes ¼" tongue slot cutter. Rub collar is optional. Convert from interior passage door to exterior entry door with the ½" slot cutter conversion kit. ¼”

Shaper Cutters

Put a finished and durable hardwood edge on your plywood, particle board or MDF stock cabinet doors or shelving. From ½" to 1" thick. Saves money and looks great!

B

A

3/8”

O.D. Rub Collar Regular Sale 25⁄8” D 285-8513 $199.99 $189.95 ½" Slot Cutter Conversion Kit 285-8516 $49.95

¼”

3/8”

A Cut L. B Cut L.

299-9003

11⁄16”

1¼”

A O.D. B O.D. 2¾” 2¾”

Sale $89.95

Rabbeting Miter Joint 2-Piece Set

For ¾" stock. Makes a 45˚ miter rabbet joint that produces a larger glue surface area than a simple miter joint, with precise alignment.

O.D. Rub Collar Regular Sale 31⁄8” E 285-8514 $209.99 $197.95 ½" Slot Cutter Conversion Kit

285-8515 $49.95

299-9004

Undercutter for Raised Panels

Cut L. ¾”

O.D. 25/8”

Sale $99.95

V-Panel 2-Piece Set

Includes rub collar “A”. 1/8” Radius

¼”

Cut. Height O.D. Regular Sale ½” 3½” 286-8685 $75.94 $49.95

Panel Glue Joint

For Stock Cut. L. O.D. Rub Collar Regular Sale ¾” to 7⁄8” 7⁄8” 2¾” A & E 290-9005 $139.99 $120.95

Tongue and Groove 2-Piece Set

Cut D. Cut L. O.D. Rub Collar Regular Sale 3⁄16” 13⁄16” 25⁄8” H 290-9001 $75.94 $43.95

Drawer Glue Joint ½”

Cut Length O.D. Rub Collar ½” 25⁄8” F 282-8202

3/8”

Regular Sale $75.94 $39.95

Mitered Door Frames

Cut. D. Cut. L. O.D. Rub Collar Regular Sale Straight 11⁄32” 1” 25⁄8” D 290-9008 $99.99 $89.95

Flooring 2-Piece Set

Rounded tongue for easy assembly For use with ½" to 1" thick stock. Makes a ¼" tongue. Cut. Length 1”

Features ¾" bore and includes ½" bushing adapter. Doors

Cut Length Cut O.D. Rub Collar Regular Sale 2½” 27⁄8” D 275-3654 $129.99 $89.95

O.D. Regular Sale 25⁄8” 290-9004 $139.99 $89.95

Window Sash

Use with stock that is 1" to 1½" thick. Cut Length O.D. Rub Collar Regular Sale 15⁄8” 29⁄64” Included 290-1024 $109.99 $89.95

www.EagleAmerica.com / 1-800-872-2511

39

SALE!

Shaper Cutters Straights / Rabbeting

Crown Molding

Decorative crown molding looks great hung in any direction. Cut off 45° excess using chamfer bit or table saw. Three wing design.

Three-wing, carbide cutters produce clean, smooth finishes. Features ¾" bore and includes ½" bushing adapter. Cut L. O.D. Regular Sale ¼” 25⁄8” 202-0225 $32.99 $29.95 3⁄8” 25⁄8” 202-0238 35.99 30.95 ½” 25⁄8” 202-0250 39.99 35.95 ¾” 25⁄8” 202-0275 44.99 35.95 1” 25⁄8” 202-0280 46.99 39.95 1½” 25⁄8” 202-0290 54.99 47.95 2” 25⁄8” 202-0297 59.99 54.95

Cut Depth Cut Length O.D. Regular 5⁄32” 23⁄8” 2¾” 275-7523 $139.99

Half Round

Cut Depth Cut Length O.D. A 5⁄16” 2½” 2¾” 275-4405

Crown Molding

Make popular cove molding that is found in home casework projects.

D Features ¾" bore and ½" bushing adapter. D Cut Length O.D. Rub Collar Regular Sale ¼” 9⁄16” 25⁄8” I 260-6025 $35.99 $32.95 3⁄8” 11⁄16” 25⁄8” H 260-6038 44.99 39.95 ½” 13⁄16” 25⁄8” F 260-6050 44.99 39.95

Quarter Round

R Cut Length O.D. Rub Collar ¼” ½” 25⁄8” F 256-5669 3⁄8” 5⁄8” 25⁄8” D 256-5671 ½” ¾” 25⁄8” A 256-5673 ¾” 1” 37⁄8” D 256-5676 1” 1¼” 37⁄8” D 256-5677

Regular Sale $39.99 $29.95 44.99 29.95 49.99 38.95 59.99 39.95 64.99 45.95

Molding Plane Profile

Features ¾" bore and ½" bushing adapter.

Astragal Chair Rail

Three-wing , with ¾" bore and ½" bushing adapter. R ¼”

R

Cut Length O.D. Rub Collar Regular Sale ¾” 25⁄8” A 269-6925 $49.99 $39.95

Flute Cutter

Features ¾" bore and ½" bushing adapters.

R

R Cut Length O.D. Rub Collar 1⁄8” ¼” 25⁄8” I 230-3025 3⁄16” 3⁄8” 25⁄8” H 230-3038 ¼” ½” 25⁄8” F 230-3050 3⁄8” ¾” 25⁄8” D 230-3075



Regular Sale $34.99 $29.95 $34.99 $29.95 $39.99 $32.95 $44.99 $39.95

Table Edge

Forms a decorative edge used on tables, window sills and chair rails. Carbide 11/8” cutters produce clean, smooth finishes. Features ¾" bore and includes ½" bushing adapter. Three-wing, anti-kickback safety design. Special coating prevents rust and resin buildup. Regular $99.99

Features ¾" bore and ½" bushing adapter.

Cut Depth Cut Length O.D. Regular Sale 15⁄64” 1” 35⁄8” 292-9201 $79.99 $72.95

Rub Collars

R

R Cut Length O.D. Rub Collar Regular Sale ¼” 1” 25/8” D 275-0126 $69.99 $49.95

40

Reversible Ogee

45° Lock Miter

Cut Length O.D. Rub Collar Regular Sale 15⁄8” 3” E 290-1027 $109.99 $89.95

Cut Cut Depth Length O.D. 11⁄8” ¾” 3½” 274-4005

Regular Sale $129.99 $89.95

R

Features ¾" bore and ½" bushing adapter.

Features ¾" bore and ½" bushing adapter.

Sale $89.95

Sale $55.95

Eagle America rub collars feature a ¾" bore. Rub Clr O.D. Rub Clr O.D. A 15⁄8” 196-2600 $15.95 F 21⁄8” 196-3400 $18.95 C 121⁄32” 196-2500 15.95 H 2¼” 196-3600 19.95 B 1¾” 196-2800 16.95 I 23⁄8” 196-3800 22.95 D 17⁄8” 196-3000 17.95 J 2½” 196-4000 23.95 E 2” 196-3200 18.95 K 25⁄8” 196-4200 24.95 Save $20.80 5 Piece Rub Collar Set includes “A, C, B, D and E") 196-0003 If Sep. $85.75 Set $64.95 Save $14.80 5 Piece Rub Collar Set includes “F, H, I, J, and K") 196-0005 If Sep. $110.75 Set $95.95 Save $46.95 10 Piece Rub Collar Set includes all rub collars 196-0010 If Sep. $196.90 Set $149.95

Router Essentials Replacement Bearings

35-Piece Router Bit Survival Kit

SALE! New sealed industrial bearings with special lubricants. Designed for high speed R.P.M. usage. A See Euro Square Bearings C B and Top Mounted Bearing kits at EagleAmerica.com

WINTER

A B C Regular SALE! ¼” 1⁄8” 1⁄8” 196-0400 $5.29 $4.00 3⁄8” 1⁄8” 5⁄32” 196-0600 5.29 4.00 3⁄8” 3⁄16” 1⁄8” 196-0611 5.29 4.00 3⁄8” ¼” 1⁄8” 196-0620 5.29 5.00 ½” 3⁄16” 3⁄16” 196-0800 5.29 4.50 ½” ¼” 3⁄16” 196-0810 5.29 5.50 5⁄8” 3⁄16” 3⁄16” 196-1010 5.79 5.50 5⁄8” ¼” 3⁄16” 196-1000 5.79 5.50 5⁄8” 5⁄16” 3⁄16” 196-1020 8.39 6.00 ¾” 3⁄16” 3⁄16” 196-1220 6.29 6.00 ¾” ¼” ¼” 196-1200 6.29 6.00 ¾” 5⁄16” ¼” 196-1230 8.99 6.50 ¾” ½” 1⁄8” 196-1210 10.49 7.00 7⁄8” 3⁄16” 3⁄16” 196-1410 9.49 6.50 7⁄8” 5⁄16” ¼” 196-1400*** 8.39 6.00 7⁄8” ¼” 9⁄32” 196-1450 12.59 7.00 1” 3⁄16” 3⁄16” 196-1600 9.99 7.00 1” ¼” 3⁄16” 196-1610 13.29 9.00 1” ½” 13⁄64” 196-1620 13.29 7.00 11⁄8” 3⁄16” 3⁄16” 196-1820 14.69 9.00 11⁄8” 5⁄16” ¼” ● 196-1810** 14.69 7.00 11⁄8” ½” 5⁄16” 196-1800 9.49 7.50 17⁄32” 3⁄16” 3⁄16” 196-1900 12.99 9.00 1¼” 3⁄16” 3⁄16” 196-2010 13.99 9.00 1¼” 5⁄16” ¼” ● 196-2020* 14.99 7.00 1¼” ½” 3⁄8” 196-2000 15.79 8.50 19⁄32” 3⁄16” 3⁄16” 196-2100 13.99 9.00 13⁄8” 3⁄16” 3⁄16” 196-2200 14.69 9.00 13⁄8” 5⁄16” ¼” ● 196-2220 14.99 7.00 196-2210 15.99 9.00 13⁄8” ½” 5⁄16” 1½” 3⁄16” 3⁄16” 196-2410 15.79 10.00 1½” 5⁄16” ¼” 196-2415 15.99 7.00 1½” ½” 5⁄16” 196-2420 15.99 9.00 15⁄8” 5⁄16” ¼” 196-2610 17.89 8.00 17⁄8” 3⁄16” ¼” 196-3010 16.79 11.00 17⁄8” ½” 5⁄16” 196-3020 18.49 14.00 3-Piece Slot Cutter Adjustment Kit ● 196-0022 $39.99 $18.00 *** #20 Biscuit, ** #10 Biscuit, * #0 Biscuit

LED 4-in-1 Flex Light

Three brilliant LED bulbs and the flexible plastic tube shine brilliant light where you need it. Holds its shape! Stick it – two super strong magnets mount right to most machines. Clamp it – clamp to any surface up to 21/4" thick. Wrap it – extends from 9.5" to 22". Will flex to many shapes. Hang it – A folding hook extends from the base to hang from anything up to 1" dia. Three AAA batteries included. 492-5860 List $29.99 $24.99

SALE Bearing Outside Inside Qty. Item # Dia. Dia. 2 196-0611 3⁄8” 3⁄16” 2 196-0800 ½” 3⁄16” 1 196-0810 ½” ¼” 1 196-1000 5⁄8” ¼” 1 196-1010 5⁄8” 3⁄16” 1 196-1200 ¾” ¼” 1 196-1210 ¾” ½” 1 196-1220 ¾” 3⁄16” 1 196-1400 7⁄8” 5⁄16” 1 196-1410 7⁄8” 3⁄16” 1 196-1800 11⁄8” ½” 1 196-1820 11⁄8” 3⁄16” 1 196-2000 1¼” ½”

SAVE $101! Ends 2/28/17.

Don’t get stranded without it! Contains the most common bearings, stop collars, screws and allen wrenches to fix any bit. Includes storage case plus: two ¼" stop collars, two ½" stop collars, 12 bearing screws (4 long, 4 short, 4 metric), 3 allen wrenches for stop collars and bearing screws, a tube of bearing lubricant, cleaning brush, and the 15 bearings listed. 35 Piece Survival Kit SAVE $101 199-9642 If Sep. $151 $49.99 NEW! 35 Piece Survival Kit with Blade and Bit Cleaner (400-0027) SAVE $103 199-2742 If Sep. $163 $59.99

Total Tool Care

Blade & Bit (A) Heavy duty cleaner. Removes resin, gum and pitch from saw blades, router bits, shaper cutters and all cutting tools. 8.45 oz. USA

A

B

Rust-Free (B) Rust and stain remover. A few sprays will remove stubborn rust and stain build up on almost any surface. 8.45 oz. USA

C

All Aerosols Ship

Ground Only Boeshield T-9 (C) Seals out moisture. Waterproof metal lubricant that penetrates metal pores and forms a protective barrier against rust build-up for up to 12 months. Dries to a thin film. No silicones to interfere with finish. Safe for most painted surfaces, plastics and vinyls. 12 oz. USA A Blade & Bit Cleaner, 8.45 oz. 400-0027 $11.99 B Rust Free, 8.45 oz. 400-0024 11.99 C Boeshield T-9, 12 oz. 400-0026 17.99 Tool Care Package (A, B, & C) 400-0021 If Sep $41.97 Set $35.99

Bearing Lubricant Spray

Fights friction and heat caused by high RPMs. Cleans and shields out dust to make All Aerosols Ship bearing like new. Aerosol can, Ground Only 5.5 oz. USA 400-0017 $15.99

www.EagleAmerica.com / 1-800-872-2511

41

Router Tables Router Table System

See Page 47

“Router Table Top” with Fence

SAVE 30!

$

Router Table Top • Heavy 24" x 32", 1⅜" thick tabletop has durable melamine surface and polyethylene edges. • Pre-mounted aluminum 91/32" x 12 3/32" insert. Removable rings allow 3 different size openings Stand sold to fit most router bits.  separately P. 43. • With aluminum miter slot and T-track slots (to mount fence).  PRO U-Turn Lift • The guide pin allows freehand routing.  &Compatible! • Threaded inserts on the bottom of the table top mount to a leg set or cabinet base. • Hex head adjusting screws level magnetic insert.  Router Fence  • 33" long anodized aluminum angle keeps the fence at 90˚ for accuracy (within .010"/").  • High split fence with allows safer vertical edge routing. • Split fence has dust port and adapter, plus durable plastic safety guard. • T-slot in fence accommodates featherboards or jigs  • Fence mounts on T-slot, allowing independent adjustment and varied openings around router bit.   • Measuring tape on top of fence reads both right to left and left to right, for easy measuring. ™

NEW Router table design! Fence: New T-square style design stays parallel to the miter slot and adjusts easily without deflection. The microadjust wheel ensures precision. Shop Stand: New, easy-to-use steel stand that allows table NEW! Fence T-Square design adjustment to any height between 29" and 35". Table Top: New design that simplifies fence removal for freehand routing. Level-Loc Insert Plate includes 3 reducing rings. The complete table system includes: MDF router 24" x 32" table top with micro dot finish and a combination miter track /t-track; aluminum fence measuring 36" long x 2¾" wide x 3" tall with independent MDF faces and integrated dust port; phenolic router insert plate measuring 9¼" x 11¾" x 3⁄8" with a 35⁄8" center opening, three insert rings and starting pin; and adjustable steel stand. USA Value Combo - SAVE 30! NEW! Complete Kreg Precision Router Table System includes: Precision Table Top, Fence, Plate & Stand 415-5650 $499.99 NEW! Precision Router Table Fence 415-5652 199.99 NEW! Router Table Top and Plate 415-5651 179.99 NEW! Multi-Purpose Shop Stand 448-6256 149.99

“Extension” Router Table Top & Fence

Mount to any table saw with standard fence and 27" deep top. The 1⅜" x 23½" x 27" melamine table has an aluminum router insert with three removable rings, a 2¼" dust PRO port, aluminum t-track slots U-Turn Lift and aluminum miter slot. The T-slot &Compatible! in the high split fence accommodates featherboards or jigs. A 24" long anodized aluminum angle keeps the fence at 90˚ (within .010"/"). A wood frame (1⅛" x 2¼") mounts the extension table to table saw rails. Table Top, Fence and 12" x 9" Insert Plate 415-2395 $189.95 Table Top and Fence Only (No Plate) 415-9776 149.95 Insert Plate Kit 415-4490 65.95 ™

42

Table Top, Fence and Insert Plate Table Top and Fence Only (No Plate) Insert Plate Kit (color may vary)

415-2393 $189.95 415-9774 149.95 415-4490 65.95

“Extension” Cast-Iron Router Table Top & Fence

PRO

A Rock Solid & U-Turn Lift Compatible! 50 pounds! The cast-iron professionalgrade Router Table Top Extension replaces either the left or right extension wings on any table saw with 27" between the rails. Mounts easily to a table saw, cabinet, or steel stand. Includes: • 16" x 27" cast-iron top machined flat and true for stability and exacting control of stock • Extra tall split fence (6" high) allows edge routing for safer vertical routing • Fence stores under table • Standard aluminum miter track for miter gauge • Aluminum 91/32" x 123/32" insert with removable rings that allow 3 different size openings • 2¼" dust port • Durable plastic safety guard ™

Cast-Iron Table Top, Fence, & Insert Plate 415-2397 $289.95 Cast-Iron Table Top and Fence Only (No Plate) 415-9777 249.95 Insert Plate Kit (color may vary) 415-4490 65.95

Router Tables Bench Top Router Table

Heavy Duty table with thick gauge steel stand

SALE $ 149.95!

“Precision” Sliding Top Router Table and Fence

SAVE $20

Mounted to a 20" wide x 15" deep x 13½" tall stand, the table and fence will be 14½" above the work bench. Features a 91/32" x 123/32" aluminum Router Insert Plate with removable rings that allow 3 different size openings, two T-track Slots and one Miter Slot. The t-track slots allow attaching featherboards or jigs to the fence. The high Split Fence has a dust port for standard shop vac hoses. Hex head adjusting screws level the magnetic insert. The sturdy 1" thick table top has a durable 24" x 16" MDF and Melamine surface with banded edges. Measuring tape on top of fence. 24" long anodized aluminum angle keeps the fence at 90˚ (within .010"/"). Plastic safety guard. 415-2385 Reg. $169.95 $149.95

“HeavyWeight” Router Table

Miter Gauge has positive stops at 90º and 45º. Slides in a 3/4" wide by 3/8" deep T-slot Power Switch is mounted on the right front table leg with a built-in safety key

Sturdy Stand: foot design with splayed steel legs gives the table added stability

Heavy Duty Cast-Iron and Steel Table includes: • A gas-filled Lifting Spring for effortless tilting of the table top for quick router access • Large, heavy-duty CAST-IRON top is machined flat with a 26⅞" by 20" workspace. Removable rings allow three different size openings (1⅛", 2¼", 3⅝"). • Heavy Cast-iron eliminates vibration, making this the perfect platform for your heavy duty 3 hp router • Universal Clamping System: Holds any router (up to 3½ hp). No drilling needed! • Adjustable extruded aluminum Split-Fence with 4" dust port and twin workpiece “hold-downs” Heavyweight Router Table 415-9460 Reg. $399.95 $379.95

Heavy Duty Cast Iron, Extruded Aluminum and Steel Router Table • Gas-Filled lifting spring • Dual mode routing: Use for effortless tilting of the as sliding or fixed, locked top for quick router access. work surface • Smooth sliding table top • Large work surface: on this large table make Expansive and efficient difficult routing easy, safe 22" x 31" table top and precise. It is especially • Universal clamping system helpful when making holds any brand router. No raised panel doors. drilling needed! • Variable opening inserts • Power switch conveniently in the fixed cast-iron mounted on right front leg and sliding extruded with built-in safety key aluminum top with • Cross-feed hold down • Split fence/dust hood: system: Fully adjustable, Extruded aluminum split keyed for 90˚ and 45˚ set-up fence, 2" large capacity • Sturdy stand: the foot is dust hood, adjustable cross braced. Splayed steel hold downs, and micro legs give the table extra adjustments stability. Built-in shelf ! • Shaper-like construction • Heavy duty lifting handles. and "Rock Solid" stability Precision Router Table 415-9463 Reg. $499.95 $469.95

Heavy Duty Router Table Stand

Solid steel construction. Sturdy legs with adjustable rubber feet ensure stability and reduce vibration. 32" tall, the stand top measures 24" by 16½". Footprint is 32" by 24". The stand weighs 24 lbs. SALE! 415-9684 SAVE $10! $69.95

Router Table Top sold separately.

www.EagleAmerica.com / 1-800-872-2511

43

Router Tables

Phenolic Router Table Top with X1 Fence, Aluminum Insert Plate and Pro Stand shown.

“Phenolic" Router Table Winter Sale Packages! Made from solid

¾" thick, phenolic “mineral resin” material for strength, impact and wear resistance, and stability. Phenolic WINTER tables are a top choice for many industrial shops. The table top is 24" x 32" and will use 91/32" x 123/32" inserts, the U-Turn Lift (P. 47) and PowerLift Pro (P. 5). The deluxe double T- track features one slot for ¼" hex head bolts, and a second standard ¾" miter slot for use with most miter gauges and jigs. The double t-track accomodates many different hold downs and jigs, expanding the top’s capabilities. • Pre-drilled for mounting the X1 Fence. • Pre-drilled for the 35" high x 26" wide x 22" deep Pro Router Table Stand (P. 47), which features sturdy, square tube steel legs. The Phenolic Top can be mounted to other stands.

SALE

PRO

& U-Turn Lift

™

Compatible!

Featuring a deluxe double T-track!

“Phenolic” Table Top, ¼" Aluminum Plate, and X1 Fence 415-9752 SAVE $40.00 List $429.95 $389.95 “Phenolic” Table Top, ¼" Aluminum Plate, X1 Fence and Pro Stand (P. 47) 415-9755 SAVE $59.95 List $544.90 $484.95 “Phenolic” Table Top, X1 Fence, Premium 3/8" Aluminum Plate Kit (P. 45) 415-6304 SAVE $90 List $504.84 $414.95 “Phenolic” Table Top, X1 Fence, Premium 3/8" Plate (P. 45), Pro Stand (P. 47) Includes 1/32" and 1/16" space 415-6306 SAVE $110 List $619.84 $509.95 bars that offset the fence face

n li n

o

ide

v

44

415-4502

e

o

A significant upgrade to almost any router table! Standing 4" tall, this fence mounts to any table that is ½" to 1½" thick and from 24" to 32" wide. Features a two track mounting system with adjustable rulers so you can set the fence to zero and make repetitive movements. The X1 “top mounted” ruler ensures that repetitive cuts or setting your stop block can be done with ease. The removable and fully adjustable fence faces are made of melamine coated heavy-duty MDF and fully edge banded for low friction and long life. Adjustments are made using locking knobs - no tools needed! The core of the X1 is

Make exact copies of any shape with your router! SALE! Attaches to any router table! Performs operations similar to machines costing hundreds of dollars. Make unlimited, exact copies of shapes from either inside or outside patterns. Repetitive cuts are easy and error free. The large, 8" arm reaches to the center of a 16" wide piece. The guide pin is lowered inside or against the outer edge of the template. Includes four steel pin sizes: (¼", 5/16", ⅜" and ½"). Instructions included. See page 12 for matching ¼", 5/16", 3/8" and ½" straight router bits, or page 14 for solid carbide bits. “Daisy” Pin Router Save $5! 415-9061 $43.95

Two track mouinting system with adjustable rulers

anodized aluminum, with available t-slots to mount a stop block or almost any jig or accessory. • The X1 includes two 1/32" x 1/16" space bars, which offset the fence face, either 1/32" or 1/16". They’re stored in the the fence for easy access when needed. • The X1 Dust Port is designed to accept a 2¼" or 2½" vacuum hose. With smooth action, repetitive movements, adjustable fence faces, open t-track, rulers, 2 offset bars, dust collection and safety guard, the X1 fence has it all!

“X1” Router Table Fence SALE!

“Daisy” Pin Router

Top mounted ruler ensures repetitive cuts are easy!

SALE 43.95! $

SAVE 10%

SAVE $20.00 List $209.95 $189.95

Router Table Essentials

“Ultimate” Router Table Package. We’ve assembled a routing monster!

X1 Router Table Fence

Two track mounting with adjustable rulers.

Phenolic Router Table Top

Mineral resin, high impact, wear resistant top.

3¼ HP Variable Speed Router Motor

U-Turn Router Lift and Plate

Heavy duty, 4.2" dia.

Adjust from the side, keep work on table.

WINTER

SALE

Pro Router Table Stand

Pre-drilled steel stand with non-slip adjustable feet.

SAVE $150! Ends 2/28/17. Five component system:

• The 24" x 32" Phenolic Router Table Top (P. 44). • The 4" tall, two track mounted “X1” Fence (P. 44). • U-Turn Router Lift with ⅜" aluminum plate. Adjusts the router with a side handle (P. 47). • 3¼ HP Variable Speed Router Motor and the Pro Router Table Stand (P. 47).

“Ultimate” Router Table Package

Phenolic Table Top, X1 Fence, U-Turn Lift, 3¼ HP Motor, Pro Stand 415-9754 Reg. $1049.75 $899.99

“Ultimate” Router Table Package 2.0

Featuring the new PowerLift Pro with 7" Android Tablet (P. 5), the Phenolic Table Top, X1 Fence, 3¼ HP Motor, and the Pro Router Table Stand. 415-3050 Reg. $1289.79 $1124.99

Premium Aluminum Plate Kit

SAVE

$165!

WINTER

SALE

With 5 locking insert rings and wrench! SAVE $15! Ends 2/28/17. The ⅜" thick, 91/32" x 12 3/32" premium aluminum router insert plate is sized to fit all MLCS router tables that use a router insert plate and will support the heaviest of routers. Included with the plate are a quick change insert ring, four leveling screws, a starter pin for routing curved pieces, and insert wrench. The plate has a 3⅝" opening which can be reduced to 2" using the included insert ring which spins to lock in place. The kit also includes a 4-piece locking insert ring set (P. 47) which has openings of 1/4", 1/2", 1-3/8" (accepts standard template guide bushings) and 2-1/2". 415-6302 $99.85 $84.95

Router Collet Extension

Get an additional 2¼" of height out of your router bits. Eliminates the dangerous temptation of pulling the shank from the $24.99! collet in order to raise the bit. SAVE $5 Install like any ½" shank bit. Router Collet Extension SAVE $5! 415-0660 $24.99 18mm & 28mm wrenches for Collet Extension 415-0662 7.99 Router Collet Extension with 18mm & 28mm wrenches SAVE $8! 415-2660 $29.99

SALE

Rout-R-Lift II

The Cam-Lock Clamp design allows quick router changes! Designed to use with the Bosch 1617/1618, Dewalt 610 / 618, Porter-Cable® 690 / 890, and Craftsman 1754 / 17540 / 28190 / 28084. 8 position set screw plate leveling plus: • Reinforced 9¼" x 11¾" CNC machined phenolic top plate with 2" insert ring to reduce opening • Upgraded spindle features a New Double-Sealed Bearing Design for easy raising and lowering. • Built-in spindle lock for added security • Above-the-table height adjustment and bit changes 415-6522 $179.99

Digimag Digital Remote Readout

Add a digital readout to your power tools Adapts to router lifts, router 6" Bar Length tables, planers, shapers and table saws. Remote display connects $10! with a 52" cord for easy installation and access. Display reads in inches with fractions (1.64") or millimeters. Decimal inches are displayed in .001" increments and millimeters in .05mm increments. Install using magnets, tape, or screws. Vertical and horizontal mounting hardware included. 6” Bar Length SAVE $10! 424-0160 $39.99 12” Bar Length 424-0162 54.99

SAVE

Mast-R-Lift II

Features 2" twist-lock insert ring. 9¼" x 11¾" x 3⁄8" aluminum plate. Motor pads for Porter Cable, DeWalt, Makita, Hitachi, Milwaukee, Craftsman, and Rigid. Comes with starter pin, lift wrench and spanner wrench. Fits most routers. JessEm Mast-R-Lift II 415-6506 $349.99 JessEm II & 3¼" hp Variable Speed Router Motor 415-6561 Save $20! 415-6505 Reg. $559.94 $539.90

www.EagleAmerica.com / 1-800-872-2511

45

Router Table Essentials The Finger Saver

Small piece safety jig Holds work securely. Features a quick release clamping action. Large handles gives precise control at all times. Adjustable vise-like jaws will hold wood stock up to 10" wide and cuts any angle up to 45°. 420-1010 $24.99

Speed Control

Work at best speed for bit and wood Reduce speed, not torque! As load increases, electronic feedback maintains speed by increasing voltage to motor. Plug in heavy duty 20 amp speed control to outlet then plug your router into speed control. From 0 RPM to full speed. Aluminum case. For industrial use. • Better, safer results with large raised panel bits • Stops burning • Less wear on bits • Less noise • Softer starts at lower speeds • Less tear out • Full power and torque at all speeds • 120V • Works with most routers 3¼ hp or less • 3 position rocker switch: “Variable-Off-Full Speed” Do not use with soft start or variable speed routers Speed Control - Heavy Duty 20 Amp 415-9410 $39.95

Off-Set Router Collet Wrenches Makes difficult router bit changes quick and easy. Wrenches fit around the opening of your router plate. Rubber coated handle for a comfortable anti-slip grip.

• JessEm's unique roller system holds down stock and pushes into fence for precise feed. Like having an extra pair of hands! • 1½" urethane one-way rollers set at 5° pull stock tightly toward fence. 2¾" total travel • One-way rollers prevent kickback • Rout end grain with confidence • Quick adjustment for easy set-up and fine-tuning • Maximum stock thickness from router table surface to 9/16" below center of T-slot • Compatible with most router table fences with a horizontal ¼" T-slot above the fence faces • Includes one infeed stock guide, one outfeed stock guide and detailed instructions 415-6519 $119.99

Safety “Table” Power Switch

NEW! Safety Lockout feature. Mechanical push button switch features a large paddle “STOP” that quickly shuts off power to your 120VAC machinery. Place the switch where you can use your hip or knee to bump it to the “off ” position. Never take your hands off the workpiece to turn off the machine! Surface mounts easily. Works with routers 31/4 HP or less. SAVE $20! 415-0840 $29.95

Safety “Motor” Power Switch

Exactly the same switch as above but must be hardwired to the motor and works with 110 or 220 volt motors. 415-0835 $22.95

Safety “Magnetic” Power Switches

415-0670 415-0672 415-0674 415-0676

¾” Hitachi / Triton 3¼” hp 7⁄8” DeWalt / Fein 15⁄16” Bosch / Makita / Triton 2½ hp 11⁄8” Porter Cable

$14.99 14.99 14.99 14.99

Dual Slide Motion Featherboards A

Clear-Cut™ Stock Guides for Router Tables

B

Avoid accidental “turn-ons”. The magnetic switch keeps unattended machinery from accidently or automatically turning back on, after power is restored from a power failure or other power interruption. When the input power is disrupted, the magnetic capsule prevents power from passing through to the switch. Once the input power is restored, the start button must be engaged to restore power to the tool. See the Power Switches above for other features. Not compatible with remote control relay boxes. Magnetic Table Switch with cords 415-0839 $49.95 Magnetic Switch without cords 415-0834 39.95

True-FLEX Featherboards TM

The single featherboard (A) works for most applications and the Tandem Featherboard with spacer (B) gives greater support. Mounting hardware included for ¾" and 5⁄8" miter bars and T-slot tracks. 2+ ea. A Featherboard 415-7043 $20.99 $18.99 B Tandem with Spacer 415-7044 34.99 30.99

46

Attach to a standard miterslot or T-slot on a table saw, router table or bandsaw. Flip it over to use it as a stop block. 6½" wide by 7¼" deep and 5⁄8" thick. USA (Pack of 2) 415-7046 $39.99 Single 415-7048 $19.99

U-Turn Router Lift System U-Turn Router Lift

Ultimate Router Table Package!

Adjust the router from the side P. 45 and keep your work on the table! SAVE $70! The U-Turn is a professional quality router lift, precisely machined from aluminum and steel with top quality components. Built to handle $299.95! big 4.2" diameter, 3¼ hp routers with ease (MLCS SAVE $70 Router 415-6561 & Porter-Cable #7518), this lift allows smooth and easy adjustments. With over 3" of vertical travel, your router bit changes can be made from above the table. Sealed ball bearings, brass fittings, heavy duty guide posts and a lead

Router sold separately

SALE

screw mean this lift is built to last. The “U-Turn” is pre-mounted to a heavy duty aluminum router plate that is designed to fit MLCS table tops (pages 42-44). The “U-Turn2” is mounted to an insert plate which is designed to fit other (non-MLCS) router tables. The router plate opening allows for bits up to 3½" in diameter, and includes a locking insert ring with a 2" opening. The U-Turn’s 18½" The U-Turn Lift includes: height adjustment handle arm • 3 allen wrenches • 1 insert ring with extends from the center of the 2" opening router table. The handle will • 1 insert wrench clear the edge of any 36" wide • 1 starter pin or smaller table. If you are not • Plate leveling screws using the MLCS 415-9683 Router Table Stand designed for this lift, you will have to drill a hole in your stand to accommodate the handle. Kits and extra insert wrenches sold separately. SALE! The “U-Turn2” Lift – with (11¾" x 9 ¼" x 3⁄8") insert plate For non-MLCS tables. 415-6558 Reg. $369.95 $299.95 SALE! The “U-Turn’ Lift – with (123⁄32" x 9 1⁄32" x 3⁄8") insert plate For MLCS table tops. 415-6557 Reg. $369.95 $299.95

U-Turn2 Lift & Router Combo

COMBO

SAVE $40!

Includes U-Turn2 Lift (415-6558), plus 3-1/4 hp Variable Speed Router Motor (415-6561) 415-6552 SAVE 40! If Sep. $519.90 $479.90

U-Turn Lift & Router Combo

COMBO

SAVE

Includes U-Turn Lift (415-6557), plus 3-1/4 hp $ 40! Variable Speed Router Motor (415-6561) 415-6551 SAVE 40! If Sep. $519.90 $479.90

Locking Insert Ring Kit & Wrench



4 piece locking insert ring kit has openings of ¼", ½", 1⅜" (designed to fit standard template guide bushings), and 2½". Easy-in and Easy-out, using the specially designed wrench, insert rings spin and lock into place. No screws! Use the ring set with the U-Turn router lift system. For U-Turn Lift only. 4 Piece Insert Ring Kit 415-6559 $19.95 Insert Wrench 415-6560 9.95

Router sold separately

Pro Router Table Stand SAVE $15!

WINTER

SALE

Includes Stand Only

Ends 2/28/17. This 35" high x 26" wide x 22" deep stand will work great with almost any router table top but it is specially designed to work with the U-Turn router lift. It’s manufactured with a pre-drilled series of holes for the lift handle and lift handle support bushing guide. The stand is made of steel with non-slip adjustable feet. The stand mounts to the table top by simply using screws through the pre-drilled mounting holes on the stand. Pro Router Table Stand Reg. $114.95 415-9683 $99.95

3¼ hp Variable Speed Router Motor SAVE $50! BIG 4.2" diameter motor!

Heavy Duty 15 Amp Router Motor handles the largest router bits on the market. Cutting with a 3½" diameter raised panel bit is no problem! The variable speed range is 10,000 to 22,000 RPM, so no external speed control is needed and it will handle all of your routing operations. Included with the motor are ¼" and ½" collets plus 2 collet wrenches. SALE! 415-6561 Reg. $269.95 $219.95 See Router Reducers @ EagleAmerica.com

www.EagleAmerica.com / 1-800-872-2511

47

Router Table Essentials Brass Router Inlay Kit

SALE

Make perfect fitting inlays and repairs $29.99!

SAVE $10!

SAVE $10

B

Multi-Joint Spacing System Limitless jointing system!

SALE

The kit includes universal bushing with retainer nut and snap on brass collar, A plus a 1⁄8", down-cut solid carbide spiral bit. Fits any router that accepts a standard 13⁄16" two piece template guide bushing. For all other routers, order one of our Universal Template Guide mounting plates. Instructions included. A Complete Brass Router Inlay Kit SALE! 400-1321 $29.99 B Double Face Tape, ¾" x 108 ft. long 447-7150 10.99

Butterfly Inlay Template

Add a distinctive look to table tops, humidors, jewelry boxes, and other projects.

Make 7 decorative butterfly inlays from 111⁄16" to 3¾" in length. Using our optional Router Inlay Bushing Kit #400-1321, simply attach template to material with double-faced tape, rout out both the male and female cuts. Female cuts will require a chisel to square-up the corners and glue in place. Template measures 11¾" x 10" and is made from durable ¼" thick acrylic. USA Butterfly Inlay Template 400-1914 $29.99 Router Inlay Bushing Kit, pg 50 400-1321 39.99 Save! Template and Inlay Kit 400-1914K If Sep $69.98 Set $59.99

Inlay Kit Patterns

A D

B

C

E F

Made of 3/16" thick, shatter resistant plastic, they’re sized to work perfectly with our inlay kit 400-1321. A Bowtie (small) 3½" x 1½" 401-1130 $9.95 A Bowtie (large) 4¾" x 2¼" 401-1131 9.95 B Diamond 5" x 3" 401-1132 11.95 C Fleur de Lis 5½" x 7" 401-1133 14.95 D Star 4¼" x 4" 401-1134 9.95 E Heart (small) 4½" x 4" 401-1135 10.95 E Heart (large) 6" x 5" 401-1136 13.95 F Oval 5½" x 3½" 401-1137 10.95 Complete Set of Eight Inlay Kit Patterns Save $37.65! #401-1140 If Sep $92.60 $54.95

48

Sliding Dovetail

¼" Box Joint

WINTER

3/8" Box Joint

½" Box Joint

Make these joints: • ¼", 3/8", ½" Box Joints • Any width rabbet, dado, spline and sliding dovetail joint - no limits.

SAVE $40! Ends 2/28/17. Quick and easy set-up with

the included 4 brass set-up bars. Glides smoothly with UHMW glide bars. 24" base constructed with sturdy MDF and durable laminated surface works on most router tables. For table-mounted use only. Clamps and router bits are not included. System includes instructions, plus: • One ¼" Spacer Fence • One Dovetail Liner Offset Fence • One ⅜" Spacer Fence • One ½" Spacer Fence • Three Right Angle Fences • Positive Stop Setup Block • Four Brass Set-Up Bars SALE!

415-9405 $79.95

High Pressure Glue Injector With a brass tip!

SAVE $10! Injects

up to 550 psi! Forces glue into tiny crevices. Repair and re-glue furniture joints, bed frames, chairs, cabinet legs, veneer and laminates, musical instruments and more. Great $10.00! for crafters and hobbyists. Use with water based glues. Includes 3/64" brass tip. 415-9305 $14.95

SAVE

Push Blocks and Sticks

Save! 5-Piece Push Block and Stick Set

420-2920 Set $29.99

See individual push blocks and sticks @ EagleAmerica.com

Router Essentials Milescraft PantographPRO

Adjustable Circle Cutting Jigs

Pre-drilled jigs make router set-up easy! A

Pre-drilled to fit 19 different models of plunge routers. Instructions and screws included. USA B A 31” Long, Cuts 368 Circles from 7” to 52¾” 400-1206 $59.99 B 13” Long, Cuts 256 Circles from 2¼” to 183⁄16” 400-1205 49.99

6-Piece Route-A-Corner Set

Route smooth, accurate corners Set consists of two convex (1½, 3, 4, 6" radius), two concave (1, 2, 3, 4" radius), and two 45° angle templates (1½, 3, 4, 6"). Clamp and route using a pattern bit or straight bit with template guide. USA 400-1190 $39.99

3-Piece Corner Radius Template Set Safely cut a perfect corner radius Templates have 12 radii from 1⁄8" to 1" in 1⁄8" increments. Clear acrylic allows you to see exactly what you are cutting. 400-1200 $39.99

stencils and line drawings

• Attaches easily to most • 3 Router Bits (1/4" V-Groove routers using the 7" Router Bit, 1/4" Straight TurnLock™ BasePlate Router Bit and 3/8" Long technology and hardware Reach Core Box Router Bit) • Make your own stencils • 3 stylus tips (large head, using your computer, small head and pointed) coloring book or any type of downloaded art 400-2232 $69.99

Billy Pedal® Foot Switches

Hold your work safely with both hands and no fumbling for the on/off switch. Operate your router or other power tools with hands-free convenience. The “Deadman” Pedal is a spring loaded safety switch that turns the tool off when you lift your foot off the pedal. Simply step on the “Continuous Running” Pedal to activate, step again to deactivate. Just plug either foot switch into an electrical outlet, then plug your tool into the Billy Pedal. 15 amp with 8' power cord. Deadman Pedal Continuous Running Pedal

415-9080 415-9089

$24.95 25.95

Router / Sander Friction Mats n li n

e

v

ide

o

o

Router Pantograph

Rout any font or line drawing

2D sign/design making without router template limitations. A fingertip control stylus follows the design and the router does the work. If you can print it, you can rout it. Trace any letter stencil or drawing, Included with kit: and your router makes the cut at a 50% reduction • Modern & Old English font

Create beautiful carvings from templates or models. Print out computer drawings and fonts and use them as templates. Mounts to any router with a 6" base or smaller. Three reduction settings of 40%, 50% or 60%. Letter and number templates included (script, modern, computer, Old English, and Far East). Line drawings included (dogs, ducks, squirrel, cat, santa, turtle, pig, pony and lion). 400-2330 $54.99

Soft natural rubber hold materials securely in place when routing, sanding, carving, scraping, drilling, B cutting glass, etc. Open A Mesh (A) lets dust pass through. Solid Rubber (B) mats feature fine gripping “teeth”. Both mats are 1/8" thick. USA A Open-Mesh 24” x 30” 420-3536 $10.29 B Solid Rubber 24” x 30” 420-3010 14.99

Router Circle Template

Features 12 different diameter circles from 1¼" to 3½". Made of 7⁄16" thick plastic. Use with a guide bushing or pattern bit.

400-1140 $39.99

www.EagleAmerica.com / 1-800-872-2511

49

Router Essentials Brass Setup Bar Sets

9-Piece Brass Template Guide Set

Eliminate the guesswork!

Turn your router into a duplicating machine

Precision solid brass bars allow you to accurately determine the proper depth of cuts, fence to cutter distances, material thickness and more without the use of tape measures or calipers. Can be stacked to get measurements from 1⁄8" to 17⁄16". Set includes five bars measuring - 1⁄8", 3⁄16", ¼", 3⁄8" and ½" square. USA 2½” Long Bar Set 400-2020 $18.99 4” X-Long Bar Set 400-2018 20.99

400-1459 $24.99

n li n

o

ide

v

9-Pc Brass Router Temp. Guide Set

o

SALE

e

SAVE $5! 9 piece kit significantly expands the use of your router. For template controlled operations such as dovetailing, stair routing, hinge butt routing, omni jig template, lock $ face routing and other general 24.99! template operations. Template guides SAVE $5 can be used directly with any router having a baseplate with a 13/16"* dia. center hole. The kit contains two lock nuts and seven different template guides (5/16", ⅜", 7/16", ½", ⅝", ¾", and 51/64" OD). *Works with most DeWalt, Porter Cable®, and Skil routers. Works with some Black and Decker, Elu, & Hitachi routers. List $29.99.

M Power Combination Router Base and Accessories

8-Piece Zero Clearance Ring Set

SAVE $20!

Add support and get less router tearout

SAVE $5! Eliminate the gap between

SALE

the cutter edge and base plate opening $ in your router for safer operations. 34.99! Rings attach directly to any router or SAVE $5 mounting plate that has a standard 13⁄16" hole opening. Includes reducers with openings of 1⁄8", ¼", 3⁄8", ½", 5⁄8", ¾", 7⁄8" and brass lock nut. Case included. 8-Piece Zero Clearance Ring Set 400-1510 $34.99

Save $10! 9 Pc. Template Guide Set and 8 Pc. Zero Clearance Set 400-2459 If Sep $59.98 Set $49.99

Router Collet Reducers

Used for router bits, end mills, drill bits and dremel bits.

Outside Dia. Inside Dia. OAL ¼” 1⁄8” 1” 198-0305 ¼” 3⁄16” 1” 198-0307 ½” 1⁄8” 1” 198-0401 ½” 3⁄16” 1” 198-0403 ½” ¼” 1” 198-0405 ½” 5⁄16” 1” 198-0407 ½” 8mm 1” 198-0505 ½” 3⁄8” 1” 198-0605

50

$6.99 6.99 6.99 6.99 6.99 6.99 6.99 6.99

7 Functions in 1 Router Jig. Fits ALL Routers. SALE PACKAGE! 7 functions of this combination, quick change jig takes average router performance to a new level. Supports: • Adjustable Dadoing and Trenching • Adjustable Mortising • Anti-Tilt Support • Small Circle Compass • Off Set Edge Routing • Faux Panel Dado Copier • Flush Trim Lipping (with trim kit #415-2311) Increases stability and accuracy. Fits ALL routers that have edge guide/side fence rod drillings in their bases. Jig slides on and off router with almost no set up time. Features: • Micro Adjuster • Indexed Rule • 2" Bakelite Ball Handle • 2 Section Anti Tilt Leg supports and stabilizes • Magnetic Pivot Pin Storage • Pro laser cut 5mm thick acrylic baseplate MPower Combination Router Base (CRB7) MPower CRB7 Accessory Trim Kit MPower CRB7 Accessory Edge Guide

SALE PACKAGE INCLUDES:

• CRB7 router base • CRB7 accessory trim kit • CRB7 accessory edge guide Save $20! If Sep $134.97 415-2320 $114.99 415-2315 $84.99 415-2311 29.99 415-2312 19.99

Router Essentials Router Guide Kit

n li n

e

o

SALE $59.95! $SALE SAVE $20 24.99! SAVE $5

Cut circles and arcs from 10" - 51" in diameter. Make fence guided cuts up to 31" from the board edge. Use the 13" offset base for added stability during edge or template routing. The 20" sturdy aluminum beam provides rigidity during cuts. 400-2355 $44.99

Router not included

Universal Template Guide Plates

Door Mortise Kit includes (A): hinge templates (for square or rounded hinges 2½", 3", 3½", 4" and 4½"), strike plate templates (11⁄8"x 2¾", 1½"x 2¼", 1½"x 2¾"), latch plate templates (1"x 2¼", 11⁄8"x 2¼", 11⁄8"x 2¾"), and carbide tipped router bit with bearing. Hinge Mortise Kit includes (B): hinge templates (for square or rounded hinges 2½", 3", 3½", 4" and 4½"), and carbide tipped router bit with ball bearing. A Door Mortise Kit 417-1010 $29.99 B Hinge Mortise Kit 417-1015 19.99

e

Door & Hinge Mortise Kits

Install door hinges in no time! Kits feature centered tape measure tabs for accurate placement on door and jamb and a door thickness selector that is easily adjustable for 13⁄8" and 1¾" doors. Templates drop into steel template frame and have a reversible design for square or rounded hinges. No need for guide bushings.

v

A No special adapters required! Those with a 13⁄16" center hole will accommodate standard guide bushings. Extra long mounting B screws may be needed (see web for details). USA Thick Material Plate Hole Size A ¼” Acrylic 6” Round 13⁄16” 415-0306 $14.99 A ¼” Acrylic 7” Round 13⁄16” 415-0307 17.99 B ¼” Acrylic Approx.11¾” square – 415-0505 15.95 B 3⁄8” Acrylic Approx.11¾” square – 415-0504 19.95 B 3⁄8” Acrylic Approx.11¾” square 13⁄16” 415-0502 24.95 B 3⁄8” Acrylic Approx.11¾” square 2” 415-0503 24.95 Plate Alignment and Centering Kit 198-0400 4.19

NEW! With Double Sided Edge Guide! Pre-drilled for these SAVE $20! When plunge routers: Porter Cable (690 series, routing, never miss your 7529, 8529), Bosch (any base with a 3 hole pattern, spaced 4" on mark again. X marks the center), DeWalt (616 / 618 Series, spot! Pre-drilled with 621 / 625), Milwaukee (5615 / 5616 built-in Laser and LED / 5619 Series), Fein (FT-1800), Lights. Eliminate waste Elu (177), Sears (most models). with pinpoint accuracy. The Universal off-set router plate allows total nlin control of your router. A large, heavy duty, clear i de plastic base and knob/handle eliminates tipping when edge routing, but still allows a clear view of your work. The LED lights clearly illuminate any lines or patterns on work surface. Two AA batteries included. No wiring or plug is needed! New feature! An adjustable double sided edge guide allows you to follow a straight or curved edge. Two ball bearings easily follow a curved edge. Perfect for adding a groove to a cutting board or adding a decorative inlay to a table top. o

v

ide

OnPoint Laser Guided Router Plate

o

o

3 in 1: Circle Compass, Edge Guide & Offset Base

Double sided edge guide from bottom

• Increase the speed and • Easy to mount to any accuracy of repetitive router. Can be drilled plunge routing applications to fit any router. OnPoint Laser Router Plate

415-9098 List $79.95 $59.95

Universal Router Base Plate Standardize your router and increase visibility! SAVE $5! Designed to accept 13⁄16" diameter template guide bushings. Made of clear acrylic to increase work visibility. Fits just about any router. More information at EagleAmerica.com SALE! 415-0328 $24.99

SALE $24.99!

SAVE $5

www.EagleAmerica.com / 1-800-872-2511

51

Saw Blades Fusion Saw Blade

Flawless cross cuts & rips in hardwood, melamine and plywood Features unique geometry and makes cuts that have a flawless, glass smooth finish. Permashield coating reduces heat, friction and gumming. Ripping or crosscutting, this blade will tackle any project with excellent results. Dia. Teeth Arbor Kerf Features 10” 40 HIATB 5⁄8” .091 ●▲ 602-8409 $79.99 10” 40 HIATB 5⁄8” .126 ●▲ 602-8410 99.99

Glue Line Rip Blades

Stop sanding your glue joints / 12° hook Rip, glue, and clamp your project eliminating the need for sanding or jointing. Dia. 10” 10” 10”

Teeth 30 ATB 30 TCG 30 TCG

Arbor Kerf Features 5⁄8” .126 ●▲ 602-7510 $59.99 5⁄8” .126 ▲ 602-7409 59.99 5⁄8” .126 ●▲ 602-7410 69.99

Ultimate Cut-Off Blades

Dia. 8” 10” 10” 12”

Teeth 64 ATB 80 ATB 80 ATB 96 ATB

For glass-smooth finishes with underpowered saws. Thin kerf allows for easier feeding and reduced waste. Arbor Kerf Features 5⁄8” .116 ●▲ 602-8508 $64.99 5⁄8” .098 ●▲ 602-7411 64.99 5⁄8” .116 ●▲ 602-8510 84.99 1” .116 ●▲ 602-8512 124.99

Double Sided Laminate and Melamine Blades

Dia. 10” 10”

Teeth 80 TCG 80 TCG

Great for producing razor sharp, chip-free cuts on both the top and bottom of doublesided laminate or melamine and even veneered plywood. Arbor Kerf Features 5⁄8” .091 ●▲ 602-9610 $69.99 5⁄8” .126 602-9709 87.99

Blade Changer

Universal step design fits 10", 8” dado and 7¼” saw blades. 400-2013 $18.99

52

More Saw Blades @ www.EagleAmerica.com

8-Piece Super Dado Set

Square ToothTM design utilizes a shorter and thicker tooth reducing drag. Cut grooves from ¼” to 29⁄32” in 1⁄32” increments. Includes two 24 tooth outside blades and six 4-wing chippers. Case included.

Dia. 8”

Chippers (1) 1⁄16”, (1) 3⁄32”, (4) 1⁄8”

Arbor 5⁄8” 602-9508 $199.99

5-Pc Pro Dado Blade Set

The 12° negative hook angle makes flat bottom grooves and splinter-free cuts. Produce grooves from ¼” to 7⁄8” in 1⁄32” increments. Includes 2 twelve tooth outside blades, 3 two wing 1⁄8” chippers, 8 shims, 3 spacers, case and instructions. Dia. 8”

Chippers (1) 1⁄16”, (4) 1⁄8”

Arbor 5⁄8” 602-9208 $94.99

Combination Blades

A blade that does it all. Crosscut or rip any type of wood material. Precision cut, hardened bodies stay true and flat under load. Dia. 10” 10” 10” 12”

Teeth Arbor Kerf Features 50 COMB 5⁄8” .091 ●▲ 602-8310 $54.99 50 COMB 5⁄8” .126 ▲ 602-8411 59.99 50 COMB 5⁄8” .126 ●▲ 602-8421 69.99 60 COMB 1” .126 ●▲ 602-8412 99.99

Thin Kerf Blades

These blades have a faster feed rate and are great for under power saws because of their ultra thin design.

Dia. Teeth Arbor Kerf Features 10” 24 ATB 5⁄8” .094 ●▲ 602-8710 $39.99 10” 60 ATB 5⁄8” .090 ●▲ 602-8810 54.99 10” 80 HIATB 5⁄8” .098 ●▲ 602-7910 69.99

Sliding Compound Miter Blades

Designed for compound miter saws and radial arm saws, these blades feature negative hook angles, which delivers a performance boost that results in faster, cleaner cuts that require less sanding and filling. Dia. Teeth Arbor Kerf Features 8½” 48 ATB 5⁄8” .090 ●▲ 602-9107 $57.99 10” 60 ATB 5⁄8” .090 ●▲ 602-9110 64.99 12” 72 ATB 1” .090 ●▲ 602-9112 79.99

Advantage Features: ● Perma-SHIELDTM Coating, ▲ Anti-Vibration Technology

Saw Blades PSI Table Saw Dust Collection Guard

8 - Piece Stacked Dado Sets

Protects you from hazardous table saw debris • Hood is constructed • Connects to any standard from one piece, clear, 4" duct system shatterproof plastic • Can be mounted to • Accepts saw blades up to ceiling for maximum 16" clearance • Use with dado blades • Easy setup and • Allows tilts for 45° cuts adjustment • Adjusts easily to suit • Swings out of the way thickness of material • Sturdy steel mast being cut and boom construction • Accommodates splitter • Connects to 4" dust hose & anti-kickback pawls • Shipping weight 42 lbs. • Boom extends to 83"



415-TSGU List $249.99

$224.99

Industrial C4 micrograin carbide blades with extra large teeth and high strength steel body. Over twice the amount of carbide than most blades. Can be re-sharpened many times. Silver-Copper-Silver tri-metal brazing. Combination Blade  (E) Rip and crosscut all woods. Teeth consist of 4 ATB and 1 flat raker. Large gullets allow aggressive cuts and chip ejection. Finish Blade (F) High bevel ATB 30º tooth grind makes an ultra-fine finish cut. Crosscut and trim cut on all wood, composites and laminated materials. Expansion slots prevents warping. Dia. Teeth Kerf Arbor Thickness E 10” 50 ATB .135” 5⁄8” .095" 601-9103 $49.95 F 10” 80 ATB .126” 5⁄8” .087" 601-9104 69.95 ™

Freud Dial-A-Width Dado

Eliminate the need for shims! The SD608 is a 8" diameter with ⅝" arbor, stacked dado without shims. Each "click" of the patented dial hub adjusts the blade precisely by .004". Easy to use.

• Includes 2 outside • Features a maximum blades, 5 chippers, 29/32" cut width • Adjusts easily to right or wrench and carrying case left operating machines 602-9608 $269.99

A premium cut... incredible value Get smooth, flat bottomed cuts from ¼" to 29⁄32" wide. Precision ground C-4 micro grain tungsten carbide teeth stay sharp while they’re cutting through all types of hardwood, softwood and plywood. Includes two saw blades and six full body chippers (four ⅛", one 3/32", one 1/16"), eight shims for fine adjustments (two each .005", .010", .015", .020") and storage carrying case and instructions. Dia. Dado Saw Teeth Chipper Teeth Arbor 8” 42 6 5⁄8” 601-2008 $119.99 6” 30 5 5⁄8” 601-3103 89.99

Box & Finger Joint Set

Make precision box joints at an affordable price! Make perfect ¼" and 3⁄8" Box and Finger Joints without using shims or making adjustments. The 8", 30 tooth blades have long lasting C-4 micro grain carbide teeth which cut perfectly square fingers and flat bottom notches. Simply reverse the blades to change the size of the joint. Requires a 1.5 hp or larger saw. 5⁄8" Arbor. Instructions included. 601-2000 $79.99

Woodworker II (A) The best rated combination table saw blade for excellent rips and crosscuts on all hard and soft woods up to 2". Woodworker I (B) Makes scratch free, polished crosscuts on table and radial saws without bottom splintering. Thin kerf design. Chopmaster (C) For tight, perfectly cut miter joints and smooth crosscutting at any angle. Dado King (D) Make flat bottomed grooves without splintering across and with the grain. Comes with six 4-tooth chippers (including 3⁄32" chipper), two 24-tooth outside blades plus shims. Cuts 1⁄8" to 29⁄32" grooves. USA Dia. Teeth Kerf Arbor A 10” 30 ATB 1⁄8” 5⁄8” 604-1030 $94.99 A 10” 40 ATB 3⁄32” 5⁄8” 604-1041 109.99 A 10” 40 ATB 1⁄8” 5⁄8” 604-1040 114.99 B 10” 60 ATB 3⁄32” 5⁄8” 604-1060 124.99 C 10” 80 HIAT 7⁄64” 5⁄8” 604-1080 134.99 C 12” 80 HIAT 1⁄8” 1” 604-1280 135.99 D 8” Dado King — 5⁄8” 604-0800 299.99

www.EagleAmerica.com / 1-800-872-2511

53

Table Saw Essentials Digi Align

Add digital precision and accuracy to your shop! Get accurate measurements on any machine with a standard 3⁄8" x ¾" miter slot. Magnetic bar holds the tool in the miter slot, while still allowing it to slide along the slot. Easyto-read, 3-way digital indicator gives you readings in metric, inch or fractional increments. It has a 1" range, will read to within 0.0005” and features a hold function. 424-0221 $69.99

Clamping Miter Gauge

Useful and accurate when making crosscuts on table saws or when routing end grain. Squeezing the pistol grip engages a downward pressure clamp, securing your stock firmly in place. Fits any standard ¾" x ⅜" miter slot. The positive adjustable stops at 90° and 45°, left and right, are useful for both left and right tilt table saws. Includes adjustable stop block, great for repetitive length cuts. 4" maximum stock thickness. The bar extends to 12". Clamping Miter Gauge 415-9456 $49.99 Combo Set! Clamping Miter Gauge and Premium Miter Gauge Extension Fence (415-9457) 415-2456 If Sep $104.98 Set $89.95

Basic Miter Gauge

The basic miter gauge fits any $ machine track with 29.99! a standard ¾" x 3⁄8" SAVE $10 miter slot. Features a 18" guide bar and adjustable stops at 45° and 90°positions with a 120° swing. SALE! 420-5779 $39.99 $29.99

SALE

Slipit Tool & Surface Sealant

Forms a protective barrier against dirt and moisture on tools and equipment. Fights friction, binding, resin, and rust. 16 oz. USA 2+ ea. Gel 400-0036 $14.99 $14.49 Spray 400-0034 18.99 18.49

54



Precision Miter Gauge System

Measure once, cut once

Miter Gauge A System (A): Calibrated gauge head is CNC machined for absolute precision. Easy-to-read scale C enables fast and precise 1⁄10th of a degree angle adjustments, B while a micro-adjust feature allows angle adjustments to 1⁄100th of a degree. Other features include: a 24" track section with Flipstop and self-adhesive D measuring tape. Positive stops at 0, 10, 22½, 30 and 45°, brass pin for quick changes between positive stop angles, and a 24" bar with 5 bar adjusters to eliminate play between the bar and the table slot. Miter Gauge System Includes: Miter Gauge, 24" Track, Standard Flipstop and a PSA Measuring Tape. USA See additional Kreg Miter Gauge accessories online, www.EagleAmerica.com A Miter Gauge System 420-4930 $139.99 B Standard Flipstop 420-4933 29.99 C Production Stop 420-4934 22.99 D Perfect Miter Attachment 420-4935 22.99

Premium Miter Gauge Extension Fence

Provides support close to the blade to eliminate tear-out. Miter gauge Adjustable fence of extruded not included aluminum increases the face of your miter gauge to 25/16" high x 22" long. $54.95! • Extension bar increases the stop SAVE $10 capacity to 36". • The nylon stop adjusts along the full length of the fence, and locks tight for perfect repetitive cuts. SALE! 415-9467 $64.99 $54.95 Combo Set! Premium Miter Gauge Extension Fence and Clamping Miter Gauge (415-9456) 415-2456 If Sep $104.98 Set $89.95

SALE

Miter Gauge Extension Fence

Adds additional support to your miter gauge. The Miter gauge 23/8" high aluminum not included extruded fence is 20" long with a 1½" long plastic extension that allows you to slide right up to the blade. Adjustable flip stop allows for making repetitive length cuts. 415-9446 $29.95

Table Saw Essentials Zero Clearance Inserts

Improved cut quality, safer and cleaner Precision machined from melamine faced high density phenolic laminate for durability and wear resistance. Each insert has top leveling screws, side and end adjustment screws to facilitate perfect fit and a rear safety pin. A precut starter pocket makes cutting the clearance slot easy and a finger hole makes for simple removal. Colors vary. USA 2+ ea. (133⁄8” x 3¾” x 9⁄16”) Universal Delta Left/ Right Tilt Unisaw, 10” contractor, 10” Tilt arbor saw, Jet CTAS-10, Powermatic 63, Grizzly G1023 Sears 22104, 22114, 22124 400-1101 $24.99 $22.49 (1431⁄32” x 323⁄32” x 3⁄16”) General 50-220, 50-090K, Jet 10” Workshop, JPS-10 Pro-Shop (708482, 708480K) 400-1104 24.99 22.49 (151⁄8” x 3¾” x 1⁄8”) Hitachi C10FL, C10LA; Porter Cable PCB270TS 400-1130 26.99 24.29 (147⁄16” x 4” x 7⁄16”) Powermatic 66 400-1110 24.99 22.49 (177⁄8” x 4¼” x 7⁄16”) Powermatic PM2000 With Knife Slot 400-1111 34.99 31.49 (14 x 3¾” x 3⁄16”) Sears 10” belt drive (1977 to 2004), Rigid TS2412/TS2424/TS2400 400-1113 25.99 23.49 (143⁄8” x 3¾” x 3⁄16”) Sears Older 10”: 113.29901, 113.29903, 113.299040, 113.29943, 113.299142 400-1114 26.99 24.29 (143⁄8” x 3¾” x 3⁄32”) Sears 400-1115 27.99 25.19

Feed Safe™ Hold-Downs

Make cleaner and safer cuts using our even pressure hold-down device. This unique design keeps your material pressed firmly downward and inward against the rip fence. The special composite material wheels will not mark your work. Use the single direction wheels on router tables, table saws and bandsaws to reduce the chance of kickback. An optional mounting track allows flexible positioning of the hold-downs on your fence (includes 1 piece of track and 2 piece sliding mounts). Feed Safe Wheels 415-9725 $55.99 Feed Safe 24" Track 415-9727 29.99 COMBO Combo Feed Safe Hold-Down Kit (includes Feed Safe Wheels and 24" Track) $5.99! 415-9728 If Sep. 85.98 Kit $79.99

SAVE

Digimag Digital Remote Readout

Additional Zero Clearance Inserts at EagleAmerica.com

Clear-Cut TS™ Stock Guides for Table Saw

Holds wide boards or large panels! • Unique guide rollers on the stock guides are mounted on a 5° angle, securely pulling your stock tightly toward the fence. • The roller arm holds work firmly in place, under spring pressure, forcing the workpiece to move in one direction only. • Set-up is fast, and the stock guides can also pivot out of the way and tuck behind the fence if needed. • TS™ Stock Guides mount to most commercially available saw fences and with our t-track you have complete adjustability • Guides have 31/8" total vertical travel and can accomodate max stock thickness 13/16" above the mounting surface when mounted with t-track • All components are CNC machined. Guides from solid anodized aluminum, axles are CNC machined from case hardened, cold rolled steel, and the bar and spring clamp are stainless steel. 415-6518 $249.99

Add a digital readout to your table saw Works with most table saw fence systems. Remote display features a 52' cord. The large display reads in inches, fractions (1⁄64") or millimeters. Decimal inches are displayed in .001" increments and millimeters in .05mm increments. Mounting hardware included. 6” Bar Digimag Digital Remote Readout 424-0160 $54.99 24” Bar Digimag Digital Remote Readout 424-0164 64.99 35” Bar Digimag Digital Remote Readout 424-0166 69.99

Table Saw Calibration and Sanding Disc

5⁄8" arbor. Mount the 10" x 1⁄8" steel plate in place of your saw blade to accurately align your saw or apply the self-adhesive sanding disc and turn your table saw into a disc sander. Includes one 120 grit self-adhesive backed sandpaper disc. Table Saw Calibration and Sanding Disc 510-1000 $39.99 Sandpaper Disc, 80 Grit 510-1080 4.99 Sandpaper Disc, 120 Grit 510-1120 4.99 Sandpaper Disc, 150 Grit 510-1150 4.99 7-Piece Value Package Includes Sanding Disc & 2 Discs of Each Grit. 510-1999 If Sep $64.94 Set $49.99

www.EagleAmerica.com / 1-800-872-2511

55

Easily and safely rip thin strips on your tablesaw Thin Rip with table saw

Make repetitive ripping of thin strips safer and easier. Because Thin Rip with bandsaw the strips are cut on the lefthand side of the blade, there is no burning, binding or kickback. Made from heavy-duty aluminum extrusions. The Thin Rip jig locks securely in any ¾"W x 3⁄8"H miter gauge slot while a built-in scale helps you make fine adjustments. The ball bearing holds the stock firmly against the fence, allowing for a smooth feed rate and simple fence repositioning. 400-1040 $29.99

Miter Saw Laser Guide

SAVE

Add laser accuracy to your miter saw UP TO Easy to install and use, just replace the $ 13! outside ⅝" arbor blade washer with the self-aligning Laser Guide. Provides a clean, bright, easy to see beam of red light that turns on and off automatically. Includes batteries, hex wrench, mounting screws, and nylon case. Fits most 7" to 12" miter saws.

56

Save $13! 485-3515 $26.99 Save $11! 485-3518 28.99

1½” - 3” (Set of 2) 3½” - 4½” (Set of 2)

400-1042 400-1043

Tool Clad Magnetic Tool Covers

$16.99 19.99 n li n

e

Cut tapered legs and pieces the easy way Make tapered cuts up to 15°. Made from rugged extruded aluminum and features a reversible handle and material stop block for both right and left hand use. 420-5800 $24.99

Never damage your fence face again! Attach just about any sacrificial fence, re-saw fence, half fence or any other fixture to your fence without having the clamp interfere with your work. Drill a ⅜" hole at the top of each end of your sacrificial fence, tighten the clamp against your original fence and you are ready to cut. You can also use one clamp at any location along the fence as a stop block.

Protect your cast iron and steel tables from spills and corrosion. These thick plastic covers adhere magnetically to seal out humidity and are thick enough to cushion the surfaces from dings and dents. UP TO Table Saw Cover (A) is imprinted $10! with a deluxe protractor guide, drill table, geometric formula chart, wood hardness chart and other useful information plus there’s plenty of space to make notes with a dry erase marker. 28" x 44". Band Saw Cover (B) includes a blade guide, blade length calculations, TPI usage guide and minimum blade radius. 20" x 20". Scroll Saw / Drill Press Cover (C) has a 1" grid and concentric circles every ½". 16" x 24". USA ide

v

Taper Jig

Miter Saw Guide Radial Saw Guide

o

See Special on Fence Clamp page 77

$49.99 49.99 49.99

o

Thin Rip Tablesaw Jig

n li n

Add muscle to your grip ide The Gorilla Gripper provides maximum grip and lift leverage to safely carry drywall, plywood, doors and cumbersome sheet goods. The aluminum gripper plates and their rubber pads clamp the sheet materials securely while the comfort grip handle cushions your hand. USA Grip Size General Purpose 0” to ¾” 718-0458 Contractor 3⁄8” to 11⁄8” 718-0460 Door Gripper 1¼” to 2” 718-0462

o

SALE

Gorilla Gripper

v

Measure setup angles accurately CNC machined to a squareness of ± 0.0005" with a U.S. made navigational sensor, offering ± 0.2° accuracy with a resolution of 0.05° at a range of ± 90°. The large LCD screen makes it easy to read while strong magnets hold the unit to any steel or cast iron surface. Spare $24.99! battery included, mea- SAVE $15 sure 23⁄8" x 23⁄8" x 13⁄8". $24.99 424-0128

e

Digital Angle Cube

o

Table Saw Essentials

SAVE

A Table Saw Cover Save $10! 492-5500 $44.99 B Band Saw Cover Save $3! 492-5502 18.99 C Scroll Saw / Drill Press Cover Save $3! 492-5504 14.99

Table Saw and Tool Blades Power Tool Cutting Guide

Rip-Cut™

Add muscle to your grip

Rip sheets of plywood in half – in just one cut!

This cutting guide will easily handle large sheet goods. The two 55" long extrusions can be joined together using the included connector, which is extra-long to prevent the two joined extrusions from flexing under pressure. The cutting guide is secured to the work piece by a pair of one hand adjustable toggle clamps that slide in the underside of the aluminum extrusion. Compatible with both the 448-9954 Router Plate and 448-9955 Saw Plate. 415-6209 $79.95

Slick Strip™ Rolls

Stock slides like glass! This special plastic film creates a frictionless surface area for your stock to glide against. These self-adhesive strips can be cut to desired size. Ideal for fences on saws, router tables, shapers and more. USA Width Length Thickness 2+ea. ¾” 9’ (108”) .010” 400-1158 $6.99 $6.49 3” 3’ (36”) .030” 400-1157 $8.99 – 3” 10½’ (126”) .010” 400-1159 19.99 17.99

Slick Strips and Plates

Make your jigs and patterns slide like glass! UHMW plastic is a hard, non-stick, slippery material. Great for making sub-bases, patterns, jigs, shop fixtures, runners, and fences. USA Size 2+ea 3⁄8” x ¾” x 24” 400-2424 $7.99 $7.49 3⁄8” x ¾” x 36” 400-2436 8.99 8.49 1⁄8” x 4” x 36” 400-2512 9.99 9.49 ¼” x 4” x 36” 400-2525 15.99 14.99 ½” x 4” x 36” 400-2550 24.99 23.99 ¾” x 4” x 36” 400-2575 30.99 29.99 117⁄8” x 117⁄8” x ¼” 400-2412 14.99 14.49

• Connects to most circular saws – right or left blade • Reversible Guide Arm for right or left hand use • Rip cuts up to 24" wide • No measuring, marking, and no chalk lines • 100% Guide support through entire cut • No need to remove when doing cross cuts • Quick, accurate adjustments. No tools required! • Light yet sturdy design for use on the jobsite

Simplify the process of ripping down large plywood and MDF panels. The Rip-Cut™ easily attaches to almost any circular saw, letting you accurately cut pieces up to 24" wide. The Rip-Cut™ features a very durable design, including a solid aluminum guide rail, and easy-to-read adjustable scale. The reversible guide arm works whether you’re left or right handed and whether the blade is on the left or right side of the saw. 485-0285 $34.99

Digital 3-in-1 Multi Gauge

It’s a depth gauge, height gauge and thickness gauge! Unbeatable accuracy! Measures 0" to 6" with $ 19.99! a super large easy-to read SAVE $5 LCD display, and on/off zero set functions. Displays inches, metric, and fractions (with easy, one-button switching)! Measure horizontal, vertical, or at a 90° angle. Metal rule is self-standing on a heavy-duty polycarbonate frame. Includes flat and point hardened steel anvils that measure welding thickness, routing and slot depth.

SALE

• Measure Routing Depth from 0-3.10" (beam goes up from surface) • Measure Slot Depth from 0-2.90" (beam goes down from surface) SALE!

• 70°, 80°, and 90° angles on gauge body • Will read to within 0.0005" and accurate up to 0.001"/per 1" • Battery included

SAVE $5! 424-0168 $19.99

www.EagleAmerica.com / 1-800-872-2511

57

Bandsaw Essentials All Pro Blades Mix or Match Savings! % Our premium quality blades... fit any brand machine Buy Any 2+ Bandsaw Blades & Save 10% Made from special high alloy tool steel combined with pinpoint carbides, molybdenum, silicon and chrome to enhance performance and blade longevity. The teeth are extra hard (64-66Rc) and have improved chip evacuation, cutting speed, and to provide a surface requiring less sanding. These premium blades are longer lasting, more durable and controllable than standard Flex Back blades. USA

SAVE 10

Length 1⁄8” x 14 TPI Regular 80” 654-8021 $17.49 82” 654-8221 $17.99 93½” 654-9321 $18.99 105” 654-9921 $19.99 133” 137”

3⁄16” x 10 TPI ¼” x 6 TPI 3⁄8” x 4 TPI ½” x 3 TPI 5⁄8” x 3 TPI ¾” x 3 TPI 1” x 2 TPI Regular Regular Skip Hook Hook Hook Hook 654-8022 654-8023 654-8024 654-8025 $17.49 $17.49 $17.49 $17.99 654-8222 654-8223 654-8224 654-8225 $17.99 $17.99 $17.99 $18.99 654-9322 654-9323 654-9324 654-9325 654-9326 654-9327 $18.99 $18.99 $18.99 $19.99 $22.99 $24.99 654-9922 654-9923 654-9924 654-9925 654-9926 654-9927 $19.99 $19.99 $19.99 $20.99 $24.99 $26.99 654-9940 654-9941 654-9942 654-9943 654-9944 654-9945 654-9946 $24.99 $24.99 $24.99 $24.99 $29.99 $31.99 $32.99 654-9950 654-9951 654-9952 654-9953 654-9954 654-9955 654-9956 $25.99 $25.99 $25.99 $25.99 $30.99 $32.99 $33.99

Hard Edge Flex Back Blades Visit www.EagleAmerica.com for complete blade listing. Scroll

General Purpose

Contour

Resaw

1⁄8” x 3⁄16” x 3⁄16” x ¼” x ¼” x ¼” x ¼” x 3⁄8” x 3⁄8” x ½” x ½” x ½” x ¾” x Length 14 tpi 4 tpi 10 tpi 4 tpi 6 tpi 10 tpi 14 tpi 4 tpi 6 tpi 3 tpi 3 tpi 6 tpi 3 tpi Regular Skip Regular Skip Hook Regular Regular Skip Hook Hook Skip Regular Hook *561⁄8” 654-5601 654-5605 654-5608 654-5610 $13.99 $12.99 $12.99 $12.99 *Note: All 561⁄8” and 59¼” blades are Hook Style Blades, ONLY. *59¼” 654-5901 654-5906 654-5909 $13.99 $12.99 $12.99 71¾” 654-7101 654-7103 654-7104 654-7105 654-7107 654-7108 654-7110 654-7111 654-7112 654-7113 - 72 $14.99 $12.99 $12.99 $12.99 $12.99 $12.99 $12.99 $12.99 $12.99 $12.99 72½” 654-7201 654-7202 654-7203 654-7204 654-7205 654-7208 654-7209 654-7210 654-7211 654-7212 654-7213 $14.99 $12.99 $12.99 $12.99 $12.99 $12.99 $12.99 $12.99 $12.99 $12.99 $12.99 80” 654-8001 654-8002 654-8003 654-8004 654-8005 654-8007 654-8008 654-8009 654-8010 654-8011 654-8012 654-8013 $15.99 $13.99 $13.99 $13.99 $13.99 $13.99 $13.99 $13.99 $13.99 $13.99 $13.99 $13.99 82” 654-8201 654-8202 654-8203 654-8204 654-8205 654-8207 654-8208 654-8209 654-8210 654-8211 654-8212 $15.99 $13.99 $13.99 $13.99 $13.99 $13.99 $13.99 $13.99 $13.99 $13.99 $13.99 92½” 654-9201 654-9202 654-9203 654-9204 654-9205 654-9207 654-9209 654-9210 654-9211 654-9212 654-9213 654-9214 $16.99 $15.99 $14.99 $14.99 $14.99 $14.99 $14.99 $14.99 $14.99 $14.99 $14.99 $17.99 93½” 654-9301 654-9302 654-9303 654-9304 654-9305 654-9307 654-9309 654-9310 654-9311 654-9312 654-9313 654-9314 $16.99 $15.99 $14.99 $14.99 $14.99 $14.99 $14.99 $14.99 $14.99 $14.99 $14.99 $17.99 105” 654-9901 654-9902 654-9903 654-9904 654-9905 654-9907 654-9909 654-9911 654-9912 654-9913 654-9914 $17.99 $15.99 $15.99 $15.99 $15.99 $15.99 $15.99 $15.99 $15.99 $15.99 $19.99

Urethane Bandsaw Tires

Blade Lubricant Stick

Zero-Clearance Inserts

Bandsaw 12” 14” 18”

Prevent chip and pitch build-up on all wood, plastic and metal saw blades. Simply feed lubricating stick into moving blade until teeth are thoroughly coated. Great for scroll saws too. Handy 8" x 1" Stick. USA 485-7010 $7.99 2+ $7.49 ea

Bandsaw O.D. I.D. 14” 2½” 21⁄8” 485-2000 $12.99 Jet 12” & 14” 2½” ¾” 485-2002 12.99

Longer lasting, easy to install Trim to fit. No glue required. Sold as set of 2. USA

58

Length Width 36” 1” 485-1412 $41.99 41½” 1” 485-1414 47.99 55½” 1½” 485-1419 59.99

Reduce unsightly tear-out Inserts are 3⁄16" thick with a 3⁄32" lip and fit most 10" to 14" bandsaws. Pkg. of 4. USA

Scroll Saw Essentials and and Adhesives Buy Any 3+ Scroll Saw Blades and SAVE 10% Scroll Saw Blades 5" Long Plain End Standard Skip Tooth Fast and cool cutting, with smooth finish Univ. Width Thick TPI 12 pk 3+ ea 3/0 .022 .008 33 631-2208 $3.99 $3.59 2/0 .022 .010 28 631-2228 3.99 3.59 2 .029 .012 20 631-2920 3.99 3.59 4 .035 .015 15 631-3515 3.99 3.59 5 .038 .016 12.5 631-3812 3.99 3.59 7 .045 .017 11.5 631-4511 3.99 3.59 9 .053 .018 11.5 631-5309 3.99 3.59 12 .062 .024 9.5 631-6209 3.99 3.59 Reverse Skip Tooth Splinter free cutting Univ. Width Thick TPI 12 pk 3+ ea 2/0R .026 .011 28/21 632-2628 $3.99 $3.59 2R .029 .012 20/14 632-2923 3.99 3.59 5R .038 .016 12.5/9 632-3815 3.99 3.59 7R .045 .017 11.5/8 632-4711 3.99 3.59 9R .054 .019 12/8 632-5412 3.99 3.59 12R .062 .024 9.5/6 632-6208 3.99 3.59 Spiral Blades Cut in any direction Univ. Width Thick TPI 12 pk 3+ ea 0 – .032 46 634-3246 $3.99 $3.59 2 – .035 41 634-3541 3.99 3.59 4 – .041 36 634-4136 3.99 3.59

Professional Strength F Instant Glues A

B

C

D

Precision Band Saw Fence

A new level of band saw accuracy • Adjusts for blade drift • Pre-drilled holes on the mounting rail fit most 14" band saws and can be easily modified to fit others • Can be changed to low-profile position • The face and top of the fence accepts re-saw guides or Kreg® Stops • Precision Lens Cursor for exact measurements • Removes quickly from mounting rail in seconds

The fence adjusts to set up perfectly square to your table and blade. Two simple adjustments allow you to set the fence to match blade “drift” angle, for precise cuts. The aircraft-grade, anodized aluminum fence is incredibly strong, straight, and built to last. The mounting rail is 26" (660mm) long and fence is 18" (457mm) long. Includes mounting rail and hardware, clamp block with Precision Lens Cursor, (1) Kreg® Heavy-Duty Trak, adhesive-back measuring tape, and owner's manual with complete instructions for mounting and adjustment. 400-4189 $119.99

Double-Faced Tape E

Quick bonding, industrial cyanoacrylate adhesives are great for turnings, carvings, and repairs! Available in a variety of formulas and setting times. Will bond leather, wood, glass, rubber, metal, ceramics, most plastics... almost anything. Use only a small amount and don’t forget to have the solvent handy. USA Mix/Match 4+ ea. A HOT STUFF ADHESIVE-Thin, Bond Time 3-5 sec., 2 oz. Bottle. 447-6010 $10.99 $10.44 B SUPER-“T” ADHESIVE-Med., Bond Time 10-25 sec., 2 oz. Bottle. 447-6020 10.99 10.44 C SPECIAL-“T” ADHESIVE-Thick, Bonding Time 20-50 sec., 2 oz. 447-6030 11.99 11.39 D SUPER SOLVENT-Removes and dissolves all instant glues. 2 oz. bottle. 447-6040 8.99 8.54 E REPLACEMENT TIPS (2 pk) 447-6060 2.49 2.37 F ACCELERATOR, 6 oz. 447-6056 12.99 12.34 If Sep. Set 5-Piece Value Set A, B, C, D & E 447-6005 $45.45 $39.99

Ideal for holding patterns together prior to cutting. Simply apply tape to one piece, peel off backing strip, position, and apply with light pressure. USA Sizes ¾” x 54 feet 447-7149 $8.95 ¾” x 108 feet 447-7150 13.95 1” x 108 feet 447-7151 15.95 2” x 108 feet 447-7155 26.95

Powerful Rare Earth 80 Piece Magnets Set SAVE 50% Dozens of uses

SALE

from door catches, to holding tools and utensils, SAVE 50% to toys and projects. These powerful magnets can be glued with epoxy. The set includes 30 magnets (¼" dia.), 30 magnets (3/8" dia.), and 20 magnets (½" dia.). All magnets are 1⁄8" thick. SALE!

490-0267 Reg. $61.93 $30.95

www.EagleAmerica.com / 1-800-872-2511

59

Pocket Hole R3 Jig

o

e

n li n

v

The Kreg K4 makes pocket hole joinery faster, simpler and stronger. It adjusts for material thickness from ½" to 1½" thick in 1⁄8" increments, while the material support stop allows you to quickly repeat pocket Dust Collection Attaches to Any 1¼” Hose for a Cleaner Shop. hole locations. USA System Includes: • Drill Guide Block • Clamping Base • Portable Base • Dust Collection Shroud • Material Support Stop • Face Clamp • Drill Bit • 6" #2 Driver Bit • 3" #2 Driver Bit • Depth Collar • Allen Wrench • Screw Samples • Carrying Case

e

o

o

v

ide

Economical and portable pocket hole system Independent moving sliders on the jig can be set to 9 different positions for n li n ½" to 1½" ide thick material. Wood chip relief holes remove chips rapidly, reducing bit wear and effort needed. Clamp adapter allows standard C-clamps or optional face frame clamp to hold the jig. Case includes: a step drill bit, depth collar, allen wrench, square driver bit, depth collar setting gauge, screw selection chart, and a selection of self tapping screws and plugs. Works with both 2" and 6" face clamps. 400-3188 $39.99 o

K4 Master System

The ultimate package for pocket hole joinery

System Organizer

Store and organize a Kreg Jig®, plus Kreg® accessories like clamps, bits, drill guide blocks, screws, and more in this durable polymer case with heavy duty clasps. Features a transparent lid and removable 2-pc insert for storage versatility. Size: 18" x 15¼" x 6⅝". The custom insert holds:

o

o

v

60

e

• 1 Kreg Jig® (either K5, K4, or K3 model) • Kreg K5 storage wings • 4 std. stepped drill bits • 7 standard 6" or 3" Interchangeable Drill Part of the insert can be square-drive bits Guide Blocks Quickly removed for storage of: Change Front-Side • 3 stop-collar hex wrenches • Up to 6 Kreg® screw Clamping Base to ™ • Micro-pocket drill Portable Base 500-pc containers guide block • Additional clamps • 2 Micro-pocket drill bits K4 Master Pocket Hole System 400-3179 $139.99 • Kreg® Shelf-pin Jig ® • Kreg Jig HD (heavy-duty) K4 Jig Only 400-3157 99.99 • Compact drills and plus HD Jig® drill bit and 15’ Hose, with 2¼” Opening 489-7115 59.99 drivers square-drive bit Adapter - 15’ Hose to K4 System 489-7104 9.99 ® ® A large handle makes • Kreg clamps • 6 Kreg transport easy. screw 100-pc containers Mini Pocket Hole Kit Kreg System Organizer 400-3133 $39.99 The ideal tool for tight spots This economic single hole Face Clamp pocket kit The clamp’s large pad includes the jig, keeps wood from being pocket hole bit, marred. stop collar and n li n wrench. Make Throat Depth Opening ide pocket holes 3” 2¾” 448-6205 $22.99 one at a time in those small, hard to reach places. Features include hardened steel drill guide and Replacement Parts glass reinforced nylon body complete with a chip extraction hole and a plug setter that is incorporated into the base of the jig. 400-3158 $19.99 3⁄8” Counter Bore Drill Bit with Stop Collar 400-3152 $22.99

Pocket Hole 675-Piece Pocket Hole Screw Kit

Convenience and variety all in one Kit Contains: 150 each of #6 x 1" fine panhead, #7 x 1" coarse pan-head, #7 x 1¼" fine washer-head, #8 x 1¼" coarse washerhead, and 75 of #8 x 2½" coarse washerhead. All screws are #2 square drive, self-tapping. Case included. 400-3183 $29.99

K5 Master System

Includes the K5 Pocket Hole Jig plus Automaxx Face Clamp and Portable Base

Square Drive Pocket Hole Screws Pack of 100 Pack of 500 #6 x ¾” Fine Pan Head 400-3116 $3.99 400-3117 $15.99 #6 x 1” Fine Pan Head 400-3137 4.79 400-3138 18.49 #6 x 1¼” Fine Pan Head 400-3120 4.89 400-3139 18.99 #6 x 1½” Fine Pan Head 400-3124 4.99 400-3140 19.49 #7 x 1” Coarse Pan Hd 400-3141 4.99 400-3142 19.49 #7 x 1¼” Fine Washer Hd 400-3143 5.09 400-3144 19.99 #7 x 1½” Fine Washer Hd 400-3125 5.39 400-3126 20.99 #8 x 1¼” Coarse Washer 400-3145 5.19 400-3146 20.49 #8 x1½” Coarse Washer 400-3127 5.49 400-3128 21.99 Pack of 50 Pack of 250 #8 x 2½” Coarse Washer 400-3131 6.99 400-3130 22.99

90° Corner Clamp

Assemble drawers and position shelves fast The self squaring design aligns work pieces, making it easy to secure and achieve individual joints at a perfect 90° angle, every time. The L-Handle quickly and easily adjust for varying stock thicknesses up to 1¼". Large, non-marring, clamping surface. 448-6225 $34.99 3+ $31.99 ea

DIY Project Kit

3 Must-Have Tools and Plans for custom projects • Rip-Cut™ cuts plywood and other sheet goods quickly and accurately • Kreg Jig® R3 creates pocket-hole joinery in the strongest and fastest way possible • Shelf Pin Jig drills repeatable, perfectlyplaced shelf-pin holes for custom adjustable shelving (includes 5 mm bit) With Free downloadable, step-by-step plans for 10 custom home projects.

Use with materials from ½"- to 1½"-thick.

400-1830 $99.99

• The front-mounted clamp handle makes clamping easy. Ratcheting clamp mechanism adjusts "tight" against work without tools • Quick-release pin holds drill block in place, and can't get lost • Support Wings provide built-in storage for bits, screws, accessories • Stop-Collar Setting Block • Automaxx® automakes drill bit setup easy adjust face clamp • Swiveling Dust-Collection allows clamping pieces Port accepts a standard of varying thicknesses 1¼" vacuum hose automatically. • Adjustable Workpiece • Portable Base provides Stop mounts on either simplified setup for side for easy repeat drilling portable building

Creating Joints: Select a screw based on wood thickness, set the Stop Collar using the Drill Bit Setup Block, pull the spring loaded pin to adjust the Drill Guide Block. The clamping mechanism adjusts to match workpiece thickness. Slide the clamp block into place, pull the front-mounted clamp handle up until it "clicks" twice, push it back down, and your jig holds the workpiece tight. Fully assembled kit includes: • Base with Ratcheting • Portable Base accepts Drill Guide Block for Front Clamp portable use • Extension Wings • 6" Driver Bit, Stop Collar • Swiveling Dust Port • Allen Wrench • Drill Guide Block • User Guide • Spacer Block • Starter Screw and • Workpiece Stop Plug Pack • Drill Bit Setup Block • Online Videos and • Automaxx Face Clamp Downloadable Project Plans • Hex Stepped Drill Bit Kreg K5 Master System® Kreg K5 Pocket Hole Jig®

400-3132 $169.99

SAVE $10! 400-3135 129.99

www.EagleAmerica.com / 1-800-872-2511

61

Woodboring Forstner Bits

10" Forstner Bit Extender. With no-slip hex shanks. Use with bits with drilling diameter over ¾". Fits both hex and round shanks. 301-0107

$12.99

5" Forstner Bit Extender. With round steel shank, for ⅜" forstner bits (under 2¼" cutting diameter). Twin locking set screws hold the bit. 301-9270 $8.99

62

300-7116

o

o

v

Forstner Bit Extenders

3⁄8” Shank

Forstner Bit Sets in wood storage boxes

e

Our forstner bits are made of n li n high quality carbon steel. Sizes ide 1" and larger feature a saw tooth multi-spur design. Bits have 3/8" diameter heat treated shanks for use with drill presses or hand drills. Sizes greater than 21/8" have ½" shanks. Wave Cutter “wavy” cutting rim produces less heat for considerably longer tool life. Forstner Bits Wave Cutters ¼” 310-0410 $3.99 — — 5⁄16” 310-0510 4.49 — — 3⁄8” 310-0610 4.79 — — 7⁄16” 310-0710 4.99 — — ½” 310-0810 5.29 — — 9⁄16” 310-0910 5.49 — — 5⁄8” 310-1010 5.99 — — 11⁄16” 310-1110 6.49 — — 18mm (for dimes) 310-1120 6.49 — — ¾” (19.1mm for pennies) 310-1210 6.99 — — 13⁄16” 310-1310 7.29 — — 21.3mm (for nickels) 310-1320 7.29 — — 7⁄8” 310-1410 7.49 310-1420 $21.99 15⁄16” 310-1510 7.59 — — 1” 310-1610 7.79 — — 11⁄16” 310-1710 7.89 — — 11⁄8” 310-1810 7.89 — — 30mm 310-1910 7.89 — — 30.6mm (for half dollars) 310-1920 7.99 — — 1¼” 310-2010 7.99 — — 13⁄8” (35mm) 310-2210 9.49 — — 1½” 310-2410 9.79 — — 15⁄8” 310-2610 10.79 — — 1¾” 310-2810 10.99 310-2820 39.99 17⁄8” 310-3010 11.49 310-3020 40.99 2” 310-3310 12.29 — — 21⁄8” 310-3410 12.99 — — 2¼” 310-3610 14.99 — — 23⁄8” 310-3810 16.99 — — 2½” 310-4010 18.99 — — 2¾” 310-4410 20.99 — — 3” 310-4810 26.99 — — 31⁄8” 310-5010 28.99 — — 3¼" 310-5210 29.99 — — 3½” 310-5610 32.99 — — 37⁄8” 310-6210 39.99 — — Additional sizes available at EagleAmerica.com

SAVE 35!

Hex Shank 16 Piece Forstner Bit Set ¼" to 2 1/8" in 1/8" increments 300-7116 $44.99

NEW!

Hex Shank 31 Pc. Forstner Bit Set ¼" to 2 1/8" in 1/16" increments 300-7131 $109.99

SAVE

PRO Hex Shank 16 Pc. Forstner Set Premium steel, professional quality! ¼" to 2 1/8" in 1/8" increments 300-7118 $74.99

$

17!

$

300-7107

Hex Shank 7 Piece Forstner Bit Set

SAVE $10!

¼" to 1" in 1/8" increments 300-7107 $19.99 Additional sets available at EagleAmerica.com

Coin Size Forstner 6 Bit Set Quickly and easily inlay coins

Create unique keepsake coin holders for collectors or any type of coin inlay. Inlay a coin on the bottom of a project to create a unique signature date. Forstner bits are marked with: penny, nickel, dime, quarter, half dollar, and dollar. Includes: depth stop collar, 2 depth stop locking rings, 6 coin size forstner bits, and hex head key wrench for depth stop ring adjustment. 300-7120 $39.99

Forstner Bit Depth Stop

Easily control your drilling depth Specially designed for forstner bits and any other style drill bit up to 21/8" in diameter. Has a built Forstner bit not included in bearing that keeps the stop motionless while forstner bit spins, allowing stop to rest on the stock without marking or burning wood. Includes three different bushings to fit on forstner bits with a shank diameter of: 3/8", 7/16", 9/16". 301-0109 $29.99

Woodboring Professional Wide Capacity Self-Centering Dowel Jig

SALE $54.99!

Simple, accurate, quick Anodized aluminum body with hardened steel guides, the jig handles material from ¼" to 6" thick. Two accurate guide holes are tapped for the supplied bushings to let you drill three sizes of holes on ¾" center with one clamping. Includes two bushings each; ¼", 5⁄16", and 3⁄8", plus two fixed holes measuring 7⁄16" and ½". See web for dowels. Reg. $69.99 445-7600 $54.99

Sanding Drum Kits

Turns drill press into spindle sander

SALE

15 Pc. Kit

Sleeves feature SAVE $4 smooth action cloth backed aluminum oxide resin bond abrasives. USA 15-Piece Sanding Drum Kit (A): Includes 5 drum sizes; ½" x ½", ¾" x 1", 1" x 1", 1½" x 1½", 2" x 1½"; with one fine (120 Grit) and one coarse (50 Grit) sleeve for each drum size. All drums are ¼" shank except the ½" x ½" which is 1⁄8". 12-Piece Extra Long 2" Sanding Drum Kit (B): Includes 4 drum sizes: ½" x 2", ¾" x 2", 1" x 2", 1½" x 2"); with one fine (120 Grit) and one coarse (50 Grit) sleeve for each drum size. All drums ¼" shank. 9-Piece Super Long 3" Sanding Drum Kit (C): Includes 3 drum sizes: ½" x 3", 1" x 3", 1½" x 3"); with one fine (120 Grit) and one coarse (50 Grit) sleeve for each drum size. All drums are ¼" shank.

A 15-Piece Sanding Drum Kit B 12-Piece Extra Long Kit C 9-Piece Super Long Kit SAVE! 36-Piece Set A, B and C

Drill Press Table

WINTER

SALE

Winter Sale Package

SAVE $55! Ends 2/28/17. • Drill Press Table Featuring a universal • Wheel & Circle Cutter (P. 64) mounting system! Add • T-Track Hold Downs (below)

versatility and precision to your drill press with this 12" x 24" drill press table. Made of ⅞" thick MDF/melamine. Includes two T-Tracks for track mounted accessories, and an adjustable fence that guarantees maximum holding power. A fence mounted stop block makes repetitive cuts and the removable table insert can be drilled for any size sanding drum. Easily adapted to fit all drill presses. Replacement inserts at EagleAmerica.com WINTER SALE PACKAGE! 415-9762 List $124.95 $69.95

T-Track Hold Downs

Metal T-track clamps work on any t-track that accepts a ¼" or 5⁄16" hex head bolt. The T-shaped base and 1" round brass hold down secures stock from ¼" to 2" thick against the table, or use on jigs that have a T-track. Can be used to mount stop blocks onto the T-track on a drill press or router table fence face. Sold as a pair. 415-9441 List $35.99 $29.99

“Jumbo” Drill Press Table

500-1115 SALE! $15.99 500-1112 19.99 500-1109 20.99 500-1136 If Sep $60.97 $49.99

3-Piece Forstner Sharpening Kit

Don't replace... Sharpen! Renews dull forstner bits. Includes a 600 grit rectangular hone, a 600 grit triangular hone, a ceramic cone bit for honing different angles of a forstner bit and instructions.

SALE $17.99!

SAVE $11

415-9171 $17.99

A clever fence design allows full drill press handle clearance without having to move the fence! Add versatility and precision to your larger bench top and floor standing drill presses. This jumbo 20" x 30" drill press table is made of ⅞" MDF/melamine. Includes two T-Tracks for track mounted accessories. The adjustable fence ensures maximum holding power. A fence mounted stop block makes repetitive cuts and a removable table insert accommodates sanding drums. Replacement inserts available at EagleAmerica.com 415-9778 List $119.99 $84.95

www.EagleAmerica.com / 1-800-872-2511

63

Woodboring 8-Piece Plug Cutter and Tenon Set WINTER

SALE

No slip hex shanks SAVE $18! Ends 2/28/17. Straight cutters are used for making plugs and small tenons up to 1" long. Tapered cutters are used for tighter fitting plugs that become almost invisible after sanding and finish. Includes ¼", 3⁄8", ½", 5⁄8" and case. SALE! 341-4922 $29.99

5-Piece Plug and Tenon Cutter Set No slip hex shanks Make tenons or plugs up to 3" long. Unique side opening quickly ejects wood chips for fast, smooth operation. Each tool features 4 or 5 cutting spurs. Wood storage box included. Sizes: 3⁄8", ½", 5⁄8", ¾", 1". 320-9005 $64.99

Diamond ground tips • Patented TwinLand® 25° flute brad-point drill bit • Alloy steel can be used with soft, hard, exotic, veneered and laminated wood • Bits larger than ⅜" have reduced shanks to fit ⅜" drill chucks Roll-Forged Flutes and Diamond Ground Tips for sharper, longer life. Comes in a vinyl pouch. Includes sizes: ⅛", 3/16", ¼", 5/16", ⅜", 7/16", and ½". 302-2020 $19.99

7 Piece Extra Long Brad Point Drill Bit Set This 7 piece set with 12" long brad point drill bits comes packaged in a vinyl pouch. Includes sizes: ⅛", 3/16", ¼", 5/16", ⅜", 7/16", ½".

415-9150 $19.99

5 Piece “Jumbo” Brad Point Drill Bit Set

Packaged in a wood box. Includes sizes: 9/16", ⅝", ¾", ⅞", and 1".

64

415-9174 $25.99

SALE

Cut any wheel or circle up to 6½" diameter SAVE $15! Ends 2/28/17. Set the high-speed steel cutter to the radius you require and chuck the hex shank into your drill press to cut perfect wheels or circles. The reversible cutter can be quickly changed from cutting wheels to cutting circles from 1¼" to 6½" in diameter. Drills a ¼" pilot hole. Wheel & Circle Cutter Reg. $34.99 301-0110 $19.99 Replacement blade & Allen wrench kit 301-0111 7.99

Drill Press Rosette Cutters SALE! For door, windows or boxes. These cutters have extra thick carbide tips that outlast and out-cut steel cutters by up to 50 times! C

TwinLand® 7 Piece Brad Point Drill Bit Set

WINTER

Wheel & Circle Cutter

D

A

B

E

F

1½” Diameter 2” Diameter 21/8” Diameter 2¾” Diameter A — — 395-4210 395-4230 B 395-4221 395-5010 — — C — — — 395-4232 D — — 395-4215 — E — — — 395-4237 F — — — 395-4239 $49.95 $54.95 $64.95 $69.95

Center-It Jig

Easily cut and drill round objects The sturdy aluminum V-shaped block is 5" long, 4" wide, and 1¾" high which allows you to drill and cut almost any size dowel, pipe, or tube. The jig base has four slots, for easy mounting to your drill press or workbench. 448-5990 $24.99

Self Centering Hinge Drill Bits

B

With No-Spin hex shanks! Self-centering spring action design. Ideal for drilling perfectly centered pilot holes for A door hinges. Adjustable pilot bit allows you to drill for various screw lengths. ¼" hex shank. Drill Size Screw Sizes SALE! A 5⁄64” #2, #3, #4 ✓400-1266 $10.99 $8.95 A 7⁄64” #5, #6 ✓400-1267 11.49 $8.95 A 9⁄64” #8, #9, #10 ✓400-1268 11.99 $8.95 B ¼” – 400-1263 21.99 $8.95 B 5mm – 400-1264 21.99 $8.95 3-Piece Set (5⁄64, 7⁄64, 9⁄64”) ✓400-1279 If Sep $34.47 Set $20.95 NEW! 7-Piece Set (5⁄64, 7⁄64, 9⁄64, 11⁄64, 13⁄64, ¼”, 5mm) 400-1278 If Sep $118.43 Set $34.95

Drilling / Concealed Hinge Jig 7-Piece Taper Drill Bit & Countersink Set High Quality set features “no-slip” hex shanks

SAVE 20%! Our high

speed steel 7-piece hex shank countersink set is designed to follow the taper of screws to give you a flush tight fit every time. For screw sizes #5, 6, 7, 8, 9, 10 and 12. Includes 7 tapered drill bits (⅛", 9⁄64", 5⁄32", 11⁄64", 3⁄16", 13⁄64" and 7⁄32"), 7 matching countersinks, 7 adjustable depth stop collars, and an Allen wrench. Case included. SPECIAL BUY! Save 20%

357-0024 Reg. $49.99 $39.99

25-Piece HSS Brad Point Drill Bit Set

Drill flat bottom holes in hard or soft woods, composites and plastics Brad Point bits won’t move off center through unusual grain or knots. They’re deep fluted to clear chips quickly. Bit size is stamped on the shank. Larger bits have reduced shanks. Includes bits from ⅛" to ½" by 1⁄64" increments. In-between sizes are especially useful for doweling to get a “just right” fit. Metal case with bit holder (and labeled holes) included. 415-9193 $49.99

Drillnado Drill Press Dust Collection and Accessories

Dust collection for your Drill press is finally here! The Drillnado surrounds the drill chuck and drill bit to collect nearly all of the dust. • Drillnado's top housing attaches permanently to the drill press quill. Your shop vacuum or dust collector attaches here. • The expandable housing is removable (to change bits) and attaches to the top housing. The vacuum opening can be positioned right at point of the drill bit. • For 2.6" dia. quills or

SALE $39.99!

SAVE $10

less. 2.17" and 1.57" bushings included. With adhesive strips to adapt to 2.54” and 2.05". dia. quills. • The 1" opening works with most drill and forstner bits. An extra expandable housing increases opening to 1.75" for larger diameter bits.

Drillnado Drill Press Dust Collection SALE! 415-8050 Reg. $49.99 Drillnado Extra Housing 415-8052

$39.99

7.99

Concealed Hinge Jig

Easy cabinet door installation! Drill press accuracy with any hand drill. The Concealed Hinge Jig allows you to drill cup holes for concealed cabinet door hinges (also called "Euro hinges") using just a drill. This economical, easy-to-use jig ensures accurate hinge alignment. Features: • Accurate hinge positioning with built-in indexing tabs. • Repeatable results with built-in measuring scales • Reliable drilling with bit guide and stop collar • Simple to use with any drill-no special tools needed Concealed Hinge Jig Includes: • Adjustable cams ensure • (1) jig base with index cams proper hinge offset • (1) drill guide • Durable carbide-tipped • (1) 35mm carbide-tipped drill bit included drill bit • Strong, lightweight • (1) stop collar with Hex materials for easy wrench handling • (1) owner's manual The jig positions an included carbidetipped bit exactly at the proper position and offset, and drills to the perfect depth every time thanks to depth stop collar. The jig is simple to use, and it ensures that you can mount cabinet doors that fit great Note: A 1/16" bit is required to drill for hinge-mounting screws. Not included. and work properly. Concealed hinges are great for mounting cabinet doors because they stay out of sight, they're adjustable, and they work very well. Mounting them, though, requires drilling a large hole at a very specific position and depth. The Kreg Concealed Hinge Jig takes the guesswork out of drilling those holes, and allows you to do it with nothing more than a drill and the carbide-tipped bit that comes with the jig. The Concealed Hinge Jig consists of a glass-filled nylon base with a hole that receives a drill guide. Indexing cams ensure that the jig positions the bit to drill a hole at the required offset-which is dictated by each hingeand a built-in stop collar ensures that the cup depth is correct every time. There are even holes that you can use to guide a bit for hinge screw holes. The Concealed Hinge Jig comes with a high-quality, carbide tipped bit to ensure great results. Kreg Concealed Hinge Jig 400-1826 $29.99

www.EagleAmerica.com / 1-800-872-2511

65

Triton 3¼ hp Dual Mode Precision Plunge Router

Easy “above-the-table” single wrench bit changes!

WINTER

SALE 10% OFF all Triton Products on this page! Ends 2/28/17

Triton 2½" Palm Sander

A compact, lightweight sander that fits in the palm of the hand. 10% OFF! Ends 2/28/17.

Coupon Code TTSAVE10

Includes sanding belts (80, 100, and 120 grit) and a dust extraction adaptor. Triton Model The efficient 450W WINTER TCMBS motor makes light • Dust Extraction: Yes Finish: work of common Rubber over-mould sanding applications. • No Load Speed: 1115 ft/min Compact 64 x 406 mm belt for intricate work. • Power: 0.6 hp • Height: 5 1/4 " • Length: 10 in. Lock-on switch can be locked ‘on’ to reduce user • Weight: 4.6 lbs • Width: 41/8" fatigue. Quick-release • Sanding Belt Size: 2½ x 16" belt lever. Features: • Sound Pressure LP: 87.6dB • Power Lock On: Yes • Flush side for sanding • Belt Adjustment: Yes up to the edge of the workpiece • Rubber over-moulded • Small diameter front grip increases control roller allows sanding in and safety confined areas • Belt tracking adjustment • Dust extraction adaptor for a cleaner, safer allows the sanding belt working environment to be recentered

SALE

Triton Model TRA001

10% OFF! Ends 2/28/17. Coupon Code TTSAVE10.

The “above-the-table” crank raises and lowers the router under the table, eliminating the need for an expensive lift system! Easy. Automatic spindle lock allows single wrench bit changes through the base. Change from free plunge to fixed base mode with the push of a button. Removable plunge spring for easy lifting and adjustment. Fast plunge depth adjustment with In the box: winder handle. Easy • ½" and ¼" collet access brushes for quick • Multi-function fence & edge replacement. guide (allows circle cutting) Powerful yet precise. The • Wrench • Manual 2400W / 3¼ hp / 15A • Table height winder motor can handle the toughest wood and routing applications. Electronically controlled soft start and variable speed provides the perfect speed for any size router bit. Micro-winder gives fine depth adjustment. Precise pre-set cut depths with 3-stage turret and direct reading scales. Safe. Automatic power lock-off and shaft lock when changing router bits. Fully enclosed guarding shields the cut zone (and also assists dust extraction). Clean. Effective dust port. The side air vents reduce intake of dust into the motor casing when mounted upside-down in a router table. Versatile. Multi-function fence for optimum control during hand-held use and circle cutting. Triton Dual-Mode Router 10% OFF!

66

List $289

415-5631

$289.00

Triton 2½" Palm Sander 10% OFF! 40 Grit Sanding Belts 3pack 10% OFF! 60 Grit Sanding Belts 3pack 10% OFF! 80 Grit Sanding Belts 3pack 10% OFF! 100 Grit Sanding Belts 3pack 10% OFF! 120Grit Sanding Belts 3pack 10% OFF! Combo 40/60/80 Grit Belts 3pack (1pc ea.) Combo 80/100/120 Grit Belts 3pack (1pc ea.)

415-7585 $74.99 415-7590 5.99 415-7591 5.99 415-7592 5.99 415-7593 5.99 415-7594 5.99 415-7595 5.99 415-7596 5.99

Oscillating Spindle Sander

10% OFF! Ends 2/28/17. Coupon Code TTSAVE10

WINTER

SALE

Large 370 x 295mm cast iron table for stability and enhanced material support. Rotating and oscillating action for increased speed and efficiency and precise finishing of intricate work. Triton Includes 6 x 80-grit sanding TSPS450 sleeves 13-76mm dia, with matching rubber drums and table inserts. Stores all accessories. Includes dust port and covered power switch. Triton Oscillating Spindle Sander includes: Rubber Sanding Drums (19, 26, 38, 51 and 76mm), 80 grit Sanding Sleeves (13, 19, 26, 38, 51 and 76mm) 10% OFF! 415-5634 $169.99 Aluminium Oxide Sanding Sleeves - Set of 6 sanding sleeves with cloth backing. Includes sizes 13, 19, 26, 38, 51 and 76mm (½", ¾", 1", 1 ½", 2" and 3". Length 115mm (4½") 80 Grit 10% OFF! 6 Piece 415-5627 $17.99 240 Grit 10% OFF! 6 Piece 415-5628 22.99 150 Grit 10% OFF! 6 Piece 415-5629 19.99

Router Rocky 30 Plunge Base

Rocky 30 Trim Router with fixed base

Increase the versatility of your Rocky 30 Rocky 30 Combo wtih Plunge Base and Fixed Base shown.

Improved base accepts brass template guides! New! Rocky 30 accessories on the back cover

SALE $ 69.95! SAVE $30

Includes a Router Plate, Fence and a Dust Port! SAVE $10! Designed to work • Leveling screws adjust the with the Rocky 30 Trim plate flush with table. Router. Features: • The one-piece fence is • 15⅝" x 11¾", ⅝" thick 2⅞" h x 15½" w. The fence melamine tabletop with position is adjusted via keyhole slots machined MDF core. • Includes 5¾" diam. clear in the tabletop. acrylic router insert plate. • Fence has a 2½" OD dust Center hole accepts 1⅜" port and adjustable router diam. template guide bit safety guard. bushings. Drilled to • Clamp or screw the table accept Rocky 30. Can be into position using three drilled to accommodate countersunk holes near other trim routers. the top’s back edge. SALE! 415-6575 List $59.95 $49.95 NEW! COMBO Mini Trim Router Table with Rocky 30 Router Includes 415-6575 and 415-6550 SAVE 10! 415-6590 List $119.90 $109.95

www.EagleAmerica.com / 1-800-872-2511

o

v

Mini Trim Router Table

e

n li n • Compact and easy to operate i de • High performance 1-HP motor SAVE $30! This heavy duty, variable speed, compact, laminate trimmer/palm router features a durable machined aluminum housing. The High Performance 1-HP motor speed is adjustable from 10,000 rpm to 30,000 rpm via a speed control dial on Rack and pinion system the top of the motor housing. Etched into the aluminum housing is a 1" long rule marked in 1/16" and 1mm increments. The double insulated motor features a spindle• 1-HP Motor adjustable locking button to from 10,000 to 30,000 rpm facilitate single wrench • 1" long rule etched into bit changes. The metal aluminum housing base uses a rack and • Rack and pinion height pinion system to adjust adjustment system the height of the motor and a flip lever to lock the motor at the desired height. In addition, a rubber pad partially wraps the base to provide a positive gripping surface when holding the router in your palm. Accessories included with the kit are a snap in dust extraction port (1½" outlet), a flush trimming attachment, edge guide, a spare set of motor brushes, ¼" router bit collet and a collet wrench. 120 VAC. 415-6550 List $99.95 $69.95

o

The Plunge Base for Rocky 30 Trim Router features a quick release, three turret position depth stop for making repetitive or incremental cuts. Provides up to 1½" of travel. The oval base measures 4¼" x 5¾", providing a sturdy routing platform. The ergonomically shaped handles ensure a secure and comfortable grip when routing. Edge guide and plastic dust shield included. Rocky 30 with fixed base sold separately or as combo. NEW! Rocky 30 Plunge Base 415-6547 $39.95 NEW! COMBO Rocky 30 Router with Fixed plus Plunge Bases Includes 415-6550 and 415-6547 SAVE 15! 415-6585 List $109.90 $94.95

67

Cabinet Tools and Hardware o

SALE

Deluxe Shelf Pin Jig

e

68

Quickly install European style door hinges! n li n Position the jig on i the door and tap de the centre punch $24.99! marked “Door” SAVE $5 with a hammer. Drill the 35mm cup holes. Move the jig to the inside of your cabinet and tap center punches marked “Cabinet”. Install the mounting bracket to the cabinet and mount your door. SALE! 400-2001 $24.99 v

Cabinet Hardware Jig

Install knobs and pulls with easy, repeatable accuracy Take the guesswork out of installing cabinet knobs and pulls when updating or building new cabinets from scratch. Moveable, hardenedsteel drill edge guides lock in place and align Cabinet Hardware Jig Includes: with common hole- • (1) jig base spacing measurements • (1) edge guide for cabinet knobs and • (2) drill guides w/ knurled nuts pulls. Built-in • (2) non-slip pads measuring scales • (2) T-knobs and bolts (imperial and metric) ensure that those holes • (1) owner's manual will be positioned where you want every time. No • Versatile! Mounts single and multi-hole knobs need to measure and • Adjustable edge guide for mark every one. Requires easy positioning a 3/16" (5mm) drill bit • Strong, lightweight (not included). mater ials for easy The jig features: • Adjustable guides for handling accurate hole placement • Durable hardened-steel • Built-in measuring scales drill guides 400-1827 $24.99 for repeatable results

Cabinet Hinge Marking Jig

o

Drawer Slide Jig

Fast, easy drawer slide installation. Perfect fit and smooth sliding every time. The Drawer Slide Jig consists of two brackets that clamp in place inside the cabinet-one on each cabinet side-and align with the cabinet face frame (or with designated marks on frameless cabinets) to Drawer Slide Jig Includes: support the drawer • (2) brackets slide as you drill • (4) upper/lower sliders-installed mounting holes. • (1) owner's manual Works with almost all types of drawer slides, including ball-bearing, epoxycoated, and undermount slides. Features: • Reversible to mount • Accurate slide slides to cabinet and positioning with built-in drawer box indexing tabs • Secure for holding slides • Repeatable results in place as you work without measuring and • Strong, lightweight marking materials for easy • Versatile for use in handling cabinets, cases, and more 400-1825 $24.99

SALE

No More Rocking $89.99! or Wobbling Shelves! SAVE $37 Drill two rows of perfectly aligned shelf pin holes! Also provides perfect vertical spacing of 1¼" (32mm) between pin holes. Index either ¼" or 5mm pin holes. Also features a 50mm index from opposite side of the jig for larger or wider shelves. Works with both existing and non-assembled cabinets. Includes: • One ¼" and One 5mm self-centering drill bit • Two shelf pin star indexing pins • Two T-track guide rails • Two clear acrylic shelf pin templates with edge guides SALE! 401-1220 Reg $126.99 $89.99

Euro-Handle It Jig

Install handles and knobs fast and accurate Drill holes of different centers up to 24" apart and up to 12" from the edge. Easy to read English and metric scales are indicated. Special “V” notch allows diagonal 45° installation. Made of tough polycarbonate plastic. Features hardened steel drill bushings for use with a standard 3/16" drill bit. USA 400-2029 $49.99

35mm Hinge Installation Kit

Position the 35mm hinge A template against the back edge B of door, mark the location and drill. Kit includes template, 35mm Forstner bit (HSS) and instructions. Use with hand drill or drill press. A Kit with 35mm Bit (HSS) & Template B Optional 35mm Bit (Carbide)

400-2021 $24.99 308-3500 29.99

Track and Accessories Miter Track / T-Track

T-Track Hold Down Clamp Kits

SALE

Heavy Duty T-Track "D"

E

D

C

B

A

Anodized aluminum tracks allow you to build jigs and fixtures for your shop. Pre-drilled and countersunk for easy surface or flush mounting. Features a centered v-groove for making additional mounting holes. Use Miter Tracks (A or B) to build your own router table, or project. Sliding Bars (C) as a miter track filler strip or to attach fixtures and T-Tracks (D, E) which accept standard hex head bolts to make handy jigs and fixtures for your drill press, table saw, band saw and more! .53”

.75” A .375”

¼” Hex Head Bolt .53”

1.75” .75” .375” C

A A B B B C C

.75” .375” 1.22”

D .625”

.86”

B

3/8” Hex Head Bolt

E .375”

¼” Hex Head Bolt

.875”

.75”

Size Mix/Match 2+ ea 32” Mini / Miter Track 416-1432 $24.99 $22.49 48” Mini / Miter Track 416-1448 34.99 31.49 24” Miter Track 416-1324 12.99 11.69 32” Miter Track 416-1332 16.99 15.29 48” Miter Track 416-1348 24.99 22.49 32” T-Slider Bar for Tracks 416-1532 16.99 15.29 48” T-Slider Bar for Tracks 416-1548 24.99 22.49

SALE PACKAGE! Includes FREE bolt and knobs. D 24” Heavy Duty T-Track 415-2375 14.99 13.49 D 48” Heavy Duty T-Track 415-2377 24.99 22.49 E 24” Mini T-Track 416-1124 12.99 11.69 E 36” Mini T-Track 416-1136 16.99 15.29 E 48” Mini T-Track 416-1148 19.99 17.99 Value Kit 48” Mini-Track (416-1148) plus 2 Clamp Kits (416-0384) 416-0484 If Sep $35.97 Kit $29.99

36 Piece Jig & Fixture Hardware Kit Easily create your own jigs and fixtures! This handy kit contains: 16 assorted ¼"-20 knobs, 16 track bolts plus 4 special T-track nuts. 416-2401 $29.99

Securely hold down almost any work piece The ¼" PVC coated hold down kit comes with a ¼" standard hex head bolt and knob for use with our mini t-track. The 3/8" kit comes with a 3/8" standard hex head bolt and knob for use with our heavy duty t-tracks. ¼” PVC Coated Hold Down Kit 416-0384 $7.99 3⁄8” PVC Coated Hold Down Kit 416-0388 9.99

T-Track Bolts (Pkg. of 12) ¼ - 20 x 3” Hex Head Threaded Bolt 3⁄8 - 16 x 3” Hex Head Threaded Bolt

2+ ea. 416-0391 $2.99 $2.79 416-0393 4.99 4.59

Miter Track Sliding Fixture Block Kit

Fits any ¾" x 3/8" t-slot miter track in router tables, table saws and band saws. Use for constructing featherboards or custom jigs and fixtures. Kit includes; (1) T-slot piece 3" with 2 holes, (1) T-slot piece 2" with one hole, (2) ¼-20 bolts, (2) knobs and (1) nylon locking knob. 415-9501 $9.99

T-Track Hold Downs

Metal T-track clamps work on any t-track that accepts a ¼" or 5⁄16" hex head bolt. The T-shaped base and 1" round brass hold down secures stock from ¼" to 2" thick against the table, or use on jigs that have a T-track. Can be used to mount stop blocks onto the T-track on a drill press or router table fence face. Sold as a pair. 415-9441 List $35.99 $29.99

Flip Stop Block Set for T-track

2 Piece Set. Make accurate repetitive cuts. Brass knob adjusts location of the flip stop on fence. Flip stop up and out of the way for rough cuts. Flip the stop into place for precise finish cuts. Use with standard T-Track that accepts a 1/4" hex head bolt. 415-9313 $12.95

T-Track Intersection Kits

Each of the four aluminum pieces is 1½" long, cut at 90° and predrilled and countersunk with 2 holes. Mounting screws are included. ¼” Mini Track 3⁄8” Heavy Duty

416-1100 $17.99 416-1200 19.99

www.EagleAmerica.com / 1-800-872-2511

69

Clamps The Merle Band Clamp

Features pivoting jaws and Quick Release Corners! MLCS exclusive self-adjusting jaws will align to any angle! The flexible jaw inserts are non- marring and are easily removed. They’re made of high impact ABS plastic for long life and heavy use. The dual pivot feature allows the Merle to clamp virtually any size or shape securely! Clamps circles and ovals plus:

✥ ✥ ✥ ✥ ✥ ✥

Triangle Rectangle Pentagon Hexagon Septagon Octagon

120˚ 90˚ 72˚ 60˚ 51.5˚ 45˚

3 corners 4 corners 5 corners 6 corners 7 corners 8 corners

• The Merle clamp has almost no capacity limitation (ships with 23' of steel banding).

• Clamps as small as 25⁄8" x 25⁄8" to 69" x 69", or 23' around, but can be extended to any length by using standard ⅜" steel banding or strapping. • The Merle clamp will hold any type of frame for easy gluing, nailing, or screwing. Even jointing force at all corners. • Perfect for wide cabinet type frames (use in the center or edges), and for narrow picture frames. • The adjustable Merle clamp allows you to use as much or as little clamping pressure as needed. • Cast aluminum and steel construction makes the Merle clamp a tough tool that will work hard and long for you. • Quick Release Corner clips pull off with finger pressure. Just clip on more corners and get to work! • The Merle Clamp includes a 23' steel banding reel, four quick release corners and pivoting jaw inserts. 415-9012

$29.95

Aluminum Quick Release Corners Package of four corners and four jaw inserts 415-9013

18.95

Merle Band Clamp

Replacement Steel Reel Reel with 23 feet of steel banding

70

415-9009

9.95

Merle Clamp ShopMaster Set

Value Package! Includes 4 Clamps SHOPMASTER plus 8 extra corners with pivoting jaws. Don’t wait for glue to dry $ 22.75! when making doors, drawers or frames – clamp 4 at a time! Clamp unique shaped and multi-sided projects with up to 24 sides.

SAVE

SAVE 22.75!

415-9007 List. $157.70 $134.95

Clamps “Boomer” Pro Bar Clamp System

Mobile

An obstruction free guide fence for routing Project Center and sawing, and more. Perfect for glue-ups! Now anyplace can The lightweight aluminum extrusion is dead straight, be your workspace! flat, and strong. Boomer is a smooth quick action one An all-in-one workbench, hand operation bar clamp. Create “back-to-back” clamp sawhorse, assembly table, relationship with two clamps either vertically or side- and clamping station for by-side. Virtually eliminates side to side movement DIY, repair, and common in other clamps. The top of the clamp has woodworking projects. accessory T-tracks milled into each side and a measuring • Tables provide large • Built-in storage rule. Adjustable from 0" to total clamp capacity. 273/4" x 311/2" work trays hold Mechanism is heat treated steel. Face surface and 360° access hardware and other parts jaws are durable ABS. The color • Locking table supports • Heavy-gauge steel may vary. with easy-release tabs legs provide a solid foundation • Hole pattern on tables accept Kreg Bench Dogs • Expandable - pair with a and other accessories second side-by-side for an extra large surface. See Router Base, 90° • Included Kreg Bench Clamp with Automaxx® T-Square Head, and Saw Plate Includes: clamps vertically and Accessories at EagleAmerica.com • Mobile Project Center horizontally 24” Boomer Pro Clamp 448-9951 $29.99 • Kreg Bench Clamp Folds down for easy storage. with Automaxx® 36” Boomer Pro Clamp 448-9952 36.99 Includes $40 worth of bonus Technology 50” Boomer Pro Clamp 448-9953 42.99 accessories. The Clamp Trak • Four Kreg Bench Dogs Value Package (Includes the 24", 36" and 50" boomer clamps) and Bench Clamp provide • Two Support Brackets 3-Piece Set 448-9950 If Sep. $109.97 Set $89.99 multiple ways to hold • Two Trak Bushings workpieces. Add a 2x4 cutting • Two Connection Keys surface with included • Owner's Manual Quick-Release Toggle Clamps hardware. The open tables can Powerful one-handed clamping! support up to 350 pounds. 400-4150 $159.99 Ideal for hold-downs, jigs, fixtures or where repeat clamping is necessary. All clamps feature an adjustable rubber tip to protect your work piece “Can-Do” Clamp against damage. High Base Toggle clamps have 50% It’s a clamp and a vise! higher clearance. Join picture frames Movable Jaws B

D

C

Clamps on both sides

E Use as bench vise

G Travel Length: 1¼” A

Base Clamp A Standard B Standard B High Base C Standard C High Base D Standard E Standard E High Base F Standard G Standard H Standard

H Travel Length: 17/8”

Hold Force 750 lbs 500 lbs 500 lbs 200 lbs 200 lbs 750 lbs 500 lbs 500 lbs 200 lbs 300 lbs 800 lbs

Overall Length 11¾” 6¾” 6¾” 5½” 5¾” 5½” 4½” 4½” 2½” 7” 9¼”

High Base vs. Standard Base

Overall Save 10% Mix/Match F Height 4+ ea 2½” 449-2279 $17.99 $16.19 2” 449-2259 16.49 14.84 3” 449-2260 16.99 15.29 2” 449-2019 11.99 10.79 25⁄8” 449-2020 12.49 11.24 8¼” 449-2280 17.99 16.19 5¾” 449-2079 15.99 14.39 6¾” 449-2080 16.49 14.84 4¼” 449-2029 11.99 10.79 3” 449-6052 14.99 13.50 5” 449-6010 22.99 20.70

Two swivel points

Oblong holes for easy mounting on workbench Sturdy aluminum construction Sliding “T-handle” for high clamping pressure

Join cabinet frames

Clamp to 2¾” wide

Easy to use! Great for framing, drilling, doweling, and much more. Sets up instantly... ready to go to work for you! 2¾" frame width capacity. Clamps securely and adjusts precisely. Can-Do Clamp 415-9001 $29.95 Two Can-Do Clamps Save $7.00 415-9001-2 52.90 Four Can-Do Clamps Save $20.00 415-9001-4 99.90

www.EagleAmerica.com / 1-800-872-2511

71

Dust Collection Long Ranger III Remote Dust Collector Switch and Motor Starter

DC3 Portable Dust Collector and Air Handler

Don’t walk to turn on your dust collector while in the middle of a critical project!

B

A

You will find numerous uses for this portable dust collection/air handling unit. It uses a compact, but powerful 1½ hp motor to move air over 850CFM. Light-weight, portable, less than 50 pounds, this unit can easily move to the job or mounted for special air handling needs. Use it for wood working dust collection, discharge of air contaminated with smoke, ceramic or plaster dust and non volatile fumes. Features a 1 micron VU-THRU filter bag with zipper for dust removal. 110/220V. 415-DC31 $319.99

Flexible Dust Collection Hose

Our exclusive clear or black wire reinforced vinyl hose is strong, flexible, and durable. Its extreme flexibility allows you to easily position it exactly where you want. Reinforced with heavy duty wire .050" thick, the hose will not collapse, even under heavy suction. Just ground the wire at either end of the hose to ground your collection system.

Clear Flex Hose Clear Flex Hose Black Flex Hose Black Flex Hose

8' of 4" I.D. Hose 50' of 4" I.D. Hose 8' of 4" I.D. Hose 50' of 4" I.D. Hose

415-D08C 415-D50C 415-D08 415-D50

I-Socket Dust Collector Switch

Only one power source needed to power your tool and vac system The i-Socket’s patented design allows you to control your vacuum or dust collector through the power tools on/off switch. The onboard micro controls the inrush of current during start-up to eliminate overload and provide a 7 second delay off to clean out the inlet pipe. 15A / 120VAC rated, UL/CUL listed 489-8130 $39.99

72

$15.99 62.99 14.99 59.99

• Extra handpiece This system features: transmitters available • 110V, 220V, & 440V • Grounded with reset styles available button • Reliable and fool-proof • Uses R.F. signal, not • 5' cord on receiver affected by: outside module interference by large • Heavy-duty commercial TV’s, transformers, quality construction electrical noise, or 3-phase power sources • Convenient belt clip on transmitter • Transmitter need not be • F.C.C. approved aimed directly at receiver, • Multiple frequency codes and can go through walls. A 110V system transmitter 415-1103 $64.99 B 220V system transmitter 415-2203 74.99

Router Table Dust Collection System

Eliminates sawdust! DustRouter features: • Top and underside dust collection • Great for edge and dado cuts • Protects the router motor from burnout • Quick and easy install • Fits most routers and router tables • Works with router tables with an openstand design. DustRouter Collection System

Pocket Dust Mask

• No need to remove • Easy to change tools • Connects to workshop vacs and dust collection systems 415-7099 $39.99

The best dust mask you’ll ever use! Made of a soft, comfortable, multilayer membrane. Perfect for general purpose non-toxic applications where dust and particles are present. Adjustable nose piece and easy breathe exhale valve eliminates fogging of your glasses. Comes in a hygienic storage bag to keep it clean between uses. Box of 10. 425-5055 $19.99

Measuring and Layout Digital Sliding T-Bevel

Digi Angle Ruler & Protractor

2 tools in one - Digital sliding T-bevel & Protractor

SALE $ 34.99!

SAVE $5 Quick, Easy and Accurate! The best of two measuring tools, a set of steel rulers and a digital protractor. SAVE $20 The rulers are made from 4R stainless steel with 4 sets of increments etched into them, ranging from 1⁄8" to 1⁄64". The protractors allow you to precisely set angles in 0.05 degree increments with a strong front locking lever. The protractor has a measuring range from 0-360° and features a hold function.

SALE

8” Digi Angle Ruler and Protractor Save $20! 424-0101 $19.99 12” Digi Angle Ruler and Protractor Save $20! 424-0103 29.99

True Position Drill Guide

o

o

v

Digital Moisture Meter

e

A system for precisely drilling shelf pin, cabinet door and drawer knobs, and hardware. Slide guides and stop along aluminum english and metric rulers, tighten thumb screws, Includes: then drill. Locate any size hardware • 1 T-Square holes on doors and drawer fronts. • 1 Top Stop • Reversable for • Replaceable • 2 Sliding Guides right and left 5mm case • 1 End Stop hand doors hardened n li n steel bushings • Removable endstop for drawer • Measures 12 ½" long i d e fronts & tall doors 7 7/8" wide True Position Drill Guide 400-1860 $169.99

SALE

SAVE $10

Don’t let wet wood destroy your hard work! Test moisture before you cut! Insert metal pins into wood, turn on and instantly get an accurate moisture reading. Measures moisture content of any lumber (including fabricated woods, hardwoods and soft woods). Features a large easy-to-read digital display with “backlight” and On/Off button. Accurate from 5 to 40% with ± 1%. 9V battery included. SALE! 415-9137 $29.99

Marking Center Finder

SALE! Determine exact centers on the edges of boards up to 35⁄8" in thickness or width. Pencil included. 400-2048 $15.99

• Large digital angle readout • Holds measurement for transfer • Reverse Display button, Flip Display button, Locking Knob for manual measurement transfer • Auto Shut off feature • 8" Stainless Teel blade • 4-function control buttons • Impact resistant ABS handle • Full LCD Display • Measures & transfers angles • Range: 0-360 degrees • Resolution: 0.05 degrees

• Accuracy: 0.3 degrees • Voltage: DC 2.5V-3.2V • Power Source: One “CR2032” 3V Lithium battery (included) 424-0111 $34.99

Ligno Scanner SDM Pinless Moisture Meter

Outperforms most scanners available today Measures moisture from 5-99% , depending on the species, with a resolution readout of 0.1%. Built in correction for 80 species. Measures moisture at ¼" and ¾" depth to get a true moisture level in your wood, concrete, bamboo and sheetrock. Finished projects can be checked because it leaves no marks. Includes battery and carrying pouch with belt loop. 400-2096 $289.99

Ligno Scanner D Pinless Moisture Meter

Outperforms most scanners available today Measures wood moisture from 5-99%, depending on the species, with a resolution readout of 0.1%. It has built in correction for 71 species, which adds accuracy to your measurement. Measures moisture at ¾" depth to get a true moisture level in the wood, not just at the surface. Leaves no marks. Includes battery and carry pouch with belt loop. 400-2094 $199.99

www.EagleAmerica.com / 1-800-872-2511

73

Measuring and Layout Perfect Butt

The world’s fastest profile scriber

Before

After - Perfect

Three different sizes of interchangeable tracing wheels hold your pencil stable at its center and follows along almost any surface. Ensuring an accurate copy every time. Your pencil is also spring loaded so that it will remain in constant contact with your work piece whether it is flat or upright. 424-3414 $39.99

Precision Steel Straight Edges

Great for checking surfaces for flatness and straightness or for checking two separate parts for alignment. At 17⁄16" wide and 3⁄16" thick, they are extremely durable and straight (0.0005" per inch). The bevel “knife edge” makes it easy to use and is marked machinist’s style in standard decimal inches while the opposite edge is square and perfectly parallel. 12” Straight Edge 24” Straight Edge 32” Straight Edge Save! Buy All 3

424-2012 $24.99 424-2024 39.99 424-2032 59.99 424-2045 If Sep $124.97 Set $99.99

Center Finding Rules

Dovetail Marker

Makes cutting dovetails by hand simple The Dovetail Marker is a very handy tool that can mark dovetails up to 1" long and has two ratios: 1:5 for softwood and 1:8 for hardwood. Cutting dovetails by hand can be a daunting task. This dovetail marking gauge makes laying out the angles simple and precise. 415-9307 $10.99

Rotape Beam Compass Draw 3½" to 72" radius The 6' locking tape retracts into the body like a tape measure. Adjustable lead scribes a clean line. USA

424-3900 $32.99

4-Piece Quick Corner Package No more jar lids or paint cans! Draw accurate convex and concave arcs and 45° chamfered corners. Kit includes four transparent templates for easy surface viewing. USA 400-1120 $24.99

74

Aluminum centering rules allow you to accurately locate the exact center between any two points. USA 6” x ¾” Pocket Rule 12” x 1¾” Rule 24” x 1¾” Rule Save! Buy All 3

424-2060 $7.99 424-2120 11.99 424-2240 14.99 424-2300 If Sep $34.97 Set $29.99

Self Adhesive Rules

Features bold black markings in 1⁄16" graduations and a highquality adhesive backing that sticks to any dry, clean surface area. 2+ea ½”W x 72”L, Left to Right 424-0024 11.99 11.49 ½”W x 72”L, Right to Left 424-0026 11.99 11.49 ¾ “W x 18”L, 2pc Set Left to Right and Right to Left 424-0012 10.99 10.49 ¾ “W x 48”L, Left to Right Rule 424-0004 10.99 10.49 ¾ “ W x 48” L, Right to Left Rule 424-0005 10.99 10.49 ¾ “W x 96”L, Left to Right Rule 424-0008 16.99 16.49 ¾ “W x 96”L, Right to Left Rule 424-0009 16.99 16.49

See additional self adhesive rule sizes @ EagleAmerica.com

Flexible Curve Rulers SAVE 50% Ends 2/28/17. Plastic

flexible rulers hold their shape for precise measurements. The raised edge allows you draw a line. Increments of 1/16" on one side and 1mm on the other. 24" Flexible Ruler 36" Flexible Ruler

WINTER

SALE

424-9326 Reg. $14.99 $7.50 424-9327 Reg. 18.99 9.50

Measuring and Layout Hang-0-Matic

Kiss crooked pictures goodbye in 3 steps!

SALE

SAVE $5

o

• Strong magnetic base holds securely • Spring-loaded travel • Clear, easy-to-read LCD display • Hold function • Easy use and easy to carry • Ball tip included • 3V CR2032 battery included

3-Way / 6" Digital Fractional Caliper

No more eyestrain or guesswork Display as The hardened stainless steel 6" a Fraction caliper has a large LCD readout. Fast and accurate to 1⁄64", 0.01 mm and 0.0005". Adjustable jaws read ID and OD as well a depth. Features auto OFF and zeros at the touch of a button. Comes in a sturdy plastic storage case with battery. 424-2410 $29.99

Magnetic Digital Height Gauge Accurately set blade & bit heights The 6" digital readout is accurate to 0.001", 0.05mm or 1⁄64" and the stable magnetic base allows easy positioning. Automatically zeros itself when turned off but the zero allows the user to set 0.00 display at any position. Features an ABS-Hold function and a three position read out for a metric, decimal or fractional readings. Includes spare battery. 424-0123 $59.99

20" Aluminum Multi-Use Protractor Measure the degree of outward or inward angles, angles less than 90° and sloped angles. The brass knob allows you to lock measurements in place to easily transfer angles or bevels. 424-3405 $29.99

e

1. Use Hang-O-Matic's • Pocket size - collapseslin n built-in sliding anchors to down to 8 inches. i Only 3.4 ounces de measure the distance between two holes or • Hang ANYTHING hangers on the back of evenly, side-by-side pictures, shelves or TV's. • No laser levels or 2. Use the built in level measuring tapes needed bubble to level Hang-O- • No extra holes to fix with Matic on the wall. With a spackle and re-painting firm press on both ends, • Small enough to fit into Hang-O-Matic makes two a common drawer perfect marks on the wall. • Includes protective cover for long lasting life 3. Then, use any hardware, • Perfect tool for interior any size to hang it designers perfectly level, every time. See picture frame • Measures up to SIX feet packages on page 3 v

3-in-1 Gauge for Jointer, Router, and Table Saw. Mini depth gauge 3-in-one electronic and digital indicator features spring load and 2-way measuring. Readouts display in inches, metric, fraction, or decimal. Accurate to +/- .001"/1". Check slot depth, dovetail or a hole in your work. Make sure your measurements line up quickly, with this easy, convenient, digital tool. 424-0119 $17.99

o

Digital SnapCheck Gauge

SAVE $5 418-1010 $14.99

SALE!

Raised Panel Project SALE Calculator CD SAVE $5

SAVE $5! Produce precise detailed cut lists, without costly math errors. Create doors (up to four panels) or wainscoting panels. Get dimensions for one, or every door and wall on your project. First enter stile and rail widths, opening size and door overhang. The program quickly provides a fractional (inch) or decimal (mm) based cut list for your rails, stiles and panels. Program also includes a handy board foot calculator. On CD-ROM (for Windows XP/NT/2000/VISTA/7). 415-9102 $14.95

SALE!

Precision Layout Tools

All scales are hardened stainless steel with a glare free satin finish and come in a sturdy case. The 170° Protractor A (A) is marked in 1° increments and has a 12" adjustable arm which can be accurately set from 10° to 170°. The 6" Sliding Double Square B (B) features four scales calibrated in 1⁄8", 1⁄16", 1⁄32" and 1⁄64" increments.

A 170° Protractor with Case B 6” Sliding Square with Case

424-2412 424-2406

www.EagleAmerica.com / 1-800-872-2511

$29.99 39.99

75

Fluting and Mortising Jigs Combination Fluting Jig & Edge Guide Now makes arches and curves

WINTER

SALE

EZ Pro Mortise & Tenon Jig Make professional and affordable furniture joints in minutes!

Mirrors

Windows

Casework

SAVE $22! Ends 2/28/17.

v

o

o

e

Winter Sale Package Route straight and accurate flutes and • Combination Fluting Jig and Edge Guide dados on any curved, • FREE Round Nose router bit arched or straight board, 130-0802 (P. 23). quickly and easily. Simply remove your routers existing base plate and mount your router to the Fluting Jig base. Attach the two guide nlin wings with ball bearings and the provided i d e hardware and you are ready to cut perfect flutes at any length. The easy to adjust guide wings and centering line allow you to quickly index the centers of multiple flutes or dados for fast repetitive cuts. Cut curved or arched stock from 1" to 5½" wide or simply rotate the guide wings on each end to cut straight stock from 1" to 12" wide. You can also remove one of the guide wings to create the perfect edge guide. This jig works great with plunge bits to create decorative moldings. Made from durable, clear and impact resistant ⅜" thick polycarbonate. WINTER SALE! 400-1297B List $81.94 $59.99

3-Piece Cabinet Scraper Set

Easily removes dried glue or debris Includes: straight (2½” x 5”), concave / convex (2” x 57/8”), and gooseneck (23/4” x 4½”). Choose the shape depending on the curve of your wood. Made from tempered, high-carbon alloy English steel.

High-speed tool steel burnisher is 6” long with rosewood handle. Just a few strokes on your scraper and it’s ready to go. 3 Piece Cabinet Scraper Set Burnisher

76

400-2060 $19.99 400-2072 24.99

A quick and easy allin-one solution to cut matching mortise and tenons with a single inexpensive jig. Compact aluminum jig comes assembled and ready to use right out of the box to produce the widely used ¼" mortise and tenon joint. Using a plunge router you can cut both mortises and tenons ranging from ¼" to ½" thick and from 1" to 3" wide. The unit can easily handle stock ranging from ½" to 1½" thick and can cut multiple mortises in a single long piece. The integrated clamps and swing arms, align and secure wood for accurate joints. Includes bushing guides for ¼", 3⁄8", ½" thick tenons, two-part base plate with bushing adapter, centering tool, adjustment wrench, steel spiral bit and instruction manual. 400-1301 $149.99

2 Piece Bench Dog Set

Solid aluminum bench dogs secure your workpiece in place. Designed to fit in a standard 3/4" pre-drilled workbench hole (or drilled anywhere you need it). These bench dogs also have a heavy duty side mounted spring to eliminate movement once inserted into the hole. 415-9314 $10.99

8" Bench Holdfast

WINTER

SALE

Great for frequent rotation and clamping SAVE 25%! Ends on 2/28/17. From small boards to huge blocks, these bench holdfasts make frequent clamping a snap. Simply drill a ¾" hole to accommodate the holdfast and drop it in place. Give the head a firm tap with a mallet and you're ready to go. To disengage the clamp, tap the backside. The 8" clamp has a 4" reach and instruction manual. 8" Bench Holdfast 453-0108 $14.99 2 Piece Bench Holdfast Set 453-2108 if Sep. $29.98 $22.50

Table Essentials Spline Jig “Pro”

Handyman Nail Finder

The best metal detector we have seen!

Improved! Now with replaceable inserts.

Save valuable saw, planer, and jointer blades by locating metal objects in the wood before you cut. Detects small metal objects up to 6" deep. Has a large 5" long x 2½" wide detection path. The LED indicator light works with either a high pitched audio alert or a vibration alert. Requires a 9 volt battery, not included. USA 424-0170 $99.99

Metal Detector

Save $20! Add strength and beauty to your joints. The Spline Jig Pro was designed for table saws to save time and to safely create strong, decorative joints. When making fine furniture, picture frames and boxes, spline joints are one of the most beautiful methods of joiner y used in woodworking. You can use contrasting wood tones or various spline thicknesses to create decorative accents. Spline joints are not only attractive but feature extra gluing surfaces when compared to a plain joint, making them one of the strongest joints you can make.

Detects objects up to 1½" deep. The metal detector flashes a red light and gives an audible warning if it moves over any metal object. Requires 9V battery, not included. 400-2034 $19.99

Router Circle Jig

Mounts into the router t-track on the router table.

SALE

SAVE $10

The jig measures 12" W x 24" L and features an embedded t-track with two stop blocks. Use both stop blocks to $99.99! sandwich and cut splines in narrow SAVE $20 projects, one stop block to clamp and index cuts on medium sized projects or remove both stop blocks for larger projects such as boxes. The base of the jig is made from durable ½" laminated MDF which creates a smooth, non-marring surface that slides easily across your table saw top. The adjustable 18" miter bar will fit in any standard ¾" miter slot.

SALE

SAVE $10! Mounts into the miter t-track on your router table. The phenolic base supports your work piece as it pivots on the center pin. You can make circles as small as 2½" and up to 32" on the MLCS “Router Table Top”. On other router tables, the overall circle diameter will depend on the distance from the router bit to the end of your miter t-track. Includes a handy measuring accessory, designed to work with a ½" diameter or smaller straight bit, to give an easy, exact circle radius. SALE!

415-9333 $29.99

We recommend our Thin Rip Jig (P. 56) which safely and accurately cuts thin splines on the left-hand side of the blade, with no burning, binding or kickback. SALE! Spline Jig Pro 400-1037 Reg $119.99 $99.99 Replaceable Inserts - 3 Pieces 400-1036 12.95



COMBO BOTH Spline Jig Pro and Thin Rip Jigs 400-1030 SAVE 30! Reg $149.98 $119.99

www.EagleAmerica.com / 1-800-872-2511

77

Sharpening and Finishing Precision Sharpening System

Preserve Non-Toxic Wood Oil

Get razor sharp results Pick the stone you need and insert the slide with the proper angle toward the tool rest. Set the tool to be sharpened on the tool rest, take a few strokes and you’re done and ready to work. Includes: 120, 180, 400, 600 and 1200 Grit Stones. 440-0610 Regular $151.96 Sale $119.99

Uses a food safe blend of natural oil ingredients from exotic nuts. Restores and protects wooden cutting boards, salad bowls, utensils, knife handles and even children's toys. Penetrates deeply, seals out the moisture and food odors. Wipe on, wipe off. Dries to a light golden brown. 8 oz. bottle. 2+ ea Preserve Non-Toxic Wood Oil 8 oz. 443-1000 $14.29 $13.79

Deulen Jointer / Planer Knife Sharpeners

Finishing a job correctly makes your craftsmanship truly shine. This tung oil is non-toxic and produces a tough hard surface which is absolutely waterproof, and abrasion resistant. Penetrates wood fibers enhancing both grain and color. 32 oz bottle. USA 2+ ea Preserve Tung Oil 32 oz. 443-1200 $21.99 $20.99

o

o

v

Jointer/Knife Setting Jig

e

Get sharp blades in just minutes n li n Simply remove the ide cutting knives from your tool and insert them into the hand held jig. Make a few passes across different grits of sand paper (80, 120, 150, 180, 220, 400) on a flat surface and you are done. Made of Solid Exotic Hardwood, Brass, and Stainless Steel. USA 6” Deulen Jointer / Planer Knife Sharpener 440-0806 $54.99 12” Deulen Jointer / Planer Knife Sharpener 440-0812 89.99 Assorted Pack of Sandpaper (6 Pack) 440-0813 8.99

SALE

SAVE $7!

Save $7! Precisely set

your jointer knives to within 0.001" accuracy. The solid polycarbonate body uses strong magnets to both secure the jig to your outfeed table and hold the blades in place while you tighten them in the cutter head. Works with jointer knives, up to 8" wide. 415-9395 List $31.99 $24.99

Pocket Diamond Honing Stones

Sharpen bits, saw blades, knives and more Use them without water or messy oils. Ideal for shaping or touching up glass, fiberglass, stone or wood contours. Hones are 57⁄8" long. Diamond surfaces are ¾" x 2". USA Extra Fine 1200 Grit Fine 600 Grit Medium 400 Grit Coarse 250 Grit Save! Set of 4 (1 of each grit)

Planer / Knife Setting Jig

EZ Cut Tool

n li n

v

o

o

e

Easily cut glass, tile, plastic, i de laminates and more! Cut straight lines or radii in glass, tile, plastic sheets, laminate and even thin sheet metal! Watch the online video to see this amazing tool in action! The EZ Cut tool has a carbide cutting wheel. The patented, selfadjusting separating bar cleanly breaks material when you gently squeeze the handles together. Simple and fun to use. Instructions included. 400-0060 $34.99

78

Preserve Tung Oil

440-0000 $6.99 440-0100 7.99 440-0200 8.99 440-0300 9.99 440-0501 $29.99

Micro adjustable to 0.001". For both carbide and steel knives, this two piece jig allows you to set-up jointer or planer knives quickly and accurately. The setting jig holds the knife firmly in position, freeing both hands for adjustment and tightening of the knife. This provides added safety and keeps fingers safe from razor sharp cutter knives. 415-9397 $69.99

Sanding Oscillating Spindle Sander & Belt Sander Set-up as belt sander

Accessories available: 80 - grit sanding sleeves - 5 pieces 415-7640 $9.99 150 - grit sanding sleeves - 5 pieces 415-7642 $9.99 240 - grit sanding sleeves - 5 pieces 415-7644 $9.99 4” x 24” 40-grit sanding belt - 10 pieces 570-0030 $22.99

Sanding Detailer 24-Piece Kit

Contour Sanding Grips

Eight pieces These durable, flexible rubber grips allow you to easily sand contours, curves and profiles on moldings, etc. The handles of the grips have micro profiles to get into tight areas of flat, radius, knife edge and wedge profiles. Includes: three 51/2" x 23/4" sanding pads (1/8", 1/4" and 3/8" thick); five profile grips (1/8", 5/16", 7/16", 9/16" and 1"). 415-9589 8 Pieces $14.95

Soft Sanders

Replacement Belt 5-Piece Packs 570-0002 80 grit 5 pc. $5.19 570-0003 120 grit 5 pc. 5.19 570-0004 180 grit 5 pc. 5.19 570-0005 240 grit 5 pc. 5.19 570-0006 320 grit 5 pc. 5.19 570-0007 400 grit 5 pc. 5.19 570-0008 600 grit 5 pc. 5.19

24-Piece Fine Kit Includes 4 Detail Sanders: Fine, Very Fine, X-Fine, and XX-Fine, 5 Replacement Belts each (a total of 20 replacement belts) of 240, 320, 400 & 600 Grit. 570-0001 $26.50

n li n

ide

v

Easily sand difficult contours

e

Multi-function sanding tool with replaceable belts. 6" long and ¼" wide detailers will sand the finest details in your project with three working areas: a tapered end, a round end, and 3½" flat side, and are color coded for easy identification. Continuous sanding belts can be moved as an area wears out. They’re easily replaced, with enclosed spring for tension. 24-Piece Coarse Kit Includes four Detail Sanders: Fine, Medium, Coarse, and X-Coarse, five Replacement Belts each (a total of 20 replacement belts) of 80, 120, 180 and 240 Grit. 570-0000 $26.50

4” x 24” 50-grit sanding belt - 10 pieces 570-0031 $22.99 4” x 24” 60-grit sanding belt - 10 pieces 570-0032 $22.99 4” x 24” 80-grit sanding belt - 10 pieces 570-0033 $22.99 4” x 24” 100-grit sanding belt - 10 pieces 570-0034 $22.99 4” x 24” 120-grit sanding belt - 10 pieces 570-0035 $22.99 4” x 24” 150-grit sanding belt - 10 pieces 570-0036 $22.99

o

Specifications: • Sanding belt size: 4" x 24" • 5 pieces rubber sanding sleeves (4½" long): ½", ¾", 1", 1½", 2" • 5pcs Sanding Drums: ½", ¾", 1", 1½", 2" • Table tilt: 0-45 degrees • Includes 5pcs 80-grit sanding sleeves and sanding belt • Sanding belt speed: 1575 FPM • Spindle oscillation: 5⁄8", 58 oscillations per minute • Motor: 1/2 HP, 110V, 3.5A, 2000 RPM

Set-up as spindle sander

o

Two sanders in one! Dual purpose benchtop oscillating spindle and belt sander easily converts from a 4" x 24" edge belt sander to a spindle/drum sander for most sanding applications. Features include a tilting table and on-board storage for drums, table inserts and edge sander belts. 415-7646 $199.99

Tapered edges of the blocks allow you to sand those hard to access places, while the smooth contours and soft edges eliminate gouging. Kit contains six blocks of different shapes and 1 sheet each of 80, 120, and 180 grit SuperFlex sandpaper. For replacement paper see web. 571-0500 $25.99

www.EagleAmerica.com / 1-800-872-2511

79

Handy Helpers

Point 2 Point

Layout and centering tool Mark multiple points quickly, accurately, and easily with this handy shop tool. Made of stainless steel, extends up to 2 feet.

Safe, convenient, clean and comfortable!

SALE

SAVE $5 424-3410 $24.99

These high quality hook rulers are made from rigid tempered stainless steel are precision etched for long life and easy readability. Calibrations are on both sides with 1/8" and 1/16" increments on one side and 1/32" and 1/64" on the other side. 6” x 3/4” Stainless Hook Rule 424-3306 $7.99 12” x 1” Stainless Hook Rule 424-3312 14.99

48" Extruded Aluminum Shelf Stiffeners

4+ea. 400-1616 $11.99 $11.49 400-1617 12.99 12.49 400-1618 12.99 12.49

Router Bit Storage Cases

Features a double wall lid with protective foam lining. Made of high density polyethylene with secure snap lock latch and carrying handle. Slotted die cut foam insert is compatible with router bits ½" shank or smaller. USA.

edium Router Bit Storage Case, maximum of 30 bits M 10” L x 7½” W x 3¾” D 499-5731 $39.99 Large Router Bit Storage Case, maximum of 70 bits 13½” L x 103/8” W x 5” D 499-5770 59.99

80

o

Eagle America No-Tie Aprons

Stainless Hook Rules

Designed for ¾" material. Improves load rating of plywood, particleboard, MDF and wood. Color Aluminum Black White

v

SALE

Ideal for developing, sign making and more The clear 7" diameter, scratch resistant base n li n plate fits almost any ide router, including 3 hp models, and comes with a self centering pin to center the plate on your router. Durable metal nose construction for longer bushing life. Includes 8 popular size extended nose bushings (5/16", 3/8", 7/16", ½", 5/8", 51/64") and adaptor for using 13/16" standard metal bushings. 400-2349 $29.99 e

SAVE $5! Ends 2/28/17 These all steel, precision squares are accurate to within 0.001" and WINTER come in 2", 4" and 6" lengths. All surfaces and edges are ground for straightness and parallelism so the squares are accurate on both inside and outside edges. There are no graduations on the blades. Comes in a wood storage case. 424-2420 List $44.99 $39.99

Base Plate with Metal Bushing Set

o

3-Piece Engineer Square Set

SAVE $5! Safer than traditional

aprons, No-Tie aprons don’t have loose-hanging ties to get caught Logo on apron! in machinery. These aprons have adjustable hook-and–loop closures at the neck and waist band which eliminate cumbersome ties, allowing quick and effortless removal. The waist band closure also features an elastic band for added comfort and range of motion, unlike tie aprons that can restrict movement. The full length aprons are made from a durable, machine washable, twill material that prevents woodchips from sticking to them. One size fits all. USA Large (38” Long) SALE! 719-0104 $25.00 X-Large (44” Long) SALE! 719-0106 25.00

Router Bit Organizer

499-5004

Store up to 110 bits! SAVE $2! These foam trays help keep your bits clean, sharp and accessible. Trays stand alone or can be trimmed SAVE $2 to fit in storage cabinets or drawers. The Low-Density foam tray has a die cut slot that will accommodate bits of any shank size. 499-5003 ¼” Holes ½” Holes High Density Foam 60 50 10½” x 12¾” x 1½” SALE! 499-5004 $12.99

SALE

Low Density Foam Holds up to 30 bits 91/8” x 65/ 8” x 13/8” 499-5002 $9.99 Holds up to 70 bits 13” x 9½” x 1½” 499-5003 12.99

Eagle America® Order Form Order 24 hours a day! Toll Free: 1-800-872-2511 • Fax: 1-800-872-9471 1 Bill To:

Woodworkers Showroom & Outlet

Name ✁ Cut Along Dotted Line

Company

Customer#

Address Apt. / Suite City

State

Zip

2 Daytime Phone No. (Required)

215-938-5067

• Router Bits & Tables • Lathes • Pen Making • Wood Turning • Chisels • Dust Collection • Jigs • Scratch and Dent

E-Mail Address

Bring this ad in and get...

3 Ship To Note: UPS requires street address

Print Name Company

10

Address Apt. / Suite City

State

Zip

4 Method of Payment

Exp. Date / (Required) ( Month) / (Year)

Security Code AmEx uses 4 digits MC, VISA, DISC uses 3 digits (Required)

Signature of Card Holder: 5 My Order

✁ Cut Along Dotted Line

OFF

your entire purchase!

Card #

In store only, maximum $50 0ff 1 per customer. Ends 2/28/17

2381 Philmont Ave. #105 Huntingdon Valley, PA 19006

Item# Page# Description Qty Price Each Price Total Merchandise Total 6 Shipping and Handling Charges Rates valid for Subtract (Gift Card / Promo) Ground Service Air Express Service (up to 10 lbs.) Air Express Service contiguous 48 states, APOs and FPOs only. Super Saver Fast Track Order by 1 pm ET to ship same day Merchandise Subtotal Shipping Method US Postal UPS 3-Day Air 2-Day Air Next Day Air Shipping & Handling & Delivery Time up to 9 Days up to 6 Days 3 Days 2 Days 1 Day Order Subtotal Up to $25.00 $6.99 $9.99 Charges will be $25.01-50.00 8.99 11.99 No Sales Tax calculated at checkout. $50.01-75.00 9.99 12.99 Except PA Residents, 6% $75.01-100.00 11.99 14.99 For mail orders, a Grand Total $100.01-125.00 13.99 16.99 customer service rep $125.01-150.00 $150.01-200.00 $200.01+

✁ Cut Along Dotted Line

%

14.99 15.99 17.99

17.99 18.99 20.99

will contact you with the charges.

Shipping: Out of Stock Items: International CustomerService: Service: Out of Stock Items: Shipping: Express Shipping: International Customer: Customer Orders for AK, HI, PR, VI, for AK, We repredon’t like back WeHI,also express shipping Customer: OurFriendly FriendlyCustomer Customer Service Weorder don’t items like back order items Orders PR,offer VI, APO, See web for details. Our APOs, FPOs and willwilloptions. any more then you Wethen carryyou do. Ordersatwith express See web for details. sentatives are available to answer any do. more We carry a Canada and FPO be calculated Service Representatives California Prop 65 shipped Postalout. Ifshipping a large inventorylarge so we can avoid options; 3 day, 2nd day California Prop 65 youravailable questions between 8:30 am and inventory so webecan avoid via U.S.check additional shipping are to answer Warning: ServiceIf unless wise are or possible. If as possible. next day by Warning: 5:00questions pm ET Monday-Friday. as much there other charges needed, wedelivery will received your between them as much asthem Some products in this catalog If additional there is a back ordered item on itemrequested. 3:00pm ET will ship the same day. Some products in this is a back ordered on your contact you. 8:30am and 5:00pm ET Returns: may contain one or more chemishipping charges are your order we will shipwethat item Oversized or packages over 10 lbs catalog may contain order will ship that item to Monday-Friday Returns are easy! We are not satisfied Express Shipping: cals, including lead, that are needed we will contact to you with oneyou of our ground may need additional shipping with one of our ground or more chemicals, unless you are. Simply complete the We also offer express shipping known to one the State of California Returns: you. APOs and FPOs must charges. If this is the case we will service shippingservice methods as soonmethods shipping as soon including formmake on the back simple! of your invoice and options. Orders with express to cause cancer andlead, birththat defects We returns ship U.S. Postal Service. as we have it available. contact you BEFORE the package are known to the State as we have it available. return to us. Note: Returns of shipping options: 3 day, 2nd day or other reproductive harm. We are the notitems satisfied Review the shipping and ships. In stock only items will Order Processing: of California to cause non-defective will incur a Order Processing: or next day delivery received by unless you are. merchandise Simply handling chart on this page ship with your express shipping orders areMost processed cancer and birth defects restockingthe feeform of 10% purchase ordersand are processed and 1:00 pm Eastern Time will ship complete on of thetheMost for estimated delivery time option. No PO boxes for express shipped in 1-2 business from or other reproductive priceofofyour the returned items (minimum shippeddays in 1-2 business days from the same day. back invoice and and cost. shipping options. the time we receive the order. harm. restocking fee is $2.00). the time we receive the order. return the items to us.

E132

www.EagleAmerica.com / 1-800-872-2511

81

Wood Shaping Denker Carving Tools

The challenge of hollowing bowls is to profile the inside the bowl through a small opening in the top. Experts developed this set with features and capabilities comparable to hollowing systems costing twice as much. • Curved hollowing blade is flat, for superior tool support while cutting inside bowl • HSS blade is heavy duty 5/16" thick, 6½" long for efficient turning with little vibration. • Complete system includes blade with handle, 6 ea. HSS interchangeable cutters, hardened set screw with an Allen wrench. • 6 cutters handle multiple interior profiling requirements including: Inside walls, inside bottom, neck, inside top and more. • Includes 2 sizes of round profiles and 4 special purpose profiles, plus instructions. Complete System 415-9803 $49.99 Replacement Tips (set of 6) 415-9804 29.99

4 Piece Bowl Turning Set

Perfect chisels and gouges for you to start turning bowls in an attractive wooden carrying case.Includes: • 1" Round Nose Scraper – 16¼" long with 6½" blade • ¾" Round Nose Side Cutting Scraper – 18¼" long with a 61⁄8" blade • 5⁄8" Bowl Gouge – 22½" long with 87⁄8" blade • ½" Bowl Gouge – 22½" long with 87⁄8" blade 415-LCBT $69.99

82

o

e

“Ultimate” HSS Hollowing Tool System

Safe, affordable and efficient woodcarving tools Revolutionary carving tools rapidly remove n li n large amounts of wood ide material. Great for hollowing logs to create custom bowls, trays and carvings. The hard steel tubular cutters slice away as much or

v

Satisfies the majority of your turning needs and is suitable for turners of all skill levels. An ideal kit for turning pens or much larger projects on lathes of any size. The M2 High Speed Steel outlasts high carbon 6:1 and will give you years of use. Includes eight essential chisels with beautifully turned hardwood handles packaged in an attractive wood display box. Approx. 16" long with 5¼" blades. The 8 pc. HSS lathe set includes (left to right): • ⅝" Round Nose Scraper • 3⁄16" Parting Tool • ½" Bowl Gouge • ⅝" Spear Scraper • ¾" Spindle Gouge • 1" Skew Chisel • ⅞" Roughing Gouge • ⅝" Skew Chisel 415-LCHS $79.99

o

8 Piece HSS Lathe Chisel Set

as little material as the circular cutting edge can touch, cutting through the toughest hardwood, knots, and end grain. USA

C

B

A

Hand Carving Shave (A) The shielded edge is exposed only enough to cut the material. Trim and fit joints, flair, chamfer or round-over edges, hollow chair seats, and even flatten rough, warped lumber.

Rotary Planing & Carving Head (B) ¼" shank fits any variable speed router, rotary tool, flex shaft, or spiral cutter with speed control. The face rides the surface of the work piece to guide and limit the cut. Cuts just one clean chip per revolution at 10-15,000 RPM. HD Rotary Carver (C) Improved Model! Fits 5⁄8" angle-head grinder. Safer than dangerous discs with chainsaw teeth. Will not load-up like other cutters. Makes 200 clean chips per second with no dust.

All tubular hardened steel cutters can be rotated to use their entire circular edge before sharpening. Sharpening can be done in seconds with the furnished arbor using any bench grinder or abrasive wheel.

A Hand Carving Shave B Rotary Planing & Carving Head C HD Rotary Carver, 5⁄8” arbor- Improved!

468-3350 $69.99 468-3352 69.99 468-3354 69.99

3-Step Lathe Polishing System

(Note: pre-treating with Danish Oil strongly recommended for best results.) Get a beautiful and a durable wax finish. Buffing passes are made with a Tripoli buff (linen wheel), White Diamond buff (linen/ flannel wheel), then Carnuba wax (flannel wheel). System requires a lathe with a minimum ½ hp motor. Includes: • Three 8" fabric buffing wheels • Tripoli ,White Diamond, Carnuba wax bars • #2 MT heavy duty lathe mandrel which holds the buffing wheels. 3-Step Lathe Polishing System Pint of Deft Danish Oil

415-9807 $54.99 415-9808 10.99

Lathe Chucks Barracuda 2

WINTER

SALE

Professional Quality SAVE $25 Ends 2/28/17 Powerfully grip your work with the Barracuda Pro lathe chuck. The “T”-handle key enables you to use a single hand to tighten the jaws securely, while your other hand is free to support your work. Smooth, easy to use, and a great value for such a highly engineered product. Complete system includes 4 sets of jaws and chuck body is pre-threaded 1" x 8tpi. Also includes a ¾" x 16tpi headstock adapter. Suitable for mini, midi or full sized lathes. Weighs 4 lbs, 3.5" diameter. Regular $189.99 415-3000C $164.99 Includes Screw Chuck, #3 Round Jaws, #1 Step Jaws, Pin Jaws, Jaw Tightening Key and a Carrying Case.

Utility Grip V2

Chrome plated! A great value. Designed for midi and full size lathes, this strong, smooth chuck will take on just about any turning project. Holds bowl blanks from the inside or outside. Jumbo Flat Jaws turn bowls up to 8¼" diameter. Lever operated, pre-threaded 1" x 8tpi, and weighs 5 lbs., with a 3.25" diameter.  415-3418 $89.99 Includes #1 Step Jaws, #2 Jaws, ¾" x 16tpi adapter, jumbo flat jaws, Allen wrench and set of tightening screws.

Barracuda 2 T/N

Professional Quality with Durable TN Coating Combines the hardness, low friction, and superior durability of Titanium Nitride plating with the features of the Barracuda 2. Chuck and jaws are “C” series compatible for interchangeability between other PSI chuck bodies and jaws. Includes small flat jaws for finishing bowls (up to 5" dia)., a Super Spur Insert that simplifies converting over to spindle projects, an indexing back plate, accessories and case. Standard Thread (1" x 8tpi), includes ¾" x 16tpi adapter. The chuck weighs 4 lbs. and has a 3.5" diameter. 415-3000TN $219.99 Includes 5 sets of jaws, Screw Chuck Adapter, Spur Center, Carrying Case and more!

Barracuda

A powerful self-centering PSI lathe chuck, featuring rich chrome-plating, smooth action and powerful grip. The lever operated chuck comes with a wide variety of accessories (including 4 sets of jaws), and will mount any project onto your lathe. Ideal for bowls, spindles, small projects, and much more. Fits all "C" series accessories, a 3.5" diameter, 1" x 8tpi, weighs just 3.5 lbs. and comes with it own case. Barracuda 415-2000C $139.99 Includes: #1 Jaws, #2 Jaws, #3 Jaws, 1" Pin Jaws, Screw Chuck Adapter, ¾" x 16tpi Adapter and Carrying Case.

Barracuda 4

The maximum Barracuda! This self-centering heavy duty chuck for full-size lathes makes easy work of your heaviest and largest turnings. The geared key mechanism provides a powerful grip capable of holding large diameter work. Designed for lathes with 10" swings or larger. Includes woodworm screw chuck. Weighs 8 lbs. with a 4.5" diameter. Wooden carrying case included. Body threads 1½" x 8tpi. For spindle adapters see EagleAmerica.com Barracuda 4 415-BARR $229.99 Purchase includes #3 Wide Jaws, Pin Jaws, #1 Step Jaws and 2 Wrenches.

Spindle Adapters Adapter to 1” x 8tpi 415-BA418 $14.99 Adapter to 1¼” x 8tpi 415-BA4114 14.99

Spindle Adapters Fits 1¼” x 8tpi headstock and 1" x 8tpi chuck 415-11418 $19.99

Collet Chucking System with 5 Collets

Delivers precision gripping and centering for small diameter dowels and tenons. Ideal for securing pen mandrels, bottle stoppers and other small projects where a tenon is used for chucking. Easily hand tightens to secure collet and workpiece. Pre-threaded for an 1" x 8tpi headstock spindle. Includes: ¾" x 16tpi spindle adapter, with collet closing head, 5 collets (¼", ⅜", ½", ⅝" and ¾") and a carrying case. 415-LCDO $89.99

www.EagleAmerica.com / 1-800-872-2511

83

Router Tables and Spline Jig Router Table Spline Jig

e

ide

o

SALE

n li n

v

WINTER

o

Designed for router tables with a miter slot.

Complete Package! Includes the Horizontal Table, two accessory Table Tops and the Premium Upgrade Kit!

NEW! Improved aluminum router lifting support!

INCLUDES:

• Horizontal Router Table (415-9767) • Tilting Table Top (415-9764) • Mortising Table Top (415-9766) • Premium Upgrade Kit (415-9763) Complete Package

Premium Upgrade Kit for “Horizontal” Router Table!

SAVE $28! Ends 2/28/17

Safely create strong and decorative spline joints on picture frames, jewelry boxes, and Winter Sale Package humidors. The spline • Router Table Spline Jig joint is one of the best • FREE solid carbide spiral bit ways to reinforce a 106-0202 (P. 14). miter joint due to the increased glue surface area. Splines can also add a high-end look to your project when made from a contrasting tone wood species. The jig is ½" thick, melamine coated MDF and has a 14½" long aluminum miter bar that fits any standard ¾" wide miter slot. The aluminum miter bar position is adjustable, using the mounting slots in the base and works with tables that have the center of the miter slot 5½" to 8¼" from the center of the bit opening in the router tabletop. The base is 15½" wide and 10" deep. Two adjustable support fences sandwich or clamp your project, when cutting splines across the corners. Vertical handles allow you to safely hold the jig on the router table, and keeps hands well away from the sharp cutting blades of the router bit. Use straight and/or dovetail router bits to cut the spline joints (router bits not included). Router Table Spline Jig List $107.90 415-9347 $79.95

84

SAVE $110!

415-9771 List $379.92 $269.99

Horizontal Table sold separately on page 85.

Improve the MLCS Horizontal Table with a new Handle, Dust Port Adaptor, and Storage Drawer. 1) The new Cast Aluminum Extension Handle makes height adjustments easier. By adding this extra strong and extra long handle, the force required to make precision adjustments is much less then the original stock handwheel. 2) Dust Collection! The upgrade kit includes everything you need to enclose the base of your horizontal table and make it dust collection ready. A 2-1/2" dust collection adaptor mounts to the side of the table. A back panel encloses the collection area and still allows for all height adjustments to be made. 3) A Large Storage Drawer has been added to the front of the table, with enough room to hold a large selection of router bits and router accessories. Keep everything you need in the table. Add the Premium Upgrade Kit to any MLCS Horizontal Table by just drilling a few holes, and replacing a few parts. Installation is fast and easy. Premium Upgrade Kit for Horizontal Table 415-9763 $49.95

Router Tables The “Flatbed” Horizontal Router Table

See Router Tables on pages 42 and 43.

Don't stand stock on edge! Rout wide stock flat on the table with tall router bits in the horizontal position

NEW! Improved extruded aluminum router lifting support structure! The multiple routing operation Horizontal $179.99! Benchtop Table makes tall auxiliary fences, SAVE $10 multiple featherboards or jigs unnecessary.

SALE

• Quickly and easily make mortise & tenon joinery, raised panels with vertical raised panel bits, moldings and picture frames • The benchtop Horizontal Router Table features micro adjustable bit height adjustments. Increments of 1/16" per turn (¼ turn = 1⁄64", ½ turn = 1/32", ¾ turn = 3/64") provides extremely precise adjustments. • The horizontal table measures 24" wide by 20" deep by 25" high. It has a sturdy ¾" thick MDF core, durable melamine surface and polyethylene plastic edges. • ¾" thick MDF core with melamine surface extension fences, on both sides of the router plate, give maximum support to long stock. • The ⅜" thick, 11¾" x 11½" sliding router plate is held in routing position by sturdy aluminum extrusions, along with two locking knobs which safely secure the plate in position. • Use with 3 hp routers or less. Raise or lower your router up to 2⅛" below or 2⅜" above the table. • The Miter T-track is designed to accept new accessory table tops.

See router table tool stands on P. 43 & 47.

Raised panel door instructions included! SALE! Horizontal Table

List $189.99 415-9767 $179.99

NOTE: For demonstration only. The router bit should always be beneath the wood. See Architectural Molding bits on page 25, Solid Carbide Spiral bits on page 14, and Vertical Raised Panel bits on page 8.

SAVE! Horizontal Table and “Tilting” Table Top Combo

SAVE! Horizontal Table and “Mortising” Table Top Combo

Allows the ultimate flexibility in routing! The accessory tilting table top tilts up to 45˚, allowing you to create offset angles that can’t be cut on a conventional 90˚ table surface. Create custom chamfers using a straight bit. Cut spline joints on multi-sided objects. Produce tapered moldings using crown molding or chair rail bits. The table top includes a miter t-track that fits a standard ⅜" x ¾" $40! miter bar or safety bar.

A safer, easier, and accurate way to cut mortise and tenon joinery! The mortising top slides “X-Y” on aluminum t-tracks to ensure straight, accurate cuts. The thick accessory table features two t-tracks and includes a 90˚ stop block, a 45˚ stop block, and four hold down clamps.

SAVE

SAVE $40!

COMBO Horizontal Router Table & “Tilting” Table Top 415-1243 SAVE 40! List $249.98 $209.99

COMBO Horizontal Router Table & “Mortising” Table Top 415-1244 SAVE 40! List $269.98 $229.99





Tilting Table Accessory Top 415-9764 List $74.99 $59.99

Mortising Table Accessory Top 415-9766 List $99.99 $79.99

www.EagleAmerica.com / 1-800-872-2511

85

Bowl and Tray Templates Bowl and Tray Templates SAVE $47 with Starter Kit!

A

Ends 2/28/17. Make beautiful WINTER bowls and trays with your router. Durable clear acrylic templates will not ✓ warp or distort. Glue up your left over scraps of various B woods to create beautiful patterns and colors. Instructions include specific examples on how to build and modify your ✓ bowl and tray designs. Collet extension (415-0660) is required and the optional large mounting plate (415-0503) is used to support your router over the large recessed openings. We recommend using food-safe Preserve Wood Oil H (443-1000) to finish your projects. Use our Porcelain Ramekins to serve dips, appetizers and other treats with your Save 10% homemade bowls and trays.  Use Mix/Match Templates Tray Size Bit 3+ ea A 4-Section Tray 17¼” Round ▲ 401-8301 $26.99 $24.30 B Oval Tray 13” x 20” ▲ 401-8302 24.99 22.50 C 4-Bowl 10” x 10” ▲ 401-8308 24.99 22.50 D Square Tray 10¼” x 10¼” ▲ 401-8309 24.99 22.50 E Flat Tray 9¾” x 12¼” ▲ 415-0201 27.99 25.20 F Club 12” x 12” ❃ 401-8346 24.99 22.50 G Diamond 12” x 12” ❃ 401-8347 24.99 22.50 H Spade 12” x 12” ❃ 401-8345 24.99 22.50 I Single Heart 12” x 10½” ▲ 401-8306 24.99 22.50 J Double Heart 15½” x 10” ❃ 401-8307 27.99 25.20 K Oak Leaf 9” x 14” ❃ 401-8350 24.99 22.50 L Clover Leaf 12” x 12” ❃ 401-8349 24.99 22.50 M Maple Leaf 12” x 12” ❃ 401-8351 24.99 22.50 N Christmas Tree 14¾” x 11½” ▲ 401-8303 27.99 25.20 O Snow Man 16½” x 8¾” ▲ 401-8304 27.99 25.20 P Bells 16” x 12” ❃ 401-8340 26.99 24.30 Q Angel 15” x 13” ▲ 401-8334 26.99 24.30 R Santa Hat 12” x 13” ▲ 401-8336 26.99 24.30 S Ginger Bread Man 11” x 13” ▲ 401-8338 26.99 24.30 T Candy Cane 9” x 14” ▲ 401-8342 26.99 24.30 U Stocking 13” x 9” ▲ 401-8305 27.99 25.20 R V Triangle-5 Section 14” x 14” ❃ 401-8352 29.99 27.00 W Triangle-2 Pc. 9” x 12” & 12"x16" ❃ 401-8353 29.99 27.00

o

ide

v

C

n li n

e

D

o

SALE

E

G F J I

K

L

N M

O

Q

P

✓ Bowl & Tray Starter Kit Includes Templates A and B from

chart, plus: 1¼” Router Bit (144-2005B), Collet Extension WINTER (415-0660), and Preserve Oil (443-1000) from page 87. SAVE $47! 401-8300 If Sep. $132.21 Set $84.99

T

SALE

Acrylic Mounting Plate 11¾” Sq. (pg 51) 415-0503 $24.95 ▲ Bit 144-2005B required, ❃ Bit 144-1205B required (see page 87)

S V

U

Porcelain Ramekins, 6 oz.

33/4" diameter fits our bowl and tray templates Smooth, non-porous finish. Easy to clean! Superb resistance to stains, chips and scratches. Dishwasher, microwave, oven and freezer safe. 6 Pack 401-8316 $14.99

86

W

V & W Buy both templates to make a set of three stackable bowls

Bowl and Tray Templates “Chip and Dip” Party Package

“Party” Bowl and Tray Templates and Kit

Includes acrylic templates for $49.99! making tray and bowl servers, plus SAVE $15 six porcelain ramekins (P. 86). that are microwave, dishwasher and and oven safe. Includes (401-8309) Square Tray and (401-8308) Four Bowl Templates, plus (401-8316) Six Porcelain 6 oz. Ramekins.

SALE

Buy all 3 and Save $24!

3-Piece “Chip & Dip” Templates Package Includes Square Tray & Four Bowl Templates & 6 Porcelain Ramekins SAVE $15.00! 401-8356 If Sep $64.97 $49.99

Bowl and Tray Essentials

Router Collet Extension Give router bits an additional 2¼" of height. Eliminates the dangerous temptation of pulling the shank from the collet in order to raise the bit. Install in your router like any typical ½" shank bit.

Sale ends 2/28/17 Our durable, clear acrylic templates will make unique party serving trays and bowls, perfect for a birthday party or poker game. Instructions include examples on how to build and modify your designs. Available separately or as a three piece set. Template Tray Size Paw Print 10.5 x 11" 401-8362 Peace Sign 13.5" x 13.5" 401-8360 Daisy Approx. 15.5" 401-8361

Reg. $27.99 $24.99 27.99 24.99 27.99 24.99

Three Tier Server Template Kit

Preserve Non-Toxic Wood Oil A food safe blend of natural oil ingredients from exotic nuts. Restores and protects wood. Penetrates deeply, seals out moisture and food odors. Dries to a light golden brown. ¾” Bowl & Tray Bit with Bearing ½” Shank 1¼” Bowl & Tray Bit with Bearing ½” Shank Router Collet Extension Preserve Non-Toxic Wood Oil

144-1205B $32.95 144-2005B 35.95 415-0660 29.99 443-1000 14.29

Bowl and Tray Essentials Package! Includes all items above: Router Collet Extension, 2 Router Bits, & Wood Oil. $79.99!

SALE

SAVE $33

2" & 3½" Bowl / Profile Sanding Discs

Sand bowls or profiles Tear resistant cloth backed sanding media are flexible and smoothly conform to curves. Kits contain one hook and loop sanding pad (¼" shank) and 10 each of 80, 120, 180, 220, 320 and 400 grit sanding discs. More sanding options online. 2” Bowl Sanding Kit - ¼” Arbor 3½” Bowl Sanding Kit - ¼” Arbor

SALE

3-Piece “Party” Template Kit Includes Paw Print, Peace Sign and Daisy templates SAVE $24! 401-8365 If Sep. $83.97 $59.99

Bowl and Tray Bits with Bearing (page 21).

Complete Value Package 401-8321 If Sep $113.18 Set $79.99

WINTER

502-3000 502-4000

$44.99 54.99

Entertain your family and friends with style $11.00! Our Three Tier Serving Kit is the perfect way for you to display those goodies at the next gathering. It makes a beautiful, space saving centerpiece that is so versatile it can be separated into three independent trays if the occasion calls for it. Our Value Package (401-8344) includes the templates to make all three trays, the C B hardware kit you need to stack them and instructions. The hardware kit (401-8343) includes A (10) ¼"-20 threaded inserts and (6) ¼"-20 x 1¼" threaded studs. They can be connected using standard dowels and knobs you supply, or choose a hardwood and turn your own custom spindles. Note: router bit 144-2005B and extension 415-0660 required. USA

SAVE

Templates Tray Size A 2 Section Tray 11” Round 401-8332 $26.99 B 3 Section Tray 14” Round 401-8330 26.99 C 4 Section Tray 17” Round 401-8301 26.99 Tier Tray Hardware Kit 401-8343 9.99 Save $11! Complete Value Package (All of the above) 401-8344 If Sep $90.96 Set $79.99

www.EagleAmerica.com / 1-800-872-2511

87

Rocky 30 Trim Router with fixed base • Base accepts brass template guides! • Adjustable from 10,000 -30,000 rpm high performance 1-HP motor

Combo Rocky 30 Router with Fixed & Plunge Bases Page 67

Increase the versatility of your Rocky 30

n li n

e

o

o

o

e

nlin DEMO vi de

o

v

ide

SAVE $30!

Compact, easy to operate, heavy duty, variable speed, laminate trimmer/palm router. Durable machined aluminum housing. 1" long rule etched into aluminum housing. Rack and pinion height adjustment system. 415-6550 List $99.95 $69.95

Trim Router Wide Base with handles

2381 Philmont Ave. #107 • Huntingdon Valley, PA 19006

PRESORTED STANDARD US POSTAGE PAID EAGLE AMERICA

Large 5' x 8" acrylic base adds support. Pre-drilled for Rocky 30. Fits most trimmers. 415-6549 List $30.95 $24.95

SAVE $15!

Includes the Rocky 30 Router with Fixed Base plus the new Plunge Base. Features a quick release, three turret position depth stop for making repetitive or incremental cuts. Edge guide, plastic dust shield included. COMBO Rocky 30 with Fixed and Plunge Bases Includes 415-6550 and 415-6547 415-6585 List $109.90 $94.95 Rocky 30 Plunge Base only 415-6547 $39.95 NEW! Rocky 30 Plunge Base Brass Adaptor Ring 415-6546 List $19.95 $9.95

Combo Mini Trim Router Table and Rocky 30 Router

Includes a Router Plate, Fence and a Dust Port!

Page 67

SAVE $10!

Designed to work with the Rocky 30 Trim Router. Melamine tabletop with MDF core includes a clear acrylic router insert plate. Drilled to accept Rocky 30. Fence has a 2½" OD dust port and safety guard. Clamp or screw onto work surface. COMBO Mini Trim Table and Rocky 30 Includes 415-6575 and 415-6550 415-6590 List $119.90 $109.95 Mini Trim Router Table only 415-6575 List $59.95 $49.95