Tuesday 14th

1.6.2016

NORDTRIB 2016 Tuesday 14th June Registration (Open June, 14-15 during the conference hours) 11:30

Lunch

13:00

13:00 - 13:20 Opening of NORDTRIB 2016 / Plenary room CEO Antti Vasara, VTT Technical Research Centre of Finland Ltd

13:00 13:30 13:30

Plenary 1: Margaret Stack - Tribocorrosion / Plenary room

14:10 14:10

Break

14:30 14:30

15:50

Chairs 14:30

14:50

15:10

15:30

Wear and friction 1 / Plenary room

Tribocorrosion 1 / Room 12

218 Mechanisms and influencing factors of galling in hot forming L. Pelcastre, J. Hardell, B. Prakash

255 Evolution of chemical and mechanical properties of the tribofilms on steel and DLC surfaces with fully formulated oils at different sliding times 14:50 S. Akbari, E. Oblak, M. Kalin 124 164 Friction and anti-galling properties of hexagonal boron nitride Extreme pressure properties and mechnism of bismuth (h-BN) in aluminium forming Naphthenate with sulphur isobutene additives in lubricants B. Podgornik, F. Kafexhiu, T. Kosec, J. Jerina, M. Kalin J-Q. Hu, X. Xu, S-Z. Yang 15:10 175 261 Impact-sliding wear characteristics of treated stainless steel at Tribocorrosion of different types of Diamond Like Carbon room temperature and 400ºC (DLC) coatings in different electrochemical media S. Komiyama, J. Yoshihisa, T. Yamazaki, J.C. Abry, G. Bouvard, N. Espallargas, C. Torres, J. Sanchez-Adam, B. Blug, S. 15:30 V. Fridrici, Ph. Kapsa Schnakenberg, H. Ronkainen 297 291 High temperature erosion mechanism of NiCr alloy Influence of the worn area size on the corrosion-wear A. Raghav, A.M. Tortora, D.H. Veeregowda response of a HSLA steel and evaluation of potential protective coatings 15:50 A. López, R. Bayón, A. Arredondo, J.L. Arana, A. Igartua

15:50 18:00

Chairs 16:20

16:40

17:00

17:20

17:40

Wear and friction 2 / Plenary room

19:00 19:00 20:00

140 Microstructural and Chemical Characterization of the Tribofilm Formation in Highly Loaded Cylinder Roller Thrust Bearings C.J. Hsu, A. Stratmann, C. Gachot 143 Performance of self-lubricating materials for hydropower applications under different lubricating conditions K. Berglund, Y. Shi 194 Boric acid as a lubricating fuel additive – adaption of a labtest technique to mimic piston/cylinder conditions E. Larsson, P. Olander, S. Jacobson

Tribocorrosion 2 / Room 12

224 Comparison of laboratory wear test results with the in-service performance of cutting edges of loader buckets 16:40 K. Valtonen, V. Ratia, N. Ojala, V.-T. Kuokkala 167 Micrometre compressions to facilitate controlled wear in groundwood pulping M. Heldin, U. Wiklund 17:00 278 Analysis Of The Wear Processes Of Materials Of Steam Turbine Blades Used In Power Industry W. Napadłek, W. Chrzanowski 17:20 215 Correlation of wear and work in dual pivoted jaw crusher tests 17:40 J. Terva, K. Valtonen, P. Siitonen, V.-T. Kuokkala 118 Investigation of the thermo-mechanical behaviour of clutches using fiber optic sensing technology with high spatial measurement density A. Albers, S. Ott, B. Lorentz, J. Kniel, M. Eisele 18:00

18:30

264 Performance of lubricating oils for wind turbine gear boxes and bearings C. Burkhart, J. Johansson, J. Ukonsaari, B. Prakash

Coffee break & poster session

16:20 16:20

Lubrication and lubricants 1 / Room 13

129 Corrosive wear behaviour of various stainless steel alloys and a Stellite 6 weld cladding F. Brownlie, T. Hodgkiess, A. Pearson, A.M. Galloway 269 Tribocorrosion behaviour of CuSn12 alloy under sliding contact in NaCl containing environment E. Huttunen-Saarivirta, L. Kilpi, A. Laukkanen, H. Ronkainen 150 Erosion-corrosion resistance of various stainless steel grades in high-temperature sulfuric acid solution M. Lindgren, S. Siljander, R. Suihkonen, P. Pohjanne, J. Vuorinen 270 RAEX 500 steel under sliding contact in NaCl corrosive environment L. Kilpi, E. Huttunen-Saarivirta, A. Laukkanen, H. Ronkainen

Lubrication and lubricants 2 / Room 13 232 Mimicing nature? From multiscale surface patterns to enhanced lubricant storage lifetime P.G. Grützmacher, A. Rosenkranz, C. Gachot, F. Mücklich 253 The Interaction of Bio-lubricants with Elastomers, Tested Through Hanson Solubility Parameter and Stress Relaxation Tests J. Carrell, R. Lewis, T. Slatter 225 Study on the tribology property of Fullerene as lubricating additive F. Xie, Y-G. Zhang, J-Q. Hu, S-Z. Yang, F. Xie, L. Guo 262 Graphene as a possible additive to PAO oil for lubrication of DLC J. Kogovšek, M. Kalin 294 Quantitative dispersion stability measurement of TiO2 nanolubricant and its influence on hydrodynamic pressure generation in fluid film bearingsoil using UV-vis spectrophotometry K.G. Binu, R. D’Silva, B.S. Shenoy, D.S. Rao, R. Pai

Welcome reception hosted by City of Hämeenlinna, Ari Räsänen Restaurant Aulanko Dinner at Aulanko

Wednesday 15th

1.6.2016

NORDTRIB 2016 Wednesday 15th June 8:30

Pleanary 2: Anssi Laukkanen - Modelling

9:10 9:10

Break

9:30 9:30

11:10

Chairs 9:30

9:50 9:50

10:10 10:10

10:30 10:30

10:50 10:50

11:10

Wear and friction 3 / Plenary room 260 Improvement of tribological properties of polymer PEEK using nano and micro scale solid lubricants M. Zalaznik, M. Kalin, N. Novak, J. Kovač 210 Edge effect in high speed slurry erosion wear tests of steels and elastomers N. Ojala, K. Valtonen, A. Kemppainen, J. Minkkinen, V-T. Kuokkala 202 Tribological properties of copper alloy surfaces modified using a mechanical process Y. Hirai, H. Usami, T. Sato 119 The effect of plastic deformation of Cu and α/β brass on friction and wear in lubrication conditions A. Moshkovich, V. Perfilyev, I. Lapsker, L. Meshi, L. Rapoport 117 Influence of CVD and PVD coating micro topography on the initial material transfer of 316L stainless steel in sliding contacts – A laboratory study S. Saketi, M. Olsson

Modelling 1 / Room 12

Lubrication and lubricants 3 / Room 13

126 Modelling the Lubrication of Artificial Ski Matting I. Sherrington 125 A model analysis of non-lubricated dynamic sliding friction K. Arakawa

211 Sliding Contact Analysis between a Hard Particle Embedded in the PTFE Seal and TiN-Coated Steel Substrate T.J. Park, M.G. Kim, H.J. Rhee 249 Load & Stiffness of a Planar Ferrofluid Pocket Bearing S.G.E. Lampaert, J.W. Spronck, R.A.J. van Ostayen

276 The lubricity of glycerol and its solutions I.M. Sivebaek, J. Jakobsen

267 Comparison of Lennard-Jones Interaction and Maugis-Dugdale models of Adhesion for the Adhesive Contact Analysis of a Bisinusoidal Interface M. Bazrafshan, M.B. de Rooij, M. Valefi, D.J. Schipper

184 Improvement in the tribological performance of room temperature ionic liquids by additive technology E. Nyberg, N. Dörr, A. Igartua, I. Minami

11:10

13:10

Wear and friction 4 / Plenary room

Chairs 11:30

11:50

285 Adhesive contact of rough surfaces: the hysteresis loop in the loading - unloading process 11:50 G. Carbone, E. Pierro 247 The effect of surface topography on dry fretting A. Lenart, P. Pawlus, A. Dzierwa, J. Sęp

Industrial Tribology 1 / Room 12

Lubrication and lubricants 4 / Room 13

131 Case Study: The effect of an amorphous carbon coated gearwheel on an orbital motor’s volumetric efficiency over time C.A. Bates, H.W. Broe-Richter, C.R. Bendlin, P. Ennemark 188 Mapping the effect of temperature and sliding velocity on friction and wear of Si3N4, Al2O3, and ZrO2 balls tested against AlCrN PVD coating M. Antonov, H. Afshari, J. Baronins, E. Adoberg, I. Hussainova

292 Anhydrous Calcium grease – a high performance Eco labelled grease J. Persson, R. Ardai 293 Lubrication mechanism of polypropylene thickened grease: Improved energy efficiency and grease life R. Westbroek, J. Leckner

123 The influence of road surface texture on the skid resistance under wet conditions R. Kienle, W. Ressel, M. Weise

190 Surface texturing to promote formation of protective tribofilms on combustion engine valves R. Elo, J. Heinrichs, S. Jacobson

163 Degradation mechanism of bearing lubricating greases operating in a vacuum M. Vlad, A. Cobley

193 Effects from roughness on sliding friction on ice – applied to curling M. Heldin, S. Hogmark, H. Nyberg, S. Jacobson

138 Steel turning with nickel-iron bound hard metal tools – a study on microstructure in plastically deformed inserts L. Toller, S. Jacobson, S. Norgren

136 Global rethinking of the lubrication of ferritic stainless steel sheets – low friction and wear using strongly diluted alcohol solution of alkylphosphonic acid X. Roizard, J. Heinrichs, A. Butéri, S. Jacobson, M. Borgeot, L. Carpentier, J.M. Melot, F. Lallemand

189 Friction studies of metal surfaces with various 3D printed patterns tested in dry sliding conditions Y. Holovenko, M. Antonov, L. Kollo

108 Pipelines indent failure analysis using steel precision ball under subsea conditions W.S. Gill, M.B. Marshall, R. Lewis, B. Hall, S. Bolton

280 The Thermal Capillary Migration Properties and Controlling Technique of Ferrofluids Q. Dai, W. Huang, J. Wang, X. Wang

12:10 12:10

296 Halogen free ionic liquids as additives to biodegradable oils P. Rohlmann, O.N. Antzutkin, M.W. Rutland, S. Glavatskih

Break

11:30 11:30

120 Novel Group I replacement base oils – an available solution for industrial lubricant applications T. Norrby 107 New intelligent fluids with enhanced lubricity E. Nowiński

12:30 12:30

12:50 12:50

13:10 13:10 15:30

Wear and friction 5 / Plenary room

Chairs 14:10

14:30

14:50

15:10

244 The effects of surface conditioning and lubricant type on friction and wear behavior using a ball on disc tribometer under sliding condition I.S. Tertuliano, T.P. Figueiredo, T. Cousseau, G.A.A. Machado, I. 14:30 F. Machado 245 Influence of the Test Time in the Wear and Friction Coefficient in Sliding of Al2O3–Al2O3 in Water 14:50 R.P. Oliveira, A. Sinatora 155 The concept of pVt limits in a boundary lubricated scuffing prediction 15:10 L. Wojciechowski, T.G. Mathia 219 Experimental determination of effect of soot on engine oil K.S. Pondicherry 15:30

Industrial Tribology 2 / Room 12

Chairs 16:00

16:20

16:40

17:00

17:20

185 Effects of lateral vibrations on film thickness distribution in a point EHL contact J. Fryza, P. Sperka, I. Krupka, M. Hartl

298 251 Interaction study between components in friction pad material Behaviour of EHL Films under Impact Loading F. Vivier, D. Pellerej H. Nishikawa, N. Ohno 275 On Coulomb and Viscosity damped single-degree-of-freedom vibrating systems J. Jakobsen, I.M. Sivebaek 256 Wear and friction in mining equipment - three case studies P. Härkisaari, K. Holmberg

236 Experimental study of grease EHL contact starvation D. Kostal, P. Sperka, I. Krupka, M. Hartl 110 Improvers of pressure-viscosity coefficients of two-phase liquid-solid lubricants G.K. Gyimah, Z. Guo, P. Huang, S. Jiang, G.C. Barber

Wear and friction 6 / Plenary room

Industrial Tribology 3 / Room 12

Tribology of machine elements 1 / Room 13

207 243 Approximate expression for cross sectional profile of wire and Analysis of the impact of "cold laser ablation" on selected contact helix equation for study of internal friction of wire properties of the surface layer of steel 100CrMnSi6-4 rope W. Napadłek 16:20 K. Imado 266 213 268 Friction coefficient in dry three-body contact Microscopic experimental investigation of the friction of vBenchtop Screening of Wet Clutch Materials J.H. Horng, Y.Y. Chen ribbed belt under wet conditions linked with macroscopic S.J. Shaffer, T. Freshly, S.E. Papanicolaou instabilities at a Belt-Pulley interface 16:40 S. Gatignol, T. Demassougne, A. Le Bot 209 174 165 Effects of hardness, microstructure, normal load and abrasive Influence of Surface Form Deviations on Friction in Mixed Wheel Rail Adhesion and Film Formation – The Influence of size on friction and wear of 35NCD16 steel Lubrication Friction Modifier Composition C. Trevisiol, A. Jourani, S. Bouvier S. Fricke, C. Hager, S. Solovyev, M. Wangenheim, J. Wallaschek R. Galas, M. Omasta, I. Krupka, M. Hartl 17:00 216 132 304 Impact behavior of martensitic steel at low temperatures Design of a Non-Contact Electromagnetic Exciter Used for High- Early indications of piston ring scuffing by acoustic emission V. Ratia, M. Lindroos, K. Valtonen, M. Apostol, V-T. Kuokkala Speed Bearings measurements 17:20 L. Wang, X. Xiong, H. Xu, G. Chen, H. Su J. Halme, P. Andersson, T. Sillanpää 258 133 Study of wear mechanisms at high temperature scratch testing Dynamic Coefficients Identification of Water-lubricated Hybrid M. Varga, S. Leroch, H. Rojacz, M. Rodríguez Ripoll Journal Bearings Using Non-Contact Excitation 17:40 G. Chen, L. Wang, H. Xu, H. Su, X. Xiong

18:00 19:00

172 Multiscale characterisation of 3D surface topography of DLC coated and uncoated surfaces by directional blanket covering (DBC) method M. Wolski, P.Podsiadlo, GW. Stachowiak, K. Holmberg, A. Laukkanen, H. Ronkainen, M. Gee, J. Nunn, C. Gachot, L. Li 192 Topographical orientation effects on surface stresses influencing on wear in sliding DLC contacts, Part 2: Modelling and simulations A. Laukkanen, K. Holmberg, H. Ronkainen, G. Stachowiak, P. Podsiadlo, M. Wolski, M. Gee, C. Gachot, L. Li 195 Surface Roughness Effects on Cumulative Sliding Wear of DLC and Steel Surfaces: Real-time Experiments M.G. Gee, J.W. Nunn, K. Holmberg, G. Stackiowicz, C. Gachon, L. Li 196 Evaluation of Coated and Uncoated Steel by In situ Microtribology Experiments M.G. Gee, J.W. Nunn, K. Holmberg, G. Stackiowicz, C. Gachot, L. Li

IEA 2: Thin coatings and their modelling / Room 14 173 Contact area and maximum equivalent stress in elastic spherical contact with thin hard coating R. Goltsberg, I. Etsion

169 Plasticity evolution in a coated sphere compressed by a rigid flat Z. Chen, R. Goltsberg, I. Etsion 170 A universal model for an elastic-plastic coated sphere contact with moderate to large coating thickness Z. Chen, R. Goltsberg, I. Etsion 257 Tribological properties of textured DLC films T.M. Shao, Z. Geng, H.F. Shang, H. Liu

Coffee break & poster session

16:00 17:40

Lubrication and lubricants 5 / Room 13

289 The running-in corridor – A detailed look into running-in dynamics M. Scherge

15:30 16:00

208 Why do we need 3D characterisation of surface topographies? G.W. Stachowiak, M. Wolski, P. Podsiadlo

Lunch

14:10 14:10

IEA 1: Surface topography effects on friction and wear / Room 14

122 Analyzing wear particles on the nano scale R. Wäsche, M. Hartelt, V-D. Hodoroaba

IEA 3: Surface texturing and lubricated wear / Room 14 300 Surface texture design and applications S. Hsu

254 The effect of laser interference patterning on the running-in under dry sliding conditions B. Lechthaler, C. Gachot, F. Mücklich 287 Evaluation of friction and wear performance of different diamond-like carbon coatings in automotive ring and liner application L. Li, S. Hsu 301 Ultra-low viscosity lubricant and its impact on wear in the hot zone S. Hsu

Dinner at Aulanko

19:00 Finnish Sauna evening 21:00 Page 2

Thursday 16th

1.6.2016

NORDTRIB 2016 Thursday 16th June 8:30 9:10

Pleanary 3: Maria Isabel De Barros Bouchet - Coatings & lubrication / Plenary room

9:10

Break

9:30 9:30

11:10

Chairs 9:30

Surface engineering and coatings 1 / Plenary room 111 Thick ta-C coating for tribological application in cutting tools Y-J. Jang, D-S. Kim, J-K. Kim, Y.J. Kang, G.T. Kim

9:50 9:50

10:10

10:30

10:50

135 Influence of bias voltage and layer thickness variation on mechanical properties and tribological behaviour of a-C:H:W multilayer coatings 10:10 T. Weikert, S. Tremmel 112 Hydrogen free of ta-C thick coating with FCVA for automobile accessories 10:30 J-K. Kim, Y-J. Jang, Y.J. Kang, D-S. Kim, G.T. Kim 144 Investigation of Tribological Behaviour of a-C:H Coatings for Dry Deep Drawing of Aluminium Alloys R. Zhao, J. Steiner, K. Andreas, M. Merklein, S. Tremmel 10:50 274 Frictional performance of laser-textured diamond-like nanocomposite films E. Zavedeev, O. Zilova, M. Shupegin, A. Barinov, T. Roch, S. 11:10 Pimenov

11:10 13:10

Surface engineering and coatings 2 / Plenary room

Chairs 11:30

11:50

12:10

127 New Perspectives in Hardmetal Abrasion Simulation A.J. Gant, J.W. Nunn, M.G. Gee, D. Gorman, D.D. Gohil, L.P. Orkney 303 Wear of boiler steels under impacts by solid particles E. Huttunen-Saarivirta

242 The role of microstructure in high stress abrasion of white cast irons V. Heino, M. Kallio, K.E. Valtonen, V-T. Kuokkala 259 Influence of load and temperature on in-situ formed layers during high temperature abrasion M. Varga, E. Badisch, K. Adam 305 Computational design of wear resistant materials T. Suhonen, A. Laukkanen, T. Andersson, T. Hakala

Tribology of machine elements 2 / Room 13 153 On the Effect of Starved Lubrication on Elastohydrodynamic (EHL) Line Contacts M. Ebner, M. Yilmaz, T. Lohner, K. Michaelis, B.-R. Höhn, K. Stahl 191 The effect of contact configuration on the tribological behaviour of different coating-lubricant combinations T. Mishra, B. Nordin, D. Svanbäck, S. Tervakangas, B. Prakash 302 Tribological behaviour of polymer seal materials in an environmentally acceptable lubricant A. Dube, D. H. Veeregowda 137 The correlation between gear contact friction and ball on disc friction measurements M. Björling, J. Miettinen, P. Marklund, A. Lehtovaara, R. Larsson 183 Detection of gear pitting failure progression with on-line particle monitoring J. Kattelus, J. Miettinen, A. Lehtovaara

Break

11:30 11:30

Wear resistant materials 1 / Room 12

114 Tribological evaluation of multilayer coatings for wear applications M. Anand, G. Burmistroviene, Y. Zhang, I. Tudela, R. 11:50 Verbickas, G. Lowman 146 Tribological investigations of CrAlN and CrAlSiN in different atmospheres at elevated temperatures 12:10 M. Rebelo de Figueiredo, A. Xia, S. Kolozsvári, R. Franz 200 Controlling rubber friction: effect of the coating thickness G. Pallares, R. Sahli, I. Ben Ali, S. Al Akhrass, J. Scheibert

Wear resistant materials 2 / Room 12

Tribology of machine elements 3 / Room 13

130 Processing and Wear Testing of Novel High-Hardness WearResistant Steel O. Haiko, I. Miettunen, D. Porter, N. Ojala, V. Ratia, V. Heino, A. Kemppainen 206 Friction and wear of self-mated nanostructured carbide-free bainitic steels P. Valizadeh Moghaddam, J. Hardell, E. Vuorinen, B. Prakash 265 Friction and wear of hard faced metal-to-metal dry sliding contacts S. Dizdar

148 Functional investigation of zero lead radial shaft seal countersurfaces turned with a special method S. Thielen, B. Magyar, B. Sauer, F. Schneider, P. Mayer, B. Kirsch, R. Müller, E. v. Harbou, J.C. Aurich 197 Automated Failure Detection for Sealing Surfaces F. Bauer, M. Baumann, W. Haas

237 Case study and application of wear resistant materials for ore grinding type “twin shaft sizer” M.H. Ara, J.A. Rodrigues, M.C. Mattos, A. Sinatora

160 Investigation of Different Piston Ring Curvatures on Lubricant Transport along Cylinder Liner in Large Two-Stroke Marine Diesel Engines H.C. Overgaard, P. Klit, A. Vølund 234 Numerical analysis of EHL in cam mechanisms M. Shirzadegan, R. Larsson, A. Almqvist

229 Shaft seal for separation of water and air with low frictional torque - Fiber reinforcement of seal lips for high speed operation T. Honda, K. Kasamura, Y. Nakashima, H. Higaki, Y. Nakanishi

12:30 12:30

12:50 12:50

152 Wear behaviour of different elastomer types in Taber Abraser tests D.M. Paulkowski, S. Karpinski

288 Preparation and Characterization of Polyamide-imide Bonded MoS2/SiOx Dry Film Lubricant by Sol-gel Process 13:10 L. Huo, H. Zhou, K. Zhang, S. Gou, Z. Jiang

13:10 13:30

Lunch

Practical tribology testing workshop / Room 14

14:10 14:10

15:30

Chairs 14:10

14:30 14:30

14:50

15:10

Surface engineering and coatings 3 / Plenary room 159 Mechano-Chemically Modified Surfaces for Friction and Wear Reduction H. Kasem, G. Ryk

179 Nitro carburized steels for high stress tribological components - influence on seizure limits from steel grade and surface treatment parameters 14:50 V. Westlund, S. Jacobson 176 Effect of combined additions of Si, Mn, Cr and Al to carbon steel on material transfer in a steel / TiN coated tool sliding contact 15:10 T. Aiso, U. Wiklund, M. Kubota, S. Jacobson 233 The properties of surface layer gray cast iron modified ablative laser micromachining W. Napadłek, A. Woźniak, C. Pakowski 15:30

15:30 17:40

Chairs 16:00

16:20 16:20

16:40 16:40

17:00 17:00

17:20 17:20

17:40 18:00 18:30 19:00

279 The effects of microstructure on erosive-abrasive wear behavior of carbide free bainitic and boron steels E. Vuorinen, V. Heino, N. Ojala, O. Haiko, A. Hedayati 171 Influence of the type of abrasive particle and abrasive slurry concentration on the micro-abrasive wear behaviour of Fe30Al-6Cr (at.%) iron aluminide alloy R.C. Cozza, A.F.M. de Paula, C.G. Schön 281 Erosion resistance testing of Cobalt based material fabricated by two laser techniques W. Napadlek, T. Plocinski, W. Chrzanowski, T. Durejko, K.J. Kurzydlowski

Polymer tribology 1 / Room 13

Surface engineering and coatings 4 / Plenary room 226 Influence of microstructure and mechanical properties on the wear behavior of reactive arc deposited Zr-Si-N coatings at room temperature and elevated temperature K. Yalamanchili, L. Pelcastre, M. Oden, B. Prakash, J.J. Roa, E. Jimenez 282 Mechanical characterization and single asperity scratch behaviour of zinc and manganese phosphate coatings D. Ernens, M.B. de Rooij, D.J. Schipper, H.R. Pasaribu, E.J. van Riet, W.M. van Haaften 273 Tribological properties of atomic layer deposited thin films against silicon L. Kilpi, O.M.E. Ylivaara, A. Vaajoki, X. Liu, V. Rontu, S. Sintonen, E. Haimi, J. Malm, M. Bosund, M. Tuominen, T. Sajavaara, H. Lipsanen, S-P. Hannula, R.L. Puurunen, H. Ronkainen 162 High-temperature sliding wear behaviour of thermally sprayed Cr3C2-based coatings V. Matikainen, G. Bolelli, H. Koivuluoto, S. Sassatelli, L. Lusvarghi, P. Vuoristo

Rock tribology 1 / Room 12

As part of NORDTRIB 2016, BlueScientific and Bruker are pleased to offer delegates the opportunity to attend a practical workshop on the topic of Tribology Testing and Surface Metrology. Experts from Bruker, including Dr. Steven Shaffer, will be discussing various aspects of tribology and mechanical testing as well as surface metrology, for tribology 283 applications in materials research and development. There Tribology of amorphous polymers in heavy-duty applications will also be an opportunity to see Bruker’s tribology testing J. Sukumaran, L. Toth, G. Szebényi, P. De Baets and surface profiler instruments in live demonstrations. For further details and to register for this workshop, 139 An Investigation of Polymer Gear Wear and its Load Carrying Capacity K. Mao, D.K. Gu, D. Greenwood, N. Madhav, Y. Zhang, M. Millson, X. Xu 142 Studying the tribological properties of PEEK composites lubricated by different lubricants for hydropower turbine application Y.J. Shi, H.S. Vadivel, K. Berglund

Polymer tribology 2 / Room 13 230 Self-forming carbon film lubrication for carbon fibre filled PTFE in high purity hydrogen gas environment Y. Sawae, H. Kojima, T. Morita, K. Takeda, H. Uejima, J. Kaneuti, J. Sugimura

252 Surface degradation mechanisms of cemented carbide drill buttons exposed to iron ore rock drilling M. Olsson, K. Yvell, J. Heinrichs, M. Bengtsson, S. Jacobson

181 Chemically modified PTFE particles as solid lubricant additive for the fixation on substrate surfaces T. Hoffmann, D. Lehmann, M. Anders, T. Schmidt, T. Heinze, M. Michael 272 Tribological behaviour of polymer seal materials in an environmentally acceptable lubricant S. Bernat, A. Brink, M. Lucas, N. Espallargas

250 High temperature friction and wear of polycrystalline diamonds A.M. Tortora, D.H. Veeregowda

please click here…

Coffee

141 Initial wear of cemented carbides in sliding contact with different rock types J. Heinrichs, M. Olsson, S. Jacobson

228 Degradation mechanisms of matrix steel in rock drill bits U. Wiklund, M. Olsson, S. Jacobson

Tribology Testing and Metrology Workshop with Bruker, Thursday June 16th, 13:30 – 18:00.

235 Evaluation of dry friction solutions for industrial applications E. Edling, Å. Kassman Rudolphi, A. Andersson, S. Zhao, Å. Öberg

Coffee break & poster session

16:00 16:00

Wear resistant materials 3 / Room 12

134 Tribological behavior of polyacetal filled with particulate or fibrous filler under water lubrication K. Shibata, R. Kitamura, T. Ii, T. Yamaguchi, K. Hokkirigawa 177 Cross section microscopy studies of wear tested polymer composites J. Lind, Å. Kassman Rudolphi

Departure for the Banquet at 18:30

19:00 Conference Banquet, The Häme Castle 19:00 Castle tour 20:00 Dinner 23:00

Page 3

Friday 17th

1.6.2016

NORDTRIB 2016 Friday 17th June 8:30

Pleanary 4: Patrick De Baets - Polymer tribology

9:10 9:10

Break

9:30 9:30

11:30

Chairs 9:30

9:50 9:50

10:10

10:30

10:50

11:10

198 Antiwear properties and mechnism of tungsten disulphide nanoparticles in base oils S.Z. Yang, J-Q. Hu, X. Cheng

154 Multi-asperity nanotribometer and quartz crystal resonator in situ measurements for studying the sliding threshold at the nanoscale Ph. Stempflé, A. Domatti, J-M. Friedt, J-M. Cote, M. Billot, E. 10:10 Herth, E. Piat, J. Takadoum 149 The effect of albumin and γ-globulin on lubricant film formation in artificial hip joints D. Nečas, M. Švachová, M. Vrbka, I. Křupka, M. Hartl 10:30 151 Development and Validation of an Optical Scanning Method for Volumetric Wear Analysis of Polyethylene Acetabular Cups M. Ranuša, M. Vrbka, I. Křupka, M. Hartl 10:50 161 Effect of micro slurry-jet erosion on the tribological behaviour of polymer material of artificial joint Y. Nakanishi, Y. Nakashima, Y. Fujiwara, Y. Komohara, M. 11:10 Takeya, H. Miura, H. Higaki 277 The lubrication lift-force mechanism of the porous endothelial surface layer acting on moving red blood cells X. Zhang, S. Zhang, Y. Meng, H. Hu

11:30 11:30

Nano- and biotribology 1 / Main conference room

12:30

12:30 13:30

Tribology of machine elements 4 / Room 12 105 Characteristic of hydrodynamic plain bearings with bonded coating B. Prase, E. Leidich 180 Modelling and Analysis of Elastic and Thermal Deformations of a Hybrid Radial Journal Bearing A. Linjamaa, A. Lehtovaara, M. Kallio, S. Söchting

Polymer tribology 3 / Room 13 201 Direct observation of deviations from Amontons' law: visualizing frictional contacts with pressure sensitive molecules B. Weber, T. Suhina, A.M. Brouwer, D. Bonn 204 Effect of contact area reduction under shear on static friction R. Sahli, G. Pallares, C. Ducottet, J. Scheibert

222 Load capacity of bismuth bronze bimetal bearing in lubricated conditions V. Oksanen, A. Lehtovaara, M.H. Kallio

145 Wear of high-performance waxes due to friction between ski and snow S. Rohm, S.H. Unterberger, M. Hasler, L. Kaserer, J. van Putten, R. Lackner, W. Nachbauer 223 248 Space-resolved micro-tribological investigations of boundary Temperature- and Time Dependency on High Friction layers on bearing surfaces between Paper Coated with poly(Styrene-co-Butyl F. Pape, G. Moebes, G. Poll Methacrylate) and Wood C. Bjerrmand, M. Hinge 263 TriboTronics The comparative study of polymers for sliding pairs with Tribotronics is “the active control of tribological elements”. UNMT (Universal Nano/Micro Tester) Active control includes manipulation of electronic and mechanical components as well as control of the physical and A. Król, K. Gocman, W. Napadłek chemical behavior of fluids and materials which may have a function at an interface. A small number of active tribological systems are under development. However, with rapid developments in micro actuators, sensors, miniature power units, wireless transfer and the internet of things, interest in these systems is increasing rapidly as applications in maintenance and improved functionality become evident. This session will begin with a short presentation on the development of tribotronics from Prof Ian Sherrington and will be followed by an open discussion on the topic.

11:30-12:30 Tribology beyond 50 years aniversary of Jost report - Round table discussion & Conference closure Lunch

Page 4

Poster session

Poster sessions 1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

106 The changes of electrical resistance for boundary oil film E. Nowiński 109 Tribological behavior of pongamia oil based biodiesel blended lubricant at different load Y. Singh, A. Singla, S. Bhurat 116 Tribological Aspects of Physical Mesomechanics A.M. Pashayev, A.Kh. Janahmadov, N.G. Javadov, M.Y. Javadov 121 Development of Contact Algorithm for Bearing Durability Analysis considering Dynamic Characteristics S.P. Lee 128 Tribological Properties of Cu-alloy sintered in Vacuum Atmosphere ～Application of Sulphide Dispersed Bronze～ T. Sato, A. Jingu, M. Takuma, K. Saitoh, Y. Takahashi, Y. Hirai 156 Enhancing the electrical conductivity and wear resistance of tetrahedral amorphous carbon (ta-C) films by using filtered cathode vacuum arc plasma Y.J. Kang, D.S. Kim, Y.J. Jang, J.K. Kim 158 Studying the effect of out-of-flatness on leakage in face seals by means of numerical simulations F. Pérez-Ràfols, L. Canhasi, A. Almqvist 182 Analysis of Friction in Contact between Bodies with Fractal Surface Geometry M. Kuchar, K. Siczek, A. Stefanski 199 The influence of stacking fault energy on the friction of nanotwinned fcc metals J. Zhang, Z. Wang, Y. Yan, T. Sun 203 External models of dynamics in friction interaction V. Musalimov, A. Tyurin, K. Nuzhdin, G. Ismailov 205 A Role of Lubricant Rheology on Roughness Effects in an EHL Contact P. Sperka, I. Krupka, M. Hartl 220 Friction and wear characteristics of some heat treated steel against EN-8 stainless steel A. Mukhopadhyay, S. Kumar 231 The Tribological Performance of Iron Oxide Coating for Bearing Applications V. Brizmer 239 Experimental determine the effect of selected parameters of ablative laser texturing on the geometry of the lubricating micro-reservoirs manufactured on 100CrMnSi6-4 steel W. Napadłek 241 Analysis of the usefulness of the model tester WAT-1 in tribological research W. Napadłek, A. Woźniak, W. Chrzanowski 295 Tribology of selective laser melting processed parts: microstructure, friction, and wear of Ti6Al4V and stainless steel 316L Y. Zhu 299 Water-based boundary lubrication with biomolecule additives on diamond-like carbon and stainless steel surfaces T.J. Hakala

1.6.2016