Nitrox Network Egypt
Nitrox Network Maldives
School Street Beside Elektric Company Hurghada Red Sea | Egypt
H. Esjehivilla 4th floor Medhuziyaraiy Magu Male‘ | Rep. of Maldives
[email protected] [email protected]
[email protected] [email protected]
Phone 0020(0)653451270 Mobile 0020(0)191177993
Phone 009607684306
NRC International GmbH
ProNRC
Kölner Straße 159 51645 Gummersbach Tel.: 02261/500414
Sudetenstr. 21 64572 Büttelborn Tel.: 02261-500 416
[email protected] www.nrc-international.com Fax: 02261/500415
Nitrox Network
[email protected] www.pronrc.com Fax: 02261-42617
High Standard Best Quality
High Standard
High Standard Best Quality
Best Quality q
Made in Germany Professional
ProNRC Crossover If you are already a Nitrox instructor from another organisation, then you just need to fill in an application form to become a ProNRC Nitrox instructor. You just need to mail us the form together with a photo and a copy of your previous Nitrox instructor card and within a few days we will give you an instructor number and access to the member area on our website. For your 79,- Euro annual fee you will get 2 complete Kits free of charge and a DVD with all the presentations, exams and answer keys on it. We also have free Pro NRC Nitrox flags for the dive centers.
31
Inhalt NRC Products NRC Membrane Systems Air Pro Series Light Series
4 4 6
NRC Compressors Compressor AP 100 Compressor AP 170 to AP 320 Compressor AP 170S to AP 320S Compressor AP 400S to AP 625S
8 8 10 12 14
NRC Nitrox System
16
NRC Analyser Pick O2 Analyser O2 Professional Analyser Helium Analyser
18 18 20 21
NRC Oxygen Sensors
22
NRC Accessories
24
ProNRC Products Nitrox Training Material
26
Submatix Training Material
28
ProNRC Accessories
30
1
NRC Air Pro Series
The completely revised Air Pro Series now sets new standards in Nitrox production. It is a completely integrated system which will withstand even the most hardest conditions.
Extended operational time power reduced industrial compressor technology very high quality in construction, components and production High performance with low power input energy saving regulation compressor element and electric drive with high efficiency compact construction
4
The control and monitoring systems of the Air Pro Series are simplified even further than existing NRC gas management range. All necessary information like pressure, oil temperature and service intervals is presented on a clear and easy to read LCD display on the front panel.
High air quality
The assembly effort decreases to a minimum, because the system is delivered ready for use and tested.
High reliability
special designed oxygen module
no wear in the oxygen modules
filter unity free of oil, refrigerant dryer and industrial filter
an industrial rotary screw compressor reduced in its revolution speed
Compact and rugged construction complete integrated system rugged powder-coated 2 millimetre steel case (also as stainless steel available)
industrial construction Low maintenance costs long service intervals few wearing parts extra long lifetime of all components
In the NRC Air Pro system, a power reduced rotary screw compressor performes its work. Maximum durability and operation period is guaranteed by the power reduction of this special system. The access to the low pressure compressor, refrigerant dryer and filter system has been optimized, so service and maintenance allows the technician uncomplicated and unimpeded access to the whole system.
A special “Tropical Kit” (optional) ensures a high standard of performance even at very high ambient air temperature and humidity. The dry and clean air from the low pressure compressor passes a triple filter array then passes, as oil free and high purity breathing air, into a hollow fibre membrane. The membrane body is a specially designed oxygen module, which
distinguishes itself by its excellent air quality and air supply performance. The performance of the fibre membrane is limited by a safety valve to ensure a long constant economic lifetime. The Air Pro Series has a performance of 300 to 1000 l/min Nitrox with up to 40 % oxygen, therefore, it is the optimum system for middle and large Dive Centers.
Performance
Air Pro 5,5
Air Pro 7,5
Air Pro 11
Air Pro 15
Delivery rate 32% Nitrox
300 l/min
350 l/min
500 l/min
600 l/min
Delivery rate 36% Nitrox
-
350 l/min
500 l/min
600 l/min
Delivery rate 40 % Nitrox
-
-
300 l/min
450 l/min
Membrane body
1 x oxygen module 1.0
1 x oxygen module 1.0
1 x oxygen module 2.0
1x oxygen module 2.0
Maximum pressure
13 bar
13 bar
13 bar
13 bar
Filter
3 stage
3 stage
3 stage
3 stage
Compresssor
AP 5
AP 7,5
AP 11
AP 15
Working pressure
7-10 bar
7-10 bar
7-10 bar
7-10 bar
Compresssor pressure
10 bar
10 bar
10 bar
10 bar
Compresssor principle
screw
screw
screw
screw
Weight (incl. extensions)
180 kg
230 kg
235 kg
400 kg
Measures (L x W x H)
490 x 470 x 680
670 x 850 x 840
670 x 850 x 840
820 x 900 x 1470
Dryer
separat
separat
separat
separat
Dew Point
< 6°C
< 6°C
< 6°C
< 6°C
Weight
43 kg
43 kg
43 kg
52 kg
Measures (L x W x H)
526 x 336 x 525
526 x 336 x 525
526 x 336 x 525
763 x 483 x 510
Special equipment construction is possible, for example diesel-operated or for safari boats.
5
NRC Light Series
With the NRC PG Light Series you can produce Nitrox blends with oxygen contents ranging from 28 % to 40 %. With this system you do not need a separate compressor; the plant is simply connected to a high pressure bank, which makes it more than ever suitable for application in areas with limited electrical power supply. The necessary space for putting in place is extremely reduced and permits thus installations on smallest areas. The plants are simple to handle, extremely uncomplicated to maintain and reliable in service.
Parts Package: The NRC PG Light membrane unit consists of the following parts: Input pressure reducer 200 bar, triple oilfree filters (with extra cartridges), oxygen membrane, and needle valve, high and low pressure relief valve, oxygen analyzer and backup memory for the original Nitrox blend. Function: As soon as the air of the high pressure bank flows through the membrane,
Advantages
6
you can read off the actual oxygen content of the gas mixture on the digital analyzer. The compressed air is separated inside the membrane into its components oxygen and nitrogen. By adjusting the needle valve, you can produce different mixtures between 28 % - 40 % oxygen. The redundant nitrogen is led over a valve out of the membrane. The produced Nitrox leaves the membrane with ambient pressure and is directed into the buffer memory.
Reduced need of space
Nitrox blends ranging from 28 % to 40 % oxygen
Can operate in high ambient temperatures
No oxygen needed
Easy handling
No separate compressor needed
Extremely easy servicing
No additional power consugmption
Failure safe
A high pressure compressor compresses the Nitrox and fills it up into the diving tanks. If a change of mixing proportion is needed, simply adjust the needle valve to the desired blend. By means of a lever valve it can be specified whether the high pressure com-pressor is supplied with ambient air or with the produced Nitrox. There is no wear of the oxygen membrane during use, which guarantees an extremely high life span. With the NRC PG Light Series, service is reduced
to a minimum and is basically limited to the replacement of the filter cartridges. The NRC PG Light Series can be upgraded at any time to the Professional Series, by retrofitting a low pressure compressor.
Pressure reducer 300 bar Professional Analyser
Options: Membrane Casing Compressed air reservoir
Picture shows optional compressed air reservoir Picture shows optional membrane casing
Performance
PG 400 Light
PG 600 Light
Performance 32 % O2 L/min* Performance 36 % O2 L/min* Performance 40 % O2 L/min*
400 l/min 400 l/min 450 l/min
600 l/min 600 l/min 650 l/min
Dimensions BxHxL in mm
150 x 1050 x 600
150 x 1050 x 600
Weight in kg
30
40
7
NRC Compressor AP 100
Breathing Air Compressor 100 l/min Max. Press.
Capacity
Type
bar
L/min
Cfm
KW
PS
AP 100 -E-225*
225
100
3,5
2,2
AP 100 -B-225
225
100
3,5
AP 100 -E-310*
310
100
3,5
AP 100 -B-310
310
100
3,5
* Special voltages/frequences
8
Drive Power
2,2
RPM
Stages
Filter
Filling Hoses
3
1200
3
P2
1
5,5
1200
3
P2
1
3
1200
3
P2
1
5,5
1200
3
P2
1
Standard Features: P21 Purifier w Refillable Purifier Cartridge 2nd and 3rd Stage Water Seperators Intercoolers (Stainless Steel) After Cooler (Stainless Steel) Priority Valve 1 Filling Hose (Yoke, Filling Valve, Pressure Gauge, DIN Adapter) Portable Manual Drain Air Quality comply with EN 12021
Prime mover
Dimensions
Weight
WxLxH
Kg
Electromotor 400 V / 3-Phasen / 50 Hz
89 x 40 x 48
58
Electromotor 230 V / 1-Phase / 50 Hz od. 60 Hz
89 x 40 x 48
58
Gasoline Honda
92 x 37 x 46
63
Optional Equipment: Automatic Start/Stop Auto Drain Diesel Engine Extra Filling Hose
9
NRC Compressor AP 170 to AP 320
Breathing Air Compressor 170 L/min to 320 L/min
10
Max. Press.
Capacity
Drive Power
RPM
Stages Filter
Filling Hoses
Type
bar
L/min
Cfm
KW
PS
AP 170-E-225
225
170
6
4
5,5
1300
3
P2
2
AP 170-B-225
225
170
6
6
1300
3
P2
2
AP 170-E-310
310
170
6
5,5
1300
3
P2
2
AP 170-B-310
310
170
6
6
1300
3
P2
2
AP 240-E-225
225
240
8,4
7,5
1500
3
P4
2
AP 240-B-225
225
240
8,4
AP 240-E-310
310
240
8,4
9
1500
3
P4
2
7,5
1500
3
P4
2
AP 240-B-310
310
240
8,4
9
1500
3
P4
2
AP 320-E-225
225
320
11
7,5
10
1700
3
P4
2
AP 320-E-310
310
320
11
7,5
10
1700
3
P4
2
4 5,5 5,5
Standard Features: P21 with refillable Purifer Element for FAD upto 170lt/min P41 Purifier(Stainless Steel) w Refillable Purifier Cartridge (Stainless Steel) for FAD higher than 170lt/min 2nd and 3rd Stage Water Seperators Intercoolers (Stainless Steel) After Cooler (Stainless Steel) Priority Valve Check Valve 2 Filling Hoses (Yokes, Filling Valves, Pressure Gauges DIN Adapters) Manual Drain Air Quality comply with EN 12021
Type
Prime Mover
Dimensions
Weight
WxLxH
Kg
AP 170-E
Electromotor 400V / 3-Phasen/50 Hz
125 x 54 x 70
133
AP 240-E
Electromotor 400V / 3-Phasen/50 Hz
125 x 54 x 70
133
AP 320-E
Electromotor 400V / 3-Phasen/50 Hz
125 x 54 x 70
133
AP 170-B
Gasoline Honda
125 x 54 x 70
137
AP 240-B
Gasoline Honda
125 x 54 x 70
137
Optional Equipment: Automatic Start/Stop Auto Drain Extra Filling Hose Dual Pressure System (225/310 Bar)
11
NRC Compressor AP 170S to AP 320S
Breathing Air Compressor 170 L/min to 320 L/min „ Silent“
12
Max. Press.
Capacity
Drive Power
RPM
Stages
Filter
Filling Hoses
Type
bar
L/min
Cfm
KW
PS
AP 170S-E-225
225
170
6
4
5,5
1300
3
P2
2
AP 170S-E-310
310
170
6
4
5,5
1300
3
P2
2
AP 240S-E-225
225
240
8,4
5,5
7,5
1500
3
P4
2
AP 240S-E-310
310
240
8,4
5,5
7,5
1500
3
P4
2
AP 320S-E-225
225
320
11
7,5
10
1700
3
P4
2
AP 320S-E-310
310
320
11
7,5
10
1700
3
P4
2
Standard Features: P41 Purifier(Stainless Steel) w Refillable Purifier Cartridge (Stainless Steel) 2nd and 3rd Stage Water Seperators Intercoolers (Stainless Steel) After Cooler (Stainless Steel) Priority Valve Check Valve Interlocked Filling Panel w2 Filling Hoses (Yokes, Filling Valves, DIN Adapters) Isolated Sound-Proof Canopy AutoDrain Automatic Start/Stop Oil Pressure Switch Control Panel: 3 Stage Pressure Gauges, Pressure Switchgaugean Oil Pressure Gauge Electric Panel: Y starter, Main Switch, On/Off Buttons, Hourmeter, Emergency Pushbuttons Air Quality comply with EN 12021
Type
Prime Mover
Dimensions
Weight
WxLxH
Kg
AP 170S-E
Electromotor 400V / 3-Phasen / 50 Hz
70 x 88 x 121
295
AP 240S-E
Electromotor 400V / 3-Phasen / 50 Hz
70 x 88 x 121
300
AP 320S-E
Electromotor 400V / 3-Phasen / 50 Hz
70 x 88 x 121
310
Optional Equipment: Extra Filling Hose Dual Pressure System (225/310 Bar) Electronic Control System
11 13
NRC Compressor AP 400S to AP 625S
Breathing Air Compressor 400 L/min to 625 L/min „ Silent“
14
Max. Press.
Capacity
Drive Power
RPM
Stages
Filter
Filling Hoses
Type
bar
L/min
Cfm
KW
PS
AP 400S-E-225
225
400
14
7,5
AP 400S-E-310
310
400
14
7,5
10
630
4
P61
4
10
630
4
P61
4
AP 560S-E-225
225
560
20
11
15
890
4
P61
4
AP 560S-E-310
310
560
20
11
15
890
4
P61
4
AP 625S-E-225
225
625
22
15
20
1000
4
P61
4
AP 625S-E-310
310
625
22
15
20
1000
4
P61
4
Standard Features: P61 Purifier(Stainless Steel) w Refillable Purifier Cartridge (Stainless Steel) High Pressure Particle and Oil Removal Filter (Srainless Steel) 2nd and 3rd Stage Water Seperators (Stainless Steel) Intercoolers (Stainless Steel) After Cooler (Stainless Steel) Priority Valve Check Valve Removable Filling Panel with 4 Filling Hoses (Yokes, Filling Valves) and Cylinder Pressure Gauge Canopy Isolated from Subbase for Smoothest Operation Auto drain Automatic Start/Stop Oil Level Switch Control Panel: 4 Stage Pressure Gauges, Main Switch, On/Off Buttons, Hourmeter, Test, Reset and Emergency Pushbuttons Electric Panel: Y starter Tropical Cooling with Double Fans Forced Ventilation Air Quality comply with EN 12021
Type
Prime Mover
Dimensions
Weight
WxLxH
Kg
AP 400S-E
Electromotor 400V / 3-Phasen / 50 Hz
77 x 132 x 161
667
AP 560S-E
Electromotor 400V / 3-Phasen / 50 Hz
77 x 132 x 161
694
AP 625S-E
Electromotor 400V / 3-Phasen / 50 Hz
77 x 132 x 161
715
Optional Equipment: Extra Filling Hose Dual Pressure System (225/310 Bar) Electronic Control System
15
NRC Nitrox System
Function
Low Pressure Supply
A complete NRC Nitrox System consists of a low pressure air supply with integrated air purification and also a Nitrox Membrane Unit with control units and regulation hardware.
The low pressure air supply, which, depending on the type of system you choose, consists of a low pressure compressor or an array of high pressure storage banks, this in turn supplies virtually oil-free air to the Nitrox Membrane Unit, with a pressure between 7-10 bar.
The heart of the Nitrox Unit is an oxygen membrane of the latest and most advanced design. This membrane is characterized by excellent performance which produces only the highest gas quality. The oxygen enriched air is produced by separating nitrogen and oxygen and enrichment can be obtained up to a maximum of 40 % oxygen (depending on the type of system) by the simple to use „Turnkey“ operation of an integrated needle valve. The accuracy is to 0.1 % of the displayed value.
Nitrox produced this way can then be supplied to a high pressure compressor, which compresses and the gas then fills it into diving tanks. Obviously the high pressure compressor can still be used to compress normal breathing air and can be switched over to Nitrox tanks by way of a directional control valve.
16
The low pressure compressors used in the NRC Nitrox System is one Air Pro Series. At NRC we consider that the supply of high quality, clea oil free air is paramount.
Air conditioning
In the refrigeration compressed air dryer warm moisture sturatet c air is cooled down to +3°C. The internal separator system separate densed water drops from the compressed air stream. Filter: Compressed Air is a valuable source of power. It is safe, flexibl in all areas of industry. Like any other energy source it benefits f clean and free from impurities.
Nitrox Membran The heart of each NRC Nitrox System is the Nitrox Membrane, an oxygen membrane of the latest and most advanced design. Depending on the type of system, different oxygen membranes can be utilized. All membrane types are characterized by extremely high air quality and supply performance. A special filter unit installed before the oxygen membrane guarantees virtually oil-free air and contributes thus to practically an unlimited life span. The Nitrox production of the various membrane units ranges from 200 to over 1500 liter/minute.
one of the NRC , clean, dry and
High Pressure Compressor
tet compressed arates the con-
exible and used fits form being
Virtually every existing high pressure compressor can be utilized in tandem with an NRC Nitrox Membrane System. Obviously the same compressor can still be used for compressing normal breathing air thanks to a change over switch, thus no additional high pressure compressor is needed for producing Nitrox.
17
NRC Pick O2 Analyser
With our oxygen analyser we can provide a handy measuring instrument with any advantages and precise measuring technology. In spite of the low overall size and an easy use this handy oxygen analyser has an an excellent oxygen sensor with an measuring exactness. The NRC oxygen analyser is equipped with an electro-chemical sensor and micro controller to measure oxygen concentrations of 0-99%. Designed
18
as an single-serving analyser with a life span of at least two years, it is a perfect oxygen analyser for daily use at Dive Centers. The usual exchange of the oxygen sensor is no longer necessary. Moreover, the price of an oxygen sensor with an average life span of one year is equale to the price of a new analyser with an operation period of approxiamately two years. Owing to the compact construction dimensions and the low weight the
NRC oxygen analyser is a perfect travel companion for ambitious scuba divers, who set value on quick and precise oxygen analysis. The analyser is constantly ready to function and indicates the value on a two-digit display.
Technical details NRC oxygen analyser accessories The NRC oxygen analyser is available with different extraction sets and can,
therefore, be connected to every Nitrox valve. An optional available BCD extraction set also allows a comfortable analysis via the inflator tube.
Oxygen analyser with BCD extraction set.
Oxygen analyser with tube extraction set.
NRC oxygen analyser specification The information refers to the following surrounding conditions: 1013 hPa, 25 degrees Celsius and dry ambient air.
Measuring principle: Display: Calibration: Resolution: Sample rate: Connector: Response Time: Accuracy: Temperature range: Storage area: Operation period: Weight: Dimensions:
Galvaic-oxygen-sensor 12,7 mm 1 Button, after pressing displayed value = 21 Vol.% O2 1 Vol.% O2 1 per second M 16 x 1 less than 2 second +/- 0,5 Vol. % O2 from 0 to 50% O2 0 - 50 degree Celsius perfect 5 to 25 degree Celsius, max. -5 to 60 degree Celsius approxiamately 2 years 80 g 74mmx48mmx59mm (HxWxD)
NRC oxygen calibration Calibration can easily be reached by pressing the button on the top of the case until „CA“ will appear in the display. The analyser adapts itself automatically to 21 Vol.% O2.
19
NRC O2 Professional Analyser
Professional Oxygen Analyser in an robust plastic case. All data’s are referring to 25°C, 50% relative humi dity and 1013hPa. The sensor D-13 is the exchange-sensor for this analyser.
Device Type: Sensor: Measurement Range: Accuracy: Display: Data Memory: Operating temperature: Batteries: Capacity of Battery: Power supply: Weight: Size:
20
SM 2000 D, P/N 45 00 29 SM 2000 I, P/N 45 00 28 Electro-chemical Oxygen Sensor 0 to 99,9 Vol. % O2 0,5 Vol. % ± 2% LCD Dot Matrix 128x64 Up to 50 000 data points 0 to 40°C Lithium Polymer 3,7V / 1,1Ah, rechargeable > 40h, if full loaded, no backlight on 5Volt , 700mA DC 300 gram incl. Sensor + Cable (SM 2000 D) 265 gram (SM 2000 I) 200 x 70 x 30 mm
NRC Helium Analyser
The Helium Analyser is a hand-held device for measuring helium content in a gas mixture, and is specifically designed to confirm the Helium content in a gas mixture similar to normal air or nitrogen. The Analyser is powered by rechargeable batteries. The LCD displays the helium content from 0 to 100 % with 0.1 % resolution. When the low battery indicator LED is on, the unit‘s battery needs to ne recharged prior to use. The patented sample unit allows the user to flow a gas mixture through the sensor inside the unit, as well as to seal the gas mixture in the sensor for measurement.
21
NRC Oxygen Sensors
High-quality oxygen sensors manufactured in Germany The number of oxygen analyser used in scuba diving has strongly risen during the last years. In many cases analyser used in scuba diving, were not developed for this particular purpose, but rather for the application in the industrial or medical field. Although these analyser work uncomplainingly in scuba diving, the first
22
problems appear, if the oxygen sensor has to be exchanged. Due to the bad availability and a high price the exchange of an oxygen sensor will be often uneconomical or even impossible. NRC offers for nearly all oxygen analyser located at the market exchange sensors, which distinguish itself by a high-class quality. The production in Germany guarantees a top quality and thus exact measuring results. As the
production of the sensors occur only with order, no storage times originate, what effects extreme positively on the life span of the oxygen sensor. Delivery can be made within 7 days. Every sensor will be tested individually and a test protocol will be issued, what can be seen any time if requested. All sensors will be delivered in an airtight box, what also allows a storage.
Measuring Instr. & Rebreather
NRC
Teledyne
Analytical Industries, Inc.
Dive Rite VTI Oxygen measuring Instr., MSA Mini-OX, Vandergraph VN202, Spectrum, CIS-Lunar
D-01 Unit No.: 223-0001
R-17MED R-17D
PSR-11-39-JD
Draeger Oxy-Gauge single cathode, Ohmeda Oxygen Analyzer
D-02 Unit No.: 223-0002
R-15
PSR-11-15-D
Analox OMS, UBS O2 Stick
D-03 Unit No.: 223-0003
R33D
PSR-11-37-D7
Uwatec Oxy2
D-04 Unit No.: 223-0004
R-22-D
PSR-11-39-MD2
Buddy Inspiration, Uwatec Oxy2, VR3, Oxy Spy, KISS, CCR-2000, Cochran Lifeguard, SUBMATIX Oxyscan 100 PRO, Megalodon
D-05 Unit No.: 223-0005
R-22D
PSR-11-39-MD
Draeger Oxy Gauge dual cathode, Draeger Oxydig
D-06 Unit No.: 223-0006
R-23
PSR-11-15-2D
Teledyne TED60
D-07 Unit No.: 223-0007
T-7
PSR-11-77D
Analox‘s Mini O2, Mini O2 D II, UBS, OBS
D-08 Unit No.: 223-0008
O-92
PSR-11-37-D03
Analox, OMS, UBS
D-09 Unit No.: 223-0009
R33D-1
PSR-11-37-D2
MK-16, Commercial Biomarine MK15/15-5, CCR-1000 rebreathers (Magnetic) (2), SM 1600
D-10 Unit No.: 223-0010
High Output Model #2 R10DS
PSR-11-33-NM1
Andi Alpha 1, SM 1600, CCR-1000
D-12 Unit No.: 223-0012
R22DHO
PSR-11-39-MD1
NRC Professional Oxygen Analyser
D-13 Unit No.: 223-0013
(the exchange-sensor for our NRC O2 Professional Analyser up to 2009 (green))
Submatix
N0R3 Unit No.: 223-0014
NRC Professional Oxygen Analyser
M-49 Unit No.: 223-0049
(the exchange-sensor for our NRC O2 Professional Analyser from 2010 (white))
D-01/Unit No.: 223-0001
D-02/Unit No.: 223-0002
D-03/Unit No.: 223-0003
D-04/Unit No.: 223-0004
D-05/Unit No.: 223-0005
D-06/Unit No.: 223-0006
D-07/Unit No.: 223-0007
D-08/Unit No.: 223-0008
D-09/Unit No.: 223-0009
D-10/Unit No.: 223-0010
D-12/Unit No.: 223-0012
D-13/Unit No.: 223-0013
D-13/Unit No.: 223-0014
D-13/Unit No.: 223-0049
23
NRC Accessories
The Nitrox neoprene tank covers for the identification of Nitrox tanks. The cover is simply pulled over the tank, with or without net. Complex handling with Nitrox stickers is not longer necessary. You can now change the outside identification on Nitrox or air tanks any time and very fast. Very durable finishing, available in two sizes, for 10l tanks or for 12l/15l tanks.
Nitrox tank tags are made from rewritable plastic. The following data can be registered on the tag: Date, O2 %, MOD (max. operation depth) and diver’s name. The tag has the size of a credit card and can be fastened to the tank neck.
24
25
ProNRC Nitrox Training Material
ProNRC is not to be considered simply a classical training organization, but rather a developer of modern and innovative training programs. Over the last 40 years the picture of recreational divers has been defined by diving with compressed air in combination with the so-called „open system“. Although it is technically as well as medically far outdated, still the majority of recreational divers use this combination. „Modern diving gases and diving devices“ offer big advantages concerning safety, comfort and performance to every diver and furthermore fun and pleasure.
Thus today there are hardly any diving centers/schools which do not offer Nitrox diving and/or Nitrox training to their guests. It won‘t be long and Nitrox will surely replace the normal compressed air a fact four years ago nobody really believed in. A large part of this development surely happened thanks to simplified training methods in addition to professional training materials. This is the chief strength of ProNRC: to create training materials which convey knowledge in a simple and comprehensible way.
Since long alternative breathing gases are not any more considered „exotic“ diving variants - a fact shown by their strong presence all over the world.
ProNRC Nitrox Workbook is our teaching book for Nitrox Diving. One of the goals of ProNRC is to create training materials with the newest educational insights to allow you to learn and teach as easily as possible. The knowledge we impart is at highest level! We are thankfull that we can offer our training material in several languages, because we had great help from well-known personages of the diving-scene. It is available in German, English, French, Italian, Spanish, Russian and Dutch.
ProNRC Nitrox Dive Table The ProNRC Nitrox Dive Table suitable to the ProNRC Nitrox Workbook.
26
ProNRC User PIC
ProNRC User Brevet
for the Nitrox User Certification.
comes in combination with the User PIC and is handed to the User. It is also available for Nitrox Instructors.
ProNRC Nitrox KIT includes the Nitrox Workbook, the Nitrox Dive Table and the User PIC
27
ProNRC Submatix Training Material
ProNRC Submatix CCR Workbook
ProNRC Submatix SCR Workbook
is our teaching material used for the Submatix CCR.
is our teaching material used for the Submatix SCR.
ProNRC Submatix CCR Dive Table
ProNRC Submatix SCR Dive Table
The Dive Table suitable to the ProNRC Submatix
The Dive Table suitable to the ProNRC Submatix
CCR Workbook
CCR Workbook
ProNRC Submatix KIT The Workbooks also come as a KITs including the Workbook, the Dive Table and the PIC.
28
ProNRC Discover Rebreather Diving
Workbook Dolphin & Dräger Ray
is used for the Submatix and the Dräger Dolphin discover course.
is used for the Dräger Ray and the Dräger Dolphin course.
ProNRC User Brevet and PIC combination Brevet with User PIC used for the User Certification. It is also available for Rebreather Instructors.
29
ProNRC Accessories
Tank Sticker
Sticker
Banner
Banner 30
Logo Sticker
Poster
Poster
Poster
ProNRC Crossover If you are already a Nitrox instructor from another organisation, then you just need to fill in an application form to become a ProNRC Nitrox instructor. You just need to mail us the form together with a photo and a copy of your previous Nitrox instructor card and within a few days we will give you an instructor number and access to the member area on our website. For your 79,- Euro annual fee you will get 2 complete Kits free of charge and a DVD with all the presentations, exams and answer keys on it. We also have free Pro NRC Nitrox flags for the dive centers.
31
Nitrox Network Egypt
Nitrox Network Maldives
School Street Beside Elektric Company Hurghada Red Sea | Egypt
H. Esjehivilla 4th floor Medhuziyaraiy Magu Male‘ | Rep. of Maldives
[email protected] [email protected]
[email protected] [email protected]
Phone 0020(0)653451270 Mobile 0020(0)191177993
Phone 009607684306
NRC International GmbH
ProNRC
Kölner Straße 159 51645 Gummersbach Tel.: 02261/500414
Sudetenstr. 21 64572 Büttelborn Tel.: 02261-500 416
[email protected] www.nrc-international.com Fax: 02261/500415
Nitrox Network
[email protected] www.pronrc.com Fax: 02261-42617
High Standard Best Quality
High Standard
High Standard Best Quality
Best Quality q
Made in Germany Professional