NIGHT-LITE PRO SERIES
NIGHT-LITE PRO PARTS MANUAL Serial Number 0294PRO02 and Up ALLMAND BROS. INC P.O. BOX 888 HOLDREGE, NE 68949
PHONE: 308/995-4495, 1-800/562-1373 ALLMAND FAX: 308/995-5887 ALLMAND PARTS FAX: 308/995-4883
NIGHT-LITE PRO SERIES * Use these codes to designate color needed:
SEPTEMBER 2001
01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
For Parts and Updates visit Allmand on the Web at www.allmand.com
NIGHT-LITE PRO SERIES SHO 1000 METALLIC VAPOR LAMP A-1A
19
15
21
NIGHT-LITE PRO SERIES SHO 1000 METALLIC VAPOR LAMP NO
REQ’D
PART NO
NS
610250
NS NS
610265 610255
NS
610253
NS NS
650144 610263
1 2 2A 3 4 5 6 7 8 9 NS 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 27A 28 29 30 31 32 33 34 35 36 37 38 39 40 41
1 1 1 2 2 8 8 1 2 1 1 1 1 1 2 1 2 4 2 1 2 2 4 2 2 1 1 1 1 1 1 1 1 1 1 1 2 1 2 1 2
610208 610211 610218 ** ** 041028 043017 610207 044013 610209 650250 610210 610212 610201 610213 610206 044037 047019 045142 680493 047016 044031 041035 610260 610235 044018 610234 610236 650159 310434 510007 610214 610215 610205 ** ** ** 610203 610217 044019 610202 045070 610017 044016
DESCRIPTION
A-1B LAMP HOLDER ASS’Y WITH YOKE AND LAMP (SOLID MT.) (REM. FIXTURES) LAMP HOLDER ASS’Y WITH YOKE AND LAMP (SOLID MT.) (HPS) LAMP HOLDER ASSEMBLY W/YOKE, LAMP AND CUSHIONS (CUSHION MT.) LAMP HOLDER ASSEMBLY W/YOKE, LAMP AND CUSHIONS (CUSHION MT.) (HPS) LAMP HOLDER ASSEMBLY WITH YOKE AND LAMP LAMP HOLDER ASSEMBLY WITH YOKE AND CUSHIONS, W/ HPS LAMP (CUSHION MOUNT) ALUMINUM RING LAMP BT-37 LAMP 1000W SHO ED37 (HPS) #8 WASHER (STAINLESS STEEL) #8-32 NC X 1/2 HEX HEAD BOLT (STAINLESS STEEL) #10-24 NC X 1/2 HEX HEAD BOLT (STAINLESS STEEL)15 #10 INTERNAL TOOTH WASHER ALUMINUM PLATE #8 -32 NC NYLON INSERT NUT (STAINLESS STEEL) LAMP TIP SUPPORT LAMP TIP SUPPORT (HIGH PRESSURE SODIUM) LAMP TIP SUPPORT TUBE CERAMIC SOCKET REFLECTOR END HOUSING GASKET RH SOLID END CASTING 3/8 - 24 NF NYLON INSERT NUT .75 OD x.385 ID x.20 NYLON WASHER 3/8 - 24 NF X 3/8 - 16 NC X 2" STUD SOLID MOUNT YOKE 3/8 SAE WASHER 5/16-18 KEPS NUT #10 - 24 NC X 1 1/4 ROUND HEAD BOLT RUBBER SHOCK MOUNT SHO 1000 SHO CUSHION MOUNT PLATE 10-24 NYLON LOCK NUT SHO 1000 CUSHION MOUNT YOKE SHO 1000 CUSHION MOUNT YOKE ASSEMBLY 16/3 PORTABLE CORD 66 LAMP CONNECTOR AND LEAD (REMOVEABLE FIXTURE ONLY) 1/2-CORD GRIP 1/2” ENTRANCE ELBOW 1/2 CONDUIT NIPPLE LH SOCKET END CASTING GREEN HEAT TEMP WIRE BLACK HEAT TEMP WIRE WHITE HEAT TEMP WIRE LENS LENS GASKET (SILICONE) #10-24 NYLON INSERT NUT (STAINLESS) LENS CHANNEL SET #10-24 NC SQ BD HOOK BOLT (W/VISOR) LEGEND: NS= Not Shown ** =Purchase locally SHO 1000 LIGHT VISOR (OPTIONAL #10-24 NC KEPS NUT * Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES MANUAL WINCH TOWER ASSEMBLY B-1A
NIGHT-LITE PRO SERIES MANUAL WINCH TOWER ASSEMBLY B-1B NO
REQ’D
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
1 2 2 3 1 1 8 1 2 3 8 8 14 8 1 1 1 2 1 1 1 1 1 1 1 1 3 3 3 1 1
19 20 21 22 23 24 25 26 27 28 29 30
PART NO 680102* 320110 620550 650110 352280 043100 310212 046242 046200 044048 046015 044023 047009 041023 680180* 352017* 620511 047030 047030 044053 650145 047025 610531 712032 046110 047010 044038 320410 320453
DESCRIPTION 4" MANUAL WINCH TOWER WELDMENT 3” PULLEY W/BUSHING 1/2 - 13 NC X 2 1/8 LOCKING KNOB .312 TOWER PAD PLASTIC TOWER PAD 5/8 INTERNAL TOOTH LOCK WASHER #8 CUSHION CLAMP 5/8 - 11 NC X 1 GRADE 5 BOLT 1/2 - 13 NC X 2 1/4 GRADE 5 BOLT 1/2 -13 NC NYLON INSERT NUT 1/4 - 20 NC X 1” GRADE 5 HEX BOLT 1/4 - 20 NC NYLON INSERT NUT 1/4” FLATWASHER STAINLESS STEEL #10 X 3/8 SELF-TAPPING PLASTIC SCREW 3" TOWER WELDMENT MANUAL WINCH 2-5/8" MANUAL TOWER WELDMENT FOR REM. LIGHT BAR WELDMENT, TOWER SUPPORT 5/8 FLAT WASHER (with painted tower) 5/8 FLAT WASHER (with galvanized tower) 5/8 - 11 NC NYLON INSERT NUT MAST LOCKING BAR 1/2” PLATED FLAT WASHER DLB 1200 BRAKE WINCH - PLATED 1/2” NUT (SUPPLIED WITH WINCH) WINCH SPRING (SUPPLIED WITH WINCH) HANDLE FOR DLB 1200 - 7" 3/8 - 16 NC X 1 GRADE 5 BOLT 5/16” FLAT WASHER 3/8 -16 NC NYLON INSERT NUT CORD REEL (OPTIONAL) 3/16” X 1-3/4” ROLL PIN
* Use these codes to designate color needed:
LEGEND: NS= Not Shown ** =Purchase locally
01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES MANUAL WINCH TOWER CABLE ROUTING B-2A
NIGHT-LITE PRO SERIES MANUAL WINCH TOWER CABLE ROUTING B-2B NO
REQ’D
1 2 3 4 5 6 7
2 1 1 1 1 1 1
PART NO
620084 045040 620076 650140 650133 320185 352016 650130*
DESCRIPTION
WIRE ROPE CLIP 3/16" WIRE ROPE THIMBLE, 1/4" STEEL CABLE 3/16- X 11' MAST WIRING - 14/7 X 324" (STRAIGHT CORD) STEEL CABLE 3/16” X 17’9" STEEL CABLE 3/16" X 10’ MAST WIRING - 16/8 X 344" (CORD REEL 4 LIGHT) MANUAL WINCH TOWER COMPLETE WITH LIGHT BAR ASSEMBLY
INSTRUCTIONS FOR REPLACING STEEL CABLES. 3/16" X 11' REMOVE THE CUSHION CLAMPS AND MAST WRING FROM 3" MAST SECTION. REMOVE THE WIRE ROPE CLIPS AT TOP END OF THE 4" MAST SECTION. REMOVE THE 3" PULLEY AT THE END OF THE 3" MAST SECTION. REMOVE THE 2 5/8" ROUND MAST SECTION. REMOVE ALL BROKEN AND FRAYED CABLE. REPLACE NEW CABLE THROUGH SLOT AND EYELET IN THE ROUND MAST SECTION. REPLACE 2 5/81' ROUND MAST SECTION IN THE 3" MAST SECTION. ROUTE CABLE THROUGH PULLEY BRACKETS AND INSTALL 3" PULLEY. WITH ALL SECTIONS PUSHED TOGETHER TIGHT, INSERT CABLE THROUGH HALF-LINK AND REINSTALL WIRE ROPE CLIPS. REINSTALL CUSHION CLAMPS AND MAST WIRING ON THE 3” MAST SECTION. 3/16" X 17’9" REMOVE MAST WRING FROM BALLAST COMPARTMENT (SEE ELECTRICAL SCHEMATIC) REMOVE THE CUSHION CLAMPS AND MAST WIRING FROM 4" MAST SECTION. REMOVE STOP BOLT AND WASHER. REMOVE 4 TOWER PADS AND 3" PULLEY AT THE END OF THE 4" MAST SECTION. REMOVE THE 2 5/8" ROUND AND 3" MAST SECTIONS TOGETHER. REMOVE ALL BROKEN AND FRAYED CABLE. REPLACE NEW CABLE THROUGH SLOT AND EYELET IN THE 3" MAST SECTION AND THROUGH PULLEY BRACKETS. REPLACE 2 5/8" ROUND AND 3" MAST SECTIONS. REPLACE 3" PULLEY AND 4" TOWER PADS. ATTACH CABLE TO WINCH AND WIND IN CLOCKWISE DIRECTION UNTIL ALL SLACK IS OUT. REPLACE STOP BOLT AND WASHER. REPLACE CUSHION CLAMPS AND MAST WIRING ON 4" MAST SECTION. REPLACE MAST WIRING IN BALLAST COMPARTMENT. (SEE ELECTRICAL SCHEMATIC) 3/16" X 10’ REMOVE ALL BROKEN AND FRAYED CABLE. FEED NEW CABLE THROUGH EYELET IN MAST PIVOT SECTION. FEED THROUGH PULLEY BRACKETS AND AROUND PULLEY IN FRONT UPRIGHTS. ATTACH CABLE TO WINCH AND WIND IN CLOCKWSE DIRECTION UNTIL ALL SLACK IS OUT.
LEGEND: NS= Not Shown ** =Purchase locally
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES ELECTRIC WINCH TOWER ASSEMBLY
B-3A
ELECTRIC WINCH MAST PIVOT SECTION ASSEMBLY
NIGHT-LITE PRO SERIES ELECTRIC WINCH TOWER ASSEMBLY NO
REQ’D
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
1 3 2 1 1 1 2 1 1 1 8 1 5 5 2 2 2 2 1 1 4 9 8 14 8 1 1 1 1
PART NO 680184* 320112 320110 620579 620577 620550 650110 352280 043100 046242 022022 090309 046200 044048 046110 044080 046105 043070 046438 712061 046010 044023 046015 047009 041023 680185* 352050* 320410* 320453
DESCRIPTION
B-3B
WELDMENT, 4” TOWER, ELECTRIC 2 1/2" PULLEY W/BUSHING 3" PULLEY LOCK SPRING LOCK HANDLE LOCKING KNOB 1/2 - 13 NC X 2 1/8” PLASTIC TOWER PAD, .312 PLASTIC TOWER PAD 5/16 SHORT 5/8 INTERNAL TOOTH LOCK WASHER 5/8 - 11 NC X 1 GRADE 5 BOLT #8 CUSHION CLAMP SPRING LATCH RELEASE DECAL 1/2 - 13 NC X 2 1/4 GRADE 5 BOLT 1/2 - 13 NC NYLON INSERT NUT 3/8 - 16 NC X 1 GRADE 5 BOLT 3/8 - 16 NC TOPLOCK NUT 3/8 - 16 NC X 3/4 GRADE 5 BOLT 3/8 INTERNAL TOOTH LOCK WASHER 1/4” X 3” QUICK RELEASE PIN STEEL LANYARD 1/4 - 20 NC X 3/4 GRADE 5 BOLT 1/4 - 20 NC NYLON INSERT NUT 1/4 - 20 NC X 1” GRADE 5 BOLT 1/4” SS FLAT WASHER #10 X 3/8 SELF TAPPING PLASTIC SCREW 3" ELECTRIC WINCH TOWER WELDMENT REMOVEABLE LIGHT BAR 2 5/8” ROUND TOWER WELDMENT CORD REEL (used on cord reel towers only) 3/16 X 1 3/4 ROLL PIN (used on cord reel towers only)
ELECTRIC WINCH MAST PIVOT SECTION ASSEMBLY NO 1 2 3 4 5 6 7
REQ’D 1 1 1 1 2 1 1
PART NO 620570* 620545 352168 620550 047055 047025 044048
DESCRIPTION TOWER SUPPORT WELDMENT, ELECTRIC WINCH 3/4 PLATED HAIRPIN CLIP MAST LOCKING BAR, ELECTRIC WINCH LOCKING KNOB 1/2 - 13 NC X 2 1/8” 1” NARROW RIM PLATED MACHINE BUSHING 1/2” PLATED FLAT WASHER 1/2 - 13 NC NYLON INSERT NUT * Use these codes to designate color needed:
LEGEND: NS= Not Shown ** =Purchase locally
01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES ELECTRIC WINCH STRAIGHT CORD TOWER CABLE ROUTING
B-4A
NIGHT-LITE PRO SERIES ELECTRIC WINCH STRAIGHT CORD TOWER CABLE ROUTING NO
REQ’D
PART NO
DESCRIPTION
1 2 3 4 5 NS
2 1 1 1 1
620084 045040 650438 320185 352054 650429*
WIRE ROPE CLIP 3/16" WIRE ROPE THIMBLE, 1/4" MAST WIRING - 14/7 X 324" (4-LIGHT)
NS
650343*
B-4B
STEEL CABLE 7/32" X 26' ELECTRIC WINCH, STRAIGHT CORD TOWER COMPLETE WITH 4-LIGHT LIGHT BAR ASSEMBLY ELECTRIC WINCH, STRAIGHT CORD TOWER COMPLETE WITHOUT LIGHT BAR ASSEMBLY
INSTRUCTIONS FOR REPLACING STEEL CABLES 3/16 X 10' REMOVE THE CUSHION CLAMPS AND MAST WIRING FROM 3" MAST SECTION. REMOVE LIGHT BAR BY REMOVING 4 NUTS ON BAR AND LAY BAR ON GROUND. REMOVE THE WIRE ROPE CLIPS AT TOP END OF THE 4" MAST SECTION. REMOVE THE 3" PULLEY AT THE END OF THE 3" MAST SECTION. REMOVE THE 2 5/8" ROUND MAST SECTION. REMOVE ALL BROKEN AND FRAYED CABLE. REPLACE NEW CABLE THROUGH SLOT AND EYELET IN THE ROUND MAST SECTION. REPLACE 2 5/8" ROUND MAST SECTION IN THE 3" MAST SECTION. ROUTE CABLE THROUGH PULLEY BRACKETS AND INSTALL 3" PULLEY. WITH ALL SECTIONS PUSHED TOGETHER TIGHT, INSERT CABLE THROUGH HALF-LINK AND REINSTALL WIRE ROPE CLIPS. REINSTALL CUSHION CLAMPS AND MAST WIRING ON THE 3" MAST SECTION. 7/32 X 26' REMOVE CABLE FROM WINCH. REMOVE MAST WIRING FROM BALLAST COMPARTMENT (SEE ELECTRICAL SCHEMATIC) REMOVE TOWER ASSEMBLY FROM TRAILER. REMOVE STOP BOLT AND WASHER. REMOVE 4 NYLON ROLLERS AND 3" PULLEY AT TOP END OF 3" SQUARE SECTION. REMOVE THE 2 5/8" ROUND AND 3" MAST SECTIONS TOGETHER. REMOVE 2 1/2" PULLEY FROM END OF 4" SECTION. REMOVE ALL BROKEN AND FRAYED CABLE. REPLACE NEW CABLE THROUGH SLOT AND EYELET IN THE 3" MAST SECTION AND THROUGH PULLEY BRACKETS. REPLACE 2 5/8" ROUND AND 3" MAST SECTIONS. REPLACE 3" PULLEY AND 4 NYLON ROLLERS. REPLACE STOP BOLT AND WASHER. RUN NEW CABLE ON OUTSIDE OF 4" SECTION. REPLACE 2 1/2" PULLEY. REPLACE TOWER ASSEMBLY ON TRAILER. REPLACE MAST WIRING IN BALLAST COMPARTMENT. (SEE ELECTRICAL SCHEMATIC) RUN NEW CABLE THROUGH PULLEY BRACKETS IN FRONT OF TRAILER. ATTACH CABLE TO ELECTRIC WINCH. WIND IN CLOCKWISE DIRECTION UNTIL ALL SLACK IS OUT.
* Use these codes to designate color needed:
LEGEND: NS= Not Shown ** = Purchase locally
01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES 4-LIGHT REMOVABLE LIGHT BAR ASSEMBLY B-5A
11
NIGHT-LITE PRO SERIES 4-LIGHT REMOVABLE LIGHT BAR ASSEMBLY B-5B
NO 1 2 3 4 5 6 7 7A 8 9 10 11
REQ’D PART NO 10 4 8 1 1 10 1 1 4 1 4 NS 1 1
352042* ** ** ** 620537* 650319* ** 310033 022039 ** 711029 310414 022020 620514* 352050*
DESCRIPTION LIGHT BAR ASSEMBLY, 4-LIGHT 1/4 - 20 NC X 1/2 CARRIAGE BOLT 3/4 - 10 NC NYLON INSERT NUT 3/4 FLAT WASHER LIGHT BAR COVER PLATE LIGHT BAR FRAME ONLY 1/4 - 20 NC KEPS NUT CORD GRIP NUT - METAL 1/2" BUSHING 5/16 - 18 NC KEPS NUT LOCKING HOLE PLUG LAMP CONNECTOR, FEMALE 3/8” 2 SCREW ROMEX CLAMP 2 5/8 ROUND TOWER SECTION (Manual removeable light bar) 2 5/8 ROUND TOWER SECTION (Electric removeable light bar)
LEGEND: NS = Not Shown ** =Purchase locally
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-1A
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-1B
NO
REQ’D
2
1 1 1 1 1 2 2 2 10 10 2 1 1 10 1 1 1 1 2 1 2
3 4 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 NS NS NS NS
PART NO
650235 680558 680879 330013 330014 049040 650297 712116* 047010 044031 650387* 650100 032026 046050 024002 713098 027025 027025 044031 340017 433507 330012A 650169 712111B 712111 330009 650236
DESCRIPTION
SIDE CRANK JACK, SNAP RING (SHOWN) SIDE CRANK JACK, TUBE MOUNT (NOT SHOWN) TOP CRANK JACK, TUBE MOUNT (NOT SHOWN) JACK LOCK PIN (USE WITH 680558 and 680879) JACK SNAP RING 2 5/16 XT (USE WITH 650235) SAFETY CHAIN SET FENDER, MOLDED BLACK SPOKE WHEEL 5/16 FLAT WASHER 5/16 - 16 NC KEPS NUT SPOKE WHEEL AND 13" TIRE AXLE ASSEMBLY AXLE MOUNTING HARDWARE KIT 5/16 - 18 NC X 1 CARRIAGE BOLT 12 VOLT BATTERY NEGATIVE BATTERY CABLE - 36" NEGATIVE BATTERY CABLE - 48" (PERKINS) POSITIVE BATTERY CABLE - 48" 5/16 -18 NC NYLON INSERT NUT NYLON BATTERY HOLD DOWN J-BOLT 5/16 X 11 “ JACK HOLE PIN KIT COUPLING KIT BEARING SET AXLE HUB (INCLUDES RACES AND BEARING SET) JACK MOUNTING BRACKET WITH SNAP RING PLASTIC JACK CAP
LEGEND: NS= Not Shown ** =Purchase locally
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-1C
13 12
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-1D
NO 1
2 3 4 5 6A 7 8 9 10 11 12 13 NS
REQ’D
PART NO
1 1 1 1 1 2 2 2 2 1
650235 680558 680879 330013 330014 046250 046160 049040 044061 712540-20
2 1 2 4 2 2
046220 712021 044062 047015 044043 712552 650398-20 651225-20
DESCRIPTION SIDE CRANK JACK, SNAP RING (SHOWN) SIDE CRANK JACK, TUBE MOUNT (NOT SHOWN) TOP CRANK JACK, TUBE MOUNT (NOT SHOWN) JACK LOCK PIN (USE WITH 680558 and 680879) JACK SNAP RING 2 5/16 XT (USE WITH 650235) 5/8 -11 NC X 4 1/2 GRADE 5 BOLT 7/16 -14 NC X 1 1/2 GRADE 5 BOLT SAFETY CHAIN WITH S HOOK AND KEEPER 5/8 -11 NC TOPLOCK NUT HITCH CHANNEL WITH PINTLE (After Nov. 1, 2004 S/N 0273PRO05 Cast Galvanized) 1/2 -13 INC X 4 GRADE 5 BOLT BALL COUPLER ONLY 1/2 -13 NC TOPLOCK NUT 3/8 FLAT WASHER 7/16 -14 NC NYLON LOCK NUT HITCH PLATE REMOVEABLE TONGUE/SNAP RING REMOVEABLE TONGUE/TUBE MOUNT (After Sept. 25, 2006 S/N 2310PRO006)
LEGEND: NS= Not Shown ** =Purchase locally
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-2A
ISUZU 3LB1
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-2B
ISUZU 3LB1
NO
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
REQ’D
2 2 2 2 8 4 2 4 12 1 1 2 4 1 1 1 1 4 1 6 4 4 1 1
PART NO
330012 330010 330014 650115* 047009 044023 041075 044036 047010 @@ ** 650129 046110 650112* 045145 330450 650210* 046010 330012A 045110 044033 046050 650722 650723
DESCRIPTION
REPLACEMENT HANDLE LONG JACK JACK SNAP RING 2 5/16 XT OUTRIGGER (LEFT AND RIGHT) 1/4FLATWASHER STAINLESS STEEL 1/4-20 NC NYLON INSERT NUT 5/16-18 NC X 3/4 SELF-TAPPING SCREW 3/8-16 NC KEPS NUT 5/16 FLAT WASHER RADIATOR RADIATOR CAP TAIL LIGHT 5/16-18 NC X 1 GRADE 5 BOLT REAR TOWER SUPPORT 1/4 X 1 1/2 ROLL PIN REAR TOWER SUPPORT PIN REAR PANEL, ISUZU 1” R 1/4-20 NC X 3/4 STAINLESS STEEL BOLTS REPLACEMENT JACK HOLE PIN KIT 3/16 ALUMINUM RIVET 5/16 - 18 NC NYLON INSERT NUT 5/16 - 18 X 1 GRADE 5 BOLT LEFT OUTRIGGER RETENTION PIN RIGHT OUTRIGGER RETENTION PIN
LEGEND: NS= Not Shown ** = Purchase locally @@ = Contact local Isuzu Dealer
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-2C
KUBOTA D905-BG
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-2D
KUBOTA D905-BG
NO
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
REQ’D
2 2 2 2 1 8 4 2 4 14 1 1 2 4 1 1 1 1 4 1 2 6 4 4 1 1
PART NO
330012 330010 330014 650115* 920472 047009 044023 041075 044036 047010 Call Factory ** 650129 046110 650112* 045145 330450 650283* 046010 330012A ** 045110 044033 046050 650722 650723
DESCRIPTION
REPLACEMENT HANDLE LONG JACK JACK SNAP RING 2 5/16 XT OUTRIGGER (LEFT AND RIGHT) COOLANT OVERFLOW TANK ¼” FLATWASHER 1/4-20 NC NYLON INSERT NUT 5/16-18 NC X 3/4 SELF-TAPPING SCREW 3/18-16 NC KEPS NUT 5/16 FLAT WASHER RADIATOR RADIATOR CAP TAIL LIGHT 3/8 - 16 NC X 1 GRADE 5 BOLT REAR TOWER SUPPORT 1/4 X 1 1/2 ROLL PIN REAR TOWER SUPPORT PIN REAR PANEL, 1 “ R 1/4-20 NC X 3/4 GRADE 5 HEX BOLT STAINLESS STEEL REPLACEMENT JACK HOLE PIN CABLE TIE 3/16 ALUMINUM RIVET 5/16 -18 NC NYLON INSERT NUT 5/16-18 X 1 GRADE 5 BOLT LEFT OUTRIGGER RETENTION PIN RIGHT OUTRIGGER RETENTION PIN
LEGEND: NS= Not Shown ** =Purchase locally * Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-2E
PERKINS 103.10/LOMBARDINI LDW 903
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES PERKINS 103.10/LOMBARDINI LDW 903
NO
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
REQ’D
2 2 2 8 4 2 10 2 1 1 1 1 1 4 1 6 4 4 1 1
PART NO
330012 330010 330014 650115* 047009 044023 041075 047010 650129 650112* 045145 330450 650283* 650767* 046010 330012A 045110 044033 046050 650722 650723
C-2F
DESCRIPTION
REPLACEMENT HANDLE LONG JACK JACK SNAP RING 2 5/16 XT OUTRIGGER (LEFT AND RIGHT) ¼” FLAT WASHER 1/4-20 NC NYLON INSERT NUT 5/16-18 NC X 3/4 SELF-TAPPING SCREW 5/16 FLAT WASHER TAIL LIGHT REAR TOWER SUPPORT 1/4 X 1 1/2 ROLL PIN REAR TOWER SUPPORT PIN REAR PANEL, 1 “ R PERKINS/CAT REAR PANEL, 1 “ R LOMBARDINI 1/4-20 NC X 3/4 GRADE 5 HEX BOLT STAINLESS STEEL REPLACEMENT JACK HOLE PIN KIT 3/16 ALUMINUM RIVET 5/16 -18 NC NYLON INSERT NUT 5/16 - 18 X 1 GRADE 5 BOLT LEFT OUTRIGGER RETENTION PIN RIGHT OUTRIGGER RETENTION PIN
LEGEND: NS= Not Shown ** =Purchase locally
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-2G
REAR PANEL WITH TOWER LIMIT SWITCH CABLE ELECTRIC ONLY
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES REAR PANEL WITH TOWER LIMIT SWITCH CABLE ELECTRIC ONLY
NO
REQ’D
PART NO
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
1 1 1 1 1 1 1 1 3 1 1 1 2 2 1 4 2 1 2 1 1 2 2 2 1
650435 650432 022136 650434-15 330450 045145 022020 650112* 022016A 022016 650433* 046040 041006 046110 046050 047010 044036 044033 044023 046015 047009 041017 044004 044004 041050
26
2
043050
C-2H
DESCRIPTION REAR LIMIT SWITCH REAR LIMIT SWITCH WIRING HARNESS 5/8 SNAP BUSHING LIMIT SWITCH ACTUATOR CAM REAR TOWER SUPPORT PIN 1/4 X 1 1/2 ROLL PIN 2-SCREW ROMEX CLAMP, 3/8 REAR TOWER SUPPORT 3/8 CUSHION CLAMP (BOLT HOLE 3/8) 3/8 CUSHION CLAMP (BOLT HOLE 1/4) REAR LIMIT SWITCH COVER 1/4 - 20 NC X 5 GRADE 5 BOLT #6 - 32 X 1 1/4 BOLT 3/8 - 16 NC X 1 1/4 GRADE 5 BOLT 5/16 - 18 NC X 1 GRADE 5 BOLT 5/16 FLAT WASHER 3/8- 16 NC KEPS NUT 5/16 -18 NC NYLON INSERT NUT ¼ -20 NC NYLON INSERT NUT ¼ -20 NC X 1 GRADE 5 BOLT 1/4 STAINLESS STEEL FLAT WASHER #6 - 32 NC X 3/8 BOLT #6 - 32 NC KEPS NUT #6 - 32 NC KEPS NUT 1/4 - 20 NC X 3/4 PHILLIPS HEAD TRUSS HEAD SCREW (STAINLESS STEEL) 1/4 INTERNAL TOOTH LOCK
LEGEND: NS= Not Shown ** =Purchase locally
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-2I
ISUZU 3LB1
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-2J
ISUZU 3LB1
NO
1 2 3 4 5 6 7 8 9 10 11
REQ’D
PART NO
1 1 1 1 4 4 4 4 4 4 4
650267* 650268* @@ @@ 046050 047010 044031 042082 042030 ** **
DESCRIPTION
ISUZU RADIATOR SUPPORT SHROUD (RIGHT) ISUZU RADIATOR SUPPORT SHROUD (RIGHT) ISUZU RADIATOR WITH SHROUD ISUZU RADIATOR FAN GUARD 5/16 - 18 NC X 1 GRADE 5 BOLT 5/16 FLAT WASHER 5/16 - 18 NC KEPS NUT M8 HEXNUT M8 X 20 GRADE 8.8 BOLT M8 FLAT WASHER M8 SPLIT LOCK WASHER
LEGEND: NS= Not Shown ** =Purchase locally @@ =Contact local Isuzu Dealer
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-2K
KUBOTA D905-BG
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-2L
KUBOTA D905-BG
NO
REQ’D
1 2 3
1 7 1
PART NO
650168 041015 Call Factory
DESCRIPTION
KUBOTA FAN GUARD #8 X 5/8 HW TEKS SCREW RADIATOR
* Use these codes to designate color needed:
LEGEND: NS= Not Shown ** =Purchase locally
01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-3A
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-3B NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
REQ’D 18 32 1 12 1 8 4 2 16 1 6 1 1 1 1 4 2 4 1 1 1 1 2 2 2 1 1 1
PART NO 046010 047009 650206* 044023 650207* 045216 046110 046115 047010 650111* 044036 650113* 650266* 650277* 650565* 044033 046010 046050 650112* 650210* 650283* 650767* 041021 330481 044016 340058 640555(NS) 330037
DESCRIPTION 1/4 - 20 NC X 3/4 GRADE 5 HEX BOLT STAINLESS STEEL 1/4 STAINLESS STEEL FLAT WASHER RIGHT SIDE FRONT PANEL, 1" R 1/4 - 20 NC NYLON INSERT NUT LEFT SIDE FRONT PANEL, 1" R TINNERMAN FASTENER 3/8 -16 NC X 1 GRADE 5 BOLT 3/8 - 16 NC X 1 1/4 GRADE 5 BOLT 5/16 FLAT WASHER TOWER PIVOT 3/8 - 16 NC KEPS NUT TOWER/ROOF BRACE ROOF PANEL, ISUZU/PERKINS 1” R ROOF PANEL, KUBOTA 1" R W/BOX MUFFLER ROOF PANEL, LOMBARDINI/DEUTZ 1” R 5/16-18 NC NYLON INSERT NUT 1/4-20 NC X 1 GRADE 5 BOLT 5/16-18 NC X 1 GRADE 5 BOLT REAR TOWER SUPPORT REAR PANEL, ISUZU 1 “R REAR PANEL, KUBOTA/PERKINS 1" R REAR PANEL, LOMBARDINI 1" R #10 - 24 NC X 1/2 SCREW GROUND ROD CLIP #10 - 24 NC KEPS NUT GROUND ROD BLACK PLUG - 2.0" (PERKINS) 3" STICK-ON RED REFLECTOR CAL. SPEC.
LEGEND: NS= Not Shown ** =Purchase locally
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-4A
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES NO 1 2 3 4 5 6 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 NS
REQ’D
PART NO
2 4 2 16 2 4 20 2 2 4
660170 041026 650131 041021 650209* 041027 044019 650211 650425 041050
1 1 1 8 4 1 1 1 2 1 1 1 1 4 16 1 1
650266* 650277* 650565* 044023 041250 650210* 650283* 650767* 650132 022035 310033 650206* 650207* 044016 045110 640555 (NS) 650376
C-4B
DESCRIPTION POSITIVE DOOR HOLDER #10 - 24 NC X 3/4 FLAT HEAD SCREW LOCKING T-HANDLE #10 - 24 NC X 1/2 ROUND HEAD SCREW DOOR 1" R, RIGHT AND LEFT #10 - 24 NC X 3/4 ROUND HEAD SCREW #10 - 24 NC NYLON INSERT NUT DOOR HINGE 1" R DOOR HINGE (UNIVERSAL) 1/4 - 20 NC X 3/4 PHILLIPS HEAD TRUSS HEAD SCREW (STAINLESS STEEL) ROOF PANEL. ISUZU/PERKINS 1" R ROOF PANEL, KUBOTA 1" R W/BOX MUFFLER ROOF PANEL, LOMBARDINI/DEUTZ 1” R 1/4 - 20 NC NYLON INSERT NUT 1/4-20 x 1/2 SLOTTED HEAD NYLON BINDER SCREW REAR PANEL, ISUZU 1" R REAR PANEL, KUBOTA/PERKINS 1" R REAR PANEL, LOMBARDINI 1" R LATCH CAM, W/SQ HD SET SCREW CORD GRIP NUT CORD GRIP RIGHT SIDE FRONT PANEL, 1" R LEFT SIDE FRONT PANEL, 1" R #10 - 24 NC KEPS NUT 3/16 STEEL RIVETS BLACK PLUG - 2.0” (PERKINS) NL PRO SOUND ATTENUATION KIT
LEGEND: NS= Not Shown ** =Purchase locally
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-5A
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-5B
NO 1 2 3 4 NS 5 6 NS 7 8 9 10 11 NS 12 13 14 15 16 NS 17 18 NS 19 NS 20
REQ’D 1 2 4 2 2 2 4 4 16 1 2 1 2 4 3 1 4 1 1 1 1 3 1 1
PART NO 022025 046036 310391 610570* 650443* 044023 310124 310118 041070 043050 ** 045003 650104 330458 044021 330494 041017 650105 630132A 330432 022036 433329 330459 064035 330490 330458
DESCRIPTION 3/4 2-SCREW CORD CLAMP 1/4 - 20 NC X 2 1/2 GRADE 5 BOLT 28 uFCAPACITOR DUAL CAPACITOR MOUNTING CLAMP DUAL CAPACITOR MOUNTING CLAMP (HPS) 1/4 - 20 NC NYLON INSERT NUT TRANSFORMER ONLY TRANSFORMER, CAPACITOR, AND STARTER (HPS) 1/4 - 20 NC SELF-TAPPING SCREW 1/4 INTERNAL TOOTH LOCK WASHER #6 - 32 NC X 3/4 ROUND HEAD SCREW ¼ - 20 NC X 1 1/2 STUD 25 AMP BREAKER SWITCH 15 AMP BREAKER SWITCH (OPTIONAL) 1/4 - 20 NC KEPS NUT 1/4 - 20 NC WING NUT #6 - 32 NC X 3/8 ROUND HEAD SCREW 15 AMP POP-OUT CIRCUIT BREAKER 120V. GFCI RECEPTACLE RECEPTACLE COVER FOR GFCI RECEPTACLE 3/4" STEEL LOCKNUT 5/8 CAP PLUG C.B. SWITCH, 15 AMP DP 1 1/2 X 7 GA. CAP PLUG RECEPTACLE 240V. 15A 15 AMP BREAKER SWITCH (CABLE ELECTRIC ONLY)
LEGEND: NS= Not Shown ** =Purchase locally
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-5C
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-5D
NO
REQ’D
PART NO
1 2 3 4 5 6 7 8 9
15 7 11 1 7 6 1 4 4
044016 044014 043015 310120 043015 041030 041035 022185 041045
DESCRIPTION
#10 - 24 NC KEPS NUT #10 - 24 NC BRASS HEX NUT #10 INTERNAL TOOTH LOCK WASHER BALLAST TERMINAL BOARD #10 EXTERNAL TOOTH LOCK WASHER #10 - 24 NC X 1 MACHINE SCREW #10 - 24 NC X 1 1/4 MACHINE SCREW NYLON SPACER #10 - 24 NC X 2 1/2 MACHINE SCREW
LEGEND: NS= Not Shown ** =Purchase locally
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES GAUGE PANEL MANUAL WINCH C-6A
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-6B
GAUGE PANEL MANUAL WINCH
NO
REQ’D
PART NO
1
1 1 1 1 1 1 1 1 3 1 1 1 1 1 6 2 2 1 1 1 1 2 1
920474 650219 922005 ** @@@ @@ @@@@ 340014 041078 650125* 650196* 650282* @@@ @@@@ 044021 043050 043010 920475 922004 @@@@ 310212 041070 650363*
2 3 4 5 6 NS 7 8 9 10 11 12 13
DESCRIPTION
IGNITION KEY (EXTRA) IGNITION KEY (ISUZU) PAIR ROUND TYPE IGNITION KEY (ISUZU) PAIR BLADE TYPE IGNITION KEY (PERKINS) GLOW PLUG LAMP GLOW PLUG LAMP (ISUZU) GLOW PLUG LAMP (PERKINS) HOUR METER 1/4 - 20 NC X 1/2 ROUND HEAD SCREW INSTRUMENT PANEL INSTRUMENT PANEL (ISUZU) INSTRUMENT PANEL (PERKINS) GLOW LAMP TIMER REGULATOR (PERKINS) 1/4 - 20 NC KEPS NUT 1/4 INTERNAL TOOTH LOCK WASHER 1/4 - 20 NC X 3/4 GRADE 5 BOLT KEY SWITCH W/2 KEYS KEY SWITCH W/2 KEYS (ISUZU) BLADE TYPE KEY SWITCH W/2 KEYS (PERKINS) 5/8 CUSHION CLAMP 1/4 - 20 NC SELF-TAPPING SCREW GAUGE PANEL COVER
LEGEND: NS= Not Shown ** = Purchase locally @@@ = See Kubota Dealer @@ = See Isuzu Dealer @@@@ = See Perkins Dealer
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES GAUGE PANEL ELECTRIC WINCH C-6C
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES GAUGE PANEL ELECTRIC WINCH
NO
REQ’D
PART NO
1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 5 2 2 1 1 1 1 2 1 1 1 1 1
920474 650219 922005 ** @@@ @@ @@@@ 340014 310544 352466 650125* 650196* 650282* @@@ @@@@ 041078 044021 043050 046010 920475 922004 @@@@ 310212 041070 650363* 630157A ** 044016 022020
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
C-6D
DESCRIPTION IGNITION KEY (EXTRA) IGNITION KEY (ISUZU) PAIR ROUND TYPE IGNITION KEY (ISUZU) PAIR BLADE TYPE IGNITION KEY (PERKINS) GLOW PLUG LAMP GLOW PLUG LAMP (ISUZU) GLOW PLUG LAMP (PERKINS) HOUR METER DPDT MOMENTARY CONTACT SWITCH 2 AMP CIRCUIT BREAKER INSTRUMENT PANEL (KUBOTA) INSTRUMENT PANEL (ISUZU) INSTRUMENT PANEL (PERKINS) GLOW LAMP TIMER REGULATOR (PERKINS) 1/4 - 20 NC X 1/2 ROUND HEAD SCREW 1/4 - 20 NC KEPS NUT 1/4 INTERNAL TOOTH LOCK WASHER 1/4 - 20 NC X 3/4 GRADE 5 HEX BOLT STAINLESS STEEL KEY SWITCH W/2 KEYS KEY SWITCH W/2 KEYS (ISUZU) BLADE TYPE KEY SWITCH W/2 KEYS (PERKINS) 5/8 CUSHION CLAMP 1/4 - 20 NC SELF-TAPPING SCREW GAUGE PANEL COVER BRIDGE ASSEMBLY #10 - 24 NC X 3/4 ROUND HEAD SCREW #10 - 24 NC KEPS NUT 2 - SCREW ROMEX CLAMP, 3/8
LEGEND: NS= Not Shown ** = Purchase locally @@@ = See Kubota Dealer @@ = See Isuzu Dealer @@@@ = See Perkins Dealer
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES GAUGE PANEL, LOMBARDINI C-6E
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-6F
GAUGE PANEL, LOMBARDINI
NO
REQ’D
1 2 3 4 5 6 7 8
4 1 1 2 2 4 1 1
PART NO 041070 @@@@@ 340014 ** 043017 044021 650761 020021
DESCRIPTION 1/4 - 20 X 3/4 SELF-TAPPING SCREW LOMBARDINI CONTROL BOX HOUR METER M5 X .80mm x 12mm MACHINE SCREW #10 INTERNAL TOOTH LOCK WASHER 1/4 - 20 NC KEPS NUT LOMBARDINI CONTROL PANEL BRACKET #10 CUSHION CLAMP
LEGEND: NS= Not Shown ** = Purchase locally @@@@@ = See Lombardini Dealer * Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES PERKINS CONTROL PANEL C-6G
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-6H
PERKINS CONTROL PANEL
NO 3 4 5 7 8 9 10 11 12 13 14 15 16 17 NS
REQ’D 1 8 1 3 1 1 1 1 2 1 2 1 2 1 1
PART NO 921433 044021 650446 041078 340014 650282* 650307 650363* 041070 310212 046010 650306 043050 650302 650139
DESCRIPTION GLOW PLUG LAMP 1/4 - 20 NC KEPS NUT REGULATOR 1/4 - 20 NC X 1/2 ROUND HEAD SCREW HOUR METER INSTRUMENT PANEL, PERKINS KEY IGNITION KEY, EXTRA GAUGE PANEL COVER 1/4 - 20 NC SELF-TAPPING SCREW 5/8 CUSHION CLAMP 1/4 - 20 NC X 3/4 GRADE 5 HEX BOLT KEY SWITCH W/2 KEYS (PERKINS) 1/4 INTERNAL TOOTH LOCK WASHER AUTO SHUTDOWN TIMER 30 AMP CIRCUIT BREAKER
LEGEND: NS= Not Shown ** = Purchase locally @@@@ = See Perkins Dealer * Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-7A
FUEL TANK AND MANUAL WINCH
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-7B
FUEL TANK AND MANUAL WINCH
NO
REQ’D
PART NO
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
1 1 2 2 1 1 1 1 3 2 4 2 1 1 1 1 6 6 6 1 2 2 2 1 2 2 1 1 1
340027 650108 650108 044023 650470 650469 660144 650106 044021 041050 047010 044031 610531 046200 320112 044048 047007 043050 046005 630555* 046110 044036 046050 650621 045118 047100 047009 046010 650136
DESCRIPTION
FUEL FILLER CAP POLY FUEL TANK 30 GALLON 1/4 - 20 NC X 1-3/4 GRADE 5 HEX BOLT 1/4 - 20 NC NYLON INSERT NUT WINCH HANDLE WINCH EXTENSION TUBE WINCH DRIVE HUB NYLON WINCH GUIDE 1/4 - 20 NC KEPS NUT 1/4 - 20 NC X 3/4 TRUSS HEAD PHILLIPS SCREW 5/16 FLAT WASHER 5/16 - 18 NC KEPS NUT WINCH, PLATED 1/2 - 13 NC X 2 1/4 GRADE 5 BOLT 2-1/2 PULLEY W/BUSHING 1/2 -13 NC NYLON INSERT NUT 1/4-1 1/4 FENDER WASHER 1/4 INTERNAL TOOTH LOCK WASHER 1/4 - 20 NC X 1/2 GRADE 5 HEX BOLT KICK-OUT SPRING 3/8 - 16 NC X 1 GRADE 5 BOLT 3/8 - 16 NC KEPS NUT 5/16 -18 NC X 1 GRADE 5 BOLT KICKOUT SPRING PAD 1/4” RIVET 5/16 FLAT WASHER (STAINLESS) 1/4 SAE FLAT WASHER (STAINLESS) 1/4 - 20 NC X 3/4 GRADE 5 HEX BOLT WINCH HANDLE KIT (INCLUDES #5, 6, &7)
LEGEND: NS= Not Shown ** = Purchase locally * Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-7C
FUEL TANK AND ELECTRIC WINCH
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES FUEL TANK AND ELECTRIC WINCH
NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 16 17 17A 18 19 20 21 22 23 23 NS NS
REQ’D 5 5 1 1 1 2 1 1 1 2 1 5 1 2 2 1 1 6 6 6 1 1 4 6 1 1
PART NO 046110 047010 352089* 340027 650108 047010 046200 044048 320112 044021 352056* 044036 466093 041006 044006 630157 047007 046005 043050 650431* 022019 041075 044023 081016 081005
C-7D
DESCRIPTION 3/8 - 16 NC X 1 GRADE 5 BOLT 5/16 FLAT WASHER KICK-OUT SPRING FUEL FILLER CAP POLY FUEL TANK 1/4 20 NC X 1/2 CARRIAGE BOLT 1/2 - 13 NC X 2 1/4 GRADE 5 BOLT 1/2 - 13 NC NYLON INSERT NUT 2 1/2 PULLEY W/BUSHING 1/4 - 20 NC KEPS NUT SLACK LIMIT SWITCH BRACKET 3/8 - 16 NC KEPS NUT SLACK LIMIT SWITCH #6 - 32 NC X 1 1/4 ROUND HEAD SCREW #6 - 32 NC KEPS NUT STRONG ARM ELECTRIC WINCH EMERGENCY WINCH HANDLE 1/4 X 1 1/4 FENDER WASHER 1/4 - 20 NC X 1/2 GRADE 5 BOLT 1/4 INTERNAL TOOTH LOCK WASHER ELECTRIC WINCH COVER CUSHIONED CLAMP 7/8 5/16 - 18 NC SELF-TAPPING SCREW 1/4 - 20 NC NYLON INSERT NUT 1/4 FUEL HOSE 48” NYLON RETURN FUEL HOSE, 36”
LEGEND: NS= Not Shown ** = Purchase locally
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-8A
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-8B
NO
1 2 3 4 5 6 7 8 10 11 NS 12 13 14 15 16 17 18 19 20
REQ’D
PART NO
2 6 4 3 1 3 1 1 8 1 1 1 1 1 1 4 2 9 1 2
650263 044031 042027 045038 650272 ** ** 650291* 046050 022025 022036 ** 920745 046055 @@@ 046134 650114* 042038 046050 047009
DESCRIPTION
AIR CLEANER BAND 5/16 -18 NC KEPS NUT 8mm X 20mm X 1.25 GRADE 10.9 BOLT HOSE CLAMP #32 AIR INTAKE HOSE 5/16 INTERNAL TOOTH LOCK WASHER 1/4 FLAT WASHER AIR CLEANER MOUNT BRACKET, PRO 5/16-18 NC X 1”GRADE 5 BOLT 2-SCREW ROMEX CONNECTOR 3/4 3/4" STEEL LOCKNUT CAP PLUG KUBOTA FUEL FILTER 5/16 - 18 NC X 1 1/4 GRADE 5 BOLT FUEL FILTER MOUNTING PLATE 3/8 - 16 NC X 2 1/2 GRADE 5 BOLT ENGINE MOUNT 10mm X 20mm X 1.25 GRADE 8.8 BOLT 5/16 - 18 NC X 1 GRADE 5 BOLT 5/16 FLAT WASHER
LEGEND: NS= Not Shown ** = Purchase locally @@@ = See local Kubota Dealer
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-8A CONT.
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-8B CONT.
NO
21 22 23 24 25 26 27 28 29 30 31 32 NS 33 34 36 38 39 40 41 42 43 44 45 NS NS NS NS NS NS
REQ’D
PART NO
1 8 4 2 4 1 2 1 1 8 4 4 1 1 1 2 1 1 4 8 8 1 1 1 1 1 1 1 1 1
340105 650274 650259 046110 044038 330463 043065 650265* 920743 047016 043055 042018 651232 352139 650262 043055 046105 352135 650260 044033 047010 650289 650296 713086 340036 081018 081018 650154 650153 650171
DESCRIPTION
GROUND STRAP ENGINE MOUNT WASHER RUBBER ENGINE MOUNT 3/8 - 16 NC X 1” GRADE 5 BOLT 3/8 -16 NC NYLON INSERT NUT RUBBER GROMMET 3/8 SPLIT LOCK WASHER GENERATOR MOUNT KUBOTA OIL FILTER 3/8 FLAT WASHER S.A.E. 5/16 SPLIT LOCK WASHER 6mm X 10mm X 1.0 GRADE 8.8 BOLT MUFFLER KUBOTA BOX MUFFLER KIT AIR CLEANER 5/16 SPLIT LOCK WASHER 3/8 - 16 NC X 3/4 GRADE 5 BOLT EXHAUST MANIFOLD MUFFLER GASKET SNUBBING WASHER 5/16-18 NC NYLON INSERT NUT 5/16 FLAT WASHER BOX MUFFLER EXHAUST PIPE BOX MUFFLER EXHAUST PIPE BRACKET 1-3/8 MUFFLER CLAMP (for box muffler ex. pipe) REPLACEMENT AIR FILTER 5/16 FUEL LINE 14" 5/16 FUEL LINE 10" UPPER RADIATOR HOSE LOWER RADIATOR HOSE ENGINE MOUNT SPACER_
LEGEND: NS= Not Shown ** = Purchase locally @@@ = See local Kubota Dealer
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-8C
ISUZU/PERKINS ENGINE/GENERATOR ASSEMBLY
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-8D ISUZU/PERKINS ENGINE/GENERATOR ASSEMBLY NO
1
REQ’D
3
1 1 1 1 1
4
1
5
1
6 7
2 2 2 4 1 10 8 8 2 4 4 4 4 4 8 8 2 NS NS NS
2
8 9 10 11 12 13 14 15 16 17 18 19 20
PART NO
650191 352160 650264 @@@@ 650263 @@@@ 650262 @@@@ ** @@@@ 045038 650114* 650281* 650259 650265* 046050 047010 044033 044031 046134 047015 650274 650260 044038 042038 ** 047016 650220 650221 920878
DESCRIPTION
ISUZU 3LB1 PERKINS 103.10 AIR CLEANER BRACKET AIR CLEANER BRACKET AIR CLEANER POLYMER BAND CLAMP AIR CLEANER POLYMER BAND CLAMP AIR CLEANER ASSEMBLY AIR CLEANER ASSEMBLY AIR CLEANER INLET HOSE AIR CLEANER INLET HOSE #32 HOSE CLAMP ENGINE MOUNT FOOT (ISUZU) ENGINE MOUNT FOOT (PERKINS) RUBBER ENGINE MOUNT GENERATOR MOUNT PLATE 5/16 -18 NC X 1 GRADE 5 BOLT 5/16 FLAT WASHER 5/16-18 NC NYLON INSERT NUT 5/16-18 NC KEPS NUT 3/8-16 NC X 2.5 GRADE 8 BOLT 3/8 FLAT WASHER ENGINE MOUNT WASHER SNUBBING WASHER 3/8 -16 NC NYLON INSERT NUT M 10 X 20 GRADE 8.8 BOLT M12-1.25 X 20 GRADE 10.9 BOLT (PERKINS) 3/8FLAT WASHER S.A.E. ISUZU FUEL FILTER ISUZU OIL FILTER ISUZU GLOW PLUGS
LEGEND: NS= Not Shown ** = Purchase locally @@@ = See local Isuzu Dealer @@@@ = See local Perkins Dealer
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-8C CONT. ISUZU/PERKINS ENGINE/GENERATOR ASSEMBLY
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-8D CONT.
ISUZU/PERKINS ENGINE/GENERATOR ASSEMBLY
NO
REQ’D
PART NO
21 22 23 24 25 26 27 28
2 2 2 7 1 NS NS NS NS NS NS NS NS NS NS NS
046110 043065 042027 043055 042082 081016 081005 @@@ @@@@ @@@ @@@@ @@@ @@@@ 650225 651232 @@@
29 30 31 32
DESCRIPTION
3/8 - 16 NC X 1” GRADE 5 BOLT 3/8 SPLIT LOCK WASHER M8 X 16 GRADE 5 BOLT 5/16 SPLIT LOCK WASHER M8 HEX NUT 1/4 FUEL HOSE NYLON RETURN FUEL HOSE UPPER RADIATOR HOSE UPPER RADIATOR HOSE LOWER RADIATOR HOSE LOWER RADIATOR HOSE EXHAUST MANIFOLD MUFFLER GASKET EXHAUST MANIFOLD MUFFLER GASKET MUFFLER PRO - ISUZU MUFFLER - CAT M8 X 25 GRADE 8.8 BOLT
LEGEND: NS= Not Shown ** = Purchase locally @@@ = See local Isuzu Dealer @@@@ = See local Perkins Dealer
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-8E LOMBARDINI ENGINE/GENERATOR ASSEMBLY
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-8F
LOMBARDINI ENGINE/GENERATOR ASSEMBLY
NO
REQ’D
1
1
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 NS NS NS NS
4 4 1 8 4 8 4 4 4 8 2 2 2 1 6 2 4 4 1 1 1 1 1 1
PART NO
650592 100350 046134 047015 650563* 046050 650259 044033 650260 044038 650274 047010 046095 043065 047008 650562-01 042018 650567-01 044021 041078 650830 651236 081016 081005 ** **
DESCRIPTION
GENERATOR 6 KW PG GENERATOR 7.5 KW MECC ALTE 3/8-16 NC X 2.5 GRADE 8 BOLT 3/8 FLAT WASHER GENERATOR MOUNT PLATE 5/16 -18 NC X 1 GRADE 5 BOLT RUBBER ENGINE MOUNT 5/16-18 NC NYLON INSERT NUT SNUBBING WASHER 3/8 -16 NC NYLON INSERT NUT ENGINE MOUNT WASHER 5/16 FLAT WASHER 3/8-16 NC X 1/2 GRADE 5 BOLT 3/8 SPLIT LOCK WASHER 1/4 SS FLAT WASHER ENGINE MOUNT BRACKET 6MM X 16MM X 1.0 GRADE 8.8 BOLT RADIATOR SHROUD 1/4-20 NC KEPS NUT 1/4-20 X 1/2 TRUSS HEAD BOLT LOMBARDINI LDW 903 ENGINE MUFFLER FUEL LINE 48” NYLON RETURN LINE 55” GAUGE PANEL ENGINE HARNESS ASSEMBLY ENGINE WIRING HARNESS ONLY
LEGEND: NS= Not Shown ** = Purchase locally @@@@@ = See local Lombardini Dealer
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-8G 3011C CAT ENGINE/GENERATOR ASSEMBLY WITH REAR EXHAUST EXIT
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-8H
3011C CAT ENGINE/GENERATOR ASSEMBLY WITH REAR EXHAUST EXIT
NO
REQ’D
PART NO
1
1 1 1 1 1 1 4 8 4 1 1 2 2 2 1 1
352097 352236 651164 650851 650850 651166 042027 043055 042031 340112-2 340112-3 043065 044035 ** ** 651012 651012 640144
2 3 4 5 6 7 8 9 10 11 12 13 14
DESCRIPTION
CAT 3011C D RATE 6KW ENGINE CAT 3011C NON-D RATE 8KW ENGINE CAT 3011C REAR PANEL, PRO, REAR EXHAUST CAT 3011C MUFFLER BY STANLEY STANLEY MUFFLER, 10” TAILPIPE MUFFLER BRACKET, CAT 3011C, REAR EXHAUST 8MM X 16MM X 1.25 HEX BOLT 5/16” PLATED SPLIT LOCK WASHERS 8MM X 25MM X 1.25 HEX BOLT 1-1/2” MUFFLER CLAMP BASE 1-1/2” MUFFLER CLAMP BOLT 3/8” SPLIT LOCK WASHER 3/8-16 PLATED HEX NUT CAT 3011C MUFFLER GASKET CAT 3011C MUFFLER SPACER GENERATOR MOUNT 6KW BALDOR GENERATOR 8KW BALDOR GENERATOR
LEGEND: NS= Not Shown ** = Purchase locally
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-8I
NIGHT-LITE PRO SERIES TRAILER ASSEMBLY PARTS AND ACCESSORIES C-8J
NO
REQ’D
PART NO
1 2 3 4
1 2 4 2
650398* 046230 047025 044048
DESCRIPTION
REMOVABLE TONGUE WELDMENT 1/2-13 NC x 5" GRADE 8 BOLT ½ FLAT WASHER 1/2-13 NC NYLON INSERT HEX NUT
LEGEND: NS= Not Shown ** = Purchase locally
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES
THIS PAGE LEFT BLANK INTENTIONALLY
NIGHT-LITE PRO SERIES DECALS D-1A
REQ’D
PART NO
1 1 1 1 1 2 1 1 1 1 1 1 2 1 1 1 1 1 2 1 1
090165 090177 090034 090166 090284 090276 090159 090160 090139 090133 090158 090084 090278 090288 090224 090225 090163 090226 090002 090164 090240 650158 090256 090269 090262 090205 090232 090179 090309
2 1 1 1 1 1 1
DESCRIPTION
DECAL - DANGER ELECTRIC SHOCK ALIGNMENT ARROW DECAL - DIESEL DECAL - WARNING OVERHEAD HAZARD STRIPE DECAL SET NIGHT-LITE DECAL DECAL - WARNING COMBUSTIBLE GAS DECAL - WARNING EXCESS TOW DECAL - LATCH/UNLATCH DECAL - GROUND LUG DECAL - WARNING OPERATOR’S MANUAL DECAL - WARNING SHUT OFF LIGHTS PRO SERIES DECAL STARTING ENGINE, ISUZU & PERKINS STARTING ENGINE, KUBOTA PRO PICTORIAL INSTRUCTION DECAL - DANGER ELECTIC SHOCK DECAL -WARNING ROLL OVER PROTECTION DECAL - DANGER HIGH VOLTAGE DECAL - WARNING NON-VERTICAL DECAL - WARNING FOLD OUTRIGGERS DECAL SET COMPLETE - PRO LARGE ALLMAND DOOR DECAL SMALL ALLMAND REAR PANEL DECAL ELECTRIC WINCH PICTORIAL OPERATOR (Elec. Winch Only) DECAL - RED LATCH (Elec. Winch Only) DECAL -ELECTRIC WINCH WARNING (Elec. Winch Only) DECAL PROPOSITION 65 DIESEL DECAL-SPRING LATCH RELEASE
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES KUBOTA D905-BG E-1A
NIGHT-LITE PRO SERIES KUBOTA D905-BG E-1B
REF#
PART NO
DESCRIPTION
6 7 NS NS NS NS NS NS NS NS NS NS
Call Factory 340302 650262 650114* 650114* 920743 340301 340304 640146 640157 650592 640167 920745 081016 081005 @@@ 650134
NS NS
650265* 650290
RADIATOR HIGH TEMPERATURE SWITCH AIR CLEANER ENGINE MOUNT BRACE (LEFT) ENGINE MOUNT BRACE (RIGHT) KUBOTA OIL FILTER OIL PRESSURE SWITCH KUBOTA D905-BG ENGINE MARATHON 6KW GENERATOR MARATHON 8KW GENERATOR (KUBOTA 1105 ONLY) POWRGARD 6KW GENERATOR LEROY SUMER 50HZ 6KW GENERATOR FUEL FILTER 1/4 FUEL LINE 48" NYLON RETURN LINE 55" MUFFLER KIT ENGINE WIRING HARNESS (SEE WIRE SCHEMATIC F-1A) GENERATOR MOUNT PLATE REPLACEMENT AIR FILTER ELEMENT
1 2 4 5
FOR ENGINE PARTS NOT SHOWN, SEE KUBOTA D905 PARTS LIST. FOR GENERATOR PARTS NOT SHOWN, SEE MANUFACTURER’S LIST OR CALL 800-562-1373 FOR ASSISTANCE.
LEGEND: NS= Not Shown ** = Purchase locally @@@ = See local Kubota Dealer
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES ISUZU 3LB1 E-2A
NIGHT-LITE PRO SERIES ISUZU 3LB1 E-2B
REF# NS 1 NS NS NS NS NS
PART NO
2 NS NS 3 4 NS NS NS NS NS NS NS
@@ @@ 650261 650262 650263 @@ 650114* 650114* 650221 650220 920878 @@ 650191 640146 650592 640167 081016 081005 650225 650240
NS
650265*
DESCRIPTION RADIATOR HIGH TEMPERATURE SWITCH ISUZU AIR CLEANER BRACKET ISUZU AIR CLEANER ISUZU AIR CLEANER BAND CLAMP ISUZU AIR CLEANERAIR INLET HOSE ENGINE MOUNT BRACE (LEFT) ENGINE MOUNT BRACE (RIGHT) ISUZU OIL FILTER ISUZU FUEL FILTER ISUZU GLOW PLUG OIL PRESSURE SWITCH ISUZU 3LB1 ENGINE (INCLUDES RAD. AND SHROUD) MARATHON 6KW GENERATOR POWRGARD 6KW GENERATOR LEROY SUMER 50HZ 6KW GENERATOR 1/4 FUEL LINE 48" NYLON RETURN LINE 55" MUFFLER KIT ISUZU ENGINE WIRING HARNESS (SEE WIRE SCHEMATIC F-2A) GENERATOR MOUNT PLATE (ISUZU-NEW MOUNTS)
FOR ENGINE PARTS NOT SHOWN, SEE ISUZU 3LB1 PARTS LIST. FOR GENERATOR PARTS NOT SHOWN, SEE MANUFACTURES LIST OR CALL 800-562-1373 FOR ASSISTANCE.
LEGEND: NS= Not Shown ** = Purchase locally @@ = See local Isuzu Dealer
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES PERKINS 103.10 E-3A
NIGHT-LITE PRO SERIES PERKINS 103.10 E-3B NO
REQ’D
PART NO
1 2 3 4 NS 5 6 7 8 9 10 11 12 NS 13 NS NS NS NS NS NS NS NS NS NS NS NS NS
2 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 8 8 8 8 1
650284* @@@@ @@@@ @@@@ 650303 @@@@ 650281* @@@@ @@@@ @@@@ @@@@ @@@@ 650304 650305 352160 640146 640157 650592 640167 650762 650279* 650280* 030052 ** ** ** ** 650285
46" 26" 1 1 4 4 1
081005 081016 650278 @@@@ ** ** 650265*
NS NS NS NS NS NS NS
DESCRIPTION
RADIATOR SHROUD, PERKINS, SIDE HIGH TEMPERATURE SWITCH AIR CLEANER DUST CAP AIR CLEANER AIR FILTER ELEMENT AIR CLEANER, MOUNTING BRACKET ENGINE MOUNT BRACKET AIR INTAKE HOSE OIL PRESSURE SWITCH UPPER RADIATOR HOSE RADIATOR OIL DRAIN PLUG OIL FILTER FUEL FILTER PERKINS 103.10 ENGINE MARATHON 6KW GENERATOR MARATHON 8KW GENERATOR POWRGARD 6KW GENERATOR LEROY SUMER 50HZ 6KW GENERATOR LOMBARDINI LDW 903 ENGINE RADIATOR SHROUD, PERKINS, UPPER RADIATOR SHROUD, PERKINS, LOWER TRIM LOCK WITH RUBBER SEAL M 12-1.25 X 20 GRADE 10.9 BOLT 1/4-20 X.75 STAINLESS STEEL PAN SCREWS 1/4 SPLIT LOCK WASHER 1/4-20 NYLON INSERT NUT PERKINS ENGINE WIRING HARNESS (SEE WIRING SCHEMATIC F-3A) NYLON RETURN LINE 1/4 FUEL LINE GT MUFFLER MUFFLER GASKET M8-1.25 X 20 GRADE 8.8 BOLT 3/8 SPLIT LOCK WASHER MARATHON GENERATOR MOUNT PLATE
LEGEND: NS= Not Shown ** = Purchase locally @@@@ = See local Perkins Dealer
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES LOMBARDINI LDW 1003 E-3C
NIGHT-LITE PRO SERIES LOMBARDINI LDW 1003 E-3D
NO
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
REQ’D
1 2 1 1 1 1 1 8 8 6 4 4 2 2 5 2 1 1 1 2 2 2
PART NO
650830 100350 650562 100353 100352 100354 100614 046120 043065 046041 046115 044038 047015 046055 047010 044033 651236 046045 043055 ** ** **
LEGEND: NS= Not Shown ** = Purchase locally
DESCRIPTION
LOMBARDINI LDW 1003 ENGINE MECC ALTE LT3-100 GENERATOR NLPRO DEUTZ ENGINE MOUNT COMBO MOUNT BACK PIECE COMBO MOUNT BOTTOM PIECE MECC ALTE GENERATOR MOUNT BACK PLATE 5/16 -18 T SLOT NUT 3/8-16 X 1 1/2 HEX HEAD BOLT 3/8" SPLIT LOCK WASHER 5/16-18x1/2" 12 PT FLANGE HEAD BOLT 3/8-16 x 1 1/4 GR 5 HEX BOLT 3/8 - 16 NYLON INSERT NUT 3/8" FLAT WASHER 5/16-18 x 1 1/4" GR 5 HEX BOLT 5/16" PLATED FLAT WASHER 5/16 - 18 NYLON INSERT NUT LOMB MUFFLER 5/16 - 18 x 3/4" GR 5 HEX BOLT 5/16" PLATED SPLIT LOCK WASHER M8 x 1.25mm FLANGE NUT M12 - 1.75 X 25MM HEX BOLT 12MM WASHER
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
F-1A
NIGHT-LITE PRO SERIES ELECTRICAL DIAGRAMS KUBOTA SCHEMATIC (After Sept 1, 2004)
KUBOTA SCHEMATIC (Before Sept 1, 2004)
NIGHT-LITE PRO SERIES ELECTRICAL DIAGRAMS F-1B
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES ELECTRICAL DIAGRAMS F-2A ISUZU 3LB, 3LD ENGINE/GENERATOR WIRING HARNESS
PART#
DESCRIPTION
650240
ISUZU ENGINE WIRING HARNESS
NOTE: ALL CONNECTORS VIEWED FROM THE REAR
NIGHT-LITE PRO SERIES ELECTRICAL DIAGRAMS F-2B
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES ELECTRICAL DIAGRAMS CAT/PERKINS 103.10 ENGINE F-3A
PART#
DESCRIPTION
650285
CAT/PERKINS ENGINE WIRING HARNESS
CAT/PERKINS ENGINE WIRING HARNESS, KEYLESS OPTION
NIGHT-LITE PRO SERIES ELECTRICAL DIAGRAMS F-3B MARATHON GENERATOR SCHEMATIC
POW’R GARD GENERATOR SCHEMATIC
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES ELECTRICAL DIAGRAMS F-4A
NIGHT-LITE PRO SERIES ELECTRICAL DIAGRAMS F-4B
120V GFCI AND 240V RECEPTACLE WIRING
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES ELECTRICAL DIAGRAMS F-5A
MULTI-TAP 50 HZ TRANSFORMER WIRING DIAGRAM
NIGHT-LITE PRO SERIES ELECTRICAL DIAGRAMS F-5B DUTTON-LAINSON STRONG ARM WINCH SCHEMATIC
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES ELECTRICAL DIAGRAMS F-6A
LOMBARDINI LDW 903 WIRING DIAGRAM
NIGHT-LITE PRO SERIES ELECTRICAL DIAGRAMS F-6B
LOMBARDINI LDW 903 WIRING DIAGRAM
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES ALLMAND LIGHTING SYSTEMS LIMITED WARRANTY UNITED STATES and U.S. TERRITORIES THIS WARRANTY IS IN LIEU OFALL OTHER WARRANTIES, EXPRESSED OR IMPLIED INCLUDING WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR PURPOSE, AND ANY EXCEPTIONS ARE DESCRIBED IN THE PUBLISHED LIMITED WARRANTYADDENDUM,AVAILABLE UPON REQUEST. COMPONENTS, SUB-ASSEMBLIES, AND DEVICES MANUFACTURED BY OTHER MANUFACTURERS ARE NOT COVERED BY THIS WARRANTY. ALLWARRANTY INFORMATION FROM SUCH OTHER MANUFACTURERS IS PROVIDED WITHIN OR ACCOMPANY THESE GOODS.
Subject to the foregoing, the manufacturer, Allmand Bros. Inc., hereby warrants all equipment manufactured by Allmand Bros. Inc. to be free from defects in material and workmanship for a period of (1) year after delivery to the original purchaser. Additionally, Allmand Bros. Inc. hereby warrants all replacement parts supplied by Allmand Bros. Inc. to be free from defects in material and workmanship for a period of 90 days after date of invoice. Delivery shall be deemed for the purposes of this warranty to have occurred no later than five days following the date of sale agreement or invoice unless the purchase agreement or invoice specifically states a later delivery date in which case such delivery date shall control. The original purchaser shall be deemed to be a person who places the goods or products in actual use, and any person holding such goods solely for wholesale or retail sale purposes shall not constitute an original purchaser. PROVIDED, any leasing of these goods or other use beyond normal demonstration of same shall be deemed to be in use by an original purchaser and all warranty periods shall commence at the time of such use. During the warranty period any defective goods or parts hereof shall be repaired or replaced at manufacturer’s discretion. In the event it is necessary to return such goods or parts to the factory, all transportation charges shall be prepaid. The manufacturer shall in no event pay mileage expenses, but will warrant outbound ground freight. The obligations of the manufacturer is solely to repair or replace defective goods or parts or to refund the cost of the same if it is determined by the manufacturer that repair or replacement will not return the goods to proper working order or utility. THE REMEDIES SET FORTH HEREIN ARE EXCLUSIVE AND MANUFACTURER SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES. THE OBLIGATIONS OF THE MANUFACTURER HEREUNDER SHALL IN NO WAY EXCEED THE PRICE OF THE EQUIPMENT OR PART UPON WHICH SUCH LIABILITY IS BASED. The warranty shall not extend to tires, lamps, batteries, or parts that have been altered, changed, damaged, or improperly installed, repaired, operated or maintained. Provided, this exclusion shall not apply to installations, repairs or other work done at the manufacturer’s plant or under direct manufacturer’s supervision. The Operator’s Manual, to the extent covered therein, is deemed to set forth the proper procedures for operation, repair, installation, and maintenance of these goods. No representative, dealer or distributor of the company is authorized to make any changes or exceptions to this warranty unless expressly authorized in writing from the manufacturer. All warranty claims must be filed within forty-five (45) days of the failure. ALLMAND BROS. INC., 1502 W 4TH AVENUE, P.O.BOX 888, HOLDREGE, NE 68949 (308) 995-4495
NIGHT-LITE PRO SERIES
* Use these codes to designate color needed: 01-White 02-Gloss Black 03-Gray 04-Allmand Yellow 05-Orange 15-Plated
06-Allmand Gold 09-Flat Black 10-High temp Black 11-Red 12-Chrome
NIGHT-LITE PRO SERIES
