Network Cube Camera Quick Guide

1 Quick Guide of Network Cube Camera Network Cube Camera Quick Guide V3.0.0 Hangzhou Hikvision Digital Technology Co., Ltd. http://www.hikvision.com...
Author: Randolf Norris
311 downloads 0 Views 2MB Size
1 Quick Guide of Network Cube Camera

Network Cube Camera Quick Guide V3.0.0

Hangzhou Hikvision Digital Technology Co., Ltd. http://www.hikvision.com 2010-04

1 Quick Guide of Network Cube Camera

1.Camera Physical Description

Serial NO.

Description

1

Microphone hole

2

Micro SD card solt

3

LINK: Network status LED indicator. When the network is connected, the LED flickers in green.

4

Power LED indicator, which turns red when power is applied to the unit

5

Lens

6

ETHERNET: 10M / 100M self-adaptive Ethernet interface

7

RESET: Reset all parameters to factory default settings

8

Speaker hole

9

Power supply

10

Bracket mounting holes, used to fix the camera to the bracket

NOTE: When the camera is power up, press the ‘RESET’ button for about 10 seconds, then all parameters, including user name, password, IP address, port number, etc., will be reset to the factory default settings.

2 Quick Guide of Network Cube Camera

2.Installation Cube camera can be fixed in both wall and ceiling, customers can choose diffierent ways to install the camera according to their specific needs. The following section introduces the ceiling mounting, and the wall mounting follows the same way: Step 1: Fix the camera mounting bracket to the ceiling.

Fig 2.1 Fix camera mounting bracket

NOTE: If it is wall, you need to fix the expand bolt (note: the mounting hole of the expand bolt should align with the bracket) before fixing the bracket as ① in Fig 2.2.1 . If the wall surface is wooden, the part of ① in Fig 2.2.1 can be ignored and you can use the self-tapping screw to directly fix the bracket. Please note that the wall on which the camera is fixed should be able to bear at least three times the weight of the bracket and the camera. Step 2: Screw the mounting hole to the mounting bracket, and then adjust the camera to the desired monitoring location and finally tighten the knob on bracket to secure the camera to the ceiling.

3 Quick Guide of Network Cube Camera

Fig 2.2 Fix the Camera

Step 3: Viewing the video on the computer, if the scene is not that you want to monitor, loosen the knob on the mounting bracket and adjust the camera lens to the desired monitoring scene, and finally tighten the knob on bracket.

Fig 2.3 Done

4 Quick Guide of Network Cube Camera

3.Search and Modify IP SADP (Search Active Devices Protocol) software can automatically search the IP address of network cameras’ on the same network with connection diagram as follows:

rk two

Ne

le

cab

Switch

Net w

ork

cab

le

Computer

Network Camera The operation of searching and modifying IP address is described as following: 1. Install the SADP software, and then run the “sadpdlg.exe”.

2. Search IP address.

Click it 3. Modify IP address.

Show the IP address of the camera

5 Quick Guide of Network Cube Camera

1. Click [modify]

2. Input new IP address and the password ( Default: 12345) of the camera, then click [save]

3. Modify successfully

6 Quick Guide of Network Cube Camera

4.Preview via IE browser Note: The default IP of network cameras’ is ‘192.0.0.64’ with ‘admin’ as the administrator, ‘12345’ as the password, and ‘8000’ as the default port. For monitoring camera images, a comptuer running the Microsoft Windows Operating System and Internet Explorer (Version 6.0 or later) are required. In this manual, we take Windows XP and IE 6.0 for example. This chapter describes how to view the video from the camera via web browser, and operate as following:

1. Open the IE browser, set the security level to [Medium] in [Tools/InternetOptions/Security/Custom Level…]

7 Quick Guide of Network Cube Camera

2. Type the IP address of the camera and press [Enter], and then click the mention box that pop up.

3. Click [Run] to install the ActiveX control.

8 Quick Guide of Network Cube Camera

4. Input “Username” (Default: admin), “Password” (Default: 12345) and “Port” (Default: 8000) of the camera, then click [Login]

9 Quick Guide of Network Cube Camera

5. View the image For detailed instructions of further configuration, please refer to the user manual of network camera.

10 Quick Guide of Network Cube Camera

First Choice for Security Professionals