NETFRAME SHELF NFSHLF19X18 — 18" DEEP NFSHLF19X25 — 25" DEEP
7
LADDER RACK SUPPORT BRACKET NFLRB
8
FIBER SLACK MANAGER NFVSM
9
END PANEL NFEP
PATCHRUNNER
™
Vertical Cable Management Rack System
4
• Molded cable management fingers with integral bend radius control supports cable as it transitions from patch panel to vertical pathway without the need for horizontal cable managers
• Four built-in slack cable management spools organize and manage slack allowing standardized patch cord lengths • Dual hinged full length door • Angled modular patch panel promotes proper bend radius control
• Finger spacing aligns with the rack spaces simplifying cable routing
• Rack is UL listed for 800 lbs. load rating
83.8" 2129mm
NCMVF8
83.8" 2129mm
NCMVF12
83.8" 2129mm
NCMV8
FOR STANDARD EQUIPMENT RACK WITH NCMV12 AND NCMVF12 Pitch Dimension = 32.31 (820.7mm) For reference Only
12.00* (304.8mm)
20.25 (514.4mm) = 19" Rack
12.00* (304.8mm)
11.45 (290.8mm)
Front of Rack 19.04 (483.6mm)
12.50 (317.5mm)
NCMVF12 *Also available in 8" size
16.00 (406.4mm)
Part Number
Description
.187 Dia. Cable Front Back
NCMV12
12" WIDE FRONT/BACK
960
640
NCMVF12
12" WIDE FRONT ONLY
960
N/A
NCMV8
8" WIDE FRONT/BACK
480
320
NCMVF8
8" WIDE FRONT ONLY
480
N/A
17.10 (434.3mm)
3.00 (76.2mm)
2.12 (53.8mm) TYP
NCMV12
CAPACITY CHART
FLOOR FOOTPRINT
1.25 (31.8mm) TYP
83.8" 2129mm
NCMV12 *Also available in 8" size
Maximum Density Minimum Floor Space
5
1
5
2b
6
3 4
2a
7
Standard Equipment Rack Spacing Identification
5
OPTIONAL SYSTEM COMPONENTS Item Number
Description
STANDARD EQUIPMENT RACK — 19" X 7'
1
Item Number
3
CMR19X84 PATCHRUNNER MANAGERS WITH FRONT DOOR
2a
NCMV8 — 8" WIDE
2b
NCMV12 — 12" WIDE
4
5
Description
REAR DOOR NCMV8RD — 8" WIDE (Shown) NCMV12RD — 12" WIDE ANGLED PATCH PANEL CPPLA24WBL — 1RU, 24 PORT CPPLA48WBL — 2RU, 48 PORT (Shown) END PANEL NCMVEP
STANDARD
Cable Management Rack System
6
• Slotted duct organizes and manages cables for simple moves, adds and changes
• Patented wire retainers hold cable in place during cable installation and maintenance
• Removable duct fingers align with rack spaces
• Rack is UL listed for 800 lbs. load rating
• Cable pass through holes facilitate routing of cable from front to rear
83.0" 2108.2mm
83.0" 2108.2mm
WMPVF45
83.0" 2108.2mm
WMPV45
WMPVF6X8
CAPACITY CHART Part Number 83.0" 2108.2mm
.187 Dia. Cable Front Back
Description
WMPV45
4x5 DUCT FRONT/BACK
240
240
WMPVF45
4x5 DUCT FRONT ONLY
240
N/A
WMPV6X8
6x8 DUCT FRONT/BACK
588
588
WMPVF6X8
6x8 DUCT FRONT ONLY
588
N/A
WMPV6X8
FLOOR FOOTPRINT
FLOOR FOOTPRINT
FOR STANDARD RACK WITH 4X5 VERTICAL MANAGER
FOR STANDARD RACK WITH 6X8 VERTICAL MANAGER 6x8 Pitch Dimension = 27.07 (687.6mm)
4x5 Pitch Dimension = 25.31 (642.9mm)
For reference Only
For reference Only
1.25 (31.8mm) TYP
1.25 (31.8mm) TYP
20.25 (514.4mm) = 19" Rack 4.30 (109.2mm)
Front of Rack
2.12 (53.8mm) TYP
16.17 (410.7mm) WMPVF6X8 7.13 (181.1mm)
WMPVF45
4.09 (103.9mm) 7.00 (177.8mm) WMPV45 with WMPVCB
6.04 (153.4mm)
3.00 (76.2mm)
10.27 (260.9mm)
16.00 (406.4mm)
Front of Rack
12.50 (317.5mm)
3.18 (80.8mm)
12.50 (317.5mm) 3.00 (76.2mm)
6.00 (152.4mm)
20.25 (514.4mm) = 19" Rack
5.86 (148.8mm) WMPV45
16.00 (406.4mm) 2.12 (53.8mm) TYP
8.75 (222.25mm) WMPV6X8 with WMPVCB
7.61 (193.3mm) WMPV6X8
The Standard in Cable Management 5
2a 1
6
2b
7
Standard Equipment Rack Spacing Identification
OPTIONAL SYSTEM COMPONENTS Item Number
1
Description
STANDARD EQUIPMENT RACK — 19" X 7' CMR19X84 STANDARD VERTICAL CABLE MANAGERS WITH COVERS
2a
WMPV45 — 4" X 5" X 7'
2b
WMPV6X8 — 6" X 8" X 7'
3
CENTER BRACKET KIT (4 BRACKETS INCLUDED) — USE WHEN MOUNTING BETWEEN RACKS WMPVCB
Refer to page 8 for horizontal cable managers.
3
7
HORIZONTAL CABLE MANAGEMENT PANELS FOR
8
19" NETFRAME ™ RACKS AND STANDARD RACKS
NETMANAGER ™ CABLE MANAGERS Integral bend radius control throughout all cable pathways
Built-in cable retainers
Pass through holes allow front to rear cabling Removable front cover hinges 180° up or down Patent Pending NCMH2 PART NUMBER
DESCRIPTION
Two Rack Space Panel on 19" Rack
NCMHF2
NCMH2
Horizontal Cable Manager, Front 3x3in. (76.2x76.2mm), Rear 2x5in. (50.8x127mm). Snap on rear cover.
NCMHF2
Horizontal Cable Manager, Front only 3x3in. (76.2x76.2mm).
NCMHF1 One Rack Space Panel on 19" Rack NCMHF1
Horizontal Cable Manager, Front only 1.5x3in. (38x76.2mm).
One rack space = 1.75" (44.45mm)
OPEN-ACCESS™ CABLE MANAGERS • Patented snap on D-rings for complete flexibility
• Optional snap-on cover
• Pass through holes allow front to rear cabling
• Flexible D-rings allow fast and easy routing of cables
PART NUMBER
DESCRIPTION
Two Rack Space Panel on 19" Rack
CMPH2
CMPH2
Includes pre-assembled D-rings on front and rear. Front D-ring size = 3x3in. (76.2x76.2mm). Rear D-ring size = 3x5in. (76.2x127mm).
CMPHF2
Includes pre-assembled D-rings on front only. Front D-ring size = 3x3in. (76.2x76.2mm).
CMPHF2
One Rack Space Panel on 19" Rack
CMPH1
CMPH1
Includes pre-assembled D-rings on front and rear. Front D-ring size = 1.5x3in. (38.1x76.2mm). Rear D-ring size = 1.5x5in. (38.1x127mm).
CMPHF1
Includes pre-assembled D-rings on front only. Front D-ring size = 1.5x3in. (38.1x76.2mm).
CMPHF1 One rack space = 1.75" (44.45mm)
CAPACITY CHART Number of Rack Spaces
.187 Dia. Cable
1RU PANELS
36
2RU PANELS
72
Refer to Network Connectivity Solutions Catalog (SA-NC10CB01A) for the full-line of 19" and 23" Racks and Horizontal Cable Management Panels
ACTIVE EQUIPMENT CABLE MANAGERS • For use with active equipment that have cards (blades) oriented horizontally 9
• Integral bend radius control supports patch cables as they go to and from cards • Finger spacing helps keep patch cables aligned with cards
PART NUMBER
CMBRC5E
DESCRIPTION
RACK SPACES
CMBRC5E
Cable Management Bend Radius Clip HxDxW=8.75x5.0x1.03in. (222.2x127.0x26.2mm) Capacity: 48 cables (.187 dia.) per rack space
5
CMBRC5
Cable Management Bend Radius Clip HxDxW=8.75x3.3x1.03in. (222.2x83.8x26.2mm) Capacity: 24 cables (.187 dia.) per rack space
5
One rack space = 1.75" (44.45mm)
SHELVES • Options with Load ratings up to 200 lbs. suitable for use with lightweight and heavyweight active and passive equipment
• Slide out mouse pad integral to all keyboard shelves
• Options for standard (20" wide) or compact (16.5" wide) keyboards
PART NUMBER
SRM19FM2
SRM19CMV3
DESCRIPTION
RACK SPACES
Rack Mount Shelves SRM19FM1 Front mount shelf HxDxW=1.73x19.00x15.15in. (43.9x482.7x384.8mm) Load rating 30 lbs.
1
SRM19FM2
Front mount shelf HxDxW=3.84x19.00x15.15in. (88.4x482.7x384.8mm) Load rating 50 lbs.
2
SRM19CM3
Center mount cantilevered shelf HxDxW=5.23x19.24x12.45in. (132.8x488.7x316.2mm) Load rating 200 lbs.
3
SRM19CMV3
Center mount cantilevered shelf, vented HxDxW=5.23x19.24x12.45in. (132.8x488.7x316.2mm) Load rating 200 lbs.
3
SRM19MK2
Slide out keyboard shelf with pull-out mouse pad—Accepts up to 16.5" wide keyboards HxDxW=3.43x17.00x18.48in. (87.17x431.8x469.33mm)
2
SRM19MPK2
Slide out pivoting keyboard shelf with pull-out mouse pad—Accepts up to 20" wide keyboards HxDxW=3.43x17.00x18.48in. (87.17x431.8x469.33mm)
2
Keyboard Shelves SRM19MK2
One rack space = 1.75" (44.45mm)
SRM19MPK2
RACK MOUNT POWER STRIPS • Multiple mounting options provide a convenient power supply for active equipment
• Dual circuit option for use with equipment needing a redundant power supply
DESCRIPTION
RACK SPACES
Rack mount power strip with a 15amp circuit, 10 receptacles and a 10 foot power cord, NEMA 5-15p plug. HxDxW=1.72x3.75x19.00in. (43.7x95.3x483.7mm)
1
Rack mount power strip with a 20amp circuit, 10 receptacles and a 10 foot power cord, NEMA 5-20p plug. HxDxW=1.72x3.75x19.00in. (43.7x95.3x483.7mm)
1
Rack mount power strip with a 20amp circuit, 10 receptacles and a 10 foot power cord, NEMA 5-20p plug. HxDxW=38.50x1.46x1.85in. (977.9x37.1x47.0mm)
—
Rack mount power strip with 2-20amp circuits (10 receptacles per circuit) and 2-10 foot power cords, NEMA 5-20p plug. HxDxW=66.25x1.46x1.85in. (1682.8x37.1x47.0mm)
—
™
10
WORLD LEADER IN NETWORK CONNECTIVITY SOLUTIONS O PTICOM ™ E NCLOSURES AND A DAPTER P ANELS • OPTICOM Fiber Optic Enclosures are designed to effectively manage fiber optic terminations and splices
OPTICOM ™ FIBER DISTRIBUTION SYSTEM • Can be mounted to EIA 19" or 23" racks
• Top, bottom and side cable entry
• Includes Fiber Optic Cable Routing Accessory Kit and label
• Accepts OPTICOM Fiber Adapter Panels
PART NUMBER
DESCRIPTION
COLOR
RACK SPACES
FRME1
Enclosure will accept 3 Fiber Adapter Panels. Supports up to 36 fibers. Dimensions: HxDxW=1.74x11.50x19.00in. (44.2x292.1x482.6mm)
Black
1
FRME2
Enclosure will accept 6 Fiber Adapter Panels. Supports up to 72 fibers. Dimensions: HxDxW=3.45x11.65x19.00in. (87.6x295.9x482.6mm)
Black
2
FRME3
Enclosure will accept 9 Fiber Adapter Panels. Supports up to 108 fibers. Dimensions: HxDxW=5.23x11.65x19.00in. (132.8x295.1x482.6mm)
Black
3
FRME4
Enclosure will accept 12 Fiber Adapter Panels. Supports up to 144 fibers. Dimensions: HxDxW=6.90x11.65x19.00in. (175.3x295.9x482.6mm)
Black
4
COLOR
RACK SPACES
FRME1
FRME2
One rack space = 1.75" (44.45mm)
FRME3
FRME4
OPTICOM ™ FIBER ADAPTER PANELS • Snaps quickly into the front of all OPTICOM Fiber Optic Enclosures
PART NUMBER
FAP6WST
FAP6WST
Fiber adapter panel preloaded with six (6) ST adapters with phosphor bronze sleeves.
Black
1
FAP3WBUDSC
Fiber adapter panel preloaded with three (3) blue SC duplex adapters with phosphor bronze sleeves.
Black
1
FAP6WBUDSC
Fiber adapter panel preloaded with six (6) blue SC duplex adapters with phosphor bronze sleeves.
Black
1
FMP6
Panel accepts up to six (6) MINI-COM ® Modules for Fiber Optic, UTP, ScTP and Coax applications.
Black
1
FAP3WBUDSC
FAP6WBUDSC
DESCRIPTION
One rack space = 1.75" (44.45mm)
FMP6
Refer to Network Connectivity Solutions Catalog (SA-NC10CB01A) for information on our complete product line.
11
Copper Connectivity • GIGA-TX ™ Category 6 module exceeds all requirements including Powersum ACR, EEFEXT and Return Loss • Category 5e and 6 patch cords feature next generation stranded cable and enhanced performance modular plugs Refer to Network Connectivity Solutions Catalog (SA-NC10CB01A) for information on our complete product line.
Fiber Connectivity • Patch cords 100% factory tested and inspected for insertion loss • Designed and tested to pass all TIA/EIA-568-B.3 performance requirements
F IBER R UNNER ™ Cable Routing System
• SC, ST* and FJ solutions available Refer to Network Connectivity Solutions Catalog (SA-NC10CB01A) for information on our complete product line. *ST is a trademark of Lucent Technologies.
• Provides a routing solution that is designed to route and protect fiber optic and copper cabling within an equipment room or facility • QUIKLOCK ™ couplers connect system components in less than 5 seconds without the use of tools Refer to FIBERRUNNER Cable Routing System Product Bulletin (SA-SR07CB01A) for information on our complete product line.
Ladder Rack Accessories • Route and secure cables on ladder racks • Waterfall accessories provide bend radius control for communication cable • Stackable cable rack spacers eliminate pinch points Refer to Network Connectivity Solutions Catalog (SA-NC10CB01A) for information on our complete product line.
Network Grounding Systems • CTAPs are used for tapping into un-broken continuous main cable as a splice, wire joint or making parallel wire connections • Compression Lugs are manufactured from seamless copper tubing for high conductivity and marked with easy to read die index numbers • CT-2001 Tool crimps #8AWG-500 kcmil copper lugs and copper CTAPs to #2AWG
Refer to Network Grounding Systems Catalog (SA101N516-NL) for information on our complete product line.
Full line of Compression Lugs, CTAPs and Crimping Tools
