Need more info? Contact us! Sales contacts

1

2

1

3

4

2

Tomas Sandström [email protected] | 070-558 28 22 Kiruna/Gällivare, Luleå/Boden, Haparanda/Kalix, Piteå, Skellefteå, Lycksele, Umeå, Sollefteå, Örnsköldsvik, Härnösand/Kramfors





Johnny Dahl [email protected] | 070-512 25 77 Östersund, Sundsvall, Hudiksvall/Ljusdal, Bollnäs/Söderhamn, Gävle/Sandviken Andreas Danneborn [email protected] | 070-620 57 52 Mora, Borlänge/Falun, Karlstad, Ludvika, Arvika, Lindesberg, Säffle/Åmål, Karlskoga, Örebro Lars Holm Försäljningschef/Entreprenad Sverige [email protected] | 070-926 30 35



Johan Sjögren [email protected] | 070-554 50 05



Dennis Carlberg [email protected] | 070-285 80 77 Avesta/Hedemora, Fagersta, Sala, Uppsala, Norrtälje, Stockholm/Södertälje

5

Michael Brandt [email protected] | 070-680 07 70 Enköping, Västerås, Köping, Nyköping, Katrineholm, Eskilstuna, Norrköping, Örebro, Karlskoga, Kristinehamn/Filipstad, Karlstad

3

6

4 3



5 6 7

7



Jens Nielsen [email protected] | 070-522 26 29 Uddevalla, Trollhättan/Vänersborg, Mariestad, Lidköping/Skara, Skövde, Göteborg/Alingsås, Falköping, Borås, Falkenberg/Varberg

Bengt Carlsson [email protected] 076-141 92 00 Mjölby/Motala, Linköping, Tranås, Västervik, Eksjö/Nässjö/Vetlanda, Hultsfred/Vimmerby, Växjö, Ljungby, Värnamo, Oskarshamn, Kalmar, Visby

8

8

Greger Paulsson Wiveus [email protected] 31 02 Halmstad, Ängelholm, Hässleholm, Kristianstad, Karlshamn, Karlskrona, Helsingborg/Landskrona, Eslöv, Malmö/Lund/ Trelleborg, Ystad/Simrishamn

Sika Sverige AB Domnarvsgatan 15, Box 8061 • 163 08 Spånga • Sweden Phone: 46 8 621 79 00 A SIKA BRAND

For experts from experts

With Casco Floor Expert, you’re never stuck Every floor is different. When choosing adhesives and floor levelling compounds, there are a great manyaspects to consider: climate conditions, practical issues, safety and health factors, legal requirements – just to name a few. And, of course, the fact that the final results should look and feel professional, both now and for years to come.

CONTENTS

flow products ................................10-12

PVC ............................................ 18/19

hand products . .................................. 13

linoleum and textile .................... 20/21

introduction of brand ..................... 4/5

base products .................................... 14

rubber and wood . ...................... 22/23

assortment overview .................... 6/7

primer accessoires . ........................... 15

special products ........................ 24/25

FLOOR LEVELLING COMPOUNDS ... 8/9

ADHESIVES ................................... 16/17

sales team / contacts ................ 26 -28

5

23

26

16

9

content 3

Simply clever! One brand, all possibilities: Casco Floor Expert. A simple solution that makes your work easier – you now need only one brand to create high quality floors. Casco Floor Expert is the professional base for successful work: easy to apply, reliable and with a simple and clearly structured product range. Take a look!

introduction of brand 5

That makes experts perfectly happy: x-x mm

x kg 1 m2

application

layer-thickness

ready for covering

consumption / 1 mm thick

FIN

2

1-5 mm

3h

1,3 kg/m2/mm

EF

2

1-20 mm

2h

1,6 kg/m2/mm

ZZ

1+2

0,5-5 mm

30 min

1,1 kg/m2/mm

CascoProff

CascoLin

AST

2

1-5 mm

12 h

1,3 kg/m2/mm

CascoProff GP

CascoLin Extra

SP-X / SuperPlan

2

1-25 mm

24 h

1,5 kg/m2/mm

CascoProff Extra

LinoTex

ZM

2

1-10 mm

24 h

1,5 kg/m2/mm

ZM Rapid

2

1-10 mm

1,5-2 h

1,5 kg/m /mm

FC

2

1-8 mm

24 h

1,6 kg/m2/mm

MX

2

3-40 mm

24 h ****

1,8 kg/m2/mm

MXF

2

3-40 mm

24 h ****

1,8 kg/m2/mm

LX

2

3-50 mm

24 h ****

1,8 kg/m /mm

2+3

4-15 mm

24 h ***

1,8 kg/m2/mm

AP

2

1-30 mm

24 h *

1,5 kg/m2/mm

APF

2

3-30 mm

24 h *

1,5 kg/m2/mm

XA

2

1-10 mm

48 h **

1,5 kg/m2/mm

XAF

2

1-10 mm

48 h **

1,5 kg/m2/mm

C

SEZ Plus

2

10-80 mm

24 h

1,8 kg/m /mm

G

ADE

2

3-60 mm

24 h ***

1,8 kg/m2/mm

C

G

Flow

DSP

2

G

Base

PVC

Linoleum

CascoProff Universal CascoProff Extreme

2

C

CascoProff Object

Wood Parkett Elastic Plus

Textile CascoProff Textile CascoProff TapeFix

Rubber

Special

2

Gummilim

CascoProff Conductive

CascoThan 2K

iFloor CascoProff Solid

Primer Accessoires

FLOOR LEVELLING COMPOUNDS / SCREEDS

3

FLOOR ADHESIVES

Hand

1 2

≈  x h

VD

90-100 g/m2

DraLoss Primer

VD Fix

90-150 g/m2

CascoPlomb

VD Super

100-150 g/m2

C = Cement based | G = Gypsum based | * = 24 hours < 3 mm | ** = 48 hours < 3 mm | *** = 24 hours < 5 mm | **** = 24 hours < 10 mm

Find out more: www.casco.se

assortment overview 7

Flow When you choose a self-levelling compound, you have to make careful considerations: Which layer-thickness do you want? When do you want to cover it with covering material? Casco Floor Expert makes your decision easier: We offer professional self-levelling compounds for a broad range of applications and with different drying times – for thin-layer levelling, slope levelling in wet-room areas and levelling in thick layer. Our high-quality FLOW products are ready to be covered after times between 90 minutes and approx. 3 days. The layer-thickness ranges from 0,5 to 50 mm, giving you maximum flexibility for your daily work.

Flow

Floor levelling compounds

When you need a sturdy levelling compound for repairs or full-surface smoothing with short coverable time, Casco Floor Expert is your first choice. Our HAND products are the professional solution for various kinds of application and drying times. They are ready for covering after between 30 minutes and approx. 16 hours – with a layer-thickness ranging between 0,5 to 20 mm.

We have turned SCHÖNOX floor levelling compounds into Casco Floor Expert to make life easier for you: one brand for everything you need to create professional floors. And the brand new packaging shows you everything you need to know – simple, clear and in detail:

Base Casco Floor Expert screeds are the professional solution for levelling, repairing and filling molded solid indoor surfaces. They withstand high loads – which makes them perfectly suitable for both fixed and floating constructions. Our BASE products are ready to be covered after approx. 24 hours; their layer-thickness ranges from 10 to 80 mm.

• Clear information about characteristic: “Hand”, “Flow” or “Base” • Product colours are clearly related to product category • New icons give you all the most important infos at a glance • Clear information what to use the product for • Product names remain the same • Key information easy to find and to understand > easy to select and pick up the right product • “SCHÖNOX Technology” printed on every package floor levelling compounds 9

Base

You know SCHÖNOX floor levelling compounds? Then you know Casco Floor Expert floor levelling compounds!

Hand

Hand

SP-X / SuperPlan

C

Dust reduced, highly fluid fine levelling SP-X / SuperPlan is a dust reduced, cementbased self levelling compound. The volume of dust generated when mixing has been cut by 90 %, which makes the product ideal for use in places where adjoining areas cannot be covered/cordoned off – when renovating shopping malls or hospitals, for example. SP-X / SuperPlan features excellent self-levelling properties and is recommended for floors that are to have a surface coating applied. For indoor use. Has elevated pressure resistance and rigidity, making it ideal for public areas.

Flow

C

ZM

MX

Fine self levelling compound ZM is a cement-based self levelling compound with very low shrinkage and good self levelling properties for use with most types of solid substrate that require covering indoors.

C

MXF

Dust reduced levelling compound for indoor use MX is a levelling compound developed especially for underfloor heating, levelling floors and slope levelling in wet room areas – for indoor use. MX features little shrinkage tension. The drying time is determined by layer thickness and climate conditions. Layers of up to 10 mm are ready for covering after 1 day.

Layer thickness: 1-10 mm Ready for foot traffic: after approx. 2 hours Ready for covering: after approx. 24 hours

Fibre-reinforced levelling, for indoor use MXF is a specially developed levelling compound featuring fibres to reduce the risk of shrinkage tension. Recommended for slope levelling, underfloor heating and for indoor use. The drying time is determined by layer thickness and climate conditions. Layers of up to 10 mm are ready for covering after 1 day. Before using the product outside and on areas permanently affected by water, make sure to read the product information sheet carefully – especially.

Layer thickness: 3-40 mm Ready for foot traffic: after approx. 3 hours Ready for covering: after approx. 24 hours

Layer thickness: 3-40 mm Ready for foot traffic: after approx. 3 hours Ready for covering: after approx. 24 hours

Layer thickness: 0.5-25 mm Ready for foot traffic: after approx. 3 hours Ready for covering: after approx. 24 hours

≈ 

C

1,5-2 h

ZM Rapid

Self levelling compound for fast covering ZM Rapid is an extremely rapid setting self levelling compound that is ready for covering after just 1.5–2 hours, on most types of surface. Ideally suited to embedding underfloor heating systems, with high compression strength combined with excellent flowability. Also suitable for pumping. Layer thickness: 1-10 mm Ready for foot traffic: after approx. 1-1.5 hours Ready for covering: after approx. 1-2 hours

C

FC

C For fine levelling FC is a rapid setting, fine self levelling compound for use with most types of solid substrate that require covering indoors. Intended for floors that are to be finely levelled and given an outer coating in residences, offices, hospitals, schools, etc. Layer thickness: 1-8 mm Ready for foot traffic: after approx. 3 hours Ready for covering: after approx. 24 hours

LX

C LX is a cement-based levelling compound for levelling of floors and slope levelling in wet room areas with very long scraping time – for indoor use. The drying time is determined by layer thickness and climate conditions. Layers of up to 10 mm are ready for covering after 1 day. Layer thickness: 3-50 mm Ready for foot traffic: after approx. 3 hours Ready for covering: after approx. 24 hours

DSP Levelling compound that does not require surface coating DSP is a levelling compound for concrete floors that does not require a surface coating. For indoor and outdoor use. Recommended for floors subject to normal load, e.g. shops, industrial premises, warehouses, production halls, garages, basements, balconies. Must be surface coated when used for surfaces that are subject to heavy load and when a neat, homogeneous finish is required. Extremely high pressure resistance and rigidity. Water resistant. Layer thickness: 4-15 mm Ready for foot traffic: after approx. 3 hours Ready for covering: after approx. 24 hours

C = Cement based | G = Gypsum based

flow products 11

Flow

C

≈  2h

≈  3h AP

G

APF

Flow

High-quality gypsum-based levelling compound AP is a dust reduced product based on a special type of gypsum which eliminates shrinkage tension from the levelling compound. Ideal for weak substrates such as old glue residue, light concrete and asphalt. As AP is self-drying, the drying time is largely defined by the layer thickness and external climate conditions. Usually dries at a rate of 3 mm/day, depending on temperature, humidity and ventilation in the room in question.

C

FIN

Fibre-reinforced, gypsum-based levelling compound APF is a fibre-reinforced, high-durability levelling compound for indoor use. APF is based on a special type of gypsum that eliminates shrinkage tension, making it ideal for bridging cracks. Suitable for use with underfloor heating and weak substrates such as wooden floors, old adhesive residue and light concrete. As APF is a normal drying product, the actual drying time is largely defined by layer thickness and external climate conditions. Usually dries at a rate of 3 mm/day, depending on temperature, humidity and ventilation in the room in question.

Layer thickness: 1-30 mm Ready for foot traffic: after approx. 2 hours Ready for covering: depending on the thickness

C

EF

Primer-free sturdy levelling compound FIN is a dust reduced, rapid setting manual filler for indoor use. It is primer free and economical (low material consumption). The flexible consistency makes it simple to apply, creating a neat, smooth finish. FIN can be applied in layers up to 5 mm thick – and up to 20 mm thick locally.

Quick setting sturdy levelling compound EF is a dust reduced universal/combi-filler for filling, repairs, slope levelling and full surface smoothing of floors, for indoor use. Excellent for inclined filling and for underfloor heating.Thicker layers can be applied locally. The product features low shrinkage tension and is quickly ready for covering. Intended for floors that are to be given an outer coating in residences, offices, hospitals, schools, etc.

Layer thickness: 1-5 mm Ready for foot traffic: after approx. 1 hours Ready for covering: after approx. 3 hours

Layer thickness: 1-5 mm Ready for foot traffic: after approx. 1 hours Ready for covering: after approx. 2 hours

Layer thickness: 3-30 mm Ready for foot traffic: after approx. 2 hours Ready for covering: after approx. 24 hours

≈  0,5 h G

XA

G Gypsum-based self levelling compound XA is a gypsum-based levelling compound which eliminates shrinkage tension from the levelling compound. Ideal for weak substrates such as old glue residue, light concrete and asphalt. As XA is self-drying, the drying time is largely defined by the layer thickness and external climate conditions. Usually dries at a rate of 3 mm/ 48 hours, depending on temperature, humidity and ventilation in the room in question. Layer thickness: 1-10 mm Ready for foot traffic: after approx. 3 hours Ready for covering: after approx. 48 hours

C = Cement based | G = Gypsum based

XAF

C Gypsum-based self levelling compound with fibre XAF is a gypsum-based self levelling compound with fibre which eliminates shrinkage tension from the levelling compound for indoor use. Ideal for weak substrates such as old glue residue, light concrete and asphalt. As XAF is self-drying, the drying time is largely defined by the layer thickness and external climate conditions. Usually dries at a rate of 3 mm/ 48 hours, depending on temperature, humidity and ventilation in the room in question.

ZZ

G White, extremely rapid sturdy levelling compound ZZ is a white, extremely rapid manual filler for quick repairs, full surface smoothing and levelling. The short hardening time makes ZZ the perfect choice for rapid repairs, full surface smoothing and evening out differences in level. The white colour minimises the risk of colour showing through when light surface materials are used. Primerfree and flexible. Layer thickness: 0,5-5 mm Ready for foot traffic: after approx. 20 minutes Ready for covering: after approx. 30 minutes

AST Gypsum-based sturdy levelling compound AST is dust reduced, gypsum-based and does not require primer. Used for full surface smoothing and repairs. For cement-, gypsum- and wood-based substrates. Excellent in combination with Casco Floor Expert gypsum based levelling compounds. Makes it quick to finish gypsum-based floors. Produces a neat finish, with low shrinkage tension. Layer thickness: 1-5 mm Ready for foot traffic: after approx. 1 hours Ready for covering: after approx. 12 hours

Layer thickness: 1-10 mm Ready for foot traffic: after approx. 3 hours Ready for covering: after approx. 48 hours

flow and hand products 13

Hand

G

SEZ PLUS

G Quick setting screed SEZ PLUS is a rapid screed, intended for levelling, mending and filling poured and solid substrates, indoors. Can withstand high loads and is therefore suitable for both fixed and floating constructions. Ideal for use in embedding electrical underfloor heating elements.

Layer thickness: 10-80 mm Ready for foot traffic: after approx. 3 hours Ready for covering: after approx. 24 hours

ADE

VD Gypsum-based self levelling screed ADE is a self-leveling gypsum based screed, specially used for weak surface like asphalt, anhydrite and similar. ADE has fine selfleveling properties and is used in indoor flooring, which later must be installed with coverings.

VD Fix Water-based, dispersion-based primer VD is a water-based adhesion primer for use on substrates prior to the application of Casco Floor Expert self levelling compounds, levelling compounds, adhesives and wet-room/ sealing systems. For improved adhesion and reduced absorption, as protection for plaster and wood before surface treatment with cement-based products.

Layer thickness: 3-60 mm Ready for foot traffic: after approx. 4 hours Ready for covering: after approx. 24 hours

Ready for use solvent-free synthetic resin dispersion primer VD Fix is especially effective for protection against moisture in levelling compound during the application phase with short drying time. Also for reducing absorbency and increasing adhesion of levelling compound. For indoor use only.

Material consumption, concentrated: approx. 7 - 10 m2 / kg Drying time: 10 minutes - 1 hour

Material consumption, concentrated: approx. 5 m2 / kg Material consumption, diluted 1:3: approx. 20 m2 / kg Drying time: 10 minutes - 4 hours

VD Super

RENOTEX Multiaxial fibreglass reinforcement matting RENOTEX is fibreglass reinforcement matting intended to provide extra strength when levelling in combination with APF. The multiaxial construction of the fibreglass weave provides powerful reinforcement in all directions.

Water-based, ready to use special primer VD Super is an adhesion primer for smooth, tight, level, non-absorbent surfaces before application of Casco Floor Expert levelling compounds, filler, ceramic adhesives and wetroom/sealing systems. For example: ceramic coverings, natural stone, steel polished, compact and high-alkaline concrete, corrosion-protected metal, Terrazzo and hard mastic asphalt coatings that feature strong adhesion to the substrate. Also suitable for old surface coverings (not polyolefin or PU) made of vinyl, rubber, linoleum or epoxy colour/compound. Material consumption: approx. 100-150 g/m2 Drying time: 30 minutes - 2 hours

C = Cement based | G = Gypsum based

base products / primer accessoires 15

Primer Accessoires

Base

C

Wood Wood is a living, breathing, moving material. Glued wooden flooring is almost noiseless, following your movements without annoying clicks or creaks. Our adhesives suit most types of wooden floors and laying methods, and can even be applied to damp concrete – up to 85 % RF – with little or no waiting time.

Textile Coarser types of textile flooring – coconut fiber, jute, sisal and action back – are more demanding to lay than quick tile-based carpeting. We provide adhesives with extra strong tack for more difficult textiles, as well as water-based adhesives with a tape effect for simple changing of carpet tiles.

You know Casco adhesives? Then you know Casco Floor Expert adhesives! Casco adhesive are well known and recognized amongst floor contractors for decades. Never change a winnig team: You’ll surely get warm with the new, modern and improved design. Becuase it makes it simple for you to recognize and classify the different adhesives. • Clear information about field of use • Product names remain the same • Product colours remain the same • Clearly connected to Casco Expert Floor levelling compounds

Rubber Rubber flooring is robust, resilient and versatile, and has the advantage of being able to withstand extremely high loads as well as general wear and tear. We supply tough, reliable adhesives for both heavy-duty floors and lighter flooring solutions, adapted to different environments and stress levels.

Special Tricky surfaces, special requirements or unusual conditions? Casco has a wide variety of products for all kinds of situations. Here are a few examples; don’t hesitate to contact us if you need help finding a product for your particular need.

adhesives 17

Linoleum Wood

Linoleum – a natural material made of cork dust, linseed oil, pine rosin and wood flour – is durable and flexible with good isolating properties. This makes it a popular alternative for both home and work environments. Our linoleum-adapted adhesives are easy to work with and contain low levels of water to eliminate any risk of swelling.

Textile

Linoleum

Rubber

Today’s variation of plastic flooring has become quite complex, with attractive solutions for almost any environment – from light and flexible vinyl floors for home use, to tough, anti-slip surfaces for hospitals and industrial kitchens. Our adhesives are adapted to each floor type’s specific demands, with easy application and reliable results.

PVC

PVC

Special

Adhesives

PVC

PVC

CascoProff

CascoProff Extra

CascoProff Universal

CascoProff Object

Floor adhesive, suitable for gluing most types of plastic with or without backing, linoleum, textile floor coverings. Polyolefine coverings with primed backing.

Fast setting floor adhesive with a high degree of tack, and long assembly time.

Special floor adhesive for chlorine free floor coverings. Also suitable for gluing most types of plastic, linoleum, textile and rubber floor coverings.

Floor adhesive, suitable for gluing most types of plastic coverings with or without backing. Linoleum (without polyurethane treatment) and textile floor coverings. Only for wall to wall application.

Consumption: 3 – 6 m2/liter Assembly time: Wet gluing 0 – 30 minutes, tackifying gluing 30 – 60 minutes Working environment: +18°C to +23°C and 20 – 70 % RH Dry solid: approx. 74 %

Consumption: 3 – 6 m2/liter Assembly time: Wet gluing 0 – 20 minutes, tackifying gluing 20 – 90 minutes Working environment: +18°C to +23°C and 20 – 70 % RH Dry solid: approx. 69 %

CascoProff Extreme

CascoProff GP

Fast setting floor adhesive with a extreme degree of tack, and very long assembly time. For difficult installations such as coving and fittings.

Fast setting floor and wall adhesive for most types of PVC coverings. Can be heat activated. Roller application with minimal splashing.

Consumption: 3 – 6 m2/liter Assembly time: Wet gluing 0 – 30 minutes, tackifying gluing 30 – 150 minutes Working environment: +18°C to +23°C and 20 – 70 % RH Dry solid: approx. 75 %

Consumption: 3 – 6 m2/liter Assembly time: Wet gluing 0 – 30 minutes, tackifying gluing 30 – 60 minutes Working environment: +18°C to +23°C and 20 – 70 % RH Dry solid: approx. 60 %

Consumption: 3 – 6 m2/liter Assembly time: Wet gluing 0 – 20 minutes, tackifying gluing 20 – 60 minutes Working environment: +18°C to +23°C and 20 – 70 % RH Dry solid: approx. 77 %

Consumption: 3 – 6 m2/liter Assembly time: Wet gluing 0 – 30 minutes Working environment: +18°C to +23°C and 20 – 70 % RH Dry solid: approx. 80 %

PVC 19

Textile

Linoleum

CascoLin

CascoLin Extra

CascoProff Textile

CascoProff TapeFix

Floor adhesive for linoleum with fast setting properties. For wet gluing.

Floor adhesive for linoleum with extra aggressive tack, fast setting properties.

Textile adhesive for difficult gluing textile coverings with good tack and long assembly time.

Water based tape adhesive with tape effect which makes it easier to change textile tiles.

Consumption: 3 – 3,5 m2/liter Assembly time: Wet gluing 0 – 30 minutes Working environment: +18°C to +23°C and 20 – 70 % RH Dry solid: approx. 70 %

Consumption: 3 – 3,5 m2/liter Assembly time: Wet gluing 0 – 30 minutes Working environment: +18°C to +23°C and 20 – 70 % RH Dry solid: approx. 78 %

Consumption: 2 – 4 m2/liter Assembly time: Wet gluing 0 – 30 minutes Working environment: +18°C to +23°C and 20 – 70 % RH Dry solid: approx. 77 %

Consumption: 5 – 20 m2/liter Drying time: approx. 1 hour Assembly time: approx. 1 – 3 hours Working environment: +18°C to +23°C and 20 – 70 % RH Dry solid: approx. 48 %

LinoTex Floor adhesive for linoleum with fast setting properties. For wet gluing. Consumption: 3 – 3,5 m2/liter Assembly time: Wet gluing 0 – 20 minutes Working environment: +18°C to +23°C and 20 – 70 % RH Dry solid: approx. 74 %

linoleum and textile 21

Wood

Rubber

Gummilim

Casco Than 2K

Parkett Elastic Plus

Specially adapted floor adhesive for rubber coverings. Homogeneous and grinded backsides. Only for indoor use. For environment with higher loading and when chemical resistant is needed use Casco Than 2K.

2K polyurthane adhesive for gluing rubber tiles with smooth or grinded backing on dry subfloors. NOTE! Training is needed in most countries.

Parquet adhesive for gluing of rod, lamel and mosaic parquet and wood block. Maximum 85% RH in subfloor. Alkali resistant.

Consumption: 1 – 4 m2/liter Assembly time: Wet gluing 0 – 60 minutes Working environment: +18°C to +23°C and 20 – 70 % RH Dry solid: approx. 100 %

Consumption: 1 – 2 m2/liter Assembly time: Wet gluing 0 – 40 minutes Working environment: +18°C to +23°C and 20 – 70 % RH Dry solid: approx. 100 % RH in subfloor: max. 85 %

Consumption: 3 – 3,5 m2/liter Assembly time: Wet gluing 0 – 20 minutes Working environment: +18°C to +23°C and 20 – 70 % RH Dry solid: approx. 69 %

rubber and wood 23

Special

Special

CascoProff Conductive

CascoProff Solid

iFloor

DraLoss Primer

Conductive floor adhesive for gluing of conductive floor coverings – PVC, linoleum and textile coverings, carpets/tiles of synthetic rubber.

Floor adhesive developed and adapted for subfloors with high alkalinity.

Special adhesive adapted for easy application of PVC, LVT tiles. Gives effective and ergonomic assembly without spots, sticky hands or adhesive leaking through joints.

Primer for easy future replacements of floor coverings and recycling of floor material.

Consumption: 3 – 3,5 m2/liter Assembly time: Wet gluing 0 – 20 minutes Working environment: +18°C to +23°C and 20 – 70 % RH Dry solid: approx. 76 %

Consumption: 3 – 6 m2/liter Assembly time: Wet gluing 0 – 30 minutes Working environment: +18°C to +23°C and 20 – 70 % RH Dry solid: approx. 75 %

Consumption: 1 liter adhesive to approx. 12,5 m² Assembly time: approx. 2 hours Working environment: +18°C to +23°C and 20 – 70 % RH Dry solid: approx. 65 %

Consumption: 8 – 15 m2/liter Drying time: approx. 0,5 - 2 hours Assembly time: approx. 1 – 3 hours Working environment: +18°C to +23°C and 20 – 70 % RH Dry solid: approx. 37 %

CascoPlomb Sealing adhesives for joints between wall and covings of floor coverings – when hygiene demands are high. Consumption: 0,3 liter to approx. 50 meter Drying time: approx. 24 hours Working environment: +18°C to +23°C and 20 – 70 % RH Dry solid: approx. 40 %

special products 25

Name >

< Name

< Name

< Name

< Name

< Name

< Name

Name > < Name

< Name

Simply helpful in Norway Name

Name

Name

Name

Name

Name

Name

Name

Support Team 27