Natural Gas and LP Line
IUSA is present in Mexico, Europe, Asia, the US, Central and South America. • Established in 1939. • Workforce of over 12,000 employees. • Manufacturing facilities established in Mexico and USA. • More than 6,000 diversified products for construction, metering and industry. • 90% of the companies have ISO-9001:200. UL, ANCE, NMX and ASTM certification, and comply with international regulations applicable to export products. • Proprietary infrastructure and logistics with 22 sales and distribution offices in Mexico and the US.
CONTENTS
5 6 12 14 15 16 20 22 25 26
I. PIGTAIL
II. STANDARD SERIES BRASS FITTINGS
III. LIGHT SERIES BRASS FITTINGS
IV. ZAMAC FITTINGS
V. FLEXIBLE GAS HOSES
VI. LOW PRESSURE GAS REGULATORS
VII. HIGH PRESSURE GAS REGULATORS
VIII. BALL VALVES FOR GAS, OIL OR WATER
IX. BY-PASS VALVES FOR GAS OR AIR
X. NEEDLE VALVES FOR GAS OR AIR
XI. GAS STOVE AND OVEN VALVES
XII. GAS TANK VALVES
XIII. GLOBE VALVES AND GAS COUPLERS
XIV. STATIONARY GAS TANK VALVES
XV. GAS CARBURETION TANK VALVES
XVI. GAS LEVEL METERS
XVII. TEMPERATURE CONTROL FOR WATER CONTROLS XVIII. TEMPERATURE CONTROLS (ACCESSORIES) XIX. TORCH FOR DISPOSABLE GAS CANS
28 30 31 32 35 37 38 39 40
CERTIFICATIONS
PIGTAIL CERTIFICATION
FITTINGS CERTIFICATION
REGULATORS CERTIFICATION
VALVES CERTIFICATION
TEMPERATURE CONTROLS CERTIFICATION
TORCHES CERTIFICATION
IUSA | Natural Gas and LP
4
I. PIGTAIL 50 Cm Pigtail (POL To Inverted Flare) General Description
Copper pigtail, POL to inverted flare nut. It is used to connect a regulator to a tank or cylinder.
General Specifications
Pigtail made of 1/4” D.I. copper tube, with brass fittings, POL with left nut (hex. 7/8”) x UNF 7/16” inverted flare.
R3 Code
Model
Measurement
Pieces per Pack
312064
PTI-1
CGA # 510X7/16” - 24 UNF
20
POL To Inverted Nut Flexible Pigtail General Description
Flexible hose pigtail, POL to inverted nut, with weather-resistant plastic handle that allows easy installation on cylinder.
General Specifications
Pigtail made of rubber hose with corrosion-resistant stainless steel mesh, POL CGA 510 (0.880.14 NGO LH) connector to cylinder, 7/16” -18 UNS inverted nut connector to regulator. Operating pressure: 7 kg/cm2 (100 P.S.I. = 0.68 Mpa). Maximum operating pressure: 14 kg/cm2 (200 P.S.I. = 1.36 Mpa). Maximum temperature: 60°C. Minimum resistance to burst 75 kg/cm2 (75 Mpa). Resistance to stress: 90 kg (800N).
R3 Code
Model
Measurement
Pieces per Pack
362496
POL to Inverted Nut Flexible Pigtail
POL CGA 510 / 7/16” -18 UNS Inverted Nut
50
Pigtail Adapter General Description
/ male NPT pigtail adapter x female inverted pigtail nut.
1 4”
General Specifications
Made of 360-alloy machined brass, 1/4” MNPT x 7/16” -24 UMF.
R3 Code
Model
Measurement
Pieces per Pack
336617
APPT-14
1/4” MNPT x 7/16” -24 U≤MF
50
www.iusa.mx
5
IUSA | Natural Gas and LP
II. BRASS FITTINGS - STANDARD SERIES Standard Flare Nut General Description
Standard flare nut, made of 360-alloy machined brass, available in several measurements.
General Specifications
Long flare nut, made of 360-alloy machined brass, available in several measurements.
R3 Code
Model
Measurement
Pieces per Pack
311956 311957 301050 311959
TC-3 TC-4 TC-5 TC-6
1/4” HFLARE 5/16” HFLARE 3/8” HFLARE 1/2” HFLARE
100 100 100 100
Reduced Flare Nut General Description
Reduced flare nut, flared thread to copper tube.
General Specifications
Reduced flare nut, made of 360-alloy machined brass. The first measurement corresponds to the flared thread; the second to the measurement of the tube. Available in different measurements.
R3 Code
Model
Measurement
311971 311972 311973
TR-1 TR-2 TR-3
5/16” FLARE x 1/4” TUBE 3/8” FLARE x 5/16” TUBE 1/2” FLARE x 3/8” TUBE
Pieces per Pack 50 50 50
End Nipple General Description
Male flare to MNPT male flare end nipple. Used for joining copper tube female flare connector to NPT-thread female flare.
General Specifications
Made of 360-alloy machined brass, available in several measurements with a male flare connection by another male NPT connection.
R3 Code 311984 311985 311986 311987 311988 311989 311990 311991 311992 311993 311994 311995
6
Model NT - 2 NT - 3 NT - 4 NT - 8 NT - 9 NT - 10 NT - 11 NT - 12 NT - 13 NT - 14 NT - 16 NT - 17
Measurement 1/4” 1/4” 1/4” 5/16” 5/16” 5/16” 3/8” 3/8” 3/8” 3/8” 1/2” 1/2”
MFLARE x 1/8” NPT MFLARE x 1/4” NPT MFLARE x 3/8” NPT MFLARE x 1/4” NPT MFLARE x 3/8” NPT MFLARE x 1/2” NPT MFLARE x 1/8” NPT MFLARE x 1/4” NPT MFLARE x 3/8” NPT MFLARE x 1/2” NPT MFLARE x 3/8” NPT MFLARE x 1/2” NPT
Pieces per Pack 100 100 100 100 100 100 100 100 100 100 100 100
II. BRASS FITTINGS - STANDARD SERIES
Flare Union Nipple General Description
Male flare to male flare union nipple, for joining two copper tubes with female flare connections.
General Specifications
Union nipple, made of 360-alloy machined brass, available in several measurements, with male flare x male flare connections.
R3 Code 311998 312000 312002 312004
Model NU-3 NU-5 NU-8 NU-10
Measurement 1/4” x 1/4” MFLARE 5/16” x 5/16” MFLARE 3/8” x 3/8” MFLARE 1/2” x 1/2” MFLARE
Pieces per Pack 50 50 100 50
Flare Female Connector General Description
Flare female connector. Male flare to NPT female. Used to join a flare terminal copper tube to an NPT-thread tube.
General Specifications
Flare female connector, made of 377-alloy brass; male flare to NPT female.
R3 Code 311976 311977 311978 311979 311980 311981 311982 311983
Model CN - 7 CN - 8 CN - 10 CN - 11 CN - 12 CN - 13 CN - 17 CN - 18
Measurement 5/16” MFLARE x 3/8” HNPT 5/16” MFLARE x 1/2” HNPT 3/8” MFLARE x 1/8” HNPT 3/8” MFLARE x 1/4” HNPT 3/8” MFLARE x 3/8” HNPT 3/8” MFLARE x 1/2” HNPT 1/2” MFLARE x 3/8” HNPT 1/2” MFLARE x 1/2” HNPT
Pieces per Pack 50 50 50 50 50 50 50 50
www.iusa.mx
7
IUSA | Natural Gas and LP II. BRASS FITTINGS - STANDARD SERIES
90-Degree Stove Elbow General Description
Ninety-degree stove elbow with male flare to female NPT thread.
General Specifications
Stove elbow, made of 377-alloy cast brass, available in several measurements, male flare x NPT female.
R3 Code 312012 312014 312016 312020
Model CE - 3 CE - 4 CE - 5 CE - 8
Measurement 3/8” MFLARE x 1/8” HNPT 3/8” MFLARE x 3/8” HNPT 3/8” MFLARE x 1/2” HNPT 1/2” MFLARE x 1/2” HNPT
Pieces per Pack 50 50 50 50
End Elbow General Description
End elbow with male flare thread to male NPT thread. Used for joining copper tube with NPT thread flare connection.
R3 Code 312024 312032 312034 312036 312040
Model CT - 3 CT - 7 CT - 8 CT - 9 CT - 11
Measurement 1/4” MFLARE x 1/4” NPT 3/8” MFLARE x 1/4” NPT 3/8” MFLARE x 3/8” NPT 3/8” MFLARE x 1/2” NPT 1/2 “ MFLARE x 3/8” NPT
Pieces per Pack 50 50 50 50 50
90-Degree Flare Union Elbow General Description
Ninety-degree flare union elbow with two male flared threads.
General Specifications
Made of 377-alloy cast brass, available in several male flare measurements.
8
R3 Code
Model
Measurement
312046 312048
CU-2 CU-3
5/16” MFLARE x 5/16” MFLARE 3/8” MFLARE x 3/8” MFLARE
Pieces per Pack 50 50
II. BRASS FITTINGS - STANDARD SERIES
Female Plug General Description
Female plug for male flared thread.
General Specifications
Female plug, made of 360-alloy machined brass, available in several measurements, flared female thread.
R3 Code
Model
Measurement
312007
TH-3
3/8” HFLARE
Pieces per Pack 50
Flare Male Plug General Description
Male plug for female flared thread.
General Specifications
Male plug, made of 360-alloy machined brass, available in several measurements, male flared thread.
R3 Code
Model
Measurement
Pieces per Pack
312011
TM-3
3/8” MFLARE
50
www.iusa.mx
9
IUSA | Natural Gas and LP II. BRASS FITTINGS - STANDARD SERIES
Male Branch Tee General Description
Male branch tee with two male flared threads and a central male NPT thread.
General Specifications
Male branch tee, made of 377-alloy machined brass, available in a single measurement, two 3/8” male flared threads and a central 3/8” male NPT thread.
R3 Code
Model
Measurement
Pieces per Pack
312056
TTC-2
3/8” MFLARE x 3/8” MFLARE x 3/8” MNPT
50
Flare Union Tee General Description
Union tee with three male flared threads.
General Specifications
Union tee, made of 377-alloy cast brass, available in several measurements, three flared threads.
R3 Code
Model
Measurement
Pieces per Pack
312052 312053 312054
TU-1 TU-2 TU-3
1/4” MFLARE x 1/4” MFLARE x 1/4” MFLARE 5/16” MFLARE x 5/16” MFLARE x 5/16” MFLARE 3/8” MFLARE x 3/8” MFLARE x 3/8” MFLARE
50 50 50
Threaded Pol Tailpiece General Description
POL tailpiece for joining a cylinder valve to a 1/4” MNPT thread.
General Specifications
POL tailpiece, made in 360-alloy machined brass, POL x 1/4” MNPT thread, 6cm long.
R3 Code
Model
Measurement
312063
PPR-1
1/4” MNPT
10
Pieces per Pack 50
II. BRASS FITTINGS - STANDARD SERIES
Left-Hand Nut For Pigtail Or POL General Description
Left-hand nut for pigtail or POL.
General Specifications
Left-hand nut for pigtail or POL, made of 360-alloy machined brass, 7/8” Hex left-hand thread, 0.880 NGO.
R3 Code
Model
Measurement
Pieces per Pack
311970
TIP-1
0,880 - 14NGO - LH 7/8” Hex
100
Compression Sleeves General Description
Brass compression sleeves.
General Specifications
Made of 360-alloy brass, available in 1/4” measurement.
R3 Code
Model
Measurement
312059
BA-3
1/4”
Pieces per Pack 500
Compression Nut General Description Brass compression nut.
General Specifications
Compression nut, made of 360-alloy machined brass, available in several measurements.
R3 Code
Model
Measurement
Pieces per Pack
311951
TB-3
1/4” HUNF
100
www.iusa.mx
11
IUSA | Natural Gas and LP
III. BRASS FITTINGS - LIGHTWEIGHT SERIES Lightweight Flare Nut General Description
/ flare nut.
3 8”
General Specifications
Made of 360-alloy machined brass.
R3 Code
Model
Measurement
311958
TC-5
3/8” HFLARE
Pieces per Pack 100
Male Connector General Description
Male connector, flare male to NPT male, used for joining a flared thread copper tube to an NPT thread.
General Specifications
Made in 360-alloy brass, available in several measurements.
R3 Code
Model
Measurement
320430 320431 320432 320433
NTL-12L NTL-13L NTL-14L NTL-17L
3/8” MFLARE x 1/4” MNPT 3/8” MFLARE x 3/8” MNPT 3/8” MFLARE x 1/2” MNPT 1/2” MFLARE x 1/2” MNPT
Pieces per Pack 100 100 100 50
Flare To Solder Tube Connector General Description
Flared thread to solder copper tube connector.
General Specifications
Made of 360-alloy brass, available in several measurements.
R3 Code
Model
Measurement
313102 313120
CFS-1 CFS-2
3/8” MFLARE x 1/2” SOLDER 1/2” MFLARE x 1/2” SOLDER
12
Pieces per Pack 50 50
III. BRASS FITTINGS - LIGHTWEIGHT SERIES
Flare Female Connector General Description
Male flare to NPT female connector.
General Specifications
Made of 360-alloy machined brass. Several measurements.
R3 Code 320428 320429 320423 320424 320425 320426 320427
Model CNL - 2L CNL - 7L CNL - 10L CNL - 11L CNL - 12L CNL - 13L CNL - 18L
Measurement 1/4” FLARE x 1/4” HNPT 5/16” FLARE x 3/8” HNPT 3/8” FLARE x 1/8” HNPT 3/8” FLARE x 1/4” HNPT 3/8” FLARE x 3/8” HNPT 3/8” FLARE x 1/2” HNPT 1/2” FLARE x 1/2” HNPT
Pieces per Pack 50 50 50 50 50 50 50
Hose Barb Adapter General Description
Hose barb to NPT male tube adapter.
General Specifications
Made of 360-alloy brass, available in several measurements.
R3 Code
Model
Measurement
Pieces per Pack
336597 336598 336604
CM-1414 CM-3838 CM-3814
1/4” MNPT x 1/4” HOSE BARB 3/8” MNPT x 3/8” HOSE BARB 3/8” MNPT x 1/4” HOSE BARB
50 50 50
Swivel Adapter General Description
Female flare swivel nut to male hose barb.
General Specifications
Made of 360-alloy machined brass, from female flare to male hose barb.
R3 Code 336607 336608 339082
Model CG1414 CG3838 TL3838
Measurement 1/4” HFLARE x 1/4” BARB 3/8” HFLARE x 3/8” BARB 3/8” HFLARE x 3/8” BARB
Pieces per Pack 50 50 50
www.iusa.mx
13
IUSA | Natural Gas and LP
IV. ZAMAC FITTINGS 90-Degree Barb To NPT Female Elbow General Description
90-degree elbow, barb to NPT female.
General Specifications
90-degree elbow, made of Zamac, several measurements, female NTP to hose barb.
R3 Code
Model
Measurement
323977
CM-3838
3/8” HNPT x 3/8” hose barb
Pieces per Pack 50
Hose Barb Pivot To Male NPT Adapter General Description
Hose barb pivot male NPT adapter.
General Specifications
Straight hose barb pivot, made of Zamac, MNPT x hose barb.
R3 Code
Model
Measurement
336618
PZ-3838
3/8” MNPT x 3/8” hose barb
14
Pieces per Pack 50
V. FLEXIBLE FITTINGS FOR GAS Flexible Fittings For Gas General Description
Flexible gas connector with stainless steel mesh, from 0.60m to 5.00 in length.
General Specifications
Nitrile rubber hose, stainless steel mesh jacket, heat-resistant up to 60°C. 3/8” x 3/8” flare fittings, from 0.60m to 5.00 in length.
R3 Code 398065 398066 398067 398068 398069 398070 398071
Length 0.60 m 1.00 m 1.50 m 2.00 m 3.00 m 4.00 m 5.00 m
Fittings 3/8” x 3/8” FLARE 3/8” x 3/8” FLARE 3/8” x 3/8” FLARE 3/8” x 3/8” FLARE 3/8” x 3/8” FLARE 3/8” x 3/8” FLARE 3/8” x 3/8” FLARE
Pieces per Pack 10 10 10 10 5 5 5
www.iusa.mx
15
IUSA | Natural Gas and LP
VI. LOW-PRESSURE GAS REGULATORS Two-Outlet Mod. 201 Regulator With Pigtails General Description
Low-pressure gas regulator with two pigtails, for two gas cylinders.
General Specifications
Low-pressure gas regulator, 11” W.C. (28 gr/cm2), with 2 POL pigtails with left-hand nut, 2 flare nuts and one tube connector, one-stage, for two cylinders, with manual change valve.
R3 Code
Model
Inlet / Outlet
398087
201
2 POL PIGTAILS / 3/8” HNPT + 3/8” TUBE CONNECTOR X 3/8” FLARE
Pieces per Pack 10
Two-Outlet Gas Regulator General Description
Two-outlet low-pressure gas Mod. 2001 regulator with integrated manual change valve for two gas cylinders of any capacity.
General Specifications
Low-pressure 11” W.C. (28 gr/cm2) gas regulator with integrated manual change valve, 7/16” 24 UNF left-hand thread inlets for two pigtails, and one 3/8” HNPT outlet.
R3 Code 323986 323999
Model R-2001-A00 R-2001-A2VB
Inlet / Outlet Pieces per Pack (2) 7/16” - 24 FOR PIGTAILS / 3/8” HNPT 40 2 PIGTAILS / 3/8” MNPT TUBE 20 CONNECTOR x 3/8” FLARE + 2 3/8” FLARE NUTS
Single Mod. 102 Gas Regulator General Description
Single Mod. 102 regulator for low-pressure gas.
General Specifications
One-stage low-pressure 11” W.C. (28 gr/cm2) regulator for gas cylinders or stationary tanks.
R3 Code 311786 311788
16
Model 102 W/POL 102 W/O POL
Inlet / Outlet POL / 3/8” HNPT 1/4” HNPT / 3/8” HNPT
Pieces per Pack 20 20
VI. LOW-PRESSURE GAS REGULATORS
Single Mod. 3001 Gas Regulator General Description
One-stage gas regulator, used in low-pressure, stationary tank or cylinder installations any capacity.
General Specifications
Low-pressure, one-stage 11” W.C. (28 gr/cm2) regulator. For home use, 200,000btu/ hr capacity. Handled with soft POL tailpiece and handle, with hard POL tailpiece, or just with 1/4” HNPT inlet connector and 1/4” HNPT outlet.
R3 Code
Model
Inlet / Outlet
Pieces per Pack
324007 324005 324006
R-3001-A00 R-3001-AZ0 R-3001-AS0
1/4” HNPT / 3/8” HNPT POL / 3/8” HNPT POL AND HANDLE / 3/8” HNPT
40 40 40
Single Mod. 3100 Gas Regulator General Description
Single model 3100 low-pressure gas regulator for home use.
General Specifications
Home use, low-pressure 11” W.C. (28 gr/cm2) gas regulator with one 1/4” HNPT inlet connection and 3/8” HNPT outlet, 180,000 btu/hr capacity.
R3 Code
Model
Inlet / Outlet
Pieces per Pack
324011
R-3100-A00
1/4” HNPT / 3/8” HNPT
40
www.iusa.mx
17
IUSA | Natural Gas and LP VI. LOW-PRESSURE GAS REGULATORS
Single Mod. 3101 Gas Regulator General Description
Single Mod. 3101 low-pressure gas regulator for domestic use.
General Specifications
Single stage regulator. For low-pressure 11” W.C. (28 gr/cm2) domestic use, 180,000 btu/hr capacity. With sogt POL tailpiece and handle, or with hard POL tailpiece and 3/8” HNPT outlet.
R3 Code
Model
Inlet / Outlet
324012 324013
R-3101-AZ0 R-3101-AS0
POL / 3/8” HNPT POL and HANDLE / 3/8” HNPT
Pieces per Pack 40 40
Single Mod. 5000 Gas Regulator For One Device General Description
Single Mod. 5000 gas regulator for one consumption device.
General Specifications
One-stage regulator for one consumption device in low-pressure, 11” W.C. (28 gr/ cm2) gas installations, with soft POL tailpiece and handle, or hard POL tailpiece and 3/8” HNPT outlet.
R3 Code
Model
324029 324020 324024
R-5000-A00 R-5000-AZ0 R-5000-AS0
18
Inlet / Outlet 1/4” HNPT / 3/8” HNPT POL / 3/8” HNPT POL AND HANDLE / 3/8” HNPT
Pieces per Pack 20 20 20
VI. LOW-PRESSURE GAS REGULATORS
Single Mod. 5005 Gas Regulator General Description
Single, Mod. 5005 low-pressure gas regulator with POL and plastic handle on the inlet, multiple-length yellow hose, swivel connector on the outlet.
General Specifications
Single, Mod. 5005, 11” W.C. (28 gr/cm2) low-pressure gas regulator, with POL and plastic handle on inlet and multiple-length yellow hose and 3/8” female flare swivel connector on the outlet.
R3 Code
Model
Inlet / Outlet
Pieces per Pack
324114
R-5005-ASE16FF6
POL AND HANDLE / HOSE
20
Single Stage Mod. 2403-C2 Gas Regulator General Description
Model 2403-C2 low-pressure gas regulator, used as a single stage regulator, with POL.
General Specifications
Low-pressure 11” W.C. (28 gr/cm2) regulator used as a single stage, gray, POL inlet and left-hand nut, and 1/2” HNPT capacity outlet.
R3 Code
Model
Inlet / Outlet
311789
2403-C2
POL / 1/2” HNPT
Pieces per Pack 16
Second Stage Mod. 2403-C4 Gas Regulator General Description
Second-stage gas regulator, 10 PSI (0.7 kg/cm2) inlet and low-pressure 11” W.C. (28 gr/cm2) outlet, gray, 1/2” HNPT inlet, and 1/2” HNPT outlet.
General Specifications
Low-pressure 11” W.C. (28 gr/cm2) gas regulator, used as a second stage, gray, 1/2” HNPT inlet, 1/2” HNPT outlet.
R3 Code
Model
Inlet / Outlet
311790
2403-C4
1/2” HNPT / 1/2” HNPT
Pieces per Pack 16
www.iusa.mx
19
IUSA | Natural Gas and LP
VII. HIGH-PRESSURE GAS REGULATORS Mod. 7000 Gas Regulator General Description
High-pressure, model 7000 gas regulator. May be used with portable or lightweight industrial equipment, as well as first stage.
General Specifications
High-pressure gas regulator.1/4” HNPT inlet, 1/4” HNPT outlet. Factory calibrated to 20 PSI. Special calibrations from 1 to 30 PSI.
R3 Code
Model
324211 324208 324210
R-7000-A00 R-7000AZ0 R-7000AS0
Inlet / outlet 1/4” HNPT / 1/4” HNPT POL / 1/4” HNPT POL AND HANDLE / 1/4” HNPT
Pieces per Pack 20 20 20
Mod. 7003 Gas Regulator General Description
Manual adjustment, model 7003 high-pressure gas regulator. May be used with portable or lightweight industrial equipment.
General Specifications
Manual adjustment, high-pressure gas regulator, from 0 to 10 PSI. With soft POL and handle connector, with POL, or only x 1/4” HNPT.I outlet.
R3 Code
Model
324407
R-7003-A00
20
Inlet / Outlet
Pieces per Pack
1/4” HNPT / 1/4” HNPT
20
VII. HIGH-PRESSURE GAS REGULATORS
Mod. 7008 Gas Regulator General Description
Model 7008 high-capacity, manual adjustment, high-pressure gas regulator. May be used as a first-stage regulator in remote installations or as a high-pressure regulator with lightweight industrial equipment.
General Specifications
High-pressure, manual adjustment regulator, from 0 to 40 PSI and high capacity (up to 2’800,000 BTU/hr). With 1/4” HNPT inlet x 1/4” HNPT outlet and 1/4” HNPT manometer port (manometer not included).
R3 Code
Model
339313
R-7008-C00
Inlet / Outlet
Caliber
Pieces per Pack
1/4” HNPT / 1/4” HNPT
0-40 PSI
10
Mod. 2403 S4 And U4 Gas Regulator General Description
Mod. 2403-S4 and U4 high-pressure gas regulator, may be used as a first stage regulator or with high-pressure consumption equipment.
General Specifications
High-pressure regulator with 1-5 PSI outlets or 10 to 15 PSI, respectively, at an inlet pressure of 100 PSI. Red. 1/2” HNPT inlet x 1/2” HNPT outlet.
R3 Code
Model
311791 311792
2403-S4 2403-U4
Inlet / Outlet 1/2” HNPT / 1/2” HNPT 1/2” HNPT / 1/2” HNPT
Caliber
Pieces per Pack
1-5 PSI 10-15 PSI
www.iusa.mx
16 16
21
IUSA | Natural Gas and LP
VIII. WATER, OIL OR GAS BALL VALVES Standard Threaded Ball Valve, Lever Handle General Description
High-pressure, W.O.G. (Water, Oil, Gas) 600 PSI (42 kg/cm2), full-port threaded ball valve, open and close with a quarter of a turn (90°), UL certified for flammable gas, gas and natural, features a lever handle that enables easy operation.
General Specifications
High-pressure, W.O.G. (Water, Oil, Gas) 600 PSI (42 kg/cm2), full-port threaded ball valve made of nickel-plated cast brass, open and close with a quarter of a turn (90°), high-durability Teflon® seat, steel lever, UL certified for flammable gas, like gas and natural gas.
R3 Code 311830 311831 311826 311827 311828 311829
Model 1/2” HNPT 3/4” HNPT 1” HNPT 1 1/4” HNPT 1 1/2” HNPT 2” HNPT
Pieces per Pack 20 20 10 5 5 5
Solder Standard Ball Valve, Lever Handle General Description
High-pressure, W.O.G. (Water, Oil, Gas) 600 PSI (42 kg/cm2), full-port solder ball valve, open and close with one quarter of a turn (90°). UL certified for flammable gas, gas and natural, features a lever handle that enables easy operation.
General Specifications
High-pressure, W.O.G. (Water, Oil, Gas) 600 PSI (42 kg/cm2), full-port ball valve made of cast brass, high-durability Teflon® seat, steel lever, UL certified for flammable gas, like gas and natural gas.
R3 Code 318644 311842 311741
22
Model 1/2” F SOLDER 3/4” F SOLDER 1” SOLDER
Pieces per Pack 20 20 10
VIII. WATER, OIL OR GAS BALL VALVES
Standard Threaded Ball Valve, Drop-Type Handle General Description
High-pressure, W.O.G. (Water, Oil, Gas) 600 PSI (42 kg/cm2), full-port threaded ball valve, open and close with a quarter of a turn (90°), UL certified for flammable gas, gas and natural, features a drop-type handle that allows easy grip and requires little space for open-close operation.
General Specifications
High-pressure, W.O.G. (Water, Oil, Gas) 600 PSI (42 kg/cm2), full-port threaded ball valve made of nickel-plated cast brass, open and close with a quarter of a turn (90°) with aluminum drop-type handle, high-durability Teflon® seat, steel lever, UL certified.
R3 Code 362456 362458
Model 1/2” HNPT 3/4” HNPT
Pieces per Pack 10 8
Solder Standard Ball Valve, Drop-Type Handle General Description
High-pressure, W.O.G. (Water, Oil, Gas) 600 PSI (42 kg/cm2), full-port solder ball valve, open and close with one quarter of a turn (90°). UL certified for flammable gas, gas and natural. Features a drop-type handle that allows easy grip and requires little room for open-close operation.
General Specifications
High-pressure, W.O.G. (Water, Oil, Gas) 600 PSI (42 kg/cm2), full-port ball valve made of nickel-plated cast brass, one quarter of a turn (90°) open and close with a drop-type handle, high-durability Teflon® seat, steel lever, UL certified.
R3 Code 362457 362459
Model 1/2” F SOLDER 3/4” F SOLDER
Pieces per Pack 10 8
www.iusa.mx
23
IUSA | Natural Gas and LP VIII. WATER, OIL OR GAS BALL VALVES
Compact Threaded Ball Valve General Description
High-pressure, W.O.G. (Water, Oil, Gas) 400 PSI (28 kg/cm2), full-port threaded ball valve, open and close with a quarter of a turn (90°), because of its features, it may be used for flammable gases, like gas and natural gas.
General Specifications
High-pressure, W.O.G. (Water, Oil, Gas) 400 PSI (28 kg/cm2), full-port threaded ball valve made of nickel-plated cast brass, open and close with a quarter of a turn (90°), high-durability Teflon® seat.
R3 Code 377185 377187
Model 1/2” HNPT 3/4” HNPT
Pieces per Pack 10 10
Solder Compact Ball Valve General Description
High-pressure, W.O.G. (Water, Oil, Gas) 400 PSI (28 kg/cm2), full-port solder ball valve, open and close with one quarter of a turn (90°). Because of its features, it may be used for flammable gases, like gas and natural gas.
General Specifications
High-pressure, W.O.G. (Water, Oil, Gas) 400 PSI (28 kg/cm2), full-port ball valve made of cast brass, Teflon® seat. High-durability.
R3 Code 377186 362638
24
Model 1/2” F SOLDER 3/4” F SOLDER
Pieces per Pack 10 10
IX. BY- PASS VALVES FOR GAS AND AIR By-Pass Valve General Description
Low-pressure (28 gr/cm2) gas or air by-pass valve.
General Specifications
Low-pressure by-pass valve, made of 360-alloy brass, may be used with gas or natural gas, opens and closes with 1/4 of a turn.
R3 Code 311871 311872 311873 311874 311875 311876 311877
Measurements 3/8” MFLARE x 3/8” MFLARE 1/2” MFLARE x 1/2” MFLARE 3/8” MFLARE x 1/2” SOLDER 1/2” MFLARE x 1/2” SOLDER 1/2” SOLDER x 1/2” SOLDER 1/2” MFLARE x 1/2” MNPT 3/8” MFLARE x 1/2” MNPT
Other With 2 flare nuts With 2 flare nuts With 1 flare nut With 1 flare nut Without nuts With 1 flare nut With 1 flare nut
Pieces per Pack 10 10 10 10 10 10 10
www.iusa.mx
25
IUSA | Natural Gas and LP
X. NEEDLE VALVES FOR GAS OR AIR Needle Valves General Description
Series 200 needle valve for low or high pressure, fine thread, for gas or air.
General Specifications
Needle valve with fine thread connections for low or high pressure, fine thread for gas or air. Several measurements available.
R3 Code 324272 324274 324275 324277 324279 324351 324326 324327 324328 324282 324284 324273 324325 324276 324278 324280 324281 324326 324327 324328 324282 324285
26
Model V - 201 - A00 V - 202 - A00 V - 203 - A00 V - 204 - A00 V - 205 - A00 V - 206 - A00 V - 207 - A00 V - 208 - A00 V - 209 - A00 V - 210 - A00 V - 213 - A00 V - 201 - C00 V - 202 - C00 V - 203 - C00 V - 204 - C00 V -205 - C00 V - 206 - C00 V - 207 - C00 V - 208 - C00 V - 209 - C00 V - 210 - C00 V - 213 - C00
Measurement 1/4” HNPT x 1/4” HNPT 3/8” MFLARE x 3/8” MFLARE 3/8” MFLARE x 1/4” HNPT 1/4” MNPT x 1/4” HNPT 1/4” MNPT x 1/4” MNPT 1/4” HNPT x 1/4” MNPT 1/4” MNPT x 9/16” LEFT-HAND M 9/16” LEFT-HAND M x 1/4” MNPT 9/16” LEFT-HAND M x 1/8” MNPT 1/4” HNPT x 1/8” MNPT 1/4” MNPT x 3/8” FLARE 1/4” HNPT x 1/4” HNPT 3/8” MFLARE x 1/4” HNPT 1/4” MNPT x 3/8” FLARE 1/4” MNPT x 1/4” HNPT 1/4” MNPT x 1/4” MNPT 1/4” HNPT x 1/4” MNPT 1/4” MNPT x 9/16” LEFT-HAND M 9/16” LEFT-HAND M x 1/4” MNPT 9/16” LEFT-HAND M x 1/8” MNPT 1/4” HNPT x 1/8” MNPT 1/4” MNPT x 3/8” FLARE
Pieces per Pack 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
X. NEEDLE VALVES FOR GAS OR AIR
Needle Valves
www.iusa.mx
27
IUSA | Natural Gas and LP
XI. GAS STOVE AND OVEN VALVES Simple Mod. E-305 Stove Valve General Description
Simple stove valve with continuous flame increase, with optional safety mechanism, operating pressure 28 gr/cm2. 1/8” MNPT inlet and #70 idle jet outlet.
General Specifications For stoves, with optional safety mechanism, operating pressure 28 gr/cm2, inlet, #70 idle jet outlet. Made of brass.
R3 Code 311843 311844
Extension Inlet/Outlet 305 SIMPLE VALVE 1/8” MNPT / #70 idle jet 305 VALVE W/SAFETY LOCK 1/8” MNPT / #70 idle jet
/ NPT
1 8”
Pieces per Pack 100 100
Zamac Flanged Stove Valve General Description
Simple Zanac stove valve with mounting flange, operating pressure 28 gr/cm2, 2 flame measurements, with safety mechanism.
General Specifications
Simple Zamac stove valve, operating pressure 28 gr/cm2, 2 flame measurements, with safety mechanism, features threaded mounting flange and 1/8” MNPT inlet connection, and #71 idle jet.
R3 Code 399342
Inlet/Outlet 1/8” MNPT / #71 idle jet
Pieces per Pack 100
Oven Valve General Description Oven valve with continuous flame increase, sleeve and nut outlet.
/ MNPT inlet and 3/8” compression
1 8”
General Specifications
Inlet connection: 1/8”-27 NPT; 3/8” compression sleeve and nut outlet. Operating pressure: 28 gr/cm2. Maximum operating temperature: 120°C. Safety mechanism that prevents accidental opening. Made of brass.
R3 Code 311847
28
Inlet/Outlet 1/8” MNPT / COMPRESSION NUT FOR 3/8” TUBE
Pieces per Pack 50
XI. GAS STOVE AND OVEN VALVES
Upper Burner Valve (Grill) General Description Burner valve with continuous flame increase, sleeve and nut outlet.
/ MNPT inlet and 1/4” compression
1 8”
General Specifications
/ NPT inlet and 1/4” outlet, operating pressure 28 gr/cm2, maximum operating
1 8”
temperature 120°C, safety mechanism that prevents accidental opening, made of brass.
R3 Code 311852
Length Extension Inlet/Outlet 46 1/8” MNPT / COMPRESSION NUT FOR 3/8” TUBE
Pieces per Pack 50
www.iusa.mx
29
IUSA | Natural Gas and LP
XII. GAS CYLINDER VALVES POL Valve For Portable Gas Cylinders General Description
Gas cylinder valve, POL system, NOM and UL approved.
General Specifications
Valve for 2 to 45 kg portable canisters, POL system. This valve features a safety valve that opens at 375 PSI and its relief capacity is 10m3/min 3/4” MNPT connection to cylinder and (POL CGA 510) 0.885”-14 NGO L.H. service outlet.
R3 Code 395834
Model 848 IUSA
System POL
Pieces per Pack 40
POL Valve For Portable Gas Cylinders (Export) General Description
Gas cylinder valve, POL system, INCOTEC and UL approved.
General Specifications
Valve for 2 to 45 kg portable canisters, POL system (CGA 510, 0.885”-14 NGO L.H.). This valve features a screw on top of the handle that allows changing it. 3/4” MNGT connection to cylinder. It features a safety valve that opens at 375 PSI and its relief capacity is 10m3/min.
R3 Code 306339
Model 858 IUSA
System POL (EXPORT)
Pieces per Pack 40
Type 1 (ACME) Valve For Portable Gas Cylinders General Description
Type-1 (ACME) system gas cylinder valve that connects by hand (no tools required) by means of type-1 connection, like CRP-1B (F) connector, and closes the flow of gas in case of fire or in the event of an excess in the demand of flow. U.L.-approved. Can also be connected to a POL for filling or service (without the safety features). UL approved and for use in Mexico.
General Specifications
Recommended for portable cylinders containing from 2 to 45 kg of gas. The safety valve is calibrated to 375 PSI and has a relief capacity of 10m3/hr It is connected to the cylinder by means of a 3/4” MNGT thread. Service connection is POL-compatible type 1 (ACME).
R3 Code 363455
30
Model 868 IUSA
System TYPE 1 (ACME/POL)
Pieces per Pack 40
XIII. GLOBE VALVES AND GAS COUPLERS Globe Valve General Description
High-pressure, 400 PSI (28 kg/cm2) globe valve. UL approved.
General Specifications
Nodular-iron-made globe valve, brass stem, operating pressure up to 400 PSI (28 kg/cm2), W.O.G. (Water, Oil, Gas), UL-certified.
R3 Code 311882 311883 395811
Model 1/2” HNPT 3/4” HNPT 1” HNPT
Pieces per Pack 10 10 10
Fill Coupler General Description Fill coupler for gas lines.
General Specifications Fill coupler for gas, made of brass, for 1 MNPT line connection thread.
R3 Code 311893
/ ACME threaded fill valves, features 3/4”
3 4”
Measurement 1 3/4” ACME x 3/4” MNPT
Pieces per Pack 50
www.iusa.mx
31
IUSA | Natural Gas and LP
XIV. STATIONARY GAS TANK VALVES Mod. 2028 Fill Valve General Description Fill valve for stationary gas tanks with 1 the tank. Mod. 2028.
/ ACME thread and 1 1/4” NPT thread to
3 4”
General Specifications
1 3/4” ACME coupling to gas hose and 1 1/4” NPT to tank. Combination of two check valves (fill and counter-pressure), fill capacity of 265 liters per minute (approx.). NOM and UL certified.
R3 Code 311809
Model 2028
Connection to Tank 1 1/4” MNPT
Service Connection 1 3/4” ACME
Pieces per Pack 20
Mod. 2043 Service Valve General Description
Stationary tank service valve with POL service thread, 3/4” MNPT connection to cylinder, and maximum fill valve with brass nut and deflector (flange) included.
General Specifications
/ MNPT thread coupling to tank and maximum fill deflector, manual operation hand wheel to open and close, UL certified. 3 4”
R3 Code
Model
Length of deflector
338493 315543
2043-15 2043-26
15 cm 26 cm
Connection to Tank 3/4” MNPT 3/4” MNPT
Service Connection POL POL
Pieces per Pack 20 20
Mod. 2007 External Spring Safety Valve General Description
Safety valve with external spring for stationary tanks and gas lines.
General Specifications
Safety valve with 3/4” MNPT thread coupling to tank, relief capacity of 50 m3/min (air), aperture pressure 250 PSI. Spring outside tank, NOM and UL certified. Used only in the replacement market.
R3 Code
Model
311805
2007
32
Connection to Tank or Line 3/4” MNPT
Relief Capacity 49.6 m3/min 17SUCFM
Pieces per Pack 20
XIV. STATIONARY GAS TANK VALVES
Mod. 2017 Internal Spring Safety Valve General Description
Coupling to tank with 3/4” MNPT thread, relief capacity of 51 m3/min (1,800 CFM), aperture pressure 250 PSI, spring inside tank, NOM and UL certified.
General Specifications
Coupling to tank with 1” MNPT thread, relief capacity of 51 m3/min (1,800 CFM), aperture pressure 250 PSI, spring inside tank, NOM and UL certified.
R3 Code
Model
399316
2017
Connection to Tank or Line 3/4” MNPT
Relief Capacity 51 m3/min / 1,800 CFM
Tank Capacity 500 to 1,000 liters
Pieces per Pack 20
Mod. 2022 Internal Spring Safety Valve General Description
Safety valve with internal spring, 3/4” MNPT thread, for carburetion and/or stationary gas tank. Ensures an adequate relief in the event of excess pressure, thus avoiding the risk of accidents. Closes automatically when pressure returns to a safe level.
General Specifications
Coupling to tank with 1” MNPT thread, relief capacity of 22.24 m3/min (848 CFM), aperture pressure 250 PSI, spring inside tank, NOM and UL certified.
R3 Code 311808
Model 2022
Connection to Pieces per Relief Capacity Tank Capacity Tank or Line Pack 1” MNPT 22.24 m3/min / 848 CFM 300 liters 20
www.iusa.mx
33
IUSA | Natural Gas and LP XIV. STATIONARY GAS TANK VALVES
2009 Vapor Return Valve General Description
Vapor return valve for stationary gas tanks.
General Specifications
1 1/4” ACME vapor return coupling with no-return valve, tank, NOM and UL certified.
R3 Code
Model
311806
2009
Connection to Tank 3/4” MNPT
/ NPT thread coupling to
3 4”
Service Connection
Pieces per Pack
1 1/4” ACME
20
Mod. 2010 Drain Valve (Check Lock) General Description
Mod. 2010 drain valve or check lock for stationary tanks.
General Specifications
/ MNPT thread coupling to tank, with built-in no-return valve, and 3/4” HNPT thread
3 4”
outlet.
R3 Code 311807
34
Connection to Tank 3/4” MNPT
Outlet Connection 3/4” HNPT
Pieces per Pack 20
XV. GAS CARBURETION TANK VALVES Mod. 2018 Carburetion Fill Valve General Description
Fill valve for carburetion tank. Features double check valve, 1 3/4” ACME thread and 3/4” MNPT thread.
General Specifications
Carburetion fill valve, with upper fill check valve and lower counter-pressure check valve, with 1 3/4” ACME thread and coupling to tank with 3/4” NPT thread. NOM and UL certified.
R3 Code Model 311813 2018
Connection to Tank 3/4” MNPT
Service Connection 1 3/4” ACME
Pieces per Pack 20
Mod. 2015 Carburetion Service Valve General Description
Serve valve for gas tanks used in carburetion systems that allows control of gas flow to combustion system or allows cutting off supply altogether with no risk of leaks. Model 2015.
General Specifications
Service valve for gas tanks, coupling to tank with 3/4” NPT thread, 3/8” flare outlet, integrated excess-flow valve hand wheel for manual operation. NOM and UL certified.
R3 Code 311812
Model 2015
Connection to Tank 3/4” MNPT
Service Connection Pieces per Pack 3/8” MFLARE 20
Mod. 2022 Internal Spring Safety Valve General Description
Internal spring safety valve, 1 3/4” ACME x 1” MNPT threads, for carburetion and/or 300-liter capacity gas stationary tanks. It ensures an adequate relief in the event of excess pressure, thus avoiding the risk of accidents. It closes automatically upon returning to safe levels.
General Specifications
Internal spring valve, 1 3/4” ACME x 1” MNPT threads. Relief capacity: 22.24 m3/min (848 CFM). Aperture pressure: 250 PSI. Spring inside tank. NOM and UL certified.
R3 Code
Model
311808
2022
Connection to Relief Capacity Tank or Line 1” MNPT 22.24 m3/min / 848 CFM
Tank Capacity 300 liters
www.iusa.mx
Pieces per Pack 20
35
IUSA | Natural Gas and LP XV. GAS CARBURETION TANK VALVES
Mod. 2006 Maximum Fill Valve General Description
Maximum fill valve for carburetion tanks that allows to safely determine the maximum level of liquid gas. Model 2006.
General Specifications
Maximum fill valve for carburetion tanks, coupling to tank with 1/4” NPT thread.
R3 Code
Model
Connection to Tank
311811
2006
1/4” MNPT
36
Pieces per Pack 20
XVI. GAS LEVEL INDICATORS Stationary Tank Level Indicator General Description
Level indicator for stationary gas tanks.
General Specifications
Level indicator for stationary gas tanks. Unbreakable plastic, replaceable dial. Movement of indicator needle is caused by magnetic flow. 24” length, vertical installation, UL certified.
R3 Code 311820
Model 2011-24
Length 24”
Connection to Tank BRIDLED
Pieces per Pack 20
www.iusa.mx
37
IUSA | Natural Gas and LP
XVII. TEMPERATURE CONTROLS FOR WATER CONTROLS IUSATROL General Description
Automatic IUSATROL thermostat, designed to control water temperature in storage and direct-flow water heaters.
General Specifications
Made of aluminum, 1/2” HNPT gas inlet connection, Temperature control from 30° to 70°C ± 5°C.
R3 Code Inlet 495066 399312
1/2” HNPT 1/2” HNPT
Outlet to burner 3/8” HNPT 3/8” HNPT
/ HNPT outlet connection.
3 8”
Outlet to pilot 7/16” UNS thread for 1/4” tube 24” thermo coupler and 880 E pilot
Pieces per Pack 20 20
Semiautomatic Control For Water Heaters General Description
Semiautomatic thermostat designed to manually control turn on/off of main burner in storage-type water heaters.
General Specifications
Made of aluminum, allows to manually control turn on/off of main burner and shuts off gas if the pilot goes off. 1/2” HNPT gas inlet connection, 3/8” HNPT outlet connection.
R3 Code
Inlet
311908
1/2” HNPT
38
Outlet to burner 3/8” HNPT
Outlet to pilot 24” thermo coupler and 880 E pilot
Pieces per Pack 20
XVIII. TEMPERATURE CONTROLS (ACCESSORIES) Indicator Button General Description
Model U-40 indicator button for Iusatrol thermostat.
General Specifications
Indicator button made of fire-resistant plastic.
R3 Code
Model
Pieces per Pack
311943
U – 40
100
Gas Flow Handwheel General Description
Mod. U-6 gas flow handwheel for Iusatrol thermostat.
General Specifications
Gas flow handwheel made of flame-resistant plastic.
R3 Code
Model
Pieces per Pack
311941
U-6
100
Mod. 880E Pilot General Description Nail-type pilot.
General Specifications
A nail pilot is needed to start combustion in the burners of different devices.
R3 Code
Model
Pieces per Pack
311937
880 - E
100
Thermo Coupler General Description
The thermo coupler helps detect the presence or absence of flame in a pilot, it signals the thermostat to allow the burner to ignite or not.
General Specifications
The thermo coupler is a sensitive element vital to all water-heater thermostats. It features a safety device (magnet or power unit), it converts caloric energy into an electric current capable of energizing the magnet and thus operates the safety valve.
R3 Code
Model
311932
U - 57 - 24
Length
Pieces per Pack
24”
100
www.iusa.mx
39
IUSA | Natural Gas and LP
XIX. TORCHES FOR DISPOSABLE GAS CANISTERS European-Type Torch For Disposable Canisters General Description
European-type torch for disposable gas canisters, standard flame, for plumbing, handicrafts, refrigeration, bakery, etc.
General Specifications
Features a very resistant metal handle and a fine thread that allows a better gradation of flame measurement with its nozzle with a pre-adjusted air inlet that allows a better combustion and operation.
R3 Code 339294 339287
Model Model 901 Model 902
Pieces per Pack 10 10
CGA #600 Connection Torch General Description
Disposable-canister torch with CGA #600 connection, standard-measurement flame, recommended for plumbing, handicrafts, refrigeration, baking, etc.
General Specifications
Features a metal handle and a fine thread that allows a better control of the flame. It features a nozzle with a pre-adjusted air inlet that allows a better combustion and operation.
R3 Code 339291 339287
40
Model 901 902
Inlet CGA #600
Pieces per Pack 10 10
PASTEJÉ HEADQUARTERS Km 109, Carretera Panamericana México – Querétaro Jocotitlán, Edo. Méx. C.P. 50700, México For further information: EXPORTS Tel +52 5118 1400 ext. 2210
[email protected]