Cylinder Mounting Accessories HY08-SB1300-1/NA
Industrial Cylinders Cylinder Mounting Accessories
Catalog HY08-SB1300-1/NA
Schrader Bellows offers a complete selection of cylinder mounting accessories. Traditional Cylinder Attachments
Alignment Aids
Corrosion Resistant Attachments
In line with our policy of continuing product improvement, specifications and information contained in this catalog are subject to change. Copyright ©2011 by Parker Hannifin Corporation. All rights reserved. PRINTED IN THE U.S.A.
! WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from the Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having expertise. It is important that you analyze all aspects of your application, including consequences of any failure and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.
Offer of Sale The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by provisions stated on a separate page of the document entitled ‘Offer of Sale’.
2 www.schraderbellows.com
Schrader Bellows Des Plaines, Illinois USA
Industrial Cylinders Cylinder Mounting Accessories
Catalog HY08-SB1300-1/NA
Table of Contents / Features & Benefits Table of Contents Rod Clevis / Eye Bracket / Pivot Pin
2-3
Knuckle / Clevis Bracket / Pivot Pin
4-5
Dual Axis Knuckle
6
Linear Alignment Couplers
7
Spherical Bearing Mount Accessories
8
Split Couplers & Weld Plates
9
Metric Rod Clevis / Eye Bracket / Pivot Pin
10
Metric Plain Rod Eye / Clevis Bracket / Pivot Pin
11
Metric Spherical Rod Eye / Clevis Bracket / Pivot Pin
12
Stainless Steel Accessories
14-16
Manufacturing Locations
17
Safety Guide
18-19
Offer of Sale
20
New Cast Iron Clevis Brackets and Eye Brackets With Higher Load Ratings than Traditional Fabricated Steel Construction! Cast iron Eye Bracket and Clevis Bracket mounting accessories have load ratings that meet or exceed the maximum force generated by heavy duty industrial hydraulic cylinders. They are available to complement our traditional steel accessories for NFPA cylinders. Forged Steel or Cast Ductile Iron Clevis Bracket
Fabricated Steel Clevis Bracket
Consider the following when choosing between Forged Steel or Cast Ductile Iron and Fabricated Steel accessory brackets. Eye Bracket / Clevis Bracket Feature
Load Rating
Mounting Method Dual Axis Knuckle Compatibility Value Standardized Mounting
Material
Forged Steel or Cast Ductile Iron
Fabricated Steel Meets or exceeds maximum force Unchanged from previous catalogs. generated by heavy duty industrial Lower than cast iron in most sizes. hydraulic cylinders! See part number pages for details Attach with threaded fasteners Attach with threaded fasteners Forged Steel may be welded or weld to machine Recommended Not recommended Allows maximum swing arc Reduced swing arc Best economy with higher load ratings Good economy with and high volume production weld-in-place mounting ANSI/(NFPA) ANSI/(NFPA) T3.6.8 R3-2010 T3.6.8 R1-1984
1 www.schraderbellows.com
Schrader Bellows Des Plaines, Illinois USA
Rod Clevis / Eye Bracket / Pivot Pin
Industrial Cylinders Cylinder Mounting Accessories
Rod End Accessories
Accessory Load Capacity
Accessories offered for the rod end of the cylinder include: Rod Clevis, Eye Bracket, Knuckle, Clevis Bracket and Pivot Pin. To select the proper part number for any desired rod mounted accessory, refer to the table below and look opposite the thread size of the rod end as indicated in the first column. The Pivot Pins, Eye Brackets and Clevis Brackets are listed opposite the pin diameter that fits their mating Knuckles or Clevises.
The various accessories on this and the following pages have been load rated for your convenience. The load capacity, shown in the table below, is the recommended maximum load for that accessory based on a 4:1 design factor in tension. (Pivot Pin is rated in shear.) Before specifying, compare the actual load or the tension (pull) force at maximum operating pressure of the cylinder with the load capacity of the accessory you plan to use. If load or pull force of cylinder exceeds load capacity of accessory, consult factory.
Catalog HY08-SB1300-1/NA
Thread Size
Pin Ø
5/16-24 7/16-20 1/2-20 3/4-16 3/4-16 7/8-14 1-14 1-14 1 1/4-12 1 1/4-12 1 1/2-12 1 3/4-12 1 7/8-12 2 1/4-12 2 1/2-12 2 3/4-12 3 1/4-12 3 1/2-12 4-12
0.312 0.500 0.500 0.750 0.750 1.000 1.000 1.000 1.375 1.375 1.750 2.000 2.000 2.500 3.000 3.000 3.500 4.000 4.000
Rod Clevis Part Load Number Capacity (lb) 05122100001 0509400000 0509410000 0509420000 1332840000 0509430000 0509440000 1332850000 0509450000 1332860000 0509460000 0509470000 0509480000 0509490000 0509500000 0509510000 0509520000 0509530000 0509540000
Mounting Plate or Eye Bracket Forged Steel or Fabricated Steel Cast Ductile Iron Part Load Part Load Number Capacity (lb) Number Capacity (lb) 0959810031 1850 0740770000 1700 4620 0691950000 4100 09598100502 4620 0691950000 4100 09598100502 09598100752 12370 0691960000 10500 09598100752 12370 0691960000 10500 20450 08536100003 20400 09598101002 20450 08536100003 20400 09598101002 20450 08536100003 20400 09598101002 0959810138 33500 0691980000 21200 0959810138 33500 0691980000 21200 43300 0959810175 49480 08536200003 70100 08536300003 70000 09598102002 70100 08536300003 70000 09598102002 98200 08536400003 94200 09598102502 121940 08536500003 121900 09598103002 121940 08536500003 121900 09598103002 0959810350 187910 0735380000 57400 0959810400 268000 0735390000 75000 0959810400 268000 0735390000 75000
2600 4250 4900 11200 11200 18800 19500 19500 33500 33500 45600 65600 65600 98200 98200 98200 156700 193200 221200
Pivot Pin Part Shear Number Capacity (lb) – 0683680000 0683680000 0683690000 0683690000 0683700000 0683700000 0683700000 0683710000 0683710000 0683720000 0683730000 0683730000 0683740000 0683750000 0683750000 0735450000 0735470000 0735470000
– 8600 8600 19300 19300 34300 34300 34300 65000 65000 105200 137400 137400 214700 309200 309200 420900 565800 565800
Includes pivot pin. Cylinder accessory dimensions conform to ANSI/NFPA/T3.6.8 R3-2010. 3 Cylinder accessory dimensions conform to ANSI/NFPA/T3.6.8 R1-1984 1 2
Forged Steel or Cast Ductile Iron Mounting Plate or Eye Bracket Dimensions4 Approx. 20°
CB
M FL
ØCD ±.001
ØDD (4X)
LR
Note: Cast ductile iron eye brackets must not be welded in place.
F
R E
R E
Cast or Forged6 Part Number 0959810031 0959810050 0959810075 0959810100 0959810138 0959810175 0959810200 0959810250 0959810300 0959810350 0959810400
Pin Ø 0.312 0.500 0.750 1.000 1.375 1.750 2.000 2.500 3.000 3.500 4.000
CB 0.31 0.75 1.25 1.50 2.00 2.50 2.50 3.00 3.00 4.00 4.50
CD Ø 0.314 0.503 0.753 1.003 1.378 1.753 2.003 2.503 3.003 3.503 4.003
DD Ø 0.27 0.41 0.53 0.66 0.66 0.91 1.06 1.19 1.31 1.81 2.06
E (As Cast) 2.25 2.50 3.50 4.50 5.00 6.50 7.50 8.50 9.50 12.63 14.88
F
FL
LR
0.38 0.38 0.63 0.88 1.005 1.255 1.50 1.75 2.00 2.50 3.00
1.00 1.13 1.88 2.38 3.00 3.38 4.00 4.75 5.25 6.50 7.50
0.59 0.69 1.13 1.37 1.88 2.13 2.38 2.88 3.13 3.88 4.38
M (As Cast) 0.38 0.50 0.75 1.00 1.38 1.75 2.00 2.50 3.00 3.50 4.06
R 1.75 1.63 2.55 3.25 3.82 4.95 5.73 6.58 7.50 9.62 11.45
When used to mate with the Rod Clevis, select by pin diameter in the table above. These dimensions vary from NFPA standard. F is increased by .13. Sufficient LR clearance remains for full swing arc with Schrader Bellows cap clevis cylinders and rod clevises. 6 Eye Brackets with pin diameters .312 thru 1.000 are forged steel. Eye Brackets with 1.375 pin diameter and larger are cast ductile iron. 4 5
2 www.schraderbellows.com
Schrader Bellows Des Plaines, Illinois USA
Industrial Cylinders Cylinder Mounting Accessories
Catalog HY08-SB1300-1/NA
Rod Clevis / Eye Bracket / Pivot Pin Rod Clevis Dimensions ER
Pivot Pin Dimensions CW
CW
CB
ØCD ±.001
CL +.001 ØCD -.002
CE A KK Thread
Part Number1 05122100002 0509400000 0509410000 0509420000 1332840000 0509430000 0509440000 1332850000 0509450000 1332860000 0509460000 0509470000 0509480000 0509490000 0509500000 0509510000 0509520000 0509530000 0509540000
Pin Ø 0.310 0.500 0.500 0.750 0.750 1.000 1.000 1.000 1.375 1.375 1.750 2.000 2.000 2.500 3.000 3.000 3.500 4.000 4.000
A
CB
0.81 0.75 0.75 1.13 1.13 1.63 1.63 1.63 1.88 2.00 2.25 3.00 3.00 3.50 3.50 3.50 3.503 4.003 4.003
0.34 0.77 0.77 1.27 1.27 1.52 1.52 1.52 2.04 2.04 2.54 2.54 2.54 3.04 3.04 3.04 4.04 4.54 4.54
CD Ø 0.314 0.503 0.503 0.753 0.753 1.003 1.003 1.003 1.378 1.378 1.753 2.003 2.003 2.503 3.003 3.003 3.503 4.003 4.003
CE
CW
ER
2.25 1.50 1.50 2.13 2.38 2.94 2.94 3.13 3.75 4.13 4.50 5.50 5.50 6.50 6.75 6.75 7.75 8.81 8.81
0.20 0.49 0.49 0.62 0.62 0.74 0.74 0.74 0.99 0.99 1.24 1.24 1.24 1.49 1.49 1.49 1.98 2.23 2.23
0.30 0.50 0.50 0.75 0.75 1.00 1.00 1.00 1.38 1.38 1.75 2.00 2.00 2.50 2.75 2.75 3.50 4.00 4.00
KK Thread 5/16-24 7/16-20 1/2-20 3/4-16 3/4-16 7/8-14 1-14 1-14 1 1/4-12 1 1/4-12 1 1/2-12 1 3/4-12 1 7/8-12 2 1/4-12 2 1/2-12 2 3/4-12 3 1/4-12 3 1/2-12 4-12
Part Number 0683680000 0683690000 0683700000 0683710000 0683720000 0683730000 0683740000 0683750000 0735450000 07354700004 4
CD Ø 0.500 0.750 1.000 1.375 1.750 2.000 2.500 3.000 3.500 4.000
CL 1.88 2.63 3.13 4.19 5.19 5.19 6.19 6.25 8.25 9.00
This size supplied with cotter pins.
1. Pivot Pins are furnished with Clevis Mounted Cylinders as standard. 2. Pivot Pins are furnished with (2) Retainer Rings. 3. Pivot Pins must be ordered as a separate item if to be used with Knuckles, Rod Clevises, or Clevis Brackets.
Rod Clevis’ with pin diameters .312 thru 1.375 are forged steel. Rod Clevis’ with 1.750 pin diameter and larger are cast ductile iron. Includes Pivot Pin 3 Consult appropriate cylinder rod end dimensions for compatibility. 1
2
Fabricated Steel Mounting Plate or Eye Bracket Dimensions5 M
CB
MR
25°
ØCD ± .001
ØDD (X4)
LR FL F R E
Fabricated Steel Part Number 0740770000 0691950000 0691960000 0853610000 0691980000 0853620000 0853630000 0853640000 0853650000 0735380000 0735390000 5
Pin Ø 0.312 0.500 0.750 1.000 1.375 1.750 2.000 2.500 3.000 3.500 4.000
CB 0.31 0.75 1.25 1.50 2.00 2.50 2.50 3.00 3.00 4.00 4.50
CD Ø 0.314 0.503 0.753 1.003 1.378 1.753 2.003 2.503 3.003 3.503 4.003
DD Ø 0.27 0.41 0.53 0.66 0.66 0.91 1.06 1.19 1.31 1.81 2.06
R E
E
F
FL
LR
M
MR
R
2.25 2.50 3.50 4.50 5.00 6.50 7.50 8.50 9.50 12.63 14.88
0.38 0.38 0.63 0.88 0.88 1.13 1.50 1.75 2.00 1.69 1.94
1.00 1.13 1.88 2.38 3.00 3.38 4.00 4.75 5.25 5.69 6.44
0.63 0.75 1.25 1.50 2.13 2.25 2.50 3.00 3.25 4.00 4.50
0.38 0.50 0.75 1.00 1.38 1.75 2.00 2.50 2.75 3.50 4.00
0.50 0.56 0.88 1.25 1.63 2.13 2.44 3.00 3.25 4.13 5.25
1.75 1.63 2.55 3.25 3.82 4.95 5.73 6.58 7.50 9.62 11.45
When used to mate with the Rod Clevis, select by pin diameter in table on opposite page.
3 www.schraderbellows.com
Schrader Bellows Des Plaines, Illinois USA
Knuckle / Clevis Bracket / Pivot Pin
Industrial Cylinders Cylinder Mounting Accessories
Rod End Accessories
Accessory Load Capacity
Accessories offered for the rod end of the cylinder include Rod Clevis, Eye Bracket, Knuckle, Clevis Bracket, and Pivot Pin. To select the proper part number for any rod mounted accessory, refer to the table below and look in the row to the right of the rod thread in the first column. The Pivot Pins, Eye Brackets and Clevis Brackets are listed opposite the pin diameter that fits their mating Knuckles or Clevises.
The various accessories have been load rated for your convenience. The load capacity, shown in the table below, is the recommended maximum load for that accessory based on a 4:1 design factor in tension. (Pivot Pin is rated in shear.) Before specifying, compare the actual load or the tension (pull) force at the maximum operating pressure of the cylinder with the load capacity of the accessory you plan to use. If load or pull force of cylinder exceeds load capacity of accessory, consult factory.
Catalog HY08-SB1300-1/NA
1
Thread Size
Pin Ø
5/16-24 7/16-20 1/2-20 3/4-16 7/8-14 1-14 1 1/4-12 1 1/2-12 1 3/4-12 1 7/8-12 2 1/4-12 2 1/2-12 2 3/4-12 3 1/4-12 3 1/2-12 4-12 N/A
0.438 0.500 0.500 0.750 1.000 1.000 1.375 1.750 2.000 2.000 2.500 3.000 3.000 3.500 3.500 4.000 4.000
Knuckle Part Load Number Capacity (lb) 0740750000 0690890000 0690900000 0690910000 0690920000 0690930000 0690940000 0690950000 0690960000 0962160000 0962170000 0962180000 0962190000 0962200000 0962210000 0962220000 N/A
3300 5000 5700 12100 13000 21700 33500 45000 53500 75000 98700 110000 123300 161300 217300 273800 N/A
Clevis Bracket Forged Steel or Fabricated Steel Cast Ductile Iron Part Load Capacity Part Load Capacity Number (lb) Number (lb) 0960160044 2830 0740760000 3600 0960160050 7740 0692050000 7300 0960160050 7740 0692050000 7300 0960160075 13600 0692060000 10880 0960160100 23000 0692070000 15180 0960160100 23000 0692070000 15180 0960160138 39500 0692080000 23560 0960160175 49480 0692090000 21520 0960160200 72400 0692100000 26000 0960160200 72400 0692100000 26000 0960160250 98700 0692110000 28710 0960160300 123300 0692120000 28190 N/A N/A 0692130000 31390 0960160350 200400 0735420000 80250 0960160350 200400 0735420000 80250 0960160400 292100 0735430000 98420 N/A N/A N/A N/A
Pivot Pin Part Shear Number Capacity (lb) 0740780000 0683680000 0683680000 0683690000 0683700000 0683700000 0683710000 0683720000 0692150000 0692150000 0683740000 0683750000 0692160000 0735450000 0735450000 0821810000 07354700001
6600 8600 8600 19300 34300 34300 65000 105200 137400 137400 214700 309200 309200 420900 420900 565800 565800
This size supplied with cotter pins.
Forged Steel or Cast Ductile Iron Clevis Bracket Dimensions Approx. 20°
CW
CB
CW
M
FL
ØCD ±.001
ØDD (X4)
LR
Note: Cast ductile iron clevis brackets must not be welded in place.
F R E
R E
Cast or Forged2 Part Number 0960160044 0960160050 0960160075 0960160100 0960160138 0960160175 0960160200 0960160250 0960160300 0960160350 0960160400 2
Pin Ø 0.438 0.500 0.750 1.000 1.375 1.750 2.000 2.500 3.000 3.500 4.000
CB 0.46 0.78 1.28 1.53 2.03 2.53 2.53 3.03 3.03 4.03 4.53
CD Ø 0.440 0.503 0.753 1.003 1.378 1.753 2.003 2.503 3.003 3.503 4.003
CW 0.37 0.50 0.63 0.75 1.00 1.25 1.25 1.50 1.50 2.00 2.25
DD Ø 0.27 0.41 0.53 0.66 0.66 0.91 1.06 1.19 1.31 1.81 2.06
E (As Cast) 2.25 2.50 3.50 4.50 5.00 6.50 7.50 8.50 9.50 12.63 14.88
F
FL
LR
0.38 0.38 0.63 0.75 0.88 0.94 1.38 1.50 1.88 2.31 2.88
1.00 1.13 1.88 2.25 3.00 3.13 3.75 4.50 5.38 6.38 7.50
0.56 0.63 1.06 1.25 1.94 2.00 2.25 2.81 3.31 3.88 4.50
M (As Cast) 0.44 0.56 0.75 1.00 1.38 1.75 2.00 2.50 3.00 3.50 4.00
Clevis Brackets with pin diameters .438 thru 1.000 are forged steel. Clevis Brackets with 1.375 pin diameter and larger are cast ductile iron.
4 www.schraderbellows.com
Schrader Bellows Des Plaines, Illinois USA
R 1.75 1.63 2.56 3.25 3.81 4.94 5.75 6.59 7.50 9.62 11.50
Industrial Cylinders Cylinder Mounting Accessories
Catalog HY08-SB1300-1/NA
Knuckle / Clevis Bracket / Pivot Pin Knuckle Dimensions
Pivot Pin Dimensions
CB
ER Max.
ER Max.
CD ØCD ±.001 CA
0740750000 0690890000 0690900000 0690910000 0690920000 0690930000 0690940000 0690950000 0690960000 0962160000 0962170000 0962180000 0962190000 0962200000 0962210000 0962220000
Pin Ø 0.438 0.500 0.500 0.750 1.000 1.000 1.375 1.750 2.000 2.000 2.500 3.000 3.000 3.500 3.500 4.000
+.001 ØCD -.002 KK Thread
A
LR Min.
JL
Thread Size thru 1 3/4-12 Part Number
ØCD ±.001
CA
KK Thread
A
CB
CL
CD
Thread Size 1 7/8-12 & Larger
A
CA
CB
0.75 0.75 0.75 1.13 1.13 1.63 2.00 2.25 2.25 3.00 3.50 3.50 3.63 4.50 5.00 5.50
1.50 1.50 1.50 2.06 2.38 2.81 3.44 4.00 4.38 5.00 5.81 6.13 6.50 7.63 7.63 9.13
0.43 0.75 0.75 1.25 1.50 1.50 2.00 2.50 2.50 2.50 3.00 3.00 3.50 4.00 4.00 4.50
CD Ø 0.440 0.503 0.503 0.753 1.003 1.003 1.378 1.753 2.003 2.003 2.503 3.003 3.003 3.503 3.503 4.003
ER
JL
0.53 0.59 0.59 0.87 1.15 1.15 1.55 1.96 2.24 2.24 2.76 3.30 3.30 3.87 3.87 4.43
– – – – – – – – – 3.00 3.50 4.00 4.00 6.00 6.00 6.00
LR min – – – – – – – – – 2.77 3.09 3.58 3.58 4.18 4.18 4.80
Part Number
KK Thread 5/16-24 7/16-20 1/2-20 3/4-16 7/8-14 1-14 1 1/4-12 1 1/2-12 1 3/4-12 1 7/8-12 2 1/4-12 2 1/2-12 2 3/4-12 3 1/4-12 3 1/2-12 4-12
0740780000 0683680000 0683690000 0683700000 0683710000 0683720000 0692150000 0683740000 0683750000 0692160000 0735450000 0821810000 07354700001 1
CD Ø 0.438 0.500 0.750 1.000 1.375 1.750 2.000 2.500 3.000 3.000 3.500 4.000 4.000
CL 1.31 1.88 2.63 3.13 4.19 5.19 5.69 6.19 6.25 6.75 8.25 8.69 9.00
This size supplied with cotter pins.
1. Pivot Pins are furnished with Clevis Mounted Cylinders as standard. 2. Pivot Pins are furnished with (2) Retainer Rings. 3. Pivot Pins must be ordered as a separate item if to be used with Knuckles, Rod Clevises, or Clevis Brackets.
Fabricated Steel Clevis Bracket Dimensions CW M
25°
CW ØCD ±.001
ØDD (X4)
LR
FL
CB
MR
F R E
Fabricated Steel Part Number 0740760000 0692050000 0692060000 0692070000 0692080000 0692090000 0692100000 0692110000 0692120000 0692130000 0735420000 0735430000
Pin Ø 0.438 0.500 0.750 1.000 1.375 1.750 2.000 2.500 3.000 3.000 3.500 4.000
CB 0.46 0.80 1.30 1.59 2.09 2.59 2.59 3.09 3.09 3.59 4.09 4.59
CD Ø 0.440 0.503 0.753 1.003 1.378 1.753 2.003 2.503 3.003 3.003 3.503 4.003
CW 0.38 0.50 0.63 0.75 1.00 1.25 1.50 1.50 1.50 1.50 2.00 2.00
R E
DD Ø 0.27 0.41 0.53 0.66 0.66 0.91 1.06 1.19 1.31 1.31 1.81 2.06
E
F
FL
LR
M
MR
R
2.25 3.50 5.00 6.50 7.50 9.50 12.75 12.75 12.75 12.75 15.50 17.50
0.38 0.50 0.63 0.75 0.88 0.88 1.00 1.00 1.00 1.00 1.69 1.94
1.00 1.50 1.88 2.25 3.00 3.63 4.25 4.50 6.00 6.00 6.69 7.69
0.63 0.75 1.19 1.50 2.00 2.75 3.19 3.50 4.25 4.25 5.00 5.75
0.38 0.50 0.75 1.00 1.38 1.75 2.25 2.50 3.00 3.00 3.50 4.00
0.50 0.63 0.91 1.25 1.66 2.22 2.78 3.13 3.59 3.59 4.13 4.88
1.75 2.55 3.82 4.95 5.73 7.50 9.40 9.40 9.40 9.40 12.00 13.75
5 www.schraderbellows.com
Schrader Bellows Des Plaines, Illinois USA
Dual Axis Knuckle
Industrial Cylinders Cylinder Mounting Accessories
Dual Axis Knuckle
Dual Axis Knuckle Benefits
Catalog HY08-SB1300-1/NA
Increased angular movement range compared to spherical bearing mount. ■ Significantly higher dynamic load rating than spherical bearing mount. ■ Reduced bearing loads and wear that results from misalignment. ■ Allows faster assembly of pivoting cylinders to the machine.
Using a Dual Axis Knuckle permits increased angular movement from the cylinder center line. Clevis or Eye mounted cylinders often require movement beyond the plane that two pivot pins allow. Spherical bearing mounts permit angular movement up to 4.5° within the pivoting plane. A Dual Axis Knuckle, with two pin holes 90° apart, installed at the cap and rod end of a mounting style MP1 cylinder adds two pivot points, thereby providing up to 30° movement in another plane at each end.
■
Maximum Achievable Angular Movement from Cylinder Centerline* Inboard Pin 15° maximum movement for cylinder misalignment only.
15°
15°
Outboard Pin 30° maximum movement when applying force to a load moving in a curved plane.
30°
30° CX
CX
*Maximum movement is achieved with cast clevis brackets. Movement is reduced when using fabricated clevis brackets.
Dual Axis Knuckle Dimensions and Usage CX LE
MR
ØCD ±.001 MR
LR
CB
LR
LE
ØCD ±.001
Part Number
Pin Ø
Load Capacity (lb)
CB
CD Ø
CX
CB
LE
LR
MR
Mating Parts Clevis Bracket
0952670000 0.500
4380
0.75 0.503 0.88 0.54 0.63 0.50
0960160050
0952680000 0.750
12370
1.25 0.753 1.19 0.80 0.94 0.75
0960160075
0952690000 1.000
20500
1.50 1.003 1.69 1.05 1.22 1.00
0960160100
0952700000 1.375
30500
2.00 1.378 2.38 1.44 1.69 1.38
0960160138
0952710000 1.750
49500
2.50 1.753 3.06 1.81 2.19 1.75
0960160175
0952720000 2.000
68000
2.50 2.003 3.63 2.09 2.44 2.00
0960160200
6 www.schraderbellows.com
Rod Clevis 0509400000, 0509410000 0509420000, 1332840000 0509430000, 0509440000, 1332850000 0509450000, 1332860000 0509460000 0509470000, 0509480000
MP1 Mount Usage by Series & Bore PA-2 & PL-2 PH2 1.50, 2.00, 2.50
1.50
3.25, 4.00, 5.00 2.00, 2.50 6.00, 7.00, 8.00
3.25
10.00
4.00
12.00
5.00
14.00
6.00
Schrader Bellows Des Plaines, Illinois USA
Industrial Cylinders Cylinder Mounting Accessories
Catalog HY08-SB1300-1/NA
Linear Alignment Couplers
Linear Alignment Couplers are available in 19 standard thread sizes... Cost Saving Features and Benefits Include... Simplifying Cylinder installation and reducing assembly costs
Maximum reliability for trouble-free operation, long life and lower operating costs
■
■
Increased cylinder life by reducing wear on Piston and Rod bearings
Increase Rod Bearing and Rod Seal life for lower maintenance costs
■
■
Alignment Coupler ØB
K
A Thread E Deep
J
M ° Total Movement
A Thread
Centerline ØD
ØF 1/16 1/8 Total Movement
H Across Flats G Across Flats
C
E
Part Numbers and Dimensions Part No. 1347570031 1347570038 1347570044 1347570050 1347570063 1347570075 1347570088 1347570100 1347570125 1337390125 1337390150 1337390175 1337390188 1337390200 1337390225 1337390250 1337390275 1337390300 1337390325 1337390425 1
A1 Thread
B Ø
C
5/16-24 1.13 1.75 3/8-24 1.13 1.75 7/16-20 1.38 2.00 1/2-20 1.38 2.00 5/8-18 1.38 2.00 3/4-16 2.00 2.31 7/8-14 2.00 2.31 1-14 3.13 3.00 1 1/4-12 3.13 3.00 1 1/4-12 3.50 4.00 1 1/2-12 4.00 4.38 1 3/4-12 4.00 4.38 1 7/8-12 5.00 5.63 2-12 5.00 5.63 2 1/4-12 6.75 6.38 2 1/2-12 7.00 6.50 2 3/4-12 7.00 6.50 3-12 7.00 6.50 3 1/4-12 9.25 8.50 4 1/4-12 12.88 11.25
D Ø
E
F Ø
G
H
J
K
M
Max. Pull Load (lb)
Max. Approx. Weight (lb)
0.94 0.94 1.13 1.13 1.13 1.63 1.63 2.38 2.38 2.00 2.25 2.25 3.00 3.00 3.25 4.00 4.00 4.00 5.25 7.75
0.50 0.50 0.75 0.75 0.75 1.13 1.13 1.63 1.63 2.00 2.25 2.25 3.00 3.00 3.50 3.50 3.50 3.50 4.50 4.50
0.50 0.50 0.63 0.63 0.63 0.94 0.94 1.44 1.44 1.50 1.75 1.75 2.25 2.25 2.75 3.25 3.25 3.25 4.00 5.50
0.38 0.38 0.50 0.50 0.50 0.75 0.75 1.25 1.25 1.25 1.50 1.50 1.94 1.94 2.38 2.88 2.88 2.88 3.38 4.88
0.75 0.75 0.88 0.88 0.88 1.31 1.31 1.88 1.88 1.69 1.94 1.94 2.63 2.63 2.88 3.38 3.38 3.38 4.50 7.00
0.38 0.38 0.38 0.38 0.38 0.44 0.44 0.75 0.75 0.75 0.88 0.88 1.38 1.38 1.63 1.63 1.63 1.63 2.00 1.50
0.94 0.94 1.09 1.09 1.09 1.28 1.28 1.78 1.78 2.50 2.75 2.75 3.38 3.38 3.75 3.88 3.88 3.88 5.50 8.75
6° 6° 6° 6° 6° 6° 6° 6° 6° 10° 10° 10° 10° 10° 10° 10° 10° 10° 10° 10°
1200 2425 3250 4450 6800 9050 14450 19425 30500 30500 45750 58350 67550 77450 99250 123750 150950 180850 218450 370850
.35 .35 .55 .55 .55 1.4 1.4 4.8 4.8 6.9 9.8 9.8 19.8 19.8 35.3 45.3 45.3 45.3 – –
metric thread also available - Contact the factory.
How to Order Linear Alignment Couplers — When ordering a cylinder with a threaded male rod end, specify the coupler of equal thread size by part number as listed in Table 1, i.e.; Piston Rod “KK” or “CC” dimension is 3/4" - 16", specify coupler part number 1347570075.
7 www.schraderbellows.com
Schrader Bellows Des Plaines, Illinois USA
Industrial Cylinders Cylinder Mounting Accessories
Catalog HY08-SB1300-1/NA
Spherical Bearing Mount Accessories
Pivot Pin and Clevis Bracket. To select the proper part number for any desired accessory refer to the tables below.
Schrader Bellows offers a complete range of Cylinder Accessories to assure you of the greatest versatility in present or future cylinder applications. Accessories offered for spherical bearing mount cylinders include the Rod Eye,
Spherical Rod Eye Dimensions ØCD
Bore Ø
EX ER (Max)
1.50 2.00 & 2.50 3.25 4.00 5.00 6.00
Lube Fitting
LE
Part No.
CE
A
JK Thd
CD Ø
A
JK JL Load Thread Ø Capacity (lb) 0.72 0.86 0.44 0.80 0.78 7/16-20 0.88 2644
0961000050 .5000-0005
CE
EX
ER
LE
0961000075 .7500-0005 1.02 1.25 0.66 1.14 1.06 3/4-16 1.31 0961000100 0961000138 0961000175 0961000200
1.0000-0005 1.3750-0005 1.7500-0005 2.0000-0005
1.52 2.02 2.14 2.89
1.88 2.13 2.50 2.75
0.88 1.19 1.53 1.75
1.34 1.67 2.05 2.60
1.45 1-14 1.50 1.91 1 1/4-12 2.00 2.16 1 1/2-12 2.00 2.50 1 7/8-12 2.75
9441 16860 28562 43005 70193
ØJL
Order to fit Piston Rod Thread Size.
Pivot Pin Dimensions
Bore Ø 1.50 2.00 & 2.50 3.25 4.00 5.00 6.00
CL
ØCD
Part No.
CD Ø .4997-0004 .7497-0005 .9997-0005 1.3746-0006 1.7496-0006 1.9996-0007
0839620000 0839630000 0839640000 0839650000 0839660000 0839670000
CL
Shear Capacity (lb) 8600 19300 34300 65000 105200 137400
1.56 2.03 2.50 3.31 4.22 4.94
Pivot Pins are furnished with (2) Retainer Rings.
Clevis Bracket Dimensions CW M
CW
CW
CF
CW
M ØCD ±.001
ØCD ±.001
ØDD (X4)
LR
FL
CF
MR
ØDD (4X)
LR
FL F
F R E
R E
R E
R E
Fabricated Steel
Cast Ductile Iron
Order to fit Cylinder Cap or Rod Eye.
Bore Ø
Pin Ø
1.50 2.00 & 2.50 3.25 4.00 5.00
0.500 0.750 1.000 1.375 1.750
6.00
Cast Fabricated Steel Ductile Iron Part Number Part Number 0959450000 0839470000 0959300000 0839480000 0959310000 0839490000 0959320000 0839500000 0959330000 0839510000
2.000 0959340000
0839520000
CD Ø
CF
CW
DD Ø
E
F
FL
LR
M
MR
R
0.503 0.753 1.003 1.378 1.753
0.45 0.67 0.89 1.20 1.55
0.50 0.63 0.75 1 .00 1.25
0.41 0.53 0.53 0.66 0.91
3.00 3.75 5.50 6.50 8.50
0.50 0.63 0.75 0.88 1.25
1.50 2.00 2.50 3.50 4.50
0.94 1.38 1.69 2.44 2.88
0.50 0.88 1.00 1.38 1.75
0.63 1.00 1.19 1.63 2.06
2.05 2.76 4.10 4.95 6.58
2.003 1.77 1.50 0.91 10.63 1.50 5.00 3.00 2.00 2.38 7.92
8 www.schraderbellows.com
Schrader Bellows Des Plaines, Illinois USA
Load Capacity (lb) 5770 9450 14300 20322 37800 50375
Industrial Cylinders Cylinder Mounting Accessories
Catalog HY08-SB1300-1/NA
Split Couplers & Weld Plates Schrader Bellows “Style 6” Piston Rod End Split Couplers and Weld Plates
C
D F Bolts
Ø E ØA
ØB
Style 6 Rod End Split Coupler Weld Plate
WARNING: Piston rod separation from the machine member can result in severe personal injury or even death to nearby personnel. The cylinder user must make sure the weld holding the weld plate to the machine is of sufficient quality and size to hold the intended load. The cylinder user must also make sure the bolts holding split coupler to the weld plate are of sufficient strength to hold the intended load and installed in such a way that they will not become loose during the machine’s operation.
Part Numbers and Dimensions Rod Ø 0.625 1.000 1.375 1.750 2.000 2.500 3.000 3.500 4.000 4.500 5.000 5.500 7.000 8.000 8.500 9.000 10.000
A Ø 1.50 2.00 2.50 3.00 3.50 4.00 5.00 5.88 6.38 6.88 7.38 8.25 10.38 11.38 12.38 13.12 14.12
B Ø 2.00 2.50 3.00 4.00 4.00 4.50 5.50 7.00 7.00 8.00 8.00 9.00 11.00 12.00 13.00 14.00 15.00
C
D
.50 .50 .63 .63 .75 .75 1.00 1.00 1.00 1.00 1.00 1.25 1.75 2.00 2.00 2.25 2.50
.56 .88 1.00 1.25 1.63 1.88 2.38 2.63 2.63 3.13 3.13 3.88 4.00 4.00 4.00 4.00 4.47
E Ø .250 .250 .250 .250 .375 .375 .375 .375 .375 .375 .375 .375 .500 .500 .500 .500 .500
F
Bolt Size
4 6 6 8 12 12 12 12 12 12 12 12 12 16 16 12 16
#10-24 x .94 LG .250-20 x 1.25 LG .312-18 x 1.0” LG .312-18 x 1.75 LG .375-16 x 2.25 LG .375-16 x 2.50 LG .500-13 x 3.25 LG .625-11 x 3.50 LG .625-11 x 3.50 LG .625-11 x 4.00 LG .625-11 x 4.00 LG .750-10 x 5.00 LG 1.00-8 x 5.50 LG 1.00-8 x 5.50 LG 1.00-8 x 5.50 LG 1.25-7 x 6.00 LG 1.25-7 x 6.50 LG
Bolt Circle 1.125 1.500 2.000 2.375 2.687 3.187 4.000 4.687 5.187 5.687 6.187 6.875 8.750 9.750 10.750 11.125 12.125
Split Coupler Part No. 1472340062 1472340100 1472340138 1472340175 1472340200 1472340250 1472340300 1472340350 1472340400 1472340450 1472340500 1472340550 1472340700 1472340800 1472340850 1472340900 1472341000
Weld Plate Part No. 1481740062 1481740100 1481740138 1481740175 1481740200 1481740250 1481740300 1481740350 1481740400 1481740450 1481740500 1481740550 1481740700 1481740800 1481740850 1481740900 1481741000
Note: Bolts are not included with split coupler or weld plate.
9 www.schraderbellows.com
Schrader Bellows Des Plaines, Illinois USA
Industrial Cylinders Cylinder Mounting Accessories
Catalog HY08-SB1300-1/NA
Metric Accessories
Pivot Pin for Clevis Bracket and Plain Rod Eye – Dimensions
Accessory Selection Accessories for the rod end of a cylinder are selected by reference to the rod end thread, while the same accessories, when used at the cap end, are selected by cylinder bore size. See tables of part numbers below, and on the following pages.
EL
Rod and Cap End Accessories
ØEK
Accessories for the ISO 6020-2 cylinder include: Rod End – rod clevis, eye bracket and pivot pin – plain rod eye, clevis bracket and pivot pin – rod eye with spherical bearing Cap End – eye bracket for cap clevis mounting – clevis bracket for cap eye mounting – pivot pin for eye bracket and clevis bracket
Bore Ø 25 32 40 50 63 80 100 125 160 200
KK Rod Eye Pivot Nominal Weight Thread Clevis Bracket Pin Force kN kg M10x1.25 1434470000 1448080000 1434770000 8 0.3 M12x1.25 1434480000 1448090000 1434780000 12.5 0.6 M14x1.5 1434490000 1448100000 1434790000 20 0.8 M16x1.5 1434500000 1448110000 1434800000 32 2.2 M20x1.5 1434510000 1448120000 1434800000 50 2.7 M27x2 1434520000 1448130000 1434810000 80 5.9 M33x2 1434530000 1448140000 1434820000 125 9.4 M42x2 1434540000 1448150000 1434830000 200 17.8 M48x2 1434550000 1448160000 1434840000 320 26.8 M64x3 1434560000 1448170000 1434850000 500 39.0
1434470000 1434480000 1434490000 1434500000 1434510000 1434520000 1434530000 1434540000 1434550000 1434560000
KK Thread
H9
17 16 18 22 28 36 45 56 63 85
32 36 38 54 60 75 99 113 126 168
10 12 14 20 20 28 36 45 56 70
25 32 40 60 60 83 103 123 143 163
Rod Clevis
12 16 20 30 30 40 50 60 70 80
20 32 30 50 50 61 76 102 112 146
12 17 17 29 29 34 50 53 59 78
M10x1.25 M12x1.25 M14x1.5 M16x1.5 M20x1.5 M27x2 M33x2 M42x2 M48x2 M64x3
LE Weight kg 14 19 19 32 32 39 54 57 63 83
1434770000 1434780000 1434790000 1434800000 1434810000 1434820000 1434830000 1434840000 1434850000
10 12 14 20 28 36 45 56 70
29 37 45 66 87 107 129 149 169
Eye Bracket
f8
Nominal Force kN 8 12.5 20 32 50 80 125 200 320 500
1448080000 1448090000 1448100000 1448110000 1448120000 1448130000 1448140000 1448150000 1448160000 1448170000
0.08 0.25 0.32 1.0 1.1 2.3 2.6 5.5 7.6 13.0
Part No.
CK Ø
EM
FL
1448080000 1448090000 1448100000 1448110000 1448120000 1448130000 1448140000 1448150000 1448160000 1448170000
10 12 14 20 20 28 36 45 56
12 16 20 30 30 40 50 60 70
70
80
23 29 29 48 48 59 79 87 103 132
h13
H9
MR LE max min 12 17 17 29 29 34 50 53 59 78
Weight kg 0.2 0.3 0.4 1.0 1.4 3.2 5.6 10.5 15.0 20.0
13 19 19 32 32 39 54 57 63 82
AA Ø
HB Ø
TG
UD
40 47 59 74 91 117 137 178 219 269
5.5 6.6 9 13.5 13.5 17.5 17.5 26 30 33
28.3 33.2 41.7 52.3 64.3 82.7 96.9 125.9 154.9 190.2
40 45 65 75 90 115 130 165 205 240
FL LE
UD EM ØHB
CM
MR ØAA
TG
ØCK
UD
LE CE AV Min CR
0.02 0.05 0.08 0.2 0.4 1.0 1.8 4.2 6.0
Eye Bracket
CL ER max
EL Weight kg
Eye Bracket Dimensions
Rod Clevis Dimensions AV CE CK CL CM CR ER A16 Ø
EK Ø
Eye Bracket – for Cap Clevis Mount
Rod Clevis, Eye Bracket and Pivot Pin
Part No.
Part No.
TG
KK Thread
All dimensions are in millimeters unless otherwise stated.
10 www.schraderbellows.com
Schrader Bellows Des Plaines, Illinois USA
ØCK
Industrial Cylinders Cylinder Mounting Accessories
Catalog HY08-SB1300-1/NA
Metric Accessories Plain Rod Eye, Clevis Bracket and Pivot Pin KK Thread M10x1.25 M12x1.25 M14x1.5 M16x1.5 M20x1.5 M27x2 M33x2 M42x2 M48x2 M64x3
Plain Rod Eye 1434570000 1434580000 1434590000 1434600000 1434610000 1434620000 1434630000 1434640000 1434650000 1434660000
Clevis Bracket 1436460000 1436470000 1436480000 1436490000 1436490000 1436500000 1436510000 1436520000 1436530000 1436540000
Pivot Pin 1434770000 1434780000 1434790000 1434800000 1434800000 1434810000 1434820000 1434830000 1434840000 1434850000
Nominal Weight Force kN kg 8 0.5 12.5 1.0 20 1.3 32 3.2 50 3.8 80 6.9 125 12.5 200 26.0 320 47.0 500 64.0
Plain Rod Eye / Knuckle Dimensions Part No. 1434570000 1434580000 1434590000 1434600000 1434610000 1434620000 1434630000 1434640000 1434650000 1434660000
AW CA CB CD
Plain Rod Eye / Knuckle
CK EM ER KK LE Weight Ø h13 Thread kg
EM
ER max
H9
14 32 18 16 36 22 18 38 20 22 54 30 28 60 30 36 75 40 45 99 50 56 113 65 63 126 90 85 168 110
9 11 12.5 17.5 20 25 35 50 56 70
10 12 14 20 20 28 36 45 56 70
12 16 20 30 30 40 50 60 70
12 17 17 29 29 34 50 53 59 80 78
M10x1.25 M12x1.25 M14x1.5 M16x1.5 M20x1.5 M27x2 M33x2 M42x2 M48x2 M64x3
13 19 19 32 32 39 54 57 63 83
0.08 0.15 0.22 0.5 1.1 1.5 2.5 4.2 11.8 17.0
Clevis Bracket Dimensions CK Ø
CM CW FL MR HB LE RC TB UR UH A16 max min
1436460000 1436470000 1436480000 1436490000 1436500000 1436510000 1436520000 1436530000 1436540000
10 12 14 20 28 36 45 56
12 16 20 30 40 50 60 70
70
80
6 23 12 8 29 17 10 29 17 15 48 29 20 59 34 25 79 50 30 87 53 35 103 59 40 132 78
CA AW min
CD
Part No.
25 32 40 50 63 80 100 125 160 200
1436460000 1436470000 1436480000 1436490000 1436490000 1436500000 1436510000 1436520000 1436530000 1436540000
CB
CD
5.5 6.6 9 13.5 17.5 17.5 26 30 33
13 18 47 19 24 57 19 30 68 32 45 102 39 60 135 54 75 167 57 90 183 63 105 242 82 120 300
35 45 55 80 100 130 150 180 200
60 70 85 125 170 200 230 300 360
Nominal Force kN 8 12.5 20 32 50 80 125 200 320 500
Weight kg
FL
UR CW
CM
TB
ØHB
UH
ØCK
RC
Pivot Pin for Clevis Bracket and Plain Rod Eye – Dimensions
0.4 0.8 1.0 2.5 2.5 5.0 9.0 20.0 31.0 41.0
LE
CW
MR
Clevis Bracket – for Cap Eye Mount Bore Ø
LE
Clevis Bracket
Part No.
H9
KK Thread
ØCK
Part No.
1434770000 1434780000 1434790000 EL 1434800000 1434810000 ØEK 1434820000 1434830000 1434840000 All dimensions are in millimeters 1434850000 unless otherwise stated.
11 www.schraderbellows.com
EK Ø
EL Weight kg
10 12 14 20 28 36 45 56
29 37 45 66 87 107 129 149 169
f8
70
Schrader Bellows Des Plaines, Illinois USA
0.02 0.05 0.08 0.2 0.4 1.0 1.8 4.2 6.0
Industrial Cylinders Cylinder Mounting Accessories
Catalog HY08-SB1300-1/NA
Metric Accessories Rod Eye with Spherical Bearing, Mounting Bracket and Pivot Pin KK Thread M10x1.25 M12x1.25 M14x1.5 M16x1.5 M20x1.5 M27x2 M33x2 M42x2 M48x2 M64x3
Rod Eye with Spherical Bearing 1452540000 1452550000 1452560000 1452570000 1452580000 1452590000 1452600000 1452610000 1452620000 1452630000
EN EU
Mounting Bracket and Pivot Pin 1455300000 1455310000 1455320000 1455330000 1455340000 1455350000 1455360000 1455370000 1455380000 1455390000
Nominal Weight Force kg kN 8 0.2 12.5 0.3 20 0.4 32 0.7 50 1.3 80 2.3 125 4.4 200 8.4 320 15.6 500 28.0
EF 3° ØCN
A max 40 45 55 62 80 90 105 134 156 190
AX min 15 17 19 23 29 37 46 57 64 86
EF max 20 22.5 27.5 32.5 40 50 62.5 80 102.5 120
CH
CN Ø 12 -0.008 16 -0.008 20 -0.012 25 -0.012 30 -0.012 40 -0.012 50 -0.012 60 -0.015 80 -0.015 100 -0.020
42 48 58 68 85 105 130 150 185 240
FU
CH
Section A-A
AX KK
P MA Torque
A
N
Rod Eye with Spherical Bearing All spherical bearings should be re-packed with grease when servicing. In unusual or severe working conditions, consult the factory regarding the suitability of the bearing chosen.
Rod Eye with Spherical Bearing Dimensions Part No. 1452540000 1452550000 1452560000 1452570000 1452580000 1452590000 1452600000 1452610000 1452620000 1452630000
A
LF A
3°
EN
EU
FU
10 -.012 14 -.012 16 -.012 20 -.012 22 -.012 28 -.012 35 -.012 44 -.015 55 -.015 70 -.020
8 11 13 17 19 23 30 38 47 57
13 13 17 17 19 23 30 38 47 57
KC
LG
KK Thread M10x1.25 M12x1.25 M14x1.5 M16x1.5 M20x1.5 M27x2 M33x2 M42x2 M48x2 M64x3
LF min 16 20 25 30 35 45 58 68 92 116
LJ
RE
N max 17 21 25 30 36 45 55 68 90 110
MA max Nm 10 10 25 25 45 45 80 160 310 530
P M6 M6 M8 M8 M10 M10 M12 M16 M20 M24
Mounting Bracket and Pivot Pin Dimensions Part No.
CF Ø
CG
+0.1, +0.3
CO N9
CP
FM js11
FO js14
GL
js13
K7/h6
HB Ø
0, +0.30
LO
SR max
js13
TA
UJ
js13
UK
1455300000
12
10
10
30
40
16
46
9
3.3
28
29
56
55
12
40
75
60
1455310000 1455320000 1455330000 1455340000 1455350000 1455360000 1455370000 1455380000 1455390000
16 20 25 30 40 50 60 80 100
14 16 20 22 28 35 44 55 70
16 16 25 25 36 36 50 50 63
40 50 60 70 80 100 120 160 200
50 55 65 85 100 125 150 190 210
18 20 22 24 24 35 35 35 35
61 64 78 97 123 155 187 255 285
11 14 16 18 22 30 39 45 48
4.3 4.3 5.4 5.4 8.4 8.4 11.4 11.4 12.4
37 39 48 62 72 90 108 140 150
38 40 49 63 73 92 110 142 152
74 80 98 120 148 190 225 295 335
70 85 100 115 135 170 200 240 300
16 20 25 30 40 50 60 80 100
55 58 70 90 120 145 185 260 300
95 120 140 160 190 240 270 320 400
80 90 110 135 170 215 260 340 400
Cap Mounting Bracket and Pivot Pin Bore Ø 25 32 40 50 63 80 100 125 160 200
Mounting Bracket and Pivot Pin 1455300000 1455310000 1455320000 1455330000 1455340000 1455350000 1455360000 1455370000 1455380000 1455390000
Nominal Force kN 8 12.5 20 32 50 80 125 200 320 500
Mounting Bracket and Pivot Pin
Weight kg
CP CG
0.6 1.3 2.1 3.2 6.5 12.0 23.0 37.0 79.0 140.0
FO
LO GL
SR
ØCF LG LJ ØHB
RE UJ
FM
KC
CO TA UK
All dimensions are in millimeters unless otherwise stated.
12 www.schraderbellows.com
Schrader Bellows Des Plaines, Illinois USA
Industrial Cylinders Cylinder Mounting Accessories
Catalog HY08-SB1300-1/NA
Notes
Notes
13 www.schraderbellows.com
Schrader Bellows Des Plaines, Illinois USA
Stainless Steel Accessories
Industrial Cylinders Cylinder Mounting Accessories
Cylinder Accessories
Accessory Load Capacity
Type 316 Stainless Steel mounting accessories are offered to provide you a complete corrosion resistant cylinder mounting package. Accessories offered include Rod Clevis, Knuckle, Eye Bracket, Clevis Bracket and (17-4 SS) Pivot Pin. To select the proper part number for any desired accessory, refer to the table below and look in the row to the right of the rod thread in the first column. The Pivot Pins, Eye Brackets and Clevis Brackets are listed opposite the pin diameter that fits their mating Knuckles or Clevises.
The various accessories have been load rated for your convenience. The load capacity, shown in the tables below, is the recommended maximum load for that accessory based on a 4:1 design factor in tension. (Pivot pin is rated in shear). Before specifying, compare the actual load or the tension (pull) force at maximum operating pressure of the cylinder with the load capacity of the accessory you plan to use. If the load or pull force of the cylinder exceeds the accessory capacity, consult the factory. All Stainless Steel Accessories Include Electropolishing
Catalog HY08-SB1300-1/NA
Rod End Accessories Thread Size
Pin Ø
7/16-20 1/2-20 3/4-16 7/8-14 1-14 1 1/4-12 1 1/2-12 1 3/4-12 1 7/8-12 2 1/4-12
0.500 0.500 0.750 1.000 1.000 1.375 1.750 2.000 2.000 2.500
Rod Clevis Part Number Load Capacity (lb) 0938480000 2125 0938490000 2450 0938500000 5600 0938510000 9400 0938520000 9750 0938530000 22300 0938540000 30400 0938550000 43700 0938560000 43700 0938570000 65400
Eye Bracket Part Number Load Capacity (lb) 0938680000 2050 0938680000 2050 0938690000 5800 0938700000 12200 0938700000 12200 0938710000 12720 0938720000 32900 0938730000 46600 0938730000 46600 0938740000 62800
Pivot Pin Part Number Load Capacity (lb) 0938820000 8000 0938820000 8000 0938830000 17900 0938840000 31900 0938840000 31900 0938850000 60500 0938860000 98000 0938870000 127700 0938870000 127700 0938880000 199600
Clevis Bracket Part Number Load Capacity (lb) 0938750000 3650 0938750000 3650 0938760000 7000 0938770000 9600 0938770000 9600 0938780000 18850 0938790000 17100 0938800000 19700 0938800000 19700 0938810000 20900
Pivot Pin Part Number Load Capacity (lb) 0938820000 8000 0938820000 8000 0938830000 17900 0938840000 31900 0938840000 31900 0938850000 60500 0938860000 98000 0938870000 127700 0938870000 127700 0938880000 199600
Rod End Accessories Thread Size
Pin Ø
7/16-20 1/2-20 3/4-16 7/8-14 1-14 1 1/4-12 1 1/2-12 1 3/4-12 1 7/8-12 2 1/4-12
0.500 0.500 0.750 1.000 1.000 1.375 1.750 2.000 2.000 2.500
Knuckle Part Number Load Capacity (lb) 0938580000 2700 0938590000 3100 0938600000 7200 0938610000 7800 0938620000 13000 0938630000 20000 0938640000 30000 0938650000 35500 0938660000 50000 0938670000 65000
14 www.schraderbellows.com
Schrader Bellows Des Plaines, Illinois USA
Industrial Cylinders Cylinder Mounting Accessories
Catalog HY08-SB1300-1/NA
Stainless Steel Accessories Rod Clevis Dimensions
CW
ER
CB
CW
ØCD ±.001 CE A KK Thread
Part Number
Pin Ø 0.500 0.500 0.750 1.000 1.000 1.375 1.750 2.000 2.000 2.500
0938480000 0938490000 0938500000 0938510000 0938520000 0938530000 0938540000 0938550000 0938560000 0938570000
A
CB
0.75 0.75 1.13 1.63 1.63 2.00 2.25 3.00 3.00 3.50
0.77 0.77 1.27 1.52 1.52 2.04 2.54 2.54 2.54 3.04
CD Ø 0.503 0.503 0.753 1.003 1.003 1.378 1.753 2.003 2.003 2.503
Eye Bracket Dimensions
CE
CW
ER
1.50 1.50 2.38 3.13 3.13 4.13 4.50 5.50 5.50 6.50
0.49 0.49 0.62 0.74 0.74 0.99 1.24 1.24 1.24 1.49
0.50 0.50 0.75 1.00 1.00 1.38 1.75 2.00 2.00 2.50
KK Thread 7/16-20 1/2-20 3/4-16 7/8-14 1-14 1 1/4-12 1 1/2-12 1 3/4-12 1 7/8-12 2 1/4-12
CB M
MR 25°
ØDD 4 Holes
LR
FL
ØCD + .001
F R E
Part Number
Pin Ø
CB
R E
CD Ø
DD Ø
E
F
FL
LR
M
MR
R
0938680000
0.500
0.75
0.503
0.41
2.50
0.38
1.13
0.75
0.50
0.56
1.63
0938690000 0938700000 0938710000 0938720000 0938730000 0938740000
0.750 1.000 1.375 1.750 2.000 2.500
1.25 1.50 2.00 2.50 2.50 3.00
0.753 1.003 1.378 1.753 2.003 2.503
0.53 0.66 0.66 0.91 1.06 1.19
3.50 4.50 5.00 6.50 7.50 8.50
0.63 0.88 0.88 1.13 1.50 1.75
1.88 2.38 3.00 3.38 4.00 4.75
1.25 1.50 2.00 2.25 2.50 3.00
0.75 1.00 1.38 1.75 2.00 2.50
0.88 1.25 1.63 2.13 2.44 3.00
2.55 3.25 3.82 4.95 5.73 6.58
Pivot Pin Dimensions CL ØCD
Part Number 0938820000 0938830000 0938840000 0938850000 0938860000 0938870000 0938880000
CD Ø 0.500 0.750 1.000 1.375 1.750 2.000 2.500
+.001 -.002
CL 1.88 2.63 3.13 4.13 5.19 5.19 6.19
1. Pivot Pins are furnished with (2) retainer rings. 2. Pivot Pins must be ordered as a separate item if to be used with Rod Clevises or Clevis Brackets.
15 www.schraderbellows.com
Schrader Bellows Des Plaines, Illinois USA
Industrial Cylinders Cylinder Mounting Accessories
Catalog HY08-SB1300-1/NA
Stainless Steel Accessories Knuckle Dimensions
ER
ØCD
±.001
A Full Thread KK Thread
M
Part Number
Pin Ø 0.500 0.500 0.750 1.000 1.000 1.375 1.750 2.000 2.000 2.500
0938580000 0938590000 0938600000 0938610000 0938620000 0938630000 0938640000 0938650000 0938660000 0938670000
CA
CB
A
CA
CB
0.75 0.75 1.13 1.13 1.63 2.00 2.25 2.25 3.00 3.50
1.50 1.50 2.06 2.38 2.81 3.44 4.00 4.38 5.00 5.81
0.75 0.75 1.25 1.50 1.50 2.00 2.50 2.50 2.50 3.00
CD Ø 0.503 0.503 0.753 1.003 1.003 1.378 1.753 2.003 2.003 2.503
ER 0.71 0.71 1.06 1.41 1.41 1.94 2.47 2.83 2.83 3.54
KK Thread 7/16-20 1/2-20 3/4-16 7/8-14 1-14 1 1/4-12 1 1/2-12 1 3/4-12 1 7/8-12 2 1/4-12
M 0.50 0.50 0.75 1.00 1.00 1.38 1.75 2.00 2.00 2.50
Clevis Bracket Dimensions M
25°
ØDD 4 Holes
LR
FL
CW
CB
CW
MR
ØCD ± .001
F R E
Part Number 0938750000 0938760000 0938770000 0938780000 0938790000 0938800000 0938810000
Pin Ø 0.500 0.750 1.000 1.375 1.750 2.000 2.500
CB 0.78 1.30 1.59 2.09 2.56 2.56 3.06
CD Ø 0.503 0.753 1.003 1.378 1.753 2.003 2.503
CW 0.50 0.63 0.75 1.00 1.25 1.50 1.50
R E
DD Ø 0.41 0.53 0.66 0.66 0.91 1.06 1.19
E
F
FL
LR
M
MR
R
3.50 5.00 6.50 7.50 9.50 12.75 12.75
0.50 0.63 0.75 0.88 0.88 1.00 1.00
1.50 1.88 2.25 3.00 3.63 4.25 4.50
0.75 1.19 1.50 2.00 2.75 3.19 3.50
0.50 0.75 1.00 1.38 1.75 2.25 2.50
0.63 0.91 1.25 1.66 2.22 2.78 3.13
2.55 3.82 4.95 5.73 7.50 9.40 9.40
Pivot Pin Dimensions CL ØCD
Part Number 0938820000 0938830000 0938840000 0938850000 0938860000 0938870000 0938880000
CD Ø 0.500 0.750 1.000 1.375 1.750 2.000 2.500
+.001 -.002
CL 1.88 2.63 3.13 4.13 5.19 5.19 6.19
1. Pivot Pins are furnished with (2) retainer rings. 2. Pivot Pins must be ordered as a separate item if to be used with Rod Clevises or Clevis Brackets.
16 www.schraderbellows.com
Schrader Bellows Des Plaines, Illinois USA
Industrial Cylinders Cylinder Mounting Accessories
Catalog HY08-SB1300-1/NA
Offer of Sale
Offer of Sale
The items described in this document and other documents and descriptions provided by Parker Hannifin Corporation, Hydraulics Group, and its authorized distributors (“Seller”) are hereby offered for sale at prices to be established by Seller. This offer and its acceptance by any customer (“Buyer”) shall be governed by all of the following Terms and Conditions. Buyer’s order for any item described in its document, when communicated to Seller verbally, or in writing, shall constitute acceptance of this offer. All goods or work described will be referred to as “Products”. 11. Buyer’s Obligation; Rights of Seller. To secure payment of all sums due or other wise, Seller shall retain a security interest in the goods delivered and this agreement shall be deemed a Security Agreement under the Uniform Commercial Code. Buyer authorizes Seller as its attorney to execute and file on Buyer’s behalf all documents Seller deems necessary to perfect its security interest. Seller shall have a security interest in, and lien upon, any property of Buyer in Seller’s possession as security for the payment of any amounts owed to Seller by Buyer. 12. Improper Use and Indemnity. Buyer shall indemnify, defend, and hold Seller harmless from any claim, liability, damages, lawsuits, and costs (including attorney fees), whether for personal injury, property damage, patent, trademark or copyright infringement or any other claim, brought by or incurred by Buyer, Buyer’s employees, or any other person, arising out of: (a) improper selection, improper application or other misuse of Products purchased by Buyer from Seller; (b) any act or omission, negligent or otherwise, of Buyer; (c) Seller’s use of patterns, plans, drawings, or specifications furnished by Buyer to manufacture Product; or (d) Buyer’s failure to comply with these terms and conditions. Seller shall not indemnify Buyer under any circumstance except as otherwise provided. 13. Cancellations and Changes. Orders shall not be subject to cancellation or change by Buyer for any reason, except with Seller’s written consent and upon terms that will indemnify, defend and hold Seller harmless against all direct, incidental and consequential loss or damage. Seller may change product features, specifications, designs and availability with notice to Buyer. 14. Limitation on Assignment. Buyer may not assign its rights or obligations under this agreement without the prior written consent of Seller. 15. Entire Agreement. This agreement contains the entire agreement between the Buyer and Seller and constitutes the final, complete and exclusive expression of the terms of the agreement. All prior or contemporaneous written or oral agreements or negotiations with respect to the subject matter are herein merged. 16. Waiver and Severability. Failure to enforce any provision of this agreement will not waive that provision nor will any such failure prejudice Seller’s right to enforce that provision in the future. Invalidation of any provision of this agreement by legislation or other rule of law shall not invalidate any other provision herein. The remaining provisions of this agreement will remain in full force and effect. 17. Termination. This agreement may be terminated by Seller for any reason and at any time by giving Buyer thirty (30) days written notice of termination. In addition, Seller may by written notice immediately terminate this agreement for the following: (a) Buyer commits a breach of any provision of this agreement (b) the appointment of a trustee, receiver or custodian for all or any part of Buyer’s property (c) the filing of a petition for relief in bankruptcy of the other Party on its own behalf, or by a third party (d) an assignment for the benefit of creditors, or (e) the dissolution or liquidation of the Buyer. 18. Governing Law. This agreement and the sale and delivery of all Products hereunder shall be deemed to have taken place in and shall be governed and construed in accordance with the laws of the State of Ohio, as applicable to contracts executed and wholly performed therein and without regard to conflicts of laws principles. Buyer irrevocably agrees and consents to the exclusive jurisdiction and venue of the courts of Cuyahoga County, Ohio with respect to any dispute, controversy or claim arising out of or relating to this agreement. Disputes between the parties shall not be settled by arbitration unless, after a dispute has arisen, both parties expressly agree in writing to arbitrate the dispute. 19. Indemnity for Infringement of Intellectual Property Rights. Seller shall have no liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided in this Section. Seller will defend and indemnify Buyer against allegations of infringement of U.S. patents, U.S. trademarks, copyrights, trade dress and trade secrets (“Intellectual Property Rights”). Seller will defend at its expense and will pay the cost of any settlement or damages awarded in an action brought against Buyer based on an allegation that a Product sold pursuant to this Agreement infringes the Intellectual Property Rights of a third party. Seller’s obligation to defend and indemnify Buyer is contingent on Buyer notifying Seller within ten (10) days after Buyer becomes aware of such allegations of infringement, and Seller having sole control over the defense of any allegations or actions including all negotiations for settlement or compromise. If a Product is subject to a claim that it infringes the Intellectual Property Rights of a third party, Seller may, at its sole expense and option, procure for Buyer the right to continue using the Product, replace or modify the Product so as to make it noninfringing, or offer to accept return of the Product and return the purchase price less a reasonable allowance for depreciation. Notwithstanding the foregoing, Seller shall have no liability for claims of infringement based on information provided by Buyer, or directed to Products delivered hereunder for which the designs are specified in whole or part by Buyer, or infringements resulting from the modification, combination or use in a system of any Product sold hereunder. The foregoing provisions of this Section shallconstituteSeller’ssoleandexclusiveliabilityandBuyer’ssoleandexclusiveremedy for infringement of Intellectual Property Rights. 20. Taxes. Unless otherwise indicated, all prices and charges are exclusive of excise, sales, use, property, occupational or like taxes which may be imposed by any taxing authority upon the manufacture, sale or delivery of Products. 21. Equal Opportunity Clause. For the performance of government contracts and where dollar value of the Products exceed $10,000, the equal employment opportunity clauses in Executive Order 11246, VEVRAA, and 41 C.F.R. §§ 601.4(a), 60-741.5(a), and 60-250.4, are hereby incorporated.
1. Terms and Conditions. Seller’s willingness to offer Products, or accept an order for Products, to or from Buyer is expressly conditioned on Buyer’s assent to these Terms and Conditions and to the terms and conditions ound on-line at www.parker.com/saleterms/. Seller objects to any contrary or additional term or condition of Buyer’s order or any other document issued by Buyer. 2. Price Adjustments; Payments. Prices stated on the reverse side or preceding pages of this document are valid for 30 days. After 30 days, Seller may change prices to reflect any increase in its costs resulting from state, federal or local legislation, price increases from its suppliers, or any change in the rate, charge, or classification of any carrier. The prices stated on the reverse or preceding pages of this document do not include any sales, use, or other taxes unless so stated specifically. Unless otherwise specified by Seller, all prices are F.O.B. Seller’s facility, and payment is due 30 days from the date of invoice. After 30 days, Buyer shall pay interest on any unpaid invoices at the rate of 1.5% per month or the maximum allowable rate under applicable law. 3. Delivery Dates; Title and Risk; Shipment. All delivery dates are approximate and Seller shall not be responsible for any damages resulting from any delay. Regardless of the manner of shipment, title to any products and risk of loss or damage shall pass to Buyer upon tender to the carrier at Seller’s facility (i.e., when it’s on the truck, it’s yours). Unless otherwise stated, Seller may exercise its judgment in choosing the carrier and means of delivery. No deferment of shipment at Buyers’ request beyond the respective dates indicated will be made except on terms that will indemnify, defend and hold Seller harmless against all loss and additional expense. Buyer shall be responsible for any additional shipping charges incurred by Seller due to Buyer’s changes in shipping, product specifications or in accordance with Section 13, herein. 4. Warranty. Seller warrants that the Products sold hereunder shall be free from defects in material or workmanship for a period of eighteen months from the date of delivery to Buyer. The prices charged for Seller’s products are based upon the exclusive limited warranty stated above, and upon the following disclaimer: DISCLAIMER OF WARRANTY: THIS WARRANTY COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO PRODUCTS PROVIDED HEREUNDER. SELLER DISCLAIMS ALL OTHER WARRANTIES, EXPRESS AND IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 5. Claims; Commencement of Actions. Buyer shall promptly inspect all Products upon delivery. No claims for shortages will be allowed unless reported to the Seller within 10 days of delivery. No other claims against Seller will be allowed unless asserted in writing within 60 days after delivery or, in the case of an alleged breach of warranty, within 30 days after the date within the warranty period on which the defect is or should have been discovered by Buyer. Any action based upon breach of this agreement or upon any other claim arising out of this sale (other than an action by Seller for any amount due to Seller from Buyer) must be commenced within thirteen months from the date of tender of delivery by Seller or, for a cause of action based upon an alleged breach of warranty, within thirteen months from the date within the warranty period on which the defect is or should have been discovered by Buyer. 6. LIMITATION OF LIABILITY. UPON NOTIFICATION, SELLER WILL, AT ITS OPTION, REPAIR OR REPLACE A DEFECTIVE PRODUCT, OR REFUND THE PURCHASE PRICE. IN NO EVENT SHALL SELLER BE LIABLE TO BUYER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF, OR AS THE RESULT OF, THE SALE, DELIVERY, NON-DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS OR ANY PART THEREOF, OR FOR ANY CHARGES OR EXPENSES OF ANY NATURE INCURRED WITHOUT SELLER’S WRITTEN CONSENT, EVEN IF SELLER HAS BEEN NEGLIGENT, WHETHER IN CONTRACT, TORT OR OTHER LEGAL THEORY. IN NO EVENT SHALL SELLER’S LIABILITY UNDER ANY CLAIM MADE BY BUYER EXCEED THE PURCHASE PRICE OF THE PRODUCTS. 7. Contingencies. Seller shall not be liable for any default or delay in performance if caused by circumstances beyond the reasonable control of Seller. 8. User Responsibility. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and Product and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application and follow applicable industry standards and Product information. If Seller provides Product or system options, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the Products or systems. 9. Loss to Buyer’s Property. Any designs, tools, patterns, materials, drawings, confidential information or equipment furnished by Buyer or any other items which become Buyer’s property, may be considered obsolete and may be destroyed by Seller after two consecutive years have elapsed without Buyer placing an order for the items which are manufactured using such property. Seller shall not be responsible for any loss or damage to such property while it is in Seller’s possession or control. 10. Special Tooling. A tooling charge may be imposed for any special tooling, including without limitation, dies, fixtures, molds and patterns, acquired to manufacture Products. Such special tooling shall be and remain Seller’s property notwithstanding payment of any charges by Buyer. In no event will Buyer acquire any interest in apparatus belonging to Seller which is utilized in the manufacture of the Products, even if such apparatus has been specially converted or adapted for such manufacture and notwithstanding any charges paid by Buyer. Unless otherwise agreed, Seller shall have the right to alter, discard or otherwise dispose of any special tooling or other property in its sole discretion at any time.
17 www.schraderbellows.com
Schrader Bellows Des Plaines, Illinois USA
Parker Hannifin Corporation Schrader Bellows Industrial Cylinder Division 500 South Wolf Road Des Plaines, IL 60016 USA phone (847) 298-2400 fax (800) 892-1008 www.schraderbellows.com
11/11 / HY08-SB1300-1/NA