North American

Gla ss Bl oc k D e si gn Guide

More Patterns. More Colors. More Shapes & Sizes. More Choice.

Create More.

Seves Glass Block unites the world’s leading manufacturers together under one umbrella.

Seves Glass Block is the world’s leading manufacturer of glass blocks for architectural and interior design applications. Seves Glass Block owns 36% of the world’s glass block production and distribution market. With nine different colors, a neutral line, and 200 different glass designs, Seves Glass Block has a 40% share (in terms of value) of the world glass block market. The collective traditions and in-depth expertise of the most prestigious brands in international glass block design and production have been united together under Seves Glass Block: Vetroarredo, Vitrablok, Solaris and Weck Glass Block are all featured in the Seves Glass Block product line. Today, Seves Glass Block provides high-quality products, with superior technological contents and strict structural standards, while respecting both the environment and consumer. Seves Glass Block’s success is defined by one clear objective: to maximize the potential of glass block by transforming it from a traditional construction element into an artistic expression of light and space. Thanks to the use of select raw materials, cuttingedge machinery, techniques of coloring, and the strict monitoring of systematic controls, Seves Glass Block has transformed the “old” glass block into a modern block of glass. This has given birth to a new and refined architectural furnishing element for interior and exterior applications in residential or commercial design, which can also be customized by request according to any project. Seves Glass Block is capable of unique forms and aesthetic realizations that will inspire creativity in architects, interior designers and consumers alike.

www.sevesglassblock.com

Contents

6

Architectural Line

14

Basic Line

16

Solids

22

Tailor Made

24

Technology

25

Energy Saving

29

North American Glass Block design guide

Welcome

Design Line

— 3

Advantages

Glass Block Advantages Graffiti And Vandal Resistant

The surface of glass block is resilient to abuse from paints, markers and stickers with an easier to clean quality making it the intelligent choice for public structures.

Transmission Of Light Brilliance and Adaptability

Extremely versatile, glass block gives designers, architects and consumers the ability to transform ordinary spaces into places of light, color, texture and shape. The combinations of Seves styles, sizes and hues provide unlimited design possibilities while providing the structural strength and light transmission glass block has always set the standard for. With this huge array of options glass block is also now adaptable to most any project.

Glass block resists most scratching, clouding and weathering while providing exceptional visibility that is in compliance with ADA guidelines for enclosed areas. Changes in levels of both artificial and natural light compliment the appearance of glass block surfaces, shapes and colors thereby enhancing both interior and exterior environments.

Resistance To Impact

The all-around thickness of the glass block surfaces combined with the strength of the mortar joints surrounding them give glass block a definitive advantage over traditional glass windows. These advantages also make glass block the choice building material for transmitting light while adding extra protection from projectile strikes and accidental impacts. The Seves Technology line also features bullet-resistant options and more.

www.sevesglassblock.com

Energy Conservation

The thermal resistance difference between glass block and single glaze plate glass at 1/8 inch thickness is more than two to one. Glass block provides over double the R-Value of standard plate glass while also taking into consideration the cooling effect that the shading horizontal mortar joints provides over large surface areas.

Noise And Sound Resistant

Features such as mass and internal air space guarantee that Seves glass blocks offer a high level of sound insulation value with a minimum of 40dB. The Technology line features products with sound insulation capacities that are not only superior to the recommended ranges for ambient sound but even better than brick walls of identical thickness. These blocks can reach a 49dB level of sound barrier and make Seves glass block a preferred material in very noisy environments (discos, manufacturing facilities, etc.)

Glass block has always been valued for its virtues of strength and light transmission. Adding to these benefits are textures and patterns that can obscure interiors from exterior visibility. Seves now features an array of sizes and thicknesses in the Technology line that elevate security factors to maximum levels. These thicker and solid blocks offer multitudes of choices when security, visibility and sound transmission are factors. Many blocks also offer increased protection from fire, weather and ballistic damage.

Fire Resistant

All Seves glass block lines feature inherent fire-resistant composition. The Seves Technology line includes a specific range of glass blocks that are suitable for vertical applications requiring high classes of fire protection and are certified according to principal regulations. Seves Glass Block submits “fire resistant” glass blocks to strict quality controls which raise their mean resistance and enable the stability of the panel and its heat insulation quality to be verified over time.

North American Glass Block design guide

Sustainability

Seves Glass Block is a supporter of LEED building certification and is equally proud of the environmental benefits glass block provides. Composed primarily of the abundant raw materials of sand and limestone, glass block also has low production waste and is completely recyclable. Its long lasting durability has been tested through the ages and its energy efficiency is at the pinnacle of the glass building product world.

Advantages

Security

— 5

Design Line The Design line was developed with the contributions and experience of leading figures in contemporary architecture and design who shared our desire to create a new concept of glass block inspired by the principles of creativity, style, functionality and innovation. These innovative technologies, when applied to the manufacturing of the standard module, led to the creation of the “winged” Pegasus glass block. The mold-breaking Pegasus has done away with joints and has freed walls from any interruption in the continuity of glass.

Pegasus Q19 Colors

7.5” x 7.5” x 3”

Pegasus is a new generation of glass block that features a “Pegasus” winged block design technology allowing for uninterrupted glass surfaces without highly visible joints. Pegasus Pastel Colors present a full assortment of attractive hues for any design Interior or Exterior application. WAVE = O

Acquamarina T

Acquamarina O

Blu T

Blu O

Giallo T

Giallo O

Lilla T

Lilla O

TRANSPARENT = T

Turchese T

Turchese O

Neutro T

Neutro O

Nordica T

Nordica O

Verde T

Verde O

Rosa T

Rosa O

Siena T

Siena O

Terminal Lineare T

Terminal Curvo T

7.5” x 3.5” x 3” T

Angular Corner T

Terminal Lineare O

Terminal Curvo O

7.5” x 3.5” x 3” O

Angular Corner O

Available with Satin Finish 1 or 2 sides

Special Pieces ALL COLORS ABOVE ARE AVAILABLE IN SHAPES EXCEPT GIALLO & LILA. ALL COLORS ARE AVAILABLE IN WAVE = O TRANSPARENT = T & SATIN FINISH ON 1 OR 2 SIDES

www.sevesglassblock.com

Other Design Line products include the Mendini Collection, a range of brightly colored blocks, whose tones draw inspiration from the colors of nature and precious stones. Also included in this collection is the Metalized option, which is a highly reflective. The mirror effect on the external edges creates an elegant reflective silver effect and further reduces the perception of joints combining beauty and functionality and making the surfaces brighter and more elegant. Ideal forstriking interiors and exteriors, the metalized range is available in smooth and wavy glass designs and in a rich variety of colors that, thanks to metallisation, acquire special brightness and luminosity.

Lilla O MET

Giallo O MET

Neutro O MET

Design line

Turchese O MET

Product

More BRILLIANCE & TEXTURE.

—

Pegasus Metalized

7.5” x 7.5” x 3”

7 Acquamarina O MET

Rosa O MET

Nordica O MET

Siena O MET

Blu O MET

Verde O MET

Ideal for striking interiors and exteriors, Metalized is available in smooth and wavy designs with a rich variety of colors. The combination of two exclusive Seves technologies, including actual metallization, give Pegasus Metalized Block its special brightness, lightness and luminosity. Special shapes are also available.

Onda esterna Pattern Outside 1 Face

Pegasus 3D 7.5” x 7.5” x 3” The newest addition to the Design Line features two new glass blocks, each with a distinct glass design engraved onto the external surface. Now it’s possible to explore the dimensions of your creativity through space, style and light with the unique and tactile texture of glass blocks.

Clear

Blue

Nordica

Sienna

mosaico Pattern Outside 2 Faces

Clear

Blue

Available with Satin Finish 1 or 2 sides

North American Glass Block design guide

Nordica

Sienna

The Mendini Collection 7.5” x 7.5” x 3”

Agata

Ambra

Ametista

Berillo

Citrino

Corallo

Giada

Malachite

Tormalina

White 30%

White 100%

Zaffiro

Black 30%

Black 100%

Rubino

Topazio

There are 16 colors in this range, from the boldest and sharpest ones to a striking black or white. These vibrant colors, manufactured with “Pegasus” winged glass block technology, present a new exciting design element for interiors. Recommended for interior use only.

www.sevesglassblock.com

TYPICAL DETAIL INFORMATION AND CODE LIMITATIONS SEVES Pegasus Glass Block Products A. Hollow glass blocks - Thinline Series –80mm thickness and special shapes. All blocks are designed for a modular face dimension in metric sizes with 2mm visible joint thickness. B. Mortar shall conform to ASTM C270 Type ‘S’ for maximum bond strength.

D. Panel anchors to be 13/4” x 24” x 20 gauge steel with elongated perforations and hot dipped zinc coating. Locate panel anchors in same joint as horizontal reinforcing. Panel anchor to be installed in horizontal joint of masonry wall if possible and embedded 12”. For alternate connection, return panel anchor up face of jamb and add two ¼” anchors with washers just above bend of anchor. Anchors to be in horizontal alignment. E. Aluminum channels with panel anchors are an acceptable alternate. F. Head and jamb channel to be 1½” x 3¾” x 14 gauge for Thinline Series. Channels used for exterior installations should have hot dipped zinc coating. G. All glass block panels to be nonload bearing and isolated from surrounding structures/walls with 3/8” thick glass fiber or white polyethylene foam expansion strips at jambs and head. Sill to be coated with asphalt emulsion to serve as a bond breaker. H. Structural members around glass block panels shall be limited to a deflection of L/600. I. Provide for vertical expansion joints where straight walls and curved walls (radius larger than 24”) intersect or at a reversal of the curved wall. J. Expansion material at jambs may be omitted for panels with areas of 25 sq. ft. or less. Expansion joint at head must be maintained. K. All steel on the outside, within the wall system and adjacent to wall on inside, should be hot dipped galvanized or stainless steel to minimize rust staining.

M. Limitation of panel sizes: 1. Exterior or interior wall panels using Thinline Series (80mm thick) block, exposed to 20 lbs./square foot wind load or less to be limited to 85 square feet when supported on all four sides. Area may be increased to 150 square feet when an intermediate stiffener is incorporated as an additional supporting member near the middle of the panel. Maximum height is limited to 10 feet for exterior and 20 feet for interior installations. Maximum width is limited to 25 feet for exterior and interior. 2. Check governing building code for additional details. 3. Contact SEVES (1-855-823-4411) for design of glass block panels subjected to a wind load greater than 20 lbs./sq. ft. for design of free standing exterior panels. STANDARD SPECIFICATIONS DIVISION 4 SECTION 04270 GLASS UNIT MASONRY PART 1 GENERAL 1.01 SUMMARY SEVES has prepared this specification by using generally accepted and appropriate technical information. The information contained herein should not be solely relied upon but used as a guide for the design and specification of the intended application by the design professional with the appropriate disciplines. SEVES has no control over the elements of design, installation and workmanship and therefore disclaims all liability arising from the use or misuse of this specification 1.02 WORK INCLUDED A. SEVES Pegasus Hollow Glass Blocks Units B. Integral joint reinforcing. C. Mortar 1.03 RELATED WORK A. Steel Channels B. Sills, Lintels and Jamb Conditions C. Sealant D. Expansion and Packing Materials 1.04 REFERENCES A. ASTM C153, Hot Dipped Zinc Coating. B. ASTM C144, Aggregate for Masonry. C. ASTM C150, Portland Cement. D. ASTM C207, Hydrated Lime for

North American Glass Block design guide

Masonry. E. ASTM C207, Mortar for Unit Masonry. F. ASTM A82, Cold Drawn Steel Wire G. ASTM A580, Stainless Steel Wire H. ASTM A167 Stainless Steel Perforated Panel Anchors I. A STM D1187, Type II Asphalt Emulsion for Metal Surfaces J. ASTM D1227, Type III Asphalt Emulsion for Porous Surfaces 1.05 SUBMITTALS A. Product Data 1. Submit two (2) Copies of SEVES Pegasus Glass Blocks Catalog. B. Samples 1. Submit two (2) Pegasus glass blocks of each type showing size and pattern for approval 1.06 ENVIRONMENTAL REQUIREMENTS A. Maintain materials and ambient air temperatures to a minimum of 40° F prior to, during and 48 hours after completion of work. B. Protect Seves Pegasus glass blocks from moisture prior to construction. 1.07 WARRANTY A. SEVES offers a limited 5 year warranty on all glass block. PART 2 PRODUCTS 20.1 ACCEPTABLE MANUFACTURERS A. SEVES Glass Block ( 1-855-8234411) 2.02 GLASS UNITS A. Glass Block units ______ X ______ X ______ mm thick shall be partially evacuated hollow units made of clear or colored glass. B. Color (Clear or Colors) ________________ D. Pattern ________________________ E. Edge Coating - - White latex based or Metalized edge coating 2.03 ACCESSORIES A. Joint Reinforcing: Ladder type, hot dipped galvanized or stainless steel 2-9 gauge parallel longitudinal wire at 1-5/8” apart and cross rods welded every 8” o.c. B. Panel Anchors: 20 gauge X 1-3/4” X 24” hot dipped galvanized or stainless steel with staggered perforations. C. Perimeter Chase: Masonry recess, aluminum channel or steel channel. D. Asphalt Emulsion: Karnac 100 or approved equal. E. Expansion Strips: 3/8” X 3-1/2” polyethylene foam or glass fiber. F. Sealant: Sealant Type and Color _________ G. Backer Rod: As recommended by sealant supplier 2.04 MORTAR MATERIALS A. Shall be prepared according to ASTM C270 for Type S Mortar. Mortar to

have 1 part Portland Cement (Type 1), 1 part Type S Lime and 2-1/2 to 3 parts of fine sand passing No. 20 sieve and free of iron compounds to avoid stains. Use white Portland Cement and silica sand for white joints. Mix mortar drier than normal and only an amount that will be used in ½ to 1 hour. Glass block will not absorb water the same as brick. Do not use retempered mortar. Do not use antifreeze compounds or accelerators. B. Add ________ mortar color per manufacturer’s instructions. C. Add Latricrete 8510 or approved equal to increase waterproofing qualities of mortar. PART 3 EXECUTION 3.01 PREPARATION A. Verify that pocket recesses or chases provided under another section are accurately located and sized. B. Establish and protect lines, levels and coursing. 3.02 INSTALLATION A. Arrange coursing pattern to provide consistent joint work throughout. B. Locate and secure perimeter metal chase. C. Coat sill under units with asphalt emulsion as a bond breaker. D. Mortar joints must be solid. Furrowing not permitted. Neatly tool surface to a concave joint. E. Place panel reinforcing in horizontal joint above first course of block and not more than 18” c.c. for Standard Series, every other course for Thinline Series and every course for Fire Stop Series. Panel anchors if used shall be installed in the same joints as reinforcing. F. Isolate panel from adjacent construction on sides and top with expansion strips. Keep expansion joint voids clear of mortar. G. Maintain uniform joint width of 1/4” ± 1/8”. H. Maximum variation from plane of unit to next unit - 1/32”. I. M  aximum variation of panel from plane - 1/16”. J. Do not use retempered mortar. K. Do not tap glass block with steel tools. L. When mortar has set, pack backer rod in jamb and head channels. Recess to allow for sealant. M. Apply sealant. 3.03 CLEANING A. Remove excess mortar from glass surfaces with a damp cloth before set occurs. B. Strike and tool the joints as required for proper sealing. C. Number 4 (0000) steel wool can be used to remove remaining mortar and dried film.

Design line

C. Horizontal reinforcing for Thinline Series to 1 5/8” wide. All reinforcing to be hot dipped zinc coated or stainless steel. Horizontal reinforcing to have a maximum spacing of every third joint for 145mm block, every other joint at 190mm block and every joint at 300mm block.

L. S tructural silicone sealant may be used in lieu of mortar in which the exposed joints are approximately 1/8” thick and panels are limited to 25 square feet on exterior and 85 square feet on interior installations.

Product / specifications

Pegasus Specifications

— 9

Technical Drawings / Installation Steel Brace

suspende ceiling system Deflection space

Pegasus Glass Blocks

sealant Backer Rod

Mortar

Expansion strip

Horizontal reinforcing

Panel Anchor Pegasus Glass Block

Horizontal panel reinforcing Mortar

Mortar

asphalt emulsion

Panel Anchor

Floor finishing Concrete slab

GLASS BLOCK ANCHORING AT SUSPENDED CEILING

SILL - CONCRETE FLOOR

Mortar Horizontal reinforcing

Mortar

Sealant Horizontal reinforcing

Backer Rod Metal "T" frame max. deflection: L/600

Mortar

Pegasus Glass Block

Horizontal reinforcing

Pegasus Glass Block

Deflection space Panel anchoring Expansion strip

Mortar

Mortar Asphalt emulsion Backer Rod Sealant

Mortar

Mortar Horizontal reinforcing

Asphalt emulsion

Asphalt emulsion

Concrete curb

Concrete slab/wall finishing

WINDOW (CONRETE INTERIOR WALL/FLOOR)

HORIZONTAL SHELF SUPPORT

SILL - CURB

www.sevesglassblock.com

U frame

Concrete slab Deflection space

Deflection space

Sealant Packing

Details

gypsum board Solid blocking

Panel Anchoring

sealant Backer Rod Panel Anchoring

Expansion strip Pegasus Glass Blocks

Expansion strip Pegasus Glass Block

Mortar

Mortar

Design line

Horizontal reinforcing Horizontal reinforcing

— 11

HEAD - INTERIOR PARTITION WALL

HEAD - CONCRETE SLAB

Insulation wood or gypsum board metal frame

metal frame solid blocking Deflection space

Deflection space

Sealant Packing

wood or gypsum board sealant Backer Rod anchoring

Panel Anchoring Expansion strip Pegasus Glass Blocks

Expansion strip Pegasus Glass Blocks

Horizontal reinforcing Horizontal reinforcing Mortar Mortar

HEAD PARTITION - SUSPENDED CEILING

North American Glass Block design guide

HEAD - INSULATED WALL

Technical Drawings / Installation Steel frame Backer Rod Sealant Expansion strip

Backer Rod Sealant Horizontal reinforcing Expansion strip 1/16" distance between metal frame and steel plate

Horizontal reinforcing

steel plate floor

Crossbar welded to top of steel plate & head

1/16" clearance all around steel plate

steel plate

Mortar

Pegasus Glass Block

Pegasus Glass Block

Mortar

INTERMEDIATE VERTICAL SUPPORT IN MULTIPLE HORIZONTAL PANEL STEEL PLATE CEILING ANCHORING DETAIL

STEEL PLATE FLOOR ANCHORING DETAIL Sealant Backer Rod Steel plate Panel anchoring

Horizontal reinforcing

Horizontal reinforcing

Gypsum or wood board Heat isolation Metal Frame Pegasus Glass Block Mortar Pegasus Glass block

Expansion strip Backer Rod Sealant

Horizontal reinforcing

Mortar Pegasus Glass block

HIDDEN PLATE STIFFENER - INTERMEDIATE Pegasus linear or curved end block horizontal reinforcing Mortar Pencil rod for free standing panels

Mortar

ISOLATED WALL PARTITION

concrete or brick wall Sealant Backer Rod Panel Anchoring Expansion Strip

LINEAR & CURVED END BLOCKS

Gypsum Board Metal Stud Solid Blocking

Expansion strip Panel anchoring Backer Rod Sealant

Panel Anchoring Expansion Strip Pegasus Glass Blocks

Mortar

Mortar Horizontal panel Anchoring

Pegasus Glass Block

JAMB - CONCRETE WALL

Backer Rod Sealant

Horizontal reinforcing

Mortar Pegasus Glass Block

WALL PARTITION

Horizontal reinforcing

Steel frame Backer Rod Sealant Expansion strip

Panel anchoring Backer Rod Sealant

VERTICAL "T" STIFFENER - INTERMEDIATE

Gypsum board Finishing Metal stud Sealant Backer Rod

Pegasus Glass Block Mortar

Horizontal reinforcing

Mortar Pegasus Glass Block

Expansion strip Panel anchoring Solid blocking Backer Rod Sealant

Horizontal reinforcing

PERPENDICULAR TO PARTITION WALL

www.sevesglassblock.com

VetroQUICK

Details

Pegasus Installation System VetroQUICK is a dry installation system for creating glass block walls simply, quickly, safely and simplifies installation with the use of a few accessories: a profile and a cross. Accessories:

Design line — 13

Installation process IMPORTANT: before starting the installation process: Mark with a pencil the dimensions of the glass block wall on the floor and wall, making sure that these lines are square and level. If the wall is created with a wooden profile or another type of material, make sure the profile is securely fastened to the floor and wall.

Installation process Prepare the cross as “L” shape (for the starting angle) or “T” shape (for the first row of blocks) If creating cantilever walls (or using the end of a wall). Cut the profile in correspondence of the score line that marks the end block of the wall or rectangular block.

Use the cross depending on the glass block chosen (Pegasus or Basic) Prepare the cross as “L” shape and, use the profiles to insert it into the appropriate slot until a right angle is formed. Draw the necessary points on the floor and wall next to the holes present on the profile. Drill the holes. Place the wedges and screw the structure to the square created beforehand with VetroQUICK. Prepare the cross as “T” shape and join it to the profiles. Continue to add profiles and crosses, repeating the drawing, drilling and screwing operations until reaching the desired width of the wall. Once all the horizontal profiles have been positioned, start inserting the vertical profiles by inserting them into the slits.

North American Glass Block design guide

Place the glass blocks in between the vertical profiles until the row is completed Insert a “T” shape cross into the top block leaning against the wall (laterally) in order to continue the installation process with VetroQUICK Add more rows of VetroQUICK accessories and glass block rows until the whole wall is completed.

Finishing process Finish off the joins with quick-setting mortar. Mix the special mortar (cement-based filler) with the suitable mixing spade on the driller, with adjustable speed, Apply it with the suitable spatula or gummy plastering trowels.

• Fill the joints with the special mortar of the desired color. • Sponge the joint area after it has hardened. Clean with a wet cloth the surface of the glass when the mortar is dry but still not hardened, and refine your work with the suitable products. VetroQUICK is conceived and developed for indoor use. However it can be used in settings subject to high humidity or exposure to water (e.g. shower stalls) if totally impermeable finishing for joints is used, and if the finishing is done in a workman-like manner.

Architectural Line

In partnership with Weck Glass Block, Seves presents the Architectural Line. This collection features a complete range of familiar styles that are made with the impeccable craftsmanship standards only the team of Seves and Weck can achieve.

Nubio/Wave Intersecting random wave pattern, provides an attractive appearance and excellent privacy. Smooth exterior surface for easy cleaning. Matching designers shapes provide beauty and flexibility to create angles, curves or finished jambs and/or heads. 60 minute fire ratings is available in Nubio patterns.

Clarity This see-through block provides a dramatic grid effect, undistorted vision and maximum light transmission.

Cross Ribbed Vertical ribs on one face and horizontal on the other for excellent privacy.

Light Diffusing Grid pattern offers privacy, reduces glare.

Nubio Allbend Turns in 22 1/2° increments, ideal for curves, corners, or columns.

Nubio Corner Completes a smooth 90° turn.

Arctic Frosted glass appearance yields excellent privacy without pattern. Texture is on inside faces of glass for easy cleaning. Rain will not change the translucent effect.

Regent Multifaceted diamond pattern for strong sundappled shadows and a sparkling effect in bright sunlight.

Cortina Random texture built over the Nubio pattern. More privacy but without a fixed geometric design. Cortina (Curtain in Italian) reminds one of a rippled winter scene.

Nubio Endblock Finishing block, ideal for open jamb and top conditions.

Nubio Double-End Finished top and side for step down designs.

Top Finishing block for open top conditions.

www.sevesglassblock.com

Product / Specifications Architectural — 15

Size Chart (US Standard sizes in inches) U/R Values

Light Transmission Percent

Shading Coefficient Percent

Sound Loss Decibels

Weight per Block

Installed Wt. (lbs.) (per sq. ft.)

Installed Block Type/Dimensions

Design/Color

Fire Rating/ Minutes

8x8x4

Nubio, Clarity, Cross Ribbed, Arctic, Regent, Cortina

45

.48/2.08

73

0.65

41

6.4

19.5

8x8x4

Light diffusing

45

.48/2.08

51

0.41

42

6.4

19.5

8x8x4 60 minute

Nubio-60

60

.48/2.22

57

0.55

42

7.7

22.7

6x8x4

Nubio

45

.48/2.08

75

0.65

41

4.9

20.1

6x6x4

Nubio

45

.48/2.08

73

0.65

41

3.5

20.8

4x8x4

Nubio

45

.48/2.08

73

0.65

41

3.5

20.8

12x12x4

Nubio, Clarity, Cross Large

73

0.63

42

15.3

18.7

4x8x4 Corner

Nubio

50

0.30

39

4.1

18.1

8x8x4 End Block

Nubio

70

6.2

19.1

8x8x4 DoublEnd

Nubio

4x8x4 AllBend

Nubio

8x8x4 Nublo 45 4x8x4 Top

42

6.2

19.1

70

70 0.65

41

3.6

23.8

Nubio

50

0.30

39

4.1

18.1

Nubio

75

41

3.6

21.4

4x8x4 WeckEnd

Nubio

75

41

3.6

21.4

4x8x4 DoublEnd

Nubio

75

41

3.6

21.4

.50/2.00

On Special Request

NOTES: 1  . Face dimensions of blocks are nominal. Actual dimensions are 1/4” smaller than stated. 2. Thickness indicated is nominal. 3” thick is 3-1/8” and 4” thick is 3-7/8”. 3. Dimensions shown for Corner Blocks and AllBends are height and thickness only.

North American Glass Block design guide

Basic Line

Basic is traditional glass block reinterpreted according to Seves quality standards. The prevalent style for the Basic line glass blocks is a clear monochrome, ideal for use in interiors and for exteriors, and able to combine the structural aspect with the functional one: the passage of light.

Clear Glass

Arctic

Clearview Sahara 1s

Clearview Sahara 2s

Clearview

The Clear Glass Collection is ideal for applications where blocks are chosen mainly for their prime characteristic function – the passage of light. Available in a large variety of glass design faces and finishes, Seves Clear Glass Blocks are traditional yet distinctive and set the standard in the industry.

Cross large

Cross Small

Cuneis

Digona

Inca

Lozenge

Marina

Midarc

Optical

Paralline

Pyramid

Samba

Savona

Sponge

Stella

Wave Sahara 2s

Clearview

Wave Sahara 1s

Wave Sahara 2s

7.5” x 7.5” x 3”

7.5” x 3.5” x 3”

Wave

Wave

More Patterns. www.sevesglassblock.com

Colored Blocks Soft Shades

Azur

Azur Sahara 2s

Blue

Blue Sahara 2s

Brown

Brown Sahara 2s

Green wave

Green Sahara 2s

Product

More colors.

7.5” x 7.5” x 3”

Basic Line

Available in a range of 7 colors of glass selected by Seves to meet designer needs. All colors (azur, pink, green, grey, blue, brown & turquoise) are available in both clear and satin finishes allowing for mixing or matching applications and functions. Wave pattern is standard. Clear pattern is optional.

— Grey

Grey Sahara 2s

Colored Blocks Strong Shades

7.5” x 7.5” x 3”

Available in a range of 9 colors selected by Seves to meet designer needs. All colors (orange, blue, bronze, yellow, red, turquoise, ruby, violet & emerald) are emboldened with bright color obtained by applying special production techniques which enable the color to be put inside the block in the second phase of preparation. Recommended for interior use only. Wave pattern is standard. Clear pattern is optional.

Pink

Pink Sahara 2s

Turquoise

Blue

Bronze

Emerald

Orange

Ruby

Turquoise

Violet

Yellow

Turquoise Sahara 2s

Red

Special Pieces Seves Glass Block features special pieces that complete your application needs. Special pieces are available in complimenting patterns and finishes that are identical to standard size blocks.

Square Corner 90°

Double End

Linear End

Select blocks available by pre-order only. Please contact Seves North American Sales at 1.855.823.4411 or 330.752.2772

North American Glass Block design guide

17

Typical Detail Information and Code Limitations

Allbend 22 1/2”

Typical dimensions for curved wall

Typical dimensions for 22 1/2º, 46º, 67 1/2º and 90º corners

Radius Options Blocks 1 piece 4” x 8” per

AllBend 4

Outside Radius inches 14.5

1 piece 4” x 8” per

2

16.7

1 piece 8” x 8” per

4

17.5

1 piece 4” x 8” per

1

21.6

1 piece 8” x 8” per

2

21.7

1 piece 8” x 8” per 2 pieces 4” x 8” per

1 1

31.9 32.5

WECK and SEVES Glass Block Products A. Hollow glass blocks, Standard Series – 3 7/8 thick, Thinline Series – 3 1/8 thick and special shapes. All blocks are designed for a modular face dimension of 4”, 6”, 8” and 12” using ¼ thick mortar joints. B. Mortar shall conform to ASTM C270 Type ‘S’ for maximum bond strength. C. Horizontal reinforcing for Standard Series to be 2” wide of two 9 gauge parallel wires with cross ties at 8” on center. Reinforcing for Thinline Series to be 1 5/8” wide. All reinforcing to be hot dipped zinc coated or stainless steel. Horizontal reinforcing to have a maximum spacing of 18” on center, i.e. every third joint for 6”block, every other joint at 8” block and every joint at 12” block. D. Panel anchors to be 1 3/4” x 24” x 20 gauge hot dipped galvanized or stainless steel with elongated perforations. Locate panel anchors in same joint as horizontal reinforcing. Panel anchor to be installed in horizontal joint of masonry wall if possible and embedded 12”. For alternate connection, return panel anchor up face of jamb and add two ¼” anchors with washers just above bend of anchor. Anchors to be in horizontal alignment. E. Aluminum channels in lieu of panel anchors are an acceptable alternate. F. Head and jamb channel to be 1½” x 4½” x 14

gauge for Standard Series and 1½” x 3¾” x 14 gauge for Thinline Series. Channels used for exterior installations should have hot dipped zinc coating, or be non-ferrous metal. G. All glass block panels to be non-load bearing and isolated from surrounding structures/walls with 3/8” thick glass fiber or white polyethylene foam expansion strips at jambs and head. Sill to be coated with asphalt emulsion to serve as a bond breaker. H. Structural members around glass block panels shall be limited to a deflection of L/600. I. P  rovide for vertical expansion joints where straight walls and curved walls (radius larger than 24”) intersect or at a reversal of the curved wall. J. E xpansion material at jambs may be omitted for panels with areas of 25 sq. ft. or less. Expansion joint at head must be maintained. K. All steel on the outside, within the wall system and adjacent to wall on inside, should have a coating of hot dipped zinc or be stainless steel to minimize rust staining. L. S ilicone sealant may be used in lieu of mortar in which the exposed joints are approximately 1/8” thick and panels are limited to 25 square feet on exterior and 85 square feet on interior installations. M. Limitation of panel sizes: 1. Exterior wall panels using Standard Series (3 7/8” thick) block exposed to 20 lbs./square foot wind load

to be limited to 144 square feet when supported on all four sides. Area may be increased to 250 square feet when an intermediate stiffener is incorporated as an additional supporting member near the middle of the panel and span is not longer than 10 feet. Maximum height to be 20 feet and maximum width to be 25 feet except where the Uniform Building Code limits height and width to 15 feet. 2. Interior wall panels using Standard Series (3 7/8” thick) block to be limited to 250 square feet. Max. height to be 25 feet and max. width to be 25 feet except where the Uniform Building Code limits height and width to 15 feet. 3. Exterior or interior wall panels using Thinline Series (3 7/8” thick) block, exposed to 20 lbs./square foot wind load or less to be limited to 85 square feet when supported on all four sides. Area may be increased to 150 square feet when an intermediate stiffener is incorporated as an additional supporting member near the middle of the panel. Maximum height is limited to 10 feet for exterior and 20 feet for interior installations. Maximum width is limited to 25 feet for exterior and interior. 4. C  heck governing building code for additional details. 5. Contact SEVES ( 1-855-823-4411) for design of glass block panels subjected to a wind load greater than 20 lbs./sq. ft. for design of free standing exterior panels.

www.sevesglassblock.com

Fire Ratings - Gypsum Board Construction Details

jamb/head at interior

head

Basic Profile —

jamb

19 Elevation Gypsum Board Construction FIRE RATING1

sill

1

panel anchor detail GLASS BLOCK IN NON-MASONRY WALLS WITH PANEL ANCHOR CONSTRUCTION Rating: 45 or 60 minutes 1. Steel studs below sill to be 3-5/8” x 20 gauge 8” on center (Max. length of 36”) with a 3-5/8” x 20 gauge runner channel to create base for glass block. 2. Each jamb to be 3-5/8” x 20 gauge steel stud and runner channel. Gypsum board to be installed between stud and runner channel. 3. Head to be (2) 3-5/8” x 20 gauge studs with (2) runner channels. 4. Panel anchors to be 1-3/4” x 20 gauge x 24” long galvanized or stainless steel. They should be located above first course and in every other joint above. Secure panel anchor with (2) self drilling, self topping screw fasteners. Fasteners to be located at the top of slots and immediately above bend of the panel anchor. Install panel anchors at head in every other vertical mortar joint. 5. Horizontal mortar joints with panel anchors to be reinforced with 9 x 14 AWG galvanized or stainless steel wire. Overlap panel anchor a minimum of 6”. Use Type S Mortar. 6. Fill space between glass block and channel with glass fiber, mineral wool or polyethylene and seal with appropriate silicone sealant. 7. Various available spacers may be used to install WECK/ SEVES Brand Glass Blocks

North American Glass Block design guide

2

BLOCK THICKNESS2

ANCHORAGE CONSTRUCTION

MAX. DIMENSION

MAX. SQ. F.T.

45

3”

CHANNEL

10’-9”

94

45

4”

CHANNEL

10’-9”

94

60

4”

CHANNEL

10’-9”

94

45

3”

PANEL ANCHOR

10’-9”

94

45

4”

PANEL ANCHOR

10’-9”

94

60

4”

PANEL ANCHOR

10’-9”

94

Corner Blocks, End Blocks and 12 x 12 sizes are not fire rated. See Table 1 for applicable block designs and sizes.

GLASS BLOCK IN NON-MASONRY WALLS WITH CHANNEL CONSTRUCTION Rating: 45 or 60 minutes 1. Steel studs below sill to be 3-5/8” x 20 gauge 8” on center (Max. length of 36”)with a 3-5/8” x 20 gauge runner channel to create base for glass block. 2. Each jamb to be 3-5/8” x 20 gauge steel stud and runner channel with 14 gauge channel secured 16” on center. 3. H  ead conditions similar to jamb for interior installations. Channel at sill is optional. 4. Horizontal reinforcing for Standard Series block (3-7/8” thick) to be 2” wide consisting of two 9 gauge parallel wires with cross ties 8” on center. Reinforcing for Thinline Series block to be 1-5/8” wide. All reinforcing to be hot dipped zinc coated or stainless steel. Horizontal reinforcing to have a minimum spacing of 18” on center, i.e. every third joint for 6” block and every other joint for 8” block. 5. Glass block to be placed 1” deep into recess. Recess to be formed of 1-3/4” deep steel channel. Steel channel to be 14 gauge hollow metal. Do not use channel at sill for exterior installations. 6. Fill space between glass block and channel with glass fiber, mineral wool or polyethylene and seal with silicone caulk. 7. Various available spacers may be used to install WECK / SEVES Brand Glass Blocks

Fire Ratings - Masonry Construction

head jamb

jamb jamb/head

sill Masonry Construction FIRE RATING1

BLOCK THICKNESS2

ANCHORAGE CONSTRUCTION

MAX. DIMENSION

MAX. SQ. F.T.

45

3” or 4”

CHANNEL

12’-0”

120

60

4”

CHANNEL

10’-0”

100

90

4”

CHANNEL

10’-0”

100

45

3” or 4”

PANEL ANCHOR

10’-9”

94

60

4”

PANEL ANCHOR

10’-9”

94

Elevation

Corner Blocks, End Blocks and 12 x 12 sizes are not fire rated. 2 See Table 1 for applicable block designs and sizes. 1

GLASS BLOCK IN MASONRY WALLS WITH PANEL ANCHOR CONSTRUCTION Rating: 45 or 60 minutes. 1. Panel Anchors to be 1-3/4” x 20 gauge x 24” long galvanized or stainless steel. Locate above first course and in every other joint above. Secure panel anchor with (2) self drilling, self tapping screw fasteners. Fasteners to be located at top of slots and immediately above the bend of the panel anchor. Install panel anchors at head in every other vertical mortar joint. 2. Horizontal mortar joints with panel anchors to be reinforced with 9 x 14 AWG galvanized or stainless steel wire except below first course or above top course. Overlap panel anchor a minimum of 6”. Use type S mortar. 3. Sill to be coated with asphalt emulsion to serve as bond breaker. 4. Fill space between glass block and channel with glass fiber, mineral wool or polyethylene and seal with silicone caulk. 5. Various available spacers may be used to install WECK/ SEVES Brand Glass Blocks.

GLASS BLOCK IN MASONRY WALLS WITH CHANNEL CONSTRUCTION Rating: 45, 60 or 90 minutes 1. Horizontal reinforcing for Standard Series block (3-7/8” thick) to be 2” wide consisting of two 9 gauge parallel wires with cross ties 8” on center. Reinforcing for Thinline Series block to be 1-5/8” wide. All reinforcing to be hot dipped zinc coated or stainless steel. Horizontal reinforcing to have a maximum spacing of 18” on center, i.e. every third joint for 6” block and every other joint for 8” block. All mortar shall be Type S. 2. Glass block at head and jambs to be placed 1” into 1-1/2” deep recess. Recess to be formed of masonry or 1-3/4” deep steel channel. Steel channel to be 14 gauge hollow metal for 45 or 60 minute openings and steel channel (C5 x 6.7) for 90 minute openings. Do not use channel at sill for exterior installations. Sill to be coated with asphalt emulsion to serve as bond breaker.

www.sevesglassblock.com

Typical Wall Details Details

head

interior partition support

head

Basic Profile

head

— 21

spandrel

jamb

sill

vertical Mullion

horizontal Mullion

jamb

jamb

sill

sill

North American Glass Block design guide

jamb at interior partition

Mullion

base

Solids

Vetropieno Glass Bricks - a 100% compact glass block that combines the strength of traditional brick with the transparency and luminosity of glass. Unlike traditional products that are hollow inside, solid Vetropieno Glass Bricks deliver visual effects and movement created deep within the block that adds transparency, passage of light and new beauty to the usual properties of this construction element.

Vetropieno Glass Bricks Introduced by Seves Glass Block as part of the Design Collection, Vetropieno comes in four colors: Neutral, Blue, Nordica and Siena, and provides another glass solution for decorating interiors and exteriors, with a focus on the artistic and expressive possibilities of the material. It’s an original alternative to classic blocks that has the ability to create stunning dividing walls that allow light to pass through into each room, or special design nuances that will add a touch of style, individuality and color. The standard size and versatile shape allows it to be installed both horizontally and vertically creating smooth surfaces,traditional designs, delicate frames or colored light reflections. Vetropieno Glass Bricks have endless applications including bathrooms, kitchens, decorative columns, as well as interior and exterior pool areas, divider walls and railing structures.

Blue 9” x 4.5” x 2” 7.7 lbs

Neutro 9” x 4.5” x 2” 7.7 lbs

Blue 4.5” x 4.5” x 2” 3.75 lbs

Neutro 4.5” x 4.5” x 2” 3.75 lbs

Nordica 9” x 4.5” x 2” 7.7 lbs

Siena 9” x 4.5” x 2” 7.7 lbs

Nordica 4.5” x 4.5” x 2” 3.75 lbs

Siena 4.5” x 4.5” x 2” 3.75 lbs

Vetropieno can be installed using mortars or structural silicones. Unsupported areas should be limited to 40 s/f or less. Maximum dimensions either in height or width should not exceed 10 ft. Structural calculations may be required depending upon proposed application. Contact your SEVES Distributor for more information.

www.sevesglassblock.com

™

Product

Gridlock

Seves Glass Block, in partnership with Extech’s Gridlock™ Glass Block System (patent pending), give a new dimension to glass block wall installation. Virtually unbreakable 2” thick solid glass “snap-in blocks” simplify both installation and maintenance. Superior graffiti resistance protects against vandalism. Simple pressure wash cleaning is all you need for upkeep providing nearly zero maintenance. Numerous framing patterns and finishes let you create attractive walls that lock in long term performance!

™

Solids

Seves Glass Block + Extech Gridlock Glass Block System The fastest way to install and repair a glass block wall

• Solid glass blocks (2” thickness) are practically unbreakable • Anodized or painted rigid aluminum framing, provides unmatched durability and vandal resistance • Glass offers superior graffiti resistance • Nearly zero maintenance- simple pressure wash cleaning • No ledges to collect dirt and debris • Unlike mortared systems, joints will not deteriorate, effloresce, build-up dirt or discolor • Fully gasketed joints

Attractive and Smart

• Provides high degree of visual clarity for safety and security • Outstanding light transmission • Creative Art-in-Transit opportunities. (i.e. unlimited framing colors, etched or back screened glass blocks) • Optional bond patterns available

Flexible and Durable

• Light-weight, pre-fabricated aluminum frames are easily and quickly installed versus traditional mortar or heavy pre-glazed systems • No exposed fasteners • Individual 8”x 8” (nominal) glass block units simply snapped and permanently “locked” into place • Can be adapted to various existing opening sizes • Capable of long structural spans • Simple block “snap-in to replace” eliminates need to remove sealants or adhesives

www.sevesglassblock.com North American Glass Block design guide

— 23

Tailor Made Seves Glass Block accepts all those challenges that seem “impossible” and transforms them into actual, innovative projects. Thanks to solid, productive know-how, Seves can effectively adapt the production process of a glass block to meet a wide range of demands. Seves Glass Block prides itself on providing customize solutions to architects and designers, and works closely with design professionals during project development to create unique glass blocks that meet specific aesthetic requirements. Design professionals, you can finally put your own signature on your own glass block and give shape to your creativity.

Tailor Made

Doric

30cm x 30cm x 8cm

Doric is an extremely original glass block. For the first time, glass design has become three-dimensional showing in relief the motif of the famous columns of the Greek temples.

33cm x 33cm x 12cm

Metalized

Satinated

42cm x 42cm x 12cm

Ginza Collection

— 24

Q33 T Metalized

Q42

the panel will be 10,175 m x 4,075 m (33x13 pcs).

24cm x 24cm x 12cm The panel has to be placed in "U" frame. Every 11 glass block (horizontally) an expansion joint has to be placed. The horizontal reinforcing rods will be stopped at this point and placed new ones with the 12th glass block (until 22nd block). This joint is to be filled with polyurethane foam which also used to fix the window frames. you need to create a wooden base at the Q33 To T be able to install Q33 T the glass block panel, Curve the glass blocks and place them without back 1ofSide the panel. This2will help you to align Satinated Satinated Sides

problem. You can see also the jpg drawings to understand this wooden base. A small wooden sticks have to be place in the front side to be able to create 5 mm thick joints. This is the thicness of each joint.

1017,5

Metalized

wooden structure that work as spacers during installation. this piece w there temporarly "U" metal frame Sliding gap expansion joint cement mortar 6 mm steel reinforcing silicon sealant

Ginza comes from “Gin”, Japanese for silver. These blocks derive their lightness and brightness from the silver reflections that have been achieved with a new and exclusive metallization treatment of the lateral profile. These large blocks are ideal for exteriors and large façades and as elegant furnishing solutions for interiors.

TRAPEZOIDAL GLASS BLOCK PANEL:

Q33 O Metalized

Transparent

Side Cut Detail

Satinated

Clear

Trapezodial 30cm x 30cm The Trapezoidal block, with its square Pegasus shape, has been designed with a brand new section created by inclining the two parallel faces of the block by 5 degrees. Walls with new shapes and geometries can be created by combining, either vertically or horizontally, edges with similar or different thickness. 5

1

30

0.5

Diamante Trapezoidal glass block

Silicon sealant

8 mm steel reinforcing rod

Polyurethane foam

Silicon sealant cement mortar 6 mm steel reinforcing rods expansion joint Sliding gab "U" metal profile

30cm x 30cm x 8cm

Trapezoidal glass block

The Diamante block, with its raised diamond shaped face, has been designed to give a dramatic geometric contour to interior and exterior walls and surfaces. Diamante was exclusively custom designed with strength and style in mind. 8 mm steel reinforcing rod Silicon sealant

cement mortar

6 mm steel reinforcing rods expansion joint Sliding gab

"U" metal profile

silicon sealant 6 mm steel reinforcing rods

www.sevesglassblock.com

cement mortar Sliding gap "U" metal frame

Product

Technology The Seves Technology Line contains high performance glass blocks. These glass blocks are ideal for applications requiring light control, safety, fire resistance, structure reinforcement, heat insulation and sound proofing, in addition to traditional luminosity.

Structure Light control and diffusion, thermal insulation, fire resistance, sound proofing and bullet proofing glass block vertical wall application products are all available to suit every need. Seves also features ventilation blocks in addition to different formats and thicknesses to meet design requirements. Sizes are in Metric cm.

Clearview Satinated 1 side 11x11x8

Clearview Satinated 2 sides 11x11x8

Clearview 11x11x8

Wave Satinated 1 side 11x11x8

Wave Satinated 2 sides 11x11x8

Wave 11x11x8

Technology

Vertical

— 25

Arctic 19x19x5

Cortina 19x19x5

Wave 19x19x5

Clearview Sahara 1s 19x19x10

Cearview Sahara 2s 19x19x10

Clearview 19x19x10

Cross Large Vert 19x19x10

Cross Large 19x19x10

Cross Small Vert 19x19x10

Cross Small 19x19x10

Wave Sahara 1s 19x19x10

Slearview Satinated 1 side 24x11x8

Wave Sahara 2s 19x19x10

Clearview Satinated 2 sides 24x11x8

Select blocks available by pre-order only. Please contact Seves North American Sales at 1.855.823.4411 or 330.752.2772

Wave 19x19x10

Clearview 24x11x8

North American Glass Block design guide

Wave Satinated 1 side 24x11x8

Wave Satinated 2 sides 24x11x8

Wave 24x11x8

Structure

Vertical Continued

Clearview Satinated 1 side 24x24x8

Clearview Satinated 2 sides 24x24x8

Clearview 24x24x8

Cross Small 24x24x8

Wave Satinated 1 side 24x24x8

Wave Satinated 2 sides 24x24x8

Wave 24x24x8

Clearview Satinated 2 sides 30x30x10

Clearview 30x30x10

Cross Large 30x30x10

Wave Satinated 2 sides 30x30x10

Wave 30x30x10

Light Diffusing Vert 19x19x8

Light Directing 19x19x8

Light Diffusing 19x19x8

Create More. Wave Satinated 2 sides 19x19x5

Impact Resistant Block

Light Diffusing 19x19x10

Clearview Sahara 1s 19x19x8

All sizes are in Metric cm. Select blocks available by pre-order only. Please contact Seves North American Sales at 1.855.823.4411 or 330.752.2772

Clearview Sahara 2s 19x19x8

Clearview 19x19x8

Orsa 19x19x8

BSH-20 These blocks are available with .500 - .750 face thickness. Wave 19x19x8

Wave Sahara 1s 19x19x8

Wave Sahara 2s 19x19x8

www.sevesglassblock.com

Structure Horizontal

These paver blocks are designed for durability and high traffic while still delivering the passage of light if desired. Seves has engineered blocks capable of being featured in flooring, walkway and other design structures where maximum strength is a requirement.

Clearview 11x11x6

Circles 14x14x5

Circles 19x19x7

Technology

Clearview Sahara 1s 11x11x6

Clearview Sahara 1s 11x6

Clearview 11x6

BG Dots Satinated 1 side 19x19x8

Sizes are in Metric cm.

BG Circles 14x14x11

BG Clearview 19x19x10

BG Circles 19x19x8

BG Dots 19x19x8

BG Clearview 19x19x8

Prisma 16x16x3

Circles 20x20x2

Prisma 20x20x2

BG Clearview Sahara 2s 19x19x10

BG Clearview 19x19x8

Coperture Roofing applications that allow the passage of light without sacrificing strength are available with these Seves Technology Line products.

North American Glass Block design guide

Product

More Shapes & sizes.

BENT TILE

MARSEILLE TILE

— 27

More Technology. Photovoltaic Sun Powered Illumination Photovoltaic transforms the already eco-friendly glass block into a new building instrument, ideal for brightening exterior applications while conserving energy. The Seves Photovoltaic Collection features solar powered, low-voltage illuminating glass pavers - a fast, easy and low-cost alternative to electrical ground lighting. Add soft droplets of light to dark exteriors or create glowing walkway patterns all without the need for intricate electrical installation, wiring or maintenance. This collection is designed specifically for exterior use in commercial, public and residential applications such as walkways, sidewalks, bridges, balconies, patios, decks, and gardens as well as in exterior walls and panels.

BR11/6

B1111/6

B1919/7

SOLAR PANEL 0,13 W/4V Lifespan= +10 years

SOLAR PANEL 0,12 W/4V Lifespan= +10 years

SOLAR PANEL 0,4 W/4V Lifespan= +10 years

OPERATING Temperature -5°F to 158°F

OPERATING Temperature -5°F to 158°F

OPERATING Temperature -5°F to 158°F

BATTERY LIFE LiFePO4 3.2V/1100mAh (lifespan=max 2.000 cycles) 325mAh in 10 hours Charge Frequency 23-30mA in 14 hours (or until 2.4V) Discharge Frequency

BATTERY LIFE LiFePO4 3.2V/1100mAh (lifespan=max 2.000 cycles) 325mAh in 10 hours 25-32mA in 12 hours (or until 2.4V)

BATTERY LIFE LiFePO4 3.2V/1400mAh (lifespan=max 2.000 cycles) 1000mAh in 10 hours 76-84mA in 14 hrs. (or until 2.4V)

4 LED XZ-B5LPW4E-2D, 3000-3500MCD

8 LED XZ-B5LPW4E-2D, 3000-3500MCD

3 LED XZ-B5LPW4E-2D, 3000-3500MCD

LED/DEL Cool white 12 hours a day / 50.000 total hours of life

LED/DEL Cool white 13 hours a day / 50.000 total hours of life

MATERIAL Half-shell glass block Dimensions 4.625” x 4.625” x 2.375” Weight 2.75 lbs

MATERIAL Half-shell glass block Dimensions 7.5” x 7.5” x 2.75” Weight 6 lbs

LED / DEL Cool white 14 hours a day / 50.000 total hours of life Operating Time MATERIAL Half-shell glass block Dimensions 4.625” d x 2.375” Weight 2.4 lbs

www.sevesglassblock.com

The Energy Saving PLUS technology sets a new standard in energy conservation, making glass blocks even more eco-friendly and suitable for sustainable architecture.

Energy Saving

In fact, Seves has further reduced the thermal transmittance of the glass block to a never-before-reached level: U=.228 In 2009, Seves was the first company to revolutionize glass block with the introduction of this new “Energy Saving” technology, reducing the thermal transmittance of the classic glass block to U=.264 (from U=.493). Today Seves has rendered this technology even more effective, thanks to continuous research and investment in new ecological solutions.

—

The new Energy Saving PLUS glass block allows for an even more efficient use of energy in architecture, by providing greater control of thermal dispersion to significantly reduce its consumption. This represents a .46% increase in efficiency.

Technology Since its introduction, Energy Saving technology has improved the thermal transmission properties of the glass block. The new thermal values are achieved by inserting a low-emissive glass plate and pressure controlled Argon gas inside the glass block. The lowemissive plate interrupts the thermal bridge of the block, while the gas further reduces the heat transfer caused by convective motions. With the new Energy Saving PLUS technology, Seves has successfully lowered the levels of thermal transmittance even more thanks to the addition of a polystyrene frame between the two glass block halves, which further interrupts the thermal bridge and protects the low-emissive glass plate within.

ENERGY SAVING AND THE FUTURE Seves has always been attentive to energy conservation and to promoting a more efficient use of resources and renewable energy materials in architecture. Today, it offers professionals a new tool that significantly reduces the energy consumption of a glass structure and improves its energy efficiency. For the architect focused on ‘green’ building, who does not want to compromise on style and design, the Energy Saving PLUS glass block can add color, light, transparency AND sustainability to any project. North American Glass Block design guide

Product

Energy Saving PLUS

29

VALUES The new Energy Saving PLUS glass blocks were subjected to the necessary tests required to obtain CE certification, in compliance with the UNI EN 1051-1 and EN 1051-2 standards - as well as the following laboratory tests:  esistance to compression along the R side of the block according to the EN 1051/1:2005 standards; Resistance to thermal shock according to the EN 1051/2 2008 standards; Evaluation of the solar characteristics, according to the EN 410: 2000 standards; Calculation of the U-value according to the EN 673:2005 standards; Sound insulation according to the EN 717/1:2007 standards. All values are certified by international laboratories.

Joint Width

U-Value

2mm 5mm 10mm

.241 .243 .247

LEED for New Construction and Major Renovation 2009 Project Scorecard

Seves Glass Block use in commercial construction supports sustainable design and LEED certification.

Credits 2.1 and 2.2: Construction Waste Management -

100% recyclable…amazing durability…virtually maintenance free…glass block is the energy efficient answer to sustainable architecture. Made from the abundant natural resources of sand and limestone, glass block is the natural choice for architects wishing to add an aesthetically pleasing, yet fully functional, material to their designs.

Credits 3.1 and 3.2: Resource Reuse -

The LEED® (Leadership in Energy & Environmental Design) Green Building Rating System is the nationally recognized standard for the design and construction of high performance green buildings. No single construction material can earn LEED® points, but Seves Glass Block can be an major part of an overall strategy to earn points in specific categories: Energy & Atmosphere Maximizing energy savings in buildings through improved energy performance and energy-saving strategies such as increasing the interior daytime natural lighting will help reduce the impact structures have on our atmosphere and ecology. How Seves Glass Block can help:

Prerequisite 2: Minimum Energy Performance -

The daylighting properties of glass block can help achieve the required minimum energy performance for LEED® certification. Credit 1: Optimize Energy Performance

Glass block can support various strategies to reduce a building’s energy demand and consumption. This credit includes interior lighting energy demands and glass block can improve energy performance at a higher rate. Recent developments in the Seves Glass Blocks Energy Line have significantly improved thermal performance. Materials & Resources The production of all building materials has impact our environment. Resource conservation, reduced waste and the use of natural materials greatly reduces this impact. How Seves Glass Block can help:

The recycling of glass block manufacturing scraps and the packaging glass block is transported in can all be recycled to eliminating waste. Used and scrapped glass block can be repurposed in some jurisdictions with careful consideration. Credits 5.1 and 5.2: Regional Materials -

Glass block manufactured in a facility within 500 miles of a project site can include that percent (by weight) of the raw materials that are also within 500 miles of the project site toward the calculation of the total regionally located content in all building materials. Indoor Environmental Quality Creating indoor spaces that are healthy. How Seves Glass Block can help: Credit 4: Low Emitting Materials -

Glass block meets the intent of eliminating VOCs from the indoor environment when used as interior floors and walls. Credit 8: Daylight and Views -

Glass block provides natural daylight and allows for viewing the exterior environment without sacrificing security, structural strength and sound control. Innovation & Design Additional benefits of glass block may include resistance to hurricane, blast, intruder or ballistic threats. How Seves Glass Block can help: Credit 1 – up to three points -

Glass block can help earn points for acoustics, use of durable materials, and good indoor environmental quality (no VOC, no mold). In conclusion…It’s our world to take care of. Seves Glass Block is fully committed to assisting architects and designers in the achievement of environmental goals. A sustainable future should be a shared objective between manufacturer and designer. With energy saving glass blocks and other materials in the Seves catalog, a greener solution is available that is as economically sound as it is structurally.

www.sevesglassblock.com

Yes

?

No Sustainable Sites

Y

?

Prereq 1

Construction Activity Pollution Prevention

Required

Credit 1

Site Selection

1

Credit 2

Development Density & Community Connectivity

5

Credit 3

Brownfield Redevelopment

1

Credit 4.1

Alternative Transportation, Public Transportation Access

6

Credit 4.2

Alternative Transportation, Bicycle Storage & Changing Rooms

1

Credit 4.3

Alternative Transportation, Low-Emitting & Fuel-Efficient Vehicles

3

Credit 4.4

Alternative Transportation, Parking Capacity

2

Credit 5.1

Site Development, Protect or Restore Habitat

1

Credit 5.2

Site Development, Maximize Open Space

1

Credit 6.1

Stormwater Design, Quantity Control

1

Credit 6.2

Stormwater Design, Quality Control

1

Credit 7.1

Heat Island, Non-Roof

1

Credit 7.2

Heat Island, Roof

1

Credit 8

Light Pollution Reduction

1

No Water Efficiency

Yes

?

10 Points

Prereq 1

Water Use Reduction 20% Reduction

Required

Credit 1.1

Water Efficient Landscaping Reduce by 50%

2

Credit 1.2

Water Efficient Landscaping No Potable Use or No Irrigation

2

Credit 2

Innovative Wastewater Technologies

2

Credit 3.1

Water Use Reduction 30% Reduction

2

Credit 3.2

Water Use Reduction 40% Reduction

2

No Energy & Atmosphere

35 Points

Y

Prereq 1

Fundamental Commissioning of the Building Energy Systems

Required

Y

Prereq 2

Minimum Energy Performance

Required

Y

Prereq 3

Fundamental Refrigerant Management

Required

Credit 1

Credit 2

Optimize Energy Performance

1 to 19

12% New Building or 8% Existing Building Renovations

1

16% New Building or 12% Existing Building Renovations

3

20% New Building or 16% Existing Building Renovations

5

24% New Building or 20% Existing Building Renovations

7

28% New Building or 24% Existing Building Renovations

9

32% New Building or 28% Existing Building Renovations

11

36% New Building or 32% Existing Building Renovations

13

40% New Building or 36% Existing Building Renovations

15

44% New Building or 40% Existing Building Renovations

17

48% New Building or 44% Existing Building Renovations

19

On-Site Renewable Energy

1 to 7

1% Renewable Energy

1

5% Renewable Energy

3

9 Renewable Energy

5

13% Renewable Energy

7

Credit 3

Enhanced Commissioning

2

Credit 4

Enhanced Refrigerant Management

2

Credit 5

Measurement & Verification

3

Credit 6

Green Power

2

North American Glass Block design guide

Energy Saving / leed

Yes

26 Points

— 31

Yes

?

No Materials & Resources

Y

Yes

?

14 Points

Prereq 1

Storage & Collection of Recyclables

Required

Credit 1.1

Building Reuse Maintain 75% of Existing Walls, Floors Roof

2

Credit 1.2

Building Reuse Maintain 95% of Existing Walls, Floors Roof

1

Credit 1.3

Building Reuse Maintain 50% of Existing Walls, Floors Roof

1

Credit 2.1

Construction Waste Management Divert 50% from Disposal

1

Credit 2.2

Construction Waste Management Divert 75% from Disposal

1

Credit 3.1

Materials Reuse 5%

1

Credit 3.2

Materials Reuse 10%

1

Credit 4.1

Recycled Content 10% (post-consumer + 1/2 pre-consumer)

1

Credit 4.2

Recycled Content 20% (post-consumer + 1/2 pre-consumer)

1

Credit 5.1

Regional Materials, 10% Extracted, Processed & Manufactured Regionally

1

Credit 5.2

Regional Materials, 20% Extracted, Processed & Manufactured Regionally

1

Credit 6

Rapidly Renewable Materials

1

Credit 7

Certified Wood

1

No Indoor Environmental Quality

15 points

Y

Prereq 1

Minimum IAQ Performance

Required

Y

Prereq 2

Environmental Tobacco Smoke (ETS) Control

Required

Credit 1

Outdoor Air Delivery Monitoring

1

Credit 2

Increased Ventilation

1

Credit 3.1

Construction IAQ Management Plan, During Construction

1

Credit 3.2

Construction IAQ Management Plan, Before Occupancy

1

Credit 4.1

Low-Emitting Materials, Adhesives &Sealants

1

Credit 4.2

Low-Emitting Materials, Paints & Coatings

1

Credit 4.3

Low-Emitting Materials, Flooring Systems

1

Credit 4.4

Low-Emitting Materials, Composite Wood & Agrifiber Products

1

Credit 5.2

Indoor Chemical & Pollutant Source Control

1

Credit 6.1

Controllability of Systems, Lighting

1

Credit 6.2

Controllability of Systems, Thermal Comfort

1

Credit 7.1

Thermal Comfort, Design

1

Credit 7.2

Thermal Comfort, Verification

1

Credit 8.1

Daylight & Views, Daylight 75% of Spaces

1

Credit 8.2

Daylight & Views, Views for 90%of Spaces

1

Yes

?

No Innovation & Design Process Credit 1.1 Credit 1.2 Credit 1.3 Credit 1.4 Credit 1.5 Credit 2

Yes

?

6 points

Innovation in Design: Provide Specific Title Innovation in Design: Provide Specific Title Innovation in Design: Provide Specific Title Innovation in Design: Provide Specific Title Innovation in Design: Provide Specific Title LEED tm Accredited Professional

1 1 1 1 1 1

No Regional Bonus Credits Credit 1.1 Credit 1.2 Credit 1.3 Credit 1.4

Yes

?

4 Points

Regional Specific Environmental Priority : Regional Defined Regional Specific Environmental Priority : Regional Defined Regional Specific Environmental Priority : Regional Defined Regional Specific Environmental Priority : Regional Defined

1 1 1 1

No Project Total (Certification Estimates)

Not Certified

110 Points

Certified: 40-49 points Silver: 50-59 points Gold: 60-79 points Platinum: 80+ points

www.sevesglassblock.com

Seves Product Design and Technical Assistance Unparalleled Global Support SEVES is the only global glass block manufacturer that can provide you and your design staff technical and design support for projects around the globe. With sales and technical staff available in most countries and every continent around the world, you can feel confident in specifying any one of our over 1,000 available glass block products. Many additional services are available through SEVES’s distribution and dealer networks. They can provide valuable services such as sample selection, professional installations, on-site assistance and technical support. Call 1-855-823-4411 to find out why SEVES manufactures and sells more glass block than any other manufacturer in the world.

Seves Glass Block promises to replace any glass blocks that are found to be defective within five years from the date of purchase. Damaged glass blocks will not be replaced due to or from the result of faulty installation. Upon discovery of any defect or damage, you should send written notice to SEVES USA, 10576 Broadview Rd. Broadview Heights, Ohio 44147. Proof of purchase is required and actual glass block sample and/or photographs of glass block(s) deemed to be faulty will be required. Seves will fully review the claim and replace block(s) found to be defective by manufacturing. Seves agrees to replacement of all defective blocks excluding labor. Seves is not liable for consequential or incidental damages or injury relating to customer purchase or use of Seves Glass Block products. Warranties are limited to a five year duration time from the exact date of purchase of any Seves Glass Block product. Some states or providences may or do not currently allow the limitation or of incidental or consequential damages, or the limitation on how long an implied warranty may last - thus the above limitations may not apply to all. This warranty gives you specific legal rights - you may also have other rights which vary from state to state / providence to providence. All of the above information contained herein is as accurate and reliable to the date of publication to the best of Seves Glass Block’s knowledge. With exemption, due to Seves Glass Block having no control or direction over actual installation method and workmanship, accessory materials, or conditions during actual application, NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING THOSE OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS MADE as to the performance of an installation containing Seves Glass Block products. In no event shall Seves Glass Block be liable for any damages arising because of product failure, whether incidental, special, consequential or punitive, regardless of the theory of liability upon which any such damages are claimed.

More Patterns. More Colors. More Shapes & Sizes. More Choice.

Create More. North American Glass Block design guide

Warranty

Seves Glass Block 5 Year Limited Warranty

— 33

Interiors — 34

Interior Residential Applications

www.sevesglassblock.com

Exteriors —

Exterior Commercial Applications

North American Glass Block design guide

35

Warranty

The information contained herein is accurate and reliable to the best of our knowledge. But, because SEVES has no control over installation, workmanship, accessory materials or conditions of application, No Express or Implied Warranty of any Kind, Including those of merchantability or fitness for a particular purpose is made as to the performance of an installation containing SEVES products. In no event shall SEVES be liable for the damages arising because of failure, whether incidental, special, consequential or punitive, regardless of theory of liability upon which any such damages are claimed. SEVES provides written warranties for many of its products, and such warranties take precedence over the statements contained herein.

Seves Glass Block 1-855-823-4411 www.sevesglassblock.com North American Sales Office SEVES USA - Glass Block Division 10576 Broadview Road Broadview Hts., Ohio 44147 330-752-2772