Information procedure
Monthly Notifications Register
Notifications registered at CCMC from 2010-09-01 to 2010-09-30
Register issued on : 2010-10-07 A list of subsectors can be found at the end of this document.
Page 1
Information procedure
Monthly Notifications Register
Notifications registered at CCMC from 2010-09-01 to 2010-09-30 Sector A : SERVICES
Register issued on : 2010-10-07
Page 2
Page 3 Subsector A09: FACILITY MANAGEMENT Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
A09 BSI United Kingdom 01001929/0001
Registration Date :
2010-09-03
Project Established
BS 8210 Guide to facilities maintenance management New
Note: This notification was initially registered on 2010-08-03 under an incorrect subsector. ** End of Subsector ** Subsector A99: UNDETERMINED Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
A99 Registration Date : 2010-09-13 ASI Austria 00023395/0001 Project Established 03.100.01, 03.160 ÖNORM A 2060 General conditions of contracts - Contract Clauses 5 to 10 of this Austrian Standard include the general terms and conditions for contracts such as supply services, including possibly required assembly works as well as for object-related services. Building and civil engineering construction works are specified in ÖNORM B 2110 or ÖNORM B 2118. New
** End of Subsector ** ** End of Sector **
Information procedure
Monthly Notifications Register
Notifications registered at CCMC from 2010-09-01 to 2010-09-30 Sector B : BUILDING AND CONSTRUCTION
Register issued on : 2010-10-07
Page 4
Page 5 Subsector B01: FIRE PROTECTION Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
B01 Registration Date : 2010-09-13 ASI Austria 00023415/0001 Project Established 13.220.20 ÖNORM F 3072 Planning, development, installation, commissioning and maintenance of wet extinguishing systems This ÖNORM is applicable for planning, development, installation, commissioning and maintenance of wet extinguishing systems, water spray systems and foam systems up to a nominal pressure of 25,0 bar. This ÖNORM is also applicable for specific types of wet extinguishing systems which are dirctly connected with fire incident control systems. Aim of this ÖNORM is the assignment of duties for experts and instructed persons. New
B01 Registration Date : 2010-09-13 ASI Austria 00023455/0001 Project Established 91.140.30 ÖNORM H 6027 Ventilation and air conditioning plants - Fire doors and shutters for air distribution systems on the basis of intumescent materials with or without mechanical closing element - Complementary requirements to ÖNORM EN 15650 This Austrian Standard specifies the complementary national requirements relating to ÖNORM EN 15650 for fire doors and shutters on the basis of intumescent materials with or without mechanical closing element. New
B01 Registration Date : 2010-09-13 ASI Austria 00023494/0001 Project Established 91.140.30 ÖNORM H 6025 Ventilation and airconditioning plants - Fire dampers - Complementary requirements to ÖNORM EN 15650 This Austrian Standard includes complementary national requirements relating to ÖNORM EN 15650 for fire dampers intended to prevent the propagation of fire and smoke. New
** End of Subsector ** Subsector B02: STRUCTURES Subsector : Organization :
B02 BSI
Registration Date : Draft Issue Date :
2010-09-01 2010-08-18
Page 6 Country :
United Kingdom
Project ID :
01002282/0001
ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Latest Date for Comments :
2010-09-30 Draft for public enquiry
NA TO BS EN 1991-1-4:2005+A1 UK National Annex to Eurocode 1. Actions on structures. Part 1-4. General actions. Wind actions. Amendment New
B02 Registration Date : 2010-09-16 SUTN Slovakia 73003010/0001 Project Established 91.080 STN 73 0032 Calculation of building structures loaded with dynamic effects of machines According the resolution of national TC Actions on structures there is need for revision of this national standard, mainly evaluation of its provisions comparing with Eurocodes (namely EN 1993-6 Crane supporting structures) and updating of normative references. REV/AMD
STN 73 0032
** End of Subsector ** Subsector B05: FIRE TESTS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
B05 Registration Date : 2010-09-13 ASI Austria 00023407/0001 Project Established 13.220.50, 91.060.10 ÖNORM B 3800-9 Fire behaviour of building materials and components - Part 9: Testing standard for partition walls and exterior walls with combustible parts - Requirements, tests and evaluations This standard defines a fire testing procedure for building contructions with essential parts made out of combustible materials to prove that these combustible materials don´t provide any contribution to the fire over the whole classification period of the building construction itself. In principle partition walls and exterior walls are differentiated. New
** End of Subsector ** Subsector B09: THERMAL MATTERS Subsector : Organization : Country : Project ID : ICS :
B09 SIST Slovenia 00005278/0001 91.100.50
Registration Date : 2010-09-28 Draft Issue Date : 2011-02-01 Latest Date for Comments : 2011-04-01 Draft for public enquiry
Page 7 National Ref : Title : Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
SIST 1031:2011 Flexible sheets for waterproofing - Bitumen sheets for waterproofing – Requirements SIST 1031 defines national requirements which supplement European standards and which are not in conflict with them. The standard contains clearly-defined criteria for the essential characteristics of materials with regard to climate conditions in our country. New
B09 Registration Date : 2010-09-13 ASI Austria 00023414/0001 Project Established 91.120.10 ÖNORM B 8110-5/A Thermal insulation in building construction - Part 5: Model of climate and user profiles (Amendment) Due to the experience the software industry gained with validation by executing ÖNORM B 8110-5:2010 as well as the appendant ÖNORMEN B 8110-5 supplement 1 and supplement 2 a revision is necessary. New
** End of Subsector ** Subsector B13: SOLAR ENERGY Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
B13 Registration Date : 2010-09-13 ASI Austria 00023457/0001 Project Established 27.160 ÖNORM M 7777 Solar thermal systems - Hydraulic circuits and standstill performance This Austrian Standard applies to small and average solar heating systems intended for hot water production, heating support and general thermal use up to 50 m², excepting drain back and thermal siphon systems. New
** End of Subsector ** Subsector B17: LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
B17 UNMZ Czech Republic 73012610/0001
Registration Date : 2010-09-29 Draft Issue Date : 2010-09-30 Latest Date for Comments : 2010-11-30 Draft for public enquiry
Daylighting in buildings – Part 1: Basic Requierements Up-dating according to experience with using Standard.
Page 8 Relatedness : National :
REV/AMD
Amendment Z1 of ČSN 73 0580-1
** End of Subsector ** Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
B25 Registration Date : 2010-09-13 ASI Austria 00023456/0001 Project Established 27.060.20 ÖNORM M 7428 Mechanically operated flue gas dampers for gas appliances This ÖNORM contains terms and definitions, requirements as well as provisions for the marking and testing of mechanically operated flue gas dampers for gas appliances, which are tested and approved as separate component. The flue gas dampers are designed for the fitting into couplings for gas appliances with gas burner or atmosperic burners. The flue gas dampers can also be fitted into facilities with burners without fans in front of or behind of the draugth diverter. New
** End of Subsector ** Subsector B26: ROAD BUILDING AND MAINTENANCE Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
B26 Registration Date : 2010-09-29 BDS Bulgaria Latest Date for Comments : 2010-11-20 BG068004/0001 Draft for public enquiry 93.080.20 BDS EN 13108-1:2006/NA - Amendment 1 Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete This is Amendment to National Annex BDS EN 13108-1:2006/NA.
Relatedness : National :
REV/AMD
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
B26 Registration Date : 2010-09-29 BDS Bulgaria Latest Date for Comments : 2010-11-20 BG068005/0001 Draft for public enquiry 93.080.20 BDS EN 13108-5:2006/NA - Amendment 1 Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt This is Amendment to National Annex BDS EN 13108-5:2006/NA.
Relatedness : National :
REV/AMD
BDS EN 13108-1:2006/NA
BDS EN 13108-5:2006/NA
** End of Subsector **
Page 9 Subsector B33: BUILDING DESIGN Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
B33 Registration Date : 2010-09-23 SUTN Slovakia 73005610/0001 Project Established 91.120.10 STN 73 0540-2 Thermal performance of buildings and components. Thermal protection of buildings. Part 2: Functional requirements Revision of the national standard is necessary for updating the requirements according the new Energy Performance of Buildings Directive. It is also necessary to update the references to European and International standards REV/AMD
STN 73 0540-2
B33 Registration Date : 2010-09-23 SUTN Slovakia 73005710/0001 Project Established 91.120.10 STN 73 0540-3 Thermal performance of buildings and components. Thermal protection of buildings. Part 3: Properties of environment and building products Revision of the national standard is necessary for updating the data of products and material properties according the current knowledge. It is also necessary to update the references to european and international standards REV/AMD
STN 73 0540-3
** End of Subsector ** Subsector B99: UNDETERMINED Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
B99 Registration Date : 2010-09-13 ASI Austria 00023403/0001 Project Established 91.010.20 ÖNORM B 1801-3 Project and object management in construction - Part 3: Follow-up costs for constructions This Austrian Standard applies to the structure and presentation of costs in object management during the phases of object use and disposal. This Austrian Standard is the basis for the cost preview (forecast) and the costing of object usage costs in structured groups. The costs of object construction in new buildings and alterations are captured in accordance with ÖNORM B 1801-1.
Relatedness : National :
New
Subsector :
B99
Registration Date :
2010-09-13
Page 10 Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
ASI Austria 00023404/0001 Project Established 91.010.20 ÖNORM B 2110 General conditions of contract for works of building and civil engineering construction Works contract Clauses 5 to 12 of this Austrian Standard give the general terms of contracts for works of building and civil engineering construction. Jointly with the standards to be quoted in the contract (e.g. Austrian Standards with technical content), the provisions of this ÖNORM are intended to represent the consistent terms of building contracts. The relevant particular conditions for individual cases shall be specified by the building works themselves as well as by the specific circumstances of the performance delivery. As a whole, a complete description and clear specification of the construction work agreed upon should be reached by this procedure. New
B99 Registration Date : 2010-09-13 ASI Austria 00023405/0001 Project Established 91.010.20, 93.040, 93.060, 93.080.01 ÖNORM B 2118 General conditions of contract for works of building and civil engineering construction with partnership model, particularly for the execution of major construction - Works contract Clauses 5 to 12 of this Austrian Standard give the general terms of contracts for works of building and civil engineering construction using a partnership model. This ÖNORM applies to major constructions and complex building projects. Jointly with the standards to be quoted in the contract (e.g. Austrian Standards with technical content), the provisions of this ÖNORM are intended to represent the consistent terms of building contracts. The relevant particular conditions for individual cases shall be specified by the building works themselves as well as by the specific circumstances of the performance delivery. This ÖNORM does not apply to consumer transactions. New
** End of Subsector ** ** End of Sector **
Information procedure
Monthly Notifications Register
Notifications registered at CCMC from 2010-09-01 to 2010-09-30 Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS
Register issued on : 2010-10-07
Page 11
Page 12 Subsector C02: PAINTS AND RELATED PRODUCTS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
C02 DIN Germany 00200684/0001
Registration Date :
2010-09-15
Project Established
00200684 Paints and varnishes - Determination of pH - Part 2: ISFET electrodes New
** End of Subsector ** Subsector C99: UNDETERMINED Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
C99 DIN Germany 01200330/0001
Registration Date :
2010-09-15
Project Established
01200330 Weld flanges for pressure vessels, solid New
** End of Subsector ** ** End of Sector **
Information procedure
Monthly Notifications Register
Notifications registered at CCMC from 2010-09-01 to 2010-09-30 Sector F : FUNDAMENTAL STANDARDS
Register issued on : 2010-10-07
Page 13
Page 14 Subsector F01: TECHNICAL DRAWINGS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
F01 Registration Date : 2010-09-13 ASI Austria 00023394/0001 Project Established 01.100.30, 91.080.40 ÖNORM A 6220 Construction drawings for reinforcement bars in reinforced concrete structures Instructions for bending and steel scheduling This standard is valid for all types of reinforcement bars and gives requirements for the drawings of steel bars for the reinforcement of concrete and steel scheduling (graphical instructions). This standard supplements ÖNORM EN ISO 3766. New
** End of Subsector ** Subsector F23: ENERGY Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
F23 Registration Date : 2010-09-13 ASI Austria 00023416/0001 Project Established 91.140.10 ÖNORM H 5056/A Energy performance of buildings - Energy use for heating systems (Amendment) Due to the experience the software industry gained with validation by executing ÖNORM H 5056:2010 as well as the appendant ÖNORMEN H 5056 supplement 1, supplement 2 and supplement 3 a revision is necessary. New
F23 Registration Date : 2010-09-13 ASI Austria 00023417/0001 Project Established 91.140.30 ÖNORM H 5057/A Energy performance of buildings - Energy use for ventilation systems of residental and non-residental buildings (Amendment) Due to the experience the software industry gained with validation by executing ÖNORM H 5057:2010 a revision is necessary.
Relatedness : National :
New
Subsector : Organization : Country : Project ID : ICS :
F23 ASI Austria 00023418/0001 91.140.30
Registration Date :
2010-09-13
Project Established
Page 15 National Ref : Title : Scope : Relatedness : National :
ÖNORM H 5058/A Energy performance of buildings - Energy use for cooling systems (Amendment) Due to the experience the software industry gained with validation by executing ÖNORM H 5058:2010 a revision is necessary. New
** End of Subsector ** Subsector F99: UNDETERMINED Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
F99 BSI United Kingdom 01002552/0001
Registration Date :
2010-09-01
Project Established
BS 8888 Technical product specification New
** End of Subsector ** ** End of Sector **
Information procedure
Monthly Notifications Register
Notifications registered at CCMC from 2010-09-01 to 2010-09-30 Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE
Register issued on : 2010-10-07
Page 16
Page 17 Subsector H19: NON-ELECTRIC COOKERS AND BARBECUES Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
H19 Registration Date : 2010-09-13 ASI Austria 00023396/0001 Project Established 91.010.20, 91.180, 97.100.30 ÖNORM B 2233 Setting up of tiled stoves - Works contract This Austrian Standard includes procedure instructions and contractual provisions for setting up of tiled stoves. It applies analogously also to other potter and stove systems.
Relatedness : National :
New
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
H19 Registration Date : 2010-09-13 ASI Austria 00023397/0001 Project Established 01.040.97, 97.100.30 ÖNORM B 8300 Execution of stove fitter works - Terms and definitions This Austrian Standard containes terms and definitions of stove fitter systems.
Relatedness : National :
New
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
H19 Registration Date : 2010-09-13 ASI Austria 00023398/0001 Project Established 97.100.30 ÖNORM B 8301 Dimensioning of tiled stoves - Requirements This Austrian Standard includes requirements for manually set tiled stoves. They are applicable to wood fired tiled stoves with fuel filling capacities between 10 kg and 40 kg and nominal heating times of 8 h to 24 h. This ÖNORM shall be applied jointly with ÖNORM B 8302 and ÖNORM B 8303. New
H19 Registration Date : 2010-09-13 ASI Austria 00023399/0001 Project Established 97.100.30 ÖNORM B 8303 Dimensioning of titled stoves - Testing This Austrian Standard shall be applied to the testing of stationary set, wood fired tiled stoves on the test bench. It gives test methods necessary to fulfil the requirements of ÖNORM B 8301.
Page 18 Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
New
H19 Registration Date : 2010-09-13 ASI Austria 00023400/0001 Project Established 97.100.30 ÖNORM B 8304 Material for tiles - Ceramic stove tiles - Requirements, tests This Austrian Standard specifies requirements for ceramic stove tiles (hereinafter referred to as stove tiles) and their tests. New
H19 Registration Date : 2010-09-13 ASI Austria 00023401/0001 Project Established 97.100.30 ÖNORM B 8305 Material for tiles - Construction elements of ceramic tiles - Requirements, tests This Austrian Standard specifies requirements for material for tiles, their tests and their marking.
Relatedness : National :
New
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
H19 Registration Date : 2010-09-13 ASI Austria 00023402/0001 Project Established 91.100.10, 97.100.30 ÖNORM B 8308 Mortar for stover fitter works - General requirements, tests This Austrian Standard specifies test methods for mortar for stove fitter works.
Relatedness : National :
New
** End of Subsector ** Subsector H99: UNDETERMINED Subsector : Organization : Country : Project ID : ICS : National Ref :
H99 DIN Germany 14900072/0001 14900072
Registration Date :
2010-09-15
Project Established
Page 19 Title : Relatedness : National :
Entertainment technology - Machinery installations - Safety requirements and inspections New
** End of Subsector ** ** End of Sector **
Information procedure
Monthly Notifications Register
Notifications registered at CCMC from 2010-09-01 to 2010-09-30 Sector I : MECHANICAL ENGINEERING
Register issued on : 2010-10-07
Page 20
Page 21 Subsector I05: IRON PIPES Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
I05 DIN Germany 01200329/0001
Registration Date :
2010-09-15
Project Established
01200329 Swirlpipes - Dimensions and materials; Amendment 1 New
** End of Subsector ** Subsector I09: SMALL TOOLS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
I09 DIN Germany 12800230/0001
Registration Date :
2010-09-15
Project Established
12800230 Properties and their scopes for product data exchange - Part 4: Terminological rules for attributes for entities New
** End of Subsector ** Subsector I17: MACHINERY IN GENERAL (INCLUDING SAFETY) Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
I17 Registration Date : 2010-09-13 ASI Austria 00023474/0001 Project Established 13.110 ONR ISO/TR 23849 Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safetyrelated control systems for machinery (German version of ISO/TR 23849:2010) This Technical Report is intended to explain the application of IEC 62061 and ISO 13849-11 in the design of safety-related control systems for machinery. New
** End of Subsector ** Subsector I19: NUCLEAR ENERGY Subsector : Organization : Country : Project ID : ICS :
I19 ASI Austria 00023514/0001 11.040.50
Registration Date :
2010-09-30
Project Established
Page 22 National Ref : Title : Scope :
Relatedness : National :
ÖNORM S 5240-12 Image quality assurance in X-ray diagnosis - Part 12: Acceptance testing of mammographic X-ray equipment This ÖNORM applies to the acceptance testing of analog, i.e. conventionel mammographic systems (film-screen-mammography, FFM), digital mammographic systems (full field digital mammography, FFDM). This standard does not apply to digital mammogramms, produced earlier by film-screen systems and digitised later, mammographic stereotaxis-equipment and particular devices for biopsy. Alternative testing procedure may be used provided that the same or better sensitivty against potential changes in the mammographic equipment is ensured (e.g. EUREF mammography screening guidance documents). New
** End of Subsector ** Subsector I28: FLUID POWER Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
I28 DIN Germany 06002814/0001
Registration Date :
2010-09-15
Project Established
06002814 Hydraulic fluid power - Hose assemblies - Dimensions, requirements New
** End of Subsector ** Subsector I30: AIR DISTRIBUTION Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
I30 Registration Date : 2010-09-13 ASI Austria 00023454/0001 Project Established 91.090, 91.140.30 ÖNORM H 6003 Ventilation for garages - Principles, planning, dimensioning This Austrian Standard is applicable to the planning, execution and operation of ventilation and air conditioning systems for garages where for spark ignition motor vehicles with or without catalyst as well as compression ignition (diesel) motor vehicles are operated. As garages are understood spaces intended to shelter automobiles. This ÖNORM does not apply to rooms within garages intended for other purposes, such as working rooms, storage rooms, etc. This ÖNORM can be applied analogously for the operation of motor vehicles run with gas (natural gas, LPG) as well as for the operation and the charging of electrically driven automobiles, provided their pollutant emissions as well as particular safety requirements are taken into account. New
** End of Subsector ** ** End of Sector **
Information procedure
Monthly Notifications Register
Notifications registered at CCMC from 2010-09-01 to 2010-09-30 Sector M : METALLIC MATERIALS
Register issued on : 2010-10-07
Page 23
Page 24 Subsector M01: STEEL Subsector : Organization : Country : Project ID : ICS : National Ref : Title :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
M01 (Secondary Subsector) BSI United Kingdom 01001827/0001
Registration Date :
2010-09-01
Draft Issue Date : 2010-07-23 Latest Date for Comments : 2010-09-30 Draft for public enquiry
BS 2HR 650 Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (Limiting ruling section 20 mm) New
M01 (Secondary Subsector) BSI United Kingdom 01002465/0001
Registration Date :
2010-09-01
Project Established
BS 2S 201:2004+A1 Carbon steel wire rod, patented cold drawn carbon steel wire and springs. High duty unground wire. Specification. Amendment New
M01 (Secondary Subsector) BSI United Kingdom 01002466/0001
Registration Date :
2010-09-01
Project Established
BS 2S 202:2004+A1 Carbon steel wire rod, patented cold drawn carbon steel wire and springs. High duty ground wire. Specification. Amendment New
M01 (Secondary Subsector) BSI United Kingdom 01002467/0001
Registration Date :
2010-09-01
Project Established
BS 2S 203:2004 Corrigendum 1 Carbon steel wire rod, wire and springs. High duty unground wire. Hardened and tempered. Specification. Corrigendum New
Page 25
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
M01 (Secondary Subsector) BSI United Kingdom 01002468/0001
Registration Date :
Project Established
BS 2S 204:2004 Corrigendum 1 Chromium-vanadium steel wire rod, wire and springs. High duty ground wire. Hardened and tempered. Specification. Corrigendum New
M01 DIN Germany 11903040/0001
Registration Date :
2010-09-15
Project Established
11903040 Hydraulic steel structures - Part 1: Criteria for design and calculation New
M01 DIN Germany 11903041/0001
Registration Date :
2010-09-15
Project Established
11903041 Hydraulic steel structures - Part 2: Design and manufacturing New
M01 DIN Germany 11903043/0001
Registration Date :
2010-09-15
Project Established
11903043 Hydraulic steel structures - Part 3: Electrical equipment New
** End of Subsector ** Subsector M14: NICKEL
2010-09-01
Page 26 Subsector : Organization : Country : Project ID : ICS : National Ref : Title :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
M14 (Secondary Subsector) BSI United Kingdom 01001824/0001
Registration Date :
2010-09-01
Draft Issue Date : 2010-07-23 Latest Date for Comments : 2010-09-30 Draft for public enquiry
BS 2HR 505 Specification for nickel-chromium-iron-titanium-niobium-aluminium heat-resisting alloy round wire for thread inserts with a maximum diameter of 2 mm (nickel base Cr 15.5, Fe 7.0, Ti 2.5, Nb/Ta 0.95, Al 0.70) New
M14 (Secondary Subsector) BSI United Kingdom 01001825/0001
Registration Date :
2010-09-01
Draft Issue Date : 2010-07-30 Latest Date for Comments : 2010-09-30 Draft for public enquiry
BS 2HR 506 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire: softened (nickel base Cr 19.5, Co 1.8, Ti 2.5, Al 1.5) New
M14 (Secondary Subsector) BSI United Kingdom 01001826/0001
Registration Date :
2010-09-01
Draft Issue Date : 2010-07-23 Latest Date for Comments : 2010-09-30 Draft for public enquiry
BS 4HR 601 Specification for nickel-chromium-titanium-aluminium heat-resisting alloy bar and wire (maximum diameter or minor sectional dimension of 30 mm) for the manufacture of fasteners (nickel base, Cr 19.5, Ti 2.2, Al 1.4) New
M14 (Secondary Subsector) BSI United Kingdom 01002469/0001
Registration Date :
2010-09-01
Project Established
BS 2S 205:2004 Corrigendum 1 Austenitic chromium-nickel steel wire rod, wire and springs. Specification. Corrigendum New
Page 27 ** End of Subsector ** ** End of Sector **
Information procedure
Monthly Notifications Register
Notifications registered at CCMC from 2010-09-01 to 2010-09-30 Sector N : NON-METALLIC MATERIALS
Register issued on : 2010-10-07
Page 28
Page 29 Subsector N03: PETROLEUM PRODUCTS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
N03 Registration Date : 2010-09-28 SIST Draft Issue Date : 2010-12-01 Slovenia Latest Date for Comments : 2011-02-01 00005277/0001 Draft for public enquiry 75.160.20 oSIST 1020:2010 Liquid Petroleum Products - Determination of mark indikator content in Fuel Oil Extra Light and petroleum In this standard are test methods for determination of mark indicator content in Fuel Oil Extra Light and petroleum. New
N03 DIN Germany 06233555/0001
Registration Date :
2010-09-15
Project Established
06233555 Testing of lubricants - Determination of flow pressure of lubricating greases using Kesternich method - ... New
N03 DIN Germany 06233556/0001
Registration Date :
2010-09-15
Project Established
06233556 Liquid fuels - Fuel oils - Part 4: Fuel oils R; requirements, testing New
** End of Subsector ** Subsector N14: PLASTICS PIPES Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
N14 Registration Date : 2010-09-13 ASI Austria 00023409/0001 Project Established 23.040.50, 23.040.60 ÖNORM B 5130 Plastics piping systems for non-pressure drainage and sewerage made of polyester resin concrete (PRC) according to ÖNORM EN 14636-1 - Part 1: Supplementary requirements to ÖNORM EN 14636-1, procedure for the proof of conformity This ÖNORM is intended to be used jointly with ÖNORM EN 14636-1. It contains specifications supplementary to ÖNORM EN 14636-1, which have to met in order to comply with the procedure for the proof of conformity of products laid down in the National
Page 30 Scope : Relatedness : National :
Annex of ÖNORM EN 14636-1 corresponding to ON-V 243 as well as the marking of products in accordance with §3 (2) Federal Act on Standardization of 1971. New
** End of Subsector ** ** End of Sector **
Information procedure
Monthly Notifications Register
Notifications registered at CCMC from 2010-09-01 to 2010-09-30 Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT
Register issued on : 2010-10-07
Page 31
Page 32 Subsector S09: WATER QUALITY AND WATER SUPPLY Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
S09 AENOR Spain P0031019/0002
Registration Date :
2010-09-27
Latest Date for Comments : 2010-11-06 Draft for public enquiry
PNE 149101 Validation of equipment used in the treatment of drinking water in the interior of buildings. It establishes the application criteria in order to determinate if an equipment of a specific treatment of drinking water may used without transmission of harmful pollutants for health New
** End of Subsector ** Subsector S24: SOIL QUALITY Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
S24 DIN Germany 11903002/0001
Registration Date :
2010-09-15
Project Established
11903002 Soil quality New
** End of Subsector ** Subsector S26: ENVIRONMENTAL MANAGEMENT Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
S26 Registration Date : 2010-09-30 NSAI Ireland 01078873/0001 Project Established 13.040 SWiFT 7 Verification of environmental parameters for domestic coal supplied to the market in Ireland Specification provides a methodology whereby coal that is compliant with the requirements of Irish legislation can be verified. REV/AMD
SWiFT 7
** End of Subsector ** Subsector S99: UNDETERMINED Subsector : Organization : Country :
S99 DIN Germany
Registration Date :
2010-09-15
Page 33 Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
08000169/0001
Project Established
08000169 Recording of the medical application of ionizing radiation - Part 2: Diagnosis and therapy using unsealed radioactive materials New
S99 DIN Germany 08000170/0001
Registration Date :
2010-09-15
Project Established
08000170 Special radiotherapy equipments - Part 4: Intensity-modulated radiation therapy Constancy testing New
** End of Subsector ** ** End of Sector **
Information procedure
Monthly Notifications Register
Notifications registered at CCMC from 2010-09-01 to 2010-09-30 Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING
Register issued on : 2010-10-07
Page 34
Page 35 Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
T01 DIN Germany 13202221/0001
Registration Date :
2010-09-15
Project Established
13202221 Ventilation plants for ships - Terminology New
** End of Subsector ** Subsector T02: AEROSPACE Subsector : Organization : Country : Project ID : ICS : National Ref : Title :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title :
Relatedness : National :
T02 BSI United Kingdom 01001824/0001
Registration Date : 2010-09-01 Draft Issue Date : 2010-07-23 Latest Date for Comments : 2010-09-30 Draft for public enquiry
BS 2HR 505 Specification for nickel-chromium-iron-titanium-niobium-aluminium heat-resisting alloy round wire for thread inserts with a maximum diameter of 2 mm (nickel base Cr 15.5, Fe 7.0, Ti 2.5, Nb/Ta 0.95, Al 0.70) New
T02 BSI United Kingdom 01001825/0001
Registration Date : 2010-09-01 Draft Issue Date : 2010-07-30 Latest Date for Comments : 2010-09-30 Draft for public enquiry
BS 2HR 506 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire: softened (nickel base Cr 19.5, Co 1.8, Ti 2.5, Al 1.5) New
T02 BSI United Kingdom 01001826/0001
Registration Date : 2010-09-01 Draft Issue Date : 2010-07-23 Latest Date for Comments : 2010-09-30 Draft for public enquiry
BS 4HR 601 Specification for nickel-chromium-titanium-aluminium heat-resisting alloy bar and wire (maximum diameter or minor sectional dimension of 30 mm) for the manufacture of fasteners (nickel base, Cr 19.5, Ti 2.2, Al 1.4) New
Page 36 Subsector : Organization : Country : Project ID : ICS : National Ref : Title :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title :
T02 BSI United Kingdom 01001827/0001
Registration Date : 2010-09-01 Draft Issue Date : 2010-07-23 Latest Date for Comments : 2010-09-30 Draft for public enquiry
BS 2HR 650 Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (Limiting ruling section 20 mm) New
T02 BSI United Kingdom 01002465/0001
Registration Date :
2010-09-01
Project Established
BS 2S 201:2004+A1 Carbon steel wire rod, patented cold drawn carbon steel wire and springs. High duty unground wire. Specification. Amendment New
T02 BSI United Kingdom 01002466/0001
Registration Date :
2010-09-01
Project Established
BS 2S 202:2004+A1 Carbon steel wire rod, patented cold drawn carbon steel wire and springs. High duty ground wire. Specification. Amendment New
T02 BSI United Kingdom 01002467/0001
Registration Date :
2010-09-01
Project Established
BS 2S 203:2004 Corrigendum 1 Carbon steel wire rod, wire and springs. High duty unground wire. Hardened and tempered. Specification. Corrigendum
Relatedness : National :
New
Subsector : Organization : Country :
T02 BSI United Kingdom
Registration Date :
2010-09-01
Page 37 Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
01002468/0001
Project Established
BS 2S 204:2004 Corrigendum 1 Chromium-vanadium steel wire rod, wire and springs. High duty ground wire. Hardened and tempered. Specification. Corrigendum New
T02 BSI United Kingdom 01002469/0001
Registration Date :
2010-09-01
Project Established
BS 2S 205:2004 Corrigendum 1 Austenitic chromium-nickel steel wire rod, wire and springs. Specification. Corrigendum New
T02 BSI United Kingdom 01002542/0001
Registration Date :
2010-09-01
Project Established
BS A 275-A 280:1981+A2 Hexagon self-locking nuts with non-metallic locking inserts. Metric series. Amendment New
** End of Subsector ** Subsector T09: MATERIALS HANDLING AND STORAGE EQUIPMENT Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
T09 Registration Date : 2010-09-13 ASI Austria 00023408/0001 Project Established 55.180.99 ÖNORM B 4920-3 Terminals for transshipment of goods - Planning - Part 3: Railway sidings This ÖNORM is to be used as basis for the planning of new railway sidings for cargo transfer and for changes of existing plants. It is valid in principle for railway sidings with a rule track gauge of 1,435 mm (standard gauge) and can be used in a general manner also for railway sidings with other track gauges (narrow gauge). New
** End of Subsector ** Subsector T16: LIFTS & ESCALATORS
Page 38 Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
T16 Registration Date : 2010-09-13 ASI Austria 00023406/0001 Project Established 13.220.01, 91.140.90 ÖNORM B 2474 Fire control systems for passenger and goods lifts - Supplementary provisions to ÖNORM EN 81-73 This ÖNORM is valid for new passenger and goods lifts and specifies in dependence of the building classes (in accordance with OIB guidelines) and the use of the building, how back transmitter of lifts are to be implemented in accordance with ÖNORM EN 81-73. New
** End of Subsector ** Subsector T20: TRAM- AND RAILWAY ENGINEERING Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
T20 DIN Germany 08700806/0001
Registration Date :
2010-09-15
Project Established
08700806 Adhesive bonding of railway vehicles and parts - Part 4: Manufacturing controls and quality assurance New
** End of Subsector ** ** End of Sector **
2010-08
List of non-electrotechnical subsectors Sector A: Services Subsector
Title
ISO/TC reference
CEN/TC reference
A01
Tourist services
/
329; CEN/WS ETO
A02
Cleaning services
/
328
A03
Postal services
/
331
A04
Transportation services
/
320; CEN/WS 016
A05
Maintenance services
/
319
A06
Building and construction services
/
330
A07
Translation services
/
A08
Funeral services
/
CEN/BT/TF 139
A09
Facility management
/
348
A10
Services of Real Estate Agents
/
CEN/BT/TF 180, 373
A11
Security Services
/
CEN/BT/TF 167; 391; 384; 370; CEN/WS 044
A12
Consultancy Services
/
395; 381
A99
Undetermined
/
CEN/WS 002 CEN/WS 004 CEN/WS 037 CEN/WS 039 CEN/WS 041 CEN/WS 051 375; 374; 376; 385 404
Sector B: Building and construction Subsector
Title
ISO/TC reference
CEN/TC reference
B01
Fire protection
21
70; 72; 191; 192
B02
Structures
59; 98
166; 167; 250; 277; 346; 349 284; 288; 297; 340;
B03
Concrete
71
104; CEN/WS 009
B04
Cement
74; 77
51
B05
Fire tests
92
127
B06
Gypsum
/
241
B07
Glass
160
129
B08
Doors and windows
162
33
B09
Thermal matters
163
88; 89; 371 CEN/BT WG 173 CEN/WS 036
B10
Timber structures
165
124
B11
Metal structures
167
135
B12
Masonry
179; 196
125; 246
B13
Solar energy
180
312
B14
Geotechnics
182
341; 396
B15
Sanitary appliances
/
163; 7
B16
Taps
/
/
B17
Lighting equipment and lighting application technology
/
50; 169
B18
Scaffolding
/
53
B19
Ceramic tiles
189
67
B20
Drainage equipment
/
165
B21
Baths
/
/
B22
Wallcoverings
/
99
B23
District heating
/
107
B24
Auxiliary and handicraft work
/
/
B25
Gas distribution installation and related equipment
/
234; 235; 282
B26
Road building and maintenance
/
178; 227
B27
Waterproofing materials
/
128; 254; 361; 314
B28
Floor coverings
38/SC 12
134
B29
Aggregates
/
154
B30
Floor and surfacing
/
217; 303; 323; 390
B31
Heating systems in buildings
/
228; 247
B32 B33
Precast concrete products Building design
/ 205
177; 229 315; 325; 388
B34
Building and construction – Environmental aspect
350; 351
B99
Undetermined
/
/
Sector C: Chemicals, chemical engineering and food products Subsector
Title
ISO/TC reference
CEN/TC reference
C01
Food products
34
174; 275; 302; 360 307; 327; 338; 387 CEN/WS 008 CEN/WS 018
C02
Paints and related products
35
139; 298; 173
C03
Chemistry
47
317; 363
C04
Laboratory glassware
48
332
C05
Lac
/
/
C06
Essential oils
54
/
C08
Pesticides
81
/
C09
Surfactants
91
276
C10
Starch
93
/
C11
Tobacco
126
401
C12
Glass plant
/
/
C13
Fertilizers
134
223; 260
C16
Wood preservatives
/
/
C17
Trees and plants
/
/
C18
Adhesives
/
193
C19
Chemical analysis
201; 202
382; 347
C20
Explosives and firework
/
212; 321
C21
Cosmetics
217
392
C99
Undetermined
/
386
Sector F: Fundamental standards Subsector
Title
ISO/TC reference
CEN/TC reference
F01
Technical drawings
10
/
F02
Units & symbols
12
/
F03
Preferred numbers
19
/
F04
Sieves
24
/
F05
Measuring instruments
30; 113
92; 171; 176; 237; 294; 318; 244; 367 141; CEN/WS 011
F06
Terminology principles
37
/
F07
Documentation and information
46
304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368
F08
Surfaces
/
290
F09
Banking
68
/
F10
Statistics
69
/
F12
Information processing systems
204
224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365
F13
Environmental tests
/
/
F14
Graphical technology, sign-boards and nameplates
130
/
F15
Material testing in general
135
138; CEN/WS 007 CEN/WS 021 CEN/WS 033
F16
Graphical symbols
145
/
F17
Administrative documents
154
CEN/WS MMU
F18
Micrographics
171
/
F19
Optics
172; 187
123; 170
F20
Quality assurance
176
CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362
F21
Value analysis and project network
/
279
F22
Logistics
/
379; 273
F23
Energy
203
CEN/CLC/JWG 3 CEN/CLC/JWG 4 CEN/WS 027
F99
Undetermined
/
389
Sector H: Products for household and leisure use Subsector
Title
ISO/TC reference
CEN/TC reference
H01
Cinematography
36
372
H02
Photography
42
/
H03
Consumer questions
/
291
H04
Sports equipment
83
136
H05
Oil and gas burners
/
47; 131
H06
Horology
114
/
H07
Space heating
116
62; 110; 130; 179; 180
H08
Sizing systems
133; 137
/
H09
Furniture
136
207
H10
Sewing machines
148
/
H11
Heater controls
161
58
H12
Ceramic and glass-ware for food
166
/
H13
Jewellery
174
CEN/WS 047
H14
Caravans
177
245
H15
Toys
181
52
H17
Oil stoves
/
46
H18
Central heating boilers
/
48; 57; 109; 269
H19
Non-electric cookers and barbecues
/
49; 281; 295
H22
Smokers’ lighters and matches
/
355; 87
H23
Ladders
/
93
H24
Tactile danger warnings
/
/
H25
Large gas appliances
/
106; CEN/CLC/JWG FCGA
H26
Sealing materials
/
108; 208
H27
Educational equipment
/
/
H28
Hunting
191
/
H29
Heat pumps
/
113
H30
Equipment for children
/
252
H31
Dedicated LPG appliances
/
181
H32
Culinary utensils
186
194
H33
Footwear (excluding protective footwear)
/
309
H34
Child safety
/
CEN/BT/WG 117 398
H99
Undetermined
/
299; 364; 369; 402
Sector I: Mechanical engineering Subsector
Title
ISO/TC reference
CEN/TC reference
I01
Screw threads
1
/
I02
Fasteners
2
185
I03
Limits & fits
/
/
I04
Rolling bearings
4
/
I05
Iron pipes
5
203
I06
Pressure vessels
11
54
I07
Shafts
14
/
I08
Agricultural machines
23
144, 334
I09
Small tools
29
213
I10
Splines
/
/
I11
Machine tools
39
142; 143; 145; 255
I12
Pulleys & belts
41
188
I13
Gas containers
58
23; 286
I14
Gears
60
/
I15
Equipment for petroleum industry
67
12
I16
Internal combustion engines
70; 192
270
I17
Machinery in general (including safety)
72; 199
114; 153; 214; 313 271, 337; 399; 397 CEN/WS 025
I18
Mining
82
196
I19
Nuclear energy
85
/
I20
Refrigeration
86
44; 182
I21
Chains and chain wheels
100
/
I22
Vacuum technology
112
/
I23
Pumps
115
197
I24
Industrial fans
117
356
I25
Compressors
118
232
I26
Plain bearings
123
/
I27
Earth moving and construction equipment
127; 195
151
I28
Fluid power
131
/
I29
Gas cleaning
/
195
I30
Air distribution
/
156
I31
Valves
153; 185
69; 236; 105
I32
Flanges
/
74
I33
Information processing in automation
184
310
I34
Non-ferrous metallic pipes
/
/
I35
Leisure and recreational machines
/
152
I36
Thermoprocessing technology
/
186
I37
Printing and paper machines
/
198
I38
Leather production, tannery and related machinery
/
200; 201
I39
Machines for metal processing
/
202; 322
I40
Industrial piping networks
/
267
I41
Membrane filters
/
272
I42
Potentially explosive atmospheres
/
305
I43
Hydrogen energy
197
/
I44
Nanotechnologies
229
352
I99
Undetermined
/
CEN/CLC/JTF PE; CEN/CLC/TC 2 65, 157
Sector M: Metallic materials Subsector
Title
ISO/TC reference
CEN/TC reference
M01
Steel
17
CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110
M02
Zinc
/
209
M03
Foundry technology,
25
190; ECISS/TC 31 ECISS/TC 111
including cast iron M04
Copper
26
133
M05
Welding
44
121
M06
Dimensions of wrought products
/
/
M07
Manganese and chromium
65
/
M08
Light alloys
79
132
M09
Iron ores
102
/
M10
Metallic coatings
107
240
M11
Powder metallurgy
119
/
M12
Aluminium ores
129
/
M13
Ferroalloys
132
/
M14
Nickel
155
/
M15
Metallic corrosion
156
262; 219
M16
Mechanical tests for metals
164
ECISS/TC 1 ECISS/TC 2 ECISS/TC 101
M17
Heavy metal ores
183
/
M18
Metal wire products
/
ECISS/TC 30 CEN/BT/TF 196 378
M20
Tin and tin alloys
/
220
M21
Precious metals
/
283
M22
Lead and lead alloys
/
306
M99
Undetermined
/
/
Sector N: Non-metallic materials Subsector
Title
ISO/TC reference
CEN/TC reference
N01
Paper and board
6
172
N02
Solid fuels
27
335; 343;383 CEN/WS 019
N03
Petroleum products
28
19; 336 CEN/WS 038
N04
Refractories
33
187
N05
Textiles
38
189; 248
N06
Rubber
45
218; 366 CEN/WS 003
N07
Sawn timber
55
38; 175
N08
Mica
/
/
N09
Plastics
61
249
N10
Cork
87
/
N11
Wood-based panels
89
112
N12
Timber products
99
/
N13
Leather
120
289
N14
Plastics pipes
138
155
N17
Fluorspar
175
/
N18
Glass-fibre reinforced plastics
/
/
N19
Tapes
/
253
N20
Ceramics
206
184
N21
Gaseous fuels and combustible gas
158; 193
238
N22
Feather and related materials
/
222
N99
Undetermined
/
/
Sector S: Health, environment and medical equipment Subsector
Title
ISO/TC reference
CEN/TC reference
S01
Acoustics and sound insulation
43
126; 211
S02
Transfusion equipment
76
/
S03
Syringes
84
/
S04
Protective clothing and equipment
94
85; 158; 159; 160; 161; 162 CEN/WS 026
S05
Dentistry
106
55
S06
Vibration & shock
108
231
S07
Anaesthetic and respiratory equipment
121
215
S08
Air quality
146
137; 243; 264; CEN/CLC WG/CMI
S09
Water quality and water supply
147
164; 230; CEN/WS 001 CEN/WS 034
S10
Surgical implants
150
285; CEN/CLC JWG/AIMD
S11
Contraceptives
157
/
S12
Gas analysis
/
/
S13
Ergonomics
159
122
S14
Prosthetics
168
/
S15
Surgical instruments
170
/
S16
Aids for the disabled
173
293
S17
Respiratory protective devices
/
79
S18
Sterilization of equipment
198
102; 204
S19
First aid equipment and rescue systems
/
239
S20
Waste collection, handling and transportation
/
183
S21
Laboratory medicine, clinical pathology and biosafety
194
140; 206; 233; 257; 258; 316 CEN/CLC/TC 3 CEN/WS 031 CEN/WS 053
S22
Energy saving
/
CEN/WS 005 CEN/WS 015
S23
Personal & property protection against aggression/Burglary protection
/
263
Soil quality
190
345; CEN/WS 032
S24
S25
Chemical disinfectants and antiseptics
/
216
S26
Environmental management
207
CEN/WS 040
S27
Waste - Characterization, treatment and streams
/
292; 308; CEN/BT/TF 120
S28
Demining
/
CEN/WS 029 CEN/WS 013
S99
Undetermined
/
205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; 403 CEN/WS PCEC CEN/WS 012 CEN/WS 020
Sector T: Transport, mechanical handling and packaging Subsector
Title
ISO/TC reference
CEN/TC reference
T01
Shipbuilding and maritime structures
8; 188
15; 300
T02
Aerospace
20
274; AECMA; ECSS 377
T03
Road vehicles
22
301; 326 CEN/WS IMA
T04
Tyres
31
/
T05
Pallets
51
/
T06
Metal and plastic containers
52
210; 221; 265; 266; 268; 296 393
T07
Glass containers
63
/
T08
Cranes
96
147
T09
Materials handling and storage equipment
101
148; 149
T10
Freight containers
104
119; 280
T11
Steel wire ropes
105
/
T12
Industrial trucks
110
150; 324
T13
Lifting chains, hooks and ropes
111
168
T14
Packaging
122
261; 120
T15
Cycles
149
333
T16
Lifts & escalators
178
10; 242
T17
Builders hoists
/
/
T18
Elevating platforms
/
98
T19
Road safety
/
226; 339
T20
Tram- and railway engineering
/ /
256; CEN/CLC WG/FPR
T21
Packaging machines
/
146
T22
Off-road vehicles
/
354
T99
Undetermined
/
CEN/WS TAF
Sector Z: Information technology Subsector
Title
ISO/TC
CEN/TC
Z01
Radiocommunication for IT
/
/
Z02
Telephony, telegraphy for IT
/
CEN/CLC - ETSI
Z03
Common O.S.I. activities
/
CEN/CLC - EWOS
Z99
Undetermined
/
353; CEN/WS DFA CEN/WS DIR CEN/WS EBES CEN/WS ECH CEN/WS ECO CEN/ES EFI CEN/WS ESI CEN/WS FAS CEN/WS FUN CEN/WS IEC CEN/WS JXF CEN/WS LCT CEN/WS LTS CEN/WS MDC CEN/WS MET CEN/WS POR CEN/WS URI CEN/WS XFS CEN/WS ORC CEN/WS CTC CEN/WS XML CEN/WS MEE CEN/WS SCE CEN/WS MES CEN/WS UDP CEN/WS MMI CEN/WS FS2 CEN/WS AUT CEN/WS ICT CEN/WS KMA CEN/WS TEX CEN/WS SAN CEN/WS DPP CEN/WS HIC CEN/WS MLX CEN/WS eGO CEN/WS BII CEN/WS ADN CEN/WS CAT CEN/WS CST CEN/WS DIS CEN/WS ESR CEN/WS EUR CEN/WS FIN CEN/WS GEN CEN/WS ISD CEN/WS NEA CEN/WS NOM
CEN/WS QIS CEN/WS TWE CEN/WS WAC CEN/WS eIN CEN/WS ePR