Information procedure
Monthly Notifications Register
Notifications registered at CCMC from 2010-07-01 to 2010-07-31
Register issued on : 2010-08-02 A list of subsectors can be found at the end of this document.
Page 1
Information procedure
Monthly Notifications Register
Notifications registered at CCMC from 2010-07-01 to 2010-07-31 Sector B : BUILDING AND CONSTRUCTION
Register issued on : 2010-08-02
Page 2
Page 3 Subsector B01: FIRE PROTECTION Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
B01 DIN Germany 03100749/0001
Registration Date :
2010-07-13
Project Established
03100749 Bridges for fire hoses - Part 1: Bridges of rubber for fire hoses New
B01 DIN Germany 03100750/0001
Registration Date :
2010-07-13
Project Established
03100750 Fire fighting equipment - Trough New
B01 DIN Germany 03100751/0001
Registration Date :
2010-07-13
Project Established
03100751 Boxes for fire equipment - Boxes made of wood, light metal and light metal/wood New
B01 Registration Date : 2010-07-08 NEN Netherlands 50001580/0001 Project Established 13.220.20 NPR 6095-1:2010 Concept nl Smoke and heat control systems - Part 1: Guidelines on design and installation of smoke and heat exhaust installations In this code of practice design and assessment guidelines forinstallation technical facilities of smoke and heat exhaust ventilation systems, are given. The requirements for the assesment of smoke and heat exhaust ventilation installations are given in the Dutch standard NEN 6093:1995. This code of practice deals with mechanical as well as natural smoke and heat exhaust ventilation systems. New
** End of Subsector **
Page 4 Subsector B02: STRUCTURES Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
B02 Registration Date : 2010-07-13 ASI Austria 00023334/0001 Project Established 91.010.30 ÖNORM B 1990-1 Eurocode - Basis of structural design - Part 1: Building construction - National specifications concerning ÖNORM EN 1990 This Austrian Standard specifies national parameters relating to ÖNORM EN 1990 Annex A1 "Application for buildings" and shall be applied jointly with ÖNORM EN 1990. New
B02 Registration Date : 2010-07-13 ASI Austria 00023335/0001 Project Established 91.010.30 ÖNORM B 1991-1-5 Eurocode 1 - Actions on structures - Part 1-5: General actions - Thermal actions National specifications concerning ÖNORM EN 1991-1-5 This Austrian Standard specifies national parameters to ÖNORM EN 1991-1-5 and shall be applied jointly with ÖNORM EN 1991-1-5 in Austria. EN 1991-1-5 gives principles and rules for calculating thermal actions on buildings, bridges and other structures including their structural elements. Principles needed for cladding and other appendages of buildings are also provided. This Part describes the changes in the temperature of structural elements. Characteristic values of thermal actions are presented for use in the design of structures which are exposed to daily and seasonal climatic changes. Structures not so exposed may not need to be considered for thermal actions. Structures in which thermal actions are mainly a function of their use (e.g. cooling towers, silos, tanks, warm and cold storage facilities, hot and cold services etc) are treated as well. New
B02 Registration Date : 2010-07-13 ASI Austria 00023336/0001 Project Established 93.040 ÖNORM B 4021 Equipment for bridge bearings - Requirements, manufacturing and production control In this standard all specific requirements concerning equipment of bridge bearings are stated. This standard supplements series ÖNORM EN 1337, where general rules for bearings are given. This standard is also valid for bridge bearings which are covered by other technical specifications. New
Page 5 Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness :
B02 Registration Date : 2010-07-13 ASI Austria 00023339/0001 Project Established 01.040.91, 91.060.40 ÖNORM B 8200 Chimneys - Terms and definitions This Austrian Standard specifies terms and definitions of building parts, which act for combustion gases as well as for the supply or exhaust of air. This standard does not reply to horizontal combustion air without redirection to the outside of gas heating appliances at the exterior wall. New
B02 Registration Date : 2010-07-13 ASI Austria 00023340/0001 Project Established 91.060.40 ÖNORM B 8205 Chimneys - Planning, execution and maintenance This Austrian Standard shall be applied for planing and execution of connecting pipes and chimneys for the exit of combustion gases of heating appliances which operates with solid, liquid or gas fuels as well as e.g. for the exit of combustion gases from heat pumps. New
B02 MSZT Hungary 34811401/0001 91.060.40
Registration Date : Draft Issue Date :
2010-07-22 2010-06-29
Project Established
Design, installation and inspection of chimneys REV/AMD
MSZ 845
B02 Registration Date : 2010-07-22 UNI Italy 73032420/0001 Project Established 53.080 U73032420 Steel static storage systems - Cantilever racks - Principles for structural design This standard provides calculation methods for the design of steel cantilever racking. Technical requirements, particularly referred to unit load types, installation conditions, allowable deflections are also defined.
Page 6 National :
New
** End of Subsector ** Subsector B04: CEMENT Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
B04 AENOR Spain P0036118/0001
Registration Date :
2010-07-29
Project Established
PNE 80220 Cement test methods. Chemical analysis. Moisture determination. This standard defines a method for the moisture determination in common cements and cements with special characteristics. REV/AMD
UNE 80220:2000
B04 AENOR Spain P0036120/0001
Registration Date :
2010-07-29
Project Established
PNE 80402/1M Cement. Delivery conditions. This project modifies the published standard UNE 80402 with regard the tolerances at delivery of the bags (when cement is delivered in bags). REV/AMD
UNE 80402:2008
** End of Subsector ** Subsector B05: FIRE TESTS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
B05 UNMZ Czech Republic 73008610/0001
Registration Date : 2010-07-23 Draft Issue Date : 2010-09-01 Latest Date for Comments : 2010-11-30 Draft for public enquiry
Fire protection of buildings - Assembly rooms The aim of the revision is unification of contemporary legislation and related Czech Standards. Use of new information for fire safety engineering of buildings. REV/AMD
CSN 73 0831 (2001)
Page 7 Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
B05 UNMZ Czech Republic 73008710/0001
Registration Date : 2010-07-23 Draft Issue Date : 2010-07-01 Latest Date for Comments : 2010-09-30 Draft for public enquiry
Fire pretection of buildings - Buildings for dwelling and lodging The aim of the revision is unification of contemporary legislation and related Czech Standards. Use of new information for fire safety engineering of buildings. REV/AMD
CSN 73 0833 (1996)
B05 UNMZ Czech Republic 73008810/0001
Registration Date : 2010-07-23 Draft Issue Date : 2010-11-01 Latest Date for Comments : 2011-02-28 Draft for public enquiry
Fire protection of buildings - Changes of buildings The aim of the revision is unification of contemporary legislation and related Czech Standards. Use of new information for fire safety engineering of buildings. REV/AMD
CSN 73 0834 (2000)
** End of Subsector ** Subsector B08: DOORS AND WINDOWS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
B08 MSZT Hungary 34810101/0001 91.060.50
Registration Date : Draft Issue Date :
2010-07-22 2010-07-01
Project Established
Windows and doors. Requirements for use REV/AMD
MSZ 9333
** End of Subsector ** Subsector B09: THERMAL MATTERS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
B09 UNMZ Czech Republic 72009809/0001
Registration Date : 2010-07-23 Draft Issue Date : 2010-03-30 Latest Date for Comments : 2010-09-01 Draft for public enquiry
Thermal insulation products for building application – Part 3: Factory made products of extruded polystyrene foam (XPS) The aim is to determine factual parametres of thermal insulation products made of XPS for specific usage in construction
Page 8 Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
REV/AMD
CSN 72 7221-3
B09 UNMZ Czech Republic 73009210/0001
Registration Date : 2010-07-23 Draft Issue Date : 2010-06-30 Latest Date for Comments : 2010-09-01 Project Established
Thermal protection of buildings – Part 2: Requirements Ammending of CSN 73 0540-2 in connection with new technical findings and analyses REV/AMD
CSN 73 0540-2 (2007)
B09 UNMZ Czech Republic 73010810/0001
Registration Date : 2010-07-23 Draft Issue Date : 2010-09-30 Latest Date for Comments : 2010-12-01 Project Established
Hygrotermal performance of buildings - Calculation and presentation of climatic data Part 4: Hourly data for assesing the annual energy use for heating and cooling (ISO 15927-4:2005) Development of national annex to CSN EN ISO 15927-4 that will contain climatic data for the Czech Republic. REV/AMD
CSN EN ISO 15927-4 (2006)
** End of Subsector ** Subsector B10: TIMBER STRUCTURES Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
B10 UNMZ Czech Republic 48000310/0001
Registration Date : 2010-07-23 Draft Issue Date : 2010-05-31 Latest Date for Comments : 2010-07-31 Published Standard
Forest reproductive material The Amendment 2 of the Czech standard ČSN 48 2115 is based on the new scientific knowledge and states standard quality of some types of bare-rooting or containerized planting stock more precisely. It newly defines parameters of large-sized planting stock (saplings) and fast-growing tree species (Populus and Salix). Concerning the changes of the standard the appropriate texts were completed.
Relatedness : National :
REV/AMD
Subsector : Organization :
B10 NEN
CSN 48 2115:1998
Registration Date :
2010-07-08
Page 9 Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Netherlands 50001579/0001 Project Established 79.040 NEN 5461:2010 Concept nl Requirements for timber (KVH 2000) - Sawn timber and round wood - General part This standard gives terminology and methods of research concerning measurements, moisture measurement and imperfections of wood. This standard also gives fundamentals of acceptance inspection by sampling or by complete assessment. New
** End of Subsector ** Subsector B21: BATHS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
B21 Registration Date : 2010-07-13 ASI Austria 00023343/0001 Project Established 97.220.10 ÖNORM M 6219-3 Requirements for public and commercial sauna installations, infrared cabins, steam and other warm chambers - Part 3: Planning and operation of hot air chambers with additional moistening These ÖNORM describes requirements for steam and hot air chambers for wellness uses with additional moistening which are not established in timber-frame construction manner. She is not valid for chambers which serve medical-therapeutic purposes. New
** End of Subsector ** Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
B25 Registration Date : 2010-07-08 NEN Netherlands 50001572/0001 Project Established 91.140.40 NPR 3378-20:2010 Concept nl Guidelines for NEN 1078 - Part 20: Decorative log fire appliances This code of practice describes an installation mode for gasfired atmospheric heating with an open or closed heating system. Decorative log fire appliances are open systems. Heating is not the main function of atmospheric appliances.
Relatedness : National :
New
Subsector : Organization : Country : Project ID : ICS :
B25 NEN Netherlands 50001573/0001 91.140.40
Registration Date :
2010-07-08
Project Established
Page 10 National Ref : Title : Scope : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
NPR 3378-21:2010 nl Guidelines for NEN 1078 - Part 21: Gas cooking appliances in a kitchen In this code of practice an installation method is decribes for type A gas cooking appliances in a kitchen of a dwelling. New
B25 Registration Date : 2010-07-08 NEN Netherlands 50001574/0001 Project Established 91.140.40 NPR 3378-22:2010 Concept nl Guidelines for NEN 1078 - Part 22: Installation spaces of gas appliances, appliance rooms and boiler rooms This code of practice gives gidelines for installation spaces of gas appliances, appliance rooms and boiler rooms. New
** End of Subsector ** Subsector B26: ROAD BUILDING AND MAINTENANCE Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
B26 Registration Date : 2010-07-20 SNV Draft Issue Date : 2010-07-19 Switzerland Latest Date for Comments : 2010-09-17 CH100015/0001 Draft for public enquiry 93.080.01 SN 507701d General Conditions for Roads and Traffic, Chapters 17, 18 and appendix B; Changes and additions in chapters 11, 12 and 20 REV/AMD
SN 507701c
** End of Subsector ** Subsector B27: WATERPROOFING MATERIALS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
B27 AENOR Spain P0036119/0001
Registration Date :
2010-07-29
Project Established
PNE 88113 Fibre-cement profiled sheets incorporating PUR and polyester coating at the bottom, and fittings - Requirements and test methods This document specifies the technical requirements and establishes the test methods for fibre-cement profiled sheets incorporating PUR and polyester coating at the bottom, and its fittings. This document covers fibre-cement profiled sheets that incorporate in a second production process a PUR layer between the fibre-cement and a polyester coating placed at the
Page 11 Scope :
Relatedness : National :
bottom. This is done by means of an individual injection system. The final product is a slab with better mechanical characteristics and more anti-corrosive resistance. For the purpose of this documentm fibre-cement profiled sheets are classified according to their height of corrugation and their mechanical characteristics. This document does not include calculations with regard to works, design requirements, installation techniques, wind uplift or rain proofing of the installed sheets. New
** End of Subsector ** Subsector B29: AGGREGATES Subsector : Organization : Country : Project ID : ICS : National Ref : Title :
B29 Registration Date : 2010-07-02 SUTN Slovakia 72003710/0001 Project Established 19.060, 91.100.15 STN 72 1171 Determination of mass, porosity and ratio of aggregates
Relatedness : National :
REV/AMD
STN 72 1171
** End of Subsector ** Subsector B33: BUILDING DESIGN Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
B33 MSZT Hungary 34800107/0001 91.040.10
Registration Date : Draft Issue Date :
2010-07-22 2010-06-03
Project Established
Design requirements of educational institutions. Nurseries REV/AMD
MSZ 24210
** End of Subsector ** Subsector B99: UNDETERMINED Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
B99 BSI United Kingdom 01001802/0001
Registration Date :
2010-07-01
Project Established
BS 1722-2:2006 Corrigendum 1 Fences. Part 2. Specification for strained wire and wire mesh netting fences. Corrigendum New
Page 12 Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
B99 BSI United Kingdom 01001803/0001
Registration Date :
2010-07-01
Project Established
BS 1722-5:2006 Corrigendum 1 Fences. Part 5. Specification for close-boarded and wooden palisade fences. Corrigendum New
** End of Subsector ** ** End of Sector **
Information procedure
Monthly Notifications Register
Notifications registered at CCMC from 2010-07-01 to 2010-07-31 Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS
Register issued on : 2010-08-02
Page 13
Page 14 Subsector C01: Food products Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
C01 DIN Germany 05701436/0001
Registration Date :
2010-07-13
Project Established
05701436 Sensory analysis - Basic principles New
C01 Registration Date : 2010-07-16 UNI Italy 59007820/0001 Project Established 67.020 U59007820 Food services - Minimum requirements for the drafting of specifications , tendering notifications and regulations This standard specifies the minimum requirements to be reported in specifications , tendering notifications and regulations for food services. New
C01 Registration Date : 2010-07-22 UNI Italy 59007890/0001 Project Established 67.020 U59007890 Fishery products - Requirements of the fishery chain This standard specifies the requirements of the production process in the fishery chain aiming at the qualification of the fresh fish product intended for human consumption. New
C01 Registration Date : 2010-07-22 UNI Italy 59007940/0001 Project Established 67.020 U59007940 Agricultural products and foodstuffs - Guidelines for the definition and use of optional reserved terms This standard specifies guidelines for the definition and use of agricultural products optional reserved terms. New
Page 15
** End of Subsector ** Subsector C13: FERTILIZERS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
C13 Registration Date : 2010-07-13 ASI Austria 00023342/0001 Project Established 13.080.10 ÖNORM L 1202 Chemical analysis of soils - Decomposition procedure for the determination of total elements This ÖNORM describes a method for complete digestion of nutrients and harmful elements in soils. New
C13 Registration Date : 2010-07-13 ASI Austria 00023344/0001 Project Established 13.030.40 ÖNORM S 2027-1 Describing the biological reactivity of mechanically-biologically pretreated residual wastes - Part 1: Sampling This ÖNORM is part of the series ÖNORM S 2027 "stability parameters for the assessment of waste from mechanical-biological treatment". The studies under this ÖNORM series for the evaluation of biological reactivity as one of the parameters for the assessment of the deposition ability of mechanically-biologically treated waste thereof. This part 1 of this series of standards describes the sampling of waste from mechanical-biological treatment up to the production of the field sample. The objective is a uniform sampling for the determination of all the necessary parameters in accordance with landfill ordinance 2008. New
C13 Registration Date : 2010-07-13 ASI Austria 00023345/0001 Project Established 13.030.40 ÖNORM S 2027-2 Stability parameters describing the biological reactivity of mechanically-biologically pretreated residual wastes - Part 2: Gas generation by incubation test (GS21) This ÖNORM is part of the standard series ÖNORM S 2027 "stability parameters for the assessment of mechanicalbiological pretreated waste. The studies under this series of standards for the evaluation of biological reactivity as one of the parameters for the assessment of the deposition ability of mechanically-biologically pretreated waste thereof. This part 2 of this series of standards describes the process of determining the gas-sum donations by incubation for 21 days. The gas donations over different periods eg 90 days, but can be determined similarly to this ÖNORM by appropriate extension of the evaluation
Page 16 Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
period. The extension of the assessment observation period allows a more thorough evaluation of the gas formation potential (eg from source materials lien for the anaerobic treatment). New
C13 Registration Date : 2010-07-13 ASI Austria 00023346/0001 Project Established 13.030.40 ÖNORM S 2027-3 Stability parameters describing the biological reactivity of mechanically-biologically pretreated residual wastes - Part 3: Gas generation by fermentation test (GB21) This ÖNORM is part of the series ÖNORM S 2027 "stability parameters for the assessment of waste from mechanical-biological treatment". The studies under this ÖNORM series for the evaluation of biological reactivity as one of the parameters for the assessment of the deposition ability of mechanically-biologically treated waste thereof. This part 3 of this series of standards describes the process of determining the gas formation in the fermentation test for 21 days. The gas formation over different periods eg 48 days, may be required in the second extension of the reporting period was determined similarly to this ÖNORM. The extension of the evaluation period allows a more accurate assessment of gas generation potential (eg, from source-materials for the anaerobic treatment). New
C13 Registration Date : 2010-07-13 ASI Austria 00023347/0001 Project Established 13.030.40 ÖNORM S 2027-4 Stability parameters describing the biological reactivity of mechanically-biologically treated residual wastes - Part 4: Respiration activity (AT4) This ÖNORM is part of the series ÖNORM S 2027 "stability parameters for the assessment of waste from mechanical-biological treatment". The studies under this ÖNORM series are for the assessment of the biological reactivity as one of the parameters for the assessment of the deposition ability of mechanically-biologically treated waste thereof. Furthermore, this ÖNORM can be to assess progress during the composting of mechanical-biological treatment of waste applied. This part 4 of this series of standards describes the process of determining the respiratory activity over four days in the laboratory. The respiratory activity over different periods, eg 7 days, can be determined similarly to this ÖNORM by appropriate extension of the evaluation period. New
** End of Subsector ** Subsector C16: WOOD PRESERVATIVES Subsector :
C16
Registration Date :
2010-07-16
Page 17 Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
UNI Italy 40005770/0001 Project Established 79.040 U40005770 Durability of wood and wood-based products - Guidelines for use of European standards This technical report gives a guidelines for the use of European standards published by CEN/TC 38. New
** End of Subsector ** Subsector C17: TREES AND PLANTS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
C17 Registration Date : 2010-07-08 SUTN Slovakia 46001210/0001 Project Established 67.060 STN 46 1300-1 Pulses. Part 1: Common regulations The revision of national Slovak standard will update common regulation for pulses regarding to latest references of testing methods CEN or ISO. REV/AMD
STN 46 1300-1
** End of Subsector ** Subsector C20: EXPLOSIVES AND FIREWORKS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
C20 Registration Date : 2010-07-08 NEN Netherlands 50001577/0001 Project Established 13.230, 29.260.20 NPR 7910-1:2010 Concept nl Classification of hazardous areas with respect to explosion hazard - Part 1: Gas explosion hazard, based on NEN-EN-IEC 60079-10-1:2009 Describes the conversion procedure for the determination of the thermal performance of factory made solar domestic hot water systems, based on Dutch refrence conditions. It applies to all types of solar domestic hot water systems (SDHW systems) that can be tested according to ISO 9459-5 or NEN-EN 12976.
Relatedness : National :
New
Subsector : Organization : Country : Project ID : ICS : National Ref :
C20 NEN Netherlands 50001578/0001 13.230, 29.260.20 NPR 7910-2:2010 Concept nl
Registration Date :
2010-07-08
Project Established
Page 18 Title : Scope :
Relatedness : National :
Classification of hazardous areas with respect to explosion hazard - Part 2: Dust explosion hazard, based on NEN-EN-IEC 61241-10-2:2009 This Dutch code of practice gives guidelines to formulate a classification of hazardous areas with respect to explosion hazard. This code of practice is a help for the practical application of NEN-EN-IEC 61241-10 and is to be used in relation to this standard. The application can be in the industrial sector as well as the mining sector. New
** End of Subsector ** Subsector C99: UNDETERMINED Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
C99 Registration Date : 2010-07-15 SUTN Slovakia 46001310/0001 Project Established 65.120 STN 46 7020 Animal feeding stuffs. Determination of calcium content by three different methods The national Slovak standard will specify three methods of calcium content determination: by titrimetric manganometric method, by gravimetric method for very low contents and by titrimetric chelatometric method. This method will suport the EC Regulation no. 152/2009. REV/AMD
STN 46 7092-12, STN 46 7013-4-7
C99 Registration Date : 2010-07-15 SUTN Slovakia 46001410/0001 Project Established 65.120 STN 46 7021 Animal feeding stuffs. Determination of phosphorus content by gravimetric method The national Slovak standard will specify the method of phosphorus content determination by gravimetric method, it can be used for the animal feeding stuffs analyse with high phosphorus content. This method will support the EC Regulation No. 152/2009. REV/AMD
STN 46 7092-11
C99 Registration Date : 2010-07-15 SUTN Slovakia 46001510/0001 Project Established 65.120 STN 46 7022 Animal feeding stuffs. Determination of added methionin The national Slovak standard will specify the method of added methionin content determination. This method will support the EC Regulation no. 152/2009. REV/AMD
STN 46 7013-5-2
Page 19
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
C99 Registration Date : 2010-07-15 SUTN Slovakia 46001610/0001 Project Established 65.120 STN 46 7023 Animal feeding stuffs. Determination of added lysine-hydrochlorid by ITP technics The national Slovak standard will specify the method of added lysin-hydrochlorid content determination by ITP technics. This method will support the EC Regulation no. 152/2009. REV/AMD
STN 46 7013-5-1
** End of Subsector ** ** End of Sector **
Information procedure
Monthly Notifications Register
Notifications registered at CCMC from 2010-07-01 to 2010-07-31 Sector F : FUNDAMENTAL STANDARDS
Register issued on : 2010-08-02
Page 20
Page 21 Subsector F05: MEASURING INSTRUMENTS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
F05 (Secondary Subsector) BSI United Kingdom 01001661/0001
Registration Date :
2010-07-01
Project Established
BS 2000-0.1 Methods of test for petroleum and its products. Part 0.1. General introduction. Specifications. IP standard for thermometers (Identical with IP-Annex A) New
** End of Subsector ** Subsector F08: SURFACES Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
F08 Registration Date : 2010-07-13 ASI Austria 00023341/0001 Project Established 01.100.20 ÖNORM ISO 10579 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts This International Standard gives rules for dimensioning and tolerancing non-rigid parts where restraining of features is required during verification of dimensions and tolerances specified on a drawing. New
** End of Subsector ** Subsector F19: OPTICS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
F19 DIN Germany 02702339/0001
Registration Date :
2010-07-13
Project Established
02702339 Production in optical engineering - Diamond impregnated cup wheels - Part 8: With hollow taper shank connection New
** End of Subsector ** Subsector F99: UNDETERMINED Subsector : Organization : Country :
F99 UNI Italy
Registration Date :
2010-07-16
Page 22 Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
14C80690/0001 Project Established 35.100.05 E14C80690 Road traffic and transport telematics - Automatic dynamic debiting systems and automatic access control systems using GNSS/CN - Localization augmentation communication for GNSS/CN systems over UNI 10607 DSRC On-board units working with satellite positioning to collect data required for charging for the use of roads operate in an autonomous way, i.e. without relying on dedicated road-side infrastructure. However, some situations (e.g. when satellite signals are not perceived), require that positioning information be updated by road stations via dedicated short range communications. This standard defines the types of data and the DSRC exchanges when the communication medium is based on the UNI 10607:2007, Parts 1 to 4, standard. New
** End of Subsector ** ** End of Sector **
Information procedure
Monthly Notifications Register
Notifications registered at CCMC from 2010-07-01 to 2010-07-31 Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE
Register issued on : 2010-08-02
Page 23
Page 24 Subsector H07: SPACE HEATING Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
H07 BSI United Kingdom 01001726/0001
Registration Date :
2010-07-01
Project Established
BS 6230 Specification for installation of gas-fired forced convection air heaters for commercial and industrial space heating (2nd and 3rd family gases) New
** End of Subsector ** Subsector H08: SIZING SYSTEMS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
H08 DIN Germany 06233523/0001
Registration Date :
2010-07-13
Project Established
06233523 Footwear - Sizes of shoes for children New
** End of Subsector ** Subsector H18: CENTRAL HEATING BOILERS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
H18 BSI United Kingdom 01001725/0001
Registration Date :
2010-07-01
Project Established
BS 6644 Specification for installation of gas-fired hot water boilers of rated inputs between 70kW (net) and 1.8 MW (net) (2nd and 3rd family gases New
** End of Subsector ** Subsector H19: NON-ELECTRIC COOKERS AND BARBECUES Subsector : Organization : Country : Project ID : ICS : National Ref : Title :
H19 BSI United Kingdom 00902086/0001
Registration Date : 2010-07-01 Draft Issue Date : 2010-06-28 Latest Date for Comments : 2010-08-31 Draft for public enquiry
BS 6172 Specification for installation, servicing and maintenance of domestic gas cooking appliances (2nd and 3rd family gases)
Page 25 Relatedness : National :
New
** End of Subsector ** ** End of Sector **
Information procedure
Monthly Notifications Register
Notifications registered at CCMC from 2010-07-01 to 2010-07-31 Sector I : MECHANICAL ENGINEERING
Register issued on : 2010-08-02
Page 26
Page 27 Subsector I06: PRESSURE VESSELS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
I06 Registration Date : 2010-07-16 UNI Italy 0203B449/0001 Project Established 23.020.30 E0203B449 Pressure equipment - Putting into service and use of pressure equipment and assemblies - Part 9: Fitness for Service (FFS) The standard specifies how to apply Fitness For Service Assessment techniques to pressure equipment. New
** End of Subsector ** Subsector I09: SMALL TOOLS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
I09 DIN Germany 12101683/0001
Registration Date :
2010-07-13
Project Established
12101683 Hexagon socket screw keys with pilot New
** End of Subsector ** Subsector I18: MINING Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
I18 DIN Germany 00802203/0001
Registration Date :
2010-07-13
Project Established
00802203 Preparation of hard coal - Part 1: Survey New
** End of Subsector ** Subsector I20: REFRIGERATION Subsector : Organization : Country : Project ID : ICS : National Ref :
I20 DIN Germany 04400174/0001 04400174
Registration Date :
2010-07-13
Project Established
Page 28 Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Testing of cooling equipment for insulated means of transportation - Part 3: Transport refrigerating systems with dry ice New
I20 DIN Germany 04400175/0001
Registration Date :
2010-07-13
Project Established
04400175 Insulated means of transportation - Requirements and testing - Part 1: General New
I20 DIN Germany 04400176/0001
Registration Date :
2010-07-13
Project Established
04400176 Insulated means of transportation - Requirements and testing - Part 2: Mobile Container New
I20 DIN Germany 04400177/0001
Registration Date :
2010-07-13
Project Established
04400177 Testing of cooling equipment for insulated means of transportation - Part 4: Controlled gas refrigerating systems with direct evaporation New
** End of Subsector ** Subsector I30: AIR DISTRIBUTION Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
I30 UNMZ Czech Republic 12001010/0001
Registration Date : 2010-07-23 Draft Issue Date : 2010-10-30 Latest Date for Comments : 2011-01-01 Project Established
Ventilation for buildings - Determining performance criteria for residential ventilation systems Development of national annex to CSN EN 15665 including the analysis of requirements on
Page 29 Scope :
ventilation in residence buildings
Relatedness : National :
REV/AMD
CSN EN 15665 (2009)
** End of Subsector ** Subsector I99: UNDETERMINED Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
I99 Registration Date : 2010-07-29 LVS Draft Issue Date : 2010-07-29 Latvia Latest Date for Comments : 2010-08-30 28100703/0001 Draft for public enquiry 03.100.30 LVS 343 Qualification and certification of experts for assessment of hazardous equipment – General principles The standard regulates competence assessment and certification system for personnel who will conduct inspection for hazardous equipment. REV/AMD
LVS 343
** End of Subsector ** ** End of Sector **
Information procedure
Monthly Notifications Register
Notifications registered at CCMC from 2010-07-01 to 2010-07-31 Sector M : METALLIC MATERIALS
Register issued on : 2010-08-02
Page 30
Page 31 Subsector M01: STEEL Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
M01 BSI United Kingdom 01001727/0001
Registration Date :
2010-07-01
Project Established
BS 2853 Specification. The design and testing of steel overhead runway beams New
** End of Subsector ** Subsector M04: COPPER Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
M04 Registration Date : 2010-07-22 UNI Italy 93043930/0001 Project Established 77.120.20 U93043930 Magnesium and magnesium alloys - Extruded bars, tubes and profiles - Tolerances on dimensions and form This standard specifies the tolerances on dimensions and form for magnesium and magnesium alloys extruded bars and profiles. Maximum diameter of circumscribing circle CD is 800 mm (see figure 1). In case of profiles difficult to realize because of complexity of the project, the tolerances shall be agreed between purchaser and supplier. New
** End of Subsector ** Subsector M08: LIGHT ALLOYS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
M08 AENOR Spain P0035936/0001
Registration Date :
2010-07-29
Project Established
PNE-EN 573-3:2009/1M Aluminium and aluminium alloys - Chemical composition and form of wrought products Part 3: Chemical composition and form of products This amendment includes a national annex (informative) with the correspondence of EN and former UNE designations for aluminium alloys REV/AMD
UNE-EN 573-3:2009
** End of Subsector ** Subsector M18: METAL WIRE PRODUCTS Subsector :
M18 (Secondary
Registration Date :
2010-07-01
Page 32 Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector) BSI United Kingdom 01001802/0001
Registration Date :
Project Established
BS 1722-2:2006 Corrigendum 1 Fences. Part 2. Specification for strained wire and wire mesh netting fences. Corrigendum New
** End of Subsector ** Subsector M21: PRECIOUS METALS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
M21 Registration Date : 2010-07-23 BDS Bulgaria Latest Date for Comments : 2010-09-30 BG020001/0001 Draft for public enquiry 39.060 prBDS 5782 Gold. Technical delivery conditions This standard specifies the technical delivery conditions of gold intended for the production of gold based alloys, chemicals and other purposes, delivered in the form of cast ingots and strips REV/AMD
BDS 5782:1987
M21 Registration Date : 2010-07-23 BDS Bulgaria Latest Date for Comments : 2010-09-30 BG020002/0001 Draft for public enquiry 39.060 prBDS 5876 Silver. Technical delivery conditions This standard specifies the technical delivery conditions of silver intended for the production of silver based alloys, chemicals, silver powders and other purposes, delivered in the form of cast ingots REV/AMD
BDS 5876:1987
** End of Subsector ** ** End of Sector **
Information procedure
Monthly Notifications Register
Notifications registered at CCMC from 2010-07-01 to 2010-07-31 Sector N : NON-METALLIC MATERIALS
Register issued on : 2010-08-02
Page 33
Page 34 Subsector N01: PAPER AND BOARD Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
N01 DIN Germany 07400178/0001
Registration Date :
2010-07-13
Project Established
07400178 Paperboard - Terms and grades New
** End of Subsector ** Subsector N03: PETROLEUM PRODUCTS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title :
N03 BSI United Kingdom 01001642/0001
Registration Date :
2010-07-01
Project Established
BS 2000-306 Methods of test for petroleum and its products. Part 306. Determination of oxidation stability of straight mineral oil New
N03 BSI United Kingdom 01001644/0001
Registration Date :
2010-07-01
Project Established
BS 2000-455 Methods of test for petroleum and its products. Part 455. Determination of manganese in gasoline. Atomic absorption spectrometry (AAS) method New
N03 BSI United Kingdom 01001645/0001
Registration Date :
2010-07-01
Project Established
BS 2000-10 Methods of test for petroleum and its products. Part 10. Determination of kerosene burning characteristics. 24 hour method (Identical with IP 10)
Relatedness : National :
New
Subsector :
N03
Registration Date :
2010-07-01
Page 35 Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
BSI United Kingdom 01001646/0001
Project Established
BS 2000-12 Methods of test for petroleum and its products. Part 12. Determination of specific energy (Identical with IP 12 New
N03 BSI United Kingdom 01001647/0001
Registration Date :
2010-07-01
Project Established
BS 2000-19 Methods of test for petroleum and its products Part 19. Determination of demulsibility characteristics of lubricating oil (identical with IP 19) New
N03 BSI United Kingdom 01001648/0001
Registration Date :
2010-07-01
Project Established
BS 2000-48 Methods of test for petroleum and its products. Part 48. Determination of oxidation characteristics of lubricating oil (identical with IP 48) New
N03 BSI United Kingdom 01001661/0001
Registration Date :
2010-07-01
Project Established
BS 2000-0.1 Methods of test for petroleum and its products. Part 0.1. General introduction. Specifications. IP standard for thermometers (Identical with IP-Annex A) New
** End of Subsector ** Subsector N04: REFRACTORIES Subsector : Organization :
N04 UNI
Registration Date :
2010-07-22
Page 36 Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Italy 1312C960/0001 Project Established 83.100 E1312C960 Flexible cellular polymeric materials - Determination of resistance to static fatigue The standard describes a method for determining the resistance to static fatigue of a flexible cellular polymeric materials by determining the percentage change in thickness and the hardness index for penetration after the material compression at room temperature. REV/AMD
UNI 6355:1989
** End of Subsector ** Subsector N06: RUBBER Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
N06 AENOR Spain P0036074/0001
Registration Date :
2010-07-29
Project Established
PNE 53616 Elastomers. Specification and test methods for elastomer seals used in lighting This standard specifies the characteristics shall met the materials used for manufacture the elastomeric seals used in lighting REV/AMD
UNE 53616:1985 EX
N06 AENOR Spain P0036078/0001
Registration Date :
2010-07-29
Project Established
PNE 53539 Elastomers. No metallic pipes for connections to installations and devices using 1st, 2nd y 3rd family gases. Characteristics and test methods. This standard specifies dimensions, characteristics and test methods shall meet the no metallic flexible pipes for connections to installations and devices using 1ª, 2ª y 3ª family gases REV/AMD
UNE 53539:1990, UNE 53539:1991 ERRATUM, UNE 53539/1M:1996
** End of Subsector ** Subsector N12: TIMBER PRODUCTS Subsector : Organization : Country : Project ID : ICS : National Ref :
N12 (Secondary Subsector) BSI United Kingdom 01001803/0001 BS 1722-5:2006 Corrigendum 1
Registration Date :
2010-07-01
Project Established
Page 37 Title : Relatedness : National :
Fences. Part 5. Specification for close-boarded and wooden palisade fences. Corrigendum New
** End of Subsector ** Subsector N14: PLASTICS PIPES Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
N14 MSZT Hungary 34871201/0001 23.040.01
Registration Date : Draft Issue Date :
2010-07-19 2010-07-20
Project Established
Unplasticized poly(vinyl chloride) (PVC-U) plastics piping systems for waste dischange inside buildings to a maximum discharge temperature of 75 °C REV/AMD
MSZ 8000-4
N14 AENOR Spain P0036075/0001
Registration Date :
2010-07-29
Project Established
PNE 53367-1 Plastics piping systems for water supply for irrigation. Polyethylene (PE). Part 1: Specifications for pipes This part of the standard specifies characteristics and test methods for polyethylene (PE) pipes for irrigation REV/AMD
UNE 53367:2005
N14 AENOR Spain P0036076/0001
Registration Date :
2010-07-29
Project Established
PNE 53367-2 Plastics piping systems for water supply for irrigation. Polyethylene (PE). Part 2: Fittings and the system This part of the standard specifies characteristics and test methods for fittings for irrigation and the system REV/AMD
UNE 53367:2005
** End of Subsector ** ** End of Sector **
Information procedure
Monthly Notifications Register
Notifications registered at CCMC from 2010-07-01 to 2010-07-31 Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT
Register issued on : 2010-08-02
Page 38
Page 39 Subsector S01: ACOUSTICS AND SOUND INSULATION Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
S01 Registration Date : 2010-07-13 ASI Austria 00023349/0001 Project Established 03.080.30, 17.140.01, 91.120.20 ÖNORM S 5012 Acoustic principles for the construction of restaurants, similar establishments and related installations The present ÖNORM is for the planning of restaurants, comparable facilities of commercial and non-commercial kind. She contains bases for the computational calculation of sound appointments from guest of restaurants, comparable facilities as well as with it to linked arrangements to reach the necessary sound insulation to the avoidance from unreasonable neighbor's nuisances by a uniform action by the sound-technical planning as well as implementation and to prove. The calculation of the sound power level of music instruments and ensembles are desribed in ONR 305015. New
S01 Registration Date : 2010-07-13 ASI Austria 00023350/0001 Project Established 17.140.01, 97.200.20 ONR 305015 Calculation of the sound power level of music instruments and ensembles In this ONR the calculation of the sound power level is shown for music ensembles with different instruments. The acoustic irradiation occurs outside or in closed rooms without electric acoustic irradiation arrangement. New
** End of Subsector ** Subsector S09: WATER QUALITY AND WATER SUPPLY Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
S09 Registration Date : 2010-07-13 ASI Austria 00023337/0001 Project Established 13.060.20, 91.140.65 ÖNORM B 5019 Hygienic aspects of the planning, construction, operation, surveillance and rehabilitation of central heating installations for drinking water This ÖNORM describes measures for the avoidance of legionella growth and for the prevention of infections by heated drinking water. The points relevant for hygiene by planning, implementation, operation, supervision and reconstruction of central drinking water heating installations and distribution systems are described. The implementation in this ÖNORM is valid in particular for sick person's institutions and health resort institutions, nursing facilities, bath facilities, accommodation operations, communal facilities, public buildings and dwelling house equipments.
Page 40 Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
New
S09 Registration Date : 2010-07-13 ASI Austria 00023338/0001 Project Established 13.060.25, 91.140.30 ÖNORM B 5020 Hygienic aspects of the planning, construction, operation, maintenance, surveillance and rehabilitation of evaporative cooling installations This ÖNORM describes demands for the water quality for the avoidance of legionella growth in evaporative cooling installations. The points relevant for hygiene by planning, implementation, operation, supervision and reconstruction of open wet cooling towers and vaporisation cooler with closed circulations are described. New
S09 UNMZ Czech Republic 75003810/0001
Registration Date : 2010-07-14 Draft Issue Date : 2010-08-30 Latest Date for Comments : 2010-09-30 Draft for public enquiry
Water quality - Determination of humic substances The Standard specifies the method for the determination of humic substances in the range 0,5 mg/l to 15 mg/l. The method is used for the analysis of surface water from peat basins which is used for treatment for human consumption. New
S09 UNMZ Czech Republic 75003910/0001
Registration Date : 2010-07-14 Draft Issue Date : 2010-08-30 Latest Date for Comments : 2009-09-30 Draft for public enquiry
Water quality - Determination of oxidation-reduction potential The Standard specifies the method for the determination of oxidation-reduction potential in drinking water, surface water, ground water and waste water. The method measures the oxidation-reduction potential in the range ± 1 500 mV.
Relatedness : National :
New
Subsector : Organization : Country :
S09 UNMZ Czech Republic
Registration Date : Draft Issue Date : Latest Date for Comments :
2010-07-14 2010-08-30 2010-09-30
Page 41 Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
75004010/0001
Draft for public enquiry
Water quality - Pretreatment of waste water samples before chemical analysis The Standard specifies pretreatment of waste water samples before chemical analysis with the target to facilitate obtaining of comparable analytical results even for samples containing suspended solids. New
S09 UNMZ Czech Republic 75004909/0001
Registration Date : 2010-07-14 Draft Issue Date : 2010-08-30 Latest Date for Comments : 2010-10-30 Draft for public enquiry
Water quality - Determination of dissolved reactive silisium using ammonium molybdate The Standard specifies the method for the determination of dissolved reactive silicon using ammonium molybdate(VI) in surface water, ground water and service water in the range 0,25 mg/l to 15 mg/l. New
** End of Subsector ** Subsector S13: ERGONOMICS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
S13 Registration Date : 2010-07-16 UNI Italy 48000900/0001 Project Established 13.180 U48000900 The contribution of technical standards ergonomic analysis and assessment of psychosocial risk factors and work-related stress This Technical Report proposes to take account of psychosocial factors and the mental work-load, with particular reference to work-related stress risk. New
** End of Subsector ** Subsector S20: WASTE COLLECTION, HANDLING AND TRANSPORTATION Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
S20 Registration Date : 2010-07-22 UNI Italy 53002120/0001 Project Established 13.030.40 U53002120 Maintenance - Maintenance ratios for the waste management The standard is intended to provide indicators of waste management services to assess the
Page 42 Scope :
Relatedness : National :
activities made by the maintenance services and the relevant costs incurred to define the indices useful to compare the internal services company and between companies of the same sector. New
** End of Subsector ** Subsector S26: ENVIRONMENTAL MANAGEMENT Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
S26 Registration Date : 2010-07-22 UNI Italy 53002130/0001 Project Established 13.020.10 U53002130 Environmental management systems - Application of UNI EN ISO 14001 in Public Administration This technical report aims to provide information on the application in Italy of environmental management systems in accordance with UNI EN ISO 14001:2004 applied to public administration with specific powers provided by legislation incorporating and/or statutes, territorial government. New
** End of Subsector ** Subsector S27: WASTE - CHARACTERIZATION, TREATMENT AND STREAMS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
S27 Registration Date : 2010-07-13 ASI Austria 00023348/0001 Project Established 13.030.10 ÖNORM S 2097-4 Sorting analysis of waste - Part 4: Evaluation of measuring results and analysis report The ÖNORM S 2097-1 to -4 "sorting analysis of waste" is concerned with the identification and investigation of the composition of solid waste, including used materials/reusable materials using physical methods. This part four applies for the evaluation of the analytical results of manually sortable waste (lump size, piece size). New
S27 Registration Date : 2010-07-15 ASI Austria 00023354/0001 Project Established 13.080.05 ÖNORM S 2126 Basic characterization of dredged material prior to excavation or removal of activities This ÖNORM applies to basic characterization of dredged material prior to excavation or removal of activities, which is obtained after the excavation or removal of as waste and
Page 43 Scope :
recycling or disposal is to be fed.
Relatedness : National :
New
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
S27 Registration Date : 2010-07-16 UNI Italy 53002100/0001 Project Established 13.030.01 U53002100 Wastes - Manual sampling and preparation of sample and analysis of eluates The standard describes: - The process of defining a sampling plan - Manual sampling of liquid, granular, past-like, coarse, monolithic and sludge in relation to their different physical and short-term storage; - Procedures for reducing the size of the samples of the waste collected in the field, to facilitate transport in the laboratory; - Documentation for the traceability of sampling operations; - Procedures for packaging, preservation, sample short-term storage and transport of samples of waste; - Procedures for reducing the size of samples for laboratory analysis; - Procedures for preparation and analysis of eluates. It applies to all types of waste such as liquid waste, liquefied by heating, liquid sludge, pastlike sludge, powders or granular waste, coarse waste and monolithic waste. REV/AMD
UNI 10802:2004
** End of Subsector ** Subsector S99: UNDETERMINED Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
S99 Registration Date : 2010-07-22 MSA Malta 00003500/0001 Project Established 97.200.40, 97.200.40 MSA 3500 Public Playground – Requirements for Public Playground Safety and Their Management This National Standard specifies the minimum requirements for a public outdoor playground facility to: a) consistently provide a safe environment that meets user and applicable regulatory requirements, and b) aim to enhance user satisfaction. It aims to provide also general guidelines for the design and proper management of a playground. REV/AMD
MSA 3500:2010
S99 (Secondary Registration Date : 2010-07-22 Subsector) MSA Malta 00003500/0001 Project Established 97.200.40, 97.200.40 MSA 3500 Public Playground – Requirements for Public Playground Safety and Their Management This National Standard specifies the minimum requirements for a public outdoor
Page 44 Scope :
Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
playground facility to: a) consistently provide a safe environment that meets user and applicable regulatory requirements, and b) aim to enhance user satisfaction. It aims to provide also general guidelines for the design and proper management of a playground. REV/AMD
MSA 3500:2010
S99 MSZT Hungary 34871903/0001 13.280
Registration Date : Draft Issue Date :
2010-07-22 2010-07-08
Project Established
Protection against ionizing radiation. Radiation protection at the application of unsealed radioactive products REV/AMD
MSZ 62-7
S99 Registration Date : 2010-07-16 UNI Italy 53002090/0001 Project Established 13.020 U53002090 Environmental impact sudies - Terminology This standard specifies the definition of the terms adopted in most environmental impact studies. REV/AMD
UNI 10745:1999
S99 Registration Date : 2010-07-16 UNI Italy 53002110/0001 Project Established 13.030 U53002110 Guidelines for end of life vehicles treatment and environmental problems consequences The rule defines operational procedures for the treatment of end of life vehicles by operators of authorised facilities. The rule identifies, from the acceptance procedures of the vehicle in the settlement, the procedures for safeguarding and dismantling, storage of materials and parts and environmental issues related to the activity.
Relatedness : National :
New
Subsector : Organization : Country : Project ID :
S99 UNI Italy 62000010/0001
Registration Date :
2010-07-22
Project Established
Page 45 ICS : National Ref : Title : Scope :
Relatedness : National :
03.100.01 U62000010 Guidelines for Equal Opportunities The technical report provides guidance to organizations in order to administer the issue of equal opportunities, considered of particular importance in the field of social responsibility. The document will help to grow the corporate culture on equal opportunities, in line with what is defined in the Charter for Equal Opportunities and the particulars of the European Commission "Equality between men and women -2009". New
** End of Subsector ** ** End of Sector **
Information procedure
Monthly Notifications Register
Notifications registered at CCMC from 2010-07-01 to 2010-07-31 Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING
Register issued on : 2010-08-02
Page 46
Page 47 Subsector T03: ROAD VEHICLES Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
T03 DIN Germany 05202452/0001
Registration Date :
2010-07-13
Project Established
05202452 Retro-reflective registration plates for motor vehicles and trailers New
T03 AENOR Spain P0035994/0001
Registration Date :
2010-07-29
Project Established
PNE 26524 Test procedure for vehicle evaluation in wet proving ground with medium adherence. This standard specifies one open-loop test method for passenger car evaluation in wet proving ground with medium adherence. It includes straight aquaplaning, cornering aquaplaning, and steady state corning behaviour and lap time in a circuit. New
** End of Subsector ** Subsector T08: CRANES Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
T08 (Secondary Subsector) BSI United Kingdom 01001727/0001
Registration Date :
2010-07-01
Project Established
BS 2853 Specification. The design and testing of steel overhead runway beams New
T08 Registration Date : 2010-07-29 LVS Draft Issue Date : 2010-07-29 Latvia Latest Date for Comments : 2010-08-30 28100701/0001 Draft for public enquiry 53.020.20 LVS 267 Technical examination of cranes The purpose of this standard is to establish unified procedure to inspect cargo cranes. The standard defines minimal inspection amount and requirements for cargo cranes technical condition to ensure safe use.
Page 48 Relatedness : National :
REV/AMD
LVS 267
** End of Subsector ** Subsector T16: LIFTS & ESCALATORS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Relatedness : National :
T16 BSI United Kingdom 01001601/0001
Registration Date :
2010-07-01
Project Established
BS 5655-6 Lifts and service lifts. Part 6. Code of practice for the selection and installation of new lifts New
** End of Subsector ** Subsector T17: BUILDERS HOISTS Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
Relatedness : National :
T17 Registration Date : 2010-07-29 LVS Draft Issue Date : 2010-07-29 Latvia Latest Date for Comments : 2010-08-30 28100702/0001 Draft for public enquiry 53.020.20 LVS 268 Technical examination of hoists for lifting of people The purpose of this standard is to establish unified procedure to inspect hoists for lifting of people. The standard defines minimal inspection amount and requirements for hoists technical condition to ensure safe use REV/AMD
LVS 268
** End of Subsector ** Subsector T19: ROAD SAFETY Subsector : Organization : Country : Project ID : ICS : National Ref : Title : Scope :
T19 AENOR Spain P0036114/0001
Registration Date :
2010-07-29
Project Established
PNE 199152-1 Road equipment. Data quality. Data analysis. Part 1: Traffic data This standard constitutes a system for the exchange of information between Traffic Control Centres of an area or region (Zonal Traffic Control Centre) and other systems or Institutions. The goal is to have a standard platform delivering the real-time publication of traffic, meteorological and signalling parameters, enabling several systems to exchange information and consult historical and statistical information. Hereinafter the information exchange system which is the subject of this standard will be
Page 49 Scope :
Relatedness : National :
referred to as Sistema INTERCENTROS. The procedure for exchange is based on the use of centralised databases where the management systems will upload both real-time information (equipment states and alarms and the parameters provided by them, detailed road traffic information, etc.) and historical information (only data). As one example of use, based on the information exchange method described by this standard, the information updated in real time by the Zonal Traffic Control Centres could be displayed on the operation interfaces of the Traffic Management System at the Centre of Centres. New
** End of Subsector ** Subsector T99: UNDETERMINED Subsector : Organization : Country : Project ID : ICS : National Ref : Title :
T99 Registration Date : 2010-07-13 DIN Germany 13202176/0001 Project Established 21.140 DIN 83106 Profile Gaskets for heavy hinged doors on ships and for hatches
Relatedness : National :
New
** End of Subsector ** ** End of Sector **
2010-05
List of non-electrotechnical subsectors Sector A: Services Subsector
Title
ISO/TC reference
CEN/TC reference
A01
Tourist services
/
329; CEN/WS ETO
A02
Cleaning services
/
328
A03
Postal services
/
331
A04
Transportation services
/
320; CEN/WS 016
A05
Maintenance services
/
319
A06
Building and construction services
/
330
A07
Translation services
/
A08
Funeral services
/
CEN/BT/TF 139
A09
Facility management
/
348
A10
Services of Real Estate Agents
/
CEN/BT/TF 180, 373
A11
Security Services
/
CEN/BT/TF 167; 391; 384; 370; CEN/WS 044
A12
Consultancy Services
/
395; 381
A99
Undetermined
/
CEN/WS 002 CEN/WS 004 CEN/WS 037 CEN/WS 039 CEN/WS 041 CEN/WS 051 375; 374; 376; 385
Sector B: Building and construction Subsector
Title
ISO/TC reference
CEN/TC reference
B01
Fire protection
21
70; 72; 191; 192
B02
Structures
59; 98
166; 167; 250; 277; 346; 349 284; 288; 297; 340;
B03
Concrete
71
104; CEN/WS 009
B04
Cement
74; 77
51
B05
Fire tests
92
127
B06
Gypsum
/
241
B07
Glass
160
129
B08
Doors and windows
162
33
B09
Thermal matters
163
88; 89; 371 CEN/BT WG 173 CEN/WS 036
B10
Timber structures
165
124
B11
Metal structures
167
135
B12
Masonry
179; 196
125; 246
B13
Solar energy
180
312
B14
Geotechnics
182
341; 396
B15
Sanitary appliances
/
163; 7
B16
Taps
/
/
B17
Lighting equipment and lighting application technology
/
50; 169
B18
Scaffolding
/
53
B19
Ceramic tiles
189
67
B20
Drainage equipment
/
165
B21
Baths
/
/
B22
Wallcoverings
/
99
B23
District heating
/
107
B24
Auxiliary and handicraft work
/
/
B25
Gas distribution installation and related equipment
/
234; 235; 282
B26
Road building and maintenance
/
178; 227
B27
Waterproofing materials
/
128; 254; 361; 314
B28
Floor coverings
38/SC 12
134
B29
Aggregates
/
154
B30
Floor and surfacing
/
217; 303; 323; 390
B31
Heating systems in buildings
/
228; 247
B32 B33
Precast concrete products Building design
/ 205
177; 229 315; 325; 388
B34
Building and construction – Environmental aspect
350; 351
B99
Undetermined
/
/
Sector C: Chemicals, chemical engineering and food products Subsector
Title
ISO/TC reference
CEN/TC reference
C01
Food products
34
174; 275; 302; 360 307; 327; 338; 387 CEN/WS 008 CEN/WS 018
C02
Paints and related products
35
139; 298; 173
C03
Chemistry
47
317; 363
C04
Laboratory glassware
48
332
C05
Lac
/
/
C06
Essential oils
54
/
C08
Pesticides
81
/
C09
Surfactants
91
276
C10
Starch
93
/
C11
Tobacco
126
401
C12
Glass plant
/
/
C13
Fertilizers
134
223; 260
C16
Wood preservatives
/
/
C17
Trees and plants
/
/
C18
Adhesives
/
193
C19
Chemical analysis
201; 202
382; 347
C20
Explosives and firework
/
212; 321
C21
Cosmetics
217
392
C99
Undetermined
/
386
Sector F: Fundamental standards Subsector
Title
ISO/TC reference
CEN/TC reference
F01
Technical drawings
10
/
F02
Units & symbols
12
/
F03
Preferred numbers
19
/
F04
Sieves
24
/
F05
Measuring instruments
30; 113
92; 171; 176; 237; 294; 318; 244; 367 141; CEN/WS 011
F06
Terminology principles
37
/
F07
Documentation and information
46
304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368
F08
Surfaces
/
290
F09
Banking
68
/
F10
Statistics
69
/
F12
Information processing systems
204
224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365
F13
Environmental tests
/
/
F14
Graphical technology, sign-boards and nameplates
130
/
F15
Material testing in general
135
138; CEN/WS 007 CEN/WS 021 CEN/WS 033
F16
Graphical symbols
145
/
F17
Administrative documents
154
CEN/WS MMU
F18
Micrographics
171
/
F19
Optics
172; 187
123; 170
F20
Quality assurance
176
CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362
F21
Value analysis and project network
/
279
F22
Logistics
/
379; 273
F23
Energy
203
CEN/CLC/JWG 3 CEN/CLC/JWG 4 CEN/WS 027
F99
Undetermined
/
389
Sector H: Products for household and leisure use Subsector
Title
ISO/TC reference
CEN/TC reference
H01
Cinematography
36
372
H02
Photography
42
/
H03
Consumer questions
/
291
H04
Sports equipment
83
136
H05
Oil and gas burners
/
47; 131
H06
Horology
114
/
H07
Space heating
116
62; 110; 130; 179; 180
H08
Sizing systems
133; 137
/
H09
Furniture
136
207
H10
Sewing machines
148
/
H11
Heater controls
161
58
H12
Ceramic and glass-ware for food
166
/
H13
Jewellery
174
CEN/WS 047
H14
Caravans
177
245
H15
Toys
181
52
H17
Oil stoves
/
46
H18
Central heating boilers
/
48; 57; 109; 269
H19
Non-electric cookers and barbecues
/
49; 281; 295
H22
Smokers’ lighters and matches
/
355; 87
H23
Ladders
/
93
H24
Tactile danger warnings
/
/
H25
Large gas appliances
/
106; CEN/CLC/JWG FCGA
H26
Sealing materials
/
108; 208
H27
Educational equipment
/
/
H28
Hunting
191
/
H29
Heat pumps
/
113
H30
Equipment for children
/
252
H31
Dedicated LPG appliances
/
181
H32
Culinary utensils
186
194
H33
Footwear (excluding protective footwear)
/
309
H34
Child safety
/
CEN/BT/WG 117 398
H99
Undetermined
/
299; 364; 369; 402
Sector I: Mechanical engineering Subsector
Title
ISO/TC reference
CEN/TC reference
I01
Screw threads
1
/
I02
Fasteners
2
185
I03
Limits & fits
/
/
I04
Rolling bearings
4
/
I05
Iron pipes
5
203
I06
Pressure vessels
11
54
I07
Shafts
14
/
I08
Agricultural machines
23
144, 334
I09
Small tools
29
213
I10
Splines
/
/
I11
Machine tools
39
142; 143; 145; 255
I12
Pulleys & belts
41
188
I13
Gas containers
58
23; 286
I14
Gears
60
/
I15
Equipment for petroleum industry
67
12
I16
Internal combustion engines
70; 192
270
I17
Machinery in general (including safety)
72; 199
114; 153; 214; 313 271, 337; 399; 397 CEN/WS 025
I18
Mining
82
196
I19
Nuclear energy
85
/
I20
Refrigeration
86
44; 182
I21
Chains and chain wheels
100
/
I22
Vacuum technology
112
/
I23
Pumps
115
197
I24
Industrial fans
117
356
I25
Compressors
118
232
I26
Plain bearings
123
/
I27
Earth moving and construction equipment
127; 195
151
I28
Fluid power
131
/
I29
Gas cleaning
/
195
I30
Air distribution
/
156
I31
Valves
153; 185
69; 236; 105
I32
Flanges
/
74
I33
Information processing in automation
184
310
I34
Non-ferrous metallic pipes
/
/
I35
Leisure and recreational machines
/
152
I36
Thermoprocessing technology
/
186
I37
Printing and paper machines
/
198
I38
Leather production, tannery and related machinery
/
200; 201
I39
Machines for metal processing
/
202; 322
I40
Industrial piping networks
/
267
I41
Membrane filters
/
272
I42
Potentially explosive atmospheres
/
305
I43
Hydrogen energy
197
/
I44
Nanotechnologies
229
352
I99
Undetermined
/
CEN/CLC/JTF PE; CEN/CLC/TC 2 65, 157
Sector M: Metallic materials Subsector
Title
ISO/TC reference
CEN/TC reference
M01
Steel
17
CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110
M02
Zinc
/
209
M03
Foundry technology,
25
190; ECISS/TC 31 ECISS/TC 111
including cast iron M04
Copper
26
133
M05
Welding
44
121
M06
Dimensions of wrought products
/
/
M07
Manganese and chromium
65
/
M08
Light alloys
79
132
M09
Iron ores
102
/
M10
Metallic coatings
107
240
M11
Powder metallurgy
119
/
M12
Aluminium ores
129
/
M13
Ferroalloys
132
/
M14
Nickel
155
/
M15
Metallic corrosion
156
262; 219
M16
Mechanical tests for metals
164
ECISS/TC 1 ECISS/TC 2 ECISS/TC 101
M17
Heavy metal ores
183
/
M18
Metal wire products
/
ECISS/TC 30 CEN/BT/TF 196 378
M20
Tin and tin alloys
/
220
M21
Precious metals
/
283
M22
Lead and lead alloys
/
306
M99
Undetermined
/
/
Sector N: Non-metallic materials Subsector
Title
ISO/TC reference
CEN/TC reference
N01
Paper and board
6
172
N02
Solid fuels
27
335; 343;383 CEN/WS 019
N03
Petroleum products
28
19; 336 CEN/WS 038
N04
Refractories
33
187
N05
Textiles
38
189; 248
N06
Rubber
45
218; 366 CEN/WS 003
N07
Sawn timber
55
38; 175
N08
Mica
/
/
N09
Plastics
61
249
N10
Cork
87
/
N11
Wood-based panels
89
112
N12
Timber products
99
/
N13
Leather
120
289
N14
Plastics pipes
138
155
N17
Fluorspar
175
/
N18
Glass-fibre reinforced plastics
/
/
N19
Tapes
/
253
N20
Ceramics
206
184
N21
Gaseous fuels and combustible gas
158; 193
238
N22
Feather and related materials
/
222
N99
Undetermined
/
/
Sector S: Health, environment and medical equipment Subsector
Title
ISO/TC reference
CEN/TC reference
S01
Acoustics and sound insulation
43
126; 211
S02
Transfusion equipment
76
/
S03
Syringes
84
/
S04
Protective clothing and equipment
94
85; 158; 159; 160; 161; 162 CEN/WS 026
S05
Dentistry
106
55
S06
Vibration & shock
108
231
S07
Anaesthetic and respiratory equipment
121
215
S08
Air quality
146
137; 243; 264; CEN/CLC WG/CMI
S09
Water quality and water supply
147
164; 230; CEN/WS 001 CEN/WS 034
S10
Surgical implants
150
285; CEN/CLC JWG/AIMD
S11
Contraceptives
157
/
S12
Gas analysis
/
/
S13
Ergonomics
159
122
S14
Prosthetics
168
/
S15
Surgical instruments
170
/
S16
Aids for the disabled
173
293
S17
Respiratory protective devices
/
79
S18
Sterilization of equipment
198
102; 204
S19
First aid equipment and rescue systems
/
239
S20
Waste collection, handling and transportation
/
183
S21
Laboratory medicine, clinical pathology and biosafety
194
140; 206; 233; 257; 258; 316 CEN/CLC/TC 3 CEN/WS 031 CEN/WS 053
S22
Energy saving
/
CEN/WS 005 CEN/WS 015
S23
Personal & property protection against aggression/Burglary protection
/
263
Soil quality
190
345; CEN/WS 032
S24
S25
Chemical disinfectants and antiseptics
/
216
S26
Environmental management
207
CEN/WS 040
S27
Waste - Characterization, treatment and streams
/
292; 308; CEN/BT/TF 120
S28
Demining
/
CEN/WS 029 CEN/WS 013
S99
Undetermined
/
205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; 403 CEN/WS PCEC CEN/WS 012 CEN/WS 020
Sector T: Transport, mechanical handling and packaging Subsector
Title
ISO/TC reference
CEN/TC reference
T01
Shipbuilding and maritime structures
8; 188
15; 300
T02
Aerospace
20
274; AECMA; ECSS 377
T03
Road vehicles
22
301; 326 CEN/WS IMA
T04
Tyres
31
/
T05
Pallets
51
/
T06
Metal and plastic containers
52
210; 221; 265; 266; 268; 296 393
T07
Glass containers
63
/
T08
Cranes
96
147
T09
Materials handling and storage equipment
101
148; 149
T10
Freight containers
104
119; 280
T11
Steel wire ropes
105
/
T12
Industrial trucks
110
150; 324
T13
Lifting chains, hooks and ropes
111
168
T14
Packaging
122
261; 120
T15
Cycles
149
333
T16
Lifts & escalators
178
10; 242
T17
Builders hoists
/
/
T18
Elevating platforms
/
98
T19
Road safety
/
226; 339
T20
Tram- and railway engineering
/ /
256; CEN/CLC WG/FPR
T21
Packaging machines
/
146
T22
Off-road vehicles
/
354
T99
Undetermined
/
CEN/WS TAF
Sector Z: Information technology Subsector
Title
ISO/TC
CEN/TC
Z01
Radiocommunication for IT
/
/
Z02
Telephony, telegraphy for IT
/
CEN/CLC - ETSI
Z03
Common O.S.I. activities
/
CEN/CLC - EWOS
Z99
Undetermined
/
353; CEN/WS DFA CEN/WS DIR CEN/WS EBES CEN/WS ECH CEN/WS ECO CEN/ES EFI CEN/WS ESI CEN/WS FAS CEN/WS FUN CEN/WS IEC CEN/WS JXF CEN/WS LCT CEN/WS LTS CEN/WS MDC CEN/WS MET CEN/WS POR CEN/WS URI CEN/WS XFS CEN/WS ORC CEN/WS CTC CEN/WS XML CEN/WS MEE CEN/WS SCE CEN/WS MES CEN/WS UDP CEN/WS MMI CEN/WS FS2 CEN/WS AUT CEN/WS ICT CEN/WS KMA CEN/WS TEX CEN/WS SAN CEN/WS DPP CEN/WS HIC CEN/WS MLX CEN/WS eGO CEN/WS BII CEN/WS ADN CEN/WS CAT CEN/WS CST CEN/WS DIS CEN/WS ESR CEN/WS EUR CEN/WS FIN CEN/WS GEN CEN/WS ISD CEN/WS NEA CEN/WS NOM
CEN/WS QIS CEN/WS TWE CEN/WS WAC CEN/WS eIN CEN/WS ePR