Monogram 36" Induction Cooktop

Monogram® 36" Induction Cooktop ZHU36RSJSS OVERALL DIMENSIONS 1 1/16" 36" (91.4) (2.7) Cutout overlap 5/8" (1.6) Cutout overlap 33 7/8" (86.0)...
Author: Daniella Dennis
1 downloads 2 Views 430KB Size
Monogram® 36" Induction Cooktop

ZHU36RSJSS

OVERALL DIMENSIONS

1 1/16"

36" (91.4)

(2.7) Cutout overlap

5/8"

(1.6) Cutout overlap

33 7/8" (86.0) Cutout width

SPECIFICATIONS

19 1/8"

20 3/8"

Overall Width

36" (91.4 cm)

Overall Depth

20 3/8" (51.8 cm)

Overall Height

4 5/8" (11.8 cm)

Cut-out Width

33 7/8" (86.0 cm)

Cut-out Depth

19 1/8" (48.6 cm)

Conduit Length

48" (122 cm)

Electrical Rating

11,600W at 240V/60Hz 10,100W at 208V/60Hz

Recommended Circuit Breaker Size

50 Amps

Net Weight

48 lbs. (21.8 kg)

Approx. Shipping Weight

58 lbs. (27.6 kg)

(48.6) Cutout depth

(51.8)

TOP VIEW (SHOWING CUTOUT OVERLAP)

3/16"

OPTIONAL ACCESSORIES Precision Cooking Kit

JXSOUSV1

Flush-Mount Kit

JXFLUSH1

(0.5)

3 1/16"

4 7/16"

(7.8)

(11.3)

Baffle

33 3/4" (85.7) 1 1/8"

ATTENTION ELECTRICIAN:

FRONT VIEW

(2.9)

This cooktop is provided with a 48" flexible conduit and must be hard wired (direct wired) into an approved junction box and be properly grounded. It is not permitted to use a “plug and receptacle” type installation on this cooktop.

Front of Cooktop

Use a two-wire, three conductor 208/240 VAC, 60 Hertz electrical system. A white (neutral) wire is not needed for this cooktop

3/4" (1.9)

18 15/16" (48.1)

SIDE VIEW

For more details refer to the installation instructions for this product.

Dimensions in parentheses are in centimeters unless otherwise noted. Actual product dimensions may vary due to manufacturing tolerances.

ZHU36RSJSS

Product Specification Revised 4/15

Monogram® 36" Induction Cooktop

ZHU36RSJSS

INSTALLATION

NOTES A W  all coverings, countertop NOTES and cabinets surrounding cooktop must be able to withstand temperatures of up to 200ºF.

13"

(33.0) max

G

B E

C

A

15"

(38.1) min

D

H

8"

5"

(20.3) min (12.7) min

16" (40.6) min

To electrical junction box

DRAWER

2"

(5.1) min Air gap

Locate electrical junction box at least 16" below the countertop

F

36 " (91.4) Cabinet base

FRONT VIEW

SIDE VIEW

COUNTERTOP CUT-OUT DIMENSIONS 33 7/8" (86.0) min 34" (86.3) max Cutout width

ADA INSTALLATION 1 3/4" (4.5) min Clearance between the rear edge of the cutout and the nearest wall behind the cooktop

I

(12.7) min

Cutout depth

FRONT 2 1/2" (6.4) min Clearance between the front edge of the cutout and the front edge of the countertop

ZHU36RSJSS Dimensions in parentheses are in centimeters unless otherwise noted.

C W  hen using a ventilation hood or microwave oven above the cooktop, see hood or microwave installation instructions for minimum overhead clearance dimensions. D M  inimum 15” of clearance from countertop to nearest overhead surface on both sides of cooktop. Make sure to include any lighting rail covers in calculation. E M  inimum 2” distance from edge of cutout to nearest adjacent side wall below upper cabinets. F I nstall an approved junction box where it can be easily reached through the front of the cabinet where the cooktop is located. IMPORTANT: For serviceability, the junction box must be located where it will allow considerable slack in the 48” long conduit. G M  aximum 13” depth of unprotected overhead surfaces, when no ventilation hood or microwave oven is installed. H W  hen installing the cooktop above a cabinet drawer, a solid barrier must be installed at least 5” from the bottom of the cooktop. Use any solid material such as 1/4” thick plywood. Allow at least 1/4” air gap between the barrier and the top of the cabinet drawer.

5"

19 1/8" (48.6) min 19 1/4" (48.9) max

TOP VIEW OF CUTOUT

B M  inimum 30” clearance from countertop to unprotected overhead surfaces, when no ventilation hood or microwave oven is installed.

SIDE VIEW

I F or Americans with Disabilities Act (ADA) forward approach installation: Minimum 5” clearance between the top of the countertop and the enclosure. The enclosure must be made of at least 1/4” thick wood material, and must have an access panel installed in order to provide access to the junction box and hold-down brackets, and to allow for service of the cooktop. For more details refer to the installation instructions for this product.

Product Specification Revised 4/15

Monogram® 36" Induction Cooktop INSTALLATION ABOVE WALL OVEN D

ZHU36RSJSS

A

C

NOTES A Note this cooktop is only NOTES

ELECTRIC

approved for installation above specific wall ovens as labeled on this unit.

Wall oven

ELECTRIC Wall oven

ELEC.

cooktop

F G

C W  hen installing this cooktop above a single wall oven, do not install the baffle.

D

D W  hen this cooktop is installed above a flushmounted wall oven, the clearance from the front edge of the countertop to the front edge of the cooktop cutout is minimum 2-1/2” plus the wall oven cleat setback.

4 3/4"

(12.1) max

E

SIDE VIEW

INSTALLATION ABOVE WARMING DRAWER

FRONT VIEW

E M  aximum toe kick height of 4” when installed above a certified wall oven (43/4” including thickness of support platform).

B

F J unction box location for wall oven (may also be located in adjacent cabinet).

H

5"

(12.7) min

ELEC.

cooktop

G

SIDE VIEW

B W  arming drawers are approved for installation below only certain specified cooktop models. See the label attached to the top of the warming drawer or underside of the cooktop for approved combinations.

FRONT VIEW

For more details, refer to the installation instructions for this product on Monogram.com. Dimensions in parentheses are in centimeters unless otherwise noted.

ZHU36RSJSS

G E  lectrical connection for cooktop must be located in an accessible adjacent location to the right (may also be located in adjacent cabinet). H W  hen installing the cooktop above a warming drawer, a solid barrier must be installed at least 5” from the top of the countertop. Use any solid material such as 1/4” thick plywood. Allow at least a 2” air gap between the front of the barrier and the inside of the cabinet and at least 1/4” air gap between the barrier and the top of the warming drawer. For more details refer to the installation instructions for this product

Product Specification Revised 4/15

Monogram® 36" Induction Cooktop FLUSH-MOUNT INSTALLATION

ZHU36RSJSS

A

NOTES Front & Back Front = 3/4"&(1.9) Back = 3/4" (1.9) A NOTES  se optional JXFLUSH1 kit U Right & Left =Right 1 3/16" & Left (3.0) = 1 3/16" (3.0) to flush-mount the cooktop Width of rabbet Width of rabbet in countertop in countertop into the countertop. Read all installation instructions B supplied with cooktop andmax kit before beginning 1/4" (0.6) max 1/4" (0.6) Depth of rabbet Depth ofinstallation. rabbet

36 1/4" (92.1) 36 1/4" (92.1)

in countertop

20 5/8"

20 5/8"

(52.4)

X

X X

Countertop Countertop

(52.4)

X

FRONT VIEW FRONT VIEW TOP VIEW OF CUTOUT

R 5/8" (1.6)

All Four Corners

B T  o avoid hot cookware from contacting the countertop surface, the cooktop should be installed at least 1/32” higher than the countertop.

C U  se strips of wood or solid-surface countertop material to reinforce the countertop below the flushmount rabbet. For an island or peninsular installation secure strips to all four sides, otherwise just secure strips to the front and back under the cutout.

C

R 5/8" (1.6)

in countertop

All Four Corners

SECTION X–X Through countertop showing depth of rabbet for flush-mount

D N  ote this cooktop is only approved for installation above specific wall ovens as labeled on this unit. E W  hen installing this cooktop above a single wall oven, do not install the baffle.

FLUSH-MOUNT INSTALLATION ABOVE WALL OVEN

FLUSH-MOUNT INSTALLATION ABOVE WARMING DRAWER

D

F

ELEC.

E

Wall Oven

5 1/2"

ELEC.

Wall Oven

(14.0) min

I

5 1/2"

H

F W  hen this cooktop is installed above a flushmounted wall oven, the clearance from the front edge of the countertop to the front edge of the cooktop cutout is minimum 2-1/2” plus the wall oven cleat setback. G M  aximum toe kick height of 4” when installed above a certified wall oven (4-3/4” including thickness of support platform).

(14.0) min

H W  arming drawers are approved for installation below only certain specified cooktop models. See the label attached to the top of the warming drawer or underside of the cooktop for approved combinations.

4 3/4"

(12.1) max

G

4 3/4"

(12.1) max

SIDE VIEW SIDE VIEW

SIDE VIEW SIDE VIEW

For more details, refer to the installation instructions for this product on Monogram.com. Dimensions in parentheses are in centimetersZHU36RSJSS unless otherwise noted. ZHU36RSJSS

I W  hen installing the cooktop above a warming drawer, a solid barrier must be installed at least 5-1/2” from the top of the countertop. Use any solid material such as 1/4” thick plywood. Allow at least 1/4” air gap between the barrier and the top of the warming drawer. For more details refer to the installation instructions for this product

Product Specification Revised 4/15

Monogram® 36" Induction Cooktop

ZHU36RSJSS

FEATURES AND BENEFITS Glide Touch Controls – Easy to use electronic controls allow you to precisely raise or lower heat in an instant with one easy swipe Five Induction Cooking Elements – Enjoy a new level of rapid, precise heating with a cool-to-the-touch surface that's easy to clean 11" 3700W Induction Element – Rapidly boil water with our most powerful induction element SyncBurners – Control two 7" elements simultaneously to evenly heat large cookware or the included griddle Stainless Steel Clad Aluminum Griddle – Achieve even results with this lightweight griddle, tailored to fit Monogram SyncBurners

R

Melt Setting – Gently melt delicate foods without burning or scorching Multi-Element Timer – Manage up to five pans at once with individual timers for each element Control Lock Capability – Protects against unintended activation Custom Settings – Personalize your cooktop settings to fit your cooking style Pan Presence & Size Sensors – Cook efficiently with elements that heat to the size of your pan and shut off when no pan is present White LED Display with Patterned Silver Glass Surface – Enjoy a premium look that blends in with modern kitchen finishes Flush-Mount Capable – Optional accessory kit enables the cooktop to be flush inset into the countertop for a sleek, modern look Precision Cooking – Achieve restaurant quality results with an optional probe that wirelessly controls the temperature of your food. Ideal for Sous Vide, Slow Cooking, making candy, etc., or for any other cooking that requires precise control of temperature over time

Product Specification Revised 4/15