DRIVELINE SERVICES AUSTRALIA
P | F | E | W |
the underbody & power transmission specialists
(07) 3275 7600 (07) 3274 1435
[email protected] driveline.com.au ABN 83 064 482 613
MINING CATALOGUE
DRIVE HOCK
DURAS
SYSTEMS
branches
SUSPENSION
brisbane south brisbane north dubbo mackay melbourne newcastle north melbourne perth townsville
February 2015
1300-driveline driveline.com.au
heavy duty spline sets universal joints industrial balancing open cut mining
STRICTLY INTERNAL USE ONLY
power trailer & haul trucks underground mining light & ancilliary fleet bearings warranty
FAST facts | heavy duty spline sets BIGGER
STRONGER
CHEAPER
Driveline Services Australia are proud to offer their feature-packed heavy-duty spline set upgrades on all open cut and underground off-highway vehicle driveshafts. Delivering 30-40% longer life-hours than standard OE assemblies, Driveline’s heavy duty & extra heavy duty* shafts are the choice of more maintenance departments. * Model dependent
Make your shaft EHD with Driveline’s 15.5C kits. Ask us how today!
SUPERIOR FROM EVERY ANGLE Example to Suit: 785, 789, 793, 992, 994 38 SPLINE 101.6mm
26 SPLINE 137.435mm
heavy duty spline sets
• Increased stub OD • Larger, full-length splines • Glide-coated barrels (subject to part number) • Improved sealing configuration • Enhanced dust covers • 30-40% longer life-hours • Bolts straight in! (No other modifications required)
FAST facts | universal joints 3 Large range of OE spec & HD universal joints for all makes and models. 3 One part number = one universal joint with all the bolts needed for change-out - If your current supplier doesn’t do this, talk to us! 3 For Komatsu: Genuine Spicer Italcardano universal joints, greasable or lubed-for-life variations in a comprehensive range of sizes, in round bearing or C-type.
universal joints
3 For Caterpillar: Genuine Rockford universal joints produced in the USA to exacting tolerances and available in round bearing or C-type, greasable or lubed-for-life variations in a complete range of sizes.
FAST facts | industrial balancing 3 State-of-the-art computer controlled balancing ideal for the refurbishment & balancing of: 3 Fans 3 Wheel hubs 3 Industrial shafts 3 Armatures 3 Propellers
3 Impellers
3 Spindles
3 Centrifuges
3 Gyroscopes
3 Rollers
3 Beaters
3 Turbine shafts
3 Industrial shafts
3 Other large rotating parts & equipment
• Up to 3t maximum capacity
• Up to 2100mm of swing diameter
• 3050mm balancing bed
• Powerful 11kw engine
• Balances up to 1250rpm
• Accurate to within 12 r/min
• Up to 700 Nm torque
industrial balancing
3 Brake drums
FAST facts | open cut mining 3 Driveshafts
3 Axles
3 Universal Joints
3 Differentials
3 Final Drives
3 Drop Boxes
3 Transmissions
3 Torque Converters
3 Driveshaft design, modification, repair & balancing 3 We’re the manufacturer so all parts on shelf 3 Home of the HD Slip & Spline set - extends tailshaft service life by 30-40% 3 Complete replacement shafts for all makes and models of loaders, dozers, dumpers & drills 3 OE spec & HD universal joints (Spicer, European, Japanese)
open cut mining
3 Diff & gearbox rebuilds, testing & reconditioning
COMPREHENSIVE inventory available for: GRADERS CAT
14M
ARTICULATED DUMP TRUCKS CAT HITACHI TORO
D400E 725 735 740 AH SERIES R50+
DUMP TRUCKS 769 773 775 777 784 785 789 793 797 465 785
SURFACE & PIT HAULERS MACK KENWORTH
Titan Bigfoot C500 C510 & Full Power Trailer Support
open cut mining
CAT KOMATSU
COMPREHENSIVE inventory available for: WHEEL LOADERS CAT KOMATSU VOLVO
690 844 854 980 988 992 994 WA500 WA800 WA900 WA1200 L70 CR
DOZERS D9 D10 D11 475
open cut mining
CAT KOMATSU
FAST facts | power trailer & haul trucks 3 Extended driveline life hours. 3 We’re the manufacturer so all parts on shelf 3 Available in greasable and sealed Lubed for Life units 3 Home of the Mechanics HD Slip & Spline set - extends tailshaft service life by 30-40% 3 Repairs & complete replacement shafts for all makes and models of Kenworth, Mack & other tractors 3 Standardise the PSAs and JSAs (driveshafts & interaxles) across your on & off-highway fleet, reducing your costs, stock holdings & management 3 OE spec & HD universal joints (Spicer, Mechanics) 3 Brakes
3 Suspension 3 Wheel Bearings
power trailer & haul trucks
3 Braking Components
FAST facts | underground mining 3 Axles
3 Transmissions
3 Universal Joints
3 Differentials
3 Torque Converters 3 Driveshafts
3 Steering
3 Suspension
3 New & exchange underground diffs & axles 3 Axle parts & rebuild kits 3 Axle, differential, final drive, drop box, transmission & torque converter rebuilds, testing & reconditioning. 3 OE spec & HD universal joints (Spicer, European, Japanese) 3 Driveshaft design, modification, repair & balancing. 3 We’re the manufacturer so all parts on shelf 3 Home of the HD Slip & Spline set - extends tailshaft service life by 30-40% 3 Complete replacement shafts for all makes and models of loaders, haulers, dumpers, drills & transporters
underground mining
3 Underground steering & suspension solutions
FAST facts | axles & transmissions 3 Axera 3 SMV 3 ZF 3 Cat 3 Tamrock 3 Dana 3 Komatsu 3 Terex 3 Clark
3 Normet 3 Toro 3 Kessler 3 PJB 3 VLI 3 Volvo 3 Sandvik and more ...
3 Fast turnaround 3 Genuine Dana & Timken componentry 3 Competitive pricing 3 Detailed quote complete with photographic evidence 3 Expert engineering & assembly 3 Over 30 years of underbody & power transmission experience
TORQUE CONVERTERS
DIFFERENTIALS
genuine DANA axles and service exchange program
underground mining
TRANSMISSIONS
COMPREHENSIVE
rebuild & repair service for:
LOADERS/HAULERS/DRILLS CAT NEW MINING CAT EIMCO HITACHI JUG-A-O TORO WAGNER ...AND MANY MORE
and many more ... TRANSPORTERS
underground mining
JOY PJB SMV
FAST facts | light & ancilliary fleet 3 Standard, HD & EHD driveshaft design, modification, repair & balancing 3 New & remanufactured steering racks, boxes & pumps for light & auxilliary fleet 3‘‘Mine spec’ exchange diffs, gearboxes & transmissions 3 Brake discs, pads & rotors 3 ‘Mine spec’ CV joints & shafts 3 Universal joints 3 Centre bearings & inter-axle shafts 3 Gearbox, swivel and wheel bearing kits using top quality original equipment Koyo, NSK or Nachi bearings 3 SMART GVM suspension kits, standard, raised & HD
S uperior load carrying M inimal height increase A ll round comfort R eal safety benefits T ested & Federally certified
light & ancilliary fleet
(~20-25mm)
COMPREHENSIVE
parts & services for:
TOYOTA - Hilux KUN - Hilux LN167 - Hilux RZN149 - Hilux TGN16 - LandCruiser HZJ - LandCruiser UZJ - LandCruiser VDJ - LandCruiser Prado 90 - LandCruiser Prado 120 - LandCruiser Prado 150
NISSAN - Patrol Y61
ISUZU
MACK
KENWORTH
... and many others
light & ancilliary fleet
HINO
FAST facts | bearings 3 Complete range of Dodge Baldor ISN & SN bearings 3 Factory lubed, sealed and adjusted, ready to slip onto the shaft 3 Patented ISN adapter system installation/removal in just 15 minutes. 3 No feeler guages needed 3‘No clearance settings 3 No shaft damage 3 No problems!
ISN and IP Configuration Options ISN SERIES
Two-Bolt Plummer Blocks
30mm to 140mm
ISAF Series
Interchangeable with DODGE USAF and many competitive SAF products
IP SERIES
IP-E SERIES
Interchangeable with DODGE S-2000 Unitized Housings and many competitive products.
Our IP-E Bearing is now available with Type E Mounting Dimensions
Two-Bolt Plummer Blocks
1-1/8” up to 3-1/2”
1-1/8” to 4”
Four-Bolt Plummer Blocks
2-3/8” up to 5”
Two-Bolt Plummer BLocks Four-Bolt Plummer BLocks
2-1/4” up to 7”
Four Bolt Flanges
Two-Bolt Plummer Blocks
Four-Bolt Flanges
1-3/16” up to 4-1/2”
Four-Bolt Plummer Blocks
Flange Bearings Piloted
Piloted Flanges 1-3/16” up to 5”
1-7/16” up to 3-7/16” 2-7/16” up to 7”
1-1/8” up to 4” 1-1/8” to 5”
Wide Slot Take-Up
Wide Slot Take-ups
1-1/8” up to 4”
1-1/8” to 4” Inserts
1-1/8” to 7”
bearings
Interchangeable with competitive SN products.
FAST facts | isn bearings
NO
feeler gauges. clearance settings. shaft damage. problems.
ON/OFF
IN JUST 15 MINUTES Ready to roll… • Factory lubed, sealed and adjusted, ready to slip onto the shaft • Fully contained TRIDENT face-rubbing seal does not run on shaft and gives 100% contact at 100% constant pressure, 100% of the time • Patented IMPERIAL adapter sleeve concentricity virtually eliminates fretting corrosion • Field convertible from non-expansion to expansion and expansion to non-expansion • Elongated bolt holes for easy mounting • Available in 30-140mm bore pillow block housings (dimensionally interchangeable with SN 500 standard DIN 736/ISO 113)
Corrosion resistant flinger blocks contaminants
Seal/Land maintains full seal contact when misaligned
Patented triple lip Nitrile Seal resists heat and chemical breakdown Ease in mounting and dismounting achieved through patented adapter system
Adapter sleeve improves concentricity and reduces inherent vibration
bearings
Steel cage with guide rings offers precision roller guidance
FAST facts | warranty 3 All mining products covered by a full & comprehensive warranty 3 Proven in the field 3 All products guaranteed to be free from defects in materials and workmanship 3 $20,000,000 public liability coverage
warranty
3 Products proven and backed
WARRANTY | policy MINING PRODUCTS DRIVELINE SERVICES AUSTRALIA PTY LTD (“the Company”) warrants to the original purchaser that all products purchased from the Company for use in mining-related activities will be free of defects in materials and workmanship, subject to the following conditions:
1. The period of this warranty, to the original purchaser only, will be for:
a. D riveshafts and universal joints: six months or 2,000 hours from the date of original purchase, whichever occurs first. b. Light vehicle products, including tailshafts, constant velocity, steering, suspension and brake components: one month or 1,000 km from the date of original purchase, whichever occurs first. c. D iff and gearbox rebuilds: one month or 1,000 km from the date of original purchase, whichever occurs first. d. H eavy vehicle axles and transmissions: one month or 500 hours from the date of original purchase, whichever occurs first. e. I ndustrial balancing work: six months or 2,000 hours from the date of original purchase, whichever occurs first. 2. This warranty is subject to the following limitations:
a. D amage caused by improper installation, misuse, collision, accident or subject to comprehensive insurance claim. b. The unit must have been installed by a qualified motor repairer/fitter in accordance with the vehicle manufacturer’s instructions. c. R emoving, dismantling, modifying or otherwise tampering with the product without prior written authorisation from the Company will render the warranty void. d. T his warranty does not cover any vehicle modified in any way from the factory specifications. e. T his warranty does not cover any vehicle subjected to misuse, neglect or contamination. f. T his warranty does not cover any vehicle used in motorsport or speed trials. g. This warranty is not transferable on the sale of the vehicle.
3. Subject to the above conditions, liability under this warranty is limited to the replacement of an item proven to the company’s reasonable satisfaction to be defective in materials or workmanship. No liability is accepted for any transport, removal, installation, towing or other associated costs. The cost of labour, including wheel alignments, will not be considered.
4. Claims under this warranty policy must be commenced by submitting to the Company a completed copy of the Company’s standard Request for Return Authorisation form (available from the Company on request), including a detailed description of why or how the product failed and proof of the date and mileage of the vehicle at the time of original fitment and time of failure. The Company will then advise if the product is to be returned for inspection, which, if so required, must be arranged by the purchaser within 14 days on a freight pre-paid basis, quoting the Return Authority Number provided by the Company.
5. The terms of this warranty policy, as set out above, take precedence over any other warranty written, spoken or implied by any persons, whether employed by the Company or not.
warranty
WARRANTY | public liability Ed Watson Client Service Consultants Marsh Pty Ltd ABN 86 004 651 512 123 Eagle Street BRISBANE QLD 4000 GPO Box 2743 BRISBANE QLD 4001 07 3115 4519 Fax 07 3115 4557
[email protected] www.marsh.com.au
28 October 2014
Certificate of Currency This certificate is issued as a matter of information only and confers no rights upon the holder. It does not amend, extend or alter the coverage afforded by the policy/policies listed. It is provided as a summary only of the cover provided and is current only at the date of issue. For full particulars, reference must be made to the current policy wording.
Class of Insurance:
Liability
Insurer:
Richard Oliver Underwriting Managers Pty Ltd (various Lloyd’s of London syndicates)
Policy Number:
B080412196F13008
Insured:
Driveline Services Australia Pty Ltd and its/their subsidiary and related bodies corporate, as defined in the Corporations Law, controlled entities and other entities for which the Insured has assumed an obligation to arrange insurance (including those acquired or incorporated during the Period of Insurance) for their respective rights, titles and interests.
Other Interested Parties: Period of Insurance:
From 31 October 2014 to 31 October 2015 at 4.00 p.m. Australian Eastern Standard Time
Covering:
Limits of Liability Public Liability Product Liability
56 Colebard Street East, Acacia Ridge and all other Driveline Services Australia Pty Ltd premises across Australia.
The information contained in this facsimile message is confidential, may be privileged, and is intended for the use of the individual or entity named above. If you, the reader of this message, are not the intended recipient, the agent, or employee responsible for delivering this transmission to the intended recipient, you are expressly prohibited from copying, disseminating, distributing or in any other way using any of the information in this facsimile message. If this communication contains personal information we expect you to treat that information in accordance with the Australian Privacy Act 1988 (Cth) or equivalent. You must advise us if you cannot comply.
warranty
Premises:
$20,000,000 $20,000,000
TOWNSVILLE MACKAY
BRISBANE NORTH BRISBANE SOUTH
PERTH
DUBBO
NEWCASTLE
NORTH MELBOURNE MELBOURNE
1300
driveline | driveline.com.au