Minimum and Maximums LINCOLN WOOD PRODUCTS, INC. Casements - Operating Casement Style Double Hung Transom
• • • •
Minimum Glass Size of 10 x 12 Maximum Glass Size 32 x 79 Push Out Casement Minimum Glass Size of 10 x 16 Push Out Casement - Minimum Height = 21” Glass for Wood Screen Option • 8:1 glass ratio must be tempered
• Maximum Glass Size of 96-3/8” when used over a double hung studio unit • 28” 3 wide is the largest 1 lite transom (95-1/4” Glass) used over mulled units - Glass width larger than 96” will be a multiple unit • 8:1 glass ratio must be tempered
Casement - Stationary
Double Hung Studio / Lincoln Fit DH Studio
• Minimum Glass size of 8 x 8 • Maximum Glass Size of 96 x 72 - Cannot be larger in width or height
• • • • •
Minimum Glass Size of 9-3/8 x 26 - Lincoln Studio Minimum Glass Size of 10 x 25-1/8” - WV Studio Maximum Glass Size of 96-1/2 x 74 or 83 x 86 Minimum Glass size of 8” x 8” - Lincoln Fit Studio Maximum Glass Size of 96 x 85-5/8 - Lincoln Fit Studio Note: 49 square feet maximum for I.G., Tempered and Low-E double pane glass Note: 38 square feet maximum for single pane 1 lite units • 38 square feet maximum for wood single pane TDL units • 48 square feet maximum for wood double pane TDL units • 8:1 glass ratio must be tempered
Note: 48 square feet maximum for I.G., tempered and low-E double pane glass. Units that exceed 48 x 48 will be made with 1” glass Note: 38 square feet maximum for single pane 1 lite units • 38 square feet maximum for wood single pane TDL units • 48 square feet maximum for wood double pane TDL units. • 8:1 glass ratio must be tempered
Casement Bow / Bay Windows
Double Gliders
• U.D. width not to exceed 144”
• Minimum Glass Size of 12 x 12 • Maximum Glass Size of 32-1/8 x 54
Casement Transoms Note: Units larger than 32 x 48 must disclaimed No Warranty for Operation or Performance
• Maximum glass width of 96” when used over a casement studio unit • 28” 3 wide is the largest 1 lite transom (94” Glass) used over mulled units - Glass width larger than 96” will be a multiple unit • 8:1 glass ratio must be tempered
Triple Gliders • Minimum Glass Size of 16/32/16 x 24 • Maximum Glass Size of 24/48/24 x 54
Operating Awnings
Slide Door
• Minimum Glass Size of 12 x 12 • Maximum Glass Size of 48 x 48 • Push Out Awning – 16 x 12
• Minimum Glass Size of 7-9/16” x 36” (Stationary) • Minimum Glass Size of 25” x 36” (Narrow Stile -Operating) • Minimum Glass Size of 21-5/8” x 36” (Wide Stile Operating) • Maximum Glass Size of 43” x 89-7/8” Note: All door glass is tempered
Note: Units larger than 36 x 36 must be disclaimed – No Warranty for Operation or Performance
Double Hung/Single Hung/Lincoln Fit Slide Door Transoms
• Minimum Glass Size of 12 x 12 • DH Maximum Glass Size of 40 x 42 – Wide Rail • DH Maximum Glass Size of 40 x 43-1/16 – Narrow Rail
• 9/0 Full size (112-13/16” glass) is the largest 1 lite unit that will be made. Glass width larger than 112-13/16” will be a multiple unit. • 8:1 glass ratio must be tempered
Replacement Kit Note: Local code may require transom glass to be tempered
• Minimum Glass Size of 16 x 12 • Maximum Glass Size of 40 x 36
Double Hung Style Transom • Minimum Glass Size of 8 x 12 • Maximum Glass Size of 40 x 22 • 8:1 glass ratio must be tempered
1
10/20/2016
Minimum and Maximums LINCOLN WOOD PRODUCTS, INC.
In-Swing / Out-Swing Doors
Radius and Geometric Sash Set Units - 3/4” Glass
Minimum Glass Size of 7-9/16” x 61” (Narrow Stile SL – Fixed or Operable • Maximum Glass Size of 39-5/8” x 94” (7” Rail) • Maximum Glass Size of 39-5/8” x 96-3/8” (4” Rail) • Radius Door - 72” Frame Radius Only • Radius Door - 6/0 w/ Attached 3/0 Sidelite - Not Available Note: Doors without 3 point or 5 point hardware and with handicap sills are not warranted for air, water, structural performance. Note: Doors smaller than 62” glass height can be made with double bore only.
• Radius and Geometric Shapes not to exceed 27 square feet w/internal grills and 35 square feet w/o Internal grills -Double Pane • Radius and Geometric Shapes not to exceed 38 square feet - Single Pane • 13-1/2” Minimum Sash Radius for Clad Sash Set • 29” Minimum Box Size for Sash Set Half Rounds
•
Note: Square footage is based on actual glass size not a rectangular piece of glass.
Segment Head Casements
•
Stationary Door - Minimum glass size of 7-9/16” x 61”
•
Stationary Door - Maximum glass size of 27-3/4” x 94”
•
•
Transoms - 9/0 Full size (105-1/2” glass) is the largest 1 lite unit that will be made. Glass width larger than 1051/2” will be a multiple unit
•
Segment Head Single Hung
Note: Local code may require transom glass to be tempered •
Glass sizes offered in 16”, 20”, 24”, 28 “ & 32 widths only x all standard heights Minimum Height for Frame Hinge Leg is 25”
8:1 glass ratio must be tempered
• •
Minimum Glass Size of 16 x 12 Maximum Glass Size of 40 x 36 -Note: When converted into a single hung a maximum glass size of 40 x 42 is allowable
• •
Minimum Glass Size of 32 x 32 Maximum Glass Size of 48 x 52
• • •
Minimum Glass Size Width of 24” - Wood & Clad Maximum Glass Size of 40 x 32 8:1 glass ratio must be tempered
Quantum Double Hung • • • •
Quantum Segment Head
Minimum Glass Size of 16 x 16 Maximum Glass Size of 48 x 52 8:1 glass ratio must be tempered Minimum frame radius in house for clad units is 72”. Windows with smaller radius must be stretch bent and will be handled as individual request.
1/2 Round Single Hung
Quantum Double Hung Studio • •
Minimum Glass Size of 36 x 32-7/8 Maximum Glass Size of 72 x 104-7/8” - Cannot be larger in width or height
Note: Units do not meet egress opening requirements
French Casement
Note: 52 square feet maximum for I.G., tempered and low-E double pane glass Note: 38 square feet maximum for single pane 1 lite units • 38 square feet maximum for wood single pane TDL units • 52 square feet maximum for wood double pane TDL units • 8:1 glass ratio must be tempered
•
WV Double Hung • •
Direct Set • •
Minimum Box (Rectangle) - 12” x 12” 12’ Maximum in either width or height, not to exceed 50 square ft.
Minimum Glass Size of 12 x 12 - Operating Unit Minimum Glass Size of 10 x 10 - Studio Units
Jamb Extensions •
Note: This applies to I.G., tempered and low-E double pane glass. • 38 square feet maximum for single pane 1 lite unit • 38 square feet maximum for wood single pane TDL units. • 48 square feet maximum for wood double pane TDL units. • 8:1 glass ratio must be tempered • Corner Window: One leg can be 96” max frame size. Second leg can only be a max of 72” frame size. Max Height = 96” Note: Square footage is based on actual glass size not a rectangular piece of glass
Glass sizes in 14-7/16”, 16-7/16”, 20-7/16” & 24-7/16” widths only x 34, 36, 42, 48, 54, 60, 68 & 72 heights only. No custom sizes allowed.
Maximum applied jamb extension - 9”
Flat Casing •
2
Maximum applied f at casing - 12’ x 8”
10/20/2016
Direct SetLINCOLN Minimum and Maximums WOOD PRODUCTS, INC. HALF ROUNDS
QUARTER ROUNDS
EXTENDED LEG QUARTER ROUNDS Minimum 4” Minimum Leg: Base:14” MaximumBase: Base: 14” 84” Minimum
B
B
Maximum Base: 84” A A
C
Minimum Base: 14” Maximum Base: 84”
Minimum Diameter: 18” (24” for WV) Maximum Diameter: 144”
A
EXTENDED LEG HALF ROUNDS
EXTENDED LEG ELLIPSE
B
ELLIPSE B
B B
C
A
A Minimum Leg: Leg: 4" 4” Minimum Minimum Base:30" Base: 30” Minimum Maximum Maximum Base: Base: 144" 144”
Minimum Height: 12” Minimum Base: 30” Maximum Base: 144”
C
A Minimum Base: 18” (24” for WV) Maximum Base: 144”
EXTENDED LEG GOTHIC
GOTHIC
B
SEGMENT
B
A Minimum Height: 10” (*) Minimum Base: 21” Maximum Base: 144”
B
(*) Mininum height limitation may be larger than 10” Larger base widths require a larger height for manufacturing
C A Minimum Base: 14” Maximum Base: 144”
A Minimum Base: 20” Maximum Base: 144”
OVAL
CIRCLE
EXTENDED LEG SEGMENTS
B
R R C C
B
A
B
A Minimum Leg: 4” Minimum Base: 14” Maximum Base: 144” Minimum Radius: 9”
A A
A
Minimum Diameter: 18” (24” for WV) Maximum Diameter: 84”
A
Minimum Width: 20” Maximum Height: 144” (*) Maximum Width: 84”
(*) Maximum height limitation may be smaller than 144” Some widths require a smaller height for manufacturing.
Specialty units are available within the above parameters, other custom shapes are available upon request. Units not to exceed 48 square ft.
3
10/20/2016
Direct SetLINCOLN Minimum and Maximums WOOD PRODUCTS, INC. TRAPEZOID
RECTANGLE
B
OCTAGON
B C
A
A
A
Maximum Base: 144”
RIGHT Minimum Side: 4” Maximum Base: 144”
Minimum Side: 6” Maximum Base: 72”
TRAPEZOID
PARALLELOGRAM
EXTENDED OCTAGON
D E B B
B C C A
A
A
RIGHT Minimum Side: 4” Maximum Base: 144”
RIGHT Minimum Side: 4” Maximum Base: 144”
Minimum Side: 6” Maximum Base: 72”
TRIANGLE
PENTOID
C
B
B C
A
A RIGHT Minimum Pitch: 4/12 - Clad & Wood Maximum Base: 144” Minimum Pitch: 5/12 - WV
Minimum Side: 4” Maximum Base: 144”
Specialty units are available within the above parameters, other custom shapes are available upon request. Units not to exceed 48 square ft.
4
10/20/2016
Sash Set LINCOLN Minimum and Maximums WOOD PRODUCTS, INC. HALF ROUNDS
QUARTER ROUNDS
EXTENDED LEG QUARTER ROUNDS MinimumBase:14” Leg: 6” Minimum Maximum MinimumBase: Base:84” 14” Maximum Base: 84”
B
B
B A A Minimum Base: 14” Maximum Base: 84”
Minimum Diameter: 29” Maximum Diameter: 96”
C
A
EXTENDED LEG HALF ROUNDS
CIRCLE
EXTENDED LEG GOTHIC B C B A A
Minimum Diameter: 29” Maximum Diameter: 84”
SEGMENT
Minimum Base:29” Base: 29” Minimum Maximum Base: 96” M Maximum Base: 96”
C A Minimum Base: 20” Minimum Leg; 6” Maximum Base: 96”
B
GOTHIC A Minimum Base: 21” Maximum Base: 96” B
EXTENDED LEG SEGMENTS R
R
A
C
B A Minimum Leg: 6” Minimum Base: 14” Maximum Base: 96” Minimum Radius: 14-1/2”
B
Minimum Base: 20” Maximum Base: 96”
C A
A
A
Minimum Leg: 6” Minimum Base: 14” Maximum Base: 144”
Specialty units are available within the above parameters, other custom shapes are available upon request. Units not to exceed 27 square feet w/internal grills and 35 square feet w/o Internal grills - Double Pane. Units not to exceed 38 square feet - Single Pane
5
10/20/2016
Sash Set LINCOLN Minimum and Maximums WOOD PRODUCTS, INC. TRAPEZOID
RECTANGLE
OCTAGON
B
B
B
C
A
A
A
Maximum Size: 96 x 72
RIGHT Minimum Side: 6” Maximum Base: 96”
Minimum Side: 6” Maximum Base: 72”
TRAPEZOID
PARALLELOGRAM
EXTENDED OCTAGON
D E
B
B
C
B
C
A
A
C A
RIGHT Minimum Side: 6” Maximum Base: 96”
RIGHT Minimum Side: 6” Maximum Base: 96”
Minimum Side: 6” Maximum Base: 72”
TRIANGLE
B
PENTOID
C
C B
A RIGHT Minimum 4/12 Pitch Maximum Base: 96”
A Minimum Side: 6” Maximum Base: 96”
Specialty units are available within the above parameters, other custom shapes are available upon request. Units not to exceed 27 square feet w/internal grills and 35 square feet w/o Internal grills - Double Pane. Units not to exceed 38 square feet - Single Pane
6
10/20/2016
GlassLINCOLN & Truck Limitations WOOD PRODUCTS, INC. Grill Limitations
Glass Limitations
• 1/8” GLASS – Up to 15 square feet
40° Minimum Angle Between Diamond Grill Patterns Wood & SDL Grids Only (See Drawing Below)
• 5/32” GLASS – 15 to 24 square feet • 3/16” GLASS – 24 to 34 square feet • 1/4” GLASS – 34 to 44 square feet • 1/8” Tempered – maximum 16 square feet, maximum width 34”, maximum height 80” • 1/4” LAMINATED – maximum sheet size 60” x 96” • 1/8” LAMINATED – maximum sheet size 48” x 84” – cannot exceed 9 square feet • 5/32” PATTERN “62” – maximum sheet size 60” x 84” • TEMPERED GLASS – 82” X 142” maximum sheet – must not exceed our square foot limitations, even if within our limitations cannot exceed 82” in either direction. • MINIMUM TEMPERED SIZE = 6” X 9” • When matching Low “E” with solar cool bronze or grey glass the Low “E” lite must be tempered. • Our 7/16” overall glass causes some combinations to be unavailable. For example, pattern “62” glass is 5/32” thick and cannot be matched with tempered for this thickness of glass. • “V” Groove glass – the thickness of the glass increases one increment in order to be grooved. Example, normal 1/8” glass would have to increase to 5/32”. Again thin spacer can be a problem. • Spandrel Glass is only available in ¼” thickness and must be matched with either heat strengthened or tempered lite. This could again cause problems with our overall glass thickness.
Grill Limitations Minimum Diameter for Radius Bars
• 8:1 Glass Ratio Must be Tempered
SDL - 6” Inside Diameter TDL - 10” Inside Diameter Internal Grid - 8” On-Center Diameter
Truck Limitations
• 16’ x 103” Maximum Size
Minimum Distance Between SDL Notches = 3”
Back Band Trim Bending Limitation One Piece Prof le - 36” wide 1/2 round (18” Radius). Two Piece Prof le - 21” wide 1/2 round when used with 3-1/2” f at casing. Wider f at casing will have different limitations.
IF YOU HAVE QUESTIONS REGARDING SIZES OUTSIDE OF THESE LIMITIATION, CONTACT YOUR SUPERVISOR 7
10/20/2016
IG Unit Size & Square Footage Limits LINCOLN WOOD PRODUCTS, INC.
1
CARDINAL IG UNIT SIZE LIMITS AND MAXIMUM DIMENSIONS PER AIR SPACE ANNEALED GLASS
Maximum Dimensions Per Air Space
HEAT TREATED GLASS
*ODVV 7KLFNQHVV PP
0D[LPXP$UHD IWð 0LQLPXP 5HFRPPHQGHG 6KRUW*ODVV 0D[LPXP 0D[LPXP 0D[LPXP $VSHFW5DWLR $VSHFW5DWLR 'LPHQVLRQIRU /RQJ 6KRUW /RQJ /HVVWKDQ *UHDWHUWKDQ $UJRQ)LOOHG 'LPHQVLRQLQ 'LPHQVLRQLQ 'LPHQVLRQLQ 8QLW LQ
0D[LPXP$UHD IWð
0D[LPXP 0D[LPXP $LUVSDFH /RQJ 'LPHQVLRQ 'LPHQVLRQ $UHD PP IWð LQ
!
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
Cardinal IG Square Foot Limits ANNEALED GLASS
HEAT STRENGTHENED or TEMPERED GLASS
Squareness Factor
IG Construction
Maximum Square Footage
Maximum Length
Maximum Square Footage
Max Short Dimension (inches)
Maximum Length
PPPP PPPP PPPP PPPP PPPP
LQFKHV LQFKHV LQFKHV LQFKHV LQFKHV
1$
1$
LQFKHV LQFKHV LQFKHV LQFKHV LQFKHV
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
8
10/20/2016