Micro-USB connectors meeting USB 2.0 Standard ZX Series
Note: Contact us to ascertain whether a TID number has been acquired for an individual product.
Fig.1
■Overview Extremely small highly reliable connectors complying with physical, electrical and environmental requirements of Micro-USB standard (USB 2.0). Receptacles and plugs are available in a wide variety of mounting and termination styles, allowing their use in various applications.
Reverse (Top mount)
Drop-in (Mid-mount)
Standard (Bottom mount)
■Features 1. Size reduction Compared with the standard Mini-USB connectors, the size of ZX connectors is reduced by approximately 60% while still allowing a high-speed data transfer of 480 Mbps, specified in USB 2.0.
2. Receptacle styles Two interface configurations: Micro-B and Micro-AB in standard, mid-mount and reverse mounting styles. SMT and through-hole (shell) PC board terminations.
Fig.2
3. Plug styles Corresponding to the receptacle styles, two interface configurations: Micro-A and Micro-B, with direct wire or PCB wire soldering. Several plug styles can be used for data transmission, earphone or charging applications.
USB 2.0 Hi-Speed (480 Mbps) Eye diagram measurement results: Measured with 2.4 m long USB 2.0 cable
A smooth mating and unmating operation results in less wear and a longer product life. The unique Hirose active latch mechanism produces a reliable and durable connector. Even after repeated use, the user will experience a smooth click sensation when mating the connectors. Note: The statement above only applies when using both plug and receptacles made by Hirose Electric.
200 mV/div
4. Smooth mating and unmating TP2
500ps/div Fig.3
5. Hirose was the first company to obtain a Micro-USB certification (TID number).
2014.8w
1
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Specifications Ratings
Current rating
1 A (per contact) or
Voltage rating
30 V AC
1.8 A (contacts No. 1 and 5) and
Operating temperature range
-30°C to +85 °C (Note1)
0.5 A (contacts No. 2, 3, and 4)
Storage temperature range
-30 °C to +60°C
Item
Specification
Conditions
1. Contact resistance
30 mø max.
100 mA
2. Withstanding voltage
No flashover or insulation breakdown
100 V AC / 1 minute
3. Capacitance
2 pF max.
Between adjacent contacts at 1,000 Hz (AC voltage)
4. Durability
Contact resistance: Rise from initial value of 10 mø max. 10,000 cycles
5. Total insertion/removal force
Insertion force: 35 N max., Removal force: 8 N min.
Mated with corresponding connector
Note1: Includes temperature rise caused by current flow. Note2: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown.
■Materials ●Receptacles Part
Material
Finish
Remarks
Insulator
LCP
Micro-B: Black, Micro-AB: Gray
UL94V-0
Contacts
Copper alloy
Selective gold plated
---------------
Shell
Stainless steel
Tin alloy plating
---------------
●Plugs Part
Material
Finish
Remarks
Insulator
LCP
Micro-B: Black, Micro-AB: Gray
UL94V-0
Contacts
Copper alloy
Selective gold plated
---------------
Shell
Stainless steel
Tin alloy plating
---------------
■Ordering information ●Receptacles
ZX 62 RD - B - 5 P * 8 q
w
e
t
r
y
u
i
●Plugs
ZX 40 - B - 5 S * - UNIT q
w
r
t
y
u
o
ZX 40 - B - SLDA q
Interface Micro-A
Micro-B
Micro-AB
2
w
r
Receptacle
o
Plug
qSeries name wTermination style
eBoard mounting style (Receptacles)
ZX 10's: Right-angle PCB wire, SMT 20's: Straight, PCB wire 40's: Direct wire 60's: Right-angle, PCB wire 80's: Cradle SMT Standard (Bottom mount) Standard (Bottom mount) through hole Reverse (Top mount) Reverse (Top mount) through hole Drop-in (Mid-mount) Micro-A Micro-B Micro-AB 5 Receptacle- Male Plug – Female
Blank D R RD M rMating side configuration A B AB tNumber of contacts yContact type P S uSerial No. iShell termination style – Blank SMT Receptacles 8 Through hole (solder tab length: 0.8mm) oComponents-plugs UNIT Assembly (Insulator/contact/lock) Cover (Note 1) Note 1: Classifiers such as A, B, and C are entered for *.
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Configurations Mating side configuration
Type
Part No.
3D Image
Page
SMT
ZX62-B-5PA(11)
4
SMT + DIP
ZX62D-B-5PA8
4
Reverse
SMT
ZX62R-B-5P
5
Drop-in
SMT
ZX62M-B-5P(01)
5
SMT
ZX62-AB-5PA(11)
6
SMT + DIP
ZX62D-AB-5P8
6
SMT
ZX62R-AB-5P
7
SMT + DIP
ZX62RD-AB-5P8
7
Direct wire soldering
Assembly :ZX40-B-5S-UNIT(12) (insulator/contacts/lock) Cover-top :ZX40-B-SLDA Cover-bottom :ZX40-SLDB
9 and 10
PCB wire soldering (straight, through hole)
Assembly :ZX20-B-5S-UNIT (insulator/contacts/lock) Cover :ZX20-B-SLDC
PCB wire soldering (SMT)
Assembly :ZX64-B-5S-UNIT(14) (insulator/contacts/lock) Cover-top :ZX64-B-SLDA Cover- bottom :ZX64-SLDB
12 and 13
PCB wire soldering (SMT)
Assembly :ZX64-B-5S-UNIT(14) (insulator/contacts/lock) Cover :ZX64-B-SLDC
12 and 14
Assembly :ZX40-A-5S-UNIT (insulator/contacts/lock) Cover-top :ZX40-A-SLDA Cover- bottom :ZX40-SLDB
15 and 16
Standard
R e c e p t a c l e s
Micro-B
Standard
Micro-AB
Cradles
P l u g s
Reverse
Micro-B
Micro-A
Direct wire soldering
Micro-B
SMT + DIP
11
ZX80-B-5S
With lock
17
ZX80-B-5SA
Without lock
17
Note: 1. Part numbers in the Plugs section of the above table list the Assembly (insulator/contacts/locks) and the corresponding Shields/Covers. Note: 2. Optional Printed Circuit boards for the Plugs are shown for reference only. Not supplied with applicable connectors. Note: 3. The color of the insulators body in the Assembly (insulator/contacts/lock) shown in the 3D Image column above is blue for clarity. Refer to the Materials (Page 2) for correct colors.
3
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Receptacles ●Micro B - Standard (Bottom mount), Shell SMT Part No.
HRS No.
Packaging
ZX62-B-5PA(11)
242-0033-8 11
3,500 pcs/reel
BRecommended PCB mounting pattern 8.3 4.1 2.6
0.6
7.5
4.3 6.2 9.8
2.5
1.45
0.5
5
2.8
1.6
3.35
1.35 1.9
No.5 1.3 0.4
No.1 NO CONDUCTIVE TRACES
PCB EDGE No.1
7.9
No.5
2.15
All dimensions: mm
●Micro B - Standard (Bottom mount), Shell through hole Part No.
HRS No.
Packaging
ZX62D-B-5PA8
242-0056-3
2,000 pcs/reel
BRecommended PCB mounting pattern 4.85 2.6 0.65 0.4 D) No.1
1.05(LAND) 0.65(TH) No.5 1.35
AN
7.5
4.1 5.2 7.2 9.4
PCB EDGE
5
2.5
0.5
1.3
R0.325(TH) 0.5(TH)
0.6
2.75
NO CONDUCTIVE TRACES (TH) .3 R0
1.5(TH) 1.9
2.9
R0.5(LAND)
R0.325(TH)
No.1
4.85 7.2
0.8
5(L
3.35
.52
0.2 0.1
1.25(LAND) 0.85(TH)
R0
2.15
2.9
No.5
All dimensions: mm
4
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Receptacles ●Micro B - Reverse (Top mount) Shell SMT Part No.
HRS No.
Packaging
ZX62R-B-5P
242-0028-8
2,000 pcs/reel
BRecommended PCB8.3 mounting pattern 4.1 2.6 1.3
No.1
No.5
1.35
0.5 2.9 3.9 5.6 6.6 9.8
0.6
No.1
5
2.5
1.45
1.9
2
3.35
0.4
0.43
No.5
NO CONDUCTIVE TRACES
2.15
7.5 8.8
All dimensions: mm
●Micro B - Drop-in (Mid-mount), Shell SMT Part No. ZX62M-B-5P(01)
HRS No.
Packaging
242-0024-7 01
1,500 pcs/reel
BRecommended PCB mounting pattern
2.74 4.3
5 5.3
2.4
4.8
1.9
3.6
1.05
0.6
0.4 1.3 2.6 6.9 7.8 8.8 12
PCB EDGE
1.25
2.4
1.5
1.4
No.5
3
7.15
4.3
0.
5.15
1.9
7.5
C
.4 R0
No.1
4.7 2
1.23
11.5 7.5
No.5
No.1 0.25 1.3 2.6 4.7
All dimensions: mm
5
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Receptacles ●Micro AB - Standard (Bottom mount), Shell SMT Part No.
HRS No.
Packaging
ZX62-AB-5PA(11)
242-0045-7 11
3,500 pcs/reel
8.3 4.1 2.6 1.3
No.1
No.5
3.35
1.6
0.4
1.35
BRecommended PCB mounting pattern
0.6
5
2.5
2.8
1.9
0.5 4.3 6.2 9.8
1.45
7.5
PCB EDGE NO CONDUCTIVE TRACES
No.1
No.5
8.8
2.15
●Micro AB - Standard (Bottom mount), Shell through hole
All dimensions: mm Part No.
HRS No.
Packaging
ZX62D-AB-5P8
242-0027-5
2,000 pcs/reel
0.4 No.1
1.05(LAND) 0.65(TH) NO CONDUCTIVE TRACES No.5 1.35 1.5 1.7
(0.325) (0.5)
6
0.5 4.1 5.2 7.35(TH) 9(TH) 9.4
0.6
5
2.025
3.125
2.5
1.3 1.5(TH) 1.9
R0.5(LAND) PCB EDGE
7.5
2.625
R0.25(TH)
2.8
R0.3(TH)
No.1
4.45 8.35
0.6
0.85(TH)
R0.45(LAND)
4.45 2.6 1.3
3.475
3.125
1.25(LAND)
BRecommended PCB mounting pattern
No.5
All dimensions: mm
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Receptacles ●Micro AB - Reverse (Top mount), Shell SMT Part No.
HRS No.
Packaging
ZX62R-AB-5P
242-0035-3
2,000 pcs/reel
BRecommended PCB mounting pattern 8.3 4.1 2.6 1.3
No.5 NO CONDUCTIVE TRACES
No.1
1.45 0.43
0.5
PCB EDGE No.5
.4
R0
4-
2.9 0.85 4.75 6.6 9.8
7.5
0.6
5
2.5
1.9
3.35
1.6
1.35
0.4
8.8
No.1
●Micro AB - Reverse (Top mount), Shell through hole
2.15
All dimensions: mm Part No.
HRS No.
Packaging
ZX62RD-AB-5P8
242-0025-0
2,000 pcs/reel
BRecommended PCB mounting pattern R0.45(LAND)
No.1
R0.2MAX 1.05(LAND) 0.65(TH)
1.35 1.5 1.7
NO CONDUCTIVE TRACES
7.5
No.1
0.6
5
2.5
No.5
R0 .5( LA ND )
4.45 8.35
0.6
1.9
4.75
0.85
1.5(TH)
2.9
1.3
(TH) (0.325) R0.3 (0.5)
3.475
3.125 0.555
0.4
2.625
No.5
1.25(LAND) 0.85(TH)
R0.25(TH)
9.4 9(TH) 7.35(TH) 6.6 4.45 2.6 1.3
2.025
3.125
All dimensions: mm
PCB EDGE
7
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
Plugs – assembled (not-terminated, without overmold)
Components
ZX40 - Direct wire soldering ZX40-*-SLDA Cover-top
ZX40-*-5S-UNIT Assembly (insulator/ contacts/lock) *No PCB required
ZX40-SLDB Cover-bottom
ZX20 - PCB wire soldering ZX20-*-SLDC Cover
ZX20-*-5S-UNIT Assembly (insulator/contacts/lock) *Vertical through hole PCB termination
ZX64 - PCB wire soldering ZX64-*-SLDA Cover-top
ZX64-*-5S-UNIT Assembly (insulator/ contacts/lock) *Right angle through hole PCB termination
ZX64-SLDB Cover-bottom
8
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs ●Micro B - Assembly (insulator/contacts/lock) – Direct wire soldering Part No.
HRS No.
Packaging
ZX40-B-5S-UNIT(12)
242-0002-4 12
4,000 pcs/reel
14.1
Contact HRS for Cable Termination Procedure Manual.
7.9 No.1
4.2
No.5
All dimensions: mm
●Micro B - Component, Cover-top - Direct wire soldering HRS No.
Packaging
ZX40-B-SLDA
242-0003-7
4,000 pcs/reel
22.6
Part No.
6.85
1.8
8
All dimensions: mm
9
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs
16.2
16.2
●Micro A, Micro B - Component, Cover-bottom - Direct wire soldering
8
8
All dimensions: mm
ZX40-SLDB(3.3)
ZX40-SLDB Part No.
HRS No.
ZX40-SLDB
242-0004-0
ZX40-SLDB(3.3)
242-0023-4
Packaging
Cable dia. Ø3.8
4,000 pcs/reel
Ø3.3
22.6
●Assembled
6.85
1.8
4.75
8.6
All dimensions: mm
10
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs ●Micro B - Assembly (insulator/contacts/lock) - Vertical through hole PCB wire soldering (non-direct) Part No.
HRS No.
Packaging
ZX20-B-5S-UNIT
242-0012-8 00
4,000 pcs/pks
Contact HRS for Cable Termination Procedure Manual.
1 1.4
2.6 1.3 5-0.15
PCB mounting pattern
(Th 0.7
No.5 1(Land)
10.25
R0
7.9 No.1 0.35 1.55
No.5 3.975
d)
.3(T
8.2
1.6(Land)
1.55
e) hol hro
(Lan
ugh
1.3 2.6
R0.5
1.2(Through hole)
4.2
5-Ø
)
nd
0.6(Through hole)
La
.1(
No.1
rou
Ø1 5-
gh
ho
le)
12.2
*PCB required (not supplied) Max. thickness: 0.6mm
All dimensions: mm
●Micro B - Component, Cover - through hole HRS No.
Packaging
242-0022-1
4,000 pcs/reel
12.1
8.2 2-0.2
1.1
Part No. ZX20-B-SLDC
●Assembled
8.2 2.6 1.3
2-0.2
1 1.4
5-0.15
6.85
6.85
Assembly (insulator/contacts/lock)
0.6
12.2
1.8
8
Cover
0.6
4.4
1.8
0.35 1.55
8.4
All dimensions: mm
11
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs ●Micro B - Assembly (insulator/contacts/lock) - Right angle SMT Part No.
HRS No.
Packaging
ZX64-B-5S-UNIT(14)
242-0009-3 14
1 piece
Contact HRS for Cable Termination Procedure Manual. 2.6 1.3
16.1
5-0.15
PCB mounting pattern
1.5
6
*PCB required (not supplied) Max. thickness: 1.0mm
7.9
1.3 No.5
2.6
No.1
No.1
3.7
0.35
1.1
0.5
No.5
6.8
All dimensions: mm
●Micro B - Component, Cover-top – Right angle SMT HRS No.
Packaging
ZX64-B-SLDA
242-0013-0
4,000 pcs/reel
24.7
Part No.
6.85
1.8
8
All dimensions: mm
12
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs ●Micro B - Component, Cover-bottom - Right angle SMT HRS No.
Packaging
242-0049-8
4,000 pcs/reel
18.25
Part No. ZX64-SLDB
24.7
●Assembled
Assembly (insulator/contacts/lock)
Cover-top
1.8
4.1
6.85 8.4
8
Cover-bottom
All dimensions: mm
●Micro B - Component, Shell/cover – Right angle SMT Part No.
HRS No.
Packaging
ZX64-B-SLDC
242-0018-4
4,000 pcs/reel
6.85
Shell/cover, without cable clamp This shell/cover does not require ZX64-SLDB.
8
16.1
16.1
1.8
●Assembled
4.1
8.4
Assembly (insulator/contacts/lock)
Cover-top
1.8
6.85
Cover-bottom
All dimensions: mm
13
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs ●Micro A - Assembly (insulator/contacts/lock) - Direct wire soldering Part No.
HRS No.
Packaging
ZX40-A-5S-UNIT
242-0010-2
1 piece
12.4
Contact HRS for Cable Termination Procedure Manual.
Contacts
7.9
No.1
4.2
No.5
Insulator body (color grey)
All dimensions: mm
●Micro A - Component, Cover-top - Direct wire soldering HRS No.
Packaging
242-0011-5
4,000 pcs/reel
22.6
Part No. ZX40-A-SLDA
6.85
1.8
8
All dimensions: mm
14
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plugs
16.2
16.2
●Micro A, Micro B - Component, Cover-bottom - Direct wire soldering
8
8
All dimensions: mm
ZX40-SLDB Part No.
HRS No.
ZX40-SLDB
242-0004-0
ZX40-SLDB(3.3)
242-0023-4
ZX40-SLDB(3.3) Packaging 4,000 pcs/reel
Cable dia. Ø3.8 Ø3.3
22.6
●Assembled
6.85 Assembly (insulator/contacts/lock)
Cover-top
1.8
4.75
8.6
Cover-bottom
All dimensions: mm
15
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
■Plug-Vertical, cradle mount, Shell through hole ●Micro B, with lock 6.65
2-0.2
2.6 1.3 5-0.15 No.1
HRS No.
Packaging
ZX80-B-5S
242-0017-1
100 pcs/pks
6
Part No.
0.7
R1.
3.52 2.32 0.37
3.15
No.5
1 1.86
2.78 2.42 1.88
6.85 8.55
2.5 7.1
16.55 20.55
13
1.15
All dimensions: mm
●Micro B, without lock 6.65
2-0.2
2.6 1.3 5-0.15 No.1
HRS No.
Packaging
ZX80-B-5SA
242-0019-7
100 pcs/pks
BPCB mounting pattern Ø2 .2 (H ol
25
. R0 8-
2e)
13
0.5(Through hole) 1.1(Land) 2.6 6.65 16.55
Contact No.5
1.86
.55 0.4 1.3
2.2(Land)
R0
1.6(Through hole)
2.9 2.2
8-
Contact No.1
16
1.15
3.15
0.37
1.1(Land) 0.5(Through hole)
0.7
2.5 7.1
16.55 20.55
1.3(Through hole) 1.9(Land)
Part No.
6 R1.
3.52 2.32 0.37
3.15
No.5
1 1.86
2.78 2.42 1.88
6.85 8.55
All dimensions: mm
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
BPackaging Specifications ●Embossed carrier tape dimensions Unreeling direction
C
D
0.5 Ø1 .5
E
2
3 Ø1
1.75
4
●Reel Dimensions
Unreeling direction
Ø3
A
B
80
Part No. Part No.
ZX62-B-5PA(11) ZX62-AB-5PA(11) ZX62M-B-5P(01) Other
A dimension 24 24 24 16
B dimension 11.5 11.5 11.5 7.5
ZX62-B-5PA(11) ZX62-AB-5PA(11) ZX62M-B-5P(01) Other
D dimension 30.4 30.4 30.4 22.4
E dimension 24.4 24.4 24.4 16.4
BRecommended Temperature Profile - Receptacles ●Using lead-free solder paste
The temperature profile is based on the left conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/ thickness and board size/thickness. Contact your solder paste and equipment manufacturer for specific recommendations.
(ç) 240ç 230çmin
250 200
180ç
150
150ç
100 60S
50
30S
Note 1: Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2: The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals.
BPrecautions 1. Exercise care when handling the connectors. Do not subject them to excessive external forces when mating/un-mating. 2. Mate and un-mate as intended, holding by the overmolded body, in the correct direction. Do not un-mate by pulling on the cable. 3. Some tooling marks may be visible on the surfaces of receptacle (shell/cover). No form/fit or function is affected. 4. Appearance of the surface finishes on the receptacles may vary between production runs. No affect on form, fit or function.
17
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
MEMO :
18
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
19
ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard
USA: HIROSE ELECTRIC (U.S.A.), INC. Headquarters 2688 Westhills Court, Simi Valley, CA 93065-6235 Phone : +1-805-522-7958 Fax : +1-805-522-3217 http://www.hiroseusa.com
USA: HIROSE ELECTRIC (U.S.A.), INC. San Jose Office 3255 Scott Boulevard, Building 7, Suite 101 Santa Clara, CA 95054 Phone : +1-408-253-9640 Fax : +1-408-253-9641 http://www.hiroseusa.com
USA: HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive) 37677 Professional Center Drive, Suite #100C Livonia, MI 48154 Phone : +1-734-542-9963 Fax : +1-734-542-9964 http://www.hiroseusa.com
THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 1101 CC Amsterdam Z-O Phone : +31-20-6557460 Fax : +31-20-6557469 http://www.hiroseeurope.com
GERMANY: HIROSE ELECTRIC EUROPE B.V. German Branch Herzog-Carl-Strasse 4 D-73760 Ostfildern (Scharnhauser Park) Phone : +49-711-4560-02-1 Fax : +49-711-4560-02-299 http://www.hirose.de
GERMANY: HIROSE ELECTRIC EUROPE B.V. Nuernberg Office Muggenhofer Str. 136 90429 Nuernberg Phone : +49-911 32 68 89 63 Fax : +49-911 32 68 89 69 http://www.hirose.de
UNITED KINGDOM: Hirose Electric Europe BV (UK Branch) 4 Newton Court, Kelvin Drive, Knowlhill, Milton Keynes, MK5 8NH Phone : +44-1908 202050 Fax : +44-1908 202058
CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD. 1601, Henderson Metropolitan, NO.300, East Nanjing Road, Huangpu District, Shanghai, China 200001 Phone : +86-21-6391-3355 Fax : +86-21-6391-3335 http://www.hirose-china.com.cn
CHINA: HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH A1001, Ocean International Center, Building 56# East 4th Ring Middle Road, ChaoYang District, Beijing, 100025 Phone : +86-10-5165-9332 Fax : +86-10-5908-1381 http://www.hirose-china.com.cn
CHINA: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, 5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008 Phone : +86-755-8207-0851 Fax : +86-755-8207-0873 http://www.hirose-china.com.cn
HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 1001, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +852-2803-5338 Fax : +852-2591-6560 http://www.hirose-hongkong.com.hk
TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 103 8F, No.87, Zhengzhou Rd., Taipei Phone : +886-2-2555-7377 Fax : +886-2-2555-7350 http://www.hirose-taiwan.com.tw
KOREA: SINGAPORE: INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD Delhi Liaison Office HIROSE KOREA CO., LTD. HIROSE ELECTRIC SINGAPORE PTE. LTD. 1261-10, Jeoungwhang-Dong, Shihung-City, 10 Anson Road #26-1, International Plaza Suite No. 606 5th Floor SB Tower 1A/1 Sector 16 A Filmcity Noida 201301 Uttar Pradesh-India Kyunggi-Do 429-450 079903, Singapore Phone : +91-120-4804917 Phone : +82-31-496-7000,7124 Phone : +65-6324-6113 Fax : +91-120-4804949 Fax : +82-31-496-7100 Fax : +65-6324-6123 http://www.hirose-singapore.com.sg http://www.hirose.com/sg/ http://www.hirose.co.kr INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. Bangalore Liaison office Unit No.03, Ground Floor, Explorer Building International Tech Park Whitefield Road, Bangalore 560066 Karnataka, India Phone : +91-80-4120 1907 Fax : +91-80-4120 9908 http://www.hirose-singapore.com.sg
®
20
MALAYSIA: HIROSE ELECTRIC SINGAPORE PTE. LTD (Representative office) 1-10-07, Suntech @ Penang Cybercity (1164),Lintang Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia. Phone : +604-619-2564 Fax : +604-619-2574 http://www.hirose.com/sg/
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 08/2014. Contents are subject to change without notice for the purpose of improvements.