Anchor selector
$QFKRUVHOHFWRU
Ɣ
Ɣ
Ɣ Anchor fastening for high loads e.g. in steel construction and plant construction
HSL-3 heavy duty anchor
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ Fastening heavy loads e.g. from columns, high racks, machines
Ɣ
Fire tested
Shock approval
Ɣ
Hollow brick masonry
Ɣ
Solid brick masonry
Aerated concrete
Ɣ
Lightweight concrete
Ɣ
Uncracked concrete
HDA-T/ -TR/TF/-P/-PR/-PF undercut anchor
Cracked concrete
Fatigue approval or test report
Application
Seismic approval
Approvals European Technical Approval
Base material 3UHVWUHVVHGFRQFUHWHKROORZGHFN
Anchor type
Mechanical anchor systems Heavy duty anchors
HSL-GR heavy duty anchor
Fastening heavy loads
Medium and light duty anchors HSC-A(R) /-I(R) safety anchor
Ɣ
Ɣ
Ɣ
HST/-R/-HCR stud anchor
Ɣ
Ɣ
Ɣ
HSA/-R/-R2/-F stud anchor
Ɣ
Ɣ
HSV stud anchor
Ɣ
HLC sleeve anchor
Ɣ
Ɣ = very suitable
8
Ɣ
ż = may be suitable per application
Ɣ
Ɣ
Ɣ
Ɣ Safety relevant fastening at facades and ceilings where short embedment depth is required Ɣ Fastening through in place parts e.g. angles, tracks, channels, wooden beams, etc. Ɣ Fastening through in place parts like wooden beams, metal sections, columns, brackets, etc. Fastening through in place parts Ɣ Temporary fastenings in concrete (e.g. formwork), fastening in base material of low density
Ɣ = technical report
1) redundant fastening
09 / 2012
Anchor selector
Integrated plastic section to telescope and pull down tightly The bolt can be retorqued
Drill bit dia.: 12 – 32 mm Anchor size: M8 – M24 Drill bit dia.: 12 – 28 mm Anchor size: M8 – M20
Ɣ
Drill bit dia.: 14 – 20 mm Anchor size: M6 – M12 Drill bit dia.: 8 – 24 mm Anchor size: M8 – M24
Ɣ
Ɣ
Ɣ
Ɣ
Drill bit dia.: 6 – 20 mm Anchor size: M8 – M24 Drill bit dia.: 8 – 16 mm Anchor size: M8 – M16 Drill bit dia.: 6,5 – 20 mm Anchor size: M5 – M16
Ɣ
Integrated plastic section to telescope and pull down tightly The bolt can be retorqued
Automatic undercutting Small edge distances and spacings Small setting depth Quick and simple setting operation Setting mark Safety wedge for certain follow up expansion Three setting depths Setting mark Extremely ductile steel for high bending capacity Quick and simple setting operation
Short setting and removing operation Good loads in green concrete Bridging of gaps
09 / 2012
Ɣ
Through-fastening
Ɣ
Page
Pre-setting
Ɣ
Internal thread
Ɣ
Setting
External thread
Drill bit dia.: 20 – 37 mm Anchor size: M10 – M20
Stainless steel A4 (1.4401)
Automatic undercutting High load capacity Approved for all dynamic loads
Stainless steel A2 (1.4303)
HCR steel (1.4529)
Specification 6WHHOVKHUDGLVHGKRWGLSSHGJDOY.
Drill bit diameter resp. anchor size
Steel, galvanised
Advantages
Ɣ
Ɣ
72
Ɣ
88
Ɣ
Ɣ
100
Ɣ
Ɣ
110
Ɣ
Ɣ
Ɣ
130
Ɣ
Ɣ
Ɣ
140
Ɣ
Ɣ
Ɣ
Ɣ
158
Ɣ
Ɣ
Ɣ
Ɣ
168
Ɣ
Ɣ
Ɣ
Ɣ
9
Anchor selector
Medium and light duty anchors HAM hard sleeve anchor
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
HUS screw anchor, carbon steel
Ɣ
Ɣ
HUS- 6 screw anchor, redundant fastening
Ɣ Ɣ 1)
HUS 6 / HUS-S 6 screw anchor
Ɣ Ɣ 1)
HKD push-in anchor
Ɣ Ɣ 1)
HKV push-in anchor
Ɣ
HUD-1 universal anchor
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
HUD-L universal anchor
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
10
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Fire tested
Shock approval
Fatigue approval or test report
Application
Secure fastenings in various base materials
Ɣ Fastening channels, brackets, racks, seating
Ɣ
Ɣ Fastening channels, brackets, racks, seating
Ɣ Ɣ
Ɣ Fastening channels, brackets, racks, seating
Ɣ
Ɣ Fastening light channels, brackets, interior panelling or cladding
Ɣ
Ɣ Fastening with threaded rods for pipe suspensions, air ducts, suspended ceilings Fastening with threaded rods for pipe suspensions, air ducts, suspended ceilings Various applications
ż = may be suitable per application
Seismic approval
European Technical Approval
Ɣ
HUS-HR screw anchor, stainless steel
Ɣ = very suitable
Approval 3UHVWUHVVHGFRQFUHWHKROORZGHFN
Hollow brick masonry
Solid brick masonry
Aerated concrete
Lightweight concrete
Uncracked concrete
Base material
Cracked concrete
Anchor type
Various applications
Ɣ = technical report
1) redundant fastening 09 / 2012
Anchor selector
Drill bit dia.: 12 – 20 mm Thread: M6 – M12
Screw driven straight into base material Forged on washer Matched system of screw anchor and screw driver Screw driven straight into base material Forged on washer Matched system of screw anchor and screw driver Screw driven straight into base material Forged on washer Matched system of screw anchor and screw driver
Drill bit dia.: 6 – 14 mm
Screw driven straight into base material Small drill bit diameter Matched system of screw anchor and screw driver Visual verification of full expansion Small setting depth Visual verification of full expansion Small setting depth Fast setting Flexibility of screw length An anchor for every base material Fast setting Flexibility of screw length An anchor for every base material
09 / 2012
Ɣ
Ɣ
Drill bit dia.: 6 mm
Ɣ
Drill bit dia.: 6 mm
Ɣ
Drill bit dia.: 8 – 25 mm Anchor size: M6 – M20 Drill bit dia.: 8 – 20 mm Anchor size: M6 – M16 Drill bit dia.: 5 – 14 mm
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Page
Through-fastening
External thread
HCR steel (1.4529)
Ɣ
Ɣ
Drill bit dia.: 8 – 14 mm
Drill bit dia.: 6 – 10 mm
Stainless steel A4 (1.4401)
Ɣ
Pre-setting
Wings to prevent spinning in the bore hole Plastic cap in cone to prevent dust entrance
Setting
Internal thread
Stainless steel A2 (1.4303)
Specification 6WHHOVKHUDGLVHGKRWGLSSHGJDOY.
Drill bit diameter resp. anchor size
Steel, galvanised
Advantages
174
Ɣ
176
Ɣ
192
Ɣ
216
Ɣ
222
Ɣ
Ɣ
228
Ɣ
Ɣ
250
Ɣ
Ɣ
254
Ɣ
Ɣ
260
11
Anchor selector
HRD-U/-S frame anchor
Ɣ
Ɣ
Ɣ Ɣ 1)
HRD frame anchor
Ɣ
HPS-1 impact anchor
ż
Ɣ
Fatigue approval or test report
European Technical Approval
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Fastening wood battens, components for electrical and plumbing installations
Ɣ
Fastening battens, channels panels
HHD-S cavity anchor
Fire tested
Ɣ
Shock approval
ż
Seismic approval
Ɣ
Solid brick masonry
Aerated concrete Ɣ
Application
3UHVWUHVVHGFRQFUHWHKROORZGHFN
Ɣ
Approvals
Hollow brick masonry
Medium and light duty anchors HLD light duty anchor
Lightweight concrete
Uncracked concrete
Base material
Cracked concrete
Anchor type
Fastenings to weak material with cavities
Ɣ
Ɣ Securing support frames, timber frames, fascade panels, curtain walling
Ɣ
Ɣ On most hollow and solid base material
Ɣ
HCA coil anchor
Temporary external fastenings
HSP/HFPdrywall plug
Fastenings in dry walls
HA8 ring/ hook anchor
Ɣ Ɣ 1)
Ɣ
Ɣ For suspended ceilings and other items from concrete ceilings
DBZ wedge anchor
Ɣ Ɣ 1)
Ɣ
Ɣ Suspension from concrete ceilings e.g. using steel straps, punched band, Nonius system hanger Fastening door and window frames
HT metal frame anchor
Ɣ = very suitable
12
Ɣ
Ɣ
Ɣ
Ɣ
ż = may be suitable per application
Ɣ
Ɣ = technical report
1) redundant fastening
09 / 2012
Anchor selector
Page
Through-fastening
Pre-setting
Internal thread
Setting
External thread
HCR steel (1.4529)
Stainless steel A4 (1.4401)
Stainless steel A2 (1.4303)
Specification 6WHHOVKHUDGLVHGKRWGLSSHGJDOY.
Drill bit diameter resp. anchor size
Steel, galvanised
Advantages
Flexibility of screw length Resilient toggling action to suit every base material
Drill bit dia.: 10 mm
Preassembled with screw Screw of steel strength 5.8 or stainless steel A4 (1.4401)
Drill bit dia.: 10 and 14 mm
Ɣ
Ɣ
Ɣ
268
impact and temperature resistant high quality plastic
Drill bit dia.: 8 – 10 mm
Ɣ
Ɣ
Ɣ
274
impact and temperature resistant high quality plastic
4 – 8 mm
Ɣ
Ɣ
292
Controlled setting Deliverable with or without prefitted screw
Drill bit dia.: 8 – 12 mm
Ɣ
Re-usable Removable
Drill bit dia.: 16 mm
Self-drilling tip One bit for anchor and screw Removable
-
Quick and easy setting Automatic follow up expansion
Drill bit dia.: 8 mm
Ɣ
Small drill bit diameter Quick setting by impact extension Automatic follow up expansion No risk of distortion or forces of constraint Expansion cone can not be lost
Drill bit dia.: 6 mm
Ɣ
Ɣ
306
Drill bit dia.: 8 – 10 mm
Ɣ
Ɣ
310
09 / 2012
Ɣ
Ɣ
Ɣ
264
Ɣ
296
298
Ɣ
300
Ɣ
302
13
Anchor selector
Medium and light duty anchors HK ceiling anchor
Ɣ Ɣ 1)
Ɣ Ɣ
HPD aerated concrete anchor
Application
Fire tested
Shock approval
Fatigue approval or test report
Seismic approval
European Technical Approval
Approvals 3UHVWUHVVHGFRQFUHWHKROORZGHFN
Hollow brick masonry
Solid brick masonry
Aerated concrete
Lightweight concrete
Uncracked concrete
Base material
Cracked concrete
Anchor type
Ɣ Fastening of suspended ceilings, cable trays, pipes Ɣ Various fastenings
Ɣ
HKH hollow deck anchor
Ɣ
HTB
Ɣ
Ɣ Suspension from prestressed concrete hollow decks
Ɣ
Ingenious and strong for hollow base materials
Insulation fasteners IDP insulation fastener
Ɣ
Ɣ
Ɣ
Ɣ
Fastening of hard, self supporting insulating materials
IZ expandable insulation fastener
Ɣ
Ɣ
Ɣ
Ɣ
Fastening of soft and hard, self supporting insulating materials
IDMS / IDMR insulation fastener
Ɣ
Ɣ
Ɣ
Ɣ
Fastening of soft and hard, self supporting insulating materials and non self supporting insulation materials
Ɣ = very suitable
14
ż = may be suitable per application
Ɣ = technical report
1) redundant fastening
09 / 2012
Anchor selector
Small bore hole Quick and easy setting
Approved (DIBt) Fire resistance Immediately loadable
Approval for single point fastenings Approved for sprinkler systems
Load carried by strong metal channel and screw Convincing simplicity when setting
One piece element Corrosion resistant No heat bridge
Corrosion resistant No heat bridge Reliable bonding of plaster
One piece element Corrosion resistant Fire resistant
09 / 2012
Drill bit dia.: 6 mm M6 Without predrilling Thread: M6 – M10 Drill bit dia.: 10 – 14 mm Thread: M6 – M10 Drill bit dia.: 13 – 14 mm
Page
Through-fastening
Pre-setting
Internal thread
External thread
HCR steel (1.4529)
Setting
Ɣ
Ɣ
Ɣ
314
Ɣ
Ɣ
Ɣ
320
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Drill bit dia.: 8 mm insulating material thickness 10 – 150mm Drill bit dia.: 8 mm insulating material thickness up to 180mm
Drill bit dia.: 8 mm insulating material thickness up to 150mm
Stainless steel A4 (1.4401)
Stainless steel A2 (1.4303)
Specification 6WHHOVKHUDGLVHGKRWGLSSHGJDOY.
Drill bit diameter resp. anchor size
Steel, galvanised
Advantages
Ɣ
Ɣ
326
330
Ɣ
334
Ɣ
338
Ɣ
342
15
Anchor selector
Shock approval
Ɣ
Ɣ
Application
Fire tested
Fatigue approval or test report
Seismic approval
European Technical Approval
Approvals 3UHVWUHVVHGFRQFUHWHKROORZGHFN
Hollow brick masonry
Solid brick masonry
Aerated concrete
Lightweight concrete
Uncracked concrete
Base material
Cracked concrete
Anchor type
Adhesive anchor systems Foil capsule systems Ɣ
HVZ adhesive anchor HVU adhesive anchor
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ Adhesive anchor
Ɣ
Ɣ
Ɣ Adhesive anchor in cracked concrete
Heavy-duty fastenings with small spacing and edge distances Ɣ Heavy duty fastenings with small spacing and edge distances
Injection mortar systems Ɣ
HIT-RE 500–SD
HIT-RE 500
HIT-HY 200
Ɣ = very suitable 16
Ɣ
ż = may be suitable per application
Ɣ
Ɣ
Ɣ Adhesive anchor in cracked concrete
Ɣ = technical report
1) redundant fastening 09 / 2012
Anchor selector
Ɣ
Ɣ
Ɣ
HAS M8 – M39 HIS-M8 - M20 Rebar dia. 8 – 40 mm
Ɣ
Ɣ
Ɣ
Ɣ
No expansion pressure Long working time
HIT-V M8 – M30 HIS-M8 - M20 Rebar dia. 8 – 32 mm
Ɣ
Ɣ
Ɣ
No expansion pressure Long working time
HIT-V M8 – M39 HIS-M8 - M20 Rebar dia. 8 – 40 mm
Ɣ
Ɣ
No expansion pressure Flexibility in terms of working time No styrene content No plasticizer content Environmental protection due to the minimized packaging
HIT-V M8 – M30 HIS-M8 - M20 Rebar dia. 8 – 32 mm
Ɣ
Ɣ
09 / 2012
Page
Through-fastening
External thread
Ɣ
Pre-setting
HCR steel (1.4529)
M10 – M20
No expansion pressure Small edge distances and spacing A strong and flexible foil capsule No expansion pressure Small edge distances and spacing A strong and flexible foil capsule
Steel, galvanised
Stainless steel A4 (1.4401)
Setting
Internal thread
Specification Stainless steel A2 (1.4303)
Drill bit diameter resp. anchor size
6WHHOVKHUDGLVHGKRWGLSSHGJDOY.
Advantages
Ɣ
348
Ɣ
Ɣ
360
Ɣ
Ɣ
Ɣ
380
Ɣ
Ɣ
Ɣ
Ɣ
422
Ɣ
Ɣ
Ɣ
Ɣ
488
17
Anchor selector
Application
Fire tested
Shock approval
Fatigue approval or test report
Seismic approval
European Technical Approval
Approvals 3UHVWUHVVHGFRQFUHWHKROORZGHFN
Ɣ
Hollow brick masonry
Ɣ
Solid brick masonry
Lightweight concrete
Ɣ
Aerated concrete
Uncracked concrete
Base material
Cracked concrete
Anchor type
Injection mortar systems HIT-HY 150 MAX
Ɣ
HIT-CT 1
Ɣ
Adhesive anchor in cracked concrete
Ɣ
Hilti Clean technology adhesive anchor
HIT-HY 150
Ɣ
HIT ICE
Ɣ
HIT-HY 70
Ɣ
Ɣ
Ɣ Adhesive anchor
Adhesive anchor for low installation temperatures
Ɣ
Ɣ
Ɣ Universal mortar for solid and hollow brick
Ɣ = very suitable 18
ż = may be suitable per application
Ɣ = technical report
1) redundant fastening 09 / 2012
Anchor selector
External thread
Internal thread
Pre-setting
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
No expansion pressure No styrene content No plasticizer content Environmental protection due to the minimized packaging
HIT-V M8 – M30 HIS-M8 - M20 Rebar dia. 8 – 25 mm
No expansion pressure Environmentaly and user friendly: clean of critical hazardous substances
HIT-V M8 – M24
No expansion pressure No styrene content No plasticizer content Environmental protection due to the minimized packaging
HIT-V M8 – M30 HIS-M8 - M20 Rebar dia. 8 – 25 mm
Ɣ
Ɣ
Ɣ
Ɣ
No expansion pressure
HAS M8 – M24 HIS-M8 - M20 Rebar dia. 8 – 25 mm
Ɣ
Ɣ
Ɣ
Ɣ
No expansion pressure mortar filling control with HIT-SC sleeves
Drill bit dia.: 10 – 22 mm Thread: M6 – M12
Ɣ
Ɣ
Ɣ
Ɣ
09 / 2012
Ɣ
Page
Through-fastening
HCR steel (1.4529)
Setting
Stainless steel A4 (1.4401)
Stainless steel A2 (1.4303)
Specification 6WHHOVKHUDGLVHGKRWGLSSHGJDOY.
Drill bit diameter resp. anchor size
Steel, galvanised
Advantages
558
614
Ɣ
Ɣ
630
Ɣ
672
Ɣ
706
19
