Materialographic Consumables Catalogue. Ensuring certainty

Materialographic Consumables Catalogue Struers A/S Pederstrupvej 84 DK-2750 Ballerup, Denmark Phone +45 44 600 800 Fax +45 44 600 801 [email protected]
12 downloads 0 Views 5MB Size
Materialographic Consumables Catalogue

Struers A/S Pederstrupvej 84 DK-2750 Ballerup, Denmark Phone +45 44 600 800 Fax +45 44 600 801 [email protected] www.struers.com

2012 Australia & New Zealand Struers Australia 27 Mayneview Street Milton QLD 4064 Australia Phone: +61 7 3512 9600 Fax: +61 7 3369 8200 [email protected] BELGIQUE (Wallonie) Struers S.A.S. 370, rue du Marché Rollay F- 94507 Champigny sur Marne Cedex Téléphone +33 1 5509 1430 Télécopie +33 1 5509 1449 [email protected] BELGIUM (Flanders) Struers GmbH Nederland Elektraweg 5 NL-3144 CB Maassluis Telefoon: +31 (10) 599 7209 Fax: +31 (10) 5997201 [email protected] CANADA Struers Ltd. 7275 West Credit Avenue Mississauga, Ontario L5N 5M9 Phone +1 905-814-8855 Fax +1 905-814-1440 [email protected]

CZECH REPUBLIC Struers GmbH Organizační složka Havlíčkova 361 CZ-252 63 Roztoky u Prahy Phone +420 233 312 625 Fax: +420 233 312 640 [email protected]

FRANCE Struers S.A.S. 370, rue du Marché Rollay F-94507 Champigny sur Marne Cedex Téléphone +33 1 5509 1430 Télécopie +33 1 5509 1449 [email protected] IRELAND Struers Ltd. Unit 11 [email protected] AMP Whittle Way Catcliffe Rotherham S60 5BL Tel: +44 0845 604 6664 Fax: +44 0845 604 6651 [email protected] ITALY Struers Italia Via Monte Grappa 80/4 20020 Arese (MI) Tel. +39-02/38236281 Fax +39-02/38236274 [email protected] JAPAN Marumoto Struers K.K. Takara 3rd Building 18-6, Higashi Ueno 1-chome Taito-ku, Tokyo 110-0015 Phone +81 3 5688 2914 Fax +81 3 5688 2927 [email protected] NETHERLANDS Struers GmbH Nederland Elektraweg 5 NL-3144 CB Maassluis Telefoon: +31 (10) 599 7209 Fax: +31 (10) 5997201 [email protected]

ÖSTERREICH Struers GmbH Zweigniederlassung Österreich Ginzkeyplatz 10 A-5020 Salzburg Telefon +43 662 625 711 Fax +43 662 625 711 78 [email protected] POLAND Struers Sp. z o.o. Oddział w Polsce ul. Jasnogórska 44 31-358 Kraków Phone +48 12 661 20 60 Fax +48 12 626 01 46 [email protected] ROMANIA Struers GmbH Sucursala Sibiu Str. Scoala de Inot, nr. 18 RO-550005 Sibiu Phone +40 269 244 558 Fax +40 269 244 559 [email protected]

SWEDEN Struers Sverige Ekbacksvägen 22 168 69 Bromma Tel. +46 (0)8 447 53 90 Fax +46 (0)8 447 53 99 [email protected] UNITED KINGDOM Struers Ltd. Unit 11 Evolution @ AMP Whittle Way Catcliffe Rotherham S60 5BL Tel: +44 0845 604 6664 Fax: +440845 604 6651 [email protected]

Ensuring certainty

USA Struers Inc. 24766 Detroit Road Westlake, OH 44145-1598 Phone +1 440 871 0071 Fax +1 440 871 8188 [email protected]

SCHWEIZ Struers GmbH Zweigniederlassung Schweiz Weissenbrunnenstraße 41 CH-8903 Birmensdorf Telefon +41 44 777 63 07 Fax +41 44 777 63 09 [email protected] SINGAPORE Struers Singapore 627A Aljunied Road, #07-08 BizTech Centre Singapore 389842 Phone +65 6299 2268 Fax +65 6299 2661 [email protected] SUOMI Struers A/S, Sivuliike Suomessa Kalevankatu 43 00180 Helsinki Puhelin +358 0207 919 430 Faksi +358 0207 919 431 [email protected]

62145212 · Printed in Denmark by Rosendahls

CHINA Struers Ltd. Rm. 702 Hi-Shanghai No. 970 Dalian Road Shanghai 200092, P.R. China Phone +86 (21) 5228 8811 Fax +86 (21) 5228 8821 [email protected]

DEUTSCHLAND Struers GmbH Carl-Friedrich-Benz-Straße 5 D- 47877 Willich Telefon +49 (0) 2154 486-0 Fax +49 (0) 2154 486-222 [email protected]

New Products from Struers Tegramin-20 The Tegramin machines represent a powerful preparation system for high quality specimen preparation. They elegantly combine ease of use with advanced functionality. lnnovative solutions improve preparation results and help you deal with a variety of specimens or materials, or high specimen volume. The all new Tegramin-20 completes the Tegramin series that now comprises of machines for 200 mm, 250 mm and 300 mm dia grinding and polishing discs. Tegramin-20 has the capability of preparing up to 4 x 40 mm dia specimens and has the same advanced functions and user friednliness as the larger machines in the Tegramin series.

DiaDuo-2 diamond suspension and cooling lubricant DiaDuo-2 is an all-purpose, two-in-one suspension containing both diamonds and lubricant, for materialographic fine grinding and polishing. With DiaDuo-2 is it easier to prepare materialographic specimens. You only have to apply DiaDuo-2 to the correct level of lubrication and you will never overdose the amount of diamonds. The relation between diamonds and lubricant is always the same regardless of dosage. DiaDuo-2 has the following features: - Water-based - no solvents - Contains monocrystalline diamonds for routine examinations - Stable formulation that does not settle - Easy to clean after preparation - Colour-coded - Can be used in automatic dosing systems and in drip lubricators Ensures reproducible results and cost-effective preparations.

Ease and Clever Workflow with Scentis Scentis is a lab management system developed specifically for materialographic laboratories. Use Scentis to acquire images, collect associated data, measure and analyse. Use Scentis to archive and manage your data and extract knowledge – from desktop to enterprise level. Imagine a working day where all your lab data is collected in one place and logically organised, and where reports are generated automatically and results are instantly shared with your colleagues. Scentis offers a range of optional image analysis modules, e.g. Multiple phase percent area, Grain sizing, Inclusions, Particle Size, Thickness, Graphite in cast iron, Dendritic arm/cell spacing etc. All modules provides simple step-by-step assistance through the entire process Read more about Scentis on www.scentis.com

Hexamatic Entirely new design of a fully automatic preparation system With the Hexamatic we have brought fully automatic specimen preparation to a new level. Hexamatic is equipped with a conveyor with space for eight specimen holders or specimen mover plates, it features a high-Speed plane grinding tation for grinding stones or diamond grinding discs, a second preparation station with eight interchangeable MD-Consumables, and two cleaning stations. The use of both specimen holders for fixed specimens and specimen mover plates for the preparation of individual specimens makes Hexamatic the most versatile automatic preparation system on the market. Together with the nine different possible preparation steps, Hexamatic can be used both for the high capacity preparation of similar materials as well as for the preparation of various materials, where the preparation methods are changing all the time.

Non-destructive testing TransPol-5 Portable grinding and polishing equipment for rugged use TransPol-5 is a portable, metallographic grinding/ polishing machine built to withstand rugged field conditions. MoviPol-5 Electrolytic polishing and etching in the field MoviPol-5 is a portable electrolytic metal polishing and etching machine. It is compact and robust and can be used anywhere. Portable field microscopes The PSM-5 and PSM-10 are compact and portable microscopes for use in the field. PSM-5 provides up to 400x magnification, and PSM-10 up to 600x. Both are ideal for examination of prepared surfaces provided by TransPol-5 and Movipol-5.

MD-Piano 500/1200 MD-Piano 500/1200 is used for Fine Grinding. MD-Piano 500 will reduce grinding time when grinding larger specimens. A specimen finished on MD-Piano 500 can be used directly for electrolytic polishing or micro-hardness testing. MD-Piano 1200 can be used instead of MD-Allegro for both manual Fine Grinding and automatic specimen preparation.

DuraVision-250/-350 The DuraVision-250/-350 is designed for fully automatic hardness testing of test series within the entire macro test load range (1-3000 kgf). Based on the intuitive ecos Workflow™ software and motorized XY-table the machine is ideal for case hardness depth measurement of large samples, automatic hardness testing of large welds, automatic Jominy testing or just multiple hardness tests on large samples. The DuraVision-250/-350 is suitable for both test labs and production facilities.

Consumables Catalogue Cutting

Cutting

5

52 52 53

Hardness Testing

55

Indenters 56 Test Blocks 57

Grinding

Mounting 15

Automatic Preparation Non-destructive Testing General Purpose

Mounting

Abrasive Cut-off Wheels 6 Diamond and CBN Cut-off Wheels 10 Saw Blades 12 Cup Wheels 13 Additive 13 Others 13

Accessories 51

Hot Mounting 16 Cold mounting 17 Mounting cups 19 Others 20

24 24 26 26 29

Polishing 31

Miscellaneous 43

Hardness testing

Controlled Material Removal 44 Electrolytes 44 Non-destructive Testing 45 Mineralogy 48 General Purpose 49

Struers continuously strive to make our products as environmental friendly as possible and is a ISO 14001 certified company. We have recently evaluated all Struers consumables with focus on the development (composition of raw materials and design), production, use and disposal. We are pleased to share this evaluation with you as our customer and this year we have marked the most environmental friendly consumables in our product catalogue with our globe & leaf symbol: The evaluation of the environmental impact of our consumables will give you as our customer the opportunity to choose not only according to specifications but also according to the relative environmental impact of our products. In this catalogue you will find the most environmental friendly products within each group of consumables. Please note that the environmental comparison covers Struers products only, and is a relative indication within a product group. If you for example are looking for hot mounting resins you will find the 3 most environmental friendly products identified by the globe & leaf symbol. Or looking for diamond products, you find 5 out of 7 products marked with the globe & leaf symbol.

Accessories

Abrasive Film 32 DP/OP-Polishing Cloths 32 MD-Polishing Cloths 34 36 Diamond Products Lubricants 39 Final Polishing 40

We care about the environment!

Miscellaneous

Grinding Stones MD Plane Grinding Diamond Pads Grinding Paper MD Fine Grinding

Polishing

Grinding 23

Each section of the catalogue gives a short presentation of the environmental impact profile for the product group.

3

1. Go upwards on the y-axis of the overview to the right until you find the hardness value of your material. 2. Move to the right, until you cross the cut-off wheel that fits your application. If you only have one material to cut, find the wheel where your material’s hardness is placed as close to the middle as possible. For two or more materials, see if you can find a wheel that covers the whole hardness range. The bars that fade out at the bottom represent wheels that can be used for lower hardness also. However, this is not a very economical solution, and it should only be used in exceptional cases.

1000

Mounted materials, predominately resin

If the hardness of the material is known, use the table at the top of the page. In the table at the bottom, you will then find the cut-off wheel codes for the specific cutting machines. If the hardness of the material is not known, find a suitable cut-off wheel according to material group in the table below.

1400

More brittle materials

Struers offers a wide variety of wheels, which means that you can select the hardness that optimally balances durability with finish.

HV

More ductile materials

2000

To select the correct cut-off wheel:

700

500

350

250

180

120

3. Find the number (I-XI) of the respective wheel, and see the table below for the code of the correct wheel for your cut-off machine.

Abrasive Bond

80

SiC

Bakelite

Al 2 O 3

Bakelite

CBN

Bakelite

Diamond Bakelite

50

Diamond Metal

20A35

40A43 42A4310 30A35

50A43 52A4310 40A35

20A35

30A35

40A35

20A25

30A30 30A25 33A259

40A30 40A25 46A2512

50A35 56A3512 50A30 54A25 50A2511 56A2512 50A24

10S43

10S43

Axitom/-5 (1,950 rpm)

350 x 2.5 x 32

10S35

20S35

20A35

10S35

30S35

10S30 10S25

20S30 20S25

Application Std. wheel size* (mm) 432 x 3.0 x 32

Exotom/Unitom-2/-5/-50 (2,775 rpm) Unitom/Discotom-50/-60/-65 Discotom-5/-6/Labotom-3

300 x 2.0 x 32 250 x 1.5 x 32

X

XI Plastics and resins, mounted materials

30A43

Cut-off machine Exotom-100/-150

IX

Minerals and ceramics

VIII

Sintered carbides, hard ceramics

VII

Extremely hard ferrous metals

VI

Very hard ferrous metals

V

Hard ferrous metals

IV

Medium hard ferrous metals

III

Medium soft ferrous metals

II Very ductile metals (Ti)

I Non-ferrous soft metals

30

Soft ferrous metals

Diamond Metal electroplated

60A43 62A4310 50A35 56A3512 60A35 66A3512 60A30 60A25 66A2512

B0C411

B0D352

MOD352 E0D36 3

B0C36 6

B0D352 B7D352/15 B0D352 B7D352/15 B0D314 B0D258

MOD352 E0D36 3

B0C36 6 B0C314 B0C257

MOD352 E0D36 3 M0D315 M0D258

E0D315 E0D25

Discotom/Labotom 235 x 1.5 x 22 10S24 20S24 30A24 40A24 60A24 Discoplan-TS 200 x 1.0 x 22 B4D20 M4D20 1) 406 x 1.8 x 32 2) 350 x 1.5 x 32 3) 356 x 1.5 x 32 4) 305 x 1.8 x 32 5) 305 x 1.5 x 32 6) 356 x 1.8 x 32 7) Width = 1.3 8) Width = 1.1 9) Width = 0.8 10) Fibreglass reinforced 11) For hard and ductile materials, Ni-base alloys 12) 3D cut-off wheels 13) Width=0.6 14) Width=0.4 15) For cintered carbides in steel Precision cut-off machine Secotom-1/-10/-15/-50**

Std. wheel size* (mm) 200 x 0.8 x 22

Accutom-5/-50

150 x 0.5 x 12.7

Accutom-2

10S20

10S20

30A20

30A20

50A20

50A20

50A20

B0C20

B0D20

10S15

40A15 30A15 30A13

40A15 30A15 30A13

50A15

50A15

50A15

B0C15

B0D15

125 x 0.5 x 12.7

10S15 SAW13 30A13

50A13

50A13

50A13

B0C13

B0D1313

Minitom

125 x 0.5 x 12.7

M1D1314 M1D1314 B0C1313

B0C1313

B0C1313

B0C1313

B0C1313

B0C1313

B0D1313

Wheels with special sizes

100 x 0.3 x 12.7

These wheels can be used on both Accutom-2,-5,-50 and Secotom-10 for cutting of small specimens where high precision or minimum material loss is required

75 x 0.15 x 12.7

4

*) Diameter x Width x Bore in mm, **) On Secotom-1 only use M0D20 + B0D20

30A13

M0D2013 M1D2013 M0D15 M1D15 M0D1314 M1D1314 M0D1314 M1D1314 M0D10 M1D10 M0D08 M1D08

E1D20 E0D15 SAW13 M1D1314 M1D1314 M1D10 M1D08

Cutting We at Struers are committed to making your cutting as easy, fast and precise as possible. Perfect materialographic cutting requires precision without overheating or material deformation, usually combined with speed. The cut-off machine and cut-off wheel must match the geometries and composition of the specimens. The hardness and ductility of the material influence the choice of cut-off wheel. Intelligent cut-off wheels Struers cut-off wheels have an abrasive density that varies across the wheel radius, with increasing density towards the centre of the wheel. This means that the cutting performance of the wheel remains constant even as it wears into a smaller diameter.

3-D cut-off wheels Struers cut-off wheels with a hexagonal surface are an addition to our standard line of cut-off wheels. The 3-D wheels reduce heat damage with more efficient cooling. In addition the 3-D surface eliminates the problem of cutting debris building up during cutting, which means that the cutting table and the entire cutting chamber stay clean as the small particles are easily washed away. Environmental Impact Profile for cut-off wheels The environmental impact of each individual Struers cut-off wheel has been evaluated and the profiles are found to be comparable to the other cut-off wheels within the same product group. The best choice of cut-off wheel is solely dependent on the dimension, hardness and ductility of the material and the equipment available. The best environmental choice in the additives group is indicated with the globe & leaf symbol.

55

Cutting 432 mm Abrasive Cut-off Wheels Cut-off Wheel 10S43 For cutting of soft, non-ferrous metals (HV 30 - 300). Silicon carbide. Resin bond 40009150

432 mm (17”) dia. x 3.0 mm x 32 mm dia. 5 pcs. Cut-off Wheel 30A43 For cutting of medium soft ferrous metals (< HV 300) and for general applications. Aluminium oxide. Resin bond

40009151

432 mm (17”) dia. x 3.0 mm x 32 mm dia. 5 pcs. Cut-off Wheel 40A43 For cutting of medium hard ferrous metals (HV 300 - 450) and for general applications. Aluminium oxide. Resin bond

40009152

432 mm (17”) dia. x 3.0 mm x 32 mm dia. 5 pcs. Cut-off Wheel 42A43 For cutting of case hardened and medium hard ferrous metals (HV 300 - 700). Fibre-reinforced. Aluminium oxide. Resin bond

40009158

432 mm (17”) dia. x 3.0 mm x 32 mm dia. 5 pcs. Cut-off Wheel 50A43 For cutting of hard ferrous metals (HV 450 - 600). Aluminium oxide. Resin bond

40009153

432 mm (17”) dia. x 3.0 mm x 32 mm dia. 5 pcs. Cut-off Wheel 52A43 For cutting of hard ferrous metals (HV 450 - 600). Fibre-reinforced. Aluminium oxide. Resin bond

40009154

432 mm (17”) dia. x 3.0 mm x 32 mm dia. 5 pcs. Cut-off Wheel 60A43 For cutting of extra hard ferrous metals (> HV 600). Aluminium oxide. Resin bond

40009155

432 mm (17”) dia. x 3.0 mm x 32 mm dia. 5 pcs. Cut-off Wheel 62A43 For cutting of extra hard ferrous metals (> HV 600). Fibre-reinforced. Aluminium oxide. Resin bond

40009156

432 mm (17”) dia. x 3.0 mm x 32 mm dia. 5 pcs. Cut-off Wheel, Hexagonal 66A43 For cutting of extra hard ferrous metals (HV 400 - 800). With 3-D hexagon pattern. Aluminium oxide. Resin bond

40009159

432 mm (17”) dia. x 3.0 mm x 32 mm dia. 5 pcs.

350 mm Abrasive Cut-off Wheels Cut-off Wheel 10S35 For cutting of soft, non-ferrous metals (HV 30 - 300) on Unitom (2.775 rpm) and Axitom (1.950 rpm). Silicon carbide. Resin bond 40009120

350 mm (14”) dia. x 2.5 mm x 32 mm dia. 10 pcs. Cut-off Wheel 20S35 For cutting of very ductile metals (e.g. titanium) (HV 70 - 400) on Axitom (1.950 rpm). Silicon carbide. Resin bond

40009121

350 mm (14”) dia. x 2.5 mm x 32 mm dia. 10 pcs. Cut-off Wheel 30S35 For cutting of very ductile metals (e.g. titanium) (HV 70 - 400) on Unitom (2.775 rpm). Silicon carbide. Resin bond

40009122

6

350 mm (14”) dia. x 2.5 mm x 32 mm dia. 10 pcs.

Cut-off Wheel 20A35

40009123

Cutting

For cutting of soft ferrous metals, steel tubes and small pieces (HV 80 - 400) on Unitom (2.775 rpm) and Axitom (1.950 rpm), and for cutting of medium soft ferrous metals ( HV 500). For Secotom-50/-15/-10, Accutom-50/-5, Accutom-2 and Accutom. Aluminium oxide. Resin bond

40000044

125 mm (5”) dia. x 0.5 mm x 12.7 mm dia. 5 pcs.

Diamond/CBN Cut-off Wheels Diamond Cut-off Wheel M0D35 For cutting of ceramics (> HV 800) and minerals. Metal bond, high concentration 40000077

350 mm (14”) dia. x 1.5 mm x 32 mm dia. Diamond Cut-off Wheel B0D35 For cutting of sintered carbides and ceramics (> HV 800). Resin bond

40000036

350 mm (14”) dia. x 1.5 mm x 32 mm dia.

40000093

Diamond Cut-off Wheel B7D35 For cutting of drilling tools containing steel and sintered carbides. Resin bond. 350 mm (14”) dia. x 1.5 mm x 32 mm dia. Diamond Cut-off Wheel E0D36 For cutting of mounted specimens and components containing resin or plastic. Electroplated

40000082

356 mm (14”) dia. x 1.5 mm x 32 mm dia. Diamond Cut-off Wheel M0D31 For cutting of ceramics (> HV 800) and minerals. Metal bond, high concentration

40000075

305 mm (12”) dia. x 1.5 mm x 32 mm dia. Diamond Cut-off Wheel B0D31 For cutting of sintered carbides and ceramics (> HV 800). Resin bond

40000035

305 mm (12”) dia. x 1.8 mm x 32 mm dia. Diamond Cut-off Wheel E0D30 For cutting of mounted specimens and components containing resin or plastic. Electroplated

40000081

300 mm (12”) dia. x 1.5 mm x 32 mm dia. Diamond Cut-off Wheel M0D25 For cutting of ceramics (> HV 800) and minerals. Metal bond, high concentration

40000034

250 mm (10”) dia. x 1.1 mm x 32 mm dia. Diamond Cut-off Wheel B0D25 For cutting of sintered carbides and ceramics (> HV 800). Resin bond

40000033

252 mm (10”) dia. x 1.1 mm x 32 mm dia. Diamond Cut-off Wheel E0D25 For cutting of mounted specimens and components containing resin or plastic. Electroplated

10

40000080

250 mm (10”) dia. x 1.5 mm x 32 mm dia. Diamond Cut-off Wheel M4D20

Cutting

For manual cutting of minerals and composites with hard phases. For Discoplan-TS, manual cutting table on Secotom-10 or Secotom-1. Metal bond, high concentration 40000029

202 mm (8”) dia. x 1.0 mm x 22 mm dia. Diamond Cut-off Wheel B4D20 For manual cutting of sintered carbides and ceramics (> HV 800). For Discoplan-TS. Resin bond

40000032

202 mm (8”) dia. x 1.1 mm x 22 mm dia. CBN Cut-off Wheel B0C41 For cutting of extremely hard ferrous metals (HV 500 - 1400). Resin bond, high concentration

40000079

406 mm (16”) dia. x 1.8 mm x 32 mm dia. CBN Cut-off Wheel B0C35 For cutting of extremely hard ferrous metals (HV 500 - 1400). Resin bond, high concentration

40000078

350 mm (14”) dia. x 1.8 mm x 32 mm dia. CBN Cut-off Wheel B0C31 For cutting of extremely hard ferrous metals (HV 500 - 1400). Resin bond, high concentration

40000076

305 mm (12”) dia. x 1.8 mm x 32 mm dia. CBN Cut-off Wheel B0C25 For cutting of extremely hard ferrous metals (HV 500 - 1400). Resin bond, high concentration

40000018

252 mm (10”) dia. x 1.3 mm x 32 mm dia.

Diamond/CBN Precision Cut-off Wheels Diamond Cut-off Wheel M0D20 For cutting of ceramics and minerals (> HV 800). Can be used with manual cutting table. For Secotom-50/-15/-10 and Secotom-1. Metal bond, high concentration 40000084

203 mm (8”) dia. x 0.6 mm x 22 mm dia. Diamond Cut-off Wheel M1D20 For cutting of hard and brittle materials. Can be used with manual cutting table. For Secotom-50/-15/-10 and Secotom-1. Metal bond, low concentration

40000072

203 mm (8”) dia. x 0.6 mm x 22 mm dia. Diamond Cut-off Wheel B0D20 For cutting of sintered carbides and ceramics (> HV 800). For Secotom-50/-15/-10. Resin bond

40000083

203 mm (8”) dia. x 0.9 mm x 22 mm dia.

40000090

Diamond Cut-off Wheel E1D20 For cutting of mounted samples and components containing resin or plastic. For Secotom-50/-15/-10. Electroplated, single-layer 200 mm (8”) dia. x 0.8 mm x 22 mm dia. Diamond Cut-off Wheel M4D18 For manual cutting of minerals and composites with hard phases. For Accutom-2 and Accutom. Metal bond, high concentration

40000046

176 mm (7”) dia. x 0.8 mm x 12.7 mm dia. Diamond Cut-off Wheel M0D15 For cutting of ceramics and minerals (> HV 800). For Secotom-50/-15/-10 and Accutom-50/-5. Metal bond, high concentration

40000054

152 mm (6”) dia. x 0.4 mm x 12.7 mm dia. Diamond Cut-off Wheel M1D15 For cutting of hard and brittle materials. For Secotom-50/-15/-10 and Accutom-50/-5. Metal bond, low concentration

40000068

152 mm (6”) dia. x 0.4 mm x 12.7 mm dia. 11

Diamond Cut-off Wheel B0D15 For cutting of sintered carbides and ceramics (> HV 800). For Secotom-50/-15/-10 and Accutom-50/-5. Resin bond 40000055

152 mm (6”) dia. x 0.8 mm x 12.7 mm dia. Diamond Cut-off Wheel E0D15 For cutting of mounted specimens and components containing resin or plastic. For Secotom-50/-15/-10 and Accutom-50/-5. Electroplated, multilayer.

40000089

150 mm (6”) dia. x 0.4 mm x 12.7 mm dia. Diamond Cut-off Wheel M0D13 For cutting of ceramics and minerals (> HV 800). For Secotom-50/-15/-10, Accutom-50/-5, Accutom-2, Accutom and Minitom. Metal bond, high concentration

40000038

127 mm (5”) dia. x 0.4 mm x 12.7 mm dia. Diamond Cut-off Wheel M1D13 For cutting of hard and brittle materials. For Secotom-50/-15/-10, Accutom-50/ -5, Accutom-2, Accutom and Minitom. Metal bond, low concentration

40000071

127 mm (5”) dia. x 0.4 mm x 12.7 mm dia. Diamond Cut-off Wheel B0D13 For cutting of sintered carbides and ceramics (> HV 800). For Secotom-50/ -15/-10, Accutom-50/-5, Accutom-2, Accutom and Minitom. Resin bond

40000039

127 mm (5”) dia. x 0.6 mm x 12.7 mm dia. Diamond Cut-off Wheel M0D10 For precision cutting of ceramics and minerals. For Secotom-50/-15/-10, Accutom-50/-5, Accutom-2, Accutom and Minitom. Metal bond, high concentration

40000043

102 mm (4”) dia. x 0.4 mm x 12.7 mm dia. Diamond Cut-off Wheel M1D10 For cutting of hard and brittle materials. For Secotom-50/-15/-10, Accutom-50/ -5, Accutom-2, Accutom and Minitom. Metal bond, low concentration

40000070

102 mm (4”) dia. x 0.3 mm x 12.7 mm dia. Diamond Cut-off Wheel M0D08 For high precision cutting of very small specimens. Mainly recommended for ceramics and minerals. For Secotom-50/-15/-10, Accutom-50/-5, Accutom-2 and Accutom. Metal bond, high concentration

40000041

76 mm (3”) dia. x 0.15 mm x 12.7 mm dia. Diamond Cut-off Wheel M1D08 For cutting of hard and brittle materials. For Secotom-50/-15/-10, Accutom-50/-5, Accutom-2 and Accutom. Metal bond, low concentration

40000069

76 mm (3”) dia. x 0.15 mm x 12.7 mm dia. CBN Cut-off Wheel B0C20 For cutting of extremely hard ferrous metals (HV 500 - 1400). For Secotom-50/-15/-10. Resin bond, high concentration

40000074

203 mm (8”) dia. x 0.9 mm x 22 mm dia. CBN Cut-off Wheel B0C15 For cutting of extremely hard ferrous metals (HV 500 - 1400). For Secotom-50/-15/-10 and Accutom-50/-5. Resin bond, high concentration

40000073

152 mm (6”) dia. x 0.8 mm x 12.7 mm dia. CBN Cut-off Wheel B0C13 For cutting of extremely hard ferrous metals (HV 500 - 1400). For Secotom-50/-15/-10, Accutom-50/-5, Accutom-2, Accutom and Minitom. Resin bond, high concentration

40000040

127 mm (5”) dia. x 0.6 mm x 12.7 mm dia.

Saw Blades Saw Blade SAW13 Toothed saw blade for cutting of plastics and very soft metals (< HV 100). For Secotom-50/-15/-10 and Accutom-50/-5 40000057 12

125 mm (5”) dia. x 0.6 mm x 12.7 mm dia.

Cup Wheels SiC Cup Wheel 10P13

Cutting

SiC Cup Wheel, for grinding of ductile materials on Accutom-50. Resin bond 40800120

125 µm. 130 mm (5”) dia. Diamond Cup Wheel M0P10 For grinding of hard and brittle materials on Accutom-50. Metal bond

40800082

91 µm. 100 mm (4”) dia. Diamond Cup Wheel B0P10 For grinding of hard and ductile materials on Accutom-50. Resin bond

40800083

40 µm. 100 mm (4”) dia.

Additive Corrozip To protect the machine from corrosion and to improve cutting and cooling qualities. For Recirculation Cooling Unit 49900045

1l

49900046

5l

49900038

Corrozip-LF Low foaming additive to protect the machine from corrosion, and to improve cutting and cooling properties 1l

49900039

5l Cutting Fluid Water free Cutting Fluid for cutting of water-sensitive materials on Accutom-50/-5 or Secotom-50/-15/-10. Special pump tube required on Secotom-15/-50

49900030

5l

49900040

Unitclean For cleaning of Recirculation Cooling Units to stop attack of microorganisms and remove unpleasant odours 1l

Others Filter Paper for Band Filter Unit Replacement filter paper for 90 l band filter unit 30 µm. 05046922

Width: 45 cm. Length: 250 m Bandfilter Paper Bandfilter paper, for use with band filter (057663xx)

05766914

Width: 45 cm. Length: 90 m Paper for Static Filter For use with static filter (05766908)

05766916

For 50 l filter. 100 pcs. For use with static filter (05766907)

05766915

For 100 l filter. 100 pcs. Disposable Liners

49900001

For collecting waste material in recirculation cooling unit (025361xx) with capacity 30 l. 20 pcs.

49900013

For collecting waste material in recirculation cooling unit, capacity 65 l 10 pcs.

49900042

For collecting waste material in 50 tank (05766906). 20 pcs.

49900043

For collecting waste material in 100 tank (05766905). 20 pcs.

13

Selection Guide for Hot mounting Recommended use

Specific properties

Hot mounting resin

Material

Clear mounts. Porous specimens

Clear transparent

ClaroFast

Acrylic resin

Electrolytic polishing

Electrically ConduFast Acrylic resin with conductive iron filler

Good edge-retention for hard materials

With glass filler only IsoFast Low removal rate

Diallylphtalate with glass filler

Excellent edge-retention for hard materials

Very low shrinkage DuroFast Very low removal rate

Epoxy with mineral filler

Excellent edge-retention for Very low shrinkage LevoFast soft to medium hard materials High removal rate

Hot Mounting One of the main focus areas of hot mounting is the application area. To make your choice easier, we have designed a selection guide based on the application area for different types of hot mounting resins.

Melamine with mineral and glass filler

Fast mounting process. SEM examination

Very low shrinkage PolyFast Medium removal rate

Bakelite with carbon filler

Routine examination of soft to medium hard materials. Color coding

Medium shrinkage MultiFast Medium removal rate

Bakelite with wood filler

Serial mounting of uncomplicated specimens

In pellet form Pre-Mount for easy handling

Bakelite with wood filler

Selection of Hot mounting specimens

Selection Guide for Cold Mounting Curing Time Shrinkage

Cold Mounting Resin

Application area / Special features

Contains special aluminium silicate filler for excellent workability. For coated specimens * DuroCit and high edge-retentions and planeness requirements. ClaroCit **

Universal use. Provides extremely clear, transparent specimens (especially when cured under pressure).

** VersoCit-2

Routine examination of soft to medium hard materials.

10-20 min. ** ViaFix

Excellent for filling of microvias and blind vias. Provides clear, transparent specimens (especially when cured under pressure). ViaFix is affected by alcohol. When using diamond products or lubricants containing alcohol, the surface will be affected and the structure of the polymer beads will appear.

Cures in 1½ hours in an oven at 75°C / 167°F. CaldoFix-2 Long pot life. For vacuum impregnation of po- * rous specimens and plasma spray coatings.

1-4 hours * SpeciFix-40

Epoxy with curing time of approx. 3½ hours. Cures in oven or DryBox. For vacuum impregnation of porous specimens and plasma spray coatings. Extremely good adhesion.

SpeciFix-20 *

Curing time approx. 8 hours. Ideal for small specimens. For vacuum impregnation of porous specimens and plasma spray coatings. Extremely good adhesion.

> 4 hours * EpoFix

Curing time approx.12 hours. Epoxy with very low viscosity. Very well suited for vacuum impregnation of porous specimens and plasma spray coatings. Can be used on all types of specimens. Superior penetration of cracks and pores. Excellent adhesion.

* From 1-5 and 1 is best

14

Cold Mounting One of the main focus areas of cold mounting is the curing time. To make your choice easier, we have designed a selection guide based on the curing time for different types of cold mounting resins.

ClaroCit specimen

DuroCit specimens

Mounting Struers mounting consumables are designed to meet every materialographic application. Specimens are embedded in a resin for safer, more convenient handling and to improve the preparation result. Two different mounting techniques are available: hot mounting and cold mounting.

Cold mounting Struers cold mounting resins protect specimens from heat and pressure, while delivering a stable, secure testing specimen, and provide superior results efficiently and consistently.

Hot mounting When the preparation requirements include high preparation quality, uniform size and shape, and short process times, hot mounting is ideal. Hot mounting is carried out using a mounting press in which the specimen is placed in a cylinder together with the appropriate mounting resin.

Environmental Impact Profile for mounting consumables The environmental impact of the mounting consumables has been evaluated. The best environmental choice within the product groups hot mounting resins and cold mounting kits, is indicated with the globe & leaf symbol. The profiles for the mounting cups and other products for mounting are found to be comparable to the other products within the same product group.

1515

Hot Mounting ClaroFast Acrylic hot mounting resin. Transparent. Thermoplastic 40100055

1 kg

40100054

7.5 kg

40100053

25 kg

ConduFast Acrylic hot mounting resin with iron powder filler. Electrically conductive. Thermoplastic 40100039

1 kg

IsoFast Diallylphtalate hot mounting resin with glass fibre filler, for edge-retention and planeness. Thermosetting 40100042

1 kg

40100043

7.5 kg

DuroFast Epoxy hot mounting resin with mineral filler, for edge-retention and planeness of hard materials. Thermosetting 40100044

1 kg

40100045

7.5 kg

LevoFast Melamine hot mounting resin with mineral and glass filler, for edge-retention and planeness of soft to medium hard materials. Thermosetting 40100057

1 kg

40100058

7.5 kg

PolyFast Phenolic hot mounting resin with carbon filler, for fast mounting process and examination in SEM. Thermosetting 40100036

1 kg

40100037

7.5 kg

MultiFast Phenolic hot mounting resin with wood filler, for general use. Black. Thermosetting 40100027

2.5 kg

40100028

7.5 kg

40100029

25 kg

40100063

75 kg

MultiFast Green Phenolic hot mounting resin with wood filler, for colour marking. Thermosetting

16

40100030

2.5 kg

40100031

7.5 kg

MultiFast Red Phenolic hot mounting resin with wood filler, for colour marking. Thermosetting 40100060

2.5 kg

40100061

7.5 kg

40100062

25 kg

Pre-mount

40101001

For cylinder dia. 25 mm (1”), height 16 mm. 10 kg (approx. 1100 pcs.)

40101003

For cylinder dia. 30 mm (1 ¼”), height 16 mm. 10 kg (approx. 760 pcs.)

40101005

For cylinder dia. 40 mm (1 ½”), height 16 mm. 10 kg (approx. 460 pcs.)

Mounting

Phenolic hot mounting resin with wood filler, in tablet form for easy handling. Thermosetting

Others Heat Conductive Paste For effective heat transfer between heating cooling unit and cylinder in (old) hot mounting presses 40300001

20 g AntiStick Mould release agent to avoid sticking of hot mounting resin to the rams of the mounting presses. Stearate powder in applicator

40300043

8g

Cold Mounting EpoFix EpoFix Kit Epoxy cold mounting system curing at room temperature in about 12 hours, with no shrinkage, especially suited for vacuum impregnation. Transparent 40200029

1 l resin, 130 ml hardener and required consumables EpoFix Resin To be mixed with EpoFix Hardener. 1 l resin correspond to 130 ml hardener

40200030

1l EpoFix Hardener To be mixed with EpoFix Resin. 500 ml hardener correspond to 4 l resin

40200031

500 ml

SpeciFix SpeciFix-20 Kit Epoxy cold mounting system curing at room temperature in about 8 hours, with no shrinkage, especially suited for vacuum impregnation. Transparent 40200048

1 l resin, 200 ml curing agent and required consumables SpeciFix-40 Kit Epoxy cold mounting system curing at elevated temperature (40-60 °C) in about 3.5 hours, with very low shrinkage, suitable for vacuum impregnation. Transparent

40200049

1 l resin, 500 ml curing agent and required consumables SpeciFix Resin To be mixed with SpeciFix-20 Curing Agent or SpeciFix-40 Curing Agent

40200051

1l SpeciFix-20 Curing Agent To be mixed with SpeciFix Resin. 500 ml curing agent correspond to 2.5 l resin

40200052

500 ml 17

SpeciFix-40 Curing Agent To be mixed with SpeciFix Resin. 1 l curing agent correspond to 2 l resin 40200053

1l

CaldoFix

40200084

CaldoFix-2 Kit Epoxy cold mounting system, curing within 1½ hours when heated to 75°C / 167°F. Very low shrinkage, suitable for vacuum impregnation. Transparent. 1 l resin, 325 ml hardener and required consumables

40200085

CaldoFix-2 Resin To be mixed with CaldoFix-2 Hardener. 1 l resin correspond to 325 ml hardener. 1l CaldoFix-2 Hardener

40200086

To be mixed with CaldoFix-2 Resin. 500 ml hardener correspond to 1.5 l resin 500 ml

ClaroCit ClaroCit Kit Acrylic cold mounting system for universal use. Provides extremely clear, transparent mounts (especially when cured under pressure) 40200072

800 g powder, 500 ml liquid and required consumables ClaroCit Powder To be mixed with ClaroCit liquid. 3 kg powder correspond to 1.9 l liquid

40200074

3 kg ClaroCit Liquid To be mixed with ClaroCit Powder. 1 l liquid correspond to 1.6 kg powder

40200073

1l

DuroCit DuroCit Kit Acrylic cold mounting system with mineral filler. For excellent edge-retention 40200080

870 g powder, 300 ml liquid and required consumables DuroCit Powder To be mixed with DuroCit Liquid. 3 kg powder correspond to 1 l liquid

40200081

3 kg DuroCit Liquid To be mixed with DuroCit Powder. 1 l liquid correspond to 3 kg powder

40200082

1l

VersoCit-2 VersoCit-2 Kit Acrylic cold mounting system for routine examination of soft to medium hard materials 40200089

750 g powder, 500 ml liquid and required consumables VersoCit-2 Powder To be mixed with VersoCit-2 Liquid. 3 kg powder corresponds to 2 litre liquid

40200090

3 kg VersoCit-2 Liquid To be mixed with VersoCit-2 Powder. 1 litre liquid corresponds to 1.5 kg powder

40200091

18

1l

ViaFix ViaFix Kit Acrylic cold mounting system for filling of microvias and pores. Clearest mount is obtained by using a pressure chamber 40200067

570 g powder, 500 ml liquid and required consumables ViaFix Powder To be mixed with ViaFix Liquid. 2.5 kg powder correspond to 2.3 l liquid

40200068

2.5 kg ViaFix Liquid

Mounting

To be mixed with ViaFix Powder. 1 l liquid correspond to 1.1 kg powder 40200069

1l

Mounting cups FixiForm Two part polypropylene mounting cup for all Struers cold mounting materials. Re-usable 40300085

25 mm / 1” dia. 10 pcs.

40300086

30 mm dia. 10 pcs.

40300087

1¼” dia. 10 pcs.

40300088

1½” dia. 10 pcs.

40300089

40 mm dia. 10 pcs.

40300090

50 mm / 2” dia. 10 pcs.

Flexiform Flexible silicone rubber mounting cup for ClaroCit, DuroCit, VersoCit-2 and ViaFix 40300018

25 mm dia. 5 pcs.

40300019

30 mm dia. 5 pcs.

40300020

1¼” dia. 5 pcs.

40300021

1½” dia. 5 pcs.

40300022

40 mm dia. 5 pcs. Translucent silicone rubber mounting cup for mounting of rectangular specimens. To be used with acrylic cold mounting resins where they can be reused many times. It can also be used with epoxy resins. Mounts fits to specimen holder MAXDI, 02606920

40300082

68 x 37 x 35 mm. 3 pcs.

40300083

90 x 50 x 35 mm. 3 pcs.

40300084

120 x 60 x 45 mm. 2 pcs.

Seriform Two parts polypropylene mounting cup with parallel sides for ClaroCit, DuroCit, VersoCit-2 and ViaFix 40300007

25 mm dia. 10 pcs.

40300008

30 mm dia. 10 pcs.

40300009

40 mm dia. 5 pcs.

19

Others Flangeform Mounting cup with flange. For AccuStop 30 40300012

30 mm dia. 3 pcs. PCB-Coupon Mould

40300023 40300024

Mould for mounting PCB-coupons. Consists of a hard part and a soft part (40300024) Mould for mounting PCB-coupons. Replacement soft part for 40300023 MultiClips Multiple plastic clip for holding up to 5 small and thin specimens when mounting

40300027

50 pcs. Fixation Clips Metal spring clip for holding small and thin specimens when mounting

40300026

6 mm dia. 100 pcs.

40300025

9 mm dia. 100 pcs. Taper Section Angle, Aluminium Aluminium angle for mounting of taper sections

40300070

50 pcs. Taper Section Angle, Copper Copper angle for mounting of taper sections

40300071

50 pcs. Taper Section Angle, Steel Steel angle for mounting of taper sections

40300069

50 pcs. Consumables Kit Disposable consumables for CitoVac

40300080

100 dispensing tubes and one chamber protector

40300030

80 polyethylene tubes, 80 mixing cups, 80 stirrers and 2 rubber plugs

40300032

400 mixing cups and 400 stirrers

For Epovac For mixing of cold mounting systems Mixer for mixing of Epoxy For mixing of epoxy 05696101

1 mixer and 1 disposable propeller Disposable Propeller To be used with Struers Mixer

40300072

20 pcs. AcryDye Dye for colouring of acrylic cold mounting resins: ClaroCit, DuroCit, VersoCit-2 and ViaFix

40300081

Set with 20 ml of each red, blue and yellow dye Disposable Syringes For accurately measuring cold mounting resins and hardeners

20

40300047

5 ml. 100 pcs.

40300048

10 ml. 100 pcs.

40300049

20 ml. 50 pcs.

EpoDye Fluorescent dye to distinguish pores and cracks in the base material when examining the specimen. For use with SpeciFix, EpoFix, ClaroCit and ViaFix. Special filters for microscope required 40300002

20 g Silicone Oil Silicone release agent

40300076

100 ml Wupty

05696901

Tool for pressing mounts out of FixiForm.

Mounting 21

MD-System Grinding Discs – Water Cooled – Selection Guide Description

Recommended Use

Lifetime

MD-Piano 80: Resin bonded diamond disc that provides a surface finish comparable to 80 grit SiC paper.

Plane grinding of hard materials > 150 HV range such as ferrous metals, concrete, ceramics.

Replaces approx. 100 sheets of SiC paper.

MD-Piano 120: Resin bonded diamond disc that provides a surface finish comparable to 120 grit SiC paper.

Plane grinding of hard materials > 150 HV range such as ferrous metals, concrete, ceramics.

Replaces approx. 100 sheets of SiC paper.

MD-Piano 220: Resin bonded diamond disc that provides a surface finish comparable to 220 grit SiC paper.

Plane grinding of hard materials > 150 HV range such as ferrous metals, concrete, ceramics.

Replaces approx. 100 sheets of SiC paper.

MD-Piano 500: Resin bonded diamond disc that provides a surface finish comparable to 500 grit SiC paper.

Fine grinding of hard materials > 150 HV range such as ferrous metals, concrete, ceramics.

Replaces approx. 100 sheets of SiC paper.

MD-Piano 1200: Resin bonded diamond disc that provides a surface finish comparable to 1200 grit SiC paper.

Fine grinding of hard materials > 150 HV range such as ferrous metals, concrete, ceramics.

Replaces approx. 100 sheets of SiC paper.

MD-Forte 120: Nickel bonded diamond disc that provides a surface finish comparable to 120 grit SiC paper.

Grinding of hard materials > 150 HV range such as ferrous metals, concrete, ceramics.

Replaces approx. 100 sheets of SiC paper.

MD-Primo 120: A metal disc with a SiC abrasive surface embedded in a resin bond. It provides a surface finish comparable to 120 grit SiC paper.

Plane grinding soft materials in the 40 - 250 HV range like non-ferrous metals (aluminium, copper, etc.) and soft materials.

Replaces approx. 50 - 60 sheets of SiC paper.

MD-Primo 220: A metal disc with a SiC abrasive surface embedded in a resin bond. It provides a surface finish comparable to 220 grit SiC paper.

Plane grinding soft materials in the 40 - 250 HV range like non-ferrous metals (aluminium, copper, etc.) and soft materials.

Replaces approx. 50 - 60 sheets of SiC paper.

All MD-System Grinding Discs use water for cooling just like SiC paper. They all provide high and consistent material removal rate, and produce exceptionally flat specimens.

MD-Polishing Cloth Selection Guide

22

Cloth

Characteristics

Recommended use

Abrasive range

Resilience

Hardness

MD-Plan

Coated, woven polyester

Fine grinding of soft material Pre-polishing of hard materials

15 - 3 µm

Very low

Hard

MD-Sat

Woven acetate

Fine grinding and polishing of ferrous metals, non- 9 - 1 µm ferrous metals, coatings and plastics

Medium

Hard

MD-Dur

Satin woven natural silk

Fine grinding and polishing of ferrous metals, non- 9 - 1 µm ferrous metals, coatings and plastics

Medium

Hard

MD-Dac

Satin woven acetate

Polishing of all materials

9 - 3 µm

Medium

Hard

MD-Mol

Taffeta woven 100 % wool

Polishing of ferrous and non-ferrous metals and polymers

≤ 3 µm

High

Soft

MD-Plus

Synthetic nap

One step polishing for sintered carbides and steels

≤ 3 µm

High

Soft

MD-Floc

Synthetic nap

Polishing of all materials

≤ 3 µm

Very high

Very soft

MD-Nap

Synthetic short nap

Final polishing of all materials

≤ 1 µm

Very high

Very soft

MD-Chem

Porous neoprene

Final polishing of all materials

High

Soft

Grinding Struers provides a full range of grinding equipment and consumables to cater for the individual preparation requirements of a wide range of materialographic specimen types. Grinding is the first stage in mechanical material removal. Proper grinding removes damaged or deformed surface material while introducing as little new deformation as possible, thus preparing the specimen surface for polishing. The quality of the finished surface is very much dependent upon the equipment and consumables used in the process.

MD-System The advanced MD-System comprises a magnetic supporting disc combined with metal-backed grinding discs and polishing cloths. With MD-System grinding discs you can achieve consistently high material removal rates and maximum flatness, due to uniform removal of hard and soft phases in the specimen. At the same time, you can reduce preparation time and costs significantly. Environmental Impact Profile for grinding consumables The environmental impact of each individual Struers grinding consumable has been evaluated and the profiles are found to be comparable to the other grinding consumables within the same product group. The best choice of grinding consumables is solely dependent on the requirements for the specific material.

2323

Plane Grinding Grinding Stones Grinding Stone PAMST 40800005

Aluminium oxide grinding stone, for plane grinding of metals on Prepamatic and Prepamatic-2. Grit 150. 200 mm (8”) dia. Grinding Stone PLARI Aluminium oxide grinding stone, for plane grinding of metals on Abramin

40800007

Grit 80. 250 mm (10”) dia. Grinding Stone MINAL Aluminium oxide grinding stone, for plane grinding of metals on Miniplan

40800006

Grit 120. 280 mm (11”) dia. Grinding stone 6A36 #150

40800177

Aluminium oxide grinding stone, for plane grinding of very hard steels/steels containing many carbides on AbraPlan and MAPS. Grit 150, 356 mm dia. Grinding Stone 4A36 #150 Aluminium oxide grinding stone, for plane grinding of harder metals (>HV 250) on AbraPlan and MAPS

40800010

Grit 150. 356 mm (14”) dia. Grinding stone 3A36 #150

40800178

Aluminium oxide grinding stone, for plane grinding of nickel-based alloys (turbine blades) and stainless steels on AbraPlan and MAPS. Grit 150, 356 mm dia. Grinding Stone 2S36 #150 Silicon carbide grinding stone, for plane grinding of non-ferrous metals on AbraPlan and MAPS

40800074

Grit 150. 356 mm (14”) dia. Grinding stone 6A27 #150

40800181

Aluminium oxide grinding stone, for plane grinding of very hard steels/steels containing many carbides on Hexamatic. Grit 150, 270 mm dia. Grinding stone 4A27 #150

40800179

Aluminium oxide grinding stone, for plane grinding of metals >HV 250 on Hexamatic. Grit 150, 270 mm dia. Grinding stone 3A27 #150

40800182

Aluminium oxide grinding stone, for plane grinding of nickel- based alloys (turbine blades) and stainless steels on Hexamatic. Grit 150, 270 mm dia. Grinding stone 2S27 #150

40800180

Silicon carbide grinding stone, for plane grinding of non-ferrous metals on Hexamatic. Grit 150, 270 mm dia.

Others Diamond Point 02606901

For dressing tool. For Abraplan. 1 pcs. 8 mm dia.

40800045

For dressing tool. For MAPS, Prepamatic-2, Prepamatic, AbraPlan-10, AbraPlan-20, Miniplan, Abramin and Planopol/Pedemax-2. 1 pcs. 5 mm dia.

02606962

For dressing tool. For AbraPlan-20. 1 pcs. 8 mm dia. Dressing Stick Aluminium oxide stick for truing and opening of diamond and CBN cut-off wheels, diamond grinding discs and the grinding discs in the MD-System.

40800044

1 pcs.

MD Plane Grinding MD-Forte MD-Forte 120 For magnetic fixation on MD-Disc Metal bonded diamond grinding disc for plane grinding of materials HV 150 - 2000. Surface finish comparable to SiC-Paper grit 120. 40800101 24

200 mm (8”) dia.

40800102

250 mm (10”) dia.

40800103

300 mm (12”) dia.

MD-Primo MD-Primo 120 For magnetic fixation on MD-Disc Grinding disc for plane grinding of materials HV 40-250. Surface finish comparable to SiC-Paper grit 120. SiC abrasive embedded in a resin bond. 40800085

200 mm (8”) dia.

40800086

250 mm (10”) dia.

40800087

300 mm (12”) dia.

40800118

350 mm (14”) dia. MD-Primo 220 For magnetic fixation on MD-Disc Grinding disc for plane grinding of materials HV 40-250. Surface finish comparable to SiC-Paper grit 220. SiC abrasive embedded in a resin bond.

40800088

200 mm (8”) dia.

40800089

250 mm (10”) dia.

40800090

300 mm (12”) dia.

Grinding

MD-Piano MD-Piano 80 For magnetic fixation on MD-Disc Resin bonded diamond grinding disc for plane grinding of materials HV 150 - 2000. Surface finish comparable to SiC-Paper grit 80. 40800121

200 mm (8") dia.

40800122

250 mm (10") dia.

40800123

300 mm (12") dia.

40800124

350 mm (14") dia. MD-Piano 120 For magnetic fixation on MD-Disc Resin bonded diamond grinding disc for plane grinding of materials HV 150 - 2000. Surface finish comparable to SiC-Paper grit 120.

40800125

200 mm (8") dia.

40800126

250 mm (10") dia.

40800127

300 mm (12") dia.

40800128

350 mm (14") dia. MD-Piano 220 For magnetic fixation on MD-Disc Resin bonded diamond grinding disc for plane grinding of materials HV 150 - 2000. Surface finish comparable to SiC-Paper grit 220.

40800129

200 mm (8") dia.

40800130

250 mm (10") dia.

40800131

300 mm (12") dia.

40800132

350 mm (14") dia. MD-Piano 500 For magnetic fixation on MD-Disc Resin bonded diamond grinding disc for fine grinding of materials HV 150-2000. Surface finish comparable to SiC-Paper grit 500.

40800133

200 mm (8”) dia.

40800134

250 mm (10”) dia.

40800135

300 mm (12”) dia.

40800136

350 mm (14”) dia. MD-Piano 1200 For magnetic fixation on MD-Disc Resin bonded diamond grinding disc for fine grinding of materials HV 150-2000. Surface finish comparable to SiC-Paper grit 1200.

40800137

200 mm (8”) dia.

40800138

250 mm (10”) dia.

40800139

300 mm (12”) dia.

40800140

350 mm (14”) dia.

25

Diamond Pads 200 mm Diamond Pad Metal bonded diamond grinding pad, for grinding of hard materials. (>HV 600). Self-adhesive 40800028

20 µm. 200 mm (8”) dia.

40800027

40 µm. 200 mm (8”) dia.

40800026

125 µm. 200 mm (8”) dia.

40800025

250 µm. 200 mm (8”) dia.

250 mm Diamond Pad Metal bonded diamond grinding pad, for grinding of hard materials. (>HV 600). Self-adhesive 40800036

20 µm. 250 mm (10”) dia.

40800035

40 µm. 250 mm (10”) dia.

40800034

125 µm. 250 mm (10”) dia.

40800033

250 µm. 250 mm (10”) dia.

300 mm Diamond Pad Metal bonded diamond grinding pad, for grinding of hard materials. (>HV 600). Self-adhesive 40800040

20 µm. 300 mm (12”) dia.

40800039

40 µm. 300 mm (12”) dia.

40800038

125 µm. 300 mm (12”) dia.

40800037

250 µm. 300 mm (12”) dia.

Grinding Paper PG-Paper Zirconia-alumina grinding paper for heavy-duty plane grinding of ferrous metals (HV 150, using diamonds. For magnetic fixation on MD-Disc 40500134

200 mm (8”) dia. 1 pc.

40500065

200 mm (8”) dia. 5 pcs.

40500135

250 mm (10”) dia. 1 pc.

40500066

250 mm (10”) dia. 5 pcs.

40500136

300 mm (12”) dia. 1 pc.

40500067

300 mm (12”) dia. 5 pcs.

40500140

350 mm (14”) dia. 5 pcs.

MD-Largo Maintenance-free composite disc for one-step fine grinding of materials HV 40 - 150, using diamonds. For magnetic fixation on MD-Disc 40500137

200 mm (8”) dia. 1 pc.

40500097

200 mm (8”) dia. 5 pcs.

40500138

250 mm (10”) dia. 1 pc.

40500098

250 mm (10”) dia. 5 pcs.

40500139

300 mm (12”) dia. 1 pc.

40500099

300 mm (12”) dia. 5 pcs.

40500141

350 mm (14”) dia. 5 pcs. 29

Preparation methods overview PG

FG

DP

OP

Surface

SiC Foil (on MD-Gekko)

MD-Largo

MD-Mol

MD-Chem or MD-Nap

Abrasive, Grit/Grain

SiC # 320

DiaPro AllegroLargo

DiaPro Mol

OP-U or OP-S

Surface

MD-Primo 220

MD-Largo

MD-Mol

MD-Chem or MD-Nap

Abrasive, Grit/Grain

SiC

DiaPro AllegroLargo

DiaPro Mol

OP-U or OP-S

Surface

MD-Primo 220

MD-Largo

MD-Dac

MD-Chem or MD-Nap

Abrasive, Grit/Grain

SiC

DiaPro AllegroLargo

DiaPro Dac

OP-U or OP-S

Surface

MD-Piano 220

MD-Allegro

MD-Dac

MD-Chem

Abrasive, Grit/Grain

Diamond

DiaPro AllegroLargo

DiaPro Dac

OP-AA

Surface

MD-Piano 220

MD-Allegro

MD-Dur

MD-Chem MD-Nap

Abrasive, Grit/Grain

Diamond

DiaPro AllegroLargo

DiaPro Dur

OP-U or DiaPro Nap B

Surface

MD-Piano 120

MD-Allegro

MD-Dac

MD-Chem

Abrasive, Grit/Grain

Diamond

DiaPro AllegroLargo

DiaPro Dac

OP-U or OP-S

Surface

MD-Piano 220

MD-Plan

MD-Chem

Abrasive, Grit/Grain

Diamond

DiaPro Plan

OP-U or OP-S

Surface

SiC Foil (on MD-Gekko)

MD-Largo

MD-Mol

Abrasive, Grit/Grain

SiC # 320

DiaPro AllegroLargo

DiaPro Mol

Surface

MD-Piano 220

MD-Allegro

MD-Plus

Abrasive, Grit/Grain

Diamond

DiaPro AllegroLargo

DiaPro Plus

Surface

MD-Piano 120

MD-Allegro

MD-Dac

Abrasive, Grit/Grain

Diamond

DiaPro AllegroLargo

DiaPro Dac

10 Metalog Guide preparation methods Method A Al 99,5 sand cast

Method B Cu pure

Method C Cu 58 Zn 42

Method D Nodular cast iron

Method E White cast iron

Method F WC in Cu matrix

Method G Al2O3

Method X MgAl alloy

Method Y Medium carbon steel

Method Z Sintered carbide with coatings

MD-System Application areas Hardness HV Plane Grinding

30 50 80 120 180 250 350 500 700 1000 1400 2000 MD-Primo MD-Piano MD-Forte

Fine Grinding

MD-Largo MD-Allegro MD-Piano 500 and 1200

Polishing

30

MD-Cloths

Enjoy the Freedom of e-Gate

Team up with the World Leader

Certainty in On-line Services

Certainty in Application Knowledge Struers is committed to providing you with the best services available – and via e-gate we can now support you around the clock. e-Gate will be the new location for all our on-line services:

e-Training

e-Education

e-Metalog

Sign up for our newsletter on www.struers.com/ structurenews

• e-Commerce – convenient on-line ordering as safe as on the phone • e-Education – on-line education programme in materialography • e-Metalog – database containing more than 500 preparation methods • e-Training – on-line training in product installation and operation e-Gate is your unique gate to shopping, education, knowledge and training.

e-Commerce

Do you need to optimise or develop your preparation methods?

www.struers.com

Struers presents new e-commerce opportunities Look forward to the beginning of 2012

Meet our application specialists in our labs or on our website

At Struers we place emphasis on individual application assistance and customer care. All our preparation methods are developed and approved by our experienced metallographers to give you the best possible results and the winning edge. With fifteen application labs world wide and a high number of dedicated sales persons, we perfect customer care every day. We are prepared to answer your questions and assist your lab in developing optimal preparation methods.

www.struers.com

Service, a key element

Struers and the environment

Expect the best

The right choice is easy

Struers recognizes after-sales service as a key element in building customer satisfaction. As a Struers customer, you have invested in the best materialographic equipment available in the market - and you have every right to expect the best service.

CitoPress needs less energy compared to comparable presses

With more than 40 years experience in after-sales service and with Struers companies and distributors in more than 50 countries, we secure high-quality service and worldwide availability. Struers service engineers are well-trained and committed to deliver prompt and timely service. They know your equipment like the back of their hand and take pride in their job. We are serious about service - simply because we know how important it is to you.

DiaPro is water-based and without any solvents

Struers is proud to announce that we are now certified compliant to the ISO 14001 standard for Environmental Management Systems. This registration confirms Struers’ commitment to minimize environmental impact in our day-to-day operations. We will continue focusing on reducing our products’ environmental impact and to be at the forefront with regards to legislation and market demands. Struers is your safe and green choice of supplier for materialographic equipment and consumables: - Our products are developed with environmental impact in mind - Our product program includes environmental friendly alternatives - We develop preparation methods to optimise your consumables consumption - We care for the working environment of our and your employees. Struers - your responsible business partner.

Read more at www.struers.com/service

www.struers.com

Service, a key element

Struers and the environment

Expect the best

The right choice is easy

Struers recognizes after-sales service as a key element in building customer satisfaction. As a Struers customer, you have invested in the best materialographic equipment available in the market - and you have every right to expect the best service.

CitoPress needs less energy compared to comparable presses

With more than 40 years experience in after-sales service and with Struers companies and distributors in more than 50 countries, we secure high-quality service and worldwide availability. Struers service engineers are well-trained and committed to deliver prompt and timely service. They know your equipment like the back of their hand and take pride in their job. We are serious about service - simply because we know how important it is to you.

DiaPro is water-based and without any solvents

Struers is proud to announce that we are now certified compliant to the ISO 14001 standard for Environmental Management Systems. This registration confirms Struers’ commitment to minimize environmental impact in our day-to-day operations. We will continue focusing on reducing our products’ environmental impact and to be at the forefront with regards to legislation and market demands. Struers is your safe and green choice of supplier for materialographic equipment and consumables: - Our products are developed with environmental impact in mind - Our product program includes environmental friendly alternatives - We develop preparation methods to optimise your consumables consumption - We care for the working environment of our and your employees. Struers - your responsible business partner.

Read more at www.struers.com/service

www.struers.com

Enjoy the Freedom of e-Gate

Team up with the World Leader

Certainty in On-line Services

Certainty in Application Knowledge Struers is committed to providing you with the best services available – and via e-gate we can now support you around the clock. e-Gate will be the new location for all our on-line services:

e-Training

e-Education

e-Metalog

Sign up for our newsletter on www.struers.com/ structurenews

• e-Commerce – convenient on-line ordering as safe as on the phone • e-Education – on-line education programme in materialography • e-Metalog – database containing more than 500 preparation methods • e-Training – on-line training in product installation and operation e-Gate is your unique gate to shopping, education, knowledge and training.

e-Commerce

Do you need to optimise or develop your preparation methods?

www.struers.com

Struers presents new e-commerce opportunities Look forward to the beginning of 2012

Meet our application specialists in our labs or on our website

At Struers we place emphasis on individual application assistance and customer care. All our preparation methods are developed and approved by our experienced metallographers to give you the best possible results and the winning edge. With fifteen application labs world wide and a high number of dedicated sales persons, we perfect customer care every day. We are prepared to answer your questions and assist your lab in developing optimal preparation methods.

www.struers.com

Polishing Struers polishing products are made of carefully selected materials. Extensive tests have led to the development of the market’s best equipment and consumables in terms of preparation quality and durability. To remove deformation from grinding and obtain a surface that is highly reflective, the specimens must be polished before they can be examined under the microscope. Polishing is carried out on cloths of differing resilience with different abrasives. Two processes are available: Diamond Polishing and Oxide Polishing.

DiaPro DiaPro is a line of diamond suspensions, specially developed for extra-high performance with Struers grinding and polishing surfaces, which significantly improves your efficiency. Each DiaPro suspension has been developed and optimised for a specific surface, and the results are outstanding. Preparation times are reduced by 30% on average. At the same time, DiaPro delivers outstanding planeness, edge retention and reproducibility. Environmental Impact Profile for polishing consumables The environmental impact of the polishing consumables has been evaluated. The profiles for the DP/OP/MD polishing cloths are found to be comparable to the other polishing cloths within this product group. The best environmental choice of consumables in the product groups diamond products, lubricants and final polishing products are indicated with the globe & leaf symbol. 31 3131

Abrasive Film Diamond Film For polishing with TriPod polishing fixture. Plain back 40400180

0.1 µm. 200 mm (8”) dia. 5 pcs.

40400179

0.5 µm. 200 mm (8”) dia. 5 pcs.

40400178

1 µm. 200 mm (8”) dia. 5 pcs.

40400177

3 µm. 200 mm (8”) dia. 5 pcs.

40400176

6 µm. 200 mm (8”) dia. 5 pcs.

40400175

9 µm. 200 mm (8”) dia. 5 pcs.

40400174

15 µm. 200 mm (8”) dia. 5 pcs.

40400173

30 µm. 200 mm (8”) dia. 5 pcs.

Aluminium Oxide Film For polishing with TriPod polishing fixture. Plain back 40400172

0.05 µm. 200 mm (8”) dia. 50 pcs.

40400171

0.1 µm. 200 mm (8”) dia. 50 pcs.

40400170

0.3 µm. 200 mm (8”) dia. 50 pcs.

40400169

1 µm. 200 mm (8”) dia. 50 pcs.

DP/OP-Polishing Cloths DP-Plan Polishing cloth for fine grinding of soft metals and pre-polishing of hard materials. Coated woven polyester. Self-adhesive 40500200

200 mm (8”) dia. 5 pcs.

40500201

250 mm (10”) dia. 5 pcs.

40500202

300 mm (12”) dia. 5 pcs.

DP-Sat Polishing cloth for fine grinding and polishing of ferrous metals, non-ferrous metals, coatings and plastics. Plain woven acetate. Self-adhesive 40500216

200 mm (8”) dia. 5 pcs.

40500217

250 mm (10”) dia. 5 pcs.

40500218

300 mm (12”) dia. 5 pcs.

DP-Dur Polishing cloth for fine grinding and polishing of ferrous metals, non-ferrous metals, coatings and plastics. Satin woven natural silk. Self-adhesive 40500208

200 mm (8”) dia. 5 pcs.

40500209

250 mm (10”) dia. 5 pcs.

40500210

300 mm (12”) dia. 5 pcs.

DP-Dac Universal polishing cloth for all materials. Satin woven acetate. Self-adhesive 40500212

200 mm (8”) dia. 5 pcs.

40500213

250 mm (10”) dia. 5 pcs.

40500214

300 mm (12”) dia. 5 pcs.

DP-Mol Polishing cloth for polishing of ferrous and non-ferrous metals and polymers. Taffeta woven 100 % wool. Self-adhesive

32

40500220

200 mm (8”) dia. 5 pcs.

40500221

250 mm (10”) dia. 5 pcs.

40500222

300 mm (12”) dia. 5 pcs.

DP-Plus Polishing cloth for one step polishing of sintered carbides and steels. Synthetic nap. Self-adhesive 40500224

200 mm (8”) dia. 5 pcs.

40500225

250 mm (10”) dia. 5 pcs.

40500226

300 mm (12”) dia. 5 pcs.

DP-Floc Polishing cloth for polishing of all materials. Synthetic nap. Self-adhesive 40500228

200 mm (8”) dia. 5 pcs.

40500229

250 mm (10”) dia. 5 pcs.

40500230

300 mm (12”) dia. 5 pcs.

DP-Nap Polishing cloth for final polishing of all materials. Short synthetic nap. Self-adhesive 40500232

200 mm (8”) dia. 5 pcs.

40500233

250 mm (10”) dia. 5 pcs.

40500234

300 mm (12”) dia. 5 pcs.

OP-Felt Polishing cloth for polishing of ferrous and non-ferrous metals. Thick felt. Self-adhesive 200 mm (8”) dia. 5 pcs.

40500301

250 mm (10”) dia. 5 pcs.

40500302

300 mm (12”) dia. 5 pcs.

Polishing

40500300

OP-Nat Polishing cloth for polishing of ferrous metals. Woven wool felt. Self-adhesive 40500304

200 mm (8”) dia. 5 pcs.

40500305

250 mm (10”) dia. 5 pcs.

40500306

300 mm (12”) dia. 5 pcs.

OP-Chem Polishing cloth for final polishing of all materials. Porous neoprene. Selfadhesive 40500308

200 mm (8”) dia. 5 pcs.

40500309

250 mm (10”) dia. 5 pcs.

40500310

300 mm (12”) dia. 5 pcs.

MD-Rondo Adapter disc for application of self-adhesive consumables to MD-Disc. With a dual-adhesion surface for easy fixation and removal of the consumables and anti-slip backing 40503000

200 mm (8”) dia. 5 pcs.

40503001

250 mm (10”) dia. 5 pcs.

40503002

300 mm (12”) dia. 5 pcs.

40503082

350 mm (14”) dia. 5 pcs.

33

MD-Polishing Cloths MD-Plan Polishing cloth for fine grinding of soft metals and pre-polishing of hard materials. Coated woven polyester. For magnetic fixation on MD-Disc 40500086

200 mm (8”) dia. 5 pcs.

40500087

250 mm (10”) dia. 5 pcs.

40500088

300 mm (12”) dia. 5 pcs.

40500147

350 mm (14”) dia. 5 pcs.

MD-Sat Polishing cloth for fine grinding and polishing of ferrous metals, non-ferrous metals, coatings and plastics. Plain woven acetate. For magnetic fixation on MD-Disc 40500406

200 mm (8”) dia. 5 pcs.

40500407

250 mm (10”) dia. 5 pcs.

40500408

300 mm (12”) dia. 5 pcs.

MD-Dur Polishing cloth for fine grinding and polishing of ferrous metals, non-ferrous metals, coatings, plastics. Satin woven natural silk. For magnetic fixation on MD-Disc 40500074

200 mm (8”) dia. 5 pcs.

40500075

250 mm (10”) dia. 5 pcs.

40500076

300 mm (12”) dia. 5 pcs.

40500149

350 mm (14”) dia. 5 pcs.

MD-Dac Universal polishing cloth for all materials. Satin woven acetate. For magnetic fixation on MD-Disc 40500071

200 mm (8”) dia. 5 pcs.

40500095

250 mm (10”) dia. 5 pcs.

40500073

300 mm (12”) dia. 5 pcs.

40500150

350 mm (14”) dia. 5 pcs.

MD-Mol Polishing cloth for polishing of ferrous and non-ferrous metals and polymers. Taffeta woven 100 % wool. For magnetic fixation on MD-Disc 40500077

200 mm (8”) dia. 5 pcs.

40500078

250 mm (10”) dia. 5 pcs.

40500079

300 mm (12”) dia. 5 pcs.

40500152

350 mm (14”) dia. 5 pcs.

MD-Plus Polishing cloth for one step polishing of sintered carbides and steels. Synthetic nap. For magnetic fixation on MD-Disc

34

40500089

200 mm (8”) dia. 5 pcs.

40500090

250 mm (10”) dia. 5 pcs.

40500091

300 mm (12”) dia. 5 pcs.

40500151

350 mm (14”) dia. 5 pcs.

MD-Floc Polishing cloth for polishing of all materials. Synthetic nap. For magnetic fixation on MD-Disc 40500403

200 mm (8”) dia. 5 pcs.

40500404

250 mm (10”) dia. 5 pcs.

40500405

300 mm (12”) dia. 5 pcs.

MD-Nap Polishing cloth for final polishing of all materials. Short synthetic nap. For magnetic fixation on MD-Disc 40500080

200 mm (8”) dia. 5 pcs.

40500081

250 mm (10”) dia. 5 pcs.

40500082

300 mm (12”) dia. 5 pcs.

40500153

350 mm (14”) dia. 5 pcs.

MD-Chem Polishing cloth for final polishing of all materials. Porous neoprene. For magnetic fixation on MD-Disc 40500092

200 mm (8”) dia. 5 pcs.

40500093

250 mm (10”) dia. 5 pcs.

40500094

300 mm (12”) dia. 5 pcs.

40500154

350 mm (14”) dia. 5 pcs.

MD-Mol APS

40500155

300 mm (12") dia. 5 pcs.

40500156

350 mm (14") dia. 5 pcs.

Polishing

Polishing cloth to be used on automatic preparation systems for polishing of ferrous and non-ferrous metals and polymers. Taffeta woven 100 % wool. For magnetic fixation on MD-Disc

35

Diamond Products DP-Suspension P High performance diamond product containing exclusively polycrystalline diamonds. Stable suspension in pump bottle for manual application 40600229

1 µm. 125 ml

40600228

3 µm. 125 ml

40600227

6 µm. 125 ml High performance diamond product containing exclusively polycrystalline diamonds. Stable suspension, designed for automatic dosing machines

40600364

0.1 µm. 500 ml

40600363

¼ µm. 500 ml

40600297

¼ µm. 2.5 l

40600362

1 µm. 500 ml

40600251

1 µm. 2.5 l

40600342

1 µm. 5 l

40600361

3 µm. 500 ml

40600250

3 µm. 2.5 l

40600341

3 µm. 5 l

40600360

6 µm. 500 ml

40600249

6 µm. 2.5 l

40600340

6 µm. 5 l

40600359

9 µm. 500 ml

40600248

9 µm. 2.5 l

40600339

9 µm. 5 l

40600358

15 µm. 500 ml

40600247

15 µm. 2.5 l

DP-Suspension M High performance diamond product containing monocrystalline diamonds. Stable suspension, designed for automatic dosing machines 40600357

1 µm. 500 ml

40600256

1 µm. 2.5 l

40600346

1 µm. 5 l

40600356

3 µm. 500 ml

40600255

3 µm. 2.5 l

40600345

3 µm. 5 l

40600355

6 µm. 500 ml

40600254

6 µm. 2.5 l

40600344

6 µm. 5 l

40600354

9 µm. 500 ml

40600253

9 µm. 2.5 l

40600343

9 µm. 5 l

40600353

15 µm. 500 ml

40600252

15 µm. 2.5 l

DP-Suspension A High performance diamond product containing polycrystalline diamonds. Alcohol based. Water content < 0.5 % w/w. For highest efficiency in materiallographic polishing of water sensitive materials. Stable suspension

36

40600352

¼ µm. 500 ml

40600351

1 µm. 500 ml

High performance diamond product containing polycrystalline diamonds. Alcohol based. Water content < 0.5 % w/w. For highest efficiency in materiallographic fine grinding and polishing of water sensitive materials. Stable suspension 40600350

3 µm. 500 ml High performance diamond product containing M+ diamonds. Alcohol based. Water content < 0.5 % w/w. For highest efficiency in materiallographic fine grinding and polishing of water sensitive materials. Stable suspension

40600349

6 µm. 500 ml

40600348

9 µm. 500 ml

40600347

15 µm. 500 ml

DiaPro DiaPro Allegro/Largo For high-performance materialographic fine grinding on MD-Allegro and MD-Largo. Stable diamond suspension containing a unique mixture of highperformance diamonds and cooling lubricant. Apply DiaPro to achieve the correct level of lubrication. Does not contain solvents 40600270

500 ml

40600289

5l DiaPro Plan For high-performance materialographic fine grinding on MD-Plan and DPPlan. Stable diamond suspension containing a unique mixture of highperformance diamonds and cooling lubricant. Apply DiaPro to achieve the correct level of lubrication. Does not contain solvents 500 ml

40600290

5l

Polishing

40600271

DiaPro Largo For high-performance materialographic polishing on MD-Largo. Stable diamond suspension containing a unique mixture of high-performance diamonds and cooling lubricant. Apply DiaPro to achieve the correct level of lubrication. Does not contain solvents 40600272

500 ml

40600291

5l DiaPro Mol For high-performance materialographic polishing on MD-Mol and DP-Mol. Stable diamond suspension containing a unique mixture of high-performance diamonds and cooling lubricant. Apply DiaPro to achieve the correct level of lubrication. Does not contain solvents

40600273

500 ml

40600292

5l DiaPro Dur For high-performance materialographic polishing on MD-Dur and DP-Dur. Stable diamond suspension containing a unique mixture of high-performance diamonds and cooling lubricant. Apply DiaPro to achieve the correct level of lubrication. Does not contain solvents.

40600274

500 ml

40600293

5l DiaPro Dac For high-performance materialographic polishing on MD-Dac and DP-Dac. Stable diamond suspension containing a unique mixture of high-performance diamonds and cooling lubricant. Apply DiaPro to achieve the correct level of lubrication. Does not contain solvents.

40600275

500 ml

40600294

5l

37

DiaPro Plus For high-performance materialographic polishing on MD-Plus and DP-Plus. Stable diamond suspension containing a unique mixture of high-performance diamonds and cooling lubricant. Apply DiaPro to achieve the correct level of lubrication. Does not contain solvents. 40600276

500 ml

40600295

5l DiaPro Floc For high-performance materialographic polishing on MD-Floc and DP-Floc. Stable diamond suspension containing a unique mixture of high-performance diamonds and cooling lubricant. Apply DiaPro to achieve the correct level of lubrication. Does not contain solvents

40600365

500 ml

40600366

5l DiaPro Nap B For high-performance materialographic polishing of hard materials (>150 HV) on MD-Nap and DP-Nap. Stable diamond suspension containing a unique mixture of high-performance diamonds and cooling lubricant. Apply DiaPro to achieve the correct level of lubrication. Does not contain solvents.

40600277

500 ml

40600296

5l DiaPro Nap R For high-performance materialographic polishing of soft materials (