MARINE STEERING & ENGINE CONTROLS
TELEFLEX HYDRAULIC STEERING KITS “BAYSTAR” OUTBOARD STEERING KIT
“BAYSTAR & SEASTAR” HYDRAULIC FLUID
Part# TELHA5430
Description: Fluid, Quart
HYDRAULIC FLUID FILLER KIT
For Boats rated to a max of 150hp (total), The cylinder utilizes the factory O/B engine supplied drag link for simplified installation, Included Equipment: Helm pump HH4016, cylinder HC4645H, tubing kit (includes two 20’ cut-to-fit hoses), filler kit and two bottles of hydraulic fluid
Part# TELHA5438
Part# Description: TELHK4200A Steering wheel not included, 3/4” tapered shaft
Description: Filling kit
“SEASTAR” OUTBOARD STEERING KIT
“SEASTAR PRO” OUTBOARD STEERING KIT
Use with single outboards up to 300hp and dual outboards up to 600hp total, Speed 0–60mph, turns lock-to-lock 5, Included Equipment Helm, cylinder and bleeder kit, Hoses (H051 series) sold separately (see below)
The choice for high speed single-engine outboards up to 300hp, kit includes a 2.0 PRO HH5770 helm, front mount HC5345 cylinder, two quarts of oil, Compact helm has a 4-7/16” footprint and requires only a 3” cutout, Hoses (H057 series) sold separately (see below)
Part# Description: TELHK6400A Steering wheel not included, 3/4” tapered shaft “SEASTAR” HK6400 FLEXIBLE HOSE Pre-cut lengths, High burst strength, factory installed end fittings, hose I.D. 5/16”, two piece set Part#
Length:
Part#
Length:
TELHO5102
2’
TELHO5118
18’
TELHO5104
4’
TELHO5120
20’
TELHO5106
6’
TELHO5122
22’
TELHO5108
8’
TELHO5124
24’
TELHO5112
12’
TELHO5126
26’
TELHO5114
14’
TELHO5128
28’
TELHO5116
16’
276
Part# Description: TELHK7400A Steering wheel not included, 3/4” tapered shaft “SEASTAR PRO” HK7400 FLEXIBLE HOSE Pre-cut lengths, can be used on all seastar systems except baystar, capilano, & 3 line inboard systems, hose I.D. 5/16”, two piece set Part#
Length:
Part#
Length:
TELHO5702
2’
TELHO5716
16’
TELHO5704
4’
TELHO5718
18’
TELHO5708
8’
TELHO5720
20’
TELHO5714
14’
TELHO5722
22’
Lighthouse Marine Supply I “saving boater’s weekends everywhere”
MARINE STEERING & ENGINE CONTROLS TELEFLEX SEASTAR I, II, BAYSTAR, & HYNAUTIC HYDRAULIC HELMS SEASTAR I, II & BAYSTAR HYDRAULIC HELMS
1
4
3
2
5
BAYSTAR HELM Ref# 1
Part# TELHH4314*
Type
Displacement (cubic inches)
Relief Valve Setting
Shaft Dia.
Port Size
Max. Wheel Dia.
Front Mount
1.4”
1000 PSI
3/4” Std. Taper
1/4” IPS
28”
*This is the standard Baystar helm STANDARD HELMS 2
TELHH5271
Front Mount
1.7”
1000 PSI
3/4” Std. Taper
1/4” IPS
26”
3
TELHH5272
Front Mount
2.4”
1000 PSI
3/4” Std. Taper
1/4” IPS
26”
TILT HELMS 4
TELHH5741
Tilt
1.7”
1000 PSI
3/4” Std. Taper
1/4” IPS
20”
5
TELHH5742
Tilt
2.4”
1000 PSI
3/4” Std. Taper
1/4” IPS
20”
1.7”
1000 PSI
3/4” Std. Taper
1/4” IPS
26”
2.0”
1500 PSI
3/4” Std. Taper
1/4” IPS
26”
REAR MOUNT HELM 6
TELHH5261
Rear Mount
SEASTAR PRO HELM 7
TELHH5770**
Pro front Mount
**Seastar Pro helm must use a balanced cylinder & kevlar hose
Teleflex Hydraulic SPORT Tilt Helm, 1.7 Comes With The Helm and Tilt Mechanism. Will Accept All Standard 3/4” Tapered Shaft Steering Wheel Part# TELHH6191 Hynautic by Teleflex H21 Helm 2.75 CI., 1” Straight Shaft, 20 Series Hynautic Heavy Duty Helm Pump. Prevents rudder feedback and is immediately adaptable to multi-station use. Features: 2.75 Cubic Inch 1 In. Straight Shaft Style, 1/4 In. Square Keyway Integral Valving HYNH21, size 6-1/8”, 10-3/4”, 3-1/2”
Part# HYNH-21
Description: Hydraulic helm
Description: Hydraulic tilt helm
Hynautic by Teleflex H-50 Hydraulic Steering Helm, for your older 50 Series pumps, H-50 2.0 cu. in. 3/4” taper shaft Part# HYNH-50
Description: Hydraulic helm
order toll free: 1-800-382-9335 I WWW.PARTMAN.COM I 24 hr. fax: 631-722-5719
277
MARINE STEERING & ENGINE CONTROLS
BAYSTAR & SEASTAR HYDRAULIC STEERING CYLINDERS SEASTAR O/B CYLINDER APPLICATION CHART
BAYSTAR OUTBOARD CYLINDER Ideal for small to medium outboard powered boats to 150 horsepower Part#
Description:
TELHC4645H
Compact cylinder - standard
TELHC4648H
Compact short plate cylinder
TELHC4658H
Compact cylinder
SEASTAR OUTBOARD CYLINDER Ideal for single & twin non-power assisted outboard engines up to 300 horsepower Part#
Description:
TELHC5342
Front mount cylinder
TELHC5345
Front mount cylinder - universal
TELHC5347
Front mount cylinder - honda 115-130hp
TELHC5348
Front mount - Yamaha 4 stroke
TELHC5358
Front mount - Yamaha
BAYSTAR O/B CYLINDER APPLICATION CHART
SEASTAR “TRIPLE” O/B CYLINDER APPLICATION CHART
278
Lighthouse Marine Supply I “saving boater’s weekends everywhere”
MARINE STEERING & ENGINE CONTROLS
TELEFLEX SEASTAR POWER ASSIST, TIE BARS, & O/B SIDE MOUNT CYLINDER SEASTAR HYDRAULIC POWER ASSISTED STEERING SeaStar Power Assist steering brings automotive-type steering comfort and control to powerboats, The addition of a Power Assist unit will greatly reduce steering effort and enhance the boating experience for everyone, The SeaStar Power Assist steering unit is designed for use with SeaStar manual hydraulic steering systems and is suited for all heavy / high torque steering applications Part# Description: TELPA1200-2 Power Assist Unit Part# TELHA1201
Description: Dual ignition switch
TELEFLEX TIE BARS Part#
Description::
TELHO6001
For HC5345 series cylinders ONLY, use for single cylinder dual engine & some triple engine applications, fits some Honda, Mercruiser & Yamaha
TELHO6002
For HC5345 series cylinders ONLY, use for single cylinder dual engine & some triple engine applications, fits some Honda, J/E, & Suzuki
TELHO6003
For HC5345 series cylinders ONLY, use for single cylinder dual engine & some triple engine applications, fits some Honda, J/E, & Suzuki
SEASTAR SIDE MOUNT CYLINDER & COMPONETS
Part#
Description::
TELHC5370
Side mount O/B cylinder, upto 300hp, not suitable for autopilot interface, suitable for engines with power steering, requires a minimum clearance of 13” from end of tilt tube towards motor well wall or gunwale & a minimum clearance of 14” for installing, stroke is 8”
TELHO5009
Tie bar kit for HC5370 side mount cylinder
TELHS5153
Seal kit for HC5370 side mount cylinder
order toll free: 1-800-382-9335 I WWW.PARTMAN.COM I 24 hr. fax: 631-722-5719
279
MARINE STEERING & ENGINE CONTROLS
SEASTAR INBOARD CYLINDERS, POWER TRIM, & HELM BACK PLATE ATM ALUMINUM BODY INBOARD HYDRAULIC CYLINDERS
PRO-TRIM ENGINE TRIM SWITCH
Regular duty aluminum cylinders, Easy installation for single and dual rudder vessels, Cylinders supplied with bleeder fittings, Two axis articulation, Easy autopilot interface
Trim control the way it’s meant to be at your fingertips, With Pro Trim from Teleflex, you can keep both hands on the wheel and concentrate on your driving. Its clean, modern design looks at home in any cockpit and there are no cords to tangle around the steering wheel, a big plus for boats with hydraulic steering! The Pro Trim single-switch controls one function enginetrim or jack plate
CYLINDERS Part#
Description::
TELHC5312-2
I/B inboard alum. cyl., BA-125-7ATM
TELHC5313
I/B inboard alum. cyl., BA-135-7ATM
TELHC5314
I/B inboard alum. cyl., BA-150-7ATM SEAL KITS & ADAPTER
Part#
Description::
TELHS5154
For HC5312-2, 125EM, MV, BJ)
TELHS5155
For HC5313, 125EM, MV, BJ)
TELHS5156
For HC5314, 125EM, MV, BJ)
TELHA5425
BJ to ATM mounting foot adapter
Part# Description: TELPT1000P Pro-Trim switch unit HYDRUALIC HELM BACK PLATE KIT (FOR HH5271 & HH5272 HELMS) This kit is used to retrofit a new SeaStar helm in the old 4.5” diameter hole or to reduce the helm protrusion from the dash by the thickness of the dash. It is also used to retrofit a new SeaStar standard helm into hole cutouts for mechanical & hydraulic steering
I/B ENGINE CYLINDERS ALUMINUM TRUNNION MOUNT
Part# TELHA5418
Stroke
Body Dia.
Shaft Dia.
Volume
TELHC5312-2
7”
1.38”
.50”
7.2 cu.in.
TELHC5313
7”
1.50”
.63”
8.2 cu.in.
TELHC5314
7”
1.75”
.63”
10.2 cu.in.
Cyl.#
“OLD SQUARE STYLE” SEA STAR 1 1984 - 1989
280
Description: Back plate kit
“NEW ROUND STYLE” SEA STAR 2 1990 - NEWER
Lighthouse Marine Supply I “saving boater’s weekends everywhere”
MARINE STEERING & ENGINE CONTROLS
INBOARD HYDRUALIC KITS, & MISC. HYDRAULIC STEERING CYLINDERS 2 LINE INBOARD HYDRAULIC STEERING KIT
Part# TELHK4410
2 LINE INBOARD HYDRAULIC STEERING KIT
Description: For planing hulls up to 32’, supplied with HC5312-2 cylinder
Part# TELHK4420
Description: For displacement hulls up to 26’, supplied with HC5313 cylinder
TELEFLEX MERCRUISER & OMC INBOARD HYDRAULIC STEERING CYLINDERS Easy installation, Simple multiple steering station connection, Can be interfaced with autopilots, Fits most power and non-power assist stern drives, Single and multiple drives MERCRUISER Power Assist
Model
To Date
Cyl.#
Part#
Non Power
Alpha I
1984 to date
BA135-7EM
TELHC5332
Non Power
Bravo I, II, III
1984 to date
BA135-7EM
TELHC5332
Power Assist
Alpha I
1984 to date
125-8EM
TELHC5328
Power Assist
Bravo I, II
1984 to date
125-8EM
TELHC5328
Power Assist
Bravo III
1984 to date
125-8EM
TELHC5328
Non Power
Cobra
1986 to date
BA150-7EM
TELHC5326
Non Power
King Cobra
1986 to date
BA150-7EM
TELHC5326
Power Assist
Cobra
1986 to date
125-8EM
TELHC5328
Power Assist
King Cobra
1986 to date
125-8EM
TELHC5328
OMC
HYNAUTIC ALUMINUM STEERING CYLINDER Cylinder designed for boats up to 38ft. where the steering loads are less than 10,000 inch-pounds of torque, The cylinder barrel & ends are T6061 aluminum with rods of 303 stainless steel, All cylinders have replaceable wiper seals Part# HYN-K19
Mount
Bore
Ball Joint
1-1/4”
Stroke Displacement 9”
9 cu.in.
order toll free: 1-800-382-9335 I WWW.PARTMAN.COM I 24 hr. fax: 631-722-5719
281
MARINE STEERING & ENGINE CONTROLS
HYDRAULIC STEERING CYLINDER & HELM SEAL KITS
HYDRAULIC STEERING HELM SEAL KITS Part#
Description:
TELHS5151 Seal kit for “Old Style” helm pumps with square mounting block “OLD SQUARE STYLE” SEA STAR 1 1984 - 1989
“NEW ROUND STYLE” SEA STAR 2 1990 - NEWER
Part#
Description:
TELHS5176
Seal kit for TELHH5770, TELHH5271, 72 TELhh5741 & other “New Style” helm pumps with round profile
TEL225226
Quad ring shaft seal for “SeaStar” helms TELHH5271, 72, TELHH5770, TELHH5741, 42 & TELHH5774 SIDE MOUNT CYLINDER SEAL KITS
Part#
Description:
TELHS5154 Seal kit for TELHC5312 (125EM, MV, BJ, ATM) TELHS5155 Seal kit for TELHC5313 (135EM, MV, BJ, ATM) TELHS5156 Seal kit for TELHH5314 (150EM, MV, BJ, ATM) TELHS5182 Seal kit for TELHC5318 (150-7BA, TM), 1-1/2” bronze cylinder TELHS5183 Seal kit for TELHC5319 (175-7BA, TM), 1-3/4” bronze cylinder TELHS5153 Seal kit for TELHC5370 (just seals) TELHS5173 Seal kit for TELHC5370 (entire screw on end & gland) FRONT MOUNT CYLINDER SEAL KITS
Part#
Description:
TELHS5152 Seal kit (old snap ring ends) TELHS5157 Seal kit with spanner for TELHC5342 & TELHC5345 TELHS5167 Same as TELHS5157, spanner wrench not included
282
Lighthouse Marine Supply I “saving boater’s weekends everywhere”
MARINE STEERING & ENGINE CONTROLS
TELEFLEX MARINE MECHANICAL STEERING
order toll free: 1-800-382-9335 I WWW.PARTMAN.COM I 24 hr. fax: 631-722-5719
283
MARINE STEERING & ENGINE CONTROLS
TELEFLEX MECHANICAL ROTARY STEERING KITS & CABLE
SAFE-T II NFB PREMIUM ROTARY STEERING SYSTEM
SAFE-T QC ROTARY STEERING SYSTEM
Includes: helm - SH5150P cable - SS62XX bezel - SB27150P
Includes: helm - SH5094P cable - SS62XX bezel - SB27484P
Ideal for traditional boat applications, Safe-T QC suits inboards, small outboard & power assisted stern drive applications up to 50mph Part#
Length:
Part#
Length:
TELSS137-08
8 ft.
TELSS137-15
15 ft.
TELSS137-09
9 ft.
TELSS137-16
16 ft.
TELSS137-10
10 ft.
TELSS137-17
17 ft.
TELSS137-11
11 ft.
TELSS137-18
18 ft.
TELSS137-12
12 ft.
TELSS137-19
19 ft.
TELSS137-13
13 ft.
TELSS137-20
20 ft.
TELSS137-14
14 ft.
Delivering additional comfort and safety on today’s outboard power boats (V4 max) locking out the torque felt at the steering wheel generated by the rotation of the propeller. Replaces standard Safe-T® steering without dash modifications, For single station use only. Part#
Delivering unsurpassed comfort and safety from a mechanical steering system the NFB 4.2 suits outboard power boats up to V6. Replaces standard Safe-T® steering without dash modifications, This 4 turn lock to lock system gives you a better mechanical advantage when turning against the prop torque Part#
Length:
TELSS147-10
10 ft.
TELSS147-16
16 ft.
TELSS147-11
11 ft.
TELSS147-17
17 ft.
TELSS147-12
12 ft.
TELSS147-18
18 ft.
TELSS147-13
13 ft.
TELSS147-19
19 ft.
TELSS147-14
14 ft.
TELSS147-15
15 ft.
284
TELSS147-20
Length:
10 ft.
TELSS132-16
16 ft.
TELSS132-11
11 ft.
TELSS132-17
17 ft.
TELSS132-12
12 ft.
TELSS132-18
18 ft.
TELSS132-13
13 ft.
TELSS132-19
19 ft.
TELSS132-14
14 ft.
TELSS132-20
20 ft.
TELSS132-15
15 ft.
QUICK CONNECT REPLACEMENT STEERING CABLE
Includes: helm - SH4910P cable - SS62XX bezel - SB27150P
Length:
Part#
TELSS132-10
NFB 4.2 PREMIUM ROTARY STEERING SYSTEM
Part#
Length:
20 ft.
Replacement cable for Safe-T and Big-T Teleflex Rotary cables & Quick connect steering systems, Optional quick connect converter is included (TELSA27620P) Will replace Teleflex SSC72 & SSC62 series, also Uflex M47 cables Part#
Length:
TELSSC61-06
6 ft.
TELSSC61-07
7 ft.
TELSSC61-08
8 ft.
TELSSC61-09
9 ft.
TELSSC61-10
10 ft.
TELSSC61-11
11 ft.
TELSSC61-12
12 ft.
TELSSC61-13
13 ft.
TELSSC61-14
14 ft.
TELSSC61-15
15 ft.
TELSSC61-16
16 ft.
TELSSC61-17
17 ft.
TELSSC61-18
18 ft.
Part#
Length:
TELSSC61-19
19 ft.
TELSSC61-20
20 ft.
TELSSC61-21
21 ft.
TELSSC61-22
22 ft.
TELSSC61-23
23 ft.
TELSSC61-24
24 ft.
TELSSC61-25
25 ft.
TELSSC61-26
26 ft.
TELSSC61-27
27 ft.
TELSSC61-28
28 ft.
TELSSC61-29
29 ft.
TELSSC61-30
30 ft.
Lighthouse Marine Supply I “saving boater’s weekends everywhere”
MARINE STEERING & ENGINE CONTROLS
TELEFLEX MECHANICAL RACK STEERING KITS & CABLES THE RACK NFB STEERING SYSTEM
THE RACK BACKMOUNT STEERING SYSTEM
Includes: helm - SH5210P cable - SS134XX bezel - SB39526P
This unique back mount Rack system allows fast and easy installation and delivers a precise and comfortable steering “feel”. Suitable for use on outboard and stern drive boats. Applies to virtually all power-assisted stern drive boats with wheels up to 16” diameter. Back Mount Replaces 1984-date Teleflex “The Rack” steering without dash modification Part#
Length:
Part#
Length:
TELSS141-08
8 ft.
TELSS141-15
15 ft.
TELSS141-09
9 ft.
TELSS141-16
16 ft.
TELSS141-10
10 ft.
TELSS141-17
17 ft
TELSS141-11
11 ft.
TELSS141-18
18 ft.
TELSS141-12
12 ft.
TELSS141-19
19 ft.
TELSS141-13
13 ft.
TELSS141-20
20 ft.
TELSS141-14
14 ft.
Includes: helm - SH5230P cable - SS134XX bezel - SB39526P
Fits boats up to 24’ with single non-power assisted outboards up to V6 & top speeds of 50mph, Replaces standard teleflex rack steering systems without modification, 4 turns lock to lock, Eliminates The Force Generated From The Prop Thrust. Makes Steering Easier With Less Strain On The Operator Part#
Part#
Length:
12 ft.
TELSS151-17
17 ft.
TELSS151-13
13 ft.
TELSS151-18
18 ft.
TELSS151-14
14 ft.
TELSS151-19
19 ft.
TELSS151-15
15 ft.
TELSS151-20
20 ft.
TELSS151-16
16 ft.
THE BACK MOUNT DUAL REPLACEMENT STEERING CABLE
Replacement steering cable for the Teleflex “Back Mount” dual cable system
Replacement steering cable for the Teleflex “Back Mount” TELSS141 & TELSS151 steering system Length:
Part#
TELSS151-12
THE RACK BACKMOUNT REPLACEMENT STEERING CABLE
Part#
Length:
Length:
Part#
Length:
Part#
Length:
TELSSC134-11
11 ft.
TELSSC134-16
16 ft.
TELSSC135-11
11 ft
TELSSC135-15
15 ft
TELSSC134-12
12 ft.
TELSSC134-17
17 ft.
TELSSC135-12
12 ft
TELSSC135-16
16 ft
TELSSC134-13
13 ft.
TELSSC134-18
18 ft.
TELSSC135-13
13 ft
TELSSC135-17
17 ft
20 ft.
TELSSC135-14
14 ft
TELSSC135-18
18 ft
TELSSC134-14
14 ft.
TELSSC134-15
15 ft.
TELSSC134-20
order toll free: 1-800-382-9335 I WWW.PARTMAN.COM I 24 hr. fax: 631-722-5719
285
MARINE STEERING & ENGINE CONTROLS
TELEFLEX MECHANICAL STEERING HELMS & COMPONENTS
“THE RACK” STEERING HELMS
SAFE-T QUICK CONNECT HELMS
Direct replacement for any steering system with “The Rack” helm
Direct replacement for any steering system with Safe-T QC helm
1
3
2
1 4 Ref# Part#
Ref# Part#
3
2
Description:
1
TELSH5094
Quick connect single helm
2
TELSH5294P
Safe-T twin helm
3
TELSH91523P
Performance Safe-T/QC tilt single helm
4
TELSH91524P
Performance Safe-T/QC tilt dual helm
Description:
1
TELSH5210P
Back mount helm - standard
2
TELSH5230P
NFB single helm
3
TELSH91630P NFB Rack tilt helm BEZEL KITS
“NFB” NO FEEDBACK STEERING HELMS Turn any Safe-T QC system into a NFB by replacing with these helms
Part#
Description:
TELSB39544P NFB Rack Bezel Kit TELSB39526P The Rack 90° bezel - standard TELSB27150P 90° NFB Safe-T bezel kit
1
3
TELSB27483
20° Safe-T II bezel kit
TELSB27484
90° Safe-T II bezel kit WEDGE KITS
4
2
Part#
TELSB27448P 10° wedge kit
10° 5
6
Ref# Part#
7
Description:
1
TELSH5150P
Safe-T II NFB single helm upto V4
2
TELSH4910P
NFB single helm upto V6
3
TELSH4920P
NFB twin helm
4
TELSH91526P* NFB tilt single helm
5
TELSH91527P* NFB 4.2 dual tilt helm
6
TELSH91190P*
NFB rotary tilt helm
7
TELSH91500
Tilt mechanism for * helms
286
Description:
20°
TELSB27449P 20° wedge kit
QC II CONVERTER
SPENT TUBE
Converts old style rotary helms Safe-T & Big-T with threaded spigots to accept the new SSC61 series cables
For replacement of current spent tubes for rotary helms without nut, NFB Safe-T QC
Part# TELSA27620P
Part# TELSA38603
Lighthouse Marine Supply I “saving boater’s weekends everywhere”
MARINE STEERING & ENGINE CONTROLS
TILT TUBES, STEERING WHEELS & COMPONENTS
STAINLESS STEEL TILT TUBE, REAMER, & NUT
Part#
Description:
VIKSTT-1
7/8” OD For 2 Cyl. Mercury, Mariner, Nissan, Honda, Suzuki, & OMC
VIKSTT-2
For 3, 4, & 6 Cyl. OMC
VIKSTT-3
1.035 OD for 3, 4, & 6 Cyl. Mercury, & Mariner
VIKSTT-4
1973-1978 3, & 4 Cyl. OMC
2 & 4 Cyl. Yamaha, 40 To 90HP. *Will VIKSTT-4YN Not Work On A 1993 40HP* VIKTTR-375
Stainless Steel Reamer Tilt Tube
VIKSLN-1
Stainless Steel Nut, replaces OMC #323599
CABLE GUARD TILT TUBE SEAL & NUT Install easily over the tilt tube nut & efficiently wipes the steering cable output ram clean, seals out dirt, salt, & rust, keeps lubrication in tilt tube
Part# TELSA39329P
Description: Cable gaurd protecter
SPORT PERFORMANCE STEERING WHEEL Beautiful high styling with rugged construction for marine use, Made of durable plastic which is U.V. & corosion resistant, Will fit any 3/4” taper steering helm
Part# TELSW59291B
Description: Teleflex “Champion” steering wheel, 13” dia., 3 spoke
DESTROYER STEERING WHEELS WITH BLACK CAP
These non magnetic stainless steel wheels are constructed of high grade stainless steel, These wheels have a cast hub with welded spokes at the rim Part#
Dia.
Shaft: Spokes:
WHCS-9001
13-1/2”
3/4”
Degree:
5
22
WHCS-9002
15”
3/4”
5
22
UFLV42
15”
3/4”
5
10
UNIVERSAL SPEED KNOB
DUAL STATION ROTARY CABLES & HELMS
Part# WHCS-9005C
Description: Stainless Steel Speed Knob fits standard Destroyer wheels, includes locking nut & wrench
STEERING WHEEL MOUNT KIT
CALL 1-800-382-9335 FOR APPLICATIONS & PRICING
Part# TELSA2745417P
Description: Steering Wheel Mount Kit, Kit comes with Nut, Washer, & Key
order toll free: 1-800-382-9335 I WWW.PARTMAN.COM I 24 hr. fax: 631-722-5719
287
MARINE STEERING & ENGINE CONTROLS
MECHANICAL STEERING CLAMP BLOCKS, MOUNTS, & COMPONENTS
Part# MRS306983
Description: Adapts Command 290 cables to Teleflex Big-T helm
Part# MRS300617 MRS307046 MRS064480
Description: Inboard Bracket, Zinc plated Steel Inboard Bracket, Stainless Steel Tube Only, Aluminum
Part# TELSA27579P
Description: Inboard Clamp Block, 4-1/2” Stand off
Part# TELSA36316
Description: Splash Well Threaded Tube w/ Ball
Part# TELSA27578
Description: Inboard Clamp Block, 2-1/4” Stand off
Part# TELSA27274 TELSA27275
Description: Aluminum Support Tube Stainless Steel Support Tube
STIANLESS STEEL LINK ARMS Part# TELSA27253
Description: Splash Well Mount 15 degree Cable Support
Part# TNRSLA-9000 TNRSLA-9501
Description: Up to 100HP V6 Outboards (OMC)
Part# TELSA27314
Description: Stainless Steel Kit
Part# TELSA27254 Description: Splash Well 90 degree Cable Spport
Part# TELSA27255 Description: Transom Support Clamp Block, Stainless Steel Part# TELSA27256 Description: Transom Support Clamp Block, Corrosion Resistant
288
Part# TELSA27149 Description: O/B Clamp Block, Stainless Steel Part# TELSA27055 Description: O/B Clamp Block, Corrosion Resistant
Lighthouse Marine Supply I “saving boater’s weekends everywhere”
MARINE STEERING & ENGINE CONTROLS
TELEFLEX NON-CURRENT STEERING CABLES & HELMS
MORSE COMMAND 290 ROTARY REPLACEMENT STEERING CABLE
Replaces Morse cables 300962, 304411, & 304415 Part#
Length:
Part#
Length:
TELSSC52-06
6 ft.
TELSSC52-18
18 ft.
TELSSC52-07
7 ft.
TELSSC52-19
19 ft.
TELSSC52-08
8 ft.
TELSSC52-20
20 ft.
TELSSC52-09
9 ft.
TELSSC52-21
21 ft.
TELSSC52-10
10 ft.
TELSSC52-22
22 ft.
TELSSC52-11
11 ft.
TELSSC52-23
23 ft.
TELSSC52-12
12 ft.
TELSSC52-24
24 ft.
TELSSC52-13
13 ft.
TELSSC52-25
25 ft.
TELSSC52-14
14 ft.
TELSSC52-26
26 ft.
TELSSC52-15
15 ft.
TELSSC52-27
27 ft.
TELSSC52-16
16 ft.
TELSSC52-28
28 ft.
TELSSC52-17
17 ft.
TELSSC52-30
30 ft.
TELEFLEX “RACK” STEERING CABLE REPLACEMENT FOR “OLD STYLE”
Replacement steering cable for teleflex 1984 - 1996 “old style” rack systems, Does not fit “new style” rack systems & is not interchangeable with TELSSC134 Part#
Length:
Part#
Length:
TELSSC124-07
9 ft.
TELSSC124-19
15 ft.
TELSSC124-08
10 ft.
TELSSC124-20
16 ft.
TELSSC124-09
11 ft.
TELSSC124-21
17 ft.
TELSSC124-10
12 ft.
TELSSC124-22
18 ft.
TELSSC124-11
13 ft.
TELSSC124-23
19 ft.
TELSSC124-12
14 ft.
TELSSC124-24
20 ft.
REPLACEMENT “RACK” STEERING CABLE FOR MORSE COMMAND 200
SAFE-T SINGLE STEERING HELM
Part# TELSH5023
Early style compact rotary helm male threaded input & output connections
Description: Safe T Single Steering Helm
“BIG-T” BEZEL KITS
Exact replacement cable for Morse Command 200 “rack” cable, Replaces Morse cables 300619 & 300620, meets original equipment specs Part#
Length:
Part#
Length:
TELSSC130-10
10 ft.
TELSSC130-16
16 ft.
TELSSC130-12
12 ft.
TELSSC130-17
17 ft.
TELSSC130-13
13 ft.
TELSSC130-18
18 ft.
TELSSC130-14
14 ft.
TELSSC130-19
19 ft.
TELSSC130-15
15 ft.
TELSSC130-20
20 ft.
“BIG T” SINGLE STATION HELM
Part#
Description:
TELSB27265P
20° / 90° 2pc. black
TELSB27268
90° 1pc. chrome
TELSB27263
20° / 90° 2pc. white
SPENT TUBE
For replacement of current spent tubes for rotary helms with nut, Big-T, Safe-T, & Safe-T twin Part# TELSA35680
The push-pull system is recommended for outboard, I/O & inboard boats with planing hulls, The tension system is recommended for high performance single or twin engine boats with a heavy steering wheel, Steering helm, bezel kit, cable assembly & connection required, Tension systems require two connection Part# TELSH5000
Description: Big T Single Station Helm
order toll free: 1-800-382-9335 I WWW.PARTMAN.COM I 24 hr. fax: 631-722-5719
289
MARINE STEERING & ENGINE CONTROLS
TELEFLEX & MORSE SIDE & TOP MOUNT CONTROL BOXES
SINGLE LEVER TOP MOUNT DUAL FUNCTION CONTROL
SINGLE LEVER SIDE MOUNT DUAL FUNCTION CONTROL
1
2
3
Single Lever, Side Mount Control Box with focus on ergonomics in every detail. The result is an engine control which is rugged and substantial, yet feels natural in every function. Shift and Throttle in one handle, for 33c, OMC, & Merc cables Ref# Part#
Description:
2
1
3
Single Lever, Binnacle Mount Control Box with focus on ergonomics in every detail. The result is an engine control which is rugged and substantial, yet feels natural in every function. Shift and Throttle in one handle, for 33c, OMC, & Merc cables Ref# Part#
Description:
1
TELCH1750P Cut off only
1
TELCH7540P Cut off only
2
TELCH1751P Cut off, Trim switch
2
TELCH7541P Cut off, Trim switch
3
TELCH1752P Cut off, trim & tilt Switches
3
TELCH7542P Cut off, trim & tilt Switches SINGLE LEVER TOP MOUNT DUAL FUNCTION CONTROL
SINGLE LEVER SIDE MOUNT DUAL FUNCTION CONTROL
1
This SL-3 side mount control box was designed especially for the replacement of OEM controls
2
Ref# Part#
Description:
1
2
Ref# Part#
1
MRS309473
Trim & tilt switches
1
2
MRS309475002
Trim, tilt, & trailer up switches
2
Standard, NO TRIM OR TILT
MRS309478002
Trim & tilt switches
SINGLE LEVER TOP MOUNT DUAL FUNCTION CONTROL FOR VOLVO I/O’s
This SL-3 Side Mount Control Box was Designed specifically for Volvo I/O’s, Great Replacement for original Volvo control boxes Description:
MRS309475001 Trim, tilt, & trailer up switches
290
Description:
MRS309476
SINGLE LEVER SIDE MOUNT DUAL FUNCTION CONTROL FOR VOLVO I/O’s
Part#
This SL-3 top mount control box was designed especially for the replacement of OEM controls
This SL-3 Side Mount Control Box was Designed specifically for Volvo I/O’s, Great Replacement for original Volvo control boxes Part#
Description:
MRS309478001 Trim & TILTswitches
Lighthouse Marine Supply I “saving boater’s weekends everywhere”
MARINE STEERING & ENGINE CONTROLS
UFLEX SIDE & TOP MOUNT CONTROL BOXES
SINGLE LEVER SIDE MOUNT DUAL FUNCTION CONTROL
1
SINGLE LEVER SIDE MOUNT DUAL FUNCTION CONTROL
2
1
Suitable for any type of boat with outboard, inboard or I/O. Can be installed horizontally or vertically, on the port or starboard side of the boat. Accepts “33c” 10-32 threaded end type cables, 1979 and newer (new style) OMC cable and Mercury/Mercruiser style cables. You will need #UFLK35 when installing Mercury/Mercruiser style cables Ref# Part#
2
3
Suitable for any type of boat with outboard, inboard or I/O engines. Accepts “33c” type 10-32 threaded end cables, 1979 and newer (new style) OMC cables and Mercury/Mercruiser type cables, You will need #UFLK35 when installing Mercury/Mercruiser style cables Ref# Part#
Description:
Description:
1
UFLB73 Standard, NO TRIM OR TILT
1
UFLB183
Standard, NO TRIM OR TILT
2
UFLB77 Trim & tilt switches
2
UFLB184
Trim & tilt switches
3
UFLB65 Trim & tilt switches (chrome plated) DUAL LEVER SIDE MOUNT CONTROL
SINGLE LEVER SIDE MOUNT DUAL FUNCTION CONTROL FOR MERCURY / MERCRUISER
Suitable for all outboard engines, These Control Boxes are made of Nylon Fiberglass with Anodized Aluminum Levers
Suitable for any type of boat with outboard, inboard or I/O. Can be installed horizontally or vertically, on the port or starboard side of the boat. for Mercury/Mercruiser style cables. Includes UFLK35 connector Part#
Description:
UFLB184M
Trim & tilt switches
CONNECTION KIT FOR MERCURY / MERCRUISER CONTROL CABLES
This kit is required when attaching Mercury / Mercruiser cables for Uflex-C-5,C-16 cables or Teleflex CC179 cables to the following Uflex control boxes B183, B184, B90,B89,B65,B76,B66,B78,B73,B77,B74,B79
Part#
Description:
UFLB47
Throttle & shift levers
SINGLE LEVER SIDE MOUNT DUAL FUNCTION CONTROL
Suitable for any type of boat with outboard, inboard or I/O. Can be installed horizontally or vertically, on the port or starboard side of the boat. for Mercury/ Mercruiser style cables, You will need #UFLK35 when installing Mercury/Mercruiser style cables
Part#
Description:
Part#
Description:
UFLK35
Connection kit
UFLB90
Standard, NO TRIM OR TILT
order toll free: 1-800-382-9335 I WWW.PARTMAN.COM I 24 hr. fax: 631-722-5719
291
MARINE STEERING & ENGINE CONTROLS
UFLEX & MORSE DUAL LEVER TOP MOUNT CONTROL BOXES DUAL LEVER TOP MOUNT DUAL FUNCTION CONTROL
DUAL LEVER TOP MOUNT DUAL FUNCTION CONTROL
Flush Mount with Straight Levers. Throttle lever is provided Flush Mount with Raked Levers. Throttle lever is provided with adjustable tension. Shift lever with forward, neutral, with adjustable tension. Shift lever with forward, neutral, & reverse detents. “Order optional neutral safety switch & reverse detents. “Order optional neutral safety switch #UFLX12 if needed”. Throttle handle color Black, Shift #UFLX12 if needed”. Throttle handle color Black, Shift handle color Red. Suitable for fly bridge installation handle color Red. Suitable for fly bridge installation Part#
Description:
Part#
Description:
UFLB50
Throttle (black) & shift (red) levers
UFLB46
Throttle (black) & shift (red) levers
DUAL LEVER TOP MOUNT SINGLE FUNCTION CONTROLS
1
DUAL LEVER TOP MOUNT SINGLE FUNCTION CONTROLS
1
2
2
Flush Mount with Straight Levers. Throttle lever is provided Flush Mount with Raked Levers. Throttle lever is provided with adjustable tension. Shift lever with forward, neutral, with adjustable tension. Shift lever with forward, neutral, & reverse detents. “Order optional neutral safety switch & reverse detents. “Order optional neutral safety switch #UFLX12 if needed”. Suitable for fly bridge installation #UFLX12 if needed”. Suitable for fly bridge installation Ref# Part#
Description:
Ref# Part#
Description:
1
UFLB50S Shift only (both red hanldes)
1
UFLB46S Shift only (both red hanldes)
2
UFLB50T Throttle only (both black hanldes)
2
UFLB46T Throttle only (both black hanldes) DUAL LEVER TOP MOUNT SINGLE FUNCTION CONTROLS
DUAL LEVER TOP MOUNT DUAL FUNCTION CONTROL
1
SL-3 Twin is designed for “one hand” operation for boats with twin outboards or I/O’s that DO NOT require Trim or Tilt capabilities. Works on all Outboards & I/O’s Dual-Function Levers (both throttle & shift in one) Part#
Description:
MRS309479 Both throttle & shift levers
292
2
SL-3 Twin is designed for “one hand” operation for boats with twin outboards or I/O’s requiring Trim or Tilt capabilities. Works on all Outboards and I/O’s Ref# Part#
Description:
1
MRS309480
Trim only
2
MRS309481
Trim & tilt, Optional trailer up switch
Lighthouse Marine Supply I “saving boater’s weekends everywhere”
MARINE STEERING & ENGINE CONTROLS
TELEFLEX & MORSE TOP MOUNT CONTROL BOXES
DUAL LEVER TWIN “SR” SINGLE FUNCTION CONTROL
Removable stainless steel cover, Adjustable brakes & stops. Optional neutral safety switch to prevent starting in gear. Optional gear detent kit. Replaces Morse & Hynautic 036469-001, for single & dual station applications with twin engines & hydraulic transmissions, uses 33C, 33C-Supreme & 3300 control cables Part# Description: TELCH5400P
Throttle (black) & shift (red) levers
DUAL LEVER “SLT” SINGLE FUNCTION CONTROL
Patented Self Locking Throttle technology makes the SLT the only control that stops cable creep & works flawlessly in single or multi- station applications, Stops unwanted control cable cable movement without cable brakes or other makeshift soulutions, uses 33C, 33C-Supreme & 3300 control cables Part#
Description:
TELCH5600P
Throttle (black) & shift (red) levers
TWIN “S” SINGLE & DUAL FUNCTION CONTROLS
“MT3” SINGLE & DUAL FUNCTION SINGLE ENGINE CONTROLS
2
1
Use in inboard engine applications. Replaces Morse & Hynautic part #031002-001 & 031002-002. Highly polished corrosion-resistant chrome-plated brass covers. Optional netural saftey switch available. Uses 33C, 33C-Supreme & 3300 control cables Ref# Part#
2
1
Description:
This control box from Morse is an Ideal Replacement for OEM Controls on Outboards, I/O’s & Inboards, order optional Neutral Safety Switch, Replaces Morse 308601, uses 33C, 33C-Supreme & 3300 control cables Ref# Part#
Description:
1
TELCH5200P Single lever, Single function
1
TELCH5310P Single lever, Dual function
2
TELCH5210P Dual lever, Single function
2
TELCH5300P Dual lever, Dual function
SINGLE & DUAL LEVER / FUNCTION CONTROLS
1
SINGLE & DUAL LEVER / FUNCTION CONTROLS
1
2
Suitable for any type of boats with outboard, inboard or I/O engines. Accepts “33c” type 10-32 threaded end cables. Pull-out handle disengages shift for warm-up. Built in friction to avoid throttle creep, includes neutral safety switch Ref# Part#
Description:
2
Features external brake tension adjust & positive travel limit stops. Complete with cable mounting bracket & positive clutch detent. Reversible name plate for either clutch or throttle. Styled in solid brass with heavy chrome plating Ref# Part#
Description:
1
UFLB103
Single lever, Dual function
1
WHCS-600
Single lever, Dual function
2
UFLB104
Dual lever, Dual function
2
WHCS-601
Dual lever, Dual function
order toll free: 1-800-382-9335 I WWW.PARTMAN.COM I 24 hr. fax: 631-722-5719
293
MARINE STEERING & ENGINE CONTROLS
TELEFLEX CONTROL CABLE MEASURING TECH REFERENCE
294
Lighthouse Marine Supply I “saving boater’s weekends everywhere”
MARINE STEERING & ENGINE CONTROLS TELEFLEX REPLACEMENT CONTROL CABLES
TELEFLEX CC3300 STANDARD BLACK JACKETCONTROL CABLES
TELEFLEX 33C RED-JACKET™ CONTROL CABLES
For I/O’s, Inboards & outboards, fits most engines, just measure tip to tip for length, 10-32 UNF threads on both ends, 8” bend radius, 3” travel Replacement for Morse 33-C red jacket control cable. Replaces Morse 33-C part # 032377-03-XXX. These are the most common control cables you may expect to find on inboard applications. Both ends have 10-32 threads
Part#
Length:
Part#
Part#
Length:
Part#
Length:
TELCC330-09
9 ft.
TELCC330-23
23 ft.
TELCC330-10
10 ft.
TELCC330-24
24 ft.
TELCC330-11
11 ft.
TELCC330-25
25 ft.
TELCC330-12
12 ft.
TELCC330-26
26 ft.
TELCC330-13
13 ft.
TELCC330-27
27 ft.
Length:
TELCC330-14
14 ft.
TELCC330-28
28 ft.
15 ft.
TELCC332-10
10 ft.
TELCC332-18
18 ft.
TELCC330-15
TELCC330-29
29 ft.
TELCC332-11
11 ft.
TELCC332-19
19 ft.
TELCC330-16
16 ft.
TELCC330-30
30 ft.
TELCC332-12
12 ft.
TELCC332-20
20 ft.
TELCC330-17
17 ft.
TELCC330-32
32 ft.
TELCC332-13
13 ft.
TELCC332-21
21 ft.
TELCC330-18
18 ft.
TELCC330-34
34 ft.
TELCC332-14
14 ft.
TELCC332-22
22 ft.
TELCC330-19
19 ft.
TELCC330-36
36 ft.
TELCC332-15
15 ft.
TELCC332-23
23 ft.
TELCC330-20
20 ft.
TELCC330-38
38 ft.
TELCC332-16
16 ft.
TELCC332-24
24 ft.
TELCC330-21
21 ft.
TELCC330-40
40 ft.
TELCC332-17
17 ft.
TELCC330-22
22 ft.
TELCC330-50
50 ft.
TELEFLEX “TFXTREME” PREMIUM “33C” CONTROL CABLES
TELEFLEX “TFXTREME” PREMIUM “43C” (CC4300) CONTROL CABLES
“Type 33-C” premium control cable. replaces # CC633 & CC3300, 10-32 UNF threaded ends, BLACK outer jacket, 3” travel, 4” bend radius, Splined core for unparalleled smoothness & response
Replaces Teleflex # TELCC693. 4300 SERIES, 1/4-28 UNF threaded ends, 3” travel, 5” bend radius Part#
Length:
Part#
Length:
TELCCX433-06
6 ft.
TELCCX433-14
14 ft.
TELCCX433-07
7 ft.
TELCCX433-15
15 ft.
TELCCX433-08
8 ft.
TELCCX433-16
16 ft.
TELCCX433-09
9 ft.
TELCCX433-17
17 ft.
TELCCX433-10
10 ft.
TELCCX433-18
18 ft.
TELCCX433-11
11 ft.
TELCCX433-19
19 ft.
TELCCX433-12
12 ft.
TELCCX433-20
20 ft.
TELCCX433-13
13 ft.
Part#
Length:
Part#
Length:
TELCCX633-06
6 ft.
TELCCX633-23
23 ft.
TELCCX633-07
7 ft.
TELCCX633-24
24 ft.
TELCCX633-08
8 ft.
TELCCX633-25
25 ft.
TELCCX633-09
9 ft.
TELCCX633-26
26 ft.
TELCCX633-10
10 ft.
TELCCX633-28
28 ft.
TELCCX633-15
15 ft.
TELCCX633-29
29 ft.
TELCCX633-16
16 ft.
TELCCX633-30
30 ft.
TELCCX633-17
17 ft.
TELCCX633-32
32 ft.
TELCCX633-18
18 ft.
TELCCX633-34
34 ft.
TELCCX633-19
19 ft.
TELCCX633-36
36 ft.
TELCCX633-20
20 ft.
TELCCX633-40
40 ft.
TELCCX633-21
21 ft.
TELCCX633-50
50 ft.
TELCCX633-22
22 ft.
order toll free: 1-800-382-9335 I WWW.PARTMAN.COM I 24 hr. fax: 631-722-5719
295
MARINE STEERING & ENGINE CONTROLS
TELEFLEX REPLACEMENT CONTROL CABLES FOR MERCRUISER TELEFLEX “600” MERCURY STANDARD CONTROL CABLES
Direct replacement for the original Type “600” (Standard) control cable found on Mercury / Mercruiser engines, (From 1968 to 2003), Replaces Merc cable #C34555A & #850716 Part#
Length:
Part#
Length:
TELCC179-06
6 ft.
TELCC179-17
17 ft.
TELCC179-07
7 ft.
TELCC179-18
18 ft.
TELCC179-08
8 ft.
TELCC179-19
19 ft.
TELCC179-09
9 ft.
TELCC179-20
20 ft.
TELCC179-10
10 ft.
TELCC179-21
21 ft.
TELCC179-11
11 ft.
TELCC179-22
22 ft.
TELCC179-12
12 ft.
TELCC179-23
23 ft.
TELCC179-13
13 ft.
TELCC179-24
24 ft.
TELCC179-14
14 ft.
TELCC179-25
25 ft.
TELCC179-15
15 ft.
TELCC179-26
26 ft.
TELCC179-28
28 ft.
TELCC179-16
16 ft.
TELEFLEX “GEN-II” 189 SERIES MERCURY STANDARD CONTROL CABLES
Designed to be a direct replacement for the “NEWER” Type “GEN-II” control cable found on Mercury/Mercruiser engines 2003 & newer, using Mercury/Mercruiser 4000 series control boxes, Replaces Merury part #883719 Part#
Length:
Part#
Premium replacement for the original Type “600” (Standard) control cable found on Mercury / Mercruiser engines, (From 1968 to 2003), Replaces Merc cable #C34555A & #850716 & Teleflex CC635 series cables
Part#
Length:
Part#
Length:
TELCCX179-14
14 ft.
TELCCX179-21
21 ft.
TELCCX179-15
15 ft.
TELCCX179-22
22 ft.
TELCCX179-16
16 ft.
TELCCX179-23
23 ft.
TELCCX179-17
17 ft.
TELCCX179-24
24 ft.
TELCCX179-18
18 ft.
TELCCX179-25
25 ft.
TELCCX179-19
19 ft.
TELCCX179-26
26 ft.
TELCCX179-20
20 ft.
TELCCX179-28
28 ft.
TELEFLEX “TFXTREME” PREMIUM “GEN-II” 189 SERIES MERCURY CONTROL CABLES
Designed to be a premium replacement for the “NEWER” Type “GEN-II” control cable found on Mercury/Mercruiser engines 2003 & newer, using Mercury/Mercruiser 4000 series control boxes, Replaces Merury part #883719
Length:
TELCC189-07
7 ft.
TELCC189-17
17 ft.
TELCC189-08
8 ft.
TELCC189-18
18 ft.
TELCC189-09
9 ft.
TELCC189-19
19 ft.
TELCC189-10
10 ft.
TELCC189-20
20 ft.
TELCC189-11
11 ft.
TELCC189-21
21 ft.
TELCC189-12
12 ft.
TELCC189-22
22 ft.
TELCC189-13
13 ft.
TELCC189-23
23 ft.
TELCC189-14
14 ft.
TELCC189-24
24 ft.
TELCC189-15
15 ft.
TELCC189-25
25 ft.
TELCC189-16
16 ft.
296
TELEFLEX “TFXTREME” PREMIUM “600” CONTROL CABLES
Part#
Length:
Part#
Length:
TELCCX189-14
14 ft.
TELCCX189-21
21 ft.
TELCCX189-15
15 ft.
TELCCX189-22
22 ft.
TELCCX189-16
16 ft.
TELCCX189-23
23 ft.
TELCCX189-17
17 ft.
TELCCX189-24
24 ft.
TELCCX189-18
18 ft.
TELCCX189-25
25 ft.
TELCCX189-19
19 ft.
TELCCX189-26
26 ft.
TELCCX189-20
20 ft.
TELCCX189-28
28 ft.
Lighthouse Marine Supply I “saving boater’s weekends everywhere”
MARINE STEERING & ENGINE CONTROLS
TELEFLEX REPLACEMENT CONTROL CABLES FOR OMC TELEFLEX “TFXTREME” PREMIUM “64C” CONTROL CABLES
TELEFLEX “400” EARLY OMC STANDARD CONTROL CABLES
Direct replacement for the original Type “400” (Standard) control cable found on early OMC engines, (pre-1979)
Part#
Length:
Part#
Length:
TELCC170-06
6 ft.
TELCC170-14
14 ft.
TELCC170-07
7 ft.
TELCC170-15
15 ft.
TELCC170-08
8 ft.
TELCC170-16
16 ft.
TELCC170-09
9 ft.
TELCC170-17
17 ft.
TELCC170-10
10 ft.
TELCC170-18
18 ft.
TELCC170-11
11 ft.
TELCC170-19
19 ft.
TELCC170-12
12 ft.
TELCC170-20
20 ft.
TELCC170-13
13 ft.
Replaces Teleflex # TELCC695. 6400 SERIES, 5/16-24 UNF threaded ends, 4” travel, 8” bend radius
Part#
Part#
Length:
Part#
Length:
TELCC205-06
6 ft.
TELCC205-17
17 ft.
TELCC205-07
7 ft.
TELCC205-18
18 ft.
TELCC205-08
8 ft.
TELCC205-19
19 ft.
TELCC205-09
9 ft.
TELCC205-20
20 ft.
TELCC205-10
10 ft.
TELCC205-21
21 ft.
TELCC205-11
11 ft.
TELCC205-22
22 ft.
TELCC205-12
12 ft.
TELCC205-23
23 ft.
TELCC205-13
13 ft.
TELCC205-24
24 ft.
TELCC205-14
14 ft.
TELCC205-25
25 ft.
TELCC205-15
15 ft.
TELCC205-26
26 ft.
TELCC205-16
16 ft.
TELCC205-28
28 ft.
Part#
Length:
TELCCX643-08
8 ft.
TELCCX643-12
12 ft.
TELCCX643-09
9 ft.
TELCCX643-13
13 ft.
TELCCX643-10
10 ft.
TELCCX643-14
14 ft.
TELCCX643-11
11 ft.
TELEFLEX “479” LATER OMC STANDARD CONTROL CABLES
Direct replacement for the original Type “479” (Standard) control cable found on later OMC engines, (1979-newer)
Length:
TELEFLEX “TFXTREME” PREMIUM “479” CONTROL CABLES
Direct replacement for the original Type “479” control cable found on later OMC engines, (1979-newer), replaces Teleflex cc205 cables Part#
Length:
Part#
Length:
TELCCX205-14
14 ft.
TELCCX205-21
21 ft.
TELCCX205-15
15 ft.
TELCCX205-22
22 ft.
TELCCX205-16
16 ft.
TELCCX205-23
23 ft.
TELCCX205-17
17 ft.
TELCCX205-24
24 ft.
TELCCX205-18
18 ft.
TELCCX205-25
25 ft.
TELCCX205-19
19 ft.
TELCCX205-26
26 ft.
TELCCX205-20
20 ft.
order toll free: 1-800-382-9335 I WWW.PARTMAN.COM I 24 hr. fax: 631-722-5719
297
MARINE STEERING & ENGINE CONTROLS
CONTROL BOX & CABLE COMPONENTS CONTROL LEVER REPLACEMENT KNOBS
2
1
CONTROL ADAPTER KITS
4
3
MRS301074
5
6
Replacement knobs for Teleflex CH5400P, CH5600P, CH5200P, CH5210P, CH5310P, CH5300P, Uflex B103, B104, & Whitecap S-600 & S-601 Ref#
MRS304939
With the use of either control adapter, the 33C & 3300 cables can be used with OMC, Johnson, Evinrude, Mariner, Mercury, & Mercruiser controls
Part#
Description:
1
MRS035232001
Ball, Red knob
2
MRS035232004
Ball, Black knob
3
ONG50020
Ball, Red grooved knob
Part#
4
ONG50030
Ball, Silver shift knob
MRS304939 OMC 1979 & later control adapter
5
WHCS-601KR
Ball, Red knob
MRS301074 Mercury control adapter
6
WHCS602KB
Ball, Black knob
MRS300555 Spare retainer clip for adapters
BULKHEAD STRAIN RELIEF
Distributes strain from bends in the hose, watertight gripper fitting, no leaks, Flange is 2-3/4” diameter & requires a installation hole Part#
Description:
T-HBSR-1K-DP Material, plastic TERMINAL EYES
Description:
PIVOT
Part#
A
B
MRS045583
3/16”
7/16”
MRS031029
1/4”
7/16”
MRS031539
1/4”
7/16”
MRS039110
1/4”
MRS031537
1/4”
C
D
E
3/8”
9/64”
11/16”
21/64”
9/64”
5/8”
3/8”
.191”
22.32”
1/2”
7/16”
9/64”
3/4”
1/2”
1/2”
13/64
7/8”
BALL JOINT
Part#
Size:
Series:
TELCA37701P
1/4-28
33C
Part#
Material:
A
B
C
Series:
MRS317413
Aluminum
1”
15/64”
5/16”
33
MRS031799-001
10-32
33C
MRS300646
Plastic
1”
15/64”
5/16”
33
TELCA28014P
1/4-28
43
MRS041134
Metal
1”
15/64”
5/16”
43
MRS029104
1/4-28
43
MRS037639
Metal
1”
15/64”
5/16”
43
MRS029108
5/16-24
64
298
Lighthouse Marine Supply I “saving boater’s weekends everywhere”
MARINE STEERING & ENGINE CONTROLS
CONTROL BOX & CABLE COMPINENTS
Part# TELCA27319 Description: Adapts C2, C8, C0, & 33C cables for use with Mercury outboards & Mercruiser I/O engines
Part# TELCA27373 Description: Adapts C2, C8, C0, & 33C cables for use with Mercruiser inboard engines
Part# TELCA27321 Description: Adapts C2, C8, C0, & 33C cables for use with Johnson/Evinrude outboards Pre-1979
Part# TELCA27320 Description: Adapts C2, C8, C0, & 33C cables for use with Johnson/Evinrude O/B’s, OMC I/O & inboards, 1979 to date
Part# MRS044386 Description: Cable brake for 30, 40, & 60 series, applied at control end of cable, keeps throttle cable from creeping back CABLE HOOK CLIP (30 SERIES CABLES)
Part# MRS036174 Description: For single cable Part# MRS036174 Description: For dual cable
Part# MRS301456 Description: (A) 1-1/2” L x (B) 5/16” dia. x (C) 1/4” - 28 Thread, contains pin, retaining ring, nut & washer
CABLE CLAMP & SHIM KITS Part# TELCA28020 TELCA28018 UFLL14
Description: 3300/33C series 4300/43C series C2, C8, C0, & 33C series
Part# TELCA37700
CABLE CLEVIS
(3300 series)
Description: 10-32” UNF, 1/4” pin dia., 9/32” jaw Part# MRS029025
(4300 series)
Description: 1/4-28” UNF, 5/16” pin dia., 9/32” jaw Part# TELCA28023
(6400 series)
Description: 5/16-24” UNF, 5/16” pin dia., 11/32” jaw
MOTORWELL BOOT
Part#
Description:
UFLR2
3” boot
ATT12822-5 3” boot ATT12820-5 4” boot UFLR1
CABLE CLAMP
Part#
5” boot
CABLE CLAMP SHIM
A
B
Series:
MRS031509
1”
1/2”
33C
MRS032010
7/8”
1/2”
33C
Part#
A
B
C
MRS035777
7/8”
1-3/8”
1/2”
MRS031538
1”
1-1/2”
1/2”
order toll free: 1-800-382-9335 I WWW.PARTMAN.COM I 24 hr. fax: 631-722-5719
299