MANUFACTURING PROCESSES - AMEM 201 – Lecture 8: 8: Machining Processes Milling

DR. SOTIRIS L. OMIROU

Milling Machining - Definition

Milling is one of the basic machining processes that allows large amounts of material to be removed quickly. Milling is a very versatile process capable of producing simple two dimensional flat shapes to complex three dimensional interlaced surface configurations. 2

1

Milling Machining - Definition •At all types of milling machines, the cutting tool performs a rotational motion, that is the cutting motion. The rotation axis of the tool could be horizontal or vertical, depending on machinetool version.

• The feeding motion is achieved either by part or tool, or both, usually on three perpendicular directions. 3

Milling Machining - Definition The Milling process

4

2

Milling Machining video 1

5

Milling Machining video 2

6

3

Milling Machining video 3 Click here for animation

In Inorder orderto toperform performaa flat surface flat surface by bymilling milling operation, operation,aarelative relative motion motionhas hasto tobe be between the between themilling milling tool tooland andpart. part.In Inthis this respect respectthe themilling milling tool toolwill willhave haveaa rotation motion, rotation motion,that that isisthe themain maincutting cutting motion, motion,and andeither eitherthe the tool or part has tool or part hasto to perform performaatranslation translation motion, motion,that thatisisthe the feeding feedingmotion. motion.

Main cutting motion

Milling Tool

Machined Surface

Swarfs

Feeding motion Part

7

Milling Machine Tools - Types Horizontal Milling Machine

X axis motion

Y axis motion Z axis motion

Horizontal spindle - Designed for peripheral milling operations 8

4

Milling Machine Tools - Types Vertical Milling Machine

X axis motion

Y axis motion Z axis motion

Vertical spindle - Designed for face milling operations

9

Milling Machine Tools - Types Vertical Milling Machining center

Tool Post

10

5

Milling Machine Tools - Types Automatic Tool Change on a Vertical Milling Machining center

11

Up Milling & Down Milling Up milling

Down milling

Also called conventional milling, milling, - Wheel rotation opposite of the feed - The chip formed by each cutter tooth starts out very thin and increases its thickness - The length of the chip is relatively longer - Tool life is relatively shorter - Need more clamping force to hold the work part still.

Also called climb milling, milling, - Wheel rotation is parallel to the feed - The chip formed by each cutter tooth starts out thick and leaves out thin - The length of the chip is relatively short - Tool life is relatively longer - Need less clamping force to hold the work part still.

6

Milling Operations on a Horizontal Milling Machine
Slab milling: Cutter width extends beyond the work piece on both sides

13

Milling Operations on a Horizontal Milling Machine Slotting (Slot milling): Cutter width is less than the work piece width, creating a slot. If the cutter is very thin, it can be used to cut a work part into two, called saw milling. milling.

14

7

Milling Operations on a Horizontal Milling Machine Side milling: Cutter, machines the side of the work piece.

15

Milling Operations on a Horizontal Milling Machine Straddle milling: Similar to side milling, but cutting takes on both sides of the work part simultaneously.

16

8

Milling Operations on a Horizontal Milling Machine Form milling: The cutter has the desired form of the part

Milling of a concave half circle

Milling of a gear

17

Milling Operations on a Vertical Milling Machine Face milling: The cutter with a relatively large diameter removes a layer from from the upper side of the part

18

9

Milling Operations on a Vertical Milling Machine End milling: Cutters diameter is less than the work part’s width

19

Milling Operations on a Vertical Milling Machine Profile milling (also contouring or shaping): shaping): Outside periphery of flat part is cut

20

10

Milling Operations on a Vertical Milling Machine Pocket milling: The cutter removes material creating a cavity (rectangular, circular etc.)

21

Milling Operations on a Vertical Milling Machine 3-Dimensinal surface milling: The cutter (ball end mill) removes material, moving in 3 directions simultaneously.)

22

11

Milling Operations on a Vertical Milling Machine 3-Dimensinal surface milling:

23

Milling Operations on a Vertical Milling Machine

24

12

Milling Operations on a Vertical Milling Machine Slot milling

T-Slot milling

25

Surface Machining on a Vertical Milling Machine Horizontal flat surface Vertical flat surface

Profile surface

26

13

Milling Tools - End Mills The most common cutting tool used with a vertical mill is an end-mill, which looks like a stubby twist drill with a flattened end.

An end mill can cut into a workpiece either vertically, like a drill, or horizontally using the side of the end mill to do the cutting. This horizontal cutting operation imposes heavy lateral forces on the tool and the mill, so both must be rigidly constructed 27

Milling Tools - End Mills Flat end-mills for:: • pockets • slots • edge trim • facing

Ball-end mills make rounded pockets or spherical pockets; also fillets

Corner-rounders form rounded corners!

Conical end-mill for chamfers 28

14

Milling Tools - Drills and Reamers standard drill: will flex/walk, follow pilot stub drill for less walk/greater rigidity

center drill establishes hole position with no walk

reamers (straight or spiral) finish off hole (last several thousandths) precise hole diameter for insertion of dowel pins, bearings, etc. plunge while spinning, extract still countersink: for screw heads & deburring hole 29

Work-holding for milling operations Several types of fixtures are commonly used to hold parts while milling them. The most common is a vise. vise.

30

15

Work-holding for milling operations Another common alternative is to clamp the part directly to the machine table using clamps. Therefore all milling machine tables have T-slots along the length to allow placement of the clamps. clamps.

31

Work-holding for milling operations Another common workwork-holding method is an indexed vise, vise, which allows the part to be rotated so as to expose a different surface to the milling tool quickly.

32

16

Work-holding for milling operations Definition of part Setup If the machine tool needs to access different facets of the part to cut some shapes, then the part may need to be released and rere-fixtured. fixtured. Each fixed position is called a setup. setup. In one setup, setup, multiple tools can be used to cut different shapes, or features on the part. When the setup or tool is changed, the machinist must “locate” the part – that is, the coordinates of the part with respect to the tool must be determined. Each machine table gives feedback about the relative motion of the table along each axis (X, Y, and Z). A primary goal in every machining process is to limit to minimum the number of required part setups. 33

17