Loop-H3300-3S Series G.SHDSL Standalone Description
Features y 1-pair/2-pair/1+1 G.SHDSL mode selectable y 1 pair G.SHDSL.bis y Dying Gasp report function on 2-pair G.SHDSL Mode (manufacture option) y STU-C(master) or STU-R(slave) mode selectable y E1 (120 ohm) /T1 software configurable y Support router or bridge mode y Built in self-test, loopback and QRSS functions interface hybrid co-existence in one chassis y Local/remote management through console port, LAN, or WAN y Log-in and password security protection y VT100 Firmware Download y Support configuration upload/download y SNMP and Telnet are supported y Multi-color LED indicators y Optional front panel keys and 2-line by 16-character LCD display y Standard compliance: y G.SHDSL: ITU-T G.991.2 Annex A,B y G.SHDSL.bis: ITU-T G.991.2 Annex F
The Loop-H3300-3S is an addition to our H3300 family of CPE products that are based on the G.SHDSL transmission standard. They use the standard 16/32-TCPAM line format over twisted copper pairs to provide digital transport for a variety of data formats and data rates. The distances that this technology can span without repeaters are dependent on the data rate. Loop-H 3300-3S provides high speed transport for a T1/E1 link plus an additional Ethernet bridge, V.35 data transport over one (1) or two (2) twisted copper pairs. The H3300-3S works as a pair (as a master and a slave) or as a slave unit to the either one of the two master units: AM3440’s G.SHDSL card, H3300 rack and H3300-3S standalone. The Loop-H3300-3S can be configured as a master or slave or as the slave side of the G.SHDSL link with the other master being the AM3440’s G.SHDSL card, H3300 rack card, or H3300-3S standalone unit. The master unit is usually located in central offices and is usually a rack-mounted model. The slave unit is usually located at customer's premises and is usually a stand-alone model.
1
Ordering Information To specify options, choose from the list below. Note: RoHS compliant units are identified by the letter G appearing immediately at the end of the ordering code. Model Model Description Note (RoHS compliant) (non RoHS compliant) Loop-H3300-3C-port1-port2-port 3-sp-pp-G Loop-H3300-3E-port1-port2-port 3-sp-pp-G Loop-H3300-3C-port1-port2-port 3-MMDG-pp-G
Loop-H3300-3C-port1-port2port3-sp-pp Loop-H3300-3E-port1-port2port3-sp-pp Loop-H3300-3C-port1-port2port3-MMDG-pp
Standalone with LCD & LED display Standalone with LED display only Standalone with LCD & LED display. Support 2 pair G.shdsl mode with dying gasp
Accessories Power Cord (All power cords are RoHS compliant) Loop-ACC-PC-USA Loop-ACC-PC-EU Loop-ACC-PC-UK Loop-ACC-PC-AUS Loop-ACC-PC-CH Tray 61.000015.A00-G
AC power cord for Taiwan/America AC power cord for Europe AC power cord for UK AC power cord for Australia AC power cord for China
81.TRAY23.000-G
81.TRAY23.000
Software Loop-H3300-3S-UPGR-bis Loop-H3300-3S-UPGR-RT User’s Manual Loop-H3300-3S-UM
61.000015.A00
19" Tray (One tray for two base units) 23" Tray (One tray for two base units)
Activation code for upgrading 1-pair G.SHDSL to 1-pair G.SHDSL.bis. Only available for 1-pair G.SHDSL Activation code for upgrading bridge function to router function User’s Manual (paper, hard copy-optional). A CD version of the manual is already included as standard equipment.
Where port1 = ERJ : E1 with RJ48C BNC : E1 with BNC TRJ : T1 Note: If port1 is not required, omit the port1 field in the ordering code. port2 = 11 : V.35 with M34 Connector Note: If port2 is not required, omit the port2 field in the ordering code. port3 = BG : Bridge, also SNMP RT : Router, also Bridge, SNMP Note: If port3 is not required, omit the port3 field in the ordering code. sp= kk for 1-pair line rate Nx64K bps (G.SHDSL Annex A, B. N=3 to 36) mm for 2-pair line rate Nx64K bps (G.SHDSL Annex A, B. N=3 to 36) kb for 1-pair line rate Nx64K bps (G.SHDSL.bis Annex F. N=3 to 89) 2
pp= P1 P2
RoHS compliant Available Available
non RoHS compliant Available Available
P6 P7
Available Available
Available Available
P9
Available
Available
Description For -48 Vdc (-36 to -72 Vdc) For 100 to 240 Vac Please choose an appropriate power cord. For -48 Vdc (-36 to -72 Vdc) with sealing current looped For 100 to 240 Vac with sealing current looped (For AC, choose an appropriate power cord.) For combination of AC and DC (100 to 240 Vac and -48 Vdc (-36 to -72 Vdc) dual-feed). Please choose an appropriate power cord.
For Example:
Loop-H3300-3C-ERJ-11-kk-P9 For model H3300-3C G.SHDSL stand-alone device with LCD and LED display, E1 with RJ48C connector, V.35 with M11 connector, 1-pair line rate Nx64K bps (G.SHDSL N=3 to 36) and combination of AC and DC power (100 to 240 Vac and -48 Vdc (-36 to -72 Vdc) dual-feed).
LOOP-H3300-3S G.SHDSL PRODUCT SPECIFICATION (Standalone) WAN – G.SHDS Line Interface
Number of pairs
Connector
G.SHDSL: 1 or 2 pair G.SHDSL.bis: 1 pair 8K+N x 64 Kbps, N =3 to 36 for 1 pair or 2 pair G.SHDSL 8K+N x 64 Kbps, N =3 to 89 for 1 pair G.SHDSL.bis 16-TCPAM/32-TCPAM, full duplex with adaptive echo cancellation over unconditioned 19-26 AWG twisted pair ITU-T G.991.2 (G.SHDSL Annex A, B) and G.994.1 ITU-T G.991.2 (G.SHDSL.bis Annex F) and G.994.1 RJ48C
E1 Interface Line Rate Line Code Input Signal Framing Output Signal Input Impedance Data Rate Connector
2.048M bps ± 50 ppm HDB3, AMI ITU G.703 ITU G.704 or Unframe ITU G.703 75Ω Coax/120Ω twisted pair (jumper selectable) N x 64K bps, N =1 to 32 (2.048M bps) for 1-pair and 2-pair G.SHDSL BNC/RJ48C
T1 Interface Line Rate Line Code Input Signal Framing Output Signal Input Impedance Data Rate Connector
1.544M bps ± 32 ppm AMI / B8ZS DS1 ABAM cable length up to 655 feet D4 / ESF/ Unframe (selectable) DSX-1 100Ω twisted pair N x 64K bps, N =1 to 24 (1.536M bps) for 1-pair and 2-pair G.SHDSL RJ48C
Line rate (per pair) Line code Standard
DTE Interface Data Port Data Rate
Connector
Single DTE N x 64K bps, N =1 to 36 ( 2.304M bps) for 1-pair G.SHDSL N x 64K bps, N =1 to 36 ( 4.608M bps) for 2-pair G.SHDSL N x 64K bps, N =1 to 89 ( 5.696M bps) for 1-pair G.SHDSL.bis M34 connector for V.35 interface 3
Bridge Interface Number of Ports Physical Interface Data Rate
Connector Router Interface Number of Ports Physical Interface Supported Routing Protocol Supported Protocols Data Rate
Connector
1 10/100 Base-T N x 64K bps, N =1 to 36 ( 2.304M bps) for 1-pair G.SHDSL N x 64K bps, N =1 to 72 ( 4.608M bps) for 2-pair G.SHDSL N x 64K bps, N =1 to 89 ( 5.696M bps) for 1-pair G.SHDSL.bis RJ45 1 10/100 Base-T RIP-I, RIP-II TCP/IP, PPP, HDLC N x 64K bps, N =1 to 36 ( 2.304M bps) for 1-pair G.SHDSL N x 64K bps, N =1 to 72 ( 4.608M bps) for 2-pair G.SHDSL N x 64K bps, N =1 to 89 ( 5.696M bps) for 1-pair G.SHDSL.bis RJ45
Ethernet Bridge (BR ordering option) ․ Layer 2 protocol: HDLC, PPP, Frame Relay (up to 10 Frame Relay PVCs), Cisco compatible HDLC ․ Remote bridge support (padding/ un-padding Ethernet CRC checksum) ․ User configurable aging time ․ Up to 16K MAC Table ․ Cisco ISL packet transparent ․ VLAN packet transparent, maximum frame size 2032 bytes (IEEE 802.1Q) ․ Bridge with management IP ․ Spanning Tree Protocol/Rapid Spanning Tree Protocol (IEEE 802.1D/802.1w) ․ Bridge option can be software upgraded to Router (see Layer2, Bridge mode available for transparent bridging) IP Router (RT ordering option) ․ Static Route, RIP v1 & v2 ․ Layer 2 protocol: HDLC, PPP, Frame Relay (up to 10 Frame Relay PVCs), Cisco compatible HDLC ․ NAT/NAPT ․ Port Forwarding: Static/dynamic address/port forwarding table for NAT and NAPT DHCP ․ DHCP server support for LAN users (RFC2131, RFC2132) ․ BOOTP compatible SNTP ․ SNTP client support ․ Sync with up to 4 time servers Performance Monitor (E1/ T1) Performance Store The last 24 hours performance in 15-minute intervals and last 7 days in 24-hour summary Monitor Registers Network, E1/ T1/ DTE, and remote site Performance Reports Errored Second, Unavailable Second, Severe Errored Second Alarm Status Alarm Type, Loop1, Loop2, E1/ T1(LOS, ES, SES), and DTE Clock Loss Alarm History Contains 256 alarm records which record the latest alarm type, and date & time
4
Clock xDSL looped, Internal, or E1/ T1/ DTE Console Port Connector Electrical Protocol
DB9S at front panel RS232 interface (DCE) Menu driven VT-100 terminal
System Configuration Parameters (All in non-volatile memory) Active Configuration Current working configuration Default Configuration Manufacture default configuration Diagnostics Test xDSL Loopback DTE Loopback E1 Loopback T1 Loopback Slave Loopback Front Panel LED Indicators LCD Physical/Electrical Dimensions Power
Power Consumption Mounting Compliance ITU-T
To-DTE, To-LINE To-DTE, To-LINE To-E1, To-LINE To-T1, To-LINE DTE-Side, Line-Side (through EOC and V.54)
2-line by 16-character with keypad left arrow, right arrow, ESC, and ENTER (optional) 216 x 55 x 285 mm (WxHxD) AC module: 100 to 240 Vac -48 Vdc Module: -36 to -72 Vdc AC and DC Module: 100 to 240 Vac and -48 Vdc (-36 to -72 Vdc) Max 8 Watts without line power Desk-top stackable Rack Mount tray available
IEEE
G.991.2 (G.SHDSL Annex A, B) G.991.2 (G.SHDSL.bis Annex F) G.994.1 802.1Q, 802.1D, 802.1w
Certifictation EMI/EMC Safety
EN55022 EN60950
EN50081-1
5
EN50082-1
H3300-3S Front View
H3300-3S-Rear View
H3300-3S with AC/DC power
H3300-3S with AC power
H3300-3S with DC power
6
Application Illustrations
A
One - Loop (For G.shdsl) Line Rate: 200- 2312 Kbps E1/T1 DTE Ethernet
Loop-H3300-3S Slave
Loop-H3300-3S Master
E1/T1 DTE Ethernet
Data Rate: E1 : 2048 Kbps T1 : 1536 Kbps DTE: 2304K / 5696 Kbps
Two - Loop (For G.shdsl) Line Rate: 200-2312 Kbps E1/T1 DTE Ethernet
Loop-H3300-3S Master
Loop-H3300-3S Slave
E1/T1 DTE Ethernet
Data Rate : E1 : 2048 Kbps T1 : 1536 Kbps DTE: 4608 Kbps
LoopTelecom.com
Worldwide
LOOP TELECOMMUNICATION INTERNATIONAL, INC. ISO 9001/ISO 14001
8F, No. 8, Hsin Ann Road, Science-Based Industrial Park Hsinchu, Taiwan 30078 Tel:+886-3-578-7696 Fax:+886-3-564-6272 www.LoopTelecom.com
[email protected]
Taipei, Taiwan
6F, No. 36, Alley 38, Lane 358, Rueiguang Road, Neihu, Taiwan 11492 Tel:+886-2-2659-0399 Fax:+886-2-2659-2325
[email protected]
© 2009 Loop Telecommunication International, Inc. Version 13 31 DEC 2009
North America
8 Carrick Road Palm Beach Gardens Florida 33418, U.S.A. Tel:+1-561-627-7947 Fax:+1-561-627-6615
[email protected]
Tianjin China
No. 240 Baidi Road Nankai District Tianjin 300192 China Tel:+86-22-8789-4027 Fax:+86-22-8789-0344
[email protected]
All Rights Reserved Subject to change without notice
7