Long Island Pipe Supply, Inc

™ Long Island Pipe Supply, Inc. Everything for Fire Sprinklers Y* n e ard ,N y t i C G A* M , y inc u Q NJ , e l il stv e W Y ,N h t spe D* a M...
3 downloads 0 Views 3MB Size


Long Island Pipe Supply, Inc. Everything for Fire Sprinklers

Y*

n

e ard

,N y t i C

G

A* M , y inc u Q NJ , e l il stv e W Y ,N h t spe D* a M , M nie r u nB e l G Y y, N n a Alb T r, C o s nd Wi H ,N m le Sa NY , n y okl o r B , RI e c n de i le v ipp Pro N & ipe l P na ny o i a t Alb rna e t In rica e e l Am sda of n d a L ove ro

lG na

tio

Na

*Fabrication facilities are available.

Quality you can trust. Service you can depend on.



Long Island Pipe Supply, Inc. Everything for Fire Sprinklers Over 30 Years of Experience!

Get the products you need at the prices you want. We specialize in supplying fire sprinkler system parts from the base of the riser to the final inspector’s test. LONG ISLAND PIPE SUPPLY carries the largest selection of nationally known brands at the most competitive prices. Our friendly, dedicated staff provides outstanding service to every customer. They have the knowledge and ability to schedule the job so that you receive your order on time, every time. An exclusive distributor of many product lines, we ship domestically and world-wide from our ten strategic locations. We stock every item needed to complete any fire sprinkler system job world-wide. HEADQUARTERS: GARDEN CITY, NY BRANCHES: QUINCY, MA WESTVILLE, NJ MASPETH, NY GLEN BURNIE, MD GREEN ISLAND, NY

WINDSOR, CT SALEM, NH BROOKLYN, NY PROVIDENCE, RI

The Leader in Pipe Fabrication. Our pipe fabrication in GARDEN CITY-NY, QUINCY-MA, and GLEN BURNIE-MD can fabricate your projects, on time, at the most competitive prices. With our state of the art system we can fill and ship your order the same day!

Fabrication Services • Quoting • Cutting • Threading • Drilling • Grooving

• • • • •

Make up of fittings or hand tight Welding Labeling - Color Coding Bundling - To Contractor’s specifications Delivery with our Fleet of Trucks

JR042009vF

Notes

Long Island Pipe Supply, Inc.



GARDEN CITY (Headquarters) 586 Commercial Ave. Garden City, NY 11530 T. 516-222-8008 • F. 516-222-9234 MASPETH 58-58 56th Street Maspeth, NY 11378 T. 718-456-7877 • F. 718-456-7852

NEW JERSEY 1050 Broadway Westville, NJ 08093 T. 856-742-9000 • F. 856-742-1761

BROOKLYN 729 Hicks Street Brooklyn, NY 11231 T. 718-669-7600 • F. 718-669-7601

MARYLAND 6711 Baymeadow Drive, Suite E2 Glen Burnie, MD 21060 T. 410-787-2810 • F. 410-787-2815

MASSACHUSETTS 210 Ricciuti Drive Quincy, MA 02169 T. 617-472-4575 • F. 617-472-1612

CONNECTICUT 1220 Kennedy Road, Suite 2 Windsor, CT 06095 T. 860-688-1780 • F. 860-688-1784

NEW HAMPSHIRE 50B Northwestern Drive, Unit 6 Salem, NH 03079 T. 603-685-3200 • F. 603-685-3206

ALBANY 60 Cohoes Avenue Green Island, NY 12183 T. 518-270-2159 • F. 518-270-8384

PROVIDENCE 1195-B Broad Street Providence, RI 02905 T. 401-490-9670 • F. 401-490-6272

Saving You Time and Money Through Service!



PRODUCTS

AND

PARTNERS

Air Compressors

Jenny Compressors....................................................................25 Gast.....................................*Riser Mounted Air Compressors available

Backflows

Wilkins/Zurn.......................................................................22-23

CPVC

Ipex.....................................................................................25

Flexible Drop

Flexhead Industries...................................................................16

Grooving Tools

Pace...............................................*Roll grooving machines available

Grooved Fittings

National Grooved of America.....................................................9-12

Fire Sprinkler Accessories

Lansdale International............................................................26-45

Flows, Switches and Tampers

System Sensor......................................................................20-21

Hangers and Rods

Afcon....................................................................................14 Anvil International....................................................................13 Threaded Rod.........................................................................14 ITW Buildex............................................................................46

Nipples

Albany Pipe and Nipple................................................................8 Lansdale Nipple....................................................................15,16 Merit Manufacturing..................................................................45

Pipe Fittings

Anvil International....................................................................15 Ward Manufacturing...................................................................15

Pipe Sealant

Metacaulk...............................................................................29 Lansdale International............................................................30-32

Sprinkler Systems Devices

Reliable Automatic Sprinkler Company, Inc......................................2-7

Steel Pipe

Wheatland Tube.......................................................................17 Youngstown Tube......................................................................19 Welded Tube...........................................................................18

Test Pumps

Triple R.................................................................................44

Valves

Mueller Valve..........................................................................24 Lansdale International (*OS&Y Valves 1”-2” available).....................36-39 Milwaukee Valve......................................*Butterball 1”-2½” available

*Call your nearest branch for more information.

Visa, Mastercard and American Express Accepted. All shipping via company truck, UPS, or common carrier (our discretion). All transactions are subject to terms and conditions of Long Island Pipe Supply.

www.lipipe.com Saving You Time and Money Through Service!

1

Commercial Sprinklers Model F1FR Recessed Quick Response Sprinklers combine the durability of a standard sprinkler with the attractive low profile of a decorative sprinkler.

Upright

Pendent

Concealed Automatic Sprinklers Models G4, G4A, and G4FR The Concealer® is designed for use where aesthetic appearance is important. Offices, hospitals, motels and restaurants are but a few of the applications where it can be used. It is available in different orifice sizes allowing the designer to optimize system performance, thereby achieving a most efficient installation.

GXLO Extra Large Orifice Sprinkler SIN R2921 This model sprinkler is a center strut solder in compression extra large orifice upright sprinkler that has been designed to control high challenge fires in both palletized and rack storage occupancies utilizing relatively low water pressures. That sprinkler is available with either the standard ¾” NPT (R ¾) threads for new installations or with ½” NPT (R ½) threads for retrofit applications. Offers opportunity for: • Pipe size reduction • Fewer sprinklers • Elimination of booster pumps • Increasing densities with existing systems • ½” NPT (R ½) available for retrofit installations only • Includes additional Specific Application listing

2

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

Model F1 Res 49 CCP Pendent (Concealed) Model F1 Residential Pendent Sprinklers are fast response sprinklers combining excellent durability, high sensitivity glass-bulb and low profile decorative design. The 3mm glassbulb pendent sprinklers with a K factor of 4.9 permit the efficient use of residential water supplies for sprinkler coverage in residential fire protection design. The low flow F1 Residential Sprinklers are specially engineered for fast thermal response to meet the sensitive fire protection application needs of the latest residential market standards [UL 1626]. Standard cover plate finish: [White] [Custom Color-specify]

Model F1 Res 44 SWC Horizontal Sidewall Sprinkler Model F1 Residential Sidewall Sprinklers are fast response sprinklers combining excellent durability, high sensitivity glass-bulb and low profile decorative design. The 3mm glassbulb sidewall sprinklers with a K factor of 4.4 permit the efficient use of residential water supplies for sprinkler coverage in residential fire protection design. The low flow F1 Residential Sprinklers are specially engineered for fast thermal response to meet the sensitive fire protection application needs of the latest residential market standards [UL 1626]. Standard finish: [Bronze] [Chrome-plated] [White Polyester] [Special finish-specify]

Residential Sprinklers Residential Pendent and concealed Horizontal Sidewall Sprinklers are fast response sprinklers combining excellent durability, high sensitivity glass-bulb and low profile decorative design. The 3mm glass-bulb pendent sprinklers, with a K-factor of 4.9 permit the efficient use of residential water supplies for sprinkler coverage in residential fire protection design.

www.lipipe.com Saving You Time and Money Through Service!

3

Model E Alarm Check Valve The Model E Alarm Check Valve acts as the water flow alarm device in wet pipe sprinkler systems. The design allows for installation under both variable and constant supply pressure conditions. When water flows in the sprinkler system due to the operation of one or more Automatic Fire Sprinklers, the Alarm Valve opens, allowing continuous flow of water into the system and transmittal of an alarm, both electrically and mechanically.

Model E3 High Pressure Alarm Check Valve The Reliable Model E3 Alarm Valve activates the water flow alarm device in wet pipe sprinkler systems. The design allows for installation under both variable and constant supply pressure conditions. When water flows in the sprinkler system due to the operation of one or more automatic fire sprinklers, the alarm valve opens, allowing continuous flow of water into the system and transmittal of water pressure to electrical and/or mechanical water flow alarm devices.

Model D Dry Pipe The Reliable Model D Dry Pipe Valve makes possible the installation of Automatic Sprinkler Systems in buildings in which freezing temperatures prevail. This type of system is called the Dry System, has air under pressure instead of water in the piping above the Dry Pipe Valve. When one or more Automatic Sprinklers operate due to fire, the air pressure in the system is reduced - the Dry Pipe Valve opens and water under pressure flows in the activated Sprinkler(s) and is then distributed on the fire.

DDX Valves for Deluge, Preaction and Dry System Intallations • • • • • • • • • • • • •

4

250 psi (17.2 bar). Extremely lightweight - weighs 50% less than the BX Valve. Both ends grooved. A 3:1 releasing ratio with a latched open clapper. No PORV. System side check valve not required. Only one main drain. External reset. No priming water is required for preaction or dry. The DDX LP dry system uses the same low pressure as the LDX. Dry systems may be hydrostatically tested with the clapper closed. Quick installing segmented (preassembled) trim or loose trim. Contractor tested and contractor tough. cULus Listed and FM Approved for deluge, preaction and dry.

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

Prepak Systems 707D Complete System includes: • Single or double Interlock Preaction System with a simple code change on the programmable panel. • 7 to 10 psi air pressure range. • Tank mounted air compressor and air maintenance device. • Potter PFC-4410 releasing panel. • Five initiating appliance circuits. • Alarm, supervisory and trouble relays. • Designed, manufactured, assembled and tested by Reliable in the USA. • UL/cUL Listed as a unit.

Complete Deluge and Preaction Systems • • • • • •

Lower friction loss. External reset. Drain manifold with one outlet. One part number. One part system. Easy to install. Trim parts and piping included. Easy to maintain. Six bolts to remove cover.

1½” Preaction System • • • • •

Completely assembled. Electrically activated. One part number. One part system. Single or Double Interlock Preaction. Complete with monitored isolating control valve and pressure alarm switch.

Floor Control Valve

Residential and Commercial Riser Manifolds • • • • • •

1½” (40mm) - 8” (200mm). 1½” (40mm) - 2” (50mm) threaded, 2” (50mm) - 8” (200mm) grooved both ends. 300 psi (20.7 bar) rated for grooved manifolds, 250 psi (17.2) bar for threaded. Configurations for test and drain, pressure relief, etc. Packaged to provide component protection. cULus Listed and FM Approved.

Commercial Riser

www.lipipe.com Saving You Time and Money Through Service!

5

6

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

www.lipipe.com Saving You Time and Money Through Service!

7

ALBANY PIPE & NIPPLE Home of Landsdale Nipple

Albany Pipe & Nipple, located just outside of Albany, NY is a full line manufacturer of steel pipe nipples. The company’s roots go back over 50 years to the Lansdale Nipple Company located in Eastern Pennsylvania which moved to the Albany area in 2001 under its new name and ownership. Albany Pipe & Nipple’s strength lies in its ability to meet customer needs in a timely fashion and “specials” are standard. Threaded, grooved or plain ends are available in any length or finish that may be required. Only domestic pipe is used at Albany Pipe & Nipple so you can be sure that you are buying a domestic nipple from a quality manufacturer.

Made in the USA! • Black Standard Weight Nipples Nominal Pipe Size: 1⁄8” - 8” Nominal Length: Close - 12”

• Black Extra Long Nipples Nominal Pipe Size: 1⁄8” - 2” Nominal Length: 18” - 72”

• Galvanized Standard Weight Nipples Nominal Pipe Size: 1⁄8” - 8” Nominal Length: Close - 12”

• Galvanized Extra Long Nipples Nominal Pipe Size: 1⁄8” - 2” Nominal Length: 18” - 72”

• Right and Left Nipples Nominal Pipe Size: 1⁄8” - 4” Nominal Length: 4” & 6”

• Butt Nipples Nominal Pipe Size: 1⁄8” - 4”

• Tank Nipples Nominal Pipe Size: 1⁄8” - 2”

• Grooved Nipples Nominal Pipe Size: 1¼” - 10” Black & Galvanized Available. Lengths as specified.

• Custom Nipples Any length as specified.

8

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

Rigid Coupling - Style 5 Sizes Available: 1”-12” • Provides joint rigidity for the support and hanging requirements of ANSI B31.1. Power Piping Code; ANSI B31.9, Building Service Pipe Code; and NFPA 13, Sprinkler Sysetms. • Comes standard with a 100% inspected Grade E EPDM gasket. • Housings are made of ductile iron conforming to ASTM A-536. • Every lot is metallurgically examined to insure compliance. • Nuts and bolts are heat treated and conform to the requirements of ASTM A-183 or A-449 • Available with a hot dipped galvanized coating. • cULus Listed and FM Approved for various pipe schedules.

Flexible Coupling - Style 12 Sizes Available: 1”-8” • Provides joint flexibility required in some piping systems. • Conforms to the requirements of ANSI B31.1 Power Piping Code; ANSI B31.9 Building Service Pipe Code and NFPA 13 Sprinkler Systems. • Provided with EPDM rubber gasket as standard, suitable for 30˚ to 203˚F (-1˚ to 110˚C). • Housings are made of ductile iron conforming to ASTM A-536. • Nuts and bolts are heat treated and conform to the requirements of ASTM A-194 or A-449 • Available with a hot dipped galvanized coating. • Most economical design for low pressure applications. • cULus Listed and FM Approved for various pipe schedules.

Reducing Grooved Coupling - Style 25 • Replaces two couplings and an in-line reducer (concentric or eccentric). • Comes standard with a 100% inspected Grade E EPDM gasket. Other gasket types are available. • Housings are made of ductile iron conforming to ASTM A-536. • Every lot is metallurgically examined to insure compliance. • Nuts and bolts are heat treated and conform to the requirements of ASTM A-194 or A-449 • Available with a hot dipped galvanized coating. • cULus Listed and FM Approved for various pipe schedules.

2” x 1½” 2½” x 2” 3” x 2” 3” x 2½” 4” x 2”

www.lipipe.com Saving You Time and Money Through Service!

4” x 2½” 4” x 3” 6” x 4” 8” x 6”

9

Groove to Flange Adapter - Style 14 Sizes Available: 2”-12” • • • • •

Designed to connect ANSI Class 125 or 150 flanged components to a grooved piping system. Made of ductile iron conforming to ASTM A-536. Every lot is metallurgically examined to insure compliance. Available with hot dipped galvanized coating. cULus Listed and FM Approved.

Short Radius Grooved Fittings

Styles F105, F106, F107, F135, and F155 Sizes Available: 1¼”-8” • • • • • • •

Sized for Schedule 7, 10, 30, and 40 pipe which improves flow. Designed for short center to end dimensions. Easier installation in less space. Rated for 300 psi operation, with a 5 to 1 safety factor. Made of durable, high strength ductile iron conforming to ASTM A-536. Every lot is metallurgically examined to insure compliance. Available with hot dipped galvanized coating. cULus Listed and FM Approved.

Pipe Size 1¼” 1½” 2” 2½” 3” 4” 5” 6” 8”

F105

10

Max. Rated Pres. (psi) 300 300 300 300 300 300 300 300 300

90˚ Elbow - F105 C-E (In.) Wt. (Lbs.) 2.25 0.9 2.50 1.1 2.75 1.3 3.00 2.0 3.38 2.6 4.00 5.1 4.88 6.8 5.50 12.8 6.80 22.7

F106

45˚ Elbow - F106 C-E (In.) Wt. (Lbs.) 1.75 0.5 1.75 0.9 2.00 1.1 2.25 1.8 2.00 2.2 2.25 4.0 2.50 6.4 2.90 9.3 3.25 16.3

F107

Equal Tee - F107 C-E (In.) Wt. (Lbs.) 2.25 1.0 2.50 1.5 2.75 1.9 3.00 2.6 3.38 4.2 4.00 6.6 4.88 9.0 5.50 20.9 6.95 32.9

F135

Cross - F135 C-E (In.) Wt. (Lbs.) 2.75 2.2 3.00 3.3 3.38 5.1 4.00 7.5 4.88 13.7 5.50 19.7 6.80 34.4

F155

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

Mechanical Tee - Style 15 & Style 16 Style 15 Grooved & Style 16 Threaded Mechanical Tee provides a direct branch connection at any location along the pipe run without welding. A hole cut along the center line of pipe will receive the hole locator collar to secure the outlet. A pressure responsive gasket molded to suit the run pipe insures leak tight joint. Cross type connections can be made utilizing upper housings only. • Available with a hot dipped galvanized coating. • cULus Listed and FM Approved. Run Size (In.)

2



3

4

5

6

8

Outlet Size (In.)

Max Working Pressure (psi)*

½ ¾

Hole Diameter

Dimensions (In.)

Hole Saw (in.)

Max Perm. (In.)

Grvd.

Thrd.

A

A

300

1.50

1.63

-

300

1.50

1.63

-

1

300

1.50

1.63



300

1.75



300

1.75

½

300

¾

Style 15

B

C

D

2.79

4.62

2.87

1.57

2.79

4.62

2.87

1.57

-

2.79

4.62

2.87

1.57

1.81

2.79

2.79

4.62

2.87

1.57

1.81

2.79

2.79

4.62

2.87

1.57

1.50

1.63

-

3.16

5.70

3.44

1.83

300

1.50

1.63

-

3.16

5.70

3.44

1.83

1

300

1.50

1.63

-

3.16

5.70

3.44

1.83



300

2.00

2.13

3.16

3.16

5.70

3.44

1.83



300

2.00

2.13

3.16

3.16

5.70

3.44

1.83

½

300

1.50

1.63

-

3.38

6.25

3.74

2.13

¾

300

1.50

1.63

-

3.38

6.25

3.74

2.13

1

300

1.50

1.63

-

3.38

6.25

3.74

2.13



300

2.00

2.13

3.38

3.38

6.25

3.74

2.13



300

2.00

2.13

3.38

3.38

6.25

3.74

2.13

2

300

2.50

2.63

3.50

3.50

6.25

3.87

2.13

½

300

1.50

1.63

-

3.99

7.25

3.74

2.63

¾

300

1.50

1.63

-

3.99

7.25

3.74

2.63

1

300

1.50

1.63

-

3.99

7.25

3.74

2.63



300

2.00

2.13

3.99

3.99

7.25

3.74

2.63



300

2.00

2.13

3.99

3.99

7.25

3.74

2.63

2

300

2.50

2.63

3.99

3.99

7.25

4.37

2.63



300

2.75

2.88

3.99

3.99

7.25

4.37

2.63

3

300

3.50

3.63

4.50

4.50

7.25

5.11

2.63



300

2.00

2.13

4.81

4.81

8.37

3.74

3.16



300

2.00

2.13

4.81

4.81

8.37

3.74

3.16

2

300

2.50

2.63

4.81

4.81

8.37

4.37

3.16



300

2.75

2.88

4.81

4.81

8.37

4.67

3.16

3

300

3.50

3.63

5.05

5.05

8.37

5.11

3.16



300

2.00

2.13

5.13

5.13

9.37

3.74

3.70



300

2.00

2.13

5.13

5.13

9.37

3.74

3.70

2

300

2.50

2.63

5.13

5.13

9.37

4.37

3.70



300

2.75

2.88

5.13

5.13

9.37

4.67

3.70

3

300

3.50

3.63

5.50

5.50

9.37

5.18

3.70

4

300

4.50

4.63

5.76

5.76

9.37

6.28

3.70

2

300

2.50

2.63

6.31

6.31

12.00

4.37

4.71



300

2.75

2.88

6.31

6.31

12.00

4.37

4.71

3

300

3.50

3.63

6.31

6.56

12.00

5.18

4.71

4

300

4.50

4.63

6.31

6.31

12.00

6.28

4.71

www.lipipe.com Saving You Time and Money Through Service!

Style 16

Style St l 15

Style St l 16

11

Standard Grooved Fittings

Styles F100, F101, F102, F103, and F110 Sizes Available: 1¼”-12” • • • • •

All fittings are full flow design. Made of durable, high strength ductile iron conforming to ASTM A-536. Every lot is metallurgically examined to insure compliance. Available with hot dipped galvanized coating. cULus Listed and FM Approved.

F100

F101

F102

F103

F110

Standard Reducer Tee Styles 115 Sizes Available: 2”-12” • • • • •

All fittings are full flow design. Made of durable, high strength ductile iron conforming to ASTM A-536. Every lot is metallurgically examined to insure compliance. Available with hot dipped galvanized coating. cULus Listed and FM Approved.

Standard Concentric Reducer

Styles 140 Sizes Available: 1¼” x 1”-12” x 10” • • • • •

All fittings are full flow design. Made of durable, high strength ductile iron conforming to ASTM A-536. Every lot is metallurgically examined to insure compliance. Available with hot dipped galvanized coating. cULus Listed and FM Approved.

Drain Elbow

Styles F105D Sizes Available: 2” x 1” - 6” x 1” • • • • • • •

12

Provides a 1” NPT drain required on some fire protection standpipes. Smoother flow than fabricated segmented steel elbows. Made of durable, high strength ductile iron conforming to ASTM A-536. Every lot is metallurgically examined to insure compliance. Available with hot dipped galvanized coating. Rated for 300 psi operation, with a 5 to 1 safety factor. cULus Listed and FM Approved.

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

Clevis Hangers • • • • •

Designed for suspending light stationary pipe. Allows for vertical adjustment. Approved for ¾” thru 4” Complies with Fed. Spec. WW-H-171E Type 12. cULus Listed and FM Approved.

Material: Steel Finish: Plain, Electro-Plated, or Copper

Riser Clamp • Designed for supporting and stabilizing vertical pipe runs. Clamp is fitted for steel pipe and peferably installed below a coupling or shear lugs. • Allows for vertical adjustment. • Approved for ¾” thru 8” • Complies with Fed. Spec. WW-H-171E Type 8. • cULus Listed and FM Approved. Material: Steel Finish: Plain, Galvanized, Electro-Plated or Copper

Split Ring Hanger • Designed for suspending non-insulated pipe horizontally. • Complies with Fed. Spec. WW-H-171E Type 25. Material: Malleable Iron Finish: Plain, Electro-Plated or Copper

Adjustable Swivel Ring Band Hanger • Designed for suspending insulated pipe (with shield) or non-insulated pipe allowing for vertical adjustments. • Approved for ½” thru 4” • Complies with National Fire Protection Association Code (NFPA). • cULus Listed and FM Approved. Material: Steel Material: Finish: Pre-Galvanized or Copper

Part # 2100-1380 2100-1390 2100-0370 2100-0380 2100-0390 2100-0400 2100-0410 2100-0420 2100-0430

Pipe Size ½” ¾” 1” 1¼” 1½” 2” 2½” 3” 4”

Part # 2100-0110 2100-0100 2100-0090 2100-0140 2100-0150 2100-0160 2100-0170 2100-0070 2100-0180 2100-0080

Part # 2100-1220 2100-1230 2100-1240 2100-1250 2100-1260 2100-1270 2100-1280 2100-1290 2100-1300

Part # 2100-0832 2100-0830 2100-0730 2100-0750 2100-0740 2100-0760 2100-0770 2100-0780 2100-0790 2100-0800 2100-0810 2100-0820

Rod Size ‘A’ 3⁄8” - 16 3⁄8” - 16 3⁄8” - 16 3⁄8” - 16 3⁄8” - 16 3⁄8” - 16 ½” - 13 ½” - 13 ½” - 13

Pipe Size 1” 1¼” 1½” 2” 2½” 3” 3½” 4” 5” 6”

Pipe Size ½” ¾” 1” 1¼” 1½” 2” 2½” 3” 4”

Pipe Size ½” ¾” 1” 1¼” 1½” 2” 2½” 3” 4” 5” 6” 8”

Rod Size ‘A’ 3⁄8” - 16 3⁄8” - 16 3⁄8” - 16 3⁄8” - 16 3⁄8” - 16 3⁄8” - 16 ½” - 13 ½” - 13 ½” - 13

Rod Size ‘A’ 3⁄8” - 16 3⁄8” - 16 3⁄8” - 16 3⁄8” - 16 3⁄8” - 16 3⁄8” - 16 3⁄8” - 16 3⁄8” - 16 3⁄8” - 16 ½” - 13 ½” - 13 ½” - 13

www.lipipe.com Saving You Time and Money Through Service!

13

Continuous Threaded Rod Sizes Available: 3⁄8” through 7⁄8” Part # 2100-1380 2100-1390 2100-0370 2100-0380 2100-0400 2100-0390 2100-0420 2100-0410

• Stocked in 6’ and 10’ lengths. Other even foot lengths can be furnished to order.

Rod Size 3⁄8” x 6’ 3⁄8” x 10’ ½” x 6’ 5⁄8” x 6’ ¾” x 6’ 7⁄8” x 6’ 3⁄8” x 6’ Cad Plated ½” x 6’ Cad Plated

Material: Carbon steel; rod threaded complete length Material: Finish:: Plain or Galvanized Finish

Afcon Seismic Sway Bracing Seismic Group

001/020 Sway Brace (Model E)

070 Attachment End (Threaded)

076 Universal Locking Attachment End

077 Attachment End (Locking)

079 4-Way Sway Brace Attachment

085 Sway Brace Adapter Steel Web Post

509 Nail Plate

510 Pipe/CPVC Hanger

Restraint Group 162 Universal Restraining Strap

514 Offset-Pipe/CPVC Hanger/Restrainer

CPVC Hanger Group

030/040 Sway Brace (Model K)

300 Ring Hanger

310 Surge Restrainer

508 Nail Plate

511 Pipe/CPVC Hanger Side Mount

512 Pipe/CPVC Hanger Single Fastener

514 Offset Pipe/CPVC Hanger/Restrainer

515 CPVC Hanger Double Offset

14

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

Cast Iron Threaded Fittings Standard Class 125 Specifications • • • •

ANSI B1.20.1, Threads, B16.4, Dimensions, Pressure Rating. ASTM A126, Material. A153, Galvanizing. Federal Specification WW-P-501. Pressure Ratings: 125 psi - Saturated Steam 175 psi - at 150˚ W.O.G. • cULus Listed and FM Approved.

Malleable Threaded Fittings Standard Class 150 Specifications • • • •

ANSI B1.20.1, Threads, B16.4, Dimensions, Pressure Rating. ASTM A197, Material. A153, Galvanizing. Federal Specification WW-P-521. Pressure Ratings: 150 psi - Saturated Steam 300 psi - at 150˚ W.O.G. • cULus Listed and FM Approved.

Plug and Bushing Fittings Standard Class 150 Specifications • • • • • •

ANSI B1.20.1, Threads, B16.4, Dimensions, Pressure Rating. ASTM A197 (Malleable), A126 (Cast), A153, Galvanizing. ANSI B16.1 Dimensions, Pressure Rating. ASTM A126 Material. Federal Specification WW-P-471 and WW-F-406. Pressure Ratings (Malleable): 150 psi - Saturated Steam 300 psi - at 150˚ W.O.G. • Pressure Ratings (Cast): 125 psi - Saturated Steam 175 psi - at 150˚ W.O.G. • cULus Listed and FM Approved.

Black Steel Nipples Black Welded Steel Nipples Sch.40 A53 ½” to 4”

Galvanized Steel Nipples Galvanized Welded Steel Nipples Sch.40 A53

NOTE: Special sizes available upon request. www.lipipe.com Saving You Time and Money Through Service!

15

Pre-Cut Pipe

Black Galvanized Weld Steel Pipe Sch. 40 from 13” to 120” • Welded steel nipples (A53 Type F or Type E) are available in standard and extra strong sizes 1⁄8” - 8” NPS, right hand threads, black or galvanized. • Nipples are available from stock 1⁄8” - 8” NPS diameter, close to 12” NPS in length. • Sizes 13” - 24” NPS (Prices on application). • Steel Pipe Nipples meet ASTM A733 and Federal Specification WW-N-351.

Tapered Pipe Thread (NPT)

Grooved

www.lansdalenipple.com Straight Pipe Thread

Reamed and Chamfered

Flexible Drop

Sizes Available: ½” and ¾” threads and 2’, 3’, 4’, 5’, and 6’ hose lengths • • • • • • • • • • •

More cost effective than hard pipe. High quality proven design. Increased efficiency increases contractor profits. Relocate and configure without draining or disassembling system. Made in USA, superior quality. Complete, leak-tested system. No call-backs. Retrofit existing buildings in confined space. Seismically qualified. FM Approved for Cleanroom sprinkler installation. cULus Listed and FM Approved.

Seismically Qualified FlexHead Industries is the only manufacturer to meet seismic qualification testing pursuant to AC156, “Seismic Qualification Testing of Nonstructural Components”. The testing was conducted by the Department of Civil, Structural and Environmental Engineering, at the State University of New York (SUNY). FlexHead products are in compliance with FM and UL standards and are installed in properties ranging from hotels to office buildings, new construction and retrofits. FlexHead fire sprinkler connections provide characteristics that exceed the most stringent seismic code requirements allowing for independent movement between sub-mains and ceilings. FlexHead connections have tested this system at SUNY and are qualified for use in Seismic Design Categories C, D, E and F. The FlexHead connections also meet all International Building Code requirements without needing an unsightly oversized ring, sleeve or adaptor where the ceiling meets the sprinkler head. FlexHead connections are FM-approved and UL-listed, having passed rigorous tests for hydrostatic pressure, vibration, friction loss, fatigue, head deployment, corrosion and water hammer. Every hose is leak-checked at the factory. Their burst pressure exceeds 3,000 pounds and compatible with every sprinkler head on the market.

16

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

Schedule 40 Product NPS 1” 1¼” 1½” 2”

Schedule 10 Product NPS 1¼” 1½” 2” 2½” 3” 4” 5” 6”

ASTM A-795-E - Standard weight pipe. UL Listed and FM Approved. Clean, durable coating.

Nominal I.D. 1.049” 1.380” 1.610” 2.067”

Wt./Ft. Lbs. 1.681 2.275 2.720 3.656

Wt./Ft. H2O Filled 2.055 2.922 3.602 5.109

Pieces Per Lift 70 51 44 30

Wt./Lift 21’ 2,471 2,437 2,513 2,303

Wt./Lift 24’ 2,824 2,785 2,872 2,632

Wt./Lift 25’ 2,942 2,901 2,992 2,742

ASTM A-135 - Standard weight pipe. UL Listed and FM Approved. Clean, durable coating.

Nominal I.D. 1.442” 1.682” 2.157” 2.635” 3.260” 4.260” 5.295” 6.357”

Wt./Ft. Lbs. 1.807 2.087 2.640 3.534 4.336 5.619 7.780 9.298

Wt./Ft. H2O Filled 2.514 3.049 4.222 5.895 7.949 11.789 17.309 23.038

Pieces Per Lift 61 61 37 30 19 19 13 10

Wt./Lift 21’ 2,315 2,673 2,051 2,226 1,730 2,242 2,124 1,953

Wt./Lift 24’ 2,654 3,055 2,344 2,544 1,977 2,562 2,427 2,232

Wt./Lift 25’ 2,756 3,183 2,442 2,651 2,060 2,669 2,529 2,325

WLS Schedule 30 ASTM A-795-F - Schedule 30 lightwall threadable. UL Listed and FM Approved. Available black and galvanized. Product NPS 1” 1¼” 1½” 2”

Nominal I.D. 1.087” 1.426” 1.650” 2.125”

Wt./Ft. Lbs. 1.462 1.928 2.370 3.004

Wt./Ft. H2O Filled 1.865 2.621 3.297 4.542

Pieces Per 21’ 1 Ton Lift 70 55 45 35

Pieces Per 25’ 1 Ton Lift 60 45 40 30

A-53 Schedule 40

ASTM A-53 - Standard weight Schedule 40. UL Listed and FM Approved. Available black and galvanized.

Product NPS 1” 1¼” 1½” 2” 2½” 3” 4” 5” 6”

Nominal I.D. 1.049” 1.380” 1.610” 2.067” 2.469” 3.068” 4.026” 5.047” 6.065”

Wt./Ft. Lbs. 1.681 2.275 2.720 3.656 5.798 7.583 10.800 14.631 18.992

Wt./Ft. H2O Filled 2.055 2.922 3.602 5.109 7.871 10.783 16.311 23.262 31.498

Pieces Per 21’ 1 Ton Lift 65 48 39 28 18 14 10 7 5

Pieces Per 25’ 1 Ton Lift 55 40 35 25 -

Warning: Schedule 10 pipe can not be threaded or cut-grooved!

www.lipipe.com Saving You Time and Money Through Service!

17

WELDED TUBE OF CANADA Berkeley, SC Made In The U.S.A.

Schedule 10 Nominal Size 1¼” 1½” 2” 2½” 3” 4”

Lightwall Sprinkler Pipe.

Nominal O.D. 1.660” 1.900” 2.375” 2.875” 3.500” 4.500”

Nominal I.D. 1.422” 1.682” 2.157” 2.635” 3.260” 4.260”

Nominal Wall 0.109” 0.109” 0.109” 0.120” 0.120” 0.120”

Lift Count 61 61 37 37 19 19

Lbs. Per Foot 1.81 2.09 2.64 3.54 4.34 5.62

21’ Lift Feet 1,281 1,281 777 777 399 399

21’ Lift Lbs. 2,319 2,677 2,051 2,751 1,732 2,242

Nominal O.D. 1.660” 1.900” 2.375” 2.875” 3.500” 4.500”

Nominal I.D. 1.512” 1.734” 2.209” 2.709” 3.334” 4.310”

Nominal Wall 0.074” 0.083” 0.083” 0.083” 0.090” 0.105”

Lift Count 61 61 37 37 19 19

Lbs. Per Foot 1.25 1.61 2.03 2.48 3.28 4.93

21’ Lift Feet 1,281 1,281 777 777 399 399

21’ Lift Lbs. 1,601 2,062 1,577 1,927 1,309 1,967

Nominal Wall 0.133” 0.140” 0.145” 0.154”

Lift Count 61 61 61 37

Lbs. Per Foot 1.68 2.28 2.72 3.66

21’ Lift Feet 1,281 1,281 1,281 777

21’ Lift Lbs. 2,152 2,921 3,484 2,844

Lift Count 61 61 61 37

Lbs. Per Foot 1.49 2.01 2.41 3.22

21’ Lift Feet 1,281 1,281 1,281 777

21’ Lift Lbs. 1,909 2,575 3,087 2,502

Schedule 7 Nominal Size 1¼” 1½” 2” 2½” 3” 4”

Schedule 40 Nominal Size 1” 1¼” 1½” 2”

Schedule 30 Nominal Size 1” 1¼” 1½” 2”

Standard Weight Sprinkler Pipe.

Nominal O.D. 1.315” 1.660” 1.900” 2.375”

Nominal I.D. 1.049” 1.380” 1.610” 2.067”

Threadable Lightwall Sprinkler Pipe.

Nominal O.D. 1.292” 1.637” 1.877” 2.352”

Nominal I.D. 1.054” 1.389” 1.619” 2.080”

Nominal Wall 0.119” 0.124” 0.129” 0.136”

Warning: Schedule 7 and Schedule 10 pipe can not be threaded or cut-grooved! **Berkeley also stocks additional sprinkler pipe in 6” and 8” sizes.

18

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

Youngstown Tube Youngstown Tube

Hot-Dipped Galvanized Sprinkler Pipe Schedule 10 Sprinkler Pipe “Hot Dipped Galvanized” Nominal Pipe Size 1¼” 1½” 2” 2½” 3” 4” 6”

Nominal O.D. 1.660” 1.900” 2.375” 2.875” 3.500” 4.500” 6.625”

Nominal Wall .109” .109” .109” .120” .120” .120” .134”

Lbs. Per Foot 1.92 2.20 2.79 3.72 4.56 5.90 9.72

Standard Length 21’ 21’ 21’ 21’ 21’ 21’ 21’

Pieces Per Bundle 61 44 37 37 24 19 10

Feet Per Bundle 1,281 924 777 777 504 399 210

Weight Per Bundle 2,454 2,035 2,170 2,887 2,298 2,355 2,042

Pieces Per Bundle 61 61 44 37

Feet Per Bundle 1,281 1,281 924 777

Weight Per Bundle 2,256 3,040 2,624 2,954

Warning: Schedule 10 pipe can not be threaded or cut-grooved!

Schedule 40 Sprinkler Pipe “Hot Dipped Galvanized” Nominal Pipe Size 1” 1¼” 1½” 2”

Nominal O.D. 1.315” 1.660” 1.900” 2.375”

Nominal Wall .133” .140” .145” .154”

Lbs. Per Foot 1.76 2.37 2.84 3.80

Standard Length 21’ 21’ 21’ 21’

Schedule 40 Sprinkler Pipe Schedule 40 Sprinkler Pipe Nominal Pipe Size 1” 1¼” 1½” 2”

Nominal O.D. 1.315” 1.660” 1.900” 2.375”

Nominal Wall .133” .140” .145” .154”

Lbs. Per Foot 1.68 2.27 2.72 3.65

Standard Length 21’ 21’ 21’ 21’

Pieces Per Bundle 61 61 44 37

Feet Per Bundle 1,281 1,281 924 777

Weight Per Bundle 2,152 2,907 2,511 2,836

UL Threaded CRR 1.00 1.00 1.00 1.00

EZ-Thread™ Sprinkler Pipe Schedule 30 Sprinkler Pipe “EZ-Thread™” Nominal Pipe Size 1” 1¼” 1½” 2”

Nominal O.D. 1.295” 1.645” 1.892” 2.368”

Nominal I.D. 1.095” 1.420” 1.653” 2.116”

Nominal Wall .106” .114” .121” .127”

Lbs. Per Foot 1.34 1.86 2.28 3.03

Standard Length 21’ 21’ 21’ 21’

Pieces Per Bundle 61 61 44 37

Feet Per Bundle 1,281 1,281 924 777

Weight Per Bundle 1,716 2,382 2,106 2,354

UL Threaded CRR 1.14 1.12 1.06 1.11

Schedule 10 Sprinkler Pipe Schedule 10 Sprinkler Pipe Nominal Pipe Size 1¼” 1½” 2” 2½” 3” 4” 6” 8”**

Nominal O.D. 1.660” 1.900” 2.375” 2.875” 3.500” 4.500” 6.625” 8.625”

Nominal Wall .109” .109” .109” .120” .120” .120” .134” .188”

Lbs. Per Foot 1.92 2.20 2.79 3.72 4.56 5.90 9.72 18.49

Standard Length 21’ 21’ 21’ 21’ 21’ 21’ 21’ 21’

Pieces Per Bundle 61 44 37 37 24 19 10 7

Feet Per Bundle 1,281 924 777 777 504 399 210 147

Weight Per Bundle 2,319 1,921 2,051 2,742 2,182 2,238 1,951 2,424

UL Threaded CRR 8.5 6.8 5.5 4.1 3.0 1.8 1.16 1.81

Warning: Schedule 10 pipe can not be threaded or cut-grooved! **8” Schedule 10 is manufactured from a different domestic supplier.

www.lipipe.com Saving You Time and Money Through Service!

19

Supervisory Switches Our supervisory switches are available in a variety of configurations to accomodate outside screw and yoke, post indicator, butterfly, rising and non-rising stem gate, ball and angle valves. • Simplified installation. • Tamper resistant. • UL listed for indoor/outdoor applications.

Model OSY2 PIBV2 PSP1

Description For outside screw and yoke valve with pre-installed bracket For post indicator/butterfly valve Plug-in special purpose switch

Waterflow Switches The System Sensor WFD Series vane-type waterflow detector, with a computer designed paddle, fits Schedule 10 through Schedule 40 steel pipe sizes 1” thru 8”. The design of this unit makes it easy to install and simple to maintain. It can be mounted in a vertical or horizontal position and is suitable for indoor and UL listed outdoor wet-pipe sprinkler installations. Switch assembly and delay mechanism assembly are field replaceable. • 450 psi pressure rated. • Visual switch activation. • NEMA4 rated. • Durable metal enclosure. • Sealed retard mechanism. • cULus listed, FM and MEA approved. Model WFS1Q

WFD20 WFD25 WFD30-2 WFD35 WFD40 WFD50 WFD60 WFD80

20

Description Fits 1”, 1¼”, 1½” ferrous and brass threaded tees; 1”, 1¼”, 1½”, 2” copper sweat tees; 1” CPVC tees; 1½” polybutylene tees. Now includes paddles for 1” Central Sprinkler, Spears®, and Victaulic® brand CPVC tees. Size 2”/50mm 2½”/65mm 3”/80mm 3½”/90mm 4”/100mm 5”/130mm 6”/150mm 8”/200mm

Hole 1¼” 1¼” 2” 1¼” 2” 2” 2” 2”

Schedule Schedule 10/40 Schedule 10/40 Schedule 10/40 Schedule 10/40 Schedule 10/40 Schedule 10/40 Schedule 10/40 Schedule 10/40

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

Pressure Switches Supervising air presure in pipes and pressure tanks is achieved by our EPS pressure switches. They are also used for detecting activation of automatic water control valves. • Alarm and supervisory models. • Sensitivity adjustment wheel. • Bellows activated. • No special tools required. • cULus listed, FM and MEA approved. Model EPS10-1 EPS10-2 EPS40-1 EPS40-2

Description Alarm Pressure Switch Alarm Pressure Switch Low pressure supervisory High/low pressure supervisory

SPDT Switches 1 switch 2 switches 1 switch 2 switches

Pressure Range 4 to 20 psi 4 to 20 psi 10 to 100 psi 10 to 100 psi

Electric Bells and Bell Back Boxes System Sensor’s SSM/SSV series bells are low current, high decibel notification appliances for use in fire and burglary systems or other signaling applications. • Comes pre-wired to reduce installation time. • Mounts directly to standard 4” square electrical box. • Approved for indoor and outdoor use. • UL listed, FM and MEA approved. Model SSV120-6 SSV120-8 SSV120-10 SSM24-6 SSM24-8 SSM24-10 WBB

Description 6-inch Alarm Bell 8-inch Alarm Bell 10-inch Alarm Bell 6-inch Alarm Bell 8-inch Alarm Bell 10-inch Alarm Bell Weatherproof Back Box

Voltage 120V 120V 120V 24V 24V 24V N/A

Current AC AC AC DC DC DC N/A

Deluge Preaction Control Panels The PDRP-2001 and PDRP-2001E fire alarm control panels (FCAPs) are compatible with the System Sensor i3 Series conventional smoke detectors that transmit signals to the FCAP to indicate important status conditions such as low temperature 45˚F (7.22˚C) or required maintenance. This control panel is compatible with conventional input devices such as waterflow devices, tamper switches, 2-wire smoke detectors, 4-wire smoke detectors, pull stations, and other normally-open contact devices. The PDRP2001 and PDRP-2001E panels supervise wiring, AC voltage, battery charge and battery level. • Designed for sprinkler standards NFPA 13, 15, and 16. • Adjustable water flow discharge timer and two soak timers. • Cross-zone (double interlock) capability. • 6 programmable Style B (Class B) IDCs (Initiating Device Circuit). • 4 programmable Style Y (Class B) output circuits - (special application power). Model PDRP-2001

Description Deluge Preaction Control Panel. Provides reliable fire detection, signaling and protection.

www.lipipe.com Saving You Time and Money Through Service!

21

Backflow Preventers

Model 350ABG Series Double Check Assembly Complete with new, grooved, lighter weight ductile iron body, bulk head fittings, and single access cover, two center stem guided stainless steel spring check valves, with options for flanged by grooved OSY or grooved butterfly valves, and 4 test cocks. Designed for installation on potable water lines to protect against both back-siphonage and back-pressure of polluted water into the potable water supply. Model 350ABG4 350ABG6 350ABG8

Size 4” 6” 8”

Weight 127 203 387

350ABG 350AOSY 350AOSYFG 350AOSYBFG 350ABPIG

With grooved end tampered butterfly inlet and outlet. With flanged inlet and outlet, OSY inlet and outlet gate valves. With flanged OSY inlet and grooved end OSY outlet. With flanged OSY inlet and grooved end tampered butterfly outlet. With grooved end tampered butterfly inlet and grooved end Post Indicator outlet.

Model 350L Series Double Check Valve

Model 350L4 350L6 350L8 350L10

Size 4” 6” 8” 10”

Weight 90 159 358 388

• • • • • • •

Lightweight ductile iron construction with FDA approved fusion epoxy coat inside and out. Dual torsion springs bias the check in the closed position - low head loss. No internal threads in body or cover, eliminating exposure to corrosion. Entire unit serviceable in line. Temperature range 33˚F - 140˚F. Maximum pressure 175 psi. ASSE® Listed 1015, IAPMO® Listed, CSA® Certified, cULus® Classified, FM® Approved, City of Los Angeles (all approvals Horizontal and Vertical flow-up).

Model 350DAL Series Double Check Valve

Model 350DAL4 350DAL6 350DAL8 350DAL10

Size 4” 6” 8” 10”

Weight 105 174 374 404

• The bypass assembly consists of a 5⁄8” x ¾” water meter in series with a double check backflow preventer (950XL). • For use in fireline applications. • Lightweight ductile iron construction with FDA approved fusion epoxy coat inside and out. • Dual torsion springs bias the check in the closed position. • No internal threads in body or cover, eliminating exposure to corrosion. • Entire unit serviceable in line. • Temperature range 33˚F - 140˚F. • Maximum pressure 175 psi. • ASSE® Listed 1048 (Horizontal/Vertical), CSA® Certified, cULus® Classified, FM® Approved, and AWWA Compliant (all approvals Horizontal and Vertical flow-up).

Model 375L Reduced Pressure Backflow Preventer • • • •

Model 375L4 375L6 375L8 375L10

22

Size 4” 6” 8” 10”

Weight 97 171 377 407

Lightweight ductile iron construction with FDA approved fusion epoxy coat inside and out. Dual torsion springs bias the check in the closed position. No internal threads in body or cover, eliminating exposure to corrosion. Relief valve located at bottom of valve with test cocks facing up. Allows for easy installation and testing. • Temperature range 33˚F - 140˚F. • Maximum pressure 175 psi. • ASSE® Listed 1013, IAPMO® Listed, CSA® Certified, cULus® Classified, FM® Approved, and AWWA Compliant.

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

Backflow Preventers Model 375DAL Sizes Available: 4” - 10”

• Reduced pressure backflow preventer consisting of a pressure differential relief valve located between two independently operated spring-loaded center guided check valves and four full port resilient seated test cocks. • The bypass assembly consists of a 5⁄8” x ¾” water meter in series with a reduced pressure principle backflow preventer. • For use in fireline services. • Lightweight ductile iron construction with FDA approved fusion epoxy coat inside and out. • Dual torsion springs bias the check in the closed position. • No internal threads in body or cover, eliminating exposure to corrosion. • Relief valve located at bottom of valve with test cocks facing up. Allows for easy installation, repair and testing. • Temperature range 33˚F - 140˚F. • Maximum pressure 175 psi. • ASSE® Listed 1047, cULus® Classified, and FM® Approved.

Model 375DAL4 375DAL6 375DAL8 375DAL10

Size 4” 6” 8” 10”

Weight 113 187 382 412

Model 950XL3Q 950XL1 950XL1Q 950XL1H 950XL2

Size ¾” 1” 1¼” 1½” 2”

Weight 9 9 21 24 27

Model 975XL3Q 975XL1 975XL1Q 975XL1H 975XL2

Size ¾” 1” 1¼” 1½” 2”

Weight 12 13 26 26 33

Model 950XL Sizes Available: ¾”, 1”, 1¼”, 1½”, 2” • • • • • • •

Double check valve assembly “Y” pattern body style. Complete with two full port resilient seated ball valves for shut-off. Bronze body construction. Entire unit serviceable in line. Temperature range 33˚F - 180˚F. Maximum pressure 175 psi. ASSE® Listed 1015, IAPMO® Listed, CSA Certified (Horizontal ¾”-2”)(Vertical flow-up ¾”, 1¼”, 1½”, 2”), AWWA Compliant, cULus® Classified, FM® Approved and City of Los Angeles Approved.

Model 975XL Sizes Available: ¾”, 1”, 1¼”, 1½”, 2” • Reduced pressure backflow preventer “Y” pattern body style. • Complete with two full port resilient seated ball valves for shut-off and four resilient seated ball valve test cocks. • Bronze body construction. • Entire unit serviceable in line. • Temperature range 33˚F - 180˚F. • Maximum pressure 175 psi. • ASSE® Listed 1013, IAPMO® Listed, CSA Certified, AWWA Compliant, cULus® Classified (Model 975LXL), FM® Approved and City of Los Angeles Approved.

Wilkins devices are available grooved end. Also available are automatic control valves and fire protection pressure control valves. Contact your nearest Long Island Pipe Supply branch.

www.lipipe.com Saving You Time and Money Through Service!

23

OS&Y Flanged Gate Valve Model 8068A

• Valves shall conform to the latest revision of AWWA Resilient Seated gate valve. Standard C-509, be UL listed and FM approved for service to 250 psi, cold water, non-shock water works service and 200 psi fire protection service. Flanges drilled to ANSI B-16.1 (125#). • All internal parts shall be accessible without removing the body from the line. • The wedge shall be of cast iron completely encapsulated with resilient material. The resilient sealing material shall be permanently bonded to the cast iron wedge with a rubber tearing bond to meet ASTM D-429. • UL Listed and FM Approved.

Part # 2200-50 2200-60 2200-70 2200-90 2200-100 2200-110 2200-120

Size 2½” 3” 4” 6” 8” 10” 12”

Weight 51 64 105 152 253 427 581

Flanged Swing Check Valve Sizes Available: 2½” - 12” • • • • •

126-Bronze seat. 126A-Rubber seat. 175 psi Working pressure. cULus Listed and FM Approved. Approved by N.Y.C. Material and Equipment Acceptance.

Grooved End Butterfly Valves Sizes Available: 2½” - 8”

Model GBT2H GBT3 GBT4 GBT6 GBT8

24

Size 2½” 3” 4” 6” 8”

Weight 16 20 24 37 43

• • • • • • • •

Single Pole/Single Throw. Double Seal Design for Bubble-Tight Shutoff at 300 psi. Corrosion Resistant Fusion Bonded Nylon II Body Coating. Easy to Read, Flag Type Position Indicator. Low Torque Operation, High Cycle Life. Light Weight. cULus Listed and FM Approved. Approved by N.Y.C. Material and Equipment Acceptance.

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

Fire Sprinkler System Compressors Emglo’s Fire Sprinkler System air compressors protect some of the world’s most valuable buildings. Available in standard, base-mounted, tank-mounted, or compressor/regenerative dryer packages, all models feature cast-iron compressor pump and thermally protected electric motors. Emglo’s Fire Sprinkler System air compressors surpass architectural and code specifications and arrive ready to work. From single-stage to two-stage and compressor/dryer units, Emglo has the model you need. Emglo fire sprinkler system air compressors arrive totally assembled - special models such as high pressure, explosion-proof, vertical tank, etc. are available. Special units can be designed for your application.

Base Plate Emglo manufactures base mounts from 1⁄3 HP to 5 HP, with or without automatic control groups, to allow you to complete job-site flexibility. When ordered with a unit, automatic control groups are factory-mounted, wired and fully tested before shipment. You need only connect power and refill the pump crankcase to the proper oil level. And if you order without controls, the pump and motor are still fully tested. Part # 900-50 900-60 900-70

Size 1⁄3 HP ¾ HP 1½ HP

System Size 220 350 885

Weight 90 110 120

Tank-Mounted Emglo provides fully assembled 1⁄3 HP to 5 HP 30-gallon tank-mounted units with three grades of air receivers available. Also available: • 17-gallon tanks. • Dryer. • Tank mounted available special order only.

IPEX CPVC Fire Sprinkler Piping Corrosion resistant fire sprinkler pipe, IPS sizes ¾” through 3”, for use in wet automatic fire sprinkler systems. Approved for more applications than any other nonmetallic system on the market, IPEX BlazeMaster® is the new industry standard in fire sprinkler systems. BlazeMaster® CPVC pipe and fittings are fully approved for use in all NFPA 13 Light Hazard applications, in both new and retrofit construction, such as: • High-rise buildings (including apartments and hotels) • Schools and institutions • Single-family dwellings With a high flash ignition temperature, low flame spread, low smoke generation and a fuel contribution of 0, BlazeMaster® fire sprinkler systems meet the most stringent requirements governing the use of combustible pipe in buildings. In accordance with applicable building and mechanical codes, BlazeMaster® is also permitted for use in: • Exposed piping installations • Air plenums • Exposed system risers • Exposed solid wood joists • Fire protected garages • Underground water pressure services Blazemaster® is a registered trademark of the Lubrizol Corporation.

www.lipipe.com Saving You Time and Money Through Service!

25

Lansdale International is the complete source of high quality fire sprinkler accessories. Available from Long Island Pipe Supply or Lansdale International directly. 2-Piece Recessed Canopies Standard Push On Skirt

¾” of adjustment for ½” or ¾” IPS sprinkler heads. White powder-coat finished for corrosion resistance and improved appearance.

GFI Type Part # 900-2950 900-3010 900-2955 900-2960 900-2970

Description 2-Piece Chrome ½” 2-Piece White ½” 2-Piece Brass ½” 2-Piece Chrome ¾” 2-Piece White ¾”

Screw-In Type Part # 700-3860 700-3870

Description 2-Piece Recessed Canopy Chrome ½” 2-Piece Recessed Canopy White ½”

Short Skirt

Type GF2 for Quick Response Heads and Residential Heads ½” of adjustment for ½” IPS sprinkler heads. Ideal for residential sprinklers. White powder-coat finished for corrosion resistance and improved appearance. Part # 900-2980 900-2990 900-2940

Description 2-Piece Recessed Canopy Chrome ½” Short 2-Piece Recessed Canopy White ½” Short 2-Piece Recessed Canopy Chrome ¾” Short

Canopies

One Piece Light Gauge Steel Model B Features lightweight design of chrome-plated steel. 5⁄8” depth for ½” or ¾” sprinkler heads. Part # 900-3020 900-3070

26

Description ½” IPS ¾” IPS

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

Extended Two Piece Escutcheon Cup and Skirt, Pendant Steel

Telescoping design permits up to 1” adjustment to compensate for variations in the distance that pipe couplings extend below the ceiling. Made of steel and available in brass, chrome and white finishes. Diameter: 3½”; Depth: 2” min., 3” max.; ½” and ¾” NPT. Part # 900-3030 900-2920 900-2930 900-2935 900-3042 900-3044

Description ½” Chrome ¾” Chrome ½” White ¾” White ½” Brass ¾” Brass

Wall Plate

Plastic Chrome Features one piece construction of flexible plastic, split for easy installation around installed pipe. Vacumetalized chrome finish for enhanced appearance. Will not fall off under normal conditions. Also available in white plastic. Part # 900-2792 900-2794 900-2796 900-2798 900-2800 900-2802 900-2806

Description Wall Plate, 1” Chrome Wall Plate, 1¼” Chrome Wall Plate, 1½” Chrome Wall Plate, 2” Chrome Wall Plate, 2½” Chrome Wall Plate, 3” Chrome Wall Plate, 4” Chrome

Wall, Floor and Ceiling Plates Heavy Gauge Steel

Features chrome plated steel construction, hinged with springs, for easy installation and centering on pipe. Part # 900-2890 900-2880 900-2870 900-2860 900-2850 900-2840 900-2820

Description 1” F & C Plate 1¼” F & C Plate 1½” F & C Plate 2” F & C Plate 2½” F & C Plate 3” F & C Plate 4” F & C Plate

Wall Plate

Malleable with Set Screw, Galvanized Manufactured of malleable iron and galvanized for superior corrosion resistance. Complete with set screw for secure positioning on installed pipe. Part # 900-1605 900-1615 900-1625 900-1635 900-1645 900-1655 900-1665

Description 1” Wall Plate IPS Galvanized 1¼” Wall Plate IPS Galvanized 1½” Wall Plate IPS Galvanized 2” Wall Plate IPS Galvanized 2½” Wall Plate IPS Galvanized 3” Wall Plate IPS Galvanized 4” Wall Plate IPS Galvanized

www.lipipe.com Saving You Time and Money Through Service!

27

Alarm Bells and Accessories Part # 100-0605 100-0625 100-0645 100-0603 100-0665 100-0685 100-0705

Description Alarm Bell, 6” 120V AC Alarm Bell, 8” 120V AC Alarm Bell, 10” 120V AC Back Box Alarm Bell, 6” 24V DC Alarm Bell, 8” 24V DC Alarm Bell, 10” 24V DC

Break Shackle Locks Break shackle locks prevent tampering with controlled valves. Locks are keyed alike to allow easy access by authorized personnel. Part # 700-0100 700-0110

Description Large Steel Break Lock Small Brass Break Lock

Sign Chain Zinc plated for corrosion resistance. Suitable for use in exposed areas. Part # 700-1180 700-1190

Description #16 Sign Chain, 100’ Box #16 Sign Chain, 250’ Roll

Headguards Sprinkler Head Guards provide sprinkler head protection from occasional light contact in warehouses, institutional and other applications where the occupancy exposes the sprinkler head to potential damage from its environment. Sprinkler head guards do not protect sprinkler heads from direct impact or abuse. Part # 900-2900 900-2910

28

Description Headguard 1pc 2hk Red GC-1 Headguard 1pc 2hk Chrome 02-605

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

Sprinkler Identification Signs Manufactured of aluminum, painted white then printed with “fade resistant” red ink. Each sign is drilled for easy installation and is plastic coated to prevent scratching of finish during shipment and final installation. Designed in accordance with NFPA. Part # 900-0994 900-0920 900-0940 900-0830 900-0960 900-0950 900-0930 900-0910

Description Air Line, 6” x 2” Alarm Test, 6” x 2” Anti-Freeze System, 6” x 2” Auxiliary Drain, 6” x 2” Control Valve, 6” x 2” Control Valve, 9” x 7” Fire Alarm Bell, 9” x 7” Inspectors Test, 6” x 2”

Part # 900-0900 900-0980 900-0880 900-0840 900-0990 900-0970 900-0890

Description Hydraulic Systems, 5” x 7” Main Control, 6” x 2” Main Drain, 6” x 2” Sprinkler Valve Room, 6” x 2” Test Valve, 6” x 2” Water Motorline, 6” x 2” Valve Shut

Spare Sprinkler Head Boxes All cabinets come with “knockouts” to accomodate ¾” IPS sprinklers. Finish: Red Enamel Part # 900-710 700-570 700-540

Description 12 Spare Heads - ½” x ¾” holes 6 Spare Heads - ¾” x 1” holes 3 Spare Heads - ½” x ¾” holes

Rectorseal Fire Stop Metacaulk 1000® is a water based, flexible, highly intumescent sealant designed for use on metal, insulated fiberglass and plastic pipes. It can also be used for top of the wall construction joints, power and telephone cables. • Meets ASTM E 814, UL 1479 and UL 2079 standards. • Remains flexible. • Non-sagging, non-toxic, no VOC’s. • Will not re-emulsify after cure. • Paintable. • Available in cartridges and pails. • UL Classified up to 3 hours. Volume Coverage: 10.3 Oz. (304 mL) tube - 18 cu. in. (295 cc) 5 Gallon (18.9 L) pail - 1155 cu. in. (5000 cu. cm/L) VOC: Negligible ASTM 84, UL 723 Tunnel Test Part # 900-3450 900-3460

Description 10.3 Oz. Cartridge 5 Gal. Pail

Gloves Part # 900-530 900-540 900-550

Description Brown Leather Jersey Leather Palm Safety Cuff PVC Dotted Knit

www.lipipe.com Saving You Time and Money Through Service!

29

Paint Markers Suitable for use on steel and plastic pipe as well as other non-porous materials. These markers feature a “pump” style tip for continuous flow of paint to the tip. Marks through grease, oil, and other contaminants. Part # 900-3420 900-3425

Description Yellow White

No-Freeze Anti-Freeze Non-Toxic Glycol

No-Freeze, the Original and most trusted name in non-toxic anti-freeze. A chemically balanced solution engineered to give worry free protection. Provides expansion point protection to temperatures of -100˚F. System will flow to -61˚F. Part # 900-3250 900-3260

Description 5 Gal. Pail 55 Gal. Drum

Fire & Ice Anti-Freeze

Glycerine Based (CPVC Safe) Fire & Ice anti-freeze protection fluid is glycerine based in compliance with the recommendations of NFPA 13. Systems using Fire & Ice are assured flow protection of temperatures to below -15˚F and burst protection lower than -50˚F. It is ready to use and should not be diluted. Part # 900-3246 900-3247

Description 5 Gal. Pail 55 Gal. Drum

LIP Tape

Teflon® Pipe Thread Sealing Tape Made from pure virgin Teflon® and manufactured to MIL SPEC T27730A.

Part # 900-3220 900-3230 900-3240

Description ½” x 520” Pipe Tape ¾” x 520” Pipe Tape 1” x 520” Pipe Tape

*Registered trademark of E.I. Dupont

30

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

LIP Seal Thread Sealant Paste w/ Teflon® Formulated as a low cost, high performance thread sealant. LIP Seal contains more Teflon® by volume than any other similar product. Suitable for most threaded materials.

Part # 900-3430

Description 1-Qt. Flat Top Can

*Registered trademark of E.I. Dupont

LIP Lube Mechanical Coupling Grease Specifically designed for mechanical couplings. This lubricant will not dry out or freeze in normal applications.

Part # 900-3680

Description 1-Qt. (Approx. 2 Lbs.)

Wood Handle Dope Brush A 6” wood handle with natural fiber bristles. For use with pipe dope and mechanical coupling grease.

Part # 900-3600

Description Dope Brush

Weld Sealant-Permabond® HL126 HL126 anaerobic sealant prevents porosity leaks in sprinkler system fabrication and repairs porosity leaks in the field. • Eliminates repair costs due to call-backs • Easy to use • Prevents leaks in fabrication • Seals leaks in the field HL126 sealant cures to a permanent plastic seal that fills the imperfections in the welded surface. The curing process is initiated by the presence of metal (weld) and the absence of air, and occurs once the sealant wicks into the porosity leak or pinhole.

Part # 900-3400

Description HL126 250 mL Weld Sealant

www.lipipe.com Saving You Time and Money Through Service!

31

Liplock® Pipe Dope

Anaerobic Pipe Sealant with Lubricants Liplock sealant uses anaerobic technology to prevent leaks in sprinkler system fabrication and improves installation in the field. Unlike traditional pipe dope, Liplock sealant cures to a plastic seal initiated by the presence of metal and absence of air. • 100% leak-free seal. • Eliminates repair costs due to call-backs. • Available in 750 mL containers. • Seals cut and mis-threaded fittings. • Will not dry out when container is left open. • Will not thin in summer or thicken in winter. • Replaces pipe dope and sealing tapes. • UL Listed. Part # 900-3395

Description 750 mL LIP Lock Pipe Dope

Permabond

Anaerobic Pipe Sealant with Teflon® Permabond sealant uses anaerobic technology to prevent leaks in sprinkler system fabrication and improves installation in the field. Unlike traditional pipe dope, Permabond sealant cures to a plastic seal initiated by the presence of metal and the absence of air. • Used by Long Island Pipe Supply for all fabricated jobs to assure a leak-free seal. • Eliminates repair costs due to call-backs. • Available in 750 mL containers. • Seals cut and mis-threaded fittings. • Will not dry out when container is left open. • Will not thin in summer or thicken in winter. • No need for sealing tapes. • UL Listed. Part # 900-3410 900-3460

Description 750 mL Permabond 5 Gal. Permabond

*Registered trademark of E.I. Dupont

Premium Cutting Oil Dark Cutting Oil reduces friction and acts as an effective coolant and anti-weld agent during hand thread cutting operations or when using low rpm machines. • Special additive provides increased lubricity for longer die life. • Will cut smoother, sharper, unbroken threads. Part # 900-3490 900-3270

32

Description Dark Cutting Oil, 1 Gal. Dark Cutting Oil, 55 Gal.

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

Top Beam C-Clamp • Material: Malleable Iron. • Standard Finish: Plain • Service: Designed for attaching a hanger rod to the top flange of a bar joist or other structural shapes. • UL Listed and FM Approved. Part # 900-4150 900-4160

Description 3⁄8” Top Beam Clamp ½” Top Beam Clamp

Wide Mouth Top Beam C-Clamp • Material: Malleable Iron. • Standard Finish: Plain • Service: Designed for attaching a hanger rod to the top flange of a bar joist or other structural shapes. • UL Listed and FM Approved. Part # 900-4180 900-4190 900-4170

Description 3⁄8” Wide Mouth Top Beam Clamp ½” Wide Mouth Top Beam Clamp 5⁄8” Wide Mouth Top Beam Clamp

Side Beam Connector • • • • •

Material: Malleable Iron. Standard Finish: Plain Service: Designed for attaching a hanger rod to the side of beam or walls. Weight: Wt./C 12 Lbs. (5.4 kg) UL Listed and FM Approved.

Part # 900-4140

Description 3⁄8” Side Beam Connector

Rod Couplings Zinc-plated inc-plated for corrosion resistance. • Material: Malleable Iron. • Standard Finish: Plain • Service: Designed for attaching a hanger rod to the side of beam or walls. • UL Listed and FM Approved. Part # 900-1530 900-1500 900-1510 900-1520

Description 3⁄8” x 11⁄8” Rod Coupling ½” x 1¾” Rod Coupling 5⁄8” x 21⁄8” Rod Coupling ¾” Rod Coupling

Purlin Malleable C-Clamp • • • • • •

Material: Malleable Iron. Standard Finish: Plain Service: Designed for attaching a 3⁄8”hanger rod to the bottom flange of a Z-Purlin. Weight: Wt./C 90 Lbs. (40.9 kg) Design Load: Wt./C 500 Lbs. (227.3 kg) UL Listed. Complies with Federal Spec. WW-H-171E Type 23 and Manufacturers Standardization Society SP-69 and SP-58 Type 19.

Part # 900-4200

Description 3⁄8” Purlin Malleable C-Clamp

www.lipipe.com Saving You Time and Money Through Service!

33

Toggle Wings • Zinc plated for corrosion resistance. Part # 900-1690

Description 3⁄8” Toggle Wings

Coach Screw Rod • Material: Steel • Standard Finish: Plain • Service: Designed for suspending pipe supports from wood structures Part # 900-1470 900-1740 900-1480 900-1490

Description 3⁄8” x 6” Coach Screw Rod 3⁄8” x 8” Coach Screw Rod 3⁄8” x 10” Coach Screw Rod 3⁄8” x 12” Coach Screw Rod

Ceiling Flange • Material: Malleable Iron • Finish: Plain • UL Listed. Part # 900-4130

Description 3⁄8” Ceiling Flange

Wood Drive Screws • • • •

Material: Steel Finish: Plain Service: For fastening light load attachments to wood beams. Weight: Wt./C 1.1 Lbs. (.5 kg)

Part # 900-1430

Description #12 x 1½” Wood Drive Screw

Drop-In Anchors • • • • •

For use in concrete and stone. Use with machine screw, bolt or threaded rod. Made of zinc plated steel. Setting tool available. For flush mounted installations.

Part # Size 900-1550 3⁄8” 900-1540 ½” DROP-IN SET TOOLS 900-1556 3⁄8” 900-1553 ½”

34

Length 19⁄16” 2”

Thread Depth 5⁄8” 13⁄16”

Drill/Hole Diameter ½” 5⁄8”

-

-

-

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

Double Expansion Anchors • • • • • • • •

For use in concrete, brick, stone. Use with machine, screw or bolt. Made of Zamac #3 alloy. Layout or hole spotting required. Heavy-duty anchor. Dual expansion develops greater contact with walls of hole. Non-caulking, expands as bolt is tightened. Rustproof.

Part # 900-1558 900-1560 900-1562 900-1564

Thread Size 3⁄8” - 16 ½” - 13 5⁄8” - 11 ¾” - 10

Length

Drill/Hole Diameter 5⁄8” 7⁄8” 1” 1¼”

1½” 2” 25⁄8” 2¾”

Allowable Pull Out Load 1002 1220 1550 2412

Allowable Shear Load 1085 2197 3325 3940

Washers Part # 900-1580 900-1570 900-1600 900-1590 900-1750

Description 3⁄8” Flat Washer ½” Flat Washer 5⁄8” Flat Washer ¾” Flat Washer 3⁄8” x 2” Fender Washer

Hex Nuts Part # 900-1410 900-1400 900-1380 900-1390 900-1420

Description 3⁄8” Hex Nut ½” Hex Nut 5⁄8” Hex Nut ¾” Hex Nut 7⁄8” Hex Nut

Machine Bolts, Hex Head Part # 900-1710 900-1720 900-1730

Description 5⁄8” x 3” Machine Bolt ¾” x 3½” Machine Bolt 7⁄8” x 3¾” Machine Bolt

Hole Saws and Accessories Part # 900-3860 900-3870 900-3890 900-3880 900-3920

Description ¾” Hole Saw 7⁄8” Hole Saw 1” Hole Saw 13⁄16” Hole Saw 1¼” Hole Saw

Part # 900-3850 900-3960 900-3970 900-3910 900-3990

Description 1½” Hole Saw 19⁄16” Hole Saw 1¾” Hole Saw 2” Hole Saw 21⁄8” Hole Saw

Part # 900-3940 900-3900 900-4010 900-3950 900-3930

Description 2¼” Hole Saw 2½” Hole Saw 2¾” Hole Saw 27⁄8” Hole Saw 3” Hole Saw

www.lipipe.com Saving You Time and Money Through Service!

Part # 900-3980 900-4020 900-3820 900-3840 900-2665

Description 3½” Hole Saw 4” Hole Saw 1L Arbor 2L Arbor ¼” Pilot Bit

35

OS&Y Valve

Model l8 Gate Valve • Bronze screwed ends Outside Screw & Yoke. • 100% Pressure Tested Rising Stem. • UL Listed and FM Approved at 175 psi WOG. Part # 2200-10 2200-20 2200-30 2200-40

Description 1” OS&Y Valve 1¼” OS&Y Valve 1½” OS&Y Valve 2” OS&Y Valve

Full Port Ball Valve, 600 psi

• • • • • • • • •

Forged Brass. Hard Chrome plated bronze ball. 150 psi WSP, 600 psi non-shock WOG. For use with temperatures from -20˚F to 350˚F. Teflon® seals, blowout proof stem. UL-LP Gas - 400 psi. Suitable for use with flammable liquid. Complies with Federal Spec. WW-V-35B, Type II, Style 3. CGA 3-88 (5 PSIG) Certified.

Part # 900-2000 900-2020 900-2030 900-2040 900-2050 900-2060 900-2070

Description ¼” Full Port Ball Valve ½” Full Port Ball Valve ¾” Full Port Ball Valve 1” Full Port Ball Valve 1¼” Full Port Ball Valve 1½” Full Port Ball Valve 2” Full Port Ball Valve

Swing Check Valve

Full Floating Clapper Assembly Small pipe diameter check valves are made from brass and feature a full floating clapper assembly with soft seat. Clapper design assures proper clapper seating during valve cycle. • Valve Body: Cast Brass (85-5-5-5). • Clapper Assembly: Forged Brass. • Seat: NBR (Chloramine Resistant). • Sizes: ½” IPS - 2” IPS, Female by Female. • Rated Pressure: 175 psi. Part # 900-1940 900-1950 900-1960 900-1970 900-1980 900-1990

36

Description ½” Swing Check Valve ¾” Swing Check Valve 1” Swing Check Valve 1¼” Swing Check Valve 1½” Swing Check Valve 2” Swing Check Valve

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

Bronze Globe Valve Bronze Globe Valves are specifically designed for use in fire sprinkler systems. Typical use is in trim or drain applications. • Material: Brass or Bronze, w/ Teflon® Seat. • Hand Wheel: JIS FC 20 painted red. • cULus Listed to 300 psi (2R97). *Registered trademark of E.I. Dupont

Part # 900-1760 900-1780 900-1790 900-1800 900-1810 900-1820 900-1830

Description ¼” Bronze Globe Valve ½” Bronze Globe Valve ¾” Bronze Globe Valve 1” Bronze Globe Valve 1¼” Bronze Globe Valve 1½” Bronze Globe Valve 2” Bronze Globe Valve

IPS Angle Globe Valve Manufactured from cast brass, these angle valves are made for trim or drain applications and designed to be suitable for all sprinkler systems including high pressure systems. The soft seat design utilizes NBR Nancar N70 material for positive sealing to 300 psi. The most common use for the 2” IPS size is as a system drain at the riser. May be used on both alarm valve and shotgun riser assemblies. • Material: Cast Brass Body & Bonnet • cULus Listed.

Part # 900-1880 900-1890 900-1900 900-1910 900-1920 900-1930

Description ½” Angle Globe Valve ¾” Angle Globe Valve 1” Angle Globe Valve 1¼” Angle Globe Valve 1½” Angle Globe Valve 2” Angle Globe Valve

Angle Hose Valve Angle hose valves feature all brass construction with cast bodies for rigidity and light weight. Rated to 300 psi these valves can be used with a Fire Hose Rack Assembly or as a Fire Department Connection outlet. • UL Listed and FM Approved.

Part # 900-1130 900-1140 900-1120

Description 2½” FNPT x MNST Angle Hose Valve 2½” FNPT x Angle Hose Valve NY Corp. Thread 1½” FNPT x MNST Angle Hose Valve

www.lipipe.com Saving You Time and Money Through Service!

37

Test and Drain Valve • • • • •

Used to test water flow through sprinkler systems. Forged brass body with three-position ball valve (OFF-TEST-DRAIN). Integral sight glass with acrylic see-through windows. ½” restricted orifice for system test position. UL Listed and FM Approved. Patented design.

Part # 900-0770 900-0780

Description 1” (½” Orifice) 1¼” (½” Orifice)

Angle Valve - Closed Pattern Angle valves feature all brass construction. Rated to 300 psi these valves can be used with a Fire Hose Rack Assembly or as a Fire Department Connection outlet.

Part # 900-1935

Description 2” Angle Valve - Closed Pattern

Pressure Relief Test and Drain Valve • Rated at 175 psi. • The Pressure Relief Test and Drain is a combination pressure relief, inspectors test and drain valve in one. Part # 700-12470

Description 1” Pressure Relief Test and Drain Valve

Angle Pressure Reducing Valve • • • •

400 psi field adjustable automatic pressure regulating valve. Cast bronze valve with Female NPT x Male hose thread outlet. For use as a fire hose rack assembly valve or sprinkler control valve. For pressure regulation when required.

Part # 900-4490

38

Description 2½” Angle Pressure Reducing Valve

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

¼” Three-Way Bronze Valve The ¼” IPS three-way female threaded valve is used to facilitate the installation of sprinkler system pressure gauges. The valve provides for one inlet and two outlets. This design allows for replacement of the system gauge without shutting down the water supply to the sprinkler system. • Material: Body-Bronze, Seat-Brass, Handwheel-Iron. • Finish: Rough Brass. • Working Pressure: 300 WOG.

Part # 900-1850

Description ¼” Three-Way Bronze Valve

In-Line Spring Check Valve • Rated at 200 psi. • Brass construction with an O-ring seat and spring loaded clapper. Part # 700-12180 700-12190 700-12200 700-12210

Description 1” In-Line Spring Check Valve 1¼” In-Line Spring Check Valve 1½” In-Line Spring Check Valve 2” In-Line Spring Check Valve

Wafer Check Valve • 175 psi Working Pressure. • 350 psi Test Pressure. • UL Listed and FM Approved.

Part # 2200-960 2200-970 2200-980

Description 4” Wafer Check Valve 6” Wafer Check Valve 8” Wafer Check Valve

Grooved Check Valve • 175 psi Working Pressure. • Testing Pressure 100% 125 psi Test Air/Water. • UL Listed and FM Approved.

Part # 900-1990 900-1992 900-1994 900-1996

Description 2” Grooved Check Valve 2½” Grooved Check Valve 3” Grooved Check Valve 4” Grooved Check Valve

www.lipipe.com Saving You Time and Money Through Service!

39

Adjustable Pressure Relief Used in grid and residential systems or where pressure relief is required. Adjustable from 75 to 175 psi. System pressure gauge must be used for accurate adjustment.

Part # 900-0030 900-0020

Description ½” Adjustable PRV P1000A-175 ¾” Adjustable PRV P1000A-175

Hose Valve Accessories Part # 900-1090 900-1100 900-1110 900-1070 900-1080 900-1150 900-1160 900-1170

Description 2½” Cap w/ Chain, Brass, NST 2½” Cap w/ Chain, Brass, NY Corp. Thread 1½” Cap w/ Chain, Brass, NST 2½” Cap w/ Chain, Plastic, NST 1½” Cap w/ Chain, Plastic, NST Reducer, 2½” FNST x 1½” MNST 2½” Plug w/ Chain, Brass, NST 2½” Plug w/ Chain, Brass, NY Corp. Thread

Ring Gaskets Red rubber ring style for 150 lb. pipe flanges. 1⁄8” Thickness. Other sizes available. Part # 900-0230 900-0240 900-0250

Description 2” x 1⁄8” Ring Gasket 2½” x 1⁄8” Ring Gasket

900-0270

4” x 1⁄8” Ring Gasket 5” x 1⁄8” Ring Gasket 6” x 1⁄8” Ring Gasket 8” x 1⁄8” Ring Gasket 10” x 1⁄8” Ring Gasket 12” x 1⁄8” Ring Gasket

900-0280 900-0290 900-0300 900-0310 900-0320

3” x 1⁄8” Ring Gasket

Ball Drip Ball drips feature bronze construction. Prevents moisture accumulation on “dry” side of fire department connection when used in conjuction with an approved check valve. Part # 900-0810 900-0820

40

Description ½” IPS Ball Drip ¾” IPS Ball Drip

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

Lansdale Brass Extension Nipples Designed to be used to correct sprinkler head elevation without removing or re-cutting sprinkler drop. THIS PRODUCT IS COVERED BY ADDITIONAL DISCLAIMERS REGARDING SUITABILITY AND USE. PURCHASER AND USER TAKE FULL RESPONSIBILITY FOR THE USE OF THIS PRODUCT. LONG ISLAND PIPE SUPPLY WILL NOT BE HELD LIABLE FOR PRODUCT FAILURE OR DAMAGE CAUSED BY FIRE.

Part # 900-0040

Description ½” X ½” IPS Brass Sprinkler Extension

Brass Adapters, Extension and Nipples Part # 900-1370

Description 1½” NST Rack Nipple, Brass

Bronze Sight Glass Bronze Sight Glasses are available in both “full flow” and “restricted orifice” design. Flow can be viewed through two high impact polycarbonate windows on either side of the sight glass. All models feature male by female thread patterns for easy “in line” installation. The “full flow” design is suitable for system flow verification and the restricted orifice types can be used to simulate system sprinkler head flow which can be viewed through either window. • Type: Cast Bronze Sight Glass • Body: Bronze Alloy • Windows: Polycarbonate • Finish: Rough Bronze

Part # 900-0740

Description 1” IPS Sight, ½” Orifice FxF

Brass Orifice Union Part # 900-0762 900-0764

Description 1” x ½” Brass Orifice Union ½” x 3⁄32” Brass Orifice Union

www.lipipe.com Saving You Time and Money Through Service!

41

Single Clapper Siamese Fire Department Connections are all brass featuring single clapper design. • Swivels are 2½”. • 4” Pipe size. • UL Listed and FM Approved. Part # 900-1190 900-1230 900-1270 900-1240

Description FDC Straight NST 4” x 2½” x 2½” FDC Straight NYT 4” x 2½” x 2½” FDC 90˚ NST 4” x 2½” x 2½” FDC 90˚ NYT Siamese 4” x 2½” x 2½”

Open Snoot Assembly Each kit contains one open snoot, 2½” IPS brass “Auto Sprinkler” wall plate and a 2½” plug with chain, boxed and labeled.

Part # 900-1360 900-1340

Description 2½” FNPT x FNST w/ Cap and RB Plate 2½” FNPT x NY Thread Corp. w/ Cap and RB Plate

Single Outlet Ideal for residential sprinkler system. Features integral identification sign, “Auto Sprinkler”. UL Listed.

Part # 900-1330

Description FDC 1½” NPT x NST w/ Cap and Chain

FDC Breakable Caps Designed to break with a single blow of a hydrant wrench. Available in plastic or metal and comes with 2 caps per set. Eye bolts are included in the set. Part # 900-1030 900-1010 900-1020

Description 2½” Metal, FDC Breakable Cap 2½” Plastic, FDC Breakable Cap 3” Metal, FDC Breakable Cap

Double Clapper Two-Way Outlets An exposed auxiliary inlet connection with 500 GPM inlet capacity to supplement fire protection water supply. Exposed design provides an economical method of satisfying Fire Department inlet requirements. UL Listed and FM Approved. Part # 900-1250

42

Description 4” x 3” x 3” NY

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

FDC Identification Plate Part # 900-1040 900-1060 900-1050 900-1350

Description FDC Wallplate, Plastic FDC Sign, 4” x 8” Fire Dept. Connection FDC 4” Auto Sprinkler Brass FDC 2½” IPS, Auto Sprinkler Brass

STORZ Type Fire Department Connection STORZ Type Fire Department Connections are designed specifically for fire sprinkler systems. Originally designed as a quick connection system for large diameter hose, each STORZ Type inlet features two or three lugs depending on connection size. STORZ connections are genderless and standardized. Any two (2) STORZ Type connections can be mated of the same diameter connection. They can be assembled or disassembled quickly with simple engagement of the lugs and approximately one quarter turn. Hose ends on Fire Service hose have an integrated “lever type lock” to keep connection from disconnecting on hose pressurization or hose movement while under pressure.

Part # 900-1200 900-1210 900-1220 900-1310

Description 4” FNPT x 4” 4” FNPT x 5” 4” FNPT x 4” 4” FNPT x 5”

STORZ STORZ STORZ w/ 30˚ Elbow STORZ w/ 30˚ Elbow

Pressure Gauges Features ABS plastic case that is superior to brass for corrosion resistance and field abuse. Phosphorus bronze Bourdon tube movement. White enameled brass dial face with large numbers for easy reading. • UL Listed and FM Approved.

Part # 900-0720 900-0730

Description Water Gauge Air Gauge

www.lipipe.com Saving You Time and Money Through Service!

43

Tru-Drill Hole Hough Uni-Block Drill Mount • • • • • • • • • • • •

Permanently attached dual drive handles. Built in small and large adapters. Sub-Compact light weight design. Dual direction base unit. Secure grounding of electric drill to pipe. Rack and pinion gear drive advancement. Easily mounted with quick fit chain. Available with either Milwaukee or DeWalt drill. Delivered complete ready to use. No drill-twist to injure fingers or wrist. Cut holes up to 4½” in steel pipe from 1” thru 10” or larger with additional chain. Operate like a portable drill press for field and shop applications, T’s, crosses, weld and thread-a-lets, branch tie-ins, saddles, etc. • Greatly reduces drilling time. • Longer life for cup hole saw or cutting tool, due to precision alignment.

HT-90E Test Pump • • • • • • • • • •

½ HP Ball bearing motor (115V) with capacitor starting. All brass pipe and fittings. Up to 300 psi operating design. Check valve holds system pressure if pump is unplugged. Liquid-filled pressure gauge positioned on system-side of check valve for convenient reading. Sturdy, easy-carry handle. Carrying weight only 32 lbs. Compact design 12”L x 12”W x 13”H. Furnished with 10 feet of hose with a quick-disconnect and check valve. Suction-side strainer to minimize the potential of plugging.

Kydex® Ring For use as a backing material behind sprinkler escutcheons. 4” diameter covers most oversize holes cut in ceiling material during installation or ceiling material replacement. Kydex is a fire resistant material made by Cleardex. May be cut to install around an existing sprinkler drop.

Part # 900-2780

Description Kydex Ring

Rod Buttons

For 3⁄8”-16 Plastic Rod Manufactured from injection molded white plastic. Provides a clean installation for all threaded rod in interior areas visible to the occupants.

Part # 900-1680

44

Description Plastic Rod Button WH 3⁄8”

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

Eliminator Adjustable Drop Nipples Models ‘M’ & ‘F’

Merit Eliminator Adjustable Drop Nipples eliminate the need to cut drop nipples for positioning sprinkler assemblies flush to the finished ceiling. • Available in two models, female or male thread inlet, with three standard lengths with adjustment up to 3”(7.62cm). • UL Listed, FM Approved and BSA-NYC approved for installation to NFPA Bulletin 13 requirements. Vds Approved for the European market. • Cold formed from steel conforming to ASTM A-53, Grades E or F. • Inner nipples employ two (2) O-rings to provide added assurance of sealing. The ‘F’ Model is designed to keep O-rings from impinging upon the 1” inlet threads when fully retracted. • The bore of the outer nipple is precision formed to a tolerance of ±.001” while held to a micro-finish of 50 to provide for positive sealing of the O-rings. • Each unit is hydrostatically tested to insure O-ring integrity prior to shipment. • Each unit is marked with a lot number to insure full traceability. • Qualifying tests on all models are performed at 1500 psi, while various models are rated for 300 psi operation. • Threads are cut to be better than or equal to the requirements of ANSI B1.20.1, NPT. BSP or DIN 2999 threads also available. • Must be installed using anaerobic pipe dope. Part # M1.150 M3.150 ME3.150 F1.150 F2.150 F3.150 F3.175

Inlet NPT/ISO 1” Male 1” Male 1” Male 1” Female 1” Female 1” Female 1” Female

Outlet NPT/NPT ½” Female ½” Female ½” Female ½” Female ½” Female ½” Female ¾” Female

Min. Length

Max. Length

Max. Adjust

4.125” 6.125” 7.875” 3.500” 4.500” 5.500” 6.820”

5.125” 9.125” 10.875” 4.500” 6.500” 8.500” 10.000”

1.00” 3.00” 3.00” 1.00” 2.00” 3.00” 3.00”

Merit Weld-Miser Tee-Let Welding Branch Outlet Fittings • Tee-Let welding outlet fittings are manufactured from highly weldable steel which conforms to the chemical and physical requirements of ASTM A-53, Grades A or B, Type E. Ease of installation is assured when automatic welding equipment is used to install Merit Tee-Lets. • Threads are cut in accordance with the requirements of ANSI B1.20.1, 300 lb. class, national standard for tapered pipe threads. BS21:1985 BSPT threads are available. • Tee-Let threaded and grooved welded outlet fittings are UL/ULC Listed, and FM Approved for use in the fire sprinkler systems installed in accordance with the requirements of NFPA Bulletin 13. They are rated for 300 psi operation in fire sprinkler systems, and higher pressures in other non-critical pipings systems. Send for pressure ratings per ASME/ANSI B31. • Tee-Lets are offered in a wide variety of header sizes. The considered head sizes show in the charts allow the fittings to be installed on more than one header size, while permitting the first size listed to fit the header perfectly, while a small gap along the longitudinal centerline of the header will appear for the second size listed. • All sizes available.

www.lipipe.com Saving You Time and Money Through Service!

45

Buildex Sammys Screws

Hanger & Anchoring System The original threaded rod anchoring system for suspending threaded rod vertically in fire protection and other pipe hanging applications. Sammys are available in a variety of styles for hanging in wood, steel and concrete. The vertical, horizontal and sidewinder models allow you to hang pipe where you need it, saving you time and lowering your installation costs.

Sammys XPRESS The ultimate threaded rod anchoring system for suspending threaded rod vertically into metal decks and purlin where panel lining, insulation and light weight concrete are installed. A complete system, no retaining nut required. Installs in seconds, saves time and installation costs.

Part # Model WOOD APPLICATIONS 900-0590 GST20 900-0690 GST30 900-0630 SWG20 STEEL APPLICATIONS 900-0600 DSTR1 900-0610 SWDR1 CONCRETE APPLICATIONS 900-0580 CST20 XPRESS APPLICATIONS 900-4300 XP20 900-4450 SXP20 INSTALLATION TOOLS 900-0660 100 (BLACK) 900-0670 101 (RED) 900-4310 XPIT

Description

Approvals

3⁄8” Rod, ¼” x 2” (Vertical) 3⁄8” Rod, ¼” x 3” (Vertical) 3⁄8” Rod, ¼” x 2” (Sidewinder)

UL/FM UL/FM UL

3⁄8” Rod, ¼” - 20x1” (Vertical) 3⁄8” Rod, ¼” - 20x1” (Sidewinder)

UL/FM UL/FM

3⁄8” Rod, 5⁄16” x 1½” (Vertical)

FM

XPress Vertical Anchor XPress Swivel Anchor

UL/FM UL

Sammys Drive Socket (Vertical) Sammys Drive Socket (Sidewinder) Sammys XPress-It Installation Tool

-

Dektite Pipe Flashings

As Required by NFPA 13 2007 Chapter 8.4.10 • • • •

EPDM and Silicone will not crack or break. One piece construction is easy to install. EPDM has a continuous service temperature range of -65˚F to +250˚F. Silicone has a continuous service temperature range of -40˚F to +350˚F.

DEKTITE

CLEARANCE HOLE

INSULATED FREEZER STRUCTURE

DRY SPRINKLER

46

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670

CREDIT APPLICATION Long Island Pipe Supply, Inc.™ (LIP) T. 516-222-8008 • F. 516-222-9234 586 Commercial Avenue, Garden City, NY 11530

Long Island Pipe Supply of Massachusetts, Inc., 210 Ricciuti Drive, Quincy, MA 02169 Long Island Pipe Supply of New Jersey, Inc., 1050 Broadway, Westville, NJ 08093 Long Island Pipe Supply, Inc., 58-58 56th Street, Maspeth, NY 11378 Long Island Pipe Supply of Maryland, Inc., 6711 Baymeadow Drive - Suite E2, Glen Burnie, MD 21060 Long Island Pipe Supply of Albany, Inc., 60 Cohoes Avenue, Green Island, NY 12183 Long Island Pipe Supply of Connecticut, Inc., 1220 Kennedy Road - Suite 2, Windsor, CT 06095 Long Island Pipe Supply of New Hampshire, Inc., 50B Northwestern Drive - Unit 6, Salem, NH 03079 Long Island Pipe Supply, Inc., 729 Hicks Street, Brooklyn, NY 11231 Long Island Pipe Supply of Rhode Island, Inc., 1195-B Broad Street, Providence, RI 02905

Credit Application

Salesman’s Name Date

(Please Mail Original)

Full Legal Name: Business Address: Own or Rent (Circle One) Contractor’s Lic.#: A/P Contact: Submitted By: Business Phone: Fax#: Federal I.D.#: Type of Business (Please Circle One): Supply House Sprinkler Center Hospital Plumbing Center Tax Status (Please Circle One): Resale Contractors Exempt Exempt Organization **Please Forward Exempt Certificate With Completed Application**

Years at Present Location: Year Business Started: Type of Organization (Please Circle One): Corporation LLC Individual Resale#:

Partnership

**Officers/Partners**

Name:

Title:

Home Address:

SS# (Must Have)

Phone#

D.O.B.

A) B) C) **Banking References(Include Acct# and Contact)**

Bank Name & Address: Checking Acct#:

Phone#: Contact Name:

Savings Acct#:

**Trade References(Include Contact Name)**

A) B) C) Vehicles ID#: Lic.#:

Phone#: Phone#: Phone#: (Attach additional sheets if necessary for all vehicles) Own or Lease: Make: Model: Year: Credit Limit Requested:

In making this application for credit, the customer acknowledges receipt of L.I.P.’s, and its Subsidiaries and/or Affiliates’, terms of sale as stated on the reverse side of this application and agrees to pay all invoices in accordance with such terms. In addition Customer agrees to pay a service charge of 1½% per month, which is an annual percentage rate of 18%, on all overdue balances. In the event a law suit is necessary to collect any amount, the Customer agrees to pay the Seller’s attorney fees and costs including attorney’s fees for appeal.

By signing this application, Customer represents that the information contained herein is true and correct.

Personal Guarantee of account of:

Date:

I/We, the undersigned, hereby personally, jointly and severally guarantee(s) payment of all invoices and other charges as set forth above, and understand payments on accounts will be applied first against the oldest open invoices.

Signature: Signature: Signature:

Print Name: Print Name: Print Name: **PLEASE SEE REVERSE SIDE FOR TERMS & CONDITIONS** *Terms And Conditions* Terms: Net 30 Days

www.lipipe.com Saving You Time and Money Through Service!

47

TERMS

AND

CONDITIONS

Long Island Pipe Supply, Inc.™ Accounts over 30 days will be charged 1½% interest per month (18% per annum). Completion of all orders accepted and fulfillment of all agreements or contracts entered into are to any delay which might be occasioned by strikes, fires, accidents or other causes whether or not beyond our control and L.I.P., all Subsidiaries and/or Affiliates shall not be liable for any consequential damages arising from any such delay. We guarantee products which are manufactured by L.I.P., or its Subidiaries and/or Affiliates, and will replace those having manufacturing defects, when used in the service of which we recommend them. No charge for labor or expense required to repair defective goods, the measure of the damage is the replacement of the defective goods or the cost of said goods only. All allegedly defective goods must be returned as a condition of replacement or credit. No goods will be taken back and credited unless our consent has been first obtained, and accompanied by a return authorization memo. All products returned will be covered by the manufacturer’s warranty only. Credit will only be allowed on the basis of prices agreed upon, less 20% to cover handling costs, less any costs of putting in salable condition, and less transportation charges on original and return shipments. Orders for fabricated goods are not subject to cancellation for any reason whatsoever after work has been started on them, except upon agreement to make payment for all work which has been performed. All promises of shipment will be as closely estimated as possible. We use our efforts in every case to ship within the time promised, but cannot guarantee to do so. All claims for shortage must be made on receipt of goods. Stenographic and clerical errors are subject to corrections. Upon opening and/or maintaining an account with L.I.P., or any of its Subsidiaries and/or Affiliates, you hereby agree that all disputes, including those arising as a result of your nonpayment may be submitted to New York State courts located in Nassau County (including Nassau County district courts). Any claims against L.I.P., and/or any of its Subsidiaries and/or Affiliates must be brought, if at all, in the Supreme or District court of the State of New York, County of Nassau. In the event your account is placed with an attorney for collections, you will be responsible for attorney’s fees in the amount not less than 25% of your outstanding balance. These terms may be modified from time to time. In such event you will be bound by such revised terms unless you elect in writing, within five (5) business days of receipt of said revised to close your account and your account is paid in full within sixty (60) days thereafter.

X

Acceptance of L.I.P., and its Subsidiaries and/or Affiliates terms & conditions.

X

Dated

Long Island Pipe Supply, Inc. Long Island Pipe Supply of Maspeth, Inc. Long Island Pipe Supply of Massachusetts, Inc. Long Island Pipe Supply of New Jersey, Inc. Long Island Pipe Supply of Maryland, Inc. Long Island Pipe Supply of Connecticut, Inc. Long Island Pipe Supply of Albany, Inc. Long Island Pipe Supply of New Hampshire, Inc. Long Island Pipe Supply of Brooklyn, Inc. Long Island Pipe Supply of Rhode Island, Inc. Albany Pipe & Nipple Manufacturing, Inc. National Grooved of America, LLC. Lansdale International, LLC.

48

Garden City, NY 516-222-8008 • Quincy, MA 617-472-4575 • Westville, NJ 08093 856-742-9000 • Maspeth, NY 718-456-7877 • Glen Burnie, MD 410-787-2810 Albany, NY 518-270-2159 • Windsor, CT 860-688-1780 • Salem, NH 603-685-3200 • Brooklyn, NY 718-669-7600 • Providence, RI 02905 401-490-9670