LOAD BEARING ROLLER ASSEMBLIES

LOAD BEARING ROLLER ASSEMBLIES CAM FOLLOWERS: BEARING TYPE: Needle Bearings Available from 2” to 20” roller body diameter, these units provide maxim...
Author: Bernard Page
4 downloads 0 Views 4MB Size
LOAD BEARING ROLLER ASSEMBLIES

CAM FOLLOWERS: BEARING TYPE: Needle Bearings Available from 2” to 20” roller body diameter, these units provide maximum radial capacity in lower speed applications. An extra thick roller body provides high load carrying capability by minimizing distortion.

DCB ROLLERS BEARING TYPE: Cylindrical Roller Bearings Available from 2” to 10” roller body diameter, these units provide maximum dynamic radial load capacity and allow for incidental thrust loads. DCB Rollers also offer rubber seals and are a drop-in replacement for Cam Followers.

XR ROLLERS BEARING TYPE: Ball or Tapered Roller Bearings Available from 1.5” to 10” roller body diameter, PCI XR Rollers provide the rugged seals and thrust load capacity of a PCI Track Roller in the sizing of a Cam Follower, for an easy, maintenance-free upgrade.

LOAD BEARING ROLLER ASSEMBLIES TRACK ROLLERS BEARING TYPE: Ball or Tapered Roller Bearings Available from 1” to 20” roller body diameter, PCI Track Rollers provide balanced radial and thrust load capacity, maximized sealing provisions and profile options which include Flanged, Double Flanged, V-Grooved, UGrooved and Channel & I-Beam profiles. On stud type versions, a steel dust cover provides added protection against contamination.

316 STAINLESS STEEL 316 Stainless Steel for ultimate corrosion resistance Fluorocarbon seals for chemical resistance

NON-METALLIC Economical corrosion resistant alternative to Stainless Eliminates noise by eliminating metal-to-metal contact Improved design for added contamination exclusion

HIGH TEMPERATURE Rated for operation up to 350°F Available as regreasable or sealed for life

TOP DRIVE ROLLERS PCI “TDR” Top Drive Rollers are a drop-in replacement for units found on top drive equipment commonly used in the oilfield. TDR Rollers are available in several configurations with stock availability.

CUSTOM SOLUTIONS Available in all roller body diameters, PCI manufactures special/custom assemblies in all shapes and sizes using a variety of internal bearing configurations. And, to make this a viable option, PCI delivers these rollers in industry leading turn-around times and requires no piece minimums.

Understanding Application Needs Load Bearing Roller Assemblies The answers to the following questions help to describe the demands of an application. Gaining an understanding of an application’s demands is the first step in obtaining choices for a solution.

What are the Application Loads? Load bearing roller assemblies are designed to support moving (dynamic) loads or stationary (static) loads. The load that the rollers will be supporting can be communicated using the following terminology:

THRUST LOAD Load applied parallel with the bearing bore or axis of rotation

RADIAL LOAD Load applied 90 degrees to the bearing bore or axis of rotation

Rollers in many applications experience a load comprised of radial and thrust load which can be referred to as Combination Load. This load may not be intentionally designed into the application, but a combination load can be created as a result of misalignment or other functions within the application. Linear Speed (Ft/min) (M/sec)

What are the Applied Speeds? The rate at which the moving object will be travelling can be communicated in two different ways: in distance per time (FPM, M/sec) for linear movement or in revolutions per minute (RPM) for rotational movement. Depending on the type of application, one of these will best communicate the applied speed.

Radial Speed (RPM)

Freedom of Motion

What are the Needs for Location? Constraint of Movement

Load bearing roller assemblies facilitate the location of moving loads or the contact surface by allowing for specific movements and by limiting unwanted ones. Applications must be reviewed to determine the required freedom of motion and the desired constraint of movement.

What is the Application Environment? Environmental conditions can impact the life and performance of load bearing roller assemblies. Applications with exposure to the following substances may require special consideration: chemicals, vapors, water, temperature and solid particulate.

Chemicals

Vapor

H20

Temperature

Particulate

Designing Application Solutions Load Bearing Roller Assemblies It is important to account for the physical constraints within an application. The following diagrams outline common dimensional requirements and the terms by which they are referred.

Stud Type

Yoke Type

In addition to complying with physical constraints, rollers can be manufactured to accommodate multiple mounting arrangements. The two most common mounting arrangements are Stud Type and Yoke Type, both indicated in the Flanged Yoke diagrams below: Mounting Rail V-Grooved Roller Mounting Rail Hex Jam Nut

Plain Roller

Mounting Rail

Mounting Rail

Roller

Yoke Shaft Crowned Yoke Roller

Lock Washer

Through-Hole Mount Stud Type

Blind Mount Stud Type

Hex Lock Jam Washer Nut

Hex Jam Nut

Captured Mount Yoke Type

Lock Washer

Bolt

Through-Hole Mount Yoke Type

For applications requiring precision alignment between a roller and the mating contact surface, an eccentric style roller may be used to achieve uniform contact.

PCI Load Bearing Roller Assembly solutions can be manufactured with a variety of body profiles to help address concerns with debris, location and rail profile. Some examples include:

Channel & I-Beam

Flanged

Double Flanged

U-Grooved

V-Grooved

Reverse V-Grooved

Crowned

Symptoms Include: Fatigue, Anxiety, Frustration etc.

Avoid Catalogitis.

Call PCI Today! 989.358.6148 For additional information and to explore all of the choices for your solution, contact PCI-ProCal Inc. at 989.358.6148 or visit us on the web at www.pcimfg.com.

PCI is empowering industry with choices for a solution by breaking the limits of the catalog through: PRODUCT KNOWLEDGE

APPLICATION ASSISTANCE

Having a thorough understanding of what it takes to manufacture a successful roller enables PCI to provide you with multiple viable choices for your solution. Choices include pre-engineered products, modified units or products engineered specifically for your needs. PCI provides you the maximum number of viable choices so you can make the best decision for your economic and delivery requirements.

Performing market research enables PCI to offer unique market solutions that fulfill the specific requirements of individual markets including the petrochemical, wood, marine, mining and food processing industries.

“CATALOG-LIKE” AVAILABILITY Along with an innovative design, a solution needs desirable delivery to be viable. PCI “Catalog-Like” availability secures your application solution when you need it. Pre-Engineered units IN STOCK Modified units ship in 1 Week Industry Leading Delivery for Custom Units, including EXPEDITES

THICK SECTION ROLLER BODY

CASE HARDENED ROLLER BODY

Proven toughness under heavy radial loads

Maintains the integrity of the assembly by preventing pre-mature fracture under shock loads

MOLY-FILLED NYLON LIP SEALS

FULL COMPLEMENT NEEDLE BEARINGS

PREMIUM SYNTHETIC LUBRICANT

Dual function seal provides low level thrust capacity and contamination exclusion

Reliable performance under moderate to heavy radial dynamic loads.

High performance grease resistant to break down to minimize downtime

EASY INSTALLATION BORE Efficient yoke roller installation by eliminating the need for tedious installation methods.

BLACK OXIDE FINISH PCI Cam Followers have a black oxide finish on all external surfaces.

989.358.6148 www.pcimfg.com

LOAD BEARING ROLLER ASSEMBLIES Cam Follower Assemblies Part Number Nomenclature

SERIES S– Standard Stud Type H – Heavy Stud Type Y – Yoke Type

ROLLER BODY PROFILE None – Plain / Cylindrical C – Crowned / Spherical

CAM FOLLOWER BORE TYPE (for Stud type rollers only) None – Concentric Stud Type E – Eccentric Stud Type

ROLLER SIZE Imperial – Inches (Decimals)

S ___ C ___ CF __

E - __ 2 . ____ 50 - __ S ___ H - ____ __

SEALING S – Sealed

SLOT TYPE None – Screwdriver Slot H – Hex Socket

ALTERNATE FITTING THT – Threaded Lubrication Fitting (Units 4” Diameter and Smaller)

IMPROVED SEALING

CASE HARDENED ROLLER BODY

Rubber lip seals with expanded grease barrier maximize protection of rolling elements

Maintains the integrity of the assembly by preventing pre-mature fracture under shock loads

GUIDED ROLLING ELEMENTS

QUANTITY & SIZE OF ROLLING ELEMENTS

Provides efficient handling of intermittent combination loads by reducing skewing of the rolling elements and minimizing internal contact points.

Efficient yoke roller installation by eliminating the need for tedious installation methods.

GREASE STORAGE Maximizes roller life by offering up to 20% more grease storage than competitive designs

ROLLING ELEMENT PROFILE Lengthens component life by minimizing fatigue of the load bearing surfaces

BLACK OXIDE FINISH PCI DCB Rollers have a black oxide finish on all external surfaces.

989.358.6148 www.pcimfg.com

LOAD BEARING ROLLER ASSEMBLIES DCB Roller Assemblies Part Numbering Nomenclature

SERIES None – Standard Stud H – Heavy Stud

ROLLER BODY PROFILE P– Plain / Cylindrical C – Crowned / Spherical

DOUBLE ROW CYLINDRICAL BEARING ROLLER BORE TYPE None – Concentric Stud Type E – Eccentric Stud Type Y – Yoke Type

ROLLER SIZE Imperial – (Inches: Decimals)

H __ C __

DC __ - __ 2 . ____ 50 - ___ HT - __ R - __ ____

TEMPERATURE None – Standard Temperature HT – High Temperature

RELUBRICATION None – Lube for Life R – Regreasable

HEX PROVISIONS None – Hex in Roller End H – Hex in Both Ends

DCB Roller Assemblies Double Row Cylindrical Bearing Rollers

0

PCI has been developing Load Bearing Roller Assembly solutions for more than 20 years. An integral part of our success has been our commitment to understanding the ever-changing needs of our valued customers and developing solutions that turn application hurdles into success stories. It is this critical interaction that has fueled the development of our Double-Row Cylindrical Bearing Roller Assemblies, the PCI DCB Roller. PCI’s unique DCB design addresses performance problems associated with traditional Cam Follower and Track Roller products while offering several unique advantages over competitive alternatives.

LOAD ACCOMODATION APPLICATION MISALIGNMENT Standard Cam Followers are very effective at accommodating radial load; however, internal design significantly limits their capacity to handle other types of load commonly found in real world applications. One of the most common is combination load produced from application misalignment. Combination load is comprised of both radial and thrust loads and is a large contributor to premature failure of Cam Followers. PCI DCB Rollers are designed to effectively accommodate combination load, providing a solution to performance problems associated with misalignment. Pictured below are common misalignment examples:

ALIGNED ALIGNED

MISALIGNED

MISALIGNED

DYNAMIC LOAD CAPACITY Traditional Load Bearing Roller Assembly products offer either significant radial capacity at low speeds or increased speed accommodation at reduced radial capacities. The PCI DCB Roller is designed to provide significant radial load capacity while operating at elevated speeds, a mixture of loads in a size package that no other Cam Follower or Track Roller product can offer.

MAINTENANCE FREE OPERATION Most Cam Follower products are engineered to be re-lubricated at regular intervals in order to operate effectively. In applications where moderate to high levels of contaminant are present, the frequency of re-lubrication can be significant. DCB Rollers reduce maintenance costs by addressing two primary design characteristics:

SEALING PROVISIONS Needle Bearing Cam Follower products utilize nylon lip seals designed to provide low-level thrust capacity to the roller while providing some protection against contamination failure. Because of their dual-function purpose, nylon seals sacrifice sealing characteristics, struggling to compete against rubber seals in protection against external contamination. By engineering thrust accommodation into the internal design of the bearing, PCI DCB Rollers eliminate the need for the use of a dual purpose seal. This design improvement allows DCB Roller products the use of rubber lip seal technology as its protection against contamination, providing an industry proven solution to the problems commonly associated with Cam Follower designs.

DCB ROLLER

CAM FOLLOWER

GREASE CAPACITY Internal design constraints limit traditional Cam Follower products in providing only a minimal amount of grease capacity to the bearing assembly. The minimal amount of lubrication limits the life of the Cam Follower once grease oxidation and break-down occur. PCI DCB Rollers are engineered with optimized grease capacity to ensure long-term operation, reducing the frequency of maintenance procedures. DCB Rollers provide up to 5 times the amount of grease capacity of standard Cam Follower products to ensure adequate lubrication for the assembly long after grease begins to oxidize.

CAM FOLLOWER EQUIVALENT

CASE HARDENED ROLLER BODY

Drop-in dimensional replacement for needle bearing Cam Followers

Maintains the integrity of the assembly by preventing pre-mature fracture under shock loads

RUBBER LIP SEALS

PREMIUM SYNTHETIC LUBRICANT

Maximize protection of the bearing elements from external contamination

High performance grease resistant to break down to minimize downtime

MATCHED SET OF TAPERED ROLLER BEARINGS* Maximum thrust load paired with significant radial load in a precision bearing package

*Features dependent on size of unit. See specifications for details.

989.358.6148 www.pcimfg.com

LOAD BEARING ROLLER ASSEMBLIES “XR” Roller Assemblies Part Number Nomenclature

BODY MATERIAL None – Steel N – Non-Metallic

ROLLER BODY PROFILE P– Plain / Cylindrical C – Crowned / Spherical

“XR” Roller BORE TYPE None – Concentric Stud Type E – Eccentric Stud Type

ROLLER SIZE Imperial: Inches (Decimals)

P ____ XR __ E - 2__. ____ 50 __ - ___ - ___ HT - __ - __ __ ___

CAPACITY None – Standard E – Extra Capacity A – Alternate

STEEL TYPE None – Carbon Steel SS – Stainless Steel

TEMPERATURE None – Standard Temperature HT – High Temperature

RELUBRICATION None – Lube for Life R – Regreasable

HEX PROVISIONS None – Hex in Roller End H – Hex in Both Ends

TIGHT FITTING DUST COVER

CASE HARDENED ROLLER BODY

Added protection against direct spray and contamination

Maintains the integrity of the assembly by preventing pre-mature fracture under shock loads.

PRECISION DEEP GROOVE BALL BEARINGS

MATCHED SET OF TAPERED ROLLER BEARINGS

Performance under high speeds and combination loads.

Maximum thrust load paired with significant radial load capacity in a precision bearing package.

RUBBER LIP SEALS Maximizes protection of the bearing elements from external contamination.

PREMIUM SYNTHETIC LUBRICANT

STRESSPROOF® STUD / INNER RACE

High performance grease resistant to break down to minimize downtime.

High strength material provides dependable performance under load.

989.358.6148 www.pcimfg.com

LOAD BEARING ROLLER ASSEMBLIES Track Roller Assemblies Part Number Nomenclature BODY MATERIAL None – Steel N – Non-Metallic

SIZING None – Imperial: Inches {Decimals} M – Metric {Millimeters}

ROLLER BODY PROFILE P– Plain / Cylindrical C – Crowned / Spherical F – Flanged FF – Double Flanged V – V-Grooved U – U-Grooved CIR – Channel & I-Beam WGR – Wire Guide

TRACK ROLLER “TR” is omitted for CIR & WGR units

BORE TYPE None – Concentric Stud Type E – Eccentric Stud Type

ROLLER SIZE Imperial: Inches (Decimals) Metric: Millimeters

F ____ TR E__ - __ 2 . ____ 50 __ E - ___ - ___ - __ R __ __ ___

CAPACITY None – Standard E – Extra Capacity A – Alternate

STEEL TYPE None – Carbon Steel SS – Stainless Steel

TEMPERATURE None – Standard Temperature HT – High Temperature

RELUBRICATION None – Lube for Life R – Regreasable

316 STAINLESS STEEL ROLLER BODY, STUD & DUST COVER*

440 STAINLESS STEEL PRECISION DEEP GROOVE BALL BEARINGS*

Maximum corrosion resistance and added protection against direct spray and contamination

Optimum balance of corrosion resistance and dynamic load capacity

FLUOROCARBON LIP SEALS

SYNTHETIC FOOD GRADE LUBRICANT

Maximizes protection of the bearing elements from high heat, chemicals and external contamination.

Food grade grease with resistance to chemicals and wash-out.

WHY USE PCI 316 STAINLESS STEEL ROLLERS? PCI® chooses to utilize 316 Stainless Steel materials for the exposed surfaces of our Stainless Steel Rollers. Most stainless cam follower products utilize 400 series stainless steel for these same surfaces. 316 Stainless has nearly 40% greater resistance to pitting corrosion than 400 series grades. If corrosion resistance is your goal, PCI 316 Stainless Steel Track Rollers & XR Rollers are your engineered stainless solution. *Features dependent on size and style of unit. See specifications for details.

989.358.6148 www.pcimfg.com

NON-METALLIC ROLLER BODY

ONE PIECE SOLID END CAP DESIGN* Solid protection of the bearing elements from external contaminants.

RUBBER LIP SEALS Maximizes protection of the bearing elements from external contamination.

Minimizes Rolling Noise Reduces Track Wear Eliminates Need for Track Lubrication

PRECISION DEEP GROOVE BALL BEARINGS Dependable performance under high speeds and combination loads.

Reduces Rolling Resistance FDA Compliant Material Reduces Likelihood of Metal-on-Metal Sparking

SYNTHETIC LUBRICANT High performance grease resistant to break down to minimize downtime.

HOW QUIET ARE PCI NON-METALLIC TRACK ROLLERS? PCI’s Non-Metallic roller body design absorbs vibration and reduces the likelihood of metal on metal sparking to provide reliable Non-Sparking, Quiet Performance. PCI® Non-Metallic Rollers are more than 10 dBa quieter than their metallic counterparts – that’s a 50% reduction in sound over traditional carbon steel Track Roller and Cam Follower products.

*Features dependent on size and style of unit. See specifications for details.

989.358.6148 www.pcimfg.com

TIGHT FITTING DUST COVER*

CASE HARDENED ROLLER BODY

Maximum protection against direct spray and contamination

Maintains the integrity of the assembly by preventing pre-mature fracture under shock loads.

FLUOROCARBON LIP SEALS

PRECISION HIGH TEMPERATURE DEEP GROOVE BALL BEARINGS

PREMIUM HIGH TEMPLUBRICANT

Lasting protection of the bearing elements in high temperatures.

Performance under high speeds and combination loads in a high temperature environment.

Performance in applications up to 350°F (Continuous)

EXTEND PERFORMANCE WITH RELUBE PCI High Temperature Rollers are available IN STOCK with regreasing provisions to maximize life in your demanding application. PCI High Temperature Rollers are supplied with wrench flats for easy installation and a readily accessible grease fitting located in the end of the stud for ease of maintenance. Add a “-R” suffix to the part number to Replenish & ReUse…Relube *Features dependent on size and style of unit. See specifications for details.

989.358.6148 www.pcimfg.com

Comparable Replacements for #30158767-04 / F76105 – 4” Diameter Top Drive Roller #30155438 / F76139 – 6” Diameter Top Drive Roller

TDR Series Roller Assembly Top Drive Rollers Double Row Cylindrical Roller Bearings / Needle Bearings

TDR-6.00

TDR-4.00 A

B

C

D

FL

F

H

R

SD

SL

T

Z

Stud Type Roller Stud TDR Roller Dia. Roller Dia. Stud Thread Thread Part Number +.000 Width +.000 Length Length Size -.001 -.001

Roller Hex Crown Shoulder Shoulder Width + Size Radius Dia. Length Shoulder Length

TDR-4.00-1 TDR-4.00-2 TDR-4.00-3 TDR-6.00-1 TDR-6.00-2 TDR-6.00-3 TDR-6.00-4 TDR-6.00-5

3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4

4.000 4.000 4.000 6.000 6.000 6.000 6.000 6.000

2.50 2.50 2.50 2.25 2.25 2.25 2.25 2.25

1.500 1.500 1.500 2.000 2.000 2.000 2.000 2.000

3.50 3.50 3.50 3.50 3.50 3.30 3.30 3.30

1.50 1 1/2 - 12 1.50 1 1/2 - 12 1.50 1 1/2 - 12 1.50 2 - 12 1.50 2 - 12 1.50 2 - 12 1.50 2 - 12 1.50 2 - 12

Basic Radial Basic Radial Max. Stud Type Dynamic Static Stud Clamping TDR Roller Load Rating Load Rating Capacity Torque Part Number (lbs) (lbs) (lbs) (in-lbs)* C Co TDR-4.00-1 TDR-4.00-2 TDR-4.00-3 TDR-6.00-1 TDR-6.00-2 TDR-6.00-3 TDR-6.00-4 TDR-6.00-5

47,200 47,200 30,270 47,200 47,200 30,270 30,270 47,200

67,200 67,200 89,540 67,200 67,200 89,540 89,540 67,200

19,100 19,100 19,100 50,250 50,250 50,250 50,250 50,250

2,250 2,250 2,250 2,250 2,250 2,250 2,250 2,250

30 30 30 48 48 48 48 48

2.3 2.3 2.9 2.3 2.3 2.9 2.9 2.3

0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03

2.53 2.53 2.53 2.28 2.28 2.28 2.28 2.28

Lube Size 1/8-27 NPT 1/8-27 NPT 1/8-27 NPT 1/8-27 NPT 1/8-27 NPT 1/8-27 NPT 1/8-27 NPT 1/8-27 NPT

Seal Type

Bearing Type

Finish

Approx. Roller Weight (lbs)

Rubber Lip Rubber Lip Moly-Filled Nylon Lip Rubber Lip Rubber Lip Moly-Filled Nylon Lip Moly-Filled Nylon Lip Rubber Lip

FC DCRB FC DCRB-SS FC Needle FC DCRB FC DCRB-SS FC Needle FC Needle FC DCRB

Thin Dense Chrome Thin Dense Chrome Thin Dense Chrome Thin Dense Chrome Thin Dense Chrome Thin Dense Chrome Black Oxide Thin Dense Chrome

8.88 8.88 9.31 19.62 19.62 19.85 19.85 19.46

ADDITIONAL NOTES *For lubricated threads, use half the maximum clamping torque value shown. FC DCRB: Full Compliment Double Row Cylindrical Roller Bearings– Alloy Steel FC DCRB-SS: Full Compliment Double Row Cylindrical Roller Bearings– 440C Stainless Steel FC Needle: Full Compliment Needle Roller Bearings – Alloy Steel Lubrication Fitting included with roller assembly. Jam Nut & Lock Washer sets are available at an additional cost. Specifications subject to change without notice.

Cross Reference Charts In Alphabetical Order by Reference Number

CCF 2 S CCF 2 SB CCF 2 1/4 S CCF 2 1/4 SB CCF 2 1/2 S CCF 2 1/2 SB CCF 2 3/4 S CCF 2 3/4 SB CCF 3 S CCF 3 SB CCF 3 1/4 S CCF 3 1/4 SB CCF 3 1/2 S CCF 3 1/2 SB CCF 4 S CCF 4 SB CCF 5 SB CCF 6 SB CCF 7 SB CCF 8 SB CCF 9 SB CCF 10 SB CCFD 2 CCFD 2 1/4 CCFD 2 1/2 CCFD 2 3/4 CCFD 3 CCFD 3 1/4 CCFD 3 1/2 CCFD 4 CCFD 5 CCFD 6 CCFE 2 S CCFE 2 SB CCFE 2 1/4 S CCFE 2 1/4 SB CCFE 2 1/2 S CCFE 2 1/2 SB CCFE 2 3/4 S CCFE 2 3/4 SB CCFE 3 S CCFE 3 SB CCFE 3 1/4 S CCFE 3 1/4 SB CCFE 3 1/2 S CCFE 3 1/2 SB CCFE 4 S CCFE 4 SB CCFH 2 S CCFH 2 SB CCFH 2 1/4 S CCFH 2 1/4 SB CCFH 2 1/2 S CCFH 2 1/2 SB CCFH 2 3/4 S CCFH 2 3/4 SB CCFH 3 S CCFH 3 SB CCFH 3 1/4 S CCFH 3 1/4 SB CCFH 3 1/2 S CCFH 3 1/2 SB CCFH 4 S

McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG

SCCF-2.00-S SCCF-2.00-SH SCCF-2.25-S SCCF-2.25-SH SCCF-2.50-S SCCF-2.50-SH SCCF-2.75-S SCCF-2.75-SH SCCF-3.00-S SCCF-3.00-SH SCCF-3.25-S SCCF-3.25-SH SCCF-3.50-S SCCF-3.50-SH SCCF-4.00-S SCCF-4.00-SH SCCF-5.00-SH SCCF-6.00-SH SCCF-7.00-SH SCCF-8.00-SH SCCF-9.00-SH SCCF-10.00-SH CDC-2.00 CDC-2.25 CDC-2.50 CDC-2.75 CDC-3.00 CDC-3.25 CDC-3.50 CDC-4.00 CDC-5.00 CDC-6.00 SCCFE-2.00-S SCCFE-2.00-SH SCCFE-2.25-S SCCFE-2.25-SH SCCFE-2.50-S SCCFE-2.50-SH SCCFE-2.75-S SCCFE-2.75-SH SCCFE-3.00-S SCCFE-3.00-SH SCCFE-3.25-S SCCFE-3.25-SH SCCFE-3.50-S SCCFE-3.50-SH SCCFE-4.00-S SCCFE-4.00-SH HCCF-2.00-S HCCF-2.00-SH HCCF-2.25-S HCCF-2.25-SH HCCF-2.50-S HCCF-2.50-SH HCCF-2.75-S HCCF-2.75-SH HCCF-3.00-S HCCF-3.00-SH HCCF-3.25-S HCCF-3.25-SH HCCF-3.50-S HCCF-3.50-SH HCCF-4.00-S

CCFH 4 SB CCFH 5 SB CCFH 6 SB CCFH 7 SB CCYR 2 S CCYR 2 1/4 S CCYR 2 1/2 S CCYR 2 3/4 S CCYR 3 S CCYR 3 1/4 S CCYR 3 1/2 S CCYR 4 S CCYR 5 S CCYR 6 S CCYR 7 S CCYR 8 S CCYR 9 S CCYR 10 S CCYRD 3 CCYRD 3 1/4 CCYRD 3 1/2 CCYRD 4 CCYRD 5 CCYRD 6 CF 2 S CF 2 SB CF 2 1/4 S CF 2 1/4 SB CF 2 1/2 S CF 2 1/2 SB CF 2 3/4 S CF 2 3/4 SB CF 3 S CF 3 SB CF 3 1/4 S CF 3 1/4 SB CF 3 1/2 S CF 3 1/2 SB CF 4 S CF 4 SB CF 5 SB CF 6 SB CF 7 SB CF 8 SB CF 9 SB CF 10 SB CFD 2 CFD 2 1/4 CFD 2 1/2 CFD 2 3/4 CFD 3 CFD 3 1/4 CFD 3 1/2 CFD 4 CFD 5 CFD 6 CFE 2 S CFE 2 SB CFE 2 1/4 S CFE 2 1/4 SB CFE 2 1/2 S CFE 2 1/2 SB CFE 2 3/4 S

McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG

HCCF-4.00-SH HCCF-5.00-SH HCCF-6.00-SH HCCF-7.00-SH YCCF-2.00-S YCCF-2.25-S YCCF-2.50-S YCCF-2.75-S YCCF-3.00-S YCCF-3.25-S YCCF-3.50-S YCCF-4.00-S YCCF-5.00-S YCCF-6.00-S YCCF-7.00-S YCCF-8.00-S YCCF-9.00-S YCCF-10.00-S CDCY-3.00 CDCY-3.25 CDCY-3.50 CDCY-4.00 CDCY-5.00 CDCY-6.00 SCF-2.00-S SCF-2.00-SH SCF-2.25-S SCF-2.25-SH SCF-2.50-S SCF-2.50-SH SCF-2.75-S SCF-2.75-SH SCF-3.00-S SCF-3.00-SH SCF-3.25-S SCF-3.25-SH SCF-3.50-S SCF-3.50-SH SCF-4.00-S SCF-4.00-SH SCF-5.00-SH SCF-6.00-SH SCF-7.00-SH SCF-8.00-SH SCF-9.00-SH SCF-10.00-SH PDC-2.00 PDC-2.25 PDC-2.50 PDC-2.75 PDC-3.00 PDC-3.25 PDC-3.50 PDC-4.00 PDC-5.00 PDC-6.00 SCFE-2.00-S SCFE-2.00-SH SCFE-2.25-S SCFE-2.25-SH SCFE-2.50-S SCFE-2.50-SH SCFE-2.75-S

CFE 2 3/4 SB CFE 3 S CFE 3 SB CFE 3 1/4 S CFE 3 1/4 SB CFE 3 1/2 S CFE 3 1/2 SB CFE 4 S CFE 4 SB CFH 2 S CFH 2 SB CFH 2 1/4 S CFH 2 1/4 SB CFH 2 1/2 S CFH 2 1/2 SB CFH 2 3/4 S CFH 2 3/4 SB CFH 3 S CFH 3 SB CFH 3 1/4 S CFH 3 1/4 SB CFH 3 1/2 S CFH 3 1/2 SB CFH 4 S CFH 4 SB CFH 5 SB CFH 6 SB CFH 7 SB CH64L CH64LW CH72L CH72LW CH80L CH80LW CH88L CH88LW CH96L CH96LW CH104L CH104LW CH112L CH112LW CH128L CH128LW CH160LW CH192LW CH224LW CLRY-1-1/2 CLRY-1-3/4 CLRY-2 CLRY-2-1/4 CLRY-2-1/2 CLRY-2-1/2-7 CLRY-3 CLRY-3-1/4 CLRY-3-1/2 CLRY-4 CLRY-5 CLRY-6 CLRY-7 CLRY-8 CLRY-9 CLRY-10

McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb

SCFE-2.75-SH SCFE-3.00-S SCFE-3.00-SH SCFE-3.25-S SCFE-3.25-SH SCFE-3.50-S SCFE-3.50-SH SCFE-4.00-S SCFE-4.00-SH HCF-2.00-S HCF-2.00-SH HCF-2.25-S HCF-2.25-SH HCF-2.50-S HCF-2.50-SH HCF-2.75-S HCF-2.75-SH HCF-3.00-S HCF-3.00-SH HCF-3.25-S HCF-3.25-SH HCF-3.50-S HCF-3.50-SH HCF-4.00-S HCF-4.00-SH HCF-5.00-SH HCF-6.00-SH HCF-7.00-SH HCCF-2.00-S HCCF-2.00-SH HCCF-2.25-S HCCF-2.25-SH HCCF-2.50-S HCCF-2.50-SH HCCF-2.75-S HCCF-2.75-SH HCCF-3.00-S HCCF-3.00-SH HCCF-3.25-S HCCF-3.25-SH HCCF-3.50-S HCCF-3.50-SH HCCF-4.00-S HCCF-4.00-SH HCCF-5.00-SH HCCF-6.00-SH HCCF-7.00-SH CTRY-1.50 CTRY-1.75 CTRY-2.00 CTRY-2.25 CTRY-2.50E CTRY-2.50 CTRY-3.00 CTRY-3.25 CTRY-3.50 CTRY-4.00 CTRY-5.00 CTRY-6.00 CTRY-7.00 CTRY-8.00 CTRY-9.00 CTRY-10.00

CRBC 2 CRBC 2 1/4 CRBC 2 1/2 CRBC 2 3/4 CRBC 3 CRBC 3 1/4 CRBC 3 1/2 CRBC 4 CRBC 5 CRBC 6 CRBC 7 CRBC 8 CRBC 9 CRBC 10 CRBY 2 CRBY 2 1/4 CRBY 2 1/2 CRBY 2 3/4 CRBY 3 CRBY 3 1/4 CRBY 3 1/2 CRBY 4 CRBY 5 CRBY 6 CRBY 7 CRBY 8 CRBY 9 CRBY 10 CRS-32 CRS-36 CRS-40 CRS-44 CRS-48 CRS-52 CRS-56 CRS-64 CRSB-32 CRSB-36 CRSB-40 CRSB-44 CRSB-48 CRSB-52 CRSB-56 CRSB-64 CRSB-80 CRSB-96 CRSBC-32 CRSBC-36 CRSBC-40 CRSBC-44 CRSBC-48 CRSBC-52 CRSBC-56 CRSBC-64 CRSBC-80 CRSBC-96 CRSBCE-32 CRSBCE-36 CRSBCE-40 CRSBCE-44 CRSBCE-48 CRSBCE-52 CRSBCE-56

RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo

CDC-2.00 CDC-2.25 CDC-2.50 CDC-2.75 CDC-3.00 CDC-3.25 CDC-3.50 CDC-4.00 CDC-5.00 CDC-6.00 CDC-7.00 CDC-8.00 CDC-9.00 CDC-10.00 CDCY-2.00 CDCY-2.25 CDCY-2.50 CDCY-2.75 CDCY-3.00 CDCY-3.25 CDCY-3.50 CDCY-4.00 CDCY-5.00 CDCY-6.00 CDCY-7.00 CDCY-8.00 CDCY-9.00 CDCY-10.00 SCF-2.00-S SCF-2.25-S SCF-2.50-S SCF-2.75-S SCF-3.00-S SCF-3.25-S SCF-3.50-S SCF-4.00-S SCF-2.00-SH SCF-2.25-SH SCF-2.50-SH SCF-2.75-SH SCF-3.00-SH SCF-3.25-SH SCF-3.50-SH SCF-4.00-SH SCF-5.00-SH SCF-6.00-SH SCCF-2.00-SH SCCF-2.25-SH SCCF-2.50-SH SCCF-2.75-SH SCCF-3.00-SH SCCF-3.25-SH SCCF-3.50-SH SCCF-4.00-SH SCCF-5.00-SH SCCF-6.00-SH SCCFE-2.00-SH SCCFE-2.25-SH SCCFE-2.50-SH SCCFE-2.75-SH SCCFE-3.00-SH SCCFE-3.25-SH SCCFE-3.50-SH

Cross Reference Charts In Alphabetical Order by Reference Number

CRSBCE-64 CRSBE-32 CRSBE-36 CRSBE-40 CRSBE-44 CRSBE-48 CRSBE-52 CRSBE-56 CRSBE-64 CRSC-32 CRSC-36 CRSC-40 CRSC-44 CRSC-48 CRSC-52 CRSC-56 CRSC-64 CRSCE-32 CRSCE-36 CRSCE-40 CRSCE-44 CRSCE-48 CRSCE-52 CRSCE-56 CRSCE-64 CRSE-32 CRSE-36 CRSE-40 CRSE-44 CRSE-48 CRSE-52 CRSE-56 CRSE-64 CS64L CS64LW CS64LWX CS72L CS72LW CS72LWX CS80L CS80LW CS80LWX CS88L CS88LW CS88LWX CS96L CS96LW CS96LWX CS104L CS104LW CS104LWX CS112L CS112LW CS112LWX CS128L CS128LW CS128LWX CS160LW CS192LW CS224LW CY64L CY72L CY80L

Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC

SCCFE-4.00-SH SCFE-2.00-SH SCFE-2.25-SH SCFE-2.50-SH SCFE-2.75-SH SCFE-3.00-SH SCFE-3.25-SH SCFE-3.50-SH SCFE-4.00-SH SCCF-2.00-S SCCF-2.25-S SCCF-2.50-S SCCF-2.75-S SCCF-3.00-S SCCF-3.25-S SCCF-3.50-S SCCF-4.00-S SCCFE-2.00-S SCCFE-2.25-S SCCFE-2.50-S SCCFE-2.75-S SCCFE-3.00-S SCCFE-3.25-S SCCFE-3.50-S SCCFE-4.00-S SCFE-2.00-S SCFE-2.25-S SCFE-2.50-S SCFE-2.75-S SCFE-3.00-S SCFE-3.25-S SCFE-3.50-S SCFE-4.00-S SCCF-2.00-S SCCF-2.00-SH SCCFE-2.00-SH SCCF-2.25-S SCCF-2.25-SH SCCFE-2.25-SH SCCF-2.50-S SCCF-2.50-SH SCCFE-2.50-SH SCCF-2.75-S SCCF-2.75-SH SCCFE-2.75-SH SCCF-3.00-S SCCF-3.00-SH SCCFE-3.00-SH SCCF-3.25-S SCCF-3.25-SH SCCFE-3.25-SH SCCF-3.50-S SCCF-3.50-SH SCCFE-3.50-SH SCCF-4.00-S SCCF-4.00-SH SCCFE-4.00-SH SCCF-5.00-SH SCCF-6.00-SH SCCF-7.00-SH YCCF-2.00-S YCCF-2.25-S YCCF-2.50-S

CY88L CY96L CY104L CY112L CY128L CY160L CY192L CY224L CYR 2 S CYR 2 1/4 S CYR 2 1/2 S CYR 2 3/4 S CYR 3 S CYR 3 1/4 S CYR 3 1/2 S CYR 4 S CYR 5 S CYR 6 S CYR 7 S CYR 8 S CYR 9 S CYR 10 S CYRD 3 CYRD 3 1/4 CYRD 3 1/2 CYRD 4 CYRD 5 CYRD 6 FCF 1 1/2 FCF 1 3/4 FCF 2 FCF 2 1/4 FCF 2 1/2 FCF 2 3/4 FCF 3 FCF 3 1/4 FCF 3 1/2 FCF 4 FCF 4 1/2 FCF 5 FCF 6 FCF 7 FCF 8 FCFE 1 1/2 FCFE 1 3/4 FCFE 2 FCFE 2 1/4 FCFE 2 1/2 FCFE 2 3/4 FCFE 3 FCFE 3 1/4 FCFE 3 1/2 FCFE 4 FCYR 3 FCYR 3 1/4 FCYR 3 1/2 FCYR 4 FCYR 4 1/2 FCYR 5 FCYR 6 FFLR-1-1/2-4 FFLR-2-1/2-4 FFLR-2-4

RBC RBC RBC RBC RBC RBC RBC RBC McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG Osb Osb Osb

YCCF-2.75-S YCCF-3.00-S YCCF-3.25-S YCCF-3.50-S YCCF-4.00-S YCCF-5.00-S YCCF-6.00-S YCCF-7.00-S YCF-2.00-S YCF-2.25-S YCF-2.50-S YCF-2.75-S YCF-3.00-S YCF-3.25-S YCF-3.50-S YCF-4.00-S YCF-5.00-S YCF-6.00-S YCF-7.00-S YCF-8.00-S YCF-9.00-S YCF-10.00-S PDCY-3.00 PDCY-3.25 PDCY-3.50 PDCY-4.00 PDCY-5.00 PDCY-6.00 FTR-1.50 FTR-1.75 FTR-2.00 FTR-2.25 FTR-2.50 FTR-2.75 FTR-3.00 FTR-3.25 FTR-3.50 FTR-4.00 FTR-4.50 FTR-5.00 FTR-6.00 FTR-7.00 FTR-8.00 FTRE-1.50 FTRE-1.75 FTRE-2.00 FTRE-2.25 FTRE-2.50 FTRE-2.75 FTRE-3.00 FTRE-3.25 FTRE-3.50 FTRE-4.00 FTRY-3.00 FTRY-3.25 FTRY-3.50 FTRY-4.00 FTRY-4.50 FTRY-5.00 FTRY-6.00 FFTR-1.50 FFTR-2.50 FFTR-2.00

FFLR-3-4 FLR-1 FLR-1-1/8 FLR-1-1/4 FLR-1-3/8 FLR-1-1/2 FLR-1-1/2-2 FLR-1-3/4 FLR-2 FLR-2-1/4 FLR-2-1/2 FLR-2-1/2-1 FLR-2-3/4 FLR-3 FLR-3-1/4 FLR-3-1/2 FLR-4 FLR-4-1/2 FLR-5 FLR-6 FLR-7 FLR-8 FLRC-2-1/2 FLRC-3 FLRC-4 FLRCE-2-1/2 FLRCE-3 FLRCE-4 FLRE-1 FLRE-1-1/8 FLRE-1-1/4 FLRE-1-3/8 FLRE-1-1/2 FLRE-1-3/4 FLRE-2 FLRE-2-1/4 FLRE-2-1/2 FLRE-2-1/2-4 FLRE-2-3/4 FLRE-3 FLRE-3-1/4 FLRE-3-1/2 FLRE-4 FLRE-4-1/2 FLRE-5 FLRE-6 FLRH-1 FLRH-1-1/4 FLRH-1-1/2 FLRH-2 FLRH-2-1/2 FLRY-1-1/2 FLRY-1-3/4 FLRY-2 FLRY-2-1/4 FLRY-2-1/2 FLRY-2-1/2-7 FLRY-2-3/4-7 FLRY-3 FLRY-3-1/4 FLRY-3-1/2 FLRY-4 FLRY-5

Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb

FFTR-3.00 FTR-1.00 FTR-1.125 FTR-1.25 FTR-1.375 FTR-1.50 FTR-1.50-2 FTR-1.75 FTR-2.00 FTR-2.25 FTR-2.50 FTR-2.50E FTR-2.75 FTR-3.00 FTR-3.25 FTR-3.50 FTR-4.00 FTR-4.50 FTR-5.00 FTR-6.00 FTR-7.00 FTR-8.00 CIR-3.00-1 CIR-4.00-1 CIR-5.00E-1 CIRE-3.00-1 CIRE-4.00-1 CIRE-5.00E-1 FTRE-1.00 FTRE-1.125 FTRE-1.25 FTRE-1.375 FTRE-1.50 FTRE-1.75 FTRE-2.00 FTRE-2.25 FTRE-2.50 FTRE-2.50E FTRE-2.75 FTRE-3.00 FTRE-3.25 FTRE-3.50 FTRE-4.00 FTRE-4.50 FTRE-5.00 FTRE-6.00 FTR-1.00-HT FTR-1.25-HT FTR-1.50-HT FTR-2.00-HT FTR-2.50-HT FTRY-1.50 FTRY-1.75 FTRY-2.00 FTRY-2.25 FTRY-2.50E FTRY-2.50 FTRY-2.75 FTRY-3.00 FTRY-3.25 FTRY-3.50 FTRY-4.00 FTRY-5.00

FLRY-6 FLRY-7 FLRY-8 FLRY-9 FLRY-10 H64L H64LW H72L H72LW H80L H80LW H88L H88LW H96L H96LW H104L H104LW H112L H112LW H128L H128LW H160LW H192LW H224LW HPC-26 HPC-30 HPC-32 HPC-35 HPC-40 HPC-40-1 HPC-47 HPC-50 HPC-52 HPC-62 HPC-62-1 HPC-72 HPC-76 HPC-80 HPC-85 HPC-90 HPC-100 HPC-100-1 HPC-125 HPC-150 HPC-200 HPCA-40 HPCA-50 HPCA-62 HPCA-62-2 HPCA-76 HPCA-80 HPCA-85 HPCA-90 HPCA-100 HPCA-125 HPCA-150 HPCA-200 HPCA-250 HPCE-26 HPCE-30 HPCE-32 HPCE-35 HPCE-40-1

Osb Osb Osb Osb Osb RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb

FTRY-6.00 FTRY-7.00 FTRY-8.00 FTRY-9.00 FTRY-10.00 HCF-2.00-S HCF-2.00-SH HCF-2.25-S HCF-2.25-SH HCF-2.50-S HCF-2.50-SH HCF-2.75-S HCF-2.75-SH HCF-3.00-S HCF-3.00-SH HCF-3.25-S HCF-3.25-SH HCF-3.50-S HCF-3.50-SH HCF-4.00-S HCF-4.00-SH HCF-5.00-SH HCF-6.00-SH HCF-7.00-SH MPTR-26 MPTR-30 MPTR-32 MPTR-35 MPTR-40 MPTR-40-1 MPTR-47 MPTR-50 MPTR-52 MPTR-62 MPTR-62-1 MPTR-72 MPTR-76 MPTR-80 MPTR-85 MPTR-90 MPTR-100 MPTR-100-1 MPTR-125 MPTR-150 MPTR-200 MPTRY-40 MPTRY-50 MPTRY-62 MPTRY-62-1 MPTRY-76 MPTRY-80 MPTRY-85 MPTRY-90 MPTRY-100 MPTRY-125 MPTRY-150 MPTRY-200 MPTRY-250 MPTRE-26 MPTRE-30 MPTRE-32 MPTRE-35 MPTRE-40-1

Cross Reference Charts In Alphabetical Order by Reference Number

HPCE-47 HPCE-50 HPCE-52 HPCE-62 HPCE-62-1 HPCE-72 HPCE-76-1 HPCE-80 HPCE-85 HPCE-90 HPCE-100 HPCE-125 HPCE-150 HPJ-26 HPJ-30 HPJ-32 HPJ-35 HPJ-40 HPJ-40-1 HPJ-47 HPJ-50 HPJ-52 HPJ-62 HPJ-62-2 HPJ-72 HPJ-76 HPJ-80 HPJ-85 HPJ-90 HPJ-100 HPJ-100-1 HPJ-125 HPJ-150 HPJ-200 HPJA-40 HPJA-50 HPJA-62 HPJA-62-2 HPJA-76 HPJA-80 HPJA-85 HPJA-90 HPJA-100 HPJA-125 HPJA-150 HPJA-200 HPJA-250 HPJE-26 HPJE-30 HPJE-32 HPJE-35 HPJE-40-1 HPJE-50 HPJE-52 HPJE-62-1 HPJE-76 HPJE-90 HPJE-100 HPJE-125 HPJE-150 HPV-26 HPV-32 HPV-40

Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb

MPTRE-47 MPTRE-50 MPTRE-52 MPTRE-62 MPTRE-62-1 MPTRE-72 MPTRE-76-1 MPTRE-80 MPTRE-85 MPTRE-90 MPTRE-100 MPTRE-125 MPTRE-150 MFTR-26 MFTR-30 MFTR-32 MFTR-35 MFTR-40 MFTR-40-1 MFTR-47 MFTR-50 MFTR-52 MFTR-62 MFTR-62-1 MFTR-72 MFTR-76 MFTR-80 MFTR-85 MFTR-90 MFTR-100 MFTR-100-1 MFTR-125 MFTR-150 MFTR-200 MFTRY-40 MFTRY-50 MFTRY-62 MFTRY-62-1 MFTRY-76 MFTRY-80 MFTRY-85 MFTRY-90 MFTRY-100 MFTRY-125 MFTRY-150 MFTRY-200 MFTRY-250 MFTRE-26 MFTRE-30 MFTRE-32 MFTRE-35 MFTRE-40-1 MFTRE-50 MFTRE-52 MFTRE-62-1 MFTRE-76 MFTRE-90 MFTRE-100 MFTRE-125 MFTRE-150 MVTR-26 MVTR-32 MVTR-40

HPV-62 HPV-62-1 HPV-76 HPV-100 HPV-100-1 HPV-125 HPVA-40 HPVA-50 HPVA-62 HPVA-62-2 HPVA-76 HPVA-100 HPVA-125 HPVA-150 HPVA-200 HPVA-250 HPVE-26 HPVE-32 HPVE-40 HPVE-62 HPVE-62-1 HPVE-76 HPVE-100 HPVE-125 MSHA-10 MSHA-15 MSHA-20 MSHA-25 MSHA-30 MSHA-45 MSHA-55 MSHA-70 NCF-2SB NCF-2-1/2SB NCF-3SB NCFE-2SB NCFE-2-1/2SB NCFE-3SB NCFY-2S NCFY-2-1/4S NCFY-2-1/2S NCFY-3S NCFY-4S PCF-1 1/2 PCF-1 3/4 PCF-2 PCF-2 1/4 PCF-2 1/2 PCF-2 3/4 PCF-3 PCF-3 1/4 PCF-3 1/2 PCF-4 PCF-4 1/2 PCF-5 PCF-6 PCF-7 PCF-8 PCFE-1 1/2 PCFE-1 3/4 PCFE-2 PCFE-2 1/4 PCFE-2 1/2

Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG McG

MVTR-62 MVTR-62-1 MVTR-76 MVTR-100 MVTR-100-1 MVTR-125 MVTRY-40 MVTRY-50 MVTRY-62 MVTRY-62-1 MVTRY-76 MVTRY-100 MVTRY-125 MVTRY-150 MVTRY-200 MVTRY-250 MVTRE-26 MVTRE-32 MVTRE-40 MVTRE-62 MVTRE-62-1 MVTRE-76 MVTRE-100 MVTRE-125 MYSH-10 MYSH-15 MYSH-20 MYSH-25 MYSH-30 MYSH-45 MYSH-55 MYSH-70 SCF-2.00-SH SCF-2.50-SH SCF-3.00-SH SCFE-2.00-SH SCFE-2.50-SH SCFE-3.00-SH YCF-2.00-S YCF-2.25-S YCF-2.50-S YCF-3.00-S YCF-3.25-S PTR-1.50 PTR-1.75 PTR-2.00 PTR-2.25 PTR-2.50 PTR-2.75 PTR-3.00 PTR-3.25 PTR-3.50 PTR-4.00 PTR-4.50 PTR-5.00 PTR-6.00 PTR-7.00 PTR-8.00 PTRE-1.50 PTRE-1.75 PTRE-2.00 PTRE-2.25 PTRE-2.50

PCFE-2 3/4 PCFE-3 PCFE-3 1/4 PCFE-3 1/2 PCFE-4 PCFE-4 1/2 PCFE-5 PCFE-6 PCYR-3 PCYR-3 1/2 PCYR-4 PCYR-4 1/2 PCYR-5 PCYR-6 PLR-1 PLR-1-1/8 PLR-1-1/4 PLR-1-3/8 PLR-1-1/2 PLR-1-3/4 PLR-1-3/4-5 PLR-2 PLR-2-3 PLR-2-1/4 PLR-2-1/2 PLR-2-1/2-10 PLR-2-1/2-16 PLR-2-3/4 PLR-3 PLR-3-1/4 PLR-3-1/2 PLR-4 PLR-4-1/2 PLR-5 PLR-6 PLR-7 PLR-8 PLR-10 PLR-10-1 PLRE-1 PLRE-1-1/8 PLRE-1-1/4 PLRE-1-3/8 PLRE-1-1/2 PLRE-1-3/4 PLRE-2 PLRE-2-3 PLRE-2-1/4 PLRE-2-1/2 PLRE-2-1/2-7 PLRE-2-3/4 PLRE-3 PLRE-3-1/4 PLRE-3-1/2 PLRE-4 PLRE-4-1/2 PLRE-5 PLRE-6 PLRH-1 PLRH-1-1/4 PLRH-1-1/2 PLRH-2 PLRH-2-1/2

McG McG McG McG McG McG McG McG McG McG McG McG McG McG Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb

PTRE-2.75 PTRE-3.00 PTRE-3.25 PTRE-3.50 PTRE-4.00 PTRE-4.50 PTRE-5.00 PTRE-6.00 PTRY-3.00 PTRY-3.50 PTRY-4.00 PTRY-4.50 PTRY-5.00 PTRY-6.00 PTR-1.00 PTR-1.125 PTR-1.25 PTR-1.375 PTR-1.50 PTR-1.75 PTR-1.75-5 PTR-2.00 PTR-2.00-2 PTR-2.25 PTR-2.50 PTR-2.50-1 PTR-2.50E PTR-2.75 PTR-3.00 PTR-3.25 PTR-3.50 PTR-4.00 PTR-4.50 PTR-5.00 PTR-6.00 PTR-7.00 PTR-8.00 PTR-10.00 PTR-10.00-8 PTRE-1.00 PTRE-1.125 PTRE-1.25 PTRE-1.375 PTRE-1.50 PTRE-1.75 PTRE-2.00 PTRE-2.00-2 PTRE-2.25 PTRE-2.50 PTRE-2.50E PTRE-2.75 PTRE-3.00 PTRE-3.25 PTRE-3.50 PTRE-4.00 PTRE-4.50 PTRE-5.00 PTRE-6.00 PTR-1.00-HT PTR-1.25-HT PTR-1.50-HT PTR-2.00-HT PTR-2.50-HT

PLRN-1 PLRN-1-1/4 PLRN-1-1/2 PLRN-2 PLRN-2-1/2 PLRNE-1 PLRNE-1-1/4 PLRNE-1-1/2 PLRNE-2 PLRNE-2-1/2 PLRY-1-1/2 PLRY-1-3/4 PLRY-2 PLRY-2-1/4 PLRY-2-1/2 PLRY-2-1/2-7 PLRY-3 PLRY-3-1/4 PLRY-3-1/2 PLRY-4 PLRY-5 PLRY-6 PLRY-7 PLRY-8 PLRY-9 PLRY-10 RBC 2 RBC 2 1/4 RBC 2 1/2 RBC 2 3/4 RBC 3 RBC 3 1/4 RBC 3 1/2 RBC 4 RBC 5 RBC 6 RBC 7 RBC 8 RBC 9 RBC 10 RBY 3 RBY 3 1/4 RBY 3 1/2 RBY 4 RBY 5 RBY 6 RBY 7 RBY 8 RBY 9 RBY 10 S64L S64LW S64LWX S72L S72LW S72LWX S80L S80LW S80LWX S88L S88LW S88LWX S96L

Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC

NPTR-1.00 NPTR-1.25 NPTR-1.50 NPTR-2.00 NPTR-2.50 NPTRE-1.00 NPTRE-1.25 NPTRE-1.50 NPTRE-2.00 NPTRE-2.50 PTRY-1.50 PTRY-1.75 PTRY-2.00 PTRY-2.25 PTRY-2.50E PTRY-2.50 PTRY-3.00 PTRY-3.25 PTRY-3.50 PTRY-4.00 PTRY-5.00 PTRY-6.00 PTRY-7.00 PTRY-8.00 PTRY-9.00 PTRY-10.00 PDC-2.00 PDC-2.25 PDC-2.50 PDC-2.75 PDC-3.00 PDC-3.25 PDC-3.50 PDC-4.00 PDC-5.00 PDC-6.00 PDC-7.00 PDC-8.00 PDC-9.00 PDC-10.00 PDCY-3.00 PDCY-3.25 PDCY-3.50 PDCY-4.00 PDCY-5.00 PDCY-6.00 PDCY-7.00 PDCY-8.00 PDCY-9.00 PDCY-10.00 SCF-2.00-S SCF-2.00-SH SCFE-2.00-SH SCF-2.25-S SCF-2.25-SH SCFE-2.25-SH SCF-2.50-S SCF-2.50-SH SCFE-2.50-SH SCF-2.75-S SCF-2.75-SH SCFE-2.75-SH SCF-3.00-S

Cross Reference Charts In Alphabetical Order by Reference Number

S96LW S96LWX S104L S104LW S104LWX S112L S112LW S112LWX S128L S128LW S128LWX S160LW S192LW S224LW SHA-437 SHA-500 SHA-625 SHA-750 SHA-1000 SHA-1125 SHA-1250 SHA-1750 SHA-2250 SHA-2750 SHB-3250 SHB-3750 SHB-4250 SHE-437 SHE-500 SHE-625 SHE-750 SHE-1000 SHE-1125 SHE-1250 SHE-1750 SHE-2250 SHE-2750 VCF-2-1/2 VCF-3-1/2 VCF-4-1/2 VCF-5-1/2 VCF-6-1/2 VCF-7-1/2 VCF-8-1/2 VCFE-2-1/2 VCFE-3-1/2 VCFE-4-1/2 VCFE-5-1/2 VCYR-4 1/2 VCYR-5 1/2 VCYR-6 1/2 VLR-1-1/2 VLR-2 VLR-2-1/2 VLR-3-1/2 VLR-3-1/2-16 VLR-4-1/2 VLR-5-1/2 VLR-6-1/2 VLR-7-1/2 VLR-8-1/2 VLRE-1-1/2 VLRE-2

RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb McG McG McG McG McG McG McG McG McG McG McG McG McG McG Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb

SCF-3.00-SH SCFE-3.00-SH SCF-3.25-S SCF-3.25-SH SCFE-3.25-SH SCF-3.50-S SCF-3.50-SH SCFE-3.50-SH SCF-4.00-S SCF-4.00-SH SCFE-4.00-SH SCF-5.00-SH SCF-6.00-SH SCF-7.00-SH YSH-.437 YSH-.500 YSH-.625 YSH-.750 YSH-1.000 YSH-1.125 YSH-1.250 YSH-1.750 YSH-2.250 YSH-2.750 YSH-3.250 YSH-3.750 YSH-4.250 YSHE-.437 YSHE-.500 YSHE-.625 YSHE-.750 YSHE-1.000 YSHE-1.125 YSHE-1.250 YSHE-1.750 YSHE-2.250 YSHE-2.750 VTR-2.50 VTR-3.50 VTR-4.50 VTR-5.50 VTR-6.50 VTR-7.50 VTR-8.50 VTRE-2.50 VTRE-3.50 VTRE-4.50 VTRE-5.50 VTRY-4.50 VTRY-5.50 VTRY-6.50 VTR-1.50 VTR-2.00 VTR-2.50 VTR-3.50 VTR-3.50E VTR-4.50 VTR-5.50 VTR-6.50 VTR-7.50 VTR-8.50 VTRE-1.50 VTRE-2.00

VLRE-2-1/2 VLRE-3-1/2 VLRE-3-1/2-4 VLRE-4-1/2 VLRE-5-1/2 VLRE-6-1/2 VLRE-7-1/2 VLRH-1-1/2 VLRH-2 VLRH-2-1/2 VLRY-2-1/2 VLRY-3 VLRY-3-1/2-7 VLRY-3-3/4 VLRY-4-1/2 VLRY-5 VLRY-5-1/2 VLRY-6-1/2 VLRY-7-1/2 VLRY-8-1/2 VLRY-9-1/2 VLRY-10-1/2 VLRY-11-1/2 Y64L Y72L Y80L Y88L Y96L Y104L Y112L Y128L Y160L Y192L Y224L YCRS-32 YCRS-36 YCRS-40 YCRS-44 YCRS-48 YCRS-52 YCRS-56 YCRS-64 YCRS-80 YCRS-96 YCRSC-32 YCRSC-36 YCRSC-40 YCRSC-44 YCRSC-48 YCRSC-52 YCRSC-56 YCRSC-64 YCRSC-80 YCRSC-96

Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb Osb RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC RBC Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo Kyo

VTRE-2.50 VTRE-3.50 VTRE-3.50E VTRE-4.50 VTRE-5.50 VTRE-6.50 VTRE-7.50 VTR-1.50-HT VTR-2.00-HT VTR-2.50-HT VTRY-2.50-9 VTRY-3.00 VTRY-3.50-9 VTRY-3.75 VTRY-4.50 VTRY-5.00 VTRY-5.50 VTRY-6.50 VTRY-7.50 VTRY-8.50 VTRY-9.50 VTRY-10.50 VTRY-11.50 YCF-2.00-S YCF-2.25-S YCF-2.50-S YCF-2.75-S YCF-3.00-S YCF-3.25-S YCF-3.50-S YCF-4.00-S YCF-5.00-S YCF-6.00-S YCF-7.00-S YCF-2.00-S YCF-2.25-S YCF-2.50-S YCF-2.75-S YCF-3.00-S YCF-3.25-S YCF-3.50-S YCF-4.00-S YCF-5.00-S YCF-6.00-S YCCF-2.00-S YCCF-2.25-S YCCF-2.50-S YCCF-2.75-S YCCF-3.00-S YCCF-3.25-S YCCF-3.50-S YCCF-4.00-S YCCF-5.00-S YCCF-6.00-S

Suggest Documents