LIN-LIN CHEN EDUCATION 1986~1992 Ph.D., Industrial and Operations Engineering, University of Michigan, Ann Arbor, Michigan, USA 1980~1984 B.S., Industrial Design, National Cheng Kung University, Tainan, Taiwan

RESEARCH AREAS Aesthetics

and

Engineering Concept

Perceptions

of

Interdisciplinary

Design,

User

Product

Design,

Collaboration,

Interface

Design,

Design

and

Computer-Aided and

Design

for

Manufacturability

ACADEMIC POSITIONS 2013~

Professor, Design and realization of intelligent systems, Faculty of Industrial Design, Eindhoven University of Technology, the Netherlands

1998~

Professor, Department of Industrial and Commercial Design, National Taiwan University of Science and Technology (NTUST), Taiwan

2012~

Adjunct Professor, Graduate Institute of Networking and Multimedia, National Taiwan University (NTU), Taiwan

2004~2010 Dean, College of Design, NTUST 2000~2004 Head, Dept. of Industrial and Commercial Design; Director, Graduate Institute of Design, NTUST 1997~1998 Associate Professor, Dept. of Industrial and Commercial Design, NTUST 1993~1997 Associate Professor, Graduate Institute of Engineering, NTUST 1992~1993 Assistant

Professor,

Manufacturing

Department

Systems

of

Industrial

and

Iowa

State

Engineering,

University, Ames, Iowa, USA

INDUSTRIAL EXPERIENCE 1997~1999 Programmer (Half-time), CAD/CAM Department, Ford Motor Company, Dearborn, Michigan, USA

Lin-Lin Chen

February 10, 2013

1984~1986 Product Designer, Home Appliance Division, Sampo Corporation, Taiwan EDITORIAL ACTIVITIES 2006~

Founding Editor-in-Chief, International Journal of Design (http://www.ijdesign.org/; SCI, SSCI, A&HCI) 2005~2008 Department Editor, Design and Manufacturing Focus Issues, IIE Transactions (SCI), Institute of Industrial Engineers, USA 2008~ Editor-in-Chief, Journal of Design (in Chinese, Taiwan Humanities Citation Index Core), Chinese Institute of Design, Taiwan ACADEMIC SOCIETIES 2011~2014 Vice President, International Association of Societies of Design Research (IASDR) – formed by Chinese Institute of Design (CID, Taiwan), Design Research Society (DRS), Japanese Society for the Science of Design (JSSD), Korean Society of Design-Science (KSDS), and the Design Society. 2005 ~ Executive Board Member, IASDR 2007~2008 President, Chinese Institute of Design (CID), Taiwan 2009~ Honorary Executive Director, CID 2003 ~2008 Executive Director, CID GOVERNMENT AGENCIES 2012~2013 Advisory Committee Member, Department of Humanities and Social Sciences, National Science Council, Taiwan 2009~2011 Convener, Committee of Arts (incl. Design), Department of Humanities and Social Sciences, National Science Council, Taiwan 2006~2009 Advisor, Advisory Office, Ministry of Education, Taiwan ACADEMIC AND PROFESSIONAL SERVICES 2007~2011 Advisory Board, Faculty of Industrial Design, Eindhoven University of Technology, the Netherlands 2012 International Review Committee, International Design Institute (IDI), Zhejiang University, China 2012~2013 Consultant, Taiwan Design Center, Taiwan 2005, 2008 Panel of International Judges, National Design Award, Ministry of Economic Affairs, Taiwan 2004 Consultant, Acer Inc., Taiwan 1998~2010 Faculty Senate, NTUST 2011~2013 Faculty Senate, NTUST 1998~2010 Faculty Promotion and Evaluation Committee, NTUST

Lin-Lin Chen

February 10, 2013

2011 2009 2005 2011~

1993 ~

Review Committee Chair, IASDR 2011, Delft University of Technology, Netherlands. Program Committee Co-Chair, IASDR 2009, Seoul, Korea Program Committee Chair, IASDR 2005, Yunlin, Taiwan Faculty Evaluator for Umeå University, Cambridge University, Swinburne University of Technology, and National University of Singapore Reviewer for IIE Transactions, ASME Transactions: Journal of Manufacturing Science and Engineering, Algorithmica, International Journal of Industrial Ergonomics, and Journal of Design

HONORS AND AWARDS 2006~ 2000

Fellow, Design Research Society Outstanding Reviewer, ASME Transactions: Journal of Manufacturing Science and Engineering 1992 Carver Faculty Fellowship, Iowa Center for Emerging Manufacturing Technologies, Iowa State University 1991 Distinguished Achievement Award, Department of Industrial and Operations Engineering, University of Michigan 1990 Ford Motor Company Manufacturing Fellowship 1984 Design Award, National Collegiate Design Competition, Taiwan 1982, 1983 Student Award, National Cheng Kung University, Taiwan Honorary Societies: Sigma Xi, Tau Beta Pi

PUBLICATIONS 1

Hung, W. K., & Chen, L. L. (2012). Effects of novelty and its dimensions on aesthetic preference in product design. International Journal of Design, 6(2), 8190. (SCI, SSCI, A&HCI)

2

Hung, W. K., & Chen, L. L. (2010). How to measure product’s contradictory semantics. Journal of Design, 15(4), 41-58. (in Chinese)

3

Chuang, Y., & Chen, L. L. (2008). How to rate 100 visual stimuli efficiently. International Journal of Design, 2(1), 31-43. (SCI, SSCI, A&HCI)

4

Chuang, Y., Chen, L. L., & Chuang, M. C. (2008). Computer-based rating method for evaluating multiple visual stimuli on multiple scales. Computers in Human Behavior, 24 (5), 1929-1946. (SSCI)

Lin-Lin Chen

February 10, 2013

5

Chen, K. M., Chen, L. L., & Shen, S. T. (2008). Development and comparison of a full-scale car display and communication system by applying Augmented Reality. Displays, 29(1), 33-40. (SCI)

6

Chuang, Y., & Chen, L. L. (2007). CAKE: an extensible kansei survey and analysis system. Journal of Design, 12(3), 63-80. (in Chinese)

7

Chen, K. M. & Chen, L. L. (2007). Perception of realism for real-time rendered virtual prototypes and physical models: using car styling as examples. Journal of Design, Vol. 12 (1), 37-52. (in Chinese)

8

Hsiao, K. A., & Chen, L. L. (2006). Fundamental dimensions of affective responses to product shapes. International Journal of Industrial Ergonomics, 36(6), 553-564. (SCI, SSCI)

9

Hsiao, K. A., & Chen, L. L. (2005). Application of morphing in multidimensional perception space – using kettles as examples. Journal of Design, 10(3), pp. 101-122 (in Chinese).

10 Lee, S. H., Chen, L. L., Lin, J. W., & Woo, T. C. (2003). Mass customization: 2D projection of high dimensional data. Systems, Man and Cybernetics, Part A: Systems and Humans, IEEE Transactions on, 33(1), 129-138. (SCI) 11 Ku, Y. J., Chen, L. L. & Sun, C. W. (2001). Impact of interactivity and multimedia richness of the landing page at a microsite on advertising effectiveness. Journal of Design, 6(2), 65-679. (in Chinese) 12 Wang, M. E., Chen, L. L., & Woo, T. C. (2000). Swept surface synthesis with visibility. Transactions of the ASME: Journal of manufacturing science and engineering, 122(3), 536-542. (SCI) 13 Tang, K., Chou, S. Y., Chen, L. L., & Woo, T. C. (2000). Tetrahedral mesh generation for solids based on alternating sum of volumes. Computers in Industry, 41(1), 65-81. (SCI) 14 Chen, C. S., Hung, Y. P., Hung, G. C., Chen, L. L. & Fuh, C.-S. (1999). Semiautomatic tool for aligning a parameterized CAD model to stereo image pair. IEICE Transactions on Information and Systems, 82(12), 1582-1588. (SCI) 15 Shaw, C.-K., Chen, L. L., Lee, A. and Lee, T.D. (1999). Distribution of HLA gene and haplotype frequencies in Taiwan: a comparative study among Minnan, Hakka, Aborigines and Mainland Chinese. Tissue Antigens, 53: 51– 64. (SCI)

Lin-Lin Chen

February 10, 2013

16 Lin, J. W. & Chen, L. L. (1999) Analysis and visualization of multidimensional perceptual space. Journal of Design, 3(1), 1- 22. (in Chinese) 17 Chen, C. R., Chen, L. L. & Lin, R. T. (1998). Effectiveness of computer visualization methods in communicating product appearance. Journal of Design, 2(2), 71- 88. (in Chinese) 18 Tang, K., Chen, L. L., & Chou, S. Y. (1998). Optimal workpiece setups for 4axis numerical control machining based on machinability. Computers in industry, 37(1), 27-41. (SCI) 19 Tang, K., Chou, S. Y., & Chen, L. L. (1998). An algorithm for reducing tool retractions in zigzag pocket machining. Computer-Aided Design, 30(2), 123-129. (SCI) 20 Tang, K., Wang, M. E., Chen, L. L., Chou, S. Y., Woo, T. C., & Janardane, R. (1997). Computing planar swept polygons under translation. Computer-Aided Design, 29(12), 825-836. (SCI) 21 Lin, J. W. & Chen, L. L. (1997). A user study of world-wide web browsers. Journal of Design, 2(1), 47- 64. (in Chinese) 22 Tu, C. H. & Chen, L. L. (1997). Development of a www-based tool for interactive generation of multidimensional scaling questionnaire. Journal of Design, 2(1), 1-15. (in Chinese) 23 Chen, C. S., Hung, Y. P. & Chen, L. L. (1997). Applying computer vision techniques for 3D object model reconstruction. Images and Recognition, 4(1), 30-37. (in Chinese) 24 Chen, S. F., Oliver, J. H., Chou, S. Y., & Chen, L. L. (1997). Parallel disassembly by onion peeling. Transactions of the ASME: Journal of mechanical design, 119(2), 267-274. 25 Lan, P. T., Chou, S. Y., Chen, L. L., & Gemmill, D. (1997). Determining fabrication orientations for rapid prototyping with stereolithography apparatus. Computer-Aided Design, 29(1), 53-62. (SCI) 26 Wang, M. E., Woo, T. C., Chen, L. L., & Chou, S. Y. (1996). Computing spanning line segments in three dimensions. The Visual Computer, 12(4), 173180. (SCI) 27 Chen, L. L., Woo, T. C. & Pollock, S. M. (1996). Yield optimization by simulated annealing. Engineering Design and Automation, 2(1), 61-72.

Lin-Lin Chen

February 10, 2013

28 Chen, L. L., Chou, S. Y., & Woo, T. C. (1995). Partial visibility for selecting a parting direction in mold and die design. Journal of Manufacturing Systems, 14(5), 319-330. (SCI) 29 Chou, S. Y., Woo, T. C., Chen, L. L., Tang, K., & Shin, S. Y. (1994). Scallop hull and its offset. Computer-Aided Design, 26(7), 537-542. (SCI) 30 Chen, L. L., Chou, S. Y., & Woo, T. C. (1993). Separating and intersecting spherical polygons: computing machinability on three-, four-, and five-axis numerically controlled machines. ACM Transactions on Graphics (TOG), 12(4), 305-326. (SCI) 31 Chen, L. L., Chou, S. Y., & Woo, T. C. (1993). Parting directions for mould and die design. Computer-Aided Design, 25(12), 762-768. (SCI) 32 Chen, L. L., & Woo, T. C. (1992). Computational geometry on the sphere with application to automated machining. Transactions of the ASME: Journal of Mechanical Design, 114(2), 288-295. (SCI)

EDITORIALS 1

Chen, L. L. (2007). International Journal of Design: A step forward. International Journal of Design, 1(1), 1-2.

2

(Times Cited: 4 from WOS)

Chen, L. L. (2011). International Journal of Design: Reaching the first milestone. International Journal of Design, 5(1), 1-2.

KEYNOTES 1

Chen, L. L. (2013, December). New Boundaries, New Adventures. Speech presented at DesignEd Asia Conference. Hong Kong: Hong Kong Polytechnic University.

2

Chen, L. L. (2012, May). Positioning design in academia. Speech presented at Korean Society of Design Science Spring Conference. Seoul, Korea: Yonsei University.

3

Chen, L. L. (2011, Nov.) Positioning design in academia. Speech presented at 2011 International Association of Societies of Design Research (IASDR) Conference. Delft, Netherlands: Delft University of Technology.

4

Chen, L. L. (2011, Nov.). Design + Technology for radical innovation. Speech presented at 2011 International Conference on Interaction Design (ICID). Hong Kong: Hong Kong Polytechnic University.

5

Chen, L. L. (2010, Oct.). Challenges for Asia designers. Speech presented at Mini-symposium: Design Challenges. Eindhoven, Netherlands: Eindhoven University of Technology.

Lin-Lin Chen

February 10, 2013

CONFERENCE PRESENTATIONS 1

Hung, W.-K. & Chen, L. L. (2013, Aug.) Creating aesthetic experience by blending styles. In Proceedings of 2013 International Association of Societies of Design Research (IASDR) Conference. Tokyo, Japan.

2

Hung, W.-K. & Chen, L. L. (2012, July) Measuring contradictory semantics in product appearance. In Proceedings of the 4th Applied Human Factors and Ergonomics (AHFE) International Conference 2012. San Francisco, CA, USA.

3

Hung, W.-K. & Chen, L. L. (2011, Nov.) Aesthetics and contradiction in product semantics. In Proceedings of 2011 International Association of Societies of Design Research (IASDR) Conference. Delft, Netherlands: Delft University of Technology.

4

Chen, L. L., Hung, W. K., Cheng, C. T., Yuen, C. W., & Liang, R. H. (2011, Nov.). Ideastorming: Design+ Technology for collaborative innovation. In Proceedings of 2011 International Design Alliance (IDA) Congress Education Conference (pp. 13-21). Taipei: Taiwan Design Center.

5

Chuang, Y., Chuang, P. H., Shi, H. S., Hsiao, K. A., & Chen, L. L. (2009, Oct.) Computer morphing as an effective approach to develop successful products half a step ahead of the market. In Proceedings of The 5th International Workshop on Design & Semantics of Form & Movement (DeSForM). Taipei, Taiwan: National Taiwan University of Science and Technology.

6

Hung, W. K., & Chen, L. L. (2009, Oct.). Exploring contradictory meanings in product semantics. In Proceedings of The 5th International Workshop on Design & Semantics of Form & Movement (DeSForM). Taipei, Taiwan: National Taiwan University of Science and Technology.

7

Hung, W. K., & Chen, L. L. (2009, Oct.). Exploring relationships between product aesthetics, typicality and preference. In Proceedings of 2009 International Association of Societies of Design Research (IASDR) Conference. Seoul, Korea.

8

Chen, L. L., Kang, H.-C. & Hung, W.-K. (2007, Nov.) Effects of design features on automobile styling perceptions. In Proceedings of 2007 International Association of Societies of Design Research (IASDR) Conference. Hong Kong: Hong Kong Polytechnic University.

9

Chuang, Y. & Chen, L. L. (2006, Nov.) Integrated approach to develop an extensible Kansei engineering information system. In Proceedings of WonderGround-2006 Design Research Society International Conference. Lisbon, Portugal.

10 Hsiao, K. A., Chen, L. L. & Lin, C. Y. (2005, Nov.) How designers use interpolation to manipulate affective responses of product shapes. In

Lin-Lin Chen

February 10, 2013

Proceedings of IASDR 2005: International Design Congress. Yunlin, Taiwan: National Yunlin University of Technology. 11 Chen, L. L., Yeh, C.-C., Wong, B., & Hsiao, K. A. (2004, Nov.) Using morphing as a tool for generating affective product shapes. In Proceedings of Futureground: 2004 Design Research Society International Conference. Melbourne, Australia: Monash University. 12 Chuang, Y. & Chen, L. L. (2003, Oct.) Computer-aided Kansei engineering with XML technology. In Proceedings of 6th Asian Design Conference. Tsukuba, Japan: University of Tsukuba. 13 Hsiao, K. A., Chen, L. L., Wang, C.-F. & Tsang, H.-T. (2003, Oct.) Fundamental dimensions of affective responses to product shapes. In Proceedings of 6th Asian Design Conference. Tsukuba, Japan: University of Tsukuba. 14 Chen, L. L., Wang, G. F., Hsiao, K. A., & Liang, J. (2003, June). Affective product shapes through image morphing. In Proceedings of the 2003 International Conference on Designing Pleasurable Products and Interfaces (DPPI). ACM. 15 Hsu, S. H., Chen, L. L. & Chu, Y. C. (2001, Aug.) Designing multiuser voice control interface for home entertainment system. In Proceedings of HCI International 2001. New Orleans, LA, USA. 16 Chen, L. L., & Liang, J. (2001, June). Image interpolation for synthesizing affective product shapes. In Proceedings of the International Conference on Affective Human Factors Design (CAHD). Singapore. 17 Hsu, S. H., Chen, L. L. & Chu, Y. C. (2000) Usability study of a multiuser speech interface for home entertainment systems. In Proceedings of the Philips UI 2000 Conference. Eindhoven, The Netherlands. 18 Chou, S. Y., Chen, L. L., & Woo, T. C. (1999, Nov.) The loci of the foci of systems of conics. In Proceedings of the Sixth SIAM Conference on Geometric Design (GD99). Albuquerque, New Mexico, USA. 19 Chen, L. L., Yang, S. H., and Lin, J. W. (1999, Aug.) Synthesizing ideal product shapes by image morphing. In Proceedings of HCI International 99. Munich, Germany. 20 Chen, L. L., & Lin, J. W. (1999, Aug.) Development of an interface for computing and analyzing multidimensional perceptual space. In Proceedings of HCI International 99. Munich, Germany. 21 Chen, C. S., Hung, Y. P., Hung, G. C., Chen, L. L., & Fuh, C. S. (1998). Semiautomatic construction of parameterized CAD models and its application to augmented reality. In Proceedings of International Symposium on Image, Speech, Signal Processing, and Robotics. Hong Kong. (invited paper)

Lin-Lin Chen

February 10, 2013

22 Liou, S. R., Chou, S. Y., Chen, L. L., & Chyn, T. R. (1998) The application of cluster analysis to the study of facade composition. In Proceedings of Mathematics and Design 98 Conference. San Sabastian, Spain. 23 Lan, P. T., Chou, S. Y., Chen, L. L., & Gemmill, D. (1994). Determining fabrication orientations for rapid prototyping with sterolithography. In Proceedings of the AUTOMATION’94, Vol. 1, 129-133. 24 Chen, L. L. & Chou, S. Y. (1994) Theta-visibility and its application to numerical controlled machining. In Proceedings of the AUTOMATION`94, Vol. 2, 195-202. 25 Chen, S. F., Oliver, J. H., Chou, S. Y., & Chen, L. L. (1994, Sept.). Parallel disassembly by onion peeling. In Proceedings of ASME Design Automation Conference. Minneapolis, USA. 26 Wang, M. E., Chen, L. L. & Chou, S. Y. (1993, Nov.) On determining mold parting surfaces for tube-shaped objects,” Third SIAM Conference on Geometric Design. Tempe, Arizona, USA. 27 Chen, L. L., Chou, S. Y., & Wang, M. E. (1993). “Optimal workpiece orientation on numerically controlled machines with general cutter geometries,” In Proceedings of the 1993 IE Research Conference. Los Angeles, California, USA. 28 Chen, L. L., & Chou, S. Y. (1992). Optimal parting directions by partial visibility. In Proceedings of the Symposium on Concurrent Engineering, 1992 ASME Winter Annual Meeting. Anaheim, California, USA.

PATENTS 1

Yen, C. C., Leu, M. Y., Tsai, W. C., Chen, L. L., Lin, J. W., Huang, W. L., & Hsu, S. H. (2006). System for controlling an apparatus with speech commands. European Patent No. EP 1307875. Munich, Germany: European Patent Office.

2

Chen, K. M., Chen, L. L., Wang, M. J., Tsai, W. F., Yang, C. Y., & Shi, W. L. (2006). Augmented reality system and method with mobile and interactive function for multiple users. U.S. Patent No. 20,060,284,791. Washington, DC: U.S. Patent and Trademark Office.

3

Yen, C. C., Leu, M. Y., Tsai, W. C., Chen, L. L., Lin, J. W., Huang, W. L., & Hsu, S. S. (2002). System for controlling an apparatus with speech commands. U.S. Patent No. 20,020,072,912. Washington, DC: U.S. Patent and Trademark Office.

4

Wang, C. J., Lee, J., Lan, L. M., Chen, L. L., Wang, T. Y., Kung, C. P., ... & Huang, D. Y. (1998). Electronic Apparatus with a Foldable Display. U.S. Patent No. 5,734,513. Washington, DC: U.S. Patent and Trademark Office.

RESEARCH PROJECTS Design-Engineering Interdisciplinary Innovation

Lin-Lin Chen

February 10, 2013

National Science Council, Taiwan 2006~

ideastorming - Concept Design of Future Products with Advanced

Engineering

Technologies

(http://www.ideastorming.tw)

2011

2012

Principal Coordinator, 25 Design Projects

2010

Principal Coordinator, 31 Design Projects

2009

Principal Coordinator, 30 Design Projects

2008

Principal Coordinator, 24 Design Projects

2007

Principal Coordinator, 15 Design Projects

2006

Principal Coordinator, 11 Design Projects

ideastorming 2006~2011 Exhibition at 2011 International Design Alliance Conference, Taipei, Taiwan

2008~2012 Center of Innovation and Synergy for Intelligent Home Technology (Co-PI; http://insight.ntu.edu.tw/en/) 2006~2008 Research and Deployment of Smart Campus Living Space (Co-PI) Sub-Project 7: Scenario Simulation and Concept Product Design Design Innovativeness National Science Council, Taiwan 2011~2014 Visual Rhetorics in Product Appearance and Effects on Emotional Response 2008~2011 Product Styling Strategy for Design Innovation and Branding 2006~2008 Preference Analysis of Prototypical Shapes and Innovative Shapes Computer-Aided Concept Exploration and Evaluation National Science Council, Taiwan 2005~2007 Characteristic Lines and Image Morphing for Product Perception Research 2003~2005 Development of a Web-Based Kansei Engineering System 2002~2004 Affective Studies on Product Shapes 2000

Internet-Based Consumer Perception and Preference Study using Virtual Products

1999~2000 Image

Interpolation

Methods

for

Visualizing

Multidimensional Perceptual Space 1997~1999 Analysis

and

Visualization

of

Multidimensional

Perceptual Space

Lin-Lin Chen

February 10, 2013

1996

A Web-Based System for Computing and Visualizing Multidimensional Perceptual Space

1995

Computational Geometry in Perceptual Space for Product Positioning

Ministry of Education, Taiwan 2004

Developing

Core

Technologies

for

Digital

Content

Industry Sub-Project2: Creation of Digital Content in Virtual Reality Environment and Human Perception Research Perception of Colors National Science Council, Taiwan 2002

Analyzing

and

Visualizing

Perception

of

Color

Combinations in Product Design (PI) 2001

Analyzing and Visualizing Perception of Individual Color and Color Combinations (PI)

Taiwan Textile Federation, Taiwan 2000

Perception and Trend Analysis of Fashion Colors (PI)

1998~1999 Establishing Color Perceptual Maps for Taiwanese People (PI) Concept Product/Interface Design National Science Council, Taiwan 2006~2008 Research and Deployment of Smart Campus Living Space (Co-PI) Sub-Project 7: Scenario Simulation and Concept Product Design Philips Electronics and Philips Research Lab, Taiwan 2001

Error Perception and Innovative Product Concept Design of Human Machine Interfaces for Consumer Electronics (PI)

1999~2000 Design and Usability Study of Asian Specific Multimodal User Interfaces (PI) 1999

Design and Evaluation of Speech Interfaces in Consumer Electronics (PI)

Philips Research Lab, UK 1998

Usability Testing of Reduced Text Human Machine Interface for Mobile Phones

Computer and Communication Lab, Industrial Technology Research Institute, Taiwan 1997~1998 A Study of User Model Design for Web Media (PI)

Lin-Lin Chen

February 10, 2013

1996~1997 A Study of User Interface Models for Information Appliances with Small Display/Low Resolution (PI) 1995~1996 WWW Information Browsing Interface for Small Displays (PI) 1994~1995 A Study on the Use Model of Personal Digital Assistants (PI) 1994 Product Design of Personal Digital Assistant (PI) Design of Large-Scale Websites Civil Aeronautics Administration, Ministry of Transportation, Taiwan 1997~1998 Website Design of CKS International Airport EVA International, Taiwan 1996

Website Planning and Design for EVA Airline

Design for Manufacturability National Science Council, Taiwan 1994~1995 Design for Manufacture – Manufacturability Analysis of Injection Molded Objects (PI) Office of Naval Research, USA 1992~1993 A Virtual Environment for Manufacturing Systems (Co-PI) SME Manufacturing Engineering Education Foundation, USA 1992

Lin-Lin Chen

Optimal Parting Directions and Parting Lines for Injection Mold Design (PI)

February 10, 2013