Lighting catalogue 2016
LIGHTING SOLUTIONS
SUPPORT
FOR DESIGN AND INSTALLATION
Professionals specialized in the lighting engineering sector can propose solutions suitable for different installations, following customers step by step during the realization of a project, developed as a product and service, till the installation of the plant. Palazzoli, thanks to a thirty-year experience in lighting engineering and thanks to the partners of the group, offers a range of lighting fixtures suitable for different needs and installations, even the harshest such as tunnels, ships, submarines and ATEX areas.
SUPPORT
FOR TRAINING AND QUALIFICATION
The company organizes training and technical updating activities, that have installers, designers and architects as main delegates. This is an opportunity that shows the intention to open up and grow also through personal meetings. The company organizes about one hundred technical meetings every year in all Europe, transmitting the know-how about the Standards in force and, consequently, evolutions and adaptations of the Palazzoli products. The warranty of the company performances is ISO 9001:2000 certified and all the products are tested by qualified technicians to guarantee the safety. Palazzoli products have got several different marks, such as Atex, IECex, Enec, Cesi, Rina.
2
SUPPORT
FOR TECHNICAL INFORMATION
Palazzoli prides itself in understanding the needs of the customer and due to its manufacturing flexibility can tailor products to meet the customer needs. All photometric data and technical data information for the lighting fixtures in this brochure can be found on the Palazzoli web site www. palazzoli.com.
3
CESI
RINA
ATEX
IECex
CERTIFIED QUALITY
Palazzoli is certified for the conformity to ISO 9001 Standards. All the lighting fixtures are made in Italy and certified with several marks, such as ENEC, CESI, RINA, ATEX, IECex and QL (led certificated against photobiological risk).
LED lights fixtures reduce the energy amount required to reach the same level of illumination of traditional incandescent and discharge lamps. Reducing energy use, reducing greenhouse gas emissions.
4
QL
TESTED
LUX
QUALITY
Lighting fixtures are assembled and wired in a dedicated strictly controlled area within the Palazzoli factory. The sensitivity of the LED technology requires the absence of electrostatic discharges, and access to the area is strictly controlled.
Dimensions at page 44
5
INDUSTRY
LED lighting fixtures
Fluorescent lighting fixtures
page 9
page 13
Oval bulkhead fixtures
Round bulkhead fixtures
Well glass fixtures
page 19
page 20
page 22
Zone 1, 2, 21 and 22
Zone 2, 21 and 22
Zone 2, 21 and 22
page 28
page 30
page 32
ATEX
6
CODES INDEX
LUX
TUNNEL LED tunnel lighting fixture permanent
LED tunnel lighting fixture reinforcing
Fluorescent lighting fixtures
page 35
page 35
page 37
LED lighting fixtures
Fluorescent lighting fixtures
page 39
page 41
Oval bulkhead fixtures
Well glass fixtures
Suspended fixtures
page 43
page 43
page 44
MARINE
ARCHITECTURAL
7
RINO-LED series LED lighting fixtures
RESISTANT Thanks to the stainless steel AISI 304.
8
ENERGY SAVING Thanks to our LED that reduce energy consumption.
50.000 HOURS OF LIGHT Thanks to the new LED technology.
LUX
INDUSTRY
RINO LED is the new watertight lighting fixture series made of steel and glass including LED technology to illuminate internal or external areas. The new light distribution system ensures more than 35% energy saving if compared with the same luminous flux of a T8 fluorescent lamp. Visual comfort is guaranteed by the anti-glare diffuser. We recommend to install these fixtures in those areas where it is important to combine steel body resistance together with energy saving.
Conformity to standards
Directive 2006/95/EC EN 60598-1:2008+A11:2009 EN 60598-2-1:1989 EN 62471:2008 Directive 2004/108/EC EN 62493:2010 Directive 2011/65/EC
Body material
Stainless steel AISI 304 Painted zinced steel
Diffuser material
Satin finish glass
Protection rating (IP as per IEC/EN 60529)
IP66
Painting
Colour Resistance to impacts (IK rating as per IEC/EN 62262) Colour temperature CRI Insulation class Rated voltage
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
Power (W)
230V
technopolymer
Length (mm)
Luminous flux (lm)
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
690
3170
electronic
1
822142
1
51
1300
5900
electronic
1
822242
1
65
1600
8000
electronic
1
822342
1
28
690
3170
emergency
1
822140
1
51
1300
5900
emergency
1
822240
1
65
1600
8000
emergency
1
822340
1
Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
LED lighting fixtures in stainless steel-glass with narrow beam 230V IP66
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
IK09
I
on one side
28
RAL9003 (painted zinced steel version)
≥ 80
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
Non-toxic polyester resistant to weather conditions and UV rays
4000K
LED lighting fixtures in stainless steel-satin finish glass with wide beam 230V IP66
Power (W)
on one side
technopolymer
Length (mm)
Luminous flux (lm)
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
51
1300
5900
electronic
2
820242
1
65
1600
8000
electronic
2
820342
1
51
1300
5900
emergency
2
820240
1
65
1600
8000
emergency
2
820340
1
Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
Frequency
50-60Hz
Max cable section
2,5 mm2
Entry cable diameter
7-14 mm
Emergency battery lifetime
1h (3h on demand)
Emergency battery recharging time
24h
Device lifetime Storage temperature Operating temperature
Dimensions at page 48
L80 B20 @50.000h Ta=25°C -40°C - +70°C -25°C - +40°C (Special solutions available on request for extremely cold temperature storage)
Photometric curves at page 46
9
RINO-LED series LED lighting fixtures
LED lighting fixtures in stainless steel-polycarbonate with wide beam 230V IP66
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
Power (W)
inox inox verniciato verniciato polic. opalino polic. opalino
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
on one side
soffitto soffitto
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
technopolymer
Length (mm)
Luminous flux (lm)
con riflettore con riflettore bianco bianco
LED lighting fixtures in painted steel-satin finish glass with wide beam 230V IP66
technopolymer
on one side
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
Power (W)
Length (mm)
Luminous flux (lm)
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
28
690
3170
electronic
1
828142
1
28
690
3170
electronic
2
842142
1
51
1300
5900
electronic
1
828242
1
51
1300
5900
electronic
2
842242
1 1
28
690
3170
emergency
1
828140
1
65
1600
8000
electronic
2
842342
51
1300
5900
emergency
1
828240
1
28
690
3170
emergency
2
842140
1
51
1300
5900
emergency
2
842240
1
65
1600
8000
emergency
2
842340
1
Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
LED lighting fixtures in stainless steel-polycarbonate with narrow beam 230V IP66
Power (W)
Length (mm)
polic. opalino polic. opalino
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
on one side
soffitto soffitto
inox inox verniciato verniciato
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
technopolymer
Luminous flux (lm)
Power supply
con riflettore con riflettore bianco bianco
LED lighting fixtures in painted steel-glass with narrow beam 230V IP66
on one side
Photometric curves
Palazzoli code
Pack Q.ty
Power (W)
Length (mm)
technopolymer
Luminous flux (lm)
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
51
1300
5900
electronic
1
825242
1
51
1300
5900
electronic
2
843242
1
51
1300
5900
emergency
1
825240
1
65
1600
8000
electronic
2
843342
1
Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
51
1300
5900
emergency
2
843240
1
65
1600
8000
emergency
2
843340
1
Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
10
Photometric curves at page 46
Dimensions at page 48
INDUSTRY
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
con riflettore con riflettore bianco bianco
LUX
Pair of hooks for pendant mounting of steel lighting fixtures
LED lighting fixtures in painted steel-polycarbonate with wide beam 230V IP66
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
on one side
Power (W)
Length (mm)
technopolymer
Luminous flux (lm)
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
Manufacture material
Palazzoli code
Pack Q.ty
stainless steel AISI 304
820001
1
28
690
3170
electronic
1
847142
1
51
1300
5900
electronic
1
847242
1
28
690
3170
emergency
1
847140
1
51
1300
5900
emergency
1
847240
1
Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
Pair of swivelling supports for ceiling or wall mounting of steel lighting fixtures
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
con riflettore con riflettore bianco bianco
LED lighting fixtures in painted steel-polycarbonate with narrow beam 230V IP66
Manufacture material
Rotating angle
Palazzoli code
Pack Q.ty
stainless steel AISI 304
± 75°
820000
1
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
on one side
Power (W)
Length (mm)
technopolymer
Luminous flux (lm)
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
51
1300
5900
electronic
2
845242
1
51
1300
5900
emergency
2
845240
1
Pair of collars for mounting on tube of steel lighting fixtures
Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
Dimensions at page 48
Photometric curves at page 46
Manufacture material
Tube diameter ø (mm)
Palazzoli code
Pack Q.ty
stainless steel AISI 304
60
820006
1
11
RINO series Fluorescent lighting fixtures
WEATHERTIGHT The special reinforced gasket guarantees the IP66 protection rating in all the range.
12
EFFICIENT The ultra-bright aluminium reflector ensures optimum efficacy of the luminous flux and therefore an extremely uniform distribution.
RESISTANT The non-deformable structure makes RINO suitable to be installed even when vibrations are present.
LUX
INDUSTRY
Suitable for food industries, extractor hoods, chemical industries, mines and environments with oil presence. The range of RINO lighting fixtures is manufactured with the highest quality standards guaranteeing reliability and best performances, such as the body which is cold-drawn in a single piece and with a high photometric output.
Correspondence lighting fixture length and tube type Lighting fixture (mm)
T8 tubes
T5 tubes
550
18W
24W HO
1150
36W
1450
58W
28W HE 54W HO 35W HE 49W HO 80W HO
Conformity to standards
IEC/EN 60598-1 IEC/EN 60598-2-1
Body material
Stainless steel AISI 304 Painted zinced steel
Diffuser material
Temperate glass Polycarbonate
Protection rating (IP as per IEC/EN 60529) Painting
Colour Resistance to impacts (IK rating as per IEC/EN 62262) Insulation class Fuse type Lampholder Rated voltage
IP66 Non-toxic polyester resistant to weather conditions and UV rays RAL9003 (painted zinced steel version) IK09
I Cylindrical 5x20 G13 T8 / G5 T5
0-50-60Hz (electronic) 50Hz (electromagnetic)
Max cable section
2,5 mm2
Entry cable diameter
7-14 mm
Emergency battery recharging time
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
on one side
technopolymer
Wattage (W)
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
1x18
electronic
8
822131
1
1x36
electronic
8
822231
1
1x58
electronic
8
822331
1
2x18
electronic
9
822132
1
2x36
electronic
9
822232
1
2x58
electronic
9
822332
1
1+1x36
emergency
9
822211
1
1+1x58
emergency
9
822311
1
Characteristics: fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
Stainless steel-glass lighting fixtures with white reflector, for T5 tubes 230V IP66
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
1h
on one side
24h
Storage temperature
-40°C - +70°C
Operating temperature
-25°C - +50°C (Special solutions available on request for extremely cold temperature storage)
Dimensions at page 48
inox inox verniciato verniciato polic. opalino polic. opalino
230V
Rated frequency
Emergency battery lifetime
Stainless steel-glass lighting fixtures with white reflector, for T8 tubes 230V IP66
soffitto soffitto
Photometric curves at page 47
Wattage (W)
technopolymer
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
2x54
electronic
13
822962
1
2x49
electronic
13
822762
1
2x80
electronic
13
822862
1
Characteristics: fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
13
RINO series Fluorescent lighting fixtures
Stainless steel-glass lighting fixtures with symmetrical reflector in aluminium, for T8 tubes 230V IP66
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
con riflettore con riflettore bianco bianco
inox inox verniciato verniciato polic. opalino polic. opalino
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
on one side
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
brass
Wattage (W)
Stainless steel-glass lighting fixtures with asymmetrical reflector in aluminium, for T8 tubes 230V IP66
soffitto soffitto
on one side
Power supply
technopolymer
Photometric curves
Palazzoli code
Pack Q.ty
Wattage (W)
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
1x18
electronic
10
820131
1
1x18
electronic
12
824131
1
1x36
electronic
10
820231
1
1x36
electronic
12
824231
1
1x58
electronic
10
820331
1
1x58
electronic
12
824331
1
2x18
electronic
11
820132
1
2x36
electronic
11
820232
1
2x58
electronic
11
820332
1
3x18
electronic
11
820133
1
3x36
electronic
11
820233
1
1x18
dimmable electronic
10
820151
1
1x36
dimmable electronic
10
820251
1
2x18
dimmable electronic
11
820152
1
2x36
dimmable electronic
11
820252
1
1+1x18
emergency
11
820111
1
1+1x36
emergency
11
820211
1
1+1x58
emergency
11
820311
1
Characteristics: fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
Equipment included: pair of hooks for pendant mounting Characteristics: fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
Stainless steel-glass lighting fixtures with symmetrical reflector in aluminium, for T5 tubes 230V IP66
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
con riflettore con riflettore bianco bianco
inox inox verniciato verniciato polic. opalino polic. opalino
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
on one side
Stainless steel-glass lighting fixtures with asymmetrical reflector in aluminium, for T5 tubes 230V IP66
soffitto soffitto
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
brass
on one side
technopolymer
Wattage (W)
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
Wattage (W)
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
2x24
electronic
14
820562
1
1x24
electronic
15
824561
1
2x28
electronic
14
820462
1
1x54
electronic
15
824961
1
2x54
electronic
14
820962
1
1x49
electronic
15
824761
1
2x35
electronic
14
820662
1
1x80
electronic
15
824861
1
2x49
electronic
14
820762
1
2x80
electronic
14
820862
1
1+1x24
emergency
14
820511
1
1+1x54
emergency
14
820911
1
1+1x49
emergency
14
820711
1
Characteristics: fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
Equipment included: pair of hooks for pendant mounting Characteristics: fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
14
Photometric curves at page 47
Dimensions at page 48
LUX
INDUSTRY
Stainless steel-polycarbonate lighting fixtures with white reflector, for T8 tubes 230V IP66
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
on one side
Stainless steel-polycarbonate lighting fixtures with symmetrical reflector in aluminium, for T5 tubes 230V IP66
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
technopolymer
on one side
technopolymer
Wattage (W)
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
Wattage (W)
2x18
electronic
9
828132
1
2x24
2x36
electronic
9
828232
1
2x54
2x58
electronic
9
828332
1
2x49
electronic
Characteristics: fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
Photometric curves
Palazzoli code
Pack Q.ty
electronic
14
825562
1
electronic
14
825962
1
14
825762
1
Characteristics: fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
Stainless steel-polycarbonate lighting fixtures with symmetrical reflector in aluminium, for T8 tubes 230V IP66
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
Power supply
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
on one side
Wattage (W)
technopolymer
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
2x18
electronic
11
825132
1
2x36
electronic
11
825232
1
2x58
electronic
11
825332
1
1+1x18
emergency
11
825111
1
1+1x36
emergency
11
825211
1
1+1x58
emergency
11
825311
1
Characteristics: fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
Dimensions at page 48
Photometric curves at page 47
15
RINO series Fluorescent lighting fixtures
Painted steel-glass lighting fixtures with white reflector for T8 tubes 230V IP66
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
con riflettore con riflettore bianco bianco
inox inox verniciato verniciato polic. opalino polic. opalino
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
on one side
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
technopolymer
Wattage (W)
Painted steel-glass lighting fixtures with symmetrical reflector in aluminium, for T8 tubes 230V IP66
soffitto soffitto
on one side
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
Wattage (W)
technopolymer
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
2x18
electronic
9
842132
1
2x18
electronic
11
843132
1
2x36
electronic
9
842232
1
2x36
electronic
11
843232
1
2x58
electronic
9
842332
1
2x58
electronic
11
843332
1
1+1x18
emergency
11
843111
1
Characteristics: fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
1+1x36
emergency
11
843211
1
1+1x58
emergency
11
843311
1
Characteristics: fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
Painted steel-glass lighting fixtures with white reflector for T5 tubes 230V IP66
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
con riflettore con riflettore bianco bianco
inox inox verniciato verniciato polic. opalino polic. opalino
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
on one side
Wattage (W)
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
technopolymer
Power supply
Painted steel-glass lighting fixtures with symmetrical reflector in aluminium, for T5 tubes 230V IP66
soffitto soffitto
on one side
Photometric curves
Palazzoli code
Pack Q.ty
Wattage (W)
technopolymer
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
2x54
electronic
13
842962
1
2x24
electronic
14
843562
1
2x49
electronic
13
842762
1
2x28
electronic
14
843462
1
2x80
electronic
13
842862
1
2x54
electronic
14
843962
1
2x35
electronic
14
843662
1
2x49
electronic
14
843762
1
2x80
electronic
14
843862
1
1+1x24
emergency
14
843511
1
Characteristics: fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
1+1x54
emergency
14
843911
1
1+1x49
emergency
14
843711
1
Characteristics: fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
16
Photometric curves at page 47
Dimensions at page 48
INDUSTRY
Painted steel-polycarbonate lighting fixtures with white reflector for T8 tubes 230V IP66
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
con riflettore con riflettore bianco bianco
LUX
Pair of hooks for pendant mounting of steel lighting fixtures
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
on one side
technopolymer
Wattage (W)
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
Manufacture material
Palazzoli code
Pack Q.ty
stainless steel AISI 304
820001
1
2x18
electronic
9
847132
1
2x36
electronic
9
847232
1
2x58
electronic
9
847332
1
1+1x36
emergency
9
847211
1
Characteristics: fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
Painted steel-polycarbonate lighting fixtures with symmetrical reflector in aluminium, for T8 tubes 230V IP66
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
Pair of swivelling supports for ceiling or wall mounting of steel lighting fixtures
con riflettore con riflettore bianco bianco
Manufacture material
Rotating angle
Palazzoli code
Pack Q.ty
stainless steel AISI 304
± 75°
820000
1
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
on one side
technopolymer
Wattage (W)
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
2x18
electronic
11
845132
1
2x36
electronic
11
845232
1
2x58
electronic
11
845332
1 1
1+1x18
emergency
11
845111
1+1x36
emergency
11
845211
1
1+1x58
emergency
11
845311
1
Characteristics: fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
Manufacture material
Tube diameter ø (mm)
Palazzoli code
Pack Q.ty
stainless steel AISI 304
60
820006
1
Symmetrical reflectors for steel lighting fixtures
Painted steel-polycarbonate lighting fixtures with symmetrical reflector in aluminium, for T5 tubes 230V IP66
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
Pair of collars for mounting on tube of steel lighting fixtures
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
on one side
Wattage (W)
technopolymer
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
Manufacture material
For lighting fixtures (W)
Palazzoli code
Pack Q.ty
2x24
electronic
14
845562
1
aluminium
18, 24
820002
1
2x54
electronic
14
845962
1
aluminium
28, 36, 54
820003
1
2x49
electronic
14
845762
1
aluminium
35, 49, 58, 80
820008
1
Characteristics: fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
Dimensions at page 48
Photometric curves at page 47
17
RINO series Oval and round bulkhead fixtures
HIGH RESISTANCE Thanks to the continuous use at -40°C.
18
GUARANTEED PROTECTION Thanks to the external predisposition for fixing.
MAXIMUM SECURITY Thanks to the protective cages.
INDUSTRY
RINO series round and oval bulkhead fixtures are lighting fixtures manufactured with high quality standards for industrial products. The diffuser in anti-impact ribbed glass, lampholder in porcelain, surface treatment of passivation with fluoro-zirconium and hot polymerized polyester painting guarantee resistance of the product in any areas. We recommend to install these fixtures in those places, such as arcades, electrical substations, cold rooms and in any restricted space where you may need a long-term resistant lighting fixture.
Conformity to standards Material Surface treatment Protection rating (IP as per IEC/EN 60529) Painting Colour Resistance to impacts (IK rating as per IEC/EN 62262) Insulation class Lampholder Rated voltage
IEC/EN 60598-1 IEC/EN 60598-2-1 Aluminium alloy (body) Prismatic tempered glass (diffuser)
Lamp max power (W)
Dimensions (mm)
IK10
I E27 type in porcelain G23 type in technopolymer
Lampholder type
No. entries
Palazzoli code
Pack Q.ty
60
199x112
E27
1
831071
1
60
199x112
E27
2
831091
1
75
226x130
E27
1
831171
1
75
226x130
E27
2
831191
1
100
295x170
E27
1
831271
1
100
295x170
E27
2
831291
1
5-7-9
295x170
G23
1
831914
1
Equipment included: internal earth screws. Characteristics: E27 lampholder in porcelain.
Oval bulkhead fixtures in aluminium alloy with protective cage in steel 230V IP65
Hot polymerized non-toxic polyester
M20 cable gland technopolymer
Lamp max power (W)
Dimensions (mm)
Lampholder type
No. entries
Palazzoli code
Pack Q.ty
60
199x112
E27
1
831072
1
60
199x112
E27
2
831092
1
75
226x130
E27
1
831172
1
75
226x130
E27
2
831192
1
100
295x170
E27
1
831272
1
100
295x170
E27
2
831292
1
5-7-9
295x170
G23
1
831934
1
Equipment included: internal earth screws. Characteristics: E27 lampholder in porcelain.
230V 50-60Hz
Max cable section
2,5 mm2
Entry cable diameter
5 - 13 mm
Operating temperature
M20 cable gland technopolymer
IP65
Rated frequency
Storage temperature
Oval bulkhead fixtures in aluminium alloy with glass diffuser 230V IP65
Passivation with fluoro-zirconium
RAL7035 (body)
LUX
-50°C - +80°C -40°C - +70°C
Oval bulkhead fixtures in aluminium alloy with protective cage in aluminium 230V IP65 M20 cable gland technopolymer
Lamp max power (W)
Dimensions (mm)
Lampholder type
No. entries
Palazzoli code
Pack Q.ty
60
199x112
E27
1
831075
1
60
199x112
E27
2
831095
1
75
226x130
E27
1
831175
1
75
226x130
E27
2
831195
1
100
295x170
E27
1
831275
1
100
295x170
E27
2
831295
1
5-7-9
295x170
G23
1
831954
1
Equipment included: internal earth screws. Characteristics: E27 lampholder in porcelain.
Dimensions at page 48
19
RINO series Oval and round bulkhead fixtures
Round bulkhead fixture in aluminium alloy with glass diffuser 230V IP65
Lampholder swann type, bayonet mount for RINO lamps
M20 cable gland technopolymer
Lamp max power (W)
Dimensions (mm)
Lampholder type
No. entries
Palazzoli code
Pack Q.ty
Type
Lampholder material
Palazzoli code
Pack Q.ty
75
200x182
E27
1
830071
1
B22d 4A 250V
Brass
859412
1
Equipment included: internal earth screws. Characteristics: E27 lampholder in porcelain.
Equipment included: fixing support.
Round bulkhead fixture in aluminium alloy with protective cage in steel 230V IP65 M20 cable gland technopolymer
Lamp max power (W)
Dimensions (mm)
Lampholder type
No. entries
Palazzoli code
Pack Q.ty
75
200x182
E27
1
830072
1
Equipment included: internal earth screws. Characteristics: E27 lampholder in porcelain.
NOTE
Bespoke LED solutions available on request: warm white 3000K or neutral white 4000K
20
Dimensions at page 48
LUX
INDUSTRY
LIGHTING FIXTURE/LAMP SELECTION – MAXIMUM POWER
Power max (W)
LED module (W)
60
Luminous flux (lm)
Halogen max (W)
Electronic compact fluorescent max (W)
Warm white 3000K
Neutral white 4000K
8,7
630
640
42
15
75
8,7
940
960
53
20
100
13
1200
1250
72
23
75
17
1530
1590
53
15
LIGHTING FIXTURE/LAMP SELECTION – DIMENSIONS
A
B
A
B
60
90
38
75
110
40
100
168
43
75
90
38
B
Power max (W)
LIGHTING FIXTURE/LAMP SELECTION – SPARE PARTS Diffusers
Gaskets
Lampholder
Power max (W)
E27
60
831512
831540
75
831612
831640
100
831712
75
830512
Swann
819056
859412
831740
-
-
830540
819056
859412
21
RINO series Lighting fixtures
Conformity to standards Material Surface treatment Protection rating (IP as per IEC/EN 60529) Painting Colour Resistance to impacts (IK rating as per IEC/EN 62262) Insulation class Lampholder Rated voltage
IEC/EN 60598-1 IEC/EN 60598-2-1 Aluminium alloy (body) Prismatic tempered glass (diffuser) Passivation with fluoro-zirconium IP65 Hot polymerized non-toxic polyester RAL7035 (body)
M20 cable gland technopolymer
Lamp max power (W)
Lampholder type
No. cable glands
Palazzoli code
Pack Q.ty
60
E27
1
810071
1
75
E27
1
810171
1
100
E27
1
810271
1
Equipment included: cable glands. Characteristics: lampholder in porcelain.
IK10
I
Well glass fixtures pendant in aluminium alloy, with glass diffuser 250V IP65
E27 type in porcelain 230V
Rated frequency
50-60Hz
Max cable section
2,5 mm2
Entry cable diameter
Well glass fixtures for ceiling-mounting in aluminium alloy, with glass diffuser 250V IP65
5-13 mm
Storage temperature
-50°C - +80°C
Operating temperature
-40°C - +70°C
Lamp max power (W)
Lampholder type
No. cable glands
Palazzoli code
Pack Q.ty
60
E27
1
812071
1
75
E27
1
812171
1
100
E27
1
812271
1
Characteristics: with threaded entry with M20 threading for tube. Lampholder in porcelain.
Junction boxes in aluminium alloy for ceiling mounting of pendant lamps IP65 M20 cable gland technopolymer
Internal dimensions
No. cable glands
Frontal threading type
Palazzoli code
Pack Q.ty
Ø 62
2
1/2”
812988
1
Equipment included: internal and external earth screws and cable gland. Characteristics: cover with M20 threaded central hole for lighting fixtures pendant conduit.
22
Dimensions at page 49
LUX
INDUSTRY
Well glass fixtures, 90° angled, for wall mounting, in aluminium alloy, with glass diffuser 250V IP65 M20 cable gland technopolymer
Portable lighting fixture in thermosetting (GRP) with cage in stainless steel 250V IP65 M20 cable gland technopolymer
Lamp max power (W)
Lampholder type
No. cable glands
Palazzoli code
Pack Q.ty
Lamp max power (W)
Lampholder type
Palazzoli code
Pack Q.ty
60
E27
1
811071
1
60
E27
814052
1
75
E27
1
811171
1
100
E27
1
811271
1
Equipment included: cable glands. Characteristics: lampholder in porcelain.
Equipment included: cable entry with 1 x cable gland with M20 threading and internal cable clamp. Characteristics: diffuser in ribbed clear glass. Lampholder in porcelain.
Well glass fixtures, angled, for wall mounting, aluminium alloy, glass diffuser 250V IP65 M20 cable gland technopolymer
Lamp max power (W)
Lampholder type
No. cable glands
Palazzoli code
Pack Q.ty
60
E27
1
813071
1
75
E27
1
813171
1
100
E27
1
813271
1
Equipment included: cable glands. Characteristics: lampholder in porcelain.
Dimensions at page 49
23
RINO series Lighting fixtures
Well glass fixtures in aluminium alloy for ceiling-mounting 250V IP65
Well glass fixtures in aluminium alloy for 90° wall mounting 250V IP65
M20 cable gland technopolymer
M20 cable gland technopolymer
Lamp max power (W)
Lampholder type
No. entry stepped glands
Palazzoli code
Pack Q.ty
Lamp max power (W)
Lampholder type
No. entry stepped glands
Palazzoli code
Pack Q.ty
60
E27
1
810060
5
60
E27
1
811060
5
75
E27
1
810100
1
75
E27
1
811100
1
100
E27
1
810200
2
100
E27
1
811200
2
Equipment included: including globe-holder ring, gasket, E27 safety lampholder, and cable gland.
Equipment included: including globe-holder ring, gasket, E27 safety lampholder, and cable gland.
Well glass fixtures in aluminium alloy for pendant mounting 250V IP65
Well glass fixtures iin aluminium alloy for angled wall mounting 250V IP65
M20 cable gland technopolymer
M20 cable gland technopolymer
Lamp max power (W)
Lampholder type
No. entry stepped glands
Palazzoli code
Pack Q.ty
Lamp max power (W)
Lampholder type
No. entry stepped glands
Palazzoli code
Pack Q.ty
60
E27
1
812060
5
60
E27
1
813060
1
75
E27
1
812100
5
75
E27
1
813100
2
100
E27
1
812200
2
100
E27
1
813200
2
Equipment included: including globe-holder ring, gasket, E27 safety lampholder, and cable gland. Characteristics: with M20 threaded hole for pendant conduit. Lampholder in porcelain.
Equipment included: including globe-holder ring, gasket, E27 safety lampholder, and cable gland.
LIGHTING FIXTURE/LAMP SELECTION – MAXIMUM POWER
24
Power max (W)
LED lamp (W)
Electronic compact fluorescent E27 max (W)
60
10
15
75
11
20
100
16
23
Dimensions at page 49
LUX
INDUSTRY
Protective cages in tropicalized steel wire for cylindrical lighting fixtures
Diffusers in clear ribbed glass for cylindrical lighting fixtures
Lamp max wattage (W)
Colour
Palazzoli code
Pack Q.ty
Lamp max wattage (W)
Palazzoli code
Pack Q.ty
60
Transparent
819012
1
75
Transparent
819112
1
60
819020
1
75
819120
100
Transparent
819212
1
1
100
819220
1
Protective cages in stainless steel wire for cylindrical lighting fixtures
Diffusers in coloured glass, type UNAV 1268 for 60W cylindrical lighting fixtures
Lamp max wattage (W)
Colour
Palazzoli code
Pack Q.ty
Lamp max wattage (W)
Palazzoli code
Pack Q.ty
40
Blue
850061
1
60
819022
1
40
Yellow
850062
1
75
850172
1
40
Red
850063
1
40
Green
850064
1
Diffusers in coloured polycarbonate for for 60W cylindrical lighting fixtures
Lamp max wattage (W)
Colour
40 40
Reflectors in painted zinced steel for cylindrical lighting fixtures
Palazzoli code
Pack Q.ty
Lamp max wattage (W)
Colour
Palazzoli code
Pack Q.ty
Transparent
819015
1
60
White
819030
5
Yellow
819017
1
75
White
819130
5
40
Red
819018
1
100
White
819230
5
40
Green
819019
1
Shade in painted zinced steel for directing lighting output of cylindrical lighting fixtures
Lampholder Swann type, bayonet mount for cylindrical lighting fixtures
Type
Lampholder material
Palazzoli code
Pack Q.ty
Lamp max wattage (W)
Colour
Palazzoli code
Pack Q.ty
B22d 4A 250V
Brass
859400
1
60
Aluminium
819035
1
75
Aluminium
819135
1
100
Aluminium
819235
1
25
RINO-EX series Fluorescent lighting fixtures
26
ATEX
LUX
The stainless steel and type of protection Ex e – tb guarantee the safety in hazardous areas with gas, dust and corrosive agents
THE ADVANTAGES
THE FIXING SYSTEM DOES NOT STICK OUT The installation is safer as the amount of space is reduced.
THE LAMPHOLDER PREVENTS THE UNHOOKING It guarantees the connection of the lamp and makes the replacing easier.
VERSATILE CABLE ENTRY WITH 3 HOLES It allows to easily adapt to the different installation.
27
RINO-EX series Fluorescent lighting fixtures
GAS ZONE
0
USABLE
DUST
1
2
X
X
20
21
22
X
X
Watertight lighting fixtures in stainless steel AISI 304 suitable for applications in areas at risk of explosive atmospheres as defined in ATEX Directives 94/9/EC and 2014/34/EU. The diffuser is in tempered glass. The fixing hooks are in stainless steel AISI 304. The sealing is guaranteed by a reinforced gasket in nonageing elastomer. Complete with corrosion resistant non-loosening terminals and non-sparking lampholder. Supplied with M20 cable gland. Complete with internal and external earth connection.
ATEX Directive 94/9/EC and 2014/34/EU EN60079-0, EN60079-7, EN60079-18, EN60079-31 Conformity to standards
Directive 2006/95/EC EN 60598-1:2008 + A11: 2009 EN 60598-2-1:1989
Atex execution
Body material
Stainless steel AISI 304
Protection rating (IP as per IEC/EN 60529)
IP66
Lampholder Max cable section Entry cable diameter Insulation class Operating temperature
28
Ex e mb IIC T4 Gb Ex tb IIIC T 70 °C Db
Tempered glass
Frequency
INSTRUCTIONS
II 2G 2D
Diffuser material
Rated voltage
CERTIFICATES
Directive 2004/108/EC EN 62493:2010
110 ÷ 240 Vac-dc 0-50-60Hz G13 T8 preventing the unhooking 4 mm2 7-12 mm I -40°C ÷ +55°C
ATEX
LUX
SUITABLE FOR ZONE 1-2 (GAS) AND 21-22 (DUST)
Pair of eyebolts for pendant mounting of steel lighting fixtures with screw coupling
Stainless steel-glass lighting fixtures with white reflector for tubes T8 230V IP66
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 cable M20 ottone M20 ottonegland 1 entry M20 ottone M20 ottone
on one side
Lamp wattage (W)
brass
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
1X18
electronic
8
822181EX
1
1X36
electronic
8
822281EX
1
2X18
electronic
9
822182EX
1
2X36
electronic
9
822282EX
1
Manufacture material
Palazzoli code
Pack Q.ty
stainless steel AISI 304
820011
1
Equipment included: screws and accessories for fixing.
Characteristics: fluorescent tubes are not included. Lighting fixture predisposed with 2+1 M20 holes for in-out connection. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
Pair of swivelling supports for ceiling or wall mounting of steel lighting fixtures with screw coupling
Rotating angle
Manufacture material
Palazzoli code
Pack Q.ty
± 75°
stainless steel AISI 304
820010
1
Equipment included: screws and accessories for fixing.
Pair of collars for mounting on tube of steel lighting fixtures with screw coupling
Manufacture material
Tube diameter ø (mm)
Palazzoli code
Pack Q.ty
stainless steel AISI 304
60
820016
1
Equipment included: screws and accessories for fixing.
Pair of “V” brackets for ceiling mounting of steel lighting fixtures with screw coupling
Symmetrical reflectors for steel lighting fixtures
Manufacture material
Palazzoli code
Pack Q.ty
Manufacture material
For lighting fixtures (W)
Palazzoli code
Pack Q.ty
stainless steel AISI 304
820017
1
aluminium
18
820002
1
aluminium
36
820003
1
Equipment included: screws and accessories for fixing.
Dimensions at page 48
Photometric curves at page 47
29
RINO-EX series Fluorescent lighting fixtures
GAS ZONE
0
USABLE
1
DUST 2 X
20
21
22
X
X
Conformity to standards
Watertight lighting fixture in stainless steel AISI 304 suitable for applications in areas at risk of explosive atmospheres as defined in ATEX Directives 94/9/EC and 2014/34/EU. The diffuser is in tempered glass. The fixing hooks are in stainless steel AISI 304. The sealing is guaranteed by a reinforced gasket in nonageing elastomer. Complete with corrosion resistant non-loosening terminals and nonsparking lampholder. Supplied with M20 cable gland. Complete with internal and external earth connection.
ATEX execution
Body material
Stainless steel AISI 304
Diffuser material
Tempered glass
Frequency Lampholder type
IP66
230V 0-50-60Hz G13 T8
Max cable section
2,5 mm2
Entry cable diameter
10 - 14 mm
Emergency battery lifetime Emergency battery recharging time Insulation class Operating temperature (18W-36W)
30
Ex nA IIC T4 Gc Ex tb IIIC T 85 °C Db Ex nR IIC T6 Gc Ex tb IIIC T 70 °C Db (emergency)
Rated voltage
INSTRUCTIONS
Directive 2006/95/EC EN 60598-1:2008 + A11: 2009 EN 60598-2-1:1989 EN 60598-2-22 :1998 + A1:2003 + A2:2008 (emergency) II 3G 2D
Protection rating (IP as per IEC/EN 60529)
CERTIFICATES
ATEX Directives 94/9/EC and 2014/34/EU EN 60079-0:2009 + A11:2013 EN 60079-15:2010 EN 60079-31:2009
1h 24h I
-20°C ÷ +40°C (2 tubes) -20°C ÷ +50°C (1 tube)
ATEX
LUX
SUITABLE FOR ZONE 2 (GAS) AND 21-22 (DUST)
Pair of hooks for pendant mounting of steel lighting fixtures with through coupling
Stainless steel-glass lighting fixtures with white reflector for T8 tubes 230V IP66 soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
on one side
technopolymer
Lamp wattage (W)
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
Manufacture material
Palazzoli code
Pack Q.ty
stainless steel AISI 304
820001
1
1X18
electronic
8
822131EX
1
1X36
electronic
8
822231EX
1
1X58
electronic
8
822331EX
1
2X18
electronic
9
822132EX
1
2X36
electronic
9
822232EX
1
2X58
electronic
9
822332EX
1
(1+1)x18
emergency
9
822111EX
1
(1+1)x36
emergency
9
822211EX
1
(1+1)x58
emergency
9
822311EX
1
Equipment included: lighting fixture washers and fixing nuts.
Equipment included: pair of hooks in AISI 304 steel for pendant installation, code 820001. Characteristics: fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
Stainless steel-glass lighting fixtures with symmetrical reflector for T8 tubes 230V IP66
soffitto soffitto
Pair of swivelling supports for ceiling or wall mounting of steel lighting fixtures with through coupling
Rotating angle
Manufacture material
Palazzoli code
Pack Q.ty
± 75°
stainless steel AISI 304
820000
1
Equipment included: lighting fixture washers and fixing nuts.
inox inox verniciato verniciato polic. opalino polic. opalino
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
on one side
Lamp wattage (W)
brass
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
1X18
electronic
10
820131EX
1
1X36
electronic
10
820231EX
1
1X58
electronic
10
820331EX
1
2X18
electronic
11
820132EX
1
2X36
electronic
11
820232EX
1
2X58
electronic
11
820332EX
1
(1+1)x18
emergency
11
820111EX
1
(1+1)x36
emergency
11
820211EX
1
(1+1)x58
emergency
11
820311EX
1
Equipment included: pair of hooks in AISI 304 steel for pendant installation, code 820001. Characteristics: fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
Dimensions at page 48
Photometric curves at page 47
Pair of collars for mounting on tube of steel lighting fixtures with through coupling
Manufacture material
Tube diameter ø (mm)
Palazzoli code
Pack Q.ty
stainless steel AISI 304
60
820006
1
Equipment included: screws and accessories for fixing.
31
RINO-EX series Oval and round bulkhead fixtures
GAS ZONE
0
USABLE
1
DUST 2 X
20
21
22
X
X
Watertight bulkhead fixtures in aluminium suitable for applications in areas at risk of explosive atmospheres as defined in ATEX Directives 94/9/EC and 2014/34/EU. The body of the bulkhead fixture is treated with ecological anti-corrosion passivation with fluoro-zirconium and finished with hot polymerized scratch-resistant non-toxic polyester painting. The colour of the body is RAL 7035 light grey. The diffuser is in prismatic tempered glass. The protection cage is RAL 2011 deep orange and is attached to the body by means of stainless steel screws, while the sealing is guaranteed by a gasket in non-ageing elastomer. Predisposed for entry through M20 cable gland. Complete with internal and external earth screw.
Conformity to standards
ATEX execution
Body material Surface treatment
Ex nA IIC T 145/160/190 °C (T3) Gc Ex tb IIIC T 75/85/90 °C Db Aluminium alloy Passivation with fluoro-zirconium
Diffuser material
Prismatic tempered glass
Colour
Rated voltage
IP65
Painted tropicalized steel wire RAL 7035 (light grey) Back box RAL 2011 (deep orange) Protection cage 230V
Frequency
50-60Hz
Max cable section
2,5 mm2
Entry cable diameter
10 - 14 mm
Lampholder type Insulation class
32
II 3G 2D
Hot polymerized non-toxic polyester
Protective cage material
INSTRUCTIONS
Directive 2006/95/EC EN 60598-1:2008 + A11: 2009 EN 60598-2-1:1989
Painting
Protection rating (IP as per IEC/EN 60529)
CERTIFICATES
ATEX Directives 94/9/EC and 2014/34/EU EN 60079-0:2012 + A11:2013 EN 60079-15:2010 EN 60079-31:2014
Operating temperature
E27 in porcelain I -20°C ÷ +40°C
ATEX
LUX
SUITABLE FOR ZONE 2 (GAS) AND 21-22 (DUST)
Oval bulkhead fixtures in aluminium alloy with steel protective cage 230V IP65
Lamp/Bulkhead correspondence
A
B B
M20 cable gland technopolymer
Power (W)
Dimensions (mm)
Palazzoli code
Pack Q.ty
18
199x112
831072EX
1
28
226x130
831172EX
1
53
295x170
831272EX
1
Equipment included: internal and external earth screw and cable gland.
Dimensions Fixtures type
Round bulkhead fixtures in aluminium alloy with steel protective cage 230V IP65
Power (W)
A (mm)
B (mm)
18
90
38
28
110
40
53
168
43
28
90
38
M20 cable gland technopolymer
Power (W)
Dimensions (mm)
Palazzoli code
Pack Q.ty
28
200x182
830072EX
1
Equipment included: internal and external earth screw and cable gland.
Dimensions at page 48
33
TUNNEL 54 series LED and fluorescent lighting fixtures
HIGH EFFICIENCY State-of-the-art LEDs grant economical and technical advantages to the product.
34
HIGH HEAT DISSIPATION High dissipation shape guarantees an optimal operating temperature for the LEDs.
HIGH VERSATILITY The variable shape body allows the maximum versatility of customized solutions.
LUX
TUNNEL
The TUNNEL54 LED range is the new and complete system of lighting fixtures for entrances and central parts of the tunnels. They have great installation flexibility thanks to the new range of accessories for mounting on cable tray with different heights or directly on the wall or ceiling.
Conformity to standards
IEC IEC IEC IEC IEC
EN EN EN EN EN
60598-1+AMD11:2009, 60598-2-3+A1:2011 62471, IEC EN 62471, 62384, 62031, IEC EN 60950-1;
2004/108/EC - 2006/95/EC 2011/65/EU (RoHS) - 2012/19/ EU 2006/95/EC (low voltage) 2004/108/EC (electromagnetic compatibility) 2005/327EC (EUP)
LED tunnel lighting fixture for permanent lighting with axially symmetrical and transversally symmetrical optic IP66 No. Led
Power (W)
Luminous flux (lm)
Photometric curves
Palazzoli code
Pack Q.ty
4
34
4160
3
154304
1
6
51
6240
3
154306
1
8
68
8320
3
154308
1
12
103
12480
3
154312
1
Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
ENEC in progress for approval Body material
Black anodized extruded aluminium alloy
Support material
Stainless steel AISI 304
Diffuser material
Tempered glass
Protection rating (IP as per IP66 IEC/EN 60529) Resistance to impacts (IK rating as per IEC/EN 62262)
IK09
Insulation class
II £
Power cable
FTG10(O)M1 L.1,5m
Power plug Mains voltage
No. Led
Power (W)
Photometric curves
Palazzoli code
Pack Q.ty
16A 2P+Q IP66 IEC EN 60309-1; IEC EN 60309-2
Luminous flux (lm)
4
34
4160
4
154404
1
6
51
6240
4
154406
1
230V 50Hz
8
68
8320
4
154408
1
12
103
12480
4
154412
1
Overvoltage protection
4 kV EN 61000
Power factor
Cos φ > 0,9
Reference AT LED device efficiency Colour temperature CRI Junction temperature
LED tunnel lighting fixture for permanent and reinforcing lighting with axially symmetrical and transversally 20° asymmetrical optic IP66
25°C 106 lm/W
18
154
18720
4
154418
1
24
205
24960
4
154424
1
30
257
31200
4
154430
1
36
308
37440
4
154436
1
42
359
43680
4
154442
1
48
410
49920
4
154448
1
54
462
56160
4
154454
1
Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
5000K (others colour temperature on request) ≥ 70 < 85°C
Driving 700mA current Device lifetime
L80 B20 @80.000h Ta=25°C
Operating -25°C - +40°C temperature
Dimensions at page 46
Photometric curves at page 44
35
TUNNEL 54 series LED and fluorescent lighting fixtures
LED tunnel lighting fixture for reinforcing lighting with axially 60° counter-beam and transversally symmetrical optic IP66 No. Led
Power (W)
Luminous flux (lm)
Photometric curves
Palazzoli code
Pack Q.ty
6
51
6240
5
154606
1
12
103
12480
5
154612
1
18
154
18720
5
154618
1
24
205
24960
5
154624
1
30
257
31200
5
154630
1
36
308
37440
5
154636
1
42
359
43680
5
154642
1
48
410
49920
5
154648
1
54
462
56160
5
154654
1
Pair of supports in stainless steel for rapid fixing of LED lighting fixtures for permanent lighting
Manufacture material
Tray dimensions
Palazzoli code
Pack Q.ty
Stainless steel AISI 304
100x75 200x75 300x75 100x100 200x100 300x100
151910 151911 151912 151913 151914 151915
1 1 1 1 1 1
Pair of supports in stainless steel for rapid adjustable fixing of LED lighting fixtures for reinforcing lighting
Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
Manufacture material
Tray dimensions
Palazzoli code
Pack Q.ty
Stainless steel AISI 304
100x75 200x75 300x75 100x100 200x100 300x100
151920 151921 151922 151923 151924 151925
1 1 1 1 1 1
GUIDE TO SELECT THE FIXTURES – LUMINANCE LEVELS
THRESHOLD ZONE
TRANSITION ZONE
INTERIOR ZONE
EXIT ZONE
reinforcing lighting permanent lighting
THE PERMANENT LIGHTING is uniformly distributed from the access zone to the exit zones. THE REINFORCING LIGHTING is installed in the access and threshold zone.
In the access zone, the reinforcing lighting must keep the same luminance level of the environment out of the tunnel, so as that the driver can recognize an obstacle placed on the route.
In the threshold zone, the luminance levels must be lower than those of the access zone, so as that the driver can adapt to the lower levels of the interior zone.
36
Photometric curves at page 46
Dimensions at page 49
TUNNEL
TUNNEL54 fluorescent range is the system of lighting fixtures for lighting niches, traffic lanes technical rooms and for ordinary and emergency lighting. Lighting fixtures can be supplied in special execution complete with brackets for rapid fastening to channel and/or wired with cable and plug.
Stainless steel-glass lighting fixtures with symmetrical reflector and electronic ballast 230V IP66
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
LUX
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
on one side
Power (W)
Conformity to standards
Body material
IEC/EN 50200 IEC/EN 50362 European Directive 2004/54/CE ANAS 7735 memorandum Guide lines for safety planning in road tunnels IEC/EN 60309-1 IEC/EN 60309-2 IEC/EN 60309-4
brass
Power supply
Lampholder and lamps
Protection rating (IP as per IEC/EN 60529)
IP66
Resistance to impacts (IK rating as per IEC/EN 62262)
IK09
Insulation class
Electronic
G13 T8
11
152132
1
Electronic
G13 T8
11
152232
1
2x54
Electronic
G5 T5
14
152962
1
Characteristics: lighting fixtures can be supplied in special execution complete with brackets for rapid fastening to channel and/or wired with cable and plug. Fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
Stainless steel-glass lighting fixtures with asymmetrical reflector and electronic ballast 230V IP66
Lampholder Rated voltage
G13 T8 / G5 T5
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per testata N.N. 2 2 tappi N.N. 2 2 pressacavi 2 2 ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone 1 entry M20 cable gland
on one side
brass
Power supply
Lampholder and lamps
Photometric curves
Palazzoli code
Pack Q.ty
2x18
Electronic
G13 T8
12
153132
1
2x36
Electronic
G13 T8
12
153232
1
2x54
Electronic
G5 T5
15
153962
1
Characteristics: lighting fixtures can be supplied in special execution complete with brackets for rapid fastening to channel and/or wired with cable and plug. Fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
230V
Rated frequency
0-50-60Hz
Max cable section
2,5mm2
Entry cable diameter
7-14 mm
Operating temperature
inox inox verniciato verniciato polic. opalino polic. opalino
Power (W)
II £
Pack Q.ty
2x18
Stainless steel AISI 304 Tempered glass
Palazzoli code
2x36
soffitto soffitto
Diffuser material
Photometric curves
-25°C - +50°C
Pair of supports for rapid mounting of tunnel lighting fixtures Manufacture material
Applications
Palazzoli code
Pack Q.ty
Stainless steel AISI 304
for L 200mm channel
820004
1
Stainless steel AISI 304
for L 300mm channel
820005
1
Pair of swivelling supports for ceiling or wall mounting of steel lighting fixtures
Dimensions at page 49
Photometric curves at page 46
Manufacture material
Rotating angle
Palazzoli code
Pack Q.ty
Stainless steel AISI 304
± 75°
820000
1
37
RINO series LED and fluorescent lighting fixtures
CORROSION RESISTANT Thanks to the total absence of welded joints.
38
VIBRATION FREE Thanks to the fixing pins and preassembled anti-vibration systems.
HIGH PERFORMANCE Thanks to the diffuser in polycarbonate, unbreakable, with V2 self-extinguishing grade, anti yellowing, stabilized against UV rays.
MARINE
LUX
LED LIGHTING FIXTURES FOR CEILING/WALL RINO lighting fixtures in painted stainless steel for marine applications are manufactured to perfectly fit the area where they are installed. They are available in versions for outdoor with body in white painted stainless steel AISI 316 with opal white diffuser, and for indoor with body in white painted zinced steel with transparent polycarbonate diffuser.
soffitto soffitto
soffitto
inox inox verniciato verniciato
inox verniciato polic. opalino
4000K LED lighting fixtures in painted steel-transparent polycarbonate 230V IP67
polic. opalino polic. opalino
con riflettore bianco
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per N. 2 testata tappi N.N. 2 2 tappi N.2 22 pressacavi N.N. 2 2 pressacavi 2 ingressi per testata ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone M20 ottone 2 entries 1 entry M20 ottone M20 cable gland
on one side
Conformity to standards
Directive 2006/95/EC EN 60598-1:2008+A11:2009 EN 60598-2-1:1989 EN 62471:2008 Directive 2004/108/EC EN 62493:2010 Directive 2011/65/EC
Material
Stainless steel AISI 316L Painted zinced steel
Painting
Non-toxic polyester resistant to atmospherical agents and UV rays
Diffuser material Protection rating (IP as per IEC/EN 60529) Colour Resistance to impacts (IK rating as per IEC/EN 62262) LED colour temperature CRI Lampholder for fluorescent tubes Rated voltage Frequency Max cable section Entry cable diameter
IP67 RAL 9016 white IK09 4000K on request 3000K; 6500K ≥ 80 G5 T5
Photometric curves
Palazzoli code
Pack Q.ty
690
3170
electronic
1
849141
1
690
5900
electronic
1
849142
1
50 (25+25)
1300
5900
electronic
1
849243
1
25
690
3170
emergency
1
849171
1
50 (2x25)
690
5900
emergency
1
849172
1
50 (25+25)
1300
5900
emergency
1
849273
1
Equipment included: 2 x 2P+Q terminal blocks for in and out from the power supply. No. 2 cable glands and No. 1 screwcap in nickeled brass. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
soffitto soffitto
inox inox verniciato verniciato
inox verniciato polic. opalino
4000K LED lighting fixtures in painted steel-opaline polycarbonate 230V IP67
polic. opalino polic. opalino
con riflettore bianco
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per N. 2 testata tappi N.N. 2 2 tappi N.2 22 pressacavi N.N. 2 2 pressacavi 2 ingressi per testata ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone M20 ottone 2 entries 1 entry M20 ottone M20 cable gland
on one side
brass
on one side
Power (W)
Length (mm)
Luminous flux (lm)
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
25
690
3170
electronic
1
841141
1
50 (2x25)
690
5900
electronic
1
841142
1
50 (25+25)
1300
5900
electronic
1
841243
1
25
690
3170
emergency
1
841171
1
50 (25+25)
1300
5900
emergency
1
841273
1
Equipment included: 2 x 2P+Q terminal blocks for in and out from the power supply. No. 2 cable glands and No. 1 screwcap in nickeled brass. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
180V -260V 0-50-60Hz (electronic) 2,5 mm2 7 - 15 mm
Emergency battery recharging time
24h
Dimensions at page 48
Power supply
25
soffitto
3h
Operating temperature
Luminous flux (lm)
Polycarbonate and opale policarbonate
Emergency battery lifetime
Storage temperature
Length (mm)
50 (2x25)
4000K LED lighting fixtures in painted stainless steel AISI 316L-opaline polycarbonate 230V IP67
soffitto soffitto
soffitto
inox inox verniciato verniciato
inox verniciato polic. opalino
Insulation class
brass
on one side
Power (W)
polic. opalino polic. opalino
con riflettore bianco
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per N. 2 testata tappi N.N. 2 2 tappi N.2 22 pressacavi N.N. 2 2 pressacavi 2 ingressi per testata ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone M20 ottone 2 entries 1 entry M20 ottone M20 cable gland
I -40°C - +70°C -20°C - +40°C (Special solutions available on request for extremely cold temperature storage)
Photometric curves at page 46
on one side
brass
on one side
Power (W)
Length (mm)
Luminous flux (lm)
Photometric curves
Palazzoli code
Pack Q.ty
1
25
690
3170
1
878141
50 (2x25)
690
5900
1
878142
1
50 (25+25)
1300
5900
1
878243
1
Equipment included: 2 x 2P+Q terminal blocks for in and out from the power supply. No. 2 cable glands and No. 1 screwcap in nickeled brass. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
39
RINO series LED and fluorescent lighting fixtures
LED LIGHTING FIXTURES FOR BULKHEAD
GUIDE TO CHOOSE LED LIGHTING FIXTURES
4000K LED lighting fixtures in painted stainless steel-opaline polycarbonate for bulkhead 230V IP67
Power (W)
Length (mm)
Luminous flux (lm)
Photometric curves
Palazzoli code
25
690
3170
1
878741
1
50 (2x25)
690
5900
1
878742
1
25W led with luminous flux of 3170 Lm
Pack Q.ty
2x25W with luminous flux of 5800 Lm
Equipment included: 2 x 2P+Q terminal blocks for in and out from the power supply. Note: the lighting fixture is completed with the code 820007. The photometric curves (LDT files) can be found on www.palazzoli.com.
25+25W with luminous flux of 5800 Lm
Pair of supports in painted stainless steel for bulkhead
40
Manufacture material
Palazzoli code
Pack Q.ty
stainless steel AISI 316L
820007
1
Photometric curves at page 46
Dimensions at page 48
MARINE
LUX
FLUORESCENT LIGHTING FIXTURES FOR CEILING/WALL FLUORESCENT LIGHTING FIXTURES FOR BULKHEAD
soffitto
inox verniciato polic. opalino
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
con riflettore bianco
Fluorescent lighting fixtures for bulkhead in painted stainless steel-opaline polycarbonate for tubes T5 230V IP67
Fluorescent lighting fixtures in painted steel-transparent polycarbonate for tubes T5 230V IP67
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per N. 2 testata tappi N.N. 2 2 tappi N.2 22 pressacavi N.N. 2 2 pressacavi 2 ingressi per testata ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone M20 ottone 2 entries 1 entry M20 ottone M20 cable gland
on one side
Power (W)
brass
on one side
Length (mm)
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
Power (W)
Length (mm)
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
2x14
690
electronic
6
849062
1
2x14
690
electronic
7
881062
1
2x24
690
electronic
6
849562
1
2x24
690
electronic
7
881562
1
2x28
1300
electronic
6
849462
1
1+1x14
690
emergency
6
849011
1
1+1x24
690
emergency
6
849511
1
1+1x28
1300
emergency
6
849411
1
Equipment included: 2 x 2P+Q terminal blocks for in and out from the power supply. Characteristics: fluorescent tubes are not included. Note: the lighting fixture is completed with the code 820007. The photometric curves (LDT files) can be found on www.palazzoli.com.
Equipment included: 2 x 2P+Q terminal blocks for in and out from the power supply. No. 2 cable glands and No. 1 screwcap in nickeled brass. Characteristics: fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
soffitto
inox verniciato polic. opalino
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
con riflettore bianco
Pair of supports in painted stainless steel for bulkhead
Fluorescent lighting fixtures in painted steel-opaline polycarbonate for tubes T5 230V IP67
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per N. 2 testata tappi N.N. 2 2 tappi N.2 22 pressacavi N.N. 2 2 pressacavi 2 ingressi per testata ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone M20 ottone 2 entries 1 entry M20 ottone M20 cable gland
on one side
brass
on one side
Power (W)
Length (mm)
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
2x14
690
electronic
7
841062
1
2x24
690
electronic
7
841562
1
2x28
1300
electronic
7
841462
1
1+1x14
690
emergency
7
841011
1
1+1x28
1300
emergency
7
841411
1
Manufacture material
Palazzoli code
Pack Q.ty
stainless steel AISI 316L
820007
1
Equipment included: 2 x 2P+Q terminal blocks for in and out from the power supply. No. 2 cable glands and No. 1 screwcap in nickeled brass. Characteristics: fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
soffitto
inox verniciato polic. opalino
Fluorescent lighting fixtures in painted stainless steel AISI 316L-opaline polycarbonate for tubes T5 230V IP67
soffitto soffitto
inox inox verniciato verniciato polic. opalino polic. opalino
con riflettore bianco
con riflettore con riflettore bianco bianco
tappi pressacavi ingressi per N. 2 testata tappi N.N. 2 2 tappi N.2 22 pressacavi N.N. 2 2 pressacavi 2 ingressi per testata ingressi per testata M20 ottone M20 ottone M20 ottone M20 ottone M20 ottone 2 entries 1 entry M20 ottone M20 cable gland
on one side
Power (W)
on one side
brass
Length (mm)
Power supply
Photometric curves
Palazzoli code
Pack Q.ty
2x14
690
electronic
7
879062
1
2x24
690
electronic
7
879562
1
2x28
1300
electronic
7
879462
1
Equipment included: 2 x 2P+Q terminal blocks for in and out from the power supply. No. 2 cable glands and No. 1 screwcap in nickeled brass. Characteristics: fluorescent tubes are not included. Note: the photometric curves (LDT files) can be found on www.palazzoli.com.
Dimensions at page 48
Photometric curves at page 46
41
NAUTILUX series Lighting units for furnishing
GRACEFUL Thanks to polished brass and etched glass.
42
RELIABILITY Thanks to the elastomer gaskets and stainless steel screws.
IT CAN BE INSTALLED EVERYWHERE Thanks to noble materials and studied finishing.
ARCHITECTURAL
NAUTILUX combines the features of using high quality traditional materials with the fixture design associated with maritime applications, ships, sailing crafts, ports and marinas. The use of high quality brass and etched glass, with components which together will resist tough waterside environments associated with its traditional applications. Suited to both outdoor and indoor applications, NAUTILUX could be used to enhance the architecture of many spaces including theatres, restaurants, clubs, and retail as well as the traditional marine applications.
LUX
Oval bulkhead fixtures in brilliant solid brass with etched glass diffuser 230V IP44
Lamp max wattage (W)
Lampholder No.
Cable entry
Palazzoli code
Pack Q.ty
Type
75
1
E27
rear with stepped gland
861100
1
100
1
E27
rear with stepped gland
861200
1
Equipment included: stepped gland in insulating material grommet type.
Conformity to standards Material Protection rating (IP as per IEC/EN 60529) Resistance to impacts (IK rating as per IEC/EN 62262) Insulation class Lampholder
IEC/EN 60598-1 IEC/EN 60598-2-1
Oval bulkhead fixtures in brilliant solid brass with eyelid shield and etched glass 230V IP44
Polished brass (body) Etched glass (diffuser) IP44 - IP66
IK10 (body)
Lamp max wattage (W)
Lampholder No.
Type
1
E27
20W electronics
I
Cable entry
Palazzoli code
Pack Q.ty
rear with stepped gland
861211
1
Equipment included: stepped gland in insulating material grommet type.
E27 type in porcelain
Rated voltage
230V
Rated frequency
50Hz
Max cable section
2,5 mm2
Storage temperature
-50°C - +80°C
Operating temperature
-40°C - +70°C
Well glass fixtures in brilliant solid brass with etched glass diffuser 230V IP44
Lamp max wattage (W)
75
Lampholder No.
1
Cable entry
Type
E27 with protected terminal block
Palazzoli code
Pack Q.ty
861140
1
Well glass fixtures iin aluminium alloy with ribbed glass diffuser 230V IP44
Lamp max wattage (W)
Dimensions at page 50
Lampholder No.
Cable entry
Type
Palazzoli code
Pack Q.ty
60
1
E27 with protected terminal block
816071
1
75
1
E27 with protected terminal block
816171
1
100
1
E27 with protected terminal block
816271
1
43
NAUTILUX series Lighting units for furnishing
Suspended fixtures in brilliant solid brass with steel wire 230V IP22
Oval bulkhead fixtures in brilliant solid brass with etched glass diffuser 230V IP66
M24 cable gland brass
Lamp max wattage (W)
Lampholder
Protection
Palazzoli code
Pack Q.ty
E27
without glass
861505
1
M24x1,5
75
1
E27
1
860100
1
E27
with glass
861506
1
M24x1,5
100
1
E27
1
860200
1
No.
Type
6x40
6
6x40
6
Cable glands
Max wattage (W)
No. Type No. cable lampholder lampholder glands
Palazzoli code
Pack Q.ty
Equipment included: cable glands.
Suspended fixtures in brilliant solid brass 230V IP22
Lamp max wattage (W)
Lampholder
Oval bulkhead fixtures in brilliant solid brass with eyelid shield and etched glass 230V IP66
Protection
Palazzoli code
Pack Q.ty
No.
Type
6x40
6
E27
without glass
861507
1
6x40
6
E27
with glass
861508
1
M24 cable gland brass
Cable glands
Max wattage (W)
M24x1,5
20W electronic
No. Type No. cable lampholder lampholder glands
1
E27
1
Palazzoli code
Pack Q.ty
860211
1
Equipment included: cable glands.
Steel wire in brass with ceiling rose for pendant lamps
Pendant lamp
Washer diameter Ø (mm)
Length (cm)
Palazzoli code
Pack Q.ty
861507 / 861508
195
200
861510
1
44
Dimensions at page 50
ARCHITECTURAL
Well glass fixtures in brilliant solid brass with etched glass diffuser 250V IP66
Large fixtures in polished brass, diffuser in etched and heat-resistant glass 250V - IP66
M24 cable gland brass
Cable glands
Max wattage (W)
M24x1,5
75
LUX
M24 cable gland brass
No. Type No. cable lampholder lampholder glands
1
E27
1
Palazzoli code
Pack Q.ty
Cable glands
Max wattage (W)
860140
1
M24x1,5
100
Equipment included: cable glands.
No. Type No. cable lampholder lampholder glands
1
E27
1
Palazzoli code
Pack Q.ty
860240
1
Equipment included: cable glands.
Plate in stainless steel for wall mounting of 75W cylindrical lighting fixtures
Rotary control switch UNAV 2162 , in solid brass enclosure 250V - IP66 M24 cable gland brass
Description
Palazzoli code
Pack Q.ty
Rated current (A)
Poles
Cable glands
No. cable glands
Palazzoli code
Pack Q.ty
stainless steel plate for fixing to the wall
860900
1
10
1
M24x1,5
1
861550
1
Equipment included: cable glands.
Junction box UNAV 1398, in solid brass with terminal block IP66
Plate in nickeled steel for ceiling-mounting of 75W cylindrical lighting fixtures
M24 cable gland brass
Description
Palazzoli code
Pack Q.ty
Internal diameter (mm)
Cable glands
No. cable glands
Terminal blocks
Palazzoli code
Pack Q.ty
nickeled steel plate for ceiling fixing
860990
1
70
M24x1,5
2
4x6 mm2
861551
1
Equipment included: No. 2 cable glands.
Dimensions at page 50
45
Luminaire Code 842142 Name RINO-LED Measurem. Code PALAZZOLI 487-QL16-S07 Name RINO-LED
Luminaire Code 820242 Name 820242 Measurem. Code PALAZZOLI 1087-QL15-S01 820242 Name 820242
Luminaire Flux
2110.90 lm
Luminaire Power
Lamps Flux
2110.90 lm
Maximum value
21.89 W 403.35 cd/klm
700 mm 700 mm
Efficacy
96.43 lm/W
Position
C=0.00 G=0.00
Efficiency Luminaire Flux
Width Width
190 mm 190 mm
100.00% 5453.41 lm
Luminaire Power
CGFlux Double Symmetrical Lamps 5453.41 lm
47.75 W
Maximum value
528.52 cd/klm
Efficacy
114.21 lm/W
Position
C=0.00 G=2.50
CG Double Symmetrical
Efficiency
100.00%
Width Width
195 mm 60 mm
Height Height
Rectangular Luminaire Rectangular Luminous Area
Length Length
Height 100 mm Rectangular Luminaire Height 1 mm Area Rectangular Luminous
Length Length
Horizontal Luminous Area Emitting area on Plane 0° Emitting area on Plane 90°
0.133000 m2 0.000700 m2 0.000190 m2
Emitting area on Plane 180° Emitting area on Plane 270° Glare area at 76°
0.000700 Horizontalm2 Luminous Area 0.000190 m2 on Plane 0° Emitting area 0.032855 m2 on Plane 90° Emitting area
0.067200 m2 0.001120 m2 0.000060 m2
Emitting area on Plane 180° Emitting area on Plane 270° Glare area at 76°
0.001120 m2 0.000060 m2 0.017344 m2
Coordinate system Date Measurement Distance
CG 19-04-2016 0.00
Symmetry Type Maximum Gamma Angle Measurement Flux
Double Symmetrical Coordinate system 90 Date 2110.90 lm Measurement Distance
CG 29-10-2015 0.00
Symmetry Type Maximum Gamma Angle Measurement Flux
Double Symmetrical 90 5453.41 lm
Operator Temperature Humidity Notes
1.51.05 25.00 °C 60.00 %
Source voltage Source current Photocell
Operator Temperature Humidity Notes
6.57.01 25.00 °C 60.00 %
Source voltage Source current Photocell
90 mm 1 mm
Made in an accredited laboratory conforming to UNI EN 13032-1-4 and IES LM 79-08 Standards
Line
Luminaire Lamps Name LED - 21.89 W
Code LED C.I.E. F UTE
1350 mm 1120 mm
52 83 97 100 100 1.00 D
Flux [lm] Line 2110.90
D DIN 5040 B NBN
LED
A40 BZ 4
Pow. [W] 21.89
Q.ty 1
C.I.E. F UTE
700mm x 190mm
Luminaire Lamps Name led - 47.75 W
Code led
60 92 99 100 100 1.00 C
Flux [lm] 5453.41
D DIN 5040 B NBN
Pow. [W] 47.75
Q.ty 1
A40 BZ 3
1350mm x 195mm
90
Gamma Angles
120°
Gamma Angles
180°
90
105°
105°
180
270
150
105°
105°
270 90°
90°
C Halfplanes
90°
90°
C Halfplanes
180.0
0.0
270.0
90.0
90
75°
180.0
0.0
270.0
75°90.0
75°
60°
60°
180
60°
150
Luminaire Flux
39432.00 lm
Lamps Flux
39432.00 lm
Luminaire Power Maximum value
Horizontal Luminous Area Emitting area on Plane 0° Emitting area on Plane 90°
410.00 W 419.99 cd/klm
15°
261 mm 183 mm
Efficacy
96.18 lm/W
Position 450 Width Width
0°
Luminaire Efficiency Flux
0.133224 m2 0.000000 m2 0.000000 m2
Emitting area on Plane 180° Emitting area on Plane 270° Glare area at 76°
CG Roads 02-07-2014 0.00
Symmetry Type Maximum Gamma Angle Measurement Flux
Operator Temperature Humidity Notes
AZ 25.00 °C 60.00 %
Source voltage Source current Photocell
Line
LED TUNNEL
Maximum value
Height Rectangular 77 mm 30° Luminaire Height Rectangular Luminous 0 mm Area 0.000000 Horizontal m2Luminous Area 0.000000 Emitting m2 area on Plane 0° 0.032230 Emitting m2 area on Plane 90°
Length30° Length
Flux [lm] Line 39432.00 A20
Pow. [W] 410.00
Q.ty 1
C.I.E.
462.00 W 452.43 cd/klm
261 mm 183 mm
15°
95.03 lm/W
Luminaire Efficiency Flux
Position 750
C=10.00 G=61.00 1360 mm 15° 807 mm
180
180°
0
Length Length
154.00 W 986.81 cd/klm
630 mm 320 mm
Efficacy
103.77 lm/W
Efficiency
100.00%
Position
C=90.00 G=52.50
CG Asymmetrical
Width Width
240 mm 200 mm
Height Height
80 mm 1 mm
Emitting area on Plane 180° Emitting area on Plane 270° Glare area at 76°
0.000000 Horizontalm2 Luminous Area 0.000000 Emitting area m2 on Plane 0° 0.035727 Emitting area m2 on Plane 90°
0.064000 m2 0.000320 m2 0.000200 m2
Emitting area on Plane 180° Emitting area on Plane 270° Glare area at 76°
0.000320 m2 0.000200 m2 0.015793 m2
Symmetry Type Maximum Gamma Angle Measurement Flux
Page 1 Sym. Coordinate on planes system 270-90 180 Date 43902.00 Measurement lm Distance
CG 30-09-2015 0.00
Symmetry Type Maximum Gamma Angle Measurement Flux
Asymmetrical 90 15979.86 lm
25.00 °C 60.00 %
Source voltage Source current Photocell
0.07.25 25.00 °C 60.00 %
Source voltage Source current Photocell
Operator Temperature Humidity Notes
Luminaire Lamps Name 54M 700mA PA1 bin U - 462.00 W
Code 54M 700mA PA1 bin U
Flux [lm] Line 43902.00
D DIN 5040
A20
Pow. [W] 462.00
Q.ty 1
C.I.E. F UTE
Luminaire Lamps Name LED - 154.00 W
Code LED
36 80 99 100 100 1.00 F
Flux [lm] 15979.86
D DIN 5040 B NBN
Pow. [W] 154.00
Q.ty 1
A20 BZ 6 / 0.8 / BZ 5 / 4 / BZ 4
630mm x 240mm
120° 170 180
150
105°
Luminaire Power Maximum value
Height Rectangular 77 mm 30° Luminaire Height Rectangular Luminous 0 mm Area
CG Roads 30-03-2012 0.00
90 Gamma Angles
100.00% 15979.87 lm
cd/klm
Lamps CGFlux Sym. on planes 15979.86 270-90 lm
0.147681 m2 0.000000 m2 0.000000 m2
36 69 94 100 100
90
Efficacy
Width 0° Width
2 - Narrow beam
Operator Temperature Humidity Notes
D DIN 5040
Luminaire Code STLP18RS1RE07 45° Name STLP18RS1RE07 Measurem. Code PALAZZOLI 189-QL15-S48 STLP18RS1RE07 Name STLP18RS1RE07
600
Luminaire Power
Lamps CG Flux Sym. on planes 270-90 43902.00 lm
15°
1 LITESTAR SrlPage www.oxytech.it Sym. Coordinate on(c)OxyTech planes system 270-90 180 Date 39432.00 Measurement lm Distance
Luminaire Lamps Name 48M 700mA PS1 bin U - 410.00 W
Code 48M 700mA PS1 bin U 40 75 97 100 100
100.00% 43902.00 lm
cd/klm
C=0.00 G=59.00 1281 mm 728 mm
1 - Wide beam
LITESTAR (c)OxyTech Coordinate system Srl www.oxytech.it Date Measurement Distance
60°
450 Luminaire ULOR 0.00 % Code P154454 45° ASIMMETRICA 56160lm 45° Name PERMANENTE DLOR 100.00 % Measurem. PA16M07 RN Code 0.00 % Name PERMANENTE ASIMMETRICA 56160lm
360
Length30° Length
Rectangular Luminaire Rectangular Luminous Area
75°
300
270 Luminaire ULOR 0.00 % Code P154348 45° Name PERMANENTE DLOR 100.00 % SIMMETRICA 49920llm Measurem. PS14M07 RNCode 0.00 % Name PERMANENTE SIMMETRICA 49920llm
C.I.E.
120°
0
0
180
90
180°
Gamma Angles
90
180°
10 0
120°
Gamma Angles
180°
120°
0
105°
150
105°
180
105°
250
105°
105°
270 270
270
90°
C Halfplanes 270.0 180.0
0.0 90.0
150
75°
Luminaire Code 822232 Name 822232 Measurem. Code PALAZZOLI 910-QL14-S21 822232 ULOR 0.03 % 45° Name 822232 DLOR 99.97 % Luminaire Flux 0.03 % 13190.62 lm Luminaire Power RN 3631.88 lm
170.0
300
60°
Lamps Flux
Maximum value
Rectangular Luminaire Rectangular Luminous Area
Length Length
Horizontal Luminous Area Emitting area on Plane 0° Emitting area on Plane 90°
0.24700030° m2 0.001300 m2 0.000190 m2
64.00 W
Efficacy
1114.00 cd/klm
Position
1300 mm 1300 mm
600 206.10 lm/W C=0.00 G=25.00
Width Width
15°
190 mm
15°
Symmetry Type Maximum Gamma Angle Measurement Flux
C.I.E. F UTE
44 79 97 100 363 3.63 E
D DIN 5040 B NBN
MARINE
60°
60°
Flux [lm] 3631.88
150
Maximum value Length Length
0.001300 m2 Horizontal Luminous Area 30° 0.000190 m2 on Plane 0° Emitting area 0.061016 m2 on Plane 90° Emitting area
0.14000030° m2 0.000700 m2 0.000200 m2
Pow. [W] 64.00
Q.ty 1
C.I.E. F UTE
270.0
75°90.0
75°
60°
60°
Gamma Angles
28.00 W 361.61 cd/klm
700 mm 700 mm
600
Efficacy Position Width Width
15°
85.05 lm/W
250
105°
180
Gamma Angles
100.00 %
180
105°
270
CG Double Symmetrical
15°
90°
90°
C Halfplanes
100 mm
270.0
90.0
180.0
Flux [lm] 2381.31
Pow. [W] 28.00
Q.ty 1
250
75°
270.0
500
60°
0.00 %
DLOR
363.19 %
105°
90°
75°
60°
60°
80
1000
ULOR
0.00 %
DLOR
100.00 %
RN
15°
0°
15°
46
45°
45° 320
0.00 %
LITESTAR
cd/klm
400
30°
6 - T5 - 2 tubes - Transparent
(c)OxyTech Srl www.oxytech.it
45°
cd/klm
1250 30°
60°
240
45°
0.00 %
75°
160
750 ULOR
120°
90°
0.0 75°90.0
30°
15°
0°
15°
7 - T5 - 2 tubes - Opaline
1 (c)OxyTech SrlPage www.oxytech.it
15°
0°
5 - Counter-beam
Double Symmetrical 90 2381.31 lm LITESTAR (c)OxyTech SrlPage www.oxytech.it 1
A30 BZ 4
30°
Page 1
cd/klm
1250 30°
C Halfplanes
0.0
45°
cd/klm1 mm
80
105°
60°
1000
0.000700 m2 30° 0.000200 m2 0.034548 m2
270
180.0
500
0.00 %100.00%
180°
0
75°
45°
Height Height
Source voltage Source current Photocell
D DIN 5040 B NBN
DLOR
45°
C=0.00 G=0.00
Emitting area 0° on Plane 180° Emitting area on Plane 270° Glare area at 76°
Luminaire Lamps Name LED - 28.00 W
0.00 %
200 mm
.46.19 25.00 °C 60.00 %
Code LED
ULOR RN Efficiency
750 200 mm
Symmetry Type Maximum Gamma Angle Measurement Flux
120°
0
250
750
CG 29-09-2015 0.00
49 82 98 100 100 1.00 E
90
180°
90°
450
700mm x 200mm
90
LITESTAR
90°
0.0
300
Height 95 mm Rectangular Luminaire cd/klm Height 1 mm Area Rectangular Luminous
Line
A30 BZ 5 / 2.5 / BZ 4
1300mm x 190mm
RN
180.0
4 - 20° Asymmetrical
Source voltage Source current Photocell Luminaire Lamps Name 2X36W/840 OSRAM - 64.00 W
75°
Double Symmetrical Coordinate system 90 Date 3631.88 lm Measurement Distance LITESTAR (c)OxyTech SrlPage www.oxytech.it 1 Operator Temperature Humidity Notes
3 - Symmetrical Code 2X36W/840 OSRAM
90° C Halfplanes
CG Flux Double Symmetrical Lamps 2381.31 lm
750 190 mm
Emitting area 0° on Plane 180° Emitting area on Plane 270° Glare area at 76°
90°
0.0 75°90.0 10.0
Luminaire Code 822142 Name 822142 Measurem. ULOR 0.15 % Code PALAZZOLI 189-QL15-S47 822142 45° 45° Name 822142 DLOR 99.85 % Efficiency Luminaire Flux 0.15 %363.19% 2381.31 lm Luminaire Power RN
450
Coordinate system CG Date 12-01-2015 Measurement Distance 0.00 LITESTAR (c)OxyTech Srl www.oxytech.it Operator 5.11.13 Temperature 25.00 °C Humidity 60.00 % Notes Line
90°
C Halfplanes
270.0 180.0
15°
30°
Page 1
Luminaire Code 822232 Name 822232 Measurem. Code PALAZZOLI 910-QL14-S21 822232 Name 822232
Luminaire Code 822231 Name 822231 Measurem. Code PALAZZOLI 910-QL14-S25 822231 Name 822231 Luminaire Flux
1917.97 lm
Lamps Flux
3024.00 lm
Luminaire Power Maximum value
33.00 W 188.30 cd/klm
Luminaire Flux Efficiency
58.12 lm/W
Position
C=0.00 G=35.00
Width Width
190 mm 190 mm
13190.62 lm 63.43%
Lamps 3631.88 lm CG Flux Double Symmetrical
1114.00 cd/klm
Position
C=0.00 G=25.00
Width Width
190 mm 190 mm
363.19%
CG Double Symmetrical
Emitting area on Plane 180° Emitting area on Plane 270° Glare area at 76°
0.001300 m2 0.000190 m2 0.061016 m2
CG 13-01-2015 0.00
Symmetry Type Maximum Gamma Angle Measurement Flux
Coordinate system Double Symmetrical 90Date Measurement Distance 3024.00 lm
CG 12-01-2015 0.00
Symmetry Type Maximum Gamma Angle Measurement Flux
Double Symmetrical 90 3631.88 lm
7.21.24 25.00 °C 60.00 %
Source voltage Source current Photocell
5.11.13 25.00 °C 60.00 %
Source voltage Source current Photocell
Coordinate system Date Measurement Distance Operator Temperature Humidity Notes
Height Height
95 mm 1 mm
Made in an accredited laboratory conforming to UNI EN 13032-1-4 and IES LM 79-08 Standards
Line
Operator Temperature Humidity Notes
Luminaire Lamps Name 1X36W OSRAM - 33.00 W
Code 1X36W OSRAM
FLUORESCENT
42 77 97 100 63 0.63 E
Line Pow. [W] 33.00
Flux [lm] 3024.00
D DIN 5040 B NBN
A30 BZ 5
Luminaire Lamps Name 2X36W/840 OSRAM - 64.00 W
Code 2X36W/840 OSRAM
Q.ty 1
C.I.E. F UTE
44 79 97 100 363 3.63 E
Flux [lm] 3631.88
D DIN 5040 B NBN
Pow. [W] 64.00
Q.ty 1
A30 BZ 5 / 2.5 / BZ 4
1300mm x 190mm
1300mm x 190mm 90
Gamma Angles
90
180°
Gamma Angles
120°
180°
120°
0
0 50
105°
180
180
250
105°
105°
105°
270
270 90°
90°
90°
90°
C Halfplanes
C Halfplanes 180.0
0.0
270.0
90.0
180.0 50
75°
Luminaire Code 820131 Name ULOR 820131 0.00 % Measurem. DLOR PALAZZOLI 63.43910-QL14-S32 % Code 820131 Name 820131 0.00 % RN
Luminaire Flux
1060.37 lm
Lamps Flux
1229.17 lm
200 18.00 W
Maximum value Length Length
Horizontal Luminous Area Emitting area on Plane 0° Emitting area on Plane 90°
0.133000 m2 0.000700 m2 0.000190 m2
30°
302.91 cd/klm 700 mm 700 mm
15°
Efficacy
58.91 lm/W
Position
Luminaire Efficiency Flux
C=2.50 G=22.50
0°
60°
60°
190 mm 190 mm
86.27% 4323.98 lm
15°
Symmetry Type Maximum Gamma Angle Measurement Flux
6.19.35 25.00 °C 60.00 %
0.000700 Horizontal m2Luminous Area 0.000190 Emittingm2 area on Plane 0° 0.032855 Emittingm2 area on Plane 90°
0.247000 m2 0.001300 m2 0.000190 m2
246.17 cd/klm 1300 mm 1300 mm
30°
15°
1.11.59 25.00 °C 60.00 %
Line Pow. [W] 18.00
A30 BZ 4
Q.ty 1
C.I.E. F UTE
700mm x 190mm
Efficacy
68.63 lm/W
Position
Efficiency Luminaire Flux
C=0.00 G=25.00
1250
Width Width
190 mm 190 mm
Gamma Angles
70
105°
0.247000 m2 0.001300 m2 0.000190 m2
Emitting area on Plane 180° Emitting area on Plane 270° Glare area at 76°
0.001300 m2 0.000190 m2 0.061016 m2
CG 14-01-2015 0.00
Symmetry Type Maximum Gamma Angle Measurement Flux
Asymmetrical 90 3024.00 lm
3.53.02 25.00 °C 60.00 %
Source voltage Source current Photocell
Operator Temperature Humidity Notes Flux [lm] 6002.00
Gamma Angles
90.0
50
105°
Luminaire Code 822962 Name 822962 Measurem. ULOR 0.00 %910-QL14-S23 822962 Code PALAZZOLI 45° Name 822962 DLOR 86.27 %
RN Luminaire Flux 0.00 % 5715.32 lm
Luminaire Power
9468.00 lm
Maximum value Length Length
Horizontal Luminous Area Emitting area on Plane 0° Emitting area on Plane 90°
0.24700030° m2 0.001300 m2 0.000190 m2
103.00 W 186.10 cd/klm
1300 mm 1300 mm
Efficacy Position Width Width
15°
280
75° 90.0
75°
60°
60°
Luminaire Code 910-QL14-S22 Name PALAZZOLI 910-QL14-S22 820962 Measurem. ULOR PALAZZOLI 0.00 91 % Code 45° Name PALAZZOLI 910-QL14-S22 820962 DLOR 72.04 %
210
Rectangular Luminaire Rectangular Luminous Area
Luminaire Flux RN Efficiency
55.49 lm/W C=0.00 G=25.00
7194.48 lm 0.00 %60.36%
Operator Temperature Humidity Notes
0° on Plane 180° 15° Emitting area Emitting area on Plane 270° Glare area at 76°
Line
Source voltage Source current Photocell
Code 2X54W RADIUM
Luminaire Lamps Name 2X54W RADIUM - 103.00 W
44 79 97 100 60 0.60 E
A30 BZ 5 / 2 / BZ 4
180.0
150
Maximum value
Horizontalm2 Luminous Area 30° 0.001300 Emitting area 0.000190 m2 on Plane 0° Emitting area 0.061016 m2 on Plane 90°
0.247000 30° m2 0.001300 m2 0.000190 m2
103.00 W 267.16 cd/klm
1300 mm 1300 mm
200
Efficacy Position
RNEfficiency Luminaire Flux
C=0.00 G=25.00
Width Width
15°
69.85 lm/W
Gamma Angles
Emitting area 0°on Plane 180° Emitting area on Plane 270° Glare area at 76°
15°
Q.ty 1
Symmetry Type Maximum Gamma Angle Measurement Flux
40
180
D DIN 5040 B NBN
Flux [lm] 9468.00
Gamma Angles
40
0°
0.0 75°
60°
60°
45°
45°
ULOR
0.00 %
DLOR
75.99 %
RN
0.00 %
Pow. [W] 103.00
Q.ty 1
90
Code 1x36w osram
CG Asymmetrical Height Height
0°on Plane 180° Emitting area Emitting area on Plane 270° Glare area at 76°
Luminaire Lamps Name 1x36w osram - 35.00 W
15°
cd/klm95 mm 1 mm
0.001300 m230° 0.000190 m2 0.061016 m2 Asymmetrical 90 3024.00 lm
Flux [lm] 3024.00
D DIN 5040 B NBN
120°
Gamma Angles
105°
180
180.0
60
Page 1
Pow. [W] 35.00
Q.ty 1
A30 BZ 5 / 2.5 / BZ 4
180°
120°
70
105°
105°
90°
90°
0.0 75°
270.0
120
70
75°
90.0
60°
ULOR
0.00 %
DLOR
80.43 %
RN
0.00 %
140
60°
15°
0°
45°
15°
45° 280
LITESTAR
cd/klm
350
30°
14 - T5 - 2 tubes - Symmetrical
(c)OxyTech SrlPage www.oxytech.it 1
60°
45°
cd/klm
300 30°
75°
210
240
30°
LITESTAR
C=2.50 G=27.50 190 mm
350190 mm
Source voltage Source current Photocell
43 79 97 100 80 0.80 E
90°
cd/klm
13 - T5 - 2 tubes - White reflector
(c)OxyTech Srl www.oxytech.it
80.43%
C Halfplanes
75°90.0
15°
Efficiency
Symmetry Type Maximum Gamma Angle Measurement Flux
3.53.02 25.00 °C 60.00 %
90°
270.0
200 15°
15°
180
160
Position Width Width
69.49 lm/W
12 - T8 - 1 tube - Asymmetrical
C.I.E. F UTE
60
120
45°
30°
346.50 cd/klm 1300 mm 1300 mm
280
Efficacy
270
180.0
80
60°
0.00 %
0.247000 30° m2 0.001300 m2 0.000190 m2
180°
105°
90°
75°
Maximum value
0.001300 m2Luminous 30° Horizontal Area 0.000190 Emitting m2 area on Plane 0° 0.061016 Emitting m2 area on Plane 90°
C Halfplanes
90.0
45° 35.00 W
0
105°
90°
0.0
210
Length Length
Line
A30 BZ 5 / 0.8 / BZ 4
60°
45° Luminaire Power
3024.00 lm
75°
140
Height 95 mm Rectangular Luminaire cd/klm Height 1 mm Area Rectangular Luminous
270
C Halfplanes
60.36 %
0.00 %75.99% 2432.14 lm
70
1300mm x 190mm
270
270.0
60°
0 105°
180.0
60°
Operator Temperature Humidity Notes
Luminaire Lamps Code Name 910-QL14-S22 2X54W RADIU 910-QL14-S22 2X54W RADIU - 103.00 W
120°
0 180
90°
Asymmetrical Coordinate system CG 90Date 14-01-2015 9468.00 lm Measurement Distance 0.00 Page 1 LITESTAR (c)OxyTech Srl www.oxytech.it
Source voltage Source current Photocell
47 83 98 100 76 0.76 E
90
180°
75°
CG Flux Asymmetrical Lamps
190 mm
250190 mm
1300mm x 190mm
90
105°
90°
75°90.0
11 - T8 - 2 tubes - Symmetrical
Pow. [W] 103.00
120°
70
105°
Luminaire Code 824231 Name 824231 Measurem. ULOR PALAZZOLI 0.00 910-QL14-S27 % Code 824231 45° Name DLOR 82423180.43 %
45°
Length Length
C.I.E. F UTE
Q.ty 1
180°
0.0
270.0
100
Rectangular Luminaire Height 95 mm cd/klm Rectangular Luminous Height 1 mm Area
Flux [lm] Line 9468.00
D DIN 5040 B NBN
1300mm x 190mm
RN
105°
180
50
Coordinate system CG Double Symmetrical Date 13-01-2015 90 Measurement Distance 0.00 9468.00 lm LITESTAR (c)OxyTech Srl Page www.oxytech.it 1 Operator 0.54.23 Temperature 25.00 °C Humidity 60.00 % Notes
Symmetry Type Maximum Gamma Angle Measurement Flux
2.28.25 25.00 °C 60.00 %
DLOR
Gamma Angles
90°
Luminaire Power
Lamps 9468.00 lm CGFlux Double Symmetrical
190 mm
350 190 mm
10 - T8 - 1 tube - Symmetrical
Coordinate system CG Date 13-01-2015 Measurement Distance 0.00 ITESTAR (c)OxyTech Srl www.oxytech.it
0.00 %
120°
90°
0.0
270.0
140
60°
Pow. [W] 35.00
A30 BZ 5 / 2.5 / BZ 4
C Halfplanes
180.0
70
Flux [lm] 3024.00
D DIN 5040 B NBN
270
90°
75°
Luminaire Lamps Name 1x36w osram - 35.00 W
Code 1x36w osram
43 79 97 100 80 0.80 E
90
180°
C Halfplanes 0.0
ULOR
Q.ty 1
C.I.E. F UTE
95 mm 1 mm
0
105°
90°
Lamps Flux
Pow. [W] 63.00
Line
A30 BZ 5 / 0.8 / BZ 4
270
270.0
80.43%
CG Asymmetrical Height Height
Double Symmetrical Coordinate system Page 1 90Date 6002.00 lm Measurement Distance
15°
1300 mm 1300 mm
1300mm x 190mm
270
180.0
Efficiency
C=2.50 G=27.50 190 mm 190 mm
0.001300 m2Luminous Area Horizontal 0.000190 Emitting m2 area on Plane 0° 0.061016 Emitting m2 area on Plane 90°
D DIN 5040 B NBN
120°
180
C Halfplanes
69.49 lm/W
Position
Symmetry Type Maximum Gamma Angle Measurement Flux
0°
0
0
Efficacy
Width Width
Emitting area on Plane 180° Emitting area on Plane 270° Glare area at 76°
Luminaire Lamps Name 2X36W OSRAM - 63.00 W
Code 2X36W OSRAM
35.00 W 346.50 cd/klm
Length Length
Source voltage Source current Photocell
47 82 97 100 72 0.72 F
90
180°
Luminaire Power Maximum value
cd/klm
Height 95 mm Rectangular Luminaire Height 1 mm Area Rectangular30° Luminous
1300mm x 190mm
90
72.04% 2432.14 lm
CG Flux Double Symmetrical Lamps 3024.00 lm
9 - T8 - 2 tubes - White reflector
Operator Temperature Humidity Notes Flux [lm] 1229.17
D DIN 5040 B NBN
63.00 W
Double Coordinate Symmetrical system CG LITESTAR (c)OxyTech Srl www.oxytech.it Page 1 90Date 14-01-2015 1229.17 Measurement lm Distance 0.00
Luminaire Lamps Name 1X T8 L18W/827
Code 1X T8 L18W/827
Luminaire Code 824231 Name 824231 45° Measurem. Code PALAZZOLI 910-QL14-S27 824231 Name 824231
1000
Length Length
Source voltage Source current Photocell
48 82 98 100 86 0.86 E
60°
45°
Height Rectangular Luminaire 95 mm Height Rectangular Luminous 1 mm Area 30°
8 - T8 - 1 tube - White reflector
Operator Temperature Humidity Notes
75°
500
Maximum value
cd/klm
Emitting area on Plane 180° Emitting area on Plane 270° Glare area at 76°
Coordinate system CG LITESTAR (c)OxyTech Srl www.oxytech.it 27-01-2015 Date Measurement Distance 0.00
250
Luminaire Power
Lamps CG Flux Double Symmetrical 6002.00 lm
250
Width Width
75°
Luminaire Code 820232 ULOR 820232 0.00 % Name 45° Measurem. DLOR 363.19 % Code PALAZZOLI 910-QL14-S26 820232 Name 820232 0.00 % RN
45°
Luminaire Power
75° 90.0
750
150
Rectangular Luminaire Rectangular Luminous Area
Line
0.0
270.0
100
60°
ITESTAR
Maximum value
1300 mm 1300 mm
Efficiency
0.247000 m2 0.001300 m2 0.000190 m2
1300 mm 1300 mm
LUX
PHOTOMETRIC CURVES
206.10 lm/W
Horizontal 0.001300 m2Luminous Area Emittingm2 area on Plane 0° 0.000190 Emittingm2 area on Plane 90° 0.061016
0.247000 m2 0.001300 m2 0.000190 m2
C.I.E. F UTE
Efficacy
Emitting area on Plane 180° Emitting area on Plane 270° Glare area at 76°
Horizontal Luminous Area Emitting area on Plane 0° Emitting area on Plane 90°
180
64.00 W
Length Length
Length Length
C.I.E. F UTE
Luminaire Power
Rectangular Luminaire Height 95 mm Rectangular Luminous Height 1 mm Area
Rectangular Luminaire Rectangular Luminous Area
C.I.E. F UTE
Efficacy
30°
15°
0°
15°
30°
15 - T5 - 1 tube - Asymmetrical
Page 1 (c)OxyTech Srl www.oxytech.it
Page 1
47
RINO series
Ø20.6
Steel lighting fixture
110
Lighting fixture type
18W T8 - 24W T5 - LED 36W T8 - 28W and 54W T5 - LED 58W T8 - 35W and 49W and 80W T5- LED
A
200
Ø20.6
B
110
Oval and round bulkhead fixtures in aluminium alloy A
200
B
E B 6
Wattage (W)
A (mm)
B (mm)
18 28 53
199 226 295
119 122 142
C D (mm) (mm) 100 105 127
F
48
184 210 278
E (mm)
F (mm)
112 130 170
42 42 52
G
M20x1,5
D
A
C
H
H
A (mm)
B (mm)
690 480 1300 1090 1600 1395
52
A B
E
A
B
B
A (mm)
R (mm)
C (mm)
D (mm)
E (mm)
811071 811171 811271
86 105 125
57 71 89
175 192 231
195 207 251
35 43 49
35°
Lighting fixtures in aluminium alloy for ceiling mounting Ø6
E
F
E
Code
A (mm)
B (mm)
D (mm)
F (mm)
E (mm)
813071 813171 813271
225 246 284
209 230 263
163 183 214
177 197 233
35 43 49
Reflectors for lighting fixtures
C
B
35°
F
35°
D
C
D
Code
35°
F
D
C
D
B
E
D
C
C
A
LUX
Angled lighting fixtures in aluminium alloy A
R
E
E
F
90° angled lighting fixtures in aluminium alloy
A
D
A
38
D
EE 52
D
R
RA A
38
DIMENSIONS 38
RINO series R
52
38 38 38
90
184
200
38 38
52
B
D
B
A
D
C
D
A
D
C
Ø6
C
Ø6
A
E
B C
D
D
Type
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
60W 100W 200W
106 134 170
245 275 325
180 200 245
200 220 265
108 135 172
113 140 177
E
A
F
F
F
A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
819030 819130 819230
245 275 325
124 155 196
6 7 7
34 42 42
90 116 150
7,5 8 8
B
E
Code
F
F
A
F
C
E
D
C
D
C
Ø6
B
B B
A
A F
E
A
F
TUNNEL54 series E
E
Tunnel lighting fixtures E POWER SUPPLY COMPARTMENT OPTIC COMPARTMENT
SECONDARY POWER SUPPLY COMPARTMENT
MAIN POWER SUPPLY COMPARTMENT
OPTIC COMPARTMENT
Non – dimmered
Reverberi or Umpi
No. Led
Rated flux (lm)
Power (W)
A1
A2
O
L
A1
A2
O
L
Weight (Kg)
4 6 8 12 18 24 30 36 42 48 54
4160 6240 8320 12480 18720 24960 31200 37440 43680 49920 56160
34 51 68 103 154 205 257 308 359 410 462
100 200 200 270 270 270 270 270 270 270 270
270 270 270
165 171 250 251 330 410 489 569 648 728 807
278 384 463 534 613 693 772 852 1201 1281 1360
180 200 200 270 270 300 300 300 270 270 270
270 270 270
165 171 250 251 330 410 489 569 648 728 807
385 384 463 534 613 723 802 1122 1201 1281 1360
4,8 5,4 6,0 6,5 7,0 11,3 12,0 13,0 15,5 16,0 16,5
49
NAUTILUX series Oval bulkhead fixtures in brass C
Well glass fixtures in brass 112
A
155
B
Ø130
380
70
Ø6
156
Code
A (mm)
B (mm)
C Weight (mm) (kg)
860100 - 861100 860200 - 861200 860211 - 861211
130 170 170
226 295 295
105 127 135
Code
Weight (kg)
Code
Weight (kg)
860140
2,5
861140
2,5
Well glass fixtures in aluminium alloy
Large fixtures
35
Suspended fixtures
2,0 3,5 5,0
230
C
40
Ø130
340
150
280
M24x1,5
Ø530
A
315
Code
Weight (kg)
Code
Weight (kg)
Code
A (mm)
B (mm)
C Weight (mm) (kg)
861507 861508
3,4 4,2
860240
10,1
816071 816171 816271
126 157 194
195 200 230
320 340 380
Plates in steel
147 7
36 135
860990
Ø6
124
860900
27
142
120°
51
48,5
0°
12
3
5
130,5
50
B
1,4 2,0 2,9
LUX
SEQUENTIAL INDEX Palazzoli code
Catalogue Marks Pack Q.ty page 1
151910
1
Palazzoli code
Catalogue Marks Pack Q.ty page
Palazzoli code
Catalogue Marks Pack Q.ty page
Palazzoli code
Catalogue Marks Pack Q.ty page
Palazzoli code
Catalogue Marks Pack Q.ty page
813171
8
1
23
822140
1
9
841171
1
39
849562
1
41
36
813200
8
2
24
822142
1
9
841243
1
39
850061
1
25
151911
1
36
813271
8
1
23
822211
8
1
13
841273
1
39
850062
1
25
151912
1
36
814052
8
1
23
822231
8
1
13
841411
1
41
850063
1
25
8
1
13
841462
1
41
850064
1
25
1
9
841562
1
41
850172
1
25
1
25
151913
1
36
816071
1
43
822232
151914
1
36
816171
1
43
822240
151915
1
36
816271
1
43
822242
1
9
842132
1
16
859400
151920
1
36
819012
8
1
25
822311
8
1
13
842140
1
10
859412
151921
1
36
819015
8
1
25
822331
8
1
13
842142
1
10
860100
8
1
13
842232
1
9
842240
151922
1
36
819017
8
1
25
822332
151923
1
36
819018
8
1
25
822340
151924
1
36
819019
8
1
25
822342
1
9
842242
151925
1
36
819020
8
1
25
822762
8
1
13
842332
8
8
8
8
1
20
1
44
1
16
860140
1
45
1
10
860200
1
44
1
10
860211
1
44
1
16
860240
1
45
152132
1
37
819022
8
1
25
822862
8
1
13
842340
1
10
860900
1
45
152232
1
37
819030
8
5
25
822962
8
1
13
842342
1
10
860990
1
45
152962
1
37
819035
8
1
25
824131
8
1
14
842762
8
1
16
861100
1
43
153132
1
37
819112
8
1
25
824231
8
1
14
842862
8
1
16
861140
1
43
8
153232
1
37
819120
8
1
25
824331
153962
1
37
819130
8
5
25
824561
1
14
842962
8
1
16
861200
1
43
1
14
843111
8
1
16
861211
1
43
154304
1
35
819135
8
1
25
824761
8
1
14
843132
8
1
16
861505
1
44
154306
1
35
819212
8
1
25
824861
8
1
14
843211
8
1
16
861506
1
44
8
154308
1
35
819220
8
1
25
824961
8
1
14
843232
154312
1
35
819230
8
5
25
825111
8
1
15
843240
154404
1
35
819235
8
1
25
825132
8
1
15
843242
154406
1
35
820000
8
1
11-17-31-37
825211
8
1
15
843311
8
8
8
154408
1
35
820001
8
1
11-17-31
825232
154412
1
35
820002
8
1
17-29
825240
8
1
17-29
825242
1
37
825311
8
154418
1
35
820003
154424
1
35
820004
1
15
843332
1
10
843340
1
10
843342
1
15
843462
8
1
16
861507
1
44
1
10
861508
1
44
1
10
861510
1
44
1
16
861550
1
45
1
16
861551
1
45
1
10
878141
1
39
1
10
878142
1
39
1
16
878243
1
39
154430
1
35
820005
1
37
825332
8
1
15
843511
8
1
16
878741
1
40
154436
1
35
820006
1
11-17-31
825562
8
1
15
843562
8
1
16
878742
1
40
1
40-41
825762
8
1
15
843662
8
1
16
879062
1
41
1
17
825962
8
1
15
843711
8
1
16
879462
1
41
8
154442
1
35
820007
154448
1
35
820008
8
154454
1
35
820010
1
29
828132
154606
1
36
820011
1
29
828140
154612
1
36
820016
1
29
828142
154618
1
36
820017
1
29
828232
8
1
15
843762
8
1
16
879562
1
41
1
10
843862
8
1
16
881062
1
41
1
10
843911
8
1
16
881562
1
41
1
15
843962
8
1
16
154624
1
36
820111
8
1
14
828240
1
10
845111
8
1
17
154630
1
36
820131
8
1
14
828242
1
10
845132
8
1
17
820111EX
7
1
31
154636
1
36
820132
8
1
14
828332
8
1
15
845211
8
1
17
820131EX
6-7-9
1
31
154642
1
36
820133
8
1
14
830071
8
1
20
845232
8
1
17
820132EX
6-7-9
1
31
154648
1
36
820151
8
1
14
830072
8
1
20
845240
1
11
820211EX
7
1
31
154654
1
36
820152
8
1
14
831071
8
1
19
845242
1
11
820231EX
6-7-9
1
31
820211
8
1
14
831072
8
1
19
845311
8
1
17
820232EX
6-7-9
1
31
820231
8
1
14
831075
8
1
19
845332
8
1
17
820311EX
7
1
31
8
8EX
810060
8
5
24
820232
8
1
14
831091
8
1
19
845562
8
1
17
820331EX
6-7-9
1
31
810071
8
1
22
820233
8
1
14
831092
8
1
19
845762
8
1
17
820332EX
6-7-9
1
31
810100
8
1
24
820240
1
14
831095
8
1
19
845962
8
1
17
822111EX
7
1
31
810171
8
1
22
820242
1
9
831171
8
1
19
847132
8
1
17
822131EX
6-7-9
1
31
810200
8
2
24
820251
8
1
9
831172
8
1
19
847140
1
11
822132EX
6-7-9
1
31
810271
8
1
22
820252
8
1
14
831175
8
1
19
847142
1
11
822181EX
7-10
1
29
811060
8
5
24
820311
8
1
14
831191
8
1
19
847211
8
1
17
822182EX
7-10
1
29
811071
8
1
23
820331
8
1
14
831192
8
1
19
847232
8
1
17
822211EX
7
1
31
811100
8
1
24
820332
8
1
14
831195
8
1
19
847240
1
11
822231EX
6-7-9
1
31
811171
8
1
23
820340
1
9
831271
8
1
19
847242
1
11
822232EX
6-7-9
1
31
811200
8
2
24
820342
1
9
831272
8
1
19
847332
1
17
822281EX
7-10
1
29
811271
8
1
23
820462
8
1
14
831275
8
1
19
849011
1
41
822282EX
7-10
1
29
812060
8
5
24
820511
8
1
14
831291
8
1
19
849062
1
41
822311EX
7
1
31
812071
8
1
22
820562
8
1
14
831292
8
1
19
849141
1
39
822331EX
6-7-9
1
31
812100
8
5
24
820662
8
1
14
831295
8
1
19
849142
1
39
822332EX
6-7-9
1
31
812171
8
1
22
820711
8
1
14
831914
8
1
19
849171
1
39
830072EX
6-7
1
33
812200
8
2
24
820762
8
1
14
831934
8
1
19
849172
1
39
831072EX
6-7
1
33
812271
8
1
22
820862
8
1
14
831954
8
1
19
849243
1
39
831172EX
6-7
1
33
812988
8
1
22
820911
5
1
14
841011
1
41
849273
1
39
831272EX
6-7
1
33
813060
8
1
24
820962
8
1
14
841062
1
41
849411
1
41
813071
8
1
23
822131
8
1
13
841141
1
39
849462
1
41
813100
8
2
24
822132
8
1
13
841142
1
39
849511
1
41
i IMQ
2=
Mark legend: 1 =
vVDE
3=
R.i.na.
4 = M.M.I.
5=
ENEC
6 = TUV EX
7 = EX
8=
8 3-8
UKR
9 = EXAGENCIJA IECEX
10 = CESI EX
51
EXPO 2015 - ALBERO DELLA VITA
EXPO 2015 - MERLATA TUNNEL
52
REFERENCES
LUX
GRIMALDI MOTORBOATS
DANONE S.P.A. FACTORY
53
NOTES
54
SALE CONDITIONS
PALAZZOLI S.p.A. ELECTROTECHNIC INDUSTRY 25128 BRESCIA - ITALY - Via F. Palazzoli, 31 tel. +39 030.2015.1 fax +39 030.2015.258 http://www.palazzoli.com E-mail:
[email protected]
LUX
Fully p.u. capital 5.096.000 Euro i.v. Fiscal code 04452750484 VAT code 03316260177 Brescia Chamber of C. N. 356562 Reg. Brescia Court N. 04452750484 Data code BS 058237
(Registered in Brescia 6 March 1956, N. 9907, Mod. 2, Vol. 359, Private Acts) OFFERS - ESTIMATES - DESIGNS
1 - Prices and terms are binding only at the moment we accept the order with written confirmation. 2 - The terms and other commitments taken on by us with the offer are only valid if the order extends to everything that is included in the offer. 3 - Estimates, general projects, etc. attached to the offer are our exclusive property and thus may not be disclosed to others without our written approval. 4 - Any alteration to the offer and to these general supply terms must be in writing and limited to what has been explicitly agreed. WEIGHTS - DIMENSIONS - TECHNICAL DATA 5 - Estimates, plans, drawings and technical data given in the catalogues, price lists and offers are only approximate until such time as they are confirmed or replaced by definitive data, total or partial, at the moment of ordering. PRICES 6 - The prices and discounts in the price lists and offers may be subject to change depending on the requirements of the market or relating to variations in the costs of raw materials or manpower, without prior notice to customers. The prices given are ex-factory; transport, customs, duties, and rights of any nature are always to the customer’s charge, unless otherwise agreed in writing. PACKING AND TRANSPORT 7 - Returns are not accepted on packing. Under no circumstance, our company can be held liable for failed or irregular deliveries by carriers, and it is to be expressly understood that goods, even where, by special agreement, they are sold with free delivery or delivered to the customer’s domicile, will always travel at the buyer’s full risk. Any return of goods must be authorised beforehand by our company and arrive free of all expense in the warehouse of our factory. DELIVERY TERMS 8 - The delivery terms agreed on are approximate and not binding and, under the clause “providing unsold” for goods signalled as being ready, it is intended to be valid only in normal work and supply conditions. In no circumstance and for no reason will our company be held liable to make a reimbursement for any direct or indirect damage due to delays in delivery. PAYMENT 9 - The payment conditions must be agreed in writing or, otherwise, they are understood to be for the net amount in cash at the moment of delivery of the goods. In the case of delayed payment, the customer undertakes to pay interest at an average market rate applied by the Bank, increased by 4%. If the buyer does not comply with, even only partly, any of the agreed conditions for collecting the goods or for the regular payment of single invoices, our company has the option of immediately interrupting further deliveries and to consider itself released from any contractual commitment, but maintaining all rights regarding the buyer’s failure to comply with the contract. Unless otherwise expressly agreed, payments must always be made directly to our company. CLAIMS 10 - Any claims regarding goods supplied must reach us within 12 days of delivery of the same, after which time they will not be accepted. Any claim must be based on firm data in order to be taken into consideration. We reserve the option of taking back or replacing goods that the customer demonstrates to us to be defective, but we will not acknowledge any payment made for repairs or exchange which have been done without our authorisation. It is to remain understood that any claims put forward on single parts of the order will not affect the rest of the order or undertaking, nor the payment for goods received without objection. WARRANTIES 11 - The warranties that we adopt for material manufactured by us will last 12 months from the date of the invoice concerned. It is understood that, during this period, we undertake to repair or replace free of charge in our workshop those parts or fixtures which, by defect in manufacture or materials, are seen to be unusable. Nonetheless, we reserve the right to decide in our sole opinion, if it is better to repair or to replace them. We shall not send our staff on site for inspection purposes of places where our equipment has been used in systems, apart from those cases where it is necessary to check the operating conditions to which our equipment has been subject. 12 - Our warranty has natural effect only if the apparatus has been perfectly installed and managed, they have not been tampered with or modified, and all the technical regulations contained in our catalogues and instruction sheets have been followed. The warranty does not cover those items which, by the nature of the material of which the items are made or due to their specific use, are subject to earlyar, and in the same way, breakdowns due to normal wear and tear are excluded. 13 - The customer must give written notice of faults and defects detected, with a precise report on their nature. We undertake to repair or replace the item, within a reasonable period, as per the above mentioned circumstances and terms. Material to repair or replace must be returned to us free of charge. 14 - Our company, with the repair or replacement of items or parts which were defective, is to be considered released of all further liability. Moreover, the customer must, by way of this, consider himself satisfied and waive any request for damages and expenses. In particular cases we may permit the customer to provide for repair or replacement himself, with our only obligation being to reimburse the out-of-pocket expenses acknowledged as being essential for putting our equipment into working condition. 15 - If there should be a dispute of a technical nature, the parties will obtain the opinion of an inspector to be nominated by agreement or, if there is a dispute over the nomination, then the person will be appointed by the presiding judge of Brescia Court. 16 - We will not accept any costs that the buyer has incurred, not even during the warranty period, without our prior written agreement. 17 - Our company reserves the right to use, in the manufacture of its equipment, any material that it deems suitable and to make any changes in shape, weight or dimensions in its products that it feel appropriate. DISPUTES 18 - The contracts, even if stipulated with foreign companies or persons or for material supplied abroad, are governed by current Italian law. The competent court will only be that of Brescia notwithstanding articles 31 (et seq.) of the Italian Civil Procedure Code, thereby excluding the customer possibility of having recouse to Judicial Authorities of any other place, even for investigations or in any connection with the case, but permitting the supplying company the option of taking legal proceedings, as a plaintiff, in the customer place of residence, in Italy or abroad. 19 - Any disputes do not release the customer from complying with the payment terms and do not imply any extension to the times agreed.
Palazzoli reserves the right to modify or improve the product at any time without prior notice.
All rights reserved in all countries, in particular the right to translate, to store electronically, to reproduce or to adapt totally or partially. No liability will be assumed for any damages that may arise from the use of this data. © PALAZZOLI S.p.A. 25128 BRESCIA - ITALY - Via F. Palazzoli, 31
55
LIGHTING SOLUTIONS LED lighting fixtures
INDUSTRY
Fluorescent lighting fixtures
Oval, Round and Well glass fixtures
Zone 1, 2, 21 and 22
ATEX
Zone 2, 21 and 22
Zone 2, 21 and 22
LED tunnel lighting fixture permanent
TUNNEL
LED tunnel lighting fixture reinforcing
Fluorescent lighting fixtures
LED lighting fixtures
MARINE
ARCHITECTURAL
Oval, Well glass and Suspended fixtures
Palazzoli S.p.A. Via F. Palazzoli, 31 - 25128 Brescia - Italy - Tel. +39 030 2015.1 - Fax +39 030 2015.258 - www.palazzoli.com -
[email protected]
55573E EDITION 2016
Fluorescent lighting fixtures