Light sources November 2004
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
CML Innovative Technologies is leading in innovative lighting solutions ; our 1800 employees are specifically dedicated to the design, production and distribution of miniature light sources and miniature lighting systems. Our worldwide operations and know-how allow us to continually exceed our customers requirements.
CML Innovative Technologies est leader en solutions innovantes d’éclairage ; nos 1800 collaborateurs sont dédiés à la conception, la production et la distribution de sources et de systèmes lumineux. Notre savoir-faire et nos implantations mondiales nous permettent de mieux servir nos clients et de répondre aux niveaux d’exigences les plus élevées.
CML Innovative Technologies ist der führende Hersteller für innovative Beleuchtung ; unsere 1800 Mitarbeiter engagieren sich für die Entwicklung, die Produktion und den Vertrieb von Beleuchtungsquellen und –Systemen. Unsere Erfahrung und unsere weltweiten Standorte machen es möglich, unseren Kundenservice stets zu verbessern und auch für die höchsten Ansprüche eine optimale Lösung zu finden.
2
Automotive LEDs
4-5
CCFLs
6-9
Incandescent Lamps
10 - 17
Socketed Lamps
18 - 20
Lampholders
21 - 23
Aviation Lamps
24 - 25
Aviation Fluorescent Lamps
26
Automotive LEDs
4–5
PLCC2 LEDs PLCC4 Power LEDs
4 5
CCLFs
6–9
Technical Notes 1,8mm & 2mm CCFLs 2,6mm CCFLs 4,1mm CCFLs Electronic Ballasts
6 7 8 9 9
Incandescent Lamps
10 – 17
Technical Notes T11/2 Wedge Base Lamp (5mm) T13/4 Wedge Base Lamp (5,6mm) T31/4 Wedge Base Lamp (10mm) T5 Wedge Base Lamp (15mm) T61/3 Single Filament Wedge Base Lamp (20mm) G31/2 Bayonet (MCC) Lamp (11mm) G31/2 Miniature Screw (MES) Lamp (11mm) T31/4 Bayonet (MCC) Lamp (T10x28) T31/4 Miniature Screw (MES) Lamp (T10x28) T31/4 Bayonet (MCC) Lamp (T10x30) T31/4 Miniature Screw (MES) Lamp (T10x30)
10 – 12 13 13 14 14 14 15 15 16 16 17 17
Socketed Lamps
18 - 20
PC Board Lamps EBS PC Board Lamps PC PC Board Lamps SMD PC Board Lamps KW
18 19 20 20
Lampholders
21 - 23
Technical Notes P21 Lampholder (21 Watts) T11/2 Lampholder Wedge Base (5mm) T13/4 Lampholder Wedge Base (5,6mm) T31/4 Lampholder Wedge Base (10mm) T15 Lampholder Wedge Base
21 22 22 22 23 23
Aviation Lamps
24 – 26
Aviation Halogen Aircraft Lamp Aviation Anti-Collision Warning Lamp Aviation Xenon Flashtube Aviation Incandescent Aircraft Lamp Aviation Fluorescent Lamp
24 24 24 25 26
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
3
PLCC2 LEDs Industry Standard PLCC SMT package High brightness using AlInGaP and InGaN dice technologies Broad range of colors: Red, Red-Orange, Orange, Amber, Yellow-Green, Emerald Green, Green, Cyan and Blue
Part Number
4
PLCC4 LEDs
AUTOMOTIVE APPLICATIONS ONLY
Colour
Super wide viewing angle at 120° High volume, high reliability Compatible with both IR and TTW soldering process Black reflector surface option High brightness performance
Dice Technology
Dominant Wavelength �D (nm)
Viewing Angle 2�1/2 (°)
Luminous Intensity, If @ 20mA Min (mcd)
Typ (mcd)
Vf @ 20mA Typical (V)
HSMS-A100-J00J1
Red
GaP
626
120
4
15
2,2
HSMS-A100-L00J1
Red
GaP
626
120
10
15
2,2
AUTOMOTIVE APPLICATIONS ONLY
Industry-standard PLCC4 package (Plastic Leaded Chip Carrier) High reliability LED package (Automotive Grade) EIA-compliant tape & reel High brightness using AlInGaP and InGaN dice technologies Dice material Color Flexibility Part Number
Available in full selection of colors Super wide viewing angle at 120° High intensity in miniature package size Industry standard, ease of manufacturing Styling flexibility Space saving Product Customization : subject to feasibility, we are flexible in supporting Luminous Intensity
Colour
Dice Technology
Dominant Wavelength D (nm)
Viewing Angle 21/2 (°)
Min (mcd)
Max (mcd)
Vf Typical (V)
HSMH-A100-L00J1
Red
AlGaAs
637
120
10
15
1,9
HSMH-A100-N00J1
Red
AlGaAs
637
120
25
50
1,9
HSMC-A100-J00J1
Red
AllnGaP
626
120
4
100
1,9
HSMC-A100-Q00J1
Red
AllnGaP
626
120
63
100
1,9
HSMC-A400-S30M1
Red
AllnGaP
626
120
160
400
2,2
If @ 50mA, Vf @ 50mA
HSMC-A100-R00J1
Red
AllnGaP
626
120
100
140
1,9
HSMC-A401-T40M1
Red
AllnGaP
626
120
250
800
2,2
HSMC-A101-S00J1
Red
AllnGaP
626
120
160
220
1,9
HSMZ-A100-T00J1
Red
AllnGaP
630
120
250
350
2,2
HSMC-A401-T80M1
Red
AllnGaP
626
120
310
1000
2,2
HSMJ-A100-Q00J1
Red Orange
AllnGaP
615
120
63
100
1,9
HSMZ-A400-U80M1
Red
AllnGaP
630
120
500
1600
2,8
HSMJ-A101-S00J1
Red Orange
AllnGaP
615
120
160
200
1,9
HSMJ-A401-T40M1
Red Orange
AllnGaP
615
120
250
800
2,2
HSMV-A100-T00J1
Red Orange
AllnGaP
617
120
250
350
2,2
HSMD-A100-J00J1
Orange
GaP
602
120
4
15
2,2
HSMJ-A401-U40M1
Red Orange
AllnGaP
615
120
400
1260
2,2
HSMD-A100-L00J1
Orange
GaP
602
120
10
15
2,2
HSMV-A400-U80M1
Red Orange
AllnGaP
617
120
500
1600
2,8
HSML-A100-Q00J1
Orange
AllnGaP
605
120
63
100
1,9
HSML-A401-U40M1
Orange
AllnGaP
605
120
400
1260
2,2
HSML-A101-S00J1
Orange
AllnGaP
605
120
160
220
1,9
HSMY-A100-J00J1
Yellow Amber
GaP
585
120
4
12
2,2
HSMA-A400-T35M1
Amber
AllnGaP
590
120
250
630
2,2
HSMY-A100-L00J1
Yellow Amber
GaP
585
120
10
12
2,2
HSMA-A401-U45M1
Amber
AllnGaP
590
120
400
1260
2,2
HSMA-A100-Q00J1
Yellow Amber
AllnGaP
590
120
63
100
1,9
HSMU-A400-U85M1
Amber
AllnGaP
592
120
500
1600
2,8
HSMA-A101-S00J1
Yellow Amber
AllnGaP
590
120
160
220
1,9
HSMU-A100-S00J1
Yellow Amber
AllnGaP
592
120
160
320
2,2
HSME-A401-P4PM1
Emerald Green
AllnGaP
567
120
40
130
2,2
HSMG-A100-J02J1
Yellow Green
GaP
569
120
4
18
2,2
If @ 30mA, Vf @ 30mA
HSME-A100-M02J1
Yellow Green
AllnGaP
576
120
16
70
1,9
HSMM-A401-R7YM2
Green
InGaN
525
120
120
320
3,8
HSMG-A100-H01J1
Emerald Green
GaP
560
120
2,5
8
2,2
HSME-A100-L01J1
Emerald Green
AllnGaP
567
120
10
40
1,9
HSMM-A401-S4YM2
Green
InGaN
525
120
160
500
3,8
HSMM-A101-R00J1
Green
InGaN
525
120
100
200
3,4
HSMM-A401-S7YM2
Green
InGaN
525
120
200
500
3,8
HSMM-A100-S00J1
Green
InGaN
525
120
160
350
3,4
HSMK-A101-R00J1
Cyan
InGaN
505
120
100
170
3,4
HSMM-A400-T8YM2
Green
InGaN
525
120
310
1000
3,8
HSMK-A100-S00J1
Cyan
InGaN
505
120
160
280
3,4
HSMK-A401-R40M2
Cyan
InGaN
505
120
100
320
3,8
HSMB-A100-J00J1
Blue
GaN
462
120
4
15
3,9
HSMK-A400-T80M2
Cyan
InGaN
505
120
310
1000
3,8
HSMN-A101-N00J1
Blue
InGaN
470
120
25
50
3,4
HSMN-A100-P00J1
Blue
InGaN
470
120
40
70
3,4
HSMN-A401-P4QM2
Blue
InGaN
470
120
40
130
3,8
HSMN-A401-P7QM2
Blue
InGaN
470
120
50
130
3,8
HSMN-A400-Q8QM2
Blue
InGaN
470
120
80
250
3,8
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
5
CCFLs
CCFLs
TECHNICAL NOTES
1,8mm & 2,0mm CCFLs Diameter: Current: Surface Brightness: Life Hours: CIE Colour:
Operation: Cold cathode lamps operate by the principle of gas-discharge illumination. The electrodes inside each end of the CCFL create electron emission when connected to the matched electronic ballast unit. In turn the electron emission causes the Argon/Neon gas-filling to become ionized resulting in discharge glow. The discharge glow reacts with the phosphor coating inside the CCFL glass resulting in visible light. Features:
Part Number
Overall Length
Active Length
Voltage
Watts
CCFL18220 CCFL18250 CCFL18280
220 250 280
205 235 265
540 600 660
2,7 3,0 3,3
Diameter: Current: Surface Brightness: Life Hours: CIE Colour:
Cool Running ~ CCFLs generate very little heat. Long Life ~ CCFLs operate for several thousands of hours with long life types achieving over 50,000 hours. High Brightness light source ~ excellent at providing consistent and even illumination over wide surface areas. Low power consumption. Low voltage input required for the electronic ballast. Vibration and shock resistant. Available in many shades of white (e.g. warm white, cool white) and red, green, blue.
ø 1.8 mm 5 mA 50,000 cd/m2 15,000 hours x and y coordinates according to selection of phosphor coating.
ø 2.0 mm 5 mA 43,000 cd/m2 15,000 hours x and y coordinates according to selection of phosphor coating.
Part Number
Overall Length
Active Length
Voltage
Watts
CCFL2040 CCFL2060 CCFL20100 CCFL20150
40 60 100 150
27,5 45 85 135
160 220 320 400
0,8 1,1 1,6 2,0
Applications: LCD back lighting e.g. lap top computer, TVs, video camera screens. Back lighting of vehicle instrument clusters. Aviation navigation screens. Advertising, Art and Display signboards. Building illumination and decorative effects. Emergency lighting signs. Point of Sale Displays. Scanners and facsimile machines. CCFLs require a matched electronic ballast unit for successful operation. A range of suitable ballasts are available from CML Innovative Technologies (Refer to page 9).
6
Other lamp lengths according to request. Connection terminals: Regular format: solid wire terminal leads. Special Order: flexible flying leads (cables) with fittings.
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
7
CCFLs
CCFLs
2,6mm CCFLs
4,1mm CCFLs Diameter: Current: Surface Brightness: Life Hours: CIE Colour:
Diameter: Current: Surface Brightness: Life Hours: CIE Colour:
ø 2.6 mm 5 mA 30,000 cd/m2 50,000 hours x and y coordinates according to selection of phosphor coating.
Part Number
Overall Length
Active Length
Voltage
Watts
Shape
CCFL26100 CCFL26150 CCFL26175 CCFL26186U9B CCFL26200 CCFL26225 CCFL26250 CCFL26280 CCFL26300 CCFL26315 CCFL26360 CCFL26390 CCFL26420
100 150 175 186 200 225 250 280 300 315 360 390 420
85 135 160 161 185 210 235 265 285 300 340 370 400
265 380 405 430 440 490 550 620 700 720 760 820 850
1,3 1,9 2,0 2,15 2,2 2,45 2,75 3,1 3,5 3,6 3,9 4,1 4,25
Bar Bar Bar U Bar Bar Bar Bar Bar Bar Bar Bar Bar
ø 4,1 mm 5 mA 14,000 cd/m2 15,000 hours x and y coordinates according to selection of phosphor coating.
Part Number
Overall Length
Active Length
Voltage
Watts
CCFL41100 CCFL41150 CCFL41175 CCFL41200 CCFL41300 CCFL41400
100 150 175 200 300 400
75 125 150 175 275 375
260 310 340 370 600 800
1,3 1,55 1,7 1,85 3,0 4,0
Other lamp lengths according to request. Connection terminals: Regular format: solid wire terminal leads. Special Order: flexible flying leads (cables) with fittings.
Electronic Ballasts Operating Frequency: Lamp Drive Current: Input current: Operating temp: Order Code Input Volts (Vdc)
Other lamp lengths according to request. Connection terminals: Regular format: solid wire terminal leads. Special Order: flexible flying leads (cables) with fittings.
8
INV1 INV5 INV2 INV6 INV4 INV8 INV 9 INV11 INV10
12 12 12 12 12 12 5 5 5
35 kHz 5 mA 210 ~ 900 mA (subject to inverter type) 0 ~ 50º C CCFL No. of CCFLs Circuit Board Length can be driven dimensions (mm) (mm) (Qty) WxLxH 50 ~ 150 1 18 x 49 x 13 50 ~ 150 2 18 x 49 x 13 150 ~ 300 1 20 x 70 x 15 150 ~ 300 2 20 x 70 x 15 300 ~ 420 1 25 x 75 x 15 300 ~ 420 2 25 x 75 x 15 50 ~ 150 1 18 x 49 x 13 50 ~ 150 2 18 x 49 x 13 150 ~ 280 1 20 x 70 x 15
DC input connector and wires (code OCL 01) Output connector with silicone rubber insulated wires (code OCL 02).
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
9
Incandescent Lamps
Incandescent Lamps
Lamp Construction
Replaceable lamps
An incandescent lamp consists of a tungsten filament within a glass envelope containing a vacuum or inert gas atmosphere. Filaments are made of tungsten wire which can be resistance heated to incandesce for long periods, has a high melting point 3655°K, and has a low rate of evaporation at elevated temperatures. The varying electrical characteristics of the lamps require different filament dimensions. This can result in various shapes of filament construction. These shapes are identified by a filament code. Filaments can be made of straight wire (S), coiled (C) or coiled coil (CC) wire. Short filaments require no additional supports but higher voltage, longer filaments may have one or two supports.
EBS Type lamps
The EBS-Type Lamps can be interlocked by a quarter turn in a suitable PCB cutout. Lamps are available which can be installed from the front or from the rear of the PCB. EBS types may be used with both single and double sided PCB. Coloured lamps
Glass envelopes are available in several shapes and sizes. The most common shapes are tubular, round (globular) and pear-shaped which have designation codes T, G and S respectively. Two size codes are in common use: one - the oldest established - is based upon increments of 1/8-inch so that 1 = 1/8” = 3mm, 2 = 1/4” = 6mm, etc, and the other is a simple millimeter code. Thus, a l0mm diameter bulb is T31/4 or T10. To distinguish the two codes the millimeter version invariably does not have a dash between the letters and the numeric parts.
To impart colour to the light emitted by an incandescent lamp it is common to use a coloured light filter, whether it be a coloured lens or a silicone boot, or a colour coated lamp.In most applications for indicator lamps the definition of colours is based upon the two ordinate system found in the CIE Chromaticity Diagram.
Various types of construction are possible; the most common being bead seal, butt seal and wedge base. The latter has the advantage of being a plug-in construction without the need for an additional cap to be fitted.
CML IT uses a precision colour measurement that indicates not only colour coordinates, but also the luminous density within selectable areas to less than 1 mm diameter. In production CML IT can hold the x, y coordinates of the colour coating to a tolerance of typ. ±.02. The colour reproduction of the printed chromaticity diagram does not give an exact definition of colour, it does however, give a close approximation of the colour.
The brightness of miniature lamps is usually measured as luminous flux using the unit lumen (Im). In the Anglo-American literature the unit “Mean Spherical Candle Power” (MSCP) is used. Both units can be related as follows: 1 MSCP = 4*pi*Lm = 12.57 Lm. The normal production tolerance is ± 25%; however for an extra charge the brightness tolerance can be reduced to 10% or 15%, designated by the suffix AS 10 or AS 15. “AS” means aged and selected. PCB Lamps
The use of lamps on PCB has become very common. The actual installation of the lamps into, and/or onto the PCB can be difficult and costly. Over the course of several years, we have developed lamps which solve many of the common installation problems. The two main categories of lamps are replaceable lamps and non replaceable lamps.
10
Lamps have to be replaceable if their life-time is shorter than the probable operating life of the application. This also allows installation of the lamp at the end of the assembly line to avoid damage caused by PCB handling.
Pure white (an equal mix of all three primary colours: red, green and blue) is located at point “E” (x and y 0.333).
The colour temperature of uncoloured vacuum lamps varies from 1500°K to 2500°K depending upon the ratio of light output to watts consumed. The corresponding colour definition for the Kelvin temperature of the filament is plotted as a curve in the chromaticity diagram. The colour temperature 4000¡ K would have colour coordinates x = .38 and y .38. The brightness of all colored lamps starts from this curve. The greater the distance from the curve the more intensive the colour causing a corresponding reduction in brightness The numbers represented by the x and y coordinates have no unit designation, but the numbers along the edge of the diagram are the wave lengths in nanometers for monochromatic Iight.
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
11
Incandescent Lamps
Wedge Base Lamps
Lamps with silicon boots
T11/2 Wedge Base Lamp (5mm)
The advantages of lamps with colour coated silicone boots compared with coloured lamps are: Nonfading during life time of lamps (with high efficiency). Temperature resistant up to 180°C. Resistant to standard solvents used for PCB cleaning. Uniform illumination by diffusion of the intensive filament’s spot. In addition to a range of standard colours, customer specific colours are available. The most economical way to get coloured light is by colouring the lamp. CML IT has developed a coating process that has significantly improved the quality of coloured lamps. The lacquer is nonfading, heat-proof and resistant to scratches and conventional solvents. It is applied in an automated spraying machine which guarantees a uniform coating on the glass. The colour coordinates and luminous flux of the lamps are measured frequently, therefore small tolerances can be maintained. The glass bulb can be etched (frosted) to diffuse the image of the filament. All lamps can be coloured. Some of the advantages of using coloured lamps instead of filters are: Saves money - The colouring of a lamp is less expensive than a colour filter. Samples of various colours and hues of colour can be procured with little expense.
Size T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5
Rating 6V 1W 6V 1,2W 12V 30mA 12V 1W 12V 1,2W 12V 1,2W 12V 2W 12V 2W 12V 2,3W 14V 65mA 14V 90mA 14V 1,5W 24V 30mA 24V 1,2W 24V 1,2W 28V 40mA
Part N° 1105 1106 1107 1108 286A 286-20L 1020 1021 1028 1030 1033 1025 1110 508 1041 1199
Size T5.6 T5.6 T5.6 T5.6 T5.6 T5.6
Rating 6,3V 40mA 6,3V 200mA 14V 80mA 14V 90mA 14V 100mA 28V 40mA
Part N° 84 86 73 37 74 85
T13/4 Wedge Base Lamp (5,6mm)
CML Innovative Technologies VALUE-ADDED SERVICES include:
Wave soldering of Printed Circuit Board Welding, crimping, and soldering of components Custom molded housings Design & manufacturing of customer light guides optimized with 3D-simulation Adding resistors and diodes Adding insulated lead wires Adding connectors, insulating tubing, and sleeving Complete cable assemblies Lighting solutions utilizing fiber optics.
12
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
13
G31/2 Lamps
Wedge Base Lamps
G31/2 Bayonet (MCC) Lamp (11mm)
T31/4 Wedge Base Lamp (10mm)
Size T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10
Rating 6V 1W 6V 2W 12V 1,2W 12V 2W 13,5V 2,2W 12V 2,6CP 12V 3W 12V 5W 12V 5W 12V 5W 12V 6W 14V 190mA 14V 3W 14V 270mA 24V 2W 24V 3W 24V 5W
Part N° 159 516 1112 509 557 512 504 501 501K 501X 1600X 161 565 194 513 505 507
Size T15 T15 T15 T15 T15 T15 T15 T15
Rating 6V 9W 12V 8W 12V 12W 12V 16W 12V 16W 12V 16W 12V 16W 24V 15W
Part N° 908 906 912 921 955 955K 955X 942
Size T20 T20
Rating (V) 12V 21W 12V 5W
Part N° 7440 7443
Size G11x24 G11x24 G11x24 G11x24 G11x24 G11x24 G11x24 G11x24 G11x24 G11x24 G11x24
Rating (V) 2,5V 0,3A 6V 0,3A 6V 0,5A 6,5V 0,3A 7,5V 0,22A 12V 2,2W 14,4V 0,12A 24V 1,2W 24V 2,8W 24V 3W 28V 0,17A
Part N° G973 G640 G641 G502 CM51 G643 CM53 G568 G651 G1185 CM356
Size G11x24 G11x24 G11x24 G11x24 G11x24 G11x24 G11x24 G11x24 G11x24 G11x24 G11x24 G11x24
Rating (V) 1,5V 0,25A 2,5V 0,25A 2,5V 0,3A 3,5V 0,3A 3,8V 0,22A 4V 0,46A 5V 0,22A 6V 0,06A 6,5V 0,3A 7,5V 0,22A 12V 2,2W 24V 2,8A
Part N° G638 G628 G972 G647 G978 G979 G649 G198 G501 CM50 G987 G650
G31/2 Miniature Screw (MES) Lamp (11mm)
T5 Wedge Base Lamp (15mm)
T61/3 Single Filament Wedge Base Lamp (20mm)
14
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
15
T31/4 Bayonet and Miniature Screw Lamps
T31/4 Bayonet and Miniature Screw Lamps
28.0 Max
T31/4 Bayonet (MCC) Lamp (T10x28)
T31/4 Bayonet (MCC) Lamp (T10x30) Size T10 x 28 T10 x 28 T10 x 28 T10 x 28 T10 x 28 T10 x 28 T10 x 28 T10 x 28 T10 x 28 T10 x 28 T10 x 28 T10 x 28 T10 x 28 T10 x 28 T10 x 28 T10 x 28 T10 x 28
Rating (V) 5V 90mA 6V 200mA 6V 0,3A 6,5V 0,3A 6,5V 0,15A 12V 0,1A 12V 1,2W 12V 2,2W 24V 1,2W 24V 2W 24V 2W 24V 2,8W 28V 2W 30V 2W 60V 0,05A 130V 0,02A 130V 20mA
Part N° W440 W1212 W640 W504 W476 W576 W1236 W643 W568 W1152 W1201 W600 W1206 W1204 W610 W1121 W1121T
Size T10x28 T10x28 T10x28 T10x28 T10x28 T10x28 T10x28 T10x28 T10x28 T10x28 T10x28 T10x28
Rating (V) 6V 0,3A 6,5V 1W 6,5V 0,3A 12V 1,2W 12V 2,2W 24V 0,05A 24V 0,083A 24V-28V 2W 24V 2,8W 30V 0,067A 60V 3W 130V 0,02A
Part N° W982 W475 W503 W575 W1309 W592 W1252 W1122 W599 W1214 W609 W1159
Rating (V) 2,5V 0,5A 6,3V 0,15A 6,3V 0,25A 14V 0,08A 14V 0,2A 28V 0,04A 28V 0,07A 28V 0,08A 28V 0,17A 55V 0,05A
Part N° CM43 CM47 CM44 CM756 CM1815 CM1819 CM1829 CM757 CM313 CM1835
Size T10x30 T10x30 T10x30 T10x30 T10x30
Rating (V) 2,5V 0,5A 6,3V 0,15A 6,3V 0,25A 28V 0,17A 48V 0,1A
Part N° CM41 CM40 CM46 CM1821 CM1823
T31/4 Miniature Screw (MES) Lamp (T10x30)
T31/4 Miniature Screw (MES) Lamp (T10x28)
16
Size T10x30 T10x30 T10x30 T10x30 T10x30 T10x30 T10x30 T10x30 T10x30 T10x30
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
17
Socketed Lamps
Socketed Lamps PC Board Lamps PC
PC Board Lamps EBS Size T2 T1 1/2 - T2 T1 3/4 T1 1/2 T1 1/2 T2 1/4
Fig.1
Fig.2
Fig.3
Voltage (V) 12,6 13,5/14/28 12/13,5/24/28 13,5/14/28 13,5 8/12,5
Fig.4
Part N° EBS-PM EBS-P/PX EBS-N EBS-R EBS-L/C EBS-J
Fig. 1 2 3 4 5 6
Fig.5
Fig.6
Size T1 1/2 - 1/4 T1 T2 T1 1/4 T1 T1 1/4 T1 1/1 - 1/4 T1 1/4
Fig.1
18
Fig.2
Fig.3
Fig.4
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
Voltage (V) 14 12/14 13,5 14 5/14 8/12,5 5/13/14 5//6,3/12
Fig.5
Fig.6
Part N° PC-BA2/7 PC-BA8/9 PC-BA13 PC-H29/35 PC-H52/53 PC-H57/59 PC-H49/51/61/62 PC-M9/23
Fig.7
Fig. 1 2 3 4 5 6 7 8
Fig.8
19
Socketed Lamps
Lampholders
PC Board Lamps SMD
TECHNICAL NOTES Size T1 T1 1/2 T1 1/2 T1 T1 1/2 - 1/4 T1
Fig.1
Fig.2
Fig.3
Voltage (V) 5/5,8/6,3/14 14 14 5/6,3/14 14 5/14
Part N° SMD-9/26 SMD-27 SMD-31/32 SMD-43/44 SMD-50 SMD-53/54
Fig.4
Fig.5
Fig. 1 2 3 4 5 6
Fig.6
CML Innovative Technologies offers a large range of lampholders all over the world for many types of lamps (wedge base T1 1/2(5mm), T3 1/4(10mm), bayonet base or P21) and supplies exterior and interior lighting in automotive applications and also gaming industries. Lampholders have been designed for different types of use : for printed circuits (PCB) with integrated connectors to be crimped, pushed-in fit or welded and answer to the need of replacement of lamp. Our products can be assembled by manual or automatic process (feeding by taping, vibratory bowl or tube). CML Innovative Technologies can supply with different colours, lamps and seal according to your requirement. As an added-value service, CML IT can supply lampholders crimped into an electric circuit: stamping part or PCB.
PC Board Lamps KW Size T1 1/4 - T3 1/4
Fig.1
20
Voltage (V) 13,5/28
Part N° KW
Fig. 1-2
Fig.2
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
21
Lampholders
Lampholders
T31/4 Lampholder Wedge Base (10mm)
P21 Lampholder (21 Watts) Application Tum signal lamp Tum signal lamp Tum signal lamp
Body material Polyamide with glass fibre Polyamide with glass fibre Polyamide with glass fibre
Part N° 7908 7909 7910
Bulb Type T5 T5 T5 T5 T5 T5
Bulb designation (V) 12V/24V 12V/24V 12V 24V 12V/24V 12V/24V
Part N° 7111 6797 7297 7566/67/68 6799 5633/5650
P21 are delivered without lamp. Lamp upon request. T11/2 Lampholder Wedge Base (5mm)
C 68800 Copper Alloy Hard Temper
Bulb type T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10 T10
Bulb designation(V) 12V/24V 12V/24V 12V/24V 12V/24V 12V/24V 12V/24V 12V/24V 12V/24V 12V/24V 12V/24V 12V/24V 12V/24V C 26000 Brass C 26000 Brass 12V/24V, Sigma 2
Part N° 7121 7080 7416 7496 7418 7545 7575 7547 7147 7643 7668 7530/7494 5631 5602 8366
Bulb type T15
Bulb designation(V) 12V/24V
Part N° 5377
T13/4 Lampholder Wedge base (5,6mm) Description T13/4(5,6 mm)
Contact material C 68800 Copper Alloy Hard Temper
Part N° 5605 T15 Lampholder Wedge Base
22
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
23
Aviation Lamps
Aviation Lamps CML Innovative Technologies offers a wide and complete range of aviation lamps, from incandescent, halogen to fluorescents. Full list and additional information upon request. All lamps are approved for aviation use by legal authorities. Aviation Halogen Aircraft Lamp Volts (V)
Wattage (W)
10 12 28 28
100 10 50 100
Light Output Filament shape Lm Mscp 1630 126 750 1760
130 10 60 140
Life Hours
Lamp Base
Part N°
C-8 C-81 CC-8 CC-8
1000 2000 1000 1000
end caps bayonet BA9s end caps end caps
1978X 2059 8-A103 1970X
Aviation Anti-Collision Warning Lamp Volts (V)
Wattage (W)
Filament shape
Life Hours
Lamp Base
Part N°
28
21
CC-6
300
Bayonet BA15s
CM1524
28
26
CC-6
300
Bayonet BA15s
A-7512-24
28
40
CC-6
300
Bayonet BA15s
A-4174-24
Aviation Incandescent Aircraft Lamp Volts (V)
Wattage
5 5 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 6 28
60mA 115mA 24mA 50mA 40mA 40mA 40mA 300mA 560mA 520mA 510mA 670mA 17W 18W 21W 36W 800mA 1020mA 610mA 2000mA 24mA
Light Output Filament shape
Lm 0,63 1,9 1,9 3,8 3,8 4,3 3,8 75 201 188 188 264 188 226 264 553 264 402 188 238 1,6
Mscp 0,05 0,15 0,15 0,3 0,3 0,34 0,3 6 16 15 15 21 15 18 21 44 21 32 15 19 0,13
Life Hours
Size
Lamp Base
Fig.
Part N°
40.000 40.000 4.000 16.000 7.000 4.000 7.000 500 2.000 300 300 300 1.000 2.000 2.000 1.000 1.000 500 1000 50 4000
T1 (T3) T1 (T3) T1 (T3) T1 1/4 (T4) T1 1/4 (T5.6) T1 3/4 (T5.6) T1 3/4 (T5.6) T4 1/2 (T14) B-6 (B19) B-6 (B19) S-8 (S25) S-8 (S25) S-8 (S25) S-8 (S25) S-8 (S25) S-11 (S35) S-8 (S25) S-8 (S25) S-8 (S25) T2 1/4 (T7) T1 (T3)
Wire terminal B-Pin (2,54) B-Pin (2,54) Special Midget Flange Midget Flange, SX6s Midget Groove, S5.7s Bi-Pin (3.18) Miniature Bayonet, BA9s Bayonet BA15s Bayonet BA15s Bayonet BA15s Bayonet BA15s Bayonet BA15s Bayonet BA15s Bayonet BA15s Bayonet BA15s Bayonet BA15s Bayonet BA15s Bayonet BA15s Miniature Bayonet, BA9s Sub -midget flange
1 2 2 3 4 5 6 7 8 8 9 9 9 9 9 10 9 9 9 11 12
683 8-2400 8-2402 737AS15 387 334 7387 1495 1308 1309IF 305 307 1691 2332SB 2233 3011 1665 1683 1691 767 6839
C-2R C-2R CC-2F C-2F C-2F C-2F C-2F C-2F CC-8 2xC-2R C-2V C-2V 2xC-2R CC-8S CC-8S C-2V C-2V 2C-6 2C-2R C6 CC-2F
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
Fig.6
Fig.7
Fig.8
Fig.9
Fig.10
Fig.11
Fig.12
Aviation Xenon Flashtube Max Length mm
Max Length Inches
Rated Life Hrs
Light Output Lm
Wattage (W)
Lamp Base
Part N°
117
4,6
2000*
95cd/s@32j
40
Special End Caps
55-0331-3
* Life defined as 9 million flashes at flash rate of 75 flashes per minute = (9 x 106) / 75 = 120,000 min = 2000 hours. cd/s = candelas per second. Please note the size designation is T21/2 (T8).
24
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
25
Aviation Fluorescent Lamps Aviation Fluorescent Lamp
Max Length Rated mm inches T5 (Ø 16mm) 150 6 150 6 150 6 150 6 226 9 226 9 302 12 302 12 302 12 302 12 531 21 531 21 531 21 531 21 760 30 760 30 T8 (Ø 25mm) 909 36 T12 (Ø 38mm) 984 39 984 39
Fig.1
26
Life Hrs
Light Output Lm
Wattage W
Colour
Cap
Fig. N°
Part N°
7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 8000 8000
145 140 145 140 290 270 400 380 400 380 880 860 880 860 1150 1150
4 4 4 4 6 6 8 8 8 8 13 13 13 13 18 18
Warm White Cool White Warm White Cool White Warm White Cool White Warm White Cool White Warm White Cool White Warm White Cool White Warm White Cool White Warm White Cool White
G5, Bi-Pin G5, Bi-Pin Pinless Pinless G5, Bi-Pin G5, Bi-Pin G5, Bi-Pin G5, Bi-Pin Pinless Pinless G5, Bi-Pin G5, Bi-Pin Pinless Pinless G5, Bi-Pin G5, Bi-Pin
1 1 2 2 1 1 1 1 2 2 1 1 2 2 1 1
CM5104WW CM5104CW 5004WW 5004CW CM5106WW CM5106CW CM5108WW CM5108CW 5008WW 5008CW CM5113WW CM5113WW 5013WW 5013WW 18WT5-WW 18WT5-CW
14000
2200
30
Cool White
G13, Bi-Pin
1
F30W133TB
9000 9000
2800 2800
40 40
Warm White Cool White
G13, Bi-Pin G13, Bi-Pin
1 1
F40W1M129 F40W1M133
Fig.2
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
Brain-Trust & axion conseil - Imprimé en CEE - CML Innovative Technologies S.A.S. RCS Besançon 328 358 734 All datas are subject to changes without notices - Crédit photos : CML IT - Agilent Technologies - November 2004
For any inquiries, please contact our sales representatives at the following coordinates:
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com