Light Integrated Trim (LIT) SPECIfication PRICE Book TM
• Decorative: High visual impact • Versatile: Multiple applications • Flexible: Any custom length of uniform light including 900 turns • Modular: Few interlocking components—many combinations • Easy to Install: Components snap together A Division of Belwith Products, LLC
It’s as easy as 1-2-3. 1. Every LIT application starts with the plastic Housing Channel. You can cut/connect any number of the standard 4' sections to create the entire custom length of your application including 900 corners (exterior or interior). Next, lay the LED strip in the center of the Housing Channel. The strip is flexible and will turn around 900 corners. You can cut/connect strip segments of any length using the LED strip connectors (they work like staples). 2. Depending on your application select the appropriate plastic Diffuser or Channel Cover option and snap it onto the Housing Channel to lock in the LED strip. As with the Housing Channel, you can cut/connect diffuser segments to your exact specifications.
Trim Options
Diffuser Options Decorative Trim Aurora
Extended Diffuser
3. Select the Decorative Trim style and finish that fits your décor. The Decorative Trim comes in 12" sections which snap on the Housing Channel and interlock with the Diffuser. Decorative Trim sections can be cut to any length (refer to Installation Tips).
Decorative Trim Diamond
Flat Diffuser
Housing Channel
Decorative Trim Oceana
LED Strip
Functional Diffuser
Several design aspects of this innovative system are protected under Patents Pending.
Channel Cover
Utility Housing This rectangular plastic tube is designed to be used as a housing channel and a light diffuser combination. Its inner pocket allows for the insertion of non-shielded LED strip that remains secure and protected. The available end caps are used for both shielding the tube and surface-mounting your custom length section.
LED STRIPS There are two types of LED strips, shielded and non-shielded. The shielding refers to a specially designed silicone tube that protects the LED strip from the environment (exterior, elements, or even under water applications). The tube is continuous through the entire 16' length of the strip, and can be sealed on both ends using various methods (see Installation Tips). Each type of LED strip is available in two different light colors: warm and pure white, as measured by degrees Kelvin (see Specifications section).
LED Strip • Flexible 16'-long strip interspersed with LEDs spaced one-half inch apart • Shielded strip is encased in transparent rectangular silicone tube • Available in two light colors, pure white (simulates daylight), and warm light (simulates incandescent bulb light) • Shielded LED Strip is recommended for use with Housing Channel applications • Non-Shielded LED Strip is required for Utility Housing application Package Qty
Package Type
MSRP*
UPC#
LT0100
Item#
Shielded LED Strip, Pure White, 73 lumen per ft.
Description
Length 16'
1
Bag
$150.79
078555848385
LT0101
Shielded LED Strip, Warm White, 55 lumen per ft.
16'
1
Bag
$150.79
078555848392
LT0102
Non-Shielded LED Strip, Pure White, 73 lumen per ft.
16'
1
Bag
$129.99
078555848408
LT0103
Non-Shielded LED Strip, Warm White, 55 lumen per ft.
16'
1
Bag
$129.99
078555848415
CONNECTORS & POWER Connecting LED strips to any desired custom length while maintaining the exact LED spacing is easy. No more soldering or ugly gaps between strip connections. You can cut and splice multiple LED strips to form the exact length you desire by using the specially designed Strip Connectors. The connectors work with all three types of strips (shielded LED, non-shielded LED, and Strip Wire). You can bring low voltage power to your LIT application by using the power adapter(s) (one adapter per 32' LED length) and the Strip Wire. These are safe, low voltage flat wires that are easy to conceal.
Strip Wire • Used to connect LED strip to a power adapter (or other LED strip sections) over long distances • Flexible, easy to conceal, 2 conductor Flat Wire (0.025" thickness) • Standard reels of 16'-long strip (black color, can be easily secured with tape and painted even onto a wall)
Item# LT0110
Description
Length
Strip Wire-Black
Package Qty
16'
1
Package Type
MSRP*
UPC#
Bag
$34.99
078555848446
Strip Connectors • Connect and conduct electricity between spliced strip sections (work with both LED Strip and Strip Wire) • Maintain the center-to-center distance between LEDs for uniform and consistent light intensity
Package Type
MSRP*
UPC#
LT0104
Item#
Strip Connector Set - Straight
Description
-
10
Box
$35.99
078555848422
LT0106
Strip Connector Set - 90° Flat Corner
-
10
Box
$35.99
078555848439
*All MSRP pricing is based on package quantity
Length
Package Qty
© 2012 Keeler is a division of Belwith Products, LLC | All Rights Reserved | www.keelerproducts.com
Page 2
Power Adapter & Strip End Connector • • • • • Item#
Low voltage power adapter 12V/4A (5"x1½"X1¾" centered between two 63" wires) - UL Listed Plugs into standard 120V outlets Includes power cord and strip end connector Powers up to 32' of LED strips Designed for continuous use (refer to safety features in the Specifications section) Package Type
MSRP*
UPC#
LT0112
Description 4A Power Adapter with Strip End Connector
Length -
Package Qty 1
Bag
$52.99
078555848453
LT0111
Strip End Connector
-
1
Bag
$12.99
078555848460
Light Controller - Wireless On/Off/Dimming with Smartphones • Download the SecuRemote free app from your smartphone store (Android, iPhone, BlackBerry) and control your lighting (on/off, dim, custom schedule) using this SecuRemote device within Bluetooth® range (typically 60' - 100') • Connects between the low voltage end of the power adapter and the LED strip • Will operate up to a maximum 32' of LED strip Item# LT0143
Description
Length
Light Controller Model SRL727
Package Qty
-
1
Package Type
MSRP*
UPC#
Box
$124.00
078555848477
HOUSING, DIFFUSER & COVER COMPONENTS All housing, diffuser, and cover components are made of opaque white UV resistant plastic (the cover is also provided in clear non-UV rated plastic). The Extended Diffuser, Functional Diffuser, and the Utility Housing are designed to diffuse the LED light into a smooth white uniform illumination. The Flat Diffuser provides the very shallow depth required by some decorative applications while hiding the LED strip when it is not powered on.
Housing Channel
1.08"
• Holds the LED strip and interlocks with LIT components (snapping action) • Semi-rigid plastic, can be mounted in many different ways using various fastening methods (refer to Installation Tips)
.22"
• No fasteners included 1.08"
Item# LT0114
Description
Length
Housing Channel
Package Qty
4'
4
Package Type
MSRP*
UPC#
Box
$49.40
078555848484 .64"
Housing Channel Alignment Connectors • Thin aluminum strips that provide fine directional alignment when joining two Housing Channel sections
1.08"
• Use two connectors for joining a section (refer to Installation Tips) .64" • Available for three types of connections, 900 interior/exterior corner. 900 flat corner and linear
Package Type
MSRP*
UPC#
LT0123
Item#
Description 900 interior/exterior corner
-
10
Bag
$57.13
078555848569
LT0124
900 flat corner
-
8
Bag
$26.11 .82"
078555848576
LT0125
Linear
-
20
Bag
$14.69
078555848583 .13"
*All MSRP pricing is based on package quantity
Length
Package Qty
© 2012 Keeler is a division of Belwith Products, LLC | All Rights Reserved | www.keelerproducts.com .47"
Page 3
1.08"
.64"
Flat Diffuser • Enhances the decorative visual effect by concealing the LED strip when the power is off and providing a background that complements the Decorative Trim
.82"
• Interlocks with the housing channel, holds the LED strip securely, and allows for the attachment of the decorative trim
.13"
• For low profile trim applications (refer to Installation Tip) • Available in gold and silver toned translucent plastic Item#
Description
Length
Package Qty
Package Type
LT0115
Flat Diffuser gold tone
4'
4
Box
LT0119
Flat Diffuser silver tone
4'
4
Box
MSRP* $31.20 1.08" $31.20
UPC# .47" 078555848514 078555848521
1.17" .22" .28" 1.08" 1.08"
Extended Diffuser • Enhances the decorative visual effect by diffusing the LED light into a uniform illumination with consistent light intensity • Interlocks with the housing channel, holds the LED strip securely, and allows for the attachment of the Decorative Trim • For extended profile trim applications (refer to Installation Tips)
1.10" 1.08"
.22" 1.08"
Item# LT0145
Description
Length
Extended Diffuser
Package Qty
4'
4
Package Type Box
.64" .22"
MSRP* 1.08" 1.10" 1.08" $100.00
.22"
UPC# 078555848507 .64" .64" .25" .64"
1.08" 1.10"
Functional Diffuser • For extended profile trim applications (refer to Installation Tips) • Diffuses the LED light into a uniform illumination with consistent light intensity • Does not allow the attachment of Decorative Trim
Item# LT0118
Description
Length
Functional Diffuser
Package Qty
4'
4
Package Type Box
.82" 1.08" .64" .13" .64"
MSRP* .82" $100.00 .82" 1.17"
UPC# .47" 078555848491 .13"
.13" .28" .47"
Channel Cover • For functional lighting applications
1.10" 1.17"
• Available in clear non-UV rated plastic
.47"
1.17" .22" .28"
Item# LT0120
Description Channel Cover
Length
Package Qty
4'
4
Package Type Box
MSRP*
UPC#
$49.40 1.10" 1.10"
.28" 078555848538
1.10" .25" .22"
1.10" 1.10"
*All MSRP pricing is based on package quantity
.22"
© 2012 Keeler is a division of Belwith Products, LLC | All Rights Reserved | www.keelerproducts.com 1.10"
Page 4
.64" .47"
DECORATIVE TRIM
1.17" Elevate your interiors with Keeler® decorative hardware trim designs. Each 12" section is a metal casting, hand buffed, polished, .82" and available in multiple finishes that will coordinate with your cabinet, furniture, and architectural door hardware. Snaps easily and securely onto a diffuser. All Decorative Trim designs interlock with the Flat and Extended Diffusers (snapping action) and can .13" be cut during installation (refer to Installation Tips). .28"
1.10" 1.08"
.47"
Decorative Trim - Aurora The Aurora design was inspired by the breathtaking and timeless solar winds that create the Aurora Borealis. Let the refreshing lines of Aurora breeze through your home.
1.17"
.22" .22"
1.10" 1.08" .28"
LT0128-14
Item#
Bright Nickel
Finish
Length
12"
Package Qty 8
Package Type Box
$169.00 1.10"
MSRP*
UPC# .25" 078555848637 .64"
LT0128-SS
Stainless Steel
12"
8
Box
$169.00
078555848644
LT0128-RB
Refined Bronze
12"
8
Box
$169.00 1.10"
078555848651
LT0128-06
Winchester Brass
12"
8
Box
$169.00
.22" 078555848668
1.08" 1.10" .64"
Decorative Trim - Diamond The Diamond design was inspired by the purity and strength of these radiant stones. Set the enduring beauty of Diamond into your home.
Item#
Finish
Length
Package Qty
Package Type
.25"
1.10" .82"
MSRP*
.13" UPC#
LT0137-14
Bright Nickel
12"
8
Box
$169.00
078555848675
LT0137-SS
Stainless Steel
12"
8
Box
$169.00
078555848682
LT0137-RB
Refined Bronze
12"
8
Box
$169.00
LT0137-06
Winchester Brass
12"
8
Box
$169.00
078555848699 .47" 078555848705
1.17"
Decorative Trim - Oceana
.28"
The Oceana design was inspired by the boundless waters of the ocean. Bring the elemental power of Oceana to your home. 1.10"
LT0126-14
Item#
Bright Nickel
Finish
Length
12"
Package Qty 8
Package Type Box
$185.99
MSRP*
UPC# .22" 078555848590
LT0126-SS
Stainless Steel
12"
8
Box
$185.99
078555848606
LT0126-RB
Refined Bronze
12"
8
Box
1.10" $185.99
078555848613
LT0126-06
Winchester Brass
12"
8
Box
$185.99
078555848620 .25"
1.10"
*All MSRP pricing is based on package quantity
© 2012 Keeler is a division of Belwith Products, LLC | All Rights Reserved | www.keelerproducts.com
Page 5
Utility Housing This rectangular plastic tube is designed to be used as a housing channel and a light diffuser combination. Its inner pocket allows for the insertion of non-shielded LED strip that remains secure and protected. The available end caps are used for both shielding the tube and surface-mounting your custom length section.
.500"
Utility Housing • Rectangular diffuser and LED holder combination • End caps with power wiring opening
.750"
• Designed to work with non-shielded LED strip • White translucent plastic
MSRP*
UPC#
LT0121
Item#
Description Utility Housing
Length
4'
Package Qty 4
Package Type Box
$100.00
078555848545
LT0122
End Cap for Utility Housing-Pair
-
2
Bag
$23.40
078555848552
COMPONENT SPECIFICATIONs 12V/4A Power Adapter This adapter is a regulated power supply switch rated for continuous use. Plugs into a standard 110V outlet. 1. Safety features include: • Short-Circuit Protection. Automatically powers down in the case of an electrical short and will automatically reset when the short is removed. • Thermal Overload Protection. Automatically powers down if a thermal overload occurs and will automatically reset when the temperature falls within the acceptable operating range. A thermal overload can occur if there is an electrical short or if the power requirements exceed the equivalent of 32' of LED strip. 2. The regulated power output ensures consistency of light intensity. 3. Detachable AC input power cord (IEEE C13). This adapter is recommended only for use with the LED strip specified in this document and supplied by Belwith Products, LLC. Options for ON/OFF and Dimming 1. The Light Controller Model SRL727 (Item # LT0143) connects wirelessly to any smartphone (Android, iPhone, Blackberry) using Bluetooth and a free app. It allows the homeowner/user to power the LED strip On or Off, adjust the light intensity, and even set an automatic schedule directly from their smartphone. Download the app directly from your smartphone’s app store (search SecuRemote). Make sure your smartphone Bluetooth communication is on. Typical wireless control range is 60’. Plugs in between the AC adaptor and the LED strip. NOTE: Using alternate dimming controllers is not recommended for this product as they may create hazardous conditions. NOTE: The Light Controller Model SRL 727 will not function with alternate LED Strips. 2. X10 remote controllers for On/Off function only are available at www.X10.com. Dimming function does not work using X10 controllers. 3. Plug power adapter into a standard AC outlet controlled by a wall switch. Dimming function does not work using this method. LED Strip Specifications 1. 300 equally spaced LEDs per 16' strip length. LEDs are focused for brilliance. 2. Power Consumption: 1.4 W/ft. 3. Light Output (Lumens/ft): 73 Lumens for Cool White, 55 Lumens for Warm White. 4. Light Color: 6000K–7000K for Cool White, 2700K–3300K for Warm White. 5. Conformal coating on the LED strip prevents corrosion. UV Resistance “UV resistant” refers to stabilized plastic material which withstands weathering due to the damaging effect of the ultraviolet rays of the sun. All housing channels and diffusers are UV resistant with the exception of the clear Channel Cover. The latter can be used in exterior applications as it will remain structurally sound although it will turn yellow over time. LIT Trim Cleaning maintenance of LIT Trim use soap and water. The LIT Trim is not dishwasher safe.
Kelvin Temperature Scale 1000 2000
Standard Incadescent 2,700K
3000
Warm LED Strip 3,000K
4000
Warm (3K) Metal Halide 3,200K
5000
Cool White Fluorescent 4,200K
6000
Daylight Metal Halide 5,500K
7000 8000
*All MSRP pricing is based on package quantity
WARM
High Pressure Sodium 2,200K
COOL
Cool LED Strip 6,500K
© 2012 Keeler is a division of Belwith Products, LLC | All Rights Reserved | www.keelerproducts.com
Page 6
Installation tips Shielded LED Strip Sealing the ends of the 16’ (or a section) of the strip allows wet or even underwater applications. Sealing is as simple as inserting a small amount of waterproof silicone compound or caulk into the tube ends (0.25” to 1” deep). Loctite® or Dap Kitchen & Bath silicone are readily available. Housing Channel The Housing Channel is designed so that it can be easily secured to multiple surfaces and materials. For instance, perforated holes (spaced 6" apart) allow the use of screws (#6 flat head screws or equivalent width, length depends on the mounting application). The back side of the channel is designed so that it can be secured with double coated tape with quick bonding adhesive, plastic adhesive or even mortar. The channel can be easily cut with a small saw or even heavy duty scissors, to shorter lengths if desired. You can use the existing screw holes or you can drill new screw holes. Because there are many ways to mount the Housing Channel, fasteners are not included as part of an order (figure 3). Alignment connectors allow for joining sections in a straight line or 900 turns (figure 1). The alignment connectors are inserted into the back channel slots as shown in the example (figure 2). Besides alignment, these connectors can also provide structural rigidity for a corner if desired. Figure 1
Figure 2
Figure 3
Strip Connectors A Strip Connector set comprises two parts: The bottom part with prongs and the top part with holes. To splice a strip first make sure you cut it along the line between the repeating hole pattern on the strip(s). Then attach the ends of the two sections to the bottom connector by pressing the Strip Wire holes through the connector prongs as shown (figure 4-5). Make sure the connecting strips have the polarity signs aligned (+with+ and –with–). Press the top connector through the prongs to sandwich the spliced strip sections (figure 6). Last, use pliers to crimp the prongs ensuring a tight fit (figure 7). There are two types of strip connectors. One for a straight connections (LT0104-figure 7) and one for a 900 flat corner connections (LT0106-figure 8). Note that a 900 flat corner can be formed by just folding the LED strip (figure 9). The strip wire is flexible and bends enough to make the fold by using just your fingers. Do not compress the fold further with pliers or other tools as you may break the strip wire. Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
Press Through Bottom Connector
Align Polarity
Press Through Top Connector
Crimp Prongs
900 Flat Corner Connector Connection
900 Fold Over
Strip Wire Strip Wire makes installations fast and easy with a professional appearance. The low thickness of the Strip Wire (0.025") makes it easy to hide under paint, wallpaper, spackle, flooring, wallboards, moldings and cement. In addition, you can splice any custom length that suits your application using the Strip Connectors and bring power from a distant adapter location. Strip wire is a unique solution to any wiring application where stealth and aesthetics are desired. Diffusers Snapping a selected diffuser onto the housing channel will hold the LED strip firmly in place. The snapping action should start from the end of a section at a slight angle and then pressed throughout the remaining section (like zipping a plastic bag). Diffuser sections can be bonded to the Housing Channel by using plastic bonding systems such as Loctite®. Heavy duty clear PVC cement can be used to bond the joints. LIT Trim For cutting and mitering Decorative Trim use a compound mitre saw blade with 60 or more teeth and carbide tip. Use black RTV silicone or black 3M Strip-Calk to fill any joints where light is escaping through your trim. Power Connection If you want to power an LED section longer that 32' all you have to do is use multiple adapters which can all be located on a power strip that is connected to a wall switch or a remote On/Off switch. You can use Strip Connectors and Strip Wire to connect each one of the adapters to their respective 32' section. Such Strip wire sections can be hidden even behind or around the housing channel.
*All MSRP pricing is based on package quantity
© 2012 Keeler is a division of Belwith Products, LLC | All Rights Reserved | www.keelerproducts.com
Page 7
Typical Mounting Applications The LIT modularity and ease of installation allows endless design applications. Below are examples of basic mounting applications for designers to consider. The use of a Flat Diffuser and Decorative Trim will result in a fairly slim LIT that can be flush mounted on almost any surface or recessed in a groove (figure 8). A 0.22” deep groove will bring the base of the Decorative Trim flush with the mounting surface (figure 10-12). Light will be seen behind the Decorative Trim. The Decorative Trim design is made to compliment the LED spacing pattern. Figure 10
Figure 11
WALL
LIGHT CROWN DIRECTION
UTILITY HOUSING LED STRIP
1.10" LIGHT LIGHT DIRECTION LIGHT DIRECTION DIRECTION
.50"
TRIM BOARD
CEILING
CROWN STOP STOP CROWN CROWN STOP BEAD MOLDING MOLDING BEAD MOLDING BEAD
FLAT DIFFUSER
TRIM BOARD
LIGHT LIGHT DIRECTION LIGHT DIRECTION DIRECTION
TRIM BOARD
STOP
LIGHT LIGHT DIRECTION LIGHT DIRECTION DIRECTION
.50"
LIGHT LIGHT DIRECTION LIGHT DIRECTION DIRECTION
LIGHT DIRECTION LIGHT DIRECTION
LIGHT DIRECTION
CROWN MOLDING
WALL WALL WALL SURFACE SURFACE SURFACE
TRIM BOARD
CEILING
TRIM BOARD
STOP BEAD
CROWN STOP STOP CROWN CROWN STOP BEAD MOLDING MOLDING BEAD MOLDING BEAD
Trim System Detail TRIM BOARD
CROWN STOP STOP CROWN CROWN STOP BEAD MOLDING MOLDING BEAD MOLDING BEAD
Figure 12
DECORATIVE TRIM
LIGHT
LIGHT DIRECTION
LIGHT DIRECTION
LIGHT DIRECTION
SURFACE DIRECTION that can be incorporated into the overall decorative 1.10" TheBEAD use of an MOLDING Extended Diffuser and Decorative Trim provides vertical illumination 1.10" 13). The light will design. If the entire LIT assembly is completely recessed the light will be seen only behind theBOARD Decorative Trim (figure FLUSH FLUSH MOUNT MOUNT ON STOP ON STOP BEADING BEADING RECESSED RECESSED IN STOP IN STOP BEADING BEADING SANDWICHED SANDWICHED BETWEEN BETWEEN TRIMTRIM BOARD FULLY FULLY RECESSED RECESSED IN STOP IN STOP BEADING BEADING FLUSHbe MOUNT ON STOP BEADING RECESSED IN STOP BEADING SANDWICHED TRIM BOARD RECESSEDof IN STOP completely diffused (no LED pattern will be apparent). If the LIT assembly is BETWEEN partially recessed so that all orFULLY a portion theBEADING diffuser’s horizontal walls are exposed then the light will also be seen above and below the Decorative Trim which will appear to float (figure 14). Incorporating light in a vertical direction can lead to unique visual effects as it can accentuate features of the wall trim above and below LIT. .50"
Figure 13
LIGHT DIRECTION
Figure 14
Figure 15
WALL SURFACE
.50"
Trim System Detail CEILING
CEILING
1.10"
.50"
CEILING
1.10"
LIGHT DIRECTION
LIGHT DIRECTION
LIGHT DIRECTION
WALL SURFACE
LIGHT DIRECTION
WALL SURFACE
LIGHT DIRECTION
WALL SURFACE
LIGHT DIRECTION
1.10"
1.10"
1.10"
UTILITY HOUSING LED STRIP
1.10"
EXTENDED DIFFUSER DECORATIVE TRIM
LIGHT DIRECTION
LIGHT DIRECTION
LIGHT DIRECTION
PARTIALLY RECESSED IN STOP BEADING
LIGHT DIRECTION
LIGHT DIRECTION
LIGHT DIRECTION
CROWN MOLDING
LIGHT DIRECTION
LIGHT DIRECTION
CROWN STOP MOLDING BEAD
LIGHT DIRECTION
PARTIALLY RECESSED IN STOP BEADING
CROWN STOP MOLDING BEAD
LIGHT DIRECTION
STOP BEAD
LIGHT DIRECTION
CROWN MOLDING
LIGHT DIRECTION
CROWN STOP MOLDING BEAD
LIGHT DIRECTION
CROWN STOP MOLDING BEAD
1.10"
1.10"
1.10"
1.10"
1.10"
1.10"
The Functional Diffuser and the Utility Housing can also be used in mounting applications similar to those described above, although the decorative effect will be based on light without decorative trim (figure 15). Such applications are best for functional use such as SED FULLY IN STOP RECESSED BEADING IN FULLY STOP RECESSED BEADINGIN STOP BEADING PARTIALLY RECESSED PARTIALLY IN STOP RECESSED BEADING PARTIALLY IN STOP RECESSED BEADINGIN STOP BEADING baseboards, railing, etc. LED Light Color Selection The warm white simulates the light of an incandescent bulb and it is usually softer on the eyes. Warm White presents a very good alternative for flat diffuser LIT applications. Pure White simulates the day light and it is 33% brighter than the Warm White. Pure White becomes a good option to consider in applications where an Extended Diffuser delivers complete diffusion (softer on the eyes) and potentially more functional light in the room than what a Flat Diffuser would deliver. For example, a 16' long Pure White LED strip produces more light (1,168 Lumens) than a 75 Watt incandescent bulb (1,100 Lumens).
Pricing & ordering information MSRP *All MSRP pricing is based on package quantity. Quantities All LED Strips, Housing Channels, Light Diffusers, Channel Covers and Decorative Trims are sold in pack quantities. Ordering Check with your representative for product availability. Reference www.keelerproducts.com for further product information. Belwith Products, LLC reserves the right to change prices without notice. Several design aspects of this innovative system are protected under Patents Pending The Bluetooth trademarks are owned by their proprietor and used by Belwith® Products, LLC under license. All other product or service names are the property of their respective owners. iPad, iPhone and iPod, are trademarks of Apple Inc., registered in the U.S. and other countries. U.S. Distribution only.
Customer Service
Showroom Locations
3100 Broadway SW Grandville, MI 49418 USA 1.800.235.9484 phone 1.800.858.2119 fax www.keelerproducts.com
Michigan 3100 Broadway SW Grandville, Michigan 49418 USA
Illinois 222 Merchandise Mart, Suite 163 Chicago, Illinois 60654 USA
© 2012 Keeler is a division of Belwith Products, LLC | All Rights Reserved | www.keelerproducts.com | # 73048 Rev D
North Carolina 1006 N. Main Street High Point, NC 27262 USA
A Division of Belwith Products, LLC