Being responsible is our foundation Thinking ahead makes it possible Innovation is the essence

GRUNDFOS WASTEWATER

Business with an attitude Knowledge The sharing of knowledge, experience and expertise across our global network will always lead our business forward. Innovation Combining the best technology with fresh ways of thinking, we will continue to develop even better pumps, systems, services and standards. Solution With a complete product range, capable of providing every conceivable water solution, we are

96 48 62 50 03 03

VENTURE MARKETING AS

the most complete player on the market.

www.grundfos.com

Lifting Stations

Grundfos Lifting Stations

Reduced costs and optimised efficiency Grundfos offers a range of highly efficient, lowmaintenance wastewater lifting stations for a

The Range

Unique customer benefits The Grundfos lifting stations form part of a complete range of wastewater removal and sewage handling products. Like all Grundfos products the lifting stations offer unique customer benefits, making them the natural choice for any application.

multiple of applications. The lifting stations incorporate state-of-the-art technology and straightforward thinking to provide simple solutions to complex problems.

All models have been designed to reduce operating and installation costs and optimise operating efficiency. The Grundfos range of lifting stations comprises a variety of models from small, one-source units to dual pump systems with volume capacities of up to 1,200 litres.

> Compact

Sololift 3-0

Sololift 4-2

Liftaway B 40-1

Liftaway C 40-1

Multilift M

Multilift MD

The Grundfos lifting stations are of a very compact design, easy to fit even where space is limited.

> Durable Made of durable, non-corroding materials the Grundfos lifting stations are robust and virtually maintenance-free. All outside surfaces are smooth and easy to clean.

> Versatile The Grundfos range comprises a model for every purpose. They are easy to install with easily accessible pipe connections.

> Handling of large volumes The Grundfos lifting stations cover a wide capacity range - from the one-source Sololift to the powerful Multilift series, designed for handling large volumes of wastewater and sewage.

Multilift APLD 2

The Range

>

3

(Photographs not to scale)

The Range

>

Grundfos Sololift

Customer benefits

The Grundfos Sololift 3-0 and 4-2 are sewage removal units designed for efficient removal of sewage and wastewater in one-family houses or other places with a limited discharge requirement. The Sololift is available in two sizes: the Sololift 3-0 for single-toilet installation, and the Sololift 4-2 capable of

> Robust and efficient > Elegant, compact design > Maintenance-free and easy to clean > Direct toilet connection > Gas and odour-proof > Guaranteed reliability

servicing an entire bathroom with toilet,

Sololift 3-0

washbasin, shower, bidet, etc.

The Sololift 3-0 is designed for efficient removal of sewage from single toilets situated above or below sewer level. The unit is connected direct to the toilet. Installed below sewer level, for example in a basement, the Sololift lifts the toilet discharge up to the sewer line.

Easy to install The Grundfos Sololift are cost-saving solutions, easy to install - the ideal alternative to extensive and costly plumbing work. Both models are supplied ready for installation complete with all the necessary fittings for toilet, washbasin drains and outlets for shower and bidet.

Sololift 4-2 The Sololift 4-2 is designed for collecting and pumping of the entire volume of wastewater and sewage from a toilet, washbasin, shower and bidet. The Sololift is useful where the existing pipe installations do not permit the discharges to flow to the sewer line by itself.

Sololift 4-2

Safe to use The Sololift are constructed in accordance with DIN/EN 12050 part 3, they are maintenance-free and easy to clean. The units incorporate a built-in pump with an efficient cutter system. A non-return valve ensures that no liquid returns from the sewer line, and a special ventilation outlet with an active carbon filter prevents odours from escaping into the bathroom. The motor has a built-in thermal protection.

Sololift 3-0

1 2 3 4 5 6

4

Sololifts

>

5

Toilet strainer Efficient stainless cutter system Integrated, pneumatically operated level switch Integrated non-return valve Carbon filter to prevent odours Easy-to-clean surface

Sololifts

>

Grundfos Sololifts

Performance

Technical data

Use the performance curve below when sizing the discharge for Sololift 3-0 and Sololift 4-2.

Voltage: Frequency: Enclosure class: Insulation class: Sound pressure level: Thermal protection:

H [m]

Sololift 3-0 / Sololift 4-2

6

5

Dimensions 1 x 230 V 50 Hz IP 44 F

7

Sololifts Dimensions

>

Grundfos Liftaway

For kitchens, bathrooms or utility rooms

Customer benefits

Liftaway C 40-1

located below sewer level the flexible

> Flexible, discreet installation > Odour-proof > Rubber-coated, stainless steel

The Liftaway C 40-1 model is designed for mounting on the floor or on a wall. Fitted with different types of pumps, it provides a flexible solution for pumping of wastewater from e.g. washing machines, dishwashers, washbasins or tubs.

Grundfos Liftaway (collection tank in combination with a Grundfos AP or KP pump)

non-return valve

provide efficient removal of domestic wastewater without the need for major structural modifications. The Grundfos range comprises two models, Liftaway B 40-1 and Liftaway C 40-1. The Grundfos Liftaways are constructed

Liftaway B 40-1 Designed for installation below floor level, the Liftaway B 40-1 provides a simple solution for existing buildings where wastewater has to be pumped to the sewer system.

In spite of the compact design, the Liftaway C 40-1 has a large and efficient lifting volume. Ideally combined with a Grundfos KP pump, the ready-to-install unit is supplied complete with an installation package comprising pipes and fittings and a rubber-coated non-return valve of stainless steel. (The pump must be bought separately.) Liftaway C 40-1 is equipped with an overflow protection device and an active carbon filter to eliminate odours.

The Liftaway B 40-1 is ideal for pumping wastewater from washbasins, washing machines, sanitary rooms, showers, floor drains, etc. It can also be used as a drainage pit for pumping drainage and surface water.

in accordance with EN 12050 part 2.

The Liftaway B 40-1 can be used in combination with a stainless steel Grundfos KP or AP 12 pump with float switch for automatic start/stop. (The pump must be bought separately.) The unit is supplied with all necessary pipes and fittings, including a rubber-coated stainless steel nonreturn valve. Liftaway B 40-1 features a telescopic part for easy height adjustment. The unit is easy to install. It is turnable for individual positioning and connection via three DN 100 inlets, placed at intervals of 90 degrees, and one DN 70 connection for air release.

Liftaway B 40-1

Carbon filter to eliminate odours Inlet or discharge

Overflow preventter

Inlet Grundfos KP Pump with float switch

Inlet or discharge Inlet

The discharge pipe can be connected either to the right or left-hand side of the tank. Liftaway C 40-1 can be set to two different start levels: Normal operation, approx. 260 mm. Low-level operation, approx. 135 mm (discharge from showers).

• •

Turnable top cover with strainer

Liftaway C 40-1 Water seal to eliminate odours

Telescopic part for height adjustment (additional telescopic part is available)

Grundfos KP or AP pump with level switch

Liftaway B 40-1 features a telescopic part for easy height adjustment.

8

Liftaways

>

9

Liftaways

>

Grundfos Liftaways

Technical data

Pumped liquids (both models)

Discharge connection: Liftaway B R 1 1/4 Liftaway C DN 40 Inlet connections: Liftaway B 3 x DN 100 Liftaway C 3 x DN 40, 1 x DN 40/50 Connection for venting and/or cable entry: Liftaway B 1 x DN 70 Liftaway C Cable entry as a rubber sealing No need for a venting pipe Sound pressure level:

11

2

0.5

4

1.0

6

1.5

8

2.0

10

2.5

12

3.0

3.5

Q [m3/h]

Q [l/s]

Liftaways Dimensions and Performance

>

Grundfos Multilifts M and MD

Grundfos Multilift M and MD are designed for the removal of larger volumes of wastewater and sewage

for instance in blocks

of flats, small hotels, restaurants or other building complexes. The Multilift stations are designed specially for the collection and

Customer benefits

Ready to install

> Complete units ready for installation > Gas and odour-proof > Corrosion resistant > Low-noise operation > Shock and break-proof polyethylene tank

The Grundfos Multilift M and MD stations are supplied as complete units ready for installation. The units consist of one or two vortex impeller pumps fully integrated with the collecting tank. Solutions for single or three-phase power supply are available.

Multilift M

An LC 109 controller for Multilift M and an LCD 109 controller for Multilift MD are supplied with the units.

pumping of wastewater and raw sewage from wastewater pipes and water closets

Equipped with one pump and with a tank capacity of 100 litres, Multilift M is ideally dimensioned for one-family homes or smaller commercial buildings. The Multilift M is available in seven different models with output power ranging from 1.2 to 3.2 kW.

situated below the sewer level. The Multilift stations lift the wastewater and sewage and carry it forward to the sewer line.

Multilift MD With two pumps and a tank capacity of 120 litres, the Multilift MD is ideal for multi-family homes or commercial building projects where the additional capacity and the operational security offered by a two-pump system is advantageous. Multilift MD is available in five different models with output power ranging from 1.5 to 3.2 kW.

Multilift M

The Multilift M and MD stations are supplied complete with all necessary flexible connections for inlet, discharge and ventilation pipes. The Multilift M and MD have polypropylene level sensor unit with built-in pressure switches.

Multilift M and MD are fitted with a DN 80 mm vertical discharge port with a non-return flap valve. The Multilift MD model is fitted with two non-return flap valves and a breeches pipe. The collecting tank is made of non-breakable, non-corrosive, airtight polyethylene. It is completely watertight as well as gas and odour-proof.

Pumped liquids

3

The Multilift M and MD stations are suitable for handling wastewater and other liquids containing solids, such as fibres, textiles, and faeces, with a pH value of 4 to 10.

4

1

2

The Multilift M and MD are capable of handling liquid temperatures between 0 and +40 C, for short periods of time up to +60 C. O

Multilift MD

O

Tank volume M 180

250

180

250

Tank capacity [l]

100

100

120

120

54

74

72

92

Effective volume [l]

12

Multilift Stations

>

13

MD

Inlet level [mm]

1 2 3 4

Motor/pump Non-return valve Level sensor Collecting tank

Multilift Stations

>

Grundfos Multilift Stations M and MD

Electrical data, type designation and product numbers

Multilift

Power Inlet level output P2 [mm] [kW]

Number of poles

M.12.1.4

1.2

4

M.12.3.4

1.2

4

M.15.1.4

1.5

4

M.15.3.4

1.5

4

2.2

M.22.3.4

M.24.3.2

180 and 250

M.32.3.2

3.2

4

MD.15.3.4

1.5

4

MD.24.3.2

MD.32.3.2

2.2

4

2.4

3.2

2

2

CEE plug

• • • • • • •

2

1.5

MD.22.3.4

Schuko plug

2

MD.15.1.4

Type key

Discharge connection:

DN 80 flange with 110 mm socket for flexible connection

Inlet connections:

3 x DN 100 1 x DN 150 1 x DN 50

Plug type

4

2.4

Technical data

• • • • •

Voltage [V]

Weight [kg]

Product number

The type key is used to interpret the letters and figures in the product type designation:

Example

M

D

.22

.3 .4

1 x 230

39.0

96075436

3 x 230

37.5

96075442

3 x 400

36.6

96075441

1 x 230

41.5

96075443

3 x 230

39.5

96075445

3 x 400

38.5

96075444

3 x 230

41.5

96075447

3 x 400

41.5

96075438

Performance The performance curves show pump performance with only one pump in operation and the minimum recommended flow to avoid sedimentation in the pipe system.

3 x 230

41.5

96075449

3 x 400

41.5

96075457

3 x 230

41.5

96477864

3 x 400

41.5

96477865

1 x 230

80.5

96075450

3 x 230

76.0

96075452

3 x 400

76.0

96075437

3 x 230

80.0

96075454

3 x 400

80.0

96075439

3 x 230

79.5

96075456

3 x 400

79.5

96075455

3 x 230

79.5

96477867

3 x 400

79.5

96477866

Connection for venting:

Type range (Multilift) Blank = one pumpŁ D = two pumps Power output , P2/100 (W) 1 = single-phase 3 = three-phase 2 = 2-pole motor 4 = 4-pole motor

1 x DN 75

Connection for manually operated diaphragm pump: 1 x DN 25 Sound pressure level:



15

2

4 10

6 20

8 30

10

12 40

14 50

16

18 60

Q [l/s] Q [m3/h]

Multilift Stations Performance

>

Grundfos Multilifts M and MD

Installation

Dimensions

The numbers on the drawing refer to the accessories overview, page 25/26.

Discharge pipe volumen Effective volumen

Multilift M Inlet

Multilift Single unit

Double unit

Nominal pipe diameter

height

80 mm

100 mm

180 mm

12 m

7.6 m

250 mm

16 m

10 m

180 mm

16 m

10 m

250 mm

20 m

12.6 m

The volume of the sewage in the discharge pipe may not exceed the volume effective of the Multilift tank!

The LC 109 and LCD 109 controllers are designed for direct on-line starting (DOL). In addition, the controllers provide a number of control features, such as:

• Control of one or two pumps based on signals from the level sensor in the tank. • Automatic pump changeover (alternation). • Deselection of automatic test run during long periods of inactivity (every 24 hours). • Battery back-up in case of mains supply failure. • Starting delay within a range from 0 to 255 sec.

Optional inlet connections The Grundfos Multilift M and MD offer the following optional inlet connection facilities:

Position of inlet port Horizontally

Before installing the Multilift M and MD, ensure that all local regulations covering access to the stations, venting, etc. are observed. Vertically

For the connection of

16

DN

180 mm above floor level

Euro-standardised water closets

100

250 mm above floor level

Wall mounted water closets

100

At the top of the tank

Various types of drain pipes

100/ 150

Drain pipe from washbasin, shower, etc.

The LC 109 and LCD 109 controllers are designed for the control of Multilift M and MD stations. The controllers incorporate all necessary components such as contactors, control board with lights for indication of operating condition and alarms.

Control features

The table shows the max. discharge pipe length. The Grundfos Multilift M and MD are ideally suited for installation below existing sewer level. The Multilift M and MD are supplied complete with all necessary flexible connections, clamps, bolts and nuts, anchor bolts for fixing to the floor, and a controller with a 3 m cable for automatic operation.

Controllers

• • • • •

50

Multilift Stations Installation and Dimensions

>

Multilift MD

17

(random) after returning from battery operation to mains operation. Selection of automatic alarm resetting. Selection of automatic restarting. Setting of stop delays matching the actual operating conditions. Indication of liquid level. Alarm indication of high liquid level, high motor temperature, wrong phase sequence, mains supply failure, and faulty pressure switch assembly.

Multilift Station Controllers

>

Grundfos Multilift APLD – 400 l tanks

The Grundfos Multilift APLD is a low-noise

Customer benefits

Pumped liquids

unit capable of handling large volumes of

> Complete units ready for installation > Gas and odour-proof > Corrosion-resistant collecting tanks > Straightforward installation > Large tank capacity > Possibility of parallel coupling of

The Multilift APLD is suitable for handling wastewater and other liquids containing solids up to 70 mm in diameter (AP70) or 100 mm (AP100), for instance fibres, textiles, and faeces, with a pH value of 4 to 10.

wastewater and sewage. It is, therefore, ideally suited for multi-user applications such as blocks of flats, hotels and restaurants, hospitals, schools, and other public buildings as well as industry. The Grundfos Multilift APLD is designed for installation below main

The Multilift APLD handles liquid temperatures between 0 and +40 C, for short periods of time up to +60 C. O

O

Tank volume

up to 3 tanks

Number of tanks

sewer level. The Multilift station collects the

Ready to install

sewage, lifts it and carries it forward to the

1

2

3

Total volume (l)

400

800

1200

Effective volume (l)

220

440

660

Max. inflow (l/sec.)

7.2

14.5

22.0

The Multilift APLD is fitted with two powerful sewage pumps. The unit is supplied with either one or two 400-litre collecting tanks and a level controller.

sewer system.

5

The pumps available for the systems are Grundfos AP70 or AP100. The AP70 pumps are delivered with a base plate for horizontal installation including a 100 flanged pipe stub. AP100 pumps have cast feet on the pump housing and a support for the motor.

Isolating valves, non-return valves, discharge pipes, a manually operated diaphragm pump, bolts and gaskets as well as a third 400-litre tank are available as accessories.

Multilift Station APLD

4 2

Multilift APLD with AP70 pumps are delivered with one 400-litre tank, and Multilift stations with AP100 pumps are delivered with either one or two 400-litre tanks. All necessary flexible connections, clamps and anchor bolts are included. An LCD 103 level controller is supplied with the units.

Multilift APLD

18

3

>

19

6 1

1 2 3 4 5 6

One or two powerful sewage pumps Non-return valve Level sensor 400-litre collecting tank Control panel Connections for additional 400 l tank

Multilift Station APLD

>

Grundfos Multilift Station APLD – 400 l tanks

Collecting tank The 400-litre collecting tank is made of gas and odour-proof polyethylene. The tank has a DN 150 horizontal inlet, DN 100 vertical inlet, DN 70 connection for vent pipe, DN 100 connections for one or two pumps, and a DN 50 connection for a manually operated diaphragm pump. All necessary flexible connections, clamps and anchor bolts are included.

Performance H [m]

Product number

400

135

96002648

4.6

400

135

96002644

0.78

3.7

400

135

96002649

3.3

0.78

3.6

400

135

96002645

2.70/1.90

9.6

0.80

4.4

400

187

96002650

3 x 400

2.70/1.90

5.5

0.80

4.2

400

187

96002646

3 x 230

3.50/2.40

11.0

0.80

4.4

400

187

96002651

3 x 400 3.50/2.40

6.3

0.80

4.3

400

187

96002647

APLD.100.24/400

3 x 400 3.00/2.40

5.9

0.79

6.2

400

295

96002307

APLD.100.32/400

3 x 400 4.00/3.20

7.5

0.84

6.0

400

307

96002308

APLD.100.45/400

3 x 400

5.50/4.50

10.6

0.84

6.0

400

321

96002309

APLD.100.54/400

3 x 400 6.50/5.40

12.0

0.84

6.4

400

343

96002310

APLD.100.61/400

3 x 400

7.50/6.10

13.6

0.83

5.7

400

343

96002311

APLD.100.24/400-2

3 x 400 3.00/2.40

5.9

0.79

6.2

800

350

96002312

APLD.100.32/400-2

3 x 400 4.00/3.20

7.5

0.84

6.0

800

362

96002313

APLD.100.45/400-2

3 x 400

5.50/4.50

10.6

0.84

6.0

800

376

96002314

APLD.100.54/400-2

3 x 400 6.50/5.40

12.0

0.84

6.4

800

398

96002315

APLD.100.61/400-2

3 x 400

13.6

0.83

5.7

800

398

96002316

Min. flow with pressure pipe DN 100

APLD.80.09/400

14 12

APLD.80.13/400 AP L(D )80 .19 /

8

APLD.80.19/400 40

Voltage

P1/ P2 [kW]

IN [A]

AP L(D )80 .13 /4 AP 00 L(D ) AP 80 L(D .24 )80 /40 .09 0 /4 00

4 2

Parallel coupling of three tanks 0 0

25

0

H [m]

5

50 10

IStart/ IN

3 x 230

1.20/0.90

4,5

0.70

4.8

3 x 400 1.20/0.90

2.6

0.70

3 x 230

1.70/1.30

5.8

3 x 400

1.70/1.30

3 x 230

Tank volume [l]

0

APLD.80.24/400 6

Cos ö

Weight [kg]

Multilift APLD

16

Parallel coupling of tanks

If three tanks are coupled in parallel, the DN 150 inlet pipe must always be connected to the third tank. In order to avoid sedimentation, this tank must be without a pump to act both as a collecting tank and as a through-flow tank.

Multilift Stations APL(D)80, 50 Hz

Min. flow with pressure pipe DN 80

10

Flexible connections are included with the systems to facilitate connection of two or three tanks in parallel. This is effexted through the DN 150 connections at the top and bottom on both sides of the tank, and provides a total tank volume of 800 or 1200 litres respectively.

Electrical data, type designation and product numbers

100 Q [m3/h]

75

15

20

25

Q [l/s]

Multilift Stations APL(D)100, 50 Hz

Min. flow with pressure pipe DN 100

7.50/6.10

22 Min. flow with pressure pipe DN 150

20 18 16 AP L(D )

10 0.6 1/4 AP L(D 00 )10 AP 0.5 L(D 4/ 4 )10 0.4 00 5/4 00 AP L(D )10 0.3 2/4 AP 00 L(D )10 0.2 4/ 40 0

14 12 10 8 6 4 Parallel coupling of three tanks.

The third tank must be ordered separately as an accessory. It is supplied with all the necessary flexible connections, clamps and anchor bolts.

2 0 0 0

50 5

10

15

100 20

25

30

Q [m3/h]

150 35

40

45

Q [l/s] APLD, single 400-litre tank.

20

Multilift Station APLD Performance

>

21

APLD, two 400-litre tanks connected in parallel.

Multilift Station APLD Technical Data

>

Grundfos Multilift Station APLD – 400 l tanks

Installation

Dimensions

The numbers on the drawing refer to the accessories overview, page 25/26.

Multilift Stations APLD

Dimensions in mm Pump type

A

C

D

E

F

G

H

K

AP70

1814

536

380

DN 80

260

180

820

90

AP100

2062

784

465

DN 100

300

190

955

123

Type key Example APL D .100 Type range With two pumps Nominal diameter (mm) of discharge port (AP70) Power output P2/100 [W] Two 400-litre tanks

System with 2 pumps and 3 tanks

.24

/400-2

All pipe connections to the Multilift station must be carried out with noise-absorbing flexible connections, and all pipes in connection with the lifting station must be supported in such a way that they do not stress the station.

22

Multilift Station APLD Installation

>

23

Multilift Station APLD Dimensions

>

Grundfos Controller LCD 103

The LCD 103 level controller features a pneumatic-

Accessories

The level sensor is factory set to stop the system before air enters the pumps.

ally operated level sensor, motor protection and monitoring of pump operation. The controller is designed for wall mounting.

A range of accessories is available for the Grundfos Lifting Stations. The accessories must be ordered separately.

Levels APLD

Start level 2

Alarm level

200 l

220 l

260 l

Pos 1

In addition to the indicator lights, the following functions are available on the controller front: The operating conditions (pump failure, highlevel alarm, phase sequence, and operation) are indicated by indicator lights on the front cover. An acoustic alarm can be given in case of system failure. Furthermore, an external alarm device can be connected to a potentialfree NO-contact.

Pump type

Accessories Start level 1

2

• Function selector with positions: Man, 0 and Aut • On/off switch for built-in acoustic alarm • Reset button for motor starter

3

The LCD 103 controller automatically ensures an even distribution of operating hours on both pumps by changing the starting sequence after each pump stop (alternation).

4

A back-up accumulator maintaining the alarm signal in case of supply failure is available as an accessory. The accumulator ensures that an alarm can be given within 15 hours after the electricity supply has been switched off.

Picture

Description Flanged socket for PVC pipe

Dimensions

•

DN 100

•

•

96 00 20 12

DN 150

•

•

96 00 34 27

DN80

•

96 00 20 09

DN100

•

96 00 20 85

96 47 78 93

1"

• • • • • • • • • • • • •

96 00 01 88

11/2”

•

96 00 37 21

DN 80/80

• • • •

96 00 37 04

Bolts, nuts and gasket, 8 of each 16 x 65mm

DN 100

Bolts, nuts and gasket, 8 of each 20 x 75mm

DN 150

Isolating valve

DN 80/100 Flange/hose unit DN 100/100 DN 150/150 Ø53 Ø75 6

Flexible connecting piece Ø110 Ø160 Ø53 Ø75

7

Clamp Ø110 Ø160

8

Manually operated diaphragm pump

DN 80/100 9

Breeches pipe

DN 100/100 DN 100/150

24

Multilift Station APLD Controller

>

25

Product number

DN 80

DN 80

DN 80/80

5

APLD

• • • • •

DN 150

Bolts, nuts and gasket, 8 of each 16 x 65mm

Non return valve cast iron ball-type PN10

M/MD

• •

• • • • • • • • • • • •

96 00 37 01 96 00 19 99 96 00 38 23 96 00 36 05 96 00 20 11

96 07 53 63 96 47 78 94 96 47 78 95 96 47 29 43 96 07 54 23 96 07 54 22 96 47 30 60 96 07 54 27 96 07 54 26 96 07 54 25 96 47 30 61

96 00 37 05 96 00 37 06 96 00 37 07

Accessories

>

The Grundfos wastewater range

Accessories

Pump type

Accessories Pos 10

11

Picture

Description

Dimensions

APLD

•

Cover plate

Extra tank number 3 incl. two flexible connections, clamps and anchor bolts

M/MD

96 47 78 96

•

400 l

Submersible sewage grinder pumps

Heavy-duty submersible sewage pumps 1.65 - 29 kW

Brochure covers the new Grundfos range of sewage grinder pumps (SEG) for pumping of wastewater with toilet discharge.

Brochure covers the Grundfos range of submersible channel-impeller pumps from 1.65 kW up to 21 kW and SuperVortex pumps up to 29 kW. All designed for handling unscreened raw sewage.

Product number

96 00 37 18

Heavy-duty submersible sewage pumps 15 - 155 kW 12

13

14

15

16

17

Accumulator for controller, 9.6 V

•

Signal lamp

•

Portable dewatering pumps

62 50 00 20

•

•

62 50 00 22

Outdoors

•

•

62 50 00 21

230 V

•

Brochure covers the Grundfos range of portable dewatering pumps (DW) from 0.8 kW to 20 kW for pumping raw water with abrasives.

Signal horn

Hour counter

•

96 00 25 15

230 V

•

96 00 25 16

Brochure covers the Grundfos range of super-heavy-duty channel pumps, axial flow pumps, and propeller pumps from 7.5 kW up to 520 kW.

The KP/AP stainless steel range Brochure covers a wide range of high quality stainless steel pumps for a variety of domestic and commercial applications.

Stainless steel heavy-duty submersible pumps

96 00 25 14

400 V

Brochure covers the Grundfos range of heavy-duty stainless steel pumps (SEN) for aggressive and corrosive environments.

LC/LCD level controllers Brochure covers the Grundfos range of controls for the wastewater pumping systems.

Mixers and flowmakers

Start counter 400 V

•

96 00 25 17

230 V

•

96 00 25 18

400 V

•

96 00 25 19

25 A

• •

Brochure covers the new range of mixers and flowmakers for optimal control of liquids and solids throughout the wastewater treatment process.

Combined hour and start counter

• •

96 00 25 12

•

96 00 25 13

96 00 25 11

External main switch for supply cable 80 A

26

•

Indoors

40 A 18

Brochure covers the Grundfos range of sewage pumps from 15 kW up to 155 kW for handling of raw sewage in heavy-duty applications.

96 00 25 20

Super-heavy-duty submersible sewage and raw water pumps

Accessories

>

27

The range

>