LEVEL MEASUREMENT for BULK SOLIDS & LIQUIDS • Point

Level • Profile Scanning • Inventory Control

• Continuous • Weight

• Wireless

CUSTOM ENGINEERING & INTEGRATION SOLUTIONS

Continuous Level Measurement for Solids Aysix Silo Weigh Strain Cells Turn your silo in to a scale. Aysix Silo Weigh strain cells are non-intrusive, bolt-on, fully temperaturecompensated, reliable, repeatable, accurate and continuous sensors for weight and level measurement in silos. They clamp on the outside of a silo leg or beam support and measure the deflection in microns that will vary with the product weight. • Complete silo weight/level measuring solution • Intelligent electronics that provide direct weight or level measurement • Easy bolt on installation • System accuracy of 2% FS for silo weight measurement • Perfect alternative to load cells • No need to lift silo, bolts directly on the side of the leg of a silo

BinMaster 3DLevelScanner The BinMaster 3DLevelScanner uses non-contact, dust-penetrating technology to provide unsurpassed bin volume accuracy. Unlike single point devices, it works by measuring multiple points within the bin. Its unique 3D mapping capabilities provide a visual representation of bin contents, detecting cone up or down as well as sidewall build up. • Dust-Penetrating Technology: The acoustical-based, low frequency technology is unaffected by dust • Multiple Point Accuracy: Taking measurements from multiple points versus a single point takes into account variations that can occur on material surfaces • Non-Contact Measurements: Appropriate for foods, chemicals and pharmaceuticals as there is no risk of moving parts coming into contact with bin material • 3 dimensional graphic display of silo level profile • True volume reading, even in very large silos

Bin Master Smart Bob II Level The Bin Master SmartBob II cable displacement (yoyo) sensor is a rugged as well as an economical and compact inventory tracking system that has been designed to measure solids and powders in silos and tanks. The powerful and robust design of the SmartBob II provides years of maintenance-free service in vessels up to 180 feet. • Measures solids, powders, slurries and liquids • Approved for hazardous locations • No field calibration or adjustment • Trouble free mounting and installation • Minimal contact with stored material

Nivelco TDR Guided Wave Radar The Micro TREK guided microwave level transmitter is designed for continuous measurement of conductive and non conductive liquids, pulps and solids. The Micro TREK level gauge operates on the well known TDR (Time Domain Reflectrometry) principle. Typical applications will include cement, limestone, fly ash, alumina, carbon black, mineral powders, free flowing solids. • Universal device that can measure level of liquids, pastes, granulates, powders, and liquid interface • Easy to install: onsite calibration is not needed • Optional second current output - used for displaying interface measurements. • Measuring range up to 24 meters.

Level Switches & Accesories for Bulk Powders Bin Master BMRX Rotary Level Switch Bin Master rotary switches offer a cost effective means to prevent bin overflows. The BMRX and MAXIMA+ feature low power consumption, "de-engergized" operation - which shuts down the motor when material is present - and automatic alerts to power failure. Many configurations, paddles etc. are available to handle most applications.

Bin Master Capacitance Level Switch Bin Master PROCAP I & II capacitance probes offer interference-free, fail-safe operation & "Quick-Set" calibration. These capacitance sensors are used for high and low level detection in bins, silos, tanks, hoppers, chutes and other vessels used for material storage or process manufacturing. Many probe configurations, materials and lengths are available to handle most applications.

Bin Master Vibrating Probe Level Switch Bin Master provides a variety of vibrating rods to offer side and top-mount flexibility for high, low and mid-level configurations. They are available in standard, extended length, high temperature and mini models. They may be side or top mounted.

Aysix Radartronj Moisture Sensor The RadarTron accuratly measures the moisture content of fine aggregates such as sand and crushed stone. RadarTrons microwave technology eleim inates the errors associated with resistance and capacitance technolgies guaranteeing an accurate reading everytime. It is easily installed in any Bin wall and is suitable for digital display or interface with a PLC.

BinMaster Particulate Monitor

The BM-30 LX is a particulate monitoring device designed for general process and environmental monitoring of dust particulates for baghouse filter leak detection, process particulate flow monitoring and continuous emissions monitoring. Particulate monitoring helps companies meet regulatory requirements by detecting leaks before emissions are visible.

Continuous "Non Contact" Level Measurement for Liquids Nivelco Non Contact Radar The Nivelco 24 GHz (K-band) PiloTREK Pulse Radar gauges are regarded the most progressive non-contact level transmitters of the industrial process automation field. Their accuracies are excellent and their short and narrow antennas make their installation simple and low cost. NIVELCO’s new K-band radar featuring ±3 mm (0.12 inch) accuracy and short dead band excels with its versatile housing concept lining up plastic, aluminium and stainless steel versions. • 2-wire K-band Pulse Burst Radar • 23 metre (75 feet) measuring range for liquids and slurries • Easy installation due to small antennas • System accuracy of ± 3 mm (0.12 inch) accuracy • Horn and enclosed antenna types • High temperature version

Nivelco Non Contact Compact Ultrasonic Sensors EchoTREK ultrasonic transmitters offer the best in liquid level measurement in a compact simple package. Developed using the established SenSonic range of narrow beam angle pulse echo transducers, EchoTREK units are available with measurement ranges up to 25 meters - with standard plastic, PTFE or stainless steel sensor faces. Installed on the tank roof, or above the liquid level surface to be measured, the transmitter gives an analogue output proportional to liquid level. • Non-contact level metering-wire • 2- or 4-wire compact transmitter • Easy installation due to small antennas • Narrow 5° beam angle • PP, PVDF, PTFE, stainless steel or foam faced transducers • Optional switching relay

Nivelco Non Contact Integrated Ultrasonic Sensor The Bin Master SmartBob II cable displacement (yoyo) sensor is a rugged as well as an economical and compact inventory tracking system that has been designed to measure solids and powders in silos and tanks. The powerful and robust design of the SmartBob II provides years of maintenance-free service in vessels up to 180 feet. • Measures solids, powders, slurries and liquids • Approved for hazardous locations • No field calibration or adjustment • Trouble free mounting and installation • Minimal contact with stored material

Continuous "Contact" Level Measurement for Liquids Nivelco Magnetorestrictive NIVOTRACK magnetostrictive transmitters are an ideal solution for high accuracy measurement of clean fluids. Its high precision renders the NIVOTRACK suitable for custody transfer measurement of liquids such as fuels, solvents, alcohol derivatives etc.

• 0.1 mm or 1 mm resolution • Rigid or flexible guide tube • Insertion length maximum 15 m •Plastic coated version for chemicals •4-20 mA and HART output • 99 point linearization table •Custody transfer measurement

Nivelco Hydrostatic Pressure Sensors NIVOPRESS DT series is a 2-wire microprocessor controlled pressure and level gauge. The loop powered transmitter can be converted into indicator by the use of the plug in display module. The unit measures the hydrostatic pressure and for level gauging it compares the water head with the actual atmospheric pressure. The piezoresistive sensor is protected by a flush diaphragm with silicon oil between the two for pressure transfer.

• Non-contact level metering-wire • 2- wire compact transmitter • Measuring range: 1.45-5800 psig, -14.5 psig • Scalable analogue output • Wide variety of process connection • High accuracy