LED MODULE SMD SERIES

ADS-663F-50G

Products description:

1. ADS-663F-50G is made of ABS plastic housing and PCB, lens and gray two fight lines (high temperature cold and UV resistance) combination, with 3PCS 5050 white SMD LED 2. 5050LED light Viewing is large and uniform ,without shadows, high brightness, low thermal resistance, low light decay, can work well in harsh environments. 3. The products are mainly used in architectural lighting, signal lighting and backlighting for labeling. 4. This product can be cascaded up to 20PCS modules, non-super-series.

ADS-663F-50Gsingle color led module Parameter：

Voltage: DC12V Power: 0.72W Working Temp: -40-60℃ IP Grade: IP68 Dimensions: 66*16*6.6MM

ADS-663F-50

Product Feature:

1, ADS-663F-50 is combined with ABS plastic shell, PCB plate, lens and gray & white wires (thermo stability, cold-resistant, resistant to UV). 2, It contains 3pcs 5050smd with pure white (red color, green color, blue color and yellow color) 3, With 3pcs 5050 SMD LED, with large viewing angle, no shadow, low thermal resistance, low brightness declines. Working efficiently under the harsh environment. 4, Suitable for building decoration, signal lighting and light boxes backlighting etc. 5, This module can be linked up to 20pcs at max, more than 20pcs is strictly prohibited.

ADS-663F-50 single color module parameter:

Working Voltage:

DC12V

Power: 0.72w Working Temperature: -40 ~60 ℃ IP Grade:

IP68

ADS-492F-50

Products Description：

1. ADS-492F-50 is made up of ABS plastic shell & PCB board & lens & grey and white wire (high temperature resistant, cold resistant, UV resistant). Contains 2PCS 5050 natural white SMD LED 2. Products are mainly used in building decorative lighting and backlighting for labeling.

ADS-492F-50 Single Color led module：

Working voltage: DC12V Power: 0.48W Working temperature: -40 --60℃ IP Grade: Dimension:

IP68 49*15*4.3MM

ADS3810-3

ADS-803F

Detailed introduction 1.ADS -803F-28 series module used ABS plastic shell, PCB plate and white & grey wires (thermo stability, cold-resistant, resistant to UV) 2.Whith 3pcs SMD 2835LED (can be white/red/green/blue/yellow color ,with large ADB uniform angle, no shadow, low thermal resistance, low brightness declines. 3, work efficiently under the harsh environment. Energy saving, environment-friendly, Long life span for 50,000hrs. 4, Suitable for channel

letters and light boxes back lighting, big logo.

ADS-803F-28 parameter:

Voltage: DC12V Power: 0.72w Temperature: -40 ~60℃ IP Grade: IP68 Dimension: 80*14.5*4.3mm

ADS-502F

Detailed introduction ADS-502F-28 is made by ABS Plastic housing and PCB board , Lens and gray white 2 cables. Z temperature, cold resistance, anti-UV) 3pcs 2835SMD Natural white Led. (also can make other color, like Red, green, Blue ,Yellow color. 2835 Led with large beam angle and no shadow. High brightness, Low thermal resistance, low light decay, Can work well in hard environments.

Working Voltage: Power:

DC12V

0.72W

Working temperature:

-40 ~60 ℃

IP Grade:

IP68

Dimension:

50*15*4.3mm

ADS-803AF-57

Detailed introduction ADS-803AF-57 series:

1. ADS-803AF-57 series module used ABS plastic shell, PCB plate, PC lens and white & grey wires (thermo stability, cold-resistant, resistant to UV) 2. With which 3pcs SMD 5730LED (with large ADB uniform angle, no shadow, low thermal resistance, low brightness declines. 3, work efficiently under the harsh environment. Energy saving, environment-friendly, long life span for 50,000hrs.

4, Suitable for channel

letters and light boxes back lighting, big logo.

5,This module can be linked up to 20pcs at max, more than 20pcs is strictly prohibited.

ADS-803AF-57 parameter：

Voltage: DC12V Power: 1.2w Temperature: -40-60℃ IP Grade: IP68 Dimension: 80*15.8*4.8mm

ADS-75122-5630

ADS-1810

Super flux Series

ADS-S753

ADS-S334

RGB series

ADS-323ICRGB

ADS-3810-3RGB

ADS-75153RGB

ADS-C759RGB

Remark: 1. LED modules should be stored in the dry sealed package 2. Please use this product with 12V DC. 3. Don't push and no scratch on the surface of the LED 4. Recommended length for installation is 20 pcs, and no more than 6meter avoiding the voltage dropping. 5. Calculate the power consumption before install the modules.

Customer made item: *Some item may have different cover/shell, customer-made logo, customer-made wire color and length is available. Please contact us for more detail information. *Single color products only need power supply, please take notice of the input voltage (AC110/AC220) and output (DC 5V/DC12V/DC24V). RGB products need power supply and RGB controller may be also need Power amplifier. RGB with IC products (full color pixel series) need power supply and Full color controller, please take notice of the IC type and Signal line definition. If you have DMX & Madrix, DMX decoder is a must. Please check Controller webpage for your reference.

ADS-IC324

Certification: CE & RoHS *Specification subject to change without notice

Remark: 1. LED modules should be stored in the dry sealed package 2. Please use this product with 12V DC. 3. Don't push and no scratch on the surface of the LED 4. Recommended length for installation is 20 pcs, and no more than 6meter avoiding the voltage dropping. 5. Calculate the power consumption before install the modules.

Customer made item: *Some item may have different cover/shell, customer-made logo ,customer-made wire color and length is available. Please contact us for more detail information.

*Single color products only need power supply, please take notice of the input voltage (AC110/AC220) and output(DC 5V/DC12V/DC24V). RGB products need power supply and RGB controller, maybe Power amplifier also. RGB with IC products ( full color pixel series) need power supply and Full color controller, please take notice of the IC type and Signal line definition. If you have DMX & Madrix, DMX decoder is a must. Please check Controller webpage for your reference.

ADS-IC759

Remark: 1. LED modules should be stored in the dry sealed package 2. Please use this product with 12V DC. 3. Don't push and no scratch on the surface of the LED 4. Recommended length for installation is 20 pcs, and no more than 6meter avoiding the voltage dropping. 5. Calculate the power consumption before install the modules.

Customer made item: *Some item may have different cover/shell, customer-made logo ,customer-made wire color and length is available. Please contact us for more detail information.

*Single color products only need power supply, please take notice of the input voltage (AC110/AC220) and output (DC 5V/DC12V/DC24V). RGB products need power supply and RGB controller, maybe Power amplifier also. RGB with IC products ( full color pixel series) need power supply and Full color controller, please take notice of the IC type and Signal line definition. If you have DMX & Madrix, DMX decoder is a must. Please check Controller webpage for your reference

ADS-IT753

Certification: CE & RoHS *Specification subject to change without notice