LED - LAMPS AND LIGHTS
GERMAN MANUFAC TURER OF LED - LAMPS & LIGHTS
LED
LED
LED -Lighting for every Application LED stands for Light Emitting Diode, but for us it stands for: Light Efficiently Defined
We are manufacturer of LED lamps and lights since 1995. Our headquarters are in Hamburg, Germany and have many years of experience in designing and manufacturing LED products as a registered manufacturer under the European “WEEE” legislation for LED products. With our selected product portfolio, we endeavour to offer products of distinguished quality, aesthetically pleasing, reliable performance and good value for money.
Consulting. – We advise on “lighting with LED technology“ and always take customer requirements into account.
Profitability. – We determine potential savings and compute the profitability of LED investment.
Lighting concepts. - LED lighting concepts are developed and visualized for the required applications.
What we can do for you. – Our catalogue shows our range of products - exclusively selected. However, if you cannot find lighting techniques you are looking for, please talk us. Through continuous innovation, this may appear only in subsequent catalogues. Find constant updates on our website and visit it regularly: www.arteko-led.com.
Lighting design. - We ensure that ARTEKO® LED lighting products always fulfil applicable standards and directives (in particular the workplace guidelines) and provide customers with an objective proof of effectiveness. Light laboratory. - The most modern light laboratory enables ARTEKO® to provide the highest standards and quality for long-term benefit to our customers.
Do you want to see the applications of LED personally? Call us, to make an appointment or visit our showrooms:
CO N TAC T US: Hamburg: +49 40 8990 9150 Bahrain: +973 3636 3428 Johannesburg: +27 10 237 0052
Example: Industry (AW Niemeyer, Hamburg, Germany)
Example Retail (BoConcept, Hamburg, Germany, Am Fischmarkt)
LED technology has been developed to replace conventional lighting products. The advantages of using LED technology are numerous, for example, it‘s long life-span, significant energy & cost savings, creates only little to no heat. LED technology is now available for almost every type of application and fitting, including tubes.
...... Benefit from the Advantages of LED! Benefits: Energy and Cost savings • Up to 90% energy saving. • LED chip life of about >50,000 operating hours which results in reduced replacement costs. • Cool operation with reduced air conditioning costs. • Low maintenance costs and highly recyclable. Benefits: Security • Improved fire safety – cool operating. • Voltage fluctuations between 85-265V are allowed. • Safety standard class up to IP68. Benefits: Health • No harmful UV light. • No harmful IR light. • No humming, shimmer and flickering. • No dangerous gases or mercury content.
Benefits: Environment • 100% recyclable. • No hazardous or special waste. Advantages of using LED • 100% Luminosity and high colour rendering of illumi nated objects. • In excess of 1 million cycles. • Vibration proof. • Dust and waterproof. • LED attracts 50% less insects. • Five years guarantee (unless otherwise stated)
Products
Page
General Purpose Bulbs 4-5 Spotlights 6-7 Tracklights 8-9 Downlights 10-12 Show Case Lamps 13 Wall Lamps 14-15 Table and Reading 16-17 Ceiling Lamps 18-19 Floor Lamps 20 Pin Base Lamps 21 Micro Modules 22 Modules 23 Strip Lights 24 In Line Lamps 25 Tubes 26-27 Outdoor Lamps 28-29 Flood & Spotlights 30-31 Special Lamps 32 High Bay Lamps 33 Street Lamps 34-35 LED Benefits 36 EU Energy Efficiency Program 37 Lighting Terms made easy! 38-39 LED
* The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/
3
General-Purpose Bulbs LED-Bulb LED-Filament technology. Pleasant and warm illumination. Available with clear glass. Suitable for all luminaires in which the classic light bulb found its place.
Product Details* • Chip: LED-Filament • 4-8 Watt ±10% • 430-780 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 2700 K • Beam angle: 360º • Base: E27
“The bulb is back – in good old shape!“
... more General-Purpose Bulbs
cu rr LED-Bulb Candle
Chip LED-Filament. Pleasant and warm illumination. Available with clear glass. Suitable for all luminaires in which the classic light bulb found its place.
Product Details*
• LED-Filament technology • 2-3 Watt ±10% • 180-280 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 2700 K • Beam angle: 360º • Base: E14
4
ly ent
il ava no t
ab l e
Bulb Corn
General-purpose bulb for outdoor or industrial applications. LED Driver: internal.
Product Details*
• SMD-Chip • 6-13 Watt ±10% • 470-1000 Lumen • Colour Rendering Index: RA>65 • Light Colour/s: 3250 K, 4250 K • Beam angle: 360º • Base: E27
Bulb U-Line
Based on the technology of ARTEKO® LED tube S2. Optimized driver cooling due to the central location in the centre of the light elements. General-purpose bulb for all applications. LED Driver: internal.
Product Details*
• SMD-Chip • 9-20 Watt ±10% • 700-1700 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3150 K, 4150 K, 6250 K • Beam angle: 360º • Base: E27
LED * The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/
Lamp: Gerd Dieckhoff Design
LED
5
Spotlights Spotlight AR 111-R Glare free illumination due to “upside down“-mounted LED-Chip. Perfect for Hotels, Hospitality and Retail applications. LED-Driver: internal for 12 Volt, external for 15V / 38V.
Product Details* • Sharp-Chip • 10-14,8 Watt ±10% • 500-800 Lumen / 4200-6000 cd • Colour Rendering Index: RA>80 • Light Colour/s: 2700 K • Beam angle: 24º • Base: G53 • Dimmable only with external Driver
“Spotlights - to highlight objects.“ “Alsterkrug Hotel” in Hamburg, Germany
... more Spotlights
Spotlight SP 6 g
With Mounting Ring and stable mounting springs. Tilts up to 30 °. Perfect for Hotels, Hospitality and Retail applications.
Spotlight SP 6 h
Finely crafted with a very accurate reflector layer. The visual appearance is similar to that of traditional halogen MR16 spot.
LED Driver: external.
Perfect for Hotels, Hospitality and Retail applications.
Product Details*
LED Driver: external.
• Sharp MOB-Chip • 10-11 Watt ±10% • 560-615 Lumen • Colour Rendering Index: RA>80, RA>90, RA>95 • Light Colour/s: 2700 K, 3000 K, 4000 K • Beam angle: 24º, 38º, 60º • Dimmable with external Driver
6
Product Details*
• Sharp MOB-Chip • 8-11 Watt ±10% • 340-615 Lumen • Colour Rendering Index: RA>80, RA>90, RA>95 • Light Colour/s: 2700 K, 3000 K, 4000 K • Beam angle: 24º, 38º, 60º • Dimmable with external Driver
Spotlight SP 6 i
Finely crafted with a very accurate reflector layer. The visual appearance is similar to that of traditional halogen MR16 spot. With different mounting rings. Perfect for Hotels, Hospitality and Retail applications. LED Driver: external.
Product Details*
• Sharp MOB-Chip • 8,5 Watt ±10% • 700-770 Lumen • Colour Rendering Index: RA>80, RA>90, • Light Colour/s: 2700 K, 3000 K, 4000 K • Beam angle: 24º, 38º, 60º • Dimmable with external Driver
Spotlight SP 8 retrofit
Made to operate with HalogenDriver-Systems. Simply replace Perfect for Hotels, Hospitality and Retail applications.
Spotlight PAR IP 65
Perfect for exterior application, due to it‘s IP65 rating. Available as PAR 20, PAR 30 and PAR 38.
LED Driver: external.
Perfect for landscape, parks or general Purpose exterior illumination.
Product Details*
LED Driver: internal.
• Cree-Chip • 5,5 Watt ±10% • 370 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 2700 K, 3000 K, 4000 K • Beam angle: 38º, 60º • Base: GU5,3 • Dimmable with external Driver
Product Details*
• Cree-Chip • 5-18 Watt ±10% • 380-1300 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 2850 K, 3250 K, 4250 K, 6250 K • Beam angle: 30º • Base: E27 • Some models are dimmable
LED * The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/
LED
7
Tracklights
Tracklight TR 15 Standard For 3-Phase-Rail Systems. Horizontally by 350º and tilts vertically by ±90º.
Product Details* • Bridgelux -Chip • 32 Watt ±10% • 3450 Lumen • Colour Rendering Index: RA>80 / RA>90 / RA>97 • Light Colour/s: 2700 K, 3000 K, 4200 K • Beam angle: 16º, 30º, 38º
Made to replace CDM-T-Lamps. Perfect for Shop and Retail applications. LED Driver: external (built into the case).
“E. von Daniels Concept Store“ – Schützenstraße 21, Hamburg
“Tracklights are very flexible. Changing products – sustainable and perfectly highlighted.“ ... more Tracklights
Tracklight TR 1
For 3-Phase-Rail-Systems. Horizontally by 350º and tilts vertically by ±90º.
Tracklight TR 2
Made to replace CDM-T lamps.
For 3-Phase-Rail-Systems. Horizontally by 350º and tilts vertically by ±170º. Available with horizontal or vertical case.
Perfect for Shops and Retail applications.
Perfect for Shops and Retail applications.
LED Driver: external (built into the case).
LED Driver: external (built into the case).
Product Details*
Product Details*
• Bridgelux- or OSRAM-Chip • 16,5-34 Watt ±10% • 1950-4100 Lumen • Colour Rendering Index: RA>80 / RA>90 • Light Colour/s: 2700 K, 3000 K, 4000 K • Beam angle: 16º, 17º, 24º, 29º • Optional dimmable
8
• Bridgelux RS- or OSRAM Chip • 34 Watt ±10% • 4100 Lumen • Colour Rendering Index: RA>80 / RA>90 • Light Colour/s: 2700 K, 3000 K, 4200 K • Beam angle: 17º, 29º • Optional dimmable.
Tracklight TR 10
Available with clear or matt glass. Perfect for Galleries, Museums, Hotels and Hospitality. LED Driver: external (built into the case).
Product Details*
• Epistar-Chip • 15 Watt ±10% • 1250 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4200 K, 6400 K • Beam angle: 100º • Optional dimmable
Tracklight TR 14
Standard
For 3-Phase-Rail-Systems. Horizontally by 350º and tilts vertically by ±45º. With AC or DC Chip. Made to replace CDM-T-lamps. Perfect for Shops and Retail applications. LED Driver: external (built into the case).
Product Details*
• OSRAM Prevaled-Chip • 13-25 Watt ±10% • 760-2050 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 2700 K, 3000 K, 4000 K • Beam angle: 24º • Dimmable with DC Chip
Tracklight TR 15 Food
Similar to TR 15, but perfectly tailored for the Food-Sector to illuminate Vegetables, Fruits and Meat Products. Colour spectrum specifically developed for food presentation. Four different Chip-Versions available. Perfect for Food-Sector & Supermarkets. LED Driver: external (built into the case).
Product Details*
• Tridonic STARK SLE GEN3-19 • 30 Watt ±10% • 1700-2490 Lumen • Beam angle: 15º
LED * The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/
Tracklight TR 20
Tracklight TR Multi
Perfect for Shops and Retail applications.
Horizontally by 350º and tilts vertically by ±178º.
LED Driver: internal.
Fixing of spot with Top-Ring (screw able ).
For 3-Phase-Rail-Systems. Horizontally by 350º and tilts vertically by ±120º.
Product Details*
• Bridgelux or OSRAM Chip • 32 Watt ±10% • 3750 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 2700 K, 3000 K, 4000 K • Beam angle: 12º, 24º, 36º, 60º • Optional dimmable.
The LED-Multitrack-Case can be equipped with all MR16 LEDSpotlights.
LED Driver: for GU10-Base Models included. Also available with GU5, 3-base.
Tracklight TR Museums
Tracklight Rail-System
Very pleasing illumination, hence perfectly suited for Museums.
Accessories: Fasteners to design extensive Track Light RailSystems.
Available in 4 different RALColours.
LED Driver: external (built into the case).
Suitable for Surface- (MK) or recessed (MR) mounting.
Product Details*
• Sharp-Chip • 7,5-15,5 Watt ±10% • 870 Lumen • Colour Rendering Index: RA>93 • Light Colour/s: 2700 K, 3000 K, 4200 K • Beam angle: 16º-22º infinitely variable • Dimmable on track spotlight
LED
9
Downlights Downlight DL 1 Standard Available as rotating, tilting or fixed model. Be equipped with two different reflectors. Perfect for Hotels, Hospitality and Retail applications. LED Driver: AC Model internal, DC Model external.
Product Details* • OSRAM Prevaled-Chip • 13-25 Watt ±10% • 800-2000 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 2700 K, 3000 K, 4000 K • Beam angle: 12º, 29º, 46º • Optional dimmable
Downlight DL 2 Standard Fixed Downlight with matt aluminium reflector.
Product Details* • OSRAM Prevaled Cube AC Chip • 13-40 Watt ±10% • 1050-3160 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K • Beam angle: 44º • Optional dimmable
Perfect for Hotels, Hospitality and Retail applications. LED Driver: AC Model internal, DC Model external.
“Casa delle scarpe” – „Elbe-Einkaufs-Zentrum“ (Mall), Hamburg
Available also as Model DL 1 Food Perfect food sector for the illumination of vegetables, fruit and meat.
“Downlights are characterized by their dynamic light accentuation.“
... more Downlights
Downlight DL 3
Downlight DL 4
Perfect for Retail applications, Hotels and Hospitality applications.
Perfect for Retail applications, Hotels and Hospitality applications.
LED Driver: external.
LED Driver: AC Model internal, DC Model external.
Horizontal 360º and vertical tilts by 55°. Facet reflector.
Product Details*
• OSRAM or Bridgelux Chip • 31 Watt ±10% • 3450 Lumen • Colour Rendering Index: RA>80, RA>90 • Light Colour/s: 2700 K, 3000 K, 4000 K, 6400 K • Beam angle: 12º, 29º • Optional dimmable
10
Standard
Standardized 6”-Format, fixed, with matt Aluminium reflector.
Product Details*
• OSRAM Prevaled Cube AC Chip • 13-26 Watt ±10% • 1050-2080 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K • Beam angle: 96º • Optional dimmable
Downlight DL 4 aP
Standard downlight, fixed, with matt Aluminium reflector. For surface mounting. Perfect for Retail applications, Hotels and Hospitality applications. LED Driver: AC Model internal, DC Model external.
Product Details*
• OSRAM Prevaled Cube AC Chip • 13-26 Watt ±10% • 1050-2000 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K • Beam angle: 96º • Optional dimmable
Downlight DL 5
Standard
Standardiized 8”-Format, fixed, with matt Aluminium reflector. Perfect for Retail applications, Hotels and Hospitality applications. LED Driver: AC Model internal, DC Model external.
Product Details*
• OSRAM Prevaled Cube AC Chip • 13-40 Watt ±10% • 1050-3160 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K • Beam angle: 110º • Optional dimmable
Downlight DL 6
Standard
With Aluminium reflector. Perfect for Retail applications, Hotels and Hospitality applications. LED Driver: AC Model internal.
Product Details*
• OSRAM Prevaled Cube AC Chip • 13-40 Watt ±10% • 1050-3160 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K • Beam angle: 110º • Optional dimmable
LED * The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/
Downlight DLa 1 /DLa 2
Round shape for installation in appropriate ceiling openings. Central Diffuser on the front glass. Available in five different housing Colours and with IP65 rating. Perfect for Retail applications, Hotels, Hospitality and Offices. LED Driver: external.
Product Details*
• Epistar MCOB-Chip. • 15-25 Watt ±10% • 1215-2025 Lumen • Colour Rendering Index: RA>75 • Light Colour/s: 3000 K, 4200 K, 6400 K • Beam angle: 45º, 58º • Optional dimmable
Downlight DLa 3
Downlight DLa 4
Perfect for Retail applications, Hotels, Hospitality and Offices.
Perfect for Retail applications, Hotels, Hospitality and Offices.
LED Driver: external.
LED Driver: external.
Product Details*
Product Details*
Rectangular in shape, tilted to the long axis. With central diffuser on the front glass. Available in five different housing Colours.
• Epistar MCOB-Chip. • 20 Watt ±10% • 1600 Lumen • Colour Rendering Index: RA>72 • Light Colour/s: 3000 K, 4200 K, 6400 K • Beam angle: 67º • Optional dimmable
Square in shape, fixed. With central diffuser on the front glass. Available in five different housing Colours.
• Epistar MCOB-Chip. • 20 Watt ±10% • 1600 Lumen • Colour Rendering Index: RA>85 • Light Colour/s: 3000 K, 4200 K, 6400 K • Beam angle: 48º • Optional dimmable
Downlight DLc 1
Downlight DLc 2.1
Perfect for Retail applications, Hotels, Hospitality and Offices.
Perfect for Retail applications, Hotels, Hospitality and Offices.
LED Driver: external.
LED Driver: external.
Product Details*
Product Details*
Horizontal and vertical tilts by 45°. Facet reflector. Available in three different housing Colours.
• Bridgelux- or OSRAM-Chip. • 34 Watt ±10% • 4100 Lumen • Colour Rendering Index: RA>80 / RA>90 • Light Colour/s: 2700 K, 3000 K, 4000 K • Beam angle: 17º, 29º • Optional dimmable
Cardanic suspension of the spotlight, Facet reflector. Available in three different housing Colours.
• Bridgelux- or OSRAM-Chip. • 34 Watt ±10% • 4100 Lumen • Colour Rendering Index: RA>80 / RA>90 • L ight Colour/s: 2700 K, 3000 K, 4000 K • Beam angle: 17º, 29º • Optional dimmable
LED 11
Downlights
Show Case Lamps Show Case Lamp VL 2 Filigree and slim design. This lamp is itself a work of art. Without being obtrusive, they can be positioned in the room or in the showcase, to light up watches, jewellery, small Art and Exhibition items or pictures. Adjustable single-LED directional beam head. Available in three different Colours. Perfect for the Retail applications sector, especially Jewellery.
Product Details* • CREE-Chip • 1 Watt ±10% • 70 Lumen • Colour Rendering Index: RA>80 / RA>90 • Light Colour/s: 2700 K, 3000 K, 4000 K, 6000 K • Beam angle: 20º, 40º, 60º • Optional dimmable
LED Driver: external.
“Show-case lamps are fine and elegant very small light emitters, but with great effect.“
“Betten Remstedt“ (Bedding) – Alsterdorfer Straße in Hamburg
... more Downlights
... more Show-Case Lamps
Show Case VL 1 Downlight DLc 2.2 / DLc 2.3
Alike DLc 2.1 but with two or three spotlights. Each radiator is separately cardanically suspended. Perfect for Retail applications, Hotels, Hospitality and Offices.
Downlight DLc 5
Horizontal rotates, tilts vertically. Available with two different chips. In three different housing Colours.
Downlight DLe 1
For ambient lighting. Available in three different dimensions and three different operating voltages.
Downlight DLe 2
For ambient lighting. Available in three different dimensions and three different operating voltages.
LED Driver: external.
Perfect for Retail, Clothing Shops, Hotels and Hospitality applications.
Perfect for Retail applications, Offices, Hospitals and public buildings.
Perfect for Retail applications, Offices, Hospitals and public buildings.
Product Details*
LED Driver: external.
LED Driver: external.
LED Driver: external.
Product Details*
Product Details*
Product Details*
• Bridgelux- or OSRAM-Chip. • 68 / 102 Watt ±10% • 8200 / 12300 Lumen • Colour Rendering Index: RA>80 / RA>90 • Light Colour/s: 2700 K, 3000 K, 4000 K • Beam angle: 17º, 29º • Optional dimmable
12
• Bridgelux or OSRAM-Chip. • 34 Watt ±10% • 4100 Lumen • Colour Rendering Index: RA>80, RA>90 • Light Colour/s: 2700 K, 3000 K, 4000 K • Beam angle: 17º, 29º • Optional dimmable
• 14-44 Watt ±10% • 1150-4600 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 2700 K, 3000 K, 4000 K • Beam angle: 65º, 70º, 73º • Optional dimmable
• 8-45 Watt ±10% • 660-4400 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 2700 K, 3000 K, 4000 K • Beam angle: 100º • Optional dimmable
LED * The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/
Filigree and slim design. Adjustable single-LED directional beam head. Available in three different colours. Perfect to illuminate Watches, Jewellery, small Art and Exhibition Items or Pictures. LED Driver: external.
Product Details*
• CREE-Chip • 3 Watt ±10% • 210 Lumen • Colour Rendering Index: RA>80, RA>90 • Light Colour/s: 2700 K, 3000 K, 4000 K, 6000 K • Beam angle: 20º, 40º • Optional dimmable
Show Case VL 4
Show Case VL 5
Perfect to illuminate Watches, Jewellery, small Art and Exhibition Items or Pictures.
Perfect to illuminate Watches, Jewellery, small Art and Exhibition Items or Pictures.
LED Driver: external.
LED Driver: external.
Product Details*
Product Details*
One head equipped with three spotlights. Adjustable LED directional beam head. Suitable for indoor use. Available in four different colours.
• CREE-Chip • 3x 1 Watt ±10% • 3x 70 Lumen • Colour Rendering Index: RA>80, RA>90 • Light Colour/s: 2700 K, 3000 K, 4000 K, 6000 K • Beam angle: 110º • Optional dimmable
One or two heads, with three spotlights. Adjustable LED directional beam head. Suitable for indoor use. Available in three different Colours.
• CREE-Chip • 3x 1 / 2x 3x 1 Watt ±10% • 105 / 210 Lumen • C olour Rendering Index: RA>80, RA>90 • L ight Colour/s: 2700 K, 3000 K, 4000 K, 6000 K • Beam angle: 75º • Optional dimmable
LED 13
Wall Lamps Wall Lamp WL 1 Square shape. A reflector creates a beautiful, down directed, soft light. With frosted security glass. In three housing colours. Suitable for stairwells, corridors, hallways and entrance areas. Optional also available with coloured LED bulbs in red, green, blue and amber.
Product Details* • CREE-Chip • 1 Watt ±10% • 100 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K, 6000 K and monochromatic Colours: red, green, blue, amber • IP20 rated
LED Driver: external.
“Wall Lamps provide safety and orientation in walking area.“ Wall Lamps in a driveway
... more Wall Lamps
Wall Lamp WL 2
Wall Lamp WL 3
Wall Lamp WL 4
Wall Lamp WL 5
Wall Lamp WL 6
Wall Lamp WL 7
Wall Lamp WL 8
Perfect for stairwells, corridors, hallways and entrance areas.
Perfect for stairwells, corridors, hallways and entrance areas.
Perfect for stairwells, corridors, hallways and entrance areas.
Perfect for stairwells, corridors, hallways and entrance areas.
Perfect for stairwells, corridors, hallways and entrance areas.
Perfect for stairwells, corridors, hallways and entrance areas.
Alternatively also available with coloured LED bulbs in red, green, blue and amber.
Alternatively also available with coloured LED bulbs in red, green, blue and amber.
Alternatively also available with coloured LED bulbs in red, green, blue and amber.
Alternatively also available with coloured LED bulbs in red, green, blue and amber.
Alternatively also available with Coloured LED bulbs in red, green, blue and amber.
Alternatively also available with Coloured LED bulbs in red, green, blue and amber.
Perfect for illuminating objects of art in Museums or for Hotels and restaurants.
LED Driver: external.
LED Driver: external.
LED Driver: external.
LED Driver: external.
LED Driver: external.
LED Driver: external.
Product Details*
Product Details*
Product Details*
Product Details*
Product Details*
Product Details*
Square in shape. Matt glass. Available in three housing colours.
• CREE-Chip • 1 Watt ±10% • 100 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K, 6000 K and in red, green, blue, amber • IP20 Rated
14
Square in shape. Matt glass. Available in three housing colours.
• CREE-Chip • 1 Watt ±10% • 100 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K, 6000 K and in red, green, blue, amber • IP44 Rated
Square in shape. Matt glass. Available in three housing colours.
• CREE-Chip • 1-3 Watt ±10% • 100-300 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K, 6000 K and in red, green, blue, amber • IP20 Rated
Elongated, rectangular in shape. Matt glass. Available in three housing colours.
• CREE-Chip • 1-3 Watt ±10% • 100-300 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K, 6000 K and in red, green, blue, amber • IP20 Rated
Rectangular in shape. Matt glass. Available in three housing Colours.
• CREE-Chip • 2-6 Watt ±10% • 180-540 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K, 6000 K and in red, green, blue, amber • IP20 Rated
LED * The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/
Square in shape. Matt glass. Available in three housing Colours.
• CREE-Chip • 2-6 Watt ±10% • 180-540 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K, 6000 K and in red, green, blue, amber • IP20 Rated
Horizontally rotates by 350 ° and tilts vertically to 350 °. With clear or matt glass.
Wall Lamp Sizilia
Ceiling / floor spotlight of an exclusive kind. Two centrally located glass lenses, under each one LED chip radiates upward and downward. Lamp housing rotates.
LED Driver: external.
Perfect as a reading lamp next to the bed or in corridors or lobbies.
Product Details*
LED Driver: external.
• Epistar-Chip • 15 Watt ±10% • 1215 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4200 K, 6400 K • Beam angle: 125º • Dimmable
Product Details*
• Citizen-Chip • 2 x 5 Watt ±10% • 2 x 410 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K
LED 15
Table & Reading Lamps Table Lamp Garda Housing made of black plastic, horizontally rotates by 270 °. Switchable brightness in three light colours in two stages. Double jointed arm and foot in satin Diecast aluminium.
Product Details* • 6 / 9 /12 Watt ±10% • 660 Lumen • Colour Rendering Index: RA>70 • Light Colour/s: 4100 K / 6400 K, switchable • Beam angle: 160º
Reading Lamp TL 8
“Table lamps are unbeatable in their individual application Reading lamps for clear light and tireless reading.“
... more Table & Reading Lamps
Table Lamp Lago
Housing, double jointed arm and foot in satin Diecast aluminium. Lamp housing 180 ° horizontally rotatable. External Driver included.
Product Details*
• 9 Watt ±10% • 400 Lumen • Colour Rendering Index: RA>70 • Light Colour/s: 4000 K • Beam angle: 160º
16
Table Lamp Roma
Reading Lamp TL 3
External Driver included.
Perfect as a reading lamp next to the bed or indoors.
Lamp made of satin diecast aluminium. Luminary housing with matt glass.
Product Details*
• 5,4 Watt ±10% • 300 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 4000 K • Beam angle: 160º
Timelessly elegant. Flexible lamp arm. On and off switch.
Integrated LED Driver (not dimmable).
Product Details*
• Cree-Chip • 1 Watt ±10% • 70 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K, 6000 K • Beam angle: 25º, 45º • Optional dimmable
Reading Lamp TL 4
Reading Lamp TL 5
Perfect as a reading lamp next to the bed or indoors.
Perfect as a reading lamp next to the bed or indoors.
Integrated LED Driver (not dimmable).
Integrated LED Driver (not dimmable).
Fine and elegant. Flexible luminary arm.
Product Details*
• Cree-Chip • 1 Watt ±10% • 70 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K, 6000 K • Beam angle: 25º, 45º • Optional dimmable
LED * The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/
Space saving. Adjustable, directional head.
Product Details*
• Cree-Chip • 1 Watt ±10% • 70 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K, 6000 K • Beam angle: 25º, 45º • Optional dimmable • Remote-Control
Reading Lamp TL 6
Reading Lamp TL 7
Reading Lamp TL 8
Perfect as a reading lamp next to the bed or indoors.
Perfect as a reading lamp next to the bed or indoors.
Perfect as a reading lamp next to the bed or indoors.
Integrated LED Driver (not dimmable).
Integrated LED Driver (not dimmable).
Integrated LED Driver (not dimmable).
Fine and elegant. Flexible lamp arm. On and off switch.
Product Details*
• Cree-Chip • 1 Watt ±10% • 70 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K, 6000 K • Beam angle: 25º, 45º • Optional dimmable
Fine and elegant. Flexible lamp arm. On and off switch.
Product Details*
• Cree-Chip • 1 Watt ±10% • 70 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K, 6000 K • Beam angle: 25º, 45º • Optional dimmable
Space saving. Adjustable, directional head. On and off switch.
Product Details*
• Cree-Chip • 1 Watt ±10% • 70 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K, 6000 K • Beam angle: 22º, 38º, 60º • Optional dimmable
LED 17
Ceiling Lamps Ceiling Panel DKL 7 Recessed or surface mounted. Six different sizes available. Optional recessed model available. Excellent uniform light. Also available as standard model for recessed mounting.
Product Details* • SMD-Chip • 32-45 Watt ±10% • 5000-6920 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 2700 K, 4250 K, 6500 K • Beam angle: 120º • Optional dimmable
Perfect as workplace illumination in offices, retail and production applications. LED Driver: internal and external.
Automobile Wichert – Bornkampsweg, Hamburg, Germany
DKL 7 Slim line
Thickness 11 mm only.
... more Ceiling Lamps
Pendant Lamp DKL 5
Slender round shape. Suitable for office, retail applications and services. LED Driver: internal.
Product Details*
• Cree-Chip • 3x 1 / 3x 3 Watt ±10% • 270 / 810 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K, 6000 K • Beam angle: 15º, 30º
18
Ceiling Lamp DKL 6 Dome
Universal lighting, round in shape. Perfect for hallways, stairwells and general applications.
Ceiling Panel
DKL 7 Slim line
Recessed or surface mounted. Six different sizes available. Optional recessed model available. Excellent uniform light.
Ceiling Lamp DKL 12
Ceiling Panel DKL 50 Standard
Perfect for hallways, stairwells, and general indoor applications.
Perfect for general lighting applications.
Surface mounted luminary in round or square shape.
Three or four rows of modules (3 or 4 light sources).
LED Driver: external.
Perfect for office, retail applications and production.
LED Driver: external.
LED Driver: external.
Product Details*
LED Driver: external.
Product Details*
Product Details*
• SMD-Chip • 11-21 Watt ±10% • 720-1680 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K • Beam angle: 120º • Optional dimmable
Product Details*
• 10-58 Watt ±10% • 900-5100 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 2700 K, 4250 K, 6500 K • Beam angle: 120º • Optional dimmable
• Epistar-Chip • 8-30 Watt ±10% • 640-2430 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4200 K, 6000 K • Beam angle: 120º
• OSRAM Prevaled Linear-Chip • 30-44 Watt ±10% • 3900-5200 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K • Optional dimmable: 1-10V, Dali
LED * The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/
“Ceiling lights – harmonic illuminated lamps – in an elegant and timeless design.“
Ceiling Panel DKL 51 Standard
Ceiling Panel DKL 52 Standard
Perfect for general lighting applications.
Perfect for general lighting applications.
LED Driver: external.
LED Driver: external.
Modern and stylish design. 80% of the light rays downward and 20% upward. Perfect as a desk lamp or above the reception desk.
Product Details*
Product Details*
LED Driver: external.
With 2 Modules (2 light sources).
• OSRAM Prevaled Linear-Chip • 43 Watt ±10% • 5200 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K • Optional dimmable: 1-10V, Dali
With 2 Modules (2 light sources).
• OSRAM Prevaled Linear-Chip • 40 Watt ±10% • 5000 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K • Optional dimmable: 1-10V, Dali
Pendant Lamp DKL 18
Product Details*
• 55 Watt ±10% • 5880 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K • Beam angle: 120º
DKL 18
LED 19
Floor Lamps
Pin-Base Lamps Floor Lamp ST 1 Stylish LED floor lamp with top and bottom lighting unit and 2-channel driver. Radiation 70% upwards (channel 1) and 30% downwards (channel 2). Each channel is switched separately. Thus, the light can be switched in two stages: 50% and 100%. Adjustable footplate. Optional presence detector and lighting circuit.
Product Details* • OSRAM-Chip • 106 Watt ±10% • 11.000 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K • Beam angle: 2x 135º (Up- and Downwards) • Optional dimmable
Pin-Base STL 5 Four different lengths making this a very versatile lamps. Perfect for corridors, stairwells and general applications. LED Driver: internal or external.
Product Details* • 9-22 Watt ±10% • 540-1320 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K, 6000 K • Beam angle: 140º • Base: 2G11
Base: Steel. Shaft and head: aluminium. Lamp cover: macrolon glass. Perfect for the modern office or living area. LED Driver: Min. 60.000h, ENEC-Certificate, 2-Channel.
“Floor lamps – glare-free light for the office and at home.“
“Pin-Base Lamps - convenient lighting for multiple applications.“
... more Pin-Base Lamps
Pin-Base Lamps STL 1
Lamp with optimal heat dissipation. Multi-socket for all G24d- and G24 q-versions (1, 2 and 3). Lamp socket rotates. Perfect for hallways, stairwells and general applications. LED Driver: internal or external.
Product Details*
• 5-13 Watt ±10% • 420-1200 Lumen • Colour Rendering Index: RA>78 • Light Colour/s: 3000 K, 4250 K, 5750 K • Beam angle: 120º • Base: Multisocket
20
LED * The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/
Pin-Base Lamps STL 2
Pin-Base Lamps STL 3
Perfect for hallways, stairwells and general applications.
Perfect for hallways, stairwells and general applications.
LED Driver: external.
LED Driver: external.
Product Details*
Product Details*
Lamp with optimal heat dissipation.
• Itswell-Chip • 6-8 Watt ±10% • 430-620 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3250 K, 4250 K, 5750 K • Beam angle: 140º • Base: G23
Lamp with optimal heat dissipation.
• Itswell-Chip • 6-8 Watt ±10% • 430-620 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3250 K, 4250 K • Beam angle: 140º • Base: 2G7
LED 21
Micro-Modules
Modules Illuminated Ceilings Four different module sizes and is cuttable.
KL 1 Product Details* Ceramic housing and copper heat • Cree-Chip sink. • 1,5 Watt ±10% • ca. 90 Lumen Perfect for “starry sky“ and • Colour Rendering Index: RA>80 fine lighting effects. • Light Colour/s: 3250 K, 6500 K • Beam angle: 360º LED Driver: external. • Base: G4
“Micro-Modules – massive light when space is limited.“
Perfect for ceiling lighting, light boxes and neon signs. LED Driver: external.
“Modules provide large, but uniform illumination.“
Product Details* • 17-30 Watt ±10% (depending on module size) • 1296-2304 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K, 6000 K • Beam angle: 120º • Dimmable with selected driver
Billboards UCI – Bochum, Germany (Cinema)
... more Modules LED modules produce uniformly bright and streakfree lighting. The light image is completely quiet - no flagging and fibrillation. Equip light frames with ARTEKO® LED modules in standardized formats.
Billboards
Five different module sizes, which makes each billboards size possible. Suitable for billboards, light boxes or illuminating ceilings.
LED * The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/
Single or double sided illuminated displays for indoor lighting. Modules in three lengths available.
LME-Module
Innovative Modules for individual lighting design. Perfect for office and shop.
Perfect for billboards.
LED Driver: external.
LED Driver: external.
LED Driver: external.
Product Details*
Product Details*
Product Details*
• 0,6-8,6 Watt ±10% (depending on Module size) • 30-480 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 4000 K • Beam angle: 120º • dimmable with selected Driver
22
Frame Module
• 7,5-37,5 Watt ±10% • 300-1500 Lumen • Colour Rendering Index: RA>75 • Light Colour/s: 4000 K • Beam angle: 16º • dimmable with selected Driver
Round, rectangular or irregularly shaped design without limit, as the modules are cuttable.
• 4,5-10 Watt ±10% • 540-1050 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 2700 K, 3500 K, 4500 K • Beam angle: 160º Billboards Smiley’s – Hamburg, Germany
LED 23
Striplights
In Line Lamps SRP 1 RGB RGB Strip Light for accessories: Amplifier AMP 1 and Controller CTR 1.
Product Details* • 7,2-14,4 Watt ±10% (each Metre) • 12 Volt DC • 30 or 60 LED each Metre • Colour Rendering Index: RGB Suitable for indoor light arrange- • Dimmable with Controller ments.
In Line Lamp LL 5 Can be used singly or in a row light band. Available in three different lengths.
LED Driver: external.
Perfect for shop, warehouse and general applications.
Fast assembly without to open the lamp!
Product Details* • 25-49 Watt ±10% (depending on Size) • 2400-5600 Lumen • Colour Rendering Index: RA>70, RA>80 • Light Colour/s: 3250 K, 4750 K, 6250 K • Beam angle: 120º • Dimmable with selected dimmer
LED Driver: external. 1500
ARTEKO ® LED strip lights are something very extraordinary. LED Chips, embedded in a narrow slim silicone tubing for laying over long distances. 1200
Combination of different sizes with each other. Controlling of the RGB model via an amplifier and control module with preset sequential programs such as the impressions of a colourful waterfall or blinking motion illusions. If you prefer a more discreet and quiet scenario, choose the soft light transitions with many beautiful colours.
“Striplights – for versatile applications.“
... more Striplights
SRP 3
Flexible Strip Light, cuttable every 3 LEDs. Normal lighting. Perfect for shelf or cove lighting. LED Driver: external.
Product Details*
• 14,4 Watt ±10% each Metre • 12 Volt DC • 60 LED / Metre • Light Colour/s: 2700 K, 3000 K, 4000 K • Beam angle: 120º
24
600
“In Line Lamps – practical and flexible to illuminate long distances. Plug-n-go!“
... more In Line Lamps
SRP 10
SRP 12
Aluminium Profile
LED Driver: external.
Perfect for accompaniment lighting, corridors, stairwells.
Plastic cover, round or flat, in clear, frosted or milky available.
Product Details*
LED Driver: external.
End caps.
Flexible Strip Light, cuttable every 3 LEDs Normal light and monochromatic Colours. Perfect for shelf or cove lighting.
• 4,8-9,6 Watt ±10% each Metre • 12 Volt DC • 60 or 120 LED / Metre • Light Colour/s: 3000 K, 5000 K, 8000 K and red, green, blue, amber, yellow • Beam angle: 120º
230 Volt (High-Volt), can also be used for outdoor applications up to 150 metres in length with one Driver.
Mount strip lights secure. Material anodized Aluminium. For surface, ceiling, or corner mounting.
Product Details*
• 3,5-7 Watt ±10% • 230 Volt AC • Light Colour/s: 3000 K, 6500 K and red, green, blue, amber • Beam angle: 120º • Dimmable with Leading-Edge dimmer
LED * The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/
Light Band
Fast assembly without opening the lamp to open! In four base sizes. Additional Features: Blind lighting bands in three lengths and a Track Light Rail for integration of Track Lights in the light band. Perfect for shop, warehouse and general applications. LED Driver: external.
Product Details*
• 11,5-57,6 Watt ±10% • 1220-6220 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3250 K, 4750 K, 6250 K • Beam angle: 120º
LED 25
Tubes Tube Fixture Standard
60-150 cm
Series 7 Due to it‘s external Driver up to 100.000h lifespan. Adjustable Base. Perfect for Industry, Warehouse, Workshop, Production and general lighting.
Tube Fixture ETR
LED Driver: external.
Edelstahl 60-150 cm for 1 and 2 tubes
Product Details* • Epistar-Chip • 8-33 Watt ±10% • 900-3750 Lumen • Colour Rendering Index: RA>70 • Light Colour/s: 2600 K, 3150 K, 4150 K, 4750 K, 6250 K • Base: G13
Tube Fixture IP65
60-150 cm for 1 and 2 tubes
The proportion of artificial light from fluorescent tubes in factories, parking garages and many households is around 75%. Because they are extremely well suited for applications that require a long and uniform illumination. However, they have many disadvantages. Conventional fluorescent lamps contain environmentally harmful substances such as mercury and different noble gases. Through these harmful content, the fluorescent tubes have to be disposed of as hazardous waste. In addition, fluorescent light require a certain amount of time until it devel-
ops its full brightness and quickly turn hot. Other weaknesses are buzzing, fatigue and flickering. ARTEKO® LED tubes do not contain any toxic materials and require no ballast. They have a standard G13 socket. The life-span of our LED tubes is significantly longer, were they reach at least 50,000h.
Retrofit. Adjustable base. Also suitable for emergency power systems. Also available with 80º beam angle. Perfect for industrial, warehouse, workshop, manufacturing and general applications. LED Driver: retrofit. (Magnetic/ Electronic Ballast only)
Product Details*
• Epistar-Chip • 8-22 Watt ±10% • 720-2100 Lumen • Colour Rendering Index: RA>70 • Light Colour/s: 2600 K, 3150 K, 4150 K, 4750 K, 6250 K • Base: G13
26
Some of our LED tube models, are of a “retro-fit“ design, this means fluorescent tubes can be simply replaced as a LED starter is included. But always consider the type of the existing ballast.
Warehouse „A.W. Niemeyer“ – Hamburg, Germany
“LED Tubes – perfect for any industrial and logistic applications.“
... more Tubes
Series 2
Retrofit – Safety is our top priority. The replacement of light bulbs is usually not a problem. For fluorescent lamps that is not always that easy and should be performed by a specialist/electrician.
Series 3
Series 5 – T5
Series 6
Perfect for industrial, warehouse, workshop, manufacturing and general applications.
Perfect for general applications.
Perfect for industrial, warehouse, workshop, manufacturing and general applications.
LED Driver: external.
Product Details*
With external drivers up to 100,000 hours of life-span. Adjustable base.
Product Details*
• Epistar-Chip • 8-28 Watt ±10% • 900-3180 Lumen • Colour Rendering Index: RA>70 • Light Colour/s: 2600 K, 3150 K, 4150 K, 4750 K, 6250 K • Base: G13
• T 5 Tubes with clear or frosted Cover • Round design
LED Driver: external. • SMD 2835 Chip • 10-30 Watt ±10% • 950-2950 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 4150 K, 6250 K • Base: G5
Retrofit. Adjustable base.
LED Driver: retrofit. (Magnetic/ Electronic Ballast only)
Product Details*
• Epistar-Chip • 8-30 Watt ±10% • 900-3180 Lumen • Colour Rendering Index: RA>70 • Light Colour/s: 2600 K, 3150 K, 4150 K, 4750 K, 6250 K • Base: G13 Model Series 6 Sensor: with motion and energy saving mode: after 60 seconds of no motion detection, tubes turn down to a power of 15% only.
Series 6 sensor
With motion and energy saving mode: after 60 seconds of no motion detection, tubes turn down to a power of 15% only. Adjustable base. Perfect for industrial, warehouse, workshop, manufacturing and general applications. LED Driver: retrofit. (Magnetic/ Electronic Ballast only)
Product Details*
• Epistar-Chip • 8-25 Watt ±10% • 720-2200 Lumen • Colour Rendering Index: RA>70 • Light Colour/s: 2600 K, 3150 K, 4150 K, 4750 K, 6250 K • Base: G13
LED * The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/
Series 8
Series 9
Series 10
Perfect for industrial, warehouse, workshop, manufacturing and general applications.
Perfect for industrial, warehouse, workshop, manufacturing and general applications.
LED Driver: internal.
“Ball resistant grid“ for T8 LED tubes. Grid reinforced with steel wires and secured with screws, to prevent falling out.
Product Details*
For 2 or 3 tubes.
LED Driver: retrofit. (Magnetic/ Electronic Ballast only)
LED Driver: external.
Product Details*
• Epistar-Chip • 9,5-28 Watt ±10% • 950-2950 Lumen • Colour Rendering Index: RA>80, RA>90 • Light Colour/s: 2600 K, 3150 K, 4150 K • Base: G13
Oval design. Retrofit. Adjustable base.
• Epistar-Chip • 10-30 Watt ±10% • 1000-3100 Lumen • Colour Rendering Index: RA>80, RA>90 • Light Colour/s: 2600 K, 3150 K, 4150 K, 6250 K • Base: G13
Oval design. External Driver. Adjustable base.
Product Details*
LED-Tubes with S14s- or S14d-base.
• SMD-Chip. • 6 Watt ±10% • 380 Lumen • Colour Rendering Index: RA>70 • Light Colour/s: 2700 K, 4500 K • Beam angle: 140º • Base: S14s or S14d
Tube Fixture Sport
• Base: G13 • for tube lenght of 1500 mm
Light Band System
Fast-assembly lighting system for 1 or 2 tubes. Accessories: • Suspension • Rail 5-pin/7-pin • Rail connector • Reflectors • Grid • Cover • Fluorescent tube support • Fluorescent tube fixture IP65 • Stainless Steel tube fixture
LED 27
Outdoor Lamps Outdoor Lamp Kiel With an extremely high-power LED chip. Available in three Colours. Suitable for parks, natural areas open to the public and general walkways.
Product Details* • 33 Watt ±10% • 3000 Lumen • Colour Rendering Index: RA>70 • Light Colour/s: 3000 K, 5350 K • Beam angle: 160º
LED Driver: external.
“Outdoor lighting – architecture accentuate with lighting.“ ... more Outdoor Lamps
Recessed Lamp Hof
With extremely powerful high power LED chip and a very corrosion resistant, round or square, stainless steel ring. Perfect for corniche, promenades, gardens and outdoor objects. LED Driver: internal.
Product Details*
• 3-10 Watt ±10% • 290-990 Lumen • Colour Rendering Index: RA>60 / RA>70 • Light Colour/s: 3000 K, 6500 K
28
Recessed Minispot
High quality 304 stainless steel housing. IP65 rated. Perfect for stairwells, elevators and decorative accent lighting. LED Driver: external.
Product Details*
• OSRAM OSLON-Chip • 3 Watt ±10% • 260 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 4100 K • Beam angle (Lense): 30º, 45º, 60º, 90º • Beam angle with vandal-safe security Glass: 120º
Walkway Lamp Amrum and Foehr
Beautiful and slim design. For 230 volt power connection with E27 Base. Perfect for corniche, promenades, gardens and outdoor objects.
Billboards Floodlight
For an excellent and uniform illumination of large billboards or billboards. The 75 watt version replaces conventional 450 watt halogen spotlights. For billboards up to 6 meters in height. Perfect for posters, shop signs, facades and billboards.
Wall washer Matrix Flood RGB
For impressive facade lighting. RGB with digital control by standard DMX 512 protocol. IP67 rated. Perfect for buildings, objects, and all applications with Colour-shaping effect.
LED Driver: internal.
LED Driver: Further Accessories for full function required.
Product Details*
Product Details*
• Cree-XP-E-Chip • 50-80 Watt ±10% • 4500-7500 Lumen • Colour Rendering Index: RA>75 • Light Colour/s: 3250 K, 4750 K, 6250 K
• 108 Watt ±10% • Light Colour/s: RGB • Beam angle: 15º, 25º, 30º, 45º, 60º
LED * The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/
Wall washer PAR RGB
For impressive facade lighting. RGB with digital control by standard DMX 512 protocol. Lamp: IP68 rated. Controller: IP65 rated. Perfect for buildings, objects, and all applications with Colour shaping effect. LED Driver: Further Accessories for full function required.
Product Details*
• 40-78 Watt ±10% • Light Colour/s: RGB • Beam angle: 15º, 25º, 30º, 45º, 60º
Wall washer Spot RGB
For impressive facade lighting. RGB with digital control by standard DMX 512 protocol. IP66 rated. Perfect for buildings, objects, and all applications with Colour shaping effect. LED Driver: Further Accessories for full function required.
Product Details*
• 9 Watt ±10% • Light Colour/s: RGB • Beam angle: 15º, 25º, 30º, 45º, 60º
Wall washer
Spike solo
Perfect for buildings, objects, and all applications with Colour shaping effect.
Perfect for corniche, promenades, gardens and outdoor objects.
For impressive facade lighting. RGB with digital control by standard DMX 512 protocol. IP65 rated. Also available in monochromatic lighting Colours.
E27 socket and rubber gasket for moisture protection. Vertical adjustable housing. As LED outdoor lamp particularly suitable for IP65 rated PAR 30 and PAR 38 bulbs.
Accessories
• C ontroller CTR 2 for RGB Outdoor Lamps • A mplifier AMP 2 for RGB Outdoor Lamps
LED Driver: Further Accessories for full function required.
Product Details*
• 36-108 Watt ±10% • Light Colour/s: RGB, red, green, blue, white, amber • Beam angle: 15º, 25º, 30º, 45º, 60º
LED 29
Floodlights Floodlight FL 11 The FL 11 can be adjusted to requirements from 24 to 70 watts. The elegant design, allows the use even in exposed position/location. LED Driver: internal.
Product Details* • Bridgelux VERO29-Chip • 27-76,8 Watt ±10% • 3800-9450 Lumen • Colour Rendering Index: RA>70, RA>80, RA>90 • Light Colour/s: 2700 K, 3000 K, 4000 K, 5000 K • Beam angle: 100º • Optional dimmable
“Floodlights – increase security with LED Lighting.“ ... more Floodlights
Floodlight FL 1
For Indoor and Outdoor applications. Diecast aluminium housing, reflector made of high purity aluminium, safety glass, durable ballast, LED high-power chip. Also available in monochromatic lighting Colours and as RGB floodlight. Perfect to illuminate smaller sized areas. LED Driver: internal.
Product Details*
• 11-21 Watt ±10% • 1200-2400 Lumen • Colour Rendering Index: RA>75, RA>80 • Light Colour/s: 3250 K, 4750 K, 6500 K, red, green, yellow, blue • Beam angle: 110º • optional dimmable
30
Floodlight FL 2 / FS 2
Available as Flood or Spotlight for Indoor and Outdoor applications. Diecast aluminium housing, reflector made of high purity aluminium, safety glass, durable ballast, LED high-power chip. Also available in monochromatic lighting Colours and for 230 Volt AC, 12 Volt DC or 24 Volt DC.
Floodlight FL 3 / FS 3
Available as Flood or Spotlight for Indoor and Outdoor applications. Diecast aluminium housing, reflector made of high purity aluminium, safety glass, durable ballast, LED high-power chip. Also available in monochromatic lighting Colours and for 230 Volt AC, 12 Volt DC or 24 Volt DC.
Floodlight FL 4
Floodlight for Indoor and Outdoor applications. Asymmetric Reflector. Diecast aluminium housing, reflector made of high purity aluminium, safety glass, durable ballast, LED high-power chip. Also available in monochromatic lighting Colours and for 230 Volt AC, 12 Volt DC or 24 Volt DC.
Perfect to illuminate smaller sized areas.
Perfect to illuminate medium sized areas.
LED Driver: internal. Also available with rechargeable battery.
LED Driver: internal.
Perfect to illuminate medium sized areas.
Product Details*
LED Driver: internal.
Product Details*
• 23-35 Watt ±10% • 2200-3300 Lumen • Colour Rendering Index: RA>70 • Light Colour/s: 2700 K, 3000 K, 4000 K, 5000 K, 6500 K, red, green, yellow, blue • Beam angle: 50º, 100º
• 46-57 Watt ±10% • 4400-5500 Lumen • Colour Rendering Index: RA>70 • Light Colour/s: 2700 K, 3000 K, 4000 K, 5000 K, 6500 K, red, green, yellow, blue • Beam angle: 50º, 100º
Product Details*
• 56-92 Watt ±10% • 4300-7200 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3250 K, 4750 K, 6500 K, red, green, yellow, blue • Beam angle: 75º
Floodlight FS 5
Available as Spotlight for Indoor and Outdoor applications. Diecast aluminium housing, reflector made of high purity aluminium, safety glass, durable ballast, LED high-power chip. Also available in monochromatic lighting Colours and for 230 Volt AC, 12 Volt DC or 24 Volt DC.
Floodlight FL 6 / FS 6
Available as Flood or Spotlight for Indoor and Outdoor applications. Diecast aluminium housing, reflector made of high purity aluminium, safety glass, durable ballast, LED high-power chip. Also available in monochromatic lighting Colours and for 230 Volt AC, 12 Volt DC or 24 Volt DC.
Floodlight FL 7 / FS 7 Genius FL 8 / FS 8 Genius Compact
Available as Floodlight for Indoor and Outdoor applications. Diecast aluminium housing, reflector made of high purity aluminium, safety glass, durable ballast, LED high-power chip.
Perfect to illuminate larger sized areas.
Perfect to illuminate larger sized areas.
Perfect to illuminate larger sized areas, Industrial applications, Street lighting and many more.
LED Driver: internal.
LED Driver: internal.
LED Driver: internal.
Product Details*
Product Details*
Product Details*
• 45-81 Watt ±10% • 4400-7700 Lumen • Colour Rendering Index: RA>70 • Light Colour/s: 2700 K, 3000 K, 4000 K, 5000 K, 6500 K, red, green, yellow, blue • Beam angle: 22º
LED * The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/
• 91-151 Watt ±10% • 8800-15400 Lumen • Colour Rendering Index: RA>70 • Light Colour/s: 2700 K, 3000 K, 4000 K, 5000 K, 6500 K, red, green, yellow, blue • Beam angle: 22º, 75º
• OSRAM OSLON Square-Chip • 30-400 Watt ±10% • 3600-48000 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3250 K, 6500 K • Beam angle: 20º, 60º, 120º
Projection light FP 7 Genius Projection FP 8 Genius Compact
Available as Spotlight for Indoor and Outdoor applications. Diecast aluminium housing, reflector made of high purity aluminium, safety glass, durable ballast, LED high-power chip. Perfect to illuminate larger sized areas, Industrial applications, Street lighting and many more. LED Driver: internal.
Product Details*
• OSRAM OSLON Square-Chip • 30-400 Watt ±10% • 3600-48000 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3250 K, 6500 K • Beam angle: 60º, 120º
Floodlight FL 9 PIR
Floodlight for outdoor applications with PIR motion detector. Diecast aluminium housing, reflector made of high purity aluminium, safety glass, durable ballast, LED high-power chip. Perfect to illuminate smaller sized areas. LED Driver: internal.
Product Details*
• 27-58 Watt ±10% • 2200-5500 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 4750 K • Beam angle: 75º
Floodlight FL 12 Mega
Replaces conventional 2000 watt metal halide lamps. Waterproof with a low condensate tendency. With OSRAM OSLON Square chip. Perfect for factories, shipyards, outdoors, industrial and harbours, sports courts. LED Driver: internal.
Product Details*
• 500-1000 Watt ±10% • 77500-155000 Lumen • C olour Rendering Index: RA>70 • L ight Colour/s: 4000 K, 5700 K • B eam angle: 87º/21º
LED 31
Special Lamps FLexP 1 Safety floodlight for use in potentially dangerous environments. With antistatic, anticorrosive paint type WF2. Diecast aluminium housing. Hardened glass lens. Rated: Ex d IIB T6 (Explosion protection). ATEX certified
High-Bay Lamps Product Details* • Bridgelux-Chip • 20-50 Watt ±10% • 1800-4600 Lumen • Colour Rendering Index: RA>70 • Light Colour/s: 5000-6500 K • Beam angle: 60º, 120º and 140º horizontal / 70º vertical
Perfect for heavy industry, shipyards, offshore installations, tunnels and more. LED Driver: internal.
“Special light – for special applications.“
... more Special Lamps
High-Bay HL 1 High-Efficient LED chip. The cabinet surface is sealed with silicone and therefore very resistant to environmental influences. Diecast aluminium housing with glass cover. Different Reflectors made of high purity aluminium or poly carbonate.
Product Details* • 66-109 Watt ±10% • 7200-12000 Lumen • Colour Rendering Index: RA>70 • L ight Colour/s: 3000 K, 6500 K • B eam angle: 30º, 60º
Perfect for factories, warehouses, schools, gymnasiums, yards and outdoor areas. LED Driver: internal.
“High-Bay Lamps – light for spacious illumination.“
... more High-Bay Lamps
Aluminium Reflector 30º
FLexP 2
Grow Lamp
High-Bay HL 2
Perfect for greenhouses, plant breeding and flowers.
High-Efficient OSRAM OSLON Square-chip. The cabinet surface is sealed with silicone and therefore very resistant to environmental influences.
Rated: Ex d IIB T6 (Explosion protection). ATEX certified
LED Driver: internal.
Diecast aluminium housing.
Perfect for heavy industry, shipyards, offshore installations, tunnels and more.
Product Details*
• 100-500 Watt ±10%
Perfect for factories, warehouses, schools, gymnasiums, yards and outdoor areas.
Safety floodlight for use in potentially dangerous environments. With antistatic, anticorrosive paint type WF2. Diecast aluminium housing. Hardened glass lens.
Grow Lamp for efficient plant growth. With OSRAM Chip.
LED Driver: internal.
Product Details*
• 60-120 Watt ±10% • 5700-11500 Lumen • Colour Rendering Index: RA>70 • Light Colour/s: 5000-6500 K, • Beam angle: 60º, 120º and 140º horizontal / 70º vertical
32
LED * The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/
High-Bay HL 3
High performance OSRAM OSLON Square-chip. For high ambient temperatures up to + 90 ° C. Housing waterproof and with a low condensate tendency. 13 different position settings, due to flexible headband.
High-Bay HL 4
Housing white powder coated. Reflector mounted separately. Diecast aluminium housing. Perfect for factories, warehouses, exhibition.
Diecast aluminium housing.
LED Driver: internal.
Product Details*
LED Driver: internal.
Perfect for factories, warehouses, schools, gymnasiums, yards and outdoor areas.
Product Details*
LED Driver: internal.
• 60-180 Watt ±10% • 6750-21870 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3500 K, 6000 K • Beam angle: 30º, 60º
Product Details*
• 90-500 Watt ±10% • 10200-52000 Lumen • Colour Rendering Index: RA>70 • Light Colour/s: 4000 K,5700 K • Beam angle: 25º, 45º, 60º, 90º
• 60-120 Watt ±10% • 5700-11400 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 4000 K, 5700 K • Beam angle: 90º
Prismatic Reflector
Aluminium Reflector 60º
LED 33
Street Lamps Street Lamp Cologne Extremely powerful high-power LED chip. High brightness and clear Colours. Diecast aluminium housing with high intensity, safety glass cover, reflector made of high purity aluminium.
Product Details* • 22-44 Watt ±10% • 2500-5000 Lumen • Colour Rendering Index: RA>70 • Light Colour/s: 3000 K, 5000 K, 6500 K • Beam angle: 120º x 80º
AC 230 V AC, 12V DC or 24V DC. For posts: 3-7 metres. LED Driver: internal.
Sewage Plant in Geesthacht, Germany
Terminal „H.&J. Brüggen“ in Lübeck, Germany
“LED Street Lamps – increased safety in public areas.“
... more Street Lamps
Street Lamp Cologne II
Street Lamp Airport
Extremely powerful high-power LED chip. High brightness and clear Colours. Perfect heat dissipation. Diecast aluminium housing with high intensity, safety glass cover, reflector made of high purity aluminium.
Extremely powerful high-power LED chip. High brightness and clear Colours. Diecast aluminium housing with high intensity, safety glass cover, reflector made of high purity aluminium.
AC 230 V AC, 12 volts DC or 24 volts DC.
AC 230 V AC, 12 volts DC or 24 volts DC.
For posts: 7-20 Metre.
For posts: 12-30 Metre.
LED Driver: internal.
LED Driver: internal.
Product Details*
Product Details*
• 58-138 Watt ±10% • 5250-12600 Lumen • Colour Rendering Index: RA>70 • Light Colour/s: 3000 K, 4000 K, 5700 K • Beam angle: 148º
34
• 158-218 Watt ±10% • 17500-25000 Lumen • Colour Rendering Index: RA>70 • Light Colour/s: 3000 K, 4000 K, 6500 K • Beam angle: Single 140 W: 4 x 65º, Total 80º x 130º
Street Lamp Bonn
Can be mounted on top or side of post. Very lightweight model. Diecast aluminium housing with high intensity, safety glass cover, reflector made of high purity aluminium.
Street Lamp Bonn II
Can be mounted on top or side of post. Very lightweight model. Diecast aluminium housing with high intensity, safety glass cover, reflector made of high purity aluminium.
AC 230 V AC, 12 volts DC or 24 volts DC.
AC 230 V AC, 12 volts DC or 24 volts DC.
For posts: 3-7 Metre.
For posts: 7-15 Metre.
LED Driver: internal.
LED Driver: internal.
Product Details*
Product Details*
• 22-45 Watt ±10% • 2100-4200 Lumen • Colour Rendering Index: RA>70 • Light Colour/s: 3000 K, 4000 K, 6500 K • Beam angle: 120º
• 55-90 Watt ±10% • 5250-8400 Lumen • Colour Rendering Index: RA>70 • Light Colour/s: 3000 K, 4000 K, 6500 K • Beam angle: 120º
Street Lamp Genius
OSRAM OSLON Square-chip. The “All-in-one“ light. Can be used as street light, flood or spotlight. AC 230 V AC, 12 volts DC or 24 volts DC. Perfect for heavy industry and foundries. For posts: 12-50 Metre. LED Driver: internal.
Product Details*
• OSRAM OSLON Square-Chip • 400 Watt ±10% • 48000 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 6000 K • Beam angle: 140º x 60º
LED * The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/
Street Lamp Genius compact
OSRAM OSLON Square-chip. The “All-in-one“ light. Be used as street light, flood or spotlight.
Accessorie Spigot Fully galvanized iron.
Accessorie Reducing Pipe Fully galvanized iron.
Rain endcap included.
AC 230 V AC, 12 volts DC or 24 volts DC. Perfect for heavy industry and foundries. For posts: 12-35 Metre. LED Driver: internal.
Product Details*
• 30-270 Watt ±10% • 3600-32400 Lumen • Colour Rendering Index: RA>80 • Light Colour/s: 3000 K, 6000 K • Beam angle: 140º x 60º
LED 35
LED Benefits - Save up to 90 percent electricity
Good to know - Lumen vs. Watt
The “Efficiency Stars“ of bulbs
Energy Saving Bulbs (CFL) Efficient and versatile. Many different light colours and shapes available. Life-span depends on the quality and range between 6,000 and 10,000 hours. Attention: CFL contain hazardous substances such as Mercury.
Efficient Halogen Bulbs The efficient light bulb. Particularly warm light and good colour rendering. Life-span depends on the quality and range between 2,000 and 4,000 hours.
20%
Efficient bulbs consume much less electricity than conventional ones. With the right light, up to 90 percent of electricity and cost could be saved.
Watts are used to measure power consumption. Often individuals confuse a „wattage“ rating with a “lumen“ rating. Lumens describe the brightness of the lamp, wattage describes the power it takes (on your utility bill) to operate that lamp. In general, however, a higher wattage lamp will normally produce more light (more lumens) than a lower wattage lamp OF THE SAME TYPE.
Brightness in lumen (lm)
LED Bulbs (Light Emitting Diodes) Efficient, durable, sturdy. Suitable as a replacement for incandescent and any other lighting application. Life-span depends on quality and range between 15,000 and 100,000 hours.
Lumen is a unit of measure for light energy. In other words, the total light output from an electric source is expressed in lumens. The higher the Lumen rating, the brighter the light to the human eye.
Halogen
Energy Saver CFL
LED
Energy Efficiency Program of the EU up to 90%*
up to 80%*
up tp 60%
Energy Consumption in %
Incandescent Bulb
Light bulb packages will standardize with new labels which will make it much easier to buy the most efficient light bulb, regardless if LED, CFL, fluorescent or halogen. The main indicator on the light bulb package will be “Lumen” that will replace the current “Watts.” Lumen represents the amount of light emitted by a light source and is a more accurate measure of the brightness of a bulb. So no matter what kind of bulb, simply comparing lumens will enable you to compare the brightness level each bulb will deliver. After you determine the lumen level you prefer, you can then look to other indicators such as the energy efficiency, lifetime run cost, and dim-ability to select the ideal bulb for your application.
Incandescent Bulb
Halogen*
Fluorescent Tubes
Energy Saver CFL*
LED*
* Bulbs have the ability to create at least as much brightness compared to incandescent bulbs.
36
LED
LED 37
Lighting Terms made easy!
Lighting Terms made easy!
What is Candela, Lumen and Lux? ... a very simple explanation! Have you ever wondered what candelas, lumens and lux REALLY are? Well, you can research it. You can Google it. And read article after article, getting more and more confused in the process. The following explanation aims to summarise and simplify the magic of Lighting Terms for those light measuring tools.
One candela = the light intensity from a candle (more or less).
Warm-White
One lumen = the amount of light produced by a 1 candela source radiating out through 1 steradian (one steradian is about 1/12.57 of a sphere) - in this case 1 m² of this sphere.
One lux = the illumination produced when there is one lumen falling on one square metre.
Cool/Daylight-White
Light produced from LED lamps by a diode (Light Emitting Diode). Here we explain the main terms which are associated with LED lamps & lights: Did you know: The light intensity of the sun equals about 20,000,000,000,000,000,000,000 candelas!
Example: Let`s say a light source produces 100 lumens and illuminates the spot on the wall at 100 lux. If we narrow the beam so that the illuminated spot on the wall is reduced by 1/10, the number of lumens is still the same, 100 lumens, but now all these 100 lumens are ten times as “concentrated”, making the spot on the wall ten times brighter; 1000 lux.
100 lumens and wide beam -> 100 lux
Natural-White
100 lumens and narrow beam -> 1000 lux
Colour Temperature
Beam Angle
Kelvin, described as a temperature or K, expresses the overall colour of a light source itself. When you describe a light as being either ‚cool‘ or ‚warm‘ it‘s the colour temperature that you‘re discussing. Lamps range in colour from about 2100K to 10000K. Lower colour temperatures (ex 3000K) represent ‚warmer‘ light, higher (ex 4100K +) represent ‚cooler‘ light.
Ranging between 0 and 360 degrees, it is the direction light is emitted by a particu lar bulb. The common incandescent bulb has a beam angle close to 350 degrees because it sends light in all directions except where it plugs into the light socket.
Warm-white will be used for a cosy atmosphere in living rooms, natural-white and day-light where it comes to bright illumination and the best visibility of the illumnated area - for example in the workplace. Color temperature
Beam angle
LED´s, on the other hand, can be focused or dispersed. As the beam angle increases, the intensity of the light decreases because the light is dispersing over a wider range. On the other hand, as the beam angle decreases, the light becomes more focused, which results in a more tightly-focused, intense beam of light.
Another Example: =Let`s assume this light source illuminates a 1m² spot on the wall - 1 metre away - at 10 Lux.
1 m² 10 lux 1 Metre
Then we move the light source 1 Metre further away from the wall. Now the spot on the wall is four times as big (inverse-square-law), making it 4m². So instead of concentrating the lumens, as we did before, we are SPREADING THEM OUT, giving a lux value of 10/4 = 2.5 lux!
4 m² 2.5 lux
CRI or RA (Colour Rendering Ability) Colour rendering is the ability of a light source to produce COLOUR in objects. The colour rendering index is ranging between 0-100 and 100 is best in producing vibrant colour in objects. So in essence, light with a colour rendering ability of 80 will produce more vibrant colour in the same object than a light source with a colour rendering ability of 60, etc.
Note: LED bulbs have the property that the luminance (lumens) is depending on the colour-temperature (degrees Kelvin) of the generated light. Warm-white lights with the same power are a little less bright than the day-light version.
2 Metre 38
LED
LED 39
ARTEKO is a registered manufacturer in Europe under the “WEEE” legislation (Stiftung EAR) with the registration No. DE84915749. Jurisdiction and Performance Hamburg, Germany. We trade on the basis of our General Terms and Conditions only! Through constant product innovations, the specifications of the products are subject to change. For errors of any kind, we take no responsibility. Colour variations are due to printing.
Headquarter:
Branch Office Middle-East:
Sole Agent Southern Africa:
ARTEKO® LED Holstenkamp 40 22525 Hamburg Federal Republic of Germany
ARTEKO® Engineering Middle-East P.O. Box 21207 Manama Kingdom of Bahrain
German Techno Importers (Pty) Ltd. P.O. Box 66385 Broadway 2020 South Africa
T: +49 40 89909-150 F: +49 40 89909-199 E:
[email protected] W: www.arteko-led.com
T: +973 36 36 34 28 F: +49 40 89909-199 E:
[email protected] W: www.arteko-led.com
T: +27 10 237 0052 F: +27 86 503 0379 E:
[email protected] W: www.arteko-led.com
Please refer to our website for product and data-sheets at: www.arteko-led.com
© 2014 ARTEKO, Hamburg, Germany. All rights reserved.
