MULTI-INNO TECHNOLOGY CO., LTD. www.multi-inno.com
LCD MODULE SPECIFICATION Model : MI0350B2T-1
For Customer's Acceptance: Customer
Approved
Comment
Revision
1.0
Engineering Date Our Reference
2012-01-22
Ver 1.0
MODULE NO.: MI0350B2T-1
REVISION RECORD REV NO. 1.0
REV DATE 2012-01-22
MULTI-INNO TECHNOLOGY CO.,LTD.
CONTENTS First release
REMARKS /
P.2
MODULE NO.: MI0350B2T-1
Ver 1.0
CONTENTS GENERAL INFORMATION EXTERNAL DIMENSIONS ABSOLUTE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS BACKLIGHT CHARACTERISTICS ELECTRO-OPTICAL CHARACTERISTICS INTERFACE DESCRIPTION REFERENCE APPLICATION CIRCUIT RELIABILITY TEST CONDITIONS INSPECTION CRITERION PRECAUTIONS FOR USING LCD MODULES PACKING SPECIFICATION PRIOR CONSULT MATTER
MULTI-INNO TECHNOLOGY CO.,LTD.
P.3
Ver 1.0
MODULE NO.: MI0350B2T-1 GENERAL INFORMATION
Item of general information LCD Type
Contents TFT/TRANSMISSIVE
Unit /
Recommended Viewing Direction Full viewing angle Module area (W × H×T) 51.06×86.95×2.60
O’ Clock
Viewing area (W×H)
47.56×77.80
mm2
Active area (W×H)
45.36×75.60
mm2
Number of Dots
480RGB×800
/
Pixel pitch (W × H) Driver IC
0.0945×0.0945 HX8369-A
mm2 /
Interface Type
MPU/MIPI interface
/
Input voltage Module Power consumption
3.3 387
V mw
Colors Backlight Type Weight With/Without TSP
16.7M 6 LEDs TBD Without TP
/ / g /
MULTI-INNO TECHNOLOGY CO.,LTD.
mm3
P.4
3.47" TFT 16.7M COLOR 480XRGBX800 DOTS VIEWING DIRECTION : ALL
: 1.LCD HFFS Transmissive,Normal Black 2.LCD IC HX8369-A 3. : -20C TO 70C 4.: -30C TO 80C 5.LED: 6 6.MDS VA#,!"#$%&' MDS VA()60.3mm,*+' LCD AA()/0.4mm;
LEDA
FR4
LEDK1 LEDK2 LEDK3 LEDK4 LEDK5 LEDK6
A K1 K2 K3 K4K5K6
XL YD XR YU
T=0.2MM)
0.3(MAX)
FR4(T=0.2MM)
LED CIRCUIT DIAGRAM: If=90 mA Vf=3.0~3.4V
FH26-61S-0.3SHW(HIROSE)
+?@
ROHS?@ G____JKMPQ?@U
P.5
MULTI-INNO TECHNOLOGY CO.,LTD.
Ver 1.0 MODULE NO.: MI0350B2T-1 EXTERNAL DIMENSIONS
Ver 1.0
MODULE NO.: MI0350B2T-1 ABSOLUTE MAXIMUM RATINGS Parameter of absolute maximum ratings
Symbol
Min
Max
Unit
Supply voltage for logic
VCC
-0.3
5.5
V
Operating temperature
Top
-20
70
°C
Storage temperature
TST
-30
80
°C
Humidity
RH
-
90%(Max60 °C)
RH
Supply voltage for I/O interfa
IOVCC
-0.3
3.6
V
ELECTRICAL CHARACTERISTICS DC CHARACTERISTICS Parameter of DC characteristics
Symbol
Min
Typ
Max
Unit
Supply voltage for logic
VCC
2.3
2.8/3.3
4.8
V
I/O power supply
IOVCC
1.65
1.8/2.8/3.3 3.3
V
Input Current
Idd
-
25
30
mA
Input voltage 'H' level
VIH
0.7IOVCC
-
IOVCC
V
Input voltage 'L' level
VIL
0
-
0.3IOVCC V
Output voltage 'H' level
VOH
0.8IOVCC
-
IOVCC
Output voltage 'L' level
VOL
0
-
0.2IOVCC V
V
BACKLIGHT CHARACTERISTICS Item of backlight Symbol Min. Typ. Max. characteristics Vf 3.0 3.2 3.4 Forward voltage 6 Number of LED P Parallel Connection mode Using condition: constant current driving method If=90mA(+/-10%).
MULTI-INNO TECHNOLOGY CO.,LTD.
Unit V Piece -
Condition If=90mA -
P.6
Ver 1.0
MODULE NO.: MI0350B2T-1 ELECTRO-OPTICAL CHARACTERISTICS
Item of electro-optical characteristics
Symbol
Response time
Tr+ Tf
Contrast ratio
Cr
Min
Condition
Typ
Max
Unit
Remark Note
-
35
55
ms
Fig.1
4
300
850
-
---
FIG 2.
1
80
-
-
%
FIG 3.
3
210
270
-
cd/m2 FIG 3.
2
Viewing angle θ range
∅ = 90° ∅ = 270° ∅ = 0° ∅ = 180°
80 80 80 80
-
-
deg deg deg deg
6
NTSC ratio
---
-
66
-
%
θ=0° ∅=0° Ta=25V
0.5743 0.3044 0.2804 0.5679 0.0950 0.0223 0.2334 0.2492
0.6243 0.3544 0.3304 0.6179 0.1450 0.0723 0.2934 0.3092
0.6743 0.4044 0.3804 0.6679 0.1950 0.1223 0.3534 0.3692
Luminance uniformity
δ WHITE
Surface Luminance
Lv
---
Red x Red y Green x CIE (x, y) Green y chromaticity Blue x Blue y White x White y
θ=0° ∅=0° Ta=25
-
FIG 4. FIG 4 FIG 4 FIG4. -
FIG 3.
-
5
Note1. Contrast Ratio(CR) is defined mathematically by the following formula. For more information see FIG 2.: AverageSurface Luminance with all white pixels ( P 1, P2, P 3, P4, P5 ) ContrastRatio = Average SurfaceLuminance with all black pixels ( P1, P2, P 3, P4, P5) Note2. Surface luminance is the LCD surface from the surface with all pixels displaying white. For more information see FIG 3. Lv = Average Surface Luminance with all white pixels (P1, P2, P 3,P4, P5,P6,P7,P8,P9) Note3. The uniformity in surface luminance Wδ WHITEY is determined by measuring luminance at each test position 1 through 9, and then dividing the maximum luminance of 9 points luminance by minimum luminance of 9 points luminance. For more information see FIG 3.
MULTI-INNO TECHNOLOGY CO.,LTD.
P.7
MODULE NO.: MI0350B2T-1
Ver 1.0
Note4. Response time is the time required for the display to transition from White to black(Rise Time, Tr) and from black to white(Decay Time, Tf). For additional information see FIG 1.. Note5. CIE (x, y) chromaticity , The x,y value is determined by average of (P1, P2, P 3,P4, P5,P6,P7, P8,P9) . For more information see FIG 3. Note6. Viewing angle is the angle at which the contrast ratio is greater than a specific value. For TFT module, the specific value of conrast ratio is 10; For monochrome and color stn module, the specific value of conrast ratio is 2. The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface. For more information see FIG 4. Note7. For Viewing angle and response time testing, the testing data is base on Autronic-Melchers’s ConoScope. Series Instruments. For contrast ratio, Surface Luminance, Luminance uniformity and CIE, the testing data is base on CS-2000 photo detector. Note8. For TN type TFT transmissive panel viewing angle
module, Gray scale reverse occurs in the direction of
FIG.1.
The definition of Response Time
FIG.2.
Measuring method for Contrast ratio
MULTI-INNO TECHNOLOGY CO.,LTD.
P.8
MODULE NO.: MI0350B2T-1 FIG.3. Measuring method for chromaticity
FIG.4.
Ver 1.0
surface luminance, Luminance uniformity,CIE (x, y)
The definition of viewing angle
MULTI-INNO TECHNOLOGY CO.,LTD.
P.9
Ver 1.0
MODULE NO.: MI0350B2T-1 INTERFACE DESCRIPTION
NO.
Symbol
I/O or connect to
Description
Power ground
1
GND
Power supply
2 3 4 5
YU(NC) XR(NC) YD(NC) XL(NC)
-
6
VCC
Power supply
7
VCC
Power supply
8
IOVCC
Power supply
9
LCDPWM
O
10 11 12 13 14
TE IM0 IM1 IM2 IM3
O I I I I
15
RESET
I
16
DB23
I/O
17
DB22
I/O
18
DB21
I/O
19
DB20
I/O
20
DB19
I/O
21
DB18
I/O
22
DB17
I/O
23
DB16
I/O
MULTI-INNO TECHNOLOGY CO.,LTD.
When not in use -
No connection No connection No connection No connection A power supply for the analog /logic power.VCC=2.3 to4.8V TYPE:3.3V A power supply for the analog /logic power.VCC=2.3 to4.8V TYPE:3.3V interface voltage supply. IOVCC=1.65 to 3.3V. TYPE:3.3V Backlight on/fff control pin. If use CABC function, the pin can connect to external LED driver IC. The output voltage range=0 to IOVCC. Tearing effect output signal. IM[3:0]: Select the interface mode. See NOTE 1. Reset pin. Setting either pin low initializes LSI. Must be reset after power is supplied. DB[23:00]: 24-bit data bus for MCU DB[23:00]: 24-bit data bus for MCU DB[23:00]: 24-bit data bus for MCU DB[23:00]: 24-bit data bus for MCU DB[23:00]: 24-bit data bus for MCU DB[23:00]: 24-bit data bus for MCU DB[23:00]: 24-bit data bus for MCU DB[23:00]: 24-bit data bus for MCU
interface. interface. interface. interface. interface. interface. interface. interface.
the
OPEN OPEN OPEN OPEN -
OPEN OPEN IOVCC/GN D OPEN OPEN OPEN OPEN OPEN OPEN OPEN OPEN
P.10
MODULE NO.: MI0350B2T-1 24
DB15
I/O
25
DB14
I/O
26
DB13
I/O
27
DB12
I/O
28
DB11
I/O
29
DB10
I/O
30
DB09
I/O
31
DB08
I/O
32
DB07
I/O
33
DB06
I/O
34
DB05
I/O
35
DB04
I/O
36
DB03
I/O
37
DB02
I/O
38
DB01
I/O
39
DB00
I/O
40
RD
I
41
WR
I
42
RS
I
43
CS
I
44
DSI_LDO_ EN
I
MULTI-INNO TECHNOLOGY CO.,LTD.
DB[23:00]: 24-bit data bus for MCU interface. DB[23:00]: 24-bit data bus for MCU interface. DB[23:00]: 24-bit data bus for MCU interface. DB[23:00]: 24-bit data bus for MCU interface. DB[23:00]: 24-bit data bus for MCU interface. DB[23:00]: 24-bit data bus for MCU interface. DB[23:00]: 24-bit data bus for MCU interface. DB[23:00]: 24-bit data bus for MCU interface. DB[23:00]: 24-bit data bus for MCU interface. DB[23:00]: 24-bit data bus for MCU interface. DB[23:00]: 24-bit data bus for MCU interface. DB[23:00]: 24-bit data bus for MCU interface. DB[23:00]: 24-bit data bus for MCU interface. DB[23:00]: 24-bit data bus for MCU interface. DB[23:00]: 24-bit data bus for MCU interface. DB[23:00]: 24-bit data bus for MCU interface. DBI Type-A: 0: Read/Write disable, 1: Read / Write enable. DBI Type-B: Serves as a read signal and read data at the low level. DBI Type-B mode: Serves as a write signal and write data at the low level.DBI Type-A mode: 0: Read/Write disable, 1: Read / Write enable. Command/data select signal. Low: Select command High: Select data Chip select signal. Low: Select (Accessible) High: Not Select (Inaccessible) Control signal of DSI_LDO. The default setting is low. High: Disable the DSI_LDO. Low: Enable the DSI_LDO.
Ver 1.0 OPEN OPEN OPEN OPEN OPEN OPEN OPEN OPEN OPEN OPEN OPEN OPEN OPEN OPEN OPEN OPEN IOVCC/OP EN IOVCC/OP EN IOVCC/OP EN IOVCC/GN D IOVCC/GN D P.11
Ver 1.0
MODULE NO.: MI0350B2T-1 45
GND
Power supply
46
DSI_D0N
I
47
DSI_D0P
I
48 49 50
GND DSI_CLKN DSI_CLKP
Power supply I I
MIPI-DSI Data differential signal input pins. (Data lane 0) MIPI-DSI Data differential signal input pins. (Data lane 0) Power ground MIPI-DSI CLOCK differential signal input pins. MIPI-DSI CLOCK differential signal input pins.
51
GND
Power supply
Power ground
52
DSI_D1N
I/O
53
DSI_D1P
I/O
54
GND
55
LEDA
56
LEDK1
57
LEDK2
58
LEDK3
59
LEDK4
60
LEDK5
61
LEDK6
Power supply LED DRIVER LED DRIVER LED DRIVER LED DRIVER LED DRIVER LED DRIVER LED DRIVER
MULTI-INNO TECHNOLOGY CO.,LTD.
Power ground
MIPI-DSI Data differential signal input pins. (Data lane 1) MIPI-DSI Data differential signal input pins. (Data lane 1) Power ground
OPEN GND GND GND GND GND GND -
LED ANODE
OPEN
LED CATHODE
OPEN
LED CATHODE
OPEN
LED CATHODE
OPEN
LED CATHODE
OPEN
LED CATHODE
OPEN
LED CATHODE
OPEN
P.12
MODULE NO.: MI0350B2T-1
Ver 1.0
Note1:
REFERENCE APPLICATION CIRCUIT Please consult our technical department for detail information.
MULTI-INNO TECHNOLOGY CO.,LTD.
P.13
Ver 1.0
MODULE NO.: MI0350B2T-1 RELIABILITY TEST CONDITIONS No.
Test Item
Test Condition
Inspection after test
1
High Temperature Storage
8082V/200 hours
2
Low Temperature Storage
-3082V/200 hours
3
High Temperature Operating 7082V/120 hours
4
Low Temperature Operating
-2082V/120 hours
5
Temperature Cycle storage
-2082V~25~7082V