References:

User and Installation Manual

DT2LRJ12

LAND ROVER DVBT

SW: 1.0.1P

For RR Touch Screens > 2012

v.4.3

Compatible with all LAND ROVER cars with 8,2” Touch Screens > 2012

Radio o Navigation Systems Supported: RR EVOQUE Touch Screen 2012 > Touch Screen 8,2” without Navigation System Touch Screen 8,2” with Navigation Premium

Compatible Cars: Range Rover Range Rover Land Rover Land Rover Land Rover

EVOQUE SPORT DISCOVERY 4 FREELANDER RANGE

2012> 2012> 2012> 2013> 2014>

LAND ROVER DVBT TOUCH SCREEN > 2012 Plug & Play Connection (DT2LRJ12) – EVOQUE / SPORT/ D4

BASIC USE AND MAIN FUNCTIONS

3

General Information

3

Features of DVBT

3

Safety and Security Information

4

About Security

4

Placing the Interface

4

Tech. Specifications

4

Warranty and Updates

5

INTRODUCTION

5

Legal Information

5

Prior to installation

5

Delivery contents

5

CHECK COMPATIBILITY OF VEHICLE AND ACCESSORIES

6 1

Setting the dip switches of the CAN-box TV-500

6

Setting the dip switches of the tuner-box DT2C-M717

6

LED‘s of the tuner-box DT2C-M717

6

CONNECTION SCHEMA

7

INSTALLATION

9

Interconnecting tuner-box, CAN-box and harnesses

9

Connections to the factory monitor

9

Antennas and IR-remote control set

10

USB-AV-Player

11

Connecting peripheral devices

11

After-market rear-seat-entertainment Conax converter After-market rear-view camera

Page

OPERATION

2

12 13 13

14

Activation of the video-in-motion function

14

Selecting the dvbLOGiC as current AV-source

14

Control of the internal DVB-T tuner

14

Channel search Channel list Switching the channels by steering-wheel Selecting favourites EPG Teletext

Control of the internal USB AV-player

14 15 15 16 16 16

16

STAGEMOTION, S.L. C/ Los Orfebres, Nº10 (Parcela 129) - Polígono Industrial San Antolín - 34004 - Palencia (Spain) C.I.F.: ES-B47584982 Tel.: +(34) 979 113 200 – Fax: +(34) 979 115 666 - www.stagemotion.com [email protected]

Basic Use and Main Functions General Information Congratulations, you have acquired the new dvbt Tuner for Land Rover cars with 8,2” touch screen. This DVBT leaves to you to get the TV function like OEM from factory, and seing the video in movement. It will also allow connecting a rear view camera, without interfering in any case where the signal speed or revolutions navigation equipment used for precise operation. First, note that the installation of this interface can only be performed on vehicles that use a 12V battery. In particular take special care in vehicles such as 4x4, diesel trucks or commercial vehicles, which typically use 24V batteries. In this type of vehicle is not possible to use this interface, although the vehicles incorporated supported by a 12V battery which does not have this problem. Ensure that any relevant device for the safety of the vehicle has been damaged during installation and that all the warning lights of his instrument as well. Ensure you have removed the ignition key for safety, you should remove the battery terminal to protect electronic equipment during installation. This type of interface is designed for use in vehicles referred to in this document, also using the connections shown. Stagemotion, SL not assume any responsibility for the misuse or incorrect installation interface, and the damage they could do to other teams in the vehicle. Please note that this device uses and processes the output shown in the MOST or CAN data bus of the vehicle. If the vehicle manufacturer specifications changes both the instrument panel and navigation systems, or who carry out firmware updates on the Navigator or Instrument Panel, the interface may stop working properly, failure is not covered by the guarantee to be due to external agents at the same interface. If the manufacturer of your vehicle is not in accordance with the installation of this interface based on warranty, Stagemotion, SL assumes no warranty of the equipment in their vehicles, so check the conditions of your warranty before installing. The manufacturer reserves the right to change the device specifications without notice.

Warning: In many countries, traffic rules do not allow the driver to display screens with videos, TV or Internet access on the move and while driving, as it can cause distraction and therefore a hazard to occupants or other road users. The driver is responsible for damage to persons or property that may cause the misuse of this interface. Stagemotion, SL assume no responsibility for improper use.

Features of DVBT

• • • • • • •

Plug and Play wires for an automatic connection Automatic TV Free activation. If the car install from factory OEM Navigation system, also you will be able to see the TV free of the original DVD Player and USB Port although not available dual screen VIEW in the car. Touch control of DVBT functions. Original OEM Screen OSD Menus, Original Cluster TV information TV Free function for TV, USB and DVD Connax connection for PPV 1 Audio Video Output (Oudio Output by the OEM AUX input of the RR original radio system) 1 Video input special designed for Aftermarket Rear Camera. The rear camera view is activated in all Radio Levels. 100% compatible with all OEM SYSTEMS and FUNCTIONS 100% compatible with touch 8,2” screens and also with Original Navigation Premium.

Warning: The TV Free function is 100% compatible with the navigation function, so that while you are viewing video or image on-road navigation option will remain ON if you have an original navigation system

Page

• •

3

STAGEMOTION, S.L. C/ Los Orfebres, Nº10 (Parcela 129) - Polígono Industrial San Antolín - 34004 - Palencia (Spain) C.I.F.: ES-B47584982 Tel.: +(34) 979 113 200 – Fax: +(34) 979 115 666 - www.stagemotion.com [email protected]

LAND ROVER DVBT TOUCH SCREEN > 2012 Plug & Play Connection (DT2LRJ12) – EVOQUE / SPORT/ D4

Safety and Security Information

Please read these instructions before using the equipment and keep them for future reference. • • • • • • • • •

Read this manual thoroughly and carefully before operating the interface. Keep this manual handy as a reference point for use and to safely operate the equipment. Pay special attention to safety warnings in this manual Do not allow other users to operate the equipment without having read the instructions. Do not block air vents or equipment to operate at the right temperature and properly dissipate the heat generated by avoiding overheating. Pay special attention to driving and obey traffic rules. If the operation of the system difficult to focus on driving, park your vehicle and make the necessary adjustments. Do not place other objects on or below this block the ventilation equipment. Do not place the computer near liquids because if liquids are spilled they can be shorted. Remember that in the normal use of this equipment engine must be started to prevent battery drain.

About Security If the kit does not work properly, having worked flawlessly, unplug it for safety and contact the service. If you spill liquid or a solid element within the computer, unplug the interface and contact your service representative before connecting again.

Placing the Interface Do not place the equipment or antennas on points which could hinder the driver's view or at points where it could interfere with the correct operation of other vehicle systems such as Air Bags or lighting systems. Neither team put points on the driver that makes it difficult to handle other devices of the vehicle. The location of the interface logic is behind the touchscreen unit.

Page

Tech. Specifications

4

Operation voltage Stand-by power drain Operation power drain Power consumption Temperature range Weight Measurements (box only) B x H x T

10.5 – 14.8V DC 2012 Plug & Play Connection (DT2LRJ12) – EVOQUE / SPORT/ D4

2pcs. antenna ANT-12

Check compatibility of vehicle and accessories Requirements Vehicle Range Rover Evoque L538, Range Rover Sport L320 ab Modelljahr 2012, Discovery4 L319 ab Modelljahr 2012, Range Rover (Vogue) L322 ab Modelljahr 2013, Freelander 2 L359 ab Modelljahr 2013 Navigation

Touch-Screen Infotainment Version 3

Limitations Factory-TV-tuner

Must NOT be installed. If uninstalled, optical ring must be closed.

After-market rear-view cam necessary to connect.

Compatible with NTSC cameras only. Optionally available adapter is

Setting the dip switches of the CAN-box TV-500 Vehicle/ navigation Land Rover without rear-view camera Land Rover with rear-view camera

Dip 1 ON

Dip 2 OFF

Dip 3 ON

Dip 4 OFF

Dip 5 ON

Dip 6 ON

ON

ON

ON

OFF

ON

ON

Note: Dip switch functions of the TV-500 Dip 1 – activation TV-free Dip 2 – rear-view camera existing Dip 3 – TV icon simulation Dip 4 – no function Dip 5 – CAN-bus termination resistor on the vehicle side Dip 6 – CAN-bus termination resistor on the head-unit side Setting dip 2 to ON codes the factory rear-view camera input which is located on the brown Fakra male connector of the factory monitor. When reverse gear is engaged, the navigation will automatically switch to this input. On vehicles with factory rear-view camera set Dip 2 to ON, too.

Setting the dip switches of the tuner-box DT2C-M717 The 3 dip switches of the tuner-box DT2C-M717 are without function. The dip switch settings are: Dip1 = OFF Dip2 = OFF Dip3 = OFF

Page

LED‘s of the tuner-box DT2C-M717

6

STAGEMOTION, S.L. C/ Los Orfebres, Nº10 (Parcela 129) - Polígono Industrial San Antolín - 34004 - Palencia (Spain) C.I.F.: ES-B47584982 Tel.: +(34) 979 113 200 – Fax: +(34) 979 115 666 - www.stagemotion.com [email protected]

Page

Connection schema

7

STAGEMOTION, S.L. C/ Los Orfebres, Nº10 (Parcela 129) - Polígono Industrial San Antolín - 34004 - Palencia (Spain) C.I.F.: ES-B47584982 Tel.: +(34) 979 113 200 – Fax: +(34) 979 115 666 - www.stagemotion.com [email protected]

Page

LAND ROVER DVBT TOUCH SCREEN > 2012 Plug & Play Connection (DT2LRJ12) – EVOQUE / SPORT/ D4

8

STAGEMOTION, S.L. C/ Los Orfebres, Nº10 (Parcela 129) - Polígono Industrial San Antolín - 34004 - Palencia (Spain) C.I.F.: ES-B47584982 Tel.: +(34) 979 113 200 – Fax: +(34) 979 115 666 - www.stagemotion.com [email protected]

Installation Switch off ignition and disconnect the vehicle’s battery! If according to factory rules disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a resistor lead. Place of installation is behind the factory navigation monitor.

Interconnecting tuner-box, CAN-box and harnesses

1.

Connect harness CAB-AV-6P to 6pin Molex of tuner-box DT2C-M717.

2.

Connect harness DT2C-LR02 to 8pin Molex of CAN-box TV-500.

3.

Connect harness DT2C-LR02 to 14pin Molex of tuner-box DT2C-M717.

4.

Connect male MOST®-connector of harness DT2C-LR02 into female MOST®-socket of tuner-box DT2C-M717.

Page

Connections to the factory monitor

9

STAGEMOTION, S.L. C/ Los Orfebres, Nº10 (Parcela 129) - Polígono Industrial San Antolín - 34004 - Palencia (Spain) C.I.F.: ES-B47584982 Tel.: +(34) 979 113 200 – Fax: +(34) 979 115 666 - www.stagemotion.com [email protected]

LAND ROVER DVBT TOUCH SCREEN > 2012 Plug & Play Connection (DT2LRJ12) – EVOQUE / SPORT/ D4

1.

Transfer female 16pin connector vehicle harness from rear of factory monitor into the 16pin male connector of harness DT2C-LR02.

2.

Transfer male MOST®-connector of vehicle harness from rear of factory monitor into harness DT2CLR02.

3.

Plug female 16pin connector of DT2C-LR02 into male socket of factory monitor.

4.

Plug male MOST®-connector of DT2C-LR02 into male MOST®-socket of factory monitor.

5. 6.

Connect female Fakra connector of harness DT2C-LR02 to the brown Fakra connectors on the rear of the factory monitor.

Page

Antennas and IR-remote control set

10

Mount antennas ANT-12 and connect them to the female f-plug connectors on front of tuner-box DT2C-M717.

STAGEMOTION, S.L. C/ Los Orfebres, Nº10 (Parcela 129) - Polígono Industrial San Antolín - 34004 - Palencia (Spain) C.I.F.: ES-B47584982 Tel.: +(34) 979 113 200 – Fax: +(34) 979 115 666 - www.stagemotion.com [email protected]

We strongly recommend to first test the reception quality of the chosen mounting position of the antennas before final installation! See “Appendix B – Antenna positioning” for additional information. The C3-IRSET consists of the external C3C-SENSOR IR-sensor and the C3C-RC IR-remote control and can be used to control the dvbLOGiC’s internal DVB-T tuner functions additionally to the control through the navigations buttons. Connect the C3C-SENSOR to the female black/red/blue 3pin AMP connector of harness DT2C-LR02 and locate the sensor in an accessible place. Note: To use the teletext function of the dvbLOGiC’s internal DVB-T tuner and the internal USB-AVplayer, the C3-IRSET is necessary.

USB-AV-Player

1.

Connect the USB extension USBC-EXT to the USB-port on the rear of the tuner-box DT2C-M717.

2.

Connect USB-media (up to 2TB, FAT32 and NTFS) to the USB-port of the USB-extension cable USBC-EXT.

Connecting peripheral devices It is possible to connect rear-seat-entertainment and a Conex converter to the dvbLOGiC Tuner.

Page

Before final installation of the peripheral devices, we recommend to test-run the dvbLOGiC functions to detect incompatibility of vehicle, navigation, factory accessories or peripheral devices as soon as possible.

11

STAGEMOTION, S.L. C/ Los Orfebres, Nº10 (Parcela 129) - Polígono Industrial San Antolín - 34004 - Palencia (Spain) C.I.F.: ES-B47584982 Tel.: +(34) 979 113 200 – Fax: +(34) 979 115 666 - www.stagemotion.com [email protected]

LAND ROVER DVBT TOUCH SCREEN > 2012 Plug & Play Connection (DT2LRJ12) – EVOQUE / SPORT/ D4

After-market rear-seat-entertainment

Using RCA-cables, connect the rear-seat-entertainment to the female RCA-connector of harness CAB-AV-6P. Note: As the output is a full output, not shared with the video signal for the navigation system, splitting the video with an RCA Y-cable might give a good enough picture for two rear-seatentertainment monitors. If not, or if connecting more than two monitors, use a video splitter.

Page

The pink ACC-output wire (+12V max 1A) of harness DT2C-LR02 can be connected to the ACC-input wires of the rear-seat entertainment to switch it on. It carries +12V when the navigation computer is running.

12

STAGEMOTION, S.L. C/ Los Orfebres, Nº10 (Parcela 129) - Polígono Industrial San Antolín - 34004 - Palencia (Spain) C.I.F.: ES-B47584982 Tel.: +(34) 979 113 200 – Fax: +(34) 979 115 666 - www.stagemotion.com [email protected]

Conax converter

Connect the micro-USB-port of the optionally available Conax converter (e.g. DVBTC-CONAX) to the micro-USB-port on the rear of tuner-box DT2C-M717.

After-market rear-view camera

1.

Connect video-output of after-market rear-view camera to female RCA-connector of optional adapter CAB-TVAS20.

2.

Connect female Fakra connector of adapter CAB-TVAS20 to the purple male Fakra connector on the rear of the factory monitor.

3.

Connect the green wire of DT2-LR02 to the camera power supply (+12V max. 1A) The green wire is high (+12V) when reverse gear is engaged.

Page

Note: Compatible with NTSC cameras only.

13

STAGEMOTION, S.L. C/ Los Orfebres, Nº10 (Parcela 129) - Polígono Industrial San Antolín - 34004 - Palencia (Spain) C.I.F.: ES-B47584982 Tel.: +(34) 979 113 200 – Fax: +(34) 979 115 666 - www.stagemotion.com [email protected]

LAND ROVER DVBT TOUCH SCREEN > 2012 Plug & Play Connection (DT2LRJ12) – EVOQUE / SPORT/ D4

Operation Activation of the video-in-motion function The video-in-motion function is activated permanently without disturbing the navigation performance.

Selecting the dvbLOGiC as current AV-source

Enter menu Audio/Video and then select TV to select the dvbLOGiC as current AV-source.

Control of the internal DVB-T tuner

The internal DVB-T tuner can be controlled by touch. The functions of the touch are corresponding with the OEM control and the options will be displayed.

Channel search

Page

Enter menu TV and then select + and after it DTV2 – Digital. StartScan will start the channel search, StopScan will stop the channel search.

14

STAGEMOTION, S.L. C/ Los Orfebres, Nº10 (Parcela 129) - Polígono Industrial San Antolín - 34004 - Palencia (Spain) C.I.F.: ES-B47584982 Tel.: +(34) 979 113 200 – Fax: +(34) 979 115 666 - www.stagemotion.com [email protected]

Channel list

After a successful channel search the channel list is available in the channel list in the TV menu and can be selected by touch.

Switching the channels by steering-wheel

It is possible to switch the channels by arrow-buttons on left hand site of the steering-wheel. Long press – Switching up/down channel list Short press – Switching up/down favourites

Page

Steering-wheel left

15

STAGEMOTION, S.L. C/ Los Orfebres, Nº10 (Parcela 129) - Polígono Industrial San Antolín - 34004 - Palencia (Spain) C.I.F.: ES-B47584982 Tel.: +(34) 979 113 200 – Fax: +(34) 979 115 666 - www.stagemotion.com [email protected]

LAND ROVER DVBT TOUCH SCREEN > 2012 Plug & Play Connection (DT2LRJ12) – EVOQUE / SPORT/ D4

Selecting favourites

Enter menu TV and then select + and after it DTV1 – Digital. It is possible to store 6 favourites. Choose the favoured channel in the channel list and longpress the respective button (1-6) in menu DTV1 Digital. An acoustic signal will confirm the storage.

EPG

Even if the full screen mode is selected the EPG data will be shown on the display.

Teletext Teletext of the dvbLOGiC can only be used with the optionally available C3-IRSET remote control set.

Page

Control of the internal USB AV-player

16

STAGEMOTION, S.L. C/ Los Orfebres, Nº10 (Parcela 129) - Polígono Industrial San Antolín - 34004 - Palencia (Spain) C.I.F.: ES-B47584982 Tel.: +(34) 979 113 200 – Fax: +(34) 979 115 666 - www.stagemotion.com [email protected]

Page

The internal USB-AV-Player can be controlled by the included remote control. By pressing the HOME button while in TV mode the menu above can be displayed and Movie, Music or Photo of the USB-source can be selected.

17

STAGEMOTION, S.L. C/ Los Orfebres, Nº10 (Parcela 129) - Polígono Industrial San Antolín - 34004 - Palencia (Spain) C.I.F.: ES-B47584982 Tel.: +(34) 979 113 200 – Fax: +(34) 979 115 666 - www.stagemotion.com [email protected]