Lab Automation Control Systems An OK RPM Product By

E&I

All Lab Automation Control System products are factory assembled and certified to UL 5O8A standards.

Page 5 rev version A - less red

H&A LCAS Logo #4Pg5 051716-2 Page 5 rev version A - less red

1

1

We have been building automation packages for We have been building automation packages over 30 years. for over 30 years.

E&I Sales, our manufacturing partner has been E&I Sales,multiple our manufacturing partner has beensystems building types of automation control building multiple types of automation control which are factory assembled, tested and UL systems 508A which are control factory systems assembled, tested UL 508A certified for over 30and years. Lab certified control systems for over years. Automation Control Systems are30built andLab designed Automation Systems arefor built and to provide aControl safe environment both thedesigned instructor toand provide a safe environment for occupants. both the instructor the institution’s students and and the institution's students and occupants. Lab Automation Control Systems’ panels are built using current state of the art automation from vendors such as Siemens™. By using this technology Lab Automation Control System is able to provide a system which meets your requirements as specified, Lab Automation Systems' are built as well as easy Control modifications in panels the field. using current state of the art automation from vendors such Siemens™. By using this technology Labteams Lab as Automation Control Systems offers design Automation Systems is able components, to provide a to and ownersControl a full range of system system which meets yourasrequirements as specified. meet any requirements well as relevant codes and standards. Lab Automation Control Systems offers design teams and owners a full range of system components, to meet any requirements as well as relevant codes and standards.

Lab Automation Control Systems (LACS) reserves the Lab Automation Control Systems (LACS) reserves the right to correct any errors, inaccuracies or omissions right to correct any errors, inaccuracies or omissions and to change or update information at any time and to change or update information at any time without prior notice. without prior notice.

2 2

Page 5 rev version - less Page 5 rev version A -Aless redred H&A LCAS Logo #4Pg5 051716-2 Page 5 rev version A - less red

1

1 1

optional designs areare available to meet required E&I Lab Sales, ourAutomation manufacturing partner has been OtherOther optional designs available totomeet The Control Systems' Panel (LCP) (LCP) is a is aOther optional designs are available meet required required TheAutomation Lab Control Systems' Panel budgetary numbers for any customer whether in building multiple types of automation control systems budgetary numbers for any customer whether inin device which safely regulates various utilities in budgetary numbers for any customer whether device which safely regulates various utilities in science classrooms where any of the following education, research, medical, or institutional. whichscience are factory assembled, tested and UL 508A education, research, medical, or institutional. classrooms where any of the following education, research, medical, or institutional. certified control systems for over 30 years. Lab combinations are active. These services either single or combinations are active. These services either single or Automation Control built andelectrical designed to The panel panel can be be customized with options options that that multiple are gas, coldare water, and The can customized with that multiple arehotwater, gas,Systems hotwater, cold water, and electrical The panel can be customized with options provide a safe environment for both the instructor and includes a run time option for both the solenoid outlets. The utilities are controlled by multiple types of a run atime for both outlets. The utilities are controlled by multiple types of includes includes run option time option for the bothsolenoid the solenoid the institution’s students and occupants. valves, electrical contactors, teachers demodemo table,table, as as control panelspanels utilitizing either a (PLC) whichwhich provides electrical contactors, teachers demo table, as control utilitizing either a (PLC) provides valves, valves, electrical contactors, teachers well as an allotted run time for the fan. an electronic signal to all utilities to enable or disable or anas allotted run time theforfan. an electronic signal to all utilities to enable or disable orwell as well an allotted run for time the fan. through a set ofa set relays and contacts as selector required by theby the Standard features a keyed switch through ofinclude relays and contacts as required owner. whichowner. restricts the activation of utilities to the key holder, connection to fire alarms as well as connections to the facilities energy management system, (BMS). This provides aa safe environment Standard features include a keyed selector switchswitch Standard features include keyed selector for students and other occupants of the space. It whichwhich restricts the activation of utilities to the restricts the activation of utilities to the also houses illuminated push buttons to show which key holder, connection to firetoalarms as well key holder, connection fire alarms as as well as systems are enabled and an emergency stop button. connections to the facilities energy management connections to the facilities energy management system, (BMS). This provides a safea environment system, (BMS). This provides safe environment for students and other occupants of theofspace. It for students and other occupants the space. It also houses illuminated push buttons to show which also houses illuminated push buttons to show which systems are enabled and an emergency stop button. systems are enabled and an emergency stop button.

All Lab Lab Automation Control System All Control System AllAutomation Lab Automation Control System products are factory factory assembled and and products are assembled and products are factory assembled certified to UL UL 5O8A 5O8A standards. certified to standards. certified to UL 5O8A standards.

3 4

4

Page 5 rev version A - less red

H&A LCAS Logo #4Pg5 051716-2 Page 5 rev version A - less red

1

LCP LCP

Single Classroom Lab Control Panel Single Classroom Lab Control Panel

1

The Lab Control Panel (LCP) is a UL approved single classroom model. A keyed service switch restricts the The ability Lab Control Panelthe (LCP) is aservices UL approved single to activate utility to the key holder. classroom model. keyedenvironment service switch This results in aAsafer for restricts students the and ability to activate the The utility services to thebekey holder. other occupants. panel can also configured This with results in a safer environment forconfigured students and a non-keyed service switch, to limit otherfunctionality occupants. based The panel alsofrom he configured on acan signal a building withmanagement a non-keyed system service and switch, configured to limit configured to shut down functionality based on a of signal fromfrom a building utilities upon receipt a signal a building management system and configured shut down alarm. Dual classroom and touchtoscreen models are utilities receipt of a signal from a building alsoupon available. alarm. Other optional features are also available.

Standard Features Standard Features • Programmable logic controller by Siemens™ • • • • • • • • • • • • • • •

• Flush mounted NEMA 1 panel with white powder coat finish. Programmable logic controller by Siemens™ • Piano-24 hinged Controls VDC.panel door with finger tab access and keyed latch. Flush mounted NEMA 1 panel with white powder coat • Two position keyed selector switch (panel enable/off) finish. push/pull operator. • Remote Piano hingedstop panel door with finger tab access and on/off push buttons for each utility (gas , • Illuminated keyed latch. hot water,keyed cold selector water and electricity). Two position switch (panel enable/off) • Connection to fire alarms. Remote stop push/pull operator. • Connection to Building Energy Management System Illuminated on/off push buttons for each utility (gas , hot water, cold water and electricity). (BMS). • Circuit Breakers. Connection to fire alarms. • Fan enable disable.Energy Management System Connection to Building • Designated discrete inputs and relay outputs. (BMS). • Terminal ground. System powerblocks supplywith -120 VAC input, 24 VDC, 5A • ULwith 508A certified. output primary and secondary circuit protection. • enable Assembled, wired and tested with full set of assembly Fan disable. drawings and electric Designated discrete inputs schematics. and relay outputs. • Five blocks year limited parts warranty (with factory start-up). Terminal with ground. UL 508A certified. Assembled, wired and tested with full set of assembly drawings and electric schematics. Five year limited parts warranty (with factory start-up).

Optional Items Optional Items • (FT) Fan Timer • • • •

(DT) Teacher’s Demo Table • Predetermined (FT) Fan Timer LCP Run Time (RT) Teacher’s Table • (DT)Brushed (SSDT) SS Demo Door and Trim Predetermined LCP Run Time • (RT) (SS) Brushed SS • (SSDT) Brushed SS Door and Trim • (SS) Brushed SS

All Lab Automation Control System products are factory assembled and certified to UL 5O8A All Lab Automation Controlstandards. System products are factory assembled and certified to UL 5O8A standards.

4

Page 5 rev version A - less red

1

Lab Automation Control Systems Single LCP Panel Selection & Model Number

Sample Selection & Model Number:

LCP-__-__-__-__-__-__-____-____-____-____

LCP-2-G-E-DT

Model Number

Lab control panel for single classroom control of two utilities (gas and electricity) teacher’s demo table enable/disable.

• • • •

(1) (2) (3) (4)

One Utility Two Utilities Three Utilities Four Utilities

Utilities • • • •

(G) Gas (HW) Hot Water (CW) Cold Water (E) Electricity

Panel Options

• (FT) Fan Timer • (DT) Teacher’s Demo Table • (RT) Predetermined LCP Run Time

All Lab Automation Control System products are factory assembled and certified to UL 5O8A standards.

5

Page 5 rev version A - less red

1

LAB AUTOMATION CONTROL SYSTEMS - LAB CONTROL PANEL SUBMITTAL PROJECT NAME_________________________________________________________ LAB AUTOMATION CONTROL SYSTEMS - LAB CONTROL

1

PANEL SUBMITTAL

LOCATION_____________________________________________________________ PROJECT NAME_________________________________________________________ CONTRACTOR__________________________________________________________ LOCATION_____________________________________________________________ DATE_______________________ CONTRACTOR__________________________________________________________ MODEL # LCP-___-__-__-__-__-___-___-___ DATE_______________________ MODEL # LCP-___-__-__-__-__-___-___-___

Standard Features Programmable logic controller by Siemens™ Flush mounted NEMA 1 panel with white powder coat finish. Piano hinged panel door with finger tab access, and keyed latch Two position keyed selector switch (panel enable/off) Remote stop push/ pull operator Illuminated On/Off push buttons for each utility (gas, hot water, cold water, and electricity) Connection to Fire Alarms Connection to Building Energy Management System (BMS) Circuit Breaker Fan enable/disable Designated discrete inputs and relay outputs Terminal blocks with ground UL508A certified Assembled, wired and tested with full set of assembly drawings and electric schematics Five year limited parts warranty (with factory start-up)

FOR MODEL SELECTION PLEASE ADD THE FOLLOWING AFTER LCP FOR MODEL SELECTION PLEASE ADD THE FOLLOWING AFTER LCP #OF UTILITIES (1,2,3,4) AFTER NUMBER OF UTILITIES PLEASE ADD TYPE OF UTILITY (G-HW-CW-E) #OF UTILITIES (1,2,3,4) AFTER NUMBER OF UTILITIES PLEASE ADD TYPE OF UTILITY (G-HW-CW-E)

6 77

Page 5 rev version A - less red

H&A LCAS Logo #4Pg5 051716-2 Page 5 rev version A - less red

1

MLCP Multiple Dual Classroom Lab Control Panel 1

MLCP

Multiple Classroom Lab Control Panel

The Multiple Lab Control Panel (MLCP) is a UL approved multiple classroom model which allows for classroom specific utility control of up to 4 The Multiple Lab Control Panel (MLCP) is a UL classrooms and 2 prep rooms from a single panel. approved multiple classroom model which allows for These panels are used in situations where a prep classroom specific utility control of up to 4 classrooms room is present which serves two classrooms. Each and 2 prep rooms from a single panel. These panels classroom and prep room will have it’s own operator are used in situations where a prep room is present typically installed next to the teacher’s desk and each which serves two classrooms. Each classroom and prep room as shown on drawings. Each membrane prep room will have it's own operator typically installed device is clearly labeled for individual control of next to the teacher's desk and each prep room as shown required utilities and is connected to the main control on drawings. Each membrane device is clearly labeled panel by an ethernet cable to reduce installed cost. for individual control of required utilities and is A keyed service switch is not requred to activate connected to the main control panel by an ethernet cable or reset the system, a predetermined sequence of to reduce installed cost. A keyed service switch is not operation allows the instructor to activate or reset the requred to activate or reset the system, a predetermined classroom’s utilities. This results in a safer environment sequence of operation allows the instructor to activate or for the students and other occupants. If requested reset the classroom's utilities. This results in a safer a lion-keyed service switch can also be provided, environment for the students and other occupants. If as well as functionality based on a signal from a requested a lion-keyed service switch can also be building management system and configured to provided, as well as functionality based on a signal power up or shut down utilities. Also upon receipt from a building management system and configured of a signal from a building alarm, all utilities will be to power up or shut down utilities. Also upon receipt disabled. of a signal from a building alarm, all utilities will be disabled.

Standard Features

• Programmable logic controller by Siemens™ Standard Features • Flush mounted NEMA 1 panel with white powder coat finish. • Piano Programmable logicdoor controller by Siemens™ • hinged panel with finger tab access and Controls -24 VDC. keyed latch. • Two Flushposition mounted NEMA 1 panel with(panel whiteenable/off) powder coat • keyed selector switch finish. stop push/pull operator. • Remote • Illuminated Piano hinged panel door with finger tabutility access and • on/off push buttons for each (cold keyed latch. water, hot water, gas and electricity). Individual classroom membrane panel by Siemens™ • Connection • to fire alarms. • Connection Remote stoptopush/pull operator. • Building Energy Management System • Illuminated on/off push buttons for each utility (cold (BMS). water, Breakers. hot water, gas and electricity). • Circuit • Fan Connection to fire alarms. • enable disable. • Designated Connectiondiscrete to Building Energy Management • inputs and relay outputs. System (BMS). • Terminal blocks with ground. • UL System supply -120 VAC input, 24 VDC, 5A • 508Apower certified. output with wired primary and secondary • Assembled, and tested with fullcircuit set ofprotection. assembly • drawings Fan enable disable. and electric schematics. • Five Designated discrete and relay outputs.start-up). • year limited partsinputs warranty (with factory • Terminal blocks with ground. • UL 508A certified. • Assembled, wired and tested with full set of assembly drawings and electric schematics. • Five year limited parts warranty (with factory start-up).

7

Optional Items Optional Items

• • • • • • • • • •

(FT) Fan Timer (DT)Fan Teacher’s (FT) Timer Demo Table (RT) Teacher’s Predetermined Run Time (DT) DemoLCP Table (SSDT) Brushed SSLCP Door and Trim (RT) Predetermined Run Time (SS) Brushed (SSDT) BrushedSSSS Door and Trim (SS) Brushed SS

All Lab Automation Control System products are factory assembled and certified to UL 5O8A standards. All Lab Automation Control System products are factory assembled and certified to UL 5O8A standards.

Page 5 rev version A - less red

1

Lab Automation Control Systems Multiple Classroom LCP Panel Selection & Model Number MLCP-__-__-__-__-__-__-____-____-____-____

Model Number Number of Classrooms & Prep • • • • •

(2) (3) (4) (5) (6)

Two Three Four Five Six

• • • •

(1) (2) (3) (4)

One Utility Two Utilities Three Utilities Four Utilities

Utilities • • • •

(G) Gas (HW) Hot Water (CW) Cold Water (E) Electricity

Panel Options • • • • •

(FT) Fan Timer (DT) Teacher’s Demo Table (RT) Predetermined LCP Run Time (SSDT) Brushed SS Door and Trim (SS) Brushed SS

Sample Selection & Model Number: MLCP-4-4-G-HW-CW-E-RT Lab control panel for dual classroom control of four utilities (gas, hot water, cold water, and electricity) predetermined MLCP run time.

All Lab Automation Control System products are factory assembled and certified to UL 5O8A standards.

8

Page 5 rev version A - less red

1

1

LAB AUTOMATION CONTROL SYSTEMS - MLCP - Multiple Classroom LAB CONTROL PANEL SUBMITTAL

PROJECT NAME_________________________________________________________ LOCATION____________________________________________________________ CONTRACTOR_________________________________________________________ DATE_______________________ MODEL # MLCP-__-__-__-__-___-___-___

Main Panel

Standard Features Features Standard Programmable logic logic controller by Siemens™Controls –24 VDC Programmable Siemens™ Flush mounted mounted NEMA NEMA 1 panel Flush panel with with white white powder powder coat coatfinish finish. Twoposition positionkeyed keyed selector selector switch (panel enable/off) Two enable/off) Remote stop push/pull Remote push/ pull operator operator Illuminated On/Off On/Off push push buttons buttons for for each utility (cold water, hot water, Illuminated water, gas gas and and electricity) electricity) Connection to to Fire Fire Alarms Connection Connection to to Building Building Energy Management Connection Management System System(BMS) (BMS) Fan enable/disable enable/disable Fan SystemBreaker power supply - 120 VAC input, 24 VDC, 5A output with primary and secondary Circuit circuit protection Designated discrete inputs and relay outputs Terminal blocks with ground UL508A certified Designated discrete inputs and relay with ground terminal block Assembled, wired and tested with fulloutputsTerminal set of assembly blocks drawings and electric schematics Assembled, wiredparts and tested with(with full set of assembly drawings and electric schematic Five Five year limited warranty factory start-up) year limited parts warranty (with factory start-up)

Options (-FT) Fan Timer (-SSL)Individual Selector Switch for each utility with Red LED Light (OFF) and Green LED Light (ON) (-D) Demo Lab (-RT) Pre-determined LCP Run Time (-SSTD) Brushed SS Door and Trim (-SS) Brushed SS

FOR MODEL SELECTION PLEASE ADD THE FOLLOWING AFTER LCP-2 NUMBER OF CLASSROOMS (1,2,3) NUMBER OF UTILITIES (1,2,3,4) AFTER NUMBER OF UTILITIES PLEASE ADD TYPE OF UTILITY (G-HW-CW-E)

SUBMITTAL

9

---------

NTS

Page 5 rev version A - less red

1

LCP-TS

Lab Control Panel with Touch Screen

The Lab Control Panel Touch Screen (LCP-TS) is a UL approved HMI touch screen operated lab control panel used to regulate the availability of utility services. Utilities included are domestic water, natural gas and electricity. Within the panel is a programmable logic controller (PLC) provided an electronic signal to solenoids or contactors housed in secondary panels to activate or deactivate the utilities as required. The LCP-TS is an HMI touch screen operated utility control panel which operates the function of one to four utilities in one to six classrooms. Each touch screen restricts the ability to activate the utility services. This results in a safer environment for all occupants. Standard features include fan operation, building management system connection, alarm connection and optional timers. Custom options are available.

Standard Features

Optional Items

• HMI personalized touch screen with LAN capability* • Programmable logic controller by Siemens™ . • Flush mounted NEMA 1 panel with white powder coat finish. • Piano hinged panel door with finger tab access and keyed latch. • Two position keyed selector switch (panel enable/off) • Remote stop push/pull operator. • Connection to fire alarms. • Connection to Building Energy Management System (BMS). • Circuit Breakers. • Fan enable disable. • Designated discrete inputs and relay outputs. • Terminal blocks with ground. • UL 508A certified. • Assembled, wired and tested with full set of assembly drawings and electric schematics. • Five year limited parts warranty (with factory start-up).

• • • • •

. .

(FT) Fan Timer (DT) Teacher’s Demo Table (RT) Predetermined LCP Run Time (SSDT) Brushed SS Door and Trim (SS) Brushed SS (WF) WiFi (CM) Cell Modem

All Lab Automation Control System products are factory assembled and certified to UL 5O8A standards.

10

Page 5 rev version A - less red

1

Lab Automation Control System - Touch Screen LCP Panel Selection & Model Number

Sample Selection & Model Number:

LCP-TS-__-__-__-__-__-__-____-____-____-____

LCP-TS-4-G-HW-E-WF

Classrooms Controlled

Utility control panel for four classroom control of gas, hot water, and electricity and wifi capable.

• • • • • •

(1) (2) (3) (4) (5) (6)

One Classroom Two Classrooms Three Classrooms Four Classrooms Five Classrooms Six Classrooms

Utilities • • • •

(G) Gas (HW) Hot Water (CW) Cold Water (E) Electricity

Panel Options

• (WF) WiFi Capability • (CM) Cell Modem

All Lab Automation Control System products are factory assembled and certified to UL 5O8A standards.

11

Page 5 rev version A - less red

1

LAB AUTOMATION CONTROL SYSTEMS - LAB CONTROL PANEL TOUCH SCREEN SUBMITTAL PROJECT NAME_________________________________________________________ LOCATION_____________________________________________________________ CONTRACTOR__________________________________________________________ DATE_______________________ MODEL # LCP-TS-___-__-__-__-__

LCP TOUCH SCREEN EXTERIOR LAYOUT

24"

30"

Keyed Latch

EMERGENCY STOP

Standard Features HMI personalized touch screen with LAN capability, programmable logic controller by Siemens™Controls –24 VDC Flush mounted NEMA 1 panel with white powder coat finish, piano hinged panel door with finger tab access Password protected touch screen operation. Features include fan operation, BMS connection, alarm connection and digital timers Independant controls up to four utilities per classroom (gas, hot water, cold water and electricity) Central control up to 6 classrooms Emergency stop push/pull operator System power supply - 120 VAC input. Designated discrete inputs and relay outputs Terminal blocks with ground terminal block UL 508A certified - Five year limited parts warranty (with factory start-up) Assembled, wired and tested with full set of assembly drawings and electric schematic

Options (-WF) WiFi Capability (-CM) Cell Modem

PLEASE ADD THE NUMBER OF CLASSROOMS CONTROLLED AFTER TS (1,2,3,4,5,6) PLEASE ADD THE NUMBER OF UTILITIES CONTROLLED AFTER THE NUMBER OF CLASSROOMS FOLLOWED BY THE TYPE OF SERVICE (CW,HW,G,E)

----------

NTS

12

Page 5 rev version A - less red

1

LSCP

Lab Solenoid Control Panel

The Lab Solenoid Control Panel (LSCP) is a UL and CSA certified panel designed to provide utility control in a single area typically located in the prep room. The panel houses the required solenoids and functions as a standalone system. For facilities looking to provide control and safety this panel offers a low cost alternative to systems with separate control and solenoid panels. The NEMA 1, white powder coated panel houses 120VAC solenoid valves for services required in sizes 1/2” through 3” diameter. Gas solenoid valves are UL rated for gas service. A service switch allows the ability to enable/ disable the utility services either by a single switch or by illuminated on/off push buttons for multiple utilities. Contact points are provided for connections to BMS, Fire Alarm, Electric Contactors, and Remote Emergency Operators. This panel is also available in a Division 1, Class 2 configuration for welding shop applications, as well as explosion proof cabinets to meet: UL classification; FM approved; CSA certification.

Standard Features

Optional Items

• Flush Mount, Semi-Recessed, and Surface Mount NEMA 1 panel with white powder coat finish • Piano hinged panel door with finger lab access and Keyed Latch • Two position keyed selector switch (panel enable/off) • Emergency stop push/pull operator • One on/off selector switch for all utilities served/ Multiple Push Buttons for individual utilities available as an option • One green LED .~ pilot light for all utilities served. • One red LED ‘Of’ pilot light for all utilities served. • Contact points for BMS, Fire Alarms, Remote Emergency Operators • Brass water connections • Black iron gas connections • ASCO™ gas solenoid valves are UL rated for gas service • Gas ball valves are UL rated for gas service • ASCO™ 120 VAC solenoid valves in sizes 1/2” through 3” diameter • Terminal Block Connections • Grommets provided for each utility service • UL 508A certified • Two year limited parts warranty

• • • • •

(E) Relay for Electric Panel (S) Wye strainers for water service (IS) Individual Utility Control (SSDT) SS Door & Trim (SS) Brushed SS

All Lab Automation Control System products are factory assembled and certified to UL 5O8A standards.

13

Page 5 rev version A - less red

1

Lab Automation Control Systems - Solenoid LCP Panel Selection & Model Number

Sample Selection & Model Number:

LSCP-__-__-__-__-__-__-____-____-____-____

LSCP-2-G-HW-.75-.5-T-E-S-IS

Panel Series

• Lab Solenoid Control Panel

Lab solenoid control panel with two solenoids (3/4” Gas and 1/2” Hot Water), contact for electric contactor panel, wye strainers, and individual illuminated push button on/off utility control.

Number of Solenoids • (1) One Solenoid • (2) Two Solenoids • (3) Three Solenoids

Solenoid Sizes (Cold Water/ Hot Water/Gas) • • • •

(G) Gas (HW) Hot Water (C) Cold Water .5”, .75”, 1”, 1.25”, 1.5”, 2”, 2.5”, 3”

Inlet Orientation • (B) Bottom inlet • (T) Top Inlet • (S) Side Inlet

Panel Options

• • • • • •

(E) Relay for Electric Panel (S) Wye Strainers for Water Service (SS) Brushed SS panel (SSD) Brushed SS Door/Trim (IS) Individual Utility Control (D1C2) Hazardous Locations

All Lab Automation Control System products are factory assembled and certified to UL 5O8A standards.

14

Page 5 rev version A - less red

1

LAB AUTOMATION CONTROL SYSTEMS - LSCP LAB SOLENOID CONTROL PANEL SUBMITTAL CONTRACTOR________________________________________ JOB NAME_____________________ DATE___________________MODEL # LSCP-___-__-__-__-__-___-___-__-__-___

20

Standard Features

Semi-Recessed, and Surface Mount NEMA 1 panel with white powder coat finish Piano hinged panel door with Keyed Latch Two position keyed selector switch (panel enable/off) Emergency stop push/pull operator Illuminated on/off selector switch for each utiliy served Contact points for BMS, Fire Alarms, Remote Emergency Operator Brass water connections Black iron gas connections ASCO gas solenoid valves are UL rated for gas service Gas ball valves are UL rated for gas service ASCO™ 120VAC solenoid valves in sizes ½" through 2" diameter Terminal Block Connections Grommets provided for each piped utility service UL 508A certified Two year limited parts warranty

EMERGENCY STOP

WATER

OFF

ON

ILLUMINATED SEL SW. OFF

ILLUMINATED SEL SW.

26

GAS

Options

ON

(-E)Contact For Electric Panel (-S) Wye Strainers for Water Service (-SSL) Individual Selector Switch for each Utility with Red (OFF) and Green (ON) Pilot Lights (-R) Rotate Valves to allow for smaller panel depth (-SSD) Brushed SS Door/Trim (-SS) Brushed SS Panel

KEYED LOCK FACTORY INSALLED

SPECIAL NOTES: PLEASE ADDTHE THENUMBER NUMBER OF VALVES PLEASE ADD OF VALVES REQUIRED AFTER (1,2,3,4) REQUIRED AFTERLSCP LSCP (1,2,3,4) PLEASE ADD AFTER THE PLEASE ADDTYPE TYPEOF OFSERVICE SERVICE AFTER THE NUMBER OF NUMBER OFVALVES VALVES(CW,HW,G) (G,HW,CW) PLEASE ADD BASED ONON 1ST PLEASE ADDVALVE VALVESIZES SIZES BASED 1ST 2ND POSITION HW, AND 3RD POSITION CW, G, 2ND POSITION HW, AND 3RD INDICATED ASAS POSITION G) CWVALVE VALVESIZE SIZE INDICATED FOLLOWS (A) 1/2",1”, (B)1.25”. - 3/4", (C) -2”, 1",2.5”, (D) -3”1 1/4", FOLLOWS .5”. -.75”, 1.50”, (E) - 1 1/2", (F) -INLET 2" PLEASE ADD INLET PLEASE ADD LOCATION (T)- TOP, (B) LOCATION (T)- TOP, (B) - BOTTOM (L) - LEFT BOTTOM SIDE (R) - RIGHT SIDE

4

18 END

END

END

24

GAS WATER

-------

X:\CAD DRAWINGS\CAD SUPPORT\E&I.png

NTS

15

Page 5 rev version A - less red

1

Companion Panels Companion panels work in conjunction with the Lab Automation Control Systems’ Lab Control Panels. The secondary panels include solenoid panels for water services both hot and cold, and natural gas; also included are electric contactors panels, remote operators, alarm beacons, and gas detection operator. Companion Panels are assembled and tested prior to shipping as a complete system with the Lab Automation Control Systems Lab Control Panels.

Instructor Demo Control Panel

Valve Panel

The Remote Emergency Operator (REO) is conveniently located either by the teacher’s desk or any exit to provide immediated shutdown of the entire system.

The Valve Panel (VP) is an assembled unit built per the project’s specifications to control any combination of gas, hot water and/or cold water. All solenoid valves, ball valves and piping are sized based on the project’s requirements. The ASCO™ solenoids arc UL Listed, CSA Certified and FM Approved.

Electric Contactor Panel

The Electric Contactor Panel (ECP) is available as typically specified, a stand alone panel. The ECP houses the electric contactors typically controlling restricted electric service to the student work stations.

16

In some applications where the facility wants to control the instructor’s demo table independently from the student work stations, a pre-assembled panel designed to provide utility service only to the teacher’s demo table. This panel (IDCP) is recommended

Remote Emergency Operator

Gas Detection Operator

The Gas Detection Operator (GDO) deactivates all utilities operated by the Lab Control Panel when a gas leak is detected.

Page 5 rev version A - less red

1

VP

Valve Panel

The Valve Panel (VP) is a pre-assembled panel containing the domestic water and fuel gas solenoid valves specified to regulate the use of domestic water or fuel gas within a lab environment. This panel works in conjunction with the Lab Automation Control Systems lab control panel. All ASCO™ solenoid valves are normally closed until the instructor activates the necessary service from the lab control panel. Valve Panels are white powder coated as a standard feature or brushed stainless steel finish as an option All ASCO™ 120VAC solenoid valves are available in 1/2” through 3” diameters. Gas ball valves and ASCO™ gas solenoid valves are UL rated for gas service. Valve panels are assembled and tested for use with the Lab Automation Control Systems’ lab control panel.

to o Ph e w om e N oC T

Standard Features

Optional Items

• Semi- Recessed, or Surface Mount NEMA 1 panel with white powder coat finish • Piano hinged panel door with screwdriver sloned latch • Brass water connections • Black iron gas connections • Gas solenoid valves are UL rated for gas service • Gas ball valves are UL rated for gas service • Solenoid valves available in 1/2” through 3” diameter • 120VAC solenoid valves • 6 Available Sizes • Pre-Punched hole with Grommets provided for each utility service • Top, bottom, or side inlet orientation • Assembled and pre-tested for use with Lab Automation Control Systems’ lab control panel • Single Connection Point • Two year limited parts warranty (with factory start-up).

• • • •

(KL) keyed panel door latch (S) wye strainers for water service (A) shock arrestor for water service (SS) Stainless Steel Finish

ASCO™ Solenoid Valves are UL and CSA Certified.

All Lab Automation Control System products are factory assembled and certified to UL 5O8A standards.

17

Page 5 rev version A - less red

1

Lab Automation Control Systems - Valve Panels - VP Panel Selection & Model Number

Sample Selection & Model Number:

VP-__-__-__-__-__-__-____-____-____-____

VP-3-G-HW-CW-1-.75-.75-T-S

VaIve Panel

• Lab Solenoid Control Panel

Valve panel with three solenoids providing service for 3 utilities 1” gas, 3/4” hot water and 3/4” cold water), white powder coated panel standard white powder coat finish, inlets on panel top, and strainer.

Number of Solenoids • (1) One Solenoid • (2) Two Solenoids • (3) Three Solenoids

Service Required • (G) Gas • (HW) Hot Water • (CW) Cold Water

Solenoid Sizes

• .5”, .75”, 1”, 1.25”, 1.5”, 2”, 2.5”, 3”

Inlet Orientation • (B) Bottom inlet • (T) Top Inlet • (S) Side Inlett

Panel Options • • • • •

(KL) Keyed Panel Door latch (S) Wye Strainers for Water Service (A) Shock Arrestor for Water Service (FM) Flush Mount (Special Construction Required) (SS) Stainless Steel Finish

All Lab Automation Control System products are factory assembled and certified to UL 5O8A standards.

18

Page 5 rev version A - less red

1

LAB AUTOMATION CONTROL SYSTEMS - VALVE PANEL SUBMITTAL 1/2" - 1" WITHOUT STRAINERS PROJECT NAME_________________________________________________________ LOCATION_____________________________________________________________ CONTRACTOR__________________________________________________________ DATE_______________________ MODEL # VP-___-__-__-__-__

16

GAS INLET

HOT WATER INLET

COLD WATER INLET

6

TBS

20

Standard Features Semi- Recessed, or Surface Mount NEMA 1 panel with white powder coat finish Piano hinged panel door with keyed latch Brass water connections, Black iron gas Gas solenoid valves and ball valves are UL rated for gas service Valves available in ½" through 2" diameter 120VAC 4 Available Enclosure Sizes based on valve size and options Pre-Punched hole with Grommets provided for each utility service Top, bottom, right or left inlet orientation Assembled and pre-ested for use with Lab Automation Control Systems' lab control panel Single Connection Point For Electrical Service Two year limited parts warranty (with factory start-up) ASCO™ Solenoid Valves are UL and CSA Certified.

Options (-S) Wye Strainers for Water Service (-A) Shock Arrestor for Water Service (-SS) Stainless Steel Finish (-FM) Flush Mount (Special Contruction Required

PLEASE ADD THE THE NUMBER NUMBEROF OF VALVES VALVES REQUIRED REQUIREDAFTER AFTERVP VP(1,2,3,4) (1,2,3,4) PLEASE ADD PLEASE ADD TYPE TYPEOF OFSERVICE SERVICEAFTER AFTERTHE THENUMBER NUMBEROF OFVALVES VALVES(CW,HW,G) (G,HW,CW) PLEASE ADD PLEASE ADD VALVE VALVE SIZES SIZESBASED BASEDON ON1ST 1STPOSITION POSITION CW, G, 2ND POSITION HW, AND 3RD3RD POSITION CW G) PLEASE ADD 2ND POSITION HW, AND POSITION VALVE 1”,(B) 1.25”, 1.5”, 2”,- 2.5”, 3” PLEASE ADD INLET VALVE SIZE SIZE INDICATED INDICATED AS AS FOLLOWS FOLLOWS .5”, (A) .75”, - 1/2", - 3/4", (C) 1", (D) - 1 1/4", (E) - 1 1/2", (F)LOCATION - 2" (T)TOP,ADD (B) - BOTTOM PLEASE INLET LOCATION (T)- TOP, (B) - BOTTOM (L) - LEFT SIDE (R) - RIGHT SIDE

SUBMITTAL

---------------

NTS

19

Page 5 rev version A - less red

1

LAB AUTOMATION CONTROL SYSTEMS - VALVE PANEL SUBMITTAL 1/2" - 1" WITH STRAINERS PROJECT NAME_________________________________________________________ LOCATION_____________________________________________________________ CONTRACTOR__________________________________________________________ DATE_______________________ MODEL # VP-___-__-__-__-__ GAS INLET

HOT WATER INLET

COLD WATER INLET

6

20

TBS

24

Standard Features Semi- Recessed, or Surface Mount NEMA 1 panel with white powder coat finish Piano hinged panel door with keyed latch Brass water connections, Black iron gas Gas solenoid valves and ball valves are UL rated for gas service Valves available in ½" through 2" diameter 120VAC 6 Available Enclosure Sizes based on valve size and options Pre-Punched hole with Grommets provided for each utility service Top, bottom, right or left inlet orientation Assembled and pre-ested for use with Lab Automation Control Systems' lab control panel Single Connection Point For Electrical Service Two year limited parts warranty (with factory start-up) ASCO™ Solenoid Valves are UL and CSA Certified.

Options (-S) Wye Strainers for Water Service (-A) Shock Arrestor for Water Service (-SS) Stainless Steel Finish (-FM) Flush Mount (Special Contruction Required)

PLEASE ADD THE NUMBER OF VALVES REQUIRED PLEASE ADD THE NUMBER OF VALVES REQUIRED AFTER VPAFTER (1,2,3,4) VP (1,2,3,4) PLEASE ADD TYPE OF SERVICE AFTERAFTER THE NUMBER OF VALVES (CW,HW,G) PLEASE ADD TYPE OF SERVICE THE NUMBER OF VALVES (G,HW,CW) PLEASE ADD VALVE SIZES BASED ON 1STON POSITION CW, 2ND G, POSITION HW, ANDHW, 3RD AND POSITION PLEASE ADD VALVE SIZES BASED 1ST POSITION 2ND POSITION 3RDG) POSITION CW VALVE INDICATED AS FOLLOWS (A) - 1/2", - 3/4", - 1",1.5”, (D) -2”, 1 1/4", 1 1/2", (F) -ADD 2" VALVESIZE SIZE INDICATED AS FOLLOWS .5”,(B) .75”, 1”, (C) 1.25”, 2.5”,(E) 3”- PLEASE INLET LOCATION PLEASE ADD LOCATION (T)- TOP, (B) - BOTTOM (L) - LEFT SIDE (R) - RIGHT SIDE (T)- TOP, (B)INLET - BOTTOM

SUBMITTAL

20

----------

NTS

Page 5 rev version A - less red

1

ECP

Electric Contactor Panel

The Electric Contactor Panel (ECP) is a UL assembled panel containing 4 pole contactors as required for each electrical service controlled within the lab area. All panels are standard with a surface mount NEMA 1 enclosure, grey powder coal finish with a screwdriver latch Available electric service up to 40 10 (4) pole contactors) Panels also include prenotched panel for ease of installation requiring no drilling for wire service connections.

Standard Features

Optional Items

• Surface mount NEMA 1 panel with grey powder coat finish and piano hinge door • Screwdriver slotted latch • Up to (10), 4 pole contactors (4 to 40 services) • Electrically held contactors • Pre-punched holes for wire connection • Assembled and tested for use with Lab Automation Control Systems’ lab control panel • UL 508A certified • Full set of assembly drawings and electric schematics • Two year limited parts warranty (with factory start-up)

• • • •

(FC) Fan Connection (FMWPC) Flush Mount White Powder Coat (MLNO) Mechanically Latched Normally Open (MLNC) Mechanically Latched Normaly Closed

All Lab Automation Control System products are factory assembled and certified to UL 5O8A standards.

21

Page 5 rev version A - less red

1

Lab Automation Control Systems Electric Contactor Panel - ECP Panel Selection & Model Number

Sample Selection & Model Number:

ECP-__-__-__-__-__-__-____-____-____-____

ECP-24

Electric Contactor Panel

Electric Contactor Panel with 24 electric services, grey powder coal with standard screwdriver slotted latch.

• Electric Panel

Number of Electric Services

• Multiples of 4 (40 max) • (4), (-8), (-12), (-16), (-20), (-24), (-28), (-32), (-36), (-40)

Panel Options

• • • •

(FC) Fan Connection (FMWPC) Flush Mount White Powder Coat (MLNO) Mechanically Latched Normally Open (MLNC) Mechanically Latched Normally Closed

All Lab Automation Control System products are factory assembled and certified to UL 5O8A standards.

22

Page 5 rev version A - less red

1

LAB AUTOMATION CONTROL SYSTEMS - ELECTRIC CONTACTOR PANEL SUBMITTAL PROJECT NAME_________________________________________________________ LOCATION_____________________________________________________________ CONTRACTOR__________________________________________________________ DATE_______________________ MODEL # ECP-___-__-__-__-__-___-___-___

15

END

END

END

EC1

EC2

EC3

15

END

WIRE WAY 1"X2"

END

EC4

END

WIRE WAY 1"X2"

1.2

Standard Features

Surface mount NEMA 1 panel with grey powder coat finish and piano hinged door 15"x4" Up to 20 Circuits Screwdriver slotted latch door Up to (10), 4 pole contactors (4 to 40 services) Electrically held contactors Pre-punched holes for wire connections for worry free installation Assembled and tested for use with Lab Automation Control Systems' lab control panel UL 508A certified Full set of assembly drawings and electric schematics Two year limited parts warranty (with factory start-up).

Options (-FC) Fan Connection (-FMWPC) Flush Mount White Powder Coat

FOR MODEL SELECTION PLEASE ADD THE FOLLOWING AFTER ECP #OF CIRCUITS (4 - 40) AFTER NUMBER OF CIRCUITSPLEASE ADD LOCATION OF PRE-PUNCHED HOLES FOR (TB-(TOP/BOTTOM)TL(TOP/LEFT) TR-(TOP/RIGHT) BL-(BOTTOM/LEFT) BR-BOTTOM/RIGHT)

SUBMITTAL

---------------

NTS

23

Page 5 rev version A - less red

1

IDCP

Instructor Demo Control Panel

The Instructor Demo Control Panel (IDCP) is a UL assembled control panel for utility service to a prep station or instructor’s demo table. This panel provides control of all utilities as specified in these areas Normally the solenoid valves in these area types are free standing and separate from the main classroom A selector switch either keyed or non-keyed allows the instructor to separately control this area. This panel can be used as a stand alone system or can be connected to the Lab Automation Control Systems’ Lab Control Panel. This panel is assembled and tested to meet UL 508A certifications.

Standard Features

Optional Items

• NEMA 1 Flush Mounted panel with white powder coat finish • Keyed Latch and piano hinged door • Two position selector switch (enable/disable) • Emergency stop push/pull operator • UL 508A certified • Assembled and tested • Two year limited parts warranty (with factory start-up).

• (IPB) Illuminated Push Buttons for each utility specified for control • (SSL) Service indicator Light for all utilities • (SA) Stand Alone unit not connected to main lab control panel

All Lab Automation Control System products are factory assembled and certified to UL 5O8A standards.

24

Page 5 rev version A - less red

1

Lab Automation Control Systems Instructor’s Demo Control Panel - IDCP Panel Selection & Model Number

Sample Selection & Model Number:

IDCPPI-__-__-__-__-__-__-____-____-____-____

IDCP--3-G-HW-G-E-IPB-SA

Instructor Demo Control Panel Number of Utilities

Instructor’s Demo Control Panel controlling 3 utilities which are gas, hot water, and electricity with each utility having an illuminated push button for both on/ off, and is a stand alone unit.

• (-1 thru-4)

Utilities Controlled • • • •

(G) Gas (HW) Hot Water (CW) Cold Water (E) Electricity

Panel Options

• (IPB) Illuminated Push Buttons For Each Utility • (SSL) Single Service Indicator Light (On) For All Utilities • (SA) Stand Alone unit not connected to main lab control panel

All Lab Automation Control System products are factory assembled and certified to UL 5O8A standards.

25

Page 5 rev version A - less red

1

LAB AUTOMATION CONTROL SYSTEMS - INSTRUCTOR DEMO CONTROL PANEL

PROJECT NAME_________________________________________________________ LOCATION_____________________________________________________________ CONTRACTOR__________________________________________________________ DATE_______________________ MODEL #IDCP-___-__-__-__-__-__-__

12

4

EMERGENCY STOP

14

12 UTILITIES OFF ON

UTILITIES OFF

UTILITIES ON

14 StandardFeatures NEMA1FlushMountedpanelwithwhitepowdercoatfinish Keyed Latchandpianohingeddoor Twopositionselectorswitch(enable/disable) Singleilluminatedpushbuttonforallutilities Emergencystoppush/pull operator UL508Acertified Assembledandtested Twoyearlimitedpartswarranty(withfactorystart-up).

Panel Options (-IPB)IlluminatedPushButtonsForEachUtility (-SSL)SingleService IndicatorLight(On)ForEachUtility (-SA)StandAloneunitnotconnectedtomainlabcontrolpaenl

FOR MODEL SELECTION PLEASE ADD THE FOLLOWING AFTER IDCP #OF UTILITIES (1,2,3,4) AFTER NUMBER OF UTILITIES PLEASE ADD TYPE OF UTILITY (CW-HW-G-E)

SUBMITTAL

26

----------

NTS

Page 5 rev version A - less red

1

REO

Remote Emergency Operator

The Remote Emergency Operator (REO) is a UL assembled product containing an emergency stop, push/pull operator which operates in conjunction with the Lab Automation Control Systems’ lab control panels to provide shutdown in an emergency/panic situation to all utilities and to activate high speed to the lab purge fan. Remote Emergency Operators are typically flush mount and available NEMA 4 brushed stainless steel finish. These operators are available with a clear cover, a single speed fan switch for remote fan operation, a keyed switch for reset and a service on indicator light. When specifying any REO with additional options, please note the operator size, and orientation will change to account for the additional services.

Standard Features

Optional Items

• Flush mount SS face plate, NEMA 1 grey powder coat or NEMA 4 brushed stainless steel • Emergency stop - push/pull operator • Fully assembled and pre-tested for use with Lab Safety • Systcm™ utility control panel • UL 508A certified • Two year limited parts warranty (with factory start-up)

• • • •

(CC) clear cover (F) fan enable/disable switch (KS) keyed switch for panel reset (SO) service on indicator light

All Lab Automation Control System products are factory assembled and certified to UL 5O8A standards.

27

Page 5 rev version A - less red

1

Lab Automation Control Systems Remote Emergency Operator - REO Panel Selection & Model Number

Sample Selection & Model Number:

REO-__-__-__-__-__-__-____-____-____-____

REO-PC-CC-SO

Remote Emergency Operator Panel Finish

• (PC) Grey Powder Coat Finish (NEMA 1)

Remote emergency operator, surface mounted*, with grey powder coat finish, clear cover and service on indicator light. (*Due to addition of Service On Indicator light, Panel finish and dimensions have changed).

Panel Options • • • •

(CC) Clear Cover (F) Fan Enable/Disable Switch (KS) Keyed Switch for Panel Reset (S0) Service On Indicator light

All Lab Automation Control System products are factory assembled and certified to UL 5O8A standards.

28

Page 5 rev version A - less red

1

LAB AUTOMATION CONTROL SYSTEMS - REMOTE EMERGENCY OPERATOR SUBMITTAL PROJECT NAME_________________________________________________________ LOCATION_____________________________________________________________ CONTRACTOR__________________________________________________________ DATE_______________________ MODEL # REO-___-__-__-__-__

SINGLE OPERATIONAL UNIT SHOWN

2.5 EMERGENCY LAB UTILITIES OFF

4.5

Standard Features Flush mount panel: NEMA 4 brushed stainless steel Emergency stop, push/pull operator Fully assembled and pre-tested for use with Lab Automation Control Systems lab control panels UL 508A certified Two year limited parts warranty (with factory start-up)

Options (-CC) Clear Cover (-F) Fan Enable/Disable Switch (-KS) Keyed Switch for Panel Reset (-SO) Service On Indicator Light (-PC) Grey Powder Coat NEMA 1

REO-F-KS-PC REO-KS-SO-PC

SUBMITTAL

-----------

NTS

29

Page 5 rev version A - less red

1

Lab Automation Control Systems Remote Light Alarm Beacon - RLAB The Lab Automation Control Systems Remote Light Alarm Beacon (RLAB) is a UL assembled light tree which operates in conjunction with the Lab Automation Control Systems’ lab control panel The RLAB is a remote and visual display of an alarm condition upon emergency shutdown of the lab control panel. In the event of an emergency, a color specific LED will pulse on the surface or lower mounted light. If so equipped, an audible alarm will sound upon an emergency shutdown of the utility circuits. Remote light arrays should be mounted at elevations which do not interfere with room occupants. The RLAB is typically mounted above the door of the classroom area.

Standard Features

Optional Items

• • • • • • •

• (A) 83 dB audible alarm • [2,3,4) Number of Lights • (T) Tower

Surface/wall mounted Junction box and cover plate for wall or ceiling mounting Constant LED displays Single Light Assembled and tested for use with Lab Automation Control Systems’ lab control panel Two year limited parts warranty (with factory start-up)

All Lab Automation Control System products are factory assembled and certified to UL 5O8A standards.

30

Page 5 rev version A - less red

1

Lab Automation Control Systems Remote Light Alarm Beacon - RLAB Panel Selection & Model Number

Sample Selection & Model Number:

RLAB-__-__-__-__-__-__-____-____-____-____

RLAB-2-G-E-F-T

Remote Light Alarm Beacon

Remote Light Alarm Beacon with 2 lights for gas and electricity. Lights are flashing and mounted on a light tower.

Number of lights • • • •

(1) (2) (3) (4)

One Two Three Four)

Light Color

• • • •

(E) Electric Service Active (Blue) (G) Gas Service Active (Amber) (W) Domestic Water Service Active (Green) (P) System Panic State Alarm (Red)

Light Display • (C) Constant • (F) Flashing

Panel Options

• (A) 83 dB Audible Alarm • (T) Tower Mounted • (W) Wall/Surface Mounted

All Lab Automation Control System products are factory assembled and certified to UL 5O8A standards.

31

Page 5 rev version A - less red

1

Lab Automation Control Systems - WARRANTY LACS will repair or replace any defective parts or workmanship of this product for a period of five years from date of installation, not to exceed the total sum of the amounts paid for the product by the purchaser. Damage caused by incorrect installation or improper usage, or failure to follow recommended installation, operation, and or maintenance procedures listed in the I/O manual may void product warranty.

Disclaimer of Implied Warranty:

There are no warranties that extend beyond the description listed above. Seller disclaims any implied warranty of merchantability of the goods or of the fitness of the goods for any purpose, and buyer agrees that the goods are sold “As Is”.

Limits of Liability:

LACS’ liability shall be limited to costs of repair or replacement parts. The Lab Control Panels and all companion products are not intended for usage other than those expressly described in the I/O manual. LACS shall not be held liable for damage or injury caused by the improper use of the product, and does not warrant against or assume liability for failure of operation or lack of notification to other integrated monitoring systems. Testing and adjustments should thoroughly be made at time of initial operation. Semi-annual testing should be conducted by the user to assure all components function and operate according to product specifications. lACS shall not be liable for damage or injury as a result of improper installation of all products associated with the complete system.

Warranty: Five year limited parts only warranty applies with factory start-up. One year limited parts only warranty applies with no factory start-up.

All Lab Automation Control System products are factory assembled and certified to UL 5O8A standards.

32

Page 5 rev version A - less red

1

Section 223000 - Plumbing Equipment Part 1 General 1.1 Section Includes A. Utility Controllers. 1.2 Related Requirements A. Section 262717- Equipment Wring: Electrical characteristics and wiring connections. 1.4 Submittals A. Refer to Section 013300 for Submittal Procedures. B. Product Data: 1. Provide electrical characteristics and connection requirements. C. Project Record Documents: Record actual locations of components and appurtenances. D. Operation and Maintenance Data: Include operation, maintenance, and inspection data. E. Warranty : Submit manufacturer warranty and ensure forms have been completed. 1.5 Quality Assurance A. Manufacturer Qualifications: Company specializing in manufacturing the type of products specified in this section, with minimum three years of documented experience. 1.6 Certifications A. NFPA 70, National Electrical Code B. NFPA 72, National Fire Alarm Code C. NFPA 9OA, Installation of Air Conditioning and Ventilation Systems. D. Americans with Disabilities Act E. Local and State Building Codes F. NFPA 54 Natural Gas Code. G. UL 508A H. All requirements of the local Authority Having Jurisdiction. 1.7 Delivery, Storage, And Handling A. Provide temporary inlet and outlet caps. Maintain caps in place until installation. 1.8 Warranty A. Provide five year limited parts manufacturer warranty.

33

Part 2 Products 2.1 Lab Control System A. Control Panel : LACS Model LCP 1. At each science room and elsewhere as shown on Drawings, provide a LACS Lab Control Panel. Panel shall be NEMA 1 flush mounted with concealed wall box provided. Utility Controller shall be shipped with a factory supplied construction cover. The Lab Control Panel shall allow for independent activation or emergency deactivation for classrooms as detailed on drawings. Panel shall also consist of illuminated push buttons, to allow individual control (on/off) for each utilitiy, 2 Position Keyed Selector Switch Enable/Off) 1 System Power Supply 120VAC 24VDC 5A with circuit protection, Power ON Selector, Switch located in an internal junction box with removable cover System Controller 24VDC. Discrete Inputs, Relay Outputs, Terminal Blocks with Ground TB. Locate as shown on Drawings. Lab Controller shall be UL 508A. Wiring to the input power terminals shall be by Division 26 Contractor per the drawings. 2. Panel shall have integral micro controller with Siemens logic device to provide 24VDC output circuits to activate utilities as shown on drawings. Activation of output circuits shall be enabled only byswitch ON and then pressing the individual utility to be activated. 3. The Panel shall be equipped with an illuminated push button for each output circuit and a primary enabling key switch. Deactivation of output circuits’ shall not require engagement of enabling key. Panel shall be provided with N/O panic button assembly to deactivate output circuits in case of emergency. Reset after panic shall occur by re-keying.

Page 5 rev version A - less red

1

Section 223000 - Plumbing Equipment 4. The Panel shall have provisions if required for purge/vent fan control. The purge/vent fan shall operate upon activation of the Remote Panic Operator or by manual operation from the instructor. Panel shall integrate with Building Management System and be connected to the fire alarm relay. All utilities shall deactivate upon fire alarm signal and require re-keying. B. Remote Operator/Instructor Station Emergency Stop Assembly: REO 1. Where shown on Drawings, provide a wall mounted Remote Operator Assembly. Assembly shall consist of a wall box, panel and push/pull, normally opened panic button. All utilities shall be disengaged immediately and turn the exhaust fan on once the Mushroom button is pressed. Connection by Division 26 Contractor. Locate as shown on Drawings. C. Solenoids: Model VP 1. Furnish and install a Valve Panel. The panel shall be NEMA 1 painted white and shall be semi recessed with a wall box provided, normally closed general service, zero differential solenoids at each hot and cold domestic water utility service, refer to drawings for line sizes. The solenoid shall be an ASCO Series 120VAC General Service duty valve. Provide a ball valve up-stream from the ASCO solenoid on all fluid deliver systems. Thoroughly flush piping system prior to placing into service. Solenoid Valves for Gas shall be UL rated. Final connection to Control Panel by Division 26 contractor wiring to be 18AWG MTW or equal unless otherwise noted. Solenoids shall close upon loss of operating power and require re-keying for reactivation of service. D. Electric Contactor Panel- ECP 1. Furnish and install LACS Electric Contactor Panel. The panel shall be NEMA 1 painted gray and shall be flush mounted with a concealed wall box provided. Panel shall have (5) - 4 Pole Electric Contactors with Branch Circuit Protection electrically held. Connections by Division 26 Contractor. Number of outlets as detailed on drawings.

(Continued)

E. Manufacturers: 1. Product shall be LACS (Lab Control Automation Systems) an OK RPM Product by E&I, or approved equal. F. Manufacturer Requirements: 1. Manufacturer shall provide I/O manual along with a complete set of details including plumbing and electrical schematics as required for each panel. Each Panel shall also be provided with a bill of materials including manufacturer and part numbers. All wire is #18AWG MTW or equal unless otherwise noted. Coordination between trades is required for installation. All electrical connections by Division 26 Contractor. A factory authorized start-up will be included for each panel to include faculty and maintenance training. Each panel will be supplied with (2) sets of keys. Prior to construction of Lab Control Panel an Engineered approved submittal must be provided.

Part 3 Execution 3.1 Installation A. Install plumbing equipment in accordance with manufacturer’s instructions, as required by code, and complying with conditions of certification, if any. B. Coordinate with plumbing piping and related electrical work to achieve operating system. 3.2 Factory Authorized System Test And Start -Up A. Prior to placing the Lab Control System into service, perform ALL Start-up procedures and Checklists as stated in Manufacturer’s Operations and Maintenance Procedure literature. B. Verify that all components and control devices comply with manufacturer’s requirements and recommendations, and that all devices and installations conform to Drawings and Specification requirements. 1. Verify that all controlled piping systems have been thoroughly cleaned. 2. Verify that all controlled devices and circuits are ON.

34

Page 5 rev version A - less red

1

Section 223000 - Plumbing Equipment 3. Verify that connections to all integrated systems are complete. 4. Verify that all monitoring systems respond to Panic. 5. Verify that remote panic assemblies activate the Panic State. 6. Verify that service to emergency showers and eyewashes are not affected by operation of system, if applicable.

(Continued)

C. Upon completion of ALL Start-up tests, place the system into service. Complete all warranty registration documents. Submit originals with other project related closeout and 0 & M documentation. Review all operating procedures with a representative of the Owner. Provide all System keys to the Owner’s representative.

Operation Procedures Overview: The system is designed for immediate shutdown of all controlled utilities (water, gas, electric) in the facility when an input is received at the Lab Control Panel. Inputs that will shut down the utilities consist of the following: 1. Keyed Switch at the main Lab Control Panel 2. Individual selector switches at the main Lab Control Panel 3. Main Emergency stop operator is engaged at the Lab Control Panel 4. Any Remote Operator is engaged 5. A remote Fire Alarm signal is received from a central fire alarm system (if installed). 6. Any alternate shutdown signal is received, such as an Intruder Alert, if provided. 7. A BMS signal is received (if installed) The system will remain in a shutdown state until the following set of conditions is met: 1. All alarm conditions are remedied and inactive. 2. All control selector switches are in the OFF state. 3. All Emergency Stops are in the pulled out, or inactive state. 4. The Classroom Service Switch(s) are in the OFF state.

35

The same set of conditions must be met to activate the controller at the initial power up sequence. The system may be brought to the active state by turning on the Classroom Service switch then turning on each of the required Operators. The utilities will remain active until either the Lab Control Panel is switched to the inactive state, as is the case for individual utility control, or another alarm is received as outlined above.

Page 5 rev version A - less red

1

Maintenance Instructions Preventive Maintenance • Keep the medium flowing through the valve as free from dirt and foreign material as possible. • Periodic exercise of the valve should be considered if ambient or fluid conditions are such that corrosion, elastomer degradation, fluid contamination build up, or other conditions that could impede solenoid valve shifting are possible. The actual frequency of exercise necessary will depend on specific operating conditions. A successful operating history is the best indication of a proper interval between exercise cycles. • Depending on the medium and service conditions, periodic inspection of internal valve parts for damage or excessive wear is recommended. Thoroughly clean all parts. If parts are worn or damaged, install a complete rebuild kit.

Causes of Improper Operation • Incorrect Pressure: Check valve pressure. Pressure to valve must be within range specified on nameplate. • Excessive Leakage: Disassemble valve and clean all parts. If parts are worn or damaged, install a complete ASCO™ Rebuild Kit. ORDERING INFORMATION FOR ASCO™ REBUILD KITS When Ordering Rebuild Kits for ASCO™ valves, order the Rebuild Kit number stamped on the valve nameplate.

Lab Automation Control Systems Tulsa, Oklahoma Classroom Lab Control Panel Sample I/O General Product Information The Lab Control Panel is a safety device that grants local, absolute authority to the instructor to determine those utilities that are to be used during the class-day experiments while restricting unauthorized student use laboratory devices. The device regulates the control of various utility services such as domestic water, natural gas and electrical outlets within a science classroom. A keyed switch or code enter to the touch panel provides for security against unauthorized use of the system. Additional provisions are provided to automatically cut off services in the case of a general fire or intruder alert. Construction All electrical components a pre-assembled, wired and tested within the proper enclosures. The electronic controller is housed within the Lab Control Panel enclosure. The Lab Control Panel is housed in a powder-coated; NEMA 1 rated enclosure constructed of 14-gauge sheet metal.

36

Caution: Do not drop this assembly or expose it to environmental conditions outside of the NEMA 1 rating. Assembly and Compliance All Controllers are assembled to specific control needs as required by the customer to permit limited field configurations of the operating system. A configuration page is included within this manual. Options or field add-ons are assembled and shipped with specific instructions on their use. Refer to the Equipment Specifications to verify all components wired to this system. Locating and Positioning the Controller Prior to installation, verify ADA (Americans with Disabilities Act) dimensions and compliance requirements. For best results: Install the Controller in a room where the utility services are controlled, at or near an exit and accessible to occupants of the room. Mount the vertical center of the service switched or a touch panel on the Door Panel to the ADA-required maximum height.

Page 5 rev version A - less red

1

Lab Automation Control Systems

(Continued)

TBIP Detailed Description

Electric Contactor Panel Layout

TBIP- H: Utility power 120VAC line connection. Ensure the hot side of the power service is terminated on this contact. TBIP-N: Utility power Neutral connection. Ensure the neutral side of the power service is terminated on this contact. TBIP- Ground: The Green/Yellow ground from the utility power. Ensure that only the utility ground is terminated.

TBP Detailed Description X1: Connect power HOT 120V AC from 20A circuit breaker. X2: Connect power HOT 120V AC from 20A circuit breaker. X3: Connect power HOT 120V AC from 20A circuit breaker. N1: Connect power Neutral 120V AC from Neutral service. N2: Connect power Neutral 120V AC from Neutral service. N3: Connect power Neutral 120V AC from Neutral service.

TB2 Detailed Description 1/N: 2/N: 4/N:

Connect hot water solenoid. Connect cold water solenoid. Connect exhaust fan. 5/6: Connect classroom remote emergency operator 1, jumper installed as shipped, remove the jumper to hook up the E- STOP. 7/8: Connect normally open dry contact for Intruder alarm. 9/10: Connect normally open dry contact for remote fire alarm. 11/12: Connect normally open dry contact for Building Management System (BMS). 13/14: Spare 15/16: Connect the electrical panel. 17/18: Dry contact for general alarm.

TB1 Detailed Description 1/2: connect electrical service from the LCP panel. TB2 Detailed Description 1/13: 2/14: 3/15: 4/16: 5/17: 6/18: 7/19: 8/20:

Connect Connect Connect Connect Connect Connect Connect Connect

to to to to to to to to

power power power power power power power power

receptacle receptacle receptacle receptacle receptacle receptacle receptacle receptacle

1 2 3 4 5 6 7 8

37

Page 5 rev version A - less red

1

Start Up Procedure 1) Check that CB1 and CB2 are in the OFF position. 2) Check that ALL OPERATORS are in the OFF or INACTIVE STATE. All Emergency Stops should be pulled out or INACTIVE. All Cold Water Valve switches should be in the OFF position. All Classroom Service switches should be in the OFF position. 3) Engage the breaker in the main distribution panel (not part of this assembly) and using a Volt Meter, check for 120VAC on TBIP-H band N. 4) Engage CB1 circuit breaker. This will apply power (120 VAC) to the panel.

5) Engage CB2 circuit breaker. This will apply power 120 VAC to the Siemens™ Logo CLASS 1. This unit should power up and green lights on the unit will be illuminated. 6) If there is an alarm in this stage check your field connects, there should be no alarms present. Note: testing this alarm may involve getting permission from the school authorities. System is now ready to proceed to the Operational Procedures. System integrators should fully exercise this procedure before turning the system over for active use.

Installation Guidelines The Classroom Lab Control Panel is housed in a NEMA 1 flush mounted, 15”X 12” X 4” enclosure. The installation area should conform to all NEMA 1 class restrictions for such use. It should be free from standing, running or condensing water environments. Care should be taken to ensure that metal chips and other foreign debris do not enter any other electronic components. Initial Checkout Procedure All wiring should be checked for accuracy before applying power. Double check the termination to the terminal strips to ensure that each wire is in its correct position. All checks outlined below are performed with power off. This means that the incoming 120VAC line power should be Off. 1) Emergency Stop Check - There are several Remote Emergency Operator inputs. The circuit requires a normally closed contact when the operator(s) are in the inactive, or pulled out state. Multiple remotes may he installed. Wire each remote in series such that two wires end up terminated back at the Controller. Using an Ohm Meter, check for zero ohms (or near to) when all operators are in the normal state. Engaging any remote stop should produce an open circuit. Check each remote stop to ensure they are included in the series wiring run.

38

2) Remote Fire Alarm Input - The circuit requires a normally open dry contact from the alarm system source. The Fire Alarm input is located on TB2, 9 and 10. Using an Ohm Meter, check for an open circuit when the alarm is not in the alarm state. If possible, invoke a test alarm and check that the meter reads zero ohms or near to it. 3) Building Management system (BMS) - The circuit requires a normally open dry contact from the BMS source. The BMS input is located on TB2, 11 and 12. Using an Ohm Meter, check for an open circuit when the BMS is inactive. If possible, invoke a test alarm and check that the meter reads zero ohms or near to it. 4) lntruder Alarm Input - The circuit requires a normally open dry contact from the alarm system source. The intruder alarm input is located on TB2, 7 and 8. Using an Ohm Meter, check for an open circuit when the alarm is inactive. If possible, invoke a test alarm and check that the meter reads zero ohms or near to it.

Page 5 rev version A - less red

1

Overview Operational Procedures The system is designed to produce an automatic shutdown of all utility outputs when an alarm condition is received. The alarm conditions consist of the following: 1) Main Emergency operator is engaged on the Main Controller Panel. 2) Building management system alarm is received. 3) A remote Fire Alarm signal is received from a central fire alarm system. 4) Intruder Alert is received. When any of these signals are active, the system will shut down the utility output control relays. It will remain in a shutdown state until the following set of conditions is met. The same set of conditions must be met to bring the controller active from an initial power up sequence:

After each alarm is received. The system must be reset. The exception is the building management system. BMS will turn all systems off when activated. Systems will turn back ON when BMS cleared. To reset the system insert the reset key in “Enable Disable” keyed switch and turn it to disable mode, Turn Electrical switch, HOT water switch, cold water switch and service switch to OFF position. To turn the system ON, make sure all alarms and the Emergency stop buttons in inactive state. Turn the key switch to enable mode, turn the service switch to ON position. The system now is ready. By pressing any utility button ON the illuminated buttons will indicate which utility is active.

1) All alarming conditions are remedied and inactive. 2) All Emergency Stops are in the pulled out, or inactive state.

39

Page 5 rev version A - less red

1

E & I Sales LACS an OK RPM Product’s manufacturing partner, E & I Sales, have design engineers with over 45 years combined experience designing a wide variety of power distribution and process control panels to meet all types of applications These systems include medium and low voltage control solutions. VFD’s, power distribution, integrated PLC process controls for the oil and gas industry, custom pump solutions, gas compression systems, tank level monitoring, batch oven systems, refrigeration systems, conveyor systems, vacuum systems, and utility controllers for science classrooms as well as many others. E & I Sales believes in the products that they sell and the importance of quick reliable service that only a company with their level of expertise can provide. They are a valuable asset for LACS because of their ability to provide an immediate response to a request for customer service, top of the line technical support and field engineering support.

40

LACS An OK RPM Product, By E&I Tulsa, OK 74146 www.okrpm.com