KYOCERA Devices and CITRIX XenApp ‘CITRIX ready’ status information
Version 1.3 th April 30 , 2014 CSSD BOG/mbr
KYOCERA Document Solutions Europe B....
During the past two years, numerous KYOCERA printers and multifunction devices have been verified for Citrix compatibility by passing an extensive set of tests in combination with their dedicated Windows printer driver (i.e. installation, functional tests, stability and performance). A list of verified models is available under this link: http://www.citrix.com/ready/en (=> search for ‘Kyocera’) During the tests only the drivers are being verified for Citrix compatibility, the hardware has a negligible influence on the results. Since KYOCERA printer drivers typically share the same driver core for multiple hardware models, all printers and multifunction devices supported by a certain driver version can therefore be considered CITRIX ready. The KX Driver for Universal Printing has repeatedly passed all tests and holds the Citrix ready rating for XenApp 6.0 and 6.5 (64-bit). The approved KX driver version is 6.1, being the successor of the versions 6.0 and 5.3 that have already been verified as XenApp 6.5, 6.0 and 5.0 compatible. KX driver version 6.1 is the latest driver core, supporting more than 160 devices. At installation time you can either select the installation type Universal Printing component or specific Kyocera model, depending on your needs.
To limit the testing effort to a reasonable amount, the Universal Printing component has been officially verified for Citrix compatibility, representing all included devices. Both installation types will provide you with an equal level of Citrix compatibility due to the identical driver core and installer.
Selecting KX Driver for Universal Printing will you guide through the installation in just a few steps.
Kyocera KM-C4008 Kyocera KM-C4035E Kyocera Mita CS-1650 Kyocera Mita CS-1815 Kyocera Mita CS-2050 Kyocera Mita CS-2550 Kyocera Mita FS-1010 Kyocera Mita FS-1018MFP Kyocera Mita FS-1020D Kyocera Mita FS-1050 Kyocera Mita FS-1800 Kyocera Mita FS-1800+ Kyocera Mita FS-1900 Kyocera Mita FS-1920 Kyocera Mita FS-3800 Kyocera Mita FS-3800KPDL3 Kyocera Mita FS-3820N Kyocera Mita FS-3830N Kyocera Mita FS-6020
*Official release version of KX 6.1 available on the Kyocera support web pages
If you prefer to install a driver for an individual model, please select the installation type ‘KX DRIVER’.
Select the desired printing system from the list and continue the installation with ‘Next’, the installation wizard will guide you through the remaining installation steps.
This document will be extended in version 1.4 with Citrix compatibility information on the Kyocera Classic Universal Driver PCL 6.