kilform 256/09/13
KPC
| UK
Killeshal Precast
building into the future since 1969
TACTILE FLAGS • • • •
Blister Cycleway Directional/Guidance Hazard Warning/Cordoroy
• • • •
Platform Edge Lozenge Pedestrian Crossing Pelistuds Tactile Studs
GRASS BLOCKS • Standard Precast Profiles
PAVING FLAGS • • • •
Hydraulically Pressed Natural Stone Natural Aggregate Coloured
PAVING BRICKS • Cobble Stone • Rectangular
Specials made to order
flags range Visit our website: www.killeshalprecast.co.uk
KPC - Killeshal Precast
Tel: 0800 0393367 Email:
[email protected]
RED LIGHT-CONTROLLED CROSSING POINT
BUFF UNCONTROLLED CROSSING POINT
NATURAL CERTAIN TYPES OF CONSERVATION AREAS
Designed to assist visual impaired pedestrians through crossing points
BLISTER (BS EN 1339: 2003) APPLICATION • identify the location of a drop kerb and a safe place to cross • installation: to span the full width of the crossing from left to right drop kerb
• 400 x 400 x 50mm*
• 400 x 400 x 50mm*
CYCLEWAY (BS EN 1339: 2003) APPLICATION • to indicate the beginning or the end of shared pedestrian/cycle routes not separated by different levels • a central delineation strip running the length of the share route provides a false kerb for the visually impaired pedestrian • installation: laid transverse to denote the pedestrian path, longitudinal to direction of the travel
• 400 x 400 x 50mm*
• 400 x 400 x 50mm*
DIRECTIONAL / GUIDANCE (BS EN 1339: 2003)
TACTILE FLAGS
APPLICATION • used to guide pedestrians through large, open paved areas avoiding hazards and obstructions, i.e. plazas, squares • installation: round ended bars are laid in the direction of travel, turned at the corners to give a warning in the change in direction, installed in a single trip • 400 x 400 x 50mm*
• 400 x 400 x 50mm*
• 400 x 400 x 50mm*
HAZARD WARNING / CORDUROY (BS EN 1339: 2003) APPLICATION • warns of a hazard and to proceed with caution • for use at: top and bottom of stair flights, level crossing, intersections of shared cycle/pedestrian routes • installation: at 90º and 400mm away from the hazard
• 400 x 400 x 50mm*
• 400 x 400 x 50mm*
PLATFORM EDGE (BS EN 1339: 2003) APPLICATION • to indicate the presence of a heavy rail system (either surface or underground rail systems) platform edge • off- street applications • installation: along the entire length of the platform, install parallel to the platform edge, position 600700mm away from the platform edge
• 400 x 400 x 50mm*
LOZENGE (BS EN 1339: 2003) APPLICATION • warns users of on-street platform edges of: Light Rapid Transport system, supertram schemes • installation: lay in a single 400mm wide strip, lozenges running parallel to the platform edged, position no closer than 500mm away from the platform edge
• 400 x 400 x 50mm*
• 400 x 400 x 50mm*
* Other sizes available The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are given as an indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
PAGE
2
Visit our website: www.killeshalprecast.co.uk
KPC - Killeshal Precast Tel: 0800 0393367 Email:
[email protected]
Killeshal’s Typical Tactile Flag Details
Other sizes available contact Killeshal’s customer service on 0800 0393367
PEDESTRIAN CROSSING PELISTUDS
TACTILE FLAGS
ALUMINIUM ROADSTUDS Each stud is cast aluminium alloy conforming to B.S. 1490 : 1988. Supplied with a raised profile to assist skid resistance and fishtails shank. Suitable for most road surfaces - a cheaper short term alternative to the stainless steel type when a compromise on quality is a necessity. STAINLESS STEEL ROADSTUDS Available with either a fishtail of chisel shank designed and shaped to prevent twisting after installation. To assist skid resistance a serrated face is also available (Chisel shank only). A superior quality roadstud appropriate for any type of road surface, its durability provides excellent cost effectiveness. • ALUMINIUM (100x100mm)
• PLAIN FACE STEEL (100x100mm)
Ref: M/121
• SERRATED STEEL (100x100mm)
Ref: M/119
Ref: M/120
TACTILE STUDS APPLICATIONS • pedestrian walkways • precincts • parks and recreation grounds • STEEL (100x100mm) Ref: M/124
PRECAST GRASS BLOCKS
GRASS BLOCK
KILLESHAL’S GRASS BLOCK PROVIDES • hard standing • erosion control • ground armouring • access paths and parking in environmentally sensitive areas. • 600 x 400 x 89 x 89mm Ref: M/113 The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are given as an indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
Technical Queries: 0800 0393367
PAGE
3
KPC - Killeshal Precast Tel: 0800 0393367 Email:
[email protected]
NATURAL STONE FLAGS AVAILABLE IN STOCK • STANDARD OPTIONS • STANDARD SIZESPAVING - 300 x 300mm - 600 x 600mm - 300 x 600mm - 900 x 600mm - 400 x 400mm - 450 x 400mm - 450 x 600mm G603
• STANDARD SIZESCOBBLES - 100 x 100 x 100mm - 100 x 200 x 100mm - 100 x 100 x 60mm - 100 x 200 x 60mm - 150 x 150 x 60mm
• SPECIAL ORDERS- 10 week delivery
PAVING FLAGS
G439
G558
G562
G606
G611
G612
G614
G617
G623
G633
G634
G635
G636
G640
G646
G648
G654
G654
G655
G657
G663
(Fine Grained)
(Course Grained)
Bollards and kerbs also available. Specials on request. G664
G682
G683
G684 (Fuding Black)
• STONE FINISHES
Flamed & Steelbrushed Material: G603
Bush Hammered Material: G603
Polished Material: G603
Honed Material: G603
Flamed Material: G603
Sandblasted Material: G603
Natural (Cleft) Material: G603
Chiselled Material: Bluestone
Pineapple (Rough Picked) Material: G603
Sunny (Sawn) Material: G623
Note colours and surface texture should be judged from actual samples rather than from those shown on brochure. The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are given as an indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
PAGE
4
Visit our website: www.killeshalprecast.co.uk
KPC - Killeshal Precast Tel: 0800 0393367 Email:
[email protected]
HYDRAULICALLY PRESSED FLAGS • REINFORCED FLAG WITH LIFTERS - 900 x 600 x 63mm - 600 x 600 x 63mm • BRICK PATTERN - 450 x 450 x 38mm • PLAIN FLAGS - 900 x 600 x 63mm - 900 x 600 x 50mm - 900 x 600 x 63mm - 600 x 600 x 50mm - 600 x 450 x 63mm - 600 x 450 x 50mm - 600 x 300 x 63mm - 600 x 300 x 50mm - 450 x 450 x 63mm - 450 x 450 x 50mm - 450 x 450 x 40mm
A/G NATURAL AGGREGATE FTLAGS Standard sizes: - 400 x 400 x 50mm
- 600 x 400 x 50mm
PAVING FLAGS
• FLORENTO GROUND
• RIMINI GROUND
• MILANO GROUND
• FLORENTO TEXTURED
• RIMINI TEXTURED
• MILANO TEXTURED
• POLLENSA GROUND
• SORRENTO GROUND
• HONEYCOMBE GROUND*
• POLLENSA TEXTURED
• SORRENTO TEXTURED
• HONEYCOMBE TEXTURED*
• GLACIER GROUND*
• GLACIER TEXTURED*
*Available in 40mm thickness for size 400 x 400mm
*Note colours and surface texture should be judged from actual samples rather than from those shown on brochure. The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are given as an indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
Sales: 0800 0393367
PAGE
5
KPC - Killeshal Precast
Tel: 0800 0393367 Email:
[email protected]
A/G CLASSIC GROUND FLAGS Standard sizes: - 400 x 400 x 40mm
- 600 x 400 x 40mm
• GREY
• BUFF
K/S PAVING FLAGS Standard sizes: - 400 x 300 x 50mm • CURRAGH GOLD
• RUSTIC
- 400 x 300 x 63mm
- 600 x 300 x 50mm • YELLOW
• TERRACOTTA
PAVING FLAGS
T/M RIVEN FLAGS Standard sizes: - 400 x 400 x 40mm • RUST
• GOLDEN
• CHARCOAL
• NATURAL
T/M SMOOTH FLAGS Standard sizes: - 400 x 400 x 40mm • RED
• GOLDEN
• CHARCOAL
• NATURAL
Note colours and surface texture should be judged from actual samples rather than from those shown on brochure. The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are given as an indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
PAGE
6
Visit our website: www.killeshalprecast.co.uk
KPC - Killeshal Precast Tel: 0800 0393367 Email:
[email protected]
A/G COUNTRY COBBLE Standard sizes: - 200 x 150 x 60mm
- 150 x 150 x 60mm
- 100 x 150 x 60mm
• KILLYLEAGH
• CASHEL
• CORRIB
• BURREN
• SILVER
• SLATE
A/G BOULEVARD PAVING Standard sizes: - 200 x 150 x 60mm
- 150 x 150 x 60mm
- 100 x 150 x 60mm
PAVING BRICKS
• KILLYLEAGH
• CASHEL
• CORRIB
• BURREN
• SILVER
• SLATE
A/G RECTANGULAR PAVING Standard sizes: - 200 x 100 x 60mm • CRIEVE MIX
• CREAGH PEAT BRINDLE
• AUTUMN BROWN
• ANTIQUE BROWN
• RUSTIC RED
• OLDE GOLD
• SLATE GRAY
• SILVER GRAY
*Note colours and surface texture should be judged from actual samples rather than from those shown on brochure. The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are given as an indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
Transport: 0800 0393367
PAGE
7
KPC - Killeshal Precast
Tel: 0800 0393367 Email:
[email protected]
K/S BOYNE Standard sizes: - 157 x 132 x 60mm
- 192 x 132 x 60mm
• RAVEN
• MULTI
• NATURAL
• RUSTIC
K/S LISMORE Standard sizes: - 120 x 160 x 60mm - 160 x 160 x 60mm
- 240 x 160 x 60mm - 120 x 160 x 80mm
- 160 x 160 x 80mm - 240 x 160 x 80mm
PAVING BRICKS
• TERRACOTTA
• CURRAGH GOLD
• RAVEN
• RUSTIC
• PEAT
• NATURAL
• TAN
K/S NEWGRANGE Standard sizes: - 100 x 100 x 60mm - 200 x 100 x 60mm - 200 x 200 x 60mm - 600 x 300 x 50mm
- 120 x 160 x 60mm - 160 x 160 x 80mm - 240 x 160 x 60mm
• CURRAGH GOLD
• TERRACOTTA
- 200 x 100 x 80mm - 120 x 160 x 80mm - 160 x 160 x 80mm
- 240 x 160 x 80mm - 400 x 300 x 50mm - 400 x 300 x 63mm
• RUSTIC
• YELLOW
• NATURAL
Note colours and surface texture should be judged from actual samples rather than from those shown on brochure. The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are given as an indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
PAGE
8
Visit our website: www.killeshalprecast.co.uk
KPC - Killeshal Precast
Tel: 0800 0393367 Email:
[email protected]
K/S SLANE Standard sizes: - 100 x 100 x 60mm • PEAT
- 200 x 100 x 60mm
- 200 x 100 x 80mm • YELLOW
• NATURAL
• RUSTIC
• RAVEN
• TAN
• TARA TAN
• TERRACOTTA
K/S BELLINGHAM
PAVING BRICKS
Standard sizes: - 120 x 160 x 80mm • NATURAL & RAVEN MIX
- 160 x 160 x 80mm
• RAVEN
- 240 x 160 x 80mm • TAN, RAVEN & PEAT MIX
• TERRACOTTA, RAVEN & TAN MIX
K/S MELLIFONT Standard sizes: - 120 x 160 x 60mm - 160 x 160 x 60mm • TERRACOTTA
- 240 x 160 x 60mm - 120 x 160 x 80mm
• NATURAL
• RAVEN
- 160 x 160 x 80mm - 240 x 160 x 80mm • CURRAGH GOLD
• PEAT
• RUSTIC
• TAN
The information contained in the brochure was up to date at the time of going to print. Photographs, drawings, sizes and reference numbers are given as an indication only and can be changed without notice. Killeshal Precast Concrete Ltd reserves the right to modify product specification without notice.
PAGE
9
KPC
| UK
Killeshal Precast
building into the future since 1969
Killeshal Precast Concrete Ltd. Tel: 0800 0393367 Fax: 00353 57 9353272 Email:
[email protected] Web: www.killeshalprecast.co.uk
Technical Queries: 0800 0393367