klik
digital connection system
Klik Digital Connection System
digital dimming made simple
Kdcs0203
Digital Lighting for all
There are ever increasing demands today for lighting management controls within the commercial lighting market. Driven by legislation through part L of the building regulations, increased taxes for non compliance with the climate change levy, to save on expensive energy costs or simply a desire to improve your lighting control in terms of scene setting or security. With the growing trend towards digital dimmable ballasts, scene setting and lighting control has never been easier. No longer do you need to install an expensive building management system that requires a lighting specialist to carry out the installation. With today’s technology fluorescent dimming with daylight linked occupancy sensors is within the reach of any qualified electrician.
Hills Electrical & Mechanical Contractors has given Hager's Klik LDS the seal of approval by specifying it for their striking Pyramid shaped offices in Edinburgh.
Situated in the middle of the Bilston Glen industrial estate the building aims to create a visual impact with its charcoal grey glass and shape being in stark contrast to the surrounding buildings.
Our very successful KLDS range will continue to be offered for those installations that have fluorescents with non dimmable ballasts, one such installation is shown below.
The company has worked with Hager's Klik LDS lighting installation system on numerous projects. Its fast fit and simple installation within the ceiling void made it ideal for the company's own fast track design and build project.
Emergency lighting also plugs straight into the LDS distribution box whose socket outlets accept either three or four pin Klik plugs. Future maintenance is simple with light fittings simply removed and repaired at bench level or replacement fittings plugged in.
Klik Digital Connection System
Klik have added to their market leading range of unique plug and sockets with a choice of products ideal for the electrical contractor who wants to add lighting control to his portfolio. Using a design based on our very successful Klik Lighting Distribution System (KLDS) we have introduced the Klik Digital Connection System (KDCS) a marshalling box capable of distributing power and data to 4, 6, 8, or 10 digital ballasts. KDCS can be further sub-divided into two circuits for greater flexibility. Two new Klik plugs connect the luminaires to the KDCS, a blue five pin plug for non emergency luminaires and a red auxiliary plug for emergency luminaires. All plugs are factory pre-wired with a new bespoke cable that combines the power and data cables together but allows them to be separated by a double insulation. The screen on the data cable contains a drain wire making the termination of the screening quick and easy.
Using one of our two new digital sensors OS3D for use with DSI ballasts or OS4D for use with DALI ballasts you can offer the following features: ■
Presence detection using passive infrared
■
Regulating photocell ensures a minimum maintained light level, taking account of the contribution from adjacent luminaires and daylight.
■
Choice of off delays following the last observed movement after which the lights switch off.
■
A 6 metre diameter detection pattern.
■
Hand controller for local dimming and override.
■
Semi Auto Mode, gives the option of manual switch on automatic switch off when room vacant.
■
Various options on absence:
All the options can be selected by the installer using the very simple programmer OSDP during the commissioning stage. For lighting specialists who already install lighting management systems the KDCS can be used as part of a larger system in terms of the distribution box.
Enhanced Capital Allowances Enhanced capital allowances (ECA’s) are a tax relief in the form of capital allowances on companies investments in designated energy-saving plant and machinery. The benefit to you the installer is that your customer can commission work, knowing they can claim back part of the costs, making the investment less of a risk. For more details on ECA’s and how they can be claimed contact us for an information sheet.
- dim to 25% or minimum level, then off after a further 3 hours - dim to 25% or minimum and maintain that level. Ideal for security. - dim to off progressively - dim to off immediately after the delay period elapses. Large terminal area for ease of installation.
Many options can be selected during the programming stage.
klik
digital connection system
klik
digital connection system
Klik Digital Connection System KDCS description
KDCS10
dimensions
pack qty.
cat ref.
Klik Digital Connection System KDCS 4 outlet distribution box 73mm x 222mm x 238mm
1
KDCS4
6 outlet distribution box
73mm x 222mm x 288mm
1
KDCS6
8 outlet distribution box
73mm x 222mm x 338mm
1
KDCS8
10 outlet distribution box
73mm x 222mm x 388mm
1
KDCS10
description
pack qty.
cat ref.
Pre-wired plugs with low smoke zero halogen flexible cord digital plug with 1 metre 1.0 mm2 LS0H flexible cord
10
P55/1
digital plug with 2 metre 1.0 mm2 LS0H flexible cord
10
P55/2
digital plug with 3 metre 1.0 mm2 LS0H flexible cord
5
P55/3
digital plug with 4 metre 1.0 mm2 LS0H flexible cord
5
P55/4
digital plug with 5 metre 1.0 mm2 LS0H flexible cord
5
P55/5
description
pack qty.
cat ref.
Auxiliary plugs with low smoke zero halogen flexible cord digital AX plug with 1 metre 1.0 mm2 LS0H flexible cord
10
P55AXR/1
digital AX plug with 2 metre 1.0 mm2 LS0H flexible cord
10
P55AXR/2
digital AX plug with 3 metre 1.0 mm2 LS0H flexible cord
5
P55AXR/3
digital AX plug with 4 metre 1.0 mm2 LS0H flexible cord
5
P55AXR/4
digital AX plug with 5 metre 1.0mm2 LS0H flexible cord
5
P55AXR/5
description
pack qty.
cat ref.
Occupancy sensor occupancy sensor for DSI ballasts
1
OS3/D
occupancy sensor - for DALI ballasts
1
OS4/D
infrared programming tool
1
OSDP
hand held controller
1
OSDC
Pre-wired plugs
P55
Pre-wired auxiliary plugs for emergency luminaires
P55AXR
Occupancy sensor
OS4D
klik
digital connection system
Klik Digital Connection System KDCS Two occupancy sensors per KDCS box The KDCS is capable of accepting one or two occupancy sensors, by simply moving the switch found within the terminal compartment the KDCS can be divided into circuit A and B, allowing the installer to tighten the area controlled by each sensor. Or alternatively the KDCS can be operated as one single circuit. Wiring time is reduced using KDCS as only one termination of the incoming mains and data cables is required in the very ample sized termination section. Each luminaire can then be mains and data fed via a pre-wired plug, plugged into the KDCS. All flexible cords are 1.0 mm2 Low Smoke Zero Halogen to maintain a halogen free installation from all the Klik products. Code Luminaire KDCS Occupancy Sensor
Features and Benefits of the KDCS Features
Benefits
Aluminium body, high quality construction
Robust, yet easy to install when working up ladders.
New white finish
Gives greater product visibility in the ceiling void.
Choice of mounting options
■ ■ ■ ■
vertically on drop rods horizontally on drop rods on a flat surface beneath trunking
Outlets feed emergency and non emergency luminaires
KDCS can be installed in any location.
Increases flexibility as all outlets are configured for auxiliary supply.
Large cabling compartment
Makes wiring of the KDCS very easy under site conditions.
Large terminal block
Accepts up to 5 x 4 mm cables.
Plugs have ‘click in’ locking action
Ensures security of supply.
Klik is an ‘on-load’ connector system
Luminaires can be disconnected locally.
Dual switching circuit option
Split the circuits for greater flexibility.
Separate terminals to take up to 2 digital occupancy sensors
Greater control of from one unit using either DSI or DALI protocols.
Separate terminal block for data connections
Maintains segregation between mains and data and simplifies terminations.
Main terminal layout configured to give maximum visibility
Makes termination easier.
Single fixing screw on end cap
Only one screw to be removed during installation.
End cap removes from front face
Unit can be fitted in compact spaces without Impeding the lid removal.
Features and Benefits of digital plugs Features
Benefits
New “shotgun” cable design specifically for Klik
Maintains double insulation between data and power at all times. Date cables screened to provide electrical segregation.
New blue plugs to distinguish digital plugs from standard 3 pin
Avoids problems of mixing digital with standard P22 plugs
Digital plugs with auxiliary pin
Emergency luminaires can be tested individually while standard fittings remain powered
1 to 5 metre pre-wired flex options
Save on site wiring time with factory tested leads.
All leads are LS0H
Meets highest standards of flame retardancy and smoke emissions
Cable ends crimped
Eliminate breakage and minimise on-site cable preparation
klik
digital connection system
National Sales Hotline
0870 240 2400
National Sales Faxline
0870 240 0400
National Technical Support Helpline
0870 607 6677
To arrange for your local Sales Executive to visit, call your Regional Centre Bristol Regional Centre 135 Aztec West Almondsbury Bristol BS32 4UB Tel: 01454 616245 Fax: 01454 617172
Midlands Regional Centre Hortonwood 50 Telford Shropshire TF1 7FT Tel: 01952 675615 Fax: 01952 675626
Visit our website: www.hager.co.uk e-mail us @
[email protected] [email protected] [email protected]
Falkirk Regional Centre 5a Callendar Business Park Callendar Road Falkirk FK1 1XR Tel: 01324 632128 Fax: 01324 631294
London Regional Centre Warwick House 65-66 Queen Street London EC4R 1EB Tel: 0207 3293891 Fax: 0207 3293893
Wakefield Regional Centre Brindley Way Wakefield 41 Ind. Estate Wakefield West Yorkshire WF2 0XQ Tel: 01924 871103 Fax: 01924 824429
