JESSBERGER Druckluftmembranpumpen JP-800 Air operated diaphragm pumps JP-800
JESSBERGER - Druckluftmembranpumpen - Air operated diaphragm pumps
Vorteile
Advantages
1. Förderung von aggressiven und brennbaren Substanzen, viskosen Flüssigkeiten, auch mit Feststoffanteilen sowie Medien mit Gasanteilen. 2. Einsatz speziell in explosionsgefährdeten Bereichen möglich (ATEX Zertifizierung). 3. Betriebssicherheit auch bei hoher Luftfeuchtigkeit.
1. Pumping of aggressive and flammable substances, viscous liquids also with solids and media containing gas. 2. Especially suitable for use in hazardous areas (ATEX certification). 3. Reliability even at high humidity. 4. Adjustable flow rate and head via air pressure.
4. Über Luftdruck variabel einstellbare Fördermenge und Förderhöhe.
5. Dry - running without any problems. 6. Dry self -priming.
5. Trockenlauf problemlos möglich.
7. Three suction and delivery connections.
6. Bei Trockenstart ist Selbstansaugung gewährleistet.
8. Operation with non-lubricated air.
7. Drei Anschlussmöglichkeiten für Saugund Druckseite. 8. Betrieb mit ölfreier Luft möglich. 9. Möglichkeit zur Teilung der Kollektoren. Dadurch können zwei Medien gleichzeitig gefördert werden.
9. Manifolds can be separated. Therefore two different media can be pumped at the same time. 10. Easy replacement of spare parts and maintenance by your service department.
10. Leichter Austausch von Ersatzteilen und einfache Wartung durch Ihre Service-Abteilung.
Technischer Aufbau der Pumpen Technical construction of the pumps F
E
A
Phase 1 Druckluft Compressed air
Phase 2 Saugvorgang Suction process
Druckvorgang Delivery process
A B B C2 C1
D
A = Kugeln, Kugelsitze, O-Ringe balls, ball seats, o-rings B = Pumpenkammer Pumping chamber C1 = Mediumberührte Membran Product-side diaphragm C2 = Luftberührte Membran Air-side diaphragm D = Sauganschluss Suction connection E = Druckanschluss Delivery connection F = Luftaustauscher Pneumatic exchanger
2 · JP- 800
Funktionsweise Phase 1:
Functionality Phase 1:
Die Druckluft, die hinter der Membrane zugeführt wird, drückt das Medium aus der Kammer in Richtung Druckanschluss.
The air that is supplied behind the diaphragm pushes the medium from the chamber to the delivery connection.
Gleichzeitig wird durch die Anschlusswelle die Membran „B“ mitgenommen wodurch die Ansaugung bewirkt wird.
At the same time the diaphragm “B” is pulled by the shaft. This creates the suction process.
Phase 2:
Phase 2:
Bei Hubende schaltet der Zyklus um.
Direction is reversed at stoke end.
Temperaturen/Temperatures PP 60 °C; PVDF, Alu, SS 95 °C
JP- 800.5 1/4”, 5 l/min Standard: II 3/3 GD c IIB T135 °C (Ex Zone 2) Conduct: II 2/2 GD c IIB T135 °C (Ex Zone 1)
JP-800.5 PP Technische Daten
Technical data
Druck-/Sauganschluss Luftanschluss Max. Saughöhe trocken* Max. Förderleistung* Max. Förderhöhe* Feststoffe Max. Betriebsdruck Werkstoff Gewicht
Delivery/suction connection Air connection Max. dry suction lift* Max. flow rate* Max. head* Solids Max. air supply pressure Construction material Net weight
G ¼” G 1/8”” 3m 5 l/min 70 m -7 bar PP 0,5 kg
* Abhängig vom Werkstoff
* Depending on construction material
Alle Gewinde sind Innengewinde All threads are female threads
Leistungskurve - Performance curve Betriebsdruck Air supply pressure
PP
Alle genannten Werte sind unverbindliche Richtwerte. All values shown are approximate and not binding.
Abmessungen - Dimensions
Luftverbrauch Nl/min Air consumption Nl/min
Höhe (m) - Head (m)
Luftanschluss 1/8” G Air connection 1/8” G
Druckanschluss 1/4” G Delivery connection 1/4” G
Sauganschluss 1/4” G Suction connection 1/4” G
Förderleistung l/min - Flow rate litres/min
Temperaturen/Temperatures PP 60 °C; PVDF, Alu, SS 95 °C
JP- 800 · 3
JESSBERGER - Druckluftmembranpumpen - Air operated diaphragm pumps
JP- 800.16 3/8”, 17 l/min Standard: II 3/3 GD c IIB T135 °C (Ex Zone 2) Conduct: II 2/2 GD c IIB T135 °C (Ex Zone 1)
PP
ECTFE
JP- 800.16 PP Technische Daten
Technical data
Druck-/Sauganschluss Luftanschluss Max. Saughöhe trocken * Max. Förderleistung * Max. Förderhöhe* Feststoffe Max. Betriebsdruck Werkstoff Gewicht
Delivery/suction connection Air connection Max. dry suction lift* Max. flow rate* Max. head* Solids Max. air supply pressure Construction material Net weight
G 3/8” G 3/8” 3m 17 l/min 70 m Ø max. 0,5 mm 7 bar PP/ECTFE 1,0/1,5 kg
* Abhängig vom Werkstoff
* Depending on construction material
Alle Gewinde sind Innengewinde All threads are female threads
Leistungskurve - Performance curve Betriebsdruck Air supply pressure
Alle genannten Werte sind unverbindliche Richtwerte. All values shown are approximate and not binding.
Abmessungen - Dimensions
Luftverbrauch Nl/min Air consumption Nl/min
Höhe (m) - Head (m)
Luftanschluss 3/8” G Air connection 3/8” G
Förderleistung l/min - Flow rate litres/min
4 · JP- 800
Temperaturen/Temperatures PP 60 °C; PVDF, Alu, SS 95 °C
JP- 800.30 1/2”, 30 l/min Standard: II 3/3 GD c IIB T135 °C (Ex Zone 2) Conduct: II 2/2 GD c IIB T135 °C (Ex Zone 1)
PP
PVDF
JP- 800. 30 PP Technische Daten
Edelstahl Stainless Steel
Technical data
Delivery/suction connection Druck-/Sauganschluss Air connection Luftanschluss Max. Saughöhe trocken * Max. dry suction lift* Max. flow rate* Max. Förderleistung * Max. head* Max. Förderhöhe* Solids Feststoffe Max. air supply pressure Max. Betriebsdruck Construction material Werkstoff Net weight Gewicht
G ½” G ¼” 6m 30 l/min 70 m Ø max. 2 mm 7 bar PP/PVDF/Alu/Edelstahl (SS) 1,6/1,9/2,0/3,8 kg
* Abhängig vom Werkstoff
Alle Gewinde sind Innengewinde All threads are female threads
* Depending on construction material
Leistungskurve - Performance curve Betriebsdruck Air supply pressure
Alu
Alle genannten Werte sind unverbindliche Richtwerte. All values shown are approximate and not binding.
Abmessungen - Dimensions
Luftverbrauch Nl/min Air consumption Nl/min
Höhe (m) - Head (m)
Druckanschluss 1/2” G Delivery connection 1/2” G
Sauganschluss 1/2” G Suction connection 1/2” G
PP/PVDF Förderleistung l/min - Flow rate litres/min
Temperaturen/Temperatures PP 60 °C; PVDF, Alu, SS 95 °C
JP- 800 · 5
JESSBERGER - Druckluftmembranpumpen - Air operated diaphragm pumps
JP- 800.50 1/2”, 50 l/min Standard: II 3/3 GD c IIB T135 °C (EX Zone 2) Conduct: II 2/2 GD c IIB T135 °C (EX Zone 1)
PP
Alu
PVDF
Edelstahl Stainless Steel
JP- 800. 50 PP Technische Daten
Technical data
Druck-/Sauganschluss Luftanschluss Max. Saughöhe trocken* Max. Förderleistung* Max. Förderhöhe* Feststoffe Max. Betriebsdruck Werkstoff Gewicht
Delivery/suction connection Air connection Max. dry suction lift* Max. flow rate* Max. head* Solids Max. air supply pressure Construction material Net weight
G ½” G 3/8” 5m 50 l/min 70 m Ø max. 4 mm 7 bar PP/PVDF/Alu/Edelstahl (SS) 3,6 /4,2 /4,0/ 6,5 kg
* Abhängig vom Werkstoff
* Depending on construction material
Alle Gewinde sind Innengewinde All threads are female threads
Leistungskurve - Performance curve Betriebsdruck Air supply pressure
Alle genannten Werte sind unverbindliche Richtwerte. All values shown are approximate and not binding.
Abmessungen - Dimensions
Luftverbrauch Nl/min Air consumption Nl/min
Höhe (m) - Head (m)
Druckanschluss 1/2” G Delivery connection 1/2” G
Sauganschluss 1/2” G Suction connection 1/2” G
Förderleistung l/min - Flow rate litres/min
6 · JP- 800
PP/PVDF
Temperaturen/Temperatures PP 60 °C; PVDF, Alu, SS 95 °C
JP- 800.90 1”, 100 l/min Standard: II 3/3 GD c IIB T135 °C (EX Zone 2) Conduct: II 2/2 GD c IIB T135 °C (Ex Zone 1)
Edelstahl Stainless Steel
JP- 800. 90 Edelstahl Stainless Steel Technische Daten
Technical data
Druck-/Sauganschluss Luftanschluss Max. Saughöhe trocken* Max. Förderleistung* Max. Förderhöhe* Feststoffe Max. Betriebsdruck Werkstoff Gewicht
Delivery/suction connection Air connection Max. dry suction lift* Max. flow rate* Max. head* Solids Max. air supply pressure Construction material Net weight
G 1” G 3/8” 6m 100 l/min 70 m Ø max. 4 mm 7 bar Edelstahl (SS) 10,5 kg
* Abhängig vom Werkstoff
* Depending on construction material
Alle Gewinde sind Innengewinde All threads are female threads
Leistungskurve - Performance curve Betriebsdruck Air supply pressure
Alle genannten Werte sind unverbindliche Richtwerte. All values shown are approximate and not binding.
Abmessungen - Dimensions
Luftverbrauch Nl/min Air consumption Nl/min Druckanschluss 1” G Delivery connection 1” G
Höhe (m) - Head (m)
Sauganschluss 1” G Suction connection 1” G
Förderleistung l/min - Flow rate litres/min
Temperaturen/Temperatures PP 60 °C; PVDF, Alu, SS 95 °C
JP- 800 · 7
JESSBERGER - Druckluftmembranpumpen - Air operated diaphragm pumps
JP- 800.91 1”, 100 l/min Standard: II 3/3 GD c IIB T135 °C (Ex Zone 2) Conduct: II 2/2 GD c IIB T135 °C (Ex Zone 1)
PP
Alu
JP- 800. 91 PP PVDF Technische Daten
Technical data
Druck-/Sauganschluss Luftanschluss Max. Saughöhe trocken* Max. Förderleistung* Max. Förderhöhe* Feststoffe Max. Betriebsdruck Werkstoff Gewicht
Delivery/suction connection Air connection Max. dry suction lift* Max. flow rate* Max. head* Solids Max. air supply pressure Construction material Net weight
G 1” G 3/8” 6m 100 l/min 70 m Ø max. 4 mm 7 bar PP/PVDF/Alu 5,0/6,5/6,5 kg
* Abhängig vom Werkstoff
* Depending on construction material
Alle Gewinde sind Innengewinde All threads are female threads
Leistungskurve - Performance curve Betriebsdruck Air supply pressure
Alle genannten Werte sind unverbindliche Richtwerte. All values shown are approximate and not binding.
Abmessungen - Dimensions
Luftverbrauch Nl/min Air consumption Nl/min Druckanschluss 1” G Delivery connection 1” G
Höhe (m) - Head (m)
Sauganschluss 1” G Suction connection 1” G
Alu Förderleistung l/min - Flow rate litres/min
8 · JP- 800
Temperaturen/Temperatures PP 60 °C; PVDF, Alu, SS 95 °C
JP- 800.150 1”, 150 l/min Standard: II 3/3 GD c IIB T135 °C (Ex Zone 2) Conduct: II 2/2 GD c IIB T135 °C (Ex Zone 1)
PP
Technische Daten
Technical data
Druck-/Sauganschluss Luftanschluss Max. Saughöhe trocken* Max. Förderleistung* Max. Förderhöhe* Feststoffe Max. Betriebsdruck Werkstoff Gewicht
Delivery/suction connection Air connection Max. dry suction lift* Max. flow rate* Max. head* Solids Max. air supply pressure Construction material Net weight
G 1” G 3/8” 5m 150 l/min 70 m Ø max. 4 mm 7 bar PP/PVDF/Alu/Edelstahl (SS) 7,5/8,5/8,2/11,0 kg
* Abhängig vom Werkstoff
* Depending on construction material
Alle Gewinde sind Innengewinde All threads are female threads
Betriebsdruck Air supply pressure
Edelstahl Stainless Steel
PVDF
JP- 800.150 PP
Leistungskurve - Performance curve
Alu
Alle genannten Werte sind unverbindliche Richtwerte. All values shown are approximate and not binding.
Abmessungen - Dimensions
Luftverbrauch Nl/min Air consumption Nl/min
Höhe (m) - Head (m)
Druckanschluss 1” G Delivery connection 1” G
Luftanschluss 3/8” G Air connection 3/8” G
Sauganschluss 1” G Suction connection 1” G
PP/PVDF
Förderleistung l/min - Flow rate litres/min
Temperaturen/Temperatures PP 60 °C; PVDF, Alu, SS 95 °C
JP- 800 · 9
JESSBERGER - Druckluftmembranpumpen - Air operated diaphragm pumps
JP- 800.220 1¼”, 220 l/min Standard: II 3/3 GD c IIB T135 °C (Ex Zone 2) Conduct: II 2/2 GD c IIB T135 °C (Ex Zone 1)
PP
JP- 800. 220 PP
PVDF
Technische Daten
Technical data
Druck-/Sauganschluss Luftanschluss Max. Saughöhe trocken* Max. Förderleistung* Max. Förderhöhe* Feststoffe Max. Betriebsdruck Werkstoff Gewicht
Delivery/suction connection Air connection Max. dry suction lift* Max. flow rate* Max. head* Solids Max. air supply pressure Construction material Net weight
G 1¼” G ½” 5m 220 l/min 70 m Ø max. 5 mm 7 bar PP/PVDF/Alu/Edelstahl (SS) 12,0/14,0/16,0/21,0 kg
* Abhängig vom Werkstoff
* Depending on construction material
Alle Gewinde sind Innengewinde All threads are female threads
Leistungskurve - Performance curve Betriebsdruck Air supply pressure
Alle genannten Werte sind unverbindliche Richtwerte. All values shown are approximate and not binding.
Druckanschluss 1 1/4” G Delivery connection 1 1/4” G
Höhe (m) - Head (m)
Luftanschluss 1/2” G Air connection 1/2” G
10 · JP- 800
Edelstahl Stainless Steel
Maße - Dimensions
Luftverbrauch Nl/min Air consumption Nl/min
Förderleistung l/min - Flow rate litres/min
Alu
Sauganschluss 1 1/4” G Suction connection 1 1/4” G
Alu
Temperaturen/Temperatures PP 60 °C; PVDF, Alu, SS 95 °C
JP- 800.340 1½”, 340 l/min Standard: II 3/3 GD c IIB T135 °C (Ex Zone 2) Conduct: II 2/2 GD c IIB T135 °C (Ex Zone 1)
PP
JP- 800. 340 PP
PVDF
Technische Daten
Technical data
Druck-/Sauganschluss Luftanschluss Max. Saughöhe trocken* Max. Förderleistung* Max. Förderhöhe* Feststoffe Max. Betriebsdruck Werkstoff Gewicht
Delivery/suction connection Air connection Max. dry suction lift* Max. flow rate* Max. head* Solids Max. air supply pressure Construction material Net weight
G 1½” G ½” 6m 340 l/min 70 m Ø max. 6 mm 7 bar PP/PVDF 16,0/20,0 kg
* Abhängig vom Werkstoff
* Depending on construction material
Alle Gewinde sind Innengewinde All threads are female threads
Leistungskurve - Performance curve Betriebsdruck Air supply pressure
Alle genannten Werte sind unverbindliche Richtwerte. All values shown are approximate and not binding.
Maße - Dimensions
Luftverbrauch Nl/min Air consumption Nl/min
Druckanschluss 1 1/2” G Delivery connection 1 1/2” G
Höhe (m) - Head (m)
Luftanschluss 1/2” G Air connection 1/2” G
Sauganschluss 1 1/2” G Suction connection 1 1/2” G
Förderleistung l/min - Flow rate litres/min
Temperaturen/Temperatures PP 60 °C; PVDF, Alu, SS 95 °C
JP- 800 · 11
JESSBERGER - Druckluftmembranpumpen - Air operated diaphragm pumps
JP- 800.341 1½”, 340 l/min Standard: II 3/3 GD c IIB T135 °C (Ex Zone 2) Conduct: II 2/2 GD c IIB T135 °C (Ex Zone 1)
Alu
JP- 800. 341 Alu Edelstahl Stainless Steel
Technische Daten
Technical data
Druck-/Sauganschluss Luftanschluss Max. Saughöhe trocken* Max. Förderleistung* Max. Förderhöhe* Feststoffe Max. Betriebsdruck Werkstoff Gewicht
Delivery/suction connection Air connection Max. dry suction lift* Max. flow rate* Max. head* Solids Max. air supply pressure Construction material Net weight
G 1½” G ½” 6m 340 l/min 70 m Ø max. 6 mm 7 bar Alu/Edelstahl (SS) 21,0/32,0 kg
* Abhängig vom Werkstoff
* Depending on construction material
Alle Gewinde sind Innengewinde All threads are female threads
Leistungskurve - Performance curve Betriebsdruck Air supply pressure
Druckanschluss 1 1/2” G Delivery connection 1 1/2” G
Höhe (m) - Head (m)
Luftanschluss 1/2” G Air connection 1/2” G
12 · JP- 800
All values shown are approximate and not binding.
Abmessungen - Dimensions
Luftverbrauch Nl/min Air consumption Nl/min
Förderleistung l/min - Flow rate litres/min
Alle genannten Werte sind unverbindliche Richtwerte.
Sauganschluss 1 1/2” G Suction connection 1 1/2” G
Edelstahl (SS)
Temperaturen/Temperatures PP 60 °C; PVDF, Alu, SS 95 °C
JP- 800.650 2”, 650 l/min Standard: II 3/3 GD c IIB T135 °C (Ex Zone 2) Conduct: II 2/2 GD c IIB T135 °C (Ex Zone 1)
JP- 800. 650 PP
PP
Alu
PVDF
Edelstahl Stainless Steel
Technische Daten
Technical data
Druck-/Sauganschluss Luftanschluss Max. Saughöhe trocken* Max. Förderleistung* Max. Förderhöhe* Feststoffe Max. Betriebsdruck Werkstoff Gewicht
Delivery/suction connection Air connection Max. dry suction lift* Max. flow rate* Max. head* Solids Max. air supply pressure Construction material Net weight
G 2” G ½” 4m 650 l/min 70 m Ø max. 8 mm 7 bar PP/PVDF/Alu/Edelstahl (SS) 48,0/65,0/49,0/54,0 kg
* Abhängig vom Werkstoff
* Depending on construction material
Alle Gewinde sind Innengewinde All threads are female threads
Leistungskurve - Performance curve Betriebsdruck Air supply pressure
Luftverbrauch Nl/min Air consumption Nl/min
Alle genannten Werte sind unverbindliche Richtwerte. All values shown are approximate and not binding.
Abmessungen - Dimensions Druckanschluss 2” G Delivery connection 2” G
Höhe (m) - Head (m)
Luftanschluss 1/2” G Air connection 1/2” G
Sauganschluss 2” G Suction connection 2” G
Förderleistung l/min - Flow rate litres/min PP/PVDF
Temperaturen/Temperatures PP 60 °C; PVDF, Alu, SS 95 °C
JP- 800 · 13
JESSBERGER - Druckluftmembranpumpen - Air operated diaphragm pumps
JP- 800.850 3”, 900 l/min Standard: II 3/3 GD c IIB T135 °C (Ex Zone 2) Conduct: II 2/2 GD c IIB T135 °C (Ex Zone 1)
Alu
PP
PVDF
Edelstahl Stainless Steel
JP- 800. 850 PP Technische Daten
Technical data
Druck-/Sauganschluss Luftanschluss Max. Saughöhe trocken* Max. Förderleistung* Max. Förderhöhe* Feststoffe Max. Betriebsdruck Werkstoff Gewicht
Delivery/suction connection Air connection Max. dry suction lift* Max. flow rate* Max. head* Solids Max. air supply pressure Construction material Net weight
G 3” G ¾” 5m 900 l/min 70 m Ø max. 10 mm 7 bar PP/PVDF/Alu/Edelstahl (SS) 50,0/67,0/66,0/74,0 kg
* Abhängig vom Werkstoff
* Depending on construction material
Alle Gewinde sind Innengewinde All threads are female threads
Leistungskurve - Performance curve Betriebsdruck Air supply pressure
Luftverbrauch Nl/min Air consumption Nl/min
Alle genannten Werte sind unverbindliche Richtwerte. All values shown are approximate and not binding.
Abmessungen - Dimensions Druckanschluss 3” G Delivery connection 3” G
Höhe (m) - Head (m)
Luftanschluss 3/4” G Air connection 3/4” G
Sauganschluss 3” G Suction connection 3” G
Alu Förderleistung l/min - Flow rate litres/min
14 · JP- 800
Temperaturen/Temperatures PP 60 °C; PVDF, Alu, SS 95 °C
Druckluft-Membranpumpen für Lebensmittel Food-processing diaphragm pumps
JP-800.30 Food Werkstoff: Edelstahl, elektropoliert Construction material: Stainless Steel electro-polished
Technische Daten
Technical data
Druck-/Sauganschluss Luftanschluss Max. Saughöhe trocken Max. Förderleistung Max. Förderhöhe Max. Betriebsdruck Abmessungen Max. Ø für Feststoffe
Discharge/suction connection Air connection Max. dry suction lift Max. flow rate Max. head Max. air supply pressure Dimensions Max. Ø of passing solids
G ½”* G ¼” 6m 30 l/min 70 m 7 bar 165 x 168 x 120 mm 2 mm
Höhe (m) - Head (m)
Förderleistung l/min - Flow rate litres/min
Standard: II 3/3 GD c IIB T135 °C (EX Zone 2) Conduct: II 2/2 GD c IIB T135 °C (EX Zone 1)
Betriebsdruck - Air supply pressure Luftverbrauch Nl/min - Air consumption Nl/min
JP-800.50 Food Werkstoff: Edelstahl, elektropoliert Construction material: Stainless Steel electro-polished
Druck-/Sauganschluss Luftanschluss Max. Saughöhe trocken Max. Förderleistung Max. Förderhöhe Max. Betriebsdruck Abmessungen Max. Ø für Feststoffe
Discharge/suction connection Air connection Max. dry suction lift Max. flow rate Max. head Max. air supply pressure Dimensions Max. Ø of passing solids
G ½”* G 3/8” 5m 50 l/min 70 m 7 bar 247 x 241 x 153 mm 4 mm
Höhe (m) - Head (m)
Förderleistung l/min - Flow rate litres/min
Standard: II 3/3 GD c IIB T135 °C (Ex Zone 2) Conduct: II 2/2 GD c IIB T135 °C (Ex Zone 1)
Betriebsdruck - Air supply pressure Luftverbrauch Nl/min - Air consumption Nl/min
JP-800.90 Food Werkstoff: Edelstahl, elektropoliert Construction material: Stainless Steel electro-polished
Druck-/Sauganschluss Luftanschluss Max. Saughöhe trocken Max. Förderleistung Max. Förderhöhe Max. Betriebsdruck Abmessungen Max. Ø für Feststoffe
Discharge/suction connection Air connection Max. dry suction lift Max. flow rate Max. head Max. air supply pressure Dimensions Max. Ø of passing solids
G 1”* G 3/8” 6m 100 l/min 70 m 7 bar 308 x 274 x 170 mm 4 mm
Höhe (m) - Head (m)
Förderleistung l/min - Flow rate litres/min
Standard: II 3/3 GD c IIB T135 °C (EX Zone 2) Conduct: II 2/2 GD c IIB T135 °C (Ex Zone 1)
Betriebsdruck - Air supply pressure Luftverbrauch Nl/min - Air consumption Nl/min
JP-800.150 Food Werkstoff: Edelstahl, elektropoliert Construction material: Stainless Steel electro-polished
Druck-/Sauganschluss Luftanschluss Max. Saughöhe trocken Max. Förderleistung Max. Förderhöhe Max. Betriebsdruck Abmessungen Max. Ø für Feststoffe
Discharge/suction connection Air connection Max. dry suction lift Max. flow rate Max. head Max. air supply pressure Size Max. Ø of passing solids
G 1”* G 3/8” 5m 150 l/min 70 m 7 bar 329 x 325 x 202 mm 4 mm
Höhe (m) - Head (m)
Förderleistung l/min - Flow rate litres/min
Standard: II 3/3 GD c IIB T135 °C (Ex Zone 2) Conduct: II 2/2 GD c IIB T135 °C (Ex Zone 1)
*erhältlich mit Tri-Clamp-Anschlüssen oder DIN-Anschlüssen auf Anfrage *available with triclamp or DIN-connections on request
FDA konform compliant
Betriebsdruck - Air supply pressure Luftverbrauch Nl/min - Air consumption Nl/min
Alle Gewinde sind Innengewinde All threads are female threads
JP- 800 · 15
Druckluft-Membranpumpen für Lebensmittel - Food-processing diaphragm pumps
JP-800.220 Food Werkstoff: Edelstahl, elektropoliert Construction material: Stainless Steel electro-polished
Technische Daten
Technical data
Druck-/Sauganschluss Luftanschluss Max. Saughöhe trocken Max. Förderleistung Max. Förderhöhe Max. Betriebsdruck Abmessungen Max. Ø für Feststoffe
Discharge/suction connection Air connection Max. dry suction lift Max. flow rate Max. head Max. air supply pressure Dimensions Max. Ø of passing solids
G 1¼”* G ½” 5m 220 l/min 70 m 7 bar 399 x 386 x 220 mm 5 mm
Höhe (m) - Head (m)
Förderleistung l/min - Flow rate litres/min
Standard: II 3/3 GD c IIB T135 °C (Ex Zone 2) Conduct: II 2/2 GD c IIB T135 °C (Ex Zone 1)
Betriebsdruck - Air supply pressure Luftverbrauch Nl/min - Air consumption Nl/min
JP-800.341 Food Werkstoff: Edelstahl, elektropoliert Construction material: Stainless Steel electro-polished
Druck-/Sauganschluss Luftanschluss Max. Saughöhe trocken Max. Förderleistung Max. Förderhöhe Max. Betriebsdruck Abmessungen Max. Ø für Feststoffe
Discharge/suction connection Air connection Max. dry suction lift Max. flow rate Max. head Max. air supply pressure Dimensions Max. Ø of passing solids
G 1½”* G ½” 6m 340 l/min 70 m 7 bar 493 x 493 x 254 mm 8 mm
Höhe (m) - Head (m)
Förderleistung l/min - Flow rate litres/min
Standard: II 3/3 GD c IIB T135 °C (Ex Zone 2) Conduct: II 2/2 GD c IIB T135 °C (Ex Zone 1)
Betriebsdruck - Air supply pressure Luftverbrauch Nl/min - Air consumption Nl/min
JP-800.650 Food Werkstoff: Edelstahl, elektropoliert Construction material: Stainless Steel electro-polished
Druck-/Sauganschluss Luftanschluss Max. Saughöhe trocken Max. Förderleistung Max. Förderhöhe Max. Betriebsdruck Abmessungen Max. Ø für Feststoffe
Discharge/suction connection Air connection Max. dry suction lift Max. flow rate Max. head Max. air supply pressure Dimensions Max. Ø of passing solids
G 2”* G ½” 4m 650 l/min 70 m 7 bar 570 x 705 x 404 mm 8 mm
Höhe (m) - Head (m)
Förderleistung l/min - Flow rate litres/min
Standard: II 3/3 GD c IIB T135 °C (Ex Zone 2) Conduct: II 2/2 GD c IIB T135 °C (Ex Zone 1)
Betriebsdruck - Air supply pressure Luftverbrauch Nl/min - Air consumption Nl/min
JP-800.850 Food Werkstoff: Edelstahl, elektropoliert Construction material: Stainless Steel electro-polished
Druck-/Sauganschluss Luftanschluss Max. Saughöhe trocken Max. Förderleistung Max. Förderhöhe Max. Betriebsdruck Abmessungen Max. Ø für Feststoffe
Pressure/suction connection Air connection Max. dry suction lift Max. flow rate Max. head Max. air supply pressure Dimensions Max. Ø of passing solids
G 3”* G ¾” 5m 900 l/min 70 m 7 bar 585 x 726 x 404 mm 10 mm
Höhe (m) - Head (m)
Förderleistung l/min - Flow rate litres/min
Standard: II 3/3 GD c IIB T135 °C (Ex Zone 2) Conduct: II 2/2 GD c IIB T135 °C (Ex Zone 1)
16 · JP- 800
Alle Gewinde sind Innengewinde All threads are female threads
FDA konform compliant
Betriebsdruck - Air supply pressure Luftverbrauch Nl/min - Air consumption Nl/min
*erhältlich mit Tri-Clamp-Anschlüssen oder DIN-Anschlüssen auf Anfrage *available with triclamp or DIN-connections on request
Pulsationsdämpfer Pulsation dampeners Max. Betriebsdruck Verwendungsmöglichkeit Max. air supply Applicability pressure
Gewicht Weight
Max. Temperatur Max. operating temperature
Abmessungen Dimensions mm
JP-800.5 PP JP-800.16 PP JP-800.30 PP
0,5 kg
60 °C
121 x 117
7 bar
JP-800.16 ECTFE JP-800.30 PVDF JP-800.30 SS
0,5 kg
95 °C
121 x 117
Ø 6 mm
7 bar
JP-800.30 Alu
0,6 kg
95 °C
121 x 117
Ø 6 mm
7 bar
JP-800.50 PP JP-800.91 PP
1,5 kg
60 °C
177 x 170
1,7 kg
95 °C
177 x 170
Anschluss Connection
Luftanschluss Air connection
G ¾”
Ø 6 mm
7 bar
G ¾”
Ø 6 mm
G ¾”
G 1”
E Q UA F LU X 51
PP
PVDF
E Q UA F LU X 10 0
PPS-V
PP
G 1”
Ø 6 mm
7 bar
JP-800.50 SS JP-800.50 PVDF JP-800.91 PVDF JP-800.90 SS
G 1”
Ø 6 mm
7 bar
JP-800.50 Alu JP-800.91 Alu
1,7 kg
95 °C
177 x 170
G 1½”
Ø 6 mm
7 bar
JP-800.150 PP JP-800.220 PP JP-800.340 PP
3,8 kg
60 °C
283,2 x 254
PVDF
EQUAFLUX 2 0 0
PPS-V
PP
Standard: Conduct:
II 3/3 GD c IIB T135 °C (Ex Zone 2) II 2/2 GD c IIB T135 °C (Ex Zone 1)
JP- 800 · 17
JESSBERGER - Pulsationsdämpfer - Pulsation dampeners
E Q UA F LU X 2 0 0
Anschluss Connection
Luftanschluss Air connection
Max. Betriebsdruck Verwendungsmöglichkeit Max. air supply Applicability pressure
Gewicht Weight
Max. Temperatur Max. operating temperature
Abmessungen Dimensions mm
4,5 kg
95 °C
283,2 x 254
G 1½”
Ø 6 mm
7 bar
JP-800.150 PVDF/SS JP-800.220 PVDF/SS JP-800.340 PVDF JP-800.341 SS
G 1½”
Ø 6 mm
7 bar
JP-800.150 Alu JP-800.220 Alu JP-800.341 Alu
4,5 kg
95 °C
283,2 x 254
G 2”
Ø 8 mm
7 bar
JP-800.650 PP
23 kg
60 °C
398 x 516
G 2”
Ø 8 mm
7 bar
JP-800.650 PVDF
28,5 kg
95 °C
398 x 516
G 2”
Ø 8 mm
7 bar
JP-800.650 Alu
26 kg
95 °C
398 x 516
G 2”
Ø 8 mm
7 bar
JP-800.650 SS
32 kg
95 °C
398 x 516
G 3”
Ø 8 mm
7 bar
JP-800.850 PP
23 kg
60 °C
398 x 516
G 3”
Ø 8 mm
7 bar
JP-800.850 PVDF
28,5 kg
95 °C
398 x 516
PVDF
E Q UA F LU X 3 0 2
PPS-V
PP
PVDF
E Q UA F LU X 3 0 3
Alu/SS
PP
PVDF
18 · JP- 800
Standard: Conduct:
II 3/3 GD c IIB T135 °C (Ex Zone 2) II 2/2 GD c IIB T135 °C (Ex Zone 1)
Weitere Kreiselpumpen Further centrifugal pumps Magnetkreiselpumpen - Centrifugal pumps with magnetic drive MMB-N Magnetkreiselpumpen MMB-E Monobloc centrifugal pumps
MSP Selbstansaugende Magnetkreiselpumpen Self-priming monobloc centrifugal pump with magnetic drive
with magnetic drive Förderleistung Förderhöhe Leistung Werkstoff Betriebstemperatur
Capacity Head Power Materials Operating temperature
15–120 m3/h (N) 15–41 m (N) 1,5–18,5 kW PP, PVDF –40 OC - +90 OC
Förderleistung Förderhöhe Max. Ansaughöhe Leistung Werkstoff Betriebstemperatur
Capacity Head Max. suction head Power Materials Operating temperature
5 –45 m3/h 10 –27 m 4m 1,1–7,5 kW PP, PVDF –40 OC - +90 OC
Impellerpumpen - Volumetric self-priming pumps VGA Selbstansaugende Impellerpumpen
VMA Selbstansaugende Impellerpumpen Volumetric self-priming monobloc pumps Förderleistung Förderhöhe Max. Ansaughöhe Leistung Werkstoff Betriebstemperatur
Capacity Head Max. suction head Power Materials Operating temperature
mit Grundplatte und Kupplung Volumetric self-priming pumps with support and coupling
1,5–25 m3/h 1,5–30 m 4m 0,25–5,5 kW PP, PVC, PVDF –30 OC - +90 OC
Förderleistung Förderhöhe Max. Ansaughöhe Leistung Werkstoff Betriebstemperatur
Capacity Head Max. suction head Power Materials Operating temperature
1,5–25 m3/h 1,5–30 m 4m 0,25–5,5 kW PP, PVC, PVDF –30 OC - +90 OC
Horizontale Kreiselpumpen - Horizontal centrifugal pumps CMO Horizontale Kreiselpumpen
CGO Kreiselpumpen mit Grundplatte und Kupplung Centrifugal monobloc pumps with support and coupling
Centrifugal monobloc pumps
Förderleistung Förderhöhe Leistung Werkstoff Betriebstemperatur
Capacity Head Power Materials Operating temperature
5 –120 m3/h 6 –40 m 0,55–18,5 kW PP, PVDF –40 OC - +100 OC
Förderleistung Förderhöhe Leistung Werkstoff Betriebstemperatur
Centrifugal pumps according to the DIN 24256, ISO 2858, NFE 44 -121
Centrifugal monobloc pumps Capacity Head Power Materials
5 –20 m3/h 6–40 m 0,55–18,5 kW PP, PVDF –40 OC - +100 OC
CGD Horizontale Kreiselpumpen
CDM Horizontale Kreiselpumpen
Förderleistung Förderhöhe Leistung Werkstoff
Capacity Head Power Materials Operating temperature
10–170 m3/h 6–65 m 2,2–30 kW
PP, PVDF, PEHD, PVC,PTFE,Graphite Betriebstemperatur Operating temperature –60 OC - +200 OC
Förderleistung Förderhöhe Leistung Werkstoff
Capacity Head Power Materials
10–700 m3/h 5–120 m 0,75–110 kW
PP, PVDF, PEHD, PVC, PTFE,Graphite Betriebstemperatur Operating temperature –60 OC - +200 OC
Tauchkreiselpumpen - Centrifugal vertical pumps CMV Tauchkreiselpumpen
CLV
Centrifugal monobloc pumps Förderleistung Förderhöhe Max. Ansaughöhe Leistung Werkstoff Betriebstemperatur
Capacity Head Max. suction head Power Materials Operating temperature
5 –120 m3/h 6 –40 m 2m 0,55–18,5 kW PP, PVDF –30 OC - +90 OC
Capacity Head Max. suction head Power Materials Operating temperature
5 –120 m3/h 6–40 m 2m 0,55–18,5 kW PP, PVDF –30 OC - +90 OC
Centrifugal pumps with coupling
Centrifugal pumps with coupling Capacity Head Max. suction head Power Materials Operating temperature
Förderleistung Förderhöhe Max. Ansaughöhe Leistung Werkstoff Betriebstemperatur
CGV-N Tauchkreiselpumpen mit Kupplung
CGV Tauchkreiselpumpen mit Kupplung Förderleistung Förderhöhe Max. Ansaughöhe Leistung Werkstoff Betriebstemperatur
Tauchkreiselpumpen Centrifugal monobloc pumps
5–120 m /h 6–40 m 3m 2,2–30 kW PP, PVDF –30 OC - +90 OC 3
Förderleistung Förderhöhe Max. Ansaughöhe Leistung Werkstoff Betriebstemperatur
Capacity Head Max. suction head Power Materials Operating temperature
5–450 m3/h 6–100 m 3m 0,75–110 kW PP, PVDF, PEHD –30 OC - +90 OC
JP- 800 · 19
Das komplette Lieferprogramm:
Fass - und Behälterpumpen mit Elektro oder Druckluftmotor
Druckluft - Membranpumpen JP-800 Die JESSBERGER Druckluft - Membranpumpen sind für fast alle Einsatzzwecke geeignet. Sie fördern aggressive und brennbare Substanzen, hochviskose Flüssigkeiten, auch mit Feststoffanteilen sowie Medien mit Gasanteilen.
JESSBERGER-Pumpentechnologie mit innen- und außenbelüfteten Elektromotoren oder Druckluftmotoren (auch EX- geschützt) in verschiedenen Leistungsklassen. Dichtungslose Pumpwerke aus Polypropylen, PVDF, Aluminium und Edelstahl. Tauchrohre in Standardlängen 700, 1.000, 1.200, 1.500 und 1.800 mm. Sonderlängen auf Anfrage bis 3.000 mm.
Dichtungslose Magnetkreiselpumpen Verschiedene Baugrößen, technisch ausgereifte Konstruktion, dichtungslos und umweltgerecht, für unterschiedlichste Anwendungsfälle geeignet, ruhiger, geräuscharmer Lauf, lange Lebensdauer, einfache Wartung.
Exzenterschnecken - Fass- und Behälterpumpen JP-700 mit Elektro- oder Druckluftmotor werden zum Fördern von dünnflüssigen bis hochviskosen Substanzen (max. 100.000 mPas), vorzugsweise stationär oder im Dauerbetrieb eingesetzt. Die Tauchrohre sind aus Edelstahl 1.4571, die Statore aus NBR, NBR hell, Viton, Hypalon, EPDM oder PTFE.
Vertikale Tauchkreiselpumpen Serie JP-820 Ausführungen in Polypropylen und PVDF
Horizontale Kreiselpumpen Serie JP-840 Ausführungen in Polypropylen und PVDF
Dickstoff-Dosierpumpen Mischer und Rührwerke
für dünnflüssige, viskose, neutrale und aggressive Medien mit oder ohne Feststoffe.
JESSBERGER bietet Lösungen für nahezu alle Anwendungsfälle beim Durchmischen von Fässern und Containern.
Horizontale Exzenterschneckenpumpen
Dosierpumpen
fördern Flüssigkeiten mit niedriger oder hoher Viskosität, neutral oder aggressiv, ob mit oder ohne Feststoffe oder Fasern.
Elektrische Diesel - und Heizölpumpen
Handbetätigte Fass - und Behälterpumpen sind leichte, handliche Geräte für nahezu alle dünnflüssigen Medien.
JP-02
JP-03
JP-04
JP-05
zum Betanken von Fahrzeugen, deren Motore mit Diesel oder Heizöl der Gefahrenklasse A III betrieben werden, z.B. Traktoren, Land- und Baumaschinen, Lastkraftwagen protank 25 und Motorboote. transportabel
protank 50 stationär
Schläuche Teleskop -Tauchrohr Teleskop -Tauchrohr aus PP, 480–950 aus PP, 340–900 mm JP-02 für Säuren, Lau- mm, für dünnflüssige Substanzen. gen und Chemikalien (auf Wasserbasis). Speziell geeignet JP-03 für Öle, Dieselfür Säuren und kraftstoff, Alkohol (max. 50%), Frostschutz- Laugen. mittel, Seifenlösungen, Shampoo, Wasser, etc.
Elektronischer Durchflusszähler Best.-Nr 9020
Pumpe aus Edelstahl 1.4571 mit Dichtungen aus PTFE, Tauchrohrlängen 700 oder 1.000 mm.
Universal - und Spezial - Chemieschläuche, PVC - Schläuche, PTFE -Schläuche, Mineralöl - und Lösungsmittelschläuche, gewebeverstärkt oder elektrisch leitfähig, Lebensmittelschläuche. Bitte fragen Sie an.
Speziell geeignet für brennbare Flüssigkeiten wie Lösungsmittel.
Fordern Sie bitte ausführliche Informationen über die einzelnen Bereiche des JESSBERGERLieferprogramms an. Bitte kreuzen Sie die für Sie interessanten Produktgruppen an und faxen bzw. e-mailen Sie uns diese Seite zusammen mit Ihrer Adresse.
Gehäuse aus PP. Mengenvoreins tellung oder Impulsausgang optional. Andere Werkstoffe : PVDF und Edelstahl.
JESSBERGER GmbH Es berät Sie:
Jägerweg 5 D - 85521 Ottobrunn Telefon +49 ( 0 ) 89 - 66 66 33 400 Fax +49 ( 0 ) 89 - 66 66 33 411
[email protected] www.jesspumpen.de
Technische Änderungen, auch in Farbe und Form, vorbehalten. © by JESSBERGER Printed in Germany 06/2012
Membran- oder Kolbendosierpumpen