CI/SfB
(47) Ng2 January 2010
Clay interlocking tiles
2
Clay interlocking tiles
Sandringham Burnished Red Front cover: Sandringham Burnished Red
“
Clay tiles have been used to cover roofs in Britain for around 800 years and are ever-popular for their natural beauty and durability.
Contents 2-3 4-5 6-7
Introduction Sandringham Domino
As part of Marley Eternit’s extensive clay product portfolio, the Sandringham and Domino interlocking tiles offer the aesthetic impact of clay combined with the modern benefits of precision-engineered interlocking technology.
Complemented by a range of fittings and accessories the Sandringham and Domino tiles provide a stunning finish and a complete clay roofing solution.
”
Sandringham clay interlocking tile
Precision engineered to ensure perfect edges and exact fitting. For use in new build and renovation roofing projects. The tile has a variable gauge of 20mm in the cover length and 6mm in the cover width. Irregularities in the construction of the roof can be effortlessly accommodated.
Domino clay interlocking tile
Highly engineered, high performing yet simple and rapid to install and fix. Perfectly flat and laid to broken bond giving a crisp, contemporary appearance of a small format flat tile. The tile has a variable gauge of 11mm in the cover length and 3mm in the cover width for greater flexibility.
Ashdowne Aylesham
Domino Grey
Sandringham Burnished Red
Marley Eternit's product portfolio includes a comprehensive clay range incorporating clay interlocking and plain tiles
Clay plain tiles range
Largest range of affordable clay plain 21 colours available 30º minimum pitch in the Acme tiles in the UK
Various camber and finishes available Easy to install Complementary range of fittings Single Camber and Hawkins range
and accessories
For more information on the clay plain tiles range: tel 01283 722588 e-mail
[email protected] web sampleclay.co.uk literature ‘Clay plain tiles’
Clay interlocking tiles
3
32 5m m
40 3m m
Sandringham
Sandringham Burnished Red
Description A fully interlocking, large format clay pantile. Available with variable headlock for ease of laying.
Technical data Size of tile
403mm x 325mm
Minimum pitch*
22°
Maximum pitch
60°
Minimum headlap
47mm
Maximum gauge
356mm
Cover width
282mm (nominal)
Cover length
349mm (nominal)
Covering capacity (net)
9.9 tiles/m2 at 47mm headlap
Weight of tiling (approx.)
40.6kg/m2 (0.40 kN/m2) at 47mm headlap
Battens required (net)
2.8 lin.m/m2 at 47mm headlap
Batten size recommended (fixed to BS 5534)
38 x 25mm for rafters/ supports not exceeding 450mm centres 50 x 25mm for rafters/ supports not exceeding 600mm centres
Tile nails
38mm x 3.35mm
Fixings
Tile clip and nail Eaves clip Verge clip
Colour availability
* The minimum recommended pitch and lap may be influenced by special circumstances, please refer to the Technical Advisory Service. Burnished Red
Terracotta Red
Sandringham clay fittings and accessories
403
282
450
260 Left hand verge finishing tile
450mm half round ridge tile‡
Ridge tile†
403
325
220 Sandringham tile vent
305
305mm third round ridge tile‡
‡ For use with mortar bedding (use dentil slips) or dry fix (use Universal RidgeFast/HipFast) † For mortar bedded ridges/hips (use dentil slips)
4
390 210
Clay interlocking tiles
390 210 Stop end ridge tile†
Design details
Fixing details
CAD details
literature ‘Sitework guide’ Tel 01283 722588
web
web
marleyeternit.co.uk/sandringham
advice
Email
[email protected]
marleyeternit.co.uk/cad
Tel 01283 722588
Battens at maximum 356mm gauge Minimum 47mm headlap
25mm eaves ventilation system
403 x 325mm Sandringham Pantile
• eaves ventilation to satisfy 25mm conditions
Underlay
• continuous rafter roll compresses insulation to 325mm strip of BS 8747 type 5U or equivalent UV durable underlay dressed into gutter
allow free air passage (use two rolls to compress deep insulation) • strip ventilator has discreet ventilation grille and
Felt support tray
is nailed to fascia or timber fillet Sandringham eaves clip and comb filler strip
• suitable with or without soffit board • use comb filler strip • mechanically fix all tiles at eaves
CAD detail 352
Continuous rafter roll (2 No.)
25mm over fascia strip ventilator Tilting fillet
Sandringham Verge Clip Mortar bedding in accordance with BS 5534 Sandringham Pantile Left Hand Verge Tile
Clipped and bedded verge
403 x 325mm Sandringham Pantile
• ensure undercloak does not tilt towards gable • verge overhang should be 38mm-50mm • mechanically fix all verge tiles. • fit verge clips to both left hand and right hand verges where required
CAD detail 455
Tiling batten Underlay Fibre Cement Sheet
Bedded ridge
75mm
Sandringham socketed clay ridge tile
• maximum rafter pitch 60° • mortar bed each ridge tile
403 x 325mm Sandringham Pantile
• mechanically fix all top course tiles
Dentil slip
• mechanically fix two end ridges using ridge wires
Minimum 47mm headlap
• complete ridge with stop end ridge tile
CAD detail 737
Mortar bedding in accordance with BS 5534
Underlay
Battens at maximum 356mm gauge
Clay interlocking tiles
5
Domino Natural Red
Domino
Description A flat interlocking clay tile, with a simple and strong shape providing a unique, aesthetic appeal. Available in Natural Red and Grey. † All Domino tiles and fittings are made to order.
Technical data Size of tile
437mm x 257mm
Minimum pitch*
25°
Maximum pitch
60°
Minimum headlap
83mm
Maximum gauge
354mm
Cover width
224mm (nominal)
Covering capacity (net)
12.4 tiles/m2 at 354mm max. gauge
Weight of tiling (approx.)
43.4kg/m2 (0.42 kN/m2)
Battens required (net)
2.82 lin.m/m2 (max. gauge)
Batten size recommended (fixed to BS 5534)
38 x 25mm for rafters/ supports not exceeding 450mm centres
Domino Natural Red
13.1 tiles/m2 at 343mm min. gauge
50 x 25mm for rafters/ supports not exceeding 600mm centres Tile nails
45mm x 3.35mm
Fixings
Tile clip and nail Eaves clip Verge clip
* The minimum recommended pitch and lap may be influenced by special circumstances, please refer to the Technical Advisory Service.
Colour availability
Domino clay fittings and accessories 257
144 437
437
95
95 450
450
Natural Red
Grey
280
Half tile†
6
Clay interlocking tiles
Left hand verge finishing tile†
Ridge tile†
280
Stop end ridge tile†
Design details
Fixing details
CAD details
literature ‘Sitework guide’ Tel 01283 722588
web
web
marleyeternit.co.uk/domino
advice
Email
[email protected]
marleyeternit.co.uk/cad
Tel 01283 722588
Battens at maximum 354mm gauge
437 x 257mm Domino Clay Interlocking Tile
25mm eaves ventilation system
Minimum 83mm headlap 325mm strip of BS 8747 type 5U or equivalent UV durable underlay dressed into gutter
• eaves ventilation to satisfy 25mm conditions • continuous rafter roll compresses insulation to allow free air passage (use two rolls to compress deep insulation)
Felt support tray
• strip ventilator has discreet ventilation grille and Domino Eaves Clip
is nailed to fascia or timber fillet • suitable with or without soffit board • mechanically fix all tiles at eaves
CAD detail 352
Underlay Continuous rafter roll (2 No.) 25mm over fascia strip ventilator Tilting fillet
Domino Verge Clip Mortar bedding in accordance with BS 5534 Domino Left Hand Verge Finishing Tile
Clipped and bedded verge
Domino Half Tile in alternate courses to maintain broken-bond
• maximum pitch for duo-pitch and mono-pitch roofs is 60°
437 x 257mm Domino Clay Interlocking Tile
• not suitable for raking verges • Use tile shunt and half tiles to reduce overhang to minimum • finish ridge with stop end ridge tiles
CAD detail 445
Tiling batten
Underlay
Fibre Cement Sheet
Mortar bedding in accordance with BS 5534
Bedded ridge • maximum rafter pitch 60°
Domino socketed Clay Ridge Tile
75mm
• mechanically fix all top course tiles • mechanically fix two end ridges using ridge wires • complete ridge with stop end ridge tile
CAD detail 737
437 x 257mm Domino Clay Interlocking Tile Battens at maximum 354mm gauge
This publication is based on the latest data available at the time of printing. Due to product changes, improvements and other factors, the Company reserves the right to change or withdraw information contained herein without prior notice. For specific applications users should refer to the Technical Advisory Service and relevant Standards and Codes of Practice for guidance. The photography shown in the document should not necessarily be taken as recommendations of good practice. The printing process restricts the exact representation of colours. For true colour reference, please request product samples
Underlay Minimum 83mm headlap
Clay interlocking tiles
7
Services
Technical Advisory Service
Marley Eternit Assured Roofing Specification Scheme
Marley Eternit provides a free Technical Advisory Service which is staffed by personnel with
Operated through Marley Eternit’s Technical Advisory Service,
specialist knowledge of the use of all Marley Eternit
this unrivalled and comprehensive advice and support service
roofing products and systems. Services include:
for specifiers of major roofing projects offers the following:
Fixing specifications Bespoke fixing specifications can be provided, taking into account location, dimensions and degree of exposure for individual buildings. To create your own fixing specification, visit: www.marleyeternit.co.uk/tilefix Estimating tile quantities
In-depth technical advice Project-specific fixing specifications Project-specific NBS clauses
Level of cover Marley Eternit offer 15 years cover for design performance, fixing
Calculation of all materials required for any roofing project including
specification and for product durability when correctly installed in
tiles, battens, underlay, ancillary fittings and accessories.
accordance with our recommendations and the requirements
For a materials estimate, visit: www.marleyeternit.co.uk/estimator
of BS 5534.
National Building Specification (NBS) clauses All essential clauses for Marley Eternit roof specifications are available, detailing all work items in section H65 ‘Single lap roof tiling’, H60 ‘Plain roof tiling’ and H61 ‘Fibre cement slates’.
For instant NBS clauses, visit: www.marleyeternit.co.uk/specrite T 01283 722588
E
[email protected] CAD www.marleyeternit.co.uk/CAD
Customer Services Marley Eternit is committed to providing outstanding customer care and is staffed by experienced personnel in departments dedicated to providing the following services: Advice, literature and samples
All current product and technical literature can be downloaded from: www.marleyeternit.co.uk/downloads For samples, visit: www.marleyeternit.co.uk/samples
T 01283 722588 E
[email protected] Quotations and ordering information
T 08705 626400 E
[email protected] Stockist information
To find details for stockists of Marley Eternit products,
Marley Eternit roofing ranges
Clay and concrete plain tiles Fibre cement slates Interlocking slates Clay and concrete interlocking tiles SolarTile® Ventilation and dry fix roof accessories Fittings and Accessories
Marley Eternit also offer comprehensive ranges of Claddings, Building Boards, Profiled Sheeting and Accessories. Information for all these products is available on request. www.marleyeternit.co.uk T 01283 722588
visit: www.marleyeternit.co.uk/stockists
T 08705 626400 E
[email protected]
For further information Tel 01283 722588 Fax 01283 722219 E-Mail
[email protected] www.marleyeternit.co.uk Marley Eternit Limited, Lichfield Road, Branston, Burton on Trent DE14 3HD