Item

Qty

Price (ea.)

Brewhouse: 10 BBL / 1200 L Steam 2 Vessel Micro-Brewhouse Includes: Mash / lauter tun vessel Brew kettle / whirlpool vessel with steam jackets Stainless brewhouse work platform & stairs Brewhouse tank lights Milled lauter tun floor Complete hard piped SS brewhouse manifold Enclosed wort sight glass/manometer set up for wort run off Digital SS flow meter for mash in/sparge water Cold water blend valve with analog thermometer Sanitary centrifugal wort pump - with 2 HP/1.5 KW SS motor Sanitary centrifugal grant pump - with 2 HP/1.5 KW SS motor Thermaline SS plate heat exchanger - T8-49 - water/wort SS brewhouse control panel with digital temperature controllers Variable frequency drive for BH pumps Wort aeration & sight glass assembly Mash hydrator with 4" valve Mash tun grain out chute Sparge sprayer assembly Mash tun CIP assembly Adjustable tank leveling pads

1 1 1 2 lot 1 1 1 1 1 1 1 1 2 1 1 1 1 1 8

Optional Item Optional Item Optional Item

External Open Wort Grant - 20 Gal / 80 L Add Steam Jacket to Mash/Lauter Tun 85 L Enclosed Hop Back

0 0 0

$650.00 $850.00 $3,000.00

Optional Item

Water / Glycol Pre-chiller Adds separate water/glycol brazed copper heat exchanger prior to SS process heat exchanger. Includes control valves.

0

$1,650.00

Optional Item

Mash Rakes & Grain Out Includes: 2 HP/1.5 KW gear drive Variable frequency drive Adjustable grain out plow

1

$10,500.00

Optional Item

1

$81,950.00

1 1 1

Mash / Kettle Mixer Upgrade 0 Adds mixer and controls to brew kettle to convert to multi-use vessel. Mash tun/brew kettle/whirlpool. Includes mash pump and piping to perform step mashing and transfer mash to lauter tun.

$10,500.00

510 Corporate Dr. Unit D, Escondido, CA 92029 / Ph 760-796-7999 / [email protected]

Total

$81,950.00

$10,500.00

Optional Item

Separate Whirlpool Vessel Separate whirlpool with BH platform and piping modifications

0

$13,950.00

Optional Item

Separate Mash Tun Vessel Separate mash tun with platform and piping modifications Mash mixer and SS mash transfer pump Variable frequency drive Dual steam jackets

0

$23,950.00

20 BBL / 2400 L Hot Liquor Tank - 316 SS Interior Includes: Dual steam jackets (sides and bottom) 1.5 HP / 1.1 KW SS pump with SS pump stand & TC tee VFD controller for HLT pump Tank fill level controls with Warrick conductivity sensor RTD assembly 1" Water solenoid valves - 24V (tank fill and recirculate) 1" x TC adapters 1.5" butterfly valves CIP - spray ball Level gauge assembly Clamps and gaskets Adjustable tank leveling pads

1 1 1 1 1 1 2 3 4 1 1 lot 4

Optional Item

30 BBL / 3500 L Hot Liquor Tank - 316 SS Interior

0

$16,500.00

Optional Item

20 BBL / 2400 L Cold Liquor Tank Includes: Glycol cooling jackets 3/4" glycol solenoid valve - Zero differential 1.5 HP / 1.1 KW SS pump with SS pump stand & TC tee CLT pump controls Tank fill level controls with Warrick conductivity sensor RTD assembly 1" Water solenoid valves - 24V (tank fill and recirculate) 1" x TC adapters 1.5" butterfly valves CIP - spray ball Level gauge assembly Clamps and gaskets Adjustable tank leveling pads

1

$13,950.00

lot 1 1 1 1 1 2 3 3 1 1 lot 4

30 BBL / 3500 L Cold Liquor Tank

0

Optional Item

2 2 2 $14,750.00

$14,950.00

510 Corporate Dr. Unit D, Escondido, CA 92029 / Ph 760-796-7999 / [email protected]

$14,750.00

$13,950.00

Cellar Package Includes: Goodyear brewers hose - 1.5" x 5 ft (1.5 m) length Goodyear brewers hose - 1.5" x 10 ft (3 m) length Goodyear brewers hose - 1.0" x 10 ft (3 m) length Goodyear brewers hose - 1.0" x 15 ft (4.5 m) length 1.5" Tri-clamp butterfly valve 1.5" Tri-clamp 90 deg. elbows 1.5" Tri-clamp tee 1.5" Tri-clamp 45 deg. elbow 1.5" clamps and gaskets 1.5" Tri-clamp end caps 1.5" Tri-clamp x 3/4" NPT adapter 1.5" TC sight glass Spare seal for brewhouse centrifugal pump Spare seal for portable centrifugal pump Spare seal for HLT/CLT pump Spare door gaskets for BH manway doors SS grain out hoe

Optional Item

1

$2,950.00

$2,950.00

$12,200.00

$48,800.00

1 2 2 1 4 4 2 1 30 4 2 1 1 1 1 lot 1

20 BBL / 2400 L Uni-Tank - (1.5 Bar) AS1210 Includes: 1.5" butterfly valves 2" pressure vacuum relief valve 1.5" Perlick sample valve Pressure gauge 1.5" end cap 2" end cap Shadowless manway CIP - spray ball CO2 blow off tube Rotating racking assembly 60 degree cone Multiple glycol zones Fully welded cladding Adjustable tank leveling pads

4 3 1 1 1 1 1 1 1 1 1 1 lot lot 4

10 BBL / 1200 L Uni-Tank - (1.5 Bar) AS1210

0

$9,175.00

20 BBL / 2400 L Jacketed Brite Tank - (1.5 Bar) AS1210 Includes: 1.5" butterfly valves 2" pressure vacuum relief valve 1.5" Perlick sample valve Pressure gauge 1.5" end cap Sintered SS carb stone assembly 8" - Zahm Nagel Level gauge assembly 3/8" SS ball valve for CO2 inlet Shadowless manway CIP - spray ball Multiple glycol zones Fully welded cladding Adjustable tank leveling pads

1

$11,400.00

2 1 1 1 1 1 1 1 1 1 lot lot 4

510 Corporate Dr. Unit D, Escondido, CA 92029 / Ph 760-796-7999 / [email protected]

$11,400.00

Optional Item Optional Item Optional Item

Optional Item

10 BBL / 1200 L Jacketed Brite Tank - (1.5 Bar) AS1210 10 BBL / 1200 L Brite Tank - Single Wall - (1.5 Bar) AS1210 20 BBL / 2400 L Brite Tank - Single Wall - (1.5 Bar) AS1210

0 0 0

$8,375.00 $5,675.00 $7,375.00

Cellar Control Panel (up to 8 controllers)

1

$995.00

Cellar Control Panel (up to 16 controllers) Includes: Nema 4x enclosure prewired with all controls and relays 24 VAC glycol solenoid control transformer Main power disconnect

0

$1,495.00

Dual Display, Programmable Digital Temp Controller

5

$175.00

$875.00

Stainless RTD Assembly With Spring Loaded Probe

5

$135.00

$675.00

Glycol Solenoid Valve - 3/4" Zero Differential

5

$105.00

$525.00

Malt Mill: Two Roll Malt Mill, up to 3000 lb/hr (1300 kg/hr) Includes: Adjustable grooved rolls 3 HP / 2.2 KW motor Motor starter w/ thermal overload Inlet grain bag hopper, 55 lb / 25 kg capacity Optional Item

$995.00

1 1 1

1

$4,950.00

$4,950.00

2 1 1 1

Malt Mill Stand (required without grist case mounting) Includes: 1.5" SS square tube design, adjustable feet, auger boot adapter

0

$595.00

SS Grist Case - 44 cu/ft - 1250 L Gross Capacity, Floor Unit (1 L = approx. 1 lb/0.45 kg) Includes: Mill mounting adapter, adjustable feet, auger boot adapter

1

$3,995.00

$3,995.00

Malt Auger - Chore Time M-75 3/4 HP direct drive motor 50 ft flex auger w/ PVC tube

1

$2,650.00

$2,650.00

510 Corporate Dr. Unit D, Escondido, CA 92029 / Ph 760-796-7999 / [email protected]

Optional Item Optional Item Optional Item Optional Item

Sanitary Portable Pump w/ SS Cart - 2 HP / 1.5 KW Includes: Nema 4 VFD motor control Stainless cart with handle 1.5" butterfly valve 1.5" elbow 1.5" clamps and gaskets

1

$2,800.00

2-Station, Manual Keg Washer 2-Station, Semi-Auto Keg Washer 3-Station, Semi-Auto Keg Washer 3-Station, Semi-Auto Keg Washer w/ Acid Tank

0 1 0 0

$8,500.00 $14,450.00 $17,000.00 $19,450.00

Installation & Initial Brew Supervision 1 man, 4-6 days total over 2 visits. Travel and lodging included.

1

$10,950.00

$2,800.00

1 1 1 1 2

$14,450.00

$10,950.00

Additional days at $650 per day as required. Local licensed tradesmen responsible for all connections. PRICE DOES NOT INCLUDE SHIPPING CHARGES $6,000-$9,000 per 40-45 ft shipping container Required Brewery Utilities: Electrical Supply: 400 - 415 V, 3 phase, 100-120 amps 12-15 HP Boiler. Gas input: 600,000 btu/hr supply Water: 3/4" - 1" 10-20 gpm filtered water Air, Oxygen & CO2: as needed Terms: 25% deposit, 25% @ 8-10 weeks, 50% prior to shipment Ex Factory - Escondido, CA & Shanghai 15.05.2015 Price subject to change without notice Estimated manufacturing & shipping TBD at time of order

Total System Price (USD)

$227,165.00

510 Corporate Dr. Unit D, Escondido, CA 92029 / Ph 760-796-7999 / [email protected]