IP Setup Document. (Have customer go to for this number)

C HANNEL V ISION IP Setup TM IP Setup Document Step 1: Get the answers to the following questions from the customer. These answers are required to...
Author: Charlene Clarke
1 downloads 0 Views 842KB Size
C HANNEL V ISION

IP Setup

TM

IP Setup Document

Step 1: Get the answers to the following questions from the customer. These answers are required to proceed to Step 2, with no exceptions. A.) Are you the homeowner or the installer? (If they say both we do not provide free support, they must be an actual installer/dealer installing this for a customer) B.) Router Brand: Router Part Number: Router Username: Router Password: C.) Modem Brand: Modem Part Number: Modem Username: Modem Password: D.) WAN IP:

(Have customer go to www.ipchicken.com for this number)

E.) DVR Username (if default, it is admin) DVR Password (if default, it is 123456) F.) Ask the customer if they have a Static or Dynamic IP address Step 2: Verify the customer has the right equipment to set up the IP Camera A.) Verify the customer has a CAT5 cable plugged into the IP Camera from the router or switch

CHANNEL VISION Costa Mesa CA 92626 1-800-840-0288 www.channelvision.com Title

IP Setup Document Scale

na

Sheet

Date

08/11

C HANNEL V ISION

IP Setup

TM

IP Setup Document Step 2: Describe the following steps to the customer: A.) Click the ‘Run’ icon on your computer. B.) Type in ‘cmd’ and press enter on your keyboard, or press ok.

C.) Type in ‘ipconfig /all’ into the Dos prompt that appears. Press enter. D.) Write down your computer’s IP address. For example, this computer’s IP address is 192.168.1.74. This is for reference only. Do not put this IP address into the IP Camera.

CHANNEL VISION Costa Mesa CA 92626 1-800-840-0288 www.channelvision.com Title

IP Setup Document Scale

na

Sheet

Date

08/11

IP Setup

C HANNEL V ISION

TM

IP Setup Document D.) Copy/write down the following information from the Dos prompt: 1.) Default Gateway (Example 192.168.1.1) 2.) DNS Server (if 2 servers, use the first one, for example 192.168.1.9) 3.) Subnet Mask (Example 255.255.255.0)

CHANNEL VISION Costa Mesa CA 92626 1-800-840-0288 www.channelvision.com Title

IP Setup Document Scale

na

Sheet

Date

08/11

IP Setup

C HANNEL V ISION

TM

IP Setup Document Step 3: 1.) Connect the IP camera to the switch/router. 2.) Power on the IP camera. 3.) Open “IP Installer” (Comes on the disk that came with the camera) 4.) Press “Search” 5.) Click on the “Server name” that is found in IP Installer.

CHANNEL VISION Costa Mesa CA 92626 1-800-840-0288 www.channelvision.com Title

IP Setup Document Scale

na

Sheet

Date

08/11

C HANNEL V ISION

IP Setup

TM

IP Setup Document

10.) Make sure “Static” is selected at top. 11.) Assign an IP address to the IP Camera by using the first 3 sets of numbers of your default gateway. Use exactly the same 3 sets of numbers as your default gateway that you wrote down. For Example: If the default gateway is 192.168.1.1 Then the IP Camera’s IP Address will start with 192.168.1._ Note: Last set of numbers are called the host number, not entered yet. For the host number, be sure to assign a different number than your computer’s host number (2-250) Complete the IP Camera’s IP address by entering a host number (last digits). Complete the IP Camera’s IP address by entering a host number (last digits). 12.) Enter the information you wrote down from Step 2 on page 3. A.) Subnet Mask B.) (Default) Gateway C.) DNS (Server) D.) Port (Channel Vision recommends 8000 13.) After entering the information, click “Submit” 14.) (Example) Open http://192.168.1.208:8000 in Internet Explorer http://(Your IP Camera’s IP):(port you assigned)

CHANNEL VISION Costa Mesa CA 92626 1-800-840-0288 www.channelvision.com Title

IP Setup Document Scale

na

Sheet

Date

08/11

IP Setup

C HANNEL V ISION

TM

IP Setup Document 21.) The first time you connect to the IP Camera through Internet Explorer, it will ask you to install the ActiveX control on your computer. Internet Explorer 6,7,8, or 9 must be used with this ActiveX control. However, IE 6 is very old, and will not always work. If the ActiveX control does not load, please go to “Tools” “Internet Options”, then “Security” then “Custom Level” Every area that mentions ActiveX should be “Prompt” unless it is already set to enable or disable.

CHANNEL VISION Costa Mesa CA 92626 1-800-840-0288 www.channelvision.com Title

IP Setup Document Scale

na

Sheet

Date

08/11

IP Setup

C HANNEL V ISION

TM

DDNS Setup Step 4: Go to the following web address: www.dyndns.com. 1.) Scroll down, and click the “Free Dynamic DNS” option.

2.) Click the “Get Started” Icon.

IMPORTANT NOTE: YOU WILL NEED TO CREATE A FREE ACCOUNT WITH DYNDNS.ORG

CHANNEL VISION Costa Mesa CA 92626 1-800-840-0288 www.channelvision.com Title

IP Setup Document Scale

na

Sheet

Date

08/11

C HANNEL V ISION

IP Setup

TM

DDNS Setup

3.) Under “Hostname” chose a name for the DVR. Make sure to chose the dyndns.org option 4.) “For Service Type” select “Host With IP Address”.

5.) Click “Use auto detected IP Address” (Same number can be found at www.ipchicken.com) 6.) Click “Add To Cart”

CHANNEL VISION Costa Mesa CA 92626 1-800-840-0288 www.channelvision.com Title

IP Setup Document Scale

na

Sheet

Date

08/11

IP Setup

C HANNEL V ISION

TM

DDNS Setup 7.) Click Next.

8.) Click “Activate Services”

9.) Copy “customerdvrname.dyndns.org” Please note: Your DVR web address WILL be different than “customer name”. You must choose your own name for the DVR. CHANNEL VISION Costa Mesa CA 92626 1-800-840-0288 www.channelvision.com Title

IP Setup Document Scale

na

Sheet

Date

08/11

IP Setup

C HANNEL V ISION

TM

DDNS Setup 10.) Now, add the DDNS information into the IP Camera. When on the network page of the IP Camera, click or select the “DDNS” button. 11.) Click “Apply”

CHANNEL VISION Costa Mesa CA 92626 1-800-840-0288 www.channelvision.com Title

IP Setup Document Scale

na

Sheet

Date

08/11

C HANNEL V ISION

IP Setup

TM

Port Forwarding Many routers have the ability to port forward your IP Camera allowing access to the IP camera from anywhere in the world. Below are some basic examples of port forwarding. The example below is of a SMC router. This must be completed to view on any device outside of your home or office network. Forward your router to forward a port (such as port 5400) to the internal IP address of the IP Camera Using the SMC router interface, click Advanced Setup. Click NAT and the Virtual Server page should appear as shown below. (Other routers should have a similar interface)

Port Forwarding SMC Router Enter the address of the DVR

Designate a port (should be the same port you set on the DVR)

206

Check box to enable forwarding

5400

Choose TCP from the drop down box (Transmission Control Protocol) Note: the address shown above is just an example. To activate the changes, scroll to the bottom of the page and click “Apply” and then “Restart”.

1. Click

2. Click

RESTART

APPLY

CHANNEL VISION Costa Mesa CA 92626 1-800-840-0288 www.channelvision.com Title

IP Setup Document Scale

na

Sheet

Date

08/11

C HANNEL V ISION

IP Setup

TM

Port Forwarding Below are several points of reference regarding port forwarding. 1.) Http://en.wikipedia.org/wiki/Port_forward The wikipedia page explains what port forwarding is, how it is used and what its applications are. *This website is not affiliated with Channel Vision. 2.) Http://screenshots.portforward.com/ This website contains picture by picture walkthroughs on how to port forward most routers on the market. *This website is not affiliated with Channel Vision.

Port Forwarding LG Routers In the example below, there is a IP Camera running on port 8002 on the LAN. 1.) Add the IP information, including the desired port into the port forwarding tab of “advanced” in the router 2.) Check “Enable Port Forwarding”.

IP Camera

3.) Click ‘Add”. 4.) Click “Select”.

IP Camera

5.) Select “Apply” to enable your new port forwarding rule

CHANNEL VISION Costa Mesa CA 92626 1-800-840-0288 www.channelvision.com Title 8 IP Setup Document

Scale

na

Sheet

Date

08/11

IP Setup

C HANNEL V ISION

TM

Common Issues Over the course of setting up hundreds of DVR’s and IP Cameras, we have found some routers to be problem routers. Some are companies, some are just general things to look out for. Below are a list of things to note. 1.) 2Wire modem/router combinations do not work the normal way with this DVR/IP Camera. You cannot set up the IP Camera on “LAN” and must select “DHCP” in IP Installer. Once you do this, there is a good chance that the IP Camera will show up in the 2Wire router, allowing you to port forward the IP Camera. If you give the IP Camera a LAN address, the 2Wire router will not detect it, and you cannot port forward it. 2.) Port forwarding does not work in all routers. Sometimes, a router flat out doesn’t have the ability to do port forwarding. This is very rare. However, they do exist. 3.) Port forwarding may not work in a router because it is defective. It is always possible, though very rare, that the router the customer has is defective when it comes to port forwarding 4.) Lets say you already port forwarded the router, and IP Camera should be working outside of the network. Inside of the network, the IP Camera works, however, the IP Camera does not work externally. There are many reasons this could happen, but here are the 2 most common causes of something like that: A.) The IP Camera network page is not set up properly. For example, maybe they are missing the DNS server, or the subnet mask is wrong. It will still connect internally usually, but not externally. B.) The customer unknowingly has 2 routers. No matter what you do, you cannot have 2 routers in a network if you wish to view the IP Camera outside of the network. The only exception to this is if one router is completely disabled, being used only as a wireless access point

CHANNEL VISION Costa Mesa CA 92626 1-800-840-0288 www.channelvision.com Title

IP Setup Document Scale

na

Sheet

Date

08/11

Suggest Documents