®
Insulating sheets made of CFC and HCFC free closed-cell flexible elastomeric foam (FEF) in accordance with the European Standard EN 14304. They are protected by an external PE coating with an aluminium or black embossed, scratch-resistant film, guaranteeing excellent mechanical resistance. These insulating sheets are especially suitable for the thermal insulation of refrigeration, air-conditioning and heating & plumbing services in commercial, industrial and domestic applications.
advanced elastomeric thermal and acoustic insulation materials
T E C H N I C A L D A T A S H E E T n o 0 6 - R e v. 0 4 ®
Type of material: Black closed-cell flexible elastomeric foam (FEF) coupled with a 3 mm layer of reticulated foam in PE and an exterior embossed finishing PE film in either black or aluminium in colour.
Product range: Sheets in rolls (also available in self adhesive version) with thicknesses from 6 to 50 mm (plus the 3 mm thick covering). Tapes with a thickness of 3 mm.
Fields of application: Thermal insulation of refrigeration, air-conditioning and heating & plumbing services in commercial, industrial and domestic applications.
Dimensional tolerances: In accordance with the European Standard EN 14304. Environmental Information: CFC and HCFC-free flexible and expanded rubber foam. It does not damage the ozone layer (ODP zero) and does not contribute to the greenhouse effect (GWP zero).
Storage conditions/shelf life: Store the material in a dry and clean environment at a temperature between 0 °C and 35 °C
and a RH between 50% and 70%. Do not expose the material to heat or direct sunlight before installing. Tapes and self-adhesive sheets should not be kept in storage for more than one year.
PHYSICAL PROPERTIES
TEST METHOD
RESULT OBTAINED
Operating temperature range*
-45 °C +110 °C
Thermal conductivity λ At a mean temperature of + 0 °C
≤ 0.034 W/m∙K
At a mean temperature of + 40 °C
≤ 0.038 W/m∙K
Water vapour diffusion resistance factor (μ)
≥ 10000
EN 12086
Water absorption
< 0.1 kg/m2
EN 1609
Fire performance European standard
E
EN 13501-1
UV resistance
PEAL Excellent PEN Good
UNI ISO 4892-2
Ozone resistance
Excellent
ISO 7326
Corrosion risk
Meets test requirements
EN 13468
EN 14706
EN 12667
* NB: for applications at lower temperatures please contact our technical department. For self-adhesive sheets and tapes, the maximum service temperature standard is +85 °C. For information regarding the chemical resistance of the product please consult the specific technical documentation.
System 3
Marking in accordance with the European Standard EN 14304
After intensive testing under the supervision of the GSH, Union Foam S.p.A. has been authorized to use the mark of quality, which guarantees the meeting of all requirements stipulated by System 1+, defined by the European Regulation (CPR) for construction products. All the normatives quoted in this document are updated to the latest issued versions. Union Foam S.p.A. reserves the right to modify any information at any time without prior notice.
advanced elastomeric thermal and acoustic insulation materials
C H A R A C T E R I S T I C S O F T H E P E N - P E A L C O VE R I N G S CHARACTERISTICS OF THE COVERING IN PE RETICULATED FOAM, THICKNESS 3 mm PHYSICAL PROPERTIES
TEST METHOD
Density
ISO 845
Tensile-strength resistance
ISO 1798
UNIT OF MEASURE
REFERENCE VALUES
Kg/mc
29 ±10
MPa Mpa
0,24 0,18
Squareness
%
125
Transverse
%
120
kPa kPa kPa
10% - 15 25% - 33 50% - 88
25% , 22 H , 23°C , 0.5 H
%
20
25% , 22 H , 23°C , 24 H
%
13
50% , 22 H , 23°C , 0.5 H
%
44
50% , 22 H , 23°C , 24 H
%
34
°C
100
Squareness Transverse Elongation at break
ISO 1798
Compression resistance
ISO 3386/1
Compression set
ISO 1856
Dimensional stability
ISO 2796
CHARACTERISTICS OF THE COVERING IN PE, THICKNESS 50 μm (BLACK AND/OR ALUMINIUM) PHYSICAL PROPERTIES
UNIT OF MEASURE
TEST METHOD
REFERENCE VALUES
Thickness
Test interno
μm
50
Density
Test interno
g/cm3
0.940
Tensile-strength resistance MD TD
ASTM D 882
N/mm2 N/mm2
>20.0 >18.0
Elongation MD TD
ASTM D 882
% %
>240 >560
Shrinking MD TD
120 °C x 60
% %
70.0 10.0
Melting point
DSC
°C
112
Release
FINAT 4 – TESA TAPE 7475
cN/cm
6 ±2
advanced elastomeric thermal and acoustic insulation materials
®
Thickness mm
Roll (m2/ct)
06 EUR R PEAL
6
30
10 EUR R PEAL
10
20
13 EUR R PEAL
13
14
16 EUR R PEAL
16
12
19 EUR R PEAL
19
10
25 EUR R PEAL
25
8
32 EUR R PEAL
32
6
Code
E U R O B AT E X P E N
E U R O B AT E X P E A L
PRODUCT
RANGE Thickness mm
Roll (m2/ct)
06 EUR R PEN
6
30
10 EUR R PEN
10
20
13 EUR R PEN
13
14
16 EUR R PEN
16
12
19 EUR R PEN
19
10
25 EUR R PEN
25
8
32 EUR R PEN
32
6
Thickness mm
Roll (m2/ct)
06 EUR R PEN AD
6
30
10 EUR R PEN AD
10
20
13 EUR R PEN AD
13
14
16 EUR R PEN AD
16
12
19 EUR R PEN AD
19
10
25 EUR R PEN AD
25
8
32 EUR R PEN AD
32
6
Code
Different thicknesses are available on request.
Thickness mm
Roll (m2/ct)
06 EUR R PEALAD
6
30
10 EUR R PEALAD
10
20
13 EUR R PEALAD
13
14
16 EUR R PEALAD
16
12
19 EUR R PEALAD
19
10
25 EUR R PEALAD
25
8
32 EUR R PEALAD
32
6
Code
PE N
E U R O B AT E X P E N
E U R O B AT E X P E A L
PE AL
Code
Different thicknesses are available on request.
advanced elastomeric thermal and acoustic insulation materials
®
DIMENSIONAL TOLERANCES SPECIFIED BY EUROPEAN PRODUCT STANDARD EN 14304 Form of delivery
Tubes
Sheets
Rolls Tapes
Thickness Length
± 1,5%
± 1,5%
Width
Declared
Inside diameter Squareness
Tolerance
Di ≤ 100
Di > 100
±1 ± 1,5 ± 2,5 ±3
3,0 mm
DiD + 1 ≤ Di ≤ DiD + 4
DiD + 1 ≤ Di ≤ DiD + 6
-
dD ≤ 8 8 < dD ≤ 18 18 < dD ≤ 31 dD > 31
-
-
-
±1 ± 1,5 ±2
3,0 mm/m
± 2%
dD ≤ 6 6 < dD ≤ 19 dD > 19
-
-
dD ≤ 6 6 < dD ≤ 19 dD > 19
±1 ± 1,5 ±2
-
-
dD = 3
- 0.1 + 1,5
-
-
+ 5% - 1.5%
± 2%
+ 5% - 1.5%
± 2%
(length/width)
-
3,0 mm (thickness) 3,0 mm/m
(length/width)
-
3,0 mm (thickness)
-
advanced elastomeric thermal and acoustic insulation materials