Instruction Manual 5 Port Gigabit Ethernet Switch DIANA 1000

Manual DIANA 1000 Table of content

Table of content 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1 Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.2 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.3 Performance characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.4 Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.5 Technical specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.6 Deliverables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2. Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.1 Operation and diagnostics LED´s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.1.1 Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.1.2 Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.2 LED´s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3. Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2

Version 1.0

Manual DIANA 1000 1. Introduction

Please read the safety instructions at the end of this document before assembling the equipment and taking it into operation! DAFÜR GmbH points out that the material and information in this documentation may be subject to technical changes without prior notice. In particular, the ongoing further development of the products could result in changes that are not covered by this handbook. DAFÜR GmbH assumes no liability whatsoever for printing errors or other inaccuracies in this handbook. In particular, DAFÜR GmbH advises users that this handbook only contains a general description of technical procedures and instructions which, if implemented in the described form, may not necessarily be beneficial in every conceivable situation. Consequently, DAFÜR GmbH should always be contacted if in doubt. The replication of this document in part or in whole and its translation into other languages are expressly forbidden without the prior written consent of DAFÜR GmbH.

Version 1.0

3

Manual DIANA 1000 1. Introduction

1. Introduction 1.1 Support

Phone.: Fax: Mail: WWW:

DAFÜR GmbH Zur Eisernen Hand 27 64367 Mühltal 0 61 51 / 9514-0 0 61 51 / 144 260 [email protected] http://www.dafuer.com

For questions regarding the use, installation and/or configuration of one of our products, please do not hesitate to contact us. Please be prepared to advise the following informations: • • •

name of product, serial number date of purchase configuration

1.2 General With it´s 4 1000 Base-T ethernet and it´s mini-GBIC port, the 5 port gigabit ethernet switch DIANA 1000 offers an easy to install upgrade and will greatly improve network response times as well as significantly speed up your traffic between your subnets. Gigabit ethernet is an extesnion of IEEE 802.3 ethernet and provides a tenfold increase in theoretical throughput over 100 Mbps and a hundredfold over 10 Mbps ethernet. Since gigabit ethernet is compatible with all 10 and 100 Mbps ethernet environments, gigabit ethernet provides a straightforward upgrade without wasting a company´s existing investment in hardware, software and trained personnel.

1.3 Performance characteristics • • • • • • •

Auto-Negotiation for 10/100/1000 Mbps and duplex modus Auto-MDIX for all 4 RJ 45 ports support half-/fullduplex for 10 and 100 Mbps, fullduplex for 1000 mbps 802.3x Flow Control for fullduplex, Back Pressure Flow Control for halfduplex store-and-foreward 4K MAC adresses, 1 MBit RAM for data buffering extensive front panel diagnostics LED´s

1.4 Interfaces Ethernet FO

4

4 x RJ 45 for 10/100/1000 Mbps 1 x mini GBIC

Version 1.0

Manual DIANA 1000 1. Introduction

1.5 Technical specification DC inputs

external power supply, 7,5V DC

Power consumption

< 1500 mA

Operatiing environments

Temperature 5 to 40°C Humidity10 to 90%, non-condensing

Storage environments

Temperature 0 to 60°C Humidity 5 to 95%, non-condensing

1.6 Deliverables 1 5 Port Gigabit Ethernet Switch DIANA 1000 1 external power supply 1 Manual 4 rubber feet with self adhesive backing

Version 1.0

5

Manual DIANA 1000 2. Hardware

2. Hardware 2.1 Operation and diagnostics LED´s 2.1.1 Front panel Status- and Operatingelements Comprehensive LED indicators display the condition of the switch and status of the network. 1

2

3

4

5 Link/ACT 1000Mbps

POWER mini-GBIC

100Mbps

www.dafuer.com

5-Port Gigabit Ethernet Switch DIANA 1000

2.1.2 Rear panel Ethernet interface The rear panel of the switch consists of 4 1000 Base-T ports and 1 mini-GBIC port, aswell as one DC power connector.

5

4

3

2

10/100/1000 Base T Ports

1

mini GBIC

DC Stromanschluss

2.2 LED´s

Power LED On

the switch is correctly connected to the power supply

Off

the power cord has an improper connection

Port 1 mini GBIC Status LED´s LINK/ACT On

indicates, that a mini-GBIC moduile is installed and connected to a network

Off

no link

Blinking

indicates, that the mini-GBIC module is receiving data

1000 Mbps

6

On

indicates, that the respective port is connected a 1000 Mbps gigabit ethernet

Off

the respective port is disconnected from the network

Version 1.0

Manual DIANA 1000 2. Hardware

Port 2 - 5 10/100/1000 Mbps Ethernet Status LED´s LINK/ACT On

the respective port is connected to a 10/100/1000 Mbps network

Off

no link

Blinking

indicates, that the respective is receiving or transferring date from or to the network

1000 Mbps On Off

indicates, that the respective port is connected to a 1000 Mbps network indicates, that the respecitve port is connected to a 10/100 Mbps network

100 Mbps On Off

indicates, that the respective port is connected to a 100 Mbps network the respective port is connected to a 10 Mbps or 1000 Mbps network

3. Technical data General Standards

IEEE 802.3ab, 802.3u, 802.3, 802.3z, 802.3x

Protocol

CSMA/CD

Data transfer rate

Networc cables

Number of ports

Ethernet: 10 Mbps (halfduplex), 20 Mbps (fullduplex) Fast Ethernet: 100 Mbps (halfduplex), 200 Mbps (fullduplex) Gigabit Ethernet: 2000 Mbps (fullduplex) 10 Base T: 2-Paar UTP Cat. 3, 4, 5; up to 100 m 100 Base TX: 2-Paar UTP Cat. 5; up toi 100 m 1000 Base T: 4-Paar UTP Cat. 5; up to 100 m 1000 Base SX: 62.5/125µ Multimode-FO-cable 50/1425µ Multimode-FO-cable 1000 Base LX: 10/125µ Singlemode-FO-cable 1 x mini GBIC Port 4 x 10/100/1000 Mbps Auto-MDIX UTP Ports 1 x DC power connection

Environment Power supply

7,5V, 1,5A

Power consumption

7,6 Watt

Environment conditions

0° - 40°C, Humidity 5-95%, non-condensing storage at max -10° - 70°C

Dimensions

171 x 98 x 29 mm (WHD)

Version 1.0

7

Subject to technical changes Release:10.März 2005 Instruction Manual DIANA 1000

DAFÜR GmbH Zur Eisernen Hand 27 64367 Mühltal bei Darmstadt (Hessen) Tel.: +49 (0) 61 51 / 9514-0 Fax: +49 (0) 61 51 / 14 42 60 e-Mail: [email protected]