MODEL 807 AUTO-GRIP
OWNER'S MANUAL
MODEL 807 AUTO-GRIP INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural factors only, not vehicle capacities or capabilities.
Miller Industries Towing Equipment Inc. 8503 Hilltop Drive • Ooltewah, Tennessee 37363 • (423) 238-7227 www.millerind.com
Miller Industries Towing Equipment Inc. 8503 Hilltop Drive Ooltewah, Tennessee 37363 Phone (423) 238-7227 • FAX (423) 238-7237
FORM NO. 0501109 09 / 99 PRICE $25.00
NOTES
LIMITED WARRANTY MILLER INDUSTRIES TOWING EQUIPMENT INC., hereinafter referred to as MILLER, warrants to the original purchaser that each new MILLER wrecker or other MILLER products will be free from defects in material and workmanship for a period of twelve (12) months from date placed in service, but in no event shall such warranty period exceed twenty-four (24) months from date of manufacture by MILLER. The purchaser must promptly notify MILLER in writing of any failure in material or workmanship. In no event shall MILLER accept such notification later than twenty-four (24) months from date of delivery or twelve (12) months from date placed in service, whichever is earlier. MILLER's obligation under this warranty, statutory or otherwise, is limited to the repair or replacement at the MILLER factory, or at a point designated by MILLER, of such part or parts as shall appear upon inspection by MILLER to be defective in material or workmanship. New or remanufactured parts will be used for any replacement at MILLER's option. This warranty is not transferable. This warranty does not obligate MILLER to bear the cost of labor or transportation charges in connection with the repair or replacement of any parts found to be defective, nor shall it apply to a product upon which repairs or alterations have been made unless authorized by MILLER. EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, MILLER MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND HEREBY DISCLAIMS ALL OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. MILLER shall in no event be liable for claimed downtime, claimed loss of profits or goodwill, or any other special, incidental, indirect, or consequential damages concerning or relating to any product or parts, whether based on negligence, strict liability, breach of contract, breach of warranty, misrepresentation or any other legal theory, regardless of whether the loss resulted from any general or particular requirement which MILLER knew or had reason to know about at the time of sale. MILLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE FINISHED PRODUCTS MANUFACTURED OR SUPPLIED BY ANOTHER MANUFACTURER AND SUPPLIED BY MILLER TO PURCHASER, including, but not limited to, any vehicle to which a MILLER product may be affixed or any accessories or wire rope, and MILLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AS TO SUCH EQUIPMENT OR PRODUCTS. This language shall in no way affect or diminish the rights of the purchaser to rely on such warranties as are extended by such manufacturers or suppliers. MILLER shall, to the extent permitted under applicable law, pass on to the purchaser such manufacturer's or seller's warranty. MILLER, whose policy is one of continuous improvement, reserves the right to improve its products through changes in design or materials as it may deem desirable without being obligated to incorporate such changes in products previously sold. This warranty is not intended to cover or include the following items, which are set forth by way of example and not limitation: A. Normal deterioration of trim, paint, lettering, and appearance items due to wear or exposure to weather, road conditions, road treatments, etc. B. Any damage or defect due to accident, misuse, abuse, improper or unauthorized repairs, failure to provide reasonable and necessary maintenance, or uses for which the equipment was not designed or intended. C. Alterations or modifications that affect performance, operation or reliability. D. Normal maintenance parts including, but not limited to, wear pads, bushings, wire rope, mud flaps, fenderettes, light bulbs, hydraulic oil, filters, and tow sling belts. IT IS EXPRESSLY UNDERSTOOD THAT MILLER MAKES NO IMPLIED WARRANTY THAT MILLER PRODUCTS SHALL BE FIT FOR THE PURPOSE OF LIFTING OR MOVING PEOPLE OR FOR ANY OTHER IMPROPER USE.
Miller Industries Towing Equipment Inc.
8503 Hilltop Drive Ooltewah, Tennessee 37363 Telephone (423) 238-4171
SERIAL NUMBER
REPLACEMENT PARTS
VI-1
REPLACEMENT PARTS ID NO
PART NO
--1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 --
8070002 60560 74330 74345 GX152 HC1258 0300044 0300055 0300113 0301522 0301620 0301665 0301895 0301932 0302727 0306530 0306700 0400070 0400078 0400106 0400109 0400111 0400122 0400126 0400140 0400152 0400239 0400308 0400367 0400382 0400383 0400392 0400398 0400410 0400413 0400437 0400452 0400463 0400464 0400480 0400491 0400541 0400603 0400747 0906073
DESCRIPTION KIT - BODY ASSEMBLY, SINGLE WINCH KIT - AUTO GRIP STINGER ASSEMBLY SPLITTER VALVE LOCK VALVE ELBOW, 10MJ-10MB90 TEE, 6MJ-6MB-6MJ CONNECTOR, 6MJ-8MB HOSE BARB, 12C4-12MP GREASE FITTING, 1/4"-28 CONNECTOR, 6MJ-6MB ELBOW, 6MJ-6MB90 ELBOW, 6MJ-8MP90 GREASE FITTING, 1/8" CHAIN ASSEMBLY, 5/16" X 12' CONNECTOR, 6MJ-8MP ELBOW, 10MB-12FP90 MANIFOLD BLOCK SCREW, 1/4"-20 X 1" HEX HD CAP SCREW, 1/4"-20 X 2" HEX HD CAP SCREW, 5/16"-18 X 2" HEX HD CAP SCREW, 5/16"-18 X 1" HEX HD CAP SCREW, 5/16"-16 X 2" HEX HD CAP SCREW, 3/8"-16 X 1-1/4" HEX HD CAP SCREW, 3/8"-16 X 1" HEX HD CAP SCREW, 3/8"-16 X 4" HEX HD CAP SCREW,, 3/8"-25 X 5/8" FL HD SCREW, 1/2"-13 X 3/4" HEX HD CAP SCREW, 7/8"-9 X 3-1/2" HEX HD CAP NUT, 1/4"-20NYLOK HEX NUT, 5/16"-18 NYLOK HEX NUT, 5/16"-24 HEX NUT, 3/8"-16 NYLOK HEX NUT, 3/8"-16 NYLOK HALF NUT, 1/2"-13 HEX JAM NUT, 1/2"-20 NYLOK NUT, 7/8"-9 NYLOK HEX LOCKWASHER, 1/4" HELICAL WASHER, 5/16" FLAT LOCKWASHER, 5/16" HELICAL WASHER, 3/8" FLAT LOCKWASHER, 1/2" COTTER PIN, 1/16" X 3/4" CLEVIS PIN, 3/16" X 1-1/4" SCREW, 5/16"-18 X 3/4" BN AN HD KIT - SHIP, SINGLE WINCH
VI-2
QTY
1 1 1 2 14 14 1 1 10 4 2 2 2 1 1 1 12 2 2 14 4 3 5 3 1 1 2 2 24 6 2 10 14 14 2 20 14 19 14 1 6 6 9 1
REPLACEMENT PARTS (cont'd) ID NO
PART NO
43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 -58 59 60 61 62 63 64 65 66 67 68 69 -70 71 -72 73 74 75 76 77 78 79 80 81
8610403 9015739 9043973 9048457 9056150 804345001 804370000 805040005 805290008 805351500 806030005 806030006 806030500 806031000 806031001 806032000 806037500 806462000 806463100 806463200 806463300 806463400 806463500 806463600 806500500 806501500 806502000 806758200 807040000 807041001 807041002 807135000 880010006 880010007 880010008 880010009 880010010 880061000 880090007 880100007 880460008 896770003
DESCRIPTION OUTER BOOM HOLDING VALVE SCREW, 5/16"-18 X 1-1/2" FLAT HD YOKE ASSEMBLY RETAINING RING 1-1/2" HOSE, 15" LIFT CYLINDER COVER PLATE, BOOM END HOSE, 18" PIN WELDMENT, UPPER LIFT CYLINDER BOOM GUIDE PAD, LEFT SIDE BOOM GUIDE PAD, RIGHT SIDE INNER FENDER WELDMENT, LEFT SIDE DECK COVER WELDMENT, RIGHT SIDE DECK COVER WELDMENT, LEFT SIDE KIT - FENDER MOUNTING ANGLE INNER FENDER WELDMENT, RIGHT SIDE CONTROL ROD ASSEMBLY 6-FUNCTION CONTROL ROD WELDMENT, 14-1/8" CONTROL ROD WELDMENT, 15-1/2" CONTROL ROD WELDMENT, 17" CONTROL ROD WELDMENT, 18-3/8" CONTROL ROD WELDMENT, 19-3/4" CONTROL ROD WELDMENT, 21-1/4" PIN WELDMENT, TILT CYLINDER LOWER PIN WELDMENT, RECOVERY BOOM PIVOT PIN WELDMENT, STINGER CONTROL VALVE, 6-FUNCTION KIT - BOOM ASSEMBLY, SINGLE WINCH TILT STOP TILT STOP BAR KIT - SUBFRAME WELDMENT HOSE, 40" HOSE, 25-1/2" HOSE, 25-1/2" LONG HOSE, 75" HOSE, 75" LONG WIRING HARNESS ACCESS COVER PLATE REAR REINFORCEMENT TUBE CONTROL HANDLE HOSE, 36-1/4" LONG
VI-3
QTY 1 2 12 6 1 2 2 2 1 2 1 1 1 1 1 4 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 2 1 1 1 1 1 1 2 12 2
REPLACEMENT PARTS (cont'd) ID NO
PART NO
-82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 --
8070003 60560 74330 74345 GX263 HC1258 0300044 0300055 0300113 0301522 0301620 0301665 0301895 0301932 0302727 0306530 0306700 0400070 0400078 0400106 0400109 0400111 0400122 0400126 0400140 0400152 0400239 0400308 0400367 0400382 0400383 0400392 0400398 0400410 0400413 0400437 0400452 0400463 0400464 0400480 0400491 0400541 0400603 0400747 0906074
DESCRIPTION KIT - BODY ASSEMBLY, DUAL WINCH AUTO GRIP ASSEMBLY SPLITTER VALVE LOCK VALVE ELBOW, 10MJ-10MB90 CONNECTOR, 6MJ-6MB-6MJ CONNECTOR, 6MJ-8MB HOSE BARB, 12C4-12MP GREASE FITTING, 1/4"-28 CONNECTOR, 6MJ-8MB ELBOW, 6MJ-6MB90 ELBOW, 6MJ-8MP90 GREASE FITTING, 1/8" STRAIGHT CHAIN ASSEMBLY, 5/16" X 12' CONNECTOR, 6MJ-8MP ELBOW, 10MB-12FP90 MANIFOLD BLOCK SCREW, 1/4"20 X 1" HEX HD CAP SCREW. 1/4"-20 X 2" HEX HD CAP SCREW, 5/16"-18 X 2" HEX HD CAP SCREW, 5/16"-18 X 1" HEX HD CAP SCREW, 5/16"-16 X 2" HEX HD CAP SCREW, 3/8"-16 X 1-1/4" HEX HD CAP SCREW, 3/8"-16 X 1" HEX HD CAP SCREW, 3/8"-16 X 4" HEX HD CAP SCREW, 3/8"-24 X 5/8" FT HD SCREW, 1/2"-13 X 3/4" HEX HD CAP SCREW, 7/8"-9 X 3-1/2" HEX HD CAP NUT, 1/4"-20 NYLOK HEX NUT, 5/16"-18 NYLOK HEX NUT, 5/16"-24 HEX NUT, 3/8"-16 NYLOK HEX NUT, 3/8"-16 NYLOK HEX HALF NUT, 1/2"-13 HEX JAM NUT, 1/2"-20 NYLOK NUT, 7/8"-9 NYLOK HEX LOCKWASHER, 1/4" HELICAL WASHER, 5/16" FLAT LOCKWASHER, 5/16" HELICAL WASHER, 3/8" FLAT LOCKWASHER, 1/2" HELICAL COTTER PIN, 1/16" X 3/4" CLEVIS PIN, 3/16" X 1-1/4" SCREW, 5/16"-18 X 3/4" BN AN HD KIT - SHIP
VI-4
QTY
1 1 1 1 2 14 1 1 10 4 2 2 2 1 1 1 12 2 2 14 4 3 5 3 1 1 2 2 24 7 2 10 14 14 2 20 14 19 14 1 7 7 9 1
REPLACEMENT PARTS (cont'd) ID NO
PART NO
125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 -154 155 -156 157 158 159 160 161 162 163 164 165
8610403 9015739 9043973 9048457 9056150 804345001 804370000 805040005 805290008 805351500 806030005 806030006 806030500 806031000 806031001 806032000 806037500 806461500 806463000 806463100 806463200 806463300 806463400 806463500 806463600 806500500 806501500 806502000 806758100 807040200 807041001 807041002 807135000 880010006 880010007 880010008 880010009 880010010 880061000 880090007 880100007 880460008 896770003
DESCRIPTION OUTER BOOM HOLDING VALVE SCREW, 5/16"-18 1-1/2" FLAT HD SKT YOKE ASSEMBLY w/CLEVIS RETAINING RING HOSE, 15" LIFT CYLINDER COVER PLATE HOSE, 18" PIN WELDMENT BOOM GUIDE PAD, LEFT SIDE BOOM GUIDE, RIGHT SIDE INNER FENDER, LEFT SIDE DECK COVER, RIGHT SIDE DECK COVER, LEFT SIDE FENDER MOUNTING ANGLE INNER FENDER, RIGHT SIDE CONTROL ROD ASSEMBLY, 7-FUNCTION CONTROL ROD WELDMENT, RIGHT SIDE CONTROL ROD WELDMENT, 14-1/8" CONTROL ROD WELDMENT, 15-1/2" CONTROL ROD WELDMENT, 17" CONTROL ROD WELDMENT, 18-3/8" CONTROL ROD WELDMENT, 19-3/4" CONTROL ROD WELDMENT, 21-1/4" PIN WELDMENT, TILT CYLINDER LOWER PIN WELDMENT, RECOVERY BOOM PIVOT PIN WELDMENT, STINGER CONTROL VALVE, 6-FUNCTION KIT - BOOM ASSEMBLY, DUAL WINCH TILT STOP TILT STOP BAR KIT - SUBFRAME WELDMENT HOSE, 40" HOSE, 25-1/2" HOSE, 25-1/2" LONG HOSE, 75" HOSE, 75" LONG WIRING HARNESS ACCESS COVER PLATE REAR REINFORCEMENT TUBE CONTROL HANDLE HOSE, 36-1/4" LONG
VI-5
QTY 1 2 12 7 1 2 2 2 1 2 1 1 1 1 1 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 2 1 1 2 2 1 1 2 14 2
REPLACEMENT PARTS (cont'd) ID NO
PART NO
-166 167 168 169 170 171
0906073 0501037 0902382 0906076 9016686 9048005 124001567
KIT - SHIP, SINGLE WINCH 806 WARRANTY PACKAGE KIT - STRAP ASSEMBLY KIT - SHIP KIT, SINGLE WINCH MUNCIE PUMP WIRE ROPE, 3/8" X 100' CABLE TENSIONER
1 2 1 1 1 1
-172 173 174
805031500 806070010 807750500 891000001
KIT - HYDRAULIC TANK ASSEMBLY MOUNTING BRACKET, MUD FLAP REMOTE HANDLE, 4-SWITCH w/15' CORD MUD FLAP
1 2 1 1
-175 176 --177 --178 179 180
0906074 0302916 0501037 0902382 0906076 9016686 124001813 805031500 806070010 807750500 891000001
KIT - SHIP KIT, DUAL WINCH WIRE ROPE, 3/8" X 6" X 19' WARRANTY PACKAGE KIT - STRAP ASSEMBLY KIT - SHIP KIT, DUAL WINCH MUNCIE PUMP KIT - CABLE TENSIONER KIT - HYDRAULIC TANK ASSEMBLY MOUNTING BRACKET, MUD FLAP REMOTE HANDLE, 4-SWITCH w/15' CORD MUD FLAP
2 1 2 1 1 1 1 2 1 1
--
806032000
181 182
9043717 806030002
KIT - FENDER MOUNTING ANGLE SINGLE OR DUAL WINCH NUT, 5/16"-18 WELD MOUNTING ANGLE, INNER FENDER
1 1
-183 184 185 186 187 188 189 190 191 192 193 194 195 196
807040000 0300113 0301522 0301533 0301778 0301895 0400066 0400078 0400121 0400122 0400177 0400181 0400367 0400382 0400413
KIT - BOOM ASSEMBLY, SINGLE WINCH GREASE FITTING, 1/4"-28 CONNECTOR, 6MJ-6MB TIE DOWN STRAP BUSHING, 6MJ-10MB GREASE FITTING, 1/8" SCREW, 1/4"-20 X 3/4" HEX HD CAP SCREW, 1/4"-20 X 2" HEX HD CAP SCREW, 3/8"-16 X 3/4" HEX HD CAP SCREW, 3/8"-16 X 1" HEX HD CAP SCREW, 1/2"-13 X 1" HEX HD CAP SCREW, 1/2"-13 X 1-1/2" HEX HD CAP NUT, 1/4"-20 NYLOK HEX NUT, 5/16"-18 NYLOK HEX NUT NUT, 1/2"-20 NYLOK
2 4 1 2 1 6 1 2 6 2 2 2 8 2
DESCRIPTION
VI-6
QTY
REPLACEMENT PARTS (cont'd) ID NO
PART NO
DESCRIPTION
QTY
197 198 199 200 201 202 -203 204 205 206 207 208 209 210 211 212 213 -214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237
0400451 0400452 0400464 0400491 0400613 0400614 0906092 7760006 9016734 9031088 9048136 9048166 9053713 9053739 9055125 9055275 9056125 9056150 805180000 805290007 806040001 806040002 806040004 806040005 806040006 806230000 806230004 806350000 806500002 806700000 806750105 806750106 806750107 806750108 806750109 806750110 806750111 806750112 806750113 806750114 851010003 880680000 930290002
WASHER, 1/4" FLAT LOCKWASHER, 1/4" HELICAL LOCKWASHER, 5/16" HELICAL LOCKWASHER, 1/2" HELICAL SCREW, 1/4"-20 X 1/2" AN BN HD SCREW, 5/16"-18 X 3/4" AN BN HD KIT - FREE SPOOL, SINGLE WINCH PIN, 1-1/4" X 6-5/8" MOTOR, 4-TON WEAR PAD WINCH, 4-TON CLAMP, DOUBLE TUBE FLANGE BEARING, 1-1/2" FLANGE BEARING, 2" RETAINING RING, 1-1/4" SNAP RING, 2-3/4" RETAINING RING, 1-1/4" RETAINING RING, 1-1/2" KIT - SHEAVE ASSEMBLY HOSE, 109-1/2" PAD RETAINING PLATE WEAR PAD HOSE COVER CABLE GUIDE HOSE CLAMP PLATE OUTER BOOM WELDMENT, SINGLE WINCH MOUNTING ANGLE INNER BOOM WELDMENT PIN, UPPER TILT CYLINDER STINGER TILT CYLINDER HOSE, STINGER HOSE, STINGER HOSE, MAIN BOOM EXTEND HOSE, STINGER HOSE, STINGER TILT HOSE, STINGER TILT HOSE, MAIN BOOM EXTEND HOSE, STINGER EXTEND HOSE, 156" HOSE, STINGER EXTEND ROD PIN BOOM EXTEND CYLINDER COVER PLATE
2 9 4 2 2 4 1 1 1 2 1 1 2 2 2 1 2 2 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
VI-7
REPLACEMENT PARTS (cont'd) ID NO
PART NO
-238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 -258 259 260 261 262 263 264 265 266 267 -268 269 270 271 272 273 274 275 276 277 278 279
807040200 0300113 0301522 0301533 0301778 0301895 0302936 0302937 0400066 0400078 0400121 0400122 0400177 0400367 0400382 0400451 0400452 0400464 0400491 0400613 0400614 0906030 7760006 9016734 9031088 9048166 9053713 9053739 9055125 9055275 9056125 9056150 805180000 806040001 806040002 806040004 806040005 806040006 806240000 806360000 806500002 806700000 806750105 806750106 806750107
DESCRIPTION KIT - BOOM ASSEMBLY, DUAL WINCH GREASE FITTING, 1/4"-28 CONNECTOR, 6MJ-6MB TIE DOWN STRAP BUSHING, 6MJ-10MB GREASE FITTING, 1/8" STRAIGHT WINCH ASSEMBLY, NARROW DRUM WINCH ASSEMBLY, NARROW DRUM SCREW, 1/4"-20 X 3/4" HEX HD CAP SCREW, 1/4"-20 X 2" HEX HD CAP SCREW, 3/8"-16 X 3/4" HEX HD CAP SCREW, 3/8"-16 X 1" HEX HD CAP SCREW, 1/2"-13 X 1" HEX HD CAP NUT, 1/4"-20 NYLOK HEX NUT, 5/16"-18 NYLOK HEX NUT WASHER, 1/4" FLAT LOCKWASHER, 1/4" HELICAL LOCKWASHER, 5/16" HELICAL LOCKWASHER, 1/2" HELICAL SCREW, 1/4"-20 X 1/2" AN BN HD SCREW, 5/16"-18 X 3/4" AN BN HD KIT - FREE SPOOL, DUAL WINCH PIN, 1-1/4" X 6-5/8" MOTOR, 4-TON WEAR PAD CLAMP, DOUBLE TUBE FLANGE BEARING, 1-1/2" FLANGE BEARING, 2" RETAINING RING, 1-1/4" SNAP RING, 2-3/4" RETAINING RING, 1-1/4" RETAINING RING, 1-1/2" KIT - SHEAVE ASSEMBLY PAD RETAINING PLATE WEAR PAD HOSE COVER CABLE GUIDE HOSE CLAMP PLATE OUTER BOOM WELDMENT, DUAL WINCH INNER BOOM WELDMENT PIN, UPPER TILT CYLINDER STINGER TILT CYLINDER HOSE, STINGER HOSE, STINGER HOSE, MAIN BOOM EXTEND
VI-8
QTY
4 4 2 4 1 1 1 6 1 2 12 4 3 16 4 5 4 4 2 4 1 1 2 2 1 2 2 2 2 2 2 2 1 1 1 2 1 1 1 1 1 1 1 1
REPLACEMENT PARTS (cont'd) ID NO
PART NO
280 281 282 283 284 285 286 287 288
806750108 806750109 806750110 806750111 806750112 806750113 851010003 880680000 930290002
HOSE, STINGER HOSE, STINGER TILT HOSE, STINGER TILT HOSE, MAIN BOOM EXTEND HOSE, STINGER EXTEND HOSE, 156" ROD PIN BOOM EXTEND CYLINDER COVER PLATE
1 1 1 1 1 1 1 1 1
--
807135000
289 290 291 292 293 294 295 296 297 298 -299
0400211 0400408 0400492 0400610 806030001 806130001 806160010 806160024 806160025 807110000 807160000 896050002
KIT - SUBFRAME WELDMENT, SINGLE OR DUAL SCREW, 1/2"-13 X 1-3/4 HEX HD CAP NUT, 1/2"-13 NYLOK HEX WASHER, 1/2" FLAT SCREW, 1/4"-20 X 4" PROJECTION WELD BODY SUPPORT ANGLE REAR SUPPORT ANGLE REAR SLOPING PANEL COVER PANEL, OUTSIDE LEFT SIDE COVER PANEL, OUTSIDE RIGHT SIDE SUBFRAME WELDMENT, AUTO LOAD KIT - BODY WELDMENT DUAL BOXES MOUNTING PAD, FRONT BODY
2 2 4 2 2 2 2 1 1 1 1 2
--
0902382
300 301 302 303
0200005 0302647 0302657 0302658
KIT - STRAP ASSEMBLY, SINGLE OR DUAL WINCH T-HOOK CHAIN STRAP, 1" CHAIN LINK, 1/4"
1 1 1 1
--
0906076
304 305 306 307 308 309 310 311 312 313 314
0906077 8800010 8809110 9018016 9018092 9025068 9033194 9033198 9033212 804500001 806960006
KIT - SHIP KIT, SINGLE OR DUAL WINCH KIT - BOLT BAG KIT - DECALS KIT - LIGHT PARTS HOSE CLAMP, 1-1/4" HOSE CLAMP, 1-1/2" REFLECTOR DECAL, WARNING DECAL, SAFETY CHAINS NAME PLATE, VULCAN BACK UP STRIP, MUD FLAP PLATE, CHAIN BOX
1 1 1 2 2 2 1 1 2 2 2
DESCRIPTION
VI-9
QTY
REPLACEMENT PARTS (cont'd) ID NO
PART NO
315 316 317 318
806960007 880010023 880010030 880FITTBAG
--
124001813
319 320 321 322 323 324 325
GO157 0303882 0400411 0400491 0400492 0500644 0802617
--
805031500
326 327 328 329
DESCRIPTION
QTY
PLATE, ANTI SCRATCH HOSE, 103" SUCTION HOSE, 120" KIT - BAG OF FITTINGS
2 1 1 1
CABLE TENSIONER SINGLE OR DUAL WINCH EYELET CABLE TENSIONER SPRING NUT, 1/2"-20 HEX LOCKWASHER, 1/2" HELICAL WASHER, 1/2" FLAT INSTRUCTIONS, CABLE TENSIONER PLATE SPRING
4 2 4 4 4 1 2
9012913 9018131 9018399 805031400
KIT - HYDRAULIC TANK ASSEMBLY, SINGLE OR DUAL WINCH PIPE PLUG, 3/4" MAGNETIC BREATHER CAP, 3/4" FILTER ASSEMBLY KIT - HYDRAULIC TANK WELDMENT
1 1 1 1
-330 331 332 333 334 335 336 337 338 339 340 341 342
0906092 0300845 0301532 0301588 0400126 0400150 0400393 0400482 0400492 0400537 0400546 0400560 0800779 0801672
KIT - FREE SPOOL, SINGLE WINCH SPRING CLUTCH T-HANDLE ADJUSTABLE YOKE SCREW, 3/8"-16 X 1" HEX HD CAP SCREW, 3/8"-16 X 2-1/2" NUT 3/8"-16 HEX JAM LOCKWASHER, 3/8" HELICAL WASHER, 1/2" FLAT CLEVIS PIN, 1/2" X 1-1/2" COTTER PIN, 1/8" X 1-1/4" ROLL PIN, 5/32" X 1" CRANK BELL ROD WINCH CONTROL
1 1 1 1 1 1 2 4 1 1 2 1 1
-343 344 345 346 347 348 349
0906030 DE1381 0300845 0301532 0301588 0400126 0400150 0400393
KIT - FREE SPOOL, DUAL WINCH WASHER, 1/2" SPRING CLUTCH T-HANDLE ADJUSTABLE YOKE SCREW, 3/8"-16 X 1" HEX HD CAP SCREW, 3/8"-16 X 2-1/2" HEX HD CAP NUT, 3/8"-16 HEX
8 2 2 2 2 2 2
VI-10
REPLACEMENT PARTS (cont'd) ID NO
PART NO
350 351 352 353 354 355 356
0400482 0400537 0400546 0400560 0702408 0800779 0800781
--
805180000
357 358 359 360 361
9056098 804181500 805180001 805180002 852060100
--
80711000
362 363 364 365 366 367 368 369 370 371 372 373 374
806100003 806100004 806100005 806100009 806100500 806110001 806110002 806110003 806110004 806110005 806110006 806110007 806110008
--
807160000
375 376 377 378 379 380 381 382 383 384 385
0400610 8604411 9043717 805252400 806160001 806160003 806160004 806160006 806160007 806160008 806160009
DESCRIPTION
QTY
LOCKWASHER, 3/8" HELICAL CLEVIS PIN, 1/2"-1-1/2" COTTER PIN, 1/8"-1-1/4" ROLL PIN, 5/32" X 1" CHANNEL MOUNTING CRANK BELL ROD CONTROL
8 2 2 4 2 2 2
KIT - SHEAVE ASSEMBLY, SINGLE OR DUAL WINCH RETAINING RING HOUSING CASTING SHAFT CASTING CABLE GUIDE CASTING
2 1 1 1 1
KIT - SUBFRAME WELDMENT, SINGLE OR DUAL WINCH FRONT & REAR CROSSMEMBER BOOM PIVOT PLATE, RIGHT SIDE BOOM PIVOT PLATE, LEFT SIDE MID REINFORCEMENT ANGLE LIFT CYLINDER CROSSMEMBER WELDMENT CHANNEL REINFORCEMENT, LEFT FRONT CHANNEL REINFORCEMENT, RIGHT FRONT TUBE, LEFT SIDE TUBE, RIGHT SIDE GUSSET PLATE MOUNTING ANGLE, HYDRAULIC TANK MOUNTING CHANNEL, D.C.V. MOUNTING CHANNEL, VALVE
2 1 1 2 1 1 1 1 1 4 2 1 3
KIT - BODY WELDMENT DUAL BOXES, SINGLE AND DUAL WINCH SCREW, 1/4"-20 X 4" PROJECTION WELD HARNESS TABS NUT, 5/16"-18 WELDED BACKER PLATE WELDMENT SUPPORT CHANNEL, FRONT DECK PLATE, LEFT FRONT DECK PLATE, RIGHT FRONT INSIDE PANEL, LEFT REAR INSIDE PANEL, RIGHT REAR TAIL LIGHT PANEL, LEFT TAIL LIGHT PANEL, RIGHT
4 2 6 1 1 1 1 1 1 1 1
VI-11
REPLACEMENT PARTS (cont'd) ID NO
PART NO
386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403
806160013 806160015 806160016 806160017 806160018 806160019 806160020 806160021 806160022 806160023 806160500 806161000 806161500 806167500 806168000 807160001 807160005 845400513
--
0906077
404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 -420 421 422 423 424 425
DESCRIPTION
QTY
CONTROL ROD MOUNTING PLATE CHAIN BOX POCKET, LEFT CHAIN BOX POCKET, RIGHT FILLER PLATE TAIL LIGHT COVER CHANNEL FILLER PLATE, SIDE FILLER PLATE, FRONT TOOL BOX PANEL, RIGHT TOOL BOX PANEL, LEFT END REINFORCEMENT CHANNEL, MID REAR FENDER WELDMENT, LEFT BUMPER WELDMENT, LEFT TOOL BOX WELDMENT, LEFT FENDER WELDMENT, RIGHT BUMPER WELDMENT, RIGHT SUPPORT ANGLE, REAR DECK PANEL, REAR BOX LAMP MOUNTING BRACKET
2 1 1 2 2 2 2 1 1 1 1 1 1 1 1 2 1 2
0400070 0400122 0400177 0400343 0400367 0400392 0400408 0400421 0400451 0400452 0400480 0400492 0400505 9041605 9046527 9046572
KIT - BOLT BAG, SINGLE AND DUAL WINCH SCREW, 1/4"-20 X 1" HEX HD CAP SCREW, 3/8"-16 X 1" HEX HD CAP SCREW, 1/2"-13 X 1-1/4" SCREW, 1/2"-13 X 2" HEX HD CAP NUT, 1/4"-20 NYLOK NUT, 3/8"-16 HEX NUT, 1/2"-13 NYLOK NUT, 5/8"-11 NYLOK WASHER, 1/4" FLAT LOCKWASHER, 1/4" HELICAL WASHER, 3/8" FLAT WASHER, 1/2" FLAT WASHER, 5/8" FLAT SCREW, 5/8" X 2" HEX HD CAP POP RIVET, 3/16" X 7/16" 7-7/16" POP RIVET, 1/8" X 1/2"
4 15 4 26 2 16 30 8 2 2 22 60 20 8 20 6
8800010 9033149 9033150 9033151 9033152 9033153 9033154
KIT - DECALS, SINGLE OR DUAL WINCH CONTROL KNOB DECAL, WINCH CONTROL KNOB DECAL, WINCH CONTROL KNOB DECAL, BOOM IN-OUT CONTROL KNOB DECAL, BOOM UP-DOWN CONTROL KNOB DECAL, STINGER TILT CONTROL KNOB DECAL, STINGER IN-OUT
2 2 2 2 2 2
VI-12
REPLACEMENT PARTS (cont'd) ID NO
PART NO
426 427
9033155 9033156
CONTROL KNOB DECAL, STINGER UP-DN CONTROL KNOB DECAL, WINCH
2 2
--
8809110
428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445
0300442 0301671 0303061 0303226 8603413 9022009 9022076 9025049 9025062 9025069 9025070 9025107 9025116 9025117 9025119 9032006 9032053 9032154
KIT - LIGHT PARTS, SINGLE OR DUAL WINCH LIGHT, 3 BAR TOW LIGHT SOCKET BACK-UP ALARM CIRCUIT BREAKER, 80 AMP DECK PLATE PLUG BUTT SPLICE RING TERMINAL INTERIOR & COMPARTMENT LIGHTS LICENSE PLATE BRACKET w/LIGHT TAIL LIGHT, STOP BACK-UP LIGHT GROMMET MARKER LIGHT, RED GROMMET MARKER LIGHT WEATHER STRIP GROMMET KNOB, PUSH ON
1 1 1 1 2 6 5 2 1 2 2 4 4 6 2 9 1 14
--
880FITTBAG
446 447 448 449 450 451 452 453 454
0300692 0302757 0303099 9012817 9012839 9012927 9012945 9012962 890440003
KIT - BAG OF FITTINGS, SINGLE OR DUAL WINCH ELBOW, 1" 90° STREET CONNECTOR, 8MJ-16MB ELBOW, 1" 45° STREET HOSE BARB, 3/4" X 3/4" PIPE PLUG, 1" NIPPLE, 1" X 1-1/4" TEE, 3/4" STREET PIPE, 1"-16 LOCKING PIN
1 1 1 2 1 2 1 1 2
--
805031400
455 456 457 458 459 460
9012822 9012912 9012947 805031501 805031502 814012003
KIT - HYDRAULIC TANK WELDMENT, SINGLE OR DUAL WINCH COUPLER, 1" COUPLING, 3/4" HALF COUPLING, 3/4" HALF 3000 CHANNEL, FRONT CHANNEL, REAR SUPPORT RING
2 1 1 1 1 1
DESCRIPTION
VI-13
QTY
NOTES
NOTES
MODEL 807 AUTO-GRIP
OWNER'S MANUAL
MODEL 807 AUTO-GRIP INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural factors only, not vehicle capacities or capabilities.
Miller Industries Towing Equipment Inc. 8503 Hilltop Drive • Ooltewah, Tennessee 37363 • (423) 238-7227 www.millerind.com
Miller Industries Towing Equipment Inc. 8503 Hilltop Drive Ooltewah, Tennessee 37363 Phone (423) 238-7227 • FAX (423) 238-7237
FORM NO. 0501109 09 / 99 PRICE $25.00
